blob: 89375c91bca6b72c0d458b909a8d720561e92ac8 [file] [log] [blame]
wdenk24ee89b2002-11-03 17:56:27 +00001======================================================================
wdenk6c59edc2004-05-03 20:45:30 +00002Changes since U-Boot 1.1.1:
3======================================================================
4
wdenk767fbd42004-10-10 18:41:04 +00005* Patch by George G. Davis, 24 Aug 2004:
6 - update ARM boards to use constants from mach-types.h
7
wdenkcbb52882004-10-10 18:03:33 +00008* Patch by Gary Jennejohn, 04 Oct 2004:
9 - fix I2C on at91rm9200
10 - add support for Ricoh RS5C372A RTC
11
wdenk70ae5b42004-10-10 17:05:18 +000012* Patch by Gary Jennejohn, 01 Oct 2004:
13 - add support for CMC PU2 board
14 - add support for I2C on at91rm9200
15
16* Patch by Gary Jennejohn, 28 Sep 2004:
17 fix baudrate handling on at91rm9200
18
wdenk02075fd2004-10-09 23:33:42 +000019* Patch by Yuli Barcohen, 22 Aug 2004:
20 - remove ZPC.1900 board-specific flash driver;
21 switch the port to generic CFI driver;
22 - port clean-up
23
wdenke4ef9e82004-10-09 23:28:40 +000024* Patch by Hinko Kocevar, 21 Aug 2004:
25 Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
26
wdenk9ca7bbc2004-10-09 23:25:58 +000027* Clean up tools/bmp_logo.c to not add trailing white space
28
29* Patch by Hinko Kocevar, 21 Aug 2004:
30 - Group common framebuffer functions in common/lcd.c
31 - Group common framebuffer macros and #defines in include/lcd.h
32 - Provide calc_fbsize() for video ATAG
33
wdenkfb30b4c2004-10-09 22:44:59 +000034* Patch by Sam Song, 21 August 2004:
35 - Fix a typo in README
36 - Align "(RO)" output for "flinfo" after "protect on"
37 - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
38 ratio 1:1 when core frequency less than 50MHz
39
wdenk9ca7bbc2004-10-09 23:25:58 +000040* Patches by Hinko Kocevar, 21 Aug 2004:
wdenk5fa9b392004-10-09 22:32:26 +000041 - fix some "use of label at end of compound statement" warnings
42 - Define type of LCD panel on lubbock board if CONFIG_LCD is used
43
wdenkf8e9a232004-10-09 22:21:29 +000044* Patch by Steven Scholz, 16 Aug 2004:
45 - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
46 - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
47 - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
48 - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
49 into cpu/arm920t/$(SOC)/
50
wdenk57bfdd42004-09-29 22:55:14 +000051* Patches by Sean Chang, 09 Aug 2004:
52 - Added support for both 8 and 16 bit mode access to System ACE CF
53 through MPU.
54 - Fixed missing System ACE CF device during get FAT partition info
55 in fat_register_device function.
56 - Enabled System ACE CF support on ML300.
57
58* Patch by Sean Chang, 09 Aug 2004:
59 Synch defines for saveenv and do_saveenv functions so they get
60 compiled under the same statement.
61
62* Patch by Sean Chang, 09 Aug 2004:
wdenk97e8bda2004-09-29 22:43:59 +000063 - Added I2C support for ML300.
64 - Added support for ML300 to read out its environment information
65 stored on the EEPROM.
66 - Added support to use board specific parameters as part of
67 U-Boot's environment information.
68 - Updated MLD files to support configuration for new features
69 above.
70
wdenk57bfdd42004-09-29 22:55:14 +000071* Patches by Travis Sawyer, 05 Aug 2004:
wdenk97e8bda2004-09-29 22:43:59 +000072 - Remove incorrect bridge settings for eth group 6
73 - Add call to setup bridge in ppc_440x_eth_initialize
74 - Fix ppc_440x_eth_init to reset the phy only if its the
75 first time through, otherwise, just check the phy for the
76 autonegotiated speed/duplex. This allows the use of netconsole
77 - only print the speed/duplex the first time the phy is reset.
78
wdenk7d1eb822004-09-29 11:02:56 +000079* Patch by Shlomo Kut, 29 Mar 2004:
80 Add support for MKS Instruments "Quantum" board
81
82* Fix build problem with Cogent boards;
83 avoid using <asm/byteorder.h> when using the host compiler
84
wdenkd9ee50d2004-09-28 21:51:42 +000085* Patch by Ganapathi C, 04 Aug 2004:
86 Fix NFS timeout issue
87
wdenk99651602004-09-28 21:39:45 +000088* Patch by Yuli Barcohen, 19 Jul 2004:
89 - Fix host tools building in Cygwin environment
90 - Fix header files search order for host tools
91
92* Patch by Tom Armistead, 19 Jul 2004:
93 Fix kgdb.S support for 74xx_75x cpu
94
wdenka9799ed2004-09-28 21:26:26 +000095* Patch by Jon Loeliger, 15 Jul 2004:
96 Fix MPC85xx I2C driver
97
wdenke2d6d742004-09-28 20:34:50 +000098* Fix problems with CDROM drive as slave device on Lite5200 IDE bus.
99
wdenk5b835a32004-09-28 19:00:19 +0000100* Patch by Stephen Williams, 15 July 2004
101 Set the PCI class code for JSE board as part of PCI interface setup
102
103* Patch by Michael Bendzick, 15 Jul 2004:
104 Fix problem with writes with odd sizes in drivers/cfi_flash.c when
105 CFG_FLASH_USE_BUFFER_WRITE is set
106
wdenk20bddb32004-09-28 17:59:53 +0000107* Patch by Yuli Barcohen, 13 Jul 2004:
108 Allow clock setting on MPC866/MPC885 series chips according to
109 environment variable `cpuclk'
110
111* Patch by Yuli Barcohen, 20 Apr 2004:
112 Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
113
wdenkfa89d7c2004-09-28 16:44:41 +0000114* Patch by Vincent Dubey, 24 Sep 2004:
115 Add support for xaeniax board
116
wdenkdee058f2004-09-27 20:20:11 +0000117* Add comment about non-GPL character of standalone applications to
118 COPYING file
119
120* Fix FEC ethernet problem on NSCU board.
121
wdenkb2fc7e12004-09-21 23:33:32 +0000122* Patch by Gary Jennejohn, 09 Sep 2004:
123 allow to use USART1 as console port on at91rm9200dk boards
124
stroesea7a4df32004-09-16 12:37:13 +0000125* Patch by Stefan Roese, 16 Sep 2004:
126 Update AR405 board.
127
wdenk9e7130b2004-09-09 17:44:35 +0000128* Fix SysClk handling for PPChameleon and CATcenter boards
129
wdenka0ebde52004-09-08 22:03:11 +0000130* Patch by Detlev Zundel, 08 Sep 2004:
131 Update etags build target
132
133* Improve NetConsole support: add support for broadcast destination
134 address and buffered input.
135
136* Cleanup compiler warnings for GCC 3.3.x and later
137
138* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
139
wdenk0bbcbd22004-08-28 22:45:57 +0000140* Add support for IDS "NC650" board
141
wdenk79cf7572004-08-28 21:09:14 +0000142* Add automatic update support for LWMON board
143
144* Clear Block Lock-Bits when erasing flash on LWMON board.
145
146* Fix return code of "fatload" command
147
148* Enable MSDOS/VFAT filesystem support for LWMON board
149
wdenkda54bc92004-08-04 21:56:49 +0000150* Patch by Martin Krause, 03 Aug 2004:
151 change timing for SM501 graphics controller on TQM5200 module
152
153* Patch by Mark Jonas, 13 July 2004:
154 - Total5200 LCD now run in little endian mode. Endianess conversion
155 is done in hardware.
wdenk0bbcbd22004-08-28 22:45:57 +0000156 - Removed last reference to "console" environment variable.
wdenkda54bc92004-08-04 21:56:49 +0000157
wdenk6e44b0f2004-08-02 23:39:03 +0000158* Patches by Lars Munch, 12 Jul 2004:
159 - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
160 board specific
161 - split out the LXT971A PHY from ns_9750_eth.h
162 - split the dm9161 phy part out of at91rm9200_ether.c
163
wdenkda04a8b2004-08-02 23:22:59 +0000164* Patch by Andreas Engel, 12 Jul 2004:
165 Replaced hardcoded PL011 clock frequency with config variable.
166 Fixed wrong CONFIG_CMD_DFL doc.
167
168* Patch by Thomas Viehweger, 09 Jun 2004:
169 make it possible to remove chpart when there is only one partition
170
wdenkb8fb6192004-08-02 21:11:11 +0000171* Add support for console over UDP (compatible to Ingo Molnar's
172 netconsole patch under Linux)
173
wdenk492b9e72004-08-01 23:02:45 +0000174* Patch by Jon Loeliger, 16 Jul 2004:
175 - support larger DDR memories up to 2G on the PC8540/8560ADS and
176 STXGP3 boards
177 - Made MPC8540/8560ADS be 33Mhz PCI by default.
178 - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
179 and CONFIG_L2_INIT_RAM options.
180 - Refactor Local Bus initialization out of SDRAM setup.
181 - Re-implement new version of LBC11/DDR11 errata workarounds.
182 - Moved board specific PCI init parts out of CPU directory.
183 - Added TLB entry for PCI-1 IO Memory
184 - Updated README.mpc85xxads
185
wdenk7ac16102004-08-01 22:48:16 +0000186* Patch by Sascha Hauer, 28 Jun:
187 - add generic support for Motorola i.MX architecture
188 - add support for mx1ads, mx1fs2 and scb9328 boards
189
190* Patches by Marc Leeman, 23 Jul 2004:
191 - Add define for the PCI/Memory Buffer Configuration Register
192 - corrected comments in cpu/mpc824x/cpu_init.c
193
194* Add support for multiple serial interfaces
195 (for example to allow modem dial-in / dial-out)
196
stroese5a668712004-07-15 14:41:43 +0000197* Patch by Stefan Roese, 15 Jul 2004:
198 cpu/ppc4xx/sdram.c rewritten now using get_ram_size()
199
wdenk3cc599e2004-08-01 13:09:47 +0000200* Fix NSCU config; add ethernet wakeup code.
201
wdenk7ac16102004-08-01 22:48:16 +0000202* Add link for preloader for Motorola Coldfire to README.m68k
wdenk3cc599e2004-08-01 13:09:47 +0000203
wdenkbac38cb2004-07-12 22:34:51 +0000204* Patch by Michael Bendzick, 12 Jul 2004:
205 fix output formatting in drivers/cfi_flash.c
206
wdenk973f6332004-07-12 14:37:59 +0000207* Patch by Mark Jonas, 02 Jul 2004:
208 Fix lowboot (again) on MPC5xxx
209
wdenkfa366cc2004-07-11 22:27:55 +0000210* Patch by Curt Brune, 07 Jul 2004:
211 relocate exception vectors on arm720t if needed
212
wdenk82db02f2004-07-11 22:19:26 +0000213* Patch by George G. Davis, 06 Jul 2004:
214 - update mach-types.h to latest arm.linux.org.uk master list
215 - Set correct OMAP1610 bi_arch_number for build target
216
217* Patch by Curt Brune, 06 Jul 2004:
218 evb4510: add support for timer interrupt; cleanup
219
wdenka8c13d42004-07-11 21:49:42 +0000220* Patch by Dan Poirot, 06 Jul 2004:
221 Fix sbc8260 environment variables
222
223* Cleanup redundand "console" environment variable
224
wdenk7dd13292004-07-11 20:04:51 +0000225* Patch by Mark Jonas, 05 Jul 2004:
226 add support for the Total5100's and Total5200's LCD screen
227
228* Patches by Dan Eisenhut, 01 Jul 2004:
229 - README fixes.
230 - Move doc2000.h include to prevent compiler warning on some boards
231
wdenkcc3f8a92004-07-11 19:17:20 +0000232* Patch by Mark Jonas, 01 Jul 2004:
233 Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
234 MGT5100 and MPC5200 based Freescale platforms.
235
wdenk361f4a22004-07-11 18:10:30 +0000236* Patch by Philippe Robin, 01 Jul 2004:
237 Add initialization for Integrator and versatile board files.
238
239* Patch by Hinko Kocevar, 01 Jun 2004:
240 Fix VFD FB allocation, add LCD FB allocation on ARM
241
wdenk64519362004-07-11 17:40:54 +0000242* Patch by Martin Krause, 30 Jun 2004:
243 Add support for TQM5200 board
244
245* Patch by Martin Krause, 29 Jun 2004:
246 Add loopw command: infinite write loop on address range
247
wdenk20a61222004-07-10 23:48:41 +0000248* Patches by Yasushi Shoji, 29 Jun 2004:
249 - add empty include/asm-microblaze/processor.h
250 - add to CREDITS and MAINTAINERS
251 - add gd initialization
252 - add MicroBlaze and SUZAKU board to MAKEALL script
253 - add reset support for SUZAKU
254 - add flush_cache() for MicroBlaze
255 - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
256 size flash memory on SUZAKU
257
wdenkb5bb1392004-07-10 23:11:10 +0000258* Patch by Prakash Kumar, 27 Jun 2004:
259 Add support for the PXA250 based Intrinsyc Cerf board.
260
261* Patch by Yasushi Shoji, 27 Jun 2004:
262 fix comment in include/common.h
263
wdenk265d2172004-07-10 22:35:59 +0000264* Rename SBC8560 into sbc8560 for consistency
265
266* Patch by Daniel Poirot, 24 Jun 2004:
267 Add support for Wind River's sbc8240 board
268
269* Patches by Yasushi Shoji, 26 Jun 2004:
270 - drivers/serial_xuartlite.c: fix "return 0" in void function
271 - add microblaze support to mkimage tool
272
wdenk3203c8f2004-07-10 21:45:47 +0000273* Patch by Fred Klatt, 25 Jun 2004:
wdenk265d2172004-07-10 22:35:59 +0000274 Add support for WindRiver's sbc8560 board
wdenk3203c8f2004-07-10 21:45:47 +0000275
276* Patch by Nicolas Lacressonniere, 24 Jun 2004
277 Small Bugs fixes for "at91rm9200dk" board:
278 - Timing modifications for SPI DataFlash access
279 - Fix NAND flash detection bug
280
281* Patch by Nicolas Lacressonniere, 24 Jun 2004:
282 Add Support for Flash AT49BV6416 for AT91RM9200DK board
283
wdenk13eb2212004-07-09 23:27:13 +0000284* Patch by Jon Loeliger, 17 June 2004:
285 Completion of the 8540ADS/8560ADS updates:
286 Fix some PCI and Rapid I/O memory maps,
287 Initialize both TSEC 1 and 2,
288 Initialize SDRAM
289 Update MAINTAINER for 85xx boards and README.mpc85xxads
290
wdenkec5dc0d2004-07-09 22:51:01 +0000291* Patch by Yuli Barcohen, 16 Jun 2004:
292 Remove obsolete AdderII port which was superseded by unified
293 AdderII/Adder87x port
294
295* Patch by Ladislav Michl, 16 Jun 2004:
296 Fix gcc-3.3.3 warnings for smc91111.c
297
stroeseaa192712004-07-02 14:38:26 +0000298* Patch by Stefan Roese, 02 Jul 2004:
299 - Fix bug in 405 ethernet driver; allocated data not cleared!
300 - Fix problem in 405 i2c driver; don't try to print without console!
301
wdenk3ea95e42004-07-01 22:02:29 +0000302* Patch by Paul Ruhland, 11 Jun 2004:
303 Remove debug code from 'board/lpd7a40x/flash.c'
304
wdenk99874b42004-07-01 21:40:08 +0000305* Patch by Andrea Marson, 11 Jun 2004:
306 Update for PPChameleon board:
307 - support for SysClk @ 25MHz
308 - support for Silicon Motion SM712 VGA controller
309 - some clean ups
310
wdenk3337af42004-07-01 20:28:03 +0000311* Patches by Richard Woodruff, 10 Jun 2004:
312 - fix problems with examples/stubs.c for GCC >= 3.4
313 - fix problems with gd initialization
314
wdenkf2140d52004-07-01 16:30:44 +0000315* Patch by Curt Brune, 17 May 2004:
316 - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
317 - Add support for ESPD-Inc. EVB4510 Board
318
319* Patch by Marc Leeman, 11 May 2004:
320 Fix for MPC8245 - reading PPC Memory from another device with the
321 PPC as PCI target device corrupts data due to interenal hardware
322 buffering.
323
wdenk01686632004-06-30 22:59:18 +0000324* Fix "cls" command when used with splash screen
325
326* Increase NFS download timeout (now 1 min - 10 sec is to short for a
327 slow download of a big image)
328
wdenk0811ded2004-06-25 23:35:58 +0000329* Add "cls" function to MPC823 LCD driver so we can reinitialize the
330 display even after showing a bitmap
331
wdenk9e930b62004-06-19 21:19:10 +0000332* Patch by Josef Wagner, 04 Jun 2004:
333 - DDR Ram support for PM520 (MPC5200)
334 - support for different flash types (PM520)
335 - USB / IDE / CF-Card / DiskOnChip support for PM520
336 - 8 bit boot rom support for PM520/CE520
337 - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
338 - I2C and RTC support for CPC45
339 - support of new flash type (28F160C3T) for CPC45
340
wdenk9e076902004-06-17 18:50:45 +0000341* Fix flash parameters passed to Linux for PPChameleon board
342
343* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
344
wdenk37bdfdf2004-06-10 21:55:33 +0000345* Patch by Paul Ruhland, 10 Jun 2004:
wdenk9e930b62004-06-19 21:19:10 +0000346 fix support for Logic SDK-LH7A404 board and clean up the
wdenk37bdfdf2004-06-10 21:55:33 +0000347 LH7A404 register macros.
348
349* Patch by Matthew McClintock, 10 Jun 2004:
350 Modify code to select correct serial clock on Sandpoint8245
351
wdenkefc6f362004-06-10 21:34:36 +0000352* Patch by Robert Schwebel, 10 Jun 2004:
353 Add support for Intel K3 strata flash.
354
355* Patch by Thomas Brand, 10 Jun 2004:
356 Fix "loads" command on DK1S10 board
357
wdenk9f664dd2004-06-09 21:50:45 +0000358* Patch by Yuli Barcohen, 09 Jun 2004:
wdenk5b1e6142004-06-09 21:54:22 +0000359 Add support for 8MB flash SIMM and JFFS2 file system on
360 Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).
361
362* Patch by Yuli Barcohen, 09 Jun 2004:
wdenk9f664dd2004-06-09 21:50:45 +0000363 Add support for Analogue&Micro Adder87x and the older AdderII board.
364
365* Patch by Ming-Len Wu, 09 Jun 2004:
366 Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
367
wdenkec432742004-06-09 21:04:48 +0000368* Patch by Sam Song, 09 Jun 2004:
369 - Add support for RPXlite_DW board
370 - Update FLASH driver for 4*AM29DL323DB90VI
371 - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
372
wdenk2d644822004-06-09 17:45:32 +0000373* Patch by Mark Jonas, 08 June 2004:
374 - Make MPC5200 boards evaluate the SVR to print processor name and
375 version in checkcpu() (cpu/mpc5xxx/cpu.c).
376
377* Patch by Kai-Uwe Bloem, 06 May 2004:
378 Fix endianess problem in cramfs code
379
wdenkaeba06f2004-06-09 17:34:58 +0000380* Patch by Tom Armistead, 04 Jun 2004:
381 Add support for MAX6900 RTC
382
383* Patches by Ladislav Michl, 03 Jun 2004:
384 - fix cfi_flash.c on LE systems
385 - let 'make mrproper' delete u-boot.img as well
386 - turn printf into debug in cfi_flash.c
387
wdenk51108172004-06-09 15:37:23 +0000388* Patch by Kurt Stremerch, 28 May 2004:
389 Add support for Exys XSEngine board
390
wdenk604b7a12004-06-09 15:29:49 +0000391* Patch by Martin Krause, 27 May 2004:
392 Fix a MPC5xxx I2C timing issue in i2c_probe().
393
394* Patch by Leif Lindholm, 27 May 2004:
395 Fix board_init_f() for dbau1x00 board.
396
wdenk920e91b2004-06-09 15:25:53 +0000397* Patch by Imre Deak, 26 May 2004:
398 On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
399 Set flash base accordingly, and decide whether to do or skip board
400 specific setup steps.
401
402* Patch by Josef Baumgartner, 26 May 2004:
403 Add missing define in include/asm-m68k/global_data.h
404
wdenkd11115a2004-06-09 15:24:18 +0000405* Patch by Josef Baumgartner, 25 May 2004:
406 Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c
407
408* Patch by Paul Ruhland, 24 May 2004:
409 fix SDRAM initialization for LPD7A400 board.
410
wdenk79b59372004-06-09 14:58:14 +0000411* Patch by Jian Zhang, 20 May 2004:
412 add support for environment in NAND flash
413
wdenk76dd6c72004-06-09 14:47:54 +0000414* Patch by Yuli Barcohen, 20 May 2004:
415 Add support for Interphase iSPAN boards.
416
417* Patches by Paul Ruhland, 17 May 2004:
418 - Add I/O functions to the smc91111 ethernet driver to support the
419 Logic LPD7A40x boards.
wdenk3c711762004-06-09 13:37:52 +0000420 - Add support for the Logic Zoom LH7A40x based SDK board(s),
421 specifically the LPD7A400.
422
423* Patches by Robert Schwebel, 15 May 2004:
424 - call MAC address reading code also for SMSC91C111;
425 - make SMSC91C111 timeout configurable, remove duplicate code
426 - fix get_timer() for PXA
427 - update doc/README.JFFS2
428 - use "bootfile" env variable also for jffs2
429
wdenk7e920de2004-06-09 12:47:02 +0000430* Patch by Tolunay Orkun, 14 May 2004:
431 Add support for Cogent CSB472 board (8MB Flash Rev)
432
wdenk6568eaa2004-06-09 12:42:26 +0000433* Patch by Thomas Viehweger, 14 May 2004:
434 - flash.h: more flash types added
435 - immap_8260.h: some bits added (useful for RMII)
436 - cmd_coninfo.c: typo corrected, printf -> puts
437 - reduced size by replacing spaces with tab
438
wdenk0359dde2004-06-09 10:15:00 +0000439* Patch by Robert Schwebel, 13 May 2004:
440 Add 'imgextract' command: extract one part of a multi file image.
441
wdenkcc245992004-06-09 00:51:50 +0000442* Patches by Jon Loeliger, 11 May 2004:
wdenka445ddf2004-06-09 00:34:46 +0000443 Dynamically handle REV1 and REV2 MPC85xx parts.
444 (Jon Loeliger, 10-May-2004).
445 New consistent memory map and Local Access Window across MPC85xx line.
446 New CCSRBAR at 0xE000_0000 now.
447 Add RAPID I/O memory map.
448 New memory map in README.MPC85xxads
449 (Kumar Gala, 10-May-2004)
450 Better board and CPU identification on MPC85xx boards at boot.
451 (Jon Loeliger, 10-May-2004)
452 SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
453 Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
454 (Jim Robertson, 10-May-2004)
455 Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
456 Supports multiple PHYs.
457 (Andy Fleming, 10-May-2004)
458 Some README.MPC85xxads updates.
459 (Kumar Gala, 10-May-2004)
460 Copyright updates for "Freescale"
461 (Andy Fleming, 10-May-2004)
462
wdenk96fe0d32004-06-09 00:15:33 +0000463* Patch by Stephen Williams, 11 May 2004:
464 Add flash support for ST M29W040B
465 Reduce JSE specific flash.c to remove dead code.
466
wdenk7f1447f2004-06-09 00:10:59 +0000467* Patch by Markus Pietrek, 04 May 2004:
468 Fix clear_bss code for ARM systems (all except s3c44b0 which
469 doesn't clear BSS at all?)
470
471* Fix "ping" problem on INC-IP board. Strange problem:
472 Sometimes the store word instruction hangs while writing to one of
473 the Switch registers, but only if the next instruction is 16-byte
474 aligned. Moving the instruction into a separate function somehow
475 makes the problem go away.
476
wdenk914be132004-06-08 00:22:43 +0000477* Patch by Rishi Bhattacharya, 08 May 2004:
478 Add support for TI OMAP5912 OSK Board
479
480* Patch by Sam Song May, 07 May 2004:
481 Fix typo of UPM table for rmu board
482
483* Patch by Pantelis Antoniou, 05 May 2004:
wdenkc4e854f2004-06-07 23:46:25 +0000484 - Intracom board update.
485 - Add Codec POST.
486
wdenk2a6109c2004-06-06 23:53:59 +0000487* Add support for the second Ethernet interface for the 'PPChameleon'
488 board.
489
wdenke3a06802004-06-06 23:13:55 +0000490* Patch by Dave Peverley, 30 Apr 2004:
491 Add support for OMAP730 Perseus2 Development board
492
493* Patch by Alan J. Luse, 29 Apr 2004:
494 Fix flash chip-select (OR0) option register setting on FADS boards.
495
496* Patch by Alan J. Luse, 29 Apr 2004:
497 Report MII network speed and duplex setting properly when
498 auto-negotiate is not enabled.
499
500* Patch by Jarrett Redd, 29 Apr 2004:
501 Fix hang on reset on Ocotea board due to flash in wrong mode.
502
wdenk6b1aa8d2004-06-06 22:11:41 +0000503* Patch by Dave Peverley, 29 Apr 2004:
504 add MAC address detection to smc91111 driver
505
506* Patch by David Müller, 28 Apr 2004:
507 fix typo in lib_arm/board.c
508
wdenk0e2bd9c2004-06-06 21:51:03 +0000509* Patch by Tolunay Orkun, 20 Apr 2004:
510 - README update: add CONFIG_CSB272 and csb272_config
511 - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
512 i2cfast environment variable
513
wdenka7556b22004-06-06 21:35:06 +0000514* Patch by Yuli Barcohen, 19 Apr 2004:
515 - Rename DUET_ADS to MPC885ADS
516 - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
517 - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
518 - Clean up FADS family port to use the new defines
519
wdenkf8c590b2004-06-01 21:08:17 +0000520* Fix PCI support on CPC45 board
521
wdenke4adb352004-05-19 21:33:14 +0000522* Patch by Scott McNutt, 25 Apr 2004:
523 Add Nios GDB/JTAG Console support:
524 - Add stubs to support gdb via JTAG.
525 - Add support for console over JTAG.
526 - Minor cleanup.
527
wdenkbb33bab2004-05-13 13:23:58 +0000528* Add support for CATcenter board (based on PPChameleon ME module)
529
wdenke07ec1b2004-05-12 22:54:36 +0000530* Patch by Klaus Heydeck, 12 May 2004:
531 Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
532 load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
533 various changes to KUP4 board specific files
534
wdenkaf143832004-05-12 22:18:31 +0000535* Fix minor network problem on MPC5200: need some delay between
536 resetting the PHY and sending the first packet. Implemented in a
537 "natural" way by invoking the PHY reset and initialization code
538 only once after power on vs. each time the interface is brought up.
539
wdenkbd8cf2f2004-05-11 21:53:55 +0000540* Add some limited support for low-speed devices to SL811 USB controller
541 (at least "usb reset" now passes successfully and "usb info" displays
542 correct information)
543
wdenk63a10be2004-05-08 20:33:20 +0000544* Change init sequence for multiple network interfaces: initialize
545 on-chip interfaces before external cards.
546
wdenkf248ebc2004-05-05 19:44:41 +0000547* Fix memory leak in the NAND-specific JFFS2 code
548
549* Fix SL811 USB controller when attached to a USB hub
550
wdenk50fc90c2004-05-05 08:31:53 +0000551* Fix config option spelling in PM520 config file
552
553* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
554 patches by Pantelis Antoniou, 30 Mar 2004)
555
wdenk6c59edc2004-05-03 20:45:30 +0000556* Fix minor NAND JFFS2 related issue
557
558* Fixes for SL811 USB controller:
559 - implement workaround for broken memory stick
560 - improve error handling
561
562* Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better
563 cope with congested networks.
564
565======================================================================
wdenk33591052004-04-12 14:31:43 +0000566Changes for U-Boot 1.1.1:
567======================================================================
wdenk12490652004-04-18 21:13:41 +0000568
wdenk7ad5e4c2004-04-25 15:41:35 +0000569* Patch by Travis Sawyer, 23 Apr 2004:
570 Fix VSC/CIS 8201 phy descrambler interoperability timing due to
571 errata from Vitesse Semiconductor.
wdenk7b370962004-04-25 14:37:29 +0000572
573* Patch by Philippe Robin, 22 Apr 2004:
wdenke07ec1b2004-05-12 22:54:36 +0000574 Fix ethernet configuration for "versatile" board
wdenk7b370962004-04-25 14:37:29 +0000575
576* Patch by Kshitij Gupta, 21 Apr 2004:
577 Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards
578
579* Patch by Steven Scholz, 24 Feb 2004:
580 Fix a bug in AT91RM9200 ethernet driver:
581 The MII interface is now initialized before accessing the PHY.
582
wdenk656140b2004-04-25 13:18:40 +0000583* Patch by John Kerl, 19 Apr 2004:
584 Use U-boot's miiphy.h for PHY register names, rather than
585 introducing a new header file.
586
587* Update pci_ids.h from linux-2.4.26
588
589* Patch by Masami Komiya, 19 Apr 2004:
590 Fix problem cause by VLAN function on little endian architecture
591 without VLAN environment
592
wdenkc78bf132004-04-24 23:23:30 +0000593* Clean up the TQM8xx_YYMHz configurations; allow to use the same
wdenk656140b2004-04-25 13:18:40 +0000594 binary image for all clock frequencies. Implement run-time
wdenkc78bf132004-04-24 23:23:30 +0000595 optimization of flash access timing based on the actual bus
596 frequency.
597
wdenk20c98a62004-04-23 20:32:05 +0000598* Modify KUP4X board configuration to use SL811 driver for USB memory
599 sticks (including FAT / VFAT filesystem support)
600
601* Add SL811 Host Controller Interface driver for USB
602
603* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
604
605* Patch by Pantelis Antoniou, 19 Apr 2004:
606 Allow to use shell style syntax (i. e. ${var} ) with standard parser.
607 Minor patches for Intracom boards.
608
609* Patch by Christian Pell, 19 Apr 2004:
610 cleanup support for CF/IDE on PCMCIA for PXA25X
611
wdenke44b9112004-04-18 23:32:11 +0000612* Temporarily disabled John Kerl's extended MII command code because
613 "miivals.h" is missing
614
615* Patches by Mark Jonas, 13 Apr 2004:
616 - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
617 - Add sync instructions to IceCube SDRAM init code
618 - Move SDRAM chip constants into seperate include files
619 - Unify DDR and SDR initialization code
620 - Unify all IceCube (Lite5xxx) target names
621
wdenk61066ec2004-04-18 22:57:51 +0000622* Patch by John Kerl, 16 Apr 2004:
623 Enable ranges in mii command, e.g. mii read 0-1f 0 or
624 mii read 4-7 18-1a. Also add mii dump subcommand for
625 pretty-printing standard regs 0-5.
626
627* Patch by Stephen Williams, 16 April 2004:
628 fix typo in JSE.h; update MAINTAINERS
629
wdenk19c8fb72004-04-18 22:26:17 +0000630* Patch by Matthew S. McClintock, 14 Apr 2004:
631 fix initdram function for utx8245 board
632
633* Patch by Markus Pietrek, 14 Apr 2004:
634 use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag
635
636* Patch by Reinhard Meyer, 18 Apr 2004:
637 provide the IDE Reset Function for EMK 5200 boards
638
639* Patch by Masami Komiya, 12 Apr 2004:
640 fix pci_hose_write_config_{byte,word}_via_dword problems
641
wdenka6270482004-04-18 22:03:42 +0000642* Patch by Sangmoon Kim, 12 Apr 2004:
643 Update max RAM size for debris board
644
645* Patch by Travis Sawyer, 08 Apr 2004:
646 Add TLB entry for second DIMM slot on ocotea
647
648* Patch by Masami Komiya, 08 Apr 2004:
649 add RTL8169 network driver
650
wdenk78924a72004-04-18 21:45:42 +0000651* Patch by Dan Malek, 07 Apr 2004:
652 - Add support for RPC/STx GP3, Motorola 8560 board
653 - Update 85xx TSEC driver so it searches MII for first available PHY
654 and uses that one.
655 - Add functions to support console MII commands.
656
657* Patch by Tolunay Orkun, 07 Apr 2004:
wdenka6270482004-04-18 22:03:42 +0000658 Move initialization of bi_iic_fast[]
wdenk78924a72004-04-18 21:45:42 +0000659 from board_init_f() to board_init_r()
660
661* Patch by Yasushi Shoji, 07 Apr 2004:
662 Cleanup microblaze port
663
664* Patch by Sangmoon Kim, 07 Apr 2004:
665 Add auto SDRAM module detection for Debris board
666
wdenk792c44a2004-04-18 21:17:30 +0000667* Patch by Rune Torgersen, 06 Apr 2004:
668 - Fix some PCI problems on the MPC8266ADS board
669 - Fix the location of some PCI entries in the immap structure
670
wdenk12490652004-04-18 21:13:41 +0000671* Patch by Yasushi Shoji, 07 Apr 2004:
672 - add support for microblaze processors
673 - add support for AtmarkTechno "suzaku" board
674
wdenk8886a662004-04-18 19:43:36 +0000675* Configure PPChameleon board to use redundand environment in flash
676
677* Configure PPChameleon board to use JFFS2 NAND support.
678
679* Added support for JFFS2 filesystem (read-only) on top of NAND flash
680
wdenk05939202004-04-18 17:39:38 +0000681* Patch by Rune Torgersen, 16 Apr 2004:
682 LBA48 fixes
wdenk33591052004-04-12 14:31:43 +0000683
wdenk6203e402004-04-18 10:13:26 +0000684* Patches by Pantelis Antoniou, 16 Apr 2004:
685 - add support for a new version of an Intracom board and fix
686 various other things on others.
687 - add verify support to the crc32 command (define
688 CONFIG_CRC32_VERIFY to enable it)
689 - fix FEC driver for MPC8xx systems:
690 1. fix compilation problems for boards that use dynamic
691 allocation of DPRAM
692 2. shut down FEC after network transfers
693 - HUSH parser fixes:
694 1. A new test command was added. This is a simplified version of
695 the one in the bourne shell.
696 2. A new exit command was added which terminates the current
697 executing script.
698 3. Fixed handing of $? (exit code of last executed command)
wdenk05939202004-04-18 17:39:38 +0000699 - Fix some compile problems;
700 add "once" functionality for the netretry variable
wdenk6203e402004-04-18 10:13:26 +0000701
wdenke5cda752004-04-15 23:23:39 +0000702* Patch by George G. Davis, 02 Apr 2004:
703 add support for Intel Assabet board
704
wdenk634d2f72004-04-15 23:14:49 +0000705* Patch by Stephen Williams, 01 Apr 2004:
706 Add support for Picture Elements JSE board
707
708* Patch by Christian Pell, 01 Apr 2004:
709 Add CompactFlash support for PXA systems.
710
wdenk3902d702004-04-15 18:22:41 +0000711* Patches by Pantelis Antoniou, 30 Mar 2004:
712 - add auto-complete support to the U-Boot CLI
713 - add support for NETTA and NETPHONE boards; fix NETVIA board
wdenk61642172004-04-15 21:16:42 +0000714 - add support for the Epson 156x series of graphical displays
715 (These displays are serial and not suitable for using a normal
716 framebuffer console on them)
717 - add infrastructure needed in order to POST any DSPs in a board
wdenke7047de2004-04-15 21:31:56 +0000718 - improve and fix various things in the MPC8xx FEC driver:
719 1. The new 87x and 88x series of processors have two FECs,
720 and the new driver supports them both.
721 2. Another change in the 87x/88x series is support for
722 the RMII (Reduced MII) interface. However numerous
723 changes are needed to make it work since the PHYs
724 are connected to the same lines. That means that
725 you have to address them correctly over the MII
726 interface.
727 3. We now correctly match the MII/RMII interface
728 configuration to what the PHY reports.
wdenk145d2c12004-04-15 21:48:45 +0000729 - Fix problem when readingthe MII status register. Due to the
730 internal design of many PHYs you have to read the register
731 twice. The problem is more apparent in 10Mbit mode.
732 - add new mode ".jffs2s" for reading from a NAND device: it just
733 skips over bad blocks.
734 - add networking support for VLANs (802.1q), and CDP (Cisco
735 Discovery Protocol)
wdenk270a8bd2004-04-15 21:58:11 +0000736 - some minor patches / cleanup
wdenk3902d702004-04-15 18:22:41 +0000737
738* Patch by Yuli Barcohen, 28 Mar 2004:
739 - Add support for MPC8272 family including MPC8247/8248/8271/8272
740 - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
741 - Change configuration method for MPC8260ADS family
742
wdenk2fb73902004-04-12 16:12:49 +0000743* add startup code to clear the BSS of standalone applications
744
wdenk33591052004-04-12 14:31:43 +0000745* Fix if / elif handling bug in HUSH shell
746
747======================================================================
wdenka9f01392004-04-10 20:44:51 +0000748Changes for U-Boot 1.1.0:
wdenk87249ba2004-01-06 22:38:14 +0000749======================================================================
750
wdenka09491a2004-04-08 22:31:29 +0000751* Patch by Mark Jonas: Remove config.tmp files only when
752 unconfiguring the board
753
754* Adapt RMU board for bigger flash memory
755
wdenk65faef92004-03-25 19:29:38 +0000756* Patch by Klaus Heydeck, 13 Mar 2003:
757 Add support for KUP4X Board
758
wdenk4d01d9e2004-03-25 14:59:05 +0000759* Patch by Pavel Bartusek, 21 Mar 2004
760 Add Reiserfs support
761
762* Patch by Hinko Kocevar, 20 Mar 2004
763 - Add auto-release for SMSC LAN91c111 driver
764 - Add save/restore of PTR and PNR regs as suggested in datasheet
765
wdenkeec9a3d2004-03-23 23:20:24 +0000766* Patch by Stephen Williams, 19 March 2004
767 Increase speed of sector reads from SystemACE,
768 shorten poll timeout and remove a useless reset
769
770* Patch by Tolunay Orkun, 19 Mar 2004:
771 Make GigE PHY 1000Mbps Speed/Duplex detection conditional
772 (CONFIG_PHY_GIGE)
773
774* Patch by Brad Kemp, 18 Mar 2004:
775 prevent machine checks during a PCI scan
776
777* Patch by Pierre Aubert, 18 Mar 2004:
778 Fix string cleaning in IDE identification
779
wdenkaea86e42004-03-23 22:53:55 +0000780* Patch by Pierre Aubert, 18 Mar 2004:
781 - Unify video mode handling for Chips & Technologies 69000 Video
782 chip and Silicon Motion SMI 712/710/810 Video chip
783 - Add selection of the video output (CRT or LCD) via 'videoout'
784 environment variable for the Silicon Motion
785 - README update
786
787* Patch by Pierre Aubert, 18 Mar 2004:
788 include/common.h typo fix
789
790* Patches by Tolunay Orkun, 17 Mar 2004:
791 - Add support for bd->bi_iic_fast[] initialization via environment
792 variable "i2cfast" (CONFIG_I2CFAST)
793 - Add "i2cfast" u-boot environment variable support for csb272
794
wdenk8d4d1f62004-03-23 22:37:33 +0000795* Patch by Carl Riechers, 17 Mar 2004:
796 Ignore '\0' characters in console input for use with telnet and
797 telco pads.
798
799* Patch by Leon Kukovec, 17 Mar 2004:
800 typo fix for strswab prototype #ifdef
801
wdenk42c05472004-03-23 22:14:11 +0000802* Patches by Thomas Viehweger, 16 Mar 2004:
803 - show PCI clock frequency on MPC8260 systems
804 - add FCC_PSMR_RMII flag for HiP7 processors
805 - in do_jffs2_fsload(), take load address from load_addr if not set
806 explicit, update load_addr otherwise
807 - replaced printf by putc/puts when no formatting is needed
808 (smaller code size, faster execution)
809
wdenkf16b5162004-03-23 21:43:07 +0000810* Patch by Phillippe Robin, 16 Mar 2004:
811 avoid dereferencing NULL pointer in lib_arm/armlinux.c
812
813* Patch by Stephen Williams, 15 Mar 2004:
814 Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation
815
816* Patch by Tolunay Orkun, 15 Mar 2004:
817 Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()
818
819* Patch by Travis Sawyer, 15 Mar 2004:
820 Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port
821
wdenkc12081a2004-03-23 20:18:25 +0000822* Add start-up delay to make sure power has stabilized before
823 attempting to switch on USB on SX1 board.
824
825* Patch by Josef Wagner, 18 Mar 2004:
826 - Add support for MicroSys XM250 board (PXA255)
827 - Add support for MicroSys PM828 board (MPC8280)
828 - Add support for 32 MB Flash on PM825/826
829 - new SDRAM refresh rate for PM825/PM826
830 - added support for MicroSys PM520 (MPC5200)
831 - replaced Query by Identify command in CPU86/flash.c
832 to support 28F160F3B
833
834* Fix wrap around problem with udelay() on ARM920T
835
836* Add support for Macronix flash on TRAB board
837
wdenk18bd81e2004-03-17 01:13:07 +0000838* Patch by Pierre Aubert, 15 Mar 2004:
839 Fix buffer overflow in IDE identification
840
841* Fix power-off of LCD for out-of-band temperatures on LWMON board
842
843* Remove redundand #define in IceCube.h
844
wdenk0ef49462004-03-15 09:00:01 +0000845* Patch by Steven Scholz, 27 Feb 2004:
846 - Adding get_ticks() and get_tbclk() for AT91RM9200
847 - Many white space fixes in cpu/at91rm9200/interrupts.c
848
849* Patches by Steven Scholz, 20 Feb 2004:
850 some cleanup in AT91RM9200 related code
851
wdenked2ac4b2004-03-14 18:23:55 +0000852* Patches by Travis Sawyer, 12 Mar 2004:
853 - Fix Gigabit Ethernet support for 440GX
854 - Add Gigabit Ethernet Support to MII PHY utilities
855
856* Patch by Brad Kemp, 12 Mar 2004:
857 Fixes for drivers/cfi_flash.c:
858 - Better support for x8/x16 implementations
859 - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
860 - Added defines for AMD command and address constants
861
862* Patch by Leon Kukovec, 12 Mar 2004:
863 Fix get_dentfromdir() to correctly handle deleted dentries
wdenkc35ba4e2004-03-14 22:25:36 +0000864
wdenked2ac4b2004-03-14 18:23:55 +0000865* Patch by George G. Davis, 11 Mar 2004:
866 Remove hard coded network settings in TI OMAP1610 H2
867 default board config
868
869* Patch by George G. Davis, 11 Mar 2004:
870 add support for ADS GraphicsClient+ board.
871
wdenk18bd81e2004-03-17 01:13:07 +0000872* Patch by Pierre Aubert, 11 Mar 2004:
wdenke55402c2004-03-14 16:51:43 +0000873 - add bitmap command and splash screen support in cfb console
874 - add [optional] origin in the bitmap display command
875
876* Patch by Travis Sawyer, 11 Mar 2004:
877 Fix ocotea board early init interrupt setup.
878
879* Patch by Thomas Viehweger, 11 Mar 2004:
880 Remove redundand code; add PCI-specific bits to include/mpc8260.h
881
wdenke28cf632004-03-14 15:20:55 +0000882* Patch by Stephan Linz, 09 Mar 2004
883 - Add support for the SSV ADNP/ESC1 (Nios Softcore)
884
885* Patch by George G. Davis, 9 Mar 2004:
886 fix recent build failure for SA1100 target
887
888* Patch by Travis Sawyer, 09 Mar 2004:
889 Support native interrupt mode for the IBM440GX.
890 Previously it was running in 440GP compatibility mode.
891
wdenk4989f872004-03-14 15:06:13 +0000892* Patch by Philippe Robin, 09 Mar 2004:
893 Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
894 Platform support.
895
896* Patch by Masami Komiya, 08 Mar 2004:
897 Don't overwrite server IP address or boot file name
898 when the boot server does not return values
899
wdenk18bd81e2004-03-17 01:13:07 +0000900* Patch by Tolunay Orkun, 5 Mar 2004:
wdenk4989f872004-03-14 15:06:13 +0000901 Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
902
wdenk369d43d2004-03-14 14:09:05 +0000903* Patch by Tolunay Orkun, 5 Mar 2004:
904 Fix early board initialization for Cogent CSB272 board
905
906* Patch by Ed Okerson, 3 Mar 2004:
907 fix CFI flash writes for little endian systems
908
909* Patch by Reinhard Meyer, 01 Mar 2004:
910 generalize USB and IDE support for MPC5200 with according
911 changes to IceCube.h and TOP5200.h
912 add Am29LV256 256 MBit FLASH support for TOP5200 boards
913 add info about USB and IDE to README
914
wdenkacd9b102004-03-14 00:59:59 +0000915* Patch by Yuli Barcohen, 4 Mar 2004:
916 Fix problems with GCC 3.3.x which changed handling of global
917 variables explicitly initialized to zero (now in .bss instead of
918 .data as before).
919
920* Patch by Leon Kukovec, 02 Mar 2004:
921 add strswab() to fix IDE LBA capacity, firmware and model numbers
922 on little endian machines
923
924* Patch by Masami Komiya, 02 Mar 2004:
925 - Remove get_ticks() from NFS code
926 - Add verification of RPC transaction ID
927
928* Patch by Pierre Aubert, 02 Mar 2004:
929 cleanup for IDE and USB drivers for MPC5200
930
931* Patch by Travis Sawyer, 01 Mar 2004:
wdenk00fe1612004-03-14 00:07:33 +0000932 Ocotea:
933 - Add IBM PPC440GX Ref Platform support (Ocotea)
934 Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
935 Adapted to U-Boot and 440GX port
936 440gx_enet.c:
937 - Add gracious handling of all Ethernet Pin Selections for 440GX
938 - Add RGMII selection for Cicada CIS8201 Gigabit PHY
939 ppc440.h:
940 - Add needed bit definitions
941 - Fix formatting
942
943* Patch by Carl Riechers, 1 Mar 2004:
944 Add PPC440GX prbdv0 divider to fix memory clock calculation.
945
946* Patch by Stephan Linz, 27 Feb 2004
947 - avoid problems for targets without NFS download support
948
wdenkf602aa02004-03-13 23:29:43 +0000949* Patch by Rune Torgersen, 27 Feb 2004:
950 - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
951 - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
952 - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
953
954* Patch by Masami Komiya, 27 Feb 2004:
955 Fix rarpboot: add autoload by NFS
956
957* Patch by Dan Eisenhut, 26 Feb 2004:
958 fix flash_write return value in saveenv
959
960* Patch by Stephan Linz, 11 Dec 2003
961 expand config.mk to avoid trigraph warnings on NIOS
962
963* Rename "BMS2003" board into "HMI10"
964
wdenk05822bf2004-03-12 15:38:25 +0000965* SX1 patches: use "serial#" for USB serial #; use redundand environment
966 storage; auto-set console on USB port (using preboot command)
967
wdenk29e7f5a2004-03-12 00:14:09 +0000968* Add support for SX1 mobile phone; add support for USB-based console
969 (enable with "setenv stdout usbtty; setenv stdin usbtty")
970
wdenk0a12b752004-03-11 22:46:36 +0000971* Fix LOWBOOT configuration for MPC5200 with DDR memory
972
wdenk0e2874cb2004-03-02 14:05:39 +0000973* Fix SDRAM timings for LITE5200 / IceCube board
974
975* Handle Auti-MDIX / connection status for INCA-IP
976
977* Fix USB problems when attempting to read 0 bytes
978
wdenk372f0302004-02-27 08:21:54 +0000979* Patch by Travis Sawyer, 26 Feb 2004:
980 Fix broken compile for XPEDITE1K target.
981
982* Patch by Stephan Linz, 26 Feb 2004:
983 Bug fix for NFS code on NIOS targets
wdenk29e7f5a2004-03-12 00:14:09 +0000984
wdenk372f0302004-02-27 08:21:54 +0000985* Patch by Stephen Williams, 26 Feb 2004:
986 Break up SystemACE reads of large block counts
987
wdenk6ea1cf02004-02-27 08:20:54 +0000988* Patch by Pierre Aubert, 26 Feb 2004
989 add IDE support for MPC5200
990
991* Patch by Masami Komiya, 26 Feb 2004:
992 add autoload via NFS
993
994* Patch by Stephen Williams
995 Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
996 elsewhere in the source.
997
wdenkd729d302004-02-27 00:07:27 +0000998* Patch by Steven Scholz, 25 Feb 2004:
999 - Timeouts in FPGA code should be based on CFG_HZ
1000 - Minor cleanup in code for Altera FPGA ACEX1K
1001
1002* Patch by Steven Scholz, 25 Feb 2004:
1003 Changed "Directory Hierarchy" section in README
1004
1005* Patch by Masami Komiya, 25 Feb 2004:
1006 Reduce copy count in nfs_read_reply() of NFS code
1007
wdenk5f495752004-02-26 23:46:20 +00001008* Patch by Markus Pietrek, 24 Feb 2004:
1009 NS9750 DevBoard added
1010
wdenk6ea1cf02004-02-27 08:20:54 +00001011* Patch by Pierre Aubert, 24 Feb 2004
wdenk5f495752004-02-26 23:46:20 +00001012 add USB support for MPC5200
1013
1014* Patch by Steven Scholz, 24 Feb 2004:
1015 - fix MII commands to use values from last command
1016
1017* Patch by Torsten Demke, 24 Feb 2004:
1018 Add support for the eXalion platform (SPSW-8240, F-30, F-300)
1019
wdenkdb82c8e2004-02-26 23:01:04 +00001020* Patch by Rahul Shanbhag, 19 Feb 2004:
1021 Fixes for for OMAP1610 board:
1022 - shift some IRQ specific code to platform.S file
1023 - remove duplicatewatchdog reset code from start.S
1024
1025* Make Auto-MDIX Support configurable on INCA-IP board
1026
1027* Fix license for mkimage tool
1028
wdenk77ef4c62004-02-24 22:33:21 +00001029* Patch by Masami Komiya, 24 Feb 2004:
1030 Update NetBootFileXferSize in NFS code
1031
1032* Patch by Scott McNutt, 24 Feb 2004:
1033 fix packet length in NFS code
1034
wdenkbe9c1cb2004-02-24 02:00:03 +00001035* Patch by Masami Komiy, 22 Feb 2004:
1036 Add support for NFS for file download
1037
wdenkb98ac282004-02-24 00:16:43 +00001038* Patch by Andrea Scian, 17 Feb 2004:
1039 Add support for S3C44B0 processor and DAVE B2 board
1040
1041* Patch by Steven Scholz, 20 Feb 2004:
1042 - Add support for MII commands on AT91RM9200 boards
1043 - some cleanup in AT91RM9200 ethernet code
1044
wdenke537b3b2004-02-23 23:54:43 +00001045* Patch by Peter Ryser, 20 Feb 2004:
1046 Add support for the Xilinx ML300 platform
1047
1048* Patch by Stephan Linz, 17 Feb 2004:
1049 Fix watchdog support for NIOS
1050
1051* Patch by Josh Fryman, 16 Feb 2004:
1052 Fix byte-swapping for cfi_flash.c for different bus widths
1053
1054* Patch by Jon Diekema, 14 Jeb 2004:
1055 Remove duplicate "FPGA Support" notes from the README file
1056
wdenke97d3d92004-02-23 22:22:28 +00001057* Patches by Reinhard Meyer, 14 Feb 2004:
1058 - update board/emk tree; use common flash driver
1059 - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
1060 [adapted for other PPC CPUs -- wd]
1061 - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
1062
1063* Patch by Jon Diekema, 13 Feb 2004:
1064 Call show_boot_progress() whenever POST "FAILED" is printed.
1065
1066* Patch by Nishant Kamat, 13 Feb 2004:
1067 Add support for TI OMAP1610 H2 Board
1068 Fixes for cpu/arm926ejs/interrupt.c
1069 (based on Richard Woodruff's patch for arm925, 16 Oct 03)
1070 Fix for a timer bug in OMAP1610 Innovator
1071 Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
1072
1073* Patches by Stephan Linz, 12 Feb 2004:
1074 - add support for NIOS timer with variable period preload counter value
1075 - prepare POST framework support for NIOS targets
1076
1077* Patch by Denis Peter, 11 Feb 2004:
1078 add POST support for the MIP405 board
1079
wdenkf70cbb22004-02-23 20:48:38 +00001080* Patch by Laurent Mohin, 10 Feb 2004:
1081 Fix buffer overflow in common/usb.c
1082
1083* Patch by Tolunay Orkun, 10 Feb 2004:
1084 Add support for Cogent CSB272 board
1085
wdenk2ebee312004-02-23 19:30:57 +00001086* Patch by Thomas Elste, 10 Feb 2004:
1087 Add support for NET+50 CPU and ModNET50 board
1088
1089* Patch by Sam Song, 10 Feb 2004:
1090 Fix typos in cfi_flash.c
1091
1092* Patch by Leon Kukovec, 10 Feb 2004
1093 Fixed long dir entry slot id calculation in get_vfatname
1094
1095* Patch by Robin Gilks, 10 Feb 2004:
1096 add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
1097 !=, <>, <, >, <=, >=)
1098
wdenkef893942004-02-23 16:11:30 +00001099* Fix problem with side effects in macros in include/usb.h
1100
1101* Patch by David Benson, 13 Nov 2003:
1102 bug 841358 - fix TFTP download size limit
1103
1104* Fixing bug 850768:
1105 improper flush_cache() in load_serial()
1106
1107* Fixing bug 834943:
1108 MPC8540 - missing volatile declarations
1109
1110* Patch by Stephen Williams, 09 Feb 2004:
1111 Add support for Xilinx SystemACE chip:
1112 - New files common/cmd_ace.c and include/systemace.h
1113 - Hook systemace support into cmd_fat and the partition manager
1114
1115* Patch by Travis Sawyer, 09 Feb 2004:
1116 Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
1117
wdenk56ed43e2004-02-22 23:46:08 +00001118* Patch by Travis Sawyer, 09 Feb 2004:
1119 o 440GX:
1120 - Fix PCI Indirect access for type 1 config cycles with ppc440.
1121 - Add phymode for 440 enet
1122 - fix pci pre init
1123 o XPedite1K:
1124 - Change board_pre_init to board_early_init_f
1125 - Add user flash to bus controller setup
1126 - Fix pci pre init
1127 - Fix is_pci_host to check GPIO for monarch bit
1128 - Force xpedite1k to pci conventional mode (via #define option)
1129
1130* Patch by Brad Kemp, 4 Feb 2004:
1131 - handle the machine check that is generated during the PCI scans
1132 on 82xx processors.
1133 - define the registers used in the IMMR by the PCI subsystem.
1134
1135* Patch by Pierre Aubert, 03 Feb 2004:
1136 cpu/mpc5xxx/start.S: copy MBAR into SPR311
1137
1138* Patch by Jeff Angielski, 03 Feb 2004:
1139 Fix copy & paste error in cpu/mpc8260/pci.c
1140
1141* Patch by Reinhard Meyer, 24 Jan 2004:
1142 Fix typo in cpu/mpc5xxx/pci_mpc5200.c
1143
wdenk4dd56e52004-02-20 22:02:48 +00001144* Add Auto-MDIX support for INCA-IP
1145
wdenke65527f2004-02-12 00:47:09 +00001146* Some code cleanup
1147
1148* Patch by Josef Baumgartner, 10 Feb 2004:
1149 Fixes for Coldfire port
1150
1151* Patch by Brad Kemp, 11 Feb 2004:
1152 Fix CFI flash driver problems
1153
wdenk88d73b52004-02-11 21:35:18 +00001154* Make sure to use a bus clock divider of 2 only when running TQM8xxM
1155 modules at CPU clock frequencies above 66 MHz.
wdenke65527f2004-02-12 00:47:09 +00001156
wdenk88d73b52004-02-11 21:35:18 +00001157* Optimize flash programming speed for LWMON (by another 100% :-)
1158
wdenk6cfa84e2004-02-10 00:03:41 +00001159* Patch by Jian Zhang, 3 Feb 2004:
1160 - Changed the incorrect FAT12BUFSIZE
1161 - data_begin in fsdata can be negative. Changed it to be short.
1162
wdenkc0bc2e12004-02-09 23:12:24 +00001163* Patches by Stephan Linz, 30 Jan 2004:
1164 1: - board/altera/common/flash.c:flash_erase():
1165 o allow interrupts befor get_timer() call
1166 o check-up each erased sector and avoid unexpected timeouts
1167 - board/altera/dk1c20/dk1s10.c:board_early_init_f():
1168 o enclose sevenseg_set() in cpp condition
1169 - remove the ASMI configuration for DK1S10_standard_32 (never present)
1170 - fix some typed in mistakes in the NIOS documentation
1171 2: - split DK1C20 configuration into several header files:
1172 o two new files for each NIOS CPU description
1173 o U-Boot related part is remaining in DK1C20.h
1174 3: - split DK1S10 configuration into several header files:
1175 o two new files for each NIOS CPU description
1176 o U-Boot related part is remaining in DK1S10.h
1177 4: - Add support for the Microtronix Linux Development Kit
1178 NIOS CPU configuration at the Altera Nios Development Kit,
1179 Stratix Edition (DK-1S10)
1180 5: - Add documentation for the Altera Nios Development Kit,
1181 Stratix Edition (DK-1S10)
1182 6: - Add support for the Nios Serial Peripharel Interface (SPI)
1183 (master only)
1184 7: - Add support for the common U-Boot SPI framework at
1185 RTC driver DS1306
1186
wdenkca262162004-02-09 20:51:26 +00001187* Patch by Rahul Shanbhag, 28 Jan 2004:
1188 Fix flash protection/locking handling for OMAP1610 innovator board.
1189
1190* Patch by Rolf Peukert, 28 Jan 2004:
1191 fix flash write problems on CSB226 board (write with 32 bit bus width)
1192
1193* Patches by Mark Jonas, 16 Jan 2004:
1194 - fix rounding error when calculating baudrates for MPC5200 PSCs
1195 - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
1196 time which is not supported
1197
wdenk2cefd152004-02-08 22:55:38 +00001198* Patch by Yuli Barcohen, 26 Jan 2004:
1199 Allow bzip2 compression for small memory footprint boards
1200
1201* Patch by Brad Kemp, 21 Jan 2004:
1202 Add support for CFI flash driver for both the Intel and the AMD
1203 command sets.
1204
1205* Patch by Travis Sawyer, 20 Jan 2004:
1206 Fix pci bridge auto enumeration of sibling p2p bridges.
1207
1208* Patch by Tolunay Orkun, 12 Jan 2004:
1209 Add some delays as needed for Intel LXT971A PHY support
1210
1211* Patches by Stephan Linz, 09 Jan 2004:
1212 - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
1213 - make DK1C20 board configuration related to ASMI conform to
1214 documentation
1215
wdenk927034e2004-02-08 19:38:38 +00001216* Patch by Anders Larsen, 09 Jan 2004:
1217
1218 ARM memory layout fixes: the abort-stack is now set up in the
1219 correct RAM area, and the BSS is zeroed out as it should be.
1220
1221 Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
1222 of the linker scripts are replaced by '__bss_start' and '_end',
1223 resp., which is a further step to eliminate unnecessary differences
1224 between the implementation of the CPU architectures.
1225
wdenk5401de42004-02-07 01:27:10 +00001226* Patch by liang a lei, 9 Jan 2004:
1227 Fix Intel 28F128J3 ID in include/flash.h
1228
1229* Patch by Masami Komiya, 09 Jan 2004:
1230 add support for TB0229 board (NEC VR4131 MIPS processor)
1231
1232* Patch by Leon Kukovec, 12 Dec 2003:
1233 changed extern __inline__ into static __inline__ in
1234 include/linux/byteorder/swab.h
1235
wdenk544e9732004-02-06 23:19:44 +00001236* Patch by Travis Sawyer, 30 Dec 2003:
1237 Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
1238 select MDI port based on enabled EMAC device.
1239 Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
1240 base PrPMC board.
1241
wdenk4b6e9052004-02-06 21:48:22 +00001242* Patch by Wolter Kamphuis, 15 Dec 2003:
1243 made CONFIG_SILENT_CONSOLE usable on all architectures
1244
1245* Disable date command on TQM866M - there is no RTC on MPC866
1246
wdenkfde37042004-01-31 20:06:54 +00001247* Fix variable CPU clock for MPC859/866 systems for low CPU clocks
1248
wdenk433feff2004-01-29 09:22:58 +00001249* Implement adaptive SDRAM timing configuration based on actual CPU
1250 clock frequency for INCA-IP; fix problem with board hanging when
1251 switching from 150MHz to 100MHz
1252
1253* Add PCMCIA CS support for BMS2003 board
1254
wdenkb50cde52004-01-24 20:25:54 +00001255* Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
1256 see doc/README.MPC866 for details;
1257 implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
1258 calculate CPU clock frequency from PLL register values.
1259
1260* Add support for 128 MB RAM on TQM8xxL/M modules
1261
wdenk398eeff2004-01-21 20:46:28 +00001262* Fix PS/2 keyboard problem caused by statically initialized variable
1263 pointing to a location in flash
1264
1265* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
1266
wdenkda55c6e2004-01-20 23:12:12 +00001267* The PS/2 mux on the BMS2003 board needs 450 ms after power on
1268 before we can access it; add delay in case we are faster (with no
1269 CF card inserted)
1270
1271* Cleanup of some init functions
1272
1273* Make sure SCC Ethernet is always stopped by the time we boot Linux
1274 to avoid Linux crashes by early packets coming in.
1275
1276* Accelerate flash accesses on LWMON board by using buffered writes
1277
wdenk2b80ae52004-01-18 18:21:54 +00001278* Fix typo in Makefile;
1279 fix problem with PARTNUM detection
1280
wdenkb983fa22004-01-16 00:30:56 +00001281* Patch by Reinhard Meyer, 09 Jan 2004:
1282 - add RTC support for MPC5200 based boards (requires RTC_XTAL)
1283
1284* Add support for IDE LED on BMS2003 board
1285 (exclusive with status LED!)
1286
1287* Add support for PS/2 keyboard (used with PS/2 multiplexor on
1288 BMS2003 board)
1289
1290* Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
1291 Add common files for "emk" boards
1292
wdenk87249ba2004-01-06 22:38:14 +00001293* Add a common get_ram_size() function and modify the the
1294 board-specific files to invoke that common implementation.
1295
1296======================================================================
wdenk7c699672004-01-06 11:13:56 +00001297Changes for U-Boot 1.0.1:
wdenk4b16c2e2003-11-07 13:42:26 +00001298======================================================================
1299
wdenk7c699672004-01-06 11:13:56 +00001300* Set default clock for INCA-IP to 150 MHz
1301
wdenk2f99a692004-01-04 22:51:12 +00001302* Make BMS2003 use a separate config file to avoid #ifdef mess;
1303 add I2C support; add support for DS1337 RTC
1304
1305* Add CompactFlash support for BMS2003 board
1306
1307* Add support for status LED on BMS2003 board
1308
wdenkad276f22004-01-04 16:28:35 +00001309* Patch by Scott McNutt, 02 Jan 2004:
1310 Add support for the Nios Active Serial Memory Interface (ASMI)
1311 on Cyclone devices
1312
1313* Patch by Andrea Marson, 16 Dec 2003:
1314 Add support for the PPChameleon ME and HI modules
1315
1316* Patch by Yuli Barcohen, 22 Dec 2003:
1317 Add support for Motorola DUET ADS board (MPC87x/88x)
1318
wdenkae65f502004-01-03 21:24:46 +00001319* Patch by Robert Schwebel, 15 Dec 2003:
1320 add support for cramfs (uses JFFS2 command interface)
1321
wdenk3be717f2004-01-03 19:43:48 +00001322* Patches by Stephan Linz, 11 Dec 2003:
1323 - more documentation for NIOS port
1324 - new struct nios_pio_t, struct nios_spi_t
1325 - Reconfiguration for NIOS Development Kit DK1C20:
1326 o move board related code from board/dk1c20
1327 to board/altera/dk1c20
1328 o create a new common source path board/altera/common
1329 and move generic flash access stuff into it
1330 o change/expand configuration file DK1C20.h
1331 - Add support for NIOS Development Kit DK1S10
1332 - Add status LED support for NIOS systems
1333 - Add dual 7-segment LED support for Altera NIOS DevKits
1334
wdenk5da7f2f2004-01-03 00:43:19 +00001335* Patch by Ronen Shitrit, 10 Dec 2003:
1336 Add support for the Marvell DB64360 / DB64460 development boards
1337
1338* Patch by Detlev Zundel, 10 Dec 2003:
1339 fix dependency problem in examples/Makefile
1340
wdenkbc01dd52004-01-02 16:05:07 +00001341* Patch by Denis Peter, 8 Dec 2003
1342 - add support for the PATI board (MPC555)
1343 - add SPI support for the MPC5xx
1344
1345* Patch by Anders Larsen, 08 Dec 2003:
1346 add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
1347 to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
1348 cleanup some redundand #defines
1349
wdenk0260cd62004-01-02 15:01:32 +00001350* Patch by André Schwarz, 8 Dec 2003:
1351 fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
1352 - TX and RX deskriptors must be quad-word aligned
1353 - does not work with only one TX deskriptor
1354 - standard reset method does not work
1355
1356* Patch by Masami Komiya, 08 Dec 2003:
1357 add RTL8139 ethernet driver
1358
1359* Patches by Ed Okerson, 07 Dec 2003:
1360 - fix ethernet for the AU1x00 processors in little-endian mode.
1361 - extend memsetup.S for the AU1x00 processors in BE and LE modes
1362
wdenk1ebf41e2004-01-02 14:00:00 +00001363* Minor code cleanup (coding style)
1364
1365* Patch by Reinhard Meyer, 30 Dec 2003:
1366 - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
1367 - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
1368 - turned debug print of PHY registers into a function (called in two places)
1369 - added support for EMK MPC5200 based modules
1370
1371* Fix MPC8xx PLPRCR_MFD_SHIFT typo
1372
1373* Add support for TQM866M modules
1374
1375* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
1376
1377* Fix a few compiler warnings
1378
wdenk78e3ab32003-12-28 11:44:59 +00001379* Patch by Reinhard Meyer, 28 Dec 2003:
1380 Add initial support for TOP5200 board
1381
wdenk67f13362003-12-27 19:24:54 +00001382* Make CPU clock on ICA-IP board controllable by a "cpuclk"
1383 environment variable which can set to "100", "133", or "150". The
1384 CPU clock will be configured accordingly upon next reboot. Other
1385 values are ignored. In case of an invalid or undefined "cpuclk"
1386 value, the compile-time default CPU clock speed will be used.
1387
1388* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
1389 window that is used to access the UART registers by the Linux driver)
1390
1391* Patch by Reinhard Meyer, 20 Dec 2003:
1392 Fix clock calculation for the MPC5200 for higher clock frequencies
1393 (above 2**32 / 10 = 429.5 MHz).
1394
1395* Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
1396
wdenk236d3fc2003-12-20 22:45:10 +00001397* Fix IceCube CLKIN configuration (it's 33.000000MHz)
1398
1399* Add new configuration for IceCube board with DDR memory
1400
1401* Update TRAB memory configurations
1402
wdenkdf28aa02003-12-12 00:02:26 +00001403* Add JFFS2 support for INCA-IP board
1404
stroese9c470352003-12-09 15:04:55 +00001405* Patch by Bill Hargen, 09 Dec 2003:
1406 - BUBINGA405EP: changed flash driver to protect top sector containing
1407 first instruction.
1408 - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
1409 - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
1410 - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
1411 - 405EP: added/fixed support for "reginfo" command.
1412 - 4xx: removed spurious MII error messages on "mii info" command.
1413
wdenkabf7a7c2003-12-08 01:34:36 +00001414* Patch by Bernhard Kuhn, 28 Nov 2003:
1415 add support for Coldfire CPU
1416 add support for Motorola M5272C3 and M5282EVB boards
1417
wdenk7f00b942003-12-07 23:55:12 +00001418* Patch by Pierre Aubert, 24 Nov 2003:
1419 - add a return value for the fpga command
1420 - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
1421 is defined. If ide_preinit fails, ide_init is aborted.
1422 - fix an endianess problem in fat.h
1423
wdenk174e0e52003-12-07 22:27:15 +00001424* Patch by Wolter Kamphuis, 05 Dec 2003:
1425 Add support for SNMC's QS850/QS823/QS860T boards
1426
wdenk444f22b2003-12-07 21:39:28 +00001427* Patch by Yuli Barcohen, 3 Dec 2003:
1428 "revive" U-Boot support for old Motorola MPC860ADS board
1429
1430* Patch by Cam(ilo?), 03 Dec 2003:
1431 make examples build even with broken Montavista objcopy
1432
1433* Patch by Pavel Bartusek, 27 Nov 2003:
1434 fix conversion problem with "bootretry" evironment variable
1435
wdenk4e7a58a2003-12-07 19:24:00 +00001436* Patch by Andre Schwarz, 24 Nov 2003:
1437 add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
1438
1439* Patch by Pavel Bartusek, 21 Nov 2003:
1440 set ZMII bridge speed on 440
1441
1442* Patch by Anders Larsen, 17 Nov 2003:
1443 Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
1444
wdenk4ea537d2003-12-07 18:32:37 +00001445* Patches by David Müller, 14 Nov 2003:
1446 - board/mpl/common/common_util.c
1447 * implement support for BZIP2 compressed images
1448 * various cleanups (printf -> puts, ...)
1449 - board/mpl/common/flash.c
1450 * report correct errors to upper layers
1451 * check the erase fail and VPP low bits in status reg
1452 - board/mpl/vcma9/cmd_vcma9.c
1453 - board/mpl/vcma9/flash.c
1454 * various cleanups (printf -> puts, ...)
1455 - common/cmd_usb.c
1456 * fix typo in comment
1457 - cpu/arm920t/usb_ohci.c
1458 * support for S3C2410 is missing in #if line
1459 - drivers/cs8900.c
1460 * reinit some registers in case of error (cable missing, ...)
1461 - fs/fat/fat.c
1462 * support for USB/MMC devices is missing in #if line
1463 - include/configs/MIP405.h
1464 - include/configs/PIP405.h
1465 * enable BZIP2 support
1466 * enlarge malloc space to 1MiB because of BZIP2 support
1467 - include/configs/VCMA9.h
1468 * enable BZIP2 support
1469 * enlarge malloc space to 1MiB because of BZIP2 support
1470 * enable USB support
1471 - lib_arm/armlinux.c
1472 * change calling convention of ARM Linux kernel as
1473 described on http://www.arm.linux.org.uk/developer/booting.php
1474
1475* Patch by Thomas Lange, 14 Nov 2003:
1476 Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
1477 support all these AMD boards.
1478
1479* Patch by Thomas Lange, 14 Nov 2003:
1480 Workaround for mips au1x00 physical memory accesses (the au1x00
1481 uses a 36 bit bus internally and cannot access physical memory
1482 directly. Use the uncached SDRAM address instead of the physical
1483 one.)
1484
wdenk5d5317e2003-12-07 00:46:27 +00001485* Patch by Xue Ligong (Joe), 13 Nov 2003:
1486 add Realtek 8019 ethernet driver
1487
1488* Patch by Yuli Barcohen, 13 Nov 2003:
1489 MPC826xADS/PQ2FADS cleanup
1490
1491* Patch by Anders Larsen, 12 Nov 2003:
1492 Update README to mark the PORTIO commands non-standard
1493
wdenk86765902003-12-06 23:55:10 +00001494* Patch by Nicolas Lacressonnière, 12 Nov 2003:
1495 update for for Atmel AT91RM9200DK development kit:
1496 - support for environment variables in DataFlash
1497 - Atmel DataFlash AT45DB1282 support
1498
1499* Patch by Jeff Carr, 11 Nov 2003:
1500 add support for new version of 8270 processors
1501
1502* Patches by George G. Davis, 05 Nov 2003:
1503 - only pass the ARM linux initrd tag to the kernel when an initrd
1504 is actually present
1505 - update omap1510inn configuration file
1506
wdenkf4cec3f2003-12-06 23:20:41 +00001507* Patches by Stephan Linz, 3 Nov 2003:
1508 - more endianess fixes for LAN91C111 driver
1509 - CFG_HZ configuration patch for NIOS Cyclone board
1510
1511* Patch by Stephan Linz, 28 Oct 2003:
1512 fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
1513
1514* Patch by Steven Scholz, 20 Oct 2003:
1515 - make "mii info <addr>" show infor for PHY at "addr" only
1516 - Endian fix for miiphy_info()
1517
wdenkc0aa5c52003-12-06 19:49:23 +00001518* Patch by Gleb Natapov, 19 Sep 2003:
1519 Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
1520
1521* Patch by Anders Larsen, 17 Sep 2003:
1522 Bring ARM memory layout in sync with the documentation:
1523 stack and malloc-heap are now located _below_ the U-Boot code
1524
wdenk768844e2003-12-06 11:20:01 +00001525* Accelerate booting on TRAB board: read and check autoupdate image
1526 headers first instead of always reading the whole images.
1527
wdenk1ae251b2003-12-05 21:08:38 +00001528* Fix type in MPC5XXX code (pointed out by Victor Wren)
1529
wdenk78ae91f2003-12-03 23:53:42 +00001530* Enabled password check on RMU board
1531
1532* Fix configuration problem with IceCube in LOWBOOT configuration:
1533 envrionment got embedded, corrupting the image layout.
1534
1535* Fix NEC display names (it's 6440 [for 640x480], not 6640).
1536
wdenkc0d54ae2003-11-25 16:55:19 +00001537* Added BMS2003 board
1538 add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
1539
wdenk9a1ff302003-11-17 21:45:27 +00001540* Fix flash driver for TRAB board (must use Unlock Bypass Reset
1541 command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
1542 and CPLD
1543
wdenkc6abb7e2003-11-17 21:14:37 +00001544* Use "-fPIC" instead of "-mrelocatable" to prevent problems with
1545 recent tools
1546
1547* Add checksum verification to 'imls' command
1548
1549* Add bd_info fields needed for 4xx Linux I2C driver
1550
1551* Patch by Martin Krause, 4 Nov. 2003:
1552 Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
1553
1554* Print used network interface when CONFIG_NET_MULTI is set
1555
wdenk4b16c2e2003-11-07 13:42:26 +00001556* Patch by Bernhard Kuhn, 28 Oct 2003:
1557 Add low boot support for MPC5200
1558
1559* Fix problem with dual PCMCIA support (NSCU)
1560
1561* Fix MPC5200 I2C initialization function
1562
1563======================================================================
wdenk934c4f82003-09-11 19:48:06 +00001564Changes for U-Boot 1.0.0:
1565======================================================================
1566
wdenk655a0f92003-10-30 21:49:38 +00001567* Fix parameter passing to standalone images with bootm command
1568
1569* Patch by Kyle Harris, 30 Oct 2003:
1570 Fix build errors for ixdp425 board
1571
1572* Patch by David M. Horn, 29 Oct 2003:
1573 Fixes to build under CYGWIN
1574
1575* Get IceCube MGT5100 working (again)
1576
wdenkb6c60cb32003-10-29 23:18:55 +00001577* Fix problems in memory test on some boards (which was not
1578 non-destructive as intended)
1579
1580* Patch by Gary Jennejohn, 28 Oct 2003:
1581 Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
1582 to prevent stack overflow on ARM systems
1583
wdenk55618472003-10-28 09:14:21 +00001584* Patch by Stephan Linz, 28 Oct 2003:
1585 fix init sequence error for NIOS port
1586
1587* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
1588
1589* Add CONFIG_VERSION_VARIABLE to TRAB configuration
1590
wdenka983cc22003-10-26 22:52:58 +00001591* Patch by Xiao Xianghua, 23 Oct 2003:
1592 small patch for mpc85xx
1593
1594* Fix small problem in MPC5200 I2C driver
1595
1596* Fix FCC3 support on ATC board
1597
dzu6605c842003-10-24 13:14:45 +00001598* Correct header printing for multi-image files in do_bootm()
1599
1600* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
1601
wdenk6fcda222003-10-22 09:00:28 +00001602* Fix PCI problems on PPChameleon board
1603
wdenk3da587e2003-10-19 23:22:11 +00001604* Patch by Steven Scholz, 18 Oct 2003:
1605 Fix AT91RM9200 ethernet driver
1606
1607* Patch by Nye Liu, 17 Oct 2003:
1608 Fix typo in include/mpc8xx.h
1609
1610* Patch by Richard Woodruff, 16 Oct 03:
1611 Fixes for cpu/arm925/interrupt.c
1612 - Initialize timestamp & lastdec vars.
1613 - fix timestamp overflows.
1614 - fix lastdec overflow.
1615 - smarter normalization to allow udelay() below 1ms to work.
1616
1617* Patch by Scott McNutt, 16 Oct
1618 add networking support for the Altera Nios Development Kit,
1619 Cyclone Edition (DK-1C20)
1620
1621* Patch by Jon Diekema, 14 Oct 2003:
1622 add hint about doc/README.silent to README file
1623
dzub02ed682003-10-19 21:43:26 +00001624* Add CompactFlash support for NSCU
1625
wdenkad7541e2003-10-19 22:30:08 +00001626* Fix PCI problems on PPChameleonEVB
1627
wdenk17d1a1d2003-10-16 12:53:35 +00001628* TRAB auto-update: Base decision if we have to strip the image
1629 header on image type as encoded in the header
wdenkad7541e2003-10-19 22:30:08 +00001630 (include image type patch by Martin Krause, 17 Oct 2003)
wdenk17d1a1d2003-10-16 12:53:35 +00001631
wdenk9c53f402003-10-15 23:53:47 +00001632* Patches by Xianghua Xiao, 15 Oct 2003:
1633
1634 - Added Motorola CPU 8540/8560 support (cpu/85xx)
1635 - Added Motorola MPC8540ADS board support (board/mpc8540ads)
1636 - Added Motorola MPC8560ADS board support (board/mpc8560ads)
1637
1638* Fix flash timings on TRAB board
1639
wdenkbd1575f2003-10-14 19:43:55 +00001640* Make sure HUSH is initialized for running auto-update scripts
1641
1642* Make 5200 reset command _really_ reset the board, without running
1643 any other code after it
1644
1645* Fix errors with flash erase when range spans across banks
1646 that are mapped in reverse order
1647
1648* Fix flash mapping and display on P3G4 board
1649
1650* Patch by Kyle Harris, 15 Jul 2003:
1651 - add support for Intel IXP425 CPU
1652 - add support for IXDP425 eval board
1653
wdenk808532a2003-10-10 10:05:42 +00001654* Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
1655 for more information
1656
wdenk9b7f3842003-10-09 20:09:04 +00001657* Patch by Steven Scholz, 10 Oct 2003
1658 - Add support for Altera FPGA ACEX1K
1659
wdenk9f837932003-10-09 19:00:25 +00001660* Patches by Thomas Lange, 09 Oct 2003:
1661 - fix cmd_ide.c for non ppc boards (read/write functions did not
1662 add ATA base address)
1663 - fix for shannon board
1664 - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
wdenk9b7f3842003-10-09 20:09:04 +00001665 - Endian swap ATA identity for all big endian CPUs, not just PPC
1666 - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
1667 args to linux
1668 - add support for dbau1x00 board (MIPS32)
wdenk9f837932003-10-09 19:00:25 +00001669
1670* Patch by Sangmoon Kim, 07 Oct 2003:
1671 add support for debris board
1672
wdenk61970fd2003-10-09 13:16:55 +00001673* Patch by Martin Krause, 09 Oct 2003:
1674 Fixes for TRAB board
1675 - /board/trab/rs485.c: correct baudrate
wdenk9c53f402003-10-15 23:53:47 +00001676 - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
wdenk61970fd2003-10-09 13:16:55 +00001677 udelay(); fix some timing problems with adc controller
1678 - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
1679 modify commands: touch and buzzer
1680
1681* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
1682 (quick & dirty workaround for rogue pointer problem in get_vfatname());
1683 Use direct function calls for auto_update instead of hush commands
1684
wdenk60164a82003-10-08 23:26:14 +00001685* Patch by Scott McNutt, 04 Oct 2003:
1686 - add support for Altera Nios-32 CPU
1687 - add support for Nios Cyclone Development Kit (DK-1C20)
1688
1689* Patch by Steven Scholz, 29 Sep 2003:
1690 - A second parameter for bootm overwrites the load address for
1691 "Standalone Application" images.
1692 - bootm sets environment variable "filesize" to the resulting
1693 (uncompressed) data length for "Standalone Application" images
1694 when autostart is set to "no". Now you can do something like
1695 if bootm $fpgadata $some_free_ram ; then
1696 fpga load 0 $some_free_ram $filesize
1697 fi
1698
1699* Patch by Denis Peter, 25 Sept 2003:
1700 add support for the MIP405 Rev. C board
1701
wdenk2f0812d2003-10-08 22:45:44 +00001702* Patch by Yuli Barcohen, 25 Sep 2003:
1703 add support for Zephyr Engineering ZPC.1900 board
1704
1705* Patch by Anders Larsen, 23 Sep 2003:
1706 add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
1707 implemented for the x86 architecture)
1708
wdenk49c3f672003-10-08 22:33:00 +00001709* Patch by Sangmoon Kim, 23 Sep 2003:
1710 fix pll_pci_to_mem_multiplier table for MPC8245
1711
1712* Patch by Anders Larsen, 22 Sep 2003:
1713 enable timed autoboot on PXA
1714
1715* Patch by David Müller, 22 Sep 2003:
wdenk49c3f672003-10-08 22:33:00 +00001716 - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
1717 returns correct libgcc file path
1718 - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
1719 time on s3c24x0 systems
1720
1721* Patch by Jon Diekema, 19 Sep 2003:
1722 - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
1723 link state to the fault LED.
1724 - In NetLoop, make the Fault LED reflect the link status. The link
1725 status gets updated on entry, and on timeouts.
wdenk9c53f402003-10-15 23:53:47 +00001726
wdenk1ee550e2003-10-08 22:14:02 +00001727* Patch by Anders Larsen, 18 Sep 2003:
1728 allow mkimage to build and run on Cygwin-hosted systems
1729
1730* Patch by Frank Müller, 18 Sep 2003:
1731 use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
1732 cpu/mpc8xx/fec.c
1733
1734* Patch by Pantelis Antoniou, 16 Sep 2003:
1735 add tool to compute fileds in the PLPRCR register for MPC86x
1736
wdenkec207f92003-10-07 20:01:55 +00001737* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
1738
wdenke97dcd02003-10-07 10:33:38 +00001739* Fix build problems under FreeBSD
1740
wdenk6cd4a5e2003-10-06 22:00:45 +00001741* Add generic filesystem image type
1742
wdenk7182b0f2003-10-06 21:55:32 +00001743* Make fatload set filesize environment variable
1744
1745* enable basic / medium / high-end configurations for PPChameleonEVB
1746 board; fix NAND code
1747
1748* enable TFTP client code to specify to the server the desired
1749 timeout value (see RFC-2349)
1750
dzu15b57c72003-09-30 15:22:12 +00001751* Improve SDRAM setup for TRAB board
1752
dzud5e45d82003-09-30 15:11:43 +00001753* Suppress all output with splashscreen configured only if "splashimage"
1754 is set
1755
dzuc9b08252003-09-30 14:36:51 +00001756* Fix problems with I2C support for mpc5200
1757
dzu8d7e4d12003-09-29 21:55:54 +00001758* Adapt TRAB configuration and auto_update to new memory layout
1759
dzu69438f62003-09-25 22:32:40 +00001760* Add configuration for wtk board
1761
dzufae2d812003-09-25 22:30:12 +00001762* Add support for the Sharp LQ065T9DR51U LCD display
1763
wdenk8706ea82003-09-18 10:02:25 +00001764* Patch by Rune Torgersen, 17 Sep 2003:
1765 - Fixes for MPC8266 default config
wdenk5256def2003-09-18 10:45:21 +00001766 - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
wdenk8706ea82003-09-18 10:02:25 +00001767
1768* Patches by Jon Diekema, 17 Sep 2003:
1769 - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
1770 env_common.c)
1771 - sbc8260 tweaks
1772 - adjust "help" output
1773
wdenk5958f4a2003-09-18 09:21:33 +00001774* Patches by Anders Larsen, 17 Sep 2003:
1775 - fix spelling errors
1776 - set GD_FLG_DEVINIT flag only after device function pointers
1777 are valid
1778 - Allow CFG_ALT_MEMTEST on systems where address zero isn't
1779 writeable
1780 - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
1781 - trigger watchdog while waiting in serial driver
1782
wdenkb6b2f0e2003-09-17 22:48:07 +00001783* Add auto-update code for TRAB board using USB memory sticks,
1784 support new configuration with more memory
wdenkf6a6ac12003-09-17 15:10:32 +00001785
wdenk7f202b92003-09-16 17:35:37 +00001786* disable MPC5200 bus pipelining as workaround for bus contention
1787
wdenkf5547d32003-09-16 17:06:05 +00001788* Modify XLB arbiter priorities on MPC5200 so all devices use same
1789 priority; configure critical interrupts to be handled like external
1790 interrupts
1791
wdenk6e2bf7a2003-09-16 11:39:10 +00001792* Make IPB clock on MGT5100/MPC5200 configurable in board config file;
1793 go back to 66 MHz for stability
1794
wdenk1f197c62003-09-15 18:00:00 +00001795* Patches by Jon Diekema, 15 Sep 2003:
1796 - add description for missing CFG_CMD_* entries in the README file
1797 - sacsng tweaks
1798
wdenkfc314ce2003-09-14 19:08:39 +00001799* Patch by Gleb Natapov, 14 Sep 2003:
1800 enable watchdog support for all MPC824x boards that have a watchdog
1801
1802* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
1803 "Non-octet Aligned Frame" errors we see at 100 Mbps
1804
1805* Patch by Sharad Gupta, 14 Sep 2003:
1806 fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
1807
wdenkbd08bc42003-09-13 19:13:29 +00001808* Patch by llandre, 11 Sep 2003:
1809 update configuration for PPChameleonEVB board
1810
wdenk25521902003-09-13 19:01:12 +00001811* Patch by David Müller, 13 Sep 2003:
1812 various changes to VCMA9 board specific files
1813
1814* Add I2C support for MGT5100 / MPC5200
1815
wdenkf28560f2003-09-12 20:09:09 +00001816* Patch by Rune Torgersen, 11 Sep 2003:
1817 Changed default memory option on MPC8266ADS to NOT be Page Based
1818 Interleave, since this doesn't work very well with the standard
1819 16MB DIMM
1820
1821* Patch by George G. Davis, 12 Sep 2003:
1822 fix Makefile settings for sk98 driver
1823
stroese84da3532003-09-12 08:57:52 +00001824* Patch by Stefan Roese, 12 Sep 2003:
1825 - new boards added: DP405, HUB405, PLU405, VOH405
1826 - some esd boards updated
1827 - cpu/ppc4xx/sdram.c: disable memory controller before setting
1828 first values
1829 - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
1830
wdenk4cc02a82003-09-11 23:06:34 +00001831* Patch by Martin Krause, 11 Sep 2003:
1832 add burn-in tests for TRAB board
1833
1834* Enable instruction cache on MPC5200 board
1835
wdenk934c4f82003-09-11 19:48:06 +00001836* Patch by Denis Peter, 11 Sep 2003:
1837 - fix USB data pointer assignment for bulk only transfer.
1838 - prevent to display erased directories in FAT filesystem.
1839
1840* Change output format for NAND flash - make it look like for other
1841 memory, too
1842
1843======================================================================
wdenkde887eb2003-09-10 18:20:28 +00001844Changes for U-Boot 0.4.8:
wdenk2bb11052003-07-17 23:16:40 +00001845======================================================================
1846
dzufae2d812003-09-25 22:30:12 +00001847* Add I2C and RTC support for RMU board
1848
wdenk2c9b05d2003-09-10 22:30:53 +00001849* Patches by Denis Peter, 9 Sep 2003:
1850 add FAT support for IDE, SCSI and USB
1851
1852* Patches by Gleb Natapov, 2 Sep 2003:
1853 - cleanup of POST code for unsupported architectures
1854 - MPC824x locks way0 of data cache for use as initial RAM;
1855 this patch unlocks it after relocation to RAM and invalidates
1856 the locked entries.
1857
1858* Patch by Gleb Natapov, 30 Aug 2003:
1859 new I2C driver for mpc107 bridge. Now works from flash.
1860
1861* Patch by Dave Ellis, 11 Aug 2003:
1862 - JFFS2: fix typo in common/cmd_jffs2.c
1863 - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
1864 - JFFS2: remove node version 0 warning
1865 - JFFS2: accept JFFS2 PADDING nodes
1866 - SXNI855T: add AM29LV800 support
1867 - SXNI855T: move environment from EEPROM to flash
1868 - SXNI855T: boot from JFFS2 in NOR or NAND flash
1869
1870* Patch by Bill Hargen, 11 Aug 2003:
1871 fixes for I2C on MPC8240
1872 - fix i2c_write routine
1873 - fix iprobe command
1874 - eliminates use of global variables, plus dead code, cleanup.
1875
wdenkde887eb2003-09-10 18:20:28 +00001876* Add support for USB Mass Storage Devices (BBB)
1877 (tested with USB memory sticks only)
1878
1879* Avoid flicker on TRAB's VFD
1880
wdenkeb20ad32003-09-05 23:19:14 +00001881* Add support for SK98xx driver
1882
1883* Add PCI support for SL8245 board
1884
1885* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
1886 or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
1887 Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
1888
1889* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
1890 to allow for more accurate baudrate settings
1891 (error now 0.7% at 115 kbps, instead of 3.5% before)
1892
1893* Patch by Andreas Mohr, 4 Sep 2003:
1894 Fix a lot of spelling errors
1895
wdenk232fe0b2003-09-02 22:48:03 +00001896* Add support for PPChameleon Eval Board
1897
1898* Add support for P3G4 board
1899
1900* Fix problem with MGT5100 FEC driver: add "early" MAC address
1901 initialization
1902
wdenk9a8965d2003-08-31 18:37:54 +00001903* Patch by Yuli Barcohen, 7 Aug 2003:
1904 check BCSR to detect if the board is configured in PCI mode
1905
wdenkde887eb2003-09-10 18:20:28 +00001906======================================================================
1907Changes for U-Boot 0.4.7:
1908======================================================================
1909
wdenk84650f52003-08-30 00:05:50 +00001910* Patch by Raghu Krishnaprasad, 7 Aug 2003:
1911 add support for Adder II MPC852T module
1912
wdenk7eaacc52003-08-29 22:00:43 +00001913* Patch by George G. Davis, 19 Aug 2003:
1914 fix TI Innovator/OMAP1510 pin configs
1915
1916* Patches by Kshitij, 18 Aug 2003
1917 - add support for arm926ejs cpu core
1918 - add support for TI OMAP 1610 Innovator Board
1919
wdenk710e3502003-08-29 20:57:53 +00001920* Patch by Yuli Barcohen, 14 Aug 2003:
1921 add support for bzip2 uncompression
1922
1923* Add GCC library to examples/Makefile so GCC utility functions will
1924 be resolved, too
1925
wdenk2191f502003-08-29 10:05:53 +00001926* Add I2C and RTC support for RMU board using software I2C driver
1927 (because of better response to iprobe command); fix problem with
1928 "reset" command
1929
stroese20a26922003-08-28 14:24:37 +00001930* Patch by Matthias Fuchs, 28 Aug 2003:
1931 Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
1932 CONFIG_BOOTP_MAKS (see README).
1933
wdenkb10ba6b2003-08-28 09:41:22 +00001934* Fix ICU862 environment problem
1935
1936* Fix RAM size detection for RMU board
1937
1938* Implement "reset" for MGT5100/MPC5200 systems
1939
1940======================================================================
1941Changes for U-Boot 0.4.6:
1942======================================================================
1943
wdenk5d841732003-08-17 18:55:18 +00001944* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
1945 allow selection of clock frequency as "make" target
1946
1947* Implement memory autosizing code for IceCube boards
1948
1949* Configure network port on INCA-IP for autonegotiation
1950
1951* Fix overflow problem in network timeout code
1952
1953* Patch by Richard Woodruff, 8 Aug 2003:
1954 Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
1955
wdenkb10ba6b2003-08-28 09:41:22 +00001956======================================================================
1957Changes for U-Boot 0.4.5:
1958======================================================================
1959
wdenkfb229ae2003-08-07 22:18:11 +00001960* Update for TQM board defaults:
1961 disable clocks_in_mhz, enable boot count limit
1962
dzuf6565c62003-08-07 15:04:48 +00001963* Removed tools/gdb from "make all" target. Added make target "gdbtools"
1964 in toplevel directory instead. Removed astest.c from tools/gdb because
1965 it is no longer relevant.
1966
wdenk02379022003-08-05 18:22:44 +00001967* Fix PCI support for MPC5200 / IceCube Board
1968
wdenk0a658552003-08-05 17:43:17 +00001969* Map ISP1362 USB OTG controller for NSCU board
1970
1971* Patch by Brad Parker, 02 Aug 2003:
1972 fix sc520_cdp problems
1973
1974* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
1975
1976* Allow erase command to cross flash bank boundaries
1977
wdenke58b0dc2003-07-27 00:21:01 +00001978* Patch by Scott McNutt, 21 Jul 2003:
1979 Add support for LynuxWorks Kernel Downloadable Images (KDIs).
1980 Both LynxOS and BlueCat linux KDIs are supported.
1981
1982* Patch by Richard Woodruff, 25 Jul 2003:
1983 use more reliable reset for OMAP/925T
1984
1985* Patch by Nye Liu, 25 Jul 2003:
1986 fix typo in mpc8xx.h
1987
1988* Patch by Richard Woodruff, 24 Jul 2003:
1989 Fixes for cmd_nand.c:
1990 - Fixed null dereferece which could result in incorrect ECC values.
1991 - Added support for devices with no Ready/Busy signal hooked up.
1992 - Added OMAP1510 read/write protect handling.
1993 - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
1994 for non-JFFS2.
1995 - Switched default ECC to be JFFS2.
1996
wdenkb8463562003-07-26 08:08:08 +00001997* Allow crc32 to be used at address 0x000
1998
1999* Provide consistent interface to standalone applications to access
2000 the 'global_data' structure
2001 Provide a doc/README.standalone more useful to users/developers.
2002
2003* Make IceCube MGT5100 FEC driver work
2004
wdenk874ac262003-07-24 23:38:38 +00002005* Implement new mechanism to export U-Boot's functions to standalone
2006 applications: instead of using (PPC-specific) system calls we now
2007 use a jump table; please see doc/README.standalone for details
2008
2009* Patch by Dave Westwood, 24 Jul 2003:
2010 added support for Unity OS (a proprietary OS)
2011
2012* Patch by Detlev Zundel, 23 Jul 2003:
2013 add "imls" command to print flash table of contents
2014
2015* Fix cold boot detection for log buffer reset
2016
2017* Return error for invalid length specifiers with "cp.X" etc.
2018
2019* Fix startup problem on MIPS
2020
2021* Allow for CONFIG_SPLASH_SCREEN even when no explicit
2022 bitmap support is configured
2023
2024* Patch by Bill Hargen, 18 Jul 2003:
2025 - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
2026
2027* Patch by Denis Peter, 18 Jul 2003:
2028 - fix memory configuration for MIP405T
2029 - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
2030
2031* Cleanup of TQM82xx configurations; use "official" board types
2032 to make selection easier.
2033
wdenk2bb11052003-07-17 23:16:40 +00002034* Patch by Martin Krause, 17 Jul 2003:
2035 add delay to get I2C working with "imm" command and s3c24x0_i2c.c
2036
2037* Patch by Richard Woodruff, 17 July 03:
stroese20a26922003-08-28 14:24:37 +00002038 - Fixed bug in OMAP1510 baud rate divisor settings.
wdenk2bb11052003-07-17 23:16:40 +00002039
2040* Patch by Nye Liu, 16 July 2003:
2041 MPC860FADS fixes:
2042 - add MPC86xADS support (uses MPC86xADS.h)
2043 - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
2044 o PLPRCR changes
2045 o BRG changes (EXTAL/XTAL restricted to 10MHz)
2046 o don't trust gclk() software measurement by default, depend on
2047 CONFIG_8xx_GCLK_FREQ
2048 - add DRAM SIMM not installed detection
2049 - use more "correct" SDRAM initialization sequence
2050 - allow different SDRAM sizes (8xxADS has 8M)
2051 - default DER is 0
2052 - remove unused MAMR defines from FADS860T.h (all done in fads.c)
2053 - rename MAMR/MBMR defines to be more consistent. Should eventually
2054 be merged into MxMR to better reflect the PowerQUICC datasheet.
2055
2056* Patch by Yuli Barcohen, 16 Jul 2003:
2057 support new Motorola PQ2FADS-ZU evaluation board which replaced
2058 MPC8260ADS and MPC8266ADS
2059
2060======================================================================
wdenk21136db2003-07-16 21:53:01 +00002061Changes for U-Boot 0.4.4:
2062======================================================================
2063
2064* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
2065
2066* Add support for MGT5100 and MPC5200 processors
2067
2068* Patch by Lutz Dennig, 15 Jul 2003:
2069 update for R360MPI board
2070
2071======================================================================
wdenkdccbda02003-07-14 22:13:32 +00002072Changes for U-Boot 0.4.3:
wdenkb9bbd242003-06-30 16:24:52 +00002073======================================================================
2074
wdenkf6f96f72003-07-15 20:04:06 +00002075* Patches by Kshitij, 04 Jul 2003
wdenk21136db2003-07-16 21:53:01 +00002076 - added support for arm925t cpu core
wdenkf6f96f72003-07-15 20:04:06 +00002077 - added support for TI OMAP 1510 Innovator Board
2078
wdenkca9bc762003-07-15 07:45:49 +00002079* Patches by Martin Krause, 14 Jul 2003:
2080 - add I2C support for s3c2400 systems (trab board)
2081 - (re-) add "ping" to command table
2082
2083* Fix handling of "slow" POST routines
2084
wdenkdccbda02003-07-14 22:13:32 +00002085* Patches by Yuli Barcohen, 13 Jul 2003:
2086 - Correct flash and JFFS2 support for MPC8260ADS
2087 - fix PVR values and clock generation for PowerQUICC II family
2088 (8270/8275/8280)
2089
2090* Patch by Bernhard Kuhn, 08 Jul 2003:
2091 - add support for M68K targets
2092
2093* Patch by Ken Chou, 3 Jul:
2094 - Fix PCI config table for A3000
2095 - Fix iobase for natsemi.c
2096 (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
wdenk21136db2003-07-16 21:53:01 +00002097
wdenkdccbda02003-07-14 22:13:32 +00002098* Allow to enable "slow" POST routines by key press on power-on
2099* Fix temperature dependend switching of LCD backlight on LWMON
2100* Tweak output format for LWMON
2101
stroesebe848492003-07-11 08:23:12 +00002102* Patch by Stefan Roese, 11 Jul 2003:
2103 - Fix bug in CONFIG_VERSION_VARIABLE.
2104 - AR405 config updated.
2105 - OCRTC/ORSG: bsp command added.
2106 - ASH405 bsp update.
2107
wdenkdccbda02003-07-14 22:13:32 +00002108======================================================================
2109Changes for U-Boot 0.4.2:
2110======================================================================
2111
wdenk69141282003-07-07 20:07:54 +00002112* Add support for NSCU board
2113
2114* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
2115
2116* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
2117 mirror bit flash on TQM8xxM modules
2118
wdenkf287a242003-07-01 21:06:45 +00002119* Patch by Kenneth Johansson, 30 Jun 2003:
2120 get rid of MK_CMD_ENTRY macro; update doc/README.command
2121
wdenkb9bbd242003-06-30 16:24:52 +00002122* Patch by Seb James, 30 Jun 2003:
2123 Improve documentation of I2C configuration in README
2124
2125* Fix problems with previous log buffer "fixes"
2126
2127* Fix minor help text issues
2128
2129* "log append" did not append a newline
2130
2131======================================================================
wdenkf12e3962003-06-29 21:03:46 +00002132Changes for U-Boot 0.4.1:
wdenkc08f1582003-04-27 22:52:51 +00002133======================================================================
2134
wdenkf12e3962003-06-29 21:03:46 +00002135* Fix some missing commands, cleanup header files
2136 (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
2137
wdenk3086a972003-06-28 23:11:04 +00002138* Rewrite command lookup and help command (fix problems with bubble
2139 sort when sorting command name list). Minor cleanup here and there.
2140
wdenkd9fce812003-06-28 17:24:46 +00002141* Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
2142 - Allow to call sysmon function interactively
2143 - PIC on LWMON board needs delay after power-on
2144 - Add missing RSR definitions for MPC8xx
2145 - Improve log buffer handling: guarantee clean reset after power-on
wdenkde887eb2003-09-10 18:20:28 +00002146 - Add support for EXBITGEN board (aka "genie")
wdenkd9fce812003-06-28 17:24:46 +00002147 - Add support for SL8245 board
2148
wdenk57b2d802003-06-27 21:31:46 +00002149* Code cleanup:
2150 - remove trailing white space, trailing empty lines, C++ comments, etc.
2151 - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
2152
2153* Patches by Kenneth Johansson, 25 Jun 2003:
2154 - major rework of command structure
2155 (work done mostly by Michal Cendrowski and Joakim Kristiansen)
2156
2157======================================================================
2158Changes for U-Boot 0.4.0:
2159======================================================================
2160
wdenk70764a32003-06-26 22:04:09 +00002161* Patches by Robert Schwebel, 26 Jun 2003:
wdenk57b2d802003-06-27 21:31:46 +00002162 - csb226 configuration updated
2163 - credits for logodl port updated
2164 - innokom configuration updated
2165 - logodl tree update, still with coding style inconsistencies
2166 - added OCM for ppc405 warning to README
wdenk70764a32003-06-26 22:04:09 +00002167
2168* Patch by Pantelis Antoniou, 25 Jun 2003:
2169 update NetVia with V2 board support
2170
wdenkbb2d9272003-06-25 22:26:29 +00002171* Header file cleanup for ARM
2172
2173* Patch by Murray Jensen, 24 Jun 2003:
2174 - make sure to use only U-boot provided header files
2175 - fix problems with ".rodata.str1.4" section as used by GCC-3.x
2176
stroeseab2751b2003-06-24 14:32:24 +00002177* Patch by Stefan Roese, 24 Jun 2003:
2178 - Update esd ASH405 board files.
2179 - Update esd DASA_SIM config file.
2180 - Add ping command to some esd boards.
2181
wdenk88d2ba92003-06-23 18:12:28 +00002182* Patch by Yuli Barcohen, 23 Jun 2003:
2183 Update for MPC8260ADS board
2184
2185* Patch by Murray Jensen, 23 Jun 2003:
2186 - cleanup of GCC 3.x compiler warnings
2187
wdenk56958612003-06-22 17:18:28 +00002188* Patch by Rune Torgersen, 4 Jun 2003:
2189 add large memory support for MPC8266ADS board
stroeseab2751b2003-06-24 14:32:24 +00002190
wdenk56958612003-06-22 17:18:28 +00002191* Patch by Richard Woodruff, 19 June 03:
2192 - Enabled standard u-boot device abstraction for ARM
2193 - Enabled console device for ARM
2194 - Initilized bi_baudrate for ARM
2195
2196* Patch by Bill Hargen, 23 Apr 2003:
2197 fix byte order for 824x I2C addresses (write op)
2198
wdenkdbae5042003-06-21 00:17:24 +00002199* Patch by Murray Jensen, 20 Jun 2003:
2200 - hymod update
2201 - cleanup (especially for gcc-3.x compilers)
2202
wdenkaaf48a92003-06-20 23:10:58 +00002203* Patch by Tom Guilliams, 20 Jun 2003:
2204 added CONFIG_750FX support for IBM 750FX processors
2205
wdenk8aeb24e2003-06-20 22:36:30 +00002206* Patch by Devin Crumb, 02 Apr 2003:
2207 Fix clock divider rounding problem in drivers/serial.c
2208
2209* Patch by Richard Woodruff, 19 June 03:
2210 - Fixed smc91c111 driver to sync with the u-boot environment
2211 (driver/smc91c111.c).
wdenk3e8b7dc2003-06-19 23:58:30 +00002212 - Added eth_init error return check in NetLoop (net/net.c).
2213
wdenk8aeb24e2003-06-20 22:36:30 +00002214* Patch by Ken Chou, 19 June 2003:
wdenk3e8b7dc2003-06-19 23:58:30 +00002215 Added support for A3000 SBC board (Artis Microsystems Inc.)
2216
wdenkb00ec162003-06-19 23:40:20 +00002217* Patches by Murray Jensen, 17 Jun 2003:
2218 - Hymod board database mods: add "who" field and new xilinx chip types
2219 - provide new "init_cmd_timeout()" function so code external to
2220 "common/main.c" can use the "reset_cmd_timeout()" function before
2221 entering the main loop
2222 - add DTT support for adm1021 (new file dtt/adm1021.c; config
2223 slightly different. see include/configs/hymod.h for an example
2224 (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
2225 CFG_DTT_ADM1021 defined)
2226 - add new "eeprom_probe()" function which has similar args and
2227 behaves in a similar way to "eeprom_read()" etc.
2228 - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
2229 function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
2230 - gdbtools copyright update
2231 - ensure that set_msr() executes the "sync" and "isync" instructions
2232 after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
2233 - 8260 I/O ports fix: Open Drain should be set last when configuring
2234 - add SIU IRQ defines for 8260
2235 - allow LDSCRIPT override and OBJCFLAGS initialization: change to
2236 config.mk to allow board configurations to override the GNU
2237 linker script, selected via the LDSCRIPT, make variable, and to
2238 give an initial value to the OBJCFLAGS make variable
2239 - 8260 i2c enhancement:
2240 o correctly extends the timeout depending on the size of all
2241 queued messages for both transmit and receive
2242 o will not continue with receive if transmit times out
2243 o ensures that the error callback is done for all queued tx
2244 and rx messages
2245 o correctly detects both tx and rx timeouts, only delivers one to
2246 the callback, and does not overwrite an earlier error
2247 o logic in i2c_probe now correct
2248 - add "vprintf()" function so that "panic()" function can be
2249 technically correct
2250 - many Hymod board changes
2251
wdenk88e72a32003-06-19 23:04:19 +00002252* Patches by Robert Schwebel, 14 Jun 2003:
2253 - add support for Logotronic DL datalogger board
2254 - cleanup serial line after kermit binary download
2255 - add debugX macro (debug level support)
2256 - update mach-types.h to latest arm.linux.org.uk master list.
2257
wdenk7539dea2003-06-19 23:01:32 +00002258* Patches by David Müller, 12 Jun 2003:
2259 - rewrite of the S3C24X0 register definitions stuff
2260 - "driver" for the built-in S3C24X0 RTC
2261
2262* Patches by Yuli Barcohen, 12 Jun 2003:
2263 - Add MII support and Ethernet PHY initialization for MPC8260ADS board
2264 - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
2265 configuration word supplied by FPGA on some MPC8260ADS boards
2266
2267* Patch by Pantelis Antoniou, 10 Jun 2003:
2268 Unify status LED interface
2269
wdenkd155afb2003-06-18 20:22:24 +00002270* Add support for DS12887 RTC; add RTC support for ATC board
2271
wdenk381669a2003-06-16 23:50:08 +00002272* Patch by Nicolas Lacressonniere, 11 Jun 2003:
2273 Modifications for Atmel AT91RM9200DK ARM920T based development kit
2274 - Add Atmel DataFlash support for reading and writing.
stroeseab2751b2003-06-24 14:32:24 +00002275 - Add possibility to boot a Linux from DataFlash with BOOTM command.
wdenk381669a2003-06-16 23:50:08 +00002276 - Add Flash detection on Atmel AT91RM9200DK
2277 (between Atmel AT49BV1614 and AT49BV1614A flashes)
2278 - Replace old Ethernet PHY layer functions
2279 - Change link address
2280
2281* Patch by Frank Smith, 9 Jun 2003:
2282 use CRIT_EXCEPTION for machine check on 4xx
2283
2284* Patch by Detlev Zundel, 13 Jun 2003:
2285 added implementation of the "carinfo" command in cmd_immap.c
2286
wdenk7a428cc2003-06-15 22:40:42 +00002287* Fix CONFIG_NET_MULTI support in include/net.h
2288
2289* Patches by Kyle Harris, 13 Mar 2003:
2290 - Add FAT partition support
2291 - Add command support for FAT
2292 - Add command support for MMC
2293 ----
2294 - Add Intel PXA support for video
2295 - Add Intel PXA support for MMC
2296 ----
2297 - Enable MMC and FAT for lubbock board
2298 - Other misc changes for lubbock board
2299
wdenkb2abefb2003-06-06 11:20:01 +00002300* Patch by Robert Schwebel, April 02, 2003:
2301 fix for SMSC91111 driver
2302
wdenk77934442003-06-05 19:37:36 +00002303* Patch by Vladimir Gurevich, 04 Jun 2003:
2304 make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
2305
stroese98636162003-06-05 15:44:37 +00002306* Patch by Stefan Roese, 05 Jun 2003:
2307 - PPC4xx: Fix bug for initial stack in data cache as pointed out by
2308 Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
2309 data cache can be used even if the chip select is in use.
2310 - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
2311 (see README for further description).
2312 - Changed config files of CONFIG_EEPRO100 boards to use the
2313 CFG_RX_ETH_BUFFER define.
2314
wdenke6466f62003-06-05 19:27:42 +00002315* Add support for RMU board
2316
2317* Add support for TQM862L at 100/50 MHz
2318
2319* Patch by Pantelis Antoniou, 02 Jun 2003:
2320 major reconstruction of networking code;
2321 add "ping" support (outgoing only!)
2322
wdenke39c2842003-06-04 15:05:30 +00002323* Patch by Denis Peter, 04 June 2003:
2324 add support for the MIP405T board
2325
wdenk4e112c12003-06-03 23:54:09 +00002326* Patches by Udi Finkelstein, 2 June 2003:
2327 - Added support for custom keyboards, initialized by defining a
2328 board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
2329 - Added support for the RBC823 board.
2330 - cpu/mpc8xx/lcd.c now automatically calculates the
2331 Horizontal Pixel Count field.
2332
2333* Fix alignment problem in BOOTP (dhcp_leasetime option)
2334 [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
2335
2336* Patch by Mark Rakes, 14 May 2003:
2337 add support for Intel e1000 gig cards.
2338
2339* Patch by Nye Liu, 3 Jun 2003:
2340 fix critical typo in MAMR definition (include/mpc8xx.h)
2341
2342* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
2343
2344* Patch by Klaus Heydeck, 2 Jun 2003
2345 Minor changes for KUP4K configuration
2346
wdenkabda5ca2003-05-31 18:35:21 +00002347* Patch by Marc Singer, 29 May 2003:
2348 Fixed rarp boot method for IA32 and other little-endian CPUs.
2349
2350* Patch by Marc Singer, 28 May 2003:
2351 Added port I/O commands.
2352
2353* Patch by Matthew McClintock, 28 May 2003
2354 - cpu/mpc824x/start.S: fix relocation code when booting from RAM
2355 - minor patches for utx8245
2356
2357* Patch by Daniel Engström, 28 May 2003:
2358 x86 update
2359
2360* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
2361 add nand flash support to SXNI855T configuration
2362 fix/extend nand flash support:
2363 - fix 'nand erase' command so does not erase bad blocks
2364 - fix 'nand write' command so does not write to bad blocks
2365 - fix nand_probe() so handles no flash detected properly
2366 - add doc/README.nand
2367 - add .jffs2 and .oob options to nand read/write
2368 - add 'nand bad' command to list bad blocks
2369 - add 'clean' option to 'nand erase' to write JFFS2 clean markers
2370 - make NAND read/write faster
2371
2372* Patch by Rune Torgersen, 23 May 2003:
2373 Update for MPC8266ADS board
2374
wdenkb9a83a92003-05-30 12:48:29 +00002375* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
2376 instead CFG_MONITOR_LEN is now only used to determine _at_compile_
2377 _time_ (!) if the environment is embedded within the U-Boot image,
2378 or in a separate flash sector.
2379
2380* Cleanup CFG_DER #defines in config files (wd maintained only)
2381
wdenkf4688a22003-05-28 08:06:31 +00002382* Fix data abort exception handling for arm920t CPU
2383
2384* Fix alignment problems with flash driver for TRAB board
2385
2386* Patch by Donald White, 21 May 2003:
2387 fix calculation of base address in pci_hose_config_device()
2388
2389* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
2390 execute "cmd2", even if "cmd1" fails. Note that this is different
2391 to "run var1 var2" where the contents of "var2" will NOT be
2392 executed when a command in "var1" fails.
2393
wdenk6f770ed2003-05-23 23:18:21 +00002394* Add zero-copy ramdisk support (requires corresponding kernel support!)
2395
wdenk0463e042003-05-23 12:36:20 +00002396* Patch by Kyle Harris, 20 May 2003:
2397 In preparation for an ixp port, rename cpu/xscale and arch-xscale
2398 into cpu/pxa and arch-pxa.
2399
stroeseab38cf32003-05-23 11:49:24 +00002400* Patch by Stefan Roese, 23 May 2003:
2401 - IBM PPC405EP port added.
2402 - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
2403 UART0) is used as default U-Boot console. PPC4xx only!
2404 - esd ASH405 board added (PPC405EP based).
2405 - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
2406 - esd CPCI405AB board added.
2407 - esd PMC405 board added.
2408 - Update of some esd boards.
2409
wdenk7d076412003-05-23 11:38:58 +00002410* Patch by Denis Peter, 19 Mai 2003:
2411 add support for the MIP405-3 board
2412
wdenkbf2f8c92003-05-22 22:52:13 +00002413* Patch by Dave Ellis, 22 May 2003:
2414 Fix problem with only partially cleared .bss segment
2415
2416* Patch by Rune Torgersen, 12 May 2003:
2417 get PCI to work on a MPC8266ADS board; incorporate change to
2418 cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
2419
2420* Patch by Nye Liu, 1 May 2003:
2421 minor patches for the FADS8xx
2422
2423* Patch by Thomas Schäfer, 28 Apr 2003:
2424 Fix SPD handling for 256 ECC DIMM on Walnut
2425
wdenk6bd7b5d2003-05-21 20:26:20 +00002426* Add support for arbitrary bitmaps for TRAB's VFD command;
2427 allow to pass boot bitmap addresses in environment variables;
2428 allow for zero boot delay
wdenk26991552003-05-20 20:49:01 +00002429
2430* Patch by Christian Geißinger, 19 May 2002:
2431 On TRAB: wait until the dummy byte has been completely sent
2432
wdenk0893c472003-05-20 14:25:27 +00002433* Patch by David Updegraff, 22 Apr 2003:
2434 update for CrayL1 board
2435
2436* Patch by Pantelis Antoniou, 21 Apr 2003:
2437 add boot support for ARTOS (a proprietary OS)
2438
2439* Patch by Steven Scholz, 11 Apr 2003:
2440 Add support for RTC DS1338
2441
2442* Patch by Rod Boyce, 24 Jan 2003:
2443 Fix counting of extended partitions in diskboot command
2444
wdenkc394e392003-05-20 10:58:04 +00002445* Patch by Christophe Lindheimer, 20 May 2003:
2446 allow the use of CFG_LOADS when CFG_NO_FLASH is set
2447
wdenk6099e872003-05-20 10:39:44 +00002448* Fix SDRAM timing on Purple board
2449
wdenke5d61c72003-05-18 11:30:09 +00002450* Add support for CompactFlash on ATC board
2451 (includes support for Intel 82365 and compatible PC Card controllers,
2452 and Yenta-compatible PCI-to-CardBus controllers)
2453
wdenkaa603362003-05-12 21:50:16 +00002454* Patch by Mathijs Haarman, 08 May 2003:
2455 Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
2456
wdenke2e3f632003-05-03 23:33:47 +00002457* Fix problem with usage of "true" (undefined in current versions of bfd.h)
2458
wdenk541a76d2003-05-03 15:50:43 +00002459* Add support for Promess ATC board
2460
2461* Patch by Keith Outwater, 28 Apr 2003:
2462 - Miscellaneous corrections and additions to GEN860T board specific code.
2463 - Added GEN860_SC variant to GEN860T.
2464 - Miscellaneous corrections to GEN860T documentation.
2465 - Correct duplicate entry in U-Boot CREDITS file.
2466 - Add GEN860T_SC entry in MAINTAINERS file.
2467 - Update CREDITS file with GEN860T_SC info.
2468
2469* Update Smiths Aerospace addresses in MAINTAINERS file
2470
2471* Fix error handling in hush's version of "run" command
2472
wdenkc08f1582003-04-27 22:52:51 +00002473* LWMON extensions:
2474 - Splashscreen support
2475 - modem support
2476 - sysmon support
2477 - temperature dependend enabling of LCD
2478
2479* Allow booting from old "PPCBoot" disk partitions
2480
2481* Add support for TQM8255 Board / MPC8255 CPU
2482
2483======================================================================
wdenkedaa4892003-04-20 17:41:25 +00002484Changes for U-Boot 0.3.1:
wdenk6bd14892003-04-10 11:18:18 +00002485======================================================================
2486
wdenk92bbe3f2003-04-20 14:04:18 +00002487* Make sure Block Lock Bits get cleared in R360MPI flash driver
2488
2489* MPC823 LCD driver: Fill color map backwards, to allow for steady
2490 display when Linux takes over
2491
2492* Patch by Erwin Rol, 27 Feb 2003:
2493 Add support for RTEMS (this time for real).
2494
2495* Add support for "bmp info" and "bmp display" commands to load
2496 bitmap images; this can be used (for example in a "preboot"
2497 command) to display a splash screen very quickly after poweron.
2498
2499* Add support for 133 MHz clock on INCA-IP board
2500
wdenk3f9ab982003-04-12 23:38:12 +00002501* Patch by Lutz Dennig, 10 Apr 2003:
2502 Update for R360MPI board
2503
2504* Add new meaning to "autostart" environment variable:
2505 If set to "no", a standalone image passed to the
2506 "bootm" command will be copied to the load address
2507 (and eventually uncompressed), but NOT be started.
2508 This can be used to load and uncompress arbitrary
2509 data.
2510
stroeseee14b832003-04-10 13:30:28 +00002511* Patch by Stefan Roese, 10 Apr 2003:
wdenk3f9ab982003-04-12 23:38:12 +00002512 Changed DHCP client to use IP address from server option field #54
2513 from the OFFER packet in the server option field #54 in the REQUEST
2514 packet. This fixes a problem using a Windows 2000 DHCP server,
2515 where the DHCP-server is not the TFTP-server.
2516
2517* Set max brightness for MN11236 displays on TRAB board
stroeseee14b832003-04-10 13:30:28 +00002518
wdenk6bd14892003-04-10 11:18:18 +00002519* Add support for TQM862L modules
2520
2521======================================================================
wdenka6db71d2003-04-08 23:25:21 +00002522Changes for U-Boot 0.3.0:
wdenkeda42082003-01-17 16:27:01 +00002523======================================================================
2524
wdenkb02744a2003-04-05 00:53:31 +00002525* Patch by Arun Dharankar, 4 Apr 2003:
2526 Add IDMA example code (tested on 8260 only)
2527
2528* Add support for Purple Board (MIPS64 5Kc)
2529
2530* Add support for MIPS64 5Kc CPUs
2531
2532* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
2533
2534* Patch by Denis Peter, 04 Apr 2003:
2535 - update MIP405-4 board
2536
stroese2606cf12003-04-04 16:55:30 +00002537* Patch by Stefan Roese, 4 Apr 2003:
2538 - U-Boot version environment variable "ver" added
2539 (CONFIG_VERSION_VARIABLE).
2540 - Changed PPC405GPr version from A to B.
2541 - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
2542
wdenkb02744a2003-04-05 00:53:31 +00002543* Patches by Denis Peter, 03 April 2003:
2544 - fix PCI IRQs on MPL boards
2545 - fix two more un-relocated pointer problems
2546
2547* Fix behaviour of "run" command:
2548 - print error message iv variable does not exist
2549 - terminate processing of arguments in case of error
2550
2551* Patches by Peter Figuli, 10 Mar 2003
2552 - Add support for BTUART on PXA platform
2553 - Add support for WEP EP250 (PXA) board
2554
2555* Fix flash problems on INCA-IP; add tool to allow bruning images to
2556 flash using a BDI2000
2557
2558* Implement fix for I2C Edge Conditions problem for all boards that
2559 use the bit-banging driver (common/soft_i2c.c)
2560
wdenk359733b2003-03-31 17:27:09 +00002561* Patch by Martin Winistoerfer, 23 Mar 2003
2562 - Add port to MPC555/556 microcontrollers
2563 - Add support for cmi customer board with
2564 Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
2565
2566* Patch by Rick Bronson, 28 Mar 2003:
2567 - fix common/cmd_nand.c
2568
wdenk8dba0502003-03-31 16:34:49 +00002569* Patch by Arun Dharankar, 24 Mar 2003:
2570 - add threads / scheduler example code
2571
2572* Add patches by Robert Schwebel, 31 Mar 2003:
2573 - add ctrl-c support for kermit download
2574 - align bdinfo output on ARM
wdenkb02744a2003-04-05 00:53:31 +00002575 - csb226 board: bring in sync with innokom/memsetup.S
2576 - csb226 board: fix MDREFR handling
2577 - misc doc fixes / extensions
2578 - innokom board: cleanup, MDREFR fix in memsetup.S, config update
2579 - add BOOT_PROGRESS to armlinux.c
wdenk8dba0502003-03-31 16:34:49 +00002580
stroese2606cf12003-04-04 16:55:30 +00002581* Add CPU ID, version, and clock speed for INCA-IP
wdenk8dba0502003-03-31 16:34:49 +00002582
wdenk5840af22003-03-28 14:40:36 +00002583* Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
2584 - fix SRAM and SDRAM memory sizing
2585 - add status LED support
2586 - add MAC address for second (SCC1) ethernet port
2587
2588* Update default environment for TQM8260 board
2589
wdenkc8434db2003-03-26 06:55:25 +00002590* Patch by Rick Bronson, 16 Mar 2003:
wdenkbb1b8262003-03-27 12:09:35 +00002591 - Add NAND flash support for reading, writing, and erasing NAND
2592 flash (certain forms of which are called SmartMedia).
2593 - Add support for Atmel AT91RM9200DK ARM920T based development kit.
wdenkc8434db2003-03-26 06:55:25 +00002594
2595* Patches by Robert Schwebel, 19 Mar 2003:
2596 - use arm-linux-gcc as default compiler for ARM
2597 - fix i2c fixup code
2598 - fix missing baudrate setting
2599 - added $loadaddr / CFG_LOAD_ADDR support to loadb
2600 - moved "ignoring trailing characters" _before_ u-boot wants to
2601 print out diagnostics messages; removes bogus characters at the
2602 end of transmission
2603
2604* Patch by John Zhan, 18 Mar 2003:
2605 Add support for SinoVee Microsystems SC8xx boards
2606
2607* Patch by Rolf Offermanns, 21 Mar 2003:
2608 ported the dnp1110 related changes from the current armboot cvs to
2609 current u-boot cvs. smc91111 does not work. problem marked in
2610 smc91111.c, grep for "FIXME".
2611
2612* Patch by Brian Auld, 25 Mar 2003:
2613 Add support for STM flash chips on ebony board
2614
wdenk28536032003-03-25 16:50:56 +00002615* Add PCI support for MPC8250 Boards (PM825 module)
2616
stroesea95be4d2003-03-25 14:44:48 +00002617* Patch by Stefan Roese, 25 Mar 2003:
2618 - PCI405 update.
2619
stroesef2afa912003-03-20 15:32:59 +00002620* Patch by Stefan Roese, 20 Mar 2003:
2621 - CPCI4052 update (support for revision 3).
2622 - Set edge conditioning circuitry on PPC405GPr for compatibility
2623 to existing PPC405GP designs.
2624 - Clip udiv to 5 bits on PPC405 (serial.c).
2625
wdenkbb1b8262003-03-27 12:09:35 +00002626* Extend INCAIP board support:
2627 - add automatic RAM size detection
2628 - add "bdinfo" command
2629 - pass flash address and size to Linux kernel
2630 - switch to 150 MHz clock
2631
wdenk6b58f332003-03-14 20:47:52 +00002632* Avoid flicker on the TRAB's VFD by synchronizing the enable with
2633 the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
2634 boards, version 153 for Rev. 200 boards).
2635
2636* Patch by Vladimir Gurevich, 12 Mar 2003:
2637 Fix relocation problem of statically initialized string pointers
2638 in common/cmd_pci.c
2639
2640* Patch by Kai-Uwe Blöm, 12 Mar 2003:
2641 Cleanup & bug fixes for JFFS2 code:
2642 - the memory mangement was broken. It caused havoc on malloc by
2643 writing beyond the block boundaries.
2644 - the length calculation for files was wrong, sometimes resulting
2645 in short file reads.
2646 - data copying now optionally takes fragment version numbers into
2647 account, to avoid copying from older data.
2648 See doc/README.JFFS2 for details.
2649
wdenkef5fe752003-03-12 10:41:04 +00002650* Patch by Josef Wagner, 12 Mar 2003:
2651 - 16/32 MB and 50/80 MHz support with auto-detection for IP860
2652 - ETH05 and BEDBUG support for CU824
2653 - added support for MicroSys CPC45
2654 - new BOOTROM/FLASH0 and DOC base for PM826
2655
2656* Patch by Robert Schwebel, 12 Mar 2003:
2657 Fix the chpart command on innokom board
2658
2659* Name cleanup:
2660 mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
2661 s/PPCBoot/U-Boot/ in some files
2662 s/pImage/uImage/ in some files
2663
2664* Patch by Detlev Zundel, 15 Jan 2003:
2665 Fix '' command line quoting
2666
2667* Patch by The LEOX team, 19 Jan 2003:
2668 - add support for the ELPT860 board
2669 - add support for Dallas ds164x RTC
2670
wdenk1fe2c702003-03-06 21:55:29 +00002671* Patches by David Müller, 31 Jan 2003:
2672 - minimal setup for CardBus bridges
2673 - add EEPROM read/write support in the CS8900 driver
2674 - add support for the builtin I2C controller in the Samsung s3c24x0 chips
wdenkef5fe752003-03-12 10:41:04 +00002675 - add support for MPL's VCMA9 (Samsung s3c2410 based) board
wdenk1fe2c702003-03-06 21:55:29 +00002676
2677* Patch by Steven Scholz, 04 Feb 2003:
2678 add support for RTC DS1307
2679
2680* Patch by Reinhard Meyer, 5 Feb 2003:
2681 fix PLPRCR/SCCR init sequence on 8xx to allow for
2682 changes of EBDF by software
2683
2684* Patch by Vladimir Gurevich, 07 Feb 2003:
2685 "API-compatibility patch" for 4xx I2C driver
2686
2687* TRAB fixes / extensions:
2688 - Restore VFD brightness as saved in environment
wdenkd155afb2003-06-18 20:22:24 +00002689 - add support for Fujitsu flashes
wdenk1fe2c702003-03-06 21:55:29 +00002690 - make sure both buzzers are turned off (drive low level)
2691
wdenkcc1e2562003-03-06 13:39:27 +00002692* Patches by Robert Schwebel, 06 Mar 2003:
2693 - fix bug in BOOTP code (must use NetCopyIP)
2694 - update of CSB226 port
2695 - clear BSS segment on XScale
2696 - added support for i2c_init_board() function
2697 - update to the Innokom plattform
2698
2699* Extend support for redundand environments for configurations where
2700 environment size < sector size
2701
wdenkb666c8f2003-03-06 00:58:30 +00002702* Patch by Rune Torgersen, 13 Feb 2003:
2703 Add support for Motorola MPC8266ADS board
2704
2705* Patch by Kyle Harris, 19 Feb 2003:
2706 patches for the Intel lubbock board:
2707 memsetup.S - general cleanup (based on Robert's csb226 code)
2708 flash.c - overhaul, actually works now
2709 lubbock.c - fix init funcs to return proper value
2710
2711* Patch by Kenneth Johansson, 26 Feb 2003:
stroesef2afa912003-03-20 15:32:59 +00002712 - Fixed off by one in RFTA calculation.
wdenkb666c8f2003-03-06 00:58:30 +00002713 - No need to abort when LDF is lower than we can program it's only
stroesef2afa912003-03-20 15:32:59 +00002714 minimum timing so clamp it to what we can do.
wdenkb666c8f2003-03-06 00:58:30 +00002715 - Takes function pointer to function for reading the spd_nvram. Usefull
2716 for faking data or hardcode a module without the nvram.
2717 - fix other user for above change
2718 - fix some comments.
2719
2720* Patches by Brian Waite, 26 Feb 2003:
2721 - fix port for evb64260 board
2722 - fix PCI for evb64260 board
2723 - fix PCI scan
2724
2725* Patch by Reinhard Meyer, 1 Mar 2003:
2726 Add support for EMK TOP860 Module
2727
2728* Patch by Yuli Barcohen, 02 Mar 2003:
2729 Add SPD EEPROM support for MPC8260ADS board
2730
wdenk4a5c8a72003-03-06 00:02:04 +00002731* Patch by Robert Schwebel, 21 Jan 2003:
2732 - Add support for Innokom board
2733 - Don't complain if "install" fails
2734 - README cleanup (remove duplicated lines)
2735 - Update PXA header files
2736
2737* Add documentation for existing POST code (doc/README.POST)
2738
2739* Patch by Laudney Ren, 15 Jan 2003:
2740 Fix handling of redundand environment in "tools/envcrc.c"
2741
2742* Patch by Detlev Zundel, 28 Feb 2003:
2743 Add bedbug support for 824x systems
2744
2745* Add support for 16 MB flash configuration of TRAB board
2746
2747* Patch by Erwin Rol, 27 Feb 2003:
2748 Add support for RTEMS
2749
2750* Add image information to README
2751
stroesefd4b5a72003-02-18 11:30:24 +00002752* Patch by Stefan Roese, 18 Feb 2003:
2753 CPCIISER4 configuration updated.
2754
stroese85d0fec2003-02-17 16:06:06 +00002755* Patch by Stefan Roese, 17 Feb 2003:
2756 Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
2757
stroesef5dd4102003-02-14 11:21:23 +00002758* Patch by Stefan Roese, 13 Feb 2003:
2759 Add "pcidelay" environment variable (in ms, enabled via
2760 CONFIG_PCI_BOOTDELAY).
2761 PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
2762 RST# to respond to configuration cycles (33MHz -> 1s).
2763
wdenk4a5c8a72003-03-06 00:02:04 +00002764* Fix dual PCMCIA slot support (when running with just one
2765 slot populated)
2766
2767* Add VFD type detection to trab board
2768
2769* extend drivers/cs8900.c driver to synchronize ethaddr environment
2770 variable with value in the EEPROM
2771
stroese91ee5282003-02-10 16:39:00 +00002772* Patch by Stefan Roese, 10 Feb 2003:
2773 Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
2774
wdenkbb1b8262003-03-27 12:09:35 +00002775* Add support for MIPS32 4Kc CPUs
2776
2777* Add support for INCA-IP Board
2778
wdenk4a5c8a72003-03-06 00:02:04 +00002779======================================================================
2780Changes for U-Boot 0.2.2:
2781======================================================================
2782
wdenkeda42082003-01-17 16:27:01 +00002783* Add dual ethernet support on PM826
2784
2785* Add support for LXT971 PHY on PM826
2786
2787* Patch by Tord Andersson, 16 Jan 2003:
2788 Fix flash sector count for TQM8xxL
2789
2790* Fix I2C EEPROM problem on ICU862 board (would only write the first
2791 16 bytes out of each 32 byte block)
2792
2793======================================================================
2794Changes for U-Boot 0.2.1:
wdenk2f87a3f2002-12-20 23:42:25 +00002795======================================================================
2796
wdenk2dad91b2003-01-13 23:54:46 +00002797* Add support for V37 board
2798 (patch by Jón Benediktsson, 11 Dec 2002)
2799
wdenke7f34c62003-01-11 09:48:40 +00002800* Update baudrate in bd_info when it gets changed
2801
2802* Add watchdog trigger points while waiting for serial port
2803 (so far only 8xx -- needed on LWMON with 100ms watchdog)
2804
2805* Improve command line tool to access the U-Boot's environment
2806 (figuration of the utility, using a config file)
2807
wdenk654868c2003-01-02 23:57:29 +00002808* Add single quote support for (old) command line parser
2809
wdenk2f87a3f2002-12-20 23:42:25 +00002810* Switch LWMON board default config from FRAM to EEPROM;
2811 in POST, EEPROM shows up on 8 addresses
2812
2813======================================================================
wdenka08708c2002-12-17 18:07:30 +00002814Changes for U-Boot 0.2.0:
wdenk24ee89b2002-11-03 17:56:27 +00002815======================================================================
2816
wdenk34b613e2002-12-17 01:51:00 +00002817* Use 1-byte-read instead of -write for iprobe() function
2818 Add i2c commands to PM826 config
2819
2820* extend I2C POST code: check for list on known addresses
2821
wdenk9dfa8d12002-12-08 09:53:23 +00002822* Improve log buffer code; use "loglevel" to decide which messages
2823 to log on the console, too (like in Linux); get rid of "logstart"
2824
2825* Add command line tool to access the U-Boot's environment
2826 (board-specific for TRAB now, to be fixed later)
2827
wdenkbb444c92002-12-07 00:20:59 +00002828* Patch by Hans-Joerg Frieden, 06 Dec 2002
2829 Fix misc problems with AmigaOne support
2830
2831* Patch by Chris Hallinan, 3 Dec 2002:
2832 minor cleanup to the MPC8245 EPIC driver
2833
2834* Patch by Pierre Aubert , 28 Nov 2002
2835 Add support for external (SIU) interrupts on MPC8xx
2836
2837* Patch by Pierre Aubert , 28 Nov 2002
2838 Fix nested syscalls bug in standalone applications
2839
2840* Patch by David Müller, 27 Nov 2002:
2841 fix output of "pciinfo" command for CardBus bridge devices.
2842
2843* Fix bug in TQM8260 board detection - boards got stuck when board ID
2844 was not readable
2845
wdenk90e7e422002-12-04 23:39:58 +00002846* Add LED indication for IDE activity on KUP4K board
2847
wdenk9dd2b882002-12-03 21:28:10 +00002848* Fix startup problems with VFD display on TRAB
2849
2850* Patch by Pierre Aubert, 20 Nov 2002
2851 Add driver for Epson SED13806 graphic controller.
2852 Add support for BMP logos in cfb_console driver.
2853
wdenk2029f4d2002-11-21 23:11:29 +00002854* Added support for both PCMCIA slots (at the same time!) on MPC8xx
2855
2856* Patch by Rod Boyce, 21 Nov 2002:
2857 fix PCMCIA on MBX8xx board
2858
2859* Patch by Pierre Aubert , 21 Nov 2002
2860 Add CFG_CPM_POST_WORD_ADDR to make the offset of the
2861 bootmode word in DPRAM configurable
2862
wdenk67ff36c2002-11-19 23:01:07 +00002863* Patch by Daniel Engström, 18 Nov 2002:
2864 Fixes for x86 port (mostly strings issues)
2865
2866* Patch by Ken Chou, 18 Nov 2002:
2867 Fix for natsemi NIC cards (DP83815)
2868
2869* Patch by Pierre Aubert, 19 Nov 2002:
2870 fix a bug for the MII configuration, and some warnings
2871
wdenk452cfd62002-11-19 11:04:11 +00002872* Patch by Thomas Frieden, 13 Nov 2002:
2873 Add code for AmigaOne board
2874 (preliminary merge to U-Boot, still WIP)
2875
2876* Patch by Jon Diekema, 12 Nov 2002:
2877 - Adding URL for IEEE OUI lookup
2878 - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
2879 being defined.
2880 - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
2881 root-on-nfs macros are designed to switch how the default boot
2882 method gets defined.
2883
wdenk591dda52002-11-18 00:14:45 +00002884* Patch by Daniel Engström, 13 Nov 2002:
2885 Add support for i386 architecture and AMD SC520 board
2886
2887* Patch by Pierre Aubert, 12 Nov 2002:
2888 Add support for DOS filesystem and booting from DOS floppy disk
2889
wdenk2582f6b2002-11-11 21:14:20 +00002890* Patch by Jim Sandoz, 07 Nov 2002:
2891 Increase number of network RX buffers (PKTBUFSRX in
2892 "include/net.h") for EEPRO100 based boards (especially SP8240)
2893 which showed "Receiver is not ready" errors when U-Boot was
2894 processing the receive buffers slower than the network controller
2895 was filling them.
2896
wdenkc217f6d2002-11-11 02:11:37 +00002897* Patch by Andreas Oberritter, 09 Nov 2002:
2898 Change behaviour of NetLoop(): return -1 for errors, filesize
2899 otherwise; return code 0 is valid an means no file loaded - in this
2900 case the environment still gets updated!
2901
2902* Patches by Jon Diekema, 9 Nov 2002:
2903 - improve ADC/DAC clocking on the SACSng board to align
2904 the failing edges of LRCLK and SCLK
2905 - sbc8260 configuration tweaks
2906 - add status LED support for 82xx systems
2907 - wire sspi/sspo commands into command handler; improved error
2908 handlering
2909 - add timestamp support and alternate memory test to the
2910 SACSng configuration
2911
2912* Patch by Vince Husovsky, 7 Nov 2002:
wdenk1272e232002-11-10 22:06:23 +00002913 Add "-n" to linker options to get rid of "Not enough room for
2914 program headers" problem
2915
2916* Patch by David Müller, 05 Nov 2002
2917 Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
2918 so we can use an already existing name
2919
2920* Patch by Pierre Aubert, 05 Nov 2002
2921 Hardware relatied improvments in FDC boot code
2922
2923* Patch by Holger Schurig, 5 Nov 2002:
2924 Make the PXA really change it's frequency
2925
2926* Patch by Pierre Aubert, 05 Nov 2002
2927 Add support for slave serial Spartan 2 FPGAs
2928
2929* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
2930 drivers
2931
wdenk56f94be2002-11-05 16:35:14 +00002932* Add support for log buffer which can be passed to Linux kernel's
2933 syslog mechanism; used especially for POST results.
2934
2935* Patch by Klaus Heydeck, 31 Oct 2002:
2936 Add initial support for kup4k board
2937
wdenk384ae022002-11-05 00:17:55 +00002938* Patch by Robert Schwebel, 04 Nov 2002:
2939 - use watchdog to reset PXA250 systems
2940 - added progress callbacks to (some of the) ARM code
2941 - update for Cogent CSB226 board
2942
2943* Add support for FPS860 board
2944
wdenke95b61c2002-11-04 16:02:40 +00002945* Patch by Guillaume Alexandre,, 04 Nov 2002:
2946 Improve PCI access on 32-bits Compact PCI bus
2947
wdenk24ee89b2002-11-03 17:56:27 +00002948* Fix mdelay() on TRAB - this was still the debugging version with
2949 seconds instead of ms.
2950
2951* Patch by Robert Schwebel, 1 Nov 2002:
2952 XScale related cleanup (affects all ARM boards)
2953
2954* Cleanup of names and README.
wdenkcc1c8a12002-11-02 22:58:18 +00002955
2956======================================================================
wdenk24ee89b2002-11-03 17:56:27 +00002957Notes for U-Boot 0.1.0:
wdenkcc1c8a12002-11-02 22:58:18 +00002958======================================================================
2959
2960This is the initial version of "Das U-Boot", the Universal Boot Loader.
2961
2962It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
2963For information about the history of the project please see the
2964PPCBoot project page at http://sourceforge.net/projects/ppcboot
2965
2966======================================================================