Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / d0122d949d79ebcd6c4356a2f3013c226684cf36 / . / drivers / mmc / Kconfig
blob: f4fdf15242ce083405b11994d6b9bb9587a06105 [file] [log] [blame]
Nobuhiro Iwamatsu3ec5f862014-12-17 08:03:00 +0900[diff] [blame]1menu "MMC Host controller Support"
2
Maxime Ripard4f780742015-10-15 22:04:05 +0200[diff] [blame]3config MMC
Masahiro Yamadaa5ed4be2016-12-07 22:10:26 +0900[diff] [blame]4 bool "MMC/SD/SDIO card support"
5 default ARM || PPC || SANDBOX
Tom Rini9b384002021-04-21 15:32:27 -0400[diff] [blame]6 select DM_MMC if DM
Maxime Ripard4f780742015-10-15 22:04:05 +0200[diff] [blame]7 help
Masahiro Yamadaa5ed4be2016-12-07 22:10:26 +0900[diff] [blame]8 This selects MultiMediaCard, Secure Digital and Secure
9 Digital I/O support.
10
11 If you want MMC/SD/SDIO support, you should say Y here and
12 also to your specific host controller driver.
Maxime Ripard4f780742015-10-15 22:04:05 +0200[diff] [blame]13
Jean-Jacques Hiblotd0531672018-01-04 15:23:32 +0100[diff] [blame]14config MMC_WRITE
15 bool "support for MMC/SD write operations"
16 depends on MMC
17 default y
18 help
19 Enable write access to MMC and SD Cards
20
Jaehoon Chung48ad8272021-02-16 10:16:52 +0900[diff] [blame]21config MMC_PWRSEQ
22 bool "HW reset support for eMMC"
Jonas Karlmanf2ceb752024-01-27 17:12:35 +0000[diff] [blame]23 depends on PWRSEQ && DM_GPIO
Jaehoon Chung48ad8272021-02-16 10:16:52 +0900[diff] [blame]24 help
Jonas Karlmanf2ceb752024-01-27 17:12:35 +0000[diff] [blame]25 This select Hardware reset support aka pwrseq-emmc for eMMC
Jaehoon Chung48ad8272021-02-16 10:16:52 +0900[diff] [blame]26 devices.
27
Jonas Karlmanf2ceb752024-01-27 17:12:35 +0000[diff] [blame]28config SPL_MMC_PWRSEQ
29 bool "HW reset support for eMMC in SPL"
30 depends on SPL_PWRSEQ && SPL_DM_GPIO
31 default y if MMC_PWRSEQ
32 help
33 This select Hardware reset support aka pwrseq-emmc for eMMC
34 devices in SPL.
35
Jun Nieb4f4f6e2018-01-02 12:25:57 +0800[diff] [blame]36config MMC_BROKEN_CD
37 bool "Poll for broken card detection case"
38 help
39 If card detection feature is broken, just poll to detect.
40
Simon Glass1e8eb1b2015-06-23 15:38:48 -0600[diff] [blame]41config DM_MMC
42 bool "Enable MMC controllers using Driver Model"
43 depends on DM
44 help
Robert P. J. Day8d56db92016-07-15 13:44:45 -0400[diff] [blame]45 This enables the MultiMediaCard (MMC) uclass which supports MMC and
Simon Glass1e8eb1b2015-06-23 15:38:48 -0600[diff] [blame]46 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
47 and non-removable (e.g. eMMC chip) devices are supported. These
48 appear as block devices in U-Boot and can support filesystems such
49 as EXT4 and FAT.
50
Simon Glass5f4bd8c2017-07-04 13:31:19 -0600[diff] [blame]51config SPL_DM_MMC
52 bool "Enable MMC controllers using Driver Model in SPL"
53 depends on SPL_DM && DM_MMC
Pali Rohár3c5ce032022-05-24 10:58:42 +0200[diff] [blame]54 default n if ARCH_MVEBU && !MVEBU_SPL_BOOT_DEVICE_MMC
Simon Glass5f4bd8c2017-07-04 13:31:19 -0600[diff] [blame]55 default y
Oleksandr Suvorov5c59a672023-08-23 18:45:45 +0300[diff] [blame]56 select SPL_BLK
Simon Glass5f4bd8c2017-07-04 13:31:19 -0600[diff] [blame]57 help
58 This enables the MultiMediaCard (MMC) uclass which supports MMC and
59 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
60 and non-removable (e.g. eMMC chip) devices are supported. These
61 appear as block devices in U-Boot and can support filesystems such
62 as EXT4 and FAT.
63
Simon Glass89e920a2024-09-20 09:24:36 +0200[diff] [blame]64config TPL_DM_MMC
65 bool "Enable MMC controllers using Driver Model in TPL"
66 depends on TPL_DM && DM_MMC
67 select TPL_BLK
68 help
69 This enables the MultiMediaCard (MMC) uclass which supports MMC and
70 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
71 and non-removable (e.g. eMMC chip) devices are supported. These
72 appear as block devices in U-Boot and can support filesystems such
73 as EXT4 and FAT.
74
Masahiro Yamadae8b99722016-12-07 22:10:27 +0900[diff] [blame]75if MMC
76
Michael Walle02016c62020-09-23 12:42:51 +0200[diff] [blame]77config MMC_SDHCI_ADMA_HELPERS
78 bool
79
Bhargav Shaha1afe252019-07-08 04:10:48 +0000[diff] [blame]80config MMC_SPI
81 bool "Support for SPI-based MMC controller"
82 depends on DM_MMC && DM_SPI
83 help
84 This selects SPI-based MMC controllers.
85 If you have an MMC controller on a SPI bus, say Y here.
86
87 If unsure, say N.
88
89config MMC_SPI_CRC_ON
90 bool "Support CRC for SPI-based MMC controller"
91 depends on MMC_SPI
92 default y
93 help
94 This enables CRC for SPI-based MMC controllers.
95
96 If unsure, say N.
97
Patrice Chotardfcce4202017-10-23 10:57:31 +0200[diff] [blame]98config ARM_PL180_MMCI
99 bool "ARM AMBA Multimedia Card Interface and compatible support"
Linus Walleije64c9b42024-02-08 10:33:43 +0100[diff] [blame]100 depends on DM_MMC
Patrice Chotardfcce4202017-10-23 10:57:31 +0200[diff] [blame]101 help
102 This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
103 Interface (PL180, PL181 and compatible) support.
104 If you have an ARM(R) platform with a Multimedia Card slot,
Heinrich Schuchardtb8bcdeb2024-01-23 17:18:16 +0100[diff] [blame]105 say Y here.
Patrice Chotardfcce4202017-10-23 10:57:31 +0200[diff] [blame]106
Kishon Vijay Abraham I07baaa62017-09-21 16:30:10 +0200[diff] [blame]107config MMC_QUIRKS
108 bool "Enable quirks"
109 default y
110 help
111 Some cards and hosts may sometimes behave unexpectedly (quirks).
112 This option enable workarounds to handle those quirks. Some of them
Joel Johnson9cbee2c2020-01-11 09:08:15 -0700[diff] [blame]113 are enabled by default, other may require additional flags or are
Kishon Vijay Abraham I07baaa62017-09-21 16:30:10 +0200[diff] [blame]114 enabled by the host driver.
115
Tom Rini91735482022-10-28 20:27:05 -0400[diff] [blame]116config SYS_MMC_MAX_BLK_COUNT
117 int "Block count limit"
118 default 65535
119 help
120 The block count limit on MMC based devices. We default to 65535 due
121 to a 16bit register limit on some hardware.
122
Jean-Jacques Hiblot1d7769a2017-11-30 17:44:02 +0100[diff] [blame]123config MMC_HW_PARTITIONING
124 bool "Support for HW partitioning command(eMMC)"
125 default y
126 help
127 This adds a command and an API to do hardware partitioning on eMMC
128 devices.
129
Alex Kiernan60e0f612018-05-08 04:43:31 +0000[diff] [blame]130config SUPPORT_EMMC_RPMB
131 bool "Support eMMC replay protected memory block (RPMB)"
132 imply CMD_MMC_RPMB
Raymond Maoa571b982024-10-03 14:50:16 -0700[diff] [blame]133 select SHA256
Alex Kiernan60e0f612018-05-08 04:43:31 +0000[diff] [blame]134 help
135 Enable support for reading, writing and programming the
136 key for the Replay Protection Memory Block partition in eMMC.
137
Alex Kiernan00848772019-05-01 07:58:27 +0000[diff] [blame]138config SUPPORT_EMMC_BOOT
139 bool "Support some additional features of the eMMC boot partitions"
140 help
141 Enable support for eMMC boot partitions. This also enables
142 extensions within the mmc command.
143
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]144config MMC_IO_VOLTAGE
145 bool "Support IO voltage configuration"
146 help
147 IO voltage configuration allows selecting the voltage level of the IO
148 lines (not the level of main supply). This is required for UHS
149 support. For eMMC this not mandatory, but not enabling this option may
150 prevent the driver of using the faster modes.
151
152config SPL_MMC_IO_VOLTAGE
153 bool "Support IO voltage configuration in SPL"
Tom Rini0a83cc22022-06-10 23:03:09 -0400[diff] [blame]154 depends on SPL_MMC
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]155 help
156 IO voltage configuration allows selecting the voltage level of the IO
157 lines (not the level of main supply). This is required for UHS
158 support. For eMMC this not mandatory, but not enabling this option may
159 prevent the driver of using the faster modes.
160
Tom Rinidec7ea02024-05-20 13:35:03 -0600[diff] [blame]161config MMC_SUPPORTS_TUNING
162 bool
163
164config SPL_MMC_SUPPORTS_TUNING
165 bool
166
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]167config MMC_UHS_SUPPORT
168 bool "enable UHS support"
169 depends on MMC_IO_VOLTAGE
Tom Rinidec7ea02024-05-20 13:35:03 -0600[diff] [blame]170 select MMC_SUPPORTS_TUNING
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]171 help
172 The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
173 cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
174 frequency can go up to 208MHz (SDR104)
175
176config SPL_MMC_UHS_SUPPORT
177 bool "enable UHS support in SPL"
178 depends on SPL_MMC_IO_VOLTAGE
Tom Rinidec7ea02024-05-20 13:35:03 -0600[diff] [blame]179 select SPL_MMC_SUPPORTS_TUNING
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]180 help
181 The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
182 cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
183 frequency can go up to 208MHz (SDR104)
184
Peng Faneede83b2019-07-10 14:43:07 +0800[diff] [blame]185config MMC_HS400_ES_SUPPORT
186 bool "enable HS400 Enhanced Strobe support"
187 help
188 The HS400 Enhanced Strobe mode is support by some eMMC. The bus
189 frequency is up to 200MHz. This mode does not tune the IO.
190
191config SPL_MMC_HS400_ES_SUPPORT
192 bool "enable HS400 Enhanced Strobe support in SPL"
Tom Rini0a83cc22022-06-10 23:03:09 -0400[diff] [blame]193 depends on SPL_MMC
Peng Faneede83b2019-07-10 14:43:07 +0800[diff] [blame]194 help
195 The HS400 Enhanced Strobe mode is support by some eMMC. The bus
196 frequency is up to 200MHz. This mode does not tune the IO.
197
Peng Fan46801252018-08-10 14:07:54 +0800[diff] [blame]198config MMC_HS400_SUPPORT
199 bool "enable HS400 support"
200 select MMC_HS200_SUPPORT
201 help
202 The HS400 mode is support by some eMMC. The bus frequency is up to
203 200MHz. This mode requires tuning the IO.
204
205config SPL_MMC_HS400_SUPPORT
206 bool "enable HS400 support in SPL"
Tom Rini0a83cc22022-06-10 23:03:09 -0400[diff] [blame]207 depends on SPL_MMC
Faiz Abbas373954e2019-08-01 16:33:36 +0530[diff] [blame]208 select SPL_MMC_HS200_SUPPORT
Peng Fan46801252018-08-10 14:07:54 +0800[diff] [blame]209 help
210 The HS400 mode is support by some eMMC. The bus frequency is up to
211 200MHz. This mode requires tuning the IO.
212
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]213config MMC_HS200_SUPPORT
214 bool "enable HS200 support"
Tom Rinidec7ea02024-05-20 13:35:03 -0600[diff] [blame]215 select MMC_SUPPORTS_TUNING
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]216 help
217 The HS200 mode is support by some eMMC. The bus frequency is up to
218 200MHz. This mode requires tuning the IO.
219
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]220config SPL_MMC_HS200_SUPPORT
221 bool "enable HS200 support in SPL"
Tom Rini0a83cc22022-06-10 23:03:09 -0400[diff] [blame]222 depends on SPL_MMC
Tom Rinidec7ea02024-05-20 13:35:03 -0600[diff] [blame]223 select SPL_MMC_SUPPORTS_TUNING
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]224 help
225 The HS200 mode is support by some eMMC. The bus frequency is up to
226 200MHz. This mode requires tuning the IO.
227
Jean-Jacques Hiblota94fb412017-09-21 16:29:53 +0200[diff] [blame]228config MMC_VERBOSE
229 bool "Output more information about the MMC"
230 default y
231 help
232 Enable the output of more information about the card such as the
233 operating mode.
234
Jaehoon Chunge2bf5802018-01-26 19:25:31 +0900[diff] [blame]235config MMC_TRACE
236 bool "MMC debugging"
Jaehoon Chunge2bf5802018-01-26 19:25:31 +0900[diff] [blame]237 help
238 This is an option for use by developer. Enable MMC core debugging.
239
240 If you need to see the MMC core message, say Y.
241
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]242config MMC_DAVINCI
243 bool "TI DAVINCI Multimedia Card Interface support"
244 depends on ARCH_DAVINCI
245 default y
246 help
247 This selects the TI DAVINCI Multimedia card Interface.
248 If you have an DAVINCI board with a Multimedia Card slot,
249 say Y here. If unsure, say N.
250
Masahiro Yamada7942e912017-01-10 13:32:04 +0900[diff] [blame]251config MMC_DW
252 bool "Synopsys DesignWare Memory Card Interface"
Philipp Tomsichb3027472018-11-30 22:13:25 +0100[diff] [blame]253 select BOUNCE_BUFFER
Masahiro Yamada7942e912017-01-10 13:32:04 +0900[diff] [blame]254 help
255 This selects support for the Synopsys DesignWare Mobile Storage IP
256 block, this provides host support for SD and MMC interfaces, in both
257 PIO, internal DMA mode and external DMA mode.
258
Arthur Li055e18e2020-02-20 18:19:35 -0800[diff] [blame]259config MMC_DW_CORTINA
260 bool "Cortina specific extensions for Synopsys DW Memory Card Interface"
261 depends on DM_MMC
262 depends on MMC_DW
Arthur Li055e18e2020-02-20 18:19:35 -0800[diff] [blame]263 help
264 This selects support for Cortina SoC specific extensions to the
265 Synopsys DesignWare Memory Card Interface driver. Select this option
266 for platforms based on Cortina CAxxxx Soc's.
267
Masahiro Yamadaf1ad7282017-01-10 13:32:05 +0900[diff] [blame]268config MMC_DW_EXYNOS
269 bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
270 depends on ARCH_EXYNOS
271 depends on MMC_DW
272 default y
273 help
274 This selects support for Samsung Exynos SoC specific extensions to the
275 Synopsys DesignWare Memory Card Interface driver. Select this option
276 for platforms based on Exynos4 and Exynos5 SoC's.
277
278config MMC_DW_K3
279 bool "K3 specific extensions for Synopsys DW Memory Card Interface"
280 depends on MMC_DW
281 help
282 This selects support for Hisilicon K3 SoC specific extensions to the
283 Synopsys DesignWare Memory Card Interface driver. Select this option
284 for platforms based on Hisilicon K3 SoC's.
285
Masahiro Yamadadc607f82017-01-10 13:32:03 +0900[diff] [blame]286config MMC_DW_ROCKCHIP
Simon Glass4ecaa6d2015-08-30 16:55:37 -0600[diff] [blame]287 bool "Rockchip SD/MMC controller support"
288 depends on DM_MMC && OF_CONTROL
Masahiro Yamada7942e912017-01-10 13:32:04 +0900[diff] [blame]289 depends on MMC_DW
Simon Glass4ecaa6d2015-08-30 16:55:37 -0600[diff] [blame]290 help
291 This enables support for the Rockchip SD/MMM controller, which is
292 based on Designware IP. The device is compatible with at least
293 SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
294 as removeable SD and micro-SD cards.
295
Masahiro Yamadaf1ad7282017-01-10 13:32:05 +0900[diff] [blame]296config MMC_DW_SOCFPGA
297 bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
298 depends on ARCH_SOCFPGA
299 depends on MMC_DW
300 default y
301 help
302 This selects support for Altera SOCFPGA specific extensions to the
303 Synopsys DesignWare Memory Card Interface driver. Select this option
304 for platforms based on Altera SOCFPGA.
305
Eugeniy Paltsevb050c2c2019-02-25 18:35:28 +0300[diff] [blame]306config MMC_DW_SNPS
307 bool "Extensions for DW Memory Card Interface used in Synopsys ARC devboards"
308 depends on MMC_DW
309 depends on DM_MMC
310 depends on OF_CONTROL
311 depends on CLK
312 help
313 This selects support for Synopsys DesignWare Memory Card Interface driver
314 extensions used in various Synopsys ARC devboards.
315
Stefan Bosch22c12f72020-07-10 19:07:29 +0200[diff] [blame]316config NEXELL_DWMMC
317 bool "Nexell SD/MMC controller support"
318 depends on ARCH_NEXELL
319 depends on MMC_DW
320 depends on DM_MMC
321 depends on PINCTRL_NEXELL
322 default y
323
Carlo Caione20cab782017-04-12 20:30:42 +0200[diff] [blame]324config MMC_MESON_GX
325 bool "Meson GX EMMC controller support"
Tom Rini29b436e2024-06-04 19:37:42 -0600[diff] [blame]326 depends on DM_MMC && ARCH_MESON
Carlo Caione20cab782017-04-12 20:30:42 +0200[diff] [blame]327 help
328 Support for EMMC host controller on Meson GX ARM SoCs platform (S905)
329
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]330config MMC_MXC
331 bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
332 help
333 This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
334 Multimedia Card Interface. If you have an i.MX or MPC512x platform
335 with a Multimedia Card slot, say Y here.
336
337 If unsure, say N.
338
Amit Singh Tomar347494c2021-11-28 17:02:24 +0530[diff] [blame]339config MMC_OWL
340 bool "Actions OWL Multimedia Card Interface support"
341 depends on ARCH_OWL && DM_MMC && BLK
342 help
343 This selects the OWL SD/MMC host controller found on board
344 based on Actions S700/S900 SoC.
345
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]346config MMC_MXS
347 bool "Freescale MXS Multimedia Card Interface support"
Adam Forda456d562018-02-06 08:34:45 -0600[diff] [blame]348 depends on MX23 || MX28 || MX6 || MX7
Philipp Tomsichb3027472018-11-30 22:13:25 +0100[diff] [blame]349 select BOUNCE_BUFFER
Adam Forda456d562018-02-06 08:34:45 -0600[diff] [blame]350 select APBH_DMA
351 select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7
352 select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]353 help
354 This selects the Freescale SSP MMC controller found on MXS based
355 platforms like mx23/28.
356
357 If unsure, say N.
358
Felipe Balbiecf7dfd2017-02-20 14:24:13 +0300[diff] [blame]359config MMC_PCI
360 bool "Support for MMC controllers on PCI"
Bin Meng3d81f022021-02-15 20:01:44 +0800[diff] [blame]361 depends on MMC_SDHCI
Felipe Balbiecf7dfd2017-02-20 14:24:13 +0300[diff] [blame]362 help
363 This selects PCI-based MMC controllers.
364 If you have an MMC controller on a PCI bus, say Y here.
365
Suneel Garapati40e61332019-10-19 18:03:01 -0700[diff] [blame]366config MMC_OCTEONTX
Stefan Roesee06f5522021-03-12 09:48:25 +0100[diff] [blame]367 bool "Marvell Octeon Multimedia Card Interface support"
368 depends on (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2)
Suneel Garapati40e61332019-10-19 18:03:01 -0700[diff] [blame]369 depends on DM_MMC
Tom Rinidec7ea02024-05-20 13:35:03 -0600[diff] [blame]370 select MMC_SUPPORTS_TUNING if ARCH_OCTEONTX2
Suneel Garapati40e61332019-10-19 18:03:01 -0700[diff] [blame]371 help
Stefan Roesee06f5522021-03-12 09:48:25 +0100[diff] [blame]372 This selects the Octeon Multimedia card Interface.
373 If you have an OcteonTX/TX2 or MIPS Octeon board with a
374 Multimedia Card slot, say Y here.
Suneel Garapati40e61332019-10-19 18:03:01 -0700[diff] [blame]375
Felipe Balbiecf7dfd2017-02-20 14:24:13 +0300[diff] [blame]376 If unsure, say N.
377
Harm Berntsen7b9e5af2021-03-30 10:19:41 +0200[diff] [blame]378config MVEBU_MMC
379 bool "Kirkwood MMC controller support"
Tom Rini29b436e2024-06-04 19:37:42 -0600[diff] [blame]380 depends on DM_MMC && ARCH_KIRKWOOD
Harm Berntsen7b9e5af2021-03-30 10:19:41 +0200[diff] [blame]381 help
382 Support for MMC host controller on Kirkwood SoCs.
383 If you are on a Kirkwood architecture, say Y here.
384
385 If unsure, say N.
386
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]387config MMC_OMAP_HS
388 bool "TI OMAP High Speed Multimedia Card Interface support"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]389 select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
Jean-Jacques Hiblot4612bdd2017-09-21 17:03:10 +0200[diff] [blame]390 select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]391 help
392 This selects the TI OMAP High Speed Multimedia card Interface.
393 If you have an omap2plus board with a Multimedia Card slot,
394 say Y here.
395
396 If unsure, say N.
397
Jean-Jacques Hiblotcebf0592018-02-23 10:40:18 +0100[diff] [blame]398config MMC_OMAP_HS_ADMA
399 bool "ADMA support for OMAP HS MMC"
400 depends on MMC_OMAP_HS && !OMAP34XX
401 default y if !AM33XX
402 help
403 This enables support for the ADMA2 controller (SDA3.00 Part A2 DMA
404 controller). If supported by the hardware, selecting this option will
405 increase performances.
406
Adam Fordef354962017-02-06 11:31:43 -0600[diff] [blame]407config MMC_OMAP36XX_PINS
408 bool "Enable MMC1 on OMAP36xx/37xx"
409 depends on OMAP34XX && MMC_OMAP_HS
410 help
411 This enables extended-drain in the MMC/SD/SDIO1I/O and
412 GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129)
413 specific to the OMAP36xx/37xx using MMC1
414
415 If you have a controller with this interface, say Y here.
416
417 If unsure, say N.
418
Tom Riniaf816552022-12-02 16:42:16 -0500[diff] [blame]419config HSMMC2_8BIT
420 bool "Enable 8-bit interface for eMMC (interface #2)"
Tom Rini8c6b4372024-07-15 13:35:53 -0600[diff] [blame]421 depends on MMC_OMAP_HS && (OMAP54XX || DRA7XX || AM33XX || \
Tom Riniaf816552022-12-02 16:42:16 -0500[diff] [blame]422 AM43XX || ARCH_KEYSTONE)
423
Marek Vasuta8624ac2018-04-21 17:40:20 +0200[diff] [blame]424config SH_MMCIF
425 bool "SuperH/Renesas ARM SoCs on-chip MMCIF host controller support"
Marek Vasut6468c4c2024-02-27 17:05:55 +0100[diff] [blame]426 depends on ARCH_RENESAS || SH
Marek Vasuta8624ac2018-04-21 17:40:20 +0200[diff] [blame]427 help
428 Support for the on-chip MMCIF host controller on SuperH/Renesas ARM SoCs platform
429
Masahiro Yamadaa0cfcc02016-02-18 19:52:48 +0900[diff] [blame]430config MMC_UNIPHIER
Marek Vasut2883f742017-09-23 13:30:30 +0200[diff] [blame]431 bool "UniPhier SD/MMC Host Controller support"
432 depends on ARCH_UNIPHIER
Tom Rini29b436e2024-06-04 19:37:42 -0600[diff] [blame]433 depends on DM_MMC
Masahiro Yamadac2326532016-12-30 23:20:14 +0900[diff] [blame]434 depends on OF_CONTROL
Masahiro Yamadaa0cfcc02016-02-18 19:52:48 +0900[diff] [blame]435 help
Marek Vasut847ee0c2017-07-21 23:24:36 +0200[diff] [blame]436 This selects support for the Matsushita SD/MMC Host Controller on
Marek Vasut2883f742017-09-23 13:30:30 +0200[diff] [blame]437 SocioNext UniPhier SoCs.
438
439config RENESAS_SDHI
440 bool "Renesas R-Car SD/MMC Host Controller support"
Marek Vasut6468c4c2024-02-27 17:05:55 +0100[diff] [blame]441 depends on ARCH_RENESAS
Tom Rini29b436e2024-06-04 19:37:42 -0600[diff] [blame]442 depends on DM_MMC
Marek Vasut2883f742017-09-23 13:30:30 +0200[diff] [blame]443 depends on OF_CONTROL
Marek Vasut9f7baeb2020-04-04 12:45:04 +0200[diff] [blame]444 select BOUNCE_BUFFER
Marek Vasut2883f742017-09-23 13:30:30 +0200[diff] [blame]445 help
446 This selects support for the Matsushita SD/MMC Host Controller on
447 Renesas R-Car SoCs.
Masahiro Yamadaa0cfcc02016-02-18 19:52:48 +0900[diff] [blame]448
Alexander Graf044725f2018-01-23 18:05:22 +0100[diff] [blame]449config MMC_BCM2835
450 bool "BCM2835 family custom SD/MMC Host Controller support"
451 depends on ARCH_BCM283X
Tom Rini29b436e2024-06-04 19:37:42 -0600[diff] [blame]452 depends on DM_MMC
Alexander Graf044725f2018-01-23 18:05:22 +0100[diff] [blame]453 depends on OF_CONTROL
454 default y
455 help
456 This selects support for the custom SD host controller in the BCM2835
457 family of devices.
458
459 If you have a BCM2835 platform with SD or MMC devices, say Y here.
460
461 If unsure, say N.
462
Paul Burton8e142842018-12-16 19:25:20 -0300[diff] [blame]463config JZ47XX_MMC
464 bool "Ingenic JZ47xx SD/MMC Host Controller support"
465 depends on ARCH_JZ47XX
466 help
467 This selects support for the SD Card Controller on Ingenic JZ47xx SoCs.
468
Masahiro Yamada54f7cfc2017-01-30 19:46:50 +0900[diff] [blame]469config MMC_SANDBOX
Simon Glassf9eebac2016-05-01 13:52:42 -0600[diff] [blame]470 bool "Sandbox MMC support"
Masahiro Yamada54f7cfc2017-01-30 19:46:50 +0900[diff] [blame]471 depends on SANDBOX
Tom Rini29b436e2024-06-04 19:37:42 -0600[diff] [blame]472 depends on DM_MMC && OF_CONTROL
Simon Glassf9eebac2016-05-01 13:52:42 -0600[diff] [blame]473 help
474 This select a dummy sandbox MMC driver. At present this does nothing
475 other than allow sandbox to be build with MMC support. This
476 improves build coverage for sandbox and makes it easier to detect
477 MMC build errors with sandbox.
478
Masahiro Yamada7db8c172016-12-07 22:10:28 +0900[diff] [blame]479config MMC_SDHCI
480 bool "Secure Digital Host Controller Interface support"
481 help
482 This selects the generic Secure Digital Host Controller Interface.
483 It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
484 and Toshiba(R). Most controllers found in laptops are of this type.
485
486 If you have a controller with this interface, say Y here.
487
488 If unsure, say N.
489
Masahiro Yamadabfd110f2016-12-07 22:10:30 +0900[diff] [blame]490config MMC_SDHCI_IO_ACCESSORS
491 bool
492 depends on MMC_SDHCI
493 help
494 This is silent Kconfig symbol that is selected by the drivers that
495 need to overwrite SDHCI IO memory accessors.
496
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]497config MMC_SDHCI_SDMA
498 bool "Support SDHCI SDMA"
499 depends on MMC_SDHCI
500 help
501 This enables support for the SDMA (Single Operation DMA) defined
502 in the SD Host Controller Standard Specification Version 1.00 .
503
Peter Geis4561ada2023-04-18 16:46:44 +0000[diff] [blame]504config SPL_MMC_SDHCI_SDMA
505 bool "Support SDHCI SDMA in SPL"
506 depends on SPL_MMC && MMC_SDHCI
507 default y if MMC_SDHCI_SDMA
508 help
509 This enables support for the SDMA (Single Operation DMA) defined
510 in the SD Host Controller Standard Specification Version 1.00 in SPL.
511
Faiz Abbas4c082a62019-04-16 23:06:58 +0530[diff] [blame]512config MMC_SDHCI_ADMA
513 bool "Support SDHCI ADMA2"
514 depends on MMC_SDHCI
Michael Walle02016c62020-09-23 12:42:51 +0200[diff] [blame]515 select MMC_SDHCI_ADMA_HELPERS
Faiz Abbas4c082a62019-04-16 23:06:58 +0530[diff] [blame]516 help
517 This enables support for the ADMA (Advanced DMA) defined
518 in the SD Host Controller Standard Specification Version 3.00
519
520config SPL_MMC_SDHCI_ADMA
521 bool "Support SDHCI ADMA2 in SPL"
Tom Rini0a83cc22022-06-10 23:03:09 -0400[diff] [blame]522 depends on SPL_MMC && MMC_SDHCI
Michael Walle02016c62020-09-23 12:42:51 +0200[diff] [blame]523 select MMC_SDHCI_ADMA_HELPERS
Faiz Abbas4c082a62019-04-16 23:06:58 +0530[diff] [blame]524 help
525 This enables support for the ADMA (Advanced DMA) defined
526 in the SD Host Controller Standard Specification Version 3.00 in SPL.
527
Greg Malysaeb92ef12024-03-25 22:28:08 -0400[diff] [blame]528config MMC_SDHCI_ADMA_FORCE_32BIT
529 bool "Force 32 bit mode for ADMA on 64 bit platforms"
530 help
531 This forces SDHCI ADMA to be built for 32 bit descriptors, even
532 on a 64 bit platform where they would otherwise be assumed to
533 be 64 bits. This is necessary for certain hardware platforms
534 that are 64-bit but include only 32-bit support within the selected
535 SD host controller IP.
536
537config MMC_SDHCI_ADMA_64BIT
538 bool "Use SHDCI ADMA with 64 bit descriptors"
539 depends on !MMC_SDHCI_ADMA_FORCE_32BIT
540 default y if DMA_ADDR_T_64BIT
541 help
542 This selects 64 bit descriptors for SDHCI ADMA. It is enabled by
543 default on 64 bit systems, but can be disabled if one of these
544 systems includes 32-bit ADMA.
545
Chris Packham7d5d5912022-05-29 11:13:17 +1200[diff] [blame]546config FIXED_SDHCI_ALIGNED_BUFFER
547 hex "SDRAM address for fixed buffer"
548 depends on SPL && MVEBU_SPL_BOOT_DEVICE_MMC
549 default 0x00180000
550 help
551 On the Marvell Armada 38x when the SPL runs it located in internal
552 SRAM which is the L2 cache locked to memory. When the MMC buffers
553 are located on the stack (or bss), the SDIO controller (SDHCI) can't
554 write into this L2 cache memory.
555
556 This specifies the address of a fixed buffer located in SDRAM that
557 will be used for all SDHCI transfers in the SPL.
558
Eddie Jamesc8a65812019-08-27 09:48:03 -0500[diff] [blame]559config MMC_SDHCI_ASPEED
560 bool "Aspeed SDHCI controller"
561 depends on ARCH_ASPEED
562 depends on DM_MMC
563 depends on MMC_SDHCI
Joel Stanley818a6b52022-06-23 18:35:34 +0930[diff] [blame]564 select MISC
Eddie Jamesc8a65812019-08-27 09:48:03 -0500[diff] [blame]565 help
566 Enables support for the Aspeed SDHCI 2.0 controller present on Aspeed
567 SoCs. This device is compatible with SD 3.0 and/or MMC 4.3
568 specifications. On the AST2600, the device is also compatible with
569 MMC 5.1 and eMMC 3.0.
570
Masahiro Yamada8c1a1322017-01-30 19:46:55 +0900[diff] [blame]571config MMC_SDHCI_ATMEL
572 bool "Atmel SDHCI controller support"
573 depends on ARCH_AT91
Tom Rini29b436e2024-06-04 19:37:42 -0600[diff] [blame]574 depends on DM_MMC && ARCH_AT91
Masahiro Yamada8c1a1322017-01-30 19:46:55 +0900[diff] [blame]575 depends on MMC_SDHCI
576 help
577 This enables support for the Atmel SDHCI controller, which supports
578 the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
579 Memory Card Specification V3.0, and the SDIO V3.0 specification.
580 It is compliant with the SD Host Controller Standard V3.0
581 specification.
582
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]583config MMC_SDHCI_BCM2835
584 tristate "SDHCI support for the BCM2835 SD/MMC Controller"
585 depends on ARCH_BCM283X
586 depends on MMC_SDHCI
Masahiro Yamadabfd110f2016-12-07 22:10:30 +0900[diff] [blame]587 select MMC_SDHCI_IO_ACCESSORS
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]588 help
589 This selects the BCM2835 SD/MMC controller.
590
591 If you have a BCM2835 platform with SD or MMC devices,
592 say Y here.
593
594 If unsure, say N.
595
Thomas Fitzsimmons919646d2018-06-08 17:59:45 -0400[diff] [blame]596config MMC_SDHCI_BCMSTB
597 tristate "SDHCI support for the BCMSTB SD/MMC Controller"
598 depends on MMC_SDHCI
599 help
600 This selects the Broadcom set-top box SD/MMC controller.
601
602 If you have a BCMSTB platform with SD or MMC devices,
603 say Y here.
604
605 If unsure, say N.
606
Masahiro Yamadadcbc4432016-12-30 22:41:46 +0900[diff] [blame]607config MMC_SDHCI_CADENCE
608 bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
Tom Rini29b436e2024-06-04 19:37:42 -0600[diff] [blame]609 depends on DM_MMC
Masahiro Yamadadcbc4432016-12-30 22:41:46 +0900[diff] [blame]610 depends on MMC_SDHCI
611 depends on OF_CONTROL
612 help
613 This selects the Cadence SD/SDIO/eMMC driver.
614
615 If you have a controller with this interface, say Y here.
616
617 If unsure, say N.
618
Kongyang Liu331ee412024-03-10 01:51:55 +0800[diff] [blame]619config MMC_SDHCI_CV1800B
620 bool "SDHCI support for the CV1800B SD/SDIO/eMMC controller"
Tom Rini29b436e2024-06-04 19:37:42 -0600[diff] [blame]621 depends on DM_MMC
Kongyang Liu331ee412024-03-10 01:51:55 +0800[diff] [blame]622 depends on MMC_SDHCI
623 depends on OF_CONTROL
624 help
625 This selects the CV1800B SD/SDIO/eMMC driver.
626
627 If you have a controller with this interface,
628 say Y here.
629
630 If unsure, say N.
631
Faiz Abbasd8fb3092019-06-11 00:43:31 +0530[diff] [blame]632config MMC_SDHCI_AM654
633 bool "SDHCI Controller on TI's Am654 devices"
Lokesh Vutlabc9979f2018-08-27 15:57:54 +0530[diff] [blame]634 depends on ARCH_K3
635 depends on MMC_SDHCI
636 depends on DM_MMC && OF_CONTROL && BLK
Faiz Abbase9aed582019-06-11 00:43:38 +0530[diff] [blame]637 depends on REGMAP
Faiz Abbas36c8c5c2021-02-04 15:10:54 +0530[diff] [blame]638 select MMC_SDHCI_IO_ACCESSORS
Lokesh Vutlabc9979f2018-08-27 15:57:54 +0530[diff] [blame]639 help
Faiz Abbasd8fb3092019-06-11 00:43:31 +0530[diff] [blame]640 Support for Secure Digital Host Controller Interface (SDHCI)
641 controllers present on TI's AM654 SOCs.
Lokesh Vutlabc9979f2018-08-27 15:57:54 +0530[diff] [blame]642
Arun Parameswaran2f4f34a2019-09-12 11:06:08 -0700[diff] [blame]643config MMC_SDHCI_IPROC
644 bool "SDHCI support for the iProc SD/MMC Controller"
645 depends on MMC_SDHCI
646 help
647 This selects the iProc SD/MMC controller.
648
649 If you have a Broadcom IPROC platform with SD or MMC devices,
Heinrich Schuchardtb8bcdeb2024-01-23 17:18:16 +0100[diff] [blame]650 say Y here.
Arun Parameswaran2f4f34a2019-09-12 11:06:08 -0700[diff] [blame]651
652 If unsure, say N.
653
Jassi Brar8188bda2021-06-04 18:44:16 +0900[diff] [blame]654config MMC_SDHCI_F_SDH30
Kunihiko Hayashi2cd5da62022-09-09 16:23:33 +0900[diff] [blame]655 bool "SDHCI support for Fujitsu Semiconductor/Socionext F_SDH30"
Tom Rini29b436e2024-06-04 19:37:42 -0600[diff] [blame]656 depends on DM_MMC
Jassi Brar8188bda2021-06-04 18:44:16 +0900[diff] [blame]657 depends on MMC_SDHCI
658 help
659 This selects the Secure Digital Host Controller Interface (SDHCI)
Kunihiko Hayashi2cd5da62022-09-09 16:23:33 +0900[diff] [blame]660 Needed by some Fujitsu/Socionext SoC for MMC / SD / SDIO support.
Heinrich Schuchardtb8bcdeb2024-01-23 17:18:16 +0100[diff] [blame]661 If you have a controller with this interface, say Y here.
Jassi Brar8188bda2021-06-04 18:44:16 +0900[diff] [blame]662 If unsure, say N.
663
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]664config MMC_SDHCI_KONA
665 bool "SDHCI support on Broadcom KONA platform"
666 depends on MMC_SDHCI
667 help
668 This selects the Broadcom Kona Secure Digital Host Controller
669 Interface(SDHCI) support.
670 This is used in Broadcom mobile SoCs.
671
672 If you have a controller with this interface, say Y here.
673
Masahiro Yamadaa1262eb2017-01-30 19:46:53 +0900[diff] [blame]674config MMC_SDHCI_MSM
675 bool "Qualcomm SDHCI controller"
Tom Rini29b436e2024-06-04 19:37:42 -0600[diff] [blame]676 depends on DM_MMC
Masahiro Yamadaa1262eb2017-01-30 19:46:53 +0900[diff] [blame]677 depends on MMC_SDHCI
678 help
679 Enables support for SDHCI 2.0 controller present on some Qualcomm
680 Snapdragon devices. This device is compatible with eMMC v4.5 and
681 SD 3.0 specifications. Both SD and eMMC devices are supported.
682 Card-detect gpios are not supported.
683
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]684config MMC_SDHCI_MV
685 bool "SDHCI support on Marvell platform"
686 depends on ARCH_MVEBU
687 depends on MMC_SDHCI
Stefan Roesefb0720b2023-02-10 13:23:52 +0100[diff] [blame]688 depends on DM_MMC
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]689 help
690 This selects the Secure Digital Host Controller Interface on
691 Marvell platform.
692
693 If you have a controller with this interface, say Y here.
694
695 If unsure, say N.
696
Jim Liu29cf22c2022-05-24 16:55:33 +0800[diff] [blame]697config MMC_SDHCI_NPCM
698 bool "SDHCI support on Nuvoton NPCM device"
699 depends on MMC_SDHCI
700 depends on DM_MMC
701 help
702 This selects the Secure Digital Host Controller Interface (SDHCI)
703 on Nuvoton NPCM device.
704
705 If you have a controller with this interface, say Y here.
706
707 If unsure, say N.
708
Masahiro Yamadaf79df032017-01-30 19:46:54 +0900[diff] [blame]709config MMC_SDHCI_PIC32
710 bool "Microchip PIC32 on-chip SDHCI support"
711 depends on DM_MMC && MACH_PIC32
712 depends on MMC_SDHCI
713 help
714 Support for Microchip PIC32 SDHCI controller.
715
Masahiro Yamadababe0262017-01-30 19:46:52 +0900[diff] [blame]716config MMC_SDHCI_ROCKCHIP
717 bool "Arasan SDHCI controller for Rockchip support"
718 depends on ARCH_ROCKCHIP
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]719 depends on DM_MMC && BLK
Masahiro Yamadababe0262017-01-30 19:46:52 +0900[diff] [blame]720 depends on MMC_SDHCI
721 help
722 Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
723
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]724config MMC_SDHCI_S5P
725 bool "SDHCI support on Samsung S5P SoC"
726 depends on MMC_SDHCI
727 help
728 This selects the Secure Digital Host Controller Interface (SDHCI)
729 on Samsung S5P SoCs.
730
731 If you have a controller with this interface, say Y here.
732
733 If unsure, say N.
734
Maksim Kiselev6d6a8902024-12-11 23:10:59 +0300[diff] [blame]735config MMC_SDHCI_SNPS
736 bool "Synopsys DesignWare SDHCI controller"
737 depends on MMC_SDHCI
738 depends on DM_MMC
739 help
740 Support for DesignWare SDHCI host controller on Alibaba TH1520 SoC.
741 This is a highly configurable and programmable, high performance
742 Mobile Storage Host Controller (MSHC) with AXI as the bus interface
743 for data transfer.
744
745 If unsure, say N.
746
Patrice Chotard2eea7d82017-02-21 13:37:09 +0100[diff] [blame]747config MMC_SDHCI_STI
748 bool "SDHCI support for STMicroelectronics SoC"
Patrice Chotardcdf6b572017-02-21 13:37:11 +0100[diff] [blame]749 depends on MMC_SDHCI && OF_CONTROL
Patrice Chotard2eea7d82017-02-21 13:37:09 +0100[diff] [blame]750 help
751 This selects the Secure Digital Host Controller Interface (SDHCI)
752 on STMicroelectronics STiH410 SoC.
753
Stefan Roese121fc562016-12-09 15:03:28 +0100[diff] [blame]754config MMC_SDHCI_XENON
755 bool "SDHCI support for the Xenon SDHCI controller"
756 depends on MMC_SDHCI && DM_MMC && OF_CONTROL
757 help
758 Support for Xenon SDHCI host controller on Marvell Armada 3700
759 7k/8k ARM SoCs platforms
760
761 If you have a controller with this interface, say Y here.
762
763 If unsure, say N.
764
Felipe Balbib7567602017-02-20 14:24:14 +0300[diff] [blame]765config MMC_SDHCI_TANGIER
766 bool "Tangier SDHCI controller support"
767 depends on DM_MMC && BLK
768 depends on MMC_SDHCI
769 help
770 This selects support for SDHCI controller on Tanginer
771 SoC. Note that this controller does not sit on PCI bus and,
772 hence, cannot be enumerated by standard PCI means.
773
774 If you're using an Intel Tangier SoC (available on Intel
775 Edison board), say Y here.
776
777 If unsure, say N.
778
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]779config MMC_SDHCI_TEGRA
780 bool "SDHCI platform support for the Tegra SD/MMC Controller"
Trevor Woerner513f6402020-05-06 08:02:41 -0400[diff] [blame]781 depends on ARCH_TEGRA
Philipp Tomsichb3027472018-11-30 22:13:25 +0100[diff] [blame]782 select BOUNCE_BUFFER
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]783 default y
784 help
785 This selects the Tegra SD/MMC controller. If you have a Tegra
786 platform with SD or MMC devices, say Y here.
787
788 If unsure, say N.
789
Trent Piepho1bf56c32019-04-01 23:05:49 +0000[diff] [blame]790config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
791 bool "Disable external clock loopback"
792 depends on MMC_SDHCI_TEGRA && TEGRA124
793 help
794 Disable the external clock loopback and use the internal one on SDMMC3
795 as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits
796 being set to 0xfffd according to the TRM.
797
798 TODO(marcel.ziswiler@toradex.com): Move to device tree controlled
799 approach once proper kernel integration made it mainline.
800
Masahiro Yamada168c57d2017-01-30 19:46:51 +0900[diff] [blame]801config MMC_SDHCI_ZYNQ
802 bool "Arasan SDHCI controller support"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]803 depends on DM_MMC && OF_CONTROL && BLK
Masahiro Yamada168c57d2017-01-30 19:46:51 +0900[diff] [blame]804 depends on MMC_SDHCI
805 help
806 Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
807
Vipul Kumar62548002018-02-28 15:53:28 +0530[diff] [blame]808config ZYNQ_SDHCI_MAX_FREQ
809 int "Set the maximum frequency of the controller"
810 depends on MMC_SDHCI_ZYNQ
811 help
812 Set the maximum frequency of the controller.
813
Vipul Kumardcc14e32018-02-28 15:53:29 +0530[diff] [blame]814config ZYNQ_SDHCI_MIN_FREQ
815 int "Set the minimum frequency of the controller"
816 depends on MMC_SDHCI_ZYNQ
817 default 0
818 help
819 Set the minimum frequency of the controller.
820
Siva Durga Prasad Paladugua9a3d002019-05-27 14:33:14 +0530[diff] [blame]821config ZYNQ_HISPD_BROKEN
822 bool "High speed broken for Zynq SDHCI controller"
823 depends on MMC_SDHCI_ZYNQ
824 help
825 Set if high speed mode is broken.
826
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]827config MMC_SUNXI
828 bool "Allwinner sunxi SD/MMC Host Controller support"
Samuel Holland6b0d0bc2022-04-10 00:13:34 -0500[diff] [blame]829 depends on ARCH_SUNXI
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]830 default y
831 help
832 This selects support for the SD/MMC Host Controller on
833 Allwinner sunxi SoCs.
834
Maxime Ripard95e34702017-08-23 12:03:41 +0200[diff] [blame]835config MMC_SUNXI_HAS_NEW_MODE
836 bool
837 depends on MMC_SUNXI
838
Vasily Khoruzhickb198e2c2018-11-09 20:41:44 -0800[diff] [blame]839config MMC_SUNXI_HAS_MODE_SWITCH
840 bool
841 depends on MMC_SUNXI
842
Tianrui Wei8cfc7c52021-07-01 12:54:20 +0800[diff] [blame]843config MMC_PITON
844 bool "MMC support for OpenPiton SoC"
845 depends on DM_MMC && BLK
846 help
847 This selects support for the SD host controller on OpenPiton SoC.
848 Note that this SD controller directly exposes the contents of the
849 SD card as memory mapped, so there is no manual configuration
850 required
851
Wenyou Yang7a7a64c2017-04-13 10:29:22 +0800[diff] [blame]852config GENERIC_ATMEL_MCI
853 bool "Atmel Multimedia Card Interface support"
Tom Rini29b436e2024-06-04 19:37:42 -0600[diff] [blame]854 depends on DM_MMC && ARCH_AT91
Wenyou Yang7a7a64c2017-04-13 10:29:22 +0800[diff] [blame]855 help
856 This enables support for Atmel High Speed Multimedia Card Interface
857 (HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3,
858 the SD Memory Card Specification V2.0, the SDIO V2.0 specification
859 and CE-ATA V1.1.
860
Patrice Chotardae19b812017-09-04 17:56:22 +0200[diff] [blame]861config STM32_SDMMC2
862 bool "STMicroelectronics STM32H7 SD/MMC Host Controller support"
Tom Rini29b436e2024-06-04 19:37:42 -0600[diff] [blame]863 depends on DM_MMC && OF_CONTROL
Patrice Chotardae19b812017-09-04 17:56:22 +0200[diff] [blame]864 help
865 This selects support for the SD/MMC controller on STM32H7 SoCs.
866 If you have a board based on such a SoC and with a SD/MMC slot,
Heinrich Schuchardtb8bcdeb2024-01-23 17:18:16 +0100[diff] [blame]867 say Y here.
Patrice Chotardae19b812017-09-04 17:56:22 +0200[diff] [blame]868
Rick Chencbb52972017-11-14 14:47:09 +0800[diff] [blame]869config FTSDC010
870 bool "Ftsdc010 SD/MMC controller Support"
871 help
872 This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP.
873
Rick Chenc59a6fb2018-03-20 15:10:49 +0800[diff] [blame]874config FTSDC010_SDIO
875 bool "Support ftsdc010 sdio"
Rick Chenc59a6fb2018-03-20 15:10:49 +0800[diff] [blame]876 depends on FTSDC010
877 help
878 This can enable ftsdc010 sdio function.
879
developerdc5a9aa2018-11-15 10:08:04 +0800[diff] [blame]880config MMC_MTK
881 bool "MediaTek SD/MMC Card Interface support"
developer607faf72019-09-25 17:45:37 +0800[diff] [blame]882 depends on ARCH_MEDIATEK || ARCH_MTMIPS
Tom Rini29b436e2024-06-04 19:37:42 -0600[diff] [blame]883 depends on DM_MMC
developerdc5a9aa2018-11-15 10:08:04 +0800[diff] [blame]884 depends on OF_CONTROL
885 help
886 This selects the MediaTek(R) Secure digital and Multimedia card Interface.
Heinrich Schuchardtb8bcdeb2024-01-23 17:18:16 +0100[diff] [blame]887 If you have a machine with a integrated SD/MMC card reader, say Y here.
developerdc5a9aa2018-11-15 10:08:04 +0800[diff] [blame]888 This is needed if support for any SD/SDIO/MMC devices is required.
889 If unsure, say N.
890
Masahiro Yamadae8b99722016-12-07 22:10:27 +0900[diff] [blame]891endif
892
Tom Rini6fb86c12022-12-02 16:42:21 -0500[diff] [blame]893config FSL_SDHC_V2_3
894 bool
895
Mario Six41d7d972018-03-28 14:38:19 +0200[diff] [blame]896config FSL_ESDHC
897 bool "Freescale/NXP eSDHC controller support"
Tom Rini6fb86c12022-12-02 16:42:21 -0500[diff] [blame]898 select FSL_SDHC_V2_3 if ARCH_P1010 || ARCH_BSC9131 || ARCH_BSC9132 \
899 || ARCH_C29X
Mario Six41d7d972018-03-28 14:38:19 +0200[diff] [blame]900 help
Yangbo Lu982f4252019-06-21 11:42:27 +0800[diff] [blame]901 This selects support for the eSDHC (Enhanced Secure Digital Host
902 Controller) found on numerous Freescale/NXP SoCs.
903
Michael Walle081d4012020-10-12 10:07:14 +0200[diff] [blame]904config FSL_ESDHC_SUPPORT_ADMA2
905 bool "enable ADMA2 support"
906 depends on FSL_ESDHC
907 select MMC_SDHCI_ADMA_HELPERS
908 help
909 This enables support for the ADMA2 transfer mode. If supported by the
910 eSDHC it will allow 64bit DMA addresses.
911
Yangbo Luce884022020-05-19 11:06:44 +0800[diff] [blame]912config FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND
913 bool "enable eSDHC workaround for 3.3v IO reliability issue"
914 depends on FSL_ESDHC && DM_MMC
Yangbo Luce884022020-05-19 11:06:44 +0800[diff] [blame]915 help
916 When eSDHC operates at 3.3v, damage can accumulate in an internal
917 level shifter at a higher than expected rate. The faster the interface
918 runs, the more damage accumulates. This issue now is found on LX2160A
919 eSDHC1 for only SD card. The hardware workaround is recommended to use
920 an on-board level shifter that is 1.8v on SoC side and 3.3v on SD card
921 side. For boards without hardware workaround, this option could be
922 enabled, ensuring 1.8v IO voltage and disabling eSDHC if no card.
923 This option assumes no hotplug, and u-boot has to make all the way to
924 to linux to use 1.8v UHS-I speed mode if has card.
925
Yangbo Lue087cd62021-06-03 10:51:17 +0800[diff] [blame]926config FSL_ESDHC_VS33_NOT_SUPPORT
927 bool "3.3V power supply not supported"
928 depends on FSL_ESDHC
929 help
930 For eSDHC, power supply is through peripheral circuit. 3.3V support is
931 common. Select this if 3.3V power supply not supported.
932
Pali Rohár3a672d62022-05-11 20:27:13 +0200[diff] [blame]933config SYS_FSL_ESDHC_DEFAULT_BUS_WIDTH
934 int
935 depends on FSL_ESDHC
936 default 1
937
Tom Rinibdd47f32022-06-16 14:04:38 -0400[diff] [blame]938config ESDHC_DETECT_QUIRK
939 bool "QIXIS-based eSDHC quirk detection"
940 depends on FSL_ESDHC && FSL_QIXIS
941
Yangbo Lu982f4252019-06-21 11:42:27 +0800[diff] [blame]942config FSL_ESDHC_IMX
943 bool "Freescale/NXP i.MX eSDHC controller support"
944 help
945 This selects support for the i.MX eSDHC (Enhanced Secure Digital Host
946 Controller) found on numerous Freescale/NXP SoCs.
Mario Six41d7d972018-03-28 14:38:19 +0200[diff] [blame]947
Tom Rinidad332b2022-07-31 21:08:25 -0400[diff] [blame]948config SYS_FSL_ESDHC_HAS_DDR_MODE
949 bool "i.MX eSDHC controller supports DDR mode"
950 depends on FSL_ESDHC_IMX
951
Adam Ford01836582019-08-14 07:23:43 -0500[diff] [blame]952config FSL_USDHC
953 bool "Freescale/NXP i.MX uSDHC controller support"
Peng Fan29b31a52022-07-26 16:40:44 +0800[diff] [blame]954 depends on MX6 || MX7 ||ARCH_MX7ULP || IMX8 || IMX8M || IMX8ULP || IMX9 || IMXRT
Adam Ford01836582019-08-14 07:23:43 -0500[diff] [blame]955 select FSL_ESDHC_IMX
956 help
957 This enables the Ultra Secured Digital Host Controller enhancements
958
Tom Rinif8967f82022-12-02 16:42:22 -0500[diff] [blame]959config FSL_ESDHC_PIN_MUX
960 bool "Perform esdhc device-tree fixup"
961 depends on (FSL_ESDHC || FSL_ESDHC_IMX) && OF_LIBFDT
962
Nobuhiro Iwamatsu3ec5f862014-12-17 08:03:00 +0900[diff] [blame]963endmenu
York Sun097e3602016-12-28 08:43:42 -0800[diff] [blame]964
965config SYS_FSL_ERRATUM_ESDHC111
966 bool
967
968config SYS_FSL_ERRATUM_ESDHC13
969 bool
970
971config SYS_FSL_ERRATUM_ESDHC135
972 bool
973
974config SYS_FSL_ERRATUM_ESDHC_A001
975 bool
Michael Walle148dc612021-03-17 15:01:36 +0100[diff] [blame]976
977config SYS_FSL_ERRATUM_A011334
978 bool
Michael Walle7259dc52021-03-17 15:01:37 +0100[diff] [blame]979
980config SYS_FSL_ESDHC_UNRELIABLE_PULSE_DETECTION_WORKAROUND
981 bool