Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / bd303aac594b4071a16d24176a6d663dbd27f326 / . / drivers / mmc / Kconfig
blob: 59fb0fb50fb9f3e066843dbe27ee86579e0be069 [file] [log] [blame]
Nobuhiro Iwamatsu3ec5f862014-12-17 08:03:00 +0900[diff] [blame]1menu "MMC Host controller Support"
2
Maxime Ripard4f780742015-10-15 22:04:05 +0200[diff] [blame]3config MMC
Masahiro Yamadaa5ed4be2016-12-07 22:10:26 +0900[diff] [blame]4 bool "MMC/SD/SDIO card support"
5 default ARM || PPC || SANDBOX
Tom Rini9b384002021-04-21 15:32:27 -0400[diff] [blame]6 select DM_MMC if DM
Maxime Ripard4f780742015-10-15 22:04:05 +0200[diff] [blame]7 help
Masahiro Yamadaa5ed4be2016-12-07 22:10:26 +0900[diff] [blame]8 This selects MultiMediaCard, Secure Digital and Secure
9 Digital I/O support.
10
11 If you want MMC/SD/SDIO support, you should say Y here and
12 also to your specific host controller driver.
Maxime Ripard4f780742015-10-15 22:04:05 +0200[diff] [blame]13
Jean-Jacques Hiblotd0531672018-01-04 15:23:32 +0100[diff] [blame]14config MMC_WRITE
15 bool "support for MMC/SD write operations"
16 depends on MMC
17 default y
18 help
19 Enable write access to MMC and SD Cards
20
Jaehoon Chung48ad8272021-02-16 10:16:52 +0900[diff] [blame]21config MMC_PWRSEQ
22 bool "HW reset support for eMMC"
23 depends on PWRSEQ
24 help
25 Ths select Hardware reset support aka pwrseq-emmc for eMMC
26 devices.
27
Jun Nieb4f4f6e2018-01-02 12:25:57 +0800[diff] [blame]28config MMC_BROKEN_CD
29 bool "Poll for broken card detection case"
30 help
31 If card detection feature is broken, just poll to detect.
32
Simon Glass1e8eb1b2015-06-23 15:38:48 -0600[diff] [blame]33config DM_MMC
34 bool "Enable MMC controllers using Driver Model"
35 depends on DM
Tom Rini9b384002021-04-21 15:32:27 -0400[diff] [blame]36 select BLK
Simon Glass1e8eb1b2015-06-23 15:38:48 -0600[diff] [blame]37 help
Robert P. J. Day8d56db92016-07-15 13:44:45 -0400[diff] [blame]38 This enables the MultiMediaCard (MMC) uclass which supports MMC and
Simon Glass1e8eb1b2015-06-23 15:38:48 -0600[diff] [blame]39 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
40 and non-removable (e.g. eMMC chip) devices are supported. These
41 appear as block devices in U-Boot and can support filesystems such
42 as EXT4 and FAT.
43
Simon Glass5f4bd8c2017-07-04 13:31:19 -0600[diff] [blame]44config SPL_DM_MMC
45 bool "Enable MMC controllers using Driver Model in SPL"
46 depends on SPL_DM && DM_MMC
Pali Rohár3c5ce032022-05-24 10:58:42 +0200[diff] [blame]47 default n if ARCH_MVEBU && !MVEBU_SPL_BOOT_DEVICE_MMC
Simon Glass5f4bd8c2017-07-04 13:31:19 -0600[diff] [blame]48 default y
49 help
50 This enables the MultiMediaCard (MMC) uclass which supports MMC and
51 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
52 and non-removable (e.g. eMMC chip) devices are supported. These
53 appear as block devices in U-Boot and can support filesystems such
54 as EXT4 and FAT.
55
Masahiro Yamadae8b99722016-12-07 22:10:27 +0900[diff] [blame]56if MMC
57
Michael Walle02016c62020-09-23 12:42:51 +0200[diff] [blame]58config MMC_SDHCI_ADMA_HELPERS
59 bool
60
Bhargav Shaha1afe252019-07-08 04:10:48 +0000[diff] [blame]61config MMC_SPI
62 bool "Support for SPI-based MMC controller"
63 depends on DM_MMC && DM_SPI
64 help
65 This selects SPI-based MMC controllers.
66 If you have an MMC controller on a SPI bus, say Y here.
67
68 If unsure, say N.
69
70config MMC_SPI_CRC_ON
71 bool "Support CRC for SPI-based MMC controller"
72 depends on MMC_SPI
73 default y
74 help
75 This enables CRC for SPI-based MMC controllers.
76
77 If unsure, say N.
78
Patrice Chotardfcce4202017-10-23 10:57:31 +0200[diff] [blame]79config ARM_PL180_MMCI
80 bool "ARM AMBA Multimedia Card Interface and compatible support"
Patrice Chotardfcce4202017-10-23 10:57:31 +0200[diff] [blame]81 help
82 This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
83 Interface (PL180, PL181 and compatible) support.
84 If you have an ARM(R) platform with a Multimedia Card slot,
85 say Y or M here.
86
Kishon Vijay Abraham I07baaa62017-09-21 16:30:10 +0200[diff] [blame]87config MMC_QUIRKS
88 bool "Enable quirks"
89 default y
90 help
91 Some cards and hosts may sometimes behave unexpectedly (quirks).
92 This option enable workarounds to handle those quirks. Some of them
Joel Johnson9cbee2c2020-01-11 09:08:15 -0700[diff] [blame]93 are enabled by default, other may require additional flags or are
Kishon Vijay Abraham I07baaa62017-09-21 16:30:10 +0200[diff] [blame]94 enabled by the host driver.
95
Tom Rini91735482022-10-28 20:27:05 -0400[diff] [blame]96config SYS_MMC_MAX_BLK_COUNT
97 int "Block count limit"
98 default 65535
99 help
100 The block count limit on MMC based devices. We default to 65535 due
101 to a 16bit register limit on some hardware.
102
Jean-Jacques Hiblot1d7769a2017-11-30 17:44:02 +0100[diff] [blame]103config MMC_HW_PARTITIONING
104 bool "Support for HW partitioning command(eMMC)"
105 default y
106 help
107 This adds a command and an API to do hardware partitioning on eMMC
108 devices.
109
Alex Kiernan60e0f612018-05-08 04:43:31 +0000[diff] [blame]110config SUPPORT_EMMC_RPMB
111 bool "Support eMMC replay protected memory block (RPMB)"
112 imply CMD_MMC_RPMB
113 help
114 Enable support for reading, writing and programming the
115 key for the Replay Protection Memory Block partition in eMMC.
116
Alex Kiernan00848772019-05-01 07:58:27 +0000[diff] [blame]117config SUPPORT_EMMC_BOOT
118 bool "Support some additional features of the eMMC boot partitions"
119 help
120 Enable support for eMMC boot partitions. This also enables
121 extensions within the mmc command.
122
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]123config MMC_IO_VOLTAGE
124 bool "Support IO voltage configuration"
125 help
126 IO voltage configuration allows selecting the voltage level of the IO
127 lines (not the level of main supply). This is required for UHS
128 support. For eMMC this not mandatory, but not enabling this option may
129 prevent the driver of using the faster modes.
130
131config SPL_MMC_IO_VOLTAGE
132 bool "Support IO voltage configuration in SPL"
Tom Rini0a83cc22022-06-10 23:03:09 -0400[diff] [blame]133 depends on SPL_MMC
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]134 help
135 IO voltage configuration allows selecting the voltage level of the IO
136 lines (not the level of main supply). This is required for UHS
137 support. For eMMC this not mandatory, but not enabling this option may
138 prevent the driver of using the faster modes.
139
140config MMC_UHS_SUPPORT
141 bool "enable UHS support"
142 depends on MMC_IO_VOLTAGE
143 help
144 The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
145 cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
146 frequency can go up to 208MHz (SDR104)
147
148config SPL_MMC_UHS_SUPPORT
149 bool "enable UHS support in SPL"
150 depends on SPL_MMC_IO_VOLTAGE
151 help
152 The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
153 cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
154 frequency can go up to 208MHz (SDR104)
155
Peng Faneede83b2019-07-10 14:43:07 +0800[diff] [blame]156config MMC_HS400_ES_SUPPORT
157 bool "enable HS400 Enhanced Strobe support"
158 help
159 The HS400 Enhanced Strobe mode is support by some eMMC. The bus
160 frequency is up to 200MHz. This mode does not tune the IO.
161
162config SPL_MMC_HS400_ES_SUPPORT
163 bool "enable HS400 Enhanced Strobe support in SPL"
Tom Rini0a83cc22022-06-10 23:03:09 -0400[diff] [blame]164 depends on SPL_MMC
Peng Faneede83b2019-07-10 14:43:07 +0800[diff] [blame]165 help
166 The HS400 Enhanced Strobe mode is support by some eMMC. The bus
167 frequency is up to 200MHz. This mode does not tune the IO.
168
Peng Fan46801252018-08-10 14:07:54 +0800[diff] [blame]169config MMC_HS400_SUPPORT
170 bool "enable HS400 support"
171 select MMC_HS200_SUPPORT
172 help
173 The HS400 mode is support by some eMMC. The bus frequency is up to
174 200MHz. This mode requires tuning the IO.
175
176config SPL_MMC_HS400_SUPPORT
177 bool "enable HS400 support in SPL"
Tom Rini0a83cc22022-06-10 23:03:09 -0400[diff] [blame]178 depends on SPL_MMC
Faiz Abbas373954e2019-08-01 16:33:36 +0530[diff] [blame]179 select SPL_MMC_HS200_SUPPORT
Peng Fan46801252018-08-10 14:07:54 +0800[diff] [blame]180 help
181 The HS400 mode is support by some eMMC. The bus frequency is up to
182 200MHz. This mode requires tuning the IO.
183
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]184config MMC_HS200_SUPPORT
185 bool "enable HS200 support"
186 help
187 The HS200 mode is support by some eMMC. The bus frequency is up to
188 200MHz. This mode requires tuning the IO.
189
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]190config SPL_MMC_HS200_SUPPORT
191 bool "enable HS200 support in SPL"
Tom Rini0a83cc22022-06-10 23:03:09 -0400[diff] [blame]192 depends on SPL_MMC
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]193 help
194 The HS200 mode is support by some eMMC. The bus frequency is up to
195 200MHz. This mode requires tuning the IO.
196
Jean-Jacques Hiblota94fb412017-09-21 16:29:53 +0200[diff] [blame]197config MMC_VERBOSE
198 bool "Output more information about the MMC"
199 default y
200 help
201 Enable the output of more information about the card such as the
202 operating mode.
203
Jaehoon Chunge2bf5802018-01-26 19:25:31 +0900[diff] [blame]204config MMC_TRACE
205 bool "MMC debugging"
Jaehoon Chunge2bf5802018-01-26 19:25:31 +0900[diff] [blame]206 help
207 This is an option for use by developer. Enable MMC core debugging.
208
209 If you need to see the MMC core message, say Y.
210
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]211config MMC_DAVINCI
212 bool "TI DAVINCI Multimedia Card Interface support"
213 depends on ARCH_DAVINCI
214 default y
215 help
216 This selects the TI DAVINCI Multimedia card Interface.
217 If you have an DAVINCI board with a Multimedia Card slot,
218 say Y here. If unsure, say N.
219
Masahiro Yamada7942e912017-01-10 13:32:04 +0900[diff] [blame]220config MMC_DW
221 bool "Synopsys DesignWare Memory Card Interface"
Philipp Tomsichb3027472018-11-30 22:13:25 +0100[diff] [blame]222 select BOUNCE_BUFFER
Masahiro Yamada7942e912017-01-10 13:32:04 +0900[diff] [blame]223 help
224 This selects support for the Synopsys DesignWare Mobile Storage IP
225 block, this provides host support for SD and MMC interfaces, in both
226 PIO, internal DMA mode and external DMA mode.
227
Arthur Li055e18e2020-02-20 18:19:35 -0800[diff] [blame]228config MMC_DW_CORTINA
229 bool "Cortina specific extensions for Synopsys DW Memory Card Interface"
230 depends on DM_MMC
231 depends on MMC_DW
232 depends on BLK
Arthur Li055e18e2020-02-20 18:19:35 -0800[diff] [blame]233 help
234 This selects support for Cortina SoC specific extensions to the
235 Synopsys DesignWare Memory Card Interface driver. Select this option
236 for platforms based on Cortina CAxxxx Soc's.
237
Masahiro Yamadaf1ad7282017-01-10 13:32:05 +0900[diff] [blame]238config MMC_DW_EXYNOS
239 bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
240 depends on ARCH_EXYNOS
241 depends on MMC_DW
242 default y
243 help
244 This selects support for Samsung Exynos SoC specific extensions to the
245 Synopsys DesignWare Memory Card Interface driver. Select this option
246 for platforms based on Exynos4 and Exynos5 SoC's.
247
248config MMC_DW_K3
249 bool "K3 specific extensions for Synopsys DW Memory Card Interface"
250 depends on MMC_DW
251 help
252 This selects support for Hisilicon K3 SoC specific extensions to the
253 Synopsys DesignWare Memory Card Interface driver. Select this option
254 for platforms based on Hisilicon K3 SoC's.
255
Masahiro Yamadadc607f82017-01-10 13:32:03 +0900[diff] [blame]256config MMC_DW_ROCKCHIP
Simon Glass4ecaa6d2015-08-30 16:55:37 -0600[diff] [blame]257 bool "Rockchip SD/MMC controller support"
258 depends on DM_MMC && OF_CONTROL
Masahiro Yamada7942e912017-01-10 13:32:04 +0900[diff] [blame]259 depends on MMC_DW
Simon Glass4ecaa6d2015-08-30 16:55:37 -0600[diff] [blame]260 help
261 This enables support for the Rockchip SD/MMM controller, which is
262 based on Designware IP. The device is compatible with at least
263 SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
264 as removeable SD and micro-SD cards.
265
Masahiro Yamadaf1ad7282017-01-10 13:32:05 +0900[diff] [blame]266config MMC_DW_SOCFPGA
267 bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
268 depends on ARCH_SOCFPGA
269 depends on MMC_DW
270 default y
271 help
272 This selects support for Altera SOCFPGA specific extensions to the
273 Synopsys DesignWare Memory Card Interface driver. Select this option
274 for platforms based on Altera SOCFPGA.
275
Eugeniy Paltsevb050c2c2019-02-25 18:35:28 +0300[diff] [blame]276config MMC_DW_SNPS
277 bool "Extensions for DW Memory Card Interface used in Synopsys ARC devboards"
278 depends on MMC_DW
279 depends on DM_MMC
280 depends on OF_CONTROL
281 depends on CLK
282 help
283 This selects support for Synopsys DesignWare Memory Card Interface driver
284 extensions used in various Synopsys ARC devboards.
285
Stefan Bosch22c12f72020-07-10 19:07:29 +0200[diff] [blame]286config NEXELL_DWMMC
287 bool "Nexell SD/MMC controller support"
288 depends on ARCH_NEXELL
289 depends on MMC_DW
290 depends on DM_MMC
291 depends on PINCTRL_NEXELL
292 default y
293
Carlo Caione20cab782017-04-12 20:30:42 +0200[diff] [blame]294config MMC_MESON_GX
295 bool "Meson GX EMMC controller support"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]296 depends on DM_MMC && BLK && ARCH_MESON
Carlo Caione20cab782017-04-12 20:30:42 +0200[diff] [blame]297 help
298 Support for EMMC host controller on Meson GX ARM SoCs platform (S905)
299
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]300config MMC_MXC
301 bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
302 help
303 This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
304 Multimedia Card Interface. If you have an i.MX or MPC512x platform
305 with a Multimedia Card slot, say Y here.
306
307 If unsure, say N.
308
Amit Singh Tomar347494c2021-11-28 17:02:24 +0530[diff] [blame]309config MMC_OWL
310 bool "Actions OWL Multimedia Card Interface support"
311 depends on ARCH_OWL && DM_MMC && BLK
312 help
313 This selects the OWL SD/MMC host controller found on board
314 based on Actions S700/S900 SoC.
315
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]316config MMC_MXS
317 bool "Freescale MXS Multimedia Card Interface support"
Adam Forda456d562018-02-06 08:34:45 -0600[diff] [blame]318 depends on MX23 || MX28 || MX6 || MX7
Philipp Tomsichb3027472018-11-30 22:13:25 +0100[diff] [blame]319 select BOUNCE_BUFFER
Adam Forda456d562018-02-06 08:34:45 -0600[diff] [blame]320 select APBH_DMA
321 select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7
322 select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]323 help
324 This selects the Freescale SSP MMC controller found on MXS based
325 platforms like mx23/28.
326
327 If unsure, say N.
328
Felipe Balbiecf7dfd2017-02-20 14:24:13 +0300[diff] [blame]329config MMC_PCI
330 bool "Support for MMC controllers on PCI"
Bin Meng3d81f022021-02-15 20:01:44 +0800[diff] [blame]331 depends on MMC_SDHCI
Felipe Balbiecf7dfd2017-02-20 14:24:13 +0300[diff] [blame]332 help
333 This selects PCI-based MMC controllers.
334 If you have an MMC controller on a PCI bus, say Y here.
335
Suneel Garapati40e61332019-10-19 18:03:01 -0700[diff] [blame]336config MMC_OCTEONTX
Stefan Roesee06f5522021-03-12 09:48:25 +0100[diff] [blame]337 bool "Marvell Octeon Multimedia Card Interface support"
338 depends on (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2)
Suneel Garapati40e61332019-10-19 18:03:01 -0700[diff] [blame]339 depends on DM_MMC
340 help
Stefan Roesee06f5522021-03-12 09:48:25 +0100[diff] [blame]341 This selects the Octeon Multimedia card Interface.
342 If you have an OcteonTX/TX2 or MIPS Octeon board with a
343 Multimedia Card slot, say Y here.
Suneel Garapati40e61332019-10-19 18:03:01 -0700[diff] [blame]344
Felipe Balbiecf7dfd2017-02-20 14:24:13 +0300[diff] [blame]345 If unsure, say N.
346
Harm Berntsen7b9e5af2021-03-30 10:19:41 +0200[diff] [blame]347config MVEBU_MMC
348 bool "Kirkwood MMC controller support"
349 depends on DM_MMC && BLK && ARCH_KIRKWOOD
350 help
351 Support for MMC host controller on Kirkwood SoCs.
352 If you are on a Kirkwood architecture, say Y here.
353
354 If unsure, say N.
355
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]356config MMC_OMAP_HS
357 bool "TI OMAP High Speed Multimedia Card Interface support"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]358 select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
Jean-Jacques Hiblot4612bdd2017-09-21 17:03:10 +0200[diff] [blame]359 select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]360 help
361 This selects the TI OMAP High Speed Multimedia card Interface.
362 If you have an omap2plus board with a Multimedia Card slot,
363 say Y here.
364
365 If unsure, say N.
366
Jean-Jacques Hiblotcebf0592018-02-23 10:40:18 +0100[diff] [blame]367config MMC_OMAP_HS_ADMA
368 bool "ADMA support for OMAP HS MMC"
369 depends on MMC_OMAP_HS && !OMAP34XX
370 default y if !AM33XX
371 help
372 This enables support for the ADMA2 controller (SDA3.00 Part A2 DMA
373 controller). If supported by the hardware, selecting this option will
374 increase performances.
375
Adam Fordef354962017-02-06 11:31:43 -0600[diff] [blame]376config MMC_OMAP36XX_PINS
377 bool "Enable MMC1 on OMAP36xx/37xx"
378 depends on OMAP34XX && MMC_OMAP_HS
379 help
380 This enables extended-drain in the MMC/SD/SDIO1I/O and
381 GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129)
382 specific to the OMAP36xx/37xx using MMC1
383
384 If you have a controller with this interface, say Y here.
385
386 If unsure, say N.
387
Tom Riniaf816552022-12-02 16:42:16 -0500[diff] [blame]388config HSMMC2_8BIT
389 bool "Enable 8-bit interface for eMMC (interface #2)"
390 depends on MMC_OMAP_HS && (OMAP44XX || OMAP54XX || DRA7XX || AM33XX || \
391 AM43XX || ARCH_KEYSTONE)
392
Nobuhiro Iwamatsu3ec5f862014-12-17 08:03:00 +0900[diff] [blame]393config SH_SDHI
394 bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
Marek Vasut1c5a5a92017-05-13 15:51:14 +0200[diff] [blame]395 depends on ARCH_RMOBILE
Nobuhiro Iwamatsu3ec5f862014-12-17 08:03:00 +0900[diff] [blame]396 help
397 Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
398
Marek Vasuta8624ac2018-04-21 17:40:20 +0200[diff] [blame]399config SH_MMCIF
400 bool "SuperH/Renesas ARM SoCs on-chip MMCIF host controller support"
401 depends on ARCH_RMOBILE || SH
402 help
403 Support for the on-chip MMCIF host controller on SuperH/Renesas ARM SoCs platform
404
Masahiro Yamadaa0cfcc02016-02-18 19:52:48 +0900[diff] [blame]405config MMC_UNIPHIER
Marek Vasut2883f742017-09-23 13:30:30 +0200[diff] [blame]406 bool "UniPhier SD/MMC Host Controller support"
407 depends on ARCH_UNIPHIER
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]408 depends on BLK && DM_MMC
Masahiro Yamadac2326532016-12-30 23:20:14 +0900[diff] [blame]409 depends on OF_CONTROL
Masahiro Yamadaa0cfcc02016-02-18 19:52:48 +0900[diff] [blame]410 help
Marek Vasut847ee0c2017-07-21 23:24:36 +0200[diff] [blame]411 This selects support for the Matsushita SD/MMC Host Controller on
Marek Vasut2883f742017-09-23 13:30:30 +0200[diff] [blame]412 SocioNext UniPhier SoCs.
413
414config RENESAS_SDHI
415 bool "Renesas R-Car SD/MMC Host Controller support"
416 depends on ARCH_RMOBILE
417 depends on BLK && DM_MMC
418 depends on OF_CONTROL
Marek Vasut9f7baeb2020-04-04 12:45:04 +0200[diff] [blame]419 select BOUNCE_BUFFER
Marek Vasut2883f742017-09-23 13:30:30 +0200[diff] [blame]420 help
421 This selects support for the Matsushita SD/MMC Host Controller on
422 Renesas R-Car SoCs.
Masahiro Yamadaa0cfcc02016-02-18 19:52:48 +0900[diff] [blame]423
Alexander Graf044725f2018-01-23 18:05:22 +0100[diff] [blame]424config MMC_BCM2835
425 bool "BCM2835 family custom SD/MMC Host Controller support"
426 depends on ARCH_BCM283X
427 depends on BLK && DM_MMC
428 depends on OF_CONTROL
429 default y
430 help
431 This selects support for the custom SD host controller in the BCM2835
432 family of devices.
433
434 If you have a BCM2835 platform with SD or MMC devices, say Y here.
435
436 If unsure, say N.
437
Paul Burton8e142842018-12-16 19:25:20 -0300[diff] [blame]438config JZ47XX_MMC
439 bool "Ingenic JZ47xx SD/MMC Host Controller support"
440 depends on ARCH_JZ47XX
441 help
442 This selects support for the SD Card Controller on Ingenic JZ47xx SoCs.
443
Masahiro Yamada54f7cfc2017-01-30 19:46:50 +0900[diff] [blame]444config MMC_SANDBOX
Simon Glassf9eebac2016-05-01 13:52:42 -0600[diff] [blame]445 bool "Sandbox MMC support"
Masahiro Yamada54f7cfc2017-01-30 19:46:50 +0900[diff] [blame]446 depends on SANDBOX
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]447 depends on BLK && DM_MMC && OF_CONTROL
Simon Glassf9eebac2016-05-01 13:52:42 -0600[diff] [blame]448 help
449 This select a dummy sandbox MMC driver. At present this does nothing
450 other than allow sandbox to be build with MMC support. This
451 improves build coverage for sandbox and makes it easier to detect
452 MMC build errors with sandbox.
453
Masahiro Yamada7db8c172016-12-07 22:10:28 +0900[diff] [blame]454config MMC_SDHCI
455 bool "Secure Digital Host Controller Interface support"
456 help
457 This selects the generic Secure Digital Host Controller Interface.
458 It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
459 and Toshiba(R). Most controllers found in laptops are of this type.
460
461 If you have a controller with this interface, say Y here.
462
463 If unsure, say N.
464
Masahiro Yamadabfd110f2016-12-07 22:10:30 +0900[diff] [blame]465config MMC_SDHCI_IO_ACCESSORS
466 bool
467 depends on MMC_SDHCI
468 help
469 This is silent Kconfig symbol that is selected by the drivers that
470 need to overwrite SDHCI IO memory accessors.
471
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]472config MMC_SDHCI_SDMA
473 bool "Support SDHCI SDMA"
474 depends on MMC_SDHCI
475 help
476 This enables support for the SDMA (Single Operation DMA) defined
477 in the SD Host Controller Standard Specification Version 1.00 .
478
Faiz Abbas4c082a62019-04-16 23:06:58 +0530[diff] [blame]479config MMC_SDHCI_ADMA
480 bool "Support SDHCI ADMA2"
481 depends on MMC_SDHCI
Michael Walle02016c62020-09-23 12:42:51 +0200[diff] [blame]482 select MMC_SDHCI_ADMA_HELPERS
Faiz Abbas4c082a62019-04-16 23:06:58 +0530[diff] [blame]483 help
484 This enables support for the ADMA (Advanced DMA) defined
485 in the SD Host Controller Standard Specification Version 3.00
486
487config SPL_MMC_SDHCI_ADMA
488 bool "Support SDHCI ADMA2 in SPL"
Tom Rini0a83cc22022-06-10 23:03:09 -0400[diff] [blame]489 depends on SPL_MMC && MMC_SDHCI
Michael Walle02016c62020-09-23 12:42:51 +0200[diff] [blame]490 select MMC_SDHCI_ADMA_HELPERS
Faiz Abbas4c082a62019-04-16 23:06:58 +0530[diff] [blame]491 help
492 This enables support for the ADMA (Advanced DMA) defined
493 in the SD Host Controller Standard Specification Version 3.00 in SPL.
494
Chris Packham7d5d5912022-05-29 11:13:17 +1200[diff] [blame]495config FIXED_SDHCI_ALIGNED_BUFFER
496 hex "SDRAM address for fixed buffer"
497 depends on SPL && MVEBU_SPL_BOOT_DEVICE_MMC
498 default 0x00180000
499 help
500 On the Marvell Armada 38x when the SPL runs it located in internal
501 SRAM which is the L2 cache locked to memory. When the MMC buffers
502 are located on the stack (or bss), the SDIO controller (SDHCI) can't
503 write into this L2 cache memory.
504
505 This specifies the address of a fixed buffer located in SDRAM that
506 will be used for all SDHCI transfers in the SPL.
507
Eddie Jamesc8a65812019-08-27 09:48:03 -0500[diff] [blame]508config MMC_SDHCI_ASPEED
509 bool "Aspeed SDHCI controller"
510 depends on ARCH_ASPEED
511 depends on DM_MMC
512 depends on MMC_SDHCI
Joel Stanley818a6b52022-06-23 18:35:34 +0930[diff] [blame]513 select MISC
Eddie Jamesc8a65812019-08-27 09:48:03 -0500[diff] [blame]514 help
515 Enables support for the Aspeed SDHCI 2.0 controller present on Aspeed
516 SoCs. This device is compatible with SD 3.0 and/or MMC 4.3
517 specifications. On the AST2600, the device is also compatible with
518 MMC 5.1 and eMMC 3.0.
519
Masahiro Yamada8c1a1322017-01-30 19:46:55 +0900[diff] [blame]520config MMC_SDHCI_ATMEL
521 bool "Atmel SDHCI controller support"
522 depends on ARCH_AT91
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]523 depends on DM_MMC && BLK && ARCH_AT91
Masahiro Yamada8c1a1322017-01-30 19:46:55 +0900[diff] [blame]524 depends on MMC_SDHCI
525 help
526 This enables support for the Atmel SDHCI controller, which supports
527 the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
528 Memory Card Specification V3.0, and the SDIO V3.0 specification.
529 It is compliant with the SD Host Controller Standard V3.0
530 specification.
531
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]532config MMC_SDHCI_BCM2835
533 tristate "SDHCI support for the BCM2835 SD/MMC Controller"
534 depends on ARCH_BCM283X
535 depends on MMC_SDHCI
Masahiro Yamadabfd110f2016-12-07 22:10:30 +0900[diff] [blame]536 select MMC_SDHCI_IO_ACCESSORS
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]537 help
538 This selects the BCM2835 SD/MMC controller.
539
540 If you have a BCM2835 platform with SD or MMC devices,
541 say Y here.
542
543 If unsure, say N.
544
Thomas Fitzsimmons919646d2018-06-08 17:59:45 -0400[diff] [blame]545config MMC_SDHCI_BCMSTB
546 tristate "SDHCI support for the BCMSTB SD/MMC Controller"
547 depends on MMC_SDHCI
548 help
549 This selects the Broadcom set-top box SD/MMC controller.
550
551 If you have a BCMSTB platform with SD or MMC devices,
552 say Y here.
553
554 If unsure, say N.
555
Masahiro Yamadadcbc4432016-12-30 22:41:46 +0900[diff] [blame]556config MMC_SDHCI_CADENCE
557 bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]558 depends on BLK && DM_MMC
Masahiro Yamadadcbc4432016-12-30 22:41:46 +0900[diff] [blame]559 depends on MMC_SDHCI
560 depends on OF_CONTROL
561 help
562 This selects the Cadence SD/SDIO/eMMC driver.
563
564 If you have a controller with this interface, say Y here.
565
566 If unsure, say N.
567
Faiz Abbasd8fb3092019-06-11 00:43:31 +0530[diff] [blame]568config MMC_SDHCI_AM654
569 bool "SDHCI Controller on TI's Am654 devices"
Lokesh Vutlabc9979f2018-08-27 15:57:54 +0530[diff] [blame]570 depends on ARCH_K3
571 depends on MMC_SDHCI
572 depends on DM_MMC && OF_CONTROL && BLK
Faiz Abbase9aed582019-06-11 00:43:38 +0530[diff] [blame]573 depends on REGMAP
Faiz Abbas36c8c5c2021-02-04 15:10:54 +0530[diff] [blame]574 select MMC_SDHCI_IO_ACCESSORS
Lokesh Vutlabc9979f2018-08-27 15:57:54 +0530[diff] [blame]575 help
Faiz Abbasd8fb3092019-06-11 00:43:31 +0530[diff] [blame]576 Support for Secure Digital Host Controller Interface (SDHCI)
577 controllers present on TI's AM654 SOCs.
Lokesh Vutlabc9979f2018-08-27 15:57:54 +0530[diff] [blame]578
Arun Parameswaran2f4f34a2019-09-12 11:06:08 -0700[diff] [blame]579config MMC_SDHCI_IPROC
580 bool "SDHCI support for the iProc SD/MMC Controller"
581 depends on MMC_SDHCI
582 help
583 This selects the iProc SD/MMC controller.
584
585 If you have a Broadcom IPROC platform with SD or MMC devices,
586 say Y or M here.
587
588 If unsure, say N.
589
Jassi Brar8188bda2021-06-04 18:44:16 +0900[diff] [blame]590config MMC_SDHCI_F_SDH30
Kunihiko Hayashi2cd5da62022-09-09 16:23:33 +0900[diff] [blame]591 bool "SDHCI support for Fujitsu Semiconductor/Socionext F_SDH30"
Jassi Brar8188bda2021-06-04 18:44:16 +0900[diff] [blame]592 depends on BLK && DM_MMC
593 depends on MMC_SDHCI
594 help
595 This selects the Secure Digital Host Controller Interface (SDHCI)
Kunihiko Hayashi2cd5da62022-09-09 16:23:33 +0900[diff] [blame]596 Needed by some Fujitsu/Socionext SoC for MMC / SD / SDIO support.
Jassi Brar8188bda2021-06-04 18:44:16 +0900[diff] [blame]597 If you have a controller with this interface, say Y or M here.
598 If unsure, say N.
599
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]600config MMC_SDHCI_KONA
601 bool "SDHCI support on Broadcom KONA platform"
602 depends on MMC_SDHCI
603 help
604 This selects the Broadcom Kona Secure Digital Host Controller
605 Interface(SDHCI) support.
606 This is used in Broadcom mobile SoCs.
607
608 If you have a controller with this interface, say Y here.
609
Masahiro Yamadaa1262eb2017-01-30 19:46:53 +0900[diff] [blame]610config MMC_SDHCI_MSM
611 bool "Qualcomm SDHCI controller"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]612 depends on BLK && DM_MMC
Masahiro Yamadaa1262eb2017-01-30 19:46:53 +0900[diff] [blame]613 depends on MMC_SDHCI
614 help
615 Enables support for SDHCI 2.0 controller present on some Qualcomm
616 Snapdragon devices. This device is compatible with eMMC v4.5 and
617 SD 3.0 specifications. Both SD and eMMC devices are supported.
618 Card-detect gpios are not supported.
619
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]620config MMC_SDHCI_MV
621 bool "SDHCI support on Marvell platform"
622 depends on ARCH_MVEBU
623 depends on MMC_SDHCI
Stefan Roesefb0720b2023-02-10 13:23:52 +0100[diff] [blame]624 depends on DM_MMC
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]625 help
626 This selects the Secure Digital Host Controller Interface on
627 Marvell platform.
628
629 If you have a controller with this interface, say Y here.
630
631 If unsure, say N.
632
Jim Liu29cf22c2022-05-24 16:55:33 +0800[diff] [blame]633config MMC_SDHCI_NPCM
634 bool "SDHCI support on Nuvoton NPCM device"
635 depends on MMC_SDHCI
636 depends on DM_MMC
637 help
638 This selects the Secure Digital Host Controller Interface (SDHCI)
639 on Nuvoton NPCM device.
640
641 If you have a controller with this interface, say Y here.
642
643 If unsure, say N.
644
Masahiro Yamadaf79df032017-01-30 19:46:54 +0900[diff] [blame]645config MMC_SDHCI_PIC32
646 bool "Microchip PIC32 on-chip SDHCI support"
647 depends on DM_MMC && MACH_PIC32
648 depends on MMC_SDHCI
649 help
650 Support for Microchip PIC32 SDHCI controller.
651
Masahiro Yamadababe0262017-01-30 19:46:52 +0900[diff] [blame]652config MMC_SDHCI_ROCKCHIP
653 bool "Arasan SDHCI controller for Rockchip support"
654 depends on ARCH_ROCKCHIP
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]655 depends on DM_MMC && BLK
Masahiro Yamadababe0262017-01-30 19:46:52 +0900[diff] [blame]656 depends on MMC_SDHCI
657 help
658 Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
659
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]660config MMC_SDHCI_S5P
661 bool "SDHCI support on Samsung S5P SoC"
662 depends on MMC_SDHCI
663 help
664 This selects the Secure Digital Host Controller Interface (SDHCI)
665 on Samsung S5P SoCs.
666
667 If you have a controller with this interface, say Y here.
668
669 If unsure, say N.
670
Patrice Chotard2eea7d82017-02-21 13:37:09 +0100[diff] [blame]671config MMC_SDHCI_STI
672 bool "SDHCI support for STMicroelectronics SoC"
Patrice Chotardcdf6b572017-02-21 13:37:11 +0100[diff] [blame]673 depends on MMC_SDHCI && OF_CONTROL
Patrice Chotard2eea7d82017-02-21 13:37:09 +0100[diff] [blame]674 help
675 This selects the Secure Digital Host Controller Interface (SDHCI)
676 on STMicroelectronics STiH410 SoC.
677
Stefan Roese121fc562016-12-09 15:03:28 +0100[diff] [blame]678config MMC_SDHCI_XENON
679 bool "SDHCI support for the Xenon SDHCI controller"
680 depends on MMC_SDHCI && DM_MMC && OF_CONTROL
681 help
682 Support for Xenon SDHCI host controller on Marvell Armada 3700
683 7k/8k ARM SoCs platforms
684
685 If you have a controller with this interface, say Y here.
686
687 If unsure, say N.
688
Felipe Balbib7567602017-02-20 14:24:14 +0300[diff] [blame]689config MMC_SDHCI_TANGIER
690 bool "Tangier SDHCI controller support"
691 depends on DM_MMC && BLK
692 depends on MMC_SDHCI
693 help
694 This selects support for SDHCI controller on Tanginer
695 SoC. Note that this controller does not sit on PCI bus and,
696 hence, cannot be enumerated by standard PCI means.
697
698 If you're using an Intel Tangier SoC (available on Intel
699 Edison board), say Y here.
700
701 If unsure, say N.
702
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]703config MMC_SDHCI_TEGRA
704 bool "SDHCI platform support for the Tegra SD/MMC Controller"
Trevor Woerner513f6402020-05-06 08:02:41 -0400[diff] [blame]705 depends on ARCH_TEGRA
Philipp Tomsichb3027472018-11-30 22:13:25 +0100[diff] [blame]706 select BOUNCE_BUFFER
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]707 default y
708 help
709 This selects the Tegra SD/MMC controller. If you have a Tegra
710 platform with SD or MMC devices, say Y here.
711
712 If unsure, say N.
713
Trent Piepho1bf56c32019-04-01 23:05:49 +0000[diff] [blame]714config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
715 bool "Disable external clock loopback"
716 depends on MMC_SDHCI_TEGRA && TEGRA124
717 help
718 Disable the external clock loopback and use the internal one on SDMMC3
719 as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits
720 being set to 0xfffd according to the TRM.
721
722 TODO(marcel.ziswiler@toradex.com): Move to device tree controlled
723 approach once proper kernel integration made it mainline.
724
Masahiro Yamada168c57d2017-01-30 19:46:51 +0900[diff] [blame]725config MMC_SDHCI_ZYNQ
726 bool "Arasan SDHCI controller support"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]727 depends on DM_MMC && OF_CONTROL && BLK
Masahiro Yamada168c57d2017-01-30 19:46:51 +0900[diff] [blame]728 depends on MMC_SDHCI
729 help
730 Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
731
Vipul Kumar62548002018-02-28 15:53:28 +0530[diff] [blame]732config ZYNQ_SDHCI_MAX_FREQ
733 int "Set the maximum frequency of the controller"
734 depends on MMC_SDHCI_ZYNQ
735 help
736 Set the maximum frequency of the controller.
737
Vipul Kumardcc14e32018-02-28 15:53:29 +0530[diff] [blame]738config ZYNQ_SDHCI_MIN_FREQ
739 int "Set the minimum frequency of the controller"
740 depends on MMC_SDHCI_ZYNQ
741 default 0
742 help
743 Set the minimum frequency of the controller.
744
Siva Durga Prasad Paladugua9a3d002019-05-27 14:33:14 +0530[diff] [blame]745config ZYNQ_HISPD_BROKEN
746 bool "High speed broken for Zynq SDHCI controller"
747 depends on MMC_SDHCI_ZYNQ
748 help
749 Set if high speed mode is broken.
750
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]751config MMC_SUNXI
752 bool "Allwinner sunxi SD/MMC Host Controller support"
Samuel Holland6b0d0bc2022-04-10 00:13:34 -0500[diff] [blame]753 depends on ARCH_SUNXI
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]754 default y
755 help
756 This selects support for the SD/MMC Host Controller on
757 Allwinner sunxi SoCs.
758
Maxime Ripard95e34702017-08-23 12:03:41 +0200[diff] [blame]759config MMC_SUNXI_HAS_NEW_MODE
760 bool
761 depends on MMC_SUNXI
762
Vasily Khoruzhickb198e2c2018-11-09 20:41:44 -0800[diff] [blame]763config MMC_SUNXI_HAS_MODE_SWITCH
764 bool
765 depends on MMC_SUNXI
766
Tianrui Wei8cfc7c52021-07-01 12:54:20 +0800[diff] [blame]767config MMC_PITON
768 bool "MMC support for OpenPiton SoC"
769 depends on DM_MMC && BLK
770 help
771 This selects support for the SD host controller on OpenPiton SoC.
772 Note that this SD controller directly exposes the contents of the
773 SD card as memory mapped, so there is no manual configuration
774 required
775
Wenyou Yang7a7a64c2017-04-13 10:29:22 +0800[diff] [blame]776config GENERIC_ATMEL_MCI
777 bool "Atmel Multimedia Card Interface support"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]778 depends on DM_MMC && BLK && ARCH_AT91
Wenyou Yang7a7a64c2017-04-13 10:29:22 +0800[diff] [blame]779 help
780 This enables support for Atmel High Speed Multimedia Card Interface
781 (HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3,
782 the SD Memory Card Specification V2.0, the SDIO V2.0 specification
783 and CE-ATA V1.1.
784
Patrice Chotardae19b812017-09-04 17:56:22 +0200[diff] [blame]785config STM32_SDMMC2
786 bool "STMicroelectronics STM32H7 SD/MMC Host Controller support"
Patrice Chotard4cb0ac92017-10-03 15:54:58 +0200[diff] [blame]787 depends on DM_MMC && BLK && OF_CONTROL
Patrice Chotardae19b812017-09-04 17:56:22 +0200[diff] [blame]788 help
789 This selects support for the SD/MMC controller on STM32H7 SoCs.
790 If you have a board based on such a SoC and with a SD/MMC slot,
791 say Y or M here.
792
Rick Chencbb52972017-11-14 14:47:09 +0800[diff] [blame]793config FTSDC010
794 bool "Ftsdc010 SD/MMC controller Support"
795 help
796 This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP.
797
Rick Chenc59a6fb2018-03-20 15:10:49 +0800[diff] [blame]798config FTSDC010_SDIO
799 bool "Support ftsdc010 sdio"
Rick Chenc59a6fb2018-03-20 15:10:49 +0800[diff] [blame]800 depends on FTSDC010
801 help
802 This can enable ftsdc010 sdio function.
803
developerdc5a9aa2018-11-15 10:08:04 +0800[diff] [blame]804config MMC_MTK
805 bool "MediaTek SD/MMC Card Interface support"
developer607faf72019-09-25 17:45:37 +0800[diff] [blame]806 depends on ARCH_MEDIATEK || ARCH_MTMIPS
developerdc5a9aa2018-11-15 10:08:04 +0800[diff] [blame]807 depends on BLK && DM_MMC
808 depends on OF_CONTROL
809 help
810 This selects the MediaTek(R) Secure digital and Multimedia card Interface.
811 If you have a machine with a integrated SD/MMC card reader, say Y or M here.
812 This is needed if support for any SD/SDIO/MMC devices is required.
813 If unsure, say N.
814
Masahiro Yamadae8b99722016-12-07 22:10:27 +0900[diff] [blame]815endif
816
Tom Rini6fb86c12022-12-02 16:42:21 -0500[diff] [blame]817config FSL_SDHC_V2_3
818 bool
819
Mario Six41d7d972018-03-28 14:38:19 +0200[diff] [blame]820config FSL_ESDHC
821 bool "Freescale/NXP eSDHC controller support"
Tom Rini6fb86c12022-12-02 16:42:21 -0500[diff] [blame]822 select FSL_SDHC_V2_3 if ARCH_P1010 || ARCH_BSC9131 || ARCH_BSC9132 \
823 || ARCH_C29X
Mario Six41d7d972018-03-28 14:38:19 +0200[diff] [blame]824 help
Yangbo Lu982f4252019-06-21 11:42:27 +0800[diff] [blame]825 This selects support for the eSDHC (Enhanced Secure Digital Host
826 Controller) found on numerous Freescale/NXP SoCs.
827
Michael Walle081d4012020-10-12 10:07:14 +0200[diff] [blame]828config FSL_ESDHC_SUPPORT_ADMA2
829 bool "enable ADMA2 support"
830 depends on FSL_ESDHC
831 select MMC_SDHCI_ADMA_HELPERS
832 help
833 This enables support for the ADMA2 transfer mode. If supported by the
834 eSDHC it will allow 64bit DMA addresses.
835
Yangbo Luce884022020-05-19 11:06:44 +0800[diff] [blame]836config FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND
837 bool "enable eSDHC workaround for 3.3v IO reliability issue"
838 depends on FSL_ESDHC && DM_MMC
Yangbo Luce884022020-05-19 11:06:44 +0800[diff] [blame]839 help
840 When eSDHC operates at 3.3v, damage can accumulate in an internal
841 level shifter at a higher than expected rate. The faster the interface
842 runs, the more damage accumulates. This issue now is found on LX2160A
843 eSDHC1 for only SD card. The hardware workaround is recommended to use
844 an on-board level shifter that is 1.8v on SoC side and 3.3v on SD card
845 side. For boards without hardware workaround, this option could be
846 enabled, ensuring 1.8v IO voltage and disabling eSDHC if no card.
847 This option assumes no hotplug, and u-boot has to make all the way to
848 to linux to use 1.8v UHS-I speed mode if has card.
849
Yangbo Lue087cd62021-06-03 10:51:17 +0800[diff] [blame]850config FSL_ESDHC_VS33_NOT_SUPPORT
851 bool "3.3V power supply not supported"
852 depends on FSL_ESDHC
853 help
854 For eSDHC, power supply is through peripheral circuit. 3.3V support is
855 common. Select this if 3.3V power supply not supported.
856
Pali Rohár3a672d62022-05-11 20:27:13 +0200[diff] [blame]857config SYS_FSL_ESDHC_DEFAULT_BUS_WIDTH
858 int
859 depends on FSL_ESDHC
860 default 1
861
Tom Rinibdd47f32022-06-16 14:04:38 -0400[diff] [blame]862config ESDHC_DETECT_QUIRK
863 bool "QIXIS-based eSDHC quirk detection"
864 depends on FSL_ESDHC && FSL_QIXIS
865
Yangbo Lu982f4252019-06-21 11:42:27 +0800[diff] [blame]866config FSL_ESDHC_IMX
867 bool "Freescale/NXP i.MX eSDHC controller support"
868 help
869 This selects support for the i.MX eSDHC (Enhanced Secure Digital Host
870 Controller) found on numerous Freescale/NXP SoCs.
Mario Six41d7d972018-03-28 14:38:19 +0200[diff] [blame]871
Tom Rinidad332b2022-07-31 21:08:25 -0400[diff] [blame]872config SYS_FSL_ESDHC_HAS_DDR_MODE
873 bool "i.MX eSDHC controller supports DDR mode"
874 depends on FSL_ESDHC_IMX
875
Adam Ford01836582019-08-14 07:23:43 -0500[diff] [blame]876config FSL_USDHC
877 bool "Freescale/NXP i.MX uSDHC controller support"
Peng Fan29b31a52022-07-26 16:40:44 +0800[diff] [blame]878 depends on MX6 || MX7 ||ARCH_MX7ULP || IMX8 || IMX8M || IMX8ULP || IMX9 || IMXRT
Adam Ford01836582019-08-14 07:23:43 -0500[diff] [blame]879 select FSL_ESDHC_IMX
880 help
881 This enables the Ultra Secured Digital Host Controller enhancements
882
Tom Rinif8967f82022-12-02 16:42:22 -0500[diff] [blame]883config FSL_ESDHC_PIN_MUX
884 bool "Perform esdhc device-tree fixup"
885 depends on (FSL_ESDHC || FSL_ESDHC_IMX) && OF_LIBFDT
886
Nobuhiro Iwamatsu3ec5f862014-12-17 08:03:00 +0900[diff] [blame]887endmenu
York Sun097e3602016-12-28 08:43:42 -0800[diff] [blame]888
889config SYS_FSL_ERRATUM_ESDHC111
890 bool
891
892config SYS_FSL_ERRATUM_ESDHC13
893 bool
894
895config SYS_FSL_ERRATUM_ESDHC135
896 bool
897
898config SYS_FSL_ERRATUM_ESDHC_A001
899 bool
Michael Walle148dc612021-03-17 15:01:36 +0100[diff] [blame]900
901config SYS_FSL_ERRATUM_A011334
902 bool
Michael Walle7259dc52021-03-17 15:01:37 +0100[diff] [blame]903
904config SYS_FSL_ESDHC_UNRELIABLE_PULSE_DETECTION_WORKAROUND
905 bool