Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 148dc613817a232ef28fb9464fef54b26e47f923 / . / drivers / mmc / Kconfig
blob: b0ff92b5fa11b817a76a116f2eba65e7602eccae [file] [log] [blame]
Nobuhiro Iwamatsu3ec5f862014-12-17 08:03:00 +0900[diff] [blame]1menu "MMC Host controller Support"
2
Maxime Ripard4f780742015-10-15 22:04:05 +0200[diff] [blame]3config MMC
Masahiro Yamadaa5ed4be2016-12-07 22:10:26 +0900[diff] [blame]4 bool "MMC/SD/SDIO card support"
5 default ARM || PPC || SANDBOX
Adam Fordb10ba902018-02-06 12:43:56 -0600[diff] [blame]6 select HAVE_BLOCK_DEVICE
Maxime Ripard4f780742015-10-15 22:04:05 +0200[diff] [blame]7 help
Masahiro Yamadaa5ed4be2016-12-07 22:10:26 +0900[diff] [blame]8 This selects MultiMediaCard, Secure Digital and Secure
9 Digital I/O support.
10
11 If you want MMC/SD/SDIO support, you should say Y here and
12 also to your specific host controller driver.
Maxime Ripard4f780742015-10-15 22:04:05 +0200[diff] [blame]13
Jean-Jacques Hiblotd0531672018-01-04 15:23:32 +0100[diff] [blame]14config MMC_WRITE
15 bool "support for MMC/SD write operations"
16 depends on MMC
17 default y
18 help
19 Enable write access to MMC and SD Cards
20
Jaehoon Chung48ad8272021-02-16 10:16:52 +0900[diff] [blame]21config MMC_PWRSEQ
22 bool "HW reset support for eMMC"
23 depends on PWRSEQ
24 help
25 Ths select Hardware reset support aka pwrseq-emmc for eMMC
26 devices.
27
Jun Nieb4f4f6e2018-01-02 12:25:57 +0800[diff] [blame]28config MMC_BROKEN_CD
29 bool "Poll for broken card detection case"
30 help
31 If card detection feature is broken, just poll to detect.
32
Simon Glass1e8eb1b2015-06-23 15:38:48 -0600[diff] [blame]33config DM_MMC
34 bool "Enable MMC controllers using Driver Model"
35 depends on DM
36 help
Robert P. J. Day8d56db92016-07-15 13:44:45 -0400[diff] [blame]37 This enables the MultiMediaCard (MMC) uclass which supports MMC and
Simon Glass1e8eb1b2015-06-23 15:38:48 -0600[diff] [blame]38 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
39 and non-removable (e.g. eMMC chip) devices are supported. These
40 appear as block devices in U-Boot and can support filesystems such
41 as EXT4 and FAT.
42
Simon Glass5f4bd8c2017-07-04 13:31:19 -0600[diff] [blame]43config SPL_DM_MMC
44 bool "Enable MMC controllers using Driver Model in SPL"
45 depends on SPL_DM && DM_MMC
46 default y
47 help
48 This enables the MultiMediaCard (MMC) uclass which supports MMC and
49 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
50 and non-removable (e.g. eMMC chip) devices are supported. These
51 appear as block devices in U-Boot and can support filesystems such
52 as EXT4 and FAT.
53
Masahiro Yamadae8b99722016-12-07 22:10:27 +0900[diff] [blame]54if MMC
55
Michael Walle02016c62020-09-23 12:42:51 +0200[diff] [blame]56config MMC_SDHCI_ADMA_HELPERS
57 bool
58
Bhargav Shaha1afe252019-07-08 04:10:48 +0000[diff] [blame]59config MMC_SPI
60 bool "Support for SPI-based MMC controller"
61 depends on DM_MMC && DM_SPI
62 help
63 This selects SPI-based MMC controllers.
64 If you have an MMC controller on a SPI bus, say Y here.
65
66 If unsure, say N.
67
68config MMC_SPI_CRC_ON
69 bool "Support CRC for SPI-based MMC controller"
70 depends on MMC_SPI
71 default y
72 help
73 This enables CRC for SPI-based MMC controllers.
74
75 If unsure, say N.
76
Patrice Chotardfcce4202017-10-23 10:57:31 +0200[diff] [blame]77config ARM_PL180_MMCI
78 bool "ARM AMBA Multimedia Card Interface and compatible support"
Patrice Chotardfcce4202017-10-23 10:57:31 +0200[diff] [blame]79 help
80 This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
81 Interface (PL180, PL181 and compatible) support.
82 If you have an ARM(R) platform with a Multimedia Card slot,
83 say Y or M here.
84
Kishon Vijay Abraham I07baaa62017-09-21 16:30:10 +0200[diff] [blame]85config MMC_QUIRKS
86 bool "Enable quirks"
87 default y
88 help
89 Some cards and hosts may sometimes behave unexpectedly (quirks).
90 This option enable workarounds to handle those quirks. Some of them
Joel Johnson9cbee2c2020-01-11 09:08:15 -0700[diff] [blame]91 are enabled by default, other may require additional flags or are
Kishon Vijay Abraham I07baaa62017-09-21 16:30:10 +0200[diff] [blame]92 enabled by the host driver.
93
Jean-Jacques Hiblot1d7769a2017-11-30 17:44:02 +0100[diff] [blame]94config MMC_HW_PARTITIONING
95 bool "Support for HW partitioning command(eMMC)"
96 default y
97 help
98 This adds a command and an API to do hardware partitioning on eMMC
99 devices.
100
Alex Kiernan60e0f612018-05-08 04:43:31 +0000[diff] [blame]101config SUPPORT_EMMC_RPMB
102 bool "Support eMMC replay protected memory block (RPMB)"
103 imply CMD_MMC_RPMB
104 help
105 Enable support for reading, writing and programming the
106 key for the Replay Protection Memory Block partition in eMMC.
107
Alex Kiernan00848772019-05-01 07:58:27 +0000[diff] [blame]108config SUPPORT_EMMC_BOOT
109 bool "Support some additional features of the eMMC boot partitions"
110 help
111 Enable support for eMMC boot partitions. This also enables
112 extensions within the mmc command.
113
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]114config MMC_IO_VOLTAGE
115 bool "Support IO voltage configuration"
116 help
117 IO voltage configuration allows selecting the voltage level of the IO
118 lines (not the level of main supply). This is required for UHS
119 support. For eMMC this not mandatory, but not enabling this option may
120 prevent the driver of using the faster modes.
121
122config SPL_MMC_IO_VOLTAGE
123 bool "Support IO voltage configuration in SPL"
124 default n
125 help
126 IO voltage configuration allows selecting the voltage level of the IO
127 lines (not the level of main supply). This is required for UHS
128 support. For eMMC this not mandatory, but not enabling this option may
129 prevent the driver of using the faster modes.
130
131config MMC_UHS_SUPPORT
132 bool "enable UHS support"
133 depends on MMC_IO_VOLTAGE
134 help
135 The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
136 cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
137 frequency can go up to 208MHz (SDR104)
138
139config SPL_MMC_UHS_SUPPORT
140 bool "enable UHS support in SPL"
141 depends on SPL_MMC_IO_VOLTAGE
142 help
143 The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
144 cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
145 frequency can go up to 208MHz (SDR104)
146
Peng Faneede83b2019-07-10 14:43:07 +0800[diff] [blame]147config MMC_HS400_ES_SUPPORT
148 bool "enable HS400 Enhanced Strobe support"
149 help
150 The HS400 Enhanced Strobe mode is support by some eMMC. The bus
151 frequency is up to 200MHz. This mode does not tune the IO.
152
153config SPL_MMC_HS400_ES_SUPPORT
154 bool "enable HS400 Enhanced Strobe support in SPL"
155 help
156 The HS400 Enhanced Strobe mode is support by some eMMC. The bus
157 frequency is up to 200MHz. This mode does not tune the IO.
158
Peng Fan46801252018-08-10 14:07:54 +0800[diff] [blame]159config MMC_HS400_SUPPORT
160 bool "enable HS400 support"
161 select MMC_HS200_SUPPORT
162 help
163 The HS400 mode is support by some eMMC. The bus frequency is up to
164 200MHz. This mode requires tuning the IO.
165
166config SPL_MMC_HS400_SUPPORT
167 bool "enable HS400 support in SPL"
Faiz Abbas373954e2019-08-01 16:33:36 +0530[diff] [blame]168 select SPL_MMC_HS200_SUPPORT
Peng Fan46801252018-08-10 14:07:54 +0800[diff] [blame]169 help
170 The HS400 mode is support by some eMMC. The bus frequency is up to
171 200MHz. This mode requires tuning the IO.
172
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]173config MMC_HS200_SUPPORT
174 bool "enable HS200 support"
175 help
176 The HS200 mode is support by some eMMC. The bus frequency is up to
177 200MHz. This mode requires tuning the IO.
178
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]179config SPL_MMC_HS200_SUPPORT
180 bool "enable HS200 support in SPL"
181 help
182 The HS200 mode is support by some eMMC. The bus frequency is up to
183 200MHz. This mode requires tuning the IO.
184
Jean-Jacques Hiblota94fb412017-09-21 16:29:53 +0200[diff] [blame]185config MMC_VERBOSE
186 bool "Output more information about the MMC"
187 default y
188 help
189 Enable the output of more information about the card such as the
190 operating mode.
191
Jaehoon Chunge2bf5802018-01-26 19:25:31 +0900[diff] [blame]192config MMC_TRACE
193 bool "MMC debugging"
194 default n
195 help
196 This is an option for use by developer. Enable MMC core debugging.
197
198 If you need to see the MMC core message, say Y.
199
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]200config MMC_DAVINCI
201 bool "TI DAVINCI Multimedia Card Interface support"
202 depends on ARCH_DAVINCI
203 default y
204 help
205 This selects the TI DAVINCI Multimedia card Interface.
206 If you have an DAVINCI board with a Multimedia Card slot,
207 say Y here. If unsure, say N.
208
Masahiro Yamada7942e912017-01-10 13:32:04 +0900[diff] [blame]209config MMC_DW
210 bool "Synopsys DesignWare Memory Card Interface"
Philipp Tomsichb3027472018-11-30 22:13:25 +0100[diff] [blame]211 select BOUNCE_BUFFER
Masahiro Yamada7942e912017-01-10 13:32:04 +0900[diff] [blame]212 help
213 This selects support for the Synopsys DesignWare Mobile Storage IP
214 block, this provides host support for SD and MMC interfaces, in both
215 PIO, internal DMA mode and external DMA mode.
216
Arthur Li055e18e2020-02-20 18:19:35 -0800[diff] [blame]217config MMC_DW_CORTINA
218 bool "Cortina specific extensions for Synopsys DW Memory Card Interface"
219 depends on DM_MMC
220 depends on MMC_DW
221 depends on BLK
222 default n
223 help
224 This selects support for Cortina SoC specific extensions to the
225 Synopsys DesignWare Memory Card Interface driver. Select this option
226 for platforms based on Cortina CAxxxx Soc's.
227
Masahiro Yamadaf1ad7282017-01-10 13:32:05 +0900[diff] [blame]228config MMC_DW_EXYNOS
229 bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
230 depends on ARCH_EXYNOS
231 depends on MMC_DW
232 default y
233 help
234 This selects support for Samsung Exynos SoC specific extensions to the
235 Synopsys DesignWare Memory Card Interface driver. Select this option
236 for platforms based on Exynos4 and Exynos5 SoC's.
237
238config MMC_DW_K3
239 bool "K3 specific extensions for Synopsys DW Memory Card Interface"
240 depends on MMC_DW
241 help
242 This selects support for Hisilicon K3 SoC specific extensions to the
243 Synopsys DesignWare Memory Card Interface driver. Select this option
244 for platforms based on Hisilicon K3 SoC's.
245
Masahiro Yamadadc607f82017-01-10 13:32:03 +0900[diff] [blame]246config MMC_DW_ROCKCHIP
Simon Glass4ecaa6d2015-08-30 16:55:37 -0600[diff] [blame]247 bool "Rockchip SD/MMC controller support"
248 depends on DM_MMC && OF_CONTROL
Masahiro Yamada7942e912017-01-10 13:32:04 +0900[diff] [blame]249 depends on MMC_DW
Simon Glass4ecaa6d2015-08-30 16:55:37 -0600[diff] [blame]250 help
251 This enables support for the Rockchip SD/MMM controller, which is
252 based on Designware IP. The device is compatible with at least
253 SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
254 as removeable SD and micro-SD cards.
255
Masahiro Yamadaf1ad7282017-01-10 13:32:05 +0900[diff] [blame]256config MMC_DW_SOCFPGA
257 bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
258 depends on ARCH_SOCFPGA
259 depends on MMC_DW
260 default y
261 help
262 This selects support for Altera SOCFPGA specific extensions to the
263 Synopsys DesignWare Memory Card Interface driver. Select this option
264 for platforms based on Altera SOCFPGA.
265
Eugeniy Paltsevb050c2c2019-02-25 18:35:28 +0300[diff] [blame]266config MMC_DW_SNPS
267 bool "Extensions for DW Memory Card Interface used in Synopsys ARC devboards"
268 depends on MMC_DW
269 depends on DM_MMC
270 depends on OF_CONTROL
271 depends on CLK
272 help
273 This selects support for Synopsys DesignWare Memory Card Interface driver
274 extensions used in various Synopsys ARC devboards.
275
Stefan Bosch22c12f72020-07-10 19:07:29 +0200[diff] [blame]276config NEXELL_DWMMC
277 bool "Nexell SD/MMC controller support"
278 depends on ARCH_NEXELL
279 depends on MMC_DW
280 depends on DM_MMC
281 depends on PINCTRL_NEXELL
282 default y
283
Carlo Caione20cab782017-04-12 20:30:42 +0200[diff] [blame]284config MMC_MESON_GX
285 bool "Meson GX EMMC controller support"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]286 depends on DM_MMC && BLK && ARCH_MESON
Carlo Caione20cab782017-04-12 20:30:42 +0200[diff] [blame]287 help
288 Support for EMMC host controller on Meson GX ARM SoCs platform (S905)
289
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]290config MMC_MXC
291 bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
292 help
293 This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
294 Multimedia Card Interface. If you have an i.MX or MPC512x platform
295 with a Multimedia Card slot, say Y here.
296
297 If unsure, say N.
298
299config MMC_MXS
300 bool "Freescale MXS Multimedia Card Interface support"
Adam Forda456d562018-02-06 08:34:45 -0600[diff] [blame]301 depends on MX23 || MX28 || MX6 || MX7
Philipp Tomsichb3027472018-11-30 22:13:25 +0100[diff] [blame]302 select BOUNCE_BUFFER
Adam Forda456d562018-02-06 08:34:45 -0600[diff] [blame]303 select APBH_DMA
304 select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7
305 select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]306 help
307 This selects the Freescale SSP MMC controller found on MXS based
308 platforms like mx23/28.
309
310 If unsure, say N.
311
Felipe Balbiecf7dfd2017-02-20 14:24:13 +0300[diff] [blame]312config MMC_PCI
313 bool "Support for MMC controllers on PCI"
Bin Meng3d81f022021-02-15 20:01:44 +0800[diff] [blame]314 depends on MMC_SDHCI
Felipe Balbiecf7dfd2017-02-20 14:24:13 +0300[diff] [blame]315 help
316 This selects PCI-based MMC controllers.
317 If you have an MMC controller on a PCI bus, say Y here.
318
Suneel Garapati40e61332019-10-19 18:03:01 -0700[diff] [blame]319config MMC_OCTEONTX
320 bool "Marvell OcteonTX Multimedia Card Interface support"
321 depends on (ARCH_OCTEONTX || ARCH_OCTEONTX2)
322 depends on DM_MMC
323 help
324 This selects the OcteonTX Multimedia card Interface.
325 If you have an OcteonTX/TX2 board with a Multimedia Card slot,
326 say Y here.
327
Felipe Balbiecf7dfd2017-02-20 14:24:13 +0300[diff] [blame]328 If unsure, say N.
329
Marcel Ziswiler82c645c2019-05-20 02:44:58 +0200[diff] [blame]330config PXA_MMC_GENERIC
331 bool "Support for MMC controllers on PXA"
332 help
333 This selects MMC controllers on PXA.
334 If you are on a PXA architecture, say Y here.
335
336 If unsure, say N.
337
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]338config MMC_OMAP_HS
339 bool "TI OMAP High Speed Multimedia Card Interface support"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]340 select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
Jean-Jacques Hiblot4612bdd2017-09-21 17:03:10 +0200[diff] [blame]341 select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]342 help
343 This selects the TI OMAP High Speed Multimedia card Interface.
344 If you have an omap2plus board with a Multimedia Card slot,
345 say Y here.
346
347 If unsure, say N.
348
Jean-Jacques Hiblotcebf0592018-02-23 10:40:18 +0100[diff] [blame]349config MMC_OMAP_HS_ADMA
350 bool "ADMA support for OMAP HS MMC"
351 depends on MMC_OMAP_HS && !OMAP34XX
352 default y if !AM33XX
353 help
354 This enables support for the ADMA2 controller (SDA3.00 Part A2 DMA
355 controller). If supported by the hardware, selecting this option will
356 increase performances.
357
Adam Fordef354962017-02-06 11:31:43 -0600[diff] [blame]358config MMC_OMAP36XX_PINS
359 bool "Enable MMC1 on OMAP36xx/37xx"
360 depends on OMAP34XX && MMC_OMAP_HS
361 help
362 This enables extended-drain in the MMC/SD/SDIO1I/O and
363 GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129)
364 specific to the OMAP36xx/37xx using MMC1
365
366 If you have a controller with this interface, say Y here.
367
368 If unsure, say N.
369
Nobuhiro Iwamatsu3ec5f862014-12-17 08:03:00 +0900[diff] [blame]370config SH_SDHI
371 bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
Marek Vasut1c5a5a92017-05-13 15:51:14 +0200[diff] [blame]372 depends on ARCH_RMOBILE
Nobuhiro Iwamatsu3ec5f862014-12-17 08:03:00 +0900[diff] [blame]373 help
374 Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
375
Marek Vasuta8624ac2018-04-21 17:40:20 +0200[diff] [blame]376config SH_MMCIF
377 bool "SuperH/Renesas ARM SoCs on-chip MMCIF host controller support"
378 depends on ARCH_RMOBILE || SH
379 help
380 Support for the on-chip MMCIF host controller on SuperH/Renesas ARM SoCs platform
381
Masahiro Yamadaa0cfcc02016-02-18 19:52:48 +0900[diff] [blame]382config MMC_UNIPHIER
Marek Vasut2883f742017-09-23 13:30:30 +0200[diff] [blame]383 bool "UniPhier SD/MMC Host Controller support"
384 depends on ARCH_UNIPHIER
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]385 depends on BLK && DM_MMC
Masahiro Yamadac2326532016-12-30 23:20:14 +0900[diff] [blame]386 depends on OF_CONTROL
Masahiro Yamadaa0cfcc02016-02-18 19:52:48 +0900[diff] [blame]387 help
Marek Vasut847ee0c2017-07-21 23:24:36 +0200[diff] [blame]388 This selects support for the Matsushita SD/MMC Host Controller on
Marek Vasut2883f742017-09-23 13:30:30 +0200[diff] [blame]389 SocioNext UniPhier SoCs.
390
391config RENESAS_SDHI
392 bool "Renesas R-Car SD/MMC Host Controller support"
393 depends on ARCH_RMOBILE
394 depends on BLK && DM_MMC
395 depends on OF_CONTROL
Marek Vasut9f7baeb2020-04-04 12:45:04 +0200[diff] [blame]396 select BOUNCE_BUFFER
Marek Vasut2883f742017-09-23 13:30:30 +0200[diff] [blame]397 help
398 This selects support for the Matsushita SD/MMC Host Controller on
399 Renesas R-Car SoCs.
Masahiro Yamadaa0cfcc02016-02-18 19:52:48 +0900[diff] [blame]400
Alexander Graf044725f2018-01-23 18:05:22 +0100[diff] [blame]401config MMC_BCM2835
402 bool "BCM2835 family custom SD/MMC Host Controller support"
403 depends on ARCH_BCM283X
404 depends on BLK && DM_MMC
405 depends on OF_CONTROL
406 default y
407 help
408 This selects support for the custom SD host controller in the BCM2835
409 family of devices.
410
411 If you have a BCM2835 platform with SD or MMC devices, say Y here.
412
413 If unsure, say N.
414
Paul Burton8e142842018-12-16 19:25:20 -0300[diff] [blame]415config JZ47XX_MMC
416 bool "Ingenic JZ47xx SD/MMC Host Controller support"
417 depends on ARCH_JZ47XX
418 help
419 This selects support for the SD Card Controller on Ingenic JZ47xx SoCs.
420
Masahiro Yamada54f7cfc2017-01-30 19:46:50 +0900[diff] [blame]421config MMC_SANDBOX
Simon Glassf9eebac2016-05-01 13:52:42 -0600[diff] [blame]422 bool "Sandbox MMC support"
Masahiro Yamada54f7cfc2017-01-30 19:46:50 +0900[diff] [blame]423 depends on SANDBOX
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]424 depends on BLK && DM_MMC && OF_CONTROL
Simon Glassf9eebac2016-05-01 13:52:42 -0600[diff] [blame]425 help
426 This select a dummy sandbox MMC driver. At present this does nothing
427 other than allow sandbox to be build with MMC support. This
428 improves build coverage for sandbox and makes it easier to detect
429 MMC build errors with sandbox.
430
Masahiro Yamada7db8c172016-12-07 22:10:28 +0900[diff] [blame]431config MMC_SDHCI
432 bool "Secure Digital Host Controller Interface support"
433 help
434 This selects the generic Secure Digital Host Controller Interface.
435 It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
436 and Toshiba(R). Most controllers found in laptops are of this type.
437
438 If you have a controller with this interface, say Y here.
439
440 If unsure, say N.
441
Masahiro Yamadabfd110f2016-12-07 22:10:30 +0900[diff] [blame]442config MMC_SDHCI_IO_ACCESSORS
443 bool
444 depends on MMC_SDHCI
445 help
446 This is silent Kconfig symbol that is selected by the drivers that
447 need to overwrite SDHCI IO memory accessors.
448
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]449config MMC_SDHCI_SDMA
450 bool "Support SDHCI SDMA"
451 depends on MMC_SDHCI
452 help
453 This enables support for the SDMA (Single Operation DMA) defined
454 in the SD Host Controller Standard Specification Version 1.00 .
455
Faiz Abbas4c082a62019-04-16 23:06:58 +0530[diff] [blame]456config MMC_SDHCI_ADMA
457 bool "Support SDHCI ADMA2"
458 depends on MMC_SDHCI
Michael Walle02016c62020-09-23 12:42:51 +0200[diff] [blame]459 select MMC_SDHCI_ADMA_HELPERS
Faiz Abbas4c082a62019-04-16 23:06:58 +0530[diff] [blame]460 help
461 This enables support for the ADMA (Advanced DMA) defined
462 in the SD Host Controller Standard Specification Version 3.00
463
464config SPL_MMC_SDHCI_ADMA
465 bool "Support SDHCI ADMA2 in SPL"
466 depends on MMC_SDHCI
Michael Walle02016c62020-09-23 12:42:51 +0200[diff] [blame]467 select MMC_SDHCI_ADMA_HELPERS
Faiz Abbas4c082a62019-04-16 23:06:58 +0530[diff] [blame]468 help
469 This enables support for the ADMA (Advanced DMA) defined
470 in the SD Host Controller Standard Specification Version 3.00 in SPL.
471
Eddie Jamesc8a65812019-08-27 09:48:03 -0500[diff] [blame]472config MMC_SDHCI_ASPEED
473 bool "Aspeed SDHCI controller"
474 depends on ARCH_ASPEED
475 depends on DM_MMC
476 depends on MMC_SDHCI
477 help
478 Enables support for the Aspeed SDHCI 2.0 controller present on Aspeed
479 SoCs. This device is compatible with SD 3.0 and/or MMC 4.3
480 specifications. On the AST2600, the device is also compatible with
481 MMC 5.1 and eMMC 3.0.
482
Masahiro Yamada8c1a1322017-01-30 19:46:55 +0900[diff] [blame]483config MMC_SDHCI_ATMEL
484 bool "Atmel SDHCI controller support"
485 depends on ARCH_AT91
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]486 depends on DM_MMC && BLK && ARCH_AT91
Masahiro Yamada8c1a1322017-01-30 19:46:55 +0900[diff] [blame]487 depends on MMC_SDHCI
488 help
489 This enables support for the Atmel SDHCI controller, which supports
490 the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
491 Memory Card Specification V3.0, and the SDIO V3.0 specification.
492 It is compliant with the SD Host Controller Standard V3.0
493 specification.
494
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]495config MMC_SDHCI_BCM2835
496 tristate "SDHCI support for the BCM2835 SD/MMC Controller"
497 depends on ARCH_BCM283X
498 depends on MMC_SDHCI
Masahiro Yamadabfd110f2016-12-07 22:10:30 +0900[diff] [blame]499 select MMC_SDHCI_IO_ACCESSORS
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]500 help
501 This selects the BCM2835 SD/MMC controller.
502
503 If you have a BCM2835 platform with SD or MMC devices,
504 say Y here.
505
506 If unsure, say N.
507
Thomas Fitzsimmons919646d2018-06-08 17:59:45 -0400[diff] [blame]508config MMC_SDHCI_BCMSTB
509 tristate "SDHCI support for the BCMSTB SD/MMC Controller"
510 depends on MMC_SDHCI
511 help
512 This selects the Broadcom set-top box SD/MMC controller.
513
514 If you have a BCMSTB platform with SD or MMC devices,
515 say Y here.
516
517 If unsure, say N.
518
Masahiro Yamadadcbc4432016-12-30 22:41:46 +0900[diff] [blame]519config MMC_SDHCI_CADENCE
520 bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]521 depends on BLK && DM_MMC
Masahiro Yamadadcbc4432016-12-30 22:41:46 +0900[diff] [blame]522 depends on MMC_SDHCI
523 depends on OF_CONTROL
524 help
525 This selects the Cadence SD/SDIO/eMMC driver.
526
527 If you have a controller with this interface, say Y here.
528
529 If unsure, say N.
530
Faiz Abbasd8fb3092019-06-11 00:43:31 +0530[diff] [blame]531config MMC_SDHCI_AM654
532 bool "SDHCI Controller on TI's Am654 devices"
Lokesh Vutlabc9979f2018-08-27 15:57:54 +0530[diff] [blame]533 depends on ARCH_K3
534 depends on MMC_SDHCI
535 depends on DM_MMC && OF_CONTROL && BLK
Faiz Abbase9aed582019-06-11 00:43:38 +0530[diff] [blame]536 depends on REGMAP
Faiz Abbas36c8c5c2021-02-04 15:10:54 +0530[diff] [blame]537 select MMC_SDHCI_IO_ACCESSORS
Lokesh Vutlabc9979f2018-08-27 15:57:54 +0530[diff] [blame]538 help
Faiz Abbasd8fb3092019-06-11 00:43:31 +0530[diff] [blame]539 Support for Secure Digital Host Controller Interface (SDHCI)
540 controllers present on TI's AM654 SOCs.
Lokesh Vutlabc9979f2018-08-27 15:57:54 +0530[diff] [blame]541
Arun Parameswaran2f4f34a2019-09-12 11:06:08 -0700[diff] [blame]542config MMC_SDHCI_IPROC
543 bool "SDHCI support for the iProc SD/MMC Controller"
544 depends on MMC_SDHCI
545 help
546 This selects the iProc SD/MMC controller.
547
548 If you have a Broadcom IPROC platform with SD or MMC devices,
549 say Y or M here.
550
551 If unsure, say N.
552
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]553config MMC_SDHCI_KONA
554 bool "SDHCI support on Broadcom KONA platform"
555 depends on MMC_SDHCI
556 help
557 This selects the Broadcom Kona Secure Digital Host Controller
558 Interface(SDHCI) support.
559 This is used in Broadcom mobile SoCs.
560
561 If you have a controller with this interface, say Y here.
562
Masahiro Yamadaa1262eb2017-01-30 19:46:53 +0900[diff] [blame]563config MMC_SDHCI_MSM
564 bool "Qualcomm SDHCI controller"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]565 depends on BLK && DM_MMC
Masahiro Yamadaa1262eb2017-01-30 19:46:53 +0900[diff] [blame]566 depends on MMC_SDHCI
567 help
568 Enables support for SDHCI 2.0 controller present on some Qualcomm
569 Snapdragon devices. This device is compatible with eMMC v4.5 and
570 SD 3.0 specifications. Both SD and eMMC devices are supported.
571 Card-detect gpios are not supported.
572
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]573config MMC_SDHCI_MV
574 bool "SDHCI support on Marvell platform"
575 depends on ARCH_MVEBU
576 depends on MMC_SDHCI
577 help
578 This selects the Secure Digital Host Controller Interface on
579 Marvell platform.
580
581 If you have a controller with this interface, say Y here.
582
583 If unsure, say N.
584
Masahiro Yamadaf79df032017-01-30 19:46:54 +0900[diff] [blame]585config MMC_SDHCI_PIC32
586 bool "Microchip PIC32 on-chip SDHCI support"
587 depends on DM_MMC && MACH_PIC32
588 depends on MMC_SDHCI
589 help
590 Support for Microchip PIC32 SDHCI controller.
591
Masahiro Yamadababe0262017-01-30 19:46:52 +0900[diff] [blame]592config MMC_SDHCI_ROCKCHIP
593 bool "Arasan SDHCI controller for Rockchip support"
594 depends on ARCH_ROCKCHIP
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]595 depends on DM_MMC && BLK
Masahiro Yamadababe0262017-01-30 19:46:52 +0900[diff] [blame]596 depends on MMC_SDHCI
597 help
598 Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
599
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]600config MMC_SDHCI_S5P
601 bool "SDHCI support on Samsung S5P SoC"
602 depends on MMC_SDHCI
603 help
604 This selects the Secure Digital Host Controller Interface (SDHCI)
605 on Samsung S5P SoCs.
606
607 If you have a controller with this interface, say Y here.
608
609 If unsure, say N.
610
611config MMC_SDHCI_SPEAR
612 bool "SDHCI support on ST SPEAr platform"
613 depends on MMC_SDHCI
614 help
615 This selects the Secure Digital Host Controller Interface (SDHCI)
616 often referrered to as the HSMMC block in some of the ST SPEAR range
617 of SoC
618
619 If you have a controller with this interface, say Y here.
620
621 If unsure, say N.
622
Patrice Chotard2eea7d82017-02-21 13:37:09 +0100[diff] [blame]623config MMC_SDHCI_STI
624 bool "SDHCI support for STMicroelectronics SoC"
Patrice Chotardcdf6b572017-02-21 13:37:11 +0100[diff] [blame]625 depends on MMC_SDHCI && OF_CONTROL
Patrice Chotard2eea7d82017-02-21 13:37:09 +0100[diff] [blame]626 help
627 This selects the Secure Digital Host Controller Interface (SDHCI)
628 on STMicroelectronics STiH410 SoC.
629
Stefan Roese121fc562016-12-09 15:03:28 +0100[diff] [blame]630config MMC_SDHCI_XENON
631 bool "SDHCI support for the Xenon SDHCI controller"
632 depends on MMC_SDHCI && DM_MMC && OF_CONTROL
633 help
634 Support for Xenon SDHCI host controller on Marvell Armada 3700
635 7k/8k ARM SoCs platforms
636
637 If you have a controller with this interface, say Y here.
638
639 If unsure, say N.
640
Felipe Balbib7567602017-02-20 14:24:14 +0300[diff] [blame]641config MMC_SDHCI_TANGIER
642 bool "Tangier SDHCI controller support"
643 depends on DM_MMC && BLK
644 depends on MMC_SDHCI
645 help
646 This selects support for SDHCI controller on Tanginer
647 SoC. Note that this controller does not sit on PCI bus and,
648 hence, cannot be enumerated by standard PCI means.
649
650 If you're using an Intel Tangier SoC (available on Intel
651 Edison board), say Y here.
652
653 If unsure, say N.
654
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]655config MMC_SDHCI_TEGRA
656 bool "SDHCI platform support for the Tegra SD/MMC Controller"
Trevor Woerner513f6402020-05-06 08:02:41 -0400[diff] [blame]657 depends on ARCH_TEGRA
Philipp Tomsichb3027472018-11-30 22:13:25 +0100[diff] [blame]658 select BOUNCE_BUFFER
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]659 default y
660 help
661 This selects the Tegra SD/MMC controller. If you have a Tegra
662 platform with SD or MMC devices, say Y here.
663
664 If unsure, say N.
665
Trent Piepho1bf56c32019-04-01 23:05:49 +0000[diff] [blame]666config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
667 bool "Disable external clock loopback"
668 depends on MMC_SDHCI_TEGRA && TEGRA124
669 help
670 Disable the external clock loopback and use the internal one on SDMMC3
671 as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits
672 being set to 0xfffd according to the TRM.
673
674 TODO(marcel.ziswiler@toradex.com): Move to device tree controlled
675 approach once proper kernel integration made it mainline.
676
Masahiro Yamada168c57d2017-01-30 19:46:51 +0900[diff] [blame]677config MMC_SDHCI_ZYNQ
678 bool "Arasan SDHCI controller support"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]679 depends on DM_MMC && OF_CONTROL && BLK
Masahiro Yamada168c57d2017-01-30 19:46:51 +0900[diff] [blame]680 depends on MMC_SDHCI
681 help
682 Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
683
Vipul Kumar62548002018-02-28 15:53:28 +0530[diff] [blame]684config ZYNQ_SDHCI_MAX_FREQ
685 int "Set the maximum frequency of the controller"
686 depends on MMC_SDHCI_ZYNQ
687 help
688 Set the maximum frequency of the controller.
689
Vipul Kumardcc14e32018-02-28 15:53:29 +0530[diff] [blame]690config ZYNQ_SDHCI_MIN_FREQ
691 int "Set the minimum frequency of the controller"
692 depends on MMC_SDHCI_ZYNQ
693 default 0
694 help
695 Set the minimum frequency of the controller.
696
Siva Durga Prasad Paladugua9a3d002019-05-27 14:33:14 +0530[diff] [blame]697config ZYNQ_HISPD_BROKEN
698 bool "High speed broken for Zynq SDHCI controller"
699 depends on MMC_SDHCI_ZYNQ
700 help
701 Set if high speed mode is broken.
702
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]703config MMC_SUNXI
704 bool "Allwinner sunxi SD/MMC Host Controller support"
Masahiro Yamada41ff5292017-01-12 12:16:15 +0900[diff] [blame]705 depends on ARCH_SUNXI && !UART0_PORT_F
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]706 default y
707 help
708 This selects support for the SD/MMC Host Controller on
709 Allwinner sunxi SoCs.
710
Maxime Ripard95e34702017-08-23 12:03:41 +0200[diff] [blame]711config MMC_SUNXI_HAS_NEW_MODE
712 bool
713 depends on MMC_SUNXI
714
Vasily Khoruzhickb198e2c2018-11-09 20:41:44 -0800[diff] [blame]715config MMC_SUNXI_HAS_MODE_SWITCH
716 bool
717 depends on MMC_SUNXI
718
Wenyou Yang7a7a64c2017-04-13 10:29:22 +0800[diff] [blame]719config GENERIC_ATMEL_MCI
720 bool "Atmel Multimedia Card Interface support"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]721 depends on DM_MMC && BLK && ARCH_AT91
Wenyou Yang7a7a64c2017-04-13 10:29:22 +0800[diff] [blame]722 help
723 This enables support for Atmel High Speed Multimedia Card Interface
724 (HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3,
725 the SD Memory Card Specification V2.0, the SDIO V2.0 specification
726 and CE-ATA V1.1.
727
Patrice Chotardae19b812017-09-04 17:56:22 +0200[diff] [blame]728config STM32_SDMMC2
729 bool "STMicroelectronics STM32H7 SD/MMC Host Controller support"
Patrice Chotard4cb0ac92017-10-03 15:54:58 +0200[diff] [blame]730 depends on DM_MMC && BLK && OF_CONTROL
Patrice Chotardae19b812017-09-04 17:56:22 +0200[diff] [blame]731 help
732 This selects support for the SD/MMC controller on STM32H7 SoCs.
733 If you have a board based on such a SoC and with a SD/MMC slot,
734 say Y or M here.
735
Rick Chencbb52972017-11-14 14:47:09 +0800[diff] [blame]736config FTSDC010
737 bool "Ftsdc010 SD/MMC controller Support"
738 help
739 This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP.
740
Rick Chenc59a6fb2018-03-20 15:10:49 +0800[diff] [blame]741config FTSDC010_SDIO
742 bool "Support ftsdc010 sdio"
743 default n
744 depends on FTSDC010
745 help
746 This can enable ftsdc010 sdio function.
747
developerdc5a9aa2018-11-15 10:08:04 +0800[diff] [blame]748config MMC_MTK
749 bool "MediaTek SD/MMC Card Interface support"
developer607faf72019-09-25 17:45:37 +0800[diff] [blame]750 depends on ARCH_MEDIATEK || ARCH_MTMIPS
developerdc5a9aa2018-11-15 10:08:04 +0800[diff] [blame]751 depends on BLK && DM_MMC
752 depends on OF_CONTROL
753 help
754 This selects the MediaTek(R) Secure digital and Multimedia card Interface.
755 If you have a machine with a integrated SD/MMC card reader, say Y or M here.
756 This is needed if support for any SD/SDIO/MMC devices is required.
757 If unsure, say N.
758
Masahiro Yamadae8b99722016-12-07 22:10:27 +0900[diff] [blame]759endif
760
Mario Six41d7d972018-03-28 14:38:19 +0200[diff] [blame]761config FSL_ESDHC
762 bool "Freescale/NXP eSDHC controller support"
763 help
Yangbo Lu982f4252019-06-21 11:42:27 +0800[diff] [blame]764 This selects support for the eSDHC (Enhanced Secure Digital Host
765 Controller) found on numerous Freescale/NXP SoCs.
766
Michael Walle081d4012020-10-12 10:07:14 +0200[diff] [blame]767config FSL_ESDHC_SUPPORT_ADMA2
768 bool "enable ADMA2 support"
769 depends on FSL_ESDHC
770 select MMC_SDHCI_ADMA_HELPERS
771 help
772 This enables support for the ADMA2 transfer mode. If supported by the
773 eSDHC it will allow 64bit DMA addresses.
774
Yangbo Luce884022020-05-19 11:06:44 +0800[diff] [blame]775config FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND
776 bool "enable eSDHC workaround for 3.3v IO reliability issue"
777 depends on FSL_ESDHC && DM_MMC
778 default n
779 help
780 When eSDHC operates at 3.3v, damage can accumulate in an internal
781 level shifter at a higher than expected rate. The faster the interface
782 runs, the more damage accumulates. This issue now is found on LX2160A
783 eSDHC1 for only SD card. The hardware workaround is recommended to use
784 an on-board level shifter that is 1.8v on SoC side and 3.3v on SD card
785 side. For boards without hardware workaround, this option could be
786 enabled, ensuring 1.8v IO voltage and disabling eSDHC if no card.
787 This option assumes no hotplug, and u-boot has to make all the way to
788 to linux to use 1.8v UHS-I speed mode if has card.
789
Yangbo Lu982f4252019-06-21 11:42:27 +0800[diff] [blame]790config FSL_ESDHC_IMX
791 bool "Freescale/NXP i.MX eSDHC controller support"
792 help
793 This selects support for the i.MX eSDHC (Enhanced Secure Digital Host
794 Controller) found on numerous Freescale/NXP SoCs.
Mario Six41d7d972018-03-28 14:38:19 +0200[diff] [blame]795
Adam Ford01836582019-08-14 07:23:43 -0500[diff] [blame]796config FSL_USDHC
797 bool "Freescale/NXP i.MX uSDHC controller support"
Giulio Benetti65b5ec12020-01-10 15:51:46 +0100[diff] [blame]798 depends on MX6 || MX7 ||ARCH_MX7ULP || IMX8 || IMX8M || IMXRT || TARGET_S32V234EVB
Adam Ford01836582019-08-14 07:23:43 -0500[diff] [blame]799 select FSL_ESDHC_IMX
800 help
801 This enables the Ultra Secured Digital Host Controller enhancements
802
Nobuhiro Iwamatsu3ec5f862014-12-17 08:03:00 +0900[diff] [blame]803endmenu
York Sun097e3602016-12-28 08:43:42 -0800[diff] [blame]804
805config SYS_FSL_ERRATUM_ESDHC111
806 bool
807
808config SYS_FSL_ERRATUM_ESDHC13
809 bool
810
811config SYS_FSL_ERRATUM_ESDHC135
812 bool
813
814config SYS_FSL_ERRATUM_ESDHC_A001
815 bool
Michael Walle148dc612021-03-17 15:01:36 +0100[diff] [blame^]816
817config SYS_FSL_ERRATUM_A011334
818 bool