Tom Rini | 10e4779 | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
Marek Vasut | 00671d9 | 2017-10-09 21:51:10 +0200 | [diff] [blame] | 2 | /* |
| 3 | * DHCOM DH-iMX6 PDK SPL support |
| 4 | * |
| 5 | * Copyright (C) 2017 Marek Vasut <marex@denx.de> |
Marek Vasut | 00671d9 | 2017-10-09 21:51:10 +0200 | [diff] [blame] | 6 | */ |
| 7 | |
| 8 | #include <common.h> |
| 9 | #include <asm/arch/clock.h> |
| 10 | #include <asm/arch/crm_regs.h> |
| 11 | #include <asm/arch/imx-regs.h> |
| 12 | #include <asm/arch/iomux.h> |
| 13 | #include <asm/arch/mx6-ddr.h> |
| 14 | #include <asm/arch/mx6-pins.h> |
| 15 | #include <asm/arch/sys_proto.h> |
| 16 | #include <asm/gpio.h> |
| 17 | #include <asm/mach-imx/boot_mode.h> |
| 18 | #include <asm/mach-imx/iomux-v3.h> |
| 19 | #include <asm/mach-imx/mxc_i2c.h> |
| 20 | #include <asm/io.h> |
| 21 | #include <errno.h> |
| 22 | #include <fuse.h> |
| 23 | #include <fsl_esdhc.h> |
| 24 | #include <i2c.h> |
| 25 | #include <mmc.h> |
| 26 | #include <spl.h> |
| 27 | |
| 28 | #define ENET_PAD_CTRL \ |
| 29 | (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ |
| 30 | PAD_CTL_HYS) |
| 31 | |
| 32 | #define GPIO_PAD_CTRL \ |
| 33 | (PAD_CTL_HYS | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm) |
| 34 | |
| 35 | #define SPI_PAD_CTRL \ |
| 36 | (PAD_CTL_HYS | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ |
| 37 | PAD_CTL_SRE_FAST) |
| 38 | |
| 39 | #define UART_PAD_CTRL \ |
| 40 | (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ |
| 41 | PAD_CTL_SRE_FAST | PAD_CTL_HYS) |
| 42 | |
| 43 | #define USDHC_PAD_CTRL \ |
| 44 | (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ |
| 45 | PAD_CTL_SRE_FAST | PAD_CTL_HYS) |
| 46 | |
Marek Vasut | 00671d9 | 2017-10-09 21:51:10 +0200 | [diff] [blame] | 47 | static const struct mx6dq_iomux_ddr_regs dhcom6dq_ddr_ioregs = { |
| 48 | .dram_sdclk_0 = 0x00020030, |
| 49 | .dram_sdclk_1 = 0x00020030, |
| 50 | .dram_cas = 0x00020030, |
| 51 | .dram_ras = 0x00020030, |
| 52 | .dram_reset = 0x00020030, |
| 53 | .dram_sdcke0 = 0x00003000, |
| 54 | .dram_sdcke1 = 0x00003000, |
| 55 | .dram_sdba2 = 0x00000000, |
| 56 | .dram_sdodt0 = 0x00003030, |
| 57 | .dram_sdodt1 = 0x00003030, |
| 58 | .dram_sdqs0 = 0x00000030, |
| 59 | .dram_sdqs1 = 0x00000030, |
| 60 | .dram_sdqs2 = 0x00000030, |
| 61 | .dram_sdqs3 = 0x00000030, |
| 62 | .dram_sdqs4 = 0x00000030, |
| 63 | .dram_sdqs5 = 0x00000030, |
| 64 | .dram_sdqs6 = 0x00000030, |
| 65 | .dram_sdqs7 = 0x00000030, |
| 66 | .dram_dqm0 = 0x00020030, |
| 67 | .dram_dqm1 = 0x00020030, |
| 68 | .dram_dqm2 = 0x00020030, |
| 69 | .dram_dqm3 = 0x00020030, |
| 70 | .dram_dqm4 = 0x00020030, |
| 71 | .dram_dqm5 = 0x00020030, |
| 72 | .dram_dqm6 = 0x00020030, |
| 73 | .dram_dqm7 = 0x00020030, |
| 74 | }; |
| 75 | |
| 76 | static const struct mx6dq_iomux_grp_regs dhcom6dq_grp_ioregs = { |
| 77 | .grp_ddr_type = 0x000C0000, |
| 78 | .grp_ddrmode_ctl = 0x00020000, |
| 79 | .grp_ddrpke = 0x00000000, |
| 80 | .grp_addds = 0x00000030, |
| 81 | .grp_ctlds = 0x00000030, |
| 82 | .grp_ddrmode = 0x00020000, |
| 83 | .grp_b0ds = 0x00000030, |
| 84 | .grp_b1ds = 0x00000030, |
| 85 | .grp_b2ds = 0x00000030, |
| 86 | .grp_b3ds = 0x00000030, |
| 87 | .grp_b4ds = 0x00000030, |
| 88 | .grp_b5ds = 0x00000030, |
| 89 | .grp_b6ds = 0x00000030, |
| 90 | .grp_b7ds = 0x00000030, |
| 91 | }; |
| 92 | |
| 93 | static const struct mx6sdl_iomux_ddr_regs dhcom6sdl_ddr_ioregs = { |
| 94 | .dram_sdclk_0 = 0x00020030, |
| 95 | .dram_sdclk_1 = 0x00020030, |
| 96 | .dram_cas = 0x00020030, |
| 97 | .dram_ras = 0x00020030, |
| 98 | .dram_reset = 0x00020030, |
| 99 | .dram_sdcke0 = 0x00003000, |
| 100 | .dram_sdcke1 = 0x00003000, |
| 101 | .dram_sdba2 = 0x00000000, |
| 102 | .dram_sdodt0 = 0x00003030, |
| 103 | .dram_sdodt1 = 0x00003030, |
| 104 | .dram_sdqs0 = 0x00000030, |
| 105 | .dram_sdqs1 = 0x00000030, |
| 106 | .dram_sdqs2 = 0x00000030, |
| 107 | .dram_sdqs3 = 0x00000030, |
| 108 | .dram_sdqs4 = 0x00000030, |
| 109 | .dram_sdqs5 = 0x00000030, |
| 110 | .dram_sdqs6 = 0x00000030, |
| 111 | .dram_sdqs7 = 0x00000030, |
| 112 | .dram_dqm0 = 0x00020030, |
| 113 | .dram_dqm1 = 0x00020030, |
| 114 | .dram_dqm2 = 0x00020030, |
| 115 | .dram_dqm3 = 0x00020030, |
| 116 | .dram_dqm4 = 0x00020030, |
| 117 | .dram_dqm5 = 0x00020030, |
| 118 | .dram_dqm6 = 0x00020030, |
| 119 | .dram_dqm7 = 0x00020030, |
| 120 | }; |
| 121 | |
| 122 | static const struct mx6sdl_iomux_grp_regs dhcom6sdl_grp_ioregs = { |
| 123 | .grp_ddr_type = 0x000C0000, |
| 124 | .grp_ddrmode_ctl = 0x00020000, |
| 125 | .grp_ddrpke = 0x00000000, |
| 126 | .grp_addds = 0x00000030, |
| 127 | .grp_ctlds = 0x00000030, |
| 128 | .grp_ddrmode = 0x00020000, |
| 129 | .grp_b0ds = 0x00000030, |
| 130 | .grp_b1ds = 0x00000030, |
| 131 | .grp_b2ds = 0x00000030, |
| 132 | .grp_b3ds = 0x00000030, |
| 133 | .grp_b4ds = 0x00000030, |
| 134 | .grp_b5ds = 0x00000030, |
| 135 | .grp_b6ds = 0x00000030, |
| 136 | .grp_b7ds = 0x00000030, |
| 137 | }; |
| 138 | |
Ludwig Zenz | 1b35d90 | 2018-07-05 09:23:48 +0200 | [diff] [blame] | 139 | static const struct mx6_mmdc_calibration dhcom_mmdc_calib_4x4g_1066 = { |
| 140 | .p0_mpwldectrl0 = 0x00150019, |
| 141 | .p0_mpwldectrl1 = 0x001C000B, |
| 142 | .p1_mpwldectrl0 = 0x00020018, |
| 143 | .p1_mpwldectrl1 = 0x0002000C, |
| 144 | .p0_mpdgctrl0 = 0x43140320, |
| 145 | .p0_mpdgctrl1 = 0x03080304, |
| 146 | .p1_mpdgctrl0 = 0x43180320, |
| 147 | .p1_mpdgctrl1 = 0x03100254, |
| 148 | .p0_mprddlctl = 0x4830383C, |
| 149 | .p1_mprddlctl = 0x3836323E, |
| 150 | .p0_mpwrdlctl = 0x3E444642, |
| 151 | .p1_mpwrdlctl = 0x42344442, |
| 152 | }; |
| 153 | |
| 154 | static const struct mx6_mmdc_calibration dhcom_mmdc_calib_2x4g_800 = { |
| 155 | .p0_mpwldectrl0 = 0x0040003C, |
| 156 | .p0_mpwldectrl1 = 0x0032003E, |
| 157 | .p0_mpdgctrl0 = 0x42350231, |
| 158 | .p0_mpdgctrl1 = 0x021A0218, |
| 159 | .p0_mprddlctl = 0x4B4B4E49, |
| 160 | .p0_mpwrdlctl = 0x3F3F3035, |
| 161 | }; |
| 162 | |
| 163 | static const struct mx6_mmdc_calibration dhcom_mmdc_calib_4x2g_1066 = { |
Ludwig Zenz | 4ab232b | 2019-04-15 09:31:10 +0200 | [diff] [blame] | 164 | .p0_mpwldectrl0 = 0x001a001a, |
| 165 | .p0_mpwldectrl1 = 0x00260015, |
| 166 | .p0_mpdgctrl0 = 0x030c0320, |
| 167 | .p0_mpdgctrl1 = 0x03100304, |
| 168 | .p0_mprddlctl = 0x432e3538, |
| 169 | .p0_mpwrdlctl = 0x363f423d, |
| 170 | .p1_mpwldectrl0 = 0x0006001e, |
| 171 | .p1_mpwldectrl1 = 0x00050015, |
| 172 | .p1_mpdgctrl0 = 0x031c0324, |
| 173 | .p1_mpdgctrl1 = 0x030c0258, |
| 174 | .p1_mprddlctl = 0x3834313f, |
| 175 | .p1_mpwrdlctl = 0x47374a42, |
Marek Vasut | 00671d9 | 2017-10-09 21:51:10 +0200 | [diff] [blame] | 176 | }; |
| 177 | |
Ludwig Zenz | 1b35d90 | 2018-07-05 09:23:48 +0200 | [diff] [blame] | 178 | static const struct mx6_mmdc_calibration dhcom_mmdc_calib_4x2g_800 = { |
| 179 | .p0_mpwldectrl0 = 0x003A003A, |
| 180 | .p0_mpwldectrl1 = 0x0030002F, |
| 181 | .p1_mpwldectrl0 = 0x002F0038, |
| 182 | .p1_mpwldectrl1 = 0x00270039, |
| 183 | .p0_mpdgctrl0 = 0x420F020F, |
| 184 | .p0_mpdgctrl1 = 0x01760175, |
| 185 | .p1_mpdgctrl0 = 0x41640171, |
| 186 | .p1_mpdgctrl1 = 0x015E0160, |
| 187 | .p0_mprddlctl = 0x45464B4A, |
| 188 | .p1_mprddlctl = 0x49484A46, |
| 189 | .p0_mpwrdlctl = 0x40402E32, |
| 190 | .p1_mpwrdlctl = 0x3A3A3231, |
| 191 | }; |
| 192 | |
| 193 | static const struct mx6_mmdc_calibration dhcom_mmdc_calib_2x2g_800 = { |
| 194 | .p0_mpwldectrl0 = 0x0040003C, |
| 195 | .p0_mpwldectrl1 = 0x0032003E, |
| 196 | .p0_mpdgctrl0 = 0x42350231, |
| 197 | .p0_mpdgctrl1 = 0x021A0218, |
| 198 | .p0_mprddlctl = 0x4B4B4E49, |
| 199 | .p0_mpwrdlctl = 0x3F3F3035, |
| 200 | }; |
| 201 | |
| 202 | /* |
| 203 | * 2 Gbit DDR3 memory |
| 204 | * - NANYA #NT5CC128M16IP-DII |
| 205 | * - NANYA #NT5CB128M16FP-DII |
| 206 | */ |
| 207 | static const struct mx6_ddr3_cfg dhcom_mem_ddr_2g = { |
Marek Vasut | 00671d9 | 2017-10-09 21:51:10 +0200 | [diff] [blame] | 208 | .mem_speed = 1600, |
Marek Vasut | 1d0b09b | 2017-11-09 11:50:13 +0100 | [diff] [blame] | 209 | .density = 2, |
Ludwig Zenz | 1b35d90 | 2018-07-05 09:23:48 +0200 | [diff] [blame] | 210 | .width = 16, |
Marek Vasut | 00671d9 | 2017-10-09 21:51:10 +0200 | [diff] [blame] | 211 | .banks = 8, |
| 212 | .rowaddr = 14, |
| 213 | .coladdr = 10, |
| 214 | .pagesz = 2, |
Ludwig Zenz | 1b35d90 | 2018-07-05 09:23:48 +0200 | [diff] [blame] | 215 | .trcd = 1375, |
Marek Vasut | 1d0b09b | 2017-11-09 11:50:13 +0100 | [diff] [blame] | 216 | .trcmin = 5863, |
| 217 | .trasmin = 3750, |
Marek Vasut | 00671d9 | 2017-10-09 21:51:10 +0200 | [diff] [blame] | 218 | }; |
| 219 | |
Ludwig Zenz | 1b35d90 | 2018-07-05 09:23:48 +0200 | [diff] [blame] | 220 | /* |
| 221 | * 4 Gbit DDR3 memory |
| 222 | * - Intelligent Memory #IM4G16D3EABG-125I |
| 223 | */ |
| 224 | static const struct mx6_ddr3_cfg dhcom_mem_ddr_4g = { |
| 225 | .mem_speed = 1600, |
| 226 | .density = 4, |
| 227 | .width = 16, |
| 228 | .banks = 8, |
| 229 | .rowaddr = 15, |
| 230 | .coladdr = 10, |
| 231 | .pagesz = 2, |
| 232 | .trcd = 1375, |
| 233 | .trcmin = 4875, |
| 234 | .trasmin = 3500, |
| 235 | }; |
| 236 | |
| 237 | /* DDR3 64bit */ |
| 238 | static const struct mx6_ddr_sysinfo dhcom_ddr_64bit = { |
Marek Vasut | 00671d9 | 2017-10-09 21:51:10 +0200 | [diff] [blame] | 239 | /* width of data bus:0=16,1=32,2=64 */ |
| 240 | .dsize = 2, |
Ludwig Zenz | 1b35d90 | 2018-07-05 09:23:48 +0200 | [diff] [blame] | 241 | .cs_density = 32, |
Marek Vasut | 00671d9 | 2017-10-09 21:51:10 +0200 | [diff] [blame] | 242 | .ncs = 1, /* single chip select */ |
Marek Vasut | 1d0b09b | 2017-11-09 11:50:13 +0100 | [diff] [blame] | 243 | .cs1_mirror = 1, |
Marek Vasut | 00671d9 | 2017-10-09 21:51:10 +0200 | [diff] [blame] | 244 | .rtt_wr = 1, /* DDR3_RTT_60_OHM, RTT_Wr = RZQ/4 */ |
| 245 | .rtt_nom = 1, /* DDR3_RTT_60_OHM, RTT_Nom = RZQ/4 */ |
| 246 | .walat = 1, /* Write additional latency */ |
| 247 | .ralat = 5, /* Read additional latency */ |
| 248 | .mif3_mode = 3, /* Command prediction working mode */ |
| 249 | .bi_on = 1, /* Bank interleaving enabled */ |
| 250 | .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ |
| 251 | .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ |
Marek Vasut | 1d0b09b | 2017-11-09 11:50:13 +0100 | [diff] [blame] | 252 | .refsel = 1, /* Refresh cycles at 32KHz */ |
| 253 | .refr = 3, /* 4 refresh commands per refresh cycle */ |
Marek Vasut | 00671d9 | 2017-10-09 21:51:10 +0200 | [diff] [blame] | 254 | }; |
| 255 | |
Ludwig Zenz | 1b35d90 | 2018-07-05 09:23:48 +0200 | [diff] [blame] | 256 | /* DDR3 32bit */ |
| 257 | static const struct mx6_ddr_sysinfo dhcom_ddr_32bit = { |
| 258 | /* width of data bus:0=16,1=32,2=64 */ |
| 259 | .dsize = 1, |
| 260 | .cs_density = 32, |
| 261 | .ncs = 1, /* single chip select */ |
| 262 | .cs1_mirror = 1, |
| 263 | .rtt_wr = 1, /* DDR3_RTT_60_OHM, RTT_Wr = RZQ/4 */ |
| 264 | .rtt_nom = 1, /* DDR3_RTT_60_OHM, RTT_Nom = RZQ/4 */ |
| 265 | .walat = 1, /* Write additional latency */ |
| 266 | .ralat = 5, /* Read additional latency */ |
| 267 | .mif3_mode = 3, /* Command prediction working mode */ |
| 268 | .bi_on = 1, /* Bank interleaving enabled */ |
| 269 | .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ |
| 270 | .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ |
| 271 | .refsel = 1, /* Refresh cycles at 32KHz */ |
| 272 | .refr = 3, /* 4 refresh commands per refresh cycle */ |
| 273 | }; |
| 274 | |
Marek Vasut | 00671d9 | 2017-10-09 21:51:10 +0200 | [diff] [blame] | 275 | static void ccgr_init(void) |
| 276 | { |
| 277 | struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; |
| 278 | |
| 279 | writel(0x00C03F3F, &ccm->CCGR0); |
| 280 | writel(0x0030FC03, &ccm->CCGR1); |
| 281 | writel(0x0FFFC000, &ccm->CCGR2); |
| 282 | writel(0x3FF00000, &ccm->CCGR3); |
| 283 | writel(0x00FFF300, &ccm->CCGR4); |
| 284 | writel(0x0F0000C3, &ccm->CCGR5); |
| 285 | writel(0x000003FF, &ccm->CCGR6); |
| 286 | } |
| 287 | |
| 288 | /* Board ID */ |
| 289 | static iomux_v3_cfg_t const hwcode_pads[] = { |
| 290 | IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 291 | IOMUX_PADS(PAD_EIM_A23__GPIO6_IO06 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 292 | IOMUX_PADS(PAD_EIM_A22__GPIO2_IO16 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 293 | }; |
| 294 | |
| 295 | static void setup_iomux_boardid(void) |
| 296 | { |
| 297 | /* HW code pins: Setup alternate function and configure pads */ |
| 298 | SETUP_IOMUX_PADS(hwcode_pads); |
| 299 | } |
| 300 | |
Ludwig Zenz | 63fa845 | 2018-07-05 09:23:47 +0200 | [diff] [blame] | 301 | /* DDR Code */ |
| 302 | static iomux_v3_cfg_t const ddrcode_pads[] = { |
| 303 | IOMUX_PADS(PAD_EIM_A16__GPIO2_IO22 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 304 | IOMUX_PADS(PAD_EIM_A17__GPIO2_IO21 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 305 | }; |
| 306 | |
| 307 | static void setup_iomux_ddrcode(void) |
| 308 | { |
| 309 | /* ddr code pins */ |
| 310 | SETUP_IOMUX_PADS(ddrcode_pads); |
| 311 | } |
| 312 | |
| 313 | enum dhcom_ddr3_code { |
| 314 | DH_DDR3_SIZE_256MIB = 0x00, |
| 315 | DH_DDR3_SIZE_512MIB = 0x01, |
| 316 | DH_DDR3_SIZE_1GIB = 0x02, |
| 317 | DH_DDR3_SIZE_2GIB = 0x03 |
| 318 | }; |
| 319 | |
| 320 | #define DDR3_CODE_BIT_0 IMX_GPIO_NR(2, 22) |
| 321 | #define DDR3_CODE_BIT_1 IMX_GPIO_NR(2, 21) |
| 322 | |
| 323 | enum dhcom_ddr3_code dhcom_get_ddr3_code(void) |
| 324 | { |
| 325 | enum dhcom_ddr3_code ddr3_code; |
| 326 | |
| 327 | gpio_request(DDR3_CODE_BIT_0, "DDR3_CODE_BIT_0"); |
| 328 | gpio_request(DDR3_CODE_BIT_1, "DDR3_CODE_BIT_1"); |
| 329 | |
| 330 | gpio_direction_input(DDR3_CODE_BIT_0); |
| 331 | gpio_direction_input(DDR3_CODE_BIT_1); |
| 332 | |
| 333 | /* 256MB = 0b00; 512MB = 0b01; 1GB = 0b10; 2GB = 0b11 */ |
| 334 | ddr3_code = (!!gpio_get_value(DDR3_CODE_BIT_1) << 1) |
| 335 | | (!!gpio_get_value(DDR3_CODE_BIT_0)); |
| 336 | |
| 337 | return ddr3_code; |
| 338 | } |
| 339 | |
Marek Vasut | 00671d9 | 2017-10-09 21:51:10 +0200 | [diff] [blame] | 340 | /* GPIO */ |
| 341 | static iomux_v3_cfg_t const gpio_pads[] = { |
| 342 | IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 343 | IOMUX_PADS(PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 344 | IOMUX_PADS(PAD_GPIO_5__GPIO1_IO05 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 345 | IOMUX_PADS(PAD_CSI0_DAT17__GPIO6_IO03 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 346 | IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 347 | IOMUX_PADS(PAD_DI0_PIN4__GPIO4_IO20 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 348 | IOMUX_PADS(PAD_EIM_D27__GPIO3_IO27 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 349 | IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 350 | IOMUX_PADS(PAD_KEY_COL1__GPIO4_IO08 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 351 | IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 352 | IOMUX_PADS(PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 353 | IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 354 | IOMUX_PADS(PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 355 | IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 356 | IOMUX_PADS(PAD_CSI0_VSYNC__GPIO5_IO21 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 357 | IOMUX_PADS(PAD_GPIO_18__GPIO7_IO13 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 358 | IOMUX_PADS(PAD_SD1_CMD__GPIO1_IO18 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 359 | IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 360 | IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 361 | IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 362 | IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 363 | IOMUX_PADS(PAD_CSI0_PIXCLK__GPIO5_IO18 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 364 | IOMUX_PADS(PAD_CSI0_MCLK__GPIO5_IO19 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), |
| 365 | }; |
| 366 | |
| 367 | static void setup_iomux_gpio(void) |
| 368 | { |
| 369 | SETUP_IOMUX_PADS(gpio_pads); |
| 370 | } |
| 371 | |
| 372 | /* Ethernet */ |
| 373 | static iomux_v3_cfg_t const enet_pads[] = { |
| 374 | IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)), |
| 375 | IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)), |
| 376 | IOMUX_PADS(PAD_ENET_TX_EN__ENET_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL)), |
| 377 | IOMUX_PADS(PAD_ENET_TXD0__ENET_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL)), |
| 378 | IOMUX_PADS(PAD_ENET_TXD1__ENET_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL)), |
| 379 | IOMUX_PADS(PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL)), |
| 380 | IOMUX_PADS(PAD_ENET_RX_ER__ENET_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL)), |
| 381 | IOMUX_PADS(PAD_ENET_RXD0__ENET_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL)), |
| 382 | IOMUX_PADS(PAD_ENET_RXD1__ENET_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL)), |
| 383 | IOMUX_PADS(PAD_ENET_CRS_DV__ENET_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL)), |
| 384 | /* SMSC PHY Reset */ |
| 385 | IOMUX_PADS(PAD_EIM_WAIT__GPIO5_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)), |
| 386 | /* ENET_VIO_GPIO */ |
| 387 | IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)), |
| 388 | /* ENET_Interrupt - (not used) */ |
| 389 | IOMUX_PADS(PAD_RGMII_RD0__GPIO6_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL)), |
| 390 | }; |
| 391 | |
| 392 | static void setup_iomux_enet(void) |
| 393 | { |
| 394 | SETUP_IOMUX_PADS(enet_pads); |
| 395 | } |
| 396 | |
| 397 | /* SD interface */ |
| 398 | static iomux_v3_cfg_t const usdhc2_pads[] = { |
| 399 | IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 400 | IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 401 | IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 402 | IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 403 | IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 404 | IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 405 | IOMUX_PADS(PAD_NANDF_CS3__GPIO6_IO16 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* CD */ |
| 406 | }; |
| 407 | |
| 408 | /* onboard microSD */ |
| 409 | static iomux_v3_cfg_t const usdhc3_pads[] = { |
| 410 | IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 411 | IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 412 | IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 413 | IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 414 | IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 415 | IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 416 | IOMUX_PADS(PAD_SD3_RST__GPIO7_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* CD */ |
| 417 | }; |
| 418 | |
| 419 | /* eMMC */ |
| 420 | static iomux_v3_cfg_t const usdhc4_pads[] = { |
| 421 | IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 422 | IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 423 | IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 424 | IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 425 | IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 426 | IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 427 | IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 428 | IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 429 | IOMUX_PADS(PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 430 | IOMUX_PADS(PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 431 | }; |
| 432 | |
| 433 | /* SD */ |
| 434 | static void setup_iomux_sd(void) |
| 435 | { |
| 436 | SETUP_IOMUX_PADS(usdhc2_pads); |
| 437 | SETUP_IOMUX_PADS(usdhc3_pads); |
| 438 | SETUP_IOMUX_PADS(usdhc4_pads); |
| 439 | } |
| 440 | |
| 441 | /* SPI */ |
| 442 | static iomux_v3_cfg_t const ecspi1_pads[] = { |
| 443 | /* SS0 */ |
| 444 | IOMUX_PADS(PAD_EIM_EB2__GPIO2_IO30 | MUX_PAD_CTRL(SPI_PAD_CTRL)), |
| 445 | IOMUX_PADS(PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL)), |
| 446 | IOMUX_PADS(PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL)), |
| 447 | IOMUX_PADS(PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL)), |
| 448 | }; |
| 449 | |
| 450 | static void setup_iomux_spi(void) |
| 451 | { |
| 452 | SETUP_IOMUX_PADS(ecspi1_pads); |
| 453 | } |
| 454 | |
| 455 | int board_spi_cs_gpio(unsigned bus, unsigned cs) |
| 456 | { |
| 457 | if (bus == 0 && cs == 0) |
| 458 | return IMX_GPIO_NR(2, 30); |
| 459 | else |
| 460 | return -1; |
| 461 | } |
| 462 | |
| 463 | /* UART */ |
| 464 | static iomux_v3_cfg_t const uart1_pads[] = { |
| 465 | IOMUX_PADS(PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), |
| 466 | IOMUX_PADS(PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), |
| 467 | }; |
| 468 | |
| 469 | static void setup_iomux_uart(void) |
| 470 | { |
| 471 | SETUP_IOMUX_PADS(uart1_pads); |
| 472 | } |
| 473 | |
| 474 | /* USB */ |
| 475 | static iomux_v3_cfg_t const usb_pads[] = { |
| 476 | IOMUX_PADS(PAD_GPIO_1__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL)), |
| 477 | IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)), |
| 478 | }; |
| 479 | |
| 480 | static void setup_iomux_usb(void) |
| 481 | { |
| 482 | SETUP_IOMUX_PADS(usb_pads); |
| 483 | } |
| 484 | |
Ludwig Zenz | 11952f8 | 2019-04-15 11:13:08 +0200 | [diff] [blame] | 485 | /* Perform DDR DRAM calibration */ |
| 486 | static int spl_dram_perform_cal(struct mx6_ddr_sysinfo const *sysinfo) |
| 487 | { |
| 488 | int ret = 0; |
| 489 | |
| 490 | #ifdef CONFIG_MX6_DDRCAL |
| 491 | udelay(100); |
| 492 | ret = mmdc_do_write_level_calibration(sysinfo); |
| 493 | if (ret) { |
| 494 | printf("DDR3: Write level calibration error [%d]\n", ret); |
| 495 | return ret; |
| 496 | } |
| 497 | |
| 498 | ret = mmdc_do_dqs_calibration(sysinfo); |
| 499 | if (ret) { |
| 500 | printf("DDR3: DQS calibration error [%d]\n", ret); |
| 501 | return ret; |
| 502 | } |
| 503 | #endif /* CONFIG_MX6_DDRCAL */ |
| 504 | |
| 505 | return ret; |
| 506 | } |
| 507 | |
Ludwig Zenz | 1b35d90 | 2018-07-05 09:23:48 +0200 | [diff] [blame] | 508 | |
| 509 | /* DRAM */ |
| 510 | static void dhcom_spl_dram_init(void) |
| 511 | { |
| 512 | enum dhcom_ddr3_code ddr3_code = dhcom_get_ddr3_code(); |
| 513 | |
| 514 | if (is_mx6dq()) { |
| 515 | mx6dq_dram_iocfg(64, &dhcom6dq_ddr_ioregs, |
| 516 | &dhcom6dq_grp_ioregs); |
| 517 | switch (ddr3_code) { |
| 518 | default: |
| 519 | printf("imx6qd: unsupported ddr3 code %d\n", ddr3_code); |
| 520 | printf(" choosing 1024 MB\n"); |
| 521 | /* fall through */ |
| 522 | case DH_DDR3_SIZE_1GIB: |
| 523 | mx6_dram_cfg(&dhcom_ddr_64bit, |
| 524 | &dhcom_mmdc_calib_4x2g_1066, |
| 525 | &dhcom_mem_ddr_2g); |
| 526 | break; |
| 527 | case DH_DDR3_SIZE_2GIB: |
| 528 | mx6_dram_cfg(&dhcom_ddr_64bit, |
| 529 | &dhcom_mmdc_calib_4x4g_1066, |
| 530 | &dhcom_mem_ddr_4g); |
| 531 | break; |
| 532 | } |
| 533 | |
| 534 | /* Perform DDR DRAM calibration */ |
Ludwig Zenz | 11952f8 | 2019-04-15 11:13:08 +0200 | [diff] [blame] | 535 | spl_dram_perform_cal(&dhcom_ddr_64bit); |
Ludwig Zenz | 1b35d90 | 2018-07-05 09:23:48 +0200 | [diff] [blame] | 536 | |
| 537 | } else if (is_cpu_type(MXC_CPU_MX6DL)) { |
| 538 | mx6sdl_dram_iocfg(64, &dhcom6sdl_ddr_ioregs, |
| 539 | &dhcom6sdl_grp_ioregs); |
| 540 | switch (ddr3_code) { |
| 541 | default: |
| 542 | printf("imx6dl: unsupported ddr3 code %d\n", ddr3_code); |
| 543 | printf(" choosing 1024 MB\n"); |
| 544 | /* fall through */ |
| 545 | case DH_DDR3_SIZE_1GIB: |
| 546 | mx6_dram_cfg(&dhcom_ddr_64bit, |
| 547 | &dhcom_mmdc_calib_4x2g_800, |
| 548 | &dhcom_mem_ddr_2g); |
| 549 | break; |
| 550 | } |
| 551 | |
| 552 | /* Perform DDR DRAM calibration */ |
Ludwig Zenz | 11952f8 | 2019-04-15 11:13:08 +0200 | [diff] [blame] | 553 | spl_dram_perform_cal(&dhcom_ddr_64bit); |
Ludwig Zenz | 1b35d90 | 2018-07-05 09:23:48 +0200 | [diff] [blame] | 554 | |
| 555 | } else if (is_cpu_type(MXC_CPU_MX6SOLO)) { |
| 556 | mx6sdl_dram_iocfg(32, &dhcom6sdl_ddr_ioregs, |
| 557 | &dhcom6sdl_grp_ioregs); |
| 558 | switch (ddr3_code) { |
| 559 | default: |
| 560 | printf("imx6s: unsupported ddr3 code %d\n", ddr3_code); |
| 561 | printf(" choosing 512 MB\n"); |
| 562 | /* fall through */ |
| 563 | case DH_DDR3_SIZE_512MIB: |
| 564 | mx6_dram_cfg(&dhcom_ddr_32bit, |
| 565 | &dhcom_mmdc_calib_2x2g_800, |
| 566 | &dhcom_mem_ddr_2g); |
| 567 | break; |
| 568 | case DH_DDR3_SIZE_1GIB: |
| 569 | mx6_dram_cfg(&dhcom_ddr_32bit, |
| 570 | &dhcom_mmdc_calib_2x4g_800, |
| 571 | &dhcom_mem_ddr_4g); |
| 572 | break; |
| 573 | } |
| 574 | |
| 575 | /* Perform DDR DRAM calibration */ |
Ludwig Zenz | 11952f8 | 2019-04-15 11:13:08 +0200 | [diff] [blame] | 576 | spl_dram_perform_cal(&dhcom_ddr_32bit); |
Ludwig Zenz | 1b35d90 | 2018-07-05 09:23:48 +0200 | [diff] [blame] | 577 | } |
| 578 | } |
| 579 | |
Marek Vasut | 00671d9 | 2017-10-09 21:51:10 +0200 | [diff] [blame] | 580 | void board_init_f(ulong dummy) |
| 581 | { |
| 582 | /* setup AIPS and disable watchdog */ |
| 583 | arch_cpu_init(); |
| 584 | |
| 585 | ccgr_init(); |
| 586 | gpr_init(); |
| 587 | |
| 588 | /* setup GP timer */ |
| 589 | timer_init(); |
| 590 | |
| 591 | setup_iomux_boardid(); |
Ludwig Zenz | 63fa845 | 2018-07-05 09:23:47 +0200 | [diff] [blame] | 592 | setup_iomux_ddrcode(); |
Marek Vasut | 00671d9 | 2017-10-09 21:51:10 +0200 | [diff] [blame] | 593 | setup_iomux_gpio(); |
| 594 | setup_iomux_enet(); |
| 595 | setup_iomux_sd(); |
| 596 | setup_iomux_spi(); |
| 597 | setup_iomux_uart(); |
| 598 | setup_iomux_usb(); |
| 599 | |
| 600 | /* UART clocks enabled and gd valid - init serial console */ |
| 601 | preloader_console_init(); |
| 602 | |
Ludwig Zenz | 1b35d90 | 2018-07-05 09:23:48 +0200 | [diff] [blame] | 603 | /* DDR3 initialization */ |
| 604 | dhcom_spl_dram_init(); |
Ludwig Zenz | e6d347f | 2018-07-05 09:23:46 +0200 | [diff] [blame] | 605 | |
Marek Vasut | 00671d9 | 2017-10-09 21:51:10 +0200 | [diff] [blame] | 606 | /* Clear the BSS. */ |
| 607 | memset(__bss_start, 0, __bss_end - __bss_start); |
| 608 | |
| 609 | /* load/boot image from boot device */ |
| 610 | board_init_r(NULL, 0); |
| 611 | } |