blob: 66994b8bae5af94546997a5c51a5c7831cdea8cc [file] [log] [blame]
wdenk24ee89b2002-11-03 17:56:27 +00001======================================================================
Stefan Roese5ff4c3f2005-08-15 12:31:23 +02002Changes for U-Boot 1.1.4:
3======================================================================
4
Wolfgang Denk56811f62005-10-09 01:04:33 +02005* Add support for AP1000 board.
6 Patch by James MacAulay, 07 Oct 2005
7
Wolfgang Denkfbb97cc2005-10-09 00:33:37 +02008* Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
9 Patch by Anders Larsen, 07 Oct 2005
10
11 The Atmel errata #11 states that the transfer buffer descriptor
12 table must be aligned on a 16-word boundary. As it turned out, this
13 is insufficient - it seems the table must be aligned on a boundary
14 at least as large as the table itself (in Linux this is not an
15 issue - the table is aligned on a PAGE_SIZE (4096) boundary).
16
Wolfgang Denk23f0d172005-10-09 00:25:58 +020017* Fixed compilation for ARM when using a (standard) hard-FP toolchain
18 Patch by Anders Larsen, 07 Oct 2005
19
Wolfgang Denk88bd7432005-10-09 00:22:48 +020020* Cleanup warnings for cpu/arm720t & cpu/arm1136 files.
21 sed the linker scripts, rather than pre-process them.
22 Patch by Peter Pearse, 07 Oct 2005
23
Wolfgang Denk7f88a5e2005-10-06 17:08:18 +020024* Update make target for ARM supported boards.
25 Use lowlevel_init() instead of platformsetup() [rename].
26 Patch by Peter Pearse, 06 Oct 2005
27
Wolfgang Denk63e44ff2005-10-06 01:50:50 +020028* Fix booting from serial dataflash on AT91RM9200
29 Patch by Peter Menzebach, 29 Aug 2005
30
Wolfgang Denkd1afd912005-10-06 01:46:57 +020031* Add JFFS2 support for TRAB board
32 Patch by Martin Krause, 25 Aug 2005
33
Wolfgang Denkd2da2872005-10-06 01:43:39 +020034* Remove unnecessary dependency of netconsole on CONFIG_NET_MULTI
35 Patch by Marcus Hall, 24 Aug 2005
36
Wolfgang Denk463432f2005-10-06 01:26:16 +020037* Fix the machine-id of the Cogent csb637 board
38 Patch by Anders Larsen, 05 Oct 2005
39
Wolfgang Denk9a9f2472005-10-06 01:22:22 +020040* Complete support for the KwikByte KB920x boards
41 Patch by Anders Larsen, 05 Oct 2005
42
Wolfgang Denk1d281202005-10-05 02:06:08 +020043* Set the AT91RM9200 clock to asynchronous mode
44 Patch by Anders Larsen, 03 May 2005
45
Wolfgang Denk7aea95a2005-10-05 02:02:25 +020046* Set the AT91RM9200 clock to synchronous mode
47 Patch by Anders Larsen, 29 Apr 2005
48
Wolfgang Denke35470b2005-10-05 02:00:09 +020049* Add support for Cogent csb637
50 Patch by Anders Larsen, 29 Apr 2005
51
Wolfgang Denkcf25b452005-10-05 01:54:04 +020052* Fix dm9161.c initialization
53 Patch by Anders Larsen, 29 Apr 2005
54
Wolfgang Denkbc650fa2005-10-05 01:51:29 +020055* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
56 (8e2be51de8dd03c1ce4d06cbb18ad06133d47cd5)
57
58* Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
59 Patch by Anders Larsen, 29 Apr 2005
60
Wolfgang Denk6f3b1cd2005-10-05 00:25:17 +020061* Fix device partition intialization for SystemACE disks.
62 Patch by Stephen Williams, 28 Apr 2005
63
Wolfgang Denk9da240c2005-10-05 00:19:34 +020064* Added support for KwikByte KB920x boards (based on AT91RM9200)
65 Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
66
Wolfgang Denk79fd8e92005-10-05 00:03:55 +020067* Add support for S29GL064M-R3 flash chip on xsengine board
68 Patch by Kurt Stremerch, 18 Apr 2005
69
Wolfgang Denk29dcbd42005-10-05 00:00:54 +020070* E500 update: repoint IVPR to RAM when code is relocated
71 Patch by Kylo Ginsberg, 13 Apr 2005
72
Wolfgang Denkdf70a422005-10-04 23:38:07 +020073* Fix loop end test in lib_generic/string.c:strswab()
74 Patch by Andrew Dyer, October 10, 2005
75 Signed-off-by: Andrew Dyer <amdyer@gmail.com>
76
Wolfgang Denk03f9ba32005-10-04 23:10:28 +020077* Cleanup
78
79* Update ARM Integrator boards:
80 Correct addessing errors in platform files.
81 Split off common core module data from Integrator header files to
82 include/armcoremodule.h.
83 Patch by Peter Pearse, 04 Oct 2005
84
Wolfgang Denkaba58092005-10-04 22:38:24 +020085* Make sure only supported compiler options are used
86 Import "cc-option" shell function from kernel and
87 use it to get the correct ARM GCC options for individual CPUs
88 Patch by Peter Pearse, 30 Jun 2005
89
Stefan Roese95258d52005-10-04 15:00:30 +020090* Fix 440GR to print correct cpu revision
Wolfgang Denk03f9ba32005-10-04 23:10:28 +020091 Patch by Stefan Roese, 04 Oct 2005
Stefan Roese95258d52005-10-04 15:00:30 +020092
Stefan Roese5b9ab142005-10-03 15:27:50 +020093* Change board message on AMCC Yosemite & Yellowstone to common style
Wolfgang Denk03f9ba32005-10-04 23:10:28 +020094 Patch by Stefan Roese, 03 Oct 2005
Stefan Roese5b9ab142005-10-03 15:27:50 +020095
Wolfgang Denkb0723792005-09-30 15:18:23 +020096* Fix compiler warning
97
Wolfgang Denk61d85622005-09-29 12:16:38 +020098* Fix FEC PHY addresses for TQM85xx boards
99
Wolfgang Denk00b67fd2005-09-28 01:49:47 +0200100* Fix uninitialized variable problem in hush shell
101 Patch by Lars Rostock, 26 Sep 2005
102
Wolfgang Denk2734f8a2005-09-26 23:40:37 +0200103* Undo change of f6e20fc6ca... to include/configs/trab.h
104 (Must have been an accident?)
105
Wolfgang Denk8a6820a2005-09-26 01:26:56 +0200106* Add support for AT91RM9200 OHCI Controller.
107 Patch by Eric Benard, 07 Apr 2005
108
Wolfgang Denkb97b4c62005-09-26 01:18:22 +0200109* Update ARM mach-types.h
110 Patch by Eric Benard, 07 Apr 2005
111
Wolfgang Denk756bfd72005-09-26 01:14:38 +0200112* Add support for MP2USB board.
113 Patch by Eric Benard, 07 Apr 2005
114
Wolfgang Denk4dc11462005-09-26 01:06:33 +0200115* Add board support for armadillo HT1070
116 Patch by Rowel Atienza, 06 Apr 2005
117
Wolfgang Denke0ae0912005-09-26 00:53:02 +0200118* Second Ethernet address enabled for MPC885ADS and MPC8272ADS.
119 Patch by Vitaly Bordug, 30 Mar 2005
120
Wolfgang Denkcba3feb2005-09-26 00:44:15 +0200121* Add iopset command on mpc8xx
122 Patch by Daniel Eisenhut, 25 Mar 2005
123
Wolfgang Denkb8d1f512005-09-26 00:39:59 +0200124* Add support for MII in eepro100 driver.
125 Patch by Gleb Natapov, 21 Mar 2005
126
Wolfgang Denka03f16f2005-09-26 00:29:53 +0200127* Fixes to the Lubbock (PXA 25x) support:
128 - Resolve the FIXME with respect to saving the u-boot environment.
129 - Make the default load address land in real memory.
130 - Fix lan91c96 SMC_{in,out}{b,w,l}() macros
131 Patch by David Brownell, 10 Mar 2005
132
Wolfgang Denka48c7252005-09-25 18:59:36 +0200133* Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
134 Patch by Marc Leeman, 04 Mar 2005
135
Wolfgang Denke1e46792005-09-25 18:41:04 +0200136* OMAP242x H4 board update
137 - fix for ES2 differences.
138 - switch to using the cfi_flash driver.
139 - fix SRAM build address.
140 - fix for GP device operation.
141 - unlock SRAM for GP devices.
142 - display more device information.
143 - fix potential deadlock in omap24xx_i2c driver.
144 - fix DLL load values to match dpllout*1 operation.
145 - fix 2nd chip select init for combo DDR device.
146 - add support for CFI Intel 28F256L18 on H4 board.
147 Patch by Richard Woodruff, 03 Mar 2005
148
Wolfgang Denk712fb8e2005-09-25 17:14:20 +0200149* Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h
150 Patch by Steven Scholz, 02 Mar 2005
151
Wolfgang Denkb6ea6302005-09-25 17:05:57 +0200152* Fix typo in eth.c
153 Patch by Ara Avanesyan, 24 Feb 2005
154
Wolfgang Denk64934202005-09-25 17:02:27 +0200155* Remove unneeded #include <malloc.h>
156 Patch by Ladislav Michl, 22 Feb 2005
157
Wolfgang Denkf90377e2005-09-25 16:59:36 +0200158* Add cramfs support for m68k
159 Patch by Zachary Landau, 21 Feb 2005
160
Wolfgang Denk42ae5672005-09-25 16:56:15 +0200161* Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
Wolfgang Denk34ca9d32005-09-25 18:49:35 +0200162 Patch by Jeff Angielski, 21 Feb 2005
163
Wolfgang Denk017bc0d2005-09-25 16:50:33 +0200164* Fix au1x00_serial baud rate calculation:
165 remove hardcoded cpu clock divisor and use register instead;
166 round up instead of truncate
167 Patch by Andrew Dyer, 15 Feb 2005
168
Wolfgang Denkc38e70c2005-09-25 16:44:21 +0200169* Add Xilinx Spartan3 family FPGA support
Wolfgang Denk017bc0d2005-09-25 16:50:33 +0200170 Patch by Kurt Stremerch, 14 Feb 2005
Wolfgang Denkc38e70c2005-09-25 16:44:21 +0200171
Wolfgang Denka205a8f2005-09-25 16:41:22 +0200172* Fix drivers/cfi_flash.c: use info->reset_cmd instead of FLASH_CMD_RESET
173 Patch by Zachary Landau, 11 Feb 2005
174
Wolfgang Denkb9c93d22005-09-25 16:31:16 +0200175* Fix VOH405 Support
176 Patch by Matthias Fuchs, 25 Sep 2005
177
Wolfgang Denk8cc89d92005-09-25 16:27:55 +0200178* Added support for PCI bridge on MPC8272ADS
179 Patch by Vitaly Bordug, Feb 09 2005
180
Wolfgang Denk5d6879c2005-09-25 16:22:14 +0200181* Update multicore CM9XX support for Integrator AP to allow booting from flash
182 Patch by Jean-Paul Saman, 8 Feb 2005
183
Wolfgang Denkc7ca7cf2005-09-25 16:15:17 +0200184* Fix strswab() to reliably find end of string
185 Patch by Andrew Dyer, 08 Feb 2005
186
Wolfgang Denkff4b91f2005-09-25 16:01:42 +0200187* Fix typos in include/ppc440.h
188 Patch by Andrew E Mileski, 04 Feb 2005
189
Wolfgang Denk70de6132005-09-25 15:57:49 +0200190* Add Vibren (was Accelent) PXA255 IDP Support
191 Patch by Cliff Brake, 04 Feb 2005
192
Wolfgang Denk375a89f2005-09-25 15:39:00 +0200193* Fix tools/bmp_logo.c using incorrect offset to pixel data
194 Patch by Andrew Dyer, 31 Jan 2005
195
Wolfgang Denkadf20a12005-09-25 01:48:28 +0200196* Add ARM946E cpu and core module targets; remap memory to 0x00000000
197 Patch by Peter Pearse, 2 Feb 2005
198
Wolfgang Denk8e6213c2005-09-25 01:20:38 +0200199* Fix error handling in tools/env/fw_env.c
200 Patch by Ara Avanesyan, 01 Feb 2005
201
Wolfgang Denk42a14192005-09-25 01:09:58 +0200202* Fix MGT5100 PSC baudrate calculation
203 Patch by Sebastian Schau, 27 Jan 2005
204
Wolfgang Denkb4567f22005-09-25 00:59:24 +0200205* OMAP242x fix for GP device booting
206 - Add SRAM unlock for GP devices.
207 - Change DDR DLL unlock value to allow DPLLout*1 operation.
208 Patches by Richard Woodruff, 21 Jan 2005:
209
Wolfgang Denk0cbaf642005-09-25 00:53:22 +0200210* Add support for AMD's Pb1x00 eval board;
211 add MII routines to the au1x00 ethernet driver;
212 add USB ohci driver (work in progress)
213 Patch by Thomas Sailer, 20 Jan 2005
214
Wolfgang Denkd3abe5a2005-09-25 00:23:05 +0200215* Update omap5912osk board
216 Use drivers/cfi_flash.c instead of private flash driver;
217 Remove hardcoded personalized settings from omap5912osk.h;
218 Fix spacing with (RO) marks in 'flinfo' output.
219 Patch by Michael Bendzick, 14 Jan 2005
220
Wolfgang Denka37cb302005-09-25 00:00:45 +0200221* Fix warnings for PCI code on ixp
222 Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
223
Wolfgang Denkffb77562005-09-24 23:41:00 +0200224* virtex2 fix for bogus download error messages
225 The virtex2 FPGA download code watches for init going active during
226 a download of config data as an error condition. init also goes
227 active after a configuration is finished in concert with the done
228 signal. So far, the code does not check for done active until all
229 of the configuration data is sent. If configuration data has a few
230 extra pad bytes at the end, this would cause an error message even
231 though the download had suceeded.
232 NOTE: virtex2 slave serial and spartan2 versions may still have the
233 same problem.
234 Patch by Andrew Dyer, 12 Jan 2005
235
Wolfgang Denk07bdb022005-09-24 23:32:48 +0200236* Optimize flash_make_cmd in drivers/cfi_flash.c for little endian
237 Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode"
238 message when probing for nonexistent flash in little endian mode.
239 As a side effect more efficient and smaller code is generated,
240 which is always a Good Thing (TM).
241 Patch by Ladislav Michl, 24 Sep 2005
242
Wolfgang Denk227b5192005-09-24 23:25:46 +0200243* Update for TFTP using a fixed UDP port
244 Use the approved environment variable names. Added "tftpdstp" to
245 allow ports other than 69 per Tolunay Orkun's recommendation.
246 Patch by Jerry Van Baren, 12 Jan 2005
247
Wolfgang Denke3cfce52005-09-24 22:37:32 +0200248* Allow to force TFTP to use a fixed UDP port
249 (Add a configuration option CONFIG_TFTP_PORT and optional env
250 variable tftpport)
251 Patch by Jerry Van Baren, 10 Jan 2005
252
Wolfgang Denkaa9d1522005-09-24 22:05:40 +0200253* Fix ethernet timeouts on dbau1550 and other au1x00 systems
254 Patch by Leif Lindholm, 29 Dec 2004
255
Wolfgang Denkedb65482005-09-24 21:54:50 +0200256* Cleanup: fix broken builds
257
258* Fix PHY address argument passing with mii info command
259 Patch by Andrew Dyer, 28 Dec 2004
260
Wolfgang Denk0ee70772005-09-23 11:05:55 +0200261* Cleanup (PPC4xx is AMCC now)
262
Stefan Roesea34997d2005-09-22 09:16:57 +0200263* esd CPCI2DP board added
264 Patch by Matthias Fuchs, 22 Sep 2005
265
Stefan Roese031dc5c2005-09-22 09:07:15 +0200266* esd PMC405 board updated
267 Patch by Matthias Fuchs, 22 Sep 2005
268
Stefan Roesed9d97742005-09-22 09:04:17 +0200269* Add SM501 support to HH405 board.
270 Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
271 Add support for eeprom write-enable (CFG_EEPROM_WREN).
272 Patch by Stefan Roese, 22 Sep 2005
273
Wolfgang Denkcecb6c72005-09-22 09:34:17 +0200274* Fix autonegotiation in tsec ethernet driver
275 Patch by Stefan Roese, 21 Sep 2005
276
Wolfgang Denk78b7b562005-09-21 15:31:25 +0200277* Fix bug in auto_update (trab board)
278 Patch by Martin Krause, 16 Sep 2005
279
Wolfgang Denkc4df5a42005-09-21 15:24:52 +0200280* Fix computation of framebuffer palette for 8bpp LCD bitmaps
281 Patch by Francesco Mandracci, 16 Sep 2005
282
Wolfgang Denkf67ef1e2005-09-21 10:07:56 +0200283* Update configuration for INKA4x0 board
284
Wolfgang Denk242cc932005-09-21 09:59:55 +0200285* Update configuration for PM854 board
286 Based on patch by R. Loeffl, 20 Jul 2005
287
Stefan Roesedc6472a2005-09-15 14:41:11 +0200288* Add PCI support to TQM8540 and TQM8560 boards
289 Patch by Stefan Roese, 15 Sep 2005
290
Stefan Roese27ea7a92005-09-15 11:34:07 +0200291* Update AMCC Yosemite to get a consistent setup for all AMCC eval
292 boards (baudrate, environment...). Flash driver fixed.
293 Patch by Stefan Roese, 15 Sep 2005
294
Stefan Roese74309032005-09-07 16:21:12 +0200295* Fix problem in 440GP ethernet driver (ebony). Add support for 2nd
296 ethernet port on ebony.
297 Patch by Stefan Roese, 7 Sep 2005
298
Marian Balakowiczfe1444a2005-09-11 15:27:12 +0200299* Added support for mtddevnum and mtddevname variables (mtdparts command)
300
Wolfgang Denk969542b2005-09-13 00:12:33 +0200301* Change default console baud rate for stxxtc board
302
Stefan Roeseac553282005-08-31 12:55:50 +0200303* Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
Stefan Roeseac553282005-08-31 12:55:50 +0200304 Patch by Stefan Roese, 31 Aug 2005
305
Wolfgang Denkd452a1e2005-09-03 02:22:41 +0200306* Fix default command set (don't include CFG_CMD_DISPLAY command)
307 Patch by Pantelis Antoniou, 02 Sep 2005
308
Wolfgang Denka836f2a2005-09-03 01:58:35 +0200309* Cleanup
310
Wolfgang Denkdfa35a22005-09-03 01:23:25 +0200311* Enable SM712 driver support for HMI1001 board.
312
Wolfgang Denke156d472005-08-31 12:30:09 +0200313* Fix problems with ld version 2.16 (dot outside sections problem)
314 Pointed out by Gerhard Jaeger, 31 Aug 2005;
315 cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
316
317* Prepare U-Boot for gcc-4.x: fix global data pointer initialization
318
319* Adjust CS3 timings on HMI1001 board for dot matrix display under Linux
320
321* Add keyboard and dot matrix display support for HMI1001 board.
322
323* Prepare U-Boot for gcc-4.x
324
Wolfgang Denk4dccdc22005-08-24 12:41:18 +0200325* Fixed Bamboo port to enable running without DDR-DIMM
326 (Bamboo has also 64MB onboard DDR)
Stefan Roese0da2de52005-08-24 11:21:36 +0200327 Patch by Stefan Roese, 24 Aug 2005
328
Wolfgang Denk8e4c71f2005-08-23 23:04:40 +0200329* Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
330 now handling all 4xx cpu's
331 Patch by Stefan Roese, 16 Aug 2005
332
Wolfgang Denke489c752005-08-23 22:29:44 +0200333* Fix make dependencies for at91rm9200 and ks8695 cpus
334 Patch by Steven Scholz, 23 Aug 2005
335
Wolfgang Denkcc1850e2005-08-23 22:27:41 +0200336* Add JFFS2 support for TQM5200 board
337
Stefan Roese99200d22005-08-22 17:51:53 +0200338* Add esd cpci5200 and pf5200 boards
339 Patch by Reinhard Arlt, 22 Aug 2005
340
Wolfgang Denkb6c85c42005-08-19 00:55:12 +0200341* Fix sysclock for TQM8540 and TQM8560 boards
342 Patch by Martin Krause, 25 Jul 2005
343
Wolfgang Denk9cf56102005-08-19 00:53:02 +0200344* Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2
345 Patch by Martin Krause, 08 Jun 2005
346
Wolfgang Denke4e5e4e2005-08-19 00:46:54 +0200347* Add new board specific commands for TQM5200/STK52XX
348 - Sound commands (beep, wav, sound)
349 - Test commands (led, can, backlight, rs232)
350 Patch by Martin Krause, 02 May 2005
351
352* Change main clock on CMC-PU2 board from 207 MHz to 179 MHz
Wolfgang Denk990ba892005-08-19 00:36:45 +0200353 because of a bug in the AT91RM9200 CPU PLL
354 Patch by Martin Krause, 22 Apr 2005
355
Wolfgang Denk6ba6bdc2005-08-19 00:08:55 +0200356* Add automatic HW detection for another CMC_PU2 variant
357 Patch by Martin Krause, 20 Apr 2005
358
Wolfgang Denk9226f2b2005-08-18 12:21:16 +0200359* Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration
360 Patch by Martin Krause, 19 Apr 2005
361
Wolfgang Denk71112152005-08-18 11:55:22 +0200362* Fix initialization problem on TQM5200 without SM501
Wolfgang Denk6ba6bdc2005-08-19 00:08:55 +0200363 Patch by Martin Krause, 08 Apr 2005
Wolfgang Denk71112152005-08-18 11:55:22 +0200364
Wolfgang Denk09f940b2005-08-18 11:51:12 +0200365* Add RTC support for STK52XX.200
Wolfgang Denk6ba6bdc2005-08-19 00:08:55 +0200366 Patch by Martin Krause, 07 Apr 2005
Wolfgang Denk09f940b2005-08-18 11:51:12 +0200367
Wolfgang Denk672f2e82005-08-18 01:22:22 +0200368* Add support for IFM o2dnt board
369
Wolfgang Denkc10023e2005-08-16 15:17:53 +0200370* Enable PCI on hmi1001 board
371
Wolfgang Denk79117cd2005-08-16 09:32:45 +0200372* Fix return values of the jffs2 commands ls/fsload/fsinfo,
373 so we can use them to, e.g., check the existence of a file with
374 "if ls foo; then this; else that; fi" in the hush shell
375 Patch by Andreas Engel, 16 August 2005
376
Wolfgang Denk85faa8b2005-08-15 16:03:56 +0200377* Coding style cleanup
378
Wolfgang Denk72fdb6c2005-08-15 15:55:00 +0200379* Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
380 Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
381
Stefan Roese5ff4c3f2005-08-15 12:31:23 +0200382* Check return value of malloc in 440gx_enet.c
383 Patch by Travis B. Sawyer, 18 Jul 2005
384
385* Add Sandburst Metrobox and Sandburst Karef board support packages.
386 Second serial port on 440GX now defined as a system device.
387 Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
388 Patch by Travis B. Sawyer, 12 Jul 2005
389
390======================================================================
wdenk26c58432005-01-09 17:12:27 +0000391Changes for U-Boot 1.1.3:
392======================================================================
393
Wolfgang Denk30b87322005-08-12 23:43:12 +0200394* Minor code cleanup
395
Wolfgang Denk532ba4a2005-08-12 23:36:08 +0200396* Add forgotten new fils from latest VoiceBlue update
397
Wolfgang Denk2b7976a2005-08-12 23:34:51 +0200398* Make bootretry feature work with hush shell.
399 Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
400 Patch by Andreas Engel, 19 Jul 2005
401
Wolfgang Denk804ecb12005-08-12 23:27:18 +0200402* Update Hymod Board Database PHP code in "tools" directory
403 Patch by Murray Jensen, 01 Jul 2005
404
Wolfgang Denkaf03f732005-08-12 23:23:46 +0200405* Make "tr" command use POSIX compliant; export HOSTOS make variable
406 Patch by Murray Jensen, 30 Jun 2005
407
Wolfgang Denk2c9dfca2005-08-12 23:20:59 +0200408* Fix Murray Jensen's mail address.
409 Patch by Murray Jensen, 30 Jun 2005
410
Wolfgang Denk8ff63c22005-08-12 23:15:53 +0200411* Preserve PHY_BMCR during a soft reset.
412 Patch by Carl Riechers, 24 Jun 2005
413
Wolfgang Denkdbb564b2005-08-12 22:56:51 +0200414* VoiceBlue update: eeprom tool can also store firmware version now.
415 eeprom.bin is runable by jumping at load address.
416 Patch by Ladislav Michl, 23 May 2005
417
Wolfgang Denk05178242005-08-12 22:38:37 +0200418* Move the AT91RM9200DK to the ARM Systems list.
419 Patch by Anders Larsen, 26 Apr 2005
Wolfgang Denk30b87322005-08-12 23:43:12 +0200420
Wolfgang Denke25f0522005-08-12 22:35:59 +0200421* Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3
422 Patch by Anders Larsen, 26 Apr 2005
423
Wolfgang Denkbb172092005-08-12 22:32:29 +0200424* measure_gclk() is needed when DEBUG is enabled
425 Patch by Bryan O'Donoghue, 25 Apr 2005
426
Stefan Roesedfced812005-08-12 20:06:52 +0200427* Add UPD-Checksum code, fix problem in net.c (return instead of break)
428 Patch by Reinhard Arlt, 12 Aug 2005
429
Stefan Roese1e8519f2005-08-12 16:56:56 +0200430* esd PCI405 board updated
431 Patch by Matthias Fuchs, 28 Jul 2005
432
Stefan Roese36d3bd02005-08-12 16:52:47 +0200433* esd WUH405 and DU405 board updated
434 Patch by Matthias Fuchs, 27 Jul 2005
435
Stefan Roesef9b85672005-08-12 16:46:35 +0200436* Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I)
437 Patch by Matthias Fuchs, 4 May 2005
438
Stefan Roese1d026382005-08-11 18:03:14 +0200439* Update AMCC Yosemite to get a consistent setup for all AMCC eval
440 boards (baudrate, environment...). Flash driver fixed.
441 Patch by Stefan Roese, 11 Aug 2005
442
Stefan Roese00f0d962005-08-11 17:58:40 +0200443* Changed AMCC Bubinga (405EP) configuration to support 2nd eth port
444 Patch by Stefan Roese, 11 Aug 2005
445
Stefan Roese797d8572005-08-11 17:56:56 +0200446* Add NAND FLASH support for AMCC Bamboo 440EP eval board
447 Patch by Stefan Roese, 11 Aug 2005
448
Wolfgang Denkeb95c852005-08-10 15:14:32 +0200449* Add configuration for IFM AEV FIFO board.
450 Minor coding style cleanup.
451
452* Add configuration for IFM SPI eval board
453
Wolfgang Denk298fed22005-08-10 10:06:25 +0200454* Fix CompactFlash problem on HMI1001 board
455
Wolfgang Denkc0d487b2005-08-09 21:41:20 +0200456* Make new "mtdparts" code build with older compilers
457 Patch by Andrea Scian, 09 Aug 2005
458
Stefan Roeseb30f2a12005-08-08 12:42:22 +0200459* Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to
460 CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design
461 with the 405 defines and the linux kernel defines.
462 Patch by Stefan Roese, 08 Aug 2005
463
Wolfgang Denk16439ee2005-08-09 17:25:22 +0200464* Fix compiler warnings with older GCC versions
465
Wolfgang Denk47f57792005-08-08 01:03:24 +0200466* Add common (with Linux) MTD partition scheme and "mtdparts" command
467
468 Old, obsolete and duplicated code was cleaned up and replace by the
469 new partitioning method. There are two possible approaches now:
470
471 The first one is to define a single, static partition:
472
473 #undef CONFIG_JFFS2_CMDLINE
474 #define CONFIG_JFFS2_DEV "nor0"
475 #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF /* use whole device */
476 #define CONFIG_JFFS2_PART_SIZE 0x00100000 /* use 1MB */
477 #define CONFIG_JFFS2_PART_OFFSET 0x00000000
478
479 The second method uses the mtdparts command line option and dynamic
480 partitioning:
481
482 /* mtdparts command line support */
483 #define CONFIG_JFFS2_CMDLINE
484 #define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2"
485 #define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
486
487 Command line of course produces bigger images, and may be inappropriate
488 for some targets, so by default it's off.
489
Wolfgang Denkcee01142005-08-08 00:47:14 +0200490* Fix build problems for PM856 Board
491
Wolfgang Denk4967d102005-08-08 00:14:41 +0200492* Fix sign extension bug in 'fpga loadb' command;
493 make 'fpga loadb' always print the file header info
494 Patch by Andrew Dyer, 11 Jan 2005
495
Wolfgang Denkfdb87ed2005-08-07 23:55:50 +0200496* Fix errors that occur when accessing SystemACE CF
497 Patch by Jeff Angielski, 09 Jan 2005
Stefan Roeseb30f2a12005-08-08 12:42:22 +0200498
Wolfgang Denkedc10112005-08-06 02:11:33 +0200499* Document switching between U-Boot and PlanetCore on RPXlite
500 by Sam Song, 24 Dec 2004
501
Wolfgang Denke37c98a2005-08-06 02:03:03 +0200502* Fix PowerQUICC II mask detection.
503 Patch by Eugene Surovegin, 20 Dec 2004
Stefan Roeseb30f2a12005-08-08 12:42:22 +0200504
Wolfgang Denk9f191a12005-08-06 01:56:59 +0200505* Add support for Altera NIOS DK1C20 board
506 Patch by Shlomo Kut, 13 Dec 2004
507
Wolfgang Denk8dd4d332005-08-06 01:42:58 +0200508* Add support for ep8248 board
509 Patch by Yuli Barcohen, 12 Dec 2004
510
511 Minor code cleanup.
512
Wolfgang Denkaaa85952005-08-06 01:21:19 +0200513* Fix baudrate setting for KGDB on MPC8260
514 Patch by HoJin, 11 Dec 2004
515
Wolfgang Denk5582de62005-08-06 01:13:19 +0200516* Fix 'mii help' text formatting
517 Patch by Cory Tusar, 10 Dec 2004
Wolfgang Denk8dd4d332005-08-06 01:42:58 +0200518
Wolfgang Denkb077b502005-08-06 01:11:12 +0200519* Fix return code of NFS command
520 Patch by Hiroshi Ito, 11 Dec 2004
521
Wolfgang Denk12f62412005-08-06 01:02:27 +0200522* Fix typo
523
Wolfgang Denk58550cc2005-08-06 00:11:50 +0200524* Fix compiler warnings in cpu/ppc4xx/usbdev.c
525 Patch by Steven Blakeslee, 04 Aug 2005
526
Stefan Roese363330b2005-08-04 17:09:16 +0200527* Add support for AMCC Bamboo PPC440EP eval board
528 Patch by Stefan Roese, 04 Aug 2005
529
Jon Loeligerebc72242005-08-01 13:20:47 -0500530* Patch by Jon Loeliger
531 Fix style issues primarily in 85xx and 83xx boards.
532 - C++ comments
533 - Trailing white space
534 - Indentation not by TAB
535 - Excessive amount of empty lines
536 - Trailing empty lines
537
Wolfgang Denk64bd88f2005-08-05 20:03:38 +0200538* Patch by Ron Alder, 11 Jul 2005
Lunsheng Wang61e61952005-07-29 10:20:29 -0500539 Add Xianghua Xiao and Lunsheng Wang's support for the
540 GDA MPC8540 EVAL board.
541
Eran Liberty9095d4a2005-07-28 10:08:46 -0500542* Patch by Eran Liberty
543 Add support for the Freescale MPC8349ADS board.
544
Wolfgang Denk64bd88f2005-08-05 20:03:38 +0200545* Patch by Jon Loeliger, 25 Jul 2005
Jon Loeliger64a96f52005-07-25 15:38:06 -0500546 Move the TSEC driver out of cpu/mpc85xx as it will be shared
547 by the upcoming mpc83xx family as well.
548
Wolfgang Denk64bd88f2005-08-05 20:03:38 +0200549* Patch by Jon Loeliger, 05 May 2005
Jon Loeliger77a4f6e2005-07-25 14:05:07 -0500550 Implemented support for MPC8548CDS board.
551 Added DDR II support based on SPD values for MPC85xx boards.
552 This roll-up patch also includes bugfies for the previously
553 published patches:
554 DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
555
Wolfgang Denk64bd88f2005-08-05 20:03:38 +0200556* Patch by Jon Loeliger, 10 Feb 2005
Jon Loeliger08d88602005-07-25 12:14:54 -0500557 Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
558
Wolfgang Denk64bd88f2005-08-05 20:03:38 +0200559* Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005
Jon Loeliger3f34a402005-07-25 11:13:26 -0500560 For MPC85xxCDS:
561 Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
562 for faster flash parts.
563 Add documentation for BR/OR for FLASH.
564
Wolfgang Denk64bd88f2005-08-05 20:03:38 +0200565* Patch by Jon Loeliger 08 Feb 2005
Jon Loeliger4fc25e42005-07-25 10:58:39 -0500566 Determine L2 Cache size dynamically on 85XX boards.
567
Wolfgang Denk64bd88f2005-08-05 20:03:38 +0200568* Patch by Jon Loeliger, Kumar Gala 08 Feb 2005
Jon Loeligerf5ad3782005-07-23 10:37:35 -0500569 - Convert the CPM2 based functionality to use new CONFIG_CPM2
570 option rather than a myriad of CONFIG_MPC8560-like variants.
571 Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
572 Eliminates the CONFIG_MPC8560 option entirely. Distributes the
573 new CONFIG_CPM2 option to each 8260 board.
wdenk26c58432005-01-09 17:12:27 +0000574
Wolfgang Denk9733b3c2005-08-05 12:19:30 +0200575* Add support for MicroSys PM856 board
576 Patch by Josef Wagner, 03 Aug 2005
577
Wolfgang Denk9b187432005-08-05 11:47:10 +0200578* Minor fixes to PM854 board
579 Patch by Josef Wagner, 03 Aug 2005
580
Wolfgang Denkcd2a04d2005-08-04 19:45:01 +0200581* Adjust configuration of XENIAX board
582 (chip select and GPIO required for USB operation)
583
Wolfgang Denkc94dea22005-08-04 01:24:19 +0200584* Fix typos in cpu/85xx/start.S which caused DataTLB exception to be
585 routed to the Watchdog handler
586 Patch by Eugene Surovegin, 18 Jun 2005
587
Wolfgang Denk9733b3c2005-08-05 12:19:30 +0200588* (re)enabled scsi commands do_scsi() and do_scsiboot()
Wolfgang Denk6a3d6b02005-08-04 01:14:12 +0200589 Patch by Denis Peter, 06 Dec 2004
590
Wolfgang Denkdec97322005-08-04 01:09:44 +0200591* Fix endianess problem in TFTP / NFS default filenames
592 Patch by Hiroshi Ito, 06 Dec 2004
593
Wolfgang Denk116edc92005-08-03 23:03:54 +0200594* Ignore broadcast status bit in received frames in 8260 FCC ethernet
595 loopback test code
596 Patch by Murray Jensen, 18 Jul 2005
597
Wolfgang Denk31c939b2005-08-03 22:58:55 +0200598* Fix typo in mkconfig script (used == instead of =)
599 Patch by Murray Jensen, 18 Jul 2005
600
Wolfgang Denkdb5f3862005-08-03 22:32:02 +0200601* Cleanup build problems on 64 bit build hosts
602
Wolfgang Denkf164d362005-08-03 10:01:54 +0200603* Update MAINTAINERS file
604
Stefan Roese3e1f1b32005-08-01 16:49:12 +0200605* Patch by Stefan Roese, 01 Aug 2005:
606 - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
607 (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
608 for details.
609 - Sycamore (PPC405GPr) eval board added (Walnut port is extended
610 to run on both 405GP and 405GPr eval boards).
611
612* Patch by Steven Blakeslee, 27 Jul 2005:
613 - Add support for AMCC PPC440EP/GR.
614 - Add support for AMCC Yosemite PPC440EP eval board.
615 - Add support for AMCC Yellowstone PPC440GR eval board.
616
Wolfgang Denk04a3cc12005-07-31 00:30:09 +0200617* Minor fixes for PPChameleon Board:
618 - fix alignment of NAND size
619 - make code do what the comment says
620
Wolfgang Denk1f207042005-07-30 16:45:16 +0200621* Implement h/w sector protection status synchronization at boot.
622 The code is provided for, and was tested on, the Yukon/Alaska
623 and PM520 boards only.
624
625 A bug in flash_real_protect() for the Yukon board was fixed by
626 adding a function that tells if two banks are on one flash chip.
627
Wolfgang Denk157b4f82005-07-28 10:42:26 +0200628* Fix sysmon POST problem: check I2C error codes
629 This fixes a problem of displaying bogus voltages when the voltages
630 are so low that the I2C devices start failing while the rest of the
631 system keeps running.
632
Wolfgang Denk9419a4f2005-07-28 01:50:14 +0200633* Patch by Cedric Vincent, 6 Jul 2005:
634 Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"
635
Wolfgang Denkcd0bf802005-07-21 16:14:36 +0200636* Patch by Jon Loeliger, 20 Jul 2005:
637 Add missing PCI IO port definitions.
638
Wolfgang Denk7d5b5222005-07-21 15:23:29 +0200639* Add CompactFlash support for HMI1001 board.
640
641* Adjust printed board ID for LWMON board.
642
Wolfgang Denk42a08182005-07-21 15:29:22 +0200643* Fix low-level OHCI transfers for ARM920t and MPC5xxx
644
Wolfgang Denk104866b2005-07-21 11:45:50 +0200645* Add new argument format for flash commands to allow for usage like
646 "erase $(addr) +$(filesize)", i. e. a size argument can be used and
647 U-Boot will automaticially find the end of the corresponding sector.
648
stroesee0138782005-07-05 11:35:27 +0000649* Patch by Stefan Roese, 5 Jul 2005:
650 Update uc100 board PHY setup
651
stroese046c4832005-07-01 15:53:57 +0000652* Patch by Stefan Roese, 1 Jul 2005:
653 Fix PHY address for CATcenter board (now correct!)
654
stroese3c890fe2005-06-30 13:06:07 +0000655* Patch by Stefan Roese, 30 Jun 2005:
656 Fix PHY addresses for PPChameleon and CATcenter boards
657 Change MAINTAINER for most esd boards
658
wdenk2b9d1862005-07-04 00:03:16 +0000659* Patch by Detlev Zundel, 30 Jun 2005:
660 Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
661
wdenka2b932d2005-06-27 13:30:03 +0000662* Fix baudrate calculation problem on MPC5200 systems
663
664* Add EEPROM and RTC support for HMI1001 board
665
666* Patch by Detlev Zundel, 20 Jun 2005:
667 Fix initialization of low active GPIO pins on inka4x0 board
668
wdenkb6f9d3c2005-06-20 10:28:38 +0000669* Enable redundant environment, disable HW flash protection of
670 HMI1001 board
671
wdenkd1894de2005-06-20 10:17:34 +0000672* Patch by Travis Sawyer, 10 Jun 2005:
673 Initialize allocated dev and private hw structures
674 after their respective allocation in 440gx_enet.c
675
676* Patch by Steven Scholz, 10 Jun 2005:
677 Fix byteorder problems with second argument of "bootm" with
678 standalone images;
679
wdenk8d414a72005-06-10 10:00:19 +0000680* Add support for HMI1001 board
681
682* Disable "date" and "sntp" commands on TQM866M
683
wdenk5ceea262005-06-05 20:30:43 +0000684* Fix watchdog reset problems on LWMON board
685
wdenkc28149c2005-05-30 23:55:42 +0000686* Patch by Juergen Selent, 17 May 2005:
687 Add support for Funkwerk VoVPN gateway module.
688
689* Cleanup debug code for MPC8220 FEC driver
690
wdenkf593f462005-05-23 10:49:50 +0000691* Extend burst mode RAM test program to take a loop count
692 (0 = infinite)
693
694* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
695 those boards that use it.
696
wdenka21ad7b2005-05-19 22:39:42 +0000697* Patches by Greg Ungerer, 19 May 2005:
698 - add support for the KS8695P (ARM 922 based) CPU
699 - add support for the OpenGear CM4008, CM4116 and CM4148 boards
700
701* Patch by Steven Scholz, 19 May 2005:
702 Add support for CONFIG_SERIAL_TAG on ARM boards
703
wdenk5c71a7a2005-05-16 15:23:22 +0000704* Add PCI support for Sorcery board.
705 Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
706
wdenk4e5bc872005-05-16 14:19:49 +0000707* Fix compile problems caused by new burst mode SDRAM test;
708 make port pins to trigger logic analyzer configurable
709
wdenkf3da7cc2005-05-13 22:49:36 +0000710* Fix timer handling on MPC85xx systems
711
wdenka7316b02005-05-12 22:48:09 +0000712* Fix debug code in omap5912osk flash driver
713
714* Add support for MPC8247 based "IDS8247" board.
715
wdenk827aad32005-05-10 15:51:35 +0000716* Add support for 2 x TSEC interfaces on the TQM8540 board.
717
wdenkeb8f2fb2005-05-09 10:17:32 +0000718* On LWMON we must use the watchdog to reset the board as the CPU
719 genereated HRESET pulse is too short to reset the external
720 circuitry.
721
wdenke339a7a2005-05-07 19:06:32 +0000722* Add test tool to exercise SDRAM accesses in burst mode
723 (as standalone program, MPC8xx/PowerPC only)
724
wdenk757e8892005-05-05 09:13:21 +0000725* Increase CFG_MONITOR_LEN for Rattler board to match actual code
726 size.
727
wdenke84ec902005-05-05 00:04:14 +0000728* Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
wdenkb85efc22005-05-05 09:51:44 +0000729 March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI
730 added to support LZO and LZARI compression modes (undefined by
731 default).
wdenke84ec902005-05-05 00:04:14 +0000732
wdenke02d2ae2005-05-04 23:50:54 +0000733* Fix problem with symbolic links in JFFS2 code.
734
wdenkcc0e8782005-05-04 23:44:59 +0000735* Use linker ASSERT statement to prevent undetected overlapping of
736 sections on PPChameleon board; other boards might use this, too.
737
stroeseecfc2932005-05-03 06:19:57 +0000738* Patch by Stefan Roese, 03 May 2005:
739 Update for P3G4
740 Fix problems in cmd_universe.c
741
742* Patch by Matthias Fuchs, 03 May 2005:
743 Added missing variable declaration in cmd_nand.c
744 Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
745
wdenk8c61fe52005-04-22 15:09:09 +0000746* Fix INKA4x0: use CS1 as gpio_wkup_6 output
747
wdenkfaaa6022005-04-21 21:10:22 +0000748* Fix bug in the SDRAM initialization code for canmb, IceCube and
749 PM520 boards.
750 Fix PHY address for canmb board.
751
wdenk5fa47792005-04-20 14:38:59 +0000752* Cleanup serial console baudrate calculation on AT91RM9200;
753 get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
wdenkf4569932005-04-20 12:36:05 +0000754
stroesec4b78982005-04-20 06:52:40 +0000755* Patch by Matthias Fuchs, 18 Apr 2005:
756 Make PCI target address spaces on PMC405 and CPCI405 boards
757 configurable via environment variables
758
wdenkb21608e2005-04-20 09:28:54 +0000759* Auto-size RAM on canmb board.
760
wdenkf1d0ff42005-04-13 23:15:10 +0000761* Add support for canmb board
762
stroesee6f6b172005-04-13 10:08:39 +0000763* Patch by Stefan Roese, 13 Apr 2005:
764 Update for esd apc405
765
wdenkd0245fc2005-04-13 10:02:42 +0000766* Fixes for TQM8560 board:
767 - fix clock rates
768 - remove debug messages
769 - fix flash sector protection
770
wdenk10164c62005-04-07 22:36:40 +0000771* Patch by Steven Scholz, 07 Apr 2005:
772 Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C
773
wdenkd0245fc2005-04-13 10:02:42 +0000774* Patches by Steven Scholz, 07 Apr 2005:
wdenk10164c62005-04-07 22:36:40 +0000775 Fix compiler warning in altera.c
wdenkd0245fc2005-04-13 10:02:42 +0000776 Fix warning in cpu/arm920t/at91rm9200/i2c.c
wdenk10164c62005-04-07 22:36:40 +0000777
778* Patch by Ladislav Michl, 06 Apr 2005:
779 Fix voiceblue configuration.
780
stroese180e6f12005-04-07 05:35:12 +0000781* Patch by Stefan Roese, 06 Apr 2005:
782 Updates for OCOTEA board:
783 - Changed U-Boot size from 512kByte to 256kByte
784 - Fixed flash driver to support boot from soldered user flash
785 - Added README for switch from PIBS firmware to U-Boot
786
787* Patch by Travis Sawyer, 05 Apr 2005:
788 - Change timer frequency for ppc 440 from 10 ms to 1 ms.
789 Problem found by Andrew Wozniak.
790
wdenk91fcc952005-04-06 13:52:31 +0000791* Patch by Steven Scholz, 06 Apr 2005:
792 - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
793 - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
794
wdenk2a831612005-04-06 00:04:16 +0000795* Patches by Robert Whaley, 29 Nov 2004:
796 - update the pxa-regs.h file for PXA27x chips
797 - add PXA27x based ADSVIX board
798 - add support for MMC on PXA27x processors
799
800* Patch by Andrew E. Mileski, 28 Nov 2004:
801 Fix PPC4xx SPD SDRAM detection bug
802
803* Patch by Hiroshi Ito, 26 Nov 2004:
804 Fix logic of "test -z" and "test -n" commands
805
wdenke085e5b2005-04-05 23:32:21 +0000806* Patch by Ladislav Michl, 05 Apr 2005:
807 Add support for VoiceBlue board.
808
809* Patch by Ladislav Michl, 05 Apr 2005:
810 Fix netboot_common() prototypes.
811
wdenk915b3762005-04-05 22:30:50 +0000812* Patch by Steven Scholz, 05 Apr 2005:
813 Use i.MX watchdog timer for reset_cpu()
814
815* Patch by Steven Scholz, 05 Apr 2005:
816 Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
817 subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
818 (now in interupts.c)
819
wdenkccfe25d2005-04-05 21:57:18 +0000820* Add support for MPC8220 based "sorcery" board.
821
822* Add support for TQM8560 board.
wdenk8e5263c2005-04-05 16:26:47 +0000823
wdenkf41ff3b2005-04-04 23:43:44 +0000824* Add FEC support for TQM8540 board.
825 Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
826
827* Patch by Martin Krause, 04 Apr 2005:
828 Update default configuration for CMC_PU2 board.
829
wdenkc2a84292005-04-04 12:23:03 +0000830* Patch by Steven Scholz, 04 Apr 2005:
wdenk3d3d99f2005-04-04 12:44:11 +0000831 - remove all references to CONFIG_INIT_CRITICAL for ARM based boards
832 - introduce two new configuration options instead:
833 CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
834
835* Patch by Steven Scholz, 04 Apr 2005:
wdenkc2a84292005-04-04 12:23:03 +0000836 Make sure that MDIO clock does not exceed 2.5 MHz on AT91
837
wdenk7af1f9d2005-04-04 12:08:28 +0000838* Fix timer code for ARM systems: make sure that udelay() does not
839 reset timers so it's save to use udelay() in timeout code.
840
wdenk6f1ff382005-04-03 23:35:57 +0000841* Patch by Mathias Küster, 23 Nov 2004:
842 add udelay support for the mcf5282 cpu
843
844* Patch by Tolunay Orkun, 16 November 2004:
845 fix incorrect onboard Xilinx CPLD base address
wdenke085e5b2005-04-05 23:32:21 +0000846
wdenk874c6752005-04-03 23:22:21 +0000847* Patch by Jerry Van Baren, 08 Nov 2004:
848 - Add low-boot option for MPC8260ADS board (if lowboot is selected,
849 the jumper for the HRCW source should select flash. If lowboot is
850 not selected, the jumper for the HRCW source should select the
851 BCSR.
852 - change default load base address to 0x00400000
853
wdenkbc3202a2005-04-03 23:11:38 +0000854* Patch by Yuli Barcohen, 08 Nov 2004:
855 Add support for Analogue & Micro Rattler boards.
856 Tested on Rattler8248.
857
858* Patch by Andre Renaud, 08 Nov 2004:
859 Fix watchdog support in common/lcd.c
860
861* Patch by Marc Leeman, 05 Nov 2003:
862 Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
863 bug only affects the XPC8245 processors
864
wdenk6d3c6d12005-04-03 22:35:21 +0000865* Patches by Josef Wagner, 29 Oct 2004:
866 - Add support for MicroSys CPU87 board
867 - Add support for MicroSys PM854 board
868
869* Patch by Jian Zhang, 02 Nov 2004:
870 Add 16-bit NAND support
871
wdenk1873b602005-04-03 21:11:16 +0000872* Patch by Scott McNutt, 01 Nov 2004:
873 Add missing NIOS/NIOS2 support for "iminfo" command
874
875* Patch by Detlev Zundel, 29 Oct 2004:
876 Add missing NIOS/NIOS2 support for "mkimage" tool.
877
wdenk6148e742005-04-03 20:55:38 +0000878* Patch by David Adair, 27 Oct 2004:
879 Add missing 440GX SDRAM Controller reset
880
wdenk1e8d0c52005-04-03 17:23:39 +0000881* Patch by Steven Scholz, 25 Oct 2004:
882 Declare reset_cpu() in include/common.h instead locally
883
wdenke0c812a2005-04-03 15:51:42 +0000884* Patch by Yusdi Santoso, 22 Oct 2004:
885 - Add support for HIDDEN_DRAGON board
886 - fix endianess problem in driver/rtl1839.c
887
888* Patch by Allen Curtis, 21 Oct 2004:
889 support multiple serial ports
890
wdenkfa66e932005-04-03 14:52:59 +0000891* Patch by Richard Klingler, 03 Apr 2005:
892 Add call to eth_halt() in net/net.c when called functions fail
893 after eth_init() has been called.
894
895* Patch by Sam Song, 3 April 2005:
896 - Update README.Netconsole
897 - Update README
898
wdenk336b2bc2005-04-02 23:52:25 +0000899* Prepare for SoC rework of ARM code:
900 - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL
901 - rename memsetup into lowlevel_init (function name and source files)
wdenkf9c57a22005-04-03 14:26:46 +0000902 Patch by Steven Scholz, 03 Apr 2005:
903 - create SoC specific directories include/asm-arm/arch-imx and
904 include/asm-arm/arch-s3c24x0
wdenk336b2bc2005-04-02 23:52:25 +0000905
wdenk8d5d28a2005-04-02 22:37:54 +0000906* Fix problems with SNTP support;
907 enable SNTP support in some boards.
908
wdenk9773ef92005-04-01 15:18:44 +0000909* Patches by Martin Krause, 01 Apr 2005:
910 - Fix flash erase timeout on CMC_PU2
911 - Add automatic HW detection for CMC_PU2 and CMC_BASIC
wdenk279b2dd2005-04-01 09:29:14 +0000912
wdenk65ec1102005-04-01 09:14:58 +0000913* Patch by Steven Scholz, 13 March 2005:
914 fix cache enabling for AT91RM9200
915
wdenkb4ad9622005-04-01 00:25:43 +0000916* Patch by Masami Komiya, 30 Mar 2005:
917 add SNTP support and expand time server and time offset fields of
918 DHCP support. See doc/README.SNTP
919
920* Patch by Steven Scholz, 13 Dec 2004:
921 Fix bug in at91rm920 ethernet driver
922
wdenk0af9d012005-03-31 23:44:33 +0000923* Patch by Steven Scholz, 13 Dec 2004:
924 Remove duplicated code by merging memsetup.S files for
925 at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
926
wdenk61c636e2005-03-31 18:42:15 +0000927* Patch by Detlev Zundel, 31 Mar 2005:
928 Cleanup duplicate definition of overwrite_console()
929
930* Update TQM5200 configuration;
931 prepare for Rev. 200 starter kit boards
932
wdenk194b8392005-03-30 23:28:18 +0000933* Patch by Scott McNutt, 21 Oct 2004:
934 Add support for Nios-II EPCS Controller core.
935
936* Patch by Scott McNutt, 20 Oct 2004:
937 Nios-II cleanups:
938 - Add sysid command (Nios-II only).
939 - Locate default exception trampoline at proper offset.
940 - Implement I/O routines (readb, writeb, etc)
941 - Implement do_bootm_linux
942
wdenka5948882005-03-27 23:41:39 +0000943* Patches by Martin Krause, 22 Mar 2005:
944 - use TQM5200_auto as MAKEALL target for TQM5200 systems
945 - add support for SM501 graphics controller
946 - add support for graphic console on TQM5200
947 - add support for TQM5200 Rev 200
948 - cleanup, fix typo in include/configs/TQM5200.h
949
wdenkff86b722005-03-20 22:33:46 +0000950* Patch by Manfred Baral, 17 Mar 2005:
951 Fix typo
952
wdenk6601db22005-03-17 16:43:10 +0000953* Fix RTC configuration for PPChameleon board
954
955* Cleanup, fix typo in include/configs/TQM5200.h
956
stroesee72a7b72005-03-16 20:58:31 +0000957* Patch by Stefan Roese, 16 Mar 2005:
958 Update for esd auto_update and hh405 board
959
wdenk8d3d9ed2005-03-16 16:32:26 +0000960* Adapt for U-Boot image size (new features enabled) on TQM5200
961
wdenk3f3262b2005-03-15 22:56:53 +0000962* Update code for TQM8540 board (and 85xx in general):
963 - Change the name of the Ethernet driver: MOTO ENET -> ENET
964 - Reformat boot messages
965 - Enable redundant environment
966 - Replace the -O2 optimization flag with -mno-string
967
wdenkbfad55d2005-03-14 23:56:42 +0000968* Patch by David Brownell, 10 Mar 2005:
969 Restore copyright statements in OHCI drivers.
970
971* Add support for TQM8540 board
972
wdenka8121e62005-03-14 23:01:03 +0000973* Patch by Detlev Zundel, 14 Mar 2005:
974 NC650: changed NAND flash addressing to using UPMB
975
976* Patch by Stefan Roese, 14 Mar 2005:
stroese4c3d80c2005-03-14 12:56:21 +0000977 Update for esd voh405 fpga image
978
wdenkf189a0d2005-03-14 13:14:58 +0000979* INKA4x0: Allow initialization of LCD backlight dimming from
980 "brightness" environment variable.
981
wdenkb995b0f2005-03-06 01:21:30 +0000982* Add port initialization for digital I/O on INKA4x0
983
wdenka8121e62005-03-14 23:01:03 +0000984* Patch by Stefan Roese, 01 Mar 2005:
stroesec86a0c82005-03-01 17:26:39 +0000985 Update for esd boards dp405 and hub405
986
wdenk286dca82005-03-04 11:27:31 +0000987* Fix get_partition_info() parameter error in all other calls
988 (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).
989
990* Enable USB and IDE support for INKA4x0 board
991
wdenka8121e62005-03-14 23:01:03 +0000992* Patch by Andrew Dyer, 28 Feb 2005:
wdenk286dca82005-03-04 11:27:31 +0000993 fix ext2load passing an incorrect pointer to get_partition_info()
994 resulting in load failure for devices other than 0
995
wdenk62fea7e2005-02-27 23:46:58 +0000996* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
997
wdenkacd05362005-02-24 23:23:29 +0000998* Cleanup USB and partition defines
999
wdenk99408ba2005-02-24 22:44:16 +00001000* Add support for ext2 filesystems and image timestamps to TQM5200 board
1001
1002* Add reset code for Coral-P on INKA4x0 board
1003
1004* Patch by Martin Krause, 28 Jun 2004:
1005 Update for TRAB board.
1006
1007* Fix some missing "volatile"s in MPC5xxx FEC driver
1008
wdenkb22532e2005-02-07 19:44:17 +00001009* Fix cirrus voltage detection (for CPC45)
1010
wdenkc233db82005-02-04 15:38:08 +00001011* Fix byteorder problem in usbboot and scsiboot commands.
1012
wdenkb7345fc2005-02-04 15:02:06 +00001013* Patch by Cajus Hahn, 04 Feb 2005:
1014 - don't insist on leading '/' for filename in ext2load
1015 - set default partition to useful value (1) in ext2load
1016
1017* Patch by Andrew Dyer, 08 Jan 2005:
1018 fix wrong return codes in ext2 code
1019
wdenkf1276d42005-02-03 23:00:49 +00001020* Removed '--no-warn-mismatch' option from Makefile. This option
1021 makes 'ld' to overlook binary objects compatibility.
1022
1023* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
1024 --end-group) outside of the group. This will make 'ld' to do
1025 _multiple_ search in the library group when resolving symbol
1026 references and do only a _single_ seach in libgcc.a after the group
1027 search.
1028
1029* Fix stability problems on CPC45 board again.
1030
1031* Make image detection for diskboot / usbboot / scsiboot more robust
1032 (also check header checksum)
1033
wdenk81414462005-01-31 22:09:11 +00001034* Update CPC45 board configuration.
1035
1036* Add USB and PCI support for INKA4x0 board
1037
wdenkf6925c72005-01-22 18:26:04 +00001038* Fix IDE stability problems on CPC45 board (needs 2 x EIEIO).
1039
wdenk525d7b62005-01-22 18:13:04 +00001040* Code cleanup
1041
wdenkc86cdb92005-01-12 00:38:03 +00001042* Patch by Robin Getz, 13 Oct 2004:
1043 Add standalone application to change SMC91C111 MAC addresses,
1044 see examples/README.smc91111_eeprom
1045
1046* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
1047 Fix Flash support for ARM Integrator CP.
1048
wdenkcb99da52005-01-12 00:15:14 +00001049* Patch by Richard Woodruff, 10 Jan 2005:
1050 Update support for OMAP2420 (ARM11) and H4 board:
1051 o clean up and add new types to H4 memory probe code.
1052 o fix to work with internal boot.
1053 o added PRCM config III operation.
1054 o fix marginal flash timings.
1055 o add revison ATAG usage.
1056 o enable voltage scaling at power chip.
1057 o fix compile error for i2c.
1058
1059* Fix network problem (error when receiving multiple ARP packets)
1060
1061* Patch by Daniel Poirot, 12 Oct 2004:
wdenkd3341052005-01-09 23:48:14 +00001062 Add support for Wind River sbc405 board
1063
1064* Patch by Rainer Brestan, 12 Oct 2004:
1065 Make examples/Makefile more robust
1066
wdenk91a4f362005-01-09 23:33:49 +00001067* Patch by Sam Song, 11 October 2004:
1068 - Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
1069 - Adjust CPU:BUS frequency ratio 1:1 when core frequency
1070 less than 50MHz
1071
1072* Patch by Sam Song, 10 Oct 2004:
1073 Fix a parameter error in run_command() in main.c
1074
1075* Patch by Richard Woodruff, 01 Oct 2004:
wdenkf8062712005-01-09 23:16:25 +00001076 add support for the TI OMAP2420 processor and its H4 reference
1077 board
1078
1079* Patch by Christian Pellegrin, 24 Sep 2004:
1080 Added support for NE2000 compatible (DP8390, DP83902) NICs.
1081
wdenk96c7a8c2005-01-09 22:28:56 +00001082* Patch by Leif Lindholm, 23 Sep 2004:
1083 add support for the AMD db1550 board
1084
1085* Patch by Travis Sawyer, 15 Sep 2004:
1086 Add CONFIG_SERIAL_MULTI support for ppc4xx,
1087 update README.serial_multi
1088
wdenk68005192005-01-09 21:28:15 +00001089* Patches by David Snowdon, 07 Sep 2004:
1090 - add u-boot.hex target in the top level Makefile
1091 - add support for the UNSW/NICTA PLEB 2 board (pleb2)
1092 - use -mtune=xscale and -march=armv5 options for PXA
1093
wdenkc4cbd342005-01-09 18:21:42 +00001094* Patch by Florian Schlote, 08 Sep 2004:
1095 Add support for SenTec-COBRA5272-board (Coldfire).
1096
wdenk310b4fc2005-01-09 18:12:51 +00001097* Patch by Gleb Natapov, 07 Sep 2004:
1098 mpc824x: set PCI latency timer to a sane value
1099 (is 0 after reset).
1100
1101* Patch by Kurt Stremerch, 03 Sep 2004:
1102 Add bitstream configuration option for fpga command (Xilinx only).
1103
wdenk02ac0212005-01-09 17:19:34 +00001104* Patch by Kurt Stremerch, 03 Sep 2004:
1105 Add Xilinx Spartan2E family FPGA support
1106
1107* Patch by Jeff Angielski, 02 Sep 2004:
1108 Add Added support for H2 revision of the EP8260 board.
1109 Fixed formatting for some of the EP8260 related source files.
1110
wdenk26c58432005-01-09 17:12:27 +00001111* Patch by Jon Loeliger, 02 Sep 2004:
1112 Reset monitor size back to 256 so environment can be written
1113 to flash on MPC85xx ADS and CDS releases.
1114
1115* Patch by Paolo Broggini, 02 Sep 2004:
1116 Make BSS clearing on ARM systems more robust
1117
1118* Patch by Yue Hu and Joe, 01 Sep 2004:
1119 - add PCI support for ixp425;
1120 - add EEPRO100 suppor tfor ixdp425 board.
1121
1122* Fix problem with protected sector detection in driver/cfi_flash.c
1123
1124======================================================================
wdenk1b52e832005-01-02 17:02:54 +00001125Changes for U-Boot 1.1.2:
wdenk6c59edc2004-05-03 20:45:30 +00001126======================================================================
1127
wdenk54070ab2004-12-31 09:32:47 +00001128* Code cleanup, mostly for GCC-3.3.x
1129
1130* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
1131 pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
1132 additional ethernet addresses.
1133
1134* Cleanup drivers/i82365.c - avoid duplication of code
1135
1136* Fix bogus "cannot span across banks" flash error message
1137
1138* Code cleanup
1139
1140* Add support for CompactFlash for the CPC45 Board.
1141
wdenk7f5ad442004-12-19 21:39:27 +00001142* Fix problems with CMC_PU2 flash driver.
1143
wdenk11392db2004-12-19 09:58:11 +00001144* Cleanup:
1145 - avoid trigraph warning in fs/ext2/ext2fs.c
1146 - rename UC100 -> uc100
1147
wdenk51242782004-12-18 22:35:43 +00001148* Add support for UC100 board
1149
stroese91673152004-12-16 18:47:58 +00001150* Patch by Stefan Roese, 16 Dez 2004:
1151 - ext2fs support added
1152 - Tundra universe support added
1153 - Coldfire MCF5249 support added (no preloader needed!)
1154 - MCF5249 board TASREG added
1155 - PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405,
1156 VOM405, WUH405
1157 - some esd boards updated
1158 - memory commands "mdc" and "mwc" added for cyclic read/write
1159 (CONFIG_MX_CYCLIC, see README for further description)
1160
wdenk4ca32362004-12-16 15:52:40 +00001161* Add support for INKA4X0 board
1162
wdenk4025aab2004-12-13 00:18:44 +00001163* Patch by Steven Scholz, 12 Dec 2004:
1164 Fix typo in AT91 memory setup.
1165
wdenkdc130442004-12-12 22:06:17 +00001166* Patch by Martin Krause, 27 Oct 2004:
1167 - add support for "STK52xx" board (including PS/2 multiplexer)
1168 - add hardware detection for TQM5200
1169
wdenkb3a4a702004-12-10 11:40:40 +00001170* Clean up CMC PU2 flash driver
1171
1172* Update MAINTAINERS file
1173
1174* Fix bug in MPC823 LCD driver
1175
wdenkac40ade2004-11-24 23:35:19 +00001176* Fix udelay() on AT91RM9200 for delays < 1 ms.
1177
1178* Enable long help on CMC PU2 board;
1179 fix reset issue;
1180 increase CPU speed from 179 to 207 MHz.
1181
wdenk28375a72004-11-22 22:20:07 +00001182* Fix smc91111 ethernet driver for Xaeniax board (need to handle
1183 unaligned tail part specially).
1184
wdenk20dd2fa2004-11-21 00:06:33 +00001185* Update for AT91RM9200DK and CMC_PU2 boards:
1186 - Enable booting directly from flash
1187 - fix CMC_PU2 flash driver
1188
1189* Fix mkimage usage message
1190
wdenk2ff96812004-11-17 20:44:20 +00001191* Map SRAM on NC650 board
1192
wdenkce5b6a92004-11-02 13:00:33 +00001193* Work around for Ethernet problems on Xaeniax board
1194
wdenk337f5652004-10-28 00:09:35 +00001195* Patch by TsiChung Liew, 23 Sep 2004:
1196 - add support for MPC8220 CPU
1197 - Add support for Alaska and Yukon boards
1198
wdenk222f0632004-10-24 23:54:40 +00001199* Fix configuration for ERIC board (needs more room)
1200
1201* Adjust MIPS compiler options at run-time depending on tools version
1202 ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
1203 "-mcpu=4kc" for old tools)
1204
wdenka48ea0a2004-10-19 22:17:51 +00001205* Add passing of the command line and memory size information to the
1206 kernel on xaeniax board.
1207
wdenk27e628f2004-10-11 23:03:10 +00001208* Enable NAND flash support for NC650 board.
1209
1210* Patch by Thomas Lange 07 Oct 2004:
1211 Updated README for DBAu1x00 boards to match current status
1212
wdenkc3919532004-10-11 22:51:13 +00001213* Patch by Philippe Robin, 28 Sept 2004:
1214 Fix Flash support for Versatile.
1215
1216* Patch by Roger Blofeld, 16 Sep 2004:
1217 Fix timeout for DHCP command retry
1218
wdenk8f08c5b2004-10-11 22:43:02 +00001219* Patch by Pantelis Antoniou, 14 Sep 2004:
1220 Fix early serial hang when CONFIG_SERIAL_MULTI is defined.
1221
1222* Patch by Pantelis Antoniou, 14 Sep 2004:
1223 Kick watchdog when bz-decompressing
1224
wdenk61aa0612004-10-11 22:25:49 +00001225* Fix CFG_HZ problems on AT91RM9200 systems
1226 [Remember: CFG_HZ should be 1000 on ALL systems!]
1227
wdenk391b5742004-10-10 23:27:33 +00001228* Patch by Gridish Shlomi, 30 Aug 2004:
1229 - Add support to revA version of PQ27 and PQ27E.
1230 - Reverted MPC8260ADS baudrate back to original 115200
1231
1232* Patch by Hojin, 17 Sep 2004:
1233 Fix typo in cfi_flash.c
wdenk17b211b2004-10-11 23:10:30 +00001234
wdenk391b5742004-10-10 23:27:33 +00001235* Patch by Mark Jonas, 09 September 2004:
1236 mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
1237 error message
1238
1239* Patch by Mark Jonas, 31 August 2004:
1240 Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
1241 improves FTP performance for MPC5200 systems. Enabled for IceCube
1242 by default.
1243
wdenkadf849c2004-10-10 22:44:24 +00001244* Patch by Michael Bendzick, 30 Aug 2004:
1245 - Improve platform.S code for omap1510inn that detects whether code
1246 is running from SDRAM or not. Patch allows SDRAM to be configured
1247 if code is running out of SRAM at 0x20000000.
1248
1249* Patch by Frederick Klatt, 30 Aug 2004:
1250 Add support for the Wind River SBC8540/SBC8560 boards
1251
wdenke85b7a52004-10-10 22:16:06 +00001252* Configure SX1 board to use drivers/cfi_flash.c
1253
1254* Patches by Michael Bendzick, 30 Aug 2004:
1255 - Configure omap1510inn board to use drivers/cfi_flash.c
1256 - Make drivers/cfi_flash.c protect environment and redundant
1257 environment.
1258
1259* Patch by Steven Scholz, 23 Jun 2004:
1260 - Add script (tools/img2brec.sh) to programm U-Boot into
1261 (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
1262
wdenkef3386f2004-10-10 21:27:30 +00001263* Patches by Scott McNutt, 24 Aug 2004:
1264 - Add support for Altera Nios-II processors.
1265 - Add support for Psyent PCI-5441 board.
1266 - Add support for Psyent PK1C20 board.
1267
wdenk0aeb8532004-10-10 21:21:55 +00001268* Patches by Jon Loeliger, 24 Aug 2004:
1269 - Add support for the MPC8541 and MPC8555 CDS boards
1270 - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
1271 - Convert MPC85xxADS to use common CFI flash driver
wdenk0424e5d2004-10-10 20:23:57 +00001272 - Fix PCI window on MPC85xx; remove unneeded PCI initialization
1273 from board_early_init_f()
1274 - Provide SW workaround for PCI initialization on 85xx CDS
wdenk0424e5d2004-10-10 20:23:57 +00001275
wdenk8596ffd2004-10-10 18:49:14 +00001276* Patches by George G. Davis, 24 Aug 2004:
1277 - Enable ramdisk/initrd tagged param support for omap1610h2_config
1278 - Remove static network setup defaults from mx1ads_config
wdenk767fbd42004-10-10 18:41:04 +00001279 - update ARM boards to use constants from mach-types.h
1280
wdenkcbb52882004-10-10 18:03:33 +00001281* Patch by Gary Jennejohn, 04 Oct 2004:
1282 - fix I2C on at91rm9200
1283 - add support for Ricoh RS5C372A RTC
1284
wdenk70ae5b42004-10-10 17:05:18 +00001285* Patch by Gary Jennejohn, 01 Oct 2004:
1286 - add support for CMC PU2 board
1287 - add support for I2C on at91rm9200
1288
1289* Patch by Gary Jennejohn, 28 Sep 2004:
1290 fix baudrate handling on at91rm9200
1291
wdenk02075fd2004-10-09 23:33:42 +00001292* Patch by Yuli Barcohen, 22 Aug 2004:
1293 - remove ZPC.1900 board-specific flash driver;
1294 switch the port to generic CFI driver;
1295 - port clean-up
1296
wdenke4ef9e82004-10-09 23:28:40 +00001297* Patch by Hinko Kocevar, 21 Aug 2004:
1298 Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
1299
wdenk9ca7bbc2004-10-09 23:25:58 +00001300* Clean up tools/bmp_logo.c to not add trailing white space
1301
1302* Patch by Hinko Kocevar, 21 Aug 2004:
1303 - Group common framebuffer functions in common/lcd.c
1304 - Group common framebuffer macros and #defines in include/lcd.h
1305 - Provide calc_fbsize() for video ATAG
1306
wdenkfb30b4c2004-10-09 22:44:59 +00001307* Patch by Sam Song, 21 August 2004:
1308 - Fix a typo in README
1309 - Align "(RO)" output for "flinfo" after "protect on"
1310 - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
1311 ratio 1:1 when core frequency less than 50MHz
1312
wdenk9ca7bbc2004-10-09 23:25:58 +00001313* Patches by Hinko Kocevar, 21 Aug 2004:
wdenk5fa9b392004-10-09 22:32:26 +00001314 - fix some "use of label at end of compound statement" warnings
1315 - Define type of LCD panel on lubbock board if CONFIG_LCD is used
1316
wdenkf8e9a232004-10-09 22:21:29 +00001317* Patch by Steven Scholz, 16 Aug 2004:
1318 - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
1319 - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
1320 - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
1321 - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
1322 into cpu/arm920t/$(SOC)/
1323
wdenk57bfdd42004-09-29 22:55:14 +00001324* Patches by Sean Chang, 09 Aug 2004:
1325 - Added support for both 8 and 16 bit mode access to System ACE CF
1326 through MPU.
1327 - Fixed missing System ACE CF device during get FAT partition info
1328 in fat_register_device function.
1329 - Enabled System ACE CF support on ML300.
1330
1331* Patch by Sean Chang, 09 Aug 2004:
1332 Synch defines for saveenv and do_saveenv functions so they get
1333 compiled under the same statement.
1334
1335* Patch by Sean Chang, 09 Aug 2004:
wdenk97e8bda2004-09-29 22:43:59 +00001336 - Added I2C support for ML300.
1337 - Added support for ML300 to read out its environment information
1338 stored on the EEPROM.
1339 - Added support to use board specific parameters as part of
1340 U-Boot's environment information.
1341 - Updated MLD files to support configuration for new features
1342 above.
1343
wdenk57bfdd42004-09-29 22:55:14 +00001344* Patches by Travis Sawyer, 05 Aug 2004:
wdenk97e8bda2004-09-29 22:43:59 +00001345 - Remove incorrect bridge settings for eth group 6
1346 - Add call to setup bridge in ppc_440x_eth_initialize
1347 - Fix ppc_440x_eth_init to reset the phy only if its the
1348 first time through, otherwise, just check the phy for the
1349 autonegotiated speed/duplex. This allows the use of netconsole
1350 - only print the speed/duplex the first time the phy is reset.
1351
wdenk7d1eb822004-09-29 11:02:56 +00001352* Patch by Shlomo Kut, 29 Mar 2004:
1353 Add support for MKS Instruments "Quantum" board
1354
1355* Fix build problem with Cogent boards;
1356 avoid using <asm/byteorder.h> when using the host compiler
1357
wdenkd9ee50d2004-09-28 21:51:42 +00001358* Patch by Ganapathi C, 04 Aug 2004:
1359 Fix NFS timeout issue
1360
wdenk99651602004-09-28 21:39:45 +00001361* Patch by Yuli Barcohen, 19 Jul 2004:
1362 - Fix host tools building in Cygwin environment
1363 - Fix header files search order for host tools
1364
1365* Patch by Tom Armistead, 19 Jul 2004:
1366 Fix kgdb.S support for 74xx_75x cpu
1367
wdenka9799ed2004-09-28 21:26:26 +00001368* Patch by Jon Loeliger, 15 Jul 2004:
1369 Fix MPC85xx I2C driver
1370
wdenke2d6d742004-09-28 20:34:50 +00001371* Fix problems with CDROM drive as slave device on Lite5200 IDE bus.
1372
wdenk5b835a32004-09-28 19:00:19 +00001373* Patch by Stephen Williams, 15 July 2004
1374 Set the PCI class code for JSE board as part of PCI interface setup
1375
1376* Patch by Michael Bendzick, 15 Jul 2004:
1377 Fix problem with writes with odd sizes in drivers/cfi_flash.c when
1378 CFG_FLASH_USE_BUFFER_WRITE is set
1379
wdenk20bddb32004-09-28 17:59:53 +00001380* Patch by Yuli Barcohen, 13 Jul 2004:
1381 Allow clock setting on MPC866/MPC885 series chips according to
1382 environment variable `cpuclk'
1383
1384* Patch by Yuli Barcohen, 20 Apr 2004:
1385 Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
1386
wdenkfa89d7c2004-09-28 16:44:41 +00001387* Patch by Vincent Dubey, 24 Sep 2004:
1388 Add support for xaeniax board
1389
wdenkdee058f2004-09-27 20:20:11 +00001390* Add comment about non-GPL character of standalone applications to
1391 COPYING file
1392
1393* Fix FEC ethernet problem on NSCU board.
1394
wdenkb2fc7e12004-09-21 23:33:32 +00001395* Patch by Gary Jennejohn, 09 Sep 2004:
1396 allow to use USART1 as console port on at91rm9200dk boards
1397
stroesea7a4df32004-09-16 12:37:13 +00001398* Patch by Stefan Roese, 16 Sep 2004:
1399 Update AR405 board.
1400
wdenk9e7130b2004-09-09 17:44:35 +00001401* Fix SysClk handling for PPChameleon and CATcenter boards
1402
wdenka0ebde52004-09-08 22:03:11 +00001403* Patch by Detlev Zundel, 08 Sep 2004:
1404 Update etags build target
1405
1406* Improve NetConsole support: add support for broadcast destination
1407 address and buffered input.
1408
1409* Cleanup compiler warnings for GCC 3.3.x and later
1410
1411* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
1412
wdenk0bbcbd22004-08-28 22:45:57 +00001413* Add support for IDS "NC650" board
1414
wdenk79cf7572004-08-28 21:09:14 +00001415* Add automatic update support for LWMON board
1416
1417* Clear Block Lock-Bits when erasing flash on LWMON board.
1418
1419* Fix return code of "fatload" command
1420
1421* Enable MSDOS/VFAT filesystem support for LWMON board
1422
wdenkda54bc92004-08-04 21:56:49 +00001423* Patch by Martin Krause, 03 Aug 2004:
1424 change timing for SM501 graphics controller on TQM5200 module
1425
1426* Patch by Mark Jonas, 13 July 2004:
1427 - Total5200 LCD now run in little endian mode. Endianess conversion
1428 is done in hardware.
wdenk0bbcbd22004-08-28 22:45:57 +00001429 - Removed last reference to "console" environment variable.
wdenkda54bc92004-08-04 21:56:49 +00001430
wdenk6e44b0f2004-08-02 23:39:03 +00001431* Patches by Lars Munch, 12 Jul 2004:
1432 - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
1433 board specific
1434 - split out the LXT971A PHY from ns_9750_eth.h
1435 - split the dm9161 phy part out of at91rm9200_ether.c
1436
wdenkda04a8b2004-08-02 23:22:59 +00001437* Patch by Andreas Engel, 12 Jul 2004:
1438 Replaced hardcoded PL011 clock frequency with config variable.
1439 Fixed wrong CONFIG_CMD_DFL doc.
1440
1441* Patch by Thomas Viehweger, 09 Jun 2004:
1442 make it possible to remove chpart when there is only one partition
1443
wdenkb8fb6192004-08-02 21:11:11 +00001444* Add support for console over UDP (compatible to Ingo Molnar's
1445 netconsole patch under Linux)
1446
wdenk492b9e72004-08-01 23:02:45 +00001447* Patch by Jon Loeliger, 16 Jul 2004:
1448 - support larger DDR memories up to 2G on the PC8540/8560ADS and
1449 STXGP3 boards
1450 - Made MPC8540/8560ADS be 33Mhz PCI by default.
1451 - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
1452 and CONFIG_L2_INIT_RAM options.
1453 - Refactor Local Bus initialization out of SDRAM setup.
1454 - Re-implement new version of LBC11/DDR11 errata workarounds.
1455 - Moved board specific PCI init parts out of CPU directory.
1456 - Added TLB entry for PCI-1 IO Memory
1457 - Updated README.mpc85xxads
1458
wdenk7ac16102004-08-01 22:48:16 +00001459* Patch by Sascha Hauer, 28 Jun:
1460 - add generic support for Motorola i.MX architecture
1461 - add support for mx1ads, mx1fs2 and scb9328 boards
1462
1463* Patches by Marc Leeman, 23 Jul 2004:
1464 - Add define for the PCI/Memory Buffer Configuration Register
1465 - corrected comments in cpu/mpc824x/cpu_init.c
1466
1467* Add support for multiple serial interfaces
1468 (for example to allow modem dial-in / dial-out)
1469
stroese5a668712004-07-15 14:41:43 +00001470* Patch by Stefan Roese, 15 Jul 2004:
1471 cpu/ppc4xx/sdram.c rewritten now using get_ram_size()
1472
wdenk3cc599e2004-08-01 13:09:47 +00001473* Fix NSCU config; add ethernet wakeup code.
1474
wdenk7ac16102004-08-01 22:48:16 +00001475* Add link for preloader for Motorola Coldfire to README.m68k
wdenk3cc599e2004-08-01 13:09:47 +00001476
wdenkbac38cb2004-07-12 22:34:51 +00001477* Patch by Michael Bendzick, 12 Jul 2004:
1478 fix output formatting in drivers/cfi_flash.c
1479
wdenk973f6332004-07-12 14:37:59 +00001480* Patch by Mark Jonas, 02 Jul 2004:
1481 Fix lowboot (again) on MPC5xxx
1482
wdenkfa366cc2004-07-11 22:27:55 +00001483* Patch by Curt Brune, 07 Jul 2004:
1484 relocate exception vectors on arm720t if needed
1485
wdenk82db02f2004-07-11 22:19:26 +00001486* Patch by George G. Davis, 06 Jul 2004:
1487 - update mach-types.h to latest arm.linux.org.uk master list
1488 - Set correct OMAP1610 bi_arch_number for build target
1489
1490* Patch by Curt Brune, 06 Jul 2004:
1491 evb4510: add support for timer interrupt; cleanup
1492
wdenka8c13d42004-07-11 21:49:42 +00001493* Patch by Dan Poirot, 06 Jul 2004:
1494 Fix sbc8260 environment variables
1495
1496* Cleanup redundand "console" environment variable
1497
wdenk7dd13292004-07-11 20:04:51 +00001498* Patch by Mark Jonas, 05 Jul 2004:
1499 add support for the Total5100's and Total5200's LCD screen
1500
1501* Patches by Dan Eisenhut, 01 Jul 2004:
1502 - README fixes.
1503 - Move doc2000.h include to prevent compiler warning on some boards
1504
wdenkcc3f8a92004-07-11 19:17:20 +00001505* Patch by Mark Jonas, 01 Jul 2004:
1506 Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
1507 MGT5100 and MPC5200 based Freescale platforms.
1508
wdenk361f4a22004-07-11 18:10:30 +00001509* Patch by Philippe Robin, 01 Jul 2004:
1510 Add initialization for Integrator and versatile board files.
1511
1512* Patch by Hinko Kocevar, 01 Jun 2004:
1513 Fix VFD FB allocation, add LCD FB allocation on ARM
1514
wdenk64519362004-07-11 17:40:54 +00001515* Patch by Martin Krause, 30 Jun 2004:
1516 Add support for TQM5200 board
1517
1518* Patch by Martin Krause, 29 Jun 2004:
1519 Add loopw command: infinite write loop on address range
1520
wdenk20a61222004-07-10 23:48:41 +00001521* Patches by Yasushi Shoji, 29 Jun 2004:
1522 - add empty include/asm-microblaze/processor.h
1523 - add to CREDITS and MAINTAINERS
1524 - add gd initialization
1525 - add MicroBlaze and SUZAKU board to MAKEALL script
1526 - add reset support for SUZAKU
1527 - add flush_cache() for MicroBlaze
1528 - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
1529 size flash memory on SUZAKU
1530
wdenkb5bb1392004-07-10 23:11:10 +00001531* Patch by Prakash Kumar, 27 Jun 2004:
1532 Add support for the PXA250 based Intrinsyc Cerf board.
1533
1534* Patch by Yasushi Shoji, 27 Jun 2004:
1535 fix comment in include/common.h
1536
wdenk265d2172004-07-10 22:35:59 +00001537* Rename SBC8560 into sbc8560 for consistency
1538
1539* Patch by Daniel Poirot, 24 Jun 2004:
1540 Add support for Wind River's sbc8240 board
1541
1542* Patches by Yasushi Shoji, 26 Jun 2004:
1543 - drivers/serial_xuartlite.c: fix "return 0" in void function
1544 - add microblaze support to mkimage tool
1545
wdenk3203c8f2004-07-10 21:45:47 +00001546* Patch by Fred Klatt, 25 Jun 2004:
wdenk265d2172004-07-10 22:35:59 +00001547 Add support for WindRiver's sbc8560 board
wdenk3203c8f2004-07-10 21:45:47 +00001548
1549* Patch by Nicolas Lacressonniere, 24 Jun 2004
1550 Small Bugs fixes for "at91rm9200dk" board:
1551 - Timing modifications for SPI DataFlash access
1552 - Fix NAND flash detection bug
1553
1554* Patch by Nicolas Lacressonniere, 24 Jun 2004:
1555 Add Support for Flash AT49BV6416 for AT91RM9200DK board
1556
wdenk13eb2212004-07-09 23:27:13 +00001557* Patch by Jon Loeliger, 17 June 2004:
1558 Completion of the 8540ADS/8560ADS updates:
1559 Fix some PCI and Rapid I/O memory maps,
1560 Initialize both TSEC 1 and 2,
1561 Initialize SDRAM
1562 Update MAINTAINER for 85xx boards and README.mpc85xxads
1563
wdenkec5dc0d2004-07-09 22:51:01 +00001564* Patch by Yuli Barcohen, 16 Jun 2004:
1565 Remove obsolete AdderII port which was superseded by unified
1566 AdderII/Adder87x port
1567
1568* Patch by Ladislav Michl, 16 Jun 2004:
1569 Fix gcc-3.3.3 warnings for smc91111.c
1570
stroeseaa192712004-07-02 14:38:26 +00001571* Patch by Stefan Roese, 02 Jul 2004:
1572 - Fix bug in 405 ethernet driver; allocated data not cleared!
1573 - Fix problem in 405 i2c driver; don't try to print without console!
1574
wdenk3ea95e42004-07-01 22:02:29 +00001575* Patch by Paul Ruhland, 11 Jun 2004:
1576 Remove debug code from 'board/lpd7a40x/flash.c'
1577
wdenk99874b42004-07-01 21:40:08 +00001578* Patch by Andrea Marson, 11 Jun 2004:
1579 Update for PPChameleon board:
1580 - support for SysClk @ 25MHz
1581 - support for Silicon Motion SM712 VGA controller
1582 - some clean ups
1583
wdenk3337af42004-07-01 20:28:03 +00001584* Patches by Richard Woodruff, 10 Jun 2004:
1585 - fix problems with examples/stubs.c for GCC >= 3.4
1586 - fix problems with gd initialization
1587
wdenkf2140d52004-07-01 16:30:44 +00001588* Patch by Curt Brune, 17 May 2004:
1589 - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
1590 - Add support for ESPD-Inc. EVB4510 Board
1591
1592* Patch by Marc Leeman, 11 May 2004:
1593 Fix for MPC8245 - reading PPC Memory from another device with the
1594 PPC as PCI target device corrupts data due to interenal hardware
1595 buffering.
1596
wdenk01686632004-06-30 22:59:18 +00001597* Fix "cls" command when used with splash screen
1598
1599* Increase NFS download timeout (now 1 min - 10 sec is to short for a
1600 slow download of a big image)
1601
wdenk0811ded2004-06-25 23:35:58 +00001602* Add "cls" function to MPC823 LCD driver so we can reinitialize the
1603 display even after showing a bitmap
1604
wdenk9e930b62004-06-19 21:19:10 +00001605* Patch by Josef Wagner, 04 Jun 2004:
1606 - DDR Ram support for PM520 (MPC5200)
1607 - support for different flash types (PM520)
1608 - USB / IDE / CF-Card / DiskOnChip support for PM520
1609 - 8 bit boot rom support for PM520/CE520
1610 - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
1611 - I2C and RTC support for CPC45
1612 - support of new flash type (28F160C3T) for CPC45
1613
wdenk9e076902004-06-17 18:50:45 +00001614* Fix flash parameters passed to Linux for PPChameleon board
1615
1616* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
1617
wdenk37bdfdf2004-06-10 21:55:33 +00001618* Patch by Paul Ruhland, 10 Jun 2004:
wdenk9e930b62004-06-19 21:19:10 +00001619 fix support for Logic SDK-LH7A404 board and clean up the
wdenk37bdfdf2004-06-10 21:55:33 +00001620 LH7A404 register macros.
1621
1622* Patch by Matthew McClintock, 10 Jun 2004:
1623 Modify code to select correct serial clock on Sandpoint8245
1624
wdenkefc6f362004-06-10 21:34:36 +00001625* Patch by Robert Schwebel, 10 Jun 2004:
1626 Add support for Intel K3 strata flash.
1627
1628* Patch by Thomas Brand, 10 Jun 2004:
1629 Fix "loads" command on DK1S10 board
1630
wdenk9f664dd2004-06-09 21:50:45 +00001631* Patch by Yuli Barcohen, 09 Jun 2004:
wdenk5b1e6142004-06-09 21:54:22 +00001632 Add support for 8MB flash SIMM and JFFS2 file system on
1633 Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).
1634
1635* Patch by Yuli Barcohen, 09 Jun 2004:
wdenk9f664dd2004-06-09 21:50:45 +00001636 Add support for Analogue&Micro Adder87x and the older AdderII board.
1637
1638* Patch by Ming-Len Wu, 09 Jun 2004:
1639 Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
1640
wdenkec432742004-06-09 21:04:48 +00001641* Patch by Sam Song, 09 Jun 2004:
1642 - Add support for RPXlite_DW board
1643 - Update FLASH driver for 4*AM29DL323DB90VI
1644 - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
1645
wdenk2d644822004-06-09 17:45:32 +00001646* Patch by Mark Jonas, 08 June 2004:
1647 - Make MPC5200 boards evaluate the SVR to print processor name and
1648 version in checkcpu() (cpu/mpc5xxx/cpu.c).
1649
1650* Patch by Kai-Uwe Bloem, 06 May 2004:
1651 Fix endianess problem in cramfs code
1652
wdenkaeba06f2004-06-09 17:34:58 +00001653* Patch by Tom Armistead, 04 Jun 2004:
1654 Add support for MAX6900 RTC
1655
1656* Patches by Ladislav Michl, 03 Jun 2004:
1657 - fix cfi_flash.c on LE systems
1658 - let 'make mrproper' delete u-boot.img as well
1659 - turn printf into debug in cfi_flash.c
1660
wdenk51108172004-06-09 15:37:23 +00001661* Patch by Kurt Stremerch, 28 May 2004:
1662 Add support for Exys XSEngine board
1663
wdenk604b7a12004-06-09 15:29:49 +00001664* Patch by Martin Krause, 27 May 2004:
1665 Fix a MPC5xxx I2C timing issue in i2c_probe().
1666
1667* Patch by Leif Lindholm, 27 May 2004:
1668 Fix board_init_f() for dbau1x00 board.
1669
wdenk920e91b2004-06-09 15:25:53 +00001670* Patch by Imre Deak, 26 May 2004:
1671 On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
1672 Set flash base accordingly, and decide whether to do or skip board
1673 specific setup steps.
1674
1675* Patch by Josef Baumgartner, 26 May 2004:
1676 Add missing define in include/asm-m68k/global_data.h
1677
wdenkd11115a2004-06-09 15:24:18 +00001678* Patch by Josef Baumgartner, 25 May 2004:
1679 Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c
1680
1681* Patch by Paul Ruhland, 24 May 2004:
1682 fix SDRAM initialization for LPD7A400 board.
1683
wdenk79b59372004-06-09 14:58:14 +00001684* Patch by Jian Zhang, 20 May 2004:
1685 add support for environment in NAND flash
1686
wdenk76dd6c72004-06-09 14:47:54 +00001687* Patch by Yuli Barcohen, 20 May 2004:
1688 Add support for Interphase iSPAN boards.
1689
1690* Patches by Paul Ruhland, 17 May 2004:
1691 - Add I/O functions to the smc91111 ethernet driver to support the
1692 Logic LPD7A40x boards.
wdenk3c711762004-06-09 13:37:52 +00001693 - Add support for the Logic Zoom LH7A40x based SDK board(s),
1694 specifically the LPD7A400.
1695
1696* Patches by Robert Schwebel, 15 May 2004:
1697 - call MAC address reading code also for SMSC91C111;
1698 - make SMSC91C111 timeout configurable, remove duplicate code
1699 - fix get_timer() for PXA
1700 - update doc/README.JFFS2
1701 - use "bootfile" env variable also for jffs2
1702
wdenk7e920de2004-06-09 12:47:02 +00001703* Patch by Tolunay Orkun, 14 May 2004:
1704 Add support for Cogent CSB472 board (8MB Flash Rev)
1705
wdenk6568eaa2004-06-09 12:42:26 +00001706* Patch by Thomas Viehweger, 14 May 2004:
1707 - flash.h: more flash types added
1708 - immap_8260.h: some bits added (useful for RMII)
1709 - cmd_coninfo.c: typo corrected, printf -> puts
1710 - reduced size by replacing spaces with tab
1711
wdenk0359dde2004-06-09 10:15:00 +00001712* Patch by Robert Schwebel, 13 May 2004:
1713 Add 'imgextract' command: extract one part of a multi file image.
1714
wdenkcc245992004-06-09 00:51:50 +00001715* Patches by Jon Loeliger, 11 May 2004:
wdenka445ddf2004-06-09 00:34:46 +00001716 Dynamically handle REV1 and REV2 MPC85xx parts.
1717 (Jon Loeliger, 10-May-2004).
1718 New consistent memory map and Local Access Window across MPC85xx line.
1719 New CCSRBAR at 0xE000_0000 now.
1720 Add RAPID I/O memory map.
1721 New memory map in README.MPC85xxads
1722 (Kumar Gala, 10-May-2004)
1723 Better board and CPU identification on MPC85xx boards at boot.
1724 (Jon Loeliger, 10-May-2004)
1725 SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
1726 Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
1727 (Jim Robertson, 10-May-2004)
1728 Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
1729 Supports multiple PHYs.
1730 (Andy Fleming, 10-May-2004)
1731 Some README.MPC85xxads updates.
1732 (Kumar Gala, 10-May-2004)
1733 Copyright updates for "Freescale"
1734 (Andy Fleming, 10-May-2004)
1735
wdenk96fe0d32004-06-09 00:15:33 +00001736* Patch by Stephen Williams, 11 May 2004:
1737 Add flash support for ST M29W040B
1738 Reduce JSE specific flash.c to remove dead code.
1739
wdenk7f1447f2004-06-09 00:10:59 +00001740* Patch by Markus Pietrek, 04 May 2004:
1741 Fix clear_bss code for ARM systems (all except s3c44b0 which
1742 doesn't clear BSS at all?)
1743
1744* Fix "ping" problem on INC-IP board. Strange problem:
1745 Sometimes the store word instruction hangs while writing to one of
1746 the Switch registers, but only if the next instruction is 16-byte
1747 aligned. Moving the instruction into a separate function somehow
1748 makes the problem go away.
1749
wdenk914be132004-06-08 00:22:43 +00001750* Patch by Rishi Bhattacharya, 08 May 2004:
1751 Add support for TI OMAP5912 OSK Board
1752
1753* Patch by Sam Song May, 07 May 2004:
1754 Fix typo of UPM table for rmu board
1755
1756* Patch by Pantelis Antoniou, 05 May 2004:
wdenkc4e854f2004-06-07 23:46:25 +00001757 - Intracom board update.
1758 - Add Codec POST.
1759
wdenk2a6109c2004-06-06 23:53:59 +00001760* Add support for the second Ethernet interface for the 'PPChameleon'
1761 board.
1762
wdenke3a06802004-06-06 23:13:55 +00001763* Patch by Dave Peverley, 30 Apr 2004:
1764 Add support for OMAP730 Perseus2 Development board
1765
1766* Patch by Alan J. Luse, 29 Apr 2004:
1767 Fix flash chip-select (OR0) option register setting on FADS boards.
1768
1769* Patch by Alan J. Luse, 29 Apr 2004:
1770 Report MII network speed and duplex setting properly when
1771 auto-negotiate is not enabled.
1772
1773* Patch by Jarrett Redd, 29 Apr 2004:
1774 Fix hang on reset on Ocotea board due to flash in wrong mode.
1775
wdenk6b1aa8d2004-06-06 22:11:41 +00001776* Patch by Dave Peverley, 29 Apr 2004:
1777 add MAC address detection to smc91111 driver
1778
1779* Patch by David Müller, 28 Apr 2004:
1780 fix typo in lib_arm/board.c
1781
wdenk0e2bd9c2004-06-06 21:51:03 +00001782* Patch by Tolunay Orkun, 20 Apr 2004:
1783 - README update: add CONFIG_CSB272 and csb272_config
1784 - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
1785 i2cfast environment variable
1786
wdenka7556b22004-06-06 21:35:06 +00001787* Patch by Yuli Barcohen, 19 Apr 2004:
1788 - Rename DUET_ADS to MPC885ADS
1789 - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
1790 - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
1791 - Clean up FADS family port to use the new defines
1792
wdenkf8c590b2004-06-01 21:08:17 +00001793* Fix PCI support on CPC45 board
1794
wdenke4adb352004-05-19 21:33:14 +00001795* Patch by Scott McNutt, 25 Apr 2004:
1796 Add Nios GDB/JTAG Console support:
1797 - Add stubs to support gdb via JTAG.
1798 - Add support for console over JTAG.
1799 - Minor cleanup.
1800
wdenkbb33bab2004-05-13 13:23:58 +00001801* Add support for CATcenter board (based on PPChameleon ME module)
1802
wdenke07ec1b2004-05-12 22:54:36 +00001803* Patch by Klaus Heydeck, 12 May 2004:
1804 Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
1805 load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
1806 various changes to KUP4 board specific files
1807
wdenkaf143832004-05-12 22:18:31 +00001808* Fix minor network problem on MPC5200: need some delay between
1809 resetting the PHY and sending the first packet. Implemented in a
1810 "natural" way by invoking the PHY reset and initialization code
1811 only once after power on vs. each time the interface is brought up.
1812
wdenkbd8cf2f2004-05-11 21:53:55 +00001813* Add some limited support for low-speed devices to SL811 USB controller
1814 (at least "usb reset" now passes successfully and "usb info" displays
1815 correct information)
1816
wdenk63a10be2004-05-08 20:33:20 +00001817* Change init sequence for multiple network interfaces: initialize
1818 on-chip interfaces before external cards.
1819
wdenkf248ebc2004-05-05 19:44:41 +00001820* Fix memory leak in the NAND-specific JFFS2 code
1821
1822* Fix SL811 USB controller when attached to a USB hub
1823
wdenk50fc90c2004-05-05 08:31:53 +00001824* Fix config option spelling in PM520 config file
1825
1826* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
1827 patches by Pantelis Antoniou, 30 Mar 2004)
1828
wdenk6c59edc2004-05-03 20:45:30 +00001829* Fix minor NAND JFFS2 related issue
1830
1831* Fixes for SL811 USB controller:
1832 - implement workaround for broken memory stick
1833 - improve error handling
1834
1835* Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better
1836 cope with congested networks.
1837
1838======================================================================
wdenk33591052004-04-12 14:31:43 +00001839Changes for U-Boot 1.1.1:
1840======================================================================
wdenk12490652004-04-18 21:13:41 +00001841
wdenk7ad5e4c2004-04-25 15:41:35 +00001842* Patch by Travis Sawyer, 23 Apr 2004:
1843 Fix VSC/CIS 8201 phy descrambler interoperability timing due to
1844 errata from Vitesse Semiconductor.
wdenk7b370962004-04-25 14:37:29 +00001845
1846* Patch by Philippe Robin, 22 Apr 2004:
wdenke07ec1b2004-05-12 22:54:36 +00001847 Fix ethernet configuration for "versatile" board
wdenk7b370962004-04-25 14:37:29 +00001848
1849* Patch by Kshitij Gupta, 21 Apr 2004:
1850 Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards
1851
1852* Patch by Steven Scholz, 24 Feb 2004:
1853 Fix a bug in AT91RM9200 ethernet driver:
1854 The MII interface is now initialized before accessing the PHY.
1855
wdenk656140b2004-04-25 13:18:40 +00001856* Patch by John Kerl, 19 Apr 2004:
1857 Use U-boot's miiphy.h for PHY register names, rather than
1858 introducing a new header file.
1859
1860* Update pci_ids.h from linux-2.4.26
1861
1862* Patch by Masami Komiya, 19 Apr 2004:
1863 Fix problem cause by VLAN function on little endian architecture
1864 without VLAN environment
1865
wdenkc78bf132004-04-24 23:23:30 +00001866* Clean up the TQM8xx_YYMHz configurations; allow to use the same
wdenk656140b2004-04-25 13:18:40 +00001867 binary image for all clock frequencies. Implement run-time
wdenkc78bf132004-04-24 23:23:30 +00001868 optimization of flash access timing based on the actual bus
1869 frequency.
1870
wdenk20c98a62004-04-23 20:32:05 +00001871* Modify KUP4X board configuration to use SL811 driver for USB memory
1872 sticks (including FAT / VFAT filesystem support)
1873
1874* Add SL811 Host Controller Interface driver for USB
1875
1876* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
1877
1878* Patch by Pantelis Antoniou, 19 Apr 2004:
1879 Allow to use shell style syntax (i. e. ${var} ) with standard parser.
1880 Minor patches for Intracom boards.
1881
1882* Patch by Christian Pell, 19 Apr 2004:
1883 cleanup support for CF/IDE on PCMCIA for PXA25X
1884
wdenke44b9112004-04-18 23:32:11 +00001885* Temporarily disabled John Kerl's extended MII command code because
1886 "miivals.h" is missing
1887
1888* Patches by Mark Jonas, 13 Apr 2004:
1889 - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
1890 - Add sync instructions to IceCube SDRAM init code
1891 - Move SDRAM chip constants into seperate include files
1892 - Unify DDR and SDR initialization code
1893 - Unify all IceCube (Lite5xxx) target names
1894
wdenk61066ec2004-04-18 22:57:51 +00001895* Patch by John Kerl, 16 Apr 2004:
1896 Enable ranges in mii command, e.g. mii read 0-1f 0 or
1897 mii read 4-7 18-1a. Also add mii dump subcommand for
1898 pretty-printing standard regs 0-5.
1899
1900* Patch by Stephen Williams, 16 April 2004:
1901 fix typo in JSE.h; update MAINTAINERS
1902
wdenk19c8fb72004-04-18 22:26:17 +00001903* Patch by Matthew S. McClintock, 14 Apr 2004:
1904 fix initdram function for utx8245 board
1905
1906* Patch by Markus Pietrek, 14 Apr 2004:
1907 use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag
1908
1909* Patch by Reinhard Meyer, 18 Apr 2004:
1910 provide the IDE Reset Function for EMK 5200 boards
1911
1912* Patch by Masami Komiya, 12 Apr 2004:
1913 fix pci_hose_write_config_{byte,word}_via_dword problems
1914
wdenka6270482004-04-18 22:03:42 +00001915* Patch by Sangmoon Kim, 12 Apr 2004:
1916 Update max RAM size for debris board
1917
1918* Patch by Travis Sawyer, 08 Apr 2004:
1919 Add TLB entry for second DIMM slot on ocotea
1920
1921* Patch by Masami Komiya, 08 Apr 2004:
1922 add RTL8169 network driver
1923
wdenk78924a72004-04-18 21:45:42 +00001924* Patch by Dan Malek, 07 Apr 2004:
1925 - Add support for RPC/STx GP3, Motorola 8560 board
1926 - Update 85xx TSEC driver so it searches MII for first available PHY
1927 and uses that one.
1928 - Add functions to support console MII commands.
1929
1930* Patch by Tolunay Orkun, 07 Apr 2004:
wdenka6270482004-04-18 22:03:42 +00001931 Move initialization of bi_iic_fast[]
wdenk78924a72004-04-18 21:45:42 +00001932 from board_init_f() to board_init_r()
1933
1934* Patch by Yasushi Shoji, 07 Apr 2004:
1935 Cleanup microblaze port
1936
1937* Patch by Sangmoon Kim, 07 Apr 2004:
1938 Add auto SDRAM module detection for Debris board
1939
wdenk792c44a2004-04-18 21:17:30 +00001940* Patch by Rune Torgersen, 06 Apr 2004:
1941 - Fix some PCI problems on the MPC8266ADS board
1942 - Fix the location of some PCI entries in the immap structure
1943
wdenk12490652004-04-18 21:13:41 +00001944* Patch by Yasushi Shoji, 07 Apr 2004:
1945 - add support for microblaze processors
1946 - add support for AtmarkTechno "suzaku" board
1947
wdenk8886a662004-04-18 19:43:36 +00001948* Configure PPChameleon board to use redundand environment in flash
1949
1950* Configure PPChameleon board to use JFFS2 NAND support.
1951
1952* Added support for JFFS2 filesystem (read-only) on top of NAND flash
1953
wdenk05939202004-04-18 17:39:38 +00001954* Patch by Rune Torgersen, 16 Apr 2004:
1955 LBA48 fixes
wdenk33591052004-04-12 14:31:43 +00001956
wdenk6203e402004-04-18 10:13:26 +00001957* Patches by Pantelis Antoniou, 16 Apr 2004:
1958 - add support for a new version of an Intracom board and fix
1959 various other things on others.
1960 - add verify support to the crc32 command (define
1961 CONFIG_CRC32_VERIFY to enable it)
1962 - fix FEC driver for MPC8xx systems:
1963 1. fix compilation problems for boards that use dynamic
1964 allocation of DPRAM
1965 2. shut down FEC after network transfers
1966 - HUSH parser fixes:
1967 1. A new test command was added. This is a simplified version of
1968 the one in the bourne shell.
1969 2. A new exit command was added which terminates the current
1970 executing script.
1971 3. Fixed handing of $? (exit code of last executed command)
wdenk05939202004-04-18 17:39:38 +00001972 - Fix some compile problems;
1973 add "once" functionality for the netretry variable
wdenk6203e402004-04-18 10:13:26 +00001974
wdenke5cda752004-04-15 23:23:39 +00001975* Patch by George G. Davis, 02 Apr 2004:
1976 add support for Intel Assabet board
1977
wdenk634d2f72004-04-15 23:14:49 +00001978* Patch by Stephen Williams, 01 Apr 2004:
1979 Add support for Picture Elements JSE board
1980
1981* Patch by Christian Pell, 01 Apr 2004:
1982 Add CompactFlash support for PXA systems.
1983
wdenk3902d702004-04-15 18:22:41 +00001984* Patches by Pantelis Antoniou, 30 Mar 2004:
1985 - add auto-complete support to the U-Boot CLI
1986 - add support for NETTA and NETPHONE boards; fix NETVIA board
wdenk61642172004-04-15 21:16:42 +00001987 - add support for the Epson 156x series of graphical displays
1988 (These displays are serial and not suitable for using a normal
1989 framebuffer console on them)
1990 - add infrastructure needed in order to POST any DSPs in a board
wdenke7047de2004-04-15 21:31:56 +00001991 - improve and fix various things in the MPC8xx FEC driver:
1992 1. The new 87x and 88x series of processors have two FECs,
1993 and the new driver supports them both.
1994 2. Another change in the 87x/88x series is support for
1995 the RMII (Reduced MII) interface. However numerous
1996 changes are needed to make it work since the PHYs
1997 are connected to the same lines. That means that
1998 you have to address them correctly over the MII
1999 interface.
2000 3. We now correctly match the MII/RMII interface
2001 configuration to what the PHY reports.
wdenk145d2c12004-04-15 21:48:45 +00002002 - Fix problem when readingthe MII status register. Due to the
2003 internal design of many PHYs you have to read the register
2004 twice. The problem is more apparent in 10Mbit mode.
2005 - add new mode ".jffs2s" for reading from a NAND device: it just
2006 skips over bad blocks.
2007 - add networking support for VLANs (802.1q), and CDP (Cisco
2008 Discovery Protocol)
wdenk270a8bd2004-04-15 21:58:11 +00002009 - some minor patches / cleanup
wdenk3902d702004-04-15 18:22:41 +00002010
2011* Patch by Yuli Barcohen, 28 Mar 2004:
2012 - Add support for MPC8272 family including MPC8247/8248/8271/8272
2013 - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
2014 - Change configuration method for MPC8260ADS family
2015
wdenk2fb73902004-04-12 16:12:49 +00002016* add startup code to clear the BSS of standalone applications
2017
wdenk33591052004-04-12 14:31:43 +00002018* Fix if / elif handling bug in HUSH shell
2019
2020======================================================================
wdenka9f01392004-04-10 20:44:51 +00002021Changes for U-Boot 1.1.0:
wdenk87249ba2004-01-06 22:38:14 +00002022======================================================================
2023
wdenka09491a2004-04-08 22:31:29 +00002024* Patch by Mark Jonas: Remove config.tmp files only when
2025 unconfiguring the board
2026
2027* Adapt RMU board for bigger flash memory
2028
wdenk65faef92004-03-25 19:29:38 +00002029* Patch by Klaus Heydeck, 13 Mar 2003:
2030 Add support for KUP4X Board
2031
wdenk4d01d9e2004-03-25 14:59:05 +00002032* Patch by Pavel Bartusek, 21 Mar 2004
2033 Add Reiserfs support
2034
2035* Patch by Hinko Kocevar, 20 Mar 2004
2036 - Add auto-release for SMSC LAN91c111 driver
2037 - Add save/restore of PTR and PNR regs as suggested in datasheet
2038
wdenkeec9a3d2004-03-23 23:20:24 +00002039* Patch by Stephen Williams, 19 March 2004
2040 Increase speed of sector reads from SystemACE,
2041 shorten poll timeout and remove a useless reset
2042
2043* Patch by Tolunay Orkun, 19 Mar 2004:
2044 Make GigE PHY 1000Mbps Speed/Duplex detection conditional
2045 (CONFIG_PHY_GIGE)
2046
2047* Patch by Brad Kemp, 18 Mar 2004:
2048 prevent machine checks during a PCI scan
2049
2050* Patch by Pierre Aubert, 18 Mar 2004:
2051 Fix string cleaning in IDE identification
2052
wdenkaea86e42004-03-23 22:53:55 +00002053* Patch by Pierre Aubert, 18 Mar 2004:
2054 - Unify video mode handling for Chips & Technologies 69000 Video
2055 chip and Silicon Motion SMI 712/710/810 Video chip
2056 - Add selection of the video output (CRT or LCD) via 'videoout'
2057 environment variable for the Silicon Motion
2058 - README update
2059
2060* Patch by Pierre Aubert, 18 Mar 2004:
2061 include/common.h typo fix
2062
2063* Patches by Tolunay Orkun, 17 Mar 2004:
2064 - Add support for bd->bi_iic_fast[] initialization via environment
2065 variable "i2cfast" (CONFIG_I2CFAST)
2066 - Add "i2cfast" u-boot environment variable support for csb272
2067
wdenk8d4d1f62004-03-23 22:37:33 +00002068* Patch by Carl Riechers, 17 Mar 2004:
2069 Ignore '\0' characters in console input for use with telnet and
2070 telco pads.
2071
2072* Patch by Leon Kukovec, 17 Mar 2004:
2073 typo fix for strswab prototype #ifdef
2074
wdenk42c05472004-03-23 22:14:11 +00002075* Patches by Thomas Viehweger, 16 Mar 2004:
2076 - show PCI clock frequency on MPC8260 systems
2077 - add FCC_PSMR_RMII flag for HiP7 processors
2078 - in do_jffs2_fsload(), take load address from load_addr if not set
2079 explicit, update load_addr otherwise
2080 - replaced printf by putc/puts when no formatting is needed
2081 (smaller code size, faster execution)
2082
wdenkf16b5162004-03-23 21:43:07 +00002083* Patch by Phillippe Robin, 16 Mar 2004:
2084 avoid dereferencing NULL pointer in lib_arm/armlinux.c
2085
2086* Patch by Stephen Williams, 15 Mar 2004:
2087 Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation
2088
2089* Patch by Tolunay Orkun, 15 Mar 2004:
2090 Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()
2091
2092* Patch by Travis Sawyer, 15 Mar 2004:
2093 Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port
2094
wdenkc12081a2004-03-23 20:18:25 +00002095* Add start-up delay to make sure power has stabilized before
2096 attempting to switch on USB on SX1 board.
2097
2098* Patch by Josef Wagner, 18 Mar 2004:
2099 - Add support for MicroSys XM250 board (PXA255)
2100 - Add support for MicroSys PM828 board (MPC8280)
2101 - Add support for 32 MB Flash on PM825/826
2102 - new SDRAM refresh rate for PM825/PM826
2103 - added support for MicroSys PM520 (MPC5200)
2104 - replaced Query by Identify command in CPU86/flash.c
2105 to support 28F160F3B
2106
2107* Fix wrap around problem with udelay() on ARM920T
2108
2109* Add support for Macronix flash on TRAB board
2110
wdenk18bd81e2004-03-17 01:13:07 +00002111* Patch by Pierre Aubert, 15 Mar 2004:
2112 Fix buffer overflow in IDE identification
2113
2114* Fix power-off of LCD for out-of-band temperatures on LWMON board
2115
2116* Remove redundand #define in IceCube.h
2117
wdenk0ef49462004-03-15 09:00:01 +00002118* Patch by Steven Scholz, 27 Feb 2004:
2119 - Adding get_ticks() and get_tbclk() for AT91RM9200
2120 - Many white space fixes in cpu/at91rm9200/interrupts.c
2121
2122* Patches by Steven Scholz, 20 Feb 2004:
2123 some cleanup in AT91RM9200 related code
2124
wdenked2ac4b2004-03-14 18:23:55 +00002125* Patches by Travis Sawyer, 12 Mar 2004:
2126 - Fix Gigabit Ethernet support for 440GX
2127 - Add Gigabit Ethernet Support to MII PHY utilities
2128
2129* Patch by Brad Kemp, 12 Mar 2004:
2130 Fixes for drivers/cfi_flash.c:
2131 - Better support for x8/x16 implementations
2132 - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
2133 - Added defines for AMD command and address constants
2134
2135* Patch by Leon Kukovec, 12 Mar 2004:
2136 Fix get_dentfromdir() to correctly handle deleted dentries
wdenkc35ba4e2004-03-14 22:25:36 +00002137
wdenked2ac4b2004-03-14 18:23:55 +00002138* Patch by George G. Davis, 11 Mar 2004:
2139 Remove hard coded network settings in TI OMAP1610 H2
2140 default board config
2141
2142* Patch by George G. Davis, 11 Mar 2004:
2143 add support for ADS GraphicsClient+ board.
2144
wdenk18bd81e2004-03-17 01:13:07 +00002145* Patch by Pierre Aubert, 11 Mar 2004:
wdenke55402c2004-03-14 16:51:43 +00002146 - add bitmap command and splash screen support in cfb console
2147 - add [optional] origin in the bitmap display command
2148
2149* Patch by Travis Sawyer, 11 Mar 2004:
2150 Fix ocotea board early init interrupt setup.
2151
2152* Patch by Thomas Viehweger, 11 Mar 2004:
2153 Remove redundand code; add PCI-specific bits to include/mpc8260.h
2154
wdenke28cf632004-03-14 15:20:55 +00002155* Patch by Stephan Linz, 09 Mar 2004
2156 - Add support for the SSV ADNP/ESC1 (Nios Softcore)
2157
2158* Patch by George G. Davis, 9 Mar 2004:
2159 fix recent build failure for SA1100 target
2160
2161* Patch by Travis Sawyer, 09 Mar 2004:
2162 Support native interrupt mode for the IBM440GX.
2163 Previously it was running in 440GP compatibility mode.
2164
wdenk4989f872004-03-14 15:06:13 +00002165* Patch by Philippe Robin, 09 Mar 2004:
2166 Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
2167 Platform support.
2168
2169* Patch by Masami Komiya, 08 Mar 2004:
2170 Don't overwrite server IP address or boot file name
2171 when the boot server does not return values
2172
wdenk18bd81e2004-03-17 01:13:07 +00002173* Patch by Tolunay Orkun, 5 Mar 2004:
wdenk4989f872004-03-14 15:06:13 +00002174 Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
2175
wdenk369d43d2004-03-14 14:09:05 +00002176* Patch by Tolunay Orkun, 5 Mar 2004:
2177 Fix early board initialization for Cogent CSB272 board
2178
2179* Patch by Ed Okerson, 3 Mar 2004:
2180 fix CFI flash writes for little endian systems
2181
2182* Patch by Reinhard Meyer, 01 Mar 2004:
2183 generalize USB and IDE support for MPC5200 with according
2184 changes to IceCube.h and TOP5200.h
2185 add Am29LV256 256 MBit FLASH support for TOP5200 boards
2186 add info about USB and IDE to README
2187
wdenkacd9b102004-03-14 00:59:59 +00002188* Patch by Yuli Barcohen, 4 Mar 2004:
2189 Fix problems with GCC 3.3.x which changed handling of global
2190 variables explicitly initialized to zero (now in .bss instead of
2191 .data as before).
2192
2193* Patch by Leon Kukovec, 02 Mar 2004:
2194 add strswab() to fix IDE LBA capacity, firmware and model numbers
2195 on little endian machines
2196
2197* Patch by Masami Komiya, 02 Mar 2004:
2198 - Remove get_ticks() from NFS code
2199 - Add verification of RPC transaction ID
2200
2201* Patch by Pierre Aubert, 02 Mar 2004:
2202 cleanup for IDE and USB drivers for MPC5200
2203
2204* Patch by Travis Sawyer, 01 Mar 2004:
wdenk00fe1612004-03-14 00:07:33 +00002205 Ocotea:
2206 - Add IBM PPC440GX Ref Platform support (Ocotea)
2207 Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
2208 Adapted to U-Boot and 440GX port
2209 440gx_enet.c:
2210 - Add gracious handling of all Ethernet Pin Selections for 440GX
2211 - Add RGMII selection for Cicada CIS8201 Gigabit PHY
2212 ppc440.h:
2213 - Add needed bit definitions
2214 - Fix formatting
2215
2216* Patch by Carl Riechers, 1 Mar 2004:
2217 Add PPC440GX prbdv0 divider to fix memory clock calculation.
2218
2219* Patch by Stephan Linz, 27 Feb 2004
2220 - avoid problems for targets without NFS download support
2221
wdenkf602aa02004-03-13 23:29:43 +00002222* Patch by Rune Torgersen, 27 Feb 2004:
2223 - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
2224 - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
2225 - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
2226
2227* Patch by Masami Komiya, 27 Feb 2004:
2228 Fix rarpboot: add autoload by NFS
2229
2230* Patch by Dan Eisenhut, 26 Feb 2004:
2231 fix flash_write return value in saveenv
2232
2233* Patch by Stephan Linz, 11 Dec 2003
2234 expand config.mk to avoid trigraph warnings on NIOS
2235
2236* Rename "BMS2003" board into "HMI10"
2237
wdenk05822bf2004-03-12 15:38:25 +00002238* SX1 patches: use "serial#" for USB serial #; use redundand environment
2239 storage; auto-set console on USB port (using preboot command)
2240
wdenk29e7f5a2004-03-12 00:14:09 +00002241* Add support for SX1 mobile phone; add support for USB-based console
2242 (enable with "setenv stdout usbtty; setenv stdin usbtty")
2243
wdenk0a12b752004-03-11 22:46:36 +00002244* Fix LOWBOOT configuration for MPC5200 with DDR memory
2245
wdenk0e2874cb2004-03-02 14:05:39 +00002246* Fix SDRAM timings for LITE5200 / IceCube board
2247
2248* Handle Auti-MDIX / connection status for INCA-IP
2249
2250* Fix USB problems when attempting to read 0 bytes
2251
wdenk372f0302004-02-27 08:21:54 +00002252* Patch by Travis Sawyer, 26 Feb 2004:
2253 Fix broken compile for XPEDITE1K target.
2254
2255* Patch by Stephan Linz, 26 Feb 2004:
2256 Bug fix for NFS code on NIOS targets
wdenk29e7f5a2004-03-12 00:14:09 +00002257
wdenk372f0302004-02-27 08:21:54 +00002258* Patch by Stephen Williams, 26 Feb 2004:
2259 Break up SystemACE reads of large block counts
2260
wdenk6ea1cf02004-02-27 08:20:54 +00002261* Patch by Pierre Aubert, 26 Feb 2004
2262 add IDE support for MPC5200
2263
2264* Patch by Masami Komiya, 26 Feb 2004:
2265 add autoload via NFS
2266
2267* Patch by Stephen Williams
2268 Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
2269 elsewhere in the source.
2270
wdenkd729d302004-02-27 00:07:27 +00002271* Patch by Steven Scholz, 25 Feb 2004:
2272 - Timeouts in FPGA code should be based on CFG_HZ
2273 - Minor cleanup in code for Altera FPGA ACEX1K
2274
2275* Patch by Steven Scholz, 25 Feb 2004:
2276 Changed "Directory Hierarchy" section in README
2277
2278* Patch by Masami Komiya, 25 Feb 2004:
2279 Reduce copy count in nfs_read_reply() of NFS code
2280
wdenk5f495752004-02-26 23:46:20 +00002281* Patch by Markus Pietrek, 24 Feb 2004:
2282 NS9750 DevBoard added
2283
wdenk6ea1cf02004-02-27 08:20:54 +00002284* Patch by Pierre Aubert, 24 Feb 2004
wdenk5f495752004-02-26 23:46:20 +00002285 add USB support for MPC5200
2286
2287* Patch by Steven Scholz, 24 Feb 2004:
2288 - fix MII commands to use values from last command
2289
2290* Patch by Torsten Demke, 24 Feb 2004:
2291 Add support for the eXalion platform (SPSW-8240, F-30, F-300)
2292
wdenkdb82c8e2004-02-26 23:01:04 +00002293* Patch by Rahul Shanbhag, 19 Feb 2004:
2294 Fixes for for OMAP1610 board:
2295 - shift some IRQ specific code to platform.S file
2296 - remove duplicatewatchdog reset code from start.S
2297
2298* Make Auto-MDIX Support configurable on INCA-IP board
2299
2300* Fix license for mkimage tool
2301
wdenk77ef4c62004-02-24 22:33:21 +00002302* Patch by Masami Komiya, 24 Feb 2004:
2303 Update NetBootFileXferSize in NFS code
2304
2305* Patch by Scott McNutt, 24 Feb 2004:
2306 fix packet length in NFS code
2307
wdenkbe9c1cb2004-02-24 02:00:03 +00002308* Patch by Masami Komiy, 22 Feb 2004:
2309 Add support for NFS for file download
2310
wdenkb98ac282004-02-24 00:16:43 +00002311* Patch by Andrea Scian, 17 Feb 2004:
2312 Add support for S3C44B0 processor and DAVE B2 board
2313
2314* Patch by Steven Scholz, 20 Feb 2004:
2315 - Add support for MII commands on AT91RM9200 boards
2316 - some cleanup in AT91RM9200 ethernet code
2317
wdenke537b3b2004-02-23 23:54:43 +00002318* Patch by Peter Ryser, 20 Feb 2004:
2319 Add support for the Xilinx ML300 platform
2320
2321* Patch by Stephan Linz, 17 Feb 2004:
2322 Fix watchdog support for NIOS
2323
2324* Patch by Josh Fryman, 16 Feb 2004:
2325 Fix byte-swapping for cfi_flash.c for different bus widths
2326
2327* Patch by Jon Diekema, 14 Jeb 2004:
2328 Remove duplicate "FPGA Support" notes from the README file
2329
wdenke97d3d92004-02-23 22:22:28 +00002330* Patches by Reinhard Meyer, 14 Feb 2004:
2331 - update board/emk tree; use common flash driver
2332 - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
2333 [adapted for other PPC CPUs -- wd]
2334 - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
2335
2336* Patch by Jon Diekema, 13 Feb 2004:
2337 Call show_boot_progress() whenever POST "FAILED" is printed.
2338
2339* Patch by Nishant Kamat, 13 Feb 2004:
2340 Add support for TI OMAP1610 H2 Board
2341 Fixes for cpu/arm926ejs/interrupt.c
2342 (based on Richard Woodruff's patch for arm925, 16 Oct 03)
2343 Fix for a timer bug in OMAP1610 Innovator
2344 Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
2345
2346* Patches by Stephan Linz, 12 Feb 2004:
2347 - add support for NIOS timer with variable period preload counter value
2348 - prepare POST framework support for NIOS targets
2349
2350* Patch by Denis Peter, 11 Feb 2004:
2351 add POST support for the MIP405 board
2352
wdenkf70cbb22004-02-23 20:48:38 +00002353* Patch by Laurent Mohin, 10 Feb 2004:
2354 Fix buffer overflow in common/usb.c
2355
2356* Patch by Tolunay Orkun, 10 Feb 2004:
2357 Add support for Cogent CSB272 board
2358
wdenk2ebee312004-02-23 19:30:57 +00002359* Patch by Thomas Elste, 10 Feb 2004:
2360 Add support for NET+50 CPU and ModNET50 board
2361
2362* Patch by Sam Song, 10 Feb 2004:
2363 Fix typos in cfi_flash.c
2364
2365* Patch by Leon Kukovec, 10 Feb 2004
2366 Fixed long dir entry slot id calculation in get_vfatname
2367
2368* Patch by Robin Gilks, 10 Feb 2004:
2369 add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
2370 !=, <>, <, >, <=, >=)
2371
wdenkef893942004-02-23 16:11:30 +00002372* Fix problem with side effects in macros in include/usb.h
2373
2374* Patch by David Benson, 13 Nov 2003:
2375 bug 841358 - fix TFTP download size limit
2376
2377* Fixing bug 850768:
2378 improper flush_cache() in load_serial()
2379
2380* Fixing bug 834943:
2381 MPC8540 - missing volatile declarations
2382
2383* Patch by Stephen Williams, 09 Feb 2004:
2384 Add support for Xilinx SystemACE chip:
2385 - New files common/cmd_ace.c and include/systemace.h
2386 - Hook systemace support into cmd_fat and the partition manager
2387
2388* Patch by Travis Sawyer, 09 Feb 2004:
2389 Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
2390
wdenk56ed43e2004-02-22 23:46:08 +00002391* Patch by Travis Sawyer, 09 Feb 2004:
2392 o 440GX:
2393 - Fix PCI Indirect access for type 1 config cycles with ppc440.
2394 - Add phymode for 440 enet
2395 - fix pci pre init
2396 o XPedite1K:
2397 - Change board_pre_init to board_early_init_f
2398 - Add user flash to bus controller setup
2399 - Fix pci pre init
2400 - Fix is_pci_host to check GPIO for monarch bit
2401 - Force xpedite1k to pci conventional mode (via #define option)
2402
2403* Patch by Brad Kemp, 4 Feb 2004:
2404 - handle the machine check that is generated during the PCI scans
2405 on 82xx processors.
2406 - define the registers used in the IMMR by the PCI subsystem.
2407
2408* Patch by Pierre Aubert, 03 Feb 2004:
2409 cpu/mpc5xxx/start.S: copy MBAR into SPR311
2410
2411* Patch by Jeff Angielski, 03 Feb 2004:
2412 Fix copy & paste error in cpu/mpc8260/pci.c
2413
2414* Patch by Reinhard Meyer, 24 Jan 2004:
2415 Fix typo in cpu/mpc5xxx/pci_mpc5200.c
2416
wdenk4dd56e52004-02-20 22:02:48 +00002417* Add Auto-MDIX support for INCA-IP
2418
wdenke65527f2004-02-12 00:47:09 +00002419* Some code cleanup
2420
2421* Patch by Josef Baumgartner, 10 Feb 2004:
2422 Fixes for Coldfire port
2423
2424* Patch by Brad Kemp, 11 Feb 2004:
2425 Fix CFI flash driver problems
2426
wdenk88d73b52004-02-11 21:35:18 +00002427* Make sure to use a bus clock divider of 2 only when running TQM8xxM
2428 modules at CPU clock frequencies above 66 MHz.
wdenke65527f2004-02-12 00:47:09 +00002429
wdenk88d73b52004-02-11 21:35:18 +00002430* Optimize flash programming speed for LWMON (by another 100% :-)
2431
wdenk6cfa84e2004-02-10 00:03:41 +00002432* Patch by Jian Zhang, 3 Feb 2004:
2433 - Changed the incorrect FAT12BUFSIZE
2434 - data_begin in fsdata can be negative. Changed it to be short.
2435
wdenkc0bc2e12004-02-09 23:12:24 +00002436* Patches by Stephan Linz, 30 Jan 2004:
2437 1: - board/altera/common/flash.c:flash_erase():
2438 o allow interrupts befor get_timer() call
2439 o check-up each erased sector and avoid unexpected timeouts
2440 - board/altera/dk1c20/dk1s10.c:board_early_init_f():
2441 o enclose sevenseg_set() in cpp condition
2442 - remove the ASMI configuration for DK1S10_standard_32 (never present)
2443 - fix some typed in mistakes in the NIOS documentation
2444 2: - split DK1C20 configuration into several header files:
2445 o two new files for each NIOS CPU description
2446 o U-Boot related part is remaining in DK1C20.h
2447 3: - split DK1S10 configuration into several header files:
2448 o two new files for each NIOS CPU description
2449 o U-Boot related part is remaining in DK1S10.h
2450 4: - Add support for the Microtronix Linux Development Kit
2451 NIOS CPU configuration at the Altera Nios Development Kit,
2452 Stratix Edition (DK-1S10)
2453 5: - Add documentation for the Altera Nios Development Kit,
2454 Stratix Edition (DK-1S10)
2455 6: - Add support for the Nios Serial Peripharel Interface (SPI)
2456 (master only)
2457 7: - Add support for the common U-Boot SPI framework at
2458 RTC driver DS1306
2459
wdenkca262162004-02-09 20:51:26 +00002460* Patch by Rahul Shanbhag, 28 Jan 2004:
2461 Fix flash protection/locking handling for OMAP1610 innovator board.
2462
2463* Patch by Rolf Peukert, 28 Jan 2004:
2464 fix flash write problems on CSB226 board (write with 32 bit bus width)
2465
2466* Patches by Mark Jonas, 16 Jan 2004:
2467 - fix rounding error when calculating baudrates for MPC5200 PSCs
2468 - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
2469 time which is not supported
2470
wdenk2cefd152004-02-08 22:55:38 +00002471* Patch by Yuli Barcohen, 26 Jan 2004:
2472 Allow bzip2 compression for small memory footprint boards
2473
2474* Patch by Brad Kemp, 21 Jan 2004:
2475 Add support for CFI flash driver for both the Intel and the AMD
2476 command sets.
2477
2478* Patch by Travis Sawyer, 20 Jan 2004:
2479 Fix pci bridge auto enumeration of sibling p2p bridges.
2480
2481* Patch by Tolunay Orkun, 12 Jan 2004:
2482 Add some delays as needed for Intel LXT971A PHY support
2483
2484* Patches by Stephan Linz, 09 Jan 2004:
2485 - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
2486 - make DK1C20 board configuration related to ASMI conform to
2487 documentation
2488
wdenk927034e2004-02-08 19:38:38 +00002489* Patch by Anders Larsen, 09 Jan 2004:
2490
2491 ARM memory layout fixes: the abort-stack is now set up in the
2492 correct RAM area, and the BSS is zeroed out as it should be.
2493
2494 Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
2495 of the linker scripts are replaced by '__bss_start' and '_end',
2496 resp., which is a further step to eliminate unnecessary differences
2497 between the implementation of the CPU architectures.
2498
wdenk5401de42004-02-07 01:27:10 +00002499* Patch by liang a lei, 9 Jan 2004:
2500 Fix Intel 28F128J3 ID in include/flash.h
2501
2502* Patch by Masami Komiya, 09 Jan 2004:
2503 add support for TB0229 board (NEC VR4131 MIPS processor)
2504
2505* Patch by Leon Kukovec, 12 Dec 2003:
2506 changed extern __inline__ into static __inline__ in
2507 include/linux/byteorder/swab.h
2508
wdenk544e9732004-02-06 23:19:44 +00002509* Patch by Travis Sawyer, 30 Dec 2003:
2510 Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
2511 select MDI port based on enabled EMAC device.
2512 Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
2513 base PrPMC board.
2514
wdenk4b6e9052004-02-06 21:48:22 +00002515* Patch by Wolter Kamphuis, 15 Dec 2003:
2516 made CONFIG_SILENT_CONSOLE usable on all architectures
2517
2518* Disable date command on TQM866M - there is no RTC on MPC866
2519
wdenkfde37042004-01-31 20:06:54 +00002520* Fix variable CPU clock for MPC859/866 systems for low CPU clocks
2521
wdenk433feff2004-01-29 09:22:58 +00002522* Implement adaptive SDRAM timing configuration based on actual CPU
2523 clock frequency for INCA-IP; fix problem with board hanging when
2524 switching from 150MHz to 100MHz
2525
2526* Add PCMCIA CS support for BMS2003 board
2527
wdenkb50cde52004-01-24 20:25:54 +00002528* Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
2529 see doc/README.MPC866 for details;
2530 implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
2531 calculate CPU clock frequency from PLL register values.
2532
2533* Add support for 128 MB RAM on TQM8xxL/M modules
2534
wdenk398eeff2004-01-21 20:46:28 +00002535* Fix PS/2 keyboard problem caused by statically initialized variable
2536 pointing to a location in flash
2537
2538* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
2539
wdenkda55c6e2004-01-20 23:12:12 +00002540* The PS/2 mux on the BMS2003 board needs 450 ms after power on
2541 before we can access it; add delay in case we are faster (with no
2542 CF card inserted)
2543
2544* Cleanup of some init functions
2545
2546* Make sure SCC Ethernet is always stopped by the time we boot Linux
2547 to avoid Linux crashes by early packets coming in.
2548
2549* Accelerate flash accesses on LWMON board by using buffered writes
2550
wdenk2b80ae52004-01-18 18:21:54 +00002551* Fix typo in Makefile;
2552 fix problem with PARTNUM detection
2553
wdenkb983fa22004-01-16 00:30:56 +00002554* Patch by Reinhard Meyer, 09 Jan 2004:
2555 - add RTC support for MPC5200 based boards (requires RTC_XTAL)
2556
2557* Add support for IDE LED on BMS2003 board
2558 (exclusive with status LED!)
2559
2560* Add support for PS/2 keyboard (used with PS/2 multiplexor on
2561 BMS2003 board)
2562
2563* Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
2564 Add common files for "emk" boards
2565
wdenk87249ba2004-01-06 22:38:14 +00002566* Add a common get_ram_size() function and modify the the
2567 board-specific files to invoke that common implementation.
2568
2569======================================================================
wdenk7c699672004-01-06 11:13:56 +00002570Changes for U-Boot 1.0.1:
wdenk4b16c2e2003-11-07 13:42:26 +00002571======================================================================
2572
wdenk7c699672004-01-06 11:13:56 +00002573* Set default clock for INCA-IP to 150 MHz
2574
wdenk2f99a692004-01-04 22:51:12 +00002575* Make BMS2003 use a separate config file to avoid #ifdef mess;
2576 add I2C support; add support for DS1337 RTC
2577
2578* Add CompactFlash support for BMS2003 board
2579
2580* Add support for status LED on BMS2003 board
2581
wdenkad276f22004-01-04 16:28:35 +00002582* Patch by Scott McNutt, 02 Jan 2004:
2583 Add support for the Nios Active Serial Memory Interface (ASMI)
2584 on Cyclone devices
2585
2586* Patch by Andrea Marson, 16 Dec 2003:
2587 Add support for the PPChameleon ME and HI modules
2588
2589* Patch by Yuli Barcohen, 22 Dec 2003:
2590 Add support for Motorola DUET ADS board (MPC87x/88x)
2591
wdenkae65f502004-01-03 21:24:46 +00002592* Patch by Robert Schwebel, 15 Dec 2003:
2593 add support for cramfs (uses JFFS2 command interface)
2594
wdenk3be717f2004-01-03 19:43:48 +00002595* Patches by Stephan Linz, 11 Dec 2003:
2596 - more documentation for NIOS port
2597 - new struct nios_pio_t, struct nios_spi_t
2598 - Reconfiguration for NIOS Development Kit DK1C20:
2599 o move board related code from board/dk1c20
2600 to board/altera/dk1c20
2601 o create a new common source path board/altera/common
2602 and move generic flash access stuff into it
2603 o change/expand configuration file DK1C20.h
2604 - Add support for NIOS Development Kit DK1S10
2605 - Add status LED support for NIOS systems
2606 - Add dual 7-segment LED support for Altera NIOS DevKits
2607
wdenk5da7f2f2004-01-03 00:43:19 +00002608* Patch by Ronen Shitrit, 10 Dec 2003:
2609 Add support for the Marvell DB64360 / DB64460 development boards
2610
2611* Patch by Detlev Zundel, 10 Dec 2003:
2612 fix dependency problem in examples/Makefile
2613
wdenkbc01dd52004-01-02 16:05:07 +00002614* Patch by Denis Peter, 8 Dec 2003
2615 - add support for the PATI board (MPC555)
2616 - add SPI support for the MPC5xx
2617
2618* Patch by Anders Larsen, 08 Dec 2003:
2619 add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
2620 to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
2621 cleanup some redundand #defines
2622
wdenk0260cd62004-01-02 15:01:32 +00002623* Patch by André Schwarz, 8 Dec 2003:
2624 fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
2625 - TX and RX deskriptors must be quad-word aligned
2626 - does not work with only one TX deskriptor
2627 - standard reset method does not work
2628
2629* Patch by Masami Komiya, 08 Dec 2003:
2630 add RTL8139 ethernet driver
2631
2632* Patches by Ed Okerson, 07 Dec 2003:
2633 - fix ethernet for the AU1x00 processors in little-endian mode.
2634 - extend memsetup.S for the AU1x00 processors in BE and LE modes
2635
wdenk1ebf41e2004-01-02 14:00:00 +00002636* Minor code cleanup (coding style)
2637
2638* Patch by Reinhard Meyer, 30 Dec 2003:
2639 - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
2640 - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
2641 - turned debug print of PHY registers into a function (called in two places)
2642 - added support for EMK MPC5200 based modules
2643
2644* Fix MPC8xx PLPRCR_MFD_SHIFT typo
2645
2646* Add support for TQM866M modules
2647
2648* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
2649
2650* Fix a few compiler warnings
2651
wdenk78e3ab32003-12-28 11:44:59 +00002652* Patch by Reinhard Meyer, 28 Dec 2003:
2653 Add initial support for TOP5200 board
2654
wdenk67f13362003-12-27 19:24:54 +00002655* Make CPU clock on ICA-IP board controllable by a "cpuclk"
2656 environment variable which can set to "100", "133", or "150". The
2657 CPU clock will be configured accordingly upon next reboot. Other
2658 values are ignored. In case of an invalid or undefined "cpuclk"
2659 value, the compile-time default CPU clock speed will be used.
2660
2661* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
2662 window that is used to access the UART registers by the Linux driver)
2663
2664* Patch by Reinhard Meyer, 20 Dec 2003:
2665 Fix clock calculation for the MPC5200 for higher clock frequencies
2666 (above 2**32 / 10 = 429.5 MHz).
2667
2668* Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
2669
wdenk236d3fc2003-12-20 22:45:10 +00002670* Fix IceCube CLKIN configuration (it's 33.000000MHz)
2671
2672* Add new configuration for IceCube board with DDR memory
2673
2674* Update TRAB memory configurations
2675
wdenkdf28aa02003-12-12 00:02:26 +00002676* Add JFFS2 support for INCA-IP board
2677
stroese9c470352003-12-09 15:04:55 +00002678* Patch by Bill Hargen, 09 Dec 2003:
2679 - BUBINGA405EP: changed flash driver to protect top sector containing
2680 first instruction.
2681 - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
2682 - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
2683 - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
2684 - 405EP: added/fixed support for "reginfo" command.
2685 - 4xx: removed spurious MII error messages on "mii info" command.
2686
wdenkabf7a7c2003-12-08 01:34:36 +00002687* Patch by Bernhard Kuhn, 28 Nov 2003:
2688 add support for Coldfire CPU
2689 add support for Motorola M5272C3 and M5282EVB boards
2690
wdenk7f00b942003-12-07 23:55:12 +00002691* Patch by Pierre Aubert, 24 Nov 2003:
2692 - add a return value for the fpga command
2693 - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
2694 is defined. If ide_preinit fails, ide_init is aborted.
2695 - fix an endianess problem in fat.h
2696
wdenk174e0e52003-12-07 22:27:15 +00002697* Patch by Wolter Kamphuis, 05 Dec 2003:
2698 Add support for SNMC's QS850/QS823/QS860T boards
2699
wdenk444f22b2003-12-07 21:39:28 +00002700* Patch by Yuli Barcohen, 3 Dec 2003:
2701 "revive" U-Boot support for old Motorola MPC860ADS board
2702
2703* Patch by Cam(ilo?), 03 Dec 2003:
2704 make examples build even with broken Montavista objcopy
2705
2706* Patch by Pavel Bartusek, 27 Nov 2003:
2707 fix conversion problem with "bootretry" evironment variable
2708
wdenk4e7a58a2003-12-07 19:24:00 +00002709* Patch by Andre Schwarz, 24 Nov 2003:
2710 add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
2711
2712* Patch by Pavel Bartusek, 21 Nov 2003:
2713 set ZMII bridge speed on 440
2714
2715* Patch by Anders Larsen, 17 Nov 2003:
2716 Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
2717
wdenk4ea537d2003-12-07 18:32:37 +00002718* Patches by David Müller, 14 Nov 2003:
2719 - board/mpl/common/common_util.c
2720 * implement support for BZIP2 compressed images
2721 * various cleanups (printf -> puts, ...)
2722 - board/mpl/common/flash.c
2723 * report correct errors to upper layers
2724 * check the erase fail and VPP low bits in status reg
2725 - board/mpl/vcma9/cmd_vcma9.c
2726 - board/mpl/vcma9/flash.c
2727 * various cleanups (printf -> puts, ...)
2728 - common/cmd_usb.c
2729 * fix typo in comment
2730 - cpu/arm920t/usb_ohci.c
2731 * support for S3C2410 is missing in #if line
2732 - drivers/cs8900.c
2733 * reinit some registers in case of error (cable missing, ...)
2734 - fs/fat/fat.c
2735 * support for USB/MMC devices is missing in #if line
2736 - include/configs/MIP405.h
2737 - include/configs/PIP405.h
2738 * enable BZIP2 support
2739 * enlarge malloc space to 1MiB because of BZIP2 support
2740 - include/configs/VCMA9.h
2741 * enable BZIP2 support
2742 * enlarge malloc space to 1MiB because of BZIP2 support
2743 * enable USB support
2744 - lib_arm/armlinux.c
2745 * change calling convention of ARM Linux kernel as
2746 described on http://www.arm.linux.org.uk/developer/booting.php
2747
2748* Patch by Thomas Lange, 14 Nov 2003:
2749 Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
2750 support all these AMD boards.
2751
2752* Patch by Thomas Lange, 14 Nov 2003:
2753 Workaround for mips au1x00 physical memory accesses (the au1x00
2754 uses a 36 bit bus internally and cannot access physical memory
2755 directly. Use the uncached SDRAM address instead of the physical
2756 one.)
2757
wdenk5d5317e2003-12-07 00:46:27 +00002758* Patch by Xue Ligong (Joe), 13 Nov 2003:
2759 add Realtek 8019 ethernet driver
2760
2761* Patch by Yuli Barcohen, 13 Nov 2003:
2762 MPC826xADS/PQ2FADS cleanup
2763
2764* Patch by Anders Larsen, 12 Nov 2003:
2765 Update README to mark the PORTIO commands non-standard
2766
wdenk86765902003-12-06 23:55:10 +00002767* Patch by Nicolas Lacressonnière, 12 Nov 2003:
2768 update for for Atmel AT91RM9200DK development kit:
2769 - support for environment variables in DataFlash
2770 - Atmel DataFlash AT45DB1282 support
2771
2772* Patch by Jeff Carr, 11 Nov 2003:
2773 add support for new version of 8270 processors
2774
2775* Patches by George G. Davis, 05 Nov 2003:
2776 - only pass the ARM linux initrd tag to the kernel when an initrd
2777 is actually present
2778 - update omap1510inn configuration file
2779
wdenkf4cec3f2003-12-06 23:20:41 +00002780* Patches by Stephan Linz, 3 Nov 2003:
2781 - more endianess fixes for LAN91C111 driver
2782 - CFG_HZ configuration patch for NIOS Cyclone board
2783
2784* Patch by Stephan Linz, 28 Oct 2003:
2785 fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
2786
2787* Patch by Steven Scholz, 20 Oct 2003:
2788 - make "mii info <addr>" show infor for PHY at "addr" only
2789 - Endian fix for miiphy_info()
2790
wdenkc0aa5c52003-12-06 19:49:23 +00002791* Patch by Gleb Natapov, 19 Sep 2003:
2792 Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
2793
2794* Patch by Anders Larsen, 17 Sep 2003:
2795 Bring ARM memory layout in sync with the documentation:
2796 stack and malloc-heap are now located _below_ the U-Boot code
2797
wdenk768844e2003-12-06 11:20:01 +00002798* Accelerate booting on TRAB board: read and check autoupdate image
2799 headers first instead of always reading the whole images.
2800
wdenk1ae251b2003-12-05 21:08:38 +00002801* Fix type in MPC5XXX code (pointed out by Victor Wren)
2802
wdenk78ae91f2003-12-03 23:53:42 +00002803* Enabled password check on RMU board
2804
2805* Fix configuration problem with IceCube in LOWBOOT configuration:
2806 envrionment got embedded, corrupting the image layout.
2807
2808* Fix NEC display names (it's 6440 [for 640x480], not 6640).
2809
wdenkc0d54ae2003-11-25 16:55:19 +00002810* Added BMS2003 board
2811 add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
2812
wdenk9a1ff302003-11-17 21:45:27 +00002813* Fix flash driver for TRAB board (must use Unlock Bypass Reset
2814 command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
2815 and CPLD
2816
wdenkc6abb7e2003-11-17 21:14:37 +00002817* Use "-fPIC" instead of "-mrelocatable" to prevent problems with
2818 recent tools
2819
2820* Add checksum verification to 'imls' command
2821
2822* Add bd_info fields needed for 4xx Linux I2C driver
2823
2824* Patch by Martin Krause, 4 Nov. 2003:
2825 Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
2826
2827* Print used network interface when CONFIG_NET_MULTI is set
2828
wdenk4b16c2e2003-11-07 13:42:26 +00002829* Patch by Bernhard Kuhn, 28 Oct 2003:
2830 Add low boot support for MPC5200
2831
2832* Fix problem with dual PCMCIA support (NSCU)
2833
2834* Fix MPC5200 I2C initialization function
2835
2836======================================================================
wdenk934c4f82003-09-11 19:48:06 +00002837Changes for U-Boot 1.0.0:
2838======================================================================
2839
wdenk655a0f92003-10-30 21:49:38 +00002840* Fix parameter passing to standalone images with bootm command
2841
2842* Patch by Kyle Harris, 30 Oct 2003:
2843 Fix build errors for ixdp425 board
2844
2845* Patch by David M. Horn, 29 Oct 2003:
2846 Fixes to build under CYGWIN
2847
2848* Get IceCube MGT5100 working (again)
2849
wdenkb6c60cb32003-10-29 23:18:55 +00002850* Fix problems in memory test on some boards (which was not
2851 non-destructive as intended)
2852
2853* Patch by Gary Jennejohn, 28 Oct 2003:
2854 Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
2855 to prevent stack overflow on ARM systems
2856
wdenk55618472003-10-28 09:14:21 +00002857* Patch by Stephan Linz, 28 Oct 2003:
2858 fix init sequence error for NIOS port
2859
2860* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
2861
2862* Add CONFIG_VERSION_VARIABLE to TRAB configuration
2863
wdenka983cc22003-10-26 22:52:58 +00002864* Patch by Xiao Xianghua, 23 Oct 2003:
2865 small patch for mpc85xx
2866
2867* Fix small problem in MPC5200 I2C driver
2868
2869* Fix FCC3 support on ATC board
2870
dzu6605c842003-10-24 13:14:45 +00002871* Correct header printing for multi-image files in do_bootm()
2872
2873* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
2874
wdenk6fcda222003-10-22 09:00:28 +00002875* Fix PCI problems on PPChameleon board
2876
wdenk3da587e2003-10-19 23:22:11 +00002877* Patch by Steven Scholz, 18 Oct 2003:
2878 Fix AT91RM9200 ethernet driver
2879
2880* Patch by Nye Liu, 17 Oct 2003:
2881 Fix typo in include/mpc8xx.h
2882
2883* Patch by Richard Woodruff, 16 Oct 03:
2884 Fixes for cpu/arm925/interrupt.c
2885 - Initialize timestamp & lastdec vars.
2886 - fix timestamp overflows.
2887 - fix lastdec overflow.
2888 - smarter normalization to allow udelay() below 1ms to work.
2889
2890* Patch by Scott McNutt, 16 Oct
2891 add networking support for the Altera Nios Development Kit,
2892 Cyclone Edition (DK-1C20)
2893
2894* Patch by Jon Diekema, 14 Oct 2003:
2895 add hint about doc/README.silent to README file
2896
dzub02ed682003-10-19 21:43:26 +00002897* Add CompactFlash support for NSCU
2898
wdenkad7541e2003-10-19 22:30:08 +00002899* Fix PCI problems on PPChameleonEVB
2900
wdenk17d1a1d2003-10-16 12:53:35 +00002901* TRAB auto-update: Base decision if we have to strip the image
2902 header on image type as encoded in the header
wdenkad7541e2003-10-19 22:30:08 +00002903 (include image type patch by Martin Krause, 17 Oct 2003)
wdenk17d1a1d2003-10-16 12:53:35 +00002904
wdenk9c53f402003-10-15 23:53:47 +00002905* Patches by Xianghua Xiao, 15 Oct 2003:
2906
2907 - Added Motorola CPU 8540/8560 support (cpu/85xx)
2908 - Added Motorola MPC8540ADS board support (board/mpc8540ads)
2909 - Added Motorola MPC8560ADS board support (board/mpc8560ads)
2910
2911* Fix flash timings on TRAB board
2912
wdenkbd1575f2003-10-14 19:43:55 +00002913* Make sure HUSH is initialized for running auto-update scripts
2914
2915* Make 5200 reset command _really_ reset the board, without running
2916 any other code after it
2917
2918* Fix errors with flash erase when range spans across banks
2919 that are mapped in reverse order
2920
2921* Fix flash mapping and display on P3G4 board
2922
2923* Patch by Kyle Harris, 15 Jul 2003:
2924 - add support for Intel IXP425 CPU
2925 - add support for IXDP425 eval board
2926
wdenk808532a2003-10-10 10:05:42 +00002927* Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
2928 for more information
2929
wdenk9b7f3842003-10-09 20:09:04 +00002930* Patch by Steven Scholz, 10 Oct 2003
2931 - Add support for Altera FPGA ACEX1K
2932
wdenk9f837932003-10-09 19:00:25 +00002933* Patches by Thomas Lange, 09 Oct 2003:
2934 - fix cmd_ide.c for non ppc boards (read/write functions did not
2935 add ATA base address)
2936 - fix for shannon board
2937 - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
wdenk9b7f3842003-10-09 20:09:04 +00002938 - Endian swap ATA identity for all big endian CPUs, not just PPC
2939 - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
2940 args to linux
2941 - add support for dbau1x00 board (MIPS32)
wdenk9f837932003-10-09 19:00:25 +00002942
2943* Patch by Sangmoon Kim, 07 Oct 2003:
2944 add support for debris board
2945
wdenk61970fd2003-10-09 13:16:55 +00002946* Patch by Martin Krause, 09 Oct 2003:
2947 Fixes for TRAB board
2948 - /board/trab/rs485.c: correct baudrate
wdenk9c53f402003-10-15 23:53:47 +00002949 - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
wdenk61970fd2003-10-09 13:16:55 +00002950 udelay(); fix some timing problems with adc controller
2951 - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
2952 modify commands: touch and buzzer
2953
2954* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
2955 (quick & dirty workaround for rogue pointer problem in get_vfatname());
2956 Use direct function calls for auto_update instead of hush commands
2957
wdenk60164a82003-10-08 23:26:14 +00002958* Patch by Scott McNutt, 04 Oct 2003:
2959 - add support for Altera Nios-32 CPU
2960 - add support for Nios Cyclone Development Kit (DK-1C20)
2961
2962* Patch by Steven Scholz, 29 Sep 2003:
2963 - A second parameter for bootm overwrites the load address for
2964 "Standalone Application" images.
2965 - bootm sets environment variable "filesize" to the resulting
2966 (uncompressed) data length for "Standalone Application" images
2967 when autostart is set to "no". Now you can do something like
2968 if bootm $fpgadata $some_free_ram ; then
2969 fpga load 0 $some_free_ram $filesize
2970 fi
2971
2972* Patch by Denis Peter, 25 Sept 2003:
2973 add support for the MIP405 Rev. C board
2974
wdenk2f0812d2003-10-08 22:45:44 +00002975* Patch by Yuli Barcohen, 25 Sep 2003:
2976 add support for Zephyr Engineering ZPC.1900 board
2977
2978* Patch by Anders Larsen, 23 Sep 2003:
2979 add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
2980 implemented for the x86 architecture)
2981
wdenk49c3f672003-10-08 22:33:00 +00002982* Patch by Sangmoon Kim, 23 Sep 2003:
2983 fix pll_pci_to_mem_multiplier table for MPC8245
2984
2985* Patch by Anders Larsen, 22 Sep 2003:
2986 enable timed autoboot on PXA
2987
2988* Patch by David Müller, 22 Sep 2003:
wdenk49c3f672003-10-08 22:33:00 +00002989 - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
2990 returns correct libgcc file path
2991 - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
2992 time on s3c24x0 systems
2993
2994* Patch by Jon Diekema, 19 Sep 2003:
2995 - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
2996 link state to the fault LED.
2997 - In NetLoop, make the Fault LED reflect the link status. The link
2998 status gets updated on entry, and on timeouts.
wdenk9c53f402003-10-15 23:53:47 +00002999
wdenk1ee550e2003-10-08 22:14:02 +00003000* Patch by Anders Larsen, 18 Sep 2003:
3001 allow mkimage to build and run on Cygwin-hosted systems
3002
3003* Patch by Frank Müller, 18 Sep 2003:
3004 use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
3005 cpu/mpc8xx/fec.c
3006
3007* Patch by Pantelis Antoniou, 16 Sep 2003:
3008 add tool to compute fileds in the PLPRCR register for MPC86x
3009
wdenkec207f92003-10-07 20:01:55 +00003010* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
3011
wdenke97dcd02003-10-07 10:33:38 +00003012* Fix build problems under FreeBSD
3013
wdenk6cd4a5e2003-10-06 22:00:45 +00003014* Add generic filesystem image type
3015
wdenk7182b0f2003-10-06 21:55:32 +00003016* Make fatload set filesize environment variable
3017
3018* enable basic / medium / high-end configurations for PPChameleonEVB
3019 board; fix NAND code
3020
3021* enable TFTP client code to specify to the server the desired
3022 timeout value (see RFC-2349)
3023
dzu15b57c72003-09-30 15:22:12 +00003024* Improve SDRAM setup for TRAB board
3025
dzud5e45d82003-09-30 15:11:43 +00003026* Suppress all output with splashscreen configured only if "splashimage"
3027 is set
3028
dzuc9b08252003-09-30 14:36:51 +00003029* Fix problems with I2C support for mpc5200
3030
dzu8d7e4d12003-09-29 21:55:54 +00003031* Adapt TRAB configuration and auto_update to new memory layout
3032
dzu69438f62003-09-25 22:32:40 +00003033* Add configuration for wtk board
3034
dzufae2d812003-09-25 22:30:12 +00003035* Add support for the Sharp LQ065T9DR51U LCD display
3036
wdenk8706ea82003-09-18 10:02:25 +00003037* Patch by Rune Torgersen, 17 Sep 2003:
3038 - Fixes for MPC8266 default config
wdenk5256def2003-09-18 10:45:21 +00003039 - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
wdenk8706ea82003-09-18 10:02:25 +00003040
3041* Patches by Jon Diekema, 17 Sep 2003:
3042 - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
3043 env_common.c)
3044 - sbc8260 tweaks
3045 - adjust "help" output
3046
wdenk5958f4a2003-09-18 09:21:33 +00003047* Patches by Anders Larsen, 17 Sep 2003:
3048 - fix spelling errors
3049 - set GD_FLG_DEVINIT flag only after device function pointers
3050 are valid
3051 - Allow CFG_ALT_MEMTEST on systems where address zero isn't
3052 writeable
3053 - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
3054 - trigger watchdog while waiting in serial driver
3055
wdenkb6b2f0e2003-09-17 22:48:07 +00003056* Add auto-update code for TRAB board using USB memory sticks,
3057 support new configuration with more memory
wdenkf6a6ac12003-09-17 15:10:32 +00003058
wdenk7f202b92003-09-16 17:35:37 +00003059* disable MPC5200 bus pipelining as workaround for bus contention
3060
wdenkf5547d32003-09-16 17:06:05 +00003061* Modify XLB arbiter priorities on MPC5200 so all devices use same
3062 priority; configure critical interrupts to be handled like external
3063 interrupts
3064
wdenk6e2bf7a2003-09-16 11:39:10 +00003065* Make IPB clock on MGT5100/MPC5200 configurable in board config file;
3066 go back to 66 MHz for stability
3067
wdenk1f197c62003-09-15 18:00:00 +00003068* Patches by Jon Diekema, 15 Sep 2003:
3069 - add description for missing CFG_CMD_* entries in the README file
3070 - sacsng tweaks
3071
wdenkfc314ce2003-09-14 19:08:39 +00003072* Patch by Gleb Natapov, 14 Sep 2003:
3073 enable watchdog support for all MPC824x boards that have a watchdog
3074
3075* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
3076 "Non-octet Aligned Frame" errors we see at 100 Mbps
3077
3078* Patch by Sharad Gupta, 14 Sep 2003:
3079 fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
3080
wdenkbd08bc42003-09-13 19:13:29 +00003081* Patch by llandre, 11 Sep 2003:
3082 update configuration for PPChameleonEVB board
3083
wdenk25521902003-09-13 19:01:12 +00003084* Patch by David Müller, 13 Sep 2003:
3085 various changes to VCMA9 board specific files
3086
3087* Add I2C support for MGT5100 / MPC5200
3088
wdenkf28560f2003-09-12 20:09:09 +00003089* Patch by Rune Torgersen, 11 Sep 2003:
3090 Changed default memory option on MPC8266ADS to NOT be Page Based
3091 Interleave, since this doesn't work very well with the standard
3092 16MB DIMM
3093
3094* Patch by George G. Davis, 12 Sep 2003:
3095 fix Makefile settings for sk98 driver
3096
stroese84da3532003-09-12 08:57:52 +00003097* Patch by Stefan Roese, 12 Sep 2003:
3098 - new boards added: DP405, HUB405, PLU405, VOH405
3099 - some esd boards updated
3100 - cpu/ppc4xx/sdram.c: disable memory controller before setting
3101 first values
3102 - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
3103
wdenk4cc02a82003-09-11 23:06:34 +00003104* Patch by Martin Krause, 11 Sep 2003:
3105 add burn-in tests for TRAB board
3106
3107* Enable instruction cache on MPC5200 board
3108
wdenk934c4f82003-09-11 19:48:06 +00003109* Patch by Denis Peter, 11 Sep 2003:
3110 - fix USB data pointer assignment for bulk only transfer.
3111 - prevent to display erased directories in FAT filesystem.
3112
3113* Change output format for NAND flash - make it look like for other
3114 memory, too
3115
3116======================================================================
wdenkde887eb2003-09-10 18:20:28 +00003117Changes for U-Boot 0.4.8:
wdenk2bb11052003-07-17 23:16:40 +00003118======================================================================
3119
dzufae2d812003-09-25 22:30:12 +00003120* Add I2C and RTC support for RMU board
3121
wdenk2c9b05d2003-09-10 22:30:53 +00003122* Patches by Denis Peter, 9 Sep 2003:
3123 add FAT support for IDE, SCSI and USB
3124
3125* Patches by Gleb Natapov, 2 Sep 2003:
3126 - cleanup of POST code for unsupported architectures
3127 - MPC824x locks way0 of data cache for use as initial RAM;
3128 this patch unlocks it after relocation to RAM and invalidates
3129 the locked entries.
3130
3131* Patch by Gleb Natapov, 30 Aug 2003:
3132 new I2C driver for mpc107 bridge. Now works from flash.
3133
3134* Patch by Dave Ellis, 11 Aug 2003:
3135 - JFFS2: fix typo in common/cmd_jffs2.c
3136 - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
3137 - JFFS2: remove node version 0 warning
3138 - JFFS2: accept JFFS2 PADDING nodes
3139 - SXNI855T: add AM29LV800 support
3140 - SXNI855T: move environment from EEPROM to flash
3141 - SXNI855T: boot from JFFS2 in NOR or NAND flash
3142
3143* Patch by Bill Hargen, 11 Aug 2003:
3144 fixes for I2C on MPC8240
3145 - fix i2c_write routine
3146 - fix iprobe command
3147 - eliminates use of global variables, plus dead code, cleanup.
3148
wdenkde887eb2003-09-10 18:20:28 +00003149* Add support for USB Mass Storage Devices (BBB)
3150 (tested with USB memory sticks only)
3151
3152* Avoid flicker on TRAB's VFD
3153
wdenkeb20ad32003-09-05 23:19:14 +00003154* Add support for SK98xx driver
3155
3156* Add PCI support for SL8245 board
3157
3158* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
3159 or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
3160 Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
3161
3162* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
3163 to allow for more accurate baudrate settings
3164 (error now 0.7% at 115 kbps, instead of 3.5% before)
3165
3166* Patch by Andreas Mohr, 4 Sep 2003:
3167 Fix a lot of spelling errors
3168
wdenk232fe0b2003-09-02 22:48:03 +00003169* Add support for PPChameleon Eval Board
3170
3171* Add support for P3G4 board
3172
3173* Fix problem with MGT5100 FEC driver: add "early" MAC address
3174 initialization
3175
wdenk9a8965d2003-08-31 18:37:54 +00003176* Patch by Yuli Barcohen, 7 Aug 2003:
3177 check BCSR to detect if the board is configured in PCI mode
3178
wdenkde887eb2003-09-10 18:20:28 +00003179======================================================================
3180Changes for U-Boot 0.4.7:
3181======================================================================
3182
wdenk84650f52003-08-30 00:05:50 +00003183* Patch by Raghu Krishnaprasad, 7 Aug 2003:
3184 add support for Adder II MPC852T module
3185
wdenk7eaacc52003-08-29 22:00:43 +00003186* Patch by George G. Davis, 19 Aug 2003:
3187 fix TI Innovator/OMAP1510 pin configs
3188
3189* Patches by Kshitij, 18 Aug 2003
3190 - add support for arm926ejs cpu core
3191 - add support for TI OMAP 1610 Innovator Board
3192
wdenk710e3502003-08-29 20:57:53 +00003193* Patch by Yuli Barcohen, 14 Aug 2003:
3194 add support for bzip2 uncompression
3195
3196* Add GCC library to examples/Makefile so GCC utility functions will
3197 be resolved, too
3198
wdenk2191f502003-08-29 10:05:53 +00003199* Add I2C and RTC support for RMU board using software I2C driver
3200 (because of better response to iprobe command); fix problem with
3201 "reset" command
3202
stroese20a26922003-08-28 14:24:37 +00003203* Patch by Matthias Fuchs, 28 Aug 2003:
3204 Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
3205 CONFIG_BOOTP_MAKS (see README).
3206
wdenkb10ba6b2003-08-28 09:41:22 +00003207* Fix ICU862 environment problem
3208
3209* Fix RAM size detection for RMU board
3210
3211* Implement "reset" for MGT5100/MPC5200 systems
3212
3213======================================================================
3214Changes for U-Boot 0.4.6:
3215======================================================================
3216
wdenk5d841732003-08-17 18:55:18 +00003217* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
3218 allow selection of clock frequency as "make" target
3219
3220* Implement memory autosizing code for IceCube boards
3221
3222* Configure network port on INCA-IP for autonegotiation
3223
3224* Fix overflow problem in network timeout code
3225
3226* Patch by Richard Woodruff, 8 Aug 2003:
3227 Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
3228
wdenkb10ba6b2003-08-28 09:41:22 +00003229======================================================================
3230Changes for U-Boot 0.4.5:
3231======================================================================
3232
wdenkfb229ae2003-08-07 22:18:11 +00003233* Update for TQM board defaults:
3234 disable clocks_in_mhz, enable boot count limit
3235
dzuf6565c62003-08-07 15:04:48 +00003236* Removed tools/gdb from "make all" target. Added make target "gdbtools"
3237 in toplevel directory instead. Removed astest.c from tools/gdb because
3238 it is no longer relevant.
3239
wdenk02379022003-08-05 18:22:44 +00003240* Fix PCI support for MPC5200 / IceCube Board
3241
wdenk0a658552003-08-05 17:43:17 +00003242* Map ISP1362 USB OTG controller for NSCU board
3243
3244* Patch by Brad Parker, 02 Aug 2003:
3245 fix sc520_cdp problems
3246
3247* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
3248
3249* Allow erase command to cross flash bank boundaries
3250
wdenke58b0dc2003-07-27 00:21:01 +00003251* Patch by Scott McNutt, 21 Jul 2003:
3252 Add support for LynuxWorks Kernel Downloadable Images (KDIs).
3253 Both LynxOS and BlueCat linux KDIs are supported.
3254
3255* Patch by Richard Woodruff, 25 Jul 2003:
3256 use more reliable reset for OMAP/925T
3257
3258* Patch by Nye Liu, 25 Jul 2003:
3259 fix typo in mpc8xx.h
3260
3261* Patch by Richard Woodruff, 24 Jul 2003:
3262 Fixes for cmd_nand.c:
3263 - Fixed null dereferece which could result in incorrect ECC values.
3264 - Added support for devices with no Ready/Busy signal hooked up.
3265 - Added OMAP1510 read/write protect handling.
3266 - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
3267 for non-JFFS2.
3268 - Switched default ECC to be JFFS2.
3269
wdenkb8463562003-07-26 08:08:08 +00003270* Allow crc32 to be used at address 0x000
3271
3272* Provide consistent interface to standalone applications to access
3273 the 'global_data' structure
3274 Provide a doc/README.standalone more useful to users/developers.
3275
3276* Make IceCube MGT5100 FEC driver work
3277
wdenk874ac262003-07-24 23:38:38 +00003278* Implement new mechanism to export U-Boot's functions to standalone
3279 applications: instead of using (PPC-specific) system calls we now
3280 use a jump table; please see doc/README.standalone for details
3281
3282* Patch by Dave Westwood, 24 Jul 2003:
3283 added support for Unity OS (a proprietary OS)
3284
3285* Patch by Detlev Zundel, 23 Jul 2003:
3286 add "imls" command to print flash table of contents
3287
3288* Fix cold boot detection for log buffer reset
3289
3290* Return error for invalid length specifiers with "cp.X" etc.
3291
3292* Fix startup problem on MIPS
3293
3294* Allow for CONFIG_SPLASH_SCREEN even when no explicit
3295 bitmap support is configured
3296
3297* Patch by Bill Hargen, 18 Jul 2003:
3298 - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
3299
3300* Patch by Denis Peter, 18 Jul 2003:
3301 - fix memory configuration for MIP405T
3302 - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
3303
3304* Cleanup of TQM82xx configurations; use "official" board types
3305 to make selection easier.
3306
wdenk2bb11052003-07-17 23:16:40 +00003307* Patch by Martin Krause, 17 Jul 2003:
3308 add delay to get I2C working with "imm" command and s3c24x0_i2c.c
3309
3310* Patch by Richard Woodruff, 17 July 03:
stroese20a26922003-08-28 14:24:37 +00003311 - Fixed bug in OMAP1510 baud rate divisor settings.
wdenk2bb11052003-07-17 23:16:40 +00003312
3313* Patch by Nye Liu, 16 July 2003:
3314 MPC860FADS fixes:
3315 - add MPC86xADS support (uses MPC86xADS.h)
3316 - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
3317 o PLPRCR changes
3318 o BRG changes (EXTAL/XTAL restricted to 10MHz)
3319 o don't trust gclk() software measurement by default, depend on
3320 CONFIG_8xx_GCLK_FREQ
3321 - add DRAM SIMM not installed detection
3322 - use more "correct" SDRAM initialization sequence
3323 - allow different SDRAM sizes (8xxADS has 8M)
3324 - default DER is 0
3325 - remove unused MAMR defines from FADS860T.h (all done in fads.c)
3326 - rename MAMR/MBMR defines to be more consistent. Should eventually
3327 be merged into MxMR to better reflect the PowerQUICC datasheet.
3328
3329* Patch by Yuli Barcohen, 16 Jul 2003:
3330 support new Motorola PQ2FADS-ZU evaluation board which replaced
3331 MPC8260ADS and MPC8266ADS
3332
3333======================================================================
wdenk21136db2003-07-16 21:53:01 +00003334Changes for U-Boot 0.4.4:
3335======================================================================
3336
3337* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
3338
3339* Add support for MGT5100 and MPC5200 processors
3340
3341* Patch by Lutz Dennig, 15 Jul 2003:
3342 update for R360MPI board
3343
3344======================================================================
wdenkdccbda02003-07-14 22:13:32 +00003345Changes for U-Boot 0.4.3:
wdenkb9bbd242003-06-30 16:24:52 +00003346======================================================================
3347
wdenkf6f96f72003-07-15 20:04:06 +00003348* Patches by Kshitij, 04 Jul 2003
wdenk21136db2003-07-16 21:53:01 +00003349 - added support for arm925t cpu core
wdenkf6f96f72003-07-15 20:04:06 +00003350 - added support for TI OMAP 1510 Innovator Board
3351
wdenkca9bc762003-07-15 07:45:49 +00003352* Patches by Martin Krause, 14 Jul 2003:
3353 - add I2C support for s3c2400 systems (trab board)
3354 - (re-) add "ping" to command table
3355
3356* Fix handling of "slow" POST routines
3357
wdenkdccbda02003-07-14 22:13:32 +00003358* Patches by Yuli Barcohen, 13 Jul 2003:
3359 - Correct flash and JFFS2 support for MPC8260ADS
3360 - fix PVR values and clock generation for PowerQUICC II family
3361 (8270/8275/8280)
3362
3363* Patch by Bernhard Kuhn, 08 Jul 2003:
3364 - add support for M68K targets
3365
3366* Patch by Ken Chou, 3 Jul:
3367 - Fix PCI config table for A3000
3368 - Fix iobase for natsemi.c
3369 (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
wdenk21136db2003-07-16 21:53:01 +00003370
wdenkdccbda02003-07-14 22:13:32 +00003371* Allow to enable "slow" POST routines by key press on power-on
3372* Fix temperature dependend switching of LCD backlight on LWMON
3373* Tweak output format for LWMON
3374
stroesebe848492003-07-11 08:23:12 +00003375* Patch by Stefan Roese, 11 Jul 2003:
3376 - Fix bug in CONFIG_VERSION_VARIABLE.
3377 - AR405 config updated.
3378 - OCRTC/ORSG: bsp command added.
3379 - ASH405 bsp update.
3380
wdenkdccbda02003-07-14 22:13:32 +00003381======================================================================
3382Changes for U-Boot 0.4.2:
3383======================================================================
3384
wdenk69141282003-07-07 20:07:54 +00003385* Add support for NSCU board
3386
3387* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
3388
3389* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
3390 mirror bit flash on TQM8xxM modules
3391
wdenkf287a242003-07-01 21:06:45 +00003392* Patch by Kenneth Johansson, 30 Jun 2003:
3393 get rid of MK_CMD_ENTRY macro; update doc/README.command
3394
wdenkb9bbd242003-06-30 16:24:52 +00003395* Patch by Seb James, 30 Jun 2003:
3396 Improve documentation of I2C configuration in README
3397
3398* Fix problems with previous log buffer "fixes"
3399
3400* Fix minor help text issues
3401
3402* "log append" did not append a newline
3403
3404======================================================================
wdenkf12e3962003-06-29 21:03:46 +00003405Changes for U-Boot 0.4.1:
wdenkc08f1582003-04-27 22:52:51 +00003406======================================================================
3407
wdenkf12e3962003-06-29 21:03:46 +00003408* Fix some missing commands, cleanup header files
3409 (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
3410
wdenk3086a972003-06-28 23:11:04 +00003411* Rewrite command lookup and help command (fix problems with bubble
3412 sort when sorting command name list). Minor cleanup here and there.
3413
wdenkd9fce812003-06-28 17:24:46 +00003414* Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
3415 - Allow to call sysmon function interactively
3416 - PIC on LWMON board needs delay after power-on
3417 - Add missing RSR definitions for MPC8xx
3418 - Improve log buffer handling: guarantee clean reset after power-on
wdenkde887eb2003-09-10 18:20:28 +00003419 - Add support for EXBITGEN board (aka "genie")
wdenkd9fce812003-06-28 17:24:46 +00003420 - Add support for SL8245 board
3421
wdenk57b2d802003-06-27 21:31:46 +00003422* Code cleanup:
3423 - remove trailing white space, trailing empty lines, C++ comments, etc.
3424 - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
3425
3426* Patches by Kenneth Johansson, 25 Jun 2003:
3427 - major rework of command structure
3428 (work done mostly by Michal Cendrowski and Joakim Kristiansen)
3429
3430======================================================================
3431Changes for U-Boot 0.4.0:
3432======================================================================
3433
wdenk70764a32003-06-26 22:04:09 +00003434* Patches by Robert Schwebel, 26 Jun 2003:
wdenk57b2d802003-06-27 21:31:46 +00003435 - csb226 configuration updated
3436 - credits for logodl port updated
3437 - innokom configuration updated
3438 - logodl tree update, still with coding style inconsistencies
3439 - added OCM for ppc405 warning to README
wdenk70764a32003-06-26 22:04:09 +00003440
3441* Patch by Pantelis Antoniou, 25 Jun 2003:
3442 update NetVia with V2 board support
3443
wdenkbb2d9272003-06-25 22:26:29 +00003444* Header file cleanup for ARM
3445
3446* Patch by Murray Jensen, 24 Jun 2003:
3447 - make sure to use only U-boot provided header files
3448 - fix problems with ".rodata.str1.4" section as used by GCC-3.x
3449
stroeseab2751b2003-06-24 14:32:24 +00003450* Patch by Stefan Roese, 24 Jun 2003:
3451 - Update esd ASH405 board files.
3452 - Update esd DASA_SIM config file.
3453 - Add ping command to some esd boards.
3454
wdenk88d2ba92003-06-23 18:12:28 +00003455* Patch by Yuli Barcohen, 23 Jun 2003:
3456 Update for MPC8260ADS board
3457
3458* Patch by Murray Jensen, 23 Jun 2003:
3459 - cleanup of GCC 3.x compiler warnings
3460
wdenk56958612003-06-22 17:18:28 +00003461* Patch by Rune Torgersen, 4 Jun 2003:
3462 add large memory support for MPC8266ADS board
stroeseab2751b2003-06-24 14:32:24 +00003463
wdenk56958612003-06-22 17:18:28 +00003464* Patch by Richard Woodruff, 19 June 03:
3465 - Enabled standard u-boot device abstraction for ARM
3466 - Enabled console device for ARM
3467 - Initilized bi_baudrate for ARM
3468
3469* Patch by Bill Hargen, 23 Apr 2003:
3470 fix byte order for 824x I2C addresses (write op)
3471
wdenkdbae5042003-06-21 00:17:24 +00003472* Patch by Murray Jensen, 20 Jun 2003:
3473 - hymod update
3474 - cleanup (especially for gcc-3.x compilers)
3475
wdenkaaf48a92003-06-20 23:10:58 +00003476* Patch by Tom Guilliams, 20 Jun 2003:
3477 added CONFIG_750FX support for IBM 750FX processors
3478
wdenk8aeb24e2003-06-20 22:36:30 +00003479* Patch by Devin Crumb, 02 Apr 2003:
3480 Fix clock divider rounding problem in drivers/serial.c
3481
3482* Patch by Richard Woodruff, 19 June 03:
3483 - Fixed smc91c111 driver to sync with the u-boot environment
3484 (driver/smc91c111.c).
wdenk3e8b7dc2003-06-19 23:58:30 +00003485 - Added eth_init error return check in NetLoop (net/net.c).
3486
wdenk8aeb24e2003-06-20 22:36:30 +00003487* Patch by Ken Chou, 19 June 2003:
wdenk3e8b7dc2003-06-19 23:58:30 +00003488 Added support for A3000 SBC board (Artis Microsystems Inc.)
3489
wdenkb00ec162003-06-19 23:40:20 +00003490* Patches by Murray Jensen, 17 Jun 2003:
3491 - Hymod board database mods: add "who" field and new xilinx chip types
3492 - provide new "init_cmd_timeout()" function so code external to
3493 "common/main.c" can use the "reset_cmd_timeout()" function before
3494 entering the main loop
3495 - add DTT support for adm1021 (new file dtt/adm1021.c; config
3496 slightly different. see include/configs/hymod.h for an example
3497 (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
3498 CFG_DTT_ADM1021 defined)
3499 - add new "eeprom_probe()" function which has similar args and
3500 behaves in a similar way to "eeprom_read()" etc.
3501 - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
3502 function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
3503 - gdbtools copyright update
3504 - ensure that set_msr() executes the "sync" and "isync" instructions
3505 after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
3506 - 8260 I/O ports fix: Open Drain should be set last when configuring
3507 - add SIU IRQ defines for 8260
3508 - allow LDSCRIPT override and OBJCFLAGS initialization: change to
3509 config.mk to allow board configurations to override the GNU
3510 linker script, selected via the LDSCRIPT, make variable, and to
3511 give an initial value to the OBJCFLAGS make variable
3512 - 8260 i2c enhancement:
3513 o correctly extends the timeout depending on the size of all
3514 queued messages for both transmit and receive
3515 o will not continue with receive if transmit times out
3516 o ensures that the error callback is done for all queued tx
3517 and rx messages
3518 o correctly detects both tx and rx timeouts, only delivers one to
3519 the callback, and does not overwrite an earlier error
3520 o logic in i2c_probe now correct
3521 - add "vprintf()" function so that "panic()" function can be
3522 technically correct
3523 - many Hymod board changes
3524
wdenk88e72a32003-06-19 23:04:19 +00003525* Patches by Robert Schwebel, 14 Jun 2003:
3526 - add support for Logotronic DL datalogger board
3527 - cleanup serial line after kermit binary download
3528 - add debugX macro (debug level support)
3529 - update mach-types.h to latest arm.linux.org.uk master list.
3530
wdenk7539dea2003-06-19 23:01:32 +00003531* Patches by David Müller, 12 Jun 2003:
3532 - rewrite of the S3C24X0 register definitions stuff
3533 - "driver" for the built-in S3C24X0 RTC
3534
3535* Patches by Yuli Barcohen, 12 Jun 2003:
3536 - Add MII support and Ethernet PHY initialization for MPC8260ADS board
3537 - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
3538 configuration word supplied by FPGA on some MPC8260ADS boards
3539
3540* Patch by Pantelis Antoniou, 10 Jun 2003:
3541 Unify status LED interface
3542
wdenkd155afb2003-06-18 20:22:24 +00003543* Add support for DS12887 RTC; add RTC support for ATC board
3544
wdenk381669a2003-06-16 23:50:08 +00003545* Patch by Nicolas Lacressonniere, 11 Jun 2003:
3546 Modifications for Atmel AT91RM9200DK ARM920T based development kit
3547 - Add Atmel DataFlash support for reading and writing.
stroeseab2751b2003-06-24 14:32:24 +00003548 - Add possibility to boot a Linux from DataFlash with BOOTM command.
wdenk381669a2003-06-16 23:50:08 +00003549 - Add Flash detection on Atmel AT91RM9200DK
3550 (between Atmel AT49BV1614 and AT49BV1614A flashes)
3551 - Replace old Ethernet PHY layer functions
3552 - Change link address
3553
3554* Patch by Frank Smith, 9 Jun 2003:
3555 use CRIT_EXCEPTION for machine check on 4xx
3556
3557* Patch by Detlev Zundel, 13 Jun 2003:
3558 added implementation of the "carinfo" command in cmd_immap.c
3559
wdenk7a428cc2003-06-15 22:40:42 +00003560* Fix CONFIG_NET_MULTI support in include/net.h
3561
3562* Patches by Kyle Harris, 13 Mar 2003:
3563 - Add FAT partition support
3564 - Add command support for FAT
3565 - Add command support for MMC
3566 ----
3567 - Add Intel PXA support for video
3568 - Add Intel PXA support for MMC
3569 ----
3570 - Enable MMC and FAT for lubbock board
3571 - Other misc changes for lubbock board
3572
wdenkb2abefb2003-06-06 11:20:01 +00003573* Patch by Robert Schwebel, April 02, 2003:
3574 fix for SMSC91111 driver
3575
wdenk77934442003-06-05 19:37:36 +00003576* Patch by Vladimir Gurevich, 04 Jun 2003:
3577 make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
3578
stroese98636162003-06-05 15:44:37 +00003579* Patch by Stefan Roese, 05 Jun 2003:
3580 - PPC4xx: Fix bug for initial stack in data cache as pointed out by
3581 Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
3582 data cache can be used even if the chip select is in use.
3583 - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
3584 (see README for further description).
3585 - Changed config files of CONFIG_EEPRO100 boards to use the
3586 CFG_RX_ETH_BUFFER define.
3587
wdenke6466f62003-06-05 19:27:42 +00003588* Add support for RMU board
3589
3590* Add support for TQM862L at 100/50 MHz
3591
3592* Patch by Pantelis Antoniou, 02 Jun 2003:
3593 major reconstruction of networking code;
3594 add "ping" support (outgoing only!)
3595
wdenke39c2842003-06-04 15:05:30 +00003596* Patch by Denis Peter, 04 June 2003:
3597 add support for the MIP405T board
3598
wdenk4e112c12003-06-03 23:54:09 +00003599* Patches by Udi Finkelstein, 2 June 2003:
3600 - Added support for custom keyboards, initialized by defining a
3601 board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
3602 - Added support for the RBC823 board.
3603 - cpu/mpc8xx/lcd.c now automatically calculates the
3604 Horizontal Pixel Count field.
3605
3606* Fix alignment problem in BOOTP (dhcp_leasetime option)
3607 [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
3608
3609* Patch by Mark Rakes, 14 May 2003:
3610 add support for Intel e1000 gig cards.
3611
3612* Patch by Nye Liu, 3 Jun 2003:
3613 fix critical typo in MAMR definition (include/mpc8xx.h)
3614
3615* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
3616
3617* Patch by Klaus Heydeck, 2 Jun 2003
3618 Minor changes for KUP4K configuration
3619
wdenkabda5ca2003-05-31 18:35:21 +00003620* Patch by Marc Singer, 29 May 2003:
3621 Fixed rarp boot method for IA32 and other little-endian CPUs.
3622
3623* Patch by Marc Singer, 28 May 2003:
3624 Added port I/O commands.
3625
3626* Patch by Matthew McClintock, 28 May 2003
3627 - cpu/mpc824x/start.S: fix relocation code when booting from RAM
3628 - minor patches for utx8245
3629
3630* Patch by Daniel Engström, 28 May 2003:
3631 x86 update
3632
3633* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
3634 add nand flash support to SXNI855T configuration
3635 fix/extend nand flash support:
3636 - fix 'nand erase' command so does not erase bad blocks
3637 - fix 'nand write' command so does not write to bad blocks
3638 - fix nand_probe() so handles no flash detected properly
3639 - add doc/README.nand
3640 - add .jffs2 and .oob options to nand read/write
3641 - add 'nand bad' command to list bad blocks
3642 - add 'clean' option to 'nand erase' to write JFFS2 clean markers
3643 - make NAND read/write faster
3644
3645* Patch by Rune Torgersen, 23 May 2003:
3646 Update for MPC8266ADS board
3647
wdenkb9a83a92003-05-30 12:48:29 +00003648* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
3649 instead CFG_MONITOR_LEN is now only used to determine _at_compile_
3650 _time_ (!) if the environment is embedded within the U-Boot image,
3651 or in a separate flash sector.
3652
3653* Cleanup CFG_DER #defines in config files (wd maintained only)
3654
wdenkf4688a22003-05-28 08:06:31 +00003655* Fix data abort exception handling for arm920t CPU
3656
3657* Fix alignment problems with flash driver for TRAB board
3658
3659* Patch by Donald White, 21 May 2003:
3660 fix calculation of base address in pci_hose_config_device()
3661
3662* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
3663 execute "cmd2", even if "cmd1" fails. Note that this is different
3664 to "run var1 var2" where the contents of "var2" will NOT be
3665 executed when a command in "var1" fails.
3666
wdenk6f770ed2003-05-23 23:18:21 +00003667* Add zero-copy ramdisk support (requires corresponding kernel support!)
3668
wdenk0463e042003-05-23 12:36:20 +00003669* Patch by Kyle Harris, 20 May 2003:
3670 In preparation for an ixp port, rename cpu/xscale and arch-xscale
3671 into cpu/pxa and arch-pxa.
3672
stroeseab38cf32003-05-23 11:49:24 +00003673* Patch by Stefan Roese, 23 May 2003:
3674 - IBM PPC405EP port added.
3675 - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
3676 UART0) is used as default U-Boot console. PPC4xx only!
3677 - esd ASH405 board added (PPC405EP based).
3678 - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
3679 - esd CPCI405AB board added.
3680 - esd PMC405 board added.
3681 - Update of some esd boards.
3682
wdenk7d076412003-05-23 11:38:58 +00003683* Patch by Denis Peter, 19 Mai 2003:
3684 add support for the MIP405-3 board
3685
wdenkbf2f8c92003-05-22 22:52:13 +00003686* Patch by Dave Ellis, 22 May 2003:
3687 Fix problem with only partially cleared .bss segment
3688
3689* Patch by Rune Torgersen, 12 May 2003:
3690 get PCI to work on a MPC8266ADS board; incorporate change to
3691 cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
3692
3693* Patch by Nye Liu, 1 May 2003:
3694 minor patches for the FADS8xx
3695
3696* Patch by Thomas Schäfer, 28 Apr 2003:
3697 Fix SPD handling for 256 ECC DIMM on Walnut
3698
wdenk6bd7b5d2003-05-21 20:26:20 +00003699* Add support for arbitrary bitmaps for TRAB's VFD command;
3700 allow to pass boot bitmap addresses in environment variables;
3701 allow for zero boot delay
wdenk26991552003-05-20 20:49:01 +00003702
3703* Patch by Christian Geißinger, 19 May 2002:
3704 On TRAB: wait until the dummy byte has been completely sent
3705
wdenk0893c472003-05-20 14:25:27 +00003706* Patch by David Updegraff, 22 Apr 2003:
3707 update for CrayL1 board
3708
3709* Patch by Pantelis Antoniou, 21 Apr 2003:
3710 add boot support for ARTOS (a proprietary OS)
3711
3712* Patch by Steven Scholz, 11 Apr 2003:
3713 Add support for RTC DS1338
3714
3715* Patch by Rod Boyce, 24 Jan 2003:
3716 Fix counting of extended partitions in diskboot command
3717
wdenkc394e392003-05-20 10:58:04 +00003718* Patch by Christophe Lindheimer, 20 May 2003:
3719 allow the use of CFG_LOADS when CFG_NO_FLASH is set
3720
wdenk6099e872003-05-20 10:39:44 +00003721* Fix SDRAM timing on Purple board
3722
wdenke5d61c72003-05-18 11:30:09 +00003723* Add support for CompactFlash on ATC board
3724 (includes support for Intel 82365 and compatible PC Card controllers,
3725 and Yenta-compatible PCI-to-CardBus controllers)
3726
wdenkaa603362003-05-12 21:50:16 +00003727* Patch by Mathijs Haarman, 08 May 2003:
3728 Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
3729
wdenke2e3f632003-05-03 23:33:47 +00003730* Fix problem with usage of "true" (undefined in current versions of bfd.h)
3731
wdenk541a76d2003-05-03 15:50:43 +00003732* Add support for Promess ATC board
3733
3734* Patch by Keith Outwater, 28 Apr 2003:
3735 - Miscellaneous corrections and additions to GEN860T board specific code.
3736 - Added GEN860_SC variant to GEN860T.
3737 - Miscellaneous corrections to GEN860T documentation.
3738 - Correct duplicate entry in U-Boot CREDITS file.
3739 - Add GEN860T_SC entry in MAINTAINERS file.
3740 - Update CREDITS file with GEN860T_SC info.
3741
3742* Update Smiths Aerospace addresses in MAINTAINERS file
3743
3744* Fix error handling in hush's version of "run" command
3745
wdenkc08f1582003-04-27 22:52:51 +00003746* LWMON extensions:
3747 - Splashscreen support
3748 - modem support
3749 - sysmon support
3750 - temperature dependend enabling of LCD
3751
3752* Allow booting from old "PPCBoot" disk partitions
3753
3754* Add support for TQM8255 Board / MPC8255 CPU
3755
3756======================================================================
wdenkedaa4892003-04-20 17:41:25 +00003757Changes for U-Boot 0.3.1:
wdenk6bd14892003-04-10 11:18:18 +00003758======================================================================
3759
wdenk92bbe3f2003-04-20 14:04:18 +00003760* Make sure Block Lock Bits get cleared in R360MPI flash driver
3761
3762* MPC823 LCD driver: Fill color map backwards, to allow for steady
3763 display when Linux takes over
3764
3765* Patch by Erwin Rol, 27 Feb 2003:
3766 Add support for RTEMS (this time for real).
3767
3768* Add support for "bmp info" and "bmp display" commands to load
3769 bitmap images; this can be used (for example in a "preboot"
3770 command) to display a splash screen very quickly after poweron.
3771
3772* Add support for 133 MHz clock on INCA-IP board
3773
wdenk3f9ab982003-04-12 23:38:12 +00003774* Patch by Lutz Dennig, 10 Apr 2003:
3775 Update for R360MPI board
3776
3777* Add new meaning to "autostart" environment variable:
3778 If set to "no", a standalone image passed to the
3779 "bootm" command will be copied to the load address
3780 (and eventually uncompressed), but NOT be started.
3781 This can be used to load and uncompress arbitrary
3782 data.
3783
stroeseee14b832003-04-10 13:30:28 +00003784* Patch by Stefan Roese, 10 Apr 2003:
wdenk3f9ab982003-04-12 23:38:12 +00003785 Changed DHCP client to use IP address from server option field #54
3786 from the OFFER packet in the server option field #54 in the REQUEST
3787 packet. This fixes a problem using a Windows 2000 DHCP server,
3788 where the DHCP-server is not the TFTP-server.
3789
3790* Set max brightness for MN11236 displays on TRAB board
stroeseee14b832003-04-10 13:30:28 +00003791
wdenk6bd14892003-04-10 11:18:18 +00003792* Add support for TQM862L modules
3793
3794======================================================================
wdenka6db71d2003-04-08 23:25:21 +00003795Changes for U-Boot 0.3.0:
wdenkeda42082003-01-17 16:27:01 +00003796======================================================================
3797
wdenkb02744a2003-04-05 00:53:31 +00003798* Patch by Arun Dharankar, 4 Apr 2003:
3799 Add IDMA example code (tested on 8260 only)
3800
3801* Add support for Purple Board (MIPS64 5Kc)
3802
3803* Add support for MIPS64 5Kc CPUs
3804
3805* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
3806
3807* Patch by Denis Peter, 04 Apr 2003:
3808 - update MIP405-4 board
3809
stroese2606cf12003-04-04 16:55:30 +00003810* Patch by Stefan Roese, 4 Apr 2003:
3811 - U-Boot version environment variable "ver" added
3812 (CONFIG_VERSION_VARIABLE).
3813 - Changed PPC405GPr version from A to B.
3814 - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
3815
wdenkb02744a2003-04-05 00:53:31 +00003816* Patches by Denis Peter, 03 April 2003:
3817 - fix PCI IRQs on MPL boards
3818 - fix two more un-relocated pointer problems
3819
3820* Fix behaviour of "run" command:
3821 - print error message iv variable does not exist
3822 - terminate processing of arguments in case of error
3823
3824* Patches by Peter Figuli, 10 Mar 2003
3825 - Add support for BTUART on PXA platform
3826 - Add support for WEP EP250 (PXA) board
3827
3828* Fix flash problems on INCA-IP; add tool to allow bruning images to
3829 flash using a BDI2000
3830
3831* Implement fix for I2C Edge Conditions problem for all boards that
3832 use the bit-banging driver (common/soft_i2c.c)
3833
wdenk359733b2003-03-31 17:27:09 +00003834* Patch by Martin Winistoerfer, 23 Mar 2003
3835 - Add port to MPC555/556 microcontrollers
3836 - Add support for cmi customer board with
3837 Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
3838
3839* Patch by Rick Bronson, 28 Mar 2003:
3840 - fix common/cmd_nand.c
3841
wdenk8dba0502003-03-31 16:34:49 +00003842* Patch by Arun Dharankar, 24 Mar 2003:
3843 - add threads / scheduler example code
3844
3845* Add patches by Robert Schwebel, 31 Mar 2003:
3846 - add ctrl-c support for kermit download
3847 - align bdinfo output on ARM
wdenkb02744a2003-04-05 00:53:31 +00003848 - csb226 board: bring in sync with innokom/memsetup.S
3849 - csb226 board: fix MDREFR handling
3850 - misc doc fixes / extensions
3851 - innokom board: cleanup, MDREFR fix in memsetup.S, config update
3852 - add BOOT_PROGRESS to armlinux.c
wdenk8dba0502003-03-31 16:34:49 +00003853
stroese2606cf12003-04-04 16:55:30 +00003854* Add CPU ID, version, and clock speed for INCA-IP
wdenk8dba0502003-03-31 16:34:49 +00003855
wdenk5840af22003-03-28 14:40:36 +00003856* Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
3857 - fix SRAM and SDRAM memory sizing
3858 - add status LED support
3859 - add MAC address for second (SCC1) ethernet port
3860
3861* Update default environment for TQM8260 board
3862
wdenkc8434db2003-03-26 06:55:25 +00003863* Patch by Rick Bronson, 16 Mar 2003:
wdenkbb1b8262003-03-27 12:09:35 +00003864 - Add NAND flash support for reading, writing, and erasing NAND
3865 flash (certain forms of which are called SmartMedia).
3866 - Add support for Atmel AT91RM9200DK ARM920T based development kit.
wdenkc8434db2003-03-26 06:55:25 +00003867
3868* Patches by Robert Schwebel, 19 Mar 2003:
3869 - use arm-linux-gcc as default compiler for ARM
3870 - fix i2c fixup code
3871 - fix missing baudrate setting
3872 - added $loadaddr / CFG_LOAD_ADDR support to loadb
3873 - moved "ignoring trailing characters" _before_ u-boot wants to
3874 print out diagnostics messages; removes bogus characters at the
3875 end of transmission
3876
3877* Patch by John Zhan, 18 Mar 2003:
3878 Add support for SinoVee Microsystems SC8xx boards
3879
3880* Patch by Rolf Offermanns, 21 Mar 2003:
3881 ported the dnp1110 related changes from the current armboot cvs to
3882 current u-boot cvs. smc91111 does not work. problem marked in
3883 smc91111.c, grep for "FIXME".
3884
3885* Patch by Brian Auld, 25 Mar 2003:
3886 Add support for STM flash chips on ebony board
3887
wdenk28536032003-03-25 16:50:56 +00003888* Add PCI support for MPC8250 Boards (PM825 module)
3889
stroesea95be4d2003-03-25 14:44:48 +00003890* Patch by Stefan Roese, 25 Mar 2003:
3891 - PCI405 update.
3892
stroesef2afa912003-03-20 15:32:59 +00003893* Patch by Stefan Roese, 20 Mar 2003:
3894 - CPCI4052 update (support for revision 3).
3895 - Set edge conditioning circuitry on PPC405GPr for compatibility
3896 to existing PPC405GP designs.
3897 - Clip udiv to 5 bits on PPC405 (serial.c).
3898
wdenkbb1b8262003-03-27 12:09:35 +00003899* Extend INCAIP board support:
3900 - add automatic RAM size detection
3901 - add "bdinfo" command
3902 - pass flash address and size to Linux kernel
3903 - switch to 150 MHz clock
3904
wdenk6b58f332003-03-14 20:47:52 +00003905* Avoid flicker on the TRAB's VFD by synchronizing the enable with
3906 the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
3907 boards, version 153 for Rev. 200 boards).
3908
3909* Patch by Vladimir Gurevich, 12 Mar 2003:
3910 Fix relocation problem of statically initialized string pointers
3911 in common/cmd_pci.c
3912
3913* Patch by Kai-Uwe Blöm, 12 Mar 2003:
3914 Cleanup & bug fixes for JFFS2 code:
3915 - the memory mangement was broken. It caused havoc on malloc by
3916 writing beyond the block boundaries.
3917 - the length calculation for files was wrong, sometimes resulting
3918 in short file reads.
3919 - data copying now optionally takes fragment version numbers into
3920 account, to avoid copying from older data.
3921 See doc/README.JFFS2 for details.
3922
wdenkef5fe752003-03-12 10:41:04 +00003923* Patch by Josef Wagner, 12 Mar 2003:
3924 - 16/32 MB and 50/80 MHz support with auto-detection for IP860
3925 - ETH05 and BEDBUG support for CU824
3926 - added support for MicroSys CPC45
3927 - new BOOTROM/FLASH0 and DOC base for PM826
3928
3929* Patch by Robert Schwebel, 12 Mar 2003:
3930 Fix the chpart command on innokom board
3931
3932* Name cleanup:
3933 mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
3934 s/PPCBoot/U-Boot/ in some files
3935 s/pImage/uImage/ in some files
3936
3937* Patch by Detlev Zundel, 15 Jan 2003:
3938 Fix '' command line quoting
3939
3940* Patch by The LEOX team, 19 Jan 2003:
3941 - add support for the ELPT860 board
3942 - add support for Dallas ds164x RTC
3943
wdenk1fe2c702003-03-06 21:55:29 +00003944* Patches by David Müller, 31 Jan 2003:
3945 - minimal setup for CardBus bridges
3946 - add EEPROM read/write support in the CS8900 driver
3947 - add support for the builtin I2C controller in the Samsung s3c24x0 chips
wdenkef5fe752003-03-12 10:41:04 +00003948 - add support for MPL's VCMA9 (Samsung s3c2410 based) board
wdenk1fe2c702003-03-06 21:55:29 +00003949
3950* Patch by Steven Scholz, 04 Feb 2003:
3951 add support for RTC DS1307
3952
3953* Patch by Reinhard Meyer, 5 Feb 2003:
3954 fix PLPRCR/SCCR init sequence on 8xx to allow for
3955 changes of EBDF by software
3956
3957* Patch by Vladimir Gurevich, 07 Feb 2003:
3958 "API-compatibility patch" for 4xx I2C driver
3959
3960* TRAB fixes / extensions:
3961 - Restore VFD brightness as saved in environment
wdenkd155afb2003-06-18 20:22:24 +00003962 - add support for Fujitsu flashes
wdenk1fe2c702003-03-06 21:55:29 +00003963 - make sure both buzzers are turned off (drive low level)
3964
wdenkcc1e2562003-03-06 13:39:27 +00003965* Patches by Robert Schwebel, 06 Mar 2003:
3966 - fix bug in BOOTP code (must use NetCopyIP)
3967 - update of CSB226 port
3968 - clear BSS segment on XScale
3969 - added support for i2c_init_board() function
3970 - update to the Innokom plattform
3971
3972* Extend support for redundand environments for configurations where
3973 environment size < sector size
3974
wdenkb666c8f2003-03-06 00:58:30 +00003975* Patch by Rune Torgersen, 13 Feb 2003:
3976 Add support for Motorola MPC8266ADS board
3977
3978* Patch by Kyle Harris, 19 Feb 2003:
3979 patches for the Intel lubbock board:
3980 memsetup.S - general cleanup (based on Robert's csb226 code)
3981 flash.c - overhaul, actually works now
3982 lubbock.c - fix init funcs to return proper value
3983
3984* Patch by Kenneth Johansson, 26 Feb 2003:
stroesef2afa912003-03-20 15:32:59 +00003985 - Fixed off by one in RFTA calculation.
wdenkb666c8f2003-03-06 00:58:30 +00003986 - No need to abort when LDF is lower than we can program it's only
stroesef2afa912003-03-20 15:32:59 +00003987 minimum timing so clamp it to what we can do.
wdenkb666c8f2003-03-06 00:58:30 +00003988 - Takes function pointer to function for reading the spd_nvram. Usefull
3989 for faking data or hardcode a module without the nvram.
3990 - fix other user for above change
3991 - fix some comments.
3992
3993* Patches by Brian Waite, 26 Feb 2003:
3994 - fix port for evb64260 board
3995 - fix PCI for evb64260 board
3996 - fix PCI scan
3997
3998* Patch by Reinhard Meyer, 1 Mar 2003:
3999 Add support for EMK TOP860 Module
4000
4001* Patch by Yuli Barcohen, 02 Mar 2003:
4002 Add SPD EEPROM support for MPC8260ADS board
4003
wdenk4a5c8a72003-03-06 00:02:04 +00004004* Patch by Robert Schwebel, 21 Jan 2003:
4005 - Add support for Innokom board
4006 - Don't complain if "install" fails
4007 - README cleanup (remove duplicated lines)
4008 - Update PXA header files
4009
4010* Add documentation for existing POST code (doc/README.POST)
4011
4012* Patch by Laudney Ren, 15 Jan 2003:
4013 Fix handling of redundand environment in "tools/envcrc.c"
4014
4015* Patch by Detlev Zundel, 28 Feb 2003:
4016 Add bedbug support for 824x systems
4017
4018* Add support for 16 MB flash configuration of TRAB board
4019
4020* Patch by Erwin Rol, 27 Feb 2003:
4021 Add support for RTEMS
4022
4023* Add image information to README
4024
stroesefd4b5a72003-02-18 11:30:24 +00004025* Patch by Stefan Roese, 18 Feb 2003:
4026 CPCIISER4 configuration updated.
4027
stroese85d0fec2003-02-17 16:06:06 +00004028* Patch by Stefan Roese, 17 Feb 2003:
4029 Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
4030
stroesef5dd4102003-02-14 11:21:23 +00004031* Patch by Stefan Roese, 13 Feb 2003:
4032 Add "pcidelay" environment variable (in ms, enabled via
4033 CONFIG_PCI_BOOTDELAY).
4034 PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
4035 RST# to respond to configuration cycles (33MHz -> 1s).
4036
wdenk4a5c8a72003-03-06 00:02:04 +00004037* Fix dual PCMCIA slot support (when running with just one
4038 slot populated)
4039
4040* Add VFD type detection to trab board
4041
4042* extend drivers/cs8900.c driver to synchronize ethaddr environment
4043 variable with value in the EEPROM
4044
stroese91ee5282003-02-10 16:39:00 +00004045* Patch by Stefan Roese, 10 Feb 2003:
4046 Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
4047
wdenkbb1b8262003-03-27 12:09:35 +00004048* Add support for MIPS32 4Kc CPUs
4049
4050* Add support for INCA-IP Board
4051
wdenk4a5c8a72003-03-06 00:02:04 +00004052======================================================================
4053Changes for U-Boot 0.2.2:
4054======================================================================
4055
wdenkeda42082003-01-17 16:27:01 +00004056* Add dual ethernet support on PM826
4057
4058* Add support for LXT971 PHY on PM826
4059
4060* Patch by Tord Andersson, 16 Jan 2003:
4061 Fix flash sector count for TQM8xxL
4062
4063* Fix I2C EEPROM problem on ICU862 board (would only write the first
4064 16 bytes out of each 32 byte block)
4065
4066======================================================================
4067Changes for U-Boot 0.2.1:
wdenk2f87a3f2002-12-20 23:42:25 +00004068======================================================================
4069
wdenk2dad91b2003-01-13 23:54:46 +00004070* Add support for V37 board
4071 (patch by Jón Benediktsson, 11 Dec 2002)
4072
wdenke7f34c62003-01-11 09:48:40 +00004073* Update baudrate in bd_info when it gets changed
4074
4075* Add watchdog trigger points while waiting for serial port
4076 (so far only 8xx -- needed on LWMON with 100ms watchdog)
4077
4078* Improve command line tool to access the U-Boot's environment
4079 (figuration of the utility, using a config file)
4080
wdenk654868c2003-01-02 23:57:29 +00004081* Add single quote support for (old) command line parser
4082
wdenk2f87a3f2002-12-20 23:42:25 +00004083* Switch LWMON board default config from FRAM to EEPROM;
4084 in POST, EEPROM shows up on 8 addresses
4085
4086======================================================================
wdenka08708c2002-12-17 18:07:30 +00004087Changes for U-Boot 0.2.0:
wdenk24ee89b2002-11-03 17:56:27 +00004088======================================================================
4089
wdenk34b613e2002-12-17 01:51:00 +00004090* Use 1-byte-read instead of -write for iprobe() function
4091 Add i2c commands to PM826 config
4092
4093* extend I2C POST code: check for list on known addresses
4094
wdenk9dfa8d12002-12-08 09:53:23 +00004095* Improve log buffer code; use "loglevel" to decide which messages
4096 to log on the console, too (like in Linux); get rid of "logstart"
4097
4098* Add command line tool to access the U-Boot's environment
4099 (board-specific for TRAB now, to be fixed later)
4100
wdenkbb444c92002-12-07 00:20:59 +00004101* Patch by Hans-Joerg Frieden, 06 Dec 2002
4102 Fix misc problems with AmigaOne support
4103
4104* Patch by Chris Hallinan, 3 Dec 2002:
4105 minor cleanup to the MPC8245 EPIC driver
4106
4107* Patch by Pierre Aubert , 28 Nov 2002
4108 Add support for external (SIU) interrupts on MPC8xx
4109
4110* Patch by Pierre Aubert , 28 Nov 2002
4111 Fix nested syscalls bug in standalone applications
4112
4113* Patch by David Müller, 27 Nov 2002:
4114 fix output of "pciinfo" command for CardBus bridge devices.
4115
4116* Fix bug in TQM8260 board detection - boards got stuck when board ID
4117 was not readable
4118
wdenk90e7e422002-12-04 23:39:58 +00004119* Add LED indication for IDE activity on KUP4K board
4120
wdenk9dd2b882002-12-03 21:28:10 +00004121* Fix startup problems with VFD display on TRAB
4122
4123* Patch by Pierre Aubert, 20 Nov 2002
4124 Add driver for Epson SED13806 graphic controller.
4125 Add support for BMP logos in cfb_console driver.
4126
wdenk2029f4d2002-11-21 23:11:29 +00004127* Added support for both PCMCIA slots (at the same time!) on MPC8xx
4128
4129* Patch by Rod Boyce, 21 Nov 2002:
4130 fix PCMCIA on MBX8xx board
4131
4132* Patch by Pierre Aubert , 21 Nov 2002
4133 Add CFG_CPM_POST_WORD_ADDR to make the offset of the
4134 bootmode word in DPRAM configurable
4135
wdenk67ff36c2002-11-19 23:01:07 +00004136* Patch by Daniel Engström, 18 Nov 2002:
4137 Fixes for x86 port (mostly strings issues)
4138
4139* Patch by Ken Chou, 18 Nov 2002:
4140 Fix for natsemi NIC cards (DP83815)
4141
4142* Patch by Pierre Aubert, 19 Nov 2002:
4143 fix a bug for the MII configuration, and some warnings
4144
wdenk452cfd62002-11-19 11:04:11 +00004145* Patch by Thomas Frieden, 13 Nov 2002:
4146 Add code for AmigaOne board
4147 (preliminary merge to U-Boot, still WIP)
4148
4149* Patch by Jon Diekema, 12 Nov 2002:
4150 - Adding URL for IEEE OUI lookup
4151 - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
4152 being defined.
4153 - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
4154 root-on-nfs macros are designed to switch how the default boot
4155 method gets defined.
4156
wdenk591dda52002-11-18 00:14:45 +00004157* Patch by Daniel Engström, 13 Nov 2002:
4158 Add support for i386 architecture and AMD SC520 board
4159
4160* Patch by Pierre Aubert, 12 Nov 2002:
4161 Add support for DOS filesystem and booting from DOS floppy disk
4162
wdenk2582f6b2002-11-11 21:14:20 +00004163* Patch by Jim Sandoz, 07 Nov 2002:
4164 Increase number of network RX buffers (PKTBUFSRX in
4165 "include/net.h") for EEPRO100 based boards (especially SP8240)
4166 which showed "Receiver is not ready" errors when U-Boot was
4167 processing the receive buffers slower than the network controller
4168 was filling them.
4169
wdenkc217f6d2002-11-11 02:11:37 +00004170* Patch by Andreas Oberritter, 09 Nov 2002:
4171 Change behaviour of NetLoop(): return -1 for errors, filesize
4172 otherwise; return code 0 is valid an means no file loaded - in this
4173 case the environment still gets updated!
4174
4175* Patches by Jon Diekema, 9 Nov 2002:
4176 - improve ADC/DAC clocking on the SACSng board to align
4177 the failing edges of LRCLK and SCLK
4178 - sbc8260 configuration tweaks
4179 - add status LED support for 82xx systems
4180 - wire sspi/sspo commands into command handler; improved error
4181 handlering
4182 - add timestamp support and alternate memory test to the
4183 SACSng configuration
4184
4185* Patch by Vince Husovsky, 7 Nov 2002:
wdenk1272e232002-11-10 22:06:23 +00004186 Add "-n" to linker options to get rid of "Not enough room for
4187 program headers" problem
4188
4189* Patch by David Müller, 05 Nov 2002
4190 Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
4191 so we can use an already existing name
4192
4193* Patch by Pierre Aubert, 05 Nov 2002
4194 Hardware relatied improvments in FDC boot code
4195
4196* Patch by Holger Schurig, 5 Nov 2002:
4197 Make the PXA really change it's frequency
4198
4199* Patch by Pierre Aubert, 05 Nov 2002
4200 Add support for slave serial Spartan 2 FPGAs
4201
4202* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
4203 drivers
4204
wdenk56f94be2002-11-05 16:35:14 +00004205* Add support for log buffer which can be passed to Linux kernel's
4206 syslog mechanism; used especially for POST results.
4207
4208* Patch by Klaus Heydeck, 31 Oct 2002:
4209 Add initial support for kup4k board
4210
wdenk384ae022002-11-05 00:17:55 +00004211* Patch by Robert Schwebel, 04 Nov 2002:
4212 - use watchdog to reset PXA250 systems
4213 - added progress callbacks to (some of the) ARM code
4214 - update for Cogent CSB226 board
4215
4216* Add support for FPS860 board
4217
wdenke95b61c2002-11-04 16:02:40 +00004218* Patch by Guillaume Alexandre,, 04 Nov 2002:
4219 Improve PCI access on 32-bits Compact PCI bus
4220
wdenk24ee89b2002-11-03 17:56:27 +00004221* Fix mdelay() on TRAB - this was still the debugging version with
4222 seconds instead of ms.
4223
4224* Patch by Robert Schwebel, 1 Nov 2002:
4225 XScale related cleanup (affects all ARM boards)
4226
4227* Cleanup of names and README.
wdenkcc1c8a12002-11-02 22:58:18 +00004228
4229======================================================================
wdenk24ee89b2002-11-03 17:56:27 +00004230Notes for U-Boot 0.1.0:
wdenkcc1c8a12002-11-02 22:58:18 +00004231======================================================================
4232
4233This is the initial version of "Das U-Boot", the Universal Boot Loader.
4234
4235It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
4236For information about the history of the project please see the
4237PPCBoot project page at http://sourceforge.net/projects/ppcboot
4238
4239======================================================================