Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / bd758d439fdcbb7d118ae0efc1b14bc18f182517 / . / drivers / mmc / Kconfig
blob: f799f70e43acddcdfbc174b05e5dc9e8431065fe [file] [log] [blame]
Nobuhiro Iwamatsu3ec5f862014-12-17 08:03:00 +0900[diff] [blame]1menu "MMC Host controller Support"
2
Maxime Ripard4f780742015-10-15 22:04:05 +0200[diff] [blame]3config MMC
Masahiro Yamadaa5ed4be2016-12-07 22:10:26 +0900[diff] [blame]4 bool "MMC/SD/SDIO card support"
5 default ARM || PPC || SANDBOX
Tom Rini9b384002021-04-21 15:32:27 -0400[diff] [blame]6 select DM_MMC if DM
Maxime Ripard4f780742015-10-15 22:04:05 +0200[diff] [blame]7 help
Masahiro Yamadaa5ed4be2016-12-07 22:10:26 +0900[diff] [blame]8 This selects MultiMediaCard, Secure Digital and Secure
9 Digital I/O support.
10
11 If you want MMC/SD/SDIO support, you should say Y here and
12 also to your specific host controller driver.
Maxime Ripard4f780742015-10-15 22:04:05 +0200[diff] [blame]13
Jean-Jacques Hiblotd0531672018-01-04 15:23:32 +0100[diff] [blame]14config MMC_WRITE
15 bool "support for MMC/SD write operations"
16 depends on MMC
17 default y
18 help
19 Enable write access to MMC and SD Cards
20
Jaehoon Chung48ad8272021-02-16 10:16:52 +0900[diff] [blame]21config MMC_PWRSEQ
22 bool "HW reset support for eMMC"
23 depends on PWRSEQ
24 help
25 Ths select Hardware reset support aka pwrseq-emmc for eMMC
26 devices.
27
Jun Nieb4f4f6e2018-01-02 12:25:57 +0800[diff] [blame]28config MMC_BROKEN_CD
29 bool "Poll for broken card detection case"
30 help
31 If card detection feature is broken, just poll to detect.
32
Simon Glass1e8eb1b2015-06-23 15:38:48 -0600[diff] [blame]33config DM_MMC
34 bool "Enable MMC controllers using Driver Model"
35 depends on DM
Tom Rini9b384002021-04-21 15:32:27 -0400[diff] [blame]36 select BLK
Simon Glass1e8eb1b2015-06-23 15:38:48 -0600[diff] [blame]37 help
Robert P. J. Day8d56db92016-07-15 13:44:45 -0400[diff] [blame]38 This enables the MultiMediaCard (MMC) uclass which supports MMC and
Simon Glass1e8eb1b2015-06-23 15:38:48 -0600[diff] [blame]39 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
40 and non-removable (e.g. eMMC chip) devices are supported. These
41 appear as block devices in U-Boot and can support filesystems such
42 as EXT4 and FAT.
43
Simon Glass5f4bd8c2017-07-04 13:31:19 -0600[diff] [blame]44config SPL_DM_MMC
45 bool "Enable MMC controllers using Driver Model in SPL"
46 depends on SPL_DM && DM_MMC
Pali Rohár3c5ce032022-05-24 10:58:42 +0200[diff] [blame]47 default n if ARCH_MVEBU && !MVEBU_SPL_BOOT_DEVICE_MMC
Simon Glass5f4bd8c2017-07-04 13:31:19 -0600[diff] [blame]48 default y
49 help
50 This enables the MultiMediaCard (MMC) uclass which supports MMC and
51 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
52 and non-removable (e.g. eMMC chip) devices are supported. These
53 appear as block devices in U-Boot and can support filesystems such
54 as EXT4 and FAT.
55
Masahiro Yamadae8b99722016-12-07 22:10:27 +0900[diff] [blame]56if MMC
57
Michael Walle02016c62020-09-23 12:42:51 +0200[diff] [blame]58config MMC_SDHCI_ADMA_HELPERS
59 bool
60
Bhargav Shaha1afe252019-07-08 04:10:48 +0000[diff] [blame]61config MMC_SPI
62 bool "Support for SPI-based MMC controller"
63 depends on DM_MMC && DM_SPI
64 help
65 This selects SPI-based MMC controllers.
66 If you have an MMC controller on a SPI bus, say Y here.
67
68 If unsure, say N.
69
70config MMC_SPI_CRC_ON
71 bool "Support CRC for SPI-based MMC controller"
72 depends on MMC_SPI
73 default y
74 help
75 This enables CRC for SPI-based MMC controllers.
76
77 If unsure, say N.
78
Patrice Chotardfcce4202017-10-23 10:57:31 +0200[diff] [blame]79config ARM_PL180_MMCI
80 bool "ARM AMBA Multimedia Card Interface and compatible support"
Patrice Chotardfcce4202017-10-23 10:57:31 +0200[diff] [blame]81 help
82 This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
83 Interface (PL180, PL181 and compatible) support.
84 If you have an ARM(R) platform with a Multimedia Card slot,
85 say Y or M here.
86
Kishon Vijay Abraham I07baaa62017-09-21 16:30:10 +0200[diff] [blame]87config MMC_QUIRKS
88 bool "Enable quirks"
89 default y
90 help
91 Some cards and hosts may sometimes behave unexpectedly (quirks).
92 This option enable workarounds to handle those quirks. Some of them
Joel Johnson9cbee2c2020-01-11 09:08:15 -0700[diff] [blame]93 are enabled by default, other may require additional flags or are
Kishon Vijay Abraham I07baaa62017-09-21 16:30:10 +0200[diff] [blame]94 enabled by the host driver.
95
Jean-Jacques Hiblot1d7769a2017-11-30 17:44:02 +0100[diff] [blame]96config MMC_HW_PARTITIONING
97 bool "Support for HW partitioning command(eMMC)"
98 default y
99 help
100 This adds a command and an API to do hardware partitioning on eMMC
101 devices.
102
Alex Kiernan60e0f612018-05-08 04:43:31 +0000[diff] [blame]103config SUPPORT_EMMC_RPMB
104 bool "Support eMMC replay protected memory block (RPMB)"
105 imply CMD_MMC_RPMB
106 help
107 Enable support for reading, writing and programming the
108 key for the Replay Protection Memory Block partition in eMMC.
109
Alex Kiernan00848772019-05-01 07:58:27 +0000[diff] [blame]110config SUPPORT_EMMC_BOOT
111 bool "Support some additional features of the eMMC boot partitions"
112 help
113 Enable support for eMMC boot partitions. This also enables
114 extensions within the mmc command.
115
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]116config MMC_IO_VOLTAGE
117 bool "Support IO voltage configuration"
118 help
119 IO voltage configuration allows selecting the voltage level of the IO
120 lines (not the level of main supply). This is required for UHS
121 support. For eMMC this not mandatory, but not enabling this option may
122 prevent the driver of using the faster modes.
123
124config SPL_MMC_IO_VOLTAGE
125 bool "Support IO voltage configuration in SPL"
Tom Rini0a83cc22022-06-10 23:03:09 -0400[diff] [blame]126 depends on SPL_MMC
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]127 help
128 IO voltage configuration allows selecting the voltage level of the IO
129 lines (not the level of main supply). This is required for UHS
130 support. For eMMC this not mandatory, but not enabling this option may
131 prevent the driver of using the faster modes.
132
133config MMC_UHS_SUPPORT
134 bool "enable UHS support"
135 depends on MMC_IO_VOLTAGE
136 help
137 The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
138 cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
139 frequency can go up to 208MHz (SDR104)
140
141config SPL_MMC_UHS_SUPPORT
142 bool "enable UHS support in SPL"
143 depends on SPL_MMC_IO_VOLTAGE
144 help
145 The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
146 cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
147 frequency can go up to 208MHz (SDR104)
148
Peng Faneede83b2019-07-10 14:43:07 +0800[diff] [blame]149config MMC_HS400_ES_SUPPORT
150 bool "enable HS400 Enhanced Strobe support"
151 help
152 The HS400 Enhanced Strobe mode is support by some eMMC. The bus
153 frequency is up to 200MHz. This mode does not tune the IO.
154
155config SPL_MMC_HS400_ES_SUPPORT
156 bool "enable HS400 Enhanced Strobe support in SPL"
Tom Rini0a83cc22022-06-10 23:03:09 -0400[diff] [blame]157 depends on SPL_MMC
Peng Faneede83b2019-07-10 14:43:07 +0800[diff] [blame]158 help
159 The HS400 Enhanced Strobe mode is support by some eMMC. The bus
160 frequency is up to 200MHz. This mode does not tune the IO.
161
Peng Fan46801252018-08-10 14:07:54 +0800[diff] [blame]162config MMC_HS400_SUPPORT
163 bool "enable HS400 support"
164 select MMC_HS200_SUPPORT
165 help
166 The HS400 mode is support by some eMMC. The bus frequency is up to
167 200MHz. This mode requires tuning the IO.
168
169config SPL_MMC_HS400_SUPPORT
170 bool "enable HS400 support in SPL"
Tom Rini0a83cc22022-06-10 23:03:09 -0400[diff] [blame]171 depends on SPL_MMC
Faiz Abbas373954e2019-08-01 16:33:36 +0530[diff] [blame]172 select SPL_MMC_HS200_SUPPORT
Peng Fan46801252018-08-10 14:07:54 +0800[diff] [blame]173 help
174 The HS400 mode is support by some eMMC. The bus frequency is up to
175 200MHz. This mode requires tuning the IO.
176
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]177config MMC_HS200_SUPPORT
178 bool "enable HS200 support"
179 help
180 The HS200 mode is support by some eMMC. The bus frequency is up to
181 200MHz. This mode requires tuning the IO.
182
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]183config SPL_MMC_HS200_SUPPORT
184 bool "enable HS200 support in SPL"
Tom Rini0a83cc22022-06-10 23:03:09 -0400[diff] [blame]185 depends on SPL_MMC
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]186 help
187 The HS200 mode is support by some eMMC. The bus frequency is up to
188 200MHz. This mode requires tuning the IO.
189
Jean-Jacques Hiblota94fb412017-09-21 16:29:53 +0200[diff] [blame]190config MMC_VERBOSE
191 bool "Output more information about the MMC"
192 default y
193 help
194 Enable the output of more information about the card such as the
195 operating mode.
196
Jaehoon Chunge2bf5802018-01-26 19:25:31 +0900[diff] [blame]197config MMC_TRACE
198 bool "MMC debugging"
Jaehoon Chunge2bf5802018-01-26 19:25:31 +0900[diff] [blame]199 help
200 This is an option for use by developer. Enable MMC core debugging.
201
202 If you need to see the MMC core message, say Y.
203
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]204config MMC_DAVINCI
205 bool "TI DAVINCI Multimedia Card Interface support"
206 depends on ARCH_DAVINCI
207 default y
208 help
209 This selects the TI DAVINCI Multimedia card Interface.
210 If you have an DAVINCI board with a Multimedia Card slot,
211 say Y here. If unsure, say N.
212
Masahiro Yamada7942e912017-01-10 13:32:04 +0900[diff] [blame]213config MMC_DW
214 bool "Synopsys DesignWare Memory Card Interface"
Philipp Tomsichb3027472018-11-30 22:13:25 +0100[diff] [blame]215 select BOUNCE_BUFFER
Masahiro Yamada7942e912017-01-10 13:32:04 +0900[diff] [blame]216 help
217 This selects support for the Synopsys DesignWare Mobile Storage IP
218 block, this provides host support for SD and MMC interfaces, in both
219 PIO, internal DMA mode and external DMA mode.
220
Arthur Li055e18e2020-02-20 18:19:35 -0800[diff] [blame]221config MMC_DW_CORTINA
222 bool "Cortina specific extensions for Synopsys DW Memory Card Interface"
223 depends on DM_MMC
224 depends on MMC_DW
225 depends on BLK
Arthur Li055e18e2020-02-20 18:19:35 -0800[diff] [blame]226 help
227 This selects support for Cortina SoC specific extensions to the
228 Synopsys DesignWare Memory Card Interface driver. Select this option
229 for platforms based on Cortina CAxxxx Soc's.
230
Masahiro Yamadaf1ad7282017-01-10 13:32:05 +0900[diff] [blame]231config MMC_DW_EXYNOS
232 bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
233 depends on ARCH_EXYNOS
234 depends on MMC_DW
235 default y
236 help
237 This selects support for Samsung Exynos SoC specific extensions to the
238 Synopsys DesignWare Memory Card Interface driver. Select this option
239 for platforms based on Exynos4 and Exynos5 SoC's.
240
241config MMC_DW_K3
242 bool "K3 specific extensions for Synopsys DW Memory Card Interface"
243 depends on MMC_DW
244 help
245 This selects support for Hisilicon K3 SoC specific extensions to the
246 Synopsys DesignWare Memory Card Interface driver. Select this option
247 for platforms based on Hisilicon K3 SoC's.
248
Masahiro Yamadadc607f82017-01-10 13:32:03 +0900[diff] [blame]249config MMC_DW_ROCKCHIP
Simon Glass4ecaa6d2015-08-30 16:55:37 -0600[diff] [blame]250 bool "Rockchip SD/MMC controller support"
251 depends on DM_MMC && OF_CONTROL
Masahiro Yamada7942e912017-01-10 13:32:04 +0900[diff] [blame]252 depends on MMC_DW
Simon Glass4ecaa6d2015-08-30 16:55:37 -0600[diff] [blame]253 help
254 This enables support for the Rockchip SD/MMM controller, which is
255 based on Designware IP. The device is compatible with at least
256 SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
257 as removeable SD and micro-SD cards.
258
Masahiro Yamadaf1ad7282017-01-10 13:32:05 +0900[diff] [blame]259config MMC_DW_SOCFPGA
260 bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
261 depends on ARCH_SOCFPGA
262 depends on MMC_DW
263 default y
264 help
265 This selects support for Altera SOCFPGA specific extensions to the
266 Synopsys DesignWare Memory Card Interface driver. Select this option
267 for platforms based on Altera SOCFPGA.
268
Eugeniy Paltsevb050c2c2019-02-25 18:35:28 +0300[diff] [blame]269config MMC_DW_SNPS
270 bool "Extensions for DW Memory Card Interface used in Synopsys ARC devboards"
271 depends on MMC_DW
272 depends on DM_MMC
273 depends on OF_CONTROL
274 depends on CLK
275 help
276 This selects support for Synopsys DesignWare Memory Card Interface driver
277 extensions used in various Synopsys ARC devboards.
278
Stefan Bosch22c12f72020-07-10 19:07:29 +0200[diff] [blame]279config NEXELL_DWMMC
280 bool "Nexell SD/MMC controller support"
281 depends on ARCH_NEXELL
282 depends on MMC_DW
283 depends on DM_MMC
284 depends on PINCTRL_NEXELL
285 default y
286
Carlo Caione20cab782017-04-12 20:30:42 +0200[diff] [blame]287config MMC_MESON_GX
288 bool "Meson GX EMMC controller support"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]289 depends on DM_MMC && BLK && ARCH_MESON
Carlo Caione20cab782017-04-12 20:30:42 +0200[diff] [blame]290 help
291 Support for EMMC host controller on Meson GX ARM SoCs platform (S905)
292
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]293config MMC_MXC
294 bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
295 help
296 This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
297 Multimedia Card Interface. If you have an i.MX or MPC512x platform
298 with a Multimedia Card slot, say Y here.
299
300 If unsure, say N.
301
Amit Singh Tomar347494c2021-11-28 17:02:24 +0530[diff] [blame]302config MMC_OWL
303 bool "Actions OWL Multimedia Card Interface support"
304 depends on ARCH_OWL && DM_MMC && BLK
305 help
306 This selects the OWL SD/MMC host controller found on board
307 based on Actions S700/S900 SoC.
308
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]309config MMC_MXS
310 bool "Freescale MXS Multimedia Card Interface support"
Adam Forda456d562018-02-06 08:34:45 -0600[diff] [blame]311 depends on MX23 || MX28 || MX6 || MX7
Philipp Tomsichb3027472018-11-30 22:13:25 +0100[diff] [blame]312 select BOUNCE_BUFFER
Adam Forda456d562018-02-06 08:34:45 -0600[diff] [blame]313 select APBH_DMA
314 select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7
315 select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]316 help
317 This selects the Freescale SSP MMC controller found on MXS based
318 platforms like mx23/28.
319
320 If unsure, say N.
321
Felipe Balbiecf7dfd2017-02-20 14:24:13 +0300[diff] [blame]322config MMC_PCI
323 bool "Support for MMC controllers on PCI"
Bin Meng3d81f022021-02-15 20:01:44 +0800[diff] [blame]324 depends on MMC_SDHCI
Felipe Balbiecf7dfd2017-02-20 14:24:13 +0300[diff] [blame]325 help
326 This selects PCI-based MMC controllers.
327 If you have an MMC controller on a PCI bus, say Y here.
328
Suneel Garapati40e61332019-10-19 18:03:01 -0700[diff] [blame]329config MMC_OCTEONTX
Stefan Roesee06f5522021-03-12 09:48:25 +0100[diff] [blame]330 bool "Marvell Octeon Multimedia Card Interface support"
331 depends on (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2)
Suneel Garapati40e61332019-10-19 18:03:01 -0700[diff] [blame]332 depends on DM_MMC
333 help
Stefan Roesee06f5522021-03-12 09:48:25 +0100[diff] [blame]334 This selects the Octeon Multimedia card Interface.
335 If you have an OcteonTX/TX2 or MIPS Octeon board with a
336 Multimedia Card slot, say Y here.
Suneel Garapati40e61332019-10-19 18:03:01 -0700[diff] [blame]337
Felipe Balbiecf7dfd2017-02-20 14:24:13 +0300[diff] [blame]338 If unsure, say N.
339
Harm Berntsen7b9e5af2021-03-30 10:19:41 +0200[diff] [blame]340config MVEBU_MMC
341 bool "Kirkwood MMC controller support"
342 depends on DM_MMC && BLK && ARCH_KIRKWOOD
343 help
344 Support for MMC host controller on Kirkwood SoCs.
345 If you are on a Kirkwood architecture, say Y here.
346
347 If unsure, say N.
348
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]349config MMC_OMAP_HS
350 bool "TI OMAP High Speed Multimedia Card Interface support"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]351 select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
Jean-Jacques Hiblot4612bdd2017-09-21 17:03:10 +0200[diff] [blame]352 select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]353 help
354 This selects the TI OMAP High Speed Multimedia card Interface.
355 If you have an omap2plus board with a Multimedia Card slot,
356 say Y here.
357
358 If unsure, say N.
359
Jean-Jacques Hiblotcebf0592018-02-23 10:40:18 +0100[diff] [blame]360config MMC_OMAP_HS_ADMA
361 bool "ADMA support for OMAP HS MMC"
362 depends on MMC_OMAP_HS && !OMAP34XX
363 default y if !AM33XX
364 help
365 This enables support for the ADMA2 controller (SDA3.00 Part A2 DMA
366 controller). If supported by the hardware, selecting this option will
367 increase performances.
368
Adam Fordef354962017-02-06 11:31:43 -0600[diff] [blame]369config MMC_OMAP36XX_PINS
370 bool "Enable MMC1 on OMAP36xx/37xx"
371 depends on OMAP34XX && MMC_OMAP_HS
372 help
373 This enables extended-drain in the MMC/SD/SDIO1I/O and
374 GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129)
375 specific to the OMAP36xx/37xx using MMC1
376
377 If you have a controller with this interface, say Y here.
378
379 If unsure, say N.
380
Nobuhiro Iwamatsu3ec5f862014-12-17 08:03:00 +0900[diff] [blame]381config SH_SDHI
382 bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
Marek Vasut1c5a5a92017-05-13 15:51:14 +0200[diff] [blame]383 depends on ARCH_RMOBILE
Nobuhiro Iwamatsu3ec5f862014-12-17 08:03:00 +0900[diff] [blame]384 help
385 Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
386
Marek Vasuta8624ac2018-04-21 17:40:20 +0200[diff] [blame]387config SH_MMCIF
388 bool "SuperH/Renesas ARM SoCs on-chip MMCIF host controller support"
389 depends on ARCH_RMOBILE || SH
390 help
391 Support for the on-chip MMCIF host controller on SuperH/Renesas ARM SoCs platform
392
Masahiro Yamadaa0cfcc02016-02-18 19:52:48 +0900[diff] [blame]393config MMC_UNIPHIER
Marek Vasut2883f742017-09-23 13:30:30 +0200[diff] [blame]394 bool "UniPhier SD/MMC Host Controller support"
395 depends on ARCH_UNIPHIER
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]396 depends on BLK && DM_MMC
Masahiro Yamadac2326532016-12-30 23:20:14 +0900[diff] [blame]397 depends on OF_CONTROL
Masahiro Yamadaa0cfcc02016-02-18 19:52:48 +0900[diff] [blame]398 help
Marek Vasut847ee0c2017-07-21 23:24:36 +0200[diff] [blame]399 This selects support for the Matsushita SD/MMC Host Controller on
Marek Vasut2883f742017-09-23 13:30:30 +0200[diff] [blame]400 SocioNext UniPhier SoCs.
401
402config RENESAS_SDHI
403 bool "Renesas R-Car SD/MMC Host Controller support"
404 depends on ARCH_RMOBILE
405 depends on BLK && DM_MMC
406 depends on OF_CONTROL
Marek Vasut9f7baeb2020-04-04 12:45:04 +0200[diff] [blame]407 select BOUNCE_BUFFER
Marek Vasut2883f742017-09-23 13:30:30 +0200[diff] [blame]408 help
409 This selects support for the Matsushita SD/MMC Host Controller on
410 Renesas R-Car SoCs.
Masahiro Yamadaa0cfcc02016-02-18 19:52:48 +0900[diff] [blame]411
Alexander Graf044725f2018-01-23 18:05:22 +0100[diff] [blame]412config MMC_BCM2835
413 bool "BCM2835 family custom SD/MMC Host Controller support"
414 depends on ARCH_BCM283X
415 depends on BLK && DM_MMC
416 depends on OF_CONTROL
417 default y
418 help
419 This selects support for the custom SD host controller in the BCM2835
420 family of devices.
421
422 If you have a BCM2835 platform with SD or MMC devices, say Y here.
423
424 If unsure, say N.
425
Paul Burton8e142842018-12-16 19:25:20 -0300[diff] [blame]426config JZ47XX_MMC
427 bool "Ingenic JZ47xx SD/MMC Host Controller support"
428 depends on ARCH_JZ47XX
429 help
430 This selects support for the SD Card Controller on Ingenic JZ47xx SoCs.
431
Masahiro Yamada54f7cfc2017-01-30 19:46:50 +0900[diff] [blame]432config MMC_SANDBOX
Simon Glassf9eebac2016-05-01 13:52:42 -0600[diff] [blame]433 bool "Sandbox MMC support"
Masahiro Yamada54f7cfc2017-01-30 19:46:50 +0900[diff] [blame]434 depends on SANDBOX
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]435 depends on BLK && DM_MMC && OF_CONTROL
Simon Glassf9eebac2016-05-01 13:52:42 -0600[diff] [blame]436 help
437 This select a dummy sandbox MMC driver. At present this does nothing
438 other than allow sandbox to be build with MMC support. This
439 improves build coverage for sandbox and makes it easier to detect
440 MMC build errors with sandbox.
441
Masahiro Yamada7db8c172016-12-07 22:10:28 +0900[diff] [blame]442config MMC_SDHCI
443 bool "Secure Digital Host Controller Interface support"
444 help
445 This selects the generic Secure Digital Host Controller Interface.
446 It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
447 and Toshiba(R). Most controllers found in laptops are of this type.
448
449 If you have a controller with this interface, say Y here.
450
451 If unsure, say N.
452
Masahiro Yamadabfd110f2016-12-07 22:10:30 +0900[diff] [blame]453config MMC_SDHCI_IO_ACCESSORS
454 bool
455 depends on MMC_SDHCI
456 help
457 This is silent Kconfig symbol that is selected by the drivers that
458 need to overwrite SDHCI IO memory accessors.
459
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]460config MMC_SDHCI_SDMA
461 bool "Support SDHCI SDMA"
462 depends on MMC_SDHCI
463 help
464 This enables support for the SDMA (Single Operation DMA) defined
465 in the SD Host Controller Standard Specification Version 1.00 .
466
Faiz Abbas4c082a62019-04-16 23:06:58 +0530[diff] [blame]467config MMC_SDHCI_ADMA
468 bool "Support SDHCI ADMA2"
469 depends on MMC_SDHCI
Michael Walle02016c62020-09-23 12:42:51 +0200[diff] [blame]470 select MMC_SDHCI_ADMA_HELPERS
Faiz Abbas4c082a62019-04-16 23:06:58 +0530[diff] [blame]471 help
472 This enables support for the ADMA (Advanced DMA) defined
473 in the SD Host Controller Standard Specification Version 3.00
474
475config SPL_MMC_SDHCI_ADMA
476 bool "Support SDHCI ADMA2 in SPL"
Tom Rini0a83cc22022-06-10 23:03:09 -0400[diff] [blame]477 depends on SPL_MMC && MMC_SDHCI
Michael Walle02016c62020-09-23 12:42:51 +0200[diff] [blame]478 select MMC_SDHCI_ADMA_HELPERS
Faiz Abbas4c082a62019-04-16 23:06:58 +0530[diff] [blame]479 help
480 This enables support for the ADMA (Advanced DMA) defined
481 in the SD Host Controller Standard Specification Version 3.00 in SPL.
482
Chris Packham7d5d5912022-05-29 11:13:17 +1200[diff] [blame]483config FIXED_SDHCI_ALIGNED_BUFFER
484 hex "SDRAM address for fixed buffer"
485 depends on SPL && MVEBU_SPL_BOOT_DEVICE_MMC
486 default 0x00180000
487 help
488 On the Marvell Armada 38x when the SPL runs it located in internal
489 SRAM which is the L2 cache locked to memory. When the MMC buffers
490 are located on the stack (or bss), the SDIO controller (SDHCI) can't
491 write into this L2 cache memory.
492
493 This specifies the address of a fixed buffer located in SDRAM that
494 will be used for all SDHCI transfers in the SPL.
495
Eddie Jamesc8a65812019-08-27 09:48:03 -0500[diff] [blame]496config MMC_SDHCI_ASPEED
497 bool "Aspeed SDHCI controller"
498 depends on ARCH_ASPEED
499 depends on DM_MMC
500 depends on MMC_SDHCI
Joel Stanley818a6b52022-06-23 18:35:34 +0930[diff] [blame]501 select MISC
Eddie Jamesc8a65812019-08-27 09:48:03 -0500[diff] [blame]502 help
503 Enables support for the Aspeed SDHCI 2.0 controller present on Aspeed
504 SoCs. This device is compatible with SD 3.0 and/or MMC 4.3
505 specifications. On the AST2600, the device is also compatible with
506 MMC 5.1 and eMMC 3.0.
507
Masahiro Yamada8c1a1322017-01-30 19:46:55 +0900[diff] [blame]508config MMC_SDHCI_ATMEL
509 bool "Atmel SDHCI controller support"
510 depends on ARCH_AT91
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]511 depends on DM_MMC && BLK && ARCH_AT91
Masahiro Yamada8c1a1322017-01-30 19:46:55 +0900[diff] [blame]512 depends on MMC_SDHCI
513 help
514 This enables support for the Atmel SDHCI controller, which supports
515 the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
516 Memory Card Specification V3.0, and the SDIO V3.0 specification.
517 It is compliant with the SD Host Controller Standard V3.0
518 specification.
519
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]520config MMC_SDHCI_BCM2835
521 tristate "SDHCI support for the BCM2835 SD/MMC Controller"
522 depends on ARCH_BCM283X
523 depends on MMC_SDHCI
Masahiro Yamadabfd110f2016-12-07 22:10:30 +0900[diff] [blame]524 select MMC_SDHCI_IO_ACCESSORS
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]525 help
526 This selects the BCM2835 SD/MMC controller.
527
528 If you have a BCM2835 platform with SD or MMC devices,
529 say Y here.
530
531 If unsure, say N.
532
Thomas Fitzsimmons919646d2018-06-08 17:59:45 -0400[diff] [blame]533config MMC_SDHCI_BCMSTB
534 tristate "SDHCI support for the BCMSTB SD/MMC Controller"
535 depends on MMC_SDHCI
536 help
537 This selects the Broadcom set-top box SD/MMC controller.
538
539 If you have a BCMSTB platform with SD or MMC devices,
540 say Y here.
541
542 If unsure, say N.
543
Masahiro Yamadadcbc4432016-12-30 22:41:46 +0900[diff] [blame]544config MMC_SDHCI_CADENCE
545 bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]546 depends on BLK && DM_MMC
Masahiro Yamadadcbc4432016-12-30 22:41:46 +0900[diff] [blame]547 depends on MMC_SDHCI
548 depends on OF_CONTROL
549 help
550 This selects the Cadence SD/SDIO/eMMC driver.
551
552 If you have a controller with this interface, say Y here.
553
554 If unsure, say N.
555
Faiz Abbasd8fb3092019-06-11 00:43:31 +0530[diff] [blame]556config MMC_SDHCI_AM654
557 bool "SDHCI Controller on TI's Am654 devices"
Lokesh Vutlabc9979f2018-08-27 15:57:54 +0530[diff] [blame]558 depends on ARCH_K3
559 depends on MMC_SDHCI
560 depends on DM_MMC && OF_CONTROL && BLK
Faiz Abbase9aed582019-06-11 00:43:38 +0530[diff] [blame]561 depends on REGMAP
Faiz Abbas36c8c5c2021-02-04 15:10:54 +0530[diff] [blame]562 select MMC_SDHCI_IO_ACCESSORS
Lokesh Vutlabc9979f2018-08-27 15:57:54 +0530[diff] [blame]563 help
Faiz Abbasd8fb3092019-06-11 00:43:31 +0530[diff] [blame]564 Support for Secure Digital Host Controller Interface (SDHCI)
565 controllers present on TI's AM654 SOCs.
Lokesh Vutlabc9979f2018-08-27 15:57:54 +0530[diff] [blame]566
Arun Parameswaran2f4f34a2019-09-12 11:06:08 -0700[diff] [blame]567config MMC_SDHCI_IPROC
568 bool "SDHCI support for the iProc SD/MMC Controller"
569 depends on MMC_SDHCI
570 help
571 This selects the iProc SD/MMC controller.
572
573 If you have a Broadcom IPROC platform with SD or MMC devices,
574 say Y or M here.
575
576 If unsure, say N.
577
Jassi Brar8188bda2021-06-04 18:44:16 +0900[diff] [blame]578config MMC_SDHCI_F_SDH30
579 bool "SDHCI support for Fujitsu Semiconductor F_SDH30"
580 depends on BLK && DM_MMC
581 depends on MMC_SDHCI
582 help
583 This selects the Secure Digital Host Controller Interface (SDHCI)
584 Needed by some Fujitsu SoC for MMC / SD / SDIO support.
585 If you have a controller with this interface, say Y or M here.
586 If unsure, say N.
587
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]588config MMC_SDHCI_KONA
589 bool "SDHCI support on Broadcom KONA platform"
590 depends on MMC_SDHCI
591 help
592 This selects the Broadcom Kona Secure Digital Host Controller
593 Interface(SDHCI) support.
594 This is used in Broadcom mobile SoCs.
595
596 If you have a controller with this interface, say Y here.
597
Masahiro Yamadaa1262eb2017-01-30 19:46:53 +0900[diff] [blame]598config MMC_SDHCI_MSM
599 bool "Qualcomm SDHCI controller"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]600 depends on BLK && DM_MMC
Masahiro Yamadaa1262eb2017-01-30 19:46:53 +0900[diff] [blame]601 depends on MMC_SDHCI
602 help
603 Enables support for SDHCI 2.0 controller present on some Qualcomm
604 Snapdragon devices. This device is compatible with eMMC v4.5 and
605 SD 3.0 specifications. Both SD and eMMC devices are supported.
606 Card-detect gpios are not supported.
607
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]608config MMC_SDHCI_MV
609 bool "SDHCI support on Marvell platform"
610 depends on ARCH_MVEBU
611 depends on MMC_SDHCI
612 help
613 This selects the Secure Digital Host Controller Interface on
614 Marvell platform.
615
616 If you have a controller with this interface, say Y here.
617
618 If unsure, say N.
619
Jim Liu29cf22c2022-05-24 16:55:33 +0800[diff] [blame]620config MMC_SDHCI_NPCM
621 bool "SDHCI support on Nuvoton NPCM device"
622 depends on MMC_SDHCI
623 depends on DM_MMC
624 help
625 This selects the Secure Digital Host Controller Interface (SDHCI)
626 on Nuvoton NPCM device.
627
628 If you have a controller with this interface, say Y here.
629
630 If unsure, say N.
631
Masahiro Yamadaf79df032017-01-30 19:46:54 +0900[diff] [blame]632config MMC_SDHCI_PIC32
633 bool "Microchip PIC32 on-chip SDHCI support"
634 depends on DM_MMC && MACH_PIC32
635 depends on MMC_SDHCI
636 help
637 Support for Microchip PIC32 SDHCI controller.
638
Masahiro Yamadababe0262017-01-30 19:46:52 +0900[diff] [blame]639config MMC_SDHCI_ROCKCHIP
640 bool "Arasan SDHCI controller for Rockchip support"
641 depends on ARCH_ROCKCHIP
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]642 depends on DM_MMC && BLK
Masahiro Yamadababe0262017-01-30 19:46:52 +0900[diff] [blame]643 depends on MMC_SDHCI
644 help
645 Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
646
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]647config MMC_SDHCI_S5P
648 bool "SDHCI support on Samsung S5P SoC"
649 depends on MMC_SDHCI
650 help
651 This selects the Secure Digital Host Controller Interface (SDHCI)
652 on Samsung S5P SoCs.
653
654 If you have a controller with this interface, say Y here.
655
656 If unsure, say N.
657
658config MMC_SDHCI_SPEAR
659 bool "SDHCI support on ST SPEAr platform"
660 depends on MMC_SDHCI
661 help
662 This selects the Secure Digital Host Controller Interface (SDHCI)
663 often referrered to as the HSMMC block in some of the ST SPEAR range
664 of SoC
665
666 If you have a controller with this interface, say Y here.
667
668 If unsure, say N.
669
Patrice Chotard2eea7d82017-02-21 13:37:09 +0100[diff] [blame]670config MMC_SDHCI_STI
671 bool "SDHCI support for STMicroelectronics SoC"
Patrice Chotardcdf6b572017-02-21 13:37:11 +0100[diff] [blame]672 depends on MMC_SDHCI && OF_CONTROL
Patrice Chotard2eea7d82017-02-21 13:37:09 +0100[diff] [blame]673 help
674 This selects the Secure Digital Host Controller Interface (SDHCI)
675 on STMicroelectronics STiH410 SoC.
676
Stefan Roese121fc562016-12-09 15:03:28 +0100[diff] [blame]677config MMC_SDHCI_XENON
678 bool "SDHCI support for the Xenon SDHCI controller"
679 depends on MMC_SDHCI && DM_MMC && OF_CONTROL
680 help
681 Support for Xenon SDHCI host controller on Marvell Armada 3700
682 7k/8k ARM SoCs platforms
683
684 If you have a controller with this interface, say Y here.
685
686 If unsure, say N.
687
Felipe Balbib7567602017-02-20 14:24:14 +0300[diff] [blame]688config MMC_SDHCI_TANGIER
689 bool "Tangier SDHCI controller support"
690 depends on DM_MMC && BLK
691 depends on MMC_SDHCI
692 help
693 This selects support for SDHCI controller on Tanginer
694 SoC. Note that this controller does not sit on PCI bus and,
695 hence, cannot be enumerated by standard PCI means.
696
697 If you're using an Intel Tangier SoC (available on Intel
698 Edison board), say Y here.
699
700 If unsure, say N.
701
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]702config MMC_SDHCI_TEGRA
703 bool "SDHCI platform support for the Tegra SD/MMC Controller"
Trevor Woerner513f6402020-05-06 08:02:41 -0400[diff] [blame]704 depends on ARCH_TEGRA
Philipp Tomsichb3027472018-11-30 22:13:25 +0100[diff] [blame]705 select BOUNCE_BUFFER
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]706 default y
707 help
708 This selects the Tegra SD/MMC controller. If you have a Tegra
709 platform with SD or MMC devices, say Y here.
710
711 If unsure, say N.
712
Trent Piepho1bf56c32019-04-01 23:05:49 +0000[diff] [blame]713config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
714 bool "Disable external clock loopback"
715 depends on MMC_SDHCI_TEGRA && TEGRA124
716 help
717 Disable the external clock loopback and use the internal one on SDMMC3
718 as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits
719 being set to 0xfffd according to the TRM.
720
721 TODO(marcel.ziswiler@toradex.com): Move to device tree controlled
722 approach once proper kernel integration made it mainline.
723
Masahiro Yamada168c57d2017-01-30 19:46:51 +0900[diff] [blame]724config MMC_SDHCI_ZYNQ
725 bool "Arasan SDHCI controller support"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]726 depends on DM_MMC && OF_CONTROL && BLK
Masahiro Yamada168c57d2017-01-30 19:46:51 +0900[diff] [blame]727 depends on MMC_SDHCI
728 help
729 Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
730
Vipul Kumar62548002018-02-28 15:53:28 +0530[diff] [blame]731config ZYNQ_SDHCI_MAX_FREQ
732 int "Set the maximum frequency of the controller"
733 depends on MMC_SDHCI_ZYNQ
734 help
735 Set the maximum frequency of the controller.
736
Vipul Kumardcc14e32018-02-28 15:53:29 +0530[diff] [blame]737config ZYNQ_SDHCI_MIN_FREQ
738 int "Set the minimum frequency of the controller"
739 depends on MMC_SDHCI_ZYNQ
740 default 0
741 help
742 Set the minimum frequency of the controller.
743
Siva Durga Prasad Paladugua9a3d002019-05-27 14:33:14 +0530[diff] [blame]744config ZYNQ_HISPD_BROKEN
745 bool "High speed broken for Zynq SDHCI controller"
746 depends on MMC_SDHCI_ZYNQ
747 help
748 Set if high speed mode is broken.
749
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]750config MMC_SUNXI
751 bool "Allwinner sunxi SD/MMC Host Controller support"
Samuel Holland6b0d0bc2022-04-10 00:13:34 -0500[diff] [blame]752 depends on ARCH_SUNXI
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]753 default y
754 help
755 This selects support for the SD/MMC Host Controller on
756 Allwinner sunxi SoCs.
757
Maxime Ripard95e34702017-08-23 12:03:41 +0200[diff] [blame]758config MMC_SUNXI_HAS_NEW_MODE
759 bool
760 depends on MMC_SUNXI
761
Vasily Khoruzhickb198e2c2018-11-09 20:41:44 -0800[diff] [blame]762config MMC_SUNXI_HAS_MODE_SWITCH
763 bool
764 depends on MMC_SUNXI
765
Tianrui Wei8cfc7c52021-07-01 12:54:20 +0800[diff] [blame]766config MMC_PITON
767 bool "MMC support for OpenPiton SoC"
768 depends on DM_MMC && BLK
769 help
770 This selects support for the SD host controller on OpenPiton SoC.
771 Note that this SD controller directly exposes the contents of the
772 SD card as memory mapped, so there is no manual configuration
773 required
774
Wenyou Yang7a7a64c2017-04-13 10:29:22 +0800[diff] [blame]775config GENERIC_ATMEL_MCI
776 bool "Atmel Multimedia Card Interface support"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]777 depends on DM_MMC && BLK && ARCH_AT91
Wenyou Yang7a7a64c2017-04-13 10:29:22 +0800[diff] [blame]778 help
779 This enables support for Atmel High Speed Multimedia Card Interface
780 (HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3,
781 the SD Memory Card Specification V2.0, the SDIO V2.0 specification
782 and CE-ATA V1.1.
783
Patrice Chotardae19b812017-09-04 17:56:22 +0200[diff] [blame]784config STM32_SDMMC2
785 bool "STMicroelectronics STM32H7 SD/MMC Host Controller support"
Patrice Chotard4cb0ac92017-10-03 15:54:58 +0200[diff] [blame]786 depends on DM_MMC && BLK && OF_CONTROL
Patrice Chotardae19b812017-09-04 17:56:22 +0200[diff] [blame]787 help
788 This selects support for the SD/MMC controller on STM32H7 SoCs.
789 If you have a board based on such a SoC and with a SD/MMC slot,
790 say Y or M here.
791
Rick Chencbb52972017-11-14 14:47:09 +0800[diff] [blame]792config FTSDC010
793 bool "Ftsdc010 SD/MMC controller Support"
794 help
795 This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP.
796
Rick Chenc59a6fb2018-03-20 15:10:49 +0800[diff] [blame]797config FTSDC010_SDIO
798 bool "Support ftsdc010 sdio"
Rick Chenc59a6fb2018-03-20 15:10:49 +0800[diff] [blame]799 depends on FTSDC010
800 help
801 This can enable ftsdc010 sdio function.
802
developerdc5a9aa2018-11-15 10:08:04 +0800[diff] [blame]803config MMC_MTK
804 bool "MediaTek SD/MMC Card Interface support"
developer607faf72019-09-25 17:45:37 +0800[diff] [blame]805 depends on ARCH_MEDIATEK || ARCH_MTMIPS
developerdc5a9aa2018-11-15 10:08:04 +0800[diff] [blame]806 depends on BLK && DM_MMC
807 depends on OF_CONTROL
808 help
809 This selects the MediaTek(R) Secure digital and Multimedia card Interface.
810 If you have a machine with a integrated SD/MMC card reader, say Y or M here.
811 This is needed if support for any SD/SDIO/MMC devices is required.
812 If unsure, say N.
813
Masahiro Yamadae8b99722016-12-07 22:10:27 +0900[diff] [blame]814endif
815
Mario Six41d7d972018-03-28 14:38:19 +0200[diff] [blame]816config FSL_ESDHC
817 bool "Freescale/NXP eSDHC controller support"
818 help
Yangbo Lu982f4252019-06-21 11:42:27 +0800[diff] [blame]819 This selects support for the eSDHC (Enhanced Secure Digital Host
820 Controller) found on numerous Freescale/NXP SoCs.
821
Michael Walle081d4012020-10-12 10:07:14 +0200[diff] [blame]822config FSL_ESDHC_SUPPORT_ADMA2
823 bool "enable ADMA2 support"
824 depends on FSL_ESDHC
825 select MMC_SDHCI_ADMA_HELPERS
826 help
827 This enables support for the ADMA2 transfer mode. If supported by the
828 eSDHC it will allow 64bit DMA addresses.
829
Yangbo Luce884022020-05-19 11:06:44 +0800[diff] [blame]830config FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND
831 bool "enable eSDHC workaround for 3.3v IO reliability issue"
832 depends on FSL_ESDHC && DM_MMC
Yangbo Luce884022020-05-19 11:06:44 +0800[diff] [blame]833 help
834 When eSDHC operates at 3.3v, damage can accumulate in an internal
835 level shifter at a higher than expected rate. The faster the interface
836 runs, the more damage accumulates. This issue now is found on LX2160A
837 eSDHC1 for only SD card. The hardware workaround is recommended to use
838 an on-board level shifter that is 1.8v on SoC side and 3.3v on SD card
839 side. For boards without hardware workaround, this option could be
840 enabled, ensuring 1.8v IO voltage and disabling eSDHC if no card.
841 This option assumes no hotplug, and u-boot has to make all the way to
842 to linux to use 1.8v UHS-I speed mode if has card.
843
Yangbo Lue087cd62021-06-03 10:51:17 +0800[diff] [blame]844config FSL_ESDHC_VS33_NOT_SUPPORT
845 bool "3.3V power supply not supported"
846 depends on FSL_ESDHC
847 help
848 For eSDHC, power supply is through peripheral circuit. 3.3V support is
849 common. Select this if 3.3V power supply not supported.
850
Pali Rohár3a672d62022-05-11 20:27:13 +0200[diff] [blame]851config SYS_FSL_ESDHC_DEFAULT_BUS_WIDTH
852 int
853 depends on FSL_ESDHC
854 default 1
855
Tom Rinibdd47f32022-06-16 14:04:38 -0400[diff] [blame]856config ESDHC_DETECT_QUIRK
857 bool "QIXIS-based eSDHC quirk detection"
858 depends on FSL_ESDHC && FSL_QIXIS
859
Yangbo Lu982f4252019-06-21 11:42:27 +0800[diff] [blame]860config FSL_ESDHC_IMX
861 bool "Freescale/NXP i.MX eSDHC controller support"
862 help
863 This selects support for the i.MX eSDHC (Enhanced Secure Digital Host
864 Controller) found on numerous Freescale/NXP SoCs.
Mario Six41d7d972018-03-28 14:38:19 +0200[diff] [blame]865
Tom Rinidad332b2022-07-31 21:08:25 -0400[diff] [blame]866config SYS_FSL_ESDHC_HAS_DDR_MODE
867 bool "i.MX eSDHC controller supports DDR mode"
868 depends on FSL_ESDHC_IMX
869
Adam Ford01836582019-08-14 07:23:43 -0500[diff] [blame]870config FSL_USDHC
871 bool "Freescale/NXP i.MX uSDHC controller support"
Peng Fan29b31a52022-07-26 16:40:44 +0800[diff] [blame]872 depends on MX6 || MX7 ||ARCH_MX7ULP || IMX8 || IMX8M || IMX8ULP || IMX9 || IMXRT
Adam Ford01836582019-08-14 07:23:43 -0500[diff] [blame]873 select FSL_ESDHC_IMX
874 help
875 This enables the Ultra Secured Digital Host Controller enhancements
876
Nobuhiro Iwamatsu3ec5f862014-12-17 08:03:00 +0900[diff] [blame]877endmenu
York Sun097e3602016-12-28 08:43:42 -0800[diff] [blame]878
879config SYS_FSL_ERRATUM_ESDHC111
880 bool
881
882config SYS_FSL_ERRATUM_ESDHC13
883 bool
884
885config SYS_FSL_ERRATUM_ESDHC135
886 bool
887
888config SYS_FSL_ERRATUM_ESDHC_A001
889 bool
Michael Walle148dc612021-03-17 15:01:36 +0100[diff] [blame]890
891config SYS_FSL_ERRATUM_A011334
892 bool
Michael Walle7259dc52021-03-17 15:01:37 +0100[diff] [blame]893
894config SYS_FSL_ESDHC_UNRELIABLE_PULSE_DETECTION_WORKAROUND
895 bool