blob: e3003e0ddad60f6c64d0bfde06523860d9d9736b [file] [log] [blame]
wdenk24ee89b2002-11-03 17:56:27 +00001======================================================================
Wolfgang Denke4bf4e12005-12-19 13:02:45 +01002Changes since U-Boot 1.1.4:
3======================================================================
4
Wolfgang Denk4b416fe2006-03-12 01:21:19 +01005* Word alignment fixes for word aligned NS16550 UART
6 Patch by Jean-Paul Saman, 01 Mar 2005
7
8 Fixes bug with UART that only supports word aligned access: removed
9 "__attribute__ ((packed));" for "(CFG_NS16550_REG_SIZE == 4)" some
10 (broken!) versions of GCC generate byte accesses when encountering
11 the packed attribute regardless if the struct is already correctly
12 aligned for a platform. Peripherals that can only handle word
13 aligned access won't work properly when accessed with byte access.
14 The struct NS16550 is already word aligned for REG_SIZE = 4, so
15 there is no need to packed the struct in that case.
16
Wolfgang Denk98ceffb2006-03-12 01:13:30 +010017* Fix behaviour if gatewayip is not set
18 Patch by Robin Gilks, 23 Dec 2004
19
Wolfgang Denk1ad61692006-03-12 00:04:20 +010020* Fix cleanup for netstart board.
21 Remove build results from repository
22
Wolfgang Denk7fa6e902006-03-11 22:53:33 +010023* Some code cleanup for GCC 4.x
24
Wolfgang Denk8b4a8072006-03-11 19:15:27 +010025* Fixes to support environment in NAND flash;
26 enable NAND flash based environment for delta board.
27
Wolfgang Denkd7c0a162006-03-07 00:33:28 +010028* Add support for Intel Monahans CPU on Zylonite and Delta boards
29 (This is Work in Progress!)
30
Wolfgang Denk47673562006-03-07 00:32:07 +010031* Add support for TQM8260-AI boards.
32
Wolfgang Denk67777b92006-03-06 13:03:37 +010033* Minor code cleanup
34
Wolfgang Denkac53b702006-03-06 11:25:22 +010035* Merge the new NAND code (testing-NAND brach); see doc/README.nand
Bartlomiej Sieka6eed2ab2006-02-24 09:37:22 +010036 Rewrite of NAND code based on what is in 2.6.12 Linux kernel
Wolfgang Denk2f9b7e42005-08-17 12:55:25 +020037 Patch by Ladislav Michl, 29 Jun 2005
38
Stefan Roese531e94c2006-03-04 14:57:03 +010039* Add lowboot target to mcc200 board
40 Patch by Stefan Roese, 4 Mar 2006
41
Stefan Roese896391f2006-03-01 17:00:49 +010042* Fix problem with flash_get_size() from CFI driver update
43 Patch by Stefan Roese, 1 Mar 2006
44
Wolfgang Denk706c6502006-03-02 11:03:05 +010045* Make CFG_NO_FLASH work on ARM systems
46 Patch by Markus Klotzbuecher, 27 Feb 2006
47
Wolfgang Denk8256a8f2006-02-28 18:39:20 +010048* Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock,
49 use hush shell.
50
Stefan Roese254a3d02006-02-28 15:33:28 +010051* Convert mcc200 to use common CFI flash driver
52 Patch by Stefan Roese, 28 Feb 2006
53
Stefan Roesec865e6c2006-02-28 15:29:58 +010054* Add env-variable "unlock" to handle initial state of sectors
55 (locked/unlocked).
56
57 Only the U-Boot image and it's environment is protected,
58 all other sectors are unprotected (unlocked) if flash
59 hardware protection is used (CFG_FLASH_PROTECTION) and
60 the environment variable "unlock" is set to "yes".
61
62 Patch by Stefan Roese, 28 Feb 2006
63
64* Update drivers/cfi_flash.c:
65 - find_sector() called in both versions of flash_write_cfiword()
66 Patch by Peter Pearse, 27th Feb 2006
67
68* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode
69 Patch by Jose Maria Lopez, 16 Jan 2006
70
71* Add support for AMD/Spansion Flashes in flash_write_cfibuffer
72 Patch by Alex Bastos and Thomas Schaefer, 2005-08-29
73
74* Changes/fixes for drivers/cfi_flash.c:
75 We *should* check if there are any error bits if the previous call
76 returned ERR_OK (Otherwise we will have output an error message in
77 flash_status_check() already.) The original code would only check for
78 error bits if flash_status_check() returns ERR_TIMEOUT.
79 Patch by Marcus Hall, 23 Aug 2005
80
81* Changes/fixes for drivers/cfi_flash.c:
82 - Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c
83 - Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c
84 Patch by Sangmoon Kim, 19 Aug 2005
85
86* Fixes for drivers/cfi_flash.c:
87 - Fix wrong timeout value usage in flash_status_check()
88 - Round write_tout up when converting to msec in flash_get_size()
89 - Remove clearing flash status at the end of flash_write_cfibuffer()
90 which sets Intel 28F640J3 flash back to command mode on CSB472
91 Patch by Tolunay Orkun, 02 July 2005
92
Heiko Schocher808f2532006-02-20 17:34:12 +010093* Add basic support for the SMMACO4 Board from PanDaCom.
94 Patch by Heiko Schocher, 20 Feb 2006
95
Wolfgang Denk4d1d9a32006-02-21 17:33:04 +010096* Add GIT version information (commid ID) to untagged U-Boot versions
97
98 As done in the linux kernel, the U-Boot version (U_BOOT_VERSION)
99 of all unreleased (untagged) U-Boot images will be automatically
100 extended upon compiletime with a part of the GIT commit ID and
101 possibly with "dirty" if uncommited changes are detected.
102
103 Here an example for the resulting version:
104 "U-Boot 1.1.4-g3457ac18-dirty"
105
106 The version is now maintained in the toplevel Makefile and the
107 version headers are autogenerated.
108
109 Patch by Stefan Roese, 9 Feb 2006
110
Wolfgang Denka71cec72006-02-07 15:18:25 +0100111* Update default environment for INKA4x00 board.
112
Stefan Roese16138f92006-02-08 15:54:15 +0100113* Convert CPCI750 to use common CFI flash driver
114 Patch by Reinhard Arlt, 8 Feb 2006
115
Stefan Roesee10e85e2006-02-07 16:51:04 +0100116* Various changes to esd HH405 board specific files
117 Patch by Matthias Fuchs, 07 Feb 2006
118
Wolfgang Denk7a132ae2006-01-29 19:12:41 +0100119* Cleanup U-Boot boot messages on ARM.
120
121 To match the U-Boot user interface on ARM platforms to the U-Boot
122 standard (as on PPC platforms), some messages with debug character
123 are removed from the default U-Boot build.
124 Enable DEBUG for lib_arm/board.c to enable debug messages.
125 New CONFIG_DISPLAY_CPUINFO and CONFIG_DISPLAY_BOARDINFO options.
126 Patch by Stefan Roese, 24 Jan 2006
127
Stefan Roese1586ded2006-01-18 20:06:44 +0100128* Fix various compiler warnings on ppc4xx builds (ELDK 4.0)
129 Patch by Stefan Roese, 18 Jan 2006
130
Stefan Roeseb7a97c72006-01-18 20:05:34 +0100131* Add VGA support (CT69000) to CPCI750 board.
132 Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().
133 Patch by Reinhard Arlt, 30 Dec 2005
134
Stefan Roese1c671a92006-01-18 20:03:15 +0100135* PMC405 and CPCI405: Moved configuration of pci resources
136 into config file.
137 PMC405 and CPCI2DP: Added firmware download and booting via pci.
138 Patch by Matthias Fuchs, 20 Dec 2005
139
Wolfgang Denk7e4fe592006-01-13 17:00:56 +0100140* Fix 28F256J3A support on PM520 board
141 (without bank-switching only 32 MB can be accessed)
142
Wolfgang Denk71c36292006-01-11 13:04:53 +0100143* Fix mkimage bug with multifile images created on 64 bit systems.
144
Wolfgang Denk7e4fe592006-01-13 17:00:56 +0100145* Add support for 28F256J3A flash (=> 64 MB) on PM520 board
Wolfgang Denk618582e2005-12-29 15:12:09 +0100146
Wolfgang Denke4bf4e12005-12-19 13:02:45 +0100147* Fix compiler problem with at91rm9200dk board.
148 Patch by Eugen Bigz, 19 Dec 2005
149
150======================================================================
Stefan Roese5ff4c3f2005-08-15 12:31:23 +0200151Changes for U-Boot 1.1.4:
152======================================================================
153
Stefan Roesee75a8a12005-12-15 09:43:12 +0100154* Changes to Yellowstone & Yosemite 440EP/GR eval boards:
155 - Changed GPIO setup to enable another address line in order to
156 address 64M of FLASH.
157 - Added function sdram_tr1_set to auto calculate the tr1 value for
158 the DDR.
159 Patch by Steven Blakeslee, 12 Dec 2005
160
Wolfgang Denk3bb216f2005-12-16 15:14:18 +0100161* MPC5200: Set PCI retry counter to 0 = infinite retry;
162 The default of 255 is too short for slow devices.
163 Patch by Martin Nykodym, 12 Dec 2005
164
Marian Balakowicz5534c192005-12-06 20:33:07 +0100165* Change port configuration for O2DNT (CODEC1 on PSC1).
166
Wolfgang Denkaaa7c002005-12-12 16:06:05 +0100167* Fix register for PCI async mode on PPC440EP
168 Patch by Youngchul Bang, 08 Dec 2005
169
170* Fix U-Boot linking problems (add .eh_frame segment to linker script)
171 This segment may be required by some libgcc.a functions
172 (like _udivdi3).
173
Wolfgang Denk3bd697b2005-12-06 15:02:31 +0100174* Fix DPRAM offset/size for MPC8541/8555.
175 Simplify TQM85xx Makefile handling.
176
Wolfgang Denk445a0422005-12-04 11:20:57 +0100177* Fix data overflow (typo?) in rtc/ds1302.c
178
Wolfgang Denk117b0b12005-12-01 02:15:07 +0100179* Fix U-Boot compilation for MIPS boards using ELDK 4.0
180
Stefan Roese09554022005-11-30 13:06:40 +0100181* Add support for TQM8541/8555 boards, TQM85xx support reworked:
182 - Support for TQM8541/8555 boards added.
183 - Complete rework of TQM8540/8560 support.
184 - Common TQM85xx code now supports all current TQM85xx platforms
185 (TQM8540/8541/8555/8560).
186 - DDR SDRAM size detection added.
187 - CAS latency default values can be overwritten by setting "serial#"
188 to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
189 If problems are detected with this non default CAS latency,
Wolfgang Denk068a3ae2005-12-01 01:38:13 +0100190 the default values will be used instead.
191 - Flash size detection added.
Stefan Roese09554022005-11-30 13:06:40 +0100192 - Moved FCC ethernet driver initialization behind TSEC driver init
193 -> TSEC is first device.
194 Patch by Stefan Roese, 30 Nov 2005
195
Stefan Roese99644742005-11-29 18:18:21 +0100196* Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
197 Patch by John Otken, 23 Nov 2005
198
Stefan Roese42f2a822005-11-27 19:36:26 +0100199* Changed PPC44x startup message (cpu info, speed...) to common style:
200 On PPC44x platforms, the startup message generated in "cpu.c" only
Wolfgang Denk068a3ae2005-12-01 01:38:13 +0100201 comprised the ppc type and revision but not additional information
Stefan Roese42f2a822005-11-27 19:36:26 +0100202 like speed etc. Those speed infos where printed in the board specific
203 code. This new implementation now prints all CPU infos in the common
204 cpu specific code. No board specific code is needed anymore and
205 therefore removed from all current 44x implementations.
206 Patch by Stefan Roese, 27 Nov 2005
207
Wolfgang Denk626a55a2005-12-01 01:17:24 +0100208* Adjust TQM834x PHY addresses for latest hardware revision.
209
Wolfgang Denk16c192e2005-12-01 00:55:19 +0100210* Increase malloc arena on TQM5200 board to 256 kB.
211 With 64 kb uniform flash sector size the old value of 128 kB was
212 too small.
Wolfgang Denkf6a692b2005-12-04 00:40:34 +0100213
Wolfgang Denk16c192e2005-12-01 00:55:19 +0100214* Fix miiphy global data initialization (problem on 4xx boards when
215 no ethaddr is assigned). Initialization moved from
216 miiphy_register() to eth_initialize().
Marian Balakowiczcbdd1c82005-11-30 18:06:04 +0100217
218 Based on initial patch for 4xx platform by Matthias Fuchs.
219
Wolfgang Denkf3f45182005-11-25 16:38:03 +0100220* Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h
221
Wolfgang Denk921c1922005-11-25 10:38:43 +0100222* Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.
223 The COPYING file was extended to make clear that these files can be
224 used in non-GPL code, too.
Wolfgang Denkf3f45182005-11-25 16:38:03 +0100225 Also, a corresponding note was placed in the headers of the affected files.
Wolfgang Denk921c1922005-11-25 10:38:43 +0100226
Stefan Roesec443fe92005-11-22 13:20:42 +0100227* Add support for Prodrive P3P440 board:
228 - Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
229 - CFG_FLASH_QUIET_TEST added to use the common CFI driver
230 for bank autodetection
231 Patch by Stefan Roese, 22 Nov 2005
232
Wolfgang Denk86eb3b72005-11-20 21:40:11 +0100233* Change all '$(...)' variable references into '${...}'
234 which makes the environment compatible with the hush shell.
235 WARNING: Support for the old '$(...)' syntax will be
236 discontinued in a later version.
237
Rafal Jaworowskice49c272005-11-17 00:26:18 +0100238* Minor changes to init flags in TQM834x PCI.
239
Stefan Roesef67d6e62005-11-15 16:26:34 +0100240* Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
241 Patch by Stefan Roese, 15 Nov 2005
242
Stefan Roesef2303272005-11-15 10:35:59 +0100243* New PPC 405EP board added: CMS700
244 Added CONFIG_NET_MULTI for VOM405 board.
245 Added reset_phy() for VOM405 board.
246 Patch by Matthias Fuchs, 09 Nov 2005
247
Stefan Roese780984e2005-11-08 09:00:09 +0100248* Updated PCI mapping for esd CPCI2DP board.
249 Add support for error LED.
250 Patch by Matthias Fuchs, 07 Nov 2005
251
Stefan Roese8c695512005-11-07 13:43:06 +0100252* Fix MPC85xx PCI support (pci_register_hose() before pci config access)
253 Patch by Stefan Roese, 07 Nov 2005
254
Stefan Roese259e1192005-11-07 09:57:57 +0100255* Correct PPC Timebase register definitions (SPRN_TBRL...)
256 Patch by Stefan Roese, 07 Nov 2005
257
Stefan Roesee8c34722005-11-05 15:50:16 +0100258* Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
259 Patch by Stefan Roese, 05 Nov 2005
260
Stefan Roese65a6b7e2005-11-03 08:31:33 +0100261* Additional fix for external IRQ config on Yellowstone & Yosemite
262 Patch by Stefan Roese, 03 Nov 2005
263
Stefan Roese08fb4042005-11-01 10:08:03 +0100264* Add support for Ocotea pass 3 with 440GX Rev. F
265 Patch by Stefan Roese, 01 Nov 2005
266
Stefan Roesed0ab2f32005-10-28 12:21:06 +0200267* Fix external IRQ configuration on Yellowstone & Yosemite
268 Patch by Stefan Roese, 28 Oct 2005
269
Marian Balakowicza14b9762005-10-29 14:48:59 +0200270* Add support for multiple PHYs.
Wolfgang Denk323016d2005-10-29 23:50:20 +0200271 Tested on the following boards:
272 cmcpu2 (at91rm9200/ether.c)
273 PPChameleon (ppc4xx/4xx_enet.c)
274 yukon (mpc8220/fec.c)
275 uc100 (mpc8xx/fec.c)
276 tqm834x (mpc834x/tsec.c) with EEPRO100
277 lite5200 (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c)
278 Main changes include:
279 common/miiphyutil.c
280 - miiphy_register routine was added to allow multiple PHYs to be registered
281 - miiphy_read and miiphy_write are now defined in this file, and
282 require additional argument (char *devname)
283 - other miiphy_* routines also require additional device name argument
284 ../lib_i386/board.c
285 ../lib_ppc/board.c
286 Calling reset_phy() was moved to be executed *after* eth_initialize().
287 This is necessary as now some of the implementations of reset_phy()
288 may need to use miiphy_reset() which is not allowed before eth_initialize()
289 as eth_initialize registers all required miiphy_* routines.
290 Tested on IP860 and PHY initializes properly after this change.
Marian Balakowicza14b9762005-10-29 14:48:59 +0200291
292* Correct includes for flat tree builder.
293
294* Fix conflicting types (flash_write()) in trab auto_update.c.
295
Rafal Jaworowski384da5e2005-10-17 02:39:53 +0200296* Add PCI support for the TQM834x board.
297
Stefan Roesede243fef2005-10-20 16:40:17 +0200298* Add missing 4xx board to MAKEALL
299 Patch by Stefan Roese, 20 Oct 2005
300
Stefan Roesebcb3b272005-10-20 16:39:16 +0200301* Fix conflicting types (flash_write()) in esd auto_update.c
302 Patch by Stefan Roese, 20 Oct 2005
303
Stefan Roesef1d66992005-10-20 16:36:44 +0200304* Fix problem with sleep in NetConsole (use get_timer())
305 Patch by Stefan Roese, 20 Oct 2005
306
Stefan Roese7f98aec2005-10-20 16:34:28 +0200307* Add NetConsole Support for AMCC eval boards
308 Patch by Stefan Roese, 20 Oct 2005
309
Stefan Roesec8136d02005-10-18 19:17:12 +0200310* Fix NetConsole support on 4xx (only print eth link on 1st transfer)
311 Patch by Stefan Roese, 18 Oct 2005
312
Stefan Roese764784c2005-10-14 15:37:34 +0200313* Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo.
Wolfgang Denk30320682005-10-17 00:24:00 +0200314 Fix identation on ext2ls help entry.
Stefan Roese764784c2005-10-14 15:37:34 +0200315 Patch by Stefan Roese, 14 Oct 2005
316
Wolfgang Denkb4bc9b22005-10-15 18:43:50 +0200317* Add support for TQM834x boards.
318 Cleanup.
319
Wolfgang Denk7fb52662005-10-13 16:45:02 +0200320* Cleanup for GCC-4.x
321
Wolfgang Denk74c666c2005-10-13 10:41:25 +0200322* Add documentation for Open Firmware Flat Tree and usage.
323 Patch by Pantelis Antoniou, 13 Oct 2005
324
Wolfgang Denk6a63e362005-10-13 01:59:29 +0200325* Add missing files for Pantelis Antoniou's patch
326 Patch by Pantelis Antoniou, 04 Sep 2005
327
Stefan Roese03510612005-10-10 17:43:58 +0200328* Fix problem in ppc4xx eth-driver without ethaddr (only without
329 CONFIG_NET_MULTI set)
330 Patch by Stefan Roese, 10 Oct 2005
331
Stefan Roese13b93692005-10-08 10:19:07 +0200332* Fix gzip bmp support (test if malloc fails, warning when truncated).
333 Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
334 Patch by Stefan Roese, 07 Oct 2005
335
Wolfgang Denkdfb18422005-10-13 01:49:09 +0200336* Add support for OF flat tree for the STXtc board.
337 Patch by Pantelis Antoniou, 04 Sep 2005
338
Wolfgang Denk27a5b0b2005-10-13 01:45:54 +0200339* Support passing of OF flat trees to the kernel.
340 Patch by Pantelis Antoniou, 04 Sep 2005
341
Wolfgang Denk3193a652005-10-09 01:41:48 +0200342* Cleanup
343
344* Add support for NetSilicon NS7520 processor.
345 Patch by Art Shipkowski, 12 May 2005
346
Wolfgang Denk56811f62005-10-09 01:04:33 +0200347* Add support for AP1000 board.
348 Patch by James MacAulay, 07 Oct 2005
349
Wolfgang Denkfbb97cc2005-10-09 00:33:37 +0200350* Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
351 Patch by Anders Larsen, 07 Oct 2005
352
353 The Atmel errata #11 states that the transfer buffer descriptor
354 table must be aligned on a 16-word boundary. As it turned out, this
355 is insufficient - it seems the table must be aligned on a boundary
356 at least as large as the table itself (in Linux this is not an
357 issue - the table is aligned on a PAGE_SIZE (4096) boundary).
358
Wolfgang Denk23f0d172005-10-09 00:25:58 +0200359* Fixed compilation for ARM when using a (standard) hard-FP toolchain
Wolfgang Denk3193a652005-10-09 01:41:48 +0200360 Patch by Anders Larsen, 07 Oct 2005
Wolfgang Denk23f0d172005-10-09 00:25:58 +0200361
Wolfgang Denk88bd7432005-10-09 00:22:48 +0200362* Cleanup warnings for cpu/arm720t & cpu/arm1136 files.
363 sed the linker scripts, rather than pre-process them.
364 Patch by Peter Pearse, 07 Oct 2005
365
Wolfgang Denk7f88a5e2005-10-06 17:08:18 +0200366* Update make target for ARM supported boards.
367 Use lowlevel_init() instead of platformsetup() [rename].
368 Patch by Peter Pearse, 06 Oct 2005
369
Wolfgang Denk63e44ff2005-10-06 01:50:50 +0200370* Fix booting from serial dataflash on AT91RM9200
371 Patch by Peter Menzebach, 29 Aug 2005
372
Wolfgang Denkd1afd912005-10-06 01:46:57 +0200373* Add JFFS2 support for TRAB board
374 Patch by Martin Krause, 25 Aug 2005
375
Wolfgang Denkd2da2872005-10-06 01:43:39 +0200376* Remove unnecessary dependency of netconsole on CONFIG_NET_MULTI
377 Patch by Marcus Hall, 24 Aug 2005
378
Wolfgang Denk463432f2005-10-06 01:26:16 +0200379* Fix the machine-id of the Cogent csb637 board
380 Patch by Anders Larsen, 05 Oct 2005
381
Wolfgang Denk9a9f2472005-10-06 01:22:22 +0200382* Complete support for the KwikByte KB920x boards
383 Patch by Anders Larsen, 05 Oct 2005
384
Wolfgang Denk1d281202005-10-05 02:06:08 +0200385* Set the AT91RM9200 clock to asynchronous mode
386 Patch by Anders Larsen, 03 May 2005
387
Wolfgang Denk7aea95a2005-10-05 02:02:25 +0200388* Set the AT91RM9200 clock to synchronous mode
389 Patch by Anders Larsen, 29 Apr 2005
390
Wolfgang Denke35470b2005-10-05 02:00:09 +0200391* Add support for Cogent csb637
392 Patch by Anders Larsen, 29 Apr 2005
393
Wolfgang Denkcf25b452005-10-05 01:54:04 +0200394* Fix dm9161.c initialization
395 Patch by Anders Larsen, 29 Apr 2005
396
Wolfgang Denkbc650fa2005-10-05 01:51:29 +0200397* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
398 (8e2be51de8dd03c1ce4d06cbb18ad06133d47cd5)
399
400* Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
401 Patch by Anders Larsen, 29 Apr 2005
402
Wolfgang Denk6f3b1cd2005-10-05 00:25:17 +0200403* Fix device partition intialization for SystemACE disks.
404 Patch by Stephen Williams, 28 Apr 2005
405
Wolfgang Denk9da240c2005-10-05 00:19:34 +0200406* Added support for KwikByte KB920x boards (based on AT91RM9200)
407 Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
408
Wolfgang Denk79fd8e92005-10-05 00:03:55 +0200409* Add support for S29GL064M-R3 flash chip on xsengine board
410 Patch by Kurt Stremerch, 18 Apr 2005
411
Wolfgang Denk29dcbd42005-10-05 00:00:54 +0200412* E500 update: repoint IVPR to RAM when code is relocated
413 Patch by Kylo Ginsberg, 13 Apr 2005
414
Wolfgang Denkdf70a422005-10-04 23:38:07 +0200415* Fix loop end test in lib_generic/string.c:strswab()
416 Patch by Andrew Dyer, October 10, 2005
417 Signed-off-by: Andrew Dyer <amdyer@gmail.com>
418
Wolfgang Denk03f9ba32005-10-04 23:10:28 +0200419* Cleanup
420
421* Update ARM Integrator boards:
422 Correct addessing errors in platform files.
423 Split off common core module data from Integrator header files to
424 include/armcoremodule.h.
425 Patch by Peter Pearse, 04 Oct 2005
426
Wolfgang Denkaba58092005-10-04 22:38:24 +0200427* Make sure only supported compiler options are used
428 Import "cc-option" shell function from kernel and
429 use it to get the correct ARM GCC options for individual CPUs
430 Patch by Peter Pearse, 30 Jun 2005
431
Stefan Roese95258d52005-10-04 15:00:30 +0200432* Fix 440GR to print correct cpu revision
Wolfgang Denk03f9ba32005-10-04 23:10:28 +0200433 Patch by Stefan Roese, 04 Oct 2005
Stefan Roese95258d52005-10-04 15:00:30 +0200434
Stefan Roese5b9ab142005-10-03 15:27:50 +0200435* Change board message on AMCC Yosemite & Yellowstone to common style
Wolfgang Denk03f9ba32005-10-04 23:10:28 +0200436 Patch by Stefan Roese, 03 Oct 2005
Stefan Roese5b9ab142005-10-03 15:27:50 +0200437
Wolfgang Denkb0723792005-09-30 15:18:23 +0200438* Fix compiler warning
439
Wolfgang Denk61d85622005-09-29 12:16:38 +0200440* Fix FEC PHY addresses for TQM85xx boards
441
Wolfgang Denk00b67fd2005-09-28 01:49:47 +0200442* Fix uninitialized variable problem in hush shell
443 Patch by Lars Rostock, 26 Sep 2005
444
Wolfgang Denk2734f8a2005-09-26 23:40:37 +0200445* Undo change of f6e20fc6ca... to include/configs/trab.h
446 (Must have been an accident?)
447
Wolfgang Denk8a6820a2005-09-26 01:26:56 +0200448* Add support for AT91RM9200 OHCI Controller.
449 Patch by Eric Benard, 07 Apr 2005
450
Wolfgang Denkb97b4c62005-09-26 01:18:22 +0200451* Update ARM mach-types.h
452 Patch by Eric Benard, 07 Apr 2005
453
Wolfgang Denk756bfd72005-09-26 01:14:38 +0200454* Add support for MP2USB board.
455 Patch by Eric Benard, 07 Apr 2005
456
Wolfgang Denk4dc11462005-09-26 01:06:33 +0200457* Add board support for armadillo HT1070
458 Patch by Rowel Atienza, 06 Apr 2005
459
Wolfgang Denke0ae0912005-09-26 00:53:02 +0200460* Second Ethernet address enabled for MPC885ADS and MPC8272ADS.
461 Patch by Vitaly Bordug, 30 Mar 2005
462
Wolfgang Denkcba3feb2005-09-26 00:44:15 +0200463* Add iopset command on mpc8xx
464 Patch by Daniel Eisenhut, 25 Mar 2005
465
Wolfgang Denkb8d1f512005-09-26 00:39:59 +0200466* Add support for MII in eepro100 driver.
467 Patch by Gleb Natapov, 21 Mar 2005
468
Wolfgang Denka03f16f2005-09-26 00:29:53 +0200469* Fixes to the Lubbock (PXA 25x) support:
470 - Resolve the FIXME with respect to saving the u-boot environment.
471 - Make the default load address land in real memory.
472 - Fix lan91c96 SMC_{in,out}{b,w,l}() macros
473 Patch by David Brownell, 10 Mar 2005
474
Wolfgang Denka48c7252005-09-25 18:59:36 +0200475* Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
476 Patch by Marc Leeman, 04 Mar 2005
477
Wolfgang Denke1e46792005-09-25 18:41:04 +0200478* OMAP242x H4 board update
479 - fix for ES2 differences.
480 - switch to using the cfi_flash driver.
481 - fix SRAM build address.
482 - fix for GP device operation.
483 - unlock SRAM for GP devices.
484 - display more device information.
485 - fix potential deadlock in omap24xx_i2c driver.
486 - fix DLL load values to match dpllout*1 operation.
487 - fix 2nd chip select init for combo DDR device.
488 - add support for CFI Intel 28F256L18 on H4 board.
489 Patch by Richard Woodruff, 03 Mar 2005
490
Wolfgang Denk712fb8e2005-09-25 17:14:20 +0200491* Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h
492 Patch by Steven Scholz, 02 Mar 2005
493
Wolfgang Denkb6ea6302005-09-25 17:05:57 +0200494* Fix typo in eth.c
495 Patch by Ara Avanesyan, 24 Feb 2005
496
Wolfgang Denk64934202005-09-25 17:02:27 +0200497* Remove unneeded #include <malloc.h>
498 Patch by Ladislav Michl, 22 Feb 2005
499
Wolfgang Denkf90377e2005-09-25 16:59:36 +0200500* Add cramfs support for m68k
501 Patch by Zachary Landau, 21 Feb 2005
502
Wolfgang Denk42ae5672005-09-25 16:56:15 +0200503* Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
Wolfgang Denk34ca9d32005-09-25 18:49:35 +0200504 Patch by Jeff Angielski, 21 Feb 2005
505
Wolfgang Denk017bc0d2005-09-25 16:50:33 +0200506* Fix au1x00_serial baud rate calculation:
507 remove hardcoded cpu clock divisor and use register instead;
508 round up instead of truncate
509 Patch by Andrew Dyer, 15 Feb 2005
510
Wolfgang Denkc38e70c2005-09-25 16:44:21 +0200511* Add Xilinx Spartan3 family FPGA support
Wolfgang Denk017bc0d2005-09-25 16:50:33 +0200512 Patch by Kurt Stremerch, 14 Feb 2005
Wolfgang Denkc38e70c2005-09-25 16:44:21 +0200513
Wolfgang Denka205a8f2005-09-25 16:41:22 +0200514* Fix drivers/cfi_flash.c: use info->reset_cmd instead of FLASH_CMD_RESET
515 Patch by Zachary Landau, 11 Feb 2005
516
Wolfgang Denkb9c93d22005-09-25 16:31:16 +0200517* Fix VOH405 Support
518 Patch by Matthias Fuchs, 25 Sep 2005
519
Wolfgang Denk8cc89d92005-09-25 16:27:55 +0200520* Added support for PCI bridge on MPC8272ADS
521 Patch by Vitaly Bordug, Feb 09 2005
522
Wolfgang Denk5d6879c2005-09-25 16:22:14 +0200523* Update multicore CM9XX support for Integrator AP to allow booting from flash
524 Patch by Jean-Paul Saman, 8 Feb 2005
525
Wolfgang Denkc7ca7cf2005-09-25 16:15:17 +0200526* Fix strswab() to reliably find end of string
527 Patch by Andrew Dyer, 08 Feb 2005
528
Wolfgang Denkff4b91f2005-09-25 16:01:42 +0200529* Fix typos in include/ppc440.h
530 Patch by Andrew E Mileski, 04 Feb 2005
531
Wolfgang Denk70de6132005-09-25 15:57:49 +0200532* Add Vibren (was Accelent) PXA255 IDP Support
533 Patch by Cliff Brake, 04 Feb 2005
534
Wolfgang Denk375a89f2005-09-25 15:39:00 +0200535* Fix tools/bmp_logo.c using incorrect offset to pixel data
536 Patch by Andrew Dyer, 31 Jan 2005
537
Wolfgang Denkadf20a12005-09-25 01:48:28 +0200538* Add ARM946E cpu and core module targets; remap memory to 0x00000000
539 Patch by Peter Pearse, 2 Feb 2005
540
Wolfgang Denk8e6213c2005-09-25 01:20:38 +0200541* Fix error handling in tools/env/fw_env.c
542 Patch by Ara Avanesyan, 01 Feb 2005
543
Wolfgang Denk42a14192005-09-25 01:09:58 +0200544* Fix MGT5100 PSC baudrate calculation
545 Patch by Sebastian Schau, 27 Jan 2005
546
Wolfgang Denkb4567f22005-09-25 00:59:24 +0200547* OMAP242x fix for GP device booting
548 - Add SRAM unlock for GP devices.
549 - Change DDR DLL unlock value to allow DPLLout*1 operation.
550 Patches by Richard Woodruff, 21 Jan 2005:
551
Wolfgang Denk0cbaf642005-09-25 00:53:22 +0200552* Add support for AMD's Pb1x00 eval board;
553 add MII routines to the au1x00 ethernet driver;
554 add USB ohci driver (work in progress)
555 Patch by Thomas Sailer, 20 Jan 2005
556
Wolfgang Denkd3abe5a2005-09-25 00:23:05 +0200557* Update omap5912osk board
558 Use drivers/cfi_flash.c instead of private flash driver;
559 Remove hardcoded personalized settings from omap5912osk.h;
560 Fix spacing with (RO) marks in 'flinfo' output.
561 Patch by Michael Bendzick, 14 Jan 2005
562
Wolfgang Denka37cb302005-09-25 00:00:45 +0200563* Fix warnings for PCI code on ixp
564 Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
565
Wolfgang Denkffb77562005-09-24 23:41:00 +0200566* virtex2 fix for bogus download error messages
567 The virtex2 FPGA download code watches for init going active during
568 a download of config data as an error condition. init also goes
569 active after a configuration is finished in concert with the done
570 signal. So far, the code does not check for done active until all
571 of the configuration data is sent. If configuration data has a few
572 extra pad bytes at the end, this would cause an error message even
573 though the download had suceeded.
574 NOTE: virtex2 slave serial and spartan2 versions may still have the
575 same problem.
576 Patch by Andrew Dyer, 12 Jan 2005
577
Wolfgang Denk07bdb022005-09-24 23:32:48 +0200578* Optimize flash_make_cmd in drivers/cfi_flash.c for little endian
579 Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode"
580 message when probing for nonexistent flash in little endian mode.
581 As a side effect more efficient and smaller code is generated,
582 which is always a Good Thing (TM).
583 Patch by Ladislav Michl, 24 Sep 2005
584
Wolfgang Denk227b5192005-09-24 23:25:46 +0200585* Update for TFTP using a fixed UDP port
586 Use the approved environment variable names. Added "tftpdstp" to
587 allow ports other than 69 per Tolunay Orkun's recommendation.
588 Patch by Jerry Van Baren, 12 Jan 2005
589
Wolfgang Denke3cfce52005-09-24 22:37:32 +0200590* Allow to force TFTP to use a fixed UDP port
591 (Add a configuration option CONFIG_TFTP_PORT and optional env
592 variable tftpport)
593 Patch by Jerry Van Baren, 10 Jan 2005
594
Wolfgang Denkaa9d1522005-09-24 22:05:40 +0200595* Fix ethernet timeouts on dbau1550 and other au1x00 systems
596 Patch by Leif Lindholm, 29 Dec 2004
597
Wolfgang Denkedb65482005-09-24 21:54:50 +0200598* Cleanup: fix broken builds
599
600* Fix PHY address argument passing with mii info command
601 Patch by Andrew Dyer, 28 Dec 2004
602
Wolfgang Denk0ee70772005-09-23 11:05:55 +0200603* Cleanup (PPC4xx is AMCC now)
604
Stefan Roesea34997d2005-09-22 09:16:57 +0200605* esd CPCI2DP board added
606 Patch by Matthias Fuchs, 22 Sep 2005
607
Stefan Roese031dc5c2005-09-22 09:07:15 +0200608* esd PMC405 board updated
609 Patch by Matthias Fuchs, 22 Sep 2005
610
Stefan Roesed9d97742005-09-22 09:04:17 +0200611* Add SM501 support to HH405 board.
612 Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
613 Add support for eeprom write-enable (CFG_EEPROM_WREN).
614 Patch by Stefan Roese, 22 Sep 2005
615
Wolfgang Denkcecb6c72005-09-22 09:34:17 +0200616* Fix autonegotiation in tsec ethernet driver
617 Patch by Stefan Roese, 21 Sep 2005
618
Wolfgang Denk78b7b562005-09-21 15:31:25 +0200619* Fix bug in auto_update (trab board)
620 Patch by Martin Krause, 16 Sep 2005
621
Wolfgang Denkc4df5a42005-09-21 15:24:52 +0200622* Fix computation of framebuffer palette for 8bpp LCD bitmaps
623 Patch by Francesco Mandracci, 16 Sep 2005
624
Wolfgang Denkf67ef1e2005-09-21 10:07:56 +0200625* Update configuration for INKA4x0 board
626
Wolfgang Denk242cc932005-09-21 09:59:55 +0200627* Update configuration for PM854 board
628 Based on patch by R. Loeffl, 20 Jul 2005
629
Stefan Roesedc6472a2005-09-15 14:41:11 +0200630* Add PCI support to TQM8540 and TQM8560 boards
631 Patch by Stefan Roese, 15 Sep 2005
632
Stefan Roese27ea7a92005-09-15 11:34:07 +0200633* Update AMCC Yosemite to get a consistent setup for all AMCC eval
634 boards (baudrate, environment...). Flash driver fixed.
635 Patch by Stefan Roese, 15 Sep 2005
636
Stefan Roese74309032005-09-07 16:21:12 +0200637* Fix problem in 440GP ethernet driver (ebony). Add support for 2nd
638 ethernet port on ebony.
639 Patch by Stefan Roese, 7 Sep 2005
640
Marian Balakowiczfe1444a2005-09-11 15:27:12 +0200641* Added support for mtddevnum and mtddevname variables (mtdparts command)
642
Wolfgang Denk969542b2005-09-13 00:12:33 +0200643* Change default console baud rate for stxxtc board
644
Stefan Roeseac553282005-08-31 12:55:50 +0200645* Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
Stefan Roeseac553282005-08-31 12:55:50 +0200646 Patch by Stefan Roese, 31 Aug 2005
647
Wolfgang Denkd452a1e2005-09-03 02:22:41 +0200648* Fix default command set (don't include CFG_CMD_DISPLAY command)
649 Patch by Pantelis Antoniou, 02 Sep 2005
650
Wolfgang Denka836f2a2005-09-03 01:58:35 +0200651* Cleanup
652
Wolfgang Denkdfa35a22005-09-03 01:23:25 +0200653* Enable SM712 driver support for HMI1001 board.
654
Wolfgang Denke156d472005-08-31 12:30:09 +0200655* Fix problems with ld version 2.16 (dot outside sections problem)
656 Pointed out by Gerhard Jaeger, 31 Aug 2005;
657 cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
658
659* Prepare U-Boot for gcc-4.x: fix global data pointer initialization
660
661* Adjust CS3 timings on HMI1001 board for dot matrix display under Linux
662
663* Add keyboard and dot matrix display support for HMI1001 board.
664
665* Prepare U-Boot for gcc-4.x
666
Wolfgang Denk4dccdc22005-08-24 12:41:18 +0200667* Fixed Bamboo port to enable running without DDR-DIMM
668 (Bamboo has also 64MB onboard DDR)
Stefan Roese0da2de52005-08-24 11:21:36 +0200669 Patch by Stefan Roese, 24 Aug 2005
670
Wolfgang Denk8e4c71f2005-08-23 23:04:40 +0200671* Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
672 now handling all 4xx cpu's
673 Patch by Stefan Roese, 16 Aug 2005
674
Wolfgang Denke489c752005-08-23 22:29:44 +0200675* Fix make dependencies for at91rm9200 and ks8695 cpus
676 Patch by Steven Scholz, 23 Aug 2005
677
Wolfgang Denkcc1850e2005-08-23 22:27:41 +0200678* Add JFFS2 support for TQM5200 board
679
Stefan Roese99200d22005-08-22 17:51:53 +0200680* Add esd cpci5200 and pf5200 boards
681 Patch by Reinhard Arlt, 22 Aug 2005
682
Wolfgang Denkb6c85c42005-08-19 00:55:12 +0200683* Fix sysclock for TQM8540 and TQM8560 boards
684 Patch by Martin Krause, 25 Jul 2005
685
Wolfgang Denk9cf56102005-08-19 00:53:02 +0200686* Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2
687 Patch by Martin Krause, 08 Jun 2005
688
Wolfgang Denke4e5e4e2005-08-19 00:46:54 +0200689* Add new board specific commands for TQM5200/STK52XX
690 - Sound commands (beep, wav, sound)
691 - Test commands (led, can, backlight, rs232)
692 Patch by Martin Krause, 02 May 2005
693
694* Change main clock on CMC-PU2 board from 207 MHz to 179 MHz
Wolfgang Denk990ba892005-08-19 00:36:45 +0200695 because of a bug in the AT91RM9200 CPU PLL
696 Patch by Martin Krause, 22 Apr 2005
697
Wolfgang Denk6ba6bdc2005-08-19 00:08:55 +0200698* Add automatic HW detection for another CMC_PU2 variant
699 Patch by Martin Krause, 20 Apr 2005
700
Wolfgang Denk9226f2b2005-08-18 12:21:16 +0200701* Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration
702 Patch by Martin Krause, 19 Apr 2005
703
Wolfgang Denk71112152005-08-18 11:55:22 +0200704* Fix initialization problem on TQM5200 without SM501
Wolfgang Denk6ba6bdc2005-08-19 00:08:55 +0200705 Patch by Martin Krause, 08 Apr 2005
Wolfgang Denk71112152005-08-18 11:55:22 +0200706
Wolfgang Denk09f940b2005-08-18 11:51:12 +0200707* Add RTC support for STK52XX.200
Wolfgang Denk6ba6bdc2005-08-19 00:08:55 +0200708 Patch by Martin Krause, 07 Apr 2005
Wolfgang Denk09f940b2005-08-18 11:51:12 +0200709
Wolfgang Denk672f2e82005-08-18 01:22:22 +0200710* Add support for IFM o2dnt board
711
Wolfgang Denkc10023e2005-08-16 15:17:53 +0200712* Enable PCI on hmi1001 board
713
Wolfgang Denk79117cd2005-08-16 09:32:45 +0200714* Fix return values of the jffs2 commands ls/fsload/fsinfo,
715 so we can use them to, e.g., check the existence of a file with
716 "if ls foo; then this; else that; fi" in the hush shell
717 Patch by Andreas Engel, 16 August 2005
718
Wolfgang Denk85faa8b2005-08-15 16:03:56 +0200719* Coding style cleanup
720
Wolfgang Denk72fdb6c2005-08-15 15:55:00 +0200721* Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
722 Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
723
Stefan Roese5ff4c3f2005-08-15 12:31:23 +0200724* Check return value of malloc in 440gx_enet.c
725 Patch by Travis B. Sawyer, 18 Jul 2005
726
727* Add Sandburst Metrobox and Sandburst Karef board support packages.
728 Second serial port on 440GX now defined as a system device.
729 Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
730 Patch by Travis B. Sawyer, 12 Jul 2005
731
732======================================================================
wdenk26c58432005-01-09 17:12:27 +0000733Changes for U-Boot 1.1.3:
734======================================================================
735
Wolfgang Denk30b87322005-08-12 23:43:12 +0200736* Minor code cleanup
737
Wolfgang Denk532ba4a2005-08-12 23:36:08 +0200738* Add forgotten new fils from latest VoiceBlue update
739
Wolfgang Denk2b7976a2005-08-12 23:34:51 +0200740* Make bootretry feature work with hush shell.
741 Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
742 Patch by Andreas Engel, 19 Jul 2005
743
Wolfgang Denk804ecb12005-08-12 23:27:18 +0200744* Update Hymod Board Database PHP code in "tools" directory
745 Patch by Murray Jensen, 01 Jul 2005
746
Wolfgang Denkaf03f732005-08-12 23:23:46 +0200747* Make "tr" command use POSIX compliant; export HOSTOS make variable
748 Patch by Murray Jensen, 30 Jun 2005
749
Wolfgang Denk2c9dfca2005-08-12 23:20:59 +0200750* Fix Murray Jensen's mail address.
751 Patch by Murray Jensen, 30 Jun 2005
752
Wolfgang Denk8ff63c22005-08-12 23:15:53 +0200753* Preserve PHY_BMCR during a soft reset.
754 Patch by Carl Riechers, 24 Jun 2005
755
Wolfgang Denkdbb564b2005-08-12 22:56:51 +0200756* VoiceBlue update: eeprom tool can also store firmware version now.
757 eeprom.bin is runable by jumping at load address.
758 Patch by Ladislav Michl, 23 May 2005
759
Wolfgang Denk05178242005-08-12 22:38:37 +0200760* Move the AT91RM9200DK to the ARM Systems list.
761 Patch by Anders Larsen, 26 Apr 2005
Wolfgang Denk30b87322005-08-12 23:43:12 +0200762
Wolfgang Denke25f0522005-08-12 22:35:59 +0200763* Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3
764 Patch by Anders Larsen, 26 Apr 2005
765
Wolfgang Denkbb172092005-08-12 22:32:29 +0200766* measure_gclk() is needed when DEBUG is enabled
767 Patch by Bryan O'Donoghue, 25 Apr 2005
768
Stefan Roesedfced812005-08-12 20:06:52 +0200769* Add UPD-Checksum code, fix problem in net.c (return instead of break)
770 Patch by Reinhard Arlt, 12 Aug 2005
771
Stefan Roese1e8519f2005-08-12 16:56:56 +0200772* esd PCI405 board updated
773 Patch by Matthias Fuchs, 28 Jul 2005
774
Stefan Roese36d3bd02005-08-12 16:52:47 +0200775* esd WUH405 and DU405 board updated
776 Patch by Matthias Fuchs, 27 Jul 2005
777
Stefan Roesef9b85672005-08-12 16:46:35 +0200778* Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I)
779 Patch by Matthias Fuchs, 4 May 2005
780
Stefan Roese1d026382005-08-11 18:03:14 +0200781* Update AMCC Yosemite to get a consistent setup for all AMCC eval
782 boards (baudrate, environment...). Flash driver fixed.
783 Patch by Stefan Roese, 11 Aug 2005
784
Stefan Roese00f0d962005-08-11 17:58:40 +0200785* Changed AMCC Bubinga (405EP) configuration to support 2nd eth port
786 Patch by Stefan Roese, 11 Aug 2005
787
Stefan Roese797d8572005-08-11 17:56:56 +0200788* Add NAND FLASH support for AMCC Bamboo 440EP eval board
789 Patch by Stefan Roese, 11 Aug 2005
790
Wolfgang Denkeb95c852005-08-10 15:14:32 +0200791* Add configuration for IFM AEV FIFO board.
792 Minor coding style cleanup.
793
794* Add configuration for IFM SPI eval board
795
Wolfgang Denk298fed22005-08-10 10:06:25 +0200796* Fix CompactFlash problem on HMI1001 board
797
Wolfgang Denkc0d487b2005-08-09 21:41:20 +0200798* Make new "mtdparts" code build with older compilers
799 Patch by Andrea Scian, 09 Aug 2005
800
Stefan Roeseb30f2a12005-08-08 12:42:22 +0200801* Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to
802 CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design
803 with the 405 defines and the linux kernel defines.
804 Patch by Stefan Roese, 08 Aug 2005
805
Wolfgang Denk16439ee2005-08-09 17:25:22 +0200806* Fix compiler warnings with older GCC versions
807
Wolfgang Denk47f57792005-08-08 01:03:24 +0200808* Add common (with Linux) MTD partition scheme and "mtdparts" command
809
810 Old, obsolete and duplicated code was cleaned up and replace by the
811 new partitioning method. There are two possible approaches now:
812
813 The first one is to define a single, static partition:
814
815 #undef CONFIG_JFFS2_CMDLINE
816 #define CONFIG_JFFS2_DEV "nor0"
817 #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF /* use whole device */
818 #define CONFIG_JFFS2_PART_SIZE 0x00100000 /* use 1MB */
819 #define CONFIG_JFFS2_PART_OFFSET 0x00000000
820
821 The second method uses the mtdparts command line option and dynamic
822 partitioning:
823
824 /* mtdparts command line support */
825 #define CONFIG_JFFS2_CMDLINE
826 #define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2"
827 #define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
828
829 Command line of course produces bigger images, and may be inappropriate
830 for some targets, so by default it's off.
831
Wolfgang Denkcee01142005-08-08 00:47:14 +0200832* Fix build problems for PM856 Board
833
Wolfgang Denk4967d102005-08-08 00:14:41 +0200834* Fix sign extension bug in 'fpga loadb' command;
835 make 'fpga loadb' always print the file header info
836 Patch by Andrew Dyer, 11 Jan 2005
837
Wolfgang Denkfdb87ed2005-08-07 23:55:50 +0200838* Fix errors that occur when accessing SystemACE CF
839 Patch by Jeff Angielski, 09 Jan 2005
Stefan Roeseb30f2a12005-08-08 12:42:22 +0200840
Wolfgang Denkedc10112005-08-06 02:11:33 +0200841* Document switching between U-Boot and PlanetCore on RPXlite
842 by Sam Song, 24 Dec 2004
843
Wolfgang Denke37c98a2005-08-06 02:03:03 +0200844* Fix PowerQUICC II mask detection.
845 Patch by Eugene Surovegin, 20 Dec 2004
Stefan Roeseb30f2a12005-08-08 12:42:22 +0200846
Wolfgang Denk9f191a12005-08-06 01:56:59 +0200847* Add support for Altera NIOS DK1C20 board
848 Patch by Shlomo Kut, 13 Dec 2004
849
Wolfgang Denk8dd4d332005-08-06 01:42:58 +0200850* Add support for ep8248 board
851 Patch by Yuli Barcohen, 12 Dec 2004
852
853 Minor code cleanup.
854
Wolfgang Denkaaa85952005-08-06 01:21:19 +0200855* Fix baudrate setting for KGDB on MPC8260
856 Patch by HoJin, 11 Dec 2004
857
Wolfgang Denk5582de62005-08-06 01:13:19 +0200858* Fix 'mii help' text formatting
859 Patch by Cory Tusar, 10 Dec 2004
Wolfgang Denk8dd4d332005-08-06 01:42:58 +0200860
Wolfgang Denkb077b502005-08-06 01:11:12 +0200861* Fix return code of NFS command
862 Patch by Hiroshi Ito, 11 Dec 2004
863
Wolfgang Denk12f62412005-08-06 01:02:27 +0200864* Fix typo
865
Wolfgang Denk58550cc2005-08-06 00:11:50 +0200866* Fix compiler warnings in cpu/ppc4xx/usbdev.c
867 Patch by Steven Blakeslee, 04 Aug 2005
868
Stefan Roese363330b2005-08-04 17:09:16 +0200869* Add support for AMCC Bamboo PPC440EP eval board
870 Patch by Stefan Roese, 04 Aug 2005
871
Jon Loeligerebc72242005-08-01 13:20:47 -0500872* Patch by Jon Loeliger
873 Fix style issues primarily in 85xx and 83xx boards.
874 - C++ comments
875 - Trailing white space
876 - Indentation not by TAB
877 - Excessive amount of empty lines
878 - Trailing empty lines
879
Wolfgang Denk64bd88f2005-08-05 20:03:38 +0200880* Patch by Ron Alder, 11 Jul 2005
Lunsheng Wang61e61952005-07-29 10:20:29 -0500881 Add Xianghua Xiao and Lunsheng Wang's support for the
882 GDA MPC8540 EVAL board.
883
Eran Liberty9095d4a2005-07-28 10:08:46 -0500884* Patch by Eran Liberty
885 Add support for the Freescale MPC8349ADS board.
886
Wolfgang Denk64bd88f2005-08-05 20:03:38 +0200887* Patch by Jon Loeliger, 25 Jul 2005
Jon Loeliger64a96f52005-07-25 15:38:06 -0500888 Move the TSEC driver out of cpu/mpc85xx as it will be shared
889 by the upcoming mpc83xx family as well.
890
Wolfgang Denk64bd88f2005-08-05 20:03:38 +0200891* Patch by Jon Loeliger, 05 May 2005
Jon Loeliger77a4f6e2005-07-25 14:05:07 -0500892 Implemented support for MPC8548CDS board.
893 Added DDR II support based on SPD values for MPC85xx boards.
894 This roll-up patch also includes bugfies for the previously
895 published patches:
896 DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
897
Wolfgang Denk64bd88f2005-08-05 20:03:38 +0200898* Patch by Jon Loeliger, 10 Feb 2005
Jon Loeliger08d88602005-07-25 12:14:54 -0500899 Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
900
Wolfgang Denk64bd88f2005-08-05 20:03:38 +0200901* Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005
Jon Loeliger3f34a402005-07-25 11:13:26 -0500902 For MPC85xxCDS:
903 Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
904 for faster flash parts.
905 Add documentation for BR/OR for FLASH.
906
Wolfgang Denk64bd88f2005-08-05 20:03:38 +0200907* Patch by Jon Loeliger 08 Feb 2005
Jon Loeliger4fc25e42005-07-25 10:58:39 -0500908 Determine L2 Cache size dynamically on 85XX boards.
909
Wolfgang Denk64bd88f2005-08-05 20:03:38 +0200910* Patch by Jon Loeliger, Kumar Gala 08 Feb 2005
Jon Loeligerf5ad3782005-07-23 10:37:35 -0500911 - Convert the CPM2 based functionality to use new CONFIG_CPM2
912 option rather than a myriad of CONFIG_MPC8560-like variants.
913 Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
914 Eliminates the CONFIG_MPC8560 option entirely. Distributes the
915 new CONFIG_CPM2 option to each 8260 board.
wdenk26c58432005-01-09 17:12:27 +0000916
Wolfgang Denk9733b3c2005-08-05 12:19:30 +0200917* Add support for MicroSys PM856 board
918 Patch by Josef Wagner, 03 Aug 2005
919
Wolfgang Denk9b187432005-08-05 11:47:10 +0200920* Minor fixes to PM854 board
921 Patch by Josef Wagner, 03 Aug 2005
922
Wolfgang Denkcd2a04d2005-08-04 19:45:01 +0200923* Adjust configuration of XENIAX board
924 (chip select and GPIO required for USB operation)
925
Wolfgang Denkc94dea22005-08-04 01:24:19 +0200926* Fix typos in cpu/85xx/start.S which caused DataTLB exception to be
927 routed to the Watchdog handler
928 Patch by Eugene Surovegin, 18 Jun 2005
929
Wolfgang Denk9733b3c2005-08-05 12:19:30 +0200930* (re)enabled scsi commands do_scsi() and do_scsiboot()
Wolfgang Denk6a3d6b02005-08-04 01:14:12 +0200931 Patch by Denis Peter, 06 Dec 2004
932
Wolfgang Denkdec97322005-08-04 01:09:44 +0200933* Fix endianess problem in TFTP / NFS default filenames
934 Patch by Hiroshi Ito, 06 Dec 2004
935
Wolfgang Denk116edc92005-08-03 23:03:54 +0200936* Ignore broadcast status bit in received frames in 8260 FCC ethernet
937 loopback test code
938 Patch by Murray Jensen, 18 Jul 2005
939
Wolfgang Denk31c939b2005-08-03 22:58:55 +0200940* Fix typo in mkconfig script (used == instead of =)
941 Patch by Murray Jensen, 18 Jul 2005
942
Wolfgang Denkdb5f3862005-08-03 22:32:02 +0200943* Cleanup build problems on 64 bit build hosts
944
Wolfgang Denkf164d362005-08-03 10:01:54 +0200945* Update MAINTAINERS file
946
Stefan Roese3e1f1b32005-08-01 16:49:12 +0200947* Patch by Stefan Roese, 01 Aug 2005:
948 - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
949 (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
950 for details.
951 - Sycamore (PPC405GPr) eval board added (Walnut port is extended
952 to run on both 405GP and 405GPr eval boards).
953
954* Patch by Steven Blakeslee, 27 Jul 2005:
955 - Add support for AMCC PPC440EP/GR.
956 - Add support for AMCC Yosemite PPC440EP eval board.
957 - Add support for AMCC Yellowstone PPC440GR eval board.
958
Wolfgang Denk04a3cc12005-07-31 00:30:09 +0200959* Minor fixes for PPChameleon Board:
960 - fix alignment of NAND size
961 - make code do what the comment says
962
Wolfgang Denk1f207042005-07-30 16:45:16 +0200963* Implement h/w sector protection status synchronization at boot.
964 The code is provided for, and was tested on, the Yukon/Alaska
965 and PM520 boards only.
966
967 A bug in flash_real_protect() for the Yukon board was fixed by
968 adding a function that tells if two banks are on one flash chip.
969
Wolfgang Denk157b4f82005-07-28 10:42:26 +0200970* Fix sysmon POST problem: check I2C error codes
971 This fixes a problem of displaying bogus voltages when the voltages
972 are so low that the I2C devices start failing while the rest of the
973 system keeps running.
974
Wolfgang Denk9419a4f2005-07-28 01:50:14 +0200975* Patch by Cedric Vincent, 6 Jul 2005:
976 Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"
977
Wolfgang Denkcd0bf802005-07-21 16:14:36 +0200978* Patch by Jon Loeliger, 20 Jul 2005:
979 Add missing PCI IO port definitions.
980
Wolfgang Denk7d5b5222005-07-21 15:23:29 +0200981* Add CompactFlash support for HMI1001 board.
982
983* Adjust printed board ID for LWMON board.
984
Wolfgang Denk42a08182005-07-21 15:29:22 +0200985* Fix low-level OHCI transfers for ARM920t and MPC5xxx
986
Wolfgang Denk104866b2005-07-21 11:45:50 +0200987* Add new argument format for flash commands to allow for usage like
988 "erase $(addr) +$(filesize)", i. e. a size argument can be used and
989 U-Boot will automaticially find the end of the corresponding sector.
990
stroesee0138782005-07-05 11:35:27 +0000991* Patch by Stefan Roese, 5 Jul 2005:
992 Update uc100 board PHY setup
993
stroese046c4832005-07-01 15:53:57 +0000994* Patch by Stefan Roese, 1 Jul 2005:
995 Fix PHY address for CATcenter board (now correct!)
996
stroese3c890fe2005-06-30 13:06:07 +0000997* Patch by Stefan Roese, 30 Jun 2005:
998 Fix PHY addresses for PPChameleon and CATcenter boards
999 Change MAINTAINER for most esd boards
1000
wdenk2b9d1862005-07-04 00:03:16 +00001001* Patch by Detlev Zundel, 30 Jun 2005:
1002 Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
1003
wdenka2b932d2005-06-27 13:30:03 +00001004* Fix baudrate calculation problem on MPC5200 systems
1005
1006* Add EEPROM and RTC support for HMI1001 board
1007
1008* Patch by Detlev Zundel, 20 Jun 2005:
1009 Fix initialization of low active GPIO pins on inka4x0 board
1010
wdenkb6f9d3c2005-06-20 10:28:38 +00001011* Enable redundant environment, disable HW flash protection of
1012 HMI1001 board
1013
wdenkd1894de2005-06-20 10:17:34 +00001014* Patch by Travis Sawyer, 10 Jun 2005:
1015 Initialize allocated dev and private hw structures
1016 after their respective allocation in 440gx_enet.c
1017
1018* Patch by Steven Scholz, 10 Jun 2005:
1019 Fix byteorder problems with second argument of "bootm" with
1020 standalone images;
1021
wdenk8d414a72005-06-10 10:00:19 +00001022* Add support for HMI1001 board
1023
1024* Disable "date" and "sntp" commands on TQM866M
1025
wdenk5ceea262005-06-05 20:30:43 +00001026* Fix watchdog reset problems on LWMON board
1027
wdenkc28149c2005-05-30 23:55:42 +00001028* Patch by Juergen Selent, 17 May 2005:
1029 Add support for Funkwerk VoVPN gateway module.
1030
1031* Cleanup debug code for MPC8220 FEC driver
1032
wdenkf593f462005-05-23 10:49:50 +00001033* Extend burst mode RAM test program to take a loop count
1034 (0 = infinite)
1035
1036* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
1037 those boards that use it.
1038
wdenka21ad7b2005-05-19 22:39:42 +00001039* Patches by Greg Ungerer, 19 May 2005:
1040 - add support for the KS8695P (ARM 922 based) CPU
1041 - add support for the OpenGear CM4008, CM4116 and CM4148 boards
1042
1043* Patch by Steven Scholz, 19 May 2005:
1044 Add support for CONFIG_SERIAL_TAG on ARM boards
1045
wdenk5c71a7a2005-05-16 15:23:22 +00001046* Add PCI support for Sorcery board.
1047 Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
1048
wdenk4e5bc872005-05-16 14:19:49 +00001049* Fix compile problems caused by new burst mode SDRAM test;
1050 make port pins to trigger logic analyzer configurable
1051
wdenkf3da7cc2005-05-13 22:49:36 +00001052* Fix timer handling on MPC85xx systems
1053
wdenka7316b02005-05-12 22:48:09 +00001054* Fix debug code in omap5912osk flash driver
1055
1056* Add support for MPC8247 based "IDS8247" board.
1057
wdenk827aad32005-05-10 15:51:35 +00001058* Add support for 2 x TSEC interfaces on the TQM8540 board.
1059
wdenkeb8f2fb2005-05-09 10:17:32 +00001060* On LWMON we must use the watchdog to reset the board as the CPU
1061 genereated HRESET pulse is too short to reset the external
1062 circuitry.
1063
wdenke339a7a2005-05-07 19:06:32 +00001064* Add test tool to exercise SDRAM accesses in burst mode
1065 (as standalone program, MPC8xx/PowerPC only)
1066
wdenk757e8892005-05-05 09:13:21 +00001067* Increase CFG_MONITOR_LEN for Rattler board to match actual code
1068 size.
1069
wdenke84ec902005-05-05 00:04:14 +00001070* Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
wdenkb85efc22005-05-05 09:51:44 +00001071 March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI
1072 added to support LZO and LZARI compression modes (undefined by
1073 default).
wdenke84ec902005-05-05 00:04:14 +00001074
wdenke02d2ae2005-05-04 23:50:54 +00001075* Fix problem with symbolic links in JFFS2 code.
1076
wdenkcc0e8782005-05-04 23:44:59 +00001077* Use linker ASSERT statement to prevent undetected overlapping of
1078 sections on PPChameleon board; other boards might use this, too.
1079
stroeseecfc2932005-05-03 06:19:57 +00001080* Patch by Stefan Roese, 03 May 2005:
1081 Update for P3G4
1082 Fix problems in cmd_universe.c
1083
1084* Patch by Matthias Fuchs, 03 May 2005:
1085 Added missing variable declaration in cmd_nand.c
1086 Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
1087
wdenk8c61fe52005-04-22 15:09:09 +00001088* Fix INKA4x0: use CS1 as gpio_wkup_6 output
1089
wdenkfaaa6022005-04-21 21:10:22 +00001090* Fix bug in the SDRAM initialization code for canmb, IceCube and
1091 PM520 boards.
1092 Fix PHY address for canmb board.
1093
wdenk5fa47792005-04-20 14:38:59 +00001094* Cleanup serial console baudrate calculation on AT91RM9200;
1095 get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
wdenkf4569932005-04-20 12:36:05 +00001096
stroesec4b78982005-04-20 06:52:40 +00001097* Patch by Matthias Fuchs, 18 Apr 2005:
1098 Make PCI target address spaces on PMC405 and CPCI405 boards
1099 configurable via environment variables
1100
wdenkb21608e2005-04-20 09:28:54 +00001101* Auto-size RAM on canmb board.
1102
wdenkf1d0ff42005-04-13 23:15:10 +00001103* Add support for canmb board
1104
stroesee6f6b172005-04-13 10:08:39 +00001105* Patch by Stefan Roese, 13 Apr 2005:
1106 Update for esd apc405
1107
wdenkd0245fc2005-04-13 10:02:42 +00001108* Fixes for TQM8560 board:
1109 - fix clock rates
1110 - remove debug messages
1111 - fix flash sector protection
1112
wdenk10164c62005-04-07 22:36:40 +00001113* Patch by Steven Scholz, 07 Apr 2005:
1114 Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C
1115
wdenkd0245fc2005-04-13 10:02:42 +00001116* Patches by Steven Scholz, 07 Apr 2005:
wdenk10164c62005-04-07 22:36:40 +00001117 Fix compiler warning in altera.c
wdenkd0245fc2005-04-13 10:02:42 +00001118 Fix warning in cpu/arm920t/at91rm9200/i2c.c
wdenk10164c62005-04-07 22:36:40 +00001119
1120* Patch by Ladislav Michl, 06 Apr 2005:
1121 Fix voiceblue configuration.
1122
stroese180e6f12005-04-07 05:35:12 +00001123* Patch by Stefan Roese, 06 Apr 2005:
1124 Updates for OCOTEA board:
1125 - Changed U-Boot size from 512kByte to 256kByte
1126 - Fixed flash driver to support boot from soldered user flash
1127 - Added README for switch from PIBS firmware to U-Boot
1128
1129* Patch by Travis Sawyer, 05 Apr 2005:
1130 - Change timer frequency for ppc 440 from 10 ms to 1 ms.
1131 Problem found by Andrew Wozniak.
1132
wdenk91fcc952005-04-06 13:52:31 +00001133* Patch by Steven Scholz, 06 Apr 2005:
1134 - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
1135 - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
1136
wdenk2a831612005-04-06 00:04:16 +00001137* Patches by Robert Whaley, 29 Nov 2004:
1138 - update the pxa-regs.h file for PXA27x chips
1139 - add PXA27x based ADSVIX board
1140 - add support for MMC on PXA27x processors
1141
1142* Patch by Andrew E. Mileski, 28 Nov 2004:
1143 Fix PPC4xx SPD SDRAM detection bug
1144
1145* Patch by Hiroshi Ito, 26 Nov 2004:
1146 Fix logic of "test -z" and "test -n" commands
1147
wdenke085e5b2005-04-05 23:32:21 +00001148* Patch by Ladislav Michl, 05 Apr 2005:
1149 Add support for VoiceBlue board.
1150
1151* Patch by Ladislav Michl, 05 Apr 2005:
1152 Fix netboot_common() prototypes.
1153
wdenk915b3762005-04-05 22:30:50 +00001154* Patch by Steven Scholz, 05 Apr 2005:
1155 Use i.MX watchdog timer for reset_cpu()
1156
1157* Patch by Steven Scholz, 05 Apr 2005:
1158 Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
1159 subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
1160 (now in interupts.c)
1161
wdenkccfe25d2005-04-05 21:57:18 +00001162* Add support for MPC8220 based "sorcery" board.
1163
1164* Add support for TQM8560 board.
wdenk8e5263c2005-04-05 16:26:47 +00001165
wdenkf41ff3b2005-04-04 23:43:44 +00001166* Add FEC support for TQM8540 board.
1167 Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
1168
1169* Patch by Martin Krause, 04 Apr 2005:
1170 Update default configuration for CMC_PU2 board.
1171
wdenkc2a84292005-04-04 12:23:03 +00001172* Patch by Steven Scholz, 04 Apr 2005:
wdenk3d3d99f2005-04-04 12:44:11 +00001173 - remove all references to CONFIG_INIT_CRITICAL for ARM based boards
1174 - introduce two new configuration options instead:
1175 CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
1176
1177* Patch by Steven Scholz, 04 Apr 2005:
wdenkc2a84292005-04-04 12:23:03 +00001178 Make sure that MDIO clock does not exceed 2.5 MHz on AT91
1179
wdenk7af1f9d2005-04-04 12:08:28 +00001180* Fix timer code for ARM systems: make sure that udelay() does not
1181 reset timers so it's save to use udelay() in timeout code.
1182
wdenk6f1ff382005-04-03 23:35:57 +00001183* Patch by Mathias Küster, 23 Nov 2004:
1184 add udelay support for the mcf5282 cpu
1185
1186* Patch by Tolunay Orkun, 16 November 2004:
1187 fix incorrect onboard Xilinx CPLD base address
wdenke085e5b2005-04-05 23:32:21 +00001188
wdenk874c6752005-04-03 23:22:21 +00001189* Patch by Jerry Van Baren, 08 Nov 2004:
1190 - Add low-boot option for MPC8260ADS board (if lowboot is selected,
1191 the jumper for the HRCW source should select flash. If lowboot is
1192 not selected, the jumper for the HRCW source should select the
1193 BCSR.
1194 - change default load base address to 0x00400000
1195
wdenkbc3202a2005-04-03 23:11:38 +00001196* Patch by Yuli Barcohen, 08 Nov 2004:
1197 Add support for Analogue & Micro Rattler boards.
1198 Tested on Rattler8248.
1199
1200* Patch by Andre Renaud, 08 Nov 2004:
1201 Fix watchdog support in common/lcd.c
1202
1203* Patch by Marc Leeman, 05 Nov 2003:
1204 Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
1205 bug only affects the XPC8245 processors
1206
wdenk6d3c6d12005-04-03 22:35:21 +00001207* Patches by Josef Wagner, 29 Oct 2004:
1208 - Add support for MicroSys CPU87 board
1209 - Add support for MicroSys PM854 board
1210
1211* Patch by Jian Zhang, 02 Nov 2004:
1212 Add 16-bit NAND support
1213
wdenk1873b602005-04-03 21:11:16 +00001214* Patch by Scott McNutt, 01 Nov 2004:
1215 Add missing NIOS/NIOS2 support for "iminfo" command
1216
1217* Patch by Detlev Zundel, 29 Oct 2004:
1218 Add missing NIOS/NIOS2 support for "mkimage" tool.
1219
wdenk6148e742005-04-03 20:55:38 +00001220* Patch by David Adair, 27 Oct 2004:
1221 Add missing 440GX SDRAM Controller reset
1222
wdenk1e8d0c52005-04-03 17:23:39 +00001223* Patch by Steven Scholz, 25 Oct 2004:
1224 Declare reset_cpu() in include/common.h instead locally
1225
wdenke0c812a2005-04-03 15:51:42 +00001226* Patch by Yusdi Santoso, 22 Oct 2004:
1227 - Add support for HIDDEN_DRAGON board
1228 - fix endianess problem in driver/rtl1839.c
1229
1230* Patch by Allen Curtis, 21 Oct 2004:
1231 support multiple serial ports
1232
wdenkfa66e932005-04-03 14:52:59 +00001233* Patch by Richard Klingler, 03 Apr 2005:
1234 Add call to eth_halt() in net/net.c when called functions fail
1235 after eth_init() has been called.
1236
1237* Patch by Sam Song, 3 April 2005:
1238 - Update README.Netconsole
1239 - Update README
1240
wdenk336b2bc2005-04-02 23:52:25 +00001241* Prepare for SoC rework of ARM code:
1242 - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL
1243 - rename memsetup into lowlevel_init (function name and source files)
wdenkf9c57a22005-04-03 14:26:46 +00001244 Patch by Steven Scholz, 03 Apr 2005:
1245 - create SoC specific directories include/asm-arm/arch-imx and
1246 include/asm-arm/arch-s3c24x0
wdenk336b2bc2005-04-02 23:52:25 +00001247
wdenk8d5d28a2005-04-02 22:37:54 +00001248* Fix problems with SNTP support;
1249 enable SNTP support in some boards.
1250
wdenk9773ef92005-04-01 15:18:44 +00001251* Patches by Martin Krause, 01 Apr 2005:
1252 - Fix flash erase timeout on CMC_PU2
1253 - Add automatic HW detection for CMC_PU2 and CMC_BASIC
wdenk279b2dd2005-04-01 09:29:14 +00001254
wdenk65ec1102005-04-01 09:14:58 +00001255* Patch by Steven Scholz, 13 March 2005:
1256 fix cache enabling for AT91RM9200
1257
wdenkb4ad9622005-04-01 00:25:43 +00001258* Patch by Masami Komiya, 30 Mar 2005:
1259 add SNTP support and expand time server and time offset fields of
1260 DHCP support. See doc/README.SNTP
1261
1262* Patch by Steven Scholz, 13 Dec 2004:
1263 Fix bug in at91rm920 ethernet driver
1264
wdenk0af9d012005-03-31 23:44:33 +00001265* Patch by Steven Scholz, 13 Dec 2004:
1266 Remove duplicated code by merging memsetup.S files for
1267 at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
1268
wdenk61c636e2005-03-31 18:42:15 +00001269* Patch by Detlev Zundel, 31 Mar 2005:
1270 Cleanup duplicate definition of overwrite_console()
1271
1272* Update TQM5200 configuration;
1273 prepare for Rev. 200 starter kit boards
1274
wdenk194b8392005-03-30 23:28:18 +00001275* Patch by Scott McNutt, 21 Oct 2004:
1276 Add support for Nios-II EPCS Controller core.
1277
1278* Patch by Scott McNutt, 20 Oct 2004:
1279 Nios-II cleanups:
1280 - Add sysid command (Nios-II only).
1281 - Locate default exception trampoline at proper offset.
1282 - Implement I/O routines (readb, writeb, etc)
1283 - Implement do_bootm_linux
1284
wdenka5948882005-03-27 23:41:39 +00001285* Patches by Martin Krause, 22 Mar 2005:
1286 - use TQM5200_auto as MAKEALL target for TQM5200 systems
1287 - add support for SM501 graphics controller
1288 - add support for graphic console on TQM5200
1289 - add support for TQM5200 Rev 200
1290 - cleanup, fix typo in include/configs/TQM5200.h
1291
wdenkff86b722005-03-20 22:33:46 +00001292* Patch by Manfred Baral, 17 Mar 2005:
1293 Fix typo
1294
wdenk6601db22005-03-17 16:43:10 +00001295* Fix RTC configuration for PPChameleon board
1296
1297* Cleanup, fix typo in include/configs/TQM5200.h
1298
stroesee72a7b72005-03-16 20:58:31 +00001299* Patch by Stefan Roese, 16 Mar 2005:
1300 Update for esd auto_update and hh405 board
1301
wdenk8d3d9ed2005-03-16 16:32:26 +00001302* Adapt for U-Boot image size (new features enabled) on TQM5200
1303
wdenk3f3262b2005-03-15 22:56:53 +00001304* Update code for TQM8540 board (and 85xx in general):
1305 - Change the name of the Ethernet driver: MOTO ENET -> ENET
1306 - Reformat boot messages
1307 - Enable redundant environment
1308 - Replace the -O2 optimization flag with -mno-string
1309
wdenkbfad55d2005-03-14 23:56:42 +00001310* Patch by David Brownell, 10 Mar 2005:
1311 Restore copyright statements in OHCI drivers.
1312
1313* Add support for TQM8540 board
1314
wdenka8121e62005-03-14 23:01:03 +00001315* Patch by Detlev Zundel, 14 Mar 2005:
1316 NC650: changed NAND flash addressing to using UPMB
1317
1318* Patch by Stefan Roese, 14 Mar 2005:
stroese4c3d80c2005-03-14 12:56:21 +00001319 Update for esd voh405 fpga image
1320
wdenkf189a0d2005-03-14 13:14:58 +00001321* INKA4x0: Allow initialization of LCD backlight dimming from
1322 "brightness" environment variable.
1323
wdenkb995b0f2005-03-06 01:21:30 +00001324* Add port initialization for digital I/O on INKA4x0
1325
wdenka8121e62005-03-14 23:01:03 +00001326* Patch by Stefan Roese, 01 Mar 2005:
stroesec86a0c82005-03-01 17:26:39 +00001327 Update for esd boards dp405 and hub405
1328
wdenk286dca82005-03-04 11:27:31 +00001329* Fix get_partition_info() parameter error in all other calls
1330 (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).
1331
1332* Enable USB and IDE support for INKA4x0 board
1333
wdenka8121e62005-03-14 23:01:03 +00001334* Patch by Andrew Dyer, 28 Feb 2005:
wdenk286dca82005-03-04 11:27:31 +00001335 fix ext2load passing an incorrect pointer to get_partition_info()
1336 resulting in load failure for devices other than 0
1337
wdenk62fea7e2005-02-27 23:46:58 +00001338* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
1339
wdenkacd05362005-02-24 23:23:29 +00001340* Cleanup USB and partition defines
1341
wdenk99408ba2005-02-24 22:44:16 +00001342* Add support for ext2 filesystems and image timestamps to TQM5200 board
1343
1344* Add reset code for Coral-P on INKA4x0 board
1345
1346* Patch by Martin Krause, 28 Jun 2004:
1347 Update for TRAB board.
1348
1349* Fix some missing "volatile"s in MPC5xxx FEC driver
1350
wdenkb22532e2005-02-07 19:44:17 +00001351* Fix cirrus voltage detection (for CPC45)
1352
wdenkc233db82005-02-04 15:38:08 +00001353* Fix byteorder problem in usbboot and scsiboot commands.
1354
wdenkb7345fc2005-02-04 15:02:06 +00001355* Patch by Cajus Hahn, 04 Feb 2005:
1356 - don't insist on leading '/' for filename in ext2load
1357 - set default partition to useful value (1) in ext2load
1358
1359* Patch by Andrew Dyer, 08 Jan 2005:
1360 fix wrong return codes in ext2 code
1361
wdenkf1276d42005-02-03 23:00:49 +00001362* Removed '--no-warn-mismatch' option from Makefile. This option
1363 makes 'ld' to overlook binary objects compatibility.
1364
1365* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
1366 --end-group) outside of the group. This will make 'ld' to do
1367 _multiple_ search in the library group when resolving symbol
1368 references and do only a _single_ seach in libgcc.a after the group
1369 search.
1370
1371* Fix stability problems on CPC45 board again.
1372
1373* Make image detection for diskboot / usbboot / scsiboot more robust
1374 (also check header checksum)
1375
wdenk81414462005-01-31 22:09:11 +00001376* Update CPC45 board configuration.
1377
1378* Add USB and PCI support for INKA4x0 board
1379
wdenkf6925c72005-01-22 18:26:04 +00001380* Fix IDE stability problems on CPC45 board (needs 2 x EIEIO).
1381
wdenk525d7b62005-01-22 18:13:04 +00001382* Code cleanup
1383
wdenkc86cdb92005-01-12 00:38:03 +00001384* Patch by Robin Getz, 13 Oct 2004:
1385 Add standalone application to change SMC91C111 MAC addresses,
1386 see examples/README.smc91111_eeprom
1387
1388* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
1389 Fix Flash support for ARM Integrator CP.
1390
wdenkcb99da52005-01-12 00:15:14 +00001391* Patch by Richard Woodruff, 10 Jan 2005:
1392 Update support for OMAP2420 (ARM11) and H4 board:
1393 o clean up and add new types to H4 memory probe code.
1394 o fix to work with internal boot.
1395 o added PRCM config III operation.
1396 o fix marginal flash timings.
1397 o add revison ATAG usage.
1398 o enable voltage scaling at power chip.
1399 o fix compile error for i2c.
1400
1401* Fix network problem (error when receiving multiple ARP packets)
1402
1403* Patch by Daniel Poirot, 12 Oct 2004:
wdenkd3341052005-01-09 23:48:14 +00001404 Add support for Wind River sbc405 board
1405
1406* Patch by Rainer Brestan, 12 Oct 2004:
1407 Make examples/Makefile more robust
1408
wdenk91a4f362005-01-09 23:33:49 +00001409* Patch by Sam Song, 11 October 2004:
1410 - Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
1411 - Adjust CPU:BUS frequency ratio 1:1 when core frequency
1412 less than 50MHz
1413
1414* Patch by Sam Song, 10 Oct 2004:
1415 Fix a parameter error in run_command() in main.c
1416
1417* Patch by Richard Woodruff, 01 Oct 2004:
wdenkf8062712005-01-09 23:16:25 +00001418 add support for the TI OMAP2420 processor and its H4 reference
1419 board
1420
1421* Patch by Christian Pellegrin, 24 Sep 2004:
1422 Added support for NE2000 compatible (DP8390, DP83902) NICs.
1423
wdenk96c7a8c2005-01-09 22:28:56 +00001424* Patch by Leif Lindholm, 23 Sep 2004:
1425 add support for the AMD db1550 board
1426
1427* Patch by Travis Sawyer, 15 Sep 2004:
1428 Add CONFIG_SERIAL_MULTI support for ppc4xx,
1429 update README.serial_multi
1430
wdenk68005192005-01-09 21:28:15 +00001431* Patches by David Snowdon, 07 Sep 2004:
1432 - add u-boot.hex target in the top level Makefile
1433 - add support for the UNSW/NICTA PLEB 2 board (pleb2)
1434 - use -mtune=xscale and -march=armv5 options for PXA
1435
wdenkc4cbd342005-01-09 18:21:42 +00001436* Patch by Florian Schlote, 08 Sep 2004:
1437 Add support for SenTec-COBRA5272-board (Coldfire).
1438
wdenk310b4fc2005-01-09 18:12:51 +00001439* Patch by Gleb Natapov, 07 Sep 2004:
1440 mpc824x: set PCI latency timer to a sane value
1441 (is 0 after reset).
1442
1443* Patch by Kurt Stremerch, 03 Sep 2004:
1444 Add bitstream configuration option for fpga command (Xilinx only).
1445
wdenk02ac0212005-01-09 17:19:34 +00001446* Patch by Kurt Stremerch, 03 Sep 2004:
1447 Add Xilinx Spartan2E family FPGA support
1448
1449* Patch by Jeff Angielski, 02 Sep 2004:
1450 Add Added support for H2 revision of the EP8260 board.
1451 Fixed formatting for some of the EP8260 related source files.
1452
wdenk26c58432005-01-09 17:12:27 +00001453* Patch by Jon Loeliger, 02 Sep 2004:
1454 Reset monitor size back to 256 so environment can be written
1455 to flash on MPC85xx ADS and CDS releases.
1456
1457* Patch by Paolo Broggini, 02 Sep 2004:
1458 Make BSS clearing on ARM systems more robust
1459
1460* Patch by Yue Hu and Joe, 01 Sep 2004:
1461 - add PCI support for ixp425;
1462 - add EEPRO100 suppor tfor ixdp425 board.
1463
1464* Fix problem with protected sector detection in driver/cfi_flash.c
1465
1466======================================================================
wdenk1b52e832005-01-02 17:02:54 +00001467Changes for U-Boot 1.1.2:
wdenk6c59edc2004-05-03 20:45:30 +00001468======================================================================
1469
wdenk54070ab2004-12-31 09:32:47 +00001470* Code cleanup, mostly for GCC-3.3.x
1471
1472* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
1473 pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
1474 additional ethernet addresses.
1475
1476* Cleanup drivers/i82365.c - avoid duplication of code
1477
1478* Fix bogus "cannot span across banks" flash error message
1479
1480* Code cleanup
1481
1482* Add support for CompactFlash for the CPC45 Board.
1483
wdenk7f5ad442004-12-19 21:39:27 +00001484* Fix problems with CMC_PU2 flash driver.
1485
wdenk11392db2004-12-19 09:58:11 +00001486* Cleanup:
1487 - avoid trigraph warning in fs/ext2/ext2fs.c
1488 - rename UC100 -> uc100
1489
wdenk51242782004-12-18 22:35:43 +00001490* Add support for UC100 board
1491
stroese91673152004-12-16 18:47:58 +00001492* Patch by Stefan Roese, 16 Dez 2004:
1493 - ext2fs support added
1494 - Tundra universe support added
1495 - Coldfire MCF5249 support added (no preloader needed!)
1496 - MCF5249 board TASREG added
1497 - PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405,
1498 VOM405, WUH405
1499 - some esd boards updated
1500 - memory commands "mdc" and "mwc" added for cyclic read/write
1501 (CONFIG_MX_CYCLIC, see README for further description)
1502
wdenk4ca32362004-12-16 15:52:40 +00001503* Add support for INKA4X0 board
1504
wdenk4025aab2004-12-13 00:18:44 +00001505* Patch by Steven Scholz, 12 Dec 2004:
1506 Fix typo in AT91 memory setup.
1507
wdenkdc130442004-12-12 22:06:17 +00001508* Patch by Martin Krause, 27 Oct 2004:
1509 - add support for "STK52xx" board (including PS/2 multiplexer)
1510 - add hardware detection for TQM5200
1511
wdenkb3a4a702004-12-10 11:40:40 +00001512* Clean up CMC PU2 flash driver
1513
1514* Update MAINTAINERS file
1515
1516* Fix bug in MPC823 LCD driver
1517
wdenkac40ade2004-11-24 23:35:19 +00001518* Fix udelay() on AT91RM9200 for delays < 1 ms.
1519
1520* Enable long help on CMC PU2 board;
1521 fix reset issue;
1522 increase CPU speed from 179 to 207 MHz.
1523
wdenk28375a72004-11-22 22:20:07 +00001524* Fix smc91111 ethernet driver for Xaeniax board (need to handle
1525 unaligned tail part specially).
1526
wdenk20dd2fa2004-11-21 00:06:33 +00001527* Update for AT91RM9200DK and CMC_PU2 boards:
1528 - Enable booting directly from flash
1529 - fix CMC_PU2 flash driver
1530
1531* Fix mkimage usage message
1532
wdenk2ff96812004-11-17 20:44:20 +00001533* Map SRAM on NC650 board
1534
wdenkce5b6a92004-11-02 13:00:33 +00001535* Work around for Ethernet problems on Xaeniax board
1536
wdenk337f5652004-10-28 00:09:35 +00001537* Patch by TsiChung Liew, 23 Sep 2004:
1538 - add support for MPC8220 CPU
1539 - Add support for Alaska and Yukon boards
1540
wdenk222f0632004-10-24 23:54:40 +00001541* Fix configuration for ERIC board (needs more room)
1542
1543* Adjust MIPS compiler options at run-time depending on tools version
1544 ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
1545 "-mcpu=4kc" for old tools)
1546
wdenka48ea0a2004-10-19 22:17:51 +00001547* Add passing of the command line and memory size information to the
1548 kernel on xaeniax board.
1549
wdenk27e628f2004-10-11 23:03:10 +00001550* Enable NAND flash support for NC650 board.
1551
1552* Patch by Thomas Lange 07 Oct 2004:
1553 Updated README for DBAu1x00 boards to match current status
1554
wdenkc3919532004-10-11 22:51:13 +00001555* Patch by Philippe Robin, 28 Sept 2004:
1556 Fix Flash support for Versatile.
1557
1558* Patch by Roger Blofeld, 16 Sep 2004:
1559 Fix timeout for DHCP command retry
1560
wdenk8f08c5b2004-10-11 22:43:02 +00001561* Patch by Pantelis Antoniou, 14 Sep 2004:
1562 Fix early serial hang when CONFIG_SERIAL_MULTI is defined.
1563
1564* Patch by Pantelis Antoniou, 14 Sep 2004:
1565 Kick watchdog when bz-decompressing
1566
wdenk61aa0612004-10-11 22:25:49 +00001567* Fix CFG_HZ problems on AT91RM9200 systems
1568 [Remember: CFG_HZ should be 1000 on ALL systems!]
1569
wdenk391b5742004-10-10 23:27:33 +00001570* Patch by Gridish Shlomi, 30 Aug 2004:
1571 - Add support to revA version of PQ27 and PQ27E.
1572 - Reverted MPC8260ADS baudrate back to original 115200
1573
1574* Patch by Hojin, 17 Sep 2004:
1575 Fix typo in cfi_flash.c
wdenk17b211b2004-10-11 23:10:30 +00001576
wdenk391b5742004-10-10 23:27:33 +00001577* Patch by Mark Jonas, 09 September 2004:
1578 mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
1579 error message
1580
1581* Patch by Mark Jonas, 31 August 2004:
1582 Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
1583 improves FTP performance for MPC5200 systems. Enabled for IceCube
1584 by default.
1585
wdenkadf849c2004-10-10 22:44:24 +00001586* Patch by Michael Bendzick, 30 Aug 2004:
1587 - Improve platform.S code for omap1510inn that detects whether code
1588 is running from SDRAM or not. Patch allows SDRAM to be configured
1589 if code is running out of SRAM at 0x20000000.
1590
1591* Patch by Frederick Klatt, 30 Aug 2004:
1592 Add support for the Wind River SBC8540/SBC8560 boards
1593
wdenke85b7a52004-10-10 22:16:06 +00001594* Configure SX1 board to use drivers/cfi_flash.c
1595
1596* Patches by Michael Bendzick, 30 Aug 2004:
1597 - Configure omap1510inn board to use drivers/cfi_flash.c
1598 - Make drivers/cfi_flash.c protect environment and redundant
1599 environment.
1600
1601* Patch by Steven Scholz, 23 Jun 2004:
1602 - Add script (tools/img2brec.sh) to programm U-Boot into
1603 (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
1604
wdenkef3386f2004-10-10 21:27:30 +00001605* Patches by Scott McNutt, 24 Aug 2004:
1606 - Add support for Altera Nios-II processors.
1607 - Add support for Psyent PCI-5441 board.
1608 - Add support for Psyent PK1C20 board.
1609
wdenk0aeb8532004-10-10 21:21:55 +00001610* Patches by Jon Loeliger, 24 Aug 2004:
1611 - Add support for the MPC8541 and MPC8555 CDS boards
1612 - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
1613 - Convert MPC85xxADS to use common CFI flash driver
wdenk0424e5d2004-10-10 20:23:57 +00001614 - Fix PCI window on MPC85xx; remove unneeded PCI initialization
1615 from board_early_init_f()
1616 - Provide SW workaround for PCI initialization on 85xx CDS
wdenk0424e5d2004-10-10 20:23:57 +00001617
wdenk8596ffd2004-10-10 18:49:14 +00001618* Patches by George G. Davis, 24 Aug 2004:
1619 - Enable ramdisk/initrd tagged param support for omap1610h2_config
1620 - Remove static network setup defaults from mx1ads_config
wdenk767fbd42004-10-10 18:41:04 +00001621 - update ARM boards to use constants from mach-types.h
1622
wdenkcbb52882004-10-10 18:03:33 +00001623* Patch by Gary Jennejohn, 04 Oct 2004:
1624 - fix I2C on at91rm9200
1625 - add support for Ricoh RS5C372A RTC
1626
wdenk70ae5b42004-10-10 17:05:18 +00001627* Patch by Gary Jennejohn, 01 Oct 2004:
1628 - add support for CMC PU2 board
1629 - add support for I2C on at91rm9200
1630
1631* Patch by Gary Jennejohn, 28 Sep 2004:
1632 fix baudrate handling on at91rm9200
1633
wdenk02075fd2004-10-09 23:33:42 +00001634* Patch by Yuli Barcohen, 22 Aug 2004:
1635 - remove ZPC.1900 board-specific flash driver;
1636 switch the port to generic CFI driver;
1637 - port clean-up
1638
wdenke4ef9e82004-10-09 23:28:40 +00001639* Patch by Hinko Kocevar, 21 Aug 2004:
1640 Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
1641
wdenk9ca7bbc2004-10-09 23:25:58 +00001642* Clean up tools/bmp_logo.c to not add trailing white space
1643
1644* Patch by Hinko Kocevar, 21 Aug 2004:
1645 - Group common framebuffer functions in common/lcd.c
1646 - Group common framebuffer macros and #defines in include/lcd.h
1647 - Provide calc_fbsize() for video ATAG
1648
wdenkfb30b4c2004-10-09 22:44:59 +00001649* Patch by Sam Song, 21 August 2004:
1650 - Fix a typo in README
1651 - Align "(RO)" output for "flinfo" after "protect on"
1652 - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
1653 ratio 1:1 when core frequency less than 50MHz
1654
wdenk9ca7bbc2004-10-09 23:25:58 +00001655* Patches by Hinko Kocevar, 21 Aug 2004:
wdenk5fa9b392004-10-09 22:32:26 +00001656 - fix some "use of label at end of compound statement" warnings
1657 - Define type of LCD panel on lubbock board if CONFIG_LCD is used
1658
wdenkf8e9a232004-10-09 22:21:29 +00001659* Patch by Steven Scholz, 16 Aug 2004:
1660 - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
1661 - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
1662 - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
1663 - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
1664 into cpu/arm920t/$(SOC)/
1665
wdenk57bfdd42004-09-29 22:55:14 +00001666* Patches by Sean Chang, 09 Aug 2004:
1667 - Added support for both 8 and 16 bit mode access to System ACE CF
1668 through MPU.
1669 - Fixed missing System ACE CF device during get FAT partition info
1670 in fat_register_device function.
1671 - Enabled System ACE CF support on ML300.
1672
1673* Patch by Sean Chang, 09 Aug 2004:
1674 Synch defines for saveenv and do_saveenv functions so they get
1675 compiled under the same statement.
1676
1677* Patch by Sean Chang, 09 Aug 2004:
wdenk97e8bda2004-09-29 22:43:59 +00001678 - Added I2C support for ML300.
1679 - Added support for ML300 to read out its environment information
1680 stored on the EEPROM.
1681 - Added support to use board specific parameters as part of
1682 U-Boot's environment information.
1683 - Updated MLD files to support configuration for new features
1684 above.
1685
wdenk57bfdd42004-09-29 22:55:14 +00001686* Patches by Travis Sawyer, 05 Aug 2004:
wdenk97e8bda2004-09-29 22:43:59 +00001687 - Remove incorrect bridge settings for eth group 6
1688 - Add call to setup bridge in ppc_440x_eth_initialize
1689 - Fix ppc_440x_eth_init to reset the phy only if its the
1690 first time through, otherwise, just check the phy for the
1691 autonegotiated speed/duplex. This allows the use of netconsole
1692 - only print the speed/duplex the first time the phy is reset.
1693
wdenk7d1eb822004-09-29 11:02:56 +00001694* Patch by Shlomo Kut, 29 Mar 2004:
1695 Add support for MKS Instruments "Quantum" board
1696
1697* Fix build problem with Cogent boards;
1698 avoid using <asm/byteorder.h> when using the host compiler
1699
wdenkd9ee50d2004-09-28 21:51:42 +00001700* Patch by Ganapathi C, 04 Aug 2004:
1701 Fix NFS timeout issue
1702
wdenk99651602004-09-28 21:39:45 +00001703* Patch by Yuli Barcohen, 19 Jul 2004:
1704 - Fix host tools building in Cygwin environment
1705 - Fix header files search order for host tools
1706
1707* Patch by Tom Armistead, 19 Jul 2004:
1708 Fix kgdb.S support for 74xx_75x cpu
1709
wdenka9799ed2004-09-28 21:26:26 +00001710* Patch by Jon Loeliger, 15 Jul 2004:
1711 Fix MPC85xx I2C driver
1712
wdenke2d6d742004-09-28 20:34:50 +00001713* Fix problems with CDROM drive as slave device on Lite5200 IDE bus.
1714
wdenk5b835a32004-09-28 19:00:19 +00001715* Patch by Stephen Williams, 15 July 2004
1716 Set the PCI class code for JSE board as part of PCI interface setup
1717
1718* Patch by Michael Bendzick, 15 Jul 2004:
1719 Fix problem with writes with odd sizes in drivers/cfi_flash.c when
1720 CFG_FLASH_USE_BUFFER_WRITE is set
1721
wdenk20bddb32004-09-28 17:59:53 +00001722* Patch by Yuli Barcohen, 13 Jul 2004:
1723 Allow clock setting on MPC866/MPC885 series chips according to
1724 environment variable `cpuclk'
1725
1726* Patch by Yuli Barcohen, 20 Apr 2004:
1727 Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
1728
wdenkfa89d7c2004-09-28 16:44:41 +00001729* Patch by Vincent Dubey, 24 Sep 2004:
1730 Add support for xaeniax board
1731
wdenkdee058f2004-09-27 20:20:11 +00001732* Add comment about non-GPL character of standalone applications to
1733 COPYING file
1734
1735* Fix FEC ethernet problem on NSCU board.
1736
wdenkb2fc7e12004-09-21 23:33:32 +00001737* Patch by Gary Jennejohn, 09 Sep 2004:
1738 allow to use USART1 as console port on at91rm9200dk boards
1739
stroesea7a4df32004-09-16 12:37:13 +00001740* Patch by Stefan Roese, 16 Sep 2004:
1741 Update AR405 board.
1742
wdenk9e7130b2004-09-09 17:44:35 +00001743* Fix SysClk handling for PPChameleon and CATcenter boards
1744
wdenka0ebde52004-09-08 22:03:11 +00001745* Patch by Detlev Zundel, 08 Sep 2004:
1746 Update etags build target
1747
1748* Improve NetConsole support: add support for broadcast destination
1749 address and buffered input.
1750
1751* Cleanup compiler warnings for GCC 3.3.x and later
1752
1753* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
1754
wdenk0bbcbd22004-08-28 22:45:57 +00001755* Add support for IDS "NC650" board
1756
wdenk79cf7572004-08-28 21:09:14 +00001757* Add automatic update support for LWMON board
1758
1759* Clear Block Lock-Bits when erasing flash on LWMON board.
1760
1761* Fix return code of "fatload" command
1762
1763* Enable MSDOS/VFAT filesystem support for LWMON board
1764
wdenkda54bc92004-08-04 21:56:49 +00001765* Patch by Martin Krause, 03 Aug 2004:
1766 change timing for SM501 graphics controller on TQM5200 module
1767
1768* Patch by Mark Jonas, 13 July 2004:
1769 - Total5200 LCD now run in little endian mode. Endianess conversion
1770 is done in hardware.
wdenk0bbcbd22004-08-28 22:45:57 +00001771 - Removed last reference to "console" environment variable.
wdenkda54bc92004-08-04 21:56:49 +00001772
wdenk6e44b0f2004-08-02 23:39:03 +00001773* Patches by Lars Munch, 12 Jul 2004:
1774 - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
1775 board specific
1776 - split out the LXT971A PHY from ns_9750_eth.h
1777 - split the dm9161 phy part out of at91rm9200_ether.c
1778
wdenkda04a8b2004-08-02 23:22:59 +00001779* Patch by Andreas Engel, 12 Jul 2004:
1780 Replaced hardcoded PL011 clock frequency with config variable.
1781 Fixed wrong CONFIG_CMD_DFL doc.
1782
1783* Patch by Thomas Viehweger, 09 Jun 2004:
1784 make it possible to remove chpart when there is only one partition
1785
wdenkb8fb6192004-08-02 21:11:11 +00001786* Add support for console over UDP (compatible to Ingo Molnar's
1787 netconsole patch under Linux)
1788
wdenk492b9e72004-08-01 23:02:45 +00001789* Patch by Jon Loeliger, 16 Jul 2004:
1790 - support larger DDR memories up to 2G on the PC8540/8560ADS and
1791 STXGP3 boards
1792 - Made MPC8540/8560ADS be 33Mhz PCI by default.
1793 - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
1794 and CONFIG_L2_INIT_RAM options.
1795 - Refactor Local Bus initialization out of SDRAM setup.
1796 - Re-implement new version of LBC11/DDR11 errata workarounds.
1797 - Moved board specific PCI init parts out of CPU directory.
1798 - Added TLB entry for PCI-1 IO Memory
1799 - Updated README.mpc85xxads
1800
wdenk7ac16102004-08-01 22:48:16 +00001801* Patch by Sascha Hauer, 28 Jun:
1802 - add generic support for Motorola i.MX architecture
1803 - add support for mx1ads, mx1fs2 and scb9328 boards
1804
1805* Patches by Marc Leeman, 23 Jul 2004:
1806 - Add define for the PCI/Memory Buffer Configuration Register
1807 - corrected comments in cpu/mpc824x/cpu_init.c
1808
1809* Add support for multiple serial interfaces
1810 (for example to allow modem dial-in / dial-out)
1811
stroese5a668712004-07-15 14:41:43 +00001812* Patch by Stefan Roese, 15 Jul 2004:
1813 cpu/ppc4xx/sdram.c rewritten now using get_ram_size()
1814
wdenk3cc599e2004-08-01 13:09:47 +00001815* Fix NSCU config; add ethernet wakeup code.
1816
wdenk7ac16102004-08-01 22:48:16 +00001817* Add link for preloader for Motorola Coldfire to README.m68k
wdenk3cc599e2004-08-01 13:09:47 +00001818
wdenkbac38cb2004-07-12 22:34:51 +00001819* Patch by Michael Bendzick, 12 Jul 2004:
1820 fix output formatting in drivers/cfi_flash.c
1821
wdenk973f6332004-07-12 14:37:59 +00001822* Patch by Mark Jonas, 02 Jul 2004:
1823 Fix lowboot (again) on MPC5xxx
1824
wdenkfa366cc2004-07-11 22:27:55 +00001825* Patch by Curt Brune, 07 Jul 2004:
1826 relocate exception vectors on arm720t if needed
1827
wdenk82db02f2004-07-11 22:19:26 +00001828* Patch by George G. Davis, 06 Jul 2004:
1829 - update mach-types.h to latest arm.linux.org.uk master list
1830 - Set correct OMAP1610 bi_arch_number for build target
1831
1832* Patch by Curt Brune, 06 Jul 2004:
1833 evb4510: add support for timer interrupt; cleanup
1834
wdenka8c13d42004-07-11 21:49:42 +00001835* Patch by Dan Poirot, 06 Jul 2004:
1836 Fix sbc8260 environment variables
1837
1838* Cleanup redundand "console" environment variable
1839
wdenk7dd13292004-07-11 20:04:51 +00001840* Patch by Mark Jonas, 05 Jul 2004:
1841 add support for the Total5100's and Total5200's LCD screen
1842
1843* Patches by Dan Eisenhut, 01 Jul 2004:
1844 - README fixes.
1845 - Move doc2000.h include to prevent compiler warning on some boards
1846
wdenkcc3f8a92004-07-11 19:17:20 +00001847* Patch by Mark Jonas, 01 Jul 2004:
1848 Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
1849 MGT5100 and MPC5200 based Freescale platforms.
1850
wdenk361f4a22004-07-11 18:10:30 +00001851* Patch by Philippe Robin, 01 Jul 2004:
1852 Add initialization for Integrator and versatile board files.
1853
1854* Patch by Hinko Kocevar, 01 Jun 2004:
1855 Fix VFD FB allocation, add LCD FB allocation on ARM
1856
wdenk64519362004-07-11 17:40:54 +00001857* Patch by Martin Krause, 30 Jun 2004:
1858 Add support for TQM5200 board
1859
1860* Patch by Martin Krause, 29 Jun 2004:
1861 Add loopw command: infinite write loop on address range
1862
wdenk20a61222004-07-10 23:48:41 +00001863* Patches by Yasushi Shoji, 29 Jun 2004:
1864 - add empty include/asm-microblaze/processor.h
1865 - add to CREDITS and MAINTAINERS
1866 - add gd initialization
1867 - add MicroBlaze and SUZAKU board to MAKEALL script
1868 - add reset support for SUZAKU
1869 - add flush_cache() for MicroBlaze
1870 - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
1871 size flash memory on SUZAKU
1872
wdenkb5bb1392004-07-10 23:11:10 +00001873* Patch by Prakash Kumar, 27 Jun 2004:
1874 Add support for the PXA250 based Intrinsyc Cerf board.
1875
1876* Patch by Yasushi Shoji, 27 Jun 2004:
1877 fix comment in include/common.h
1878
wdenk265d2172004-07-10 22:35:59 +00001879* Rename SBC8560 into sbc8560 for consistency
1880
1881* Patch by Daniel Poirot, 24 Jun 2004:
1882 Add support for Wind River's sbc8240 board
1883
1884* Patches by Yasushi Shoji, 26 Jun 2004:
1885 - drivers/serial_xuartlite.c: fix "return 0" in void function
1886 - add microblaze support to mkimage tool
1887
wdenk3203c8f2004-07-10 21:45:47 +00001888* Patch by Fred Klatt, 25 Jun 2004:
wdenk265d2172004-07-10 22:35:59 +00001889 Add support for WindRiver's sbc8560 board
wdenk3203c8f2004-07-10 21:45:47 +00001890
1891* Patch by Nicolas Lacressonniere, 24 Jun 2004
1892 Small Bugs fixes for "at91rm9200dk" board:
1893 - Timing modifications for SPI DataFlash access
1894 - Fix NAND flash detection bug
1895
1896* Patch by Nicolas Lacressonniere, 24 Jun 2004:
1897 Add Support for Flash AT49BV6416 for AT91RM9200DK board
1898
wdenk13eb2212004-07-09 23:27:13 +00001899* Patch by Jon Loeliger, 17 June 2004:
1900 Completion of the 8540ADS/8560ADS updates:
1901 Fix some PCI and Rapid I/O memory maps,
1902 Initialize both TSEC 1 and 2,
1903 Initialize SDRAM
1904 Update MAINTAINER for 85xx boards and README.mpc85xxads
1905
wdenkec5dc0d2004-07-09 22:51:01 +00001906* Patch by Yuli Barcohen, 16 Jun 2004:
1907 Remove obsolete AdderII port which was superseded by unified
1908 AdderII/Adder87x port
1909
1910* Patch by Ladislav Michl, 16 Jun 2004:
1911 Fix gcc-3.3.3 warnings for smc91111.c
1912
stroeseaa192712004-07-02 14:38:26 +00001913* Patch by Stefan Roese, 02 Jul 2004:
1914 - Fix bug in 405 ethernet driver; allocated data not cleared!
1915 - Fix problem in 405 i2c driver; don't try to print without console!
1916
wdenk3ea95e42004-07-01 22:02:29 +00001917* Patch by Paul Ruhland, 11 Jun 2004:
1918 Remove debug code from 'board/lpd7a40x/flash.c'
1919
wdenk99874b42004-07-01 21:40:08 +00001920* Patch by Andrea Marson, 11 Jun 2004:
1921 Update for PPChameleon board:
1922 - support for SysClk @ 25MHz
1923 - support for Silicon Motion SM712 VGA controller
1924 - some clean ups
1925
wdenk3337af42004-07-01 20:28:03 +00001926* Patches by Richard Woodruff, 10 Jun 2004:
1927 - fix problems with examples/stubs.c for GCC >= 3.4
1928 - fix problems with gd initialization
1929
wdenkf2140d52004-07-01 16:30:44 +00001930* Patch by Curt Brune, 17 May 2004:
1931 - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
1932 - Add support for ESPD-Inc. EVB4510 Board
1933
1934* Patch by Marc Leeman, 11 May 2004:
1935 Fix for MPC8245 - reading PPC Memory from another device with the
1936 PPC as PCI target device corrupts data due to interenal hardware
1937 buffering.
1938
wdenk01686632004-06-30 22:59:18 +00001939* Fix "cls" command when used with splash screen
1940
1941* Increase NFS download timeout (now 1 min - 10 sec is to short for a
1942 slow download of a big image)
1943
wdenk0811ded2004-06-25 23:35:58 +00001944* Add "cls" function to MPC823 LCD driver so we can reinitialize the
1945 display even after showing a bitmap
1946
wdenk9e930b62004-06-19 21:19:10 +00001947* Patch by Josef Wagner, 04 Jun 2004:
1948 - DDR Ram support for PM520 (MPC5200)
1949 - support for different flash types (PM520)
1950 - USB / IDE / CF-Card / DiskOnChip support for PM520
1951 - 8 bit boot rom support for PM520/CE520
1952 - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
1953 - I2C and RTC support for CPC45
1954 - support of new flash type (28F160C3T) for CPC45
1955
wdenk9e076902004-06-17 18:50:45 +00001956* Fix flash parameters passed to Linux for PPChameleon board
1957
1958* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
1959
wdenk37bdfdf2004-06-10 21:55:33 +00001960* Patch by Paul Ruhland, 10 Jun 2004:
wdenk9e930b62004-06-19 21:19:10 +00001961 fix support for Logic SDK-LH7A404 board and clean up the
wdenk37bdfdf2004-06-10 21:55:33 +00001962 LH7A404 register macros.
1963
1964* Patch by Matthew McClintock, 10 Jun 2004:
1965 Modify code to select correct serial clock on Sandpoint8245
1966
wdenkefc6f362004-06-10 21:34:36 +00001967* Patch by Robert Schwebel, 10 Jun 2004:
1968 Add support for Intel K3 strata flash.
1969
1970* Patch by Thomas Brand, 10 Jun 2004:
1971 Fix "loads" command on DK1S10 board
1972
wdenk9f664dd2004-06-09 21:50:45 +00001973* Patch by Yuli Barcohen, 09 Jun 2004:
wdenk5b1e6142004-06-09 21:54:22 +00001974 Add support for 8MB flash SIMM and JFFS2 file system on
1975 Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).
1976
1977* Patch by Yuli Barcohen, 09 Jun 2004:
wdenk9f664dd2004-06-09 21:50:45 +00001978 Add support for Analogue&Micro Adder87x and the older AdderII board.
1979
1980* Patch by Ming-Len Wu, 09 Jun 2004:
1981 Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
1982
wdenkec432742004-06-09 21:04:48 +00001983* Patch by Sam Song, 09 Jun 2004:
1984 - Add support for RPXlite_DW board
1985 - Update FLASH driver for 4*AM29DL323DB90VI
1986 - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
1987
wdenk2d644822004-06-09 17:45:32 +00001988* Patch by Mark Jonas, 08 June 2004:
1989 - Make MPC5200 boards evaluate the SVR to print processor name and
1990 version in checkcpu() (cpu/mpc5xxx/cpu.c).
1991
1992* Patch by Kai-Uwe Bloem, 06 May 2004:
1993 Fix endianess problem in cramfs code
1994
wdenkaeba06f2004-06-09 17:34:58 +00001995* Patch by Tom Armistead, 04 Jun 2004:
1996 Add support for MAX6900 RTC
1997
1998* Patches by Ladislav Michl, 03 Jun 2004:
1999 - fix cfi_flash.c on LE systems
2000 - let 'make mrproper' delete u-boot.img as well
2001 - turn printf into debug in cfi_flash.c
2002
wdenk51108172004-06-09 15:37:23 +00002003* Patch by Kurt Stremerch, 28 May 2004:
2004 Add support for Exys XSEngine board
2005
wdenk604b7a12004-06-09 15:29:49 +00002006* Patch by Martin Krause, 27 May 2004:
2007 Fix a MPC5xxx I2C timing issue in i2c_probe().
2008
2009* Patch by Leif Lindholm, 27 May 2004:
2010 Fix board_init_f() for dbau1x00 board.
2011
wdenk920e91b2004-06-09 15:25:53 +00002012* Patch by Imre Deak, 26 May 2004:
2013 On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
2014 Set flash base accordingly, and decide whether to do or skip board
2015 specific setup steps.
2016
2017* Patch by Josef Baumgartner, 26 May 2004:
2018 Add missing define in include/asm-m68k/global_data.h
2019
wdenkd11115a2004-06-09 15:24:18 +00002020* Patch by Josef Baumgartner, 25 May 2004:
2021 Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c
2022
2023* Patch by Paul Ruhland, 24 May 2004:
2024 fix SDRAM initialization for LPD7A400 board.
2025
wdenk79b59372004-06-09 14:58:14 +00002026* Patch by Jian Zhang, 20 May 2004:
2027 add support for environment in NAND flash
2028
wdenk76dd6c72004-06-09 14:47:54 +00002029* Patch by Yuli Barcohen, 20 May 2004:
2030 Add support for Interphase iSPAN boards.
2031
2032* Patches by Paul Ruhland, 17 May 2004:
2033 - Add I/O functions to the smc91111 ethernet driver to support the
2034 Logic LPD7A40x boards.
wdenk3c711762004-06-09 13:37:52 +00002035 - Add support for the Logic Zoom LH7A40x based SDK board(s),
2036 specifically the LPD7A400.
2037
2038* Patches by Robert Schwebel, 15 May 2004:
2039 - call MAC address reading code also for SMSC91C111;
2040 - make SMSC91C111 timeout configurable, remove duplicate code
2041 - fix get_timer() for PXA
2042 - update doc/README.JFFS2
2043 - use "bootfile" env variable also for jffs2
2044
wdenk7e920de2004-06-09 12:47:02 +00002045* Patch by Tolunay Orkun, 14 May 2004:
2046 Add support for Cogent CSB472 board (8MB Flash Rev)
2047
wdenk6568eaa2004-06-09 12:42:26 +00002048* Patch by Thomas Viehweger, 14 May 2004:
2049 - flash.h: more flash types added
2050 - immap_8260.h: some bits added (useful for RMII)
2051 - cmd_coninfo.c: typo corrected, printf -> puts
2052 - reduced size by replacing spaces with tab
2053
wdenk0359dde2004-06-09 10:15:00 +00002054* Patch by Robert Schwebel, 13 May 2004:
2055 Add 'imgextract' command: extract one part of a multi file image.
2056
wdenkcc245992004-06-09 00:51:50 +00002057* Patches by Jon Loeliger, 11 May 2004:
wdenka445ddf2004-06-09 00:34:46 +00002058 Dynamically handle REV1 and REV2 MPC85xx parts.
2059 (Jon Loeliger, 10-May-2004).
2060 New consistent memory map and Local Access Window across MPC85xx line.
2061 New CCSRBAR at 0xE000_0000 now.
2062 Add RAPID I/O memory map.
2063 New memory map in README.MPC85xxads
2064 (Kumar Gala, 10-May-2004)
2065 Better board and CPU identification on MPC85xx boards at boot.
2066 (Jon Loeliger, 10-May-2004)
2067 SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
2068 Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
2069 (Jim Robertson, 10-May-2004)
2070 Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
2071 Supports multiple PHYs.
2072 (Andy Fleming, 10-May-2004)
2073 Some README.MPC85xxads updates.
2074 (Kumar Gala, 10-May-2004)
2075 Copyright updates for "Freescale"
2076 (Andy Fleming, 10-May-2004)
2077
wdenk96fe0d32004-06-09 00:15:33 +00002078* Patch by Stephen Williams, 11 May 2004:
2079 Add flash support for ST M29W040B
2080 Reduce JSE specific flash.c to remove dead code.
2081
wdenk7f1447f2004-06-09 00:10:59 +00002082* Patch by Markus Pietrek, 04 May 2004:
2083 Fix clear_bss code for ARM systems (all except s3c44b0 which
2084 doesn't clear BSS at all?)
2085
2086* Fix "ping" problem on INC-IP board. Strange problem:
2087 Sometimes the store word instruction hangs while writing to one of
2088 the Switch registers, but only if the next instruction is 16-byte
2089 aligned. Moving the instruction into a separate function somehow
2090 makes the problem go away.
2091
wdenk914be132004-06-08 00:22:43 +00002092* Patch by Rishi Bhattacharya, 08 May 2004:
2093 Add support for TI OMAP5912 OSK Board
2094
2095* Patch by Sam Song May, 07 May 2004:
2096 Fix typo of UPM table for rmu board
2097
2098* Patch by Pantelis Antoniou, 05 May 2004:
wdenkc4e854f2004-06-07 23:46:25 +00002099 - Intracom board update.
2100 - Add Codec POST.
2101
wdenk2a6109c2004-06-06 23:53:59 +00002102* Add support for the second Ethernet interface for the 'PPChameleon'
2103 board.
2104
wdenke3a06802004-06-06 23:13:55 +00002105* Patch by Dave Peverley, 30 Apr 2004:
2106 Add support for OMAP730 Perseus2 Development board
2107
2108* Patch by Alan J. Luse, 29 Apr 2004:
2109 Fix flash chip-select (OR0) option register setting on FADS boards.
2110
2111* Patch by Alan J. Luse, 29 Apr 2004:
2112 Report MII network speed and duplex setting properly when
2113 auto-negotiate is not enabled.
2114
2115* Patch by Jarrett Redd, 29 Apr 2004:
2116 Fix hang on reset on Ocotea board due to flash in wrong mode.
2117
wdenk6b1aa8d2004-06-06 22:11:41 +00002118* Patch by Dave Peverley, 29 Apr 2004:
2119 add MAC address detection to smc91111 driver
2120
2121* Patch by David Müller, 28 Apr 2004:
2122 fix typo in lib_arm/board.c
2123
wdenk0e2bd9c2004-06-06 21:51:03 +00002124* Patch by Tolunay Orkun, 20 Apr 2004:
2125 - README update: add CONFIG_CSB272 and csb272_config
2126 - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
2127 i2cfast environment variable
2128
wdenka7556b22004-06-06 21:35:06 +00002129* Patch by Yuli Barcohen, 19 Apr 2004:
2130 - Rename DUET_ADS to MPC885ADS
2131 - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
2132 - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
2133 - Clean up FADS family port to use the new defines
2134
wdenkf8c590b2004-06-01 21:08:17 +00002135* Fix PCI support on CPC45 board
2136
wdenke4adb352004-05-19 21:33:14 +00002137* Patch by Scott McNutt, 25 Apr 2004:
2138 Add Nios GDB/JTAG Console support:
2139 - Add stubs to support gdb via JTAG.
2140 - Add support for console over JTAG.
2141 - Minor cleanup.
2142
wdenkbb33bab2004-05-13 13:23:58 +00002143* Add support for CATcenter board (based on PPChameleon ME module)
2144
wdenke07ec1b2004-05-12 22:54:36 +00002145* Patch by Klaus Heydeck, 12 May 2004:
2146 Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
2147 load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
2148 various changes to KUP4 board specific files
2149
wdenkaf143832004-05-12 22:18:31 +00002150* Fix minor network problem on MPC5200: need some delay between
2151 resetting the PHY and sending the first packet. Implemented in a
2152 "natural" way by invoking the PHY reset and initialization code
2153 only once after power on vs. each time the interface is brought up.
2154
wdenkbd8cf2f2004-05-11 21:53:55 +00002155* Add some limited support for low-speed devices to SL811 USB controller
2156 (at least "usb reset" now passes successfully and "usb info" displays
2157 correct information)
2158
wdenk63a10be2004-05-08 20:33:20 +00002159* Change init sequence for multiple network interfaces: initialize
2160 on-chip interfaces before external cards.
2161
wdenkf248ebc2004-05-05 19:44:41 +00002162* Fix memory leak in the NAND-specific JFFS2 code
2163
2164* Fix SL811 USB controller when attached to a USB hub
2165
wdenk50fc90c2004-05-05 08:31:53 +00002166* Fix config option spelling in PM520 config file
2167
2168* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
2169 patches by Pantelis Antoniou, 30 Mar 2004)
2170
wdenk6c59edc2004-05-03 20:45:30 +00002171* Fix minor NAND JFFS2 related issue
2172
2173* Fixes for SL811 USB controller:
2174 - implement workaround for broken memory stick
2175 - improve error handling
2176
2177* Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better
2178 cope with congested networks.
2179
2180======================================================================
wdenk33591052004-04-12 14:31:43 +00002181Changes for U-Boot 1.1.1:
2182======================================================================
wdenk12490652004-04-18 21:13:41 +00002183
wdenk7ad5e4c2004-04-25 15:41:35 +00002184* Patch by Travis Sawyer, 23 Apr 2004:
2185 Fix VSC/CIS 8201 phy descrambler interoperability timing due to
2186 errata from Vitesse Semiconductor.
wdenk7b370962004-04-25 14:37:29 +00002187
2188* Patch by Philippe Robin, 22 Apr 2004:
wdenke07ec1b2004-05-12 22:54:36 +00002189 Fix ethernet configuration for "versatile" board
wdenk7b370962004-04-25 14:37:29 +00002190
2191* Patch by Kshitij Gupta, 21 Apr 2004:
2192 Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards
2193
2194* Patch by Steven Scholz, 24 Feb 2004:
2195 Fix a bug in AT91RM9200 ethernet driver:
2196 The MII interface is now initialized before accessing the PHY.
2197
wdenk656140b2004-04-25 13:18:40 +00002198* Patch by John Kerl, 19 Apr 2004:
2199 Use U-boot's miiphy.h for PHY register names, rather than
2200 introducing a new header file.
2201
2202* Update pci_ids.h from linux-2.4.26
2203
2204* Patch by Masami Komiya, 19 Apr 2004:
2205 Fix problem cause by VLAN function on little endian architecture
2206 without VLAN environment
2207
wdenkc78bf132004-04-24 23:23:30 +00002208* Clean up the TQM8xx_YYMHz configurations; allow to use the same
wdenk656140b2004-04-25 13:18:40 +00002209 binary image for all clock frequencies. Implement run-time
wdenkc78bf132004-04-24 23:23:30 +00002210 optimization of flash access timing based on the actual bus
2211 frequency.
2212
wdenk20c98a62004-04-23 20:32:05 +00002213* Modify KUP4X board configuration to use SL811 driver for USB memory
2214 sticks (including FAT / VFAT filesystem support)
2215
2216* Add SL811 Host Controller Interface driver for USB
2217
2218* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
2219
2220* Patch by Pantelis Antoniou, 19 Apr 2004:
2221 Allow to use shell style syntax (i. e. ${var} ) with standard parser.
2222 Minor patches for Intracom boards.
2223
2224* Patch by Christian Pell, 19 Apr 2004:
2225 cleanup support for CF/IDE on PCMCIA for PXA25X
2226
wdenke44b9112004-04-18 23:32:11 +00002227* Temporarily disabled John Kerl's extended MII command code because
2228 "miivals.h" is missing
2229
2230* Patches by Mark Jonas, 13 Apr 2004:
2231 - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
2232 - Add sync instructions to IceCube SDRAM init code
2233 - Move SDRAM chip constants into seperate include files
2234 - Unify DDR and SDR initialization code
2235 - Unify all IceCube (Lite5xxx) target names
2236
wdenk61066ec2004-04-18 22:57:51 +00002237* Patch by John Kerl, 16 Apr 2004:
2238 Enable ranges in mii command, e.g. mii read 0-1f 0 or
2239 mii read 4-7 18-1a. Also add mii dump subcommand for
2240 pretty-printing standard regs 0-5.
2241
2242* Patch by Stephen Williams, 16 April 2004:
2243 fix typo in JSE.h; update MAINTAINERS
2244
wdenk19c8fb72004-04-18 22:26:17 +00002245* Patch by Matthew S. McClintock, 14 Apr 2004:
2246 fix initdram function for utx8245 board
2247
2248* Patch by Markus Pietrek, 14 Apr 2004:
2249 use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag
2250
2251* Patch by Reinhard Meyer, 18 Apr 2004:
2252 provide the IDE Reset Function for EMK 5200 boards
2253
2254* Patch by Masami Komiya, 12 Apr 2004:
2255 fix pci_hose_write_config_{byte,word}_via_dword problems
2256
wdenka6270482004-04-18 22:03:42 +00002257* Patch by Sangmoon Kim, 12 Apr 2004:
2258 Update max RAM size for debris board
2259
2260* Patch by Travis Sawyer, 08 Apr 2004:
2261 Add TLB entry for second DIMM slot on ocotea
2262
2263* Patch by Masami Komiya, 08 Apr 2004:
2264 add RTL8169 network driver
2265
wdenk78924a72004-04-18 21:45:42 +00002266* Patch by Dan Malek, 07 Apr 2004:
2267 - Add support for RPC/STx GP3, Motorola 8560 board
2268 - Update 85xx TSEC driver so it searches MII for first available PHY
2269 and uses that one.
2270 - Add functions to support console MII commands.
2271
2272* Patch by Tolunay Orkun, 07 Apr 2004:
wdenka6270482004-04-18 22:03:42 +00002273 Move initialization of bi_iic_fast[]
wdenk78924a72004-04-18 21:45:42 +00002274 from board_init_f() to board_init_r()
2275
2276* Patch by Yasushi Shoji, 07 Apr 2004:
2277 Cleanup microblaze port
2278
2279* Patch by Sangmoon Kim, 07 Apr 2004:
2280 Add auto SDRAM module detection for Debris board
2281
wdenk792c44a2004-04-18 21:17:30 +00002282* Patch by Rune Torgersen, 06 Apr 2004:
2283 - Fix some PCI problems on the MPC8266ADS board
2284 - Fix the location of some PCI entries in the immap structure
2285
wdenk12490652004-04-18 21:13:41 +00002286* Patch by Yasushi Shoji, 07 Apr 2004:
2287 - add support for microblaze processors
2288 - add support for AtmarkTechno "suzaku" board
2289
wdenk8886a662004-04-18 19:43:36 +00002290* Configure PPChameleon board to use redundand environment in flash
2291
2292* Configure PPChameleon board to use JFFS2 NAND support.
2293
2294* Added support for JFFS2 filesystem (read-only) on top of NAND flash
2295
wdenk05939202004-04-18 17:39:38 +00002296* Patch by Rune Torgersen, 16 Apr 2004:
2297 LBA48 fixes
wdenk33591052004-04-12 14:31:43 +00002298
wdenk6203e402004-04-18 10:13:26 +00002299* Patches by Pantelis Antoniou, 16 Apr 2004:
2300 - add support for a new version of an Intracom board and fix
2301 various other things on others.
2302 - add verify support to the crc32 command (define
2303 CONFIG_CRC32_VERIFY to enable it)
2304 - fix FEC driver for MPC8xx systems:
2305 1. fix compilation problems for boards that use dynamic
2306 allocation of DPRAM
2307 2. shut down FEC after network transfers
2308 - HUSH parser fixes:
2309 1. A new test command was added. This is a simplified version of
2310 the one in the bourne shell.
2311 2. A new exit command was added which terminates the current
2312 executing script.
2313 3. Fixed handing of $? (exit code of last executed command)
wdenk05939202004-04-18 17:39:38 +00002314 - Fix some compile problems;
2315 add "once" functionality for the netretry variable
wdenk6203e402004-04-18 10:13:26 +00002316
wdenke5cda752004-04-15 23:23:39 +00002317* Patch by George G. Davis, 02 Apr 2004:
2318 add support for Intel Assabet board
2319
wdenk634d2f72004-04-15 23:14:49 +00002320* Patch by Stephen Williams, 01 Apr 2004:
2321 Add support for Picture Elements JSE board
2322
2323* Patch by Christian Pell, 01 Apr 2004:
2324 Add CompactFlash support for PXA systems.
2325
wdenk3902d702004-04-15 18:22:41 +00002326* Patches by Pantelis Antoniou, 30 Mar 2004:
2327 - add auto-complete support to the U-Boot CLI
2328 - add support for NETTA and NETPHONE boards; fix NETVIA board
wdenk61642172004-04-15 21:16:42 +00002329 - add support for the Epson 156x series of graphical displays
2330 (These displays are serial and not suitable for using a normal
2331 framebuffer console on them)
2332 - add infrastructure needed in order to POST any DSPs in a board
wdenke7047de2004-04-15 21:31:56 +00002333 - improve and fix various things in the MPC8xx FEC driver:
2334 1. The new 87x and 88x series of processors have two FECs,
2335 and the new driver supports them both.
2336 2. Another change in the 87x/88x series is support for
2337 the RMII (Reduced MII) interface. However numerous
2338 changes are needed to make it work since the PHYs
2339 are connected to the same lines. That means that
2340 you have to address them correctly over the MII
2341 interface.
2342 3. We now correctly match the MII/RMII interface
2343 configuration to what the PHY reports.
wdenk145d2c12004-04-15 21:48:45 +00002344 - Fix problem when readingthe MII status register. Due to the
2345 internal design of many PHYs you have to read the register
2346 twice. The problem is more apparent in 10Mbit mode.
2347 - add new mode ".jffs2s" for reading from a NAND device: it just
2348 skips over bad blocks.
2349 - add networking support for VLANs (802.1q), and CDP (Cisco
2350 Discovery Protocol)
wdenk270a8bd2004-04-15 21:58:11 +00002351 - some minor patches / cleanup
wdenk3902d702004-04-15 18:22:41 +00002352
2353* Patch by Yuli Barcohen, 28 Mar 2004:
2354 - Add support for MPC8272 family including MPC8247/8248/8271/8272
2355 - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
2356 - Change configuration method for MPC8260ADS family
2357
wdenk2fb73902004-04-12 16:12:49 +00002358* add startup code to clear the BSS of standalone applications
2359
wdenk33591052004-04-12 14:31:43 +00002360* Fix if / elif handling bug in HUSH shell
2361
2362======================================================================
wdenka9f01392004-04-10 20:44:51 +00002363Changes for U-Boot 1.1.0:
wdenk87249ba2004-01-06 22:38:14 +00002364======================================================================
2365
wdenka09491a2004-04-08 22:31:29 +00002366* Patch by Mark Jonas: Remove config.tmp files only when
2367 unconfiguring the board
2368
2369* Adapt RMU board for bigger flash memory
2370
wdenk65faef92004-03-25 19:29:38 +00002371* Patch by Klaus Heydeck, 13 Mar 2003:
2372 Add support for KUP4X Board
2373
wdenk4d01d9e2004-03-25 14:59:05 +00002374* Patch by Pavel Bartusek, 21 Mar 2004
2375 Add Reiserfs support
2376
2377* Patch by Hinko Kocevar, 20 Mar 2004
2378 - Add auto-release for SMSC LAN91c111 driver
2379 - Add save/restore of PTR and PNR regs as suggested in datasheet
2380
wdenkeec9a3d2004-03-23 23:20:24 +00002381* Patch by Stephen Williams, 19 March 2004
2382 Increase speed of sector reads from SystemACE,
2383 shorten poll timeout and remove a useless reset
2384
2385* Patch by Tolunay Orkun, 19 Mar 2004:
2386 Make GigE PHY 1000Mbps Speed/Duplex detection conditional
2387 (CONFIG_PHY_GIGE)
2388
2389* Patch by Brad Kemp, 18 Mar 2004:
2390 prevent machine checks during a PCI scan
2391
2392* Patch by Pierre Aubert, 18 Mar 2004:
2393 Fix string cleaning in IDE identification
2394
wdenkaea86e42004-03-23 22:53:55 +00002395* Patch by Pierre Aubert, 18 Mar 2004:
2396 - Unify video mode handling for Chips & Technologies 69000 Video
2397 chip and Silicon Motion SMI 712/710/810 Video chip
2398 - Add selection of the video output (CRT or LCD) via 'videoout'
2399 environment variable for the Silicon Motion
2400 - README update
2401
2402* Patch by Pierre Aubert, 18 Mar 2004:
2403 include/common.h typo fix
2404
2405* Patches by Tolunay Orkun, 17 Mar 2004:
2406 - Add support for bd->bi_iic_fast[] initialization via environment
2407 variable "i2cfast" (CONFIG_I2CFAST)
2408 - Add "i2cfast" u-boot environment variable support for csb272
2409
wdenk8d4d1f62004-03-23 22:37:33 +00002410* Patch by Carl Riechers, 17 Mar 2004:
2411 Ignore '\0' characters in console input for use with telnet and
2412 telco pads.
2413
2414* Patch by Leon Kukovec, 17 Mar 2004:
2415 typo fix for strswab prototype #ifdef
2416
wdenk42c05472004-03-23 22:14:11 +00002417* Patches by Thomas Viehweger, 16 Mar 2004:
2418 - show PCI clock frequency on MPC8260 systems
2419 - add FCC_PSMR_RMII flag for HiP7 processors
2420 - in do_jffs2_fsload(), take load address from load_addr if not set
2421 explicit, update load_addr otherwise
2422 - replaced printf by putc/puts when no formatting is needed
2423 (smaller code size, faster execution)
2424
wdenkf16b5162004-03-23 21:43:07 +00002425* Patch by Phillippe Robin, 16 Mar 2004:
2426 avoid dereferencing NULL pointer in lib_arm/armlinux.c
2427
2428* Patch by Stephen Williams, 15 Mar 2004:
2429 Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation
2430
2431* Patch by Tolunay Orkun, 15 Mar 2004:
2432 Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()
2433
2434* Patch by Travis Sawyer, 15 Mar 2004:
2435 Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port
2436
wdenkc12081a2004-03-23 20:18:25 +00002437* Add start-up delay to make sure power has stabilized before
2438 attempting to switch on USB on SX1 board.
2439
2440* Patch by Josef Wagner, 18 Mar 2004:
2441 - Add support for MicroSys XM250 board (PXA255)
2442 - Add support for MicroSys PM828 board (MPC8280)
2443 - Add support for 32 MB Flash on PM825/826
2444 - new SDRAM refresh rate for PM825/PM826
2445 - added support for MicroSys PM520 (MPC5200)
2446 - replaced Query by Identify command in CPU86/flash.c
2447 to support 28F160F3B
2448
2449* Fix wrap around problem with udelay() on ARM920T
2450
2451* Add support for Macronix flash on TRAB board
2452
wdenk18bd81e2004-03-17 01:13:07 +00002453* Patch by Pierre Aubert, 15 Mar 2004:
2454 Fix buffer overflow in IDE identification
2455
2456* Fix power-off of LCD for out-of-band temperatures on LWMON board
2457
2458* Remove redundand #define in IceCube.h
2459
wdenk0ef49462004-03-15 09:00:01 +00002460* Patch by Steven Scholz, 27 Feb 2004:
2461 - Adding get_ticks() and get_tbclk() for AT91RM9200
2462 - Many white space fixes in cpu/at91rm9200/interrupts.c
2463
2464* Patches by Steven Scholz, 20 Feb 2004:
2465 some cleanup in AT91RM9200 related code
2466
wdenked2ac4b2004-03-14 18:23:55 +00002467* Patches by Travis Sawyer, 12 Mar 2004:
2468 - Fix Gigabit Ethernet support for 440GX
2469 - Add Gigabit Ethernet Support to MII PHY utilities
2470
2471* Patch by Brad Kemp, 12 Mar 2004:
2472 Fixes for drivers/cfi_flash.c:
2473 - Better support for x8/x16 implementations
2474 - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
2475 - Added defines for AMD command and address constants
2476
2477* Patch by Leon Kukovec, 12 Mar 2004:
2478 Fix get_dentfromdir() to correctly handle deleted dentries
wdenkc35ba4e2004-03-14 22:25:36 +00002479
wdenked2ac4b2004-03-14 18:23:55 +00002480* Patch by George G. Davis, 11 Mar 2004:
2481 Remove hard coded network settings in TI OMAP1610 H2
2482 default board config
2483
2484* Patch by George G. Davis, 11 Mar 2004:
2485 add support for ADS GraphicsClient+ board.
2486
wdenk18bd81e2004-03-17 01:13:07 +00002487* Patch by Pierre Aubert, 11 Mar 2004:
wdenke55402c2004-03-14 16:51:43 +00002488 - add bitmap command and splash screen support in cfb console
2489 - add [optional] origin in the bitmap display command
2490
2491* Patch by Travis Sawyer, 11 Mar 2004:
2492 Fix ocotea board early init interrupt setup.
2493
2494* Patch by Thomas Viehweger, 11 Mar 2004:
2495 Remove redundand code; add PCI-specific bits to include/mpc8260.h
2496
wdenke28cf632004-03-14 15:20:55 +00002497* Patch by Stephan Linz, 09 Mar 2004
2498 - Add support for the SSV ADNP/ESC1 (Nios Softcore)
2499
2500* Patch by George G. Davis, 9 Mar 2004:
2501 fix recent build failure for SA1100 target
2502
2503* Patch by Travis Sawyer, 09 Mar 2004:
2504 Support native interrupt mode for the IBM440GX.
2505 Previously it was running in 440GP compatibility mode.
2506
wdenk4989f872004-03-14 15:06:13 +00002507* Patch by Philippe Robin, 09 Mar 2004:
2508 Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
2509 Platform support.
2510
2511* Patch by Masami Komiya, 08 Mar 2004:
2512 Don't overwrite server IP address or boot file name
2513 when the boot server does not return values
2514
wdenk18bd81e2004-03-17 01:13:07 +00002515* Patch by Tolunay Orkun, 5 Mar 2004:
wdenk4989f872004-03-14 15:06:13 +00002516 Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
2517
wdenk369d43d2004-03-14 14:09:05 +00002518* Patch by Tolunay Orkun, 5 Mar 2004:
2519 Fix early board initialization for Cogent CSB272 board
2520
2521* Patch by Ed Okerson, 3 Mar 2004:
2522 fix CFI flash writes for little endian systems
2523
2524* Patch by Reinhard Meyer, 01 Mar 2004:
2525 generalize USB and IDE support for MPC5200 with according
2526 changes to IceCube.h and TOP5200.h
2527 add Am29LV256 256 MBit FLASH support for TOP5200 boards
2528 add info about USB and IDE to README
2529
wdenkacd9b102004-03-14 00:59:59 +00002530* Patch by Yuli Barcohen, 4 Mar 2004:
2531 Fix problems with GCC 3.3.x which changed handling of global
2532 variables explicitly initialized to zero (now in .bss instead of
2533 .data as before).
2534
2535* Patch by Leon Kukovec, 02 Mar 2004:
2536 add strswab() to fix IDE LBA capacity, firmware and model numbers
2537 on little endian machines
2538
2539* Patch by Masami Komiya, 02 Mar 2004:
2540 - Remove get_ticks() from NFS code
2541 - Add verification of RPC transaction ID
2542
2543* Patch by Pierre Aubert, 02 Mar 2004:
2544 cleanup for IDE and USB drivers for MPC5200
2545
2546* Patch by Travis Sawyer, 01 Mar 2004:
wdenk00fe1612004-03-14 00:07:33 +00002547 Ocotea:
2548 - Add IBM PPC440GX Ref Platform support (Ocotea)
2549 Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
2550 Adapted to U-Boot and 440GX port
2551 440gx_enet.c:
2552 - Add gracious handling of all Ethernet Pin Selections for 440GX
2553 - Add RGMII selection for Cicada CIS8201 Gigabit PHY
2554 ppc440.h:
2555 - Add needed bit definitions
2556 - Fix formatting
2557
2558* Patch by Carl Riechers, 1 Mar 2004:
2559 Add PPC440GX prbdv0 divider to fix memory clock calculation.
2560
2561* Patch by Stephan Linz, 27 Feb 2004
2562 - avoid problems for targets without NFS download support
2563
wdenkf602aa02004-03-13 23:29:43 +00002564* Patch by Rune Torgersen, 27 Feb 2004:
2565 - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
2566 - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
2567 - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
2568
2569* Patch by Masami Komiya, 27 Feb 2004:
2570 Fix rarpboot: add autoload by NFS
2571
2572* Patch by Dan Eisenhut, 26 Feb 2004:
2573 fix flash_write return value in saveenv
2574
2575* Patch by Stephan Linz, 11 Dec 2003
2576 expand config.mk to avoid trigraph warnings on NIOS
2577
2578* Rename "BMS2003" board into "HMI10"
2579
wdenk05822bf2004-03-12 15:38:25 +00002580* SX1 patches: use "serial#" for USB serial #; use redundand environment
2581 storage; auto-set console on USB port (using preboot command)
2582
wdenk29e7f5a2004-03-12 00:14:09 +00002583* Add support for SX1 mobile phone; add support for USB-based console
2584 (enable with "setenv stdout usbtty; setenv stdin usbtty")
2585
wdenk0a12b752004-03-11 22:46:36 +00002586* Fix LOWBOOT configuration for MPC5200 with DDR memory
2587
wdenk0e2874cb2004-03-02 14:05:39 +00002588* Fix SDRAM timings for LITE5200 / IceCube board
2589
2590* Handle Auti-MDIX / connection status for INCA-IP
2591
2592* Fix USB problems when attempting to read 0 bytes
2593
wdenk372f0302004-02-27 08:21:54 +00002594* Patch by Travis Sawyer, 26 Feb 2004:
2595 Fix broken compile for XPEDITE1K target.
2596
2597* Patch by Stephan Linz, 26 Feb 2004:
2598 Bug fix for NFS code on NIOS targets
wdenk29e7f5a2004-03-12 00:14:09 +00002599
wdenk372f0302004-02-27 08:21:54 +00002600* Patch by Stephen Williams, 26 Feb 2004:
2601 Break up SystemACE reads of large block counts
2602
wdenk6ea1cf02004-02-27 08:20:54 +00002603* Patch by Pierre Aubert, 26 Feb 2004
2604 add IDE support for MPC5200
2605
2606* Patch by Masami Komiya, 26 Feb 2004:
2607 add autoload via NFS
2608
2609* Patch by Stephen Williams
2610 Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
2611 elsewhere in the source.
2612
wdenkd729d302004-02-27 00:07:27 +00002613* Patch by Steven Scholz, 25 Feb 2004:
2614 - Timeouts in FPGA code should be based on CFG_HZ
2615 - Minor cleanup in code for Altera FPGA ACEX1K
2616
2617* Patch by Steven Scholz, 25 Feb 2004:
2618 Changed "Directory Hierarchy" section in README
2619
2620* Patch by Masami Komiya, 25 Feb 2004:
2621 Reduce copy count in nfs_read_reply() of NFS code
2622
wdenk5f495752004-02-26 23:46:20 +00002623* Patch by Markus Pietrek, 24 Feb 2004:
2624 NS9750 DevBoard added
2625
wdenk6ea1cf02004-02-27 08:20:54 +00002626* Patch by Pierre Aubert, 24 Feb 2004
wdenk5f495752004-02-26 23:46:20 +00002627 add USB support for MPC5200
2628
2629* Patch by Steven Scholz, 24 Feb 2004:
2630 - fix MII commands to use values from last command
2631
2632* Patch by Torsten Demke, 24 Feb 2004:
2633 Add support for the eXalion platform (SPSW-8240, F-30, F-300)
2634
wdenkdb82c8e2004-02-26 23:01:04 +00002635* Patch by Rahul Shanbhag, 19 Feb 2004:
2636 Fixes for for OMAP1610 board:
2637 - shift some IRQ specific code to platform.S file
2638 - remove duplicatewatchdog reset code from start.S
2639
2640* Make Auto-MDIX Support configurable on INCA-IP board
2641
2642* Fix license for mkimage tool
2643
wdenk77ef4c62004-02-24 22:33:21 +00002644* Patch by Masami Komiya, 24 Feb 2004:
2645 Update NetBootFileXferSize in NFS code
2646
2647* Patch by Scott McNutt, 24 Feb 2004:
2648 fix packet length in NFS code
2649
wdenkbe9c1cb2004-02-24 02:00:03 +00002650* Patch by Masami Komiy, 22 Feb 2004:
2651 Add support for NFS for file download
2652
wdenkb98ac282004-02-24 00:16:43 +00002653* Patch by Andrea Scian, 17 Feb 2004:
2654 Add support for S3C44B0 processor and DAVE B2 board
2655
2656* Patch by Steven Scholz, 20 Feb 2004:
2657 - Add support for MII commands on AT91RM9200 boards
2658 - some cleanup in AT91RM9200 ethernet code
2659
wdenke537b3b2004-02-23 23:54:43 +00002660* Patch by Peter Ryser, 20 Feb 2004:
2661 Add support for the Xilinx ML300 platform
2662
2663* Patch by Stephan Linz, 17 Feb 2004:
2664 Fix watchdog support for NIOS
2665
2666* Patch by Josh Fryman, 16 Feb 2004:
2667 Fix byte-swapping for cfi_flash.c for different bus widths
2668
2669* Patch by Jon Diekema, 14 Jeb 2004:
2670 Remove duplicate "FPGA Support" notes from the README file
2671
wdenke97d3d92004-02-23 22:22:28 +00002672* Patches by Reinhard Meyer, 14 Feb 2004:
2673 - update board/emk tree; use common flash driver
2674 - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
2675 [adapted for other PPC CPUs -- wd]
2676 - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
2677
2678* Patch by Jon Diekema, 13 Feb 2004:
2679 Call show_boot_progress() whenever POST "FAILED" is printed.
2680
2681* Patch by Nishant Kamat, 13 Feb 2004:
2682 Add support for TI OMAP1610 H2 Board
2683 Fixes for cpu/arm926ejs/interrupt.c
2684 (based on Richard Woodruff's patch for arm925, 16 Oct 03)
2685 Fix for a timer bug in OMAP1610 Innovator
2686 Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
2687
2688* Patches by Stephan Linz, 12 Feb 2004:
2689 - add support for NIOS timer with variable period preload counter value
2690 - prepare POST framework support for NIOS targets
2691
2692* Patch by Denis Peter, 11 Feb 2004:
2693 add POST support for the MIP405 board
2694
wdenkf70cbb22004-02-23 20:48:38 +00002695* Patch by Laurent Mohin, 10 Feb 2004:
2696 Fix buffer overflow in common/usb.c
2697
2698* Patch by Tolunay Orkun, 10 Feb 2004:
2699 Add support for Cogent CSB272 board
2700
wdenk2ebee312004-02-23 19:30:57 +00002701* Patch by Thomas Elste, 10 Feb 2004:
2702 Add support for NET+50 CPU and ModNET50 board
2703
2704* Patch by Sam Song, 10 Feb 2004:
2705 Fix typos in cfi_flash.c
2706
2707* Patch by Leon Kukovec, 10 Feb 2004
2708 Fixed long dir entry slot id calculation in get_vfatname
2709
2710* Patch by Robin Gilks, 10 Feb 2004:
2711 add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
2712 !=, <>, <, >, <=, >=)
2713
wdenkef893942004-02-23 16:11:30 +00002714* Fix problem with side effects in macros in include/usb.h
2715
2716* Patch by David Benson, 13 Nov 2003:
2717 bug 841358 - fix TFTP download size limit
2718
2719* Fixing bug 850768:
2720 improper flush_cache() in load_serial()
2721
2722* Fixing bug 834943:
2723 MPC8540 - missing volatile declarations
2724
2725* Patch by Stephen Williams, 09 Feb 2004:
2726 Add support for Xilinx SystemACE chip:
2727 - New files common/cmd_ace.c and include/systemace.h
2728 - Hook systemace support into cmd_fat and the partition manager
2729
2730* Patch by Travis Sawyer, 09 Feb 2004:
2731 Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
2732
wdenk56ed43e2004-02-22 23:46:08 +00002733* Patch by Travis Sawyer, 09 Feb 2004:
2734 o 440GX:
2735 - Fix PCI Indirect access for type 1 config cycles with ppc440.
2736 - Add phymode for 440 enet
2737 - fix pci pre init
2738 o XPedite1K:
2739 - Change board_pre_init to board_early_init_f
2740 - Add user flash to bus controller setup
2741 - Fix pci pre init
2742 - Fix is_pci_host to check GPIO for monarch bit
2743 - Force xpedite1k to pci conventional mode (via #define option)
2744
2745* Patch by Brad Kemp, 4 Feb 2004:
2746 - handle the machine check that is generated during the PCI scans
2747 on 82xx processors.
2748 - define the registers used in the IMMR by the PCI subsystem.
2749
2750* Patch by Pierre Aubert, 03 Feb 2004:
2751 cpu/mpc5xxx/start.S: copy MBAR into SPR311
2752
2753* Patch by Jeff Angielski, 03 Feb 2004:
2754 Fix copy & paste error in cpu/mpc8260/pci.c
2755
2756* Patch by Reinhard Meyer, 24 Jan 2004:
2757 Fix typo in cpu/mpc5xxx/pci_mpc5200.c
2758
wdenk4dd56e52004-02-20 22:02:48 +00002759* Add Auto-MDIX support for INCA-IP
2760
wdenke65527f2004-02-12 00:47:09 +00002761* Some code cleanup
2762
2763* Patch by Josef Baumgartner, 10 Feb 2004:
2764 Fixes for Coldfire port
2765
2766* Patch by Brad Kemp, 11 Feb 2004:
2767 Fix CFI flash driver problems
2768
wdenk88d73b52004-02-11 21:35:18 +00002769* Make sure to use a bus clock divider of 2 only when running TQM8xxM
2770 modules at CPU clock frequencies above 66 MHz.
wdenke65527f2004-02-12 00:47:09 +00002771
wdenk88d73b52004-02-11 21:35:18 +00002772* Optimize flash programming speed for LWMON (by another 100% :-)
2773
wdenk6cfa84e2004-02-10 00:03:41 +00002774* Patch by Jian Zhang, 3 Feb 2004:
2775 - Changed the incorrect FAT12BUFSIZE
2776 - data_begin in fsdata can be negative. Changed it to be short.
2777
wdenkc0bc2e12004-02-09 23:12:24 +00002778* Patches by Stephan Linz, 30 Jan 2004:
2779 1: - board/altera/common/flash.c:flash_erase():
2780 o allow interrupts befor get_timer() call
2781 o check-up each erased sector and avoid unexpected timeouts
2782 - board/altera/dk1c20/dk1s10.c:board_early_init_f():
2783 o enclose sevenseg_set() in cpp condition
2784 - remove the ASMI configuration for DK1S10_standard_32 (never present)
2785 - fix some typed in mistakes in the NIOS documentation
2786 2: - split DK1C20 configuration into several header files:
2787 o two new files for each NIOS CPU description
2788 o U-Boot related part is remaining in DK1C20.h
2789 3: - split DK1S10 configuration into several header files:
2790 o two new files for each NIOS CPU description
2791 o U-Boot related part is remaining in DK1S10.h
2792 4: - Add support for the Microtronix Linux Development Kit
2793 NIOS CPU configuration at the Altera Nios Development Kit,
2794 Stratix Edition (DK-1S10)
2795 5: - Add documentation for the Altera Nios Development Kit,
2796 Stratix Edition (DK-1S10)
2797 6: - Add support for the Nios Serial Peripharel Interface (SPI)
2798 (master only)
2799 7: - Add support for the common U-Boot SPI framework at
2800 RTC driver DS1306
2801
wdenkca262162004-02-09 20:51:26 +00002802* Patch by Rahul Shanbhag, 28 Jan 2004:
2803 Fix flash protection/locking handling for OMAP1610 innovator board.
2804
2805* Patch by Rolf Peukert, 28 Jan 2004:
2806 fix flash write problems on CSB226 board (write with 32 bit bus width)
2807
2808* Patches by Mark Jonas, 16 Jan 2004:
2809 - fix rounding error when calculating baudrates for MPC5200 PSCs
2810 - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
2811 time which is not supported
2812
wdenk2cefd152004-02-08 22:55:38 +00002813* Patch by Yuli Barcohen, 26 Jan 2004:
2814 Allow bzip2 compression for small memory footprint boards
2815
2816* Patch by Brad Kemp, 21 Jan 2004:
2817 Add support for CFI flash driver for both the Intel and the AMD
2818 command sets.
2819
2820* Patch by Travis Sawyer, 20 Jan 2004:
2821 Fix pci bridge auto enumeration of sibling p2p bridges.
2822
2823* Patch by Tolunay Orkun, 12 Jan 2004:
2824 Add some delays as needed for Intel LXT971A PHY support
2825
2826* Patches by Stephan Linz, 09 Jan 2004:
2827 - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
2828 - make DK1C20 board configuration related to ASMI conform to
2829 documentation
2830
wdenk927034e2004-02-08 19:38:38 +00002831* Patch by Anders Larsen, 09 Jan 2004:
2832
2833 ARM memory layout fixes: the abort-stack is now set up in the
2834 correct RAM area, and the BSS is zeroed out as it should be.
2835
2836 Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
2837 of the linker scripts are replaced by '__bss_start' and '_end',
2838 resp., which is a further step to eliminate unnecessary differences
2839 between the implementation of the CPU architectures.
2840
wdenk5401de42004-02-07 01:27:10 +00002841* Patch by liang a lei, 9 Jan 2004:
2842 Fix Intel 28F128J3 ID in include/flash.h
2843
2844* Patch by Masami Komiya, 09 Jan 2004:
2845 add support for TB0229 board (NEC VR4131 MIPS processor)
2846
2847* Patch by Leon Kukovec, 12 Dec 2003:
2848 changed extern __inline__ into static __inline__ in
2849 include/linux/byteorder/swab.h
2850
wdenk544e9732004-02-06 23:19:44 +00002851* Patch by Travis Sawyer, 30 Dec 2003:
2852 Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
2853 select MDI port based on enabled EMAC device.
2854 Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
2855 base PrPMC board.
2856
wdenk4b6e9052004-02-06 21:48:22 +00002857* Patch by Wolter Kamphuis, 15 Dec 2003:
2858 made CONFIG_SILENT_CONSOLE usable on all architectures
2859
2860* Disable date command on TQM866M - there is no RTC on MPC866
2861
wdenkfde37042004-01-31 20:06:54 +00002862* Fix variable CPU clock for MPC859/866 systems for low CPU clocks
2863
wdenk433feff2004-01-29 09:22:58 +00002864* Implement adaptive SDRAM timing configuration based on actual CPU
2865 clock frequency for INCA-IP; fix problem with board hanging when
2866 switching from 150MHz to 100MHz
2867
2868* Add PCMCIA CS support for BMS2003 board
2869
wdenkb50cde52004-01-24 20:25:54 +00002870* Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
2871 see doc/README.MPC866 for details;
2872 implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
2873 calculate CPU clock frequency from PLL register values.
2874
2875* Add support for 128 MB RAM on TQM8xxL/M modules
2876
wdenk398eeff2004-01-21 20:46:28 +00002877* Fix PS/2 keyboard problem caused by statically initialized variable
2878 pointing to a location in flash
2879
2880* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
2881
wdenkda55c6e2004-01-20 23:12:12 +00002882* The PS/2 mux on the BMS2003 board needs 450 ms after power on
2883 before we can access it; add delay in case we are faster (with no
2884 CF card inserted)
2885
2886* Cleanup of some init functions
2887
2888* Make sure SCC Ethernet is always stopped by the time we boot Linux
2889 to avoid Linux crashes by early packets coming in.
2890
2891* Accelerate flash accesses on LWMON board by using buffered writes
2892
wdenk2b80ae52004-01-18 18:21:54 +00002893* Fix typo in Makefile;
2894 fix problem with PARTNUM detection
2895
wdenkb983fa22004-01-16 00:30:56 +00002896* Patch by Reinhard Meyer, 09 Jan 2004:
2897 - add RTC support for MPC5200 based boards (requires RTC_XTAL)
2898
2899* Add support for IDE LED on BMS2003 board
2900 (exclusive with status LED!)
2901
2902* Add support for PS/2 keyboard (used with PS/2 multiplexor on
2903 BMS2003 board)
2904
2905* Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
2906 Add common files for "emk" boards
2907
wdenk87249ba2004-01-06 22:38:14 +00002908* Add a common get_ram_size() function and modify the the
2909 board-specific files to invoke that common implementation.
2910
2911======================================================================
wdenk7c699672004-01-06 11:13:56 +00002912Changes for U-Boot 1.0.1:
wdenk4b16c2e2003-11-07 13:42:26 +00002913======================================================================
2914
wdenk7c699672004-01-06 11:13:56 +00002915* Set default clock for INCA-IP to 150 MHz
2916
wdenk2f99a692004-01-04 22:51:12 +00002917* Make BMS2003 use a separate config file to avoid #ifdef mess;
2918 add I2C support; add support for DS1337 RTC
2919
2920* Add CompactFlash support for BMS2003 board
2921
2922* Add support for status LED on BMS2003 board
2923
wdenkad276f22004-01-04 16:28:35 +00002924* Patch by Scott McNutt, 02 Jan 2004:
2925 Add support for the Nios Active Serial Memory Interface (ASMI)
2926 on Cyclone devices
2927
2928* Patch by Andrea Marson, 16 Dec 2003:
2929 Add support for the PPChameleon ME and HI modules
2930
2931* Patch by Yuli Barcohen, 22 Dec 2003:
2932 Add support for Motorola DUET ADS board (MPC87x/88x)
2933
wdenkae65f502004-01-03 21:24:46 +00002934* Patch by Robert Schwebel, 15 Dec 2003:
2935 add support for cramfs (uses JFFS2 command interface)
2936
wdenk3be717f2004-01-03 19:43:48 +00002937* Patches by Stephan Linz, 11 Dec 2003:
2938 - more documentation for NIOS port
2939 - new struct nios_pio_t, struct nios_spi_t
2940 - Reconfiguration for NIOS Development Kit DK1C20:
2941 o move board related code from board/dk1c20
2942 to board/altera/dk1c20
2943 o create a new common source path board/altera/common
2944 and move generic flash access stuff into it
2945 o change/expand configuration file DK1C20.h
2946 - Add support for NIOS Development Kit DK1S10
2947 - Add status LED support for NIOS systems
2948 - Add dual 7-segment LED support for Altera NIOS DevKits
2949
wdenk5da7f2f2004-01-03 00:43:19 +00002950* Patch by Ronen Shitrit, 10 Dec 2003:
2951 Add support for the Marvell DB64360 / DB64460 development boards
2952
2953* Patch by Detlev Zundel, 10 Dec 2003:
2954 fix dependency problem in examples/Makefile
2955
wdenkbc01dd52004-01-02 16:05:07 +00002956* Patch by Denis Peter, 8 Dec 2003
2957 - add support for the PATI board (MPC555)
2958 - add SPI support for the MPC5xx
2959
2960* Patch by Anders Larsen, 08 Dec 2003:
2961 add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
2962 to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
2963 cleanup some redundand #defines
2964
wdenk0260cd62004-01-02 15:01:32 +00002965* Patch by André Schwarz, 8 Dec 2003:
2966 fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
2967 - TX and RX deskriptors must be quad-word aligned
2968 - does not work with only one TX deskriptor
2969 - standard reset method does not work
2970
2971* Patch by Masami Komiya, 08 Dec 2003:
2972 add RTL8139 ethernet driver
2973
2974* Patches by Ed Okerson, 07 Dec 2003:
2975 - fix ethernet for the AU1x00 processors in little-endian mode.
2976 - extend memsetup.S for the AU1x00 processors in BE and LE modes
2977
wdenk1ebf41e2004-01-02 14:00:00 +00002978* Minor code cleanup (coding style)
2979
2980* Patch by Reinhard Meyer, 30 Dec 2003:
2981 - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
2982 - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
2983 - turned debug print of PHY registers into a function (called in two places)
2984 - added support for EMK MPC5200 based modules
2985
2986* Fix MPC8xx PLPRCR_MFD_SHIFT typo
2987
2988* Add support for TQM866M modules
2989
2990* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
2991
2992* Fix a few compiler warnings
2993
wdenk78e3ab32003-12-28 11:44:59 +00002994* Patch by Reinhard Meyer, 28 Dec 2003:
2995 Add initial support for TOP5200 board
2996
wdenk67f13362003-12-27 19:24:54 +00002997* Make CPU clock on ICA-IP board controllable by a "cpuclk"
2998 environment variable which can set to "100", "133", or "150". The
2999 CPU clock will be configured accordingly upon next reboot. Other
3000 values are ignored. In case of an invalid or undefined "cpuclk"
3001 value, the compile-time default CPU clock speed will be used.
3002
3003* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
3004 window that is used to access the UART registers by the Linux driver)
3005
3006* Patch by Reinhard Meyer, 20 Dec 2003:
3007 Fix clock calculation for the MPC5200 for higher clock frequencies
3008 (above 2**32 / 10 = 429.5 MHz).
3009
3010* Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
3011
wdenk236d3fc2003-12-20 22:45:10 +00003012* Fix IceCube CLKIN configuration (it's 33.000000MHz)
3013
3014* Add new configuration for IceCube board with DDR memory
3015
3016* Update TRAB memory configurations
3017
wdenkdf28aa02003-12-12 00:02:26 +00003018* Add JFFS2 support for INCA-IP board
3019
stroese9c470352003-12-09 15:04:55 +00003020* Patch by Bill Hargen, 09 Dec 2003:
3021 - BUBINGA405EP: changed flash driver to protect top sector containing
3022 first instruction.
3023 - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
3024 - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
3025 - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
3026 - 405EP: added/fixed support for "reginfo" command.
3027 - 4xx: removed spurious MII error messages on "mii info" command.
3028
wdenkabf7a7c2003-12-08 01:34:36 +00003029* Patch by Bernhard Kuhn, 28 Nov 2003:
3030 add support for Coldfire CPU
3031 add support for Motorola M5272C3 and M5282EVB boards
3032
wdenk7f00b942003-12-07 23:55:12 +00003033* Patch by Pierre Aubert, 24 Nov 2003:
3034 - add a return value for the fpga command
3035 - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
3036 is defined. If ide_preinit fails, ide_init is aborted.
3037 - fix an endianess problem in fat.h
3038
wdenk174e0e52003-12-07 22:27:15 +00003039* Patch by Wolter Kamphuis, 05 Dec 2003:
3040 Add support for SNMC's QS850/QS823/QS860T boards
3041
wdenk444f22b2003-12-07 21:39:28 +00003042* Patch by Yuli Barcohen, 3 Dec 2003:
3043 "revive" U-Boot support for old Motorola MPC860ADS board
3044
3045* Patch by Cam(ilo?), 03 Dec 2003:
3046 make examples build even with broken Montavista objcopy
3047
3048* Patch by Pavel Bartusek, 27 Nov 2003:
3049 fix conversion problem with "bootretry" evironment variable
3050
wdenk4e7a58a2003-12-07 19:24:00 +00003051* Patch by Andre Schwarz, 24 Nov 2003:
3052 add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
3053
3054* Patch by Pavel Bartusek, 21 Nov 2003:
3055 set ZMII bridge speed on 440
3056
3057* Patch by Anders Larsen, 17 Nov 2003:
3058 Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
3059
wdenk4ea537d2003-12-07 18:32:37 +00003060* Patches by David Müller, 14 Nov 2003:
3061 - board/mpl/common/common_util.c
3062 * implement support for BZIP2 compressed images
3063 * various cleanups (printf -> puts, ...)
3064 - board/mpl/common/flash.c
3065 * report correct errors to upper layers
3066 * check the erase fail and VPP low bits in status reg
3067 - board/mpl/vcma9/cmd_vcma9.c
3068 - board/mpl/vcma9/flash.c
3069 * various cleanups (printf -> puts, ...)
3070 - common/cmd_usb.c
3071 * fix typo in comment
3072 - cpu/arm920t/usb_ohci.c
3073 * support for S3C2410 is missing in #if line
3074 - drivers/cs8900.c
3075 * reinit some registers in case of error (cable missing, ...)
3076 - fs/fat/fat.c
3077 * support for USB/MMC devices is missing in #if line
3078 - include/configs/MIP405.h
3079 - include/configs/PIP405.h
3080 * enable BZIP2 support
3081 * enlarge malloc space to 1MiB because of BZIP2 support
3082 - include/configs/VCMA9.h
3083 * enable BZIP2 support
3084 * enlarge malloc space to 1MiB because of BZIP2 support
3085 * enable USB support
3086 - lib_arm/armlinux.c
3087 * change calling convention of ARM Linux kernel as
3088 described on http://www.arm.linux.org.uk/developer/booting.php
3089
3090* Patch by Thomas Lange, 14 Nov 2003:
3091 Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
3092 support all these AMD boards.
3093
3094* Patch by Thomas Lange, 14 Nov 2003:
3095 Workaround for mips au1x00 physical memory accesses (the au1x00
3096 uses a 36 bit bus internally and cannot access physical memory
3097 directly. Use the uncached SDRAM address instead of the physical
3098 one.)
3099
wdenk5d5317e2003-12-07 00:46:27 +00003100* Patch by Xue Ligong (Joe), 13 Nov 2003:
3101 add Realtek 8019 ethernet driver
3102
3103* Patch by Yuli Barcohen, 13 Nov 2003:
3104 MPC826xADS/PQ2FADS cleanup
3105
3106* Patch by Anders Larsen, 12 Nov 2003:
3107 Update README to mark the PORTIO commands non-standard
3108
wdenk86765902003-12-06 23:55:10 +00003109* Patch by Nicolas Lacressonnière, 12 Nov 2003:
3110 update for for Atmel AT91RM9200DK development kit:
3111 - support for environment variables in DataFlash
3112 - Atmel DataFlash AT45DB1282 support
3113
3114* Patch by Jeff Carr, 11 Nov 2003:
3115 add support for new version of 8270 processors
3116
3117* Patches by George G. Davis, 05 Nov 2003:
3118 - only pass the ARM linux initrd tag to the kernel when an initrd
3119 is actually present
3120 - update omap1510inn configuration file
3121
wdenkf4cec3f2003-12-06 23:20:41 +00003122* Patches by Stephan Linz, 3 Nov 2003:
3123 - more endianess fixes for LAN91C111 driver
3124 - CFG_HZ configuration patch for NIOS Cyclone board
3125
3126* Patch by Stephan Linz, 28 Oct 2003:
3127 fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
3128
3129* Patch by Steven Scholz, 20 Oct 2003:
3130 - make "mii info <addr>" show infor for PHY at "addr" only
3131 - Endian fix for miiphy_info()
3132
wdenkc0aa5c52003-12-06 19:49:23 +00003133* Patch by Gleb Natapov, 19 Sep 2003:
3134 Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
3135
3136* Patch by Anders Larsen, 17 Sep 2003:
3137 Bring ARM memory layout in sync with the documentation:
3138 stack and malloc-heap are now located _below_ the U-Boot code
3139
wdenk768844e2003-12-06 11:20:01 +00003140* Accelerate booting on TRAB board: read and check autoupdate image
3141 headers first instead of always reading the whole images.
3142
wdenk1ae251b2003-12-05 21:08:38 +00003143* Fix type in MPC5XXX code (pointed out by Victor Wren)
3144
wdenk78ae91f2003-12-03 23:53:42 +00003145* Enabled password check on RMU board
3146
3147* Fix configuration problem with IceCube in LOWBOOT configuration:
3148 envrionment got embedded, corrupting the image layout.
3149
3150* Fix NEC display names (it's 6440 [for 640x480], not 6640).
3151
wdenkc0d54ae2003-11-25 16:55:19 +00003152* Added BMS2003 board
3153 add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
3154
wdenk9a1ff302003-11-17 21:45:27 +00003155* Fix flash driver for TRAB board (must use Unlock Bypass Reset
3156 command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
3157 and CPLD
3158
wdenkc6abb7e2003-11-17 21:14:37 +00003159* Use "-fPIC" instead of "-mrelocatable" to prevent problems with
3160 recent tools
3161
3162* Add checksum verification to 'imls' command
3163
3164* Add bd_info fields needed for 4xx Linux I2C driver
3165
3166* Patch by Martin Krause, 4 Nov. 2003:
3167 Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
3168
3169* Print used network interface when CONFIG_NET_MULTI is set
3170
wdenk4b16c2e2003-11-07 13:42:26 +00003171* Patch by Bernhard Kuhn, 28 Oct 2003:
3172 Add low boot support for MPC5200
3173
3174* Fix problem with dual PCMCIA support (NSCU)
3175
3176* Fix MPC5200 I2C initialization function
3177
3178======================================================================
wdenk934c4f82003-09-11 19:48:06 +00003179Changes for U-Boot 1.0.0:
3180======================================================================
3181
wdenk655a0f92003-10-30 21:49:38 +00003182* Fix parameter passing to standalone images with bootm command
3183
3184* Patch by Kyle Harris, 30 Oct 2003:
3185 Fix build errors for ixdp425 board
3186
3187* Patch by David M. Horn, 29 Oct 2003:
3188 Fixes to build under CYGWIN
3189
3190* Get IceCube MGT5100 working (again)
3191
wdenkb6c60cb32003-10-29 23:18:55 +00003192* Fix problems in memory test on some boards (which was not
3193 non-destructive as intended)
3194
3195* Patch by Gary Jennejohn, 28 Oct 2003:
3196 Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
3197 to prevent stack overflow on ARM systems
3198
wdenk55618472003-10-28 09:14:21 +00003199* Patch by Stephan Linz, 28 Oct 2003:
3200 fix init sequence error for NIOS port
3201
3202* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
3203
3204* Add CONFIG_VERSION_VARIABLE to TRAB configuration
3205
wdenka983cc22003-10-26 22:52:58 +00003206* Patch by Xiao Xianghua, 23 Oct 2003:
3207 small patch for mpc85xx
3208
3209* Fix small problem in MPC5200 I2C driver
3210
3211* Fix FCC3 support on ATC board
3212
dzu6605c842003-10-24 13:14:45 +00003213* Correct header printing for multi-image files in do_bootm()
3214
3215* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
3216
wdenk6fcda222003-10-22 09:00:28 +00003217* Fix PCI problems on PPChameleon board
3218
wdenk3da587e2003-10-19 23:22:11 +00003219* Patch by Steven Scholz, 18 Oct 2003:
3220 Fix AT91RM9200 ethernet driver
3221
3222* Patch by Nye Liu, 17 Oct 2003:
3223 Fix typo in include/mpc8xx.h
3224
3225* Patch by Richard Woodruff, 16 Oct 03:
3226 Fixes for cpu/arm925/interrupt.c
3227 - Initialize timestamp & lastdec vars.
3228 - fix timestamp overflows.
3229 - fix lastdec overflow.
3230 - smarter normalization to allow udelay() below 1ms to work.
3231
3232* Patch by Scott McNutt, 16 Oct
3233 add networking support for the Altera Nios Development Kit,
3234 Cyclone Edition (DK-1C20)
3235
3236* Patch by Jon Diekema, 14 Oct 2003:
3237 add hint about doc/README.silent to README file
3238
dzub02ed682003-10-19 21:43:26 +00003239* Add CompactFlash support for NSCU
3240
wdenkad7541e2003-10-19 22:30:08 +00003241* Fix PCI problems on PPChameleonEVB
3242
wdenk17d1a1d2003-10-16 12:53:35 +00003243* TRAB auto-update: Base decision if we have to strip the image
3244 header on image type as encoded in the header
wdenkad7541e2003-10-19 22:30:08 +00003245 (include image type patch by Martin Krause, 17 Oct 2003)
wdenk17d1a1d2003-10-16 12:53:35 +00003246
wdenk9c53f402003-10-15 23:53:47 +00003247* Patches by Xianghua Xiao, 15 Oct 2003:
3248
3249 - Added Motorola CPU 8540/8560 support (cpu/85xx)
3250 - Added Motorola MPC8540ADS board support (board/mpc8540ads)
3251 - Added Motorola MPC8560ADS board support (board/mpc8560ads)
3252
3253* Fix flash timings on TRAB board
3254
wdenkbd1575f2003-10-14 19:43:55 +00003255* Make sure HUSH is initialized for running auto-update scripts
3256
3257* Make 5200 reset command _really_ reset the board, without running
3258 any other code after it
3259
3260* Fix errors with flash erase when range spans across banks
3261 that are mapped in reverse order
3262
3263* Fix flash mapping and display on P3G4 board
3264
3265* Patch by Kyle Harris, 15 Jul 2003:
3266 - add support for Intel IXP425 CPU
3267 - add support for IXDP425 eval board
3268
wdenk808532a2003-10-10 10:05:42 +00003269* Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
3270 for more information
3271
wdenk9b7f3842003-10-09 20:09:04 +00003272* Patch by Steven Scholz, 10 Oct 2003
3273 - Add support for Altera FPGA ACEX1K
3274
wdenk9f837932003-10-09 19:00:25 +00003275* Patches by Thomas Lange, 09 Oct 2003:
3276 - fix cmd_ide.c for non ppc boards (read/write functions did not
3277 add ATA base address)
3278 - fix for shannon board
3279 - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
wdenk9b7f3842003-10-09 20:09:04 +00003280 - Endian swap ATA identity for all big endian CPUs, not just PPC
3281 - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
3282 args to linux
3283 - add support for dbau1x00 board (MIPS32)
wdenk9f837932003-10-09 19:00:25 +00003284
3285* Patch by Sangmoon Kim, 07 Oct 2003:
3286 add support for debris board
3287
wdenk61970fd2003-10-09 13:16:55 +00003288* Patch by Martin Krause, 09 Oct 2003:
3289 Fixes for TRAB board
3290 - /board/trab/rs485.c: correct baudrate
wdenk9c53f402003-10-15 23:53:47 +00003291 - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
wdenk61970fd2003-10-09 13:16:55 +00003292 udelay(); fix some timing problems with adc controller
3293 - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
3294 modify commands: touch and buzzer
3295
3296* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
3297 (quick & dirty workaround for rogue pointer problem in get_vfatname());
3298 Use direct function calls for auto_update instead of hush commands
3299
wdenk60164a82003-10-08 23:26:14 +00003300* Patch by Scott McNutt, 04 Oct 2003:
3301 - add support for Altera Nios-32 CPU
3302 - add support for Nios Cyclone Development Kit (DK-1C20)
3303
3304* Patch by Steven Scholz, 29 Sep 2003:
3305 - A second parameter for bootm overwrites the load address for
3306 "Standalone Application" images.
3307 - bootm sets environment variable "filesize" to the resulting
3308 (uncompressed) data length for "Standalone Application" images
3309 when autostart is set to "no". Now you can do something like
3310 if bootm $fpgadata $some_free_ram ; then
3311 fpga load 0 $some_free_ram $filesize
3312 fi
3313
3314* Patch by Denis Peter, 25 Sept 2003:
3315 add support for the MIP405 Rev. C board
3316
wdenk2f0812d2003-10-08 22:45:44 +00003317* Patch by Yuli Barcohen, 25 Sep 2003:
3318 add support for Zephyr Engineering ZPC.1900 board
3319
3320* Patch by Anders Larsen, 23 Sep 2003:
3321 add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
3322 implemented for the x86 architecture)
3323
wdenk49c3f672003-10-08 22:33:00 +00003324* Patch by Sangmoon Kim, 23 Sep 2003:
3325 fix pll_pci_to_mem_multiplier table for MPC8245
3326
3327* Patch by Anders Larsen, 22 Sep 2003:
3328 enable timed autoboot on PXA
3329
3330* Patch by David Müller, 22 Sep 2003:
wdenk49c3f672003-10-08 22:33:00 +00003331 - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
3332 returns correct libgcc file path
3333 - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
3334 time on s3c24x0 systems
3335
3336* Patch by Jon Diekema, 19 Sep 2003:
3337 - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
3338 link state to the fault LED.
3339 - In NetLoop, make the Fault LED reflect the link status. The link
3340 status gets updated on entry, and on timeouts.
wdenk9c53f402003-10-15 23:53:47 +00003341
wdenk1ee550e2003-10-08 22:14:02 +00003342* Patch by Anders Larsen, 18 Sep 2003:
3343 allow mkimage to build and run on Cygwin-hosted systems
3344
3345* Patch by Frank Müller, 18 Sep 2003:
3346 use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
3347 cpu/mpc8xx/fec.c
3348
3349* Patch by Pantelis Antoniou, 16 Sep 2003:
3350 add tool to compute fileds in the PLPRCR register for MPC86x
3351
wdenkec207f92003-10-07 20:01:55 +00003352* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
3353
wdenke97dcd02003-10-07 10:33:38 +00003354* Fix build problems under FreeBSD
3355
wdenk6cd4a5e2003-10-06 22:00:45 +00003356* Add generic filesystem image type
3357
wdenk7182b0f2003-10-06 21:55:32 +00003358* Make fatload set filesize environment variable
3359
3360* enable basic / medium / high-end configurations for PPChameleonEVB
3361 board; fix NAND code
3362
3363* enable TFTP client code to specify to the server the desired
3364 timeout value (see RFC-2349)
3365
dzu15b57c72003-09-30 15:22:12 +00003366* Improve SDRAM setup for TRAB board
3367
dzud5e45d82003-09-30 15:11:43 +00003368* Suppress all output with splashscreen configured only if "splashimage"
3369 is set
3370
dzuc9b08252003-09-30 14:36:51 +00003371* Fix problems with I2C support for mpc5200
3372
dzu8d7e4d12003-09-29 21:55:54 +00003373* Adapt TRAB configuration and auto_update to new memory layout
3374
dzu69438f62003-09-25 22:32:40 +00003375* Add configuration for wtk board
3376
dzufae2d812003-09-25 22:30:12 +00003377* Add support for the Sharp LQ065T9DR51U LCD display
3378
wdenk8706ea82003-09-18 10:02:25 +00003379* Patch by Rune Torgersen, 17 Sep 2003:
3380 - Fixes for MPC8266 default config
wdenk5256def2003-09-18 10:45:21 +00003381 - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
wdenk8706ea82003-09-18 10:02:25 +00003382
3383* Patches by Jon Diekema, 17 Sep 2003:
3384 - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
3385 env_common.c)
3386 - sbc8260 tweaks
3387 - adjust "help" output
3388
wdenk5958f4a2003-09-18 09:21:33 +00003389* Patches by Anders Larsen, 17 Sep 2003:
3390 - fix spelling errors
3391 - set GD_FLG_DEVINIT flag only after device function pointers
3392 are valid
3393 - Allow CFG_ALT_MEMTEST on systems where address zero isn't
3394 writeable
3395 - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
3396 - trigger watchdog while waiting in serial driver
3397
wdenkb6b2f0e2003-09-17 22:48:07 +00003398* Add auto-update code for TRAB board using USB memory sticks,
3399 support new configuration with more memory
wdenkf6a6ac12003-09-17 15:10:32 +00003400
wdenk7f202b92003-09-16 17:35:37 +00003401* disable MPC5200 bus pipelining as workaround for bus contention
3402
wdenkf5547d32003-09-16 17:06:05 +00003403* Modify XLB arbiter priorities on MPC5200 so all devices use same
3404 priority; configure critical interrupts to be handled like external
3405 interrupts
3406
wdenk6e2bf7a2003-09-16 11:39:10 +00003407* Make IPB clock on MGT5100/MPC5200 configurable in board config file;
3408 go back to 66 MHz for stability
3409
wdenk1f197c62003-09-15 18:00:00 +00003410* Patches by Jon Diekema, 15 Sep 2003:
3411 - add description for missing CFG_CMD_* entries in the README file
3412 - sacsng tweaks
3413
wdenkfc314ce2003-09-14 19:08:39 +00003414* Patch by Gleb Natapov, 14 Sep 2003:
3415 enable watchdog support for all MPC824x boards that have a watchdog
3416
3417* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
3418 "Non-octet Aligned Frame" errors we see at 100 Mbps
3419
3420* Patch by Sharad Gupta, 14 Sep 2003:
3421 fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
3422
wdenkbd08bc42003-09-13 19:13:29 +00003423* Patch by llandre, 11 Sep 2003:
3424 update configuration for PPChameleonEVB board
3425
wdenk25521902003-09-13 19:01:12 +00003426* Patch by David Müller, 13 Sep 2003:
3427 various changes to VCMA9 board specific files
3428
3429* Add I2C support for MGT5100 / MPC5200
3430
wdenkf28560f2003-09-12 20:09:09 +00003431* Patch by Rune Torgersen, 11 Sep 2003:
3432 Changed default memory option on MPC8266ADS to NOT be Page Based
3433 Interleave, since this doesn't work very well with the standard
3434 16MB DIMM
3435
3436* Patch by George G. Davis, 12 Sep 2003:
3437 fix Makefile settings for sk98 driver
3438
stroese84da3532003-09-12 08:57:52 +00003439* Patch by Stefan Roese, 12 Sep 2003:
3440 - new boards added: DP405, HUB405, PLU405, VOH405
3441 - some esd boards updated
3442 - cpu/ppc4xx/sdram.c: disable memory controller before setting
3443 first values
3444 - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
3445
wdenk4cc02a82003-09-11 23:06:34 +00003446* Patch by Martin Krause, 11 Sep 2003:
3447 add burn-in tests for TRAB board
3448
3449* Enable instruction cache on MPC5200 board
3450
wdenk934c4f82003-09-11 19:48:06 +00003451* Patch by Denis Peter, 11 Sep 2003:
3452 - fix USB data pointer assignment for bulk only transfer.
3453 - prevent to display erased directories in FAT filesystem.
3454
3455* Change output format for NAND flash - make it look like for other
3456 memory, too
3457
3458======================================================================
wdenkde887eb2003-09-10 18:20:28 +00003459Changes for U-Boot 0.4.8:
wdenk2bb11052003-07-17 23:16:40 +00003460======================================================================
3461
dzufae2d812003-09-25 22:30:12 +00003462* Add I2C and RTC support for RMU board
3463
wdenk2c9b05d2003-09-10 22:30:53 +00003464* Patches by Denis Peter, 9 Sep 2003:
3465 add FAT support for IDE, SCSI and USB
3466
3467* Patches by Gleb Natapov, 2 Sep 2003:
3468 - cleanup of POST code for unsupported architectures
3469 - MPC824x locks way0 of data cache for use as initial RAM;
3470 this patch unlocks it after relocation to RAM and invalidates
3471 the locked entries.
3472
3473* Patch by Gleb Natapov, 30 Aug 2003:
3474 new I2C driver for mpc107 bridge. Now works from flash.
3475
3476* Patch by Dave Ellis, 11 Aug 2003:
3477 - JFFS2: fix typo in common/cmd_jffs2.c
3478 - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
3479 - JFFS2: remove node version 0 warning
3480 - JFFS2: accept JFFS2 PADDING nodes
3481 - SXNI855T: add AM29LV800 support
3482 - SXNI855T: move environment from EEPROM to flash
3483 - SXNI855T: boot from JFFS2 in NOR or NAND flash
3484
3485* Patch by Bill Hargen, 11 Aug 2003:
3486 fixes for I2C on MPC8240
3487 - fix i2c_write routine
3488 - fix iprobe command
3489 - eliminates use of global variables, plus dead code, cleanup.
3490
wdenkde887eb2003-09-10 18:20:28 +00003491* Add support for USB Mass Storage Devices (BBB)
3492 (tested with USB memory sticks only)
3493
3494* Avoid flicker on TRAB's VFD
3495
wdenkeb20ad32003-09-05 23:19:14 +00003496* Add support for SK98xx driver
3497
3498* Add PCI support for SL8245 board
3499
3500* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
3501 or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
3502 Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
3503
3504* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
3505 to allow for more accurate baudrate settings
3506 (error now 0.7% at 115 kbps, instead of 3.5% before)
3507
3508* Patch by Andreas Mohr, 4 Sep 2003:
3509 Fix a lot of spelling errors
3510
wdenk232fe0b2003-09-02 22:48:03 +00003511* Add support for PPChameleon Eval Board
3512
3513* Add support for P3G4 board
3514
3515* Fix problem with MGT5100 FEC driver: add "early" MAC address
3516 initialization
3517
wdenk9a8965d2003-08-31 18:37:54 +00003518* Patch by Yuli Barcohen, 7 Aug 2003:
3519 check BCSR to detect if the board is configured in PCI mode
3520
wdenkde887eb2003-09-10 18:20:28 +00003521======================================================================
3522Changes for U-Boot 0.4.7:
3523======================================================================
3524
wdenk84650f52003-08-30 00:05:50 +00003525* Patch by Raghu Krishnaprasad, 7 Aug 2003:
3526 add support for Adder II MPC852T module
3527
wdenk7eaacc52003-08-29 22:00:43 +00003528* Patch by George G. Davis, 19 Aug 2003:
3529 fix TI Innovator/OMAP1510 pin configs
3530
3531* Patches by Kshitij, 18 Aug 2003
3532 - add support for arm926ejs cpu core
3533 - add support for TI OMAP 1610 Innovator Board
3534
wdenk710e3502003-08-29 20:57:53 +00003535* Patch by Yuli Barcohen, 14 Aug 2003:
3536 add support for bzip2 uncompression
3537
3538* Add GCC library to examples/Makefile so GCC utility functions will
3539 be resolved, too
3540
wdenk2191f502003-08-29 10:05:53 +00003541* Add I2C and RTC support for RMU board using software I2C driver
3542 (because of better response to iprobe command); fix problem with
3543 "reset" command
3544
stroese20a26922003-08-28 14:24:37 +00003545* Patch by Matthias Fuchs, 28 Aug 2003:
3546 Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
3547 CONFIG_BOOTP_MAKS (see README).
3548
wdenkb10ba6b2003-08-28 09:41:22 +00003549* Fix ICU862 environment problem
3550
3551* Fix RAM size detection for RMU board
3552
3553* Implement "reset" for MGT5100/MPC5200 systems
3554
3555======================================================================
3556Changes for U-Boot 0.4.6:
3557======================================================================
3558
wdenk5d841732003-08-17 18:55:18 +00003559* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
3560 allow selection of clock frequency as "make" target
3561
3562* Implement memory autosizing code for IceCube boards
3563
3564* Configure network port on INCA-IP for autonegotiation
3565
3566* Fix overflow problem in network timeout code
3567
3568* Patch by Richard Woodruff, 8 Aug 2003:
3569 Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
3570
wdenkb10ba6b2003-08-28 09:41:22 +00003571======================================================================
3572Changes for U-Boot 0.4.5:
3573======================================================================
3574
wdenkfb229ae2003-08-07 22:18:11 +00003575* Update for TQM board defaults:
3576 disable clocks_in_mhz, enable boot count limit
3577
dzuf6565c62003-08-07 15:04:48 +00003578* Removed tools/gdb from "make all" target. Added make target "gdbtools"
3579 in toplevel directory instead. Removed astest.c from tools/gdb because
3580 it is no longer relevant.
3581
wdenk02379022003-08-05 18:22:44 +00003582* Fix PCI support for MPC5200 / IceCube Board
3583
wdenk0a658552003-08-05 17:43:17 +00003584* Map ISP1362 USB OTG controller for NSCU board
3585
3586* Patch by Brad Parker, 02 Aug 2003:
3587 fix sc520_cdp problems
3588
3589* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
3590
3591* Allow erase command to cross flash bank boundaries
3592
wdenke58b0dc2003-07-27 00:21:01 +00003593* Patch by Scott McNutt, 21 Jul 2003:
3594 Add support for LynuxWorks Kernel Downloadable Images (KDIs).
3595 Both LynxOS and BlueCat linux KDIs are supported.
3596
3597* Patch by Richard Woodruff, 25 Jul 2003:
3598 use more reliable reset for OMAP/925T
3599
3600* Patch by Nye Liu, 25 Jul 2003:
3601 fix typo in mpc8xx.h
3602
3603* Patch by Richard Woodruff, 24 Jul 2003:
3604 Fixes for cmd_nand.c:
3605 - Fixed null dereferece which could result in incorrect ECC values.
3606 - Added support for devices with no Ready/Busy signal hooked up.
3607 - Added OMAP1510 read/write protect handling.
3608 - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
3609 for non-JFFS2.
3610 - Switched default ECC to be JFFS2.
3611
wdenkb8463562003-07-26 08:08:08 +00003612* Allow crc32 to be used at address 0x000
3613
3614* Provide consistent interface to standalone applications to access
3615 the 'global_data' structure
3616 Provide a doc/README.standalone more useful to users/developers.
3617
3618* Make IceCube MGT5100 FEC driver work
3619
wdenk874ac262003-07-24 23:38:38 +00003620* Implement new mechanism to export U-Boot's functions to standalone
3621 applications: instead of using (PPC-specific) system calls we now
3622 use a jump table; please see doc/README.standalone for details
3623
3624* Patch by Dave Westwood, 24 Jul 2003:
3625 added support for Unity OS (a proprietary OS)
3626
3627* Patch by Detlev Zundel, 23 Jul 2003:
3628 add "imls" command to print flash table of contents
3629
3630* Fix cold boot detection for log buffer reset
3631
3632* Return error for invalid length specifiers with "cp.X" etc.
3633
3634* Fix startup problem on MIPS
3635
3636* Allow for CONFIG_SPLASH_SCREEN even when no explicit
3637 bitmap support is configured
3638
3639* Patch by Bill Hargen, 18 Jul 2003:
3640 - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
3641
3642* Patch by Denis Peter, 18 Jul 2003:
3643 - fix memory configuration for MIP405T
3644 - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
3645
3646* Cleanup of TQM82xx configurations; use "official" board types
3647 to make selection easier.
3648
wdenk2bb11052003-07-17 23:16:40 +00003649* Patch by Martin Krause, 17 Jul 2003:
3650 add delay to get I2C working with "imm" command and s3c24x0_i2c.c
3651
3652* Patch by Richard Woodruff, 17 July 03:
stroese20a26922003-08-28 14:24:37 +00003653 - Fixed bug in OMAP1510 baud rate divisor settings.
wdenk2bb11052003-07-17 23:16:40 +00003654
3655* Patch by Nye Liu, 16 July 2003:
3656 MPC860FADS fixes:
3657 - add MPC86xADS support (uses MPC86xADS.h)
3658 - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
3659 o PLPRCR changes
3660 o BRG changes (EXTAL/XTAL restricted to 10MHz)
3661 o don't trust gclk() software measurement by default, depend on
3662 CONFIG_8xx_GCLK_FREQ
3663 - add DRAM SIMM not installed detection
3664 - use more "correct" SDRAM initialization sequence
3665 - allow different SDRAM sizes (8xxADS has 8M)
3666 - default DER is 0
3667 - remove unused MAMR defines from FADS860T.h (all done in fads.c)
3668 - rename MAMR/MBMR defines to be more consistent. Should eventually
3669 be merged into MxMR to better reflect the PowerQUICC datasheet.
3670
3671* Patch by Yuli Barcohen, 16 Jul 2003:
3672 support new Motorola PQ2FADS-ZU evaluation board which replaced
3673 MPC8260ADS and MPC8266ADS
3674
3675======================================================================
wdenk21136db2003-07-16 21:53:01 +00003676Changes for U-Boot 0.4.4:
3677======================================================================
3678
3679* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
3680
3681* Add support for MGT5100 and MPC5200 processors
3682
3683* Patch by Lutz Dennig, 15 Jul 2003:
3684 update for R360MPI board
3685
3686======================================================================
wdenkdccbda02003-07-14 22:13:32 +00003687Changes for U-Boot 0.4.3:
wdenkb9bbd242003-06-30 16:24:52 +00003688======================================================================
3689
wdenkf6f96f72003-07-15 20:04:06 +00003690* Patches by Kshitij, 04 Jul 2003
wdenk21136db2003-07-16 21:53:01 +00003691 - added support for arm925t cpu core
wdenkf6f96f72003-07-15 20:04:06 +00003692 - added support for TI OMAP 1510 Innovator Board
3693
wdenkca9bc762003-07-15 07:45:49 +00003694* Patches by Martin Krause, 14 Jul 2003:
3695 - add I2C support for s3c2400 systems (trab board)
3696 - (re-) add "ping" to command table
3697
3698* Fix handling of "slow" POST routines
3699
wdenkdccbda02003-07-14 22:13:32 +00003700* Patches by Yuli Barcohen, 13 Jul 2003:
3701 - Correct flash and JFFS2 support for MPC8260ADS
3702 - fix PVR values and clock generation for PowerQUICC II family
3703 (8270/8275/8280)
3704
3705* Patch by Bernhard Kuhn, 08 Jul 2003:
3706 - add support for M68K targets
3707
3708* Patch by Ken Chou, 3 Jul:
3709 - Fix PCI config table for A3000
3710 - Fix iobase for natsemi.c
3711 (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
wdenk21136db2003-07-16 21:53:01 +00003712
wdenkdccbda02003-07-14 22:13:32 +00003713* Allow to enable "slow" POST routines by key press on power-on
3714* Fix temperature dependend switching of LCD backlight on LWMON
3715* Tweak output format for LWMON
3716
stroesebe848492003-07-11 08:23:12 +00003717* Patch by Stefan Roese, 11 Jul 2003:
3718 - Fix bug in CONFIG_VERSION_VARIABLE.
3719 - AR405 config updated.
3720 - OCRTC/ORSG: bsp command added.
3721 - ASH405 bsp update.
3722
wdenkdccbda02003-07-14 22:13:32 +00003723======================================================================
3724Changes for U-Boot 0.4.2:
3725======================================================================
3726
wdenk69141282003-07-07 20:07:54 +00003727* Add support for NSCU board
3728
3729* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
3730
3731* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
3732 mirror bit flash on TQM8xxM modules
3733
wdenkf287a242003-07-01 21:06:45 +00003734* Patch by Kenneth Johansson, 30 Jun 2003:
3735 get rid of MK_CMD_ENTRY macro; update doc/README.command
3736
wdenkb9bbd242003-06-30 16:24:52 +00003737* Patch by Seb James, 30 Jun 2003:
3738 Improve documentation of I2C configuration in README
3739
3740* Fix problems with previous log buffer "fixes"
3741
3742* Fix minor help text issues
3743
3744* "log append" did not append a newline
3745
3746======================================================================
wdenkf12e3962003-06-29 21:03:46 +00003747Changes for U-Boot 0.4.1:
wdenkc08f1582003-04-27 22:52:51 +00003748======================================================================
3749
wdenkf12e3962003-06-29 21:03:46 +00003750* Fix some missing commands, cleanup header files
3751 (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
3752
wdenk3086a972003-06-28 23:11:04 +00003753* Rewrite command lookup and help command (fix problems with bubble
3754 sort when sorting command name list). Minor cleanup here and there.
3755
wdenkd9fce812003-06-28 17:24:46 +00003756* Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
3757 - Allow to call sysmon function interactively
3758 - PIC on LWMON board needs delay after power-on
3759 - Add missing RSR definitions for MPC8xx
3760 - Improve log buffer handling: guarantee clean reset after power-on
wdenkde887eb2003-09-10 18:20:28 +00003761 - Add support for EXBITGEN board (aka "genie")
wdenkd9fce812003-06-28 17:24:46 +00003762 - Add support for SL8245 board
3763
wdenk57b2d802003-06-27 21:31:46 +00003764* Code cleanup:
3765 - remove trailing white space, trailing empty lines, C++ comments, etc.
3766 - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
3767
3768* Patches by Kenneth Johansson, 25 Jun 2003:
3769 - major rework of command structure
3770 (work done mostly by Michal Cendrowski and Joakim Kristiansen)
3771
3772======================================================================
3773Changes for U-Boot 0.4.0:
3774======================================================================
3775
wdenk70764a32003-06-26 22:04:09 +00003776* Patches by Robert Schwebel, 26 Jun 2003:
wdenk57b2d802003-06-27 21:31:46 +00003777 - csb226 configuration updated
3778 - credits for logodl port updated
3779 - innokom configuration updated
3780 - logodl tree update, still with coding style inconsistencies
3781 - added OCM for ppc405 warning to README
wdenk70764a32003-06-26 22:04:09 +00003782
3783* Patch by Pantelis Antoniou, 25 Jun 2003:
3784 update NetVia with V2 board support
3785
wdenkbb2d9272003-06-25 22:26:29 +00003786* Header file cleanup for ARM
3787
3788* Patch by Murray Jensen, 24 Jun 2003:
3789 - make sure to use only U-boot provided header files
3790 - fix problems with ".rodata.str1.4" section as used by GCC-3.x
3791
stroeseab2751b2003-06-24 14:32:24 +00003792* Patch by Stefan Roese, 24 Jun 2003:
3793 - Update esd ASH405 board files.
3794 - Update esd DASA_SIM config file.
3795 - Add ping command to some esd boards.
3796
wdenk88d2ba92003-06-23 18:12:28 +00003797* Patch by Yuli Barcohen, 23 Jun 2003:
3798 Update for MPC8260ADS board
3799
3800* Patch by Murray Jensen, 23 Jun 2003:
3801 - cleanup of GCC 3.x compiler warnings
3802
wdenk56958612003-06-22 17:18:28 +00003803* Patch by Rune Torgersen, 4 Jun 2003:
3804 add large memory support for MPC8266ADS board
stroeseab2751b2003-06-24 14:32:24 +00003805
wdenk56958612003-06-22 17:18:28 +00003806* Patch by Richard Woodruff, 19 June 03:
3807 - Enabled standard u-boot device abstraction for ARM
3808 - Enabled console device for ARM
3809 - Initilized bi_baudrate for ARM
3810
3811* Patch by Bill Hargen, 23 Apr 2003:
3812 fix byte order for 824x I2C addresses (write op)
3813
wdenkdbae5042003-06-21 00:17:24 +00003814* Patch by Murray Jensen, 20 Jun 2003:
3815 - hymod update
3816 - cleanup (especially for gcc-3.x compilers)
3817
wdenkaaf48a92003-06-20 23:10:58 +00003818* Patch by Tom Guilliams, 20 Jun 2003:
3819 added CONFIG_750FX support for IBM 750FX processors
3820
wdenk8aeb24e2003-06-20 22:36:30 +00003821* Patch by Devin Crumb, 02 Apr 2003:
3822 Fix clock divider rounding problem in drivers/serial.c
3823
3824* Patch by Richard Woodruff, 19 June 03:
3825 - Fixed smc91c111 driver to sync with the u-boot environment
3826 (driver/smc91c111.c).
wdenk3e8b7dc2003-06-19 23:58:30 +00003827 - Added eth_init error return check in NetLoop (net/net.c).
3828
wdenk8aeb24e2003-06-20 22:36:30 +00003829* Patch by Ken Chou, 19 June 2003:
wdenk3e8b7dc2003-06-19 23:58:30 +00003830 Added support for A3000 SBC board (Artis Microsystems Inc.)
3831
wdenkb00ec162003-06-19 23:40:20 +00003832* Patches by Murray Jensen, 17 Jun 2003:
3833 - Hymod board database mods: add "who" field and new xilinx chip types
3834 - provide new "init_cmd_timeout()" function so code external to
3835 "common/main.c" can use the "reset_cmd_timeout()" function before
3836 entering the main loop
3837 - add DTT support for adm1021 (new file dtt/adm1021.c; config
3838 slightly different. see include/configs/hymod.h for an example
3839 (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
3840 CFG_DTT_ADM1021 defined)
3841 - add new "eeprom_probe()" function which has similar args and
3842 behaves in a similar way to "eeprom_read()" etc.
3843 - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
3844 function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
3845 - gdbtools copyright update
3846 - ensure that set_msr() executes the "sync" and "isync" instructions
3847 after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
3848 - 8260 I/O ports fix: Open Drain should be set last when configuring
3849 - add SIU IRQ defines for 8260
3850 - allow LDSCRIPT override and OBJCFLAGS initialization: change to
3851 config.mk to allow board configurations to override the GNU
3852 linker script, selected via the LDSCRIPT, make variable, and to
3853 give an initial value to the OBJCFLAGS make variable
3854 - 8260 i2c enhancement:
3855 o correctly extends the timeout depending on the size of all
3856 queued messages for both transmit and receive
3857 o will not continue with receive if transmit times out
3858 o ensures that the error callback is done for all queued tx
3859 and rx messages
3860 o correctly detects both tx and rx timeouts, only delivers one to
3861 the callback, and does not overwrite an earlier error
3862 o logic in i2c_probe now correct
3863 - add "vprintf()" function so that "panic()" function can be
3864 technically correct
3865 - many Hymod board changes
3866
wdenk88e72a32003-06-19 23:04:19 +00003867* Patches by Robert Schwebel, 14 Jun 2003:
3868 - add support for Logotronic DL datalogger board
3869 - cleanup serial line after kermit binary download
3870 - add debugX macro (debug level support)
3871 - update mach-types.h to latest arm.linux.org.uk master list.
3872
wdenk7539dea2003-06-19 23:01:32 +00003873* Patches by David Müller, 12 Jun 2003:
3874 - rewrite of the S3C24X0 register definitions stuff
3875 - "driver" for the built-in S3C24X0 RTC
3876
3877* Patches by Yuli Barcohen, 12 Jun 2003:
3878 - Add MII support and Ethernet PHY initialization for MPC8260ADS board
3879 - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
3880 configuration word supplied by FPGA on some MPC8260ADS boards
3881
3882* Patch by Pantelis Antoniou, 10 Jun 2003:
3883 Unify status LED interface
3884
wdenkd155afb2003-06-18 20:22:24 +00003885* Add support for DS12887 RTC; add RTC support for ATC board
3886
wdenk381669a2003-06-16 23:50:08 +00003887* Patch by Nicolas Lacressonniere, 11 Jun 2003:
3888 Modifications for Atmel AT91RM9200DK ARM920T based development kit
3889 - Add Atmel DataFlash support for reading and writing.
stroeseab2751b2003-06-24 14:32:24 +00003890 - Add possibility to boot a Linux from DataFlash with BOOTM command.
wdenk381669a2003-06-16 23:50:08 +00003891 - Add Flash detection on Atmel AT91RM9200DK
3892 (between Atmel AT49BV1614 and AT49BV1614A flashes)
3893 - Replace old Ethernet PHY layer functions
3894 - Change link address
3895
3896* Patch by Frank Smith, 9 Jun 2003:
3897 use CRIT_EXCEPTION for machine check on 4xx
3898
3899* Patch by Detlev Zundel, 13 Jun 2003:
3900 added implementation of the "carinfo" command in cmd_immap.c
3901
wdenk7a428cc2003-06-15 22:40:42 +00003902* Fix CONFIG_NET_MULTI support in include/net.h
3903
3904* Patches by Kyle Harris, 13 Mar 2003:
3905 - Add FAT partition support
3906 - Add command support for FAT
3907 - Add command support for MMC
3908 ----
3909 - Add Intel PXA support for video
3910 - Add Intel PXA support for MMC
3911 ----
3912 - Enable MMC and FAT for lubbock board
3913 - Other misc changes for lubbock board
3914
wdenkb2abefb2003-06-06 11:20:01 +00003915* Patch by Robert Schwebel, April 02, 2003:
3916 fix for SMSC91111 driver
3917
wdenk77934442003-06-05 19:37:36 +00003918* Patch by Vladimir Gurevich, 04 Jun 2003:
3919 make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
3920
stroese98636162003-06-05 15:44:37 +00003921* Patch by Stefan Roese, 05 Jun 2003:
3922 - PPC4xx: Fix bug for initial stack in data cache as pointed out by
3923 Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
3924 data cache can be used even if the chip select is in use.
3925 - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
3926 (see README for further description).
3927 - Changed config files of CONFIG_EEPRO100 boards to use the
3928 CFG_RX_ETH_BUFFER define.
3929
wdenke6466f62003-06-05 19:27:42 +00003930* Add support for RMU board
3931
3932* Add support for TQM862L at 100/50 MHz
3933
3934* Patch by Pantelis Antoniou, 02 Jun 2003:
3935 major reconstruction of networking code;
3936 add "ping" support (outgoing only!)
3937
wdenke39c2842003-06-04 15:05:30 +00003938* Patch by Denis Peter, 04 June 2003:
3939 add support for the MIP405T board
3940
wdenk4e112c12003-06-03 23:54:09 +00003941* Patches by Udi Finkelstein, 2 June 2003:
3942 - Added support for custom keyboards, initialized by defining a
3943 board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
3944 - Added support for the RBC823 board.
3945 - cpu/mpc8xx/lcd.c now automatically calculates the
3946 Horizontal Pixel Count field.
3947
3948* Fix alignment problem in BOOTP (dhcp_leasetime option)
3949 [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
3950
3951* Patch by Mark Rakes, 14 May 2003:
3952 add support for Intel e1000 gig cards.
3953
3954* Patch by Nye Liu, 3 Jun 2003:
3955 fix critical typo in MAMR definition (include/mpc8xx.h)
3956
3957* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
3958
3959* Patch by Klaus Heydeck, 2 Jun 2003
3960 Minor changes for KUP4K configuration
3961
wdenkabda5ca2003-05-31 18:35:21 +00003962* Patch by Marc Singer, 29 May 2003:
3963 Fixed rarp boot method for IA32 and other little-endian CPUs.
3964
3965* Patch by Marc Singer, 28 May 2003:
3966 Added port I/O commands.
3967
3968* Patch by Matthew McClintock, 28 May 2003
3969 - cpu/mpc824x/start.S: fix relocation code when booting from RAM
3970 - minor patches for utx8245
3971
3972* Patch by Daniel Engström, 28 May 2003:
3973 x86 update
3974
3975* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
3976 add nand flash support to SXNI855T configuration
3977 fix/extend nand flash support:
3978 - fix 'nand erase' command so does not erase bad blocks
3979 - fix 'nand write' command so does not write to bad blocks
3980 - fix nand_probe() so handles no flash detected properly
3981 - add doc/README.nand
3982 - add .jffs2 and .oob options to nand read/write
3983 - add 'nand bad' command to list bad blocks
3984 - add 'clean' option to 'nand erase' to write JFFS2 clean markers
3985 - make NAND read/write faster
3986
3987* Patch by Rune Torgersen, 23 May 2003:
3988 Update for MPC8266ADS board
3989
wdenkb9a83a92003-05-30 12:48:29 +00003990* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
3991 instead CFG_MONITOR_LEN is now only used to determine _at_compile_
3992 _time_ (!) if the environment is embedded within the U-Boot image,
3993 or in a separate flash sector.
3994
3995* Cleanup CFG_DER #defines in config files (wd maintained only)
3996
wdenkf4688a22003-05-28 08:06:31 +00003997* Fix data abort exception handling for arm920t CPU
3998
3999* Fix alignment problems with flash driver for TRAB board
4000
4001* Patch by Donald White, 21 May 2003:
4002 fix calculation of base address in pci_hose_config_device()
4003
4004* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
4005 execute "cmd2", even if "cmd1" fails. Note that this is different
4006 to "run var1 var2" where the contents of "var2" will NOT be
4007 executed when a command in "var1" fails.
4008
wdenk6f770ed2003-05-23 23:18:21 +00004009* Add zero-copy ramdisk support (requires corresponding kernel support!)
4010
wdenk0463e042003-05-23 12:36:20 +00004011* Patch by Kyle Harris, 20 May 2003:
4012 In preparation for an ixp port, rename cpu/xscale and arch-xscale
4013 into cpu/pxa and arch-pxa.
4014
stroeseab38cf32003-05-23 11:49:24 +00004015* Patch by Stefan Roese, 23 May 2003:
4016 - IBM PPC405EP port added.
4017 - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
4018 UART0) is used as default U-Boot console. PPC4xx only!
4019 - esd ASH405 board added (PPC405EP based).
4020 - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
4021 - esd CPCI405AB board added.
4022 - esd PMC405 board added.
4023 - Update of some esd boards.
4024
wdenk7d076412003-05-23 11:38:58 +00004025* Patch by Denis Peter, 19 Mai 2003:
4026 add support for the MIP405-3 board
4027
wdenkbf2f8c92003-05-22 22:52:13 +00004028* Patch by Dave Ellis, 22 May 2003:
4029 Fix problem with only partially cleared .bss segment
4030
4031* Patch by Rune Torgersen, 12 May 2003:
4032 get PCI to work on a MPC8266ADS board; incorporate change to
4033 cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
4034
4035* Patch by Nye Liu, 1 May 2003:
4036 minor patches for the FADS8xx
4037
4038* Patch by Thomas Schäfer, 28 Apr 2003:
4039 Fix SPD handling for 256 ECC DIMM on Walnut
4040
wdenk6bd7b5d2003-05-21 20:26:20 +00004041* Add support for arbitrary bitmaps for TRAB's VFD command;
4042 allow to pass boot bitmap addresses in environment variables;
4043 allow for zero boot delay
wdenk26991552003-05-20 20:49:01 +00004044
4045* Patch by Christian Geißinger, 19 May 2002:
4046 On TRAB: wait until the dummy byte has been completely sent
4047
wdenk0893c472003-05-20 14:25:27 +00004048* Patch by David Updegraff, 22 Apr 2003:
4049 update for CrayL1 board
4050
4051* Patch by Pantelis Antoniou, 21 Apr 2003:
4052 add boot support for ARTOS (a proprietary OS)
4053
4054* Patch by Steven Scholz, 11 Apr 2003:
4055 Add support for RTC DS1338
4056
4057* Patch by Rod Boyce, 24 Jan 2003:
4058 Fix counting of extended partitions in diskboot command
4059
wdenkc394e392003-05-20 10:58:04 +00004060* Patch by Christophe Lindheimer, 20 May 2003:
4061 allow the use of CFG_LOADS when CFG_NO_FLASH is set
4062
wdenk6099e872003-05-20 10:39:44 +00004063* Fix SDRAM timing on Purple board
4064
wdenke5d61c72003-05-18 11:30:09 +00004065* Add support for CompactFlash on ATC board
4066 (includes support for Intel 82365 and compatible PC Card controllers,
4067 and Yenta-compatible PCI-to-CardBus controllers)
4068
wdenkaa603362003-05-12 21:50:16 +00004069* Patch by Mathijs Haarman, 08 May 2003:
4070 Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
4071
wdenke2e3f632003-05-03 23:33:47 +00004072* Fix problem with usage of "true" (undefined in current versions of bfd.h)
4073
wdenk541a76d2003-05-03 15:50:43 +00004074* Add support for Promess ATC board
4075
4076* Patch by Keith Outwater, 28 Apr 2003:
4077 - Miscellaneous corrections and additions to GEN860T board specific code.
4078 - Added GEN860_SC variant to GEN860T.
4079 - Miscellaneous corrections to GEN860T documentation.
4080 - Correct duplicate entry in U-Boot CREDITS file.
4081 - Add GEN860T_SC entry in MAINTAINERS file.
4082 - Update CREDITS file with GEN860T_SC info.
4083
4084* Update Smiths Aerospace addresses in MAINTAINERS file
4085
4086* Fix error handling in hush's version of "run" command
4087
wdenkc08f1582003-04-27 22:52:51 +00004088* LWMON extensions:
4089 - Splashscreen support
4090 - modem support
4091 - sysmon support
4092 - temperature dependend enabling of LCD
4093
4094* Allow booting from old "PPCBoot" disk partitions
4095
4096* Add support for TQM8255 Board / MPC8255 CPU
4097
4098======================================================================
wdenkedaa4892003-04-20 17:41:25 +00004099Changes for U-Boot 0.3.1:
wdenk6bd14892003-04-10 11:18:18 +00004100======================================================================
4101
wdenk92bbe3f2003-04-20 14:04:18 +00004102* Make sure Block Lock Bits get cleared in R360MPI flash driver
4103
4104* MPC823 LCD driver: Fill color map backwards, to allow for steady
4105 display when Linux takes over
4106
4107* Patch by Erwin Rol, 27 Feb 2003:
4108 Add support for RTEMS (this time for real).
4109
4110* Add support for "bmp info" and "bmp display" commands to load
4111 bitmap images; this can be used (for example in a "preboot"
4112 command) to display a splash screen very quickly after poweron.
4113
4114* Add support for 133 MHz clock on INCA-IP board
4115
wdenk3f9ab982003-04-12 23:38:12 +00004116* Patch by Lutz Dennig, 10 Apr 2003:
4117 Update for R360MPI board
4118
4119* Add new meaning to "autostart" environment variable:
4120 If set to "no", a standalone image passed to the
4121 "bootm" command will be copied to the load address
4122 (and eventually uncompressed), but NOT be started.
4123 This can be used to load and uncompress arbitrary
4124 data.
4125
stroeseee14b832003-04-10 13:30:28 +00004126* Patch by Stefan Roese, 10 Apr 2003:
wdenk3f9ab982003-04-12 23:38:12 +00004127 Changed DHCP client to use IP address from server option field #54
4128 from the OFFER packet in the server option field #54 in the REQUEST
4129 packet. This fixes a problem using a Windows 2000 DHCP server,
4130 where the DHCP-server is not the TFTP-server.
4131
4132* Set max brightness for MN11236 displays on TRAB board
stroeseee14b832003-04-10 13:30:28 +00004133
wdenk6bd14892003-04-10 11:18:18 +00004134* Add support for TQM862L modules
4135
4136======================================================================
wdenka6db71d2003-04-08 23:25:21 +00004137Changes for U-Boot 0.3.0:
wdenkeda42082003-01-17 16:27:01 +00004138======================================================================
4139
wdenkb02744a2003-04-05 00:53:31 +00004140* Patch by Arun Dharankar, 4 Apr 2003:
4141 Add IDMA example code (tested on 8260 only)
4142
4143* Add support for Purple Board (MIPS64 5Kc)
4144
4145* Add support for MIPS64 5Kc CPUs
4146
4147* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
4148
4149* Patch by Denis Peter, 04 Apr 2003:
4150 - update MIP405-4 board
4151
stroese2606cf12003-04-04 16:55:30 +00004152* Patch by Stefan Roese, 4 Apr 2003:
4153 - U-Boot version environment variable "ver" added
4154 (CONFIG_VERSION_VARIABLE).
4155 - Changed PPC405GPr version from A to B.
4156 - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
4157
wdenkb02744a2003-04-05 00:53:31 +00004158* Patches by Denis Peter, 03 April 2003:
4159 - fix PCI IRQs on MPL boards
4160 - fix two more un-relocated pointer problems
4161
4162* Fix behaviour of "run" command:
4163 - print error message iv variable does not exist
4164 - terminate processing of arguments in case of error
4165
4166* Patches by Peter Figuli, 10 Mar 2003
4167 - Add support for BTUART on PXA platform
4168 - Add support for WEP EP250 (PXA) board
4169
4170* Fix flash problems on INCA-IP; add tool to allow bruning images to
4171 flash using a BDI2000
4172
4173* Implement fix for I2C Edge Conditions problem for all boards that
4174 use the bit-banging driver (common/soft_i2c.c)
4175
wdenk359733b2003-03-31 17:27:09 +00004176* Patch by Martin Winistoerfer, 23 Mar 2003
4177 - Add port to MPC555/556 microcontrollers
4178 - Add support for cmi customer board with
4179 Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
4180
4181* Patch by Rick Bronson, 28 Mar 2003:
4182 - fix common/cmd_nand.c
4183
wdenk8dba0502003-03-31 16:34:49 +00004184* Patch by Arun Dharankar, 24 Mar 2003:
4185 - add threads / scheduler example code
4186
4187* Add patches by Robert Schwebel, 31 Mar 2003:
4188 - add ctrl-c support for kermit download
4189 - align bdinfo output on ARM
wdenkb02744a2003-04-05 00:53:31 +00004190 - csb226 board: bring in sync with innokom/memsetup.S
4191 - csb226 board: fix MDREFR handling
4192 - misc doc fixes / extensions
4193 - innokom board: cleanup, MDREFR fix in memsetup.S, config update
4194 - add BOOT_PROGRESS to armlinux.c
wdenk8dba0502003-03-31 16:34:49 +00004195
stroese2606cf12003-04-04 16:55:30 +00004196* Add CPU ID, version, and clock speed for INCA-IP
wdenk8dba0502003-03-31 16:34:49 +00004197
wdenk5840af22003-03-28 14:40:36 +00004198* Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
4199 - fix SRAM and SDRAM memory sizing
4200 - add status LED support
4201 - add MAC address for second (SCC1) ethernet port
4202
4203* Update default environment for TQM8260 board
4204
wdenkc8434db2003-03-26 06:55:25 +00004205* Patch by Rick Bronson, 16 Mar 2003:
wdenkbb1b8262003-03-27 12:09:35 +00004206 - Add NAND flash support for reading, writing, and erasing NAND
4207 flash (certain forms of which are called SmartMedia).
4208 - Add support for Atmel AT91RM9200DK ARM920T based development kit.
wdenkc8434db2003-03-26 06:55:25 +00004209
4210* Patches by Robert Schwebel, 19 Mar 2003:
4211 - use arm-linux-gcc as default compiler for ARM
4212 - fix i2c fixup code
4213 - fix missing baudrate setting
4214 - added $loadaddr / CFG_LOAD_ADDR support to loadb
4215 - moved "ignoring trailing characters" _before_ u-boot wants to
4216 print out diagnostics messages; removes bogus characters at the
4217 end of transmission
4218
4219* Patch by John Zhan, 18 Mar 2003:
4220 Add support for SinoVee Microsystems SC8xx boards
4221
4222* Patch by Rolf Offermanns, 21 Mar 2003:
4223 ported the dnp1110 related changes from the current armboot cvs to
4224 current u-boot cvs. smc91111 does not work. problem marked in
4225 smc91111.c, grep for "FIXME".
4226
4227* Patch by Brian Auld, 25 Mar 2003:
4228 Add support for STM flash chips on ebony board
4229
wdenk28536032003-03-25 16:50:56 +00004230* Add PCI support for MPC8250 Boards (PM825 module)
4231
stroesea95be4d2003-03-25 14:44:48 +00004232* Patch by Stefan Roese, 25 Mar 2003:
4233 - PCI405 update.
4234
stroesef2afa912003-03-20 15:32:59 +00004235* Patch by Stefan Roese, 20 Mar 2003:
4236 - CPCI4052 update (support for revision 3).
4237 - Set edge conditioning circuitry on PPC405GPr for compatibility
4238 to existing PPC405GP designs.
4239 - Clip udiv to 5 bits on PPC405 (serial.c).
4240
wdenkbb1b8262003-03-27 12:09:35 +00004241* Extend INCAIP board support:
4242 - add automatic RAM size detection
4243 - add "bdinfo" command
4244 - pass flash address and size to Linux kernel
4245 - switch to 150 MHz clock
4246
wdenk6b58f332003-03-14 20:47:52 +00004247* Avoid flicker on the TRAB's VFD by synchronizing the enable with
4248 the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
4249 boards, version 153 for Rev. 200 boards).
4250
4251* Patch by Vladimir Gurevich, 12 Mar 2003:
4252 Fix relocation problem of statically initialized string pointers
4253 in common/cmd_pci.c
4254
4255* Patch by Kai-Uwe Blöm, 12 Mar 2003:
4256 Cleanup & bug fixes for JFFS2 code:
4257 - the memory mangement was broken. It caused havoc on malloc by
4258 writing beyond the block boundaries.
4259 - the length calculation for files was wrong, sometimes resulting
4260 in short file reads.
4261 - data copying now optionally takes fragment version numbers into
4262 account, to avoid copying from older data.
4263 See doc/README.JFFS2 for details.
4264
wdenkef5fe752003-03-12 10:41:04 +00004265* Patch by Josef Wagner, 12 Mar 2003:
4266 - 16/32 MB and 50/80 MHz support with auto-detection for IP860
4267 - ETH05 and BEDBUG support for CU824
4268 - added support for MicroSys CPC45
4269 - new BOOTROM/FLASH0 and DOC base for PM826
4270
4271* Patch by Robert Schwebel, 12 Mar 2003:
4272 Fix the chpart command on innokom board
4273
4274* Name cleanup:
4275 mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
4276 s/PPCBoot/U-Boot/ in some files
4277 s/pImage/uImage/ in some files
4278
4279* Patch by Detlev Zundel, 15 Jan 2003:
4280 Fix '' command line quoting
4281
4282* Patch by The LEOX team, 19 Jan 2003:
4283 - add support for the ELPT860 board
4284 - add support for Dallas ds164x RTC
4285
wdenk1fe2c702003-03-06 21:55:29 +00004286* Patches by David Müller, 31 Jan 2003:
4287 - minimal setup for CardBus bridges
4288 - add EEPROM read/write support in the CS8900 driver
4289 - add support for the builtin I2C controller in the Samsung s3c24x0 chips
wdenkef5fe752003-03-12 10:41:04 +00004290 - add support for MPL's VCMA9 (Samsung s3c2410 based) board
wdenk1fe2c702003-03-06 21:55:29 +00004291
4292* Patch by Steven Scholz, 04 Feb 2003:
4293 add support for RTC DS1307
4294
4295* Patch by Reinhard Meyer, 5 Feb 2003:
4296 fix PLPRCR/SCCR init sequence on 8xx to allow for
4297 changes of EBDF by software
4298
4299* Patch by Vladimir Gurevich, 07 Feb 2003:
4300 "API-compatibility patch" for 4xx I2C driver
4301
4302* TRAB fixes / extensions:
4303 - Restore VFD brightness as saved in environment
wdenkd155afb2003-06-18 20:22:24 +00004304 - add support for Fujitsu flashes
wdenk1fe2c702003-03-06 21:55:29 +00004305 - make sure both buzzers are turned off (drive low level)
4306
wdenkcc1e2562003-03-06 13:39:27 +00004307* Patches by Robert Schwebel, 06 Mar 2003:
4308 - fix bug in BOOTP code (must use NetCopyIP)
4309 - update of CSB226 port
4310 - clear BSS segment on XScale
4311 - added support for i2c_init_board() function
4312 - update to the Innokom plattform
4313
4314* Extend support for redundand environments for configurations where
4315 environment size < sector size
4316
wdenkb666c8f2003-03-06 00:58:30 +00004317* Patch by Rune Torgersen, 13 Feb 2003:
4318 Add support for Motorola MPC8266ADS board
4319
4320* Patch by Kyle Harris, 19 Feb 2003:
4321 patches for the Intel lubbock board:
4322 memsetup.S - general cleanup (based on Robert's csb226 code)
4323 flash.c - overhaul, actually works now
4324 lubbock.c - fix init funcs to return proper value
4325
4326* Patch by Kenneth Johansson, 26 Feb 2003:
stroesef2afa912003-03-20 15:32:59 +00004327 - Fixed off by one in RFTA calculation.
wdenkb666c8f2003-03-06 00:58:30 +00004328 - No need to abort when LDF is lower than we can program it's only
stroesef2afa912003-03-20 15:32:59 +00004329 minimum timing so clamp it to what we can do.
wdenkb666c8f2003-03-06 00:58:30 +00004330 - Takes function pointer to function for reading the spd_nvram. Usefull
4331 for faking data or hardcode a module without the nvram.
4332 - fix other user for above change
4333 - fix some comments.
4334
4335* Patches by Brian Waite, 26 Feb 2003:
4336 - fix port for evb64260 board
4337 - fix PCI for evb64260 board
4338 - fix PCI scan
4339
4340* Patch by Reinhard Meyer, 1 Mar 2003:
4341 Add support for EMK TOP860 Module
4342
4343* Patch by Yuli Barcohen, 02 Mar 2003:
4344 Add SPD EEPROM support for MPC8260ADS board
4345
wdenk4a5c8a72003-03-06 00:02:04 +00004346* Patch by Robert Schwebel, 21 Jan 2003:
4347 - Add support for Innokom board
4348 - Don't complain if "install" fails
4349 - README cleanup (remove duplicated lines)
4350 - Update PXA header files
4351
4352* Add documentation for existing POST code (doc/README.POST)
4353
4354* Patch by Laudney Ren, 15 Jan 2003:
4355 Fix handling of redundand environment in "tools/envcrc.c"
4356
4357* Patch by Detlev Zundel, 28 Feb 2003:
4358 Add bedbug support for 824x systems
4359
4360* Add support for 16 MB flash configuration of TRAB board
4361
4362* Patch by Erwin Rol, 27 Feb 2003:
4363 Add support for RTEMS
4364
4365* Add image information to README
4366
stroesefd4b5a72003-02-18 11:30:24 +00004367* Patch by Stefan Roese, 18 Feb 2003:
4368 CPCIISER4 configuration updated.
4369
stroese85d0fec2003-02-17 16:06:06 +00004370* Patch by Stefan Roese, 17 Feb 2003:
4371 Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
4372
stroesef5dd4102003-02-14 11:21:23 +00004373* Patch by Stefan Roese, 13 Feb 2003:
4374 Add "pcidelay" environment variable (in ms, enabled via
4375 CONFIG_PCI_BOOTDELAY).
4376 PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
4377 RST# to respond to configuration cycles (33MHz -> 1s).
4378
wdenk4a5c8a72003-03-06 00:02:04 +00004379* Fix dual PCMCIA slot support (when running with just one
4380 slot populated)
4381
4382* Add VFD type detection to trab board
4383
4384* extend drivers/cs8900.c driver to synchronize ethaddr environment
4385 variable with value in the EEPROM
4386
stroese91ee5282003-02-10 16:39:00 +00004387* Patch by Stefan Roese, 10 Feb 2003:
4388 Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
4389
wdenkbb1b8262003-03-27 12:09:35 +00004390* Add support for MIPS32 4Kc CPUs
4391
4392* Add support for INCA-IP Board
4393
wdenk4a5c8a72003-03-06 00:02:04 +00004394======================================================================
4395Changes for U-Boot 0.2.2:
4396======================================================================
4397
wdenkeda42082003-01-17 16:27:01 +00004398* Add dual ethernet support on PM826
4399
4400* Add support for LXT971 PHY on PM826
4401
4402* Patch by Tord Andersson, 16 Jan 2003:
4403 Fix flash sector count for TQM8xxL
4404
4405* Fix I2C EEPROM problem on ICU862 board (would only write the first
4406 16 bytes out of each 32 byte block)
4407
4408======================================================================
4409Changes for U-Boot 0.2.1:
wdenk2f87a3f2002-12-20 23:42:25 +00004410======================================================================
4411
wdenk2dad91b2003-01-13 23:54:46 +00004412* Add support for V37 board
4413 (patch by Jón Benediktsson, 11 Dec 2002)
4414
wdenke7f34c62003-01-11 09:48:40 +00004415* Update baudrate in bd_info when it gets changed
4416
4417* Add watchdog trigger points while waiting for serial port
4418 (so far only 8xx -- needed on LWMON with 100ms watchdog)
4419
4420* Improve command line tool to access the U-Boot's environment
4421 (figuration of the utility, using a config file)
4422
wdenk654868c2003-01-02 23:57:29 +00004423* Add single quote support for (old) command line parser
4424
wdenk2f87a3f2002-12-20 23:42:25 +00004425* Switch LWMON board default config from FRAM to EEPROM;
4426 in POST, EEPROM shows up on 8 addresses
4427
4428======================================================================
wdenka08708c2002-12-17 18:07:30 +00004429Changes for U-Boot 0.2.0:
wdenk24ee89b2002-11-03 17:56:27 +00004430======================================================================
4431
wdenk34b613e2002-12-17 01:51:00 +00004432* Use 1-byte-read instead of -write for iprobe() function
4433 Add i2c commands to PM826 config
4434
4435* extend I2C POST code: check for list on known addresses
4436
wdenk9dfa8d12002-12-08 09:53:23 +00004437* Improve log buffer code; use "loglevel" to decide which messages
4438 to log on the console, too (like in Linux); get rid of "logstart"
4439
4440* Add command line tool to access the U-Boot's environment
4441 (board-specific for TRAB now, to be fixed later)
4442
wdenkbb444c92002-12-07 00:20:59 +00004443* Patch by Hans-Joerg Frieden, 06 Dec 2002
4444 Fix misc problems with AmigaOne support
4445
4446* Patch by Chris Hallinan, 3 Dec 2002:
4447 minor cleanup to the MPC8245 EPIC driver
4448
4449* Patch by Pierre Aubert , 28 Nov 2002
4450 Add support for external (SIU) interrupts on MPC8xx
4451
4452* Patch by Pierre Aubert , 28 Nov 2002
4453 Fix nested syscalls bug in standalone applications
4454
4455* Patch by David Müller, 27 Nov 2002:
4456 fix output of "pciinfo" command for CardBus bridge devices.
4457
4458* Fix bug in TQM8260 board detection - boards got stuck when board ID
4459 was not readable
4460
wdenk90e7e422002-12-04 23:39:58 +00004461* Add LED indication for IDE activity on KUP4K board
4462
wdenk9dd2b882002-12-03 21:28:10 +00004463* Fix startup problems with VFD display on TRAB
4464
4465* Patch by Pierre Aubert, 20 Nov 2002
4466 Add driver for Epson SED13806 graphic controller.
4467 Add support for BMP logos in cfb_console driver.
4468
wdenk2029f4d2002-11-21 23:11:29 +00004469* Added support for both PCMCIA slots (at the same time!) on MPC8xx
4470
4471* Patch by Rod Boyce, 21 Nov 2002:
4472 fix PCMCIA on MBX8xx board
4473
4474* Patch by Pierre Aubert , 21 Nov 2002
4475 Add CFG_CPM_POST_WORD_ADDR to make the offset of the
4476 bootmode word in DPRAM configurable
4477
wdenk67ff36c2002-11-19 23:01:07 +00004478* Patch by Daniel Engström, 18 Nov 2002:
4479 Fixes for x86 port (mostly strings issues)
4480
4481* Patch by Ken Chou, 18 Nov 2002:
4482 Fix for natsemi NIC cards (DP83815)
4483
4484* Patch by Pierre Aubert, 19 Nov 2002:
4485 fix a bug for the MII configuration, and some warnings
4486
wdenk452cfd62002-11-19 11:04:11 +00004487* Patch by Thomas Frieden, 13 Nov 2002:
4488 Add code for AmigaOne board
4489 (preliminary merge to U-Boot, still WIP)
4490
4491* Patch by Jon Diekema, 12 Nov 2002:
4492 - Adding URL for IEEE OUI lookup
4493 - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
4494 being defined.
4495 - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
4496 root-on-nfs macros are designed to switch how the default boot
4497 method gets defined.
4498
wdenk591dda52002-11-18 00:14:45 +00004499* Patch by Daniel Engström, 13 Nov 2002:
4500 Add support for i386 architecture and AMD SC520 board
4501
4502* Patch by Pierre Aubert, 12 Nov 2002:
4503 Add support for DOS filesystem and booting from DOS floppy disk
4504
wdenk2582f6b2002-11-11 21:14:20 +00004505* Patch by Jim Sandoz, 07 Nov 2002:
4506 Increase number of network RX buffers (PKTBUFSRX in
4507 "include/net.h") for EEPRO100 based boards (especially SP8240)
4508 which showed "Receiver is not ready" errors when U-Boot was
4509 processing the receive buffers slower than the network controller
4510 was filling them.
4511
wdenkc217f6d2002-11-11 02:11:37 +00004512* Patch by Andreas Oberritter, 09 Nov 2002:
4513 Change behaviour of NetLoop(): return -1 for errors, filesize
4514 otherwise; return code 0 is valid an means no file loaded - in this
4515 case the environment still gets updated!
4516
4517* Patches by Jon Diekema, 9 Nov 2002:
4518 - improve ADC/DAC clocking on the SACSng board to align
4519 the failing edges of LRCLK and SCLK
4520 - sbc8260 configuration tweaks
4521 - add status LED support for 82xx systems
4522 - wire sspi/sspo commands into command handler; improved error
4523 handlering
4524 - add timestamp support and alternate memory test to the
4525 SACSng configuration
4526
4527* Patch by Vince Husovsky, 7 Nov 2002:
wdenk1272e232002-11-10 22:06:23 +00004528 Add "-n" to linker options to get rid of "Not enough room for
4529 program headers" problem
4530
4531* Patch by David Müller, 05 Nov 2002
4532 Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
4533 so we can use an already existing name
4534
4535* Patch by Pierre Aubert, 05 Nov 2002
4536 Hardware relatied improvments in FDC boot code
4537
4538* Patch by Holger Schurig, 5 Nov 2002:
4539 Make the PXA really change it's frequency
4540
4541* Patch by Pierre Aubert, 05 Nov 2002
4542 Add support for slave serial Spartan 2 FPGAs
4543
4544* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
4545 drivers
4546
wdenk56f94be2002-11-05 16:35:14 +00004547* Add support for log buffer which can be passed to Linux kernel's
4548 syslog mechanism; used especially for POST results.
4549
4550* Patch by Klaus Heydeck, 31 Oct 2002:
4551 Add initial support for kup4k board
4552
wdenk384ae022002-11-05 00:17:55 +00004553* Patch by Robert Schwebel, 04 Nov 2002:
4554 - use watchdog to reset PXA250 systems
4555 - added progress callbacks to (some of the) ARM code
4556 - update for Cogent CSB226 board
4557
4558* Add support for FPS860 board
4559
wdenke95b61c2002-11-04 16:02:40 +00004560* Patch by Guillaume Alexandre,, 04 Nov 2002:
4561 Improve PCI access on 32-bits Compact PCI bus
4562
wdenk24ee89b2002-11-03 17:56:27 +00004563* Fix mdelay() on TRAB - this was still the debugging version with
4564 seconds instead of ms.
4565
4566* Patch by Robert Schwebel, 1 Nov 2002:
4567 XScale related cleanup (affects all ARM boards)
4568
4569* Cleanup of names and README.
wdenkcc1c8a12002-11-02 22:58:18 +00004570
4571======================================================================
wdenk24ee89b2002-11-03 17:56:27 +00004572Notes for U-Boot 0.1.0:
wdenkcc1c8a12002-11-02 22:58:18 +00004573======================================================================
4574
4575This is the initial version of "Das U-Boot", the Universal Boot Loader.
4576
4577It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
4578For information about the history of the project please see the
4579PPCBoot project page at http://sourceforge.net/projects/ppcboot
4580
4581======================================================================