blob: d038fb4f4bb0034c9498cc04051f0e47547ffc83 [file] [log] [blame]
wdenk24ee89b2002-11-03 17:56:27 +00001======================================================================
Stefan Roese5ff4c3f2005-08-15 12:31:23 +02002Changes for U-Boot 1.1.4:
3======================================================================
4
Stefan Roese99644742005-11-29 18:18:21 +01005* Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
6 Patch by John Otken, 23 Nov 2005
7
Stefan Roese42f2a822005-11-27 19:36:26 +01008* Changed PPC44x startup message (cpu info, speed...) to common style:
9 On PPC44x platforms, the startup message generated in "cpu.c" only
10 comprised the ppc type and revision but not additional informations
11 like speed etc. Those speed infos where printed in the board specific
12 code. This new implementation now prints all CPU infos in the common
13 cpu specific code. No board specific code is needed anymore and
14 therefore removed from all current 44x implementations.
15 Patch by Stefan Roese, 27 Nov 2005
16
Wolfgang Denkf3f45182005-11-25 16:38:03 +010017* Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h
18
Wolfgang Denk921c1922005-11-25 10:38:43 +010019* Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.
20 The COPYING file was extended to make clear that these files can be
21 used in non-GPL code, too.
Wolfgang Denkf3f45182005-11-25 16:38:03 +010022 Also, a corresponding note was placed in the headers of the affected files.
Wolfgang Denk921c1922005-11-25 10:38:43 +010023
Stefan Roesec443fe92005-11-22 13:20:42 +010024* Add support for Prodrive P3P440 board:
25 - Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
26 - CFG_FLASH_QUIET_TEST added to use the common CFI driver
27 for bank autodetection
28 Patch by Stefan Roese, 22 Nov 2005
29
Wolfgang Denk86eb3b72005-11-20 21:40:11 +010030* Change all '$(...)' variable references into '${...}'
31 which makes the environment compatible with the hush shell.
32 WARNING: Support for the old '$(...)' syntax will be
33 discontinued in a later version.
34
Rafal Jaworowskice49c272005-11-17 00:26:18 +010035* Minor changes to init flags in TQM834x PCI.
36
Stefan Roesef67d6e62005-11-15 16:26:34 +010037* Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
38 Patch by Stefan Roese, 15 Nov 2005
39
Stefan Roesef2303272005-11-15 10:35:59 +010040* New PPC 405EP board added: CMS700
41 Added CONFIG_NET_MULTI for VOM405 board.
42 Added reset_phy() for VOM405 board.
43 Patch by Matthias Fuchs, 09 Nov 2005
44
Stefan Roese780984e2005-11-08 09:00:09 +010045* Updated PCI mapping for esd CPCI2DP board.
46 Add support for error LED.
47 Patch by Matthias Fuchs, 07 Nov 2005
48
Stefan Roese8c695512005-11-07 13:43:06 +010049* Fix MPC85xx PCI support (pci_register_hose() before pci config access)
50 Patch by Stefan Roese, 07 Nov 2005
51
Stefan Roese259e1192005-11-07 09:57:57 +010052* Correct PPC Timebase register definitions (SPRN_TBRL...)
53 Patch by Stefan Roese, 07 Nov 2005
54
Stefan Roesee8c34722005-11-05 15:50:16 +010055* Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
56 Patch by Stefan Roese, 05 Nov 2005
57
Stefan Roese65a6b7e2005-11-03 08:31:33 +010058* Additional fix for external IRQ config on Yellowstone & Yosemite
59 Patch by Stefan Roese, 03 Nov 2005
60
Stefan Roese08fb4042005-11-01 10:08:03 +010061* Add support for Ocotea pass 3 with 440GX Rev. F
62 Patch by Stefan Roese, 01 Nov 2005
63
Stefan Roesed0ab2f32005-10-28 12:21:06 +020064* Fix external IRQ configuration on Yellowstone & Yosemite
65 Patch by Stefan Roese, 28 Oct 2005
66
Marian Balakowicza14b9762005-10-29 14:48:59 +020067* Add support for multiple PHYs.
Wolfgang Denk323016d2005-10-29 23:50:20 +020068 Tested on the following boards:
69 cmcpu2 (at91rm9200/ether.c)
70 PPChameleon (ppc4xx/4xx_enet.c)
71 yukon (mpc8220/fec.c)
72 uc100 (mpc8xx/fec.c)
73 tqm834x (mpc834x/tsec.c) with EEPRO100
74 lite5200 (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c)
75 Main changes include:
76 common/miiphyutil.c
77 - miiphy_register routine was added to allow multiple PHYs to be registered
78 - miiphy_read and miiphy_write are now defined in this file, and
79 require additional argument (char *devname)
80 - other miiphy_* routines also require additional device name argument
81 ../lib_i386/board.c
82 ../lib_ppc/board.c
83 Calling reset_phy() was moved to be executed *after* eth_initialize().
84 This is necessary as now some of the implementations of reset_phy()
85 may need to use miiphy_reset() which is not allowed before eth_initialize()
86 as eth_initialize registers all required miiphy_* routines.
87 Tested on IP860 and PHY initializes properly after this change.
Marian Balakowicza14b9762005-10-29 14:48:59 +020088
89* Correct includes for flat tree builder.
90
91* Fix conflicting types (flash_write()) in trab auto_update.c.
92
Rafal Jaworowski384da5e2005-10-17 02:39:53 +020093* Add PCI support for the TQM834x board.
94
Stefan Roesede243fef2005-10-20 16:40:17 +020095* Add missing 4xx board to MAKEALL
96 Patch by Stefan Roese, 20 Oct 2005
97
Stefan Roesebcb3b272005-10-20 16:39:16 +020098* Fix conflicting types (flash_write()) in esd auto_update.c
99 Patch by Stefan Roese, 20 Oct 2005
100
Stefan Roesef1d66992005-10-20 16:36:44 +0200101* Fix problem with sleep in NetConsole (use get_timer())
102 Patch by Stefan Roese, 20 Oct 2005
103
Stefan Roese7f98aec2005-10-20 16:34:28 +0200104* Add NetConsole Support for AMCC eval boards
105 Patch by Stefan Roese, 20 Oct 2005
106
Stefan Roesec8136d02005-10-18 19:17:12 +0200107* Fix NetConsole support on 4xx (only print eth link on 1st transfer)
108 Patch by Stefan Roese, 18 Oct 2005
109
Stefan Roese764784c2005-10-14 15:37:34 +0200110* Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo.
Wolfgang Denk30320682005-10-17 00:24:00 +0200111 Fix identation on ext2ls help entry.
Stefan Roese764784c2005-10-14 15:37:34 +0200112 Patch by Stefan Roese, 14 Oct 2005
113
Wolfgang Denkb4bc9b22005-10-15 18:43:50 +0200114* Add support for TQM834x boards.
115 Cleanup.
116
Wolfgang Denk7fb52662005-10-13 16:45:02 +0200117* Cleanup for GCC-4.x
118
Wolfgang Denk74c666c2005-10-13 10:41:25 +0200119* Add documentation for Open Firmware Flat Tree and usage.
120 Patch by Pantelis Antoniou, 13 Oct 2005
121
Wolfgang Denk6a63e362005-10-13 01:59:29 +0200122* Add missing files for Pantelis Antoniou's patch
123 Patch by Pantelis Antoniou, 04 Sep 2005
124
Stefan Roese03510612005-10-10 17:43:58 +0200125* Fix problem in ppc4xx eth-driver without ethaddr (only without
126 CONFIG_NET_MULTI set)
127 Patch by Stefan Roese, 10 Oct 2005
128
Stefan Roese13b93692005-10-08 10:19:07 +0200129* Fix gzip bmp support (test if malloc fails, warning when truncated).
130 Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
131 Patch by Stefan Roese, 07 Oct 2005
132
Wolfgang Denkdfb18422005-10-13 01:49:09 +0200133* Add support for OF flat tree for the STXtc board.
134 Patch by Pantelis Antoniou, 04 Sep 2005
135
Wolfgang Denk27a5b0b2005-10-13 01:45:54 +0200136* Support passing of OF flat trees to the kernel.
137 Patch by Pantelis Antoniou, 04 Sep 2005
138
Wolfgang Denk3193a652005-10-09 01:41:48 +0200139* Cleanup
140
141* Add support for NetSilicon NS7520 processor.
142 Patch by Art Shipkowski, 12 May 2005
143
Wolfgang Denk56811f62005-10-09 01:04:33 +0200144* Add support for AP1000 board.
145 Patch by James MacAulay, 07 Oct 2005
146
Wolfgang Denkfbb97cc2005-10-09 00:33:37 +0200147* Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
148 Patch by Anders Larsen, 07 Oct 2005
149
150 The Atmel errata #11 states that the transfer buffer descriptor
151 table must be aligned on a 16-word boundary. As it turned out, this
152 is insufficient - it seems the table must be aligned on a boundary
153 at least as large as the table itself (in Linux this is not an
154 issue - the table is aligned on a PAGE_SIZE (4096) boundary).
155
Wolfgang Denk23f0d172005-10-09 00:25:58 +0200156* Fixed compilation for ARM when using a (standard) hard-FP toolchain
Wolfgang Denk3193a652005-10-09 01:41:48 +0200157 Patch by Anders Larsen, 07 Oct 2005
Wolfgang Denk23f0d172005-10-09 00:25:58 +0200158
Wolfgang Denk88bd7432005-10-09 00:22:48 +0200159* Cleanup warnings for cpu/arm720t & cpu/arm1136 files.
160 sed the linker scripts, rather than pre-process them.
161 Patch by Peter Pearse, 07 Oct 2005
162
Wolfgang Denk7f88a5e2005-10-06 17:08:18 +0200163* Update make target for ARM supported boards.
164 Use lowlevel_init() instead of platformsetup() [rename].
165 Patch by Peter Pearse, 06 Oct 2005
166
Wolfgang Denk63e44ff2005-10-06 01:50:50 +0200167* Fix booting from serial dataflash on AT91RM9200
168 Patch by Peter Menzebach, 29 Aug 2005
169
Wolfgang Denkd1afd912005-10-06 01:46:57 +0200170* Add JFFS2 support for TRAB board
171 Patch by Martin Krause, 25 Aug 2005
172
Wolfgang Denkd2da2872005-10-06 01:43:39 +0200173* Remove unnecessary dependency of netconsole on CONFIG_NET_MULTI
174 Patch by Marcus Hall, 24 Aug 2005
175
Wolfgang Denk463432f2005-10-06 01:26:16 +0200176* Fix the machine-id of the Cogent csb637 board
177 Patch by Anders Larsen, 05 Oct 2005
178
Wolfgang Denk9a9f2472005-10-06 01:22:22 +0200179* Complete support for the KwikByte KB920x boards
180 Patch by Anders Larsen, 05 Oct 2005
181
Wolfgang Denk1d281202005-10-05 02:06:08 +0200182* Set the AT91RM9200 clock to asynchronous mode
183 Patch by Anders Larsen, 03 May 2005
184
Wolfgang Denk7aea95a2005-10-05 02:02:25 +0200185* Set the AT91RM9200 clock to synchronous mode
186 Patch by Anders Larsen, 29 Apr 2005
187
Wolfgang Denke35470b2005-10-05 02:00:09 +0200188* Add support for Cogent csb637
189 Patch by Anders Larsen, 29 Apr 2005
190
Wolfgang Denkcf25b452005-10-05 01:54:04 +0200191* Fix dm9161.c initialization
192 Patch by Anders Larsen, 29 Apr 2005
193
Wolfgang Denkbc650fa2005-10-05 01:51:29 +0200194* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
195 (8e2be51de8dd03c1ce4d06cbb18ad06133d47cd5)
196
197* Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
198 Patch by Anders Larsen, 29 Apr 2005
199
Wolfgang Denk6f3b1cd2005-10-05 00:25:17 +0200200* Fix device partition intialization for SystemACE disks.
201 Patch by Stephen Williams, 28 Apr 2005
202
Wolfgang Denk9da240c2005-10-05 00:19:34 +0200203* Added support for KwikByte KB920x boards (based on AT91RM9200)
204 Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
205
Wolfgang Denk79fd8e92005-10-05 00:03:55 +0200206* Add support for S29GL064M-R3 flash chip on xsengine board
207 Patch by Kurt Stremerch, 18 Apr 2005
208
Wolfgang Denk29dcbd42005-10-05 00:00:54 +0200209* E500 update: repoint IVPR to RAM when code is relocated
210 Patch by Kylo Ginsberg, 13 Apr 2005
211
Wolfgang Denkdf70a422005-10-04 23:38:07 +0200212* Fix loop end test in lib_generic/string.c:strswab()
213 Patch by Andrew Dyer, October 10, 2005
214 Signed-off-by: Andrew Dyer <amdyer@gmail.com>
215
Wolfgang Denk03f9ba32005-10-04 23:10:28 +0200216* Cleanup
217
218* Update ARM Integrator boards:
219 Correct addessing errors in platform files.
220 Split off common core module data from Integrator header files to
221 include/armcoremodule.h.
222 Patch by Peter Pearse, 04 Oct 2005
223
Wolfgang Denkaba58092005-10-04 22:38:24 +0200224* Make sure only supported compiler options are used
225 Import "cc-option" shell function from kernel and
226 use it to get the correct ARM GCC options for individual CPUs
227 Patch by Peter Pearse, 30 Jun 2005
228
Stefan Roese95258d52005-10-04 15:00:30 +0200229* Fix 440GR to print correct cpu revision
Wolfgang Denk03f9ba32005-10-04 23:10:28 +0200230 Patch by Stefan Roese, 04 Oct 2005
Stefan Roese95258d52005-10-04 15:00:30 +0200231
Stefan Roese5b9ab142005-10-03 15:27:50 +0200232* Change board message on AMCC Yosemite & Yellowstone to common style
Wolfgang Denk03f9ba32005-10-04 23:10:28 +0200233 Patch by Stefan Roese, 03 Oct 2005
Stefan Roese5b9ab142005-10-03 15:27:50 +0200234
Wolfgang Denkb0723792005-09-30 15:18:23 +0200235* Fix compiler warning
236
Wolfgang Denk61d85622005-09-29 12:16:38 +0200237* Fix FEC PHY addresses for TQM85xx boards
238
Wolfgang Denk00b67fd2005-09-28 01:49:47 +0200239* Fix uninitialized variable problem in hush shell
240 Patch by Lars Rostock, 26 Sep 2005
241
Wolfgang Denk2734f8a2005-09-26 23:40:37 +0200242* Undo change of f6e20fc6ca... to include/configs/trab.h
243 (Must have been an accident?)
244
Wolfgang Denk8a6820a2005-09-26 01:26:56 +0200245* Add support for AT91RM9200 OHCI Controller.
246 Patch by Eric Benard, 07 Apr 2005
247
Wolfgang Denkb97b4c62005-09-26 01:18:22 +0200248* Update ARM mach-types.h
249 Patch by Eric Benard, 07 Apr 2005
250
Wolfgang Denk756bfd72005-09-26 01:14:38 +0200251* Add support for MP2USB board.
252 Patch by Eric Benard, 07 Apr 2005
253
Wolfgang Denk4dc11462005-09-26 01:06:33 +0200254* Add board support for armadillo HT1070
255 Patch by Rowel Atienza, 06 Apr 2005
256
Wolfgang Denke0ae0912005-09-26 00:53:02 +0200257* Second Ethernet address enabled for MPC885ADS and MPC8272ADS.
258 Patch by Vitaly Bordug, 30 Mar 2005
259
Wolfgang Denkcba3feb2005-09-26 00:44:15 +0200260* Add iopset command on mpc8xx
261 Patch by Daniel Eisenhut, 25 Mar 2005
262
Wolfgang Denkb8d1f512005-09-26 00:39:59 +0200263* Add support for MII in eepro100 driver.
264 Patch by Gleb Natapov, 21 Mar 2005
265
Wolfgang Denka03f16f2005-09-26 00:29:53 +0200266* Fixes to the Lubbock (PXA 25x) support:
267 - Resolve the FIXME with respect to saving the u-boot environment.
268 - Make the default load address land in real memory.
269 - Fix lan91c96 SMC_{in,out}{b,w,l}() macros
270 Patch by David Brownell, 10 Mar 2005
271
Wolfgang Denka48c7252005-09-25 18:59:36 +0200272* Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
273 Patch by Marc Leeman, 04 Mar 2005
274
Wolfgang Denke1e46792005-09-25 18:41:04 +0200275* OMAP242x H4 board update
276 - fix for ES2 differences.
277 - switch to using the cfi_flash driver.
278 - fix SRAM build address.
279 - fix for GP device operation.
280 - unlock SRAM for GP devices.
281 - display more device information.
282 - fix potential deadlock in omap24xx_i2c driver.
283 - fix DLL load values to match dpllout*1 operation.
284 - fix 2nd chip select init for combo DDR device.
285 - add support for CFI Intel 28F256L18 on H4 board.
286 Patch by Richard Woodruff, 03 Mar 2005
287
Wolfgang Denk712fb8e2005-09-25 17:14:20 +0200288* Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h
289 Patch by Steven Scholz, 02 Mar 2005
290
Wolfgang Denkb6ea6302005-09-25 17:05:57 +0200291* Fix typo in eth.c
292 Patch by Ara Avanesyan, 24 Feb 2005
293
Wolfgang Denk64934202005-09-25 17:02:27 +0200294* Remove unneeded #include <malloc.h>
295 Patch by Ladislav Michl, 22 Feb 2005
296
Wolfgang Denkf90377e2005-09-25 16:59:36 +0200297* Add cramfs support for m68k
298 Patch by Zachary Landau, 21 Feb 2005
299
Wolfgang Denk42ae5672005-09-25 16:56:15 +0200300* Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
Wolfgang Denk34ca9d32005-09-25 18:49:35 +0200301 Patch by Jeff Angielski, 21 Feb 2005
302
Wolfgang Denk017bc0d2005-09-25 16:50:33 +0200303* Fix au1x00_serial baud rate calculation:
304 remove hardcoded cpu clock divisor and use register instead;
305 round up instead of truncate
306 Patch by Andrew Dyer, 15 Feb 2005
307
Wolfgang Denkc38e70c2005-09-25 16:44:21 +0200308* Add Xilinx Spartan3 family FPGA support
Wolfgang Denk017bc0d2005-09-25 16:50:33 +0200309 Patch by Kurt Stremerch, 14 Feb 2005
Wolfgang Denkc38e70c2005-09-25 16:44:21 +0200310
Wolfgang Denka205a8f2005-09-25 16:41:22 +0200311* Fix drivers/cfi_flash.c: use info->reset_cmd instead of FLASH_CMD_RESET
312 Patch by Zachary Landau, 11 Feb 2005
313
Wolfgang Denkb9c93d22005-09-25 16:31:16 +0200314* Fix VOH405 Support
315 Patch by Matthias Fuchs, 25 Sep 2005
316
Wolfgang Denk8cc89d92005-09-25 16:27:55 +0200317* Added support for PCI bridge on MPC8272ADS
318 Patch by Vitaly Bordug, Feb 09 2005
319
Wolfgang Denk5d6879c2005-09-25 16:22:14 +0200320* Update multicore CM9XX support for Integrator AP to allow booting from flash
321 Patch by Jean-Paul Saman, 8 Feb 2005
322
Wolfgang Denkc7ca7cf2005-09-25 16:15:17 +0200323* Fix strswab() to reliably find end of string
324 Patch by Andrew Dyer, 08 Feb 2005
325
Wolfgang Denkff4b91f2005-09-25 16:01:42 +0200326* Fix typos in include/ppc440.h
327 Patch by Andrew E Mileski, 04 Feb 2005
328
Wolfgang Denk70de6132005-09-25 15:57:49 +0200329* Add Vibren (was Accelent) PXA255 IDP Support
330 Patch by Cliff Brake, 04 Feb 2005
331
Wolfgang Denk375a89f2005-09-25 15:39:00 +0200332* Fix tools/bmp_logo.c using incorrect offset to pixel data
333 Patch by Andrew Dyer, 31 Jan 2005
334
Wolfgang Denkadf20a12005-09-25 01:48:28 +0200335* Add ARM946E cpu and core module targets; remap memory to 0x00000000
336 Patch by Peter Pearse, 2 Feb 2005
337
Wolfgang Denk8e6213c2005-09-25 01:20:38 +0200338* Fix error handling in tools/env/fw_env.c
339 Patch by Ara Avanesyan, 01 Feb 2005
340
Wolfgang Denk42a14192005-09-25 01:09:58 +0200341* Fix MGT5100 PSC baudrate calculation
342 Patch by Sebastian Schau, 27 Jan 2005
343
Wolfgang Denkb4567f22005-09-25 00:59:24 +0200344* OMAP242x fix for GP device booting
345 - Add SRAM unlock for GP devices.
346 - Change DDR DLL unlock value to allow DPLLout*1 operation.
347 Patches by Richard Woodruff, 21 Jan 2005:
348
Wolfgang Denk0cbaf642005-09-25 00:53:22 +0200349* Add support for AMD's Pb1x00 eval board;
350 add MII routines to the au1x00 ethernet driver;
351 add USB ohci driver (work in progress)
352 Patch by Thomas Sailer, 20 Jan 2005
353
Wolfgang Denkd3abe5a2005-09-25 00:23:05 +0200354* Update omap5912osk board
355 Use drivers/cfi_flash.c instead of private flash driver;
356 Remove hardcoded personalized settings from omap5912osk.h;
357 Fix spacing with (RO) marks in 'flinfo' output.
358 Patch by Michael Bendzick, 14 Jan 2005
359
Wolfgang Denka37cb302005-09-25 00:00:45 +0200360* Fix warnings for PCI code on ixp
361 Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
362
Wolfgang Denkffb77562005-09-24 23:41:00 +0200363* virtex2 fix for bogus download error messages
364 The virtex2 FPGA download code watches for init going active during
365 a download of config data as an error condition. init also goes
366 active after a configuration is finished in concert with the done
367 signal. So far, the code does not check for done active until all
368 of the configuration data is sent. If configuration data has a few
369 extra pad bytes at the end, this would cause an error message even
370 though the download had suceeded.
371 NOTE: virtex2 slave serial and spartan2 versions may still have the
372 same problem.
373 Patch by Andrew Dyer, 12 Jan 2005
374
Wolfgang Denk07bdb022005-09-24 23:32:48 +0200375* Optimize flash_make_cmd in drivers/cfi_flash.c for little endian
376 Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode"
377 message when probing for nonexistent flash in little endian mode.
378 As a side effect more efficient and smaller code is generated,
379 which is always a Good Thing (TM).
380 Patch by Ladislav Michl, 24 Sep 2005
381
Wolfgang Denk227b5192005-09-24 23:25:46 +0200382* Update for TFTP using a fixed UDP port
383 Use the approved environment variable names. Added "tftpdstp" to
384 allow ports other than 69 per Tolunay Orkun's recommendation.
385 Patch by Jerry Van Baren, 12 Jan 2005
386
Wolfgang Denke3cfce52005-09-24 22:37:32 +0200387* Allow to force TFTP to use a fixed UDP port
388 (Add a configuration option CONFIG_TFTP_PORT and optional env
389 variable tftpport)
390 Patch by Jerry Van Baren, 10 Jan 2005
391
Wolfgang Denkaa9d1522005-09-24 22:05:40 +0200392* Fix ethernet timeouts on dbau1550 and other au1x00 systems
393 Patch by Leif Lindholm, 29 Dec 2004
394
Wolfgang Denkedb65482005-09-24 21:54:50 +0200395* Cleanup: fix broken builds
396
397* Fix PHY address argument passing with mii info command
398 Patch by Andrew Dyer, 28 Dec 2004
399
Wolfgang Denk0ee70772005-09-23 11:05:55 +0200400* Cleanup (PPC4xx is AMCC now)
401
Stefan Roesea34997d2005-09-22 09:16:57 +0200402* esd CPCI2DP board added
403 Patch by Matthias Fuchs, 22 Sep 2005
404
Stefan Roese031dc5c2005-09-22 09:07:15 +0200405* esd PMC405 board updated
406 Patch by Matthias Fuchs, 22 Sep 2005
407
Stefan Roesed9d97742005-09-22 09:04:17 +0200408* Add SM501 support to HH405 board.
409 Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
410 Add support for eeprom write-enable (CFG_EEPROM_WREN).
411 Patch by Stefan Roese, 22 Sep 2005
412
Wolfgang Denkcecb6c72005-09-22 09:34:17 +0200413* Fix autonegotiation in tsec ethernet driver
414 Patch by Stefan Roese, 21 Sep 2005
415
Wolfgang Denk78b7b562005-09-21 15:31:25 +0200416* Fix bug in auto_update (trab board)
417 Patch by Martin Krause, 16 Sep 2005
418
Wolfgang Denkc4df5a42005-09-21 15:24:52 +0200419* Fix computation of framebuffer palette for 8bpp LCD bitmaps
420 Patch by Francesco Mandracci, 16 Sep 2005
421
Wolfgang Denkf67ef1e2005-09-21 10:07:56 +0200422* Update configuration for INKA4x0 board
423
Wolfgang Denk242cc932005-09-21 09:59:55 +0200424* Update configuration for PM854 board
425 Based on patch by R. Loeffl, 20 Jul 2005
426
Stefan Roesedc6472a2005-09-15 14:41:11 +0200427* Add PCI support to TQM8540 and TQM8560 boards
428 Patch by Stefan Roese, 15 Sep 2005
429
Stefan Roese27ea7a92005-09-15 11:34:07 +0200430* Update AMCC Yosemite to get a consistent setup for all AMCC eval
431 boards (baudrate, environment...). Flash driver fixed.
432 Patch by Stefan Roese, 15 Sep 2005
433
Stefan Roese74309032005-09-07 16:21:12 +0200434* Fix problem in 440GP ethernet driver (ebony). Add support for 2nd
435 ethernet port on ebony.
436 Patch by Stefan Roese, 7 Sep 2005
437
Marian Balakowiczfe1444a2005-09-11 15:27:12 +0200438* Added support for mtddevnum and mtddevname variables (mtdparts command)
439
Wolfgang Denk969542b2005-09-13 00:12:33 +0200440* Change default console baud rate for stxxtc board
441
Stefan Roeseac553282005-08-31 12:55:50 +0200442* Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
Stefan Roeseac553282005-08-31 12:55:50 +0200443 Patch by Stefan Roese, 31 Aug 2005
444
Wolfgang Denkd452a1e2005-09-03 02:22:41 +0200445* Fix default command set (don't include CFG_CMD_DISPLAY command)
446 Patch by Pantelis Antoniou, 02 Sep 2005
447
Wolfgang Denka836f2a2005-09-03 01:58:35 +0200448* Cleanup
449
Wolfgang Denkdfa35a22005-09-03 01:23:25 +0200450* Enable SM712 driver support for HMI1001 board.
451
Wolfgang Denke156d472005-08-31 12:30:09 +0200452* Fix problems with ld version 2.16 (dot outside sections problem)
453 Pointed out by Gerhard Jaeger, 31 Aug 2005;
454 cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
455
456* Prepare U-Boot for gcc-4.x: fix global data pointer initialization
457
458* Adjust CS3 timings on HMI1001 board for dot matrix display under Linux
459
460* Add keyboard and dot matrix display support for HMI1001 board.
461
462* Prepare U-Boot for gcc-4.x
463
Wolfgang Denk4dccdc22005-08-24 12:41:18 +0200464* Fixed Bamboo port to enable running without DDR-DIMM
465 (Bamboo has also 64MB onboard DDR)
Stefan Roese0da2de52005-08-24 11:21:36 +0200466 Patch by Stefan Roese, 24 Aug 2005
467
Wolfgang Denk8e4c71f2005-08-23 23:04:40 +0200468* Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
469 now handling all 4xx cpu's
470 Patch by Stefan Roese, 16 Aug 2005
471
Wolfgang Denke489c752005-08-23 22:29:44 +0200472* Fix make dependencies for at91rm9200 and ks8695 cpus
473 Patch by Steven Scholz, 23 Aug 2005
474
Wolfgang Denkcc1850e2005-08-23 22:27:41 +0200475* Add JFFS2 support for TQM5200 board
476
Stefan Roese99200d22005-08-22 17:51:53 +0200477* Add esd cpci5200 and pf5200 boards
478 Patch by Reinhard Arlt, 22 Aug 2005
479
Wolfgang Denkb6c85c42005-08-19 00:55:12 +0200480* Fix sysclock for TQM8540 and TQM8560 boards
481 Patch by Martin Krause, 25 Jul 2005
482
Wolfgang Denk9cf56102005-08-19 00:53:02 +0200483* Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2
484 Patch by Martin Krause, 08 Jun 2005
485
Wolfgang Denke4e5e4e2005-08-19 00:46:54 +0200486* Add new board specific commands for TQM5200/STK52XX
487 - Sound commands (beep, wav, sound)
488 - Test commands (led, can, backlight, rs232)
489 Patch by Martin Krause, 02 May 2005
490
491* Change main clock on CMC-PU2 board from 207 MHz to 179 MHz
Wolfgang Denk990ba892005-08-19 00:36:45 +0200492 because of a bug in the AT91RM9200 CPU PLL
493 Patch by Martin Krause, 22 Apr 2005
494
Wolfgang Denk6ba6bdc2005-08-19 00:08:55 +0200495* Add automatic HW detection for another CMC_PU2 variant
496 Patch by Martin Krause, 20 Apr 2005
497
Wolfgang Denk9226f2b2005-08-18 12:21:16 +0200498* Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration
499 Patch by Martin Krause, 19 Apr 2005
500
Wolfgang Denk71112152005-08-18 11:55:22 +0200501* Fix initialization problem on TQM5200 without SM501
Wolfgang Denk6ba6bdc2005-08-19 00:08:55 +0200502 Patch by Martin Krause, 08 Apr 2005
Wolfgang Denk71112152005-08-18 11:55:22 +0200503
Wolfgang Denk09f940b2005-08-18 11:51:12 +0200504* Add RTC support for STK52XX.200
Wolfgang Denk6ba6bdc2005-08-19 00:08:55 +0200505 Patch by Martin Krause, 07 Apr 2005
Wolfgang Denk09f940b2005-08-18 11:51:12 +0200506
Wolfgang Denk672f2e82005-08-18 01:22:22 +0200507* Add support for IFM o2dnt board
508
Wolfgang Denkc10023e2005-08-16 15:17:53 +0200509* Enable PCI on hmi1001 board
510
Wolfgang Denk79117cd2005-08-16 09:32:45 +0200511* Fix return values of the jffs2 commands ls/fsload/fsinfo,
512 so we can use them to, e.g., check the existence of a file with
513 "if ls foo; then this; else that; fi" in the hush shell
514 Patch by Andreas Engel, 16 August 2005
515
Wolfgang Denk85faa8b2005-08-15 16:03:56 +0200516* Coding style cleanup
517
Wolfgang Denk72fdb6c2005-08-15 15:55:00 +0200518* Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
519 Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
520
Stefan Roese5ff4c3f2005-08-15 12:31:23 +0200521* Check return value of malloc in 440gx_enet.c
522 Patch by Travis B. Sawyer, 18 Jul 2005
523
524* Add Sandburst Metrobox and Sandburst Karef board support packages.
525 Second serial port on 440GX now defined as a system device.
526 Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
527 Patch by Travis B. Sawyer, 12 Jul 2005
528
529======================================================================
wdenk26c58432005-01-09 17:12:27 +0000530Changes for U-Boot 1.1.3:
531======================================================================
532
Wolfgang Denk30b87322005-08-12 23:43:12 +0200533* Minor code cleanup
534
Wolfgang Denk532ba4a2005-08-12 23:36:08 +0200535* Add forgotten new fils from latest VoiceBlue update
536
Wolfgang Denk2b7976a2005-08-12 23:34:51 +0200537* Make bootretry feature work with hush shell.
538 Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
539 Patch by Andreas Engel, 19 Jul 2005
540
Wolfgang Denk804ecb12005-08-12 23:27:18 +0200541* Update Hymod Board Database PHP code in "tools" directory
542 Patch by Murray Jensen, 01 Jul 2005
543
Wolfgang Denkaf03f732005-08-12 23:23:46 +0200544* Make "tr" command use POSIX compliant; export HOSTOS make variable
545 Patch by Murray Jensen, 30 Jun 2005
546
Wolfgang Denk2c9dfca2005-08-12 23:20:59 +0200547* Fix Murray Jensen's mail address.
548 Patch by Murray Jensen, 30 Jun 2005
549
Wolfgang Denk8ff63c22005-08-12 23:15:53 +0200550* Preserve PHY_BMCR during a soft reset.
551 Patch by Carl Riechers, 24 Jun 2005
552
Wolfgang Denkdbb564b2005-08-12 22:56:51 +0200553* VoiceBlue update: eeprom tool can also store firmware version now.
554 eeprom.bin is runable by jumping at load address.
555 Patch by Ladislav Michl, 23 May 2005
556
Wolfgang Denk05178242005-08-12 22:38:37 +0200557* Move the AT91RM9200DK to the ARM Systems list.
558 Patch by Anders Larsen, 26 Apr 2005
Wolfgang Denk30b87322005-08-12 23:43:12 +0200559
Wolfgang Denke25f0522005-08-12 22:35:59 +0200560* Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3
561 Patch by Anders Larsen, 26 Apr 2005
562
Wolfgang Denkbb172092005-08-12 22:32:29 +0200563* measure_gclk() is needed when DEBUG is enabled
564 Patch by Bryan O'Donoghue, 25 Apr 2005
565
Stefan Roesedfced812005-08-12 20:06:52 +0200566* Add UPD-Checksum code, fix problem in net.c (return instead of break)
567 Patch by Reinhard Arlt, 12 Aug 2005
568
Stefan Roese1e8519f2005-08-12 16:56:56 +0200569* esd PCI405 board updated
570 Patch by Matthias Fuchs, 28 Jul 2005
571
Stefan Roese36d3bd02005-08-12 16:52:47 +0200572* esd WUH405 and DU405 board updated
573 Patch by Matthias Fuchs, 27 Jul 2005
574
Stefan Roesef9b85672005-08-12 16:46:35 +0200575* Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I)
576 Patch by Matthias Fuchs, 4 May 2005
577
Stefan Roese1d026382005-08-11 18:03:14 +0200578* Update AMCC Yosemite to get a consistent setup for all AMCC eval
579 boards (baudrate, environment...). Flash driver fixed.
580 Patch by Stefan Roese, 11 Aug 2005
581
Stefan Roese00f0d962005-08-11 17:58:40 +0200582* Changed AMCC Bubinga (405EP) configuration to support 2nd eth port
583 Patch by Stefan Roese, 11 Aug 2005
584
Stefan Roese797d8572005-08-11 17:56:56 +0200585* Add NAND FLASH support for AMCC Bamboo 440EP eval board
586 Patch by Stefan Roese, 11 Aug 2005
587
Wolfgang Denkeb95c852005-08-10 15:14:32 +0200588* Add configuration for IFM AEV FIFO board.
589 Minor coding style cleanup.
590
591* Add configuration for IFM SPI eval board
592
Wolfgang Denk298fed22005-08-10 10:06:25 +0200593* Fix CompactFlash problem on HMI1001 board
594
Wolfgang Denkc0d487b2005-08-09 21:41:20 +0200595* Make new "mtdparts" code build with older compilers
596 Patch by Andrea Scian, 09 Aug 2005
597
Stefan Roeseb30f2a12005-08-08 12:42:22 +0200598* Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to
599 CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design
600 with the 405 defines and the linux kernel defines.
601 Patch by Stefan Roese, 08 Aug 2005
602
Wolfgang Denk16439ee2005-08-09 17:25:22 +0200603* Fix compiler warnings with older GCC versions
604
Wolfgang Denk47f57792005-08-08 01:03:24 +0200605* Add common (with Linux) MTD partition scheme and "mtdparts" command
606
607 Old, obsolete and duplicated code was cleaned up and replace by the
608 new partitioning method. There are two possible approaches now:
609
610 The first one is to define a single, static partition:
611
612 #undef CONFIG_JFFS2_CMDLINE
613 #define CONFIG_JFFS2_DEV "nor0"
614 #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF /* use whole device */
615 #define CONFIG_JFFS2_PART_SIZE 0x00100000 /* use 1MB */
616 #define CONFIG_JFFS2_PART_OFFSET 0x00000000
617
618 The second method uses the mtdparts command line option and dynamic
619 partitioning:
620
621 /* mtdparts command line support */
622 #define CONFIG_JFFS2_CMDLINE
623 #define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2"
624 #define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
625
626 Command line of course produces bigger images, and may be inappropriate
627 for some targets, so by default it's off.
628
Wolfgang Denkcee01142005-08-08 00:47:14 +0200629* Fix build problems for PM856 Board
630
Wolfgang Denk4967d102005-08-08 00:14:41 +0200631* Fix sign extension bug in 'fpga loadb' command;
632 make 'fpga loadb' always print the file header info
633 Patch by Andrew Dyer, 11 Jan 2005
634
Wolfgang Denkfdb87ed2005-08-07 23:55:50 +0200635* Fix errors that occur when accessing SystemACE CF
636 Patch by Jeff Angielski, 09 Jan 2005
Stefan Roeseb30f2a12005-08-08 12:42:22 +0200637
Wolfgang Denkedc10112005-08-06 02:11:33 +0200638* Document switching between U-Boot and PlanetCore on RPXlite
639 by Sam Song, 24 Dec 2004
640
Wolfgang Denke37c98a2005-08-06 02:03:03 +0200641* Fix PowerQUICC II mask detection.
642 Patch by Eugene Surovegin, 20 Dec 2004
Stefan Roeseb30f2a12005-08-08 12:42:22 +0200643
Wolfgang Denk9f191a12005-08-06 01:56:59 +0200644* Add support for Altera NIOS DK1C20 board
645 Patch by Shlomo Kut, 13 Dec 2004
646
Wolfgang Denk8dd4d332005-08-06 01:42:58 +0200647* Add support for ep8248 board
648 Patch by Yuli Barcohen, 12 Dec 2004
649
650 Minor code cleanup.
651
Wolfgang Denkaaa85952005-08-06 01:21:19 +0200652* Fix baudrate setting for KGDB on MPC8260
653 Patch by HoJin, 11 Dec 2004
654
Wolfgang Denk5582de62005-08-06 01:13:19 +0200655* Fix 'mii help' text formatting
656 Patch by Cory Tusar, 10 Dec 2004
Wolfgang Denk8dd4d332005-08-06 01:42:58 +0200657
Wolfgang Denkb077b502005-08-06 01:11:12 +0200658* Fix return code of NFS command
659 Patch by Hiroshi Ito, 11 Dec 2004
660
Wolfgang Denk12f62412005-08-06 01:02:27 +0200661* Fix typo
662
Wolfgang Denk58550cc2005-08-06 00:11:50 +0200663* Fix compiler warnings in cpu/ppc4xx/usbdev.c
664 Patch by Steven Blakeslee, 04 Aug 2005
665
Stefan Roese363330b2005-08-04 17:09:16 +0200666* Add support for AMCC Bamboo PPC440EP eval board
667 Patch by Stefan Roese, 04 Aug 2005
668
Jon Loeligerebc72242005-08-01 13:20:47 -0500669* Patch by Jon Loeliger
670 Fix style issues primarily in 85xx and 83xx boards.
671 - C++ comments
672 - Trailing white space
673 - Indentation not by TAB
674 - Excessive amount of empty lines
675 - Trailing empty lines
676
Wolfgang Denk64bd88f2005-08-05 20:03:38 +0200677* Patch by Ron Alder, 11 Jul 2005
Lunsheng Wang61e61952005-07-29 10:20:29 -0500678 Add Xianghua Xiao and Lunsheng Wang's support for the
679 GDA MPC8540 EVAL board.
680
Eran Liberty9095d4a2005-07-28 10:08:46 -0500681* Patch by Eran Liberty
682 Add support for the Freescale MPC8349ADS board.
683
Wolfgang Denk64bd88f2005-08-05 20:03:38 +0200684* Patch by Jon Loeliger, 25 Jul 2005
Jon Loeliger64a96f52005-07-25 15:38:06 -0500685 Move the TSEC driver out of cpu/mpc85xx as it will be shared
686 by the upcoming mpc83xx family as well.
687
Wolfgang Denk64bd88f2005-08-05 20:03:38 +0200688* Patch by Jon Loeliger, 05 May 2005
Jon Loeliger77a4f6e2005-07-25 14:05:07 -0500689 Implemented support for MPC8548CDS board.
690 Added DDR II support based on SPD values for MPC85xx boards.
691 This roll-up patch also includes bugfies for the previously
692 published patches:
693 DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
694
Wolfgang Denk64bd88f2005-08-05 20:03:38 +0200695* Patch by Jon Loeliger, 10 Feb 2005
Jon Loeliger08d88602005-07-25 12:14:54 -0500696 Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
697
Wolfgang Denk64bd88f2005-08-05 20:03:38 +0200698* Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005
Jon Loeliger3f34a402005-07-25 11:13:26 -0500699 For MPC85xxCDS:
700 Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
701 for faster flash parts.
702 Add documentation for BR/OR for FLASH.
703
Wolfgang Denk64bd88f2005-08-05 20:03:38 +0200704* Patch by Jon Loeliger 08 Feb 2005
Jon Loeliger4fc25e42005-07-25 10:58:39 -0500705 Determine L2 Cache size dynamically on 85XX boards.
706
Wolfgang Denk64bd88f2005-08-05 20:03:38 +0200707* Patch by Jon Loeliger, Kumar Gala 08 Feb 2005
Jon Loeligerf5ad3782005-07-23 10:37:35 -0500708 - Convert the CPM2 based functionality to use new CONFIG_CPM2
709 option rather than a myriad of CONFIG_MPC8560-like variants.
710 Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
711 Eliminates the CONFIG_MPC8560 option entirely. Distributes the
712 new CONFIG_CPM2 option to each 8260 board.
wdenk26c58432005-01-09 17:12:27 +0000713
Wolfgang Denk9733b3c2005-08-05 12:19:30 +0200714* Add support for MicroSys PM856 board
715 Patch by Josef Wagner, 03 Aug 2005
716
Wolfgang Denk9b187432005-08-05 11:47:10 +0200717* Minor fixes to PM854 board
718 Patch by Josef Wagner, 03 Aug 2005
719
Wolfgang Denkcd2a04d2005-08-04 19:45:01 +0200720* Adjust configuration of XENIAX board
721 (chip select and GPIO required for USB operation)
722
Wolfgang Denkc94dea22005-08-04 01:24:19 +0200723* Fix typos in cpu/85xx/start.S which caused DataTLB exception to be
724 routed to the Watchdog handler
725 Patch by Eugene Surovegin, 18 Jun 2005
726
Wolfgang Denk9733b3c2005-08-05 12:19:30 +0200727* (re)enabled scsi commands do_scsi() and do_scsiboot()
Wolfgang Denk6a3d6b02005-08-04 01:14:12 +0200728 Patch by Denis Peter, 06 Dec 2004
729
Wolfgang Denkdec97322005-08-04 01:09:44 +0200730* Fix endianess problem in TFTP / NFS default filenames
731 Patch by Hiroshi Ito, 06 Dec 2004
732
Wolfgang Denk116edc92005-08-03 23:03:54 +0200733* Ignore broadcast status bit in received frames in 8260 FCC ethernet
734 loopback test code
735 Patch by Murray Jensen, 18 Jul 2005
736
Wolfgang Denk31c939b2005-08-03 22:58:55 +0200737* Fix typo in mkconfig script (used == instead of =)
738 Patch by Murray Jensen, 18 Jul 2005
739
Wolfgang Denkdb5f3862005-08-03 22:32:02 +0200740* Cleanup build problems on 64 bit build hosts
741
Wolfgang Denkf164d362005-08-03 10:01:54 +0200742* Update MAINTAINERS file
743
Stefan Roese3e1f1b32005-08-01 16:49:12 +0200744* Patch by Stefan Roese, 01 Aug 2005:
745 - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
746 (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
747 for details.
748 - Sycamore (PPC405GPr) eval board added (Walnut port is extended
749 to run on both 405GP and 405GPr eval boards).
750
751* Patch by Steven Blakeslee, 27 Jul 2005:
752 - Add support for AMCC PPC440EP/GR.
753 - Add support for AMCC Yosemite PPC440EP eval board.
754 - Add support for AMCC Yellowstone PPC440GR eval board.
755
Wolfgang Denk04a3cc12005-07-31 00:30:09 +0200756* Minor fixes for PPChameleon Board:
757 - fix alignment of NAND size
758 - make code do what the comment says
759
Wolfgang Denk1f207042005-07-30 16:45:16 +0200760* Implement h/w sector protection status synchronization at boot.
761 The code is provided for, and was tested on, the Yukon/Alaska
762 and PM520 boards only.
763
764 A bug in flash_real_protect() for the Yukon board was fixed by
765 adding a function that tells if two banks are on one flash chip.
766
Wolfgang Denk157b4f82005-07-28 10:42:26 +0200767* Fix sysmon POST problem: check I2C error codes
768 This fixes a problem of displaying bogus voltages when the voltages
769 are so low that the I2C devices start failing while the rest of the
770 system keeps running.
771
Wolfgang Denk9419a4f2005-07-28 01:50:14 +0200772* Patch by Cedric Vincent, 6 Jul 2005:
773 Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"
774
Wolfgang Denkcd0bf802005-07-21 16:14:36 +0200775* Patch by Jon Loeliger, 20 Jul 2005:
776 Add missing PCI IO port definitions.
777
Wolfgang Denk7d5b5222005-07-21 15:23:29 +0200778* Add CompactFlash support for HMI1001 board.
779
780* Adjust printed board ID for LWMON board.
781
Wolfgang Denk42a08182005-07-21 15:29:22 +0200782* Fix low-level OHCI transfers for ARM920t and MPC5xxx
783
Wolfgang Denk104866b2005-07-21 11:45:50 +0200784* Add new argument format for flash commands to allow for usage like
785 "erase $(addr) +$(filesize)", i. e. a size argument can be used and
786 U-Boot will automaticially find the end of the corresponding sector.
787
stroesee0138782005-07-05 11:35:27 +0000788* Patch by Stefan Roese, 5 Jul 2005:
789 Update uc100 board PHY setup
790
stroese046c4832005-07-01 15:53:57 +0000791* Patch by Stefan Roese, 1 Jul 2005:
792 Fix PHY address for CATcenter board (now correct!)
793
stroese3c890fe2005-06-30 13:06:07 +0000794* Patch by Stefan Roese, 30 Jun 2005:
795 Fix PHY addresses for PPChameleon and CATcenter boards
796 Change MAINTAINER for most esd boards
797
wdenk2b9d1862005-07-04 00:03:16 +0000798* Patch by Detlev Zundel, 30 Jun 2005:
799 Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
800
wdenka2b932d2005-06-27 13:30:03 +0000801* Fix baudrate calculation problem on MPC5200 systems
802
803* Add EEPROM and RTC support for HMI1001 board
804
805* Patch by Detlev Zundel, 20 Jun 2005:
806 Fix initialization of low active GPIO pins on inka4x0 board
807
wdenkb6f9d3c2005-06-20 10:28:38 +0000808* Enable redundant environment, disable HW flash protection of
809 HMI1001 board
810
wdenkd1894de2005-06-20 10:17:34 +0000811* Patch by Travis Sawyer, 10 Jun 2005:
812 Initialize allocated dev and private hw structures
813 after their respective allocation in 440gx_enet.c
814
815* Patch by Steven Scholz, 10 Jun 2005:
816 Fix byteorder problems with second argument of "bootm" with
817 standalone images;
818
wdenk8d414a72005-06-10 10:00:19 +0000819* Add support for HMI1001 board
820
821* Disable "date" and "sntp" commands on TQM866M
822
wdenk5ceea262005-06-05 20:30:43 +0000823* Fix watchdog reset problems on LWMON board
824
wdenkc28149c2005-05-30 23:55:42 +0000825* Patch by Juergen Selent, 17 May 2005:
826 Add support for Funkwerk VoVPN gateway module.
827
828* Cleanup debug code for MPC8220 FEC driver
829
wdenkf593f462005-05-23 10:49:50 +0000830* Extend burst mode RAM test program to take a loop count
831 (0 = infinite)
832
833* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
834 those boards that use it.
835
wdenka21ad7b2005-05-19 22:39:42 +0000836* Patches by Greg Ungerer, 19 May 2005:
837 - add support for the KS8695P (ARM 922 based) CPU
838 - add support for the OpenGear CM4008, CM4116 and CM4148 boards
839
840* Patch by Steven Scholz, 19 May 2005:
841 Add support for CONFIG_SERIAL_TAG on ARM boards
842
wdenk5c71a7a2005-05-16 15:23:22 +0000843* Add PCI support for Sorcery board.
844 Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
845
wdenk4e5bc872005-05-16 14:19:49 +0000846* Fix compile problems caused by new burst mode SDRAM test;
847 make port pins to trigger logic analyzer configurable
848
wdenkf3da7cc2005-05-13 22:49:36 +0000849* Fix timer handling on MPC85xx systems
850
wdenka7316b02005-05-12 22:48:09 +0000851* Fix debug code in omap5912osk flash driver
852
853* Add support for MPC8247 based "IDS8247" board.
854
wdenk827aad32005-05-10 15:51:35 +0000855* Add support for 2 x TSEC interfaces on the TQM8540 board.
856
wdenkeb8f2fb2005-05-09 10:17:32 +0000857* On LWMON we must use the watchdog to reset the board as the CPU
858 genereated HRESET pulse is too short to reset the external
859 circuitry.
860
wdenke339a7a2005-05-07 19:06:32 +0000861* Add test tool to exercise SDRAM accesses in burst mode
862 (as standalone program, MPC8xx/PowerPC only)
863
wdenk757e8892005-05-05 09:13:21 +0000864* Increase CFG_MONITOR_LEN for Rattler board to match actual code
865 size.
866
wdenke84ec902005-05-05 00:04:14 +0000867* Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
wdenkb85efc22005-05-05 09:51:44 +0000868 March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI
869 added to support LZO and LZARI compression modes (undefined by
870 default).
wdenke84ec902005-05-05 00:04:14 +0000871
wdenke02d2ae2005-05-04 23:50:54 +0000872* Fix problem with symbolic links in JFFS2 code.
873
wdenkcc0e8782005-05-04 23:44:59 +0000874* Use linker ASSERT statement to prevent undetected overlapping of
875 sections on PPChameleon board; other boards might use this, too.
876
stroeseecfc2932005-05-03 06:19:57 +0000877* Patch by Stefan Roese, 03 May 2005:
878 Update for P3G4
879 Fix problems in cmd_universe.c
880
881* Patch by Matthias Fuchs, 03 May 2005:
882 Added missing variable declaration in cmd_nand.c
883 Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
884
wdenk8c61fe52005-04-22 15:09:09 +0000885* Fix INKA4x0: use CS1 as gpio_wkup_6 output
886
wdenkfaaa6022005-04-21 21:10:22 +0000887* Fix bug in the SDRAM initialization code for canmb, IceCube and
888 PM520 boards.
889 Fix PHY address for canmb board.
890
wdenk5fa47792005-04-20 14:38:59 +0000891* Cleanup serial console baudrate calculation on AT91RM9200;
892 get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
wdenkf4569932005-04-20 12:36:05 +0000893
stroesec4b78982005-04-20 06:52:40 +0000894* Patch by Matthias Fuchs, 18 Apr 2005:
895 Make PCI target address spaces on PMC405 and CPCI405 boards
896 configurable via environment variables
897
wdenkb21608e2005-04-20 09:28:54 +0000898* Auto-size RAM on canmb board.
899
wdenkf1d0ff42005-04-13 23:15:10 +0000900* Add support for canmb board
901
stroesee6f6b172005-04-13 10:08:39 +0000902* Patch by Stefan Roese, 13 Apr 2005:
903 Update for esd apc405
904
wdenkd0245fc2005-04-13 10:02:42 +0000905* Fixes for TQM8560 board:
906 - fix clock rates
907 - remove debug messages
908 - fix flash sector protection
909
wdenk10164c62005-04-07 22:36:40 +0000910* Patch by Steven Scholz, 07 Apr 2005:
911 Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C
912
wdenkd0245fc2005-04-13 10:02:42 +0000913* Patches by Steven Scholz, 07 Apr 2005:
wdenk10164c62005-04-07 22:36:40 +0000914 Fix compiler warning in altera.c
wdenkd0245fc2005-04-13 10:02:42 +0000915 Fix warning in cpu/arm920t/at91rm9200/i2c.c
wdenk10164c62005-04-07 22:36:40 +0000916
917* Patch by Ladislav Michl, 06 Apr 2005:
918 Fix voiceblue configuration.
919
stroese180e6f12005-04-07 05:35:12 +0000920* Patch by Stefan Roese, 06 Apr 2005:
921 Updates for OCOTEA board:
922 - Changed U-Boot size from 512kByte to 256kByte
923 - Fixed flash driver to support boot from soldered user flash
924 - Added README for switch from PIBS firmware to U-Boot
925
926* Patch by Travis Sawyer, 05 Apr 2005:
927 - Change timer frequency for ppc 440 from 10 ms to 1 ms.
928 Problem found by Andrew Wozniak.
929
wdenk91fcc952005-04-06 13:52:31 +0000930* Patch by Steven Scholz, 06 Apr 2005:
931 - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
932 - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
933
wdenk2a831612005-04-06 00:04:16 +0000934* Patches by Robert Whaley, 29 Nov 2004:
935 - update the pxa-regs.h file for PXA27x chips
936 - add PXA27x based ADSVIX board
937 - add support for MMC on PXA27x processors
938
939* Patch by Andrew E. Mileski, 28 Nov 2004:
940 Fix PPC4xx SPD SDRAM detection bug
941
942* Patch by Hiroshi Ito, 26 Nov 2004:
943 Fix logic of "test -z" and "test -n" commands
944
wdenke085e5b2005-04-05 23:32:21 +0000945* Patch by Ladislav Michl, 05 Apr 2005:
946 Add support for VoiceBlue board.
947
948* Patch by Ladislav Michl, 05 Apr 2005:
949 Fix netboot_common() prototypes.
950
wdenk915b3762005-04-05 22:30:50 +0000951* Patch by Steven Scholz, 05 Apr 2005:
952 Use i.MX watchdog timer for reset_cpu()
953
954* Patch by Steven Scholz, 05 Apr 2005:
955 Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
956 subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
957 (now in interupts.c)
958
wdenkccfe25d2005-04-05 21:57:18 +0000959* Add support for MPC8220 based "sorcery" board.
960
961* Add support for TQM8560 board.
wdenk8e5263c2005-04-05 16:26:47 +0000962
wdenkf41ff3b2005-04-04 23:43:44 +0000963* Add FEC support for TQM8540 board.
964 Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
965
966* Patch by Martin Krause, 04 Apr 2005:
967 Update default configuration for CMC_PU2 board.
968
wdenkc2a84292005-04-04 12:23:03 +0000969* Patch by Steven Scholz, 04 Apr 2005:
wdenk3d3d99f2005-04-04 12:44:11 +0000970 - remove all references to CONFIG_INIT_CRITICAL for ARM based boards
971 - introduce two new configuration options instead:
972 CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
973
974* Patch by Steven Scholz, 04 Apr 2005:
wdenkc2a84292005-04-04 12:23:03 +0000975 Make sure that MDIO clock does not exceed 2.5 MHz on AT91
976
wdenk7af1f9d2005-04-04 12:08:28 +0000977* Fix timer code for ARM systems: make sure that udelay() does not
978 reset timers so it's save to use udelay() in timeout code.
979
wdenk6f1ff382005-04-03 23:35:57 +0000980* Patch by Mathias Küster, 23 Nov 2004:
981 add udelay support for the mcf5282 cpu
982
983* Patch by Tolunay Orkun, 16 November 2004:
984 fix incorrect onboard Xilinx CPLD base address
wdenke085e5b2005-04-05 23:32:21 +0000985
wdenk874c6752005-04-03 23:22:21 +0000986* Patch by Jerry Van Baren, 08 Nov 2004:
987 - Add low-boot option for MPC8260ADS board (if lowboot is selected,
988 the jumper for the HRCW source should select flash. If lowboot is
989 not selected, the jumper for the HRCW source should select the
990 BCSR.
991 - change default load base address to 0x00400000
992
wdenkbc3202a2005-04-03 23:11:38 +0000993* Patch by Yuli Barcohen, 08 Nov 2004:
994 Add support for Analogue & Micro Rattler boards.
995 Tested on Rattler8248.
996
997* Patch by Andre Renaud, 08 Nov 2004:
998 Fix watchdog support in common/lcd.c
999
1000* Patch by Marc Leeman, 05 Nov 2003:
1001 Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
1002 bug only affects the XPC8245 processors
1003
wdenk6d3c6d12005-04-03 22:35:21 +00001004* Patches by Josef Wagner, 29 Oct 2004:
1005 - Add support for MicroSys CPU87 board
1006 - Add support for MicroSys PM854 board
1007
1008* Patch by Jian Zhang, 02 Nov 2004:
1009 Add 16-bit NAND support
1010
wdenk1873b602005-04-03 21:11:16 +00001011* Patch by Scott McNutt, 01 Nov 2004:
1012 Add missing NIOS/NIOS2 support for "iminfo" command
1013
1014* Patch by Detlev Zundel, 29 Oct 2004:
1015 Add missing NIOS/NIOS2 support for "mkimage" tool.
1016
wdenk6148e742005-04-03 20:55:38 +00001017* Patch by David Adair, 27 Oct 2004:
1018 Add missing 440GX SDRAM Controller reset
1019
wdenk1e8d0c52005-04-03 17:23:39 +00001020* Patch by Steven Scholz, 25 Oct 2004:
1021 Declare reset_cpu() in include/common.h instead locally
1022
wdenke0c812a2005-04-03 15:51:42 +00001023* Patch by Yusdi Santoso, 22 Oct 2004:
1024 - Add support for HIDDEN_DRAGON board
1025 - fix endianess problem in driver/rtl1839.c
1026
1027* Patch by Allen Curtis, 21 Oct 2004:
1028 support multiple serial ports
1029
wdenkfa66e932005-04-03 14:52:59 +00001030* Patch by Richard Klingler, 03 Apr 2005:
1031 Add call to eth_halt() in net/net.c when called functions fail
1032 after eth_init() has been called.
1033
1034* Patch by Sam Song, 3 April 2005:
1035 - Update README.Netconsole
1036 - Update README
1037
wdenk336b2bc2005-04-02 23:52:25 +00001038* Prepare for SoC rework of ARM code:
1039 - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL
1040 - rename memsetup into lowlevel_init (function name and source files)
wdenkf9c57a22005-04-03 14:26:46 +00001041 Patch by Steven Scholz, 03 Apr 2005:
1042 - create SoC specific directories include/asm-arm/arch-imx and
1043 include/asm-arm/arch-s3c24x0
wdenk336b2bc2005-04-02 23:52:25 +00001044
wdenk8d5d28a2005-04-02 22:37:54 +00001045* Fix problems with SNTP support;
1046 enable SNTP support in some boards.
1047
wdenk9773ef92005-04-01 15:18:44 +00001048* Patches by Martin Krause, 01 Apr 2005:
1049 - Fix flash erase timeout on CMC_PU2
1050 - Add automatic HW detection for CMC_PU2 and CMC_BASIC
wdenk279b2dd2005-04-01 09:29:14 +00001051
wdenk65ec1102005-04-01 09:14:58 +00001052* Patch by Steven Scholz, 13 March 2005:
1053 fix cache enabling for AT91RM9200
1054
wdenkb4ad9622005-04-01 00:25:43 +00001055* Patch by Masami Komiya, 30 Mar 2005:
1056 add SNTP support and expand time server and time offset fields of
1057 DHCP support. See doc/README.SNTP
1058
1059* Patch by Steven Scholz, 13 Dec 2004:
1060 Fix bug in at91rm920 ethernet driver
1061
wdenk0af9d012005-03-31 23:44:33 +00001062* Patch by Steven Scholz, 13 Dec 2004:
1063 Remove duplicated code by merging memsetup.S files for
1064 at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
1065
wdenk61c636e2005-03-31 18:42:15 +00001066* Patch by Detlev Zundel, 31 Mar 2005:
1067 Cleanup duplicate definition of overwrite_console()
1068
1069* Update TQM5200 configuration;
1070 prepare for Rev. 200 starter kit boards
1071
wdenk194b8392005-03-30 23:28:18 +00001072* Patch by Scott McNutt, 21 Oct 2004:
1073 Add support for Nios-II EPCS Controller core.
1074
1075* Patch by Scott McNutt, 20 Oct 2004:
1076 Nios-II cleanups:
1077 - Add sysid command (Nios-II only).
1078 - Locate default exception trampoline at proper offset.
1079 - Implement I/O routines (readb, writeb, etc)
1080 - Implement do_bootm_linux
1081
wdenka5948882005-03-27 23:41:39 +00001082* Patches by Martin Krause, 22 Mar 2005:
1083 - use TQM5200_auto as MAKEALL target for TQM5200 systems
1084 - add support for SM501 graphics controller
1085 - add support for graphic console on TQM5200
1086 - add support for TQM5200 Rev 200
1087 - cleanup, fix typo in include/configs/TQM5200.h
1088
wdenkff86b722005-03-20 22:33:46 +00001089* Patch by Manfred Baral, 17 Mar 2005:
1090 Fix typo
1091
wdenk6601db22005-03-17 16:43:10 +00001092* Fix RTC configuration for PPChameleon board
1093
1094* Cleanup, fix typo in include/configs/TQM5200.h
1095
stroesee72a7b72005-03-16 20:58:31 +00001096* Patch by Stefan Roese, 16 Mar 2005:
1097 Update for esd auto_update and hh405 board
1098
wdenk8d3d9ed2005-03-16 16:32:26 +00001099* Adapt for U-Boot image size (new features enabled) on TQM5200
1100
wdenk3f3262b2005-03-15 22:56:53 +00001101* Update code for TQM8540 board (and 85xx in general):
1102 - Change the name of the Ethernet driver: MOTO ENET -> ENET
1103 - Reformat boot messages
1104 - Enable redundant environment
1105 - Replace the -O2 optimization flag with -mno-string
1106
wdenkbfad55d2005-03-14 23:56:42 +00001107* Patch by David Brownell, 10 Mar 2005:
1108 Restore copyright statements in OHCI drivers.
1109
1110* Add support for TQM8540 board
1111
wdenka8121e62005-03-14 23:01:03 +00001112* Patch by Detlev Zundel, 14 Mar 2005:
1113 NC650: changed NAND flash addressing to using UPMB
1114
1115* Patch by Stefan Roese, 14 Mar 2005:
stroese4c3d80c2005-03-14 12:56:21 +00001116 Update for esd voh405 fpga image
1117
wdenkf189a0d2005-03-14 13:14:58 +00001118* INKA4x0: Allow initialization of LCD backlight dimming from
1119 "brightness" environment variable.
1120
wdenkb995b0f2005-03-06 01:21:30 +00001121* Add port initialization for digital I/O on INKA4x0
1122
wdenka8121e62005-03-14 23:01:03 +00001123* Patch by Stefan Roese, 01 Mar 2005:
stroesec86a0c82005-03-01 17:26:39 +00001124 Update for esd boards dp405 and hub405
1125
wdenk286dca82005-03-04 11:27:31 +00001126* Fix get_partition_info() parameter error in all other calls
1127 (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).
1128
1129* Enable USB and IDE support for INKA4x0 board
1130
wdenka8121e62005-03-14 23:01:03 +00001131* Patch by Andrew Dyer, 28 Feb 2005:
wdenk286dca82005-03-04 11:27:31 +00001132 fix ext2load passing an incorrect pointer to get_partition_info()
1133 resulting in load failure for devices other than 0
1134
wdenk62fea7e2005-02-27 23:46:58 +00001135* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
1136
wdenkacd05362005-02-24 23:23:29 +00001137* Cleanup USB and partition defines
1138
wdenk99408ba2005-02-24 22:44:16 +00001139* Add support for ext2 filesystems and image timestamps to TQM5200 board
1140
1141* Add reset code for Coral-P on INKA4x0 board
1142
1143* Patch by Martin Krause, 28 Jun 2004:
1144 Update for TRAB board.
1145
1146* Fix some missing "volatile"s in MPC5xxx FEC driver
1147
wdenkb22532e2005-02-07 19:44:17 +00001148* Fix cirrus voltage detection (for CPC45)
1149
wdenkc233db82005-02-04 15:38:08 +00001150* Fix byteorder problem in usbboot and scsiboot commands.
1151
wdenkb7345fc2005-02-04 15:02:06 +00001152* Patch by Cajus Hahn, 04 Feb 2005:
1153 - don't insist on leading '/' for filename in ext2load
1154 - set default partition to useful value (1) in ext2load
1155
1156* Patch by Andrew Dyer, 08 Jan 2005:
1157 fix wrong return codes in ext2 code
1158
wdenkf1276d42005-02-03 23:00:49 +00001159* Removed '--no-warn-mismatch' option from Makefile. This option
1160 makes 'ld' to overlook binary objects compatibility.
1161
1162* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
1163 --end-group) outside of the group. This will make 'ld' to do
1164 _multiple_ search in the library group when resolving symbol
1165 references and do only a _single_ seach in libgcc.a after the group
1166 search.
1167
1168* Fix stability problems on CPC45 board again.
1169
1170* Make image detection for diskboot / usbboot / scsiboot more robust
1171 (also check header checksum)
1172
wdenk81414462005-01-31 22:09:11 +00001173* Update CPC45 board configuration.
1174
1175* Add USB and PCI support for INKA4x0 board
1176
wdenkf6925c72005-01-22 18:26:04 +00001177* Fix IDE stability problems on CPC45 board (needs 2 x EIEIO).
1178
wdenk525d7b62005-01-22 18:13:04 +00001179* Code cleanup
1180
wdenkc86cdb92005-01-12 00:38:03 +00001181* Patch by Robin Getz, 13 Oct 2004:
1182 Add standalone application to change SMC91C111 MAC addresses,
1183 see examples/README.smc91111_eeprom
1184
1185* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
1186 Fix Flash support for ARM Integrator CP.
1187
wdenkcb99da52005-01-12 00:15:14 +00001188* Patch by Richard Woodruff, 10 Jan 2005:
1189 Update support for OMAP2420 (ARM11) and H4 board:
1190 o clean up and add new types to H4 memory probe code.
1191 o fix to work with internal boot.
1192 o added PRCM config III operation.
1193 o fix marginal flash timings.
1194 o add revison ATAG usage.
1195 o enable voltage scaling at power chip.
1196 o fix compile error for i2c.
1197
1198* Fix network problem (error when receiving multiple ARP packets)
1199
1200* Patch by Daniel Poirot, 12 Oct 2004:
wdenkd3341052005-01-09 23:48:14 +00001201 Add support for Wind River sbc405 board
1202
1203* Patch by Rainer Brestan, 12 Oct 2004:
1204 Make examples/Makefile more robust
1205
wdenk91a4f362005-01-09 23:33:49 +00001206* Patch by Sam Song, 11 October 2004:
1207 - Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
1208 - Adjust CPU:BUS frequency ratio 1:1 when core frequency
1209 less than 50MHz
1210
1211* Patch by Sam Song, 10 Oct 2004:
1212 Fix a parameter error in run_command() in main.c
1213
1214* Patch by Richard Woodruff, 01 Oct 2004:
wdenkf8062712005-01-09 23:16:25 +00001215 add support for the TI OMAP2420 processor and its H4 reference
1216 board
1217
1218* Patch by Christian Pellegrin, 24 Sep 2004:
1219 Added support for NE2000 compatible (DP8390, DP83902) NICs.
1220
wdenk96c7a8c2005-01-09 22:28:56 +00001221* Patch by Leif Lindholm, 23 Sep 2004:
1222 add support for the AMD db1550 board
1223
1224* Patch by Travis Sawyer, 15 Sep 2004:
1225 Add CONFIG_SERIAL_MULTI support for ppc4xx,
1226 update README.serial_multi
1227
wdenk68005192005-01-09 21:28:15 +00001228* Patches by David Snowdon, 07 Sep 2004:
1229 - add u-boot.hex target in the top level Makefile
1230 - add support for the UNSW/NICTA PLEB 2 board (pleb2)
1231 - use -mtune=xscale and -march=armv5 options for PXA
1232
wdenkc4cbd342005-01-09 18:21:42 +00001233* Patch by Florian Schlote, 08 Sep 2004:
1234 Add support for SenTec-COBRA5272-board (Coldfire).
1235
wdenk310b4fc2005-01-09 18:12:51 +00001236* Patch by Gleb Natapov, 07 Sep 2004:
1237 mpc824x: set PCI latency timer to a sane value
1238 (is 0 after reset).
1239
1240* Patch by Kurt Stremerch, 03 Sep 2004:
1241 Add bitstream configuration option for fpga command (Xilinx only).
1242
wdenk02ac0212005-01-09 17:19:34 +00001243* Patch by Kurt Stremerch, 03 Sep 2004:
1244 Add Xilinx Spartan2E family FPGA support
1245
1246* Patch by Jeff Angielski, 02 Sep 2004:
1247 Add Added support for H2 revision of the EP8260 board.
1248 Fixed formatting for some of the EP8260 related source files.
1249
wdenk26c58432005-01-09 17:12:27 +00001250* Patch by Jon Loeliger, 02 Sep 2004:
1251 Reset monitor size back to 256 so environment can be written
1252 to flash on MPC85xx ADS and CDS releases.
1253
1254* Patch by Paolo Broggini, 02 Sep 2004:
1255 Make BSS clearing on ARM systems more robust
1256
1257* Patch by Yue Hu and Joe, 01 Sep 2004:
1258 - add PCI support for ixp425;
1259 - add EEPRO100 suppor tfor ixdp425 board.
1260
1261* Fix problem with protected sector detection in driver/cfi_flash.c
1262
1263======================================================================
wdenk1b52e832005-01-02 17:02:54 +00001264Changes for U-Boot 1.1.2:
wdenk6c59edc2004-05-03 20:45:30 +00001265======================================================================
1266
wdenk54070ab2004-12-31 09:32:47 +00001267* Code cleanup, mostly for GCC-3.3.x
1268
1269* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
1270 pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
1271 additional ethernet addresses.
1272
1273* Cleanup drivers/i82365.c - avoid duplication of code
1274
1275* Fix bogus "cannot span across banks" flash error message
1276
1277* Code cleanup
1278
1279* Add support for CompactFlash for the CPC45 Board.
1280
wdenk7f5ad442004-12-19 21:39:27 +00001281* Fix problems with CMC_PU2 flash driver.
1282
wdenk11392db2004-12-19 09:58:11 +00001283* Cleanup:
1284 - avoid trigraph warning in fs/ext2/ext2fs.c
1285 - rename UC100 -> uc100
1286
wdenk51242782004-12-18 22:35:43 +00001287* Add support for UC100 board
1288
stroese91673152004-12-16 18:47:58 +00001289* Patch by Stefan Roese, 16 Dez 2004:
1290 - ext2fs support added
1291 - Tundra universe support added
1292 - Coldfire MCF5249 support added (no preloader needed!)
1293 - MCF5249 board TASREG added
1294 - PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405,
1295 VOM405, WUH405
1296 - some esd boards updated
1297 - memory commands "mdc" and "mwc" added for cyclic read/write
1298 (CONFIG_MX_CYCLIC, see README for further description)
1299
wdenk4ca32362004-12-16 15:52:40 +00001300* Add support for INKA4X0 board
1301
wdenk4025aab2004-12-13 00:18:44 +00001302* Patch by Steven Scholz, 12 Dec 2004:
1303 Fix typo in AT91 memory setup.
1304
wdenkdc130442004-12-12 22:06:17 +00001305* Patch by Martin Krause, 27 Oct 2004:
1306 - add support for "STK52xx" board (including PS/2 multiplexer)
1307 - add hardware detection for TQM5200
1308
wdenkb3a4a702004-12-10 11:40:40 +00001309* Clean up CMC PU2 flash driver
1310
1311* Update MAINTAINERS file
1312
1313* Fix bug in MPC823 LCD driver
1314
wdenkac40ade2004-11-24 23:35:19 +00001315* Fix udelay() on AT91RM9200 for delays < 1 ms.
1316
1317* Enable long help on CMC PU2 board;
1318 fix reset issue;
1319 increase CPU speed from 179 to 207 MHz.
1320
wdenk28375a72004-11-22 22:20:07 +00001321* Fix smc91111 ethernet driver for Xaeniax board (need to handle
1322 unaligned tail part specially).
1323
wdenk20dd2fa2004-11-21 00:06:33 +00001324* Update for AT91RM9200DK and CMC_PU2 boards:
1325 - Enable booting directly from flash
1326 - fix CMC_PU2 flash driver
1327
1328* Fix mkimage usage message
1329
wdenk2ff96812004-11-17 20:44:20 +00001330* Map SRAM on NC650 board
1331
wdenkce5b6a92004-11-02 13:00:33 +00001332* Work around for Ethernet problems on Xaeniax board
1333
wdenk337f5652004-10-28 00:09:35 +00001334* Patch by TsiChung Liew, 23 Sep 2004:
1335 - add support for MPC8220 CPU
1336 - Add support for Alaska and Yukon boards
1337
wdenk222f0632004-10-24 23:54:40 +00001338* Fix configuration for ERIC board (needs more room)
1339
1340* Adjust MIPS compiler options at run-time depending on tools version
1341 ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
1342 "-mcpu=4kc" for old tools)
1343
wdenka48ea0a2004-10-19 22:17:51 +00001344* Add passing of the command line and memory size information to the
1345 kernel on xaeniax board.
1346
wdenk27e628f2004-10-11 23:03:10 +00001347* Enable NAND flash support for NC650 board.
1348
1349* Patch by Thomas Lange 07 Oct 2004:
1350 Updated README for DBAu1x00 boards to match current status
1351
wdenkc3919532004-10-11 22:51:13 +00001352* Patch by Philippe Robin, 28 Sept 2004:
1353 Fix Flash support for Versatile.
1354
1355* Patch by Roger Blofeld, 16 Sep 2004:
1356 Fix timeout for DHCP command retry
1357
wdenk8f08c5b2004-10-11 22:43:02 +00001358* Patch by Pantelis Antoniou, 14 Sep 2004:
1359 Fix early serial hang when CONFIG_SERIAL_MULTI is defined.
1360
1361* Patch by Pantelis Antoniou, 14 Sep 2004:
1362 Kick watchdog when bz-decompressing
1363
wdenk61aa0612004-10-11 22:25:49 +00001364* Fix CFG_HZ problems on AT91RM9200 systems
1365 [Remember: CFG_HZ should be 1000 on ALL systems!]
1366
wdenk391b5742004-10-10 23:27:33 +00001367* Patch by Gridish Shlomi, 30 Aug 2004:
1368 - Add support to revA version of PQ27 and PQ27E.
1369 - Reverted MPC8260ADS baudrate back to original 115200
1370
1371* Patch by Hojin, 17 Sep 2004:
1372 Fix typo in cfi_flash.c
wdenk17b211b2004-10-11 23:10:30 +00001373
wdenk391b5742004-10-10 23:27:33 +00001374* Patch by Mark Jonas, 09 September 2004:
1375 mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
1376 error message
1377
1378* Patch by Mark Jonas, 31 August 2004:
1379 Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
1380 improves FTP performance for MPC5200 systems. Enabled for IceCube
1381 by default.
1382
wdenkadf849c2004-10-10 22:44:24 +00001383* Patch by Michael Bendzick, 30 Aug 2004:
1384 - Improve platform.S code for omap1510inn that detects whether code
1385 is running from SDRAM or not. Patch allows SDRAM to be configured
1386 if code is running out of SRAM at 0x20000000.
1387
1388* Patch by Frederick Klatt, 30 Aug 2004:
1389 Add support for the Wind River SBC8540/SBC8560 boards
1390
wdenke85b7a52004-10-10 22:16:06 +00001391* Configure SX1 board to use drivers/cfi_flash.c
1392
1393* Patches by Michael Bendzick, 30 Aug 2004:
1394 - Configure omap1510inn board to use drivers/cfi_flash.c
1395 - Make drivers/cfi_flash.c protect environment and redundant
1396 environment.
1397
1398* Patch by Steven Scholz, 23 Jun 2004:
1399 - Add script (tools/img2brec.sh) to programm U-Boot into
1400 (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
1401
wdenkef3386f2004-10-10 21:27:30 +00001402* Patches by Scott McNutt, 24 Aug 2004:
1403 - Add support for Altera Nios-II processors.
1404 - Add support for Psyent PCI-5441 board.
1405 - Add support for Psyent PK1C20 board.
1406
wdenk0aeb8532004-10-10 21:21:55 +00001407* Patches by Jon Loeliger, 24 Aug 2004:
1408 - Add support for the MPC8541 and MPC8555 CDS boards
1409 - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
1410 - Convert MPC85xxADS to use common CFI flash driver
wdenk0424e5d2004-10-10 20:23:57 +00001411 - Fix PCI window on MPC85xx; remove unneeded PCI initialization
1412 from board_early_init_f()
1413 - Provide SW workaround for PCI initialization on 85xx CDS
wdenk0424e5d2004-10-10 20:23:57 +00001414
wdenk8596ffd2004-10-10 18:49:14 +00001415* Patches by George G. Davis, 24 Aug 2004:
1416 - Enable ramdisk/initrd tagged param support for omap1610h2_config
1417 - Remove static network setup defaults from mx1ads_config
wdenk767fbd42004-10-10 18:41:04 +00001418 - update ARM boards to use constants from mach-types.h
1419
wdenkcbb52882004-10-10 18:03:33 +00001420* Patch by Gary Jennejohn, 04 Oct 2004:
1421 - fix I2C on at91rm9200
1422 - add support for Ricoh RS5C372A RTC
1423
wdenk70ae5b42004-10-10 17:05:18 +00001424* Patch by Gary Jennejohn, 01 Oct 2004:
1425 - add support for CMC PU2 board
1426 - add support for I2C on at91rm9200
1427
1428* Patch by Gary Jennejohn, 28 Sep 2004:
1429 fix baudrate handling on at91rm9200
1430
wdenk02075fd2004-10-09 23:33:42 +00001431* Patch by Yuli Barcohen, 22 Aug 2004:
1432 - remove ZPC.1900 board-specific flash driver;
1433 switch the port to generic CFI driver;
1434 - port clean-up
1435
wdenke4ef9e82004-10-09 23:28:40 +00001436* Patch by Hinko Kocevar, 21 Aug 2004:
1437 Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
1438
wdenk9ca7bbc2004-10-09 23:25:58 +00001439* Clean up tools/bmp_logo.c to not add trailing white space
1440
1441* Patch by Hinko Kocevar, 21 Aug 2004:
1442 - Group common framebuffer functions in common/lcd.c
1443 - Group common framebuffer macros and #defines in include/lcd.h
1444 - Provide calc_fbsize() for video ATAG
1445
wdenkfb30b4c2004-10-09 22:44:59 +00001446* Patch by Sam Song, 21 August 2004:
1447 - Fix a typo in README
1448 - Align "(RO)" output for "flinfo" after "protect on"
1449 - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
1450 ratio 1:1 when core frequency less than 50MHz
1451
wdenk9ca7bbc2004-10-09 23:25:58 +00001452* Patches by Hinko Kocevar, 21 Aug 2004:
wdenk5fa9b392004-10-09 22:32:26 +00001453 - fix some "use of label at end of compound statement" warnings
1454 - Define type of LCD panel on lubbock board if CONFIG_LCD is used
1455
wdenkf8e9a232004-10-09 22:21:29 +00001456* Patch by Steven Scholz, 16 Aug 2004:
1457 - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
1458 - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
1459 - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
1460 - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
1461 into cpu/arm920t/$(SOC)/
1462
wdenk57bfdd42004-09-29 22:55:14 +00001463* Patches by Sean Chang, 09 Aug 2004:
1464 - Added support for both 8 and 16 bit mode access to System ACE CF
1465 through MPU.
1466 - Fixed missing System ACE CF device during get FAT partition info
1467 in fat_register_device function.
1468 - Enabled System ACE CF support on ML300.
1469
1470* Patch by Sean Chang, 09 Aug 2004:
1471 Synch defines for saveenv and do_saveenv functions so they get
1472 compiled under the same statement.
1473
1474* Patch by Sean Chang, 09 Aug 2004:
wdenk97e8bda2004-09-29 22:43:59 +00001475 - Added I2C support for ML300.
1476 - Added support for ML300 to read out its environment information
1477 stored on the EEPROM.
1478 - Added support to use board specific parameters as part of
1479 U-Boot's environment information.
1480 - Updated MLD files to support configuration for new features
1481 above.
1482
wdenk57bfdd42004-09-29 22:55:14 +00001483* Patches by Travis Sawyer, 05 Aug 2004:
wdenk97e8bda2004-09-29 22:43:59 +00001484 - Remove incorrect bridge settings for eth group 6
1485 - Add call to setup bridge in ppc_440x_eth_initialize
1486 - Fix ppc_440x_eth_init to reset the phy only if its the
1487 first time through, otherwise, just check the phy for the
1488 autonegotiated speed/duplex. This allows the use of netconsole
1489 - only print the speed/duplex the first time the phy is reset.
1490
wdenk7d1eb822004-09-29 11:02:56 +00001491* Patch by Shlomo Kut, 29 Mar 2004:
1492 Add support for MKS Instruments "Quantum" board
1493
1494* Fix build problem with Cogent boards;
1495 avoid using <asm/byteorder.h> when using the host compiler
1496
wdenkd9ee50d2004-09-28 21:51:42 +00001497* Patch by Ganapathi C, 04 Aug 2004:
1498 Fix NFS timeout issue
1499
wdenk99651602004-09-28 21:39:45 +00001500* Patch by Yuli Barcohen, 19 Jul 2004:
1501 - Fix host tools building in Cygwin environment
1502 - Fix header files search order for host tools
1503
1504* Patch by Tom Armistead, 19 Jul 2004:
1505 Fix kgdb.S support for 74xx_75x cpu
1506
wdenka9799ed2004-09-28 21:26:26 +00001507* Patch by Jon Loeliger, 15 Jul 2004:
1508 Fix MPC85xx I2C driver
1509
wdenke2d6d742004-09-28 20:34:50 +00001510* Fix problems with CDROM drive as slave device on Lite5200 IDE bus.
1511
wdenk5b835a32004-09-28 19:00:19 +00001512* Patch by Stephen Williams, 15 July 2004
1513 Set the PCI class code for JSE board as part of PCI interface setup
1514
1515* Patch by Michael Bendzick, 15 Jul 2004:
1516 Fix problem with writes with odd sizes in drivers/cfi_flash.c when
1517 CFG_FLASH_USE_BUFFER_WRITE is set
1518
wdenk20bddb32004-09-28 17:59:53 +00001519* Patch by Yuli Barcohen, 13 Jul 2004:
1520 Allow clock setting on MPC866/MPC885 series chips according to
1521 environment variable `cpuclk'
1522
1523* Patch by Yuli Barcohen, 20 Apr 2004:
1524 Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
1525
wdenkfa89d7c2004-09-28 16:44:41 +00001526* Patch by Vincent Dubey, 24 Sep 2004:
1527 Add support for xaeniax board
1528
wdenkdee058f2004-09-27 20:20:11 +00001529* Add comment about non-GPL character of standalone applications to
1530 COPYING file
1531
1532* Fix FEC ethernet problem on NSCU board.
1533
wdenkb2fc7e12004-09-21 23:33:32 +00001534* Patch by Gary Jennejohn, 09 Sep 2004:
1535 allow to use USART1 as console port on at91rm9200dk boards
1536
stroesea7a4df32004-09-16 12:37:13 +00001537* Patch by Stefan Roese, 16 Sep 2004:
1538 Update AR405 board.
1539
wdenk9e7130b2004-09-09 17:44:35 +00001540* Fix SysClk handling for PPChameleon and CATcenter boards
1541
wdenka0ebde52004-09-08 22:03:11 +00001542* Patch by Detlev Zundel, 08 Sep 2004:
1543 Update etags build target
1544
1545* Improve NetConsole support: add support for broadcast destination
1546 address and buffered input.
1547
1548* Cleanup compiler warnings for GCC 3.3.x and later
1549
1550* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
1551
wdenk0bbcbd22004-08-28 22:45:57 +00001552* Add support for IDS "NC650" board
1553
wdenk79cf7572004-08-28 21:09:14 +00001554* Add automatic update support for LWMON board
1555
1556* Clear Block Lock-Bits when erasing flash on LWMON board.
1557
1558* Fix return code of "fatload" command
1559
1560* Enable MSDOS/VFAT filesystem support for LWMON board
1561
wdenkda54bc92004-08-04 21:56:49 +00001562* Patch by Martin Krause, 03 Aug 2004:
1563 change timing for SM501 graphics controller on TQM5200 module
1564
1565* Patch by Mark Jonas, 13 July 2004:
1566 - Total5200 LCD now run in little endian mode. Endianess conversion
1567 is done in hardware.
wdenk0bbcbd22004-08-28 22:45:57 +00001568 - Removed last reference to "console" environment variable.
wdenkda54bc92004-08-04 21:56:49 +00001569
wdenk6e44b0f2004-08-02 23:39:03 +00001570* Patches by Lars Munch, 12 Jul 2004:
1571 - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
1572 board specific
1573 - split out the LXT971A PHY from ns_9750_eth.h
1574 - split the dm9161 phy part out of at91rm9200_ether.c
1575
wdenkda04a8b2004-08-02 23:22:59 +00001576* Patch by Andreas Engel, 12 Jul 2004:
1577 Replaced hardcoded PL011 clock frequency with config variable.
1578 Fixed wrong CONFIG_CMD_DFL doc.
1579
1580* Patch by Thomas Viehweger, 09 Jun 2004:
1581 make it possible to remove chpart when there is only one partition
1582
wdenkb8fb6192004-08-02 21:11:11 +00001583* Add support for console over UDP (compatible to Ingo Molnar's
1584 netconsole patch under Linux)
1585
wdenk492b9e72004-08-01 23:02:45 +00001586* Patch by Jon Loeliger, 16 Jul 2004:
1587 - support larger DDR memories up to 2G on the PC8540/8560ADS and
1588 STXGP3 boards
1589 - Made MPC8540/8560ADS be 33Mhz PCI by default.
1590 - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
1591 and CONFIG_L2_INIT_RAM options.
1592 - Refactor Local Bus initialization out of SDRAM setup.
1593 - Re-implement new version of LBC11/DDR11 errata workarounds.
1594 - Moved board specific PCI init parts out of CPU directory.
1595 - Added TLB entry for PCI-1 IO Memory
1596 - Updated README.mpc85xxads
1597
wdenk7ac16102004-08-01 22:48:16 +00001598* Patch by Sascha Hauer, 28 Jun:
1599 - add generic support for Motorola i.MX architecture
1600 - add support for mx1ads, mx1fs2 and scb9328 boards
1601
1602* Patches by Marc Leeman, 23 Jul 2004:
1603 - Add define for the PCI/Memory Buffer Configuration Register
1604 - corrected comments in cpu/mpc824x/cpu_init.c
1605
1606* Add support for multiple serial interfaces
1607 (for example to allow modem dial-in / dial-out)
1608
stroese5a668712004-07-15 14:41:43 +00001609* Patch by Stefan Roese, 15 Jul 2004:
1610 cpu/ppc4xx/sdram.c rewritten now using get_ram_size()
1611
wdenk3cc599e2004-08-01 13:09:47 +00001612* Fix NSCU config; add ethernet wakeup code.
1613
wdenk7ac16102004-08-01 22:48:16 +00001614* Add link for preloader for Motorola Coldfire to README.m68k
wdenk3cc599e2004-08-01 13:09:47 +00001615
wdenkbac38cb2004-07-12 22:34:51 +00001616* Patch by Michael Bendzick, 12 Jul 2004:
1617 fix output formatting in drivers/cfi_flash.c
1618
wdenk973f6332004-07-12 14:37:59 +00001619* Patch by Mark Jonas, 02 Jul 2004:
1620 Fix lowboot (again) on MPC5xxx
1621
wdenkfa366cc2004-07-11 22:27:55 +00001622* Patch by Curt Brune, 07 Jul 2004:
1623 relocate exception vectors on arm720t if needed
1624
wdenk82db02f2004-07-11 22:19:26 +00001625* Patch by George G. Davis, 06 Jul 2004:
1626 - update mach-types.h to latest arm.linux.org.uk master list
1627 - Set correct OMAP1610 bi_arch_number for build target
1628
1629* Patch by Curt Brune, 06 Jul 2004:
1630 evb4510: add support for timer interrupt; cleanup
1631
wdenka8c13d42004-07-11 21:49:42 +00001632* Patch by Dan Poirot, 06 Jul 2004:
1633 Fix sbc8260 environment variables
1634
1635* Cleanup redundand "console" environment variable
1636
wdenk7dd13292004-07-11 20:04:51 +00001637* Patch by Mark Jonas, 05 Jul 2004:
1638 add support for the Total5100's and Total5200's LCD screen
1639
1640* Patches by Dan Eisenhut, 01 Jul 2004:
1641 - README fixes.
1642 - Move doc2000.h include to prevent compiler warning on some boards
1643
wdenkcc3f8a92004-07-11 19:17:20 +00001644* Patch by Mark Jonas, 01 Jul 2004:
1645 Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
1646 MGT5100 and MPC5200 based Freescale platforms.
1647
wdenk361f4a22004-07-11 18:10:30 +00001648* Patch by Philippe Robin, 01 Jul 2004:
1649 Add initialization for Integrator and versatile board files.
1650
1651* Patch by Hinko Kocevar, 01 Jun 2004:
1652 Fix VFD FB allocation, add LCD FB allocation on ARM
1653
wdenk64519362004-07-11 17:40:54 +00001654* Patch by Martin Krause, 30 Jun 2004:
1655 Add support for TQM5200 board
1656
1657* Patch by Martin Krause, 29 Jun 2004:
1658 Add loopw command: infinite write loop on address range
1659
wdenk20a61222004-07-10 23:48:41 +00001660* Patches by Yasushi Shoji, 29 Jun 2004:
1661 - add empty include/asm-microblaze/processor.h
1662 - add to CREDITS and MAINTAINERS
1663 - add gd initialization
1664 - add MicroBlaze and SUZAKU board to MAKEALL script
1665 - add reset support for SUZAKU
1666 - add flush_cache() for MicroBlaze
1667 - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
1668 size flash memory on SUZAKU
1669
wdenkb5bb1392004-07-10 23:11:10 +00001670* Patch by Prakash Kumar, 27 Jun 2004:
1671 Add support for the PXA250 based Intrinsyc Cerf board.
1672
1673* Patch by Yasushi Shoji, 27 Jun 2004:
1674 fix comment in include/common.h
1675
wdenk265d2172004-07-10 22:35:59 +00001676* Rename SBC8560 into sbc8560 for consistency
1677
1678* Patch by Daniel Poirot, 24 Jun 2004:
1679 Add support for Wind River's sbc8240 board
1680
1681* Patches by Yasushi Shoji, 26 Jun 2004:
1682 - drivers/serial_xuartlite.c: fix "return 0" in void function
1683 - add microblaze support to mkimage tool
1684
wdenk3203c8f2004-07-10 21:45:47 +00001685* Patch by Fred Klatt, 25 Jun 2004:
wdenk265d2172004-07-10 22:35:59 +00001686 Add support for WindRiver's sbc8560 board
wdenk3203c8f2004-07-10 21:45:47 +00001687
1688* Patch by Nicolas Lacressonniere, 24 Jun 2004
1689 Small Bugs fixes for "at91rm9200dk" board:
1690 - Timing modifications for SPI DataFlash access
1691 - Fix NAND flash detection bug
1692
1693* Patch by Nicolas Lacressonniere, 24 Jun 2004:
1694 Add Support for Flash AT49BV6416 for AT91RM9200DK board
1695
wdenk13eb2212004-07-09 23:27:13 +00001696* Patch by Jon Loeliger, 17 June 2004:
1697 Completion of the 8540ADS/8560ADS updates:
1698 Fix some PCI and Rapid I/O memory maps,
1699 Initialize both TSEC 1 and 2,
1700 Initialize SDRAM
1701 Update MAINTAINER for 85xx boards and README.mpc85xxads
1702
wdenkec5dc0d2004-07-09 22:51:01 +00001703* Patch by Yuli Barcohen, 16 Jun 2004:
1704 Remove obsolete AdderII port which was superseded by unified
1705 AdderII/Adder87x port
1706
1707* Patch by Ladislav Michl, 16 Jun 2004:
1708 Fix gcc-3.3.3 warnings for smc91111.c
1709
stroeseaa192712004-07-02 14:38:26 +00001710* Patch by Stefan Roese, 02 Jul 2004:
1711 - Fix bug in 405 ethernet driver; allocated data not cleared!
1712 - Fix problem in 405 i2c driver; don't try to print without console!
1713
wdenk3ea95e42004-07-01 22:02:29 +00001714* Patch by Paul Ruhland, 11 Jun 2004:
1715 Remove debug code from 'board/lpd7a40x/flash.c'
1716
wdenk99874b42004-07-01 21:40:08 +00001717* Patch by Andrea Marson, 11 Jun 2004:
1718 Update for PPChameleon board:
1719 - support for SysClk @ 25MHz
1720 - support for Silicon Motion SM712 VGA controller
1721 - some clean ups
1722
wdenk3337af42004-07-01 20:28:03 +00001723* Patches by Richard Woodruff, 10 Jun 2004:
1724 - fix problems with examples/stubs.c for GCC >= 3.4
1725 - fix problems with gd initialization
1726
wdenkf2140d52004-07-01 16:30:44 +00001727* Patch by Curt Brune, 17 May 2004:
1728 - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
1729 - Add support for ESPD-Inc. EVB4510 Board
1730
1731* Patch by Marc Leeman, 11 May 2004:
1732 Fix for MPC8245 - reading PPC Memory from another device with the
1733 PPC as PCI target device corrupts data due to interenal hardware
1734 buffering.
1735
wdenk01686632004-06-30 22:59:18 +00001736* Fix "cls" command when used with splash screen
1737
1738* Increase NFS download timeout (now 1 min - 10 sec is to short for a
1739 slow download of a big image)
1740
wdenk0811ded2004-06-25 23:35:58 +00001741* Add "cls" function to MPC823 LCD driver so we can reinitialize the
1742 display even after showing a bitmap
1743
wdenk9e930b62004-06-19 21:19:10 +00001744* Patch by Josef Wagner, 04 Jun 2004:
1745 - DDR Ram support for PM520 (MPC5200)
1746 - support for different flash types (PM520)
1747 - USB / IDE / CF-Card / DiskOnChip support for PM520
1748 - 8 bit boot rom support for PM520/CE520
1749 - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
1750 - I2C and RTC support for CPC45
1751 - support of new flash type (28F160C3T) for CPC45
1752
wdenk9e076902004-06-17 18:50:45 +00001753* Fix flash parameters passed to Linux for PPChameleon board
1754
1755* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
1756
wdenk37bdfdf2004-06-10 21:55:33 +00001757* Patch by Paul Ruhland, 10 Jun 2004:
wdenk9e930b62004-06-19 21:19:10 +00001758 fix support for Logic SDK-LH7A404 board and clean up the
wdenk37bdfdf2004-06-10 21:55:33 +00001759 LH7A404 register macros.
1760
1761* Patch by Matthew McClintock, 10 Jun 2004:
1762 Modify code to select correct serial clock on Sandpoint8245
1763
wdenkefc6f362004-06-10 21:34:36 +00001764* Patch by Robert Schwebel, 10 Jun 2004:
1765 Add support for Intel K3 strata flash.
1766
1767* Patch by Thomas Brand, 10 Jun 2004:
1768 Fix "loads" command on DK1S10 board
1769
wdenk9f664dd2004-06-09 21:50:45 +00001770* Patch by Yuli Barcohen, 09 Jun 2004:
wdenk5b1e6142004-06-09 21:54:22 +00001771 Add support for 8MB flash SIMM and JFFS2 file system on
1772 Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).
1773
1774* Patch by Yuli Barcohen, 09 Jun 2004:
wdenk9f664dd2004-06-09 21:50:45 +00001775 Add support for Analogue&Micro Adder87x and the older AdderII board.
1776
1777* Patch by Ming-Len Wu, 09 Jun 2004:
1778 Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
1779
wdenkec432742004-06-09 21:04:48 +00001780* Patch by Sam Song, 09 Jun 2004:
1781 - Add support for RPXlite_DW board
1782 - Update FLASH driver for 4*AM29DL323DB90VI
1783 - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
1784
wdenk2d644822004-06-09 17:45:32 +00001785* Patch by Mark Jonas, 08 June 2004:
1786 - Make MPC5200 boards evaluate the SVR to print processor name and
1787 version in checkcpu() (cpu/mpc5xxx/cpu.c).
1788
1789* Patch by Kai-Uwe Bloem, 06 May 2004:
1790 Fix endianess problem in cramfs code
1791
wdenkaeba06f2004-06-09 17:34:58 +00001792* Patch by Tom Armistead, 04 Jun 2004:
1793 Add support for MAX6900 RTC
1794
1795* Patches by Ladislav Michl, 03 Jun 2004:
1796 - fix cfi_flash.c on LE systems
1797 - let 'make mrproper' delete u-boot.img as well
1798 - turn printf into debug in cfi_flash.c
1799
wdenk51108172004-06-09 15:37:23 +00001800* Patch by Kurt Stremerch, 28 May 2004:
1801 Add support for Exys XSEngine board
1802
wdenk604b7a12004-06-09 15:29:49 +00001803* Patch by Martin Krause, 27 May 2004:
1804 Fix a MPC5xxx I2C timing issue in i2c_probe().
1805
1806* Patch by Leif Lindholm, 27 May 2004:
1807 Fix board_init_f() for dbau1x00 board.
1808
wdenk920e91b2004-06-09 15:25:53 +00001809* Patch by Imre Deak, 26 May 2004:
1810 On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
1811 Set flash base accordingly, and decide whether to do or skip board
1812 specific setup steps.
1813
1814* Patch by Josef Baumgartner, 26 May 2004:
1815 Add missing define in include/asm-m68k/global_data.h
1816
wdenkd11115a2004-06-09 15:24:18 +00001817* Patch by Josef Baumgartner, 25 May 2004:
1818 Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c
1819
1820* Patch by Paul Ruhland, 24 May 2004:
1821 fix SDRAM initialization for LPD7A400 board.
1822
wdenk79b59372004-06-09 14:58:14 +00001823* Patch by Jian Zhang, 20 May 2004:
1824 add support for environment in NAND flash
1825
wdenk76dd6c72004-06-09 14:47:54 +00001826* Patch by Yuli Barcohen, 20 May 2004:
1827 Add support for Interphase iSPAN boards.
1828
1829* Patches by Paul Ruhland, 17 May 2004:
1830 - Add I/O functions to the smc91111 ethernet driver to support the
1831 Logic LPD7A40x boards.
wdenk3c711762004-06-09 13:37:52 +00001832 - Add support for the Logic Zoom LH7A40x based SDK board(s),
1833 specifically the LPD7A400.
1834
1835* Patches by Robert Schwebel, 15 May 2004:
1836 - call MAC address reading code also for SMSC91C111;
1837 - make SMSC91C111 timeout configurable, remove duplicate code
1838 - fix get_timer() for PXA
1839 - update doc/README.JFFS2
1840 - use "bootfile" env variable also for jffs2
1841
wdenk7e920de2004-06-09 12:47:02 +00001842* Patch by Tolunay Orkun, 14 May 2004:
1843 Add support for Cogent CSB472 board (8MB Flash Rev)
1844
wdenk6568eaa2004-06-09 12:42:26 +00001845* Patch by Thomas Viehweger, 14 May 2004:
1846 - flash.h: more flash types added
1847 - immap_8260.h: some bits added (useful for RMII)
1848 - cmd_coninfo.c: typo corrected, printf -> puts
1849 - reduced size by replacing spaces with tab
1850
wdenk0359dde2004-06-09 10:15:00 +00001851* Patch by Robert Schwebel, 13 May 2004:
1852 Add 'imgextract' command: extract one part of a multi file image.
1853
wdenkcc245992004-06-09 00:51:50 +00001854* Patches by Jon Loeliger, 11 May 2004:
wdenka445ddf2004-06-09 00:34:46 +00001855 Dynamically handle REV1 and REV2 MPC85xx parts.
1856 (Jon Loeliger, 10-May-2004).
1857 New consistent memory map and Local Access Window across MPC85xx line.
1858 New CCSRBAR at 0xE000_0000 now.
1859 Add RAPID I/O memory map.
1860 New memory map in README.MPC85xxads
1861 (Kumar Gala, 10-May-2004)
1862 Better board and CPU identification on MPC85xx boards at boot.
1863 (Jon Loeliger, 10-May-2004)
1864 SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
1865 Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
1866 (Jim Robertson, 10-May-2004)
1867 Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
1868 Supports multiple PHYs.
1869 (Andy Fleming, 10-May-2004)
1870 Some README.MPC85xxads updates.
1871 (Kumar Gala, 10-May-2004)
1872 Copyright updates for "Freescale"
1873 (Andy Fleming, 10-May-2004)
1874
wdenk96fe0d32004-06-09 00:15:33 +00001875* Patch by Stephen Williams, 11 May 2004:
1876 Add flash support for ST M29W040B
1877 Reduce JSE specific flash.c to remove dead code.
1878
wdenk7f1447f2004-06-09 00:10:59 +00001879* Patch by Markus Pietrek, 04 May 2004:
1880 Fix clear_bss code for ARM systems (all except s3c44b0 which
1881 doesn't clear BSS at all?)
1882
1883* Fix "ping" problem on INC-IP board. Strange problem:
1884 Sometimes the store word instruction hangs while writing to one of
1885 the Switch registers, but only if the next instruction is 16-byte
1886 aligned. Moving the instruction into a separate function somehow
1887 makes the problem go away.
1888
wdenk914be132004-06-08 00:22:43 +00001889* Patch by Rishi Bhattacharya, 08 May 2004:
1890 Add support for TI OMAP5912 OSK Board
1891
1892* Patch by Sam Song May, 07 May 2004:
1893 Fix typo of UPM table for rmu board
1894
1895* Patch by Pantelis Antoniou, 05 May 2004:
wdenkc4e854f2004-06-07 23:46:25 +00001896 - Intracom board update.
1897 - Add Codec POST.
1898
wdenk2a6109c2004-06-06 23:53:59 +00001899* Add support for the second Ethernet interface for the 'PPChameleon'
1900 board.
1901
wdenke3a06802004-06-06 23:13:55 +00001902* Patch by Dave Peverley, 30 Apr 2004:
1903 Add support for OMAP730 Perseus2 Development board
1904
1905* Patch by Alan J. Luse, 29 Apr 2004:
1906 Fix flash chip-select (OR0) option register setting on FADS boards.
1907
1908* Patch by Alan J. Luse, 29 Apr 2004:
1909 Report MII network speed and duplex setting properly when
1910 auto-negotiate is not enabled.
1911
1912* Patch by Jarrett Redd, 29 Apr 2004:
1913 Fix hang on reset on Ocotea board due to flash in wrong mode.
1914
wdenk6b1aa8d2004-06-06 22:11:41 +00001915* Patch by Dave Peverley, 29 Apr 2004:
1916 add MAC address detection to smc91111 driver
1917
1918* Patch by David Müller, 28 Apr 2004:
1919 fix typo in lib_arm/board.c
1920
wdenk0e2bd9c2004-06-06 21:51:03 +00001921* Patch by Tolunay Orkun, 20 Apr 2004:
1922 - README update: add CONFIG_CSB272 and csb272_config
1923 - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
1924 i2cfast environment variable
1925
wdenka7556b22004-06-06 21:35:06 +00001926* Patch by Yuli Barcohen, 19 Apr 2004:
1927 - Rename DUET_ADS to MPC885ADS
1928 - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
1929 - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
1930 - Clean up FADS family port to use the new defines
1931
wdenkf8c590b2004-06-01 21:08:17 +00001932* Fix PCI support on CPC45 board
1933
wdenke4adb352004-05-19 21:33:14 +00001934* Patch by Scott McNutt, 25 Apr 2004:
1935 Add Nios GDB/JTAG Console support:
1936 - Add stubs to support gdb via JTAG.
1937 - Add support for console over JTAG.
1938 - Minor cleanup.
1939
wdenkbb33bab2004-05-13 13:23:58 +00001940* Add support for CATcenter board (based on PPChameleon ME module)
1941
wdenke07ec1b2004-05-12 22:54:36 +00001942* Patch by Klaus Heydeck, 12 May 2004:
1943 Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
1944 load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
1945 various changes to KUP4 board specific files
1946
wdenkaf143832004-05-12 22:18:31 +00001947* Fix minor network problem on MPC5200: need some delay between
1948 resetting the PHY and sending the first packet. Implemented in a
1949 "natural" way by invoking the PHY reset and initialization code
1950 only once after power on vs. each time the interface is brought up.
1951
wdenkbd8cf2f2004-05-11 21:53:55 +00001952* Add some limited support for low-speed devices to SL811 USB controller
1953 (at least "usb reset" now passes successfully and "usb info" displays
1954 correct information)
1955
wdenk63a10be2004-05-08 20:33:20 +00001956* Change init sequence for multiple network interfaces: initialize
1957 on-chip interfaces before external cards.
1958
wdenkf248ebc2004-05-05 19:44:41 +00001959* Fix memory leak in the NAND-specific JFFS2 code
1960
1961* Fix SL811 USB controller when attached to a USB hub
1962
wdenk50fc90c2004-05-05 08:31:53 +00001963* Fix config option spelling in PM520 config file
1964
1965* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
1966 patches by Pantelis Antoniou, 30 Mar 2004)
1967
wdenk6c59edc2004-05-03 20:45:30 +00001968* Fix minor NAND JFFS2 related issue
1969
1970* Fixes for SL811 USB controller:
1971 - implement workaround for broken memory stick
1972 - improve error handling
1973
1974* Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better
1975 cope with congested networks.
1976
1977======================================================================
wdenk33591052004-04-12 14:31:43 +00001978Changes for U-Boot 1.1.1:
1979======================================================================
wdenk12490652004-04-18 21:13:41 +00001980
wdenk7ad5e4c2004-04-25 15:41:35 +00001981* Patch by Travis Sawyer, 23 Apr 2004:
1982 Fix VSC/CIS 8201 phy descrambler interoperability timing due to
1983 errata from Vitesse Semiconductor.
wdenk7b370962004-04-25 14:37:29 +00001984
1985* Patch by Philippe Robin, 22 Apr 2004:
wdenke07ec1b2004-05-12 22:54:36 +00001986 Fix ethernet configuration for "versatile" board
wdenk7b370962004-04-25 14:37:29 +00001987
1988* Patch by Kshitij Gupta, 21 Apr 2004:
1989 Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards
1990
1991* Patch by Steven Scholz, 24 Feb 2004:
1992 Fix a bug in AT91RM9200 ethernet driver:
1993 The MII interface is now initialized before accessing the PHY.
1994
wdenk656140b2004-04-25 13:18:40 +00001995* Patch by John Kerl, 19 Apr 2004:
1996 Use U-boot's miiphy.h for PHY register names, rather than
1997 introducing a new header file.
1998
1999* Update pci_ids.h from linux-2.4.26
2000
2001* Patch by Masami Komiya, 19 Apr 2004:
2002 Fix problem cause by VLAN function on little endian architecture
2003 without VLAN environment
2004
wdenkc78bf132004-04-24 23:23:30 +00002005* Clean up the TQM8xx_YYMHz configurations; allow to use the same
wdenk656140b2004-04-25 13:18:40 +00002006 binary image for all clock frequencies. Implement run-time
wdenkc78bf132004-04-24 23:23:30 +00002007 optimization of flash access timing based on the actual bus
2008 frequency.
2009
wdenk20c98a62004-04-23 20:32:05 +00002010* Modify KUP4X board configuration to use SL811 driver for USB memory
2011 sticks (including FAT / VFAT filesystem support)
2012
2013* Add SL811 Host Controller Interface driver for USB
2014
2015* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
2016
2017* Patch by Pantelis Antoniou, 19 Apr 2004:
2018 Allow to use shell style syntax (i. e. ${var} ) with standard parser.
2019 Minor patches for Intracom boards.
2020
2021* Patch by Christian Pell, 19 Apr 2004:
2022 cleanup support for CF/IDE on PCMCIA for PXA25X
2023
wdenke44b9112004-04-18 23:32:11 +00002024* Temporarily disabled John Kerl's extended MII command code because
2025 "miivals.h" is missing
2026
2027* Patches by Mark Jonas, 13 Apr 2004:
2028 - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
2029 - Add sync instructions to IceCube SDRAM init code
2030 - Move SDRAM chip constants into seperate include files
2031 - Unify DDR and SDR initialization code
2032 - Unify all IceCube (Lite5xxx) target names
2033
wdenk61066ec2004-04-18 22:57:51 +00002034* Patch by John Kerl, 16 Apr 2004:
2035 Enable ranges in mii command, e.g. mii read 0-1f 0 or
2036 mii read 4-7 18-1a. Also add mii dump subcommand for
2037 pretty-printing standard regs 0-5.
2038
2039* Patch by Stephen Williams, 16 April 2004:
2040 fix typo in JSE.h; update MAINTAINERS
2041
wdenk19c8fb72004-04-18 22:26:17 +00002042* Patch by Matthew S. McClintock, 14 Apr 2004:
2043 fix initdram function for utx8245 board
2044
2045* Patch by Markus Pietrek, 14 Apr 2004:
2046 use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag
2047
2048* Patch by Reinhard Meyer, 18 Apr 2004:
2049 provide the IDE Reset Function for EMK 5200 boards
2050
2051* Patch by Masami Komiya, 12 Apr 2004:
2052 fix pci_hose_write_config_{byte,word}_via_dword problems
2053
wdenka6270482004-04-18 22:03:42 +00002054* Patch by Sangmoon Kim, 12 Apr 2004:
2055 Update max RAM size for debris board
2056
2057* Patch by Travis Sawyer, 08 Apr 2004:
2058 Add TLB entry for second DIMM slot on ocotea
2059
2060* Patch by Masami Komiya, 08 Apr 2004:
2061 add RTL8169 network driver
2062
wdenk78924a72004-04-18 21:45:42 +00002063* Patch by Dan Malek, 07 Apr 2004:
2064 - Add support for RPC/STx GP3, Motorola 8560 board
2065 - Update 85xx TSEC driver so it searches MII for first available PHY
2066 and uses that one.
2067 - Add functions to support console MII commands.
2068
2069* Patch by Tolunay Orkun, 07 Apr 2004:
wdenka6270482004-04-18 22:03:42 +00002070 Move initialization of bi_iic_fast[]
wdenk78924a72004-04-18 21:45:42 +00002071 from board_init_f() to board_init_r()
2072
2073* Patch by Yasushi Shoji, 07 Apr 2004:
2074 Cleanup microblaze port
2075
2076* Patch by Sangmoon Kim, 07 Apr 2004:
2077 Add auto SDRAM module detection for Debris board
2078
wdenk792c44a2004-04-18 21:17:30 +00002079* Patch by Rune Torgersen, 06 Apr 2004:
2080 - Fix some PCI problems on the MPC8266ADS board
2081 - Fix the location of some PCI entries in the immap structure
2082
wdenk12490652004-04-18 21:13:41 +00002083* Patch by Yasushi Shoji, 07 Apr 2004:
2084 - add support for microblaze processors
2085 - add support for AtmarkTechno "suzaku" board
2086
wdenk8886a662004-04-18 19:43:36 +00002087* Configure PPChameleon board to use redundand environment in flash
2088
2089* Configure PPChameleon board to use JFFS2 NAND support.
2090
2091* Added support for JFFS2 filesystem (read-only) on top of NAND flash
2092
wdenk05939202004-04-18 17:39:38 +00002093* Patch by Rune Torgersen, 16 Apr 2004:
2094 LBA48 fixes
wdenk33591052004-04-12 14:31:43 +00002095
wdenk6203e402004-04-18 10:13:26 +00002096* Patches by Pantelis Antoniou, 16 Apr 2004:
2097 - add support for a new version of an Intracom board and fix
2098 various other things on others.
2099 - add verify support to the crc32 command (define
2100 CONFIG_CRC32_VERIFY to enable it)
2101 - fix FEC driver for MPC8xx systems:
2102 1. fix compilation problems for boards that use dynamic
2103 allocation of DPRAM
2104 2. shut down FEC after network transfers
2105 - HUSH parser fixes:
2106 1. A new test command was added. This is a simplified version of
2107 the one in the bourne shell.
2108 2. A new exit command was added which terminates the current
2109 executing script.
2110 3. Fixed handing of $? (exit code of last executed command)
wdenk05939202004-04-18 17:39:38 +00002111 - Fix some compile problems;
2112 add "once" functionality for the netretry variable
wdenk6203e402004-04-18 10:13:26 +00002113
wdenke5cda752004-04-15 23:23:39 +00002114* Patch by George G. Davis, 02 Apr 2004:
2115 add support for Intel Assabet board
2116
wdenk634d2f72004-04-15 23:14:49 +00002117* Patch by Stephen Williams, 01 Apr 2004:
2118 Add support for Picture Elements JSE board
2119
2120* Patch by Christian Pell, 01 Apr 2004:
2121 Add CompactFlash support for PXA systems.
2122
wdenk3902d702004-04-15 18:22:41 +00002123* Patches by Pantelis Antoniou, 30 Mar 2004:
2124 - add auto-complete support to the U-Boot CLI
2125 - add support for NETTA and NETPHONE boards; fix NETVIA board
wdenk61642172004-04-15 21:16:42 +00002126 - add support for the Epson 156x series of graphical displays
2127 (These displays are serial and not suitable for using a normal
2128 framebuffer console on them)
2129 - add infrastructure needed in order to POST any DSPs in a board
wdenke7047de2004-04-15 21:31:56 +00002130 - improve and fix various things in the MPC8xx FEC driver:
2131 1. The new 87x and 88x series of processors have two FECs,
2132 and the new driver supports them both.
2133 2. Another change in the 87x/88x series is support for
2134 the RMII (Reduced MII) interface. However numerous
2135 changes are needed to make it work since the PHYs
2136 are connected to the same lines. That means that
2137 you have to address them correctly over the MII
2138 interface.
2139 3. We now correctly match the MII/RMII interface
2140 configuration to what the PHY reports.
wdenk145d2c12004-04-15 21:48:45 +00002141 - Fix problem when readingthe MII status register. Due to the
2142 internal design of many PHYs you have to read the register
2143 twice. The problem is more apparent in 10Mbit mode.
2144 - add new mode ".jffs2s" for reading from a NAND device: it just
2145 skips over bad blocks.
2146 - add networking support for VLANs (802.1q), and CDP (Cisco
2147 Discovery Protocol)
wdenk270a8bd2004-04-15 21:58:11 +00002148 - some minor patches / cleanup
wdenk3902d702004-04-15 18:22:41 +00002149
2150* Patch by Yuli Barcohen, 28 Mar 2004:
2151 - Add support for MPC8272 family including MPC8247/8248/8271/8272
2152 - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
2153 - Change configuration method for MPC8260ADS family
2154
wdenk2fb73902004-04-12 16:12:49 +00002155* add startup code to clear the BSS of standalone applications
2156
wdenk33591052004-04-12 14:31:43 +00002157* Fix if / elif handling bug in HUSH shell
2158
2159======================================================================
wdenka9f01392004-04-10 20:44:51 +00002160Changes for U-Boot 1.1.0:
wdenk87249ba2004-01-06 22:38:14 +00002161======================================================================
2162
wdenka09491a2004-04-08 22:31:29 +00002163* Patch by Mark Jonas: Remove config.tmp files only when
2164 unconfiguring the board
2165
2166* Adapt RMU board for bigger flash memory
2167
wdenk65faef92004-03-25 19:29:38 +00002168* Patch by Klaus Heydeck, 13 Mar 2003:
2169 Add support for KUP4X Board
2170
wdenk4d01d9e2004-03-25 14:59:05 +00002171* Patch by Pavel Bartusek, 21 Mar 2004
2172 Add Reiserfs support
2173
2174* Patch by Hinko Kocevar, 20 Mar 2004
2175 - Add auto-release for SMSC LAN91c111 driver
2176 - Add save/restore of PTR and PNR regs as suggested in datasheet
2177
wdenkeec9a3d2004-03-23 23:20:24 +00002178* Patch by Stephen Williams, 19 March 2004
2179 Increase speed of sector reads from SystemACE,
2180 shorten poll timeout and remove a useless reset
2181
2182* Patch by Tolunay Orkun, 19 Mar 2004:
2183 Make GigE PHY 1000Mbps Speed/Duplex detection conditional
2184 (CONFIG_PHY_GIGE)
2185
2186* Patch by Brad Kemp, 18 Mar 2004:
2187 prevent machine checks during a PCI scan
2188
2189* Patch by Pierre Aubert, 18 Mar 2004:
2190 Fix string cleaning in IDE identification
2191
wdenkaea86e42004-03-23 22:53:55 +00002192* Patch by Pierre Aubert, 18 Mar 2004:
2193 - Unify video mode handling for Chips & Technologies 69000 Video
2194 chip and Silicon Motion SMI 712/710/810 Video chip
2195 - Add selection of the video output (CRT or LCD) via 'videoout'
2196 environment variable for the Silicon Motion
2197 - README update
2198
2199* Patch by Pierre Aubert, 18 Mar 2004:
2200 include/common.h typo fix
2201
2202* Patches by Tolunay Orkun, 17 Mar 2004:
2203 - Add support for bd->bi_iic_fast[] initialization via environment
2204 variable "i2cfast" (CONFIG_I2CFAST)
2205 - Add "i2cfast" u-boot environment variable support for csb272
2206
wdenk8d4d1f62004-03-23 22:37:33 +00002207* Patch by Carl Riechers, 17 Mar 2004:
2208 Ignore '\0' characters in console input for use with telnet and
2209 telco pads.
2210
2211* Patch by Leon Kukovec, 17 Mar 2004:
2212 typo fix for strswab prototype #ifdef
2213
wdenk42c05472004-03-23 22:14:11 +00002214* Patches by Thomas Viehweger, 16 Mar 2004:
2215 - show PCI clock frequency on MPC8260 systems
2216 - add FCC_PSMR_RMII flag for HiP7 processors
2217 - in do_jffs2_fsload(), take load address from load_addr if not set
2218 explicit, update load_addr otherwise
2219 - replaced printf by putc/puts when no formatting is needed
2220 (smaller code size, faster execution)
2221
wdenkf16b5162004-03-23 21:43:07 +00002222* Patch by Phillippe Robin, 16 Mar 2004:
2223 avoid dereferencing NULL pointer in lib_arm/armlinux.c
2224
2225* Patch by Stephen Williams, 15 Mar 2004:
2226 Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation
2227
2228* Patch by Tolunay Orkun, 15 Mar 2004:
2229 Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()
2230
2231* Patch by Travis Sawyer, 15 Mar 2004:
2232 Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port
2233
wdenkc12081a2004-03-23 20:18:25 +00002234* Add start-up delay to make sure power has stabilized before
2235 attempting to switch on USB on SX1 board.
2236
2237* Patch by Josef Wagner, 18 Mar 2004:
2238 - Add support for MicroSys XM250 board (PXA255)
2239 - Add support for MicroSys PM828 board (MPC8280)
2240 - Add support for 32 MB Flash on PM825/826
2241 - new SDRAM refresh rate for PM825/PM826
2242 - added support for MicroSys PM520 (MPC5200)
2243 - replaced Query by Identify command in CPU86/flash.c
2244 to support 28F160F3B
2245
2246* Fix wrap around problem with udelay() on ARM920T
2247
2248* Add support for Macronix flash on TRAB board
2249
wdenk18bd81e2004-03-17 01:13:07 +00002250* Patch by Pierre Aubert, 15 Mar 2004:
2251 Fix buffer overflow in IDE identification
2252
2253* Fix power-off of LCD for out-of-band temperatures on LWMON board
2254
2255* Remove redundand #define in IceCube.h
2256
wdenk0ef49462004-03-15 09:00:01 +00002257* Patch by Steven Scholz, 27 Feb 2004:
2258 - Adding get_ticks() and get_tbclk() for AT91RM9200
2259 - Many white space fixes in cpu/at91rm9200/interrupts.c
2260
2261* Patches by Steven Scholz, 20 Feb 2004:
2262 some cleanup in AT91RM9200 related code
2263
wdenked2ac4b2004-03-14 18:23:55 +00002264* Patches by Travis Sawyer, 12 Mar 2004:
2265 - Fix Gigabit Ethernet support for 440GX
2266 - Add Gigabit Ethernet Support to MII PHY utilities
2267
2268* Patch by Brad Kemp, 12 Mar 2004:
2269 Fixes for drivers/cfi_flash.c:
2270 - Better support for x8/x16 implementations
2271 - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
2272 - Added defines for AMD command and address constants
2273
2274* Patch by Leon Kukovec, 12 Mar 2004:
2275 Fix get_dentfromdir() to correctly handle deleted dentries
wdenkc35ba4e2004-03-14 22:25:36 +00002276
wdenked2ac4b2004-03-14 18:23:55 +00002277* Patch by George G. Davis, 11 Mar 2004:
2278 Remove hard coded network settings in TI OMAP1610 H2
2279 default board config
2280
2281* Patch by George G. Davis, 11 Mar 2004:
2282 add support for ADS GraphicsClient+ board.
2283
wdenk18bd81e2004-03-17 01:13:07 +00002284* Patch by Pierre Aubert, 11 Mar 2004:
wdenke55402c2004-03-14 16:51:43 +00002285 - add bitmap command and splash screen support in cfb console
2286 - add [optional] origin in the bitmap display command
2287
2288* Patch by Travis Sawyer, 11 Mar 2004:
2289 Fix ocotea board early init interrupt setup.
2290
2291* Patch by Thomas Viehweger, 11 Mar 2004:
2292 Remove redundand code; add PCI-specific bits to include/mpc8260.h
2293
wdenke28cf632004-03-14 15:20:55 +00002294* Patch by Stephan Linz, 09 Mar 2004
2295 - Add support for the SSV ADNP/ESC1 (Nios Softcore)
2296
2297* Patch by George G. Davis, 9 Mar 2004:
2298 fix recent build failure for SA1100 target
2299
2300* Patch by Travis Sawyer, 09 Mar 2004:
2301 Support native interrupt mode for the IBM440GX.
2302 Previously it was running in 440GP compatibility mode.
2303
wdenk4989f872004-03-14 15:06:13 +00002304* Patch by Philippe Robin, 09 Mar 2004:
2305 Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
2306 Platform support.
2307
2308* Patch by Masami Komiya, 08 Mar 2004:
2309 Don't overwrite server IP address or boot file name
2310 when the boot server does not return values
2311
wdenk18bd81e2004-03-17 01:13:07 +00002312* Patch by Tolunay Orkun, 5 Mar 2004:
wdenk4989f872004-03-14 15:06:13 +00002313 Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
2314
wdenk369d43d2004-03-14 14:09:05 +00002315* Patch by Tolunay Orkun, 5 Mar 2004:
2316 Fix early board initialization for Cogent CSB272 board
2317
2318* Patch by Ed Okerson, 3 Mar 2004:
2319 fix CFI flash writes for little endian systems
2320
2321* Patch by Reinhard Meyer, 01 Mar 2004:
2322 generalize USB and IDE support for MPC5200 with according
2323 changes to IceCube.h and TOP5200.h
2324 add Am29LV256 256 MBit FLASH support for TOP5200 boards
2325 add info about USB and IDE to README
2326
wdenkacd9b102004-03-14 00:59:59 +00002327* Patch by Yuli Barcohen, 4 Mar 2004:
2328 Fix problems with GCC 3.3.x which changed handling of global
2329 variables explicitly initialized to zero (now in .bss instead of
2330 .data as before).
2331
2332* Patch by Leon Kukovec, 02 Mar 2004:
2333 add strswab() to fix IDE LBA capacity, firmware and model numbers
2334 on little endian machines
2335
2336* Patch by Masami Komiya, 02 Mar 2004:
2337 - Remove get_ticks() from NFS code
2338 - Add verification of RPC transaction ID
2339
2340* Patch by Pierre Aubert, 02 Mar 2004:
2341 cleanup for IDE and USB drivers for MPC5200
2342
2343* Patch by Travis Sawyer, 01 Mar 2004:
wdenk00fe1612004-03-14 00:07:33 +00002344 Ocotea:
2345 - Add IBM PPC440GX Ref Platform support (Ocotea)
2346 Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
2347 Adapted to U-Boot and 440GX port
2348 440gx_enet.c:
2349 - Add gracious handling of all Ethernet Pin Selections for 440GX
2350 - Add RGMII selection for Cicada CIS8201 Gigabit PHY
2351 ppc440.h:
2352 - Add needed bit definitions
2353 - Fix formatting
2354
2355* Patch by Carl Riechers, 1 Mar 2004:
2356 Add PPC440GX prbdv0 divider to fix memory clock calculation.
2357
2358* Patch by Stephan Linz, 27 Feb 2004
2359 - avoid problems for targets without NFS download support
2360
wdenkf602aa02004-03-13 23:29:43 +00002361* Patch by Rune Torgersen, 27 Feb 2004:
2362 - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
2363 - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
2364 - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
2365
2366* Patch by Masami Komiya, 27 Feb 2004:
2367 Fix rarpboot: add autoload by NFS
2368
2369* Patch by Dan Eisenhut, 26 Feb 2004:
2370 fix flash_write return value in saveenv
2371
2372* Patch by Stephan Linz, 11 Dec 2003
2373 expand config.mk to avoid trigraph warnings on NIOS
2374
2375* Rename "BMS2003" board into "HMI10"
2376
wdenk05822bf2004-03-12 15:38:25 +00002377* SX1 patches: use "serial#" for USB serial #; use redundand environment
2378 storage; auto-set console on USB port (using preboot command)
2379
wdenk29e7f5a2004-03-12 00:14:09 +00002380* Add support for SX1 mobile phone; add support for USB-based console
2381 (enable with "setenv stdout usbtty; setenv stdin usbtty")
2382
wdenk0a12b752004-03-11 22:46:36 +00002383* Fix LOWBOOT configuration for MPC5200 with DDR memory
2384
wdenk0e2874cb2004-03-02 14:05:39 +00002385* Fix SDRAM timings for LITE5200 / IceCube board
2386
2387* Handle Auti-MDIX / connection status for INCA-IP
2388
2389* Fix USB problems when attempting to read 0 bytes
2390
wdenk372f0302004-02-27 08:21:54 +00002391* Patch by Travis Sawyer, 26 Feb 2004:
2392 Fix broken compile for XPEDITE1K target.
2393
2394* Patch by Stephan Linz, 26 Feb 2004:
2395 Bug fix for NFS code on NIOS targets
wdenk29e7f5a2004-03-12 00:14:09 +00002396
wdenk372f0302004-02-27 08:21:54 +00002397* Patch by Stephen Williams, 26 Feb 2004:
2398 Break up SystemACE reads of large block counts
2399
wdenk6ea1cf02004-02-27 08:20:54 +00002400* Patch by Pierre Aubert, 26 Feb 2004
2401 add IDE support for MPC5200
2402
2403* Patch by Masami Komiya, 26 Feb 2004:
2404 add autoload via NFS
2405
2406* Patch by Stephen Williams
2407 Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
2408 elsewhere in the source.
2409
wdenkd729d302004-02-27 00:07:27 +00002410* Patch by Steven Scholz, 25 Feb 2004:
2411 - Timeouts in FPGA code should be based on CFG_HZ
2412 - Minor cleanup in code for Altera FPGA ACEX1K
2413
2414* Patch by Steven Scholz, 25 Feb 2004:
2415 Changed "Directory Hierarchy" section in README
2416
2417* Patch by Masami Komiya, 25 Feb 2004:
2418 Reduce copy count in nfs_read_reply() of NFS code
2419
wdenk5f495752004-02-26 23:46:20 +00002420* Patch by Markus Pietrek, 24 Feb 2004:
2421 NS9750 DevBoard added
2422
wdenk6ea1cf02004-02-27 08:20:54 +00002423* Patch by Pierre Aubert, 24 Feb 2004
wdenk5f495752004-02-26 23:46:20 +00002424 add USB support for MPC5200
2425
2426* Patch by Steven Scholz, 24 Feb 2004:
2427 - fix MII commands to use values from last command
2428
2429* Patch by Torsten Demke, 24 Feb 2004:
2430 Add support for the eXalion platform (SPSW-8240, F-30, F-300)
2431
wdenkdb82c8e2004-02-26 23:01:04 +00002432* Patch by Rahul Shanbhag, 19 Feb 2004:
2433 Fixes for for OMAP1610 board:
2434 - shift some IRQ specific code to platform.S file
2435 - remove duplicatewatchdog reset code from start.S
2436
2437* Make Auto-MDIX Support configurable on INCA-IP board
2438
2439* Fix license for mkimage tool
2440
wdenk77ef4c62004-02-24 22:33:21 +00002441* Patch by Masami Komiya, 24 Feb 2004:
2442 Update NetBootFileXferSize in NFS code
2443
2444* Patch by Scott McNutt, 24 Feb 2004:
2445 fix packet length in NFS code
2446
wdenkbe9c1cb2004-02-24 02:00:03 +00002447* Patch by Masami Komiy, 22 Feb 2004:
2448 Add support for NFS for file download
2449
wdenkb98ac282004-02-24 00:16:43 +00002450* Patch by Andrea Scian, 17 Feb 2004:
2451 Add support for S3C44B0 processor and DAVE B2 board
2452
2453* Patch by Steven Scholz, 20 Feb 2004:
2454 - Add support for MII commands on AT91RM9200 boards
2455 - some cleanup in AT91RM9200 ethernet code
2456
wdenke537b3b2004-02-23 23:54:43 +00002457* Patch by Peter Ryser, 20 Feb 2004:
2458 Add support for the Xilinx ML300 platform
2459
2460* Patch by Stephan Linz, 17 Feb 2004:
2461 Fix watchdog support for NIOS
2462
2463* Patch by Josh Fryman, 16 Feb 2004:
2464 Fix byte-swapping for cfi_flash.c for different bus widths
2465
2466* Patch by Jon Diekema, 14 Jeb 2004:
2467 Remove duplicate "FPGA Support" notes from the README file
2468
wdenke97d3d92004-02-23 22:22:28 +00002469* Patches by Reinhard Meyer, 14 Feb 2004:
2470 - update board/emk tree; use common flash driver
2471 - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
2472 [adapted for other PPC CPUs -- wd]
2473 - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
2474
2475* Patch by Jon Diekema, 13 Feb 2004:
2476 Call show_boot_progress() whenever POST "FAILED" is printed.
2477
2478* Patch by Nishant Kamat, 13 Feb 2004:
2479 Add support for TI OMAP1610 H2 Board
2480 Fixes for cpu/arm926ejs/interrupt.c
2481 (based on Richard Woodruff's patch for arm925, 16 Oct 03)
2482 Fix for a timer bug in OMAP1610 Innovator
2483 Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
2484
2485* Patches by Stephan Linz, 12 Feb 2004:
2486 - add support for NIOS timer with variable period preload counter value
2487 - prepare POST framework support for NIOS targets
2488
2489* Patch by Denis Peter, 11 Feb 2004:
2490 add POST support for the MIP405 board
2491
wdenkf70cbb22004-02-23 20:48:38 +00002492* Patch by Laurent Mohin, 10 Feb 2004:
2493 Fix buffer overflow in common/usb.c
2494
2495* Patch by Tolunay Orkun, 10 Feb 2004:
2496 Add support for Cogent CSB272 board
2497
wdenk2ebee312004-02-23 19:30:57 +00002498* Patch by Thomas Elste, 10 Feb 2004:
2499 Add support for NET+50 CPU and ModNET50 board
2500
2501* Patch by Sam Song, 10 Feb 2004:
2502 Fix typos in cfi_flash.c
2503
2504* Patch by Leon Kukovec, 10 Feb 2004
2505 Fixed long dir entry slot id calculation in get_vfatname
2506
2507* Patch by Robin Gilks, 10 Feb 2004:
2508 add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
2509 !=, <>, <, >, <=, >=)
2510
wdenkef893942004-02-23 16:11:30 +00002511* Fix problem with side effects in macros in include/usb.h
2512
2513* Patch by David Benson, 13 Nov 2003:
2514 bug 841358 - fix TFTP download size limit
2515
2516* Fixing bug 850768:
2517 improper flush_cache() in load_serial()
2518
2519* Fixing bug 834943:
2520 MPC8540 - missing volatile declarations
2521
2522* Patch by Stephen Williams, 09 Feb 2004:
2523 Add support for Xilinx SystemACE chip:
2524 - New files common/cmd_ace.c and include/systemace.h
2525 - Hook systemace support into cmd_fat and the partition manager
2526
2527* Patch by Travis Sawyer, 09 Feb 2004:
2528 Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
2529
wdenk56ed43e2004-02-22 23:46:08 +00002530* Patch by Travis Sawyer, 09 Feb 2004:
2531 o 440GX:
2532 - Fix PCI Indirect access for type 1 config cycles with ppc440.
2533 - Add phymode for 440 enet
2534 - fix pci pre init
2535 o XPedite1K:
2536 - Change board_pre_init to board_early_init_f
2537 - Add user flash to bus controller setup
2538 - Fix pci pre init
2539 - Fix is_pci_host to check GPIO for monarch bit
2540 - Force xpedite1k to pci conventional mode (via #define option)
2541
2542* Patch by Brad Kemp, 4 Feb 2004:
2543 - handle the machine check that is generated during the PCI scans
2544 on 82xx processors.
2545 - define the registers used in the IMMR by the PCI subsystem.
2546
2547* Patch by Pierre Aubert, 03 Feb 2004:
2548 cpu/mpc5xxx/start.S: copy MBAR into SPR311
2549
2550* Patch by Jeff Angielski, 03 Feb 2004:
2551 Fix copy & paste error in cpu/mpc8260/pci.c
2552
2553* Patch by Reinhard Meyer, 24 Jan 2004:
2554 Fix typo in cpu/mpc5xxx/pci_mpc5200.c
2555
wdenk4dd56e52004-02-20 22:02:48 +00002556* Add Auto-MDIX support for INCA-IP
2557
wdenke65527f2004-02-12 00:47:09 +00002558* Some code cleanup
2559
2560* Patch by Josef Baumgartner, 10 Feb 2004:
2561 Fixes for Coldfire port
2562
2563* Patch by Brad Kemp, 11 Feb 2004:
2564 Fix CFI flash driver problems
2565
wdenk88d73b52004-02-11 21:35:18 +00002566* Make sure to use a bus clock divider of 2 only when running TQM8xxM
2567 modules at CPU clock frequencies above 66 MHz.
wdenke65527f2004-02-12 00:47:09 +00002568
wdenk88d73b52004-02-11 21:35:18 +00002569* Optimize flash programming speed for LWMON (by another 100% :-)
2570
wdenk6cfa84e2004-02-10 00:03:41 +00002571* Patch by Jian Zhang, 3 Feb 2004:
2572 - Changed the incorrect FAT12BUFSIZE
2573 - data_begin in fsdata can be negative. Changed it to be short.
2574
wdenkc0bc2e12004-02-09 23:12:24 +00002575* Patches by Stephan Linz, 30 Jan 2004:
2576 1: - board/altera/common/flash.c:flash_erase():
2577 o allow interrupts befor get_timer() call
2578 o check-up each erased sector and avoid unexpected timeouts
2579 - board/altera/dk1c20/dk1s10.c:board_early_init_f():
2580 o enclose sevenseg_set() in cpp condition
2581 - remove the ASMI configuration for DK1S10_standard_32 (never present)
2582 - fix some typed in mistakes in the NIOS documentation
2583 2: - split DK1C20 configuration into several header files:
2584 o two new files for each NIOS CPU description
2585 o U-Boot related part is remaining in DK1C20.h
2586 3: - split DK1S10 configuration into several header files:
2587 o two new files for each NIOS CPU description
2588 o U-Boot related part is remaining in DK1S10.h
2589 4: - Add support for the Microtronix Linux Development Kit
2590 NIOS CPU configuration at the Altera Nios Development Kit,
2591 Stratix Edition (DK-1S10)
2592 5: - Add documentation for the Altera Nios Development Kit,
2593 Stratix Edition (DK-1S10)
2594 6: - Add support for the Nios Serial Peripharel Interface (SPI)
2595 (master only)
2596 7: - Add support for the common U-Boot SPI framework at
2597 RTC driver DS1306
2598
wdenkca262162004-02-09 20:51:26 +00002599* Patch by Rahul Shanbhag, 28 Jan 2004:
2600 Fix flash protection/locking handling for OMAP1610 innovator board.
2601
2602* Patch by Rolf Peukert, 28 Jan 2004:
2603 fix flash write problems on CSB226 board (write with 32 bit bus width)
2604
2605* Patches by Mark Jonas, 16 Jan 2004:
2606 - fix rounding error when calculating baudrates for MPC5200 PSCs
2607 - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
2608 time which is not supported
2609
wdenk2cefd152004-02-08 22:55:38 +00002610* Patch by Yuli Barcohen, 26 Jan 2004:
2611 Allow bzip2 compression for small memory footprint boards
2612
2613* Patch by Brad Kemp, 21 Jan 2004:
2614 Add support for CFI flash driver for both the Intel and the AMD
2615 command sets.
2616
2617* Patch by Travis Sawyer, 20 Jan 2004:
2618 Fix pci bridge auto enumeration of sibling p2p bridges.
2619
2620* Patch by Tolunay Orkun, 12 Jan 2004:
2621 Add some delays as needed for Intel LXT971A PHY support
2622
2623* Patches by Stephan Linz, 09 Jan 2004:
2624 - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
2625 - make DK1C20 board configuration related to ASMI conform to
2626 documentation
2627
wdenk927034e2004-02-08 19:38:38 +00002628* Patch by Anders Larsen, 09 Jan 2004:
2629
2630 ARM memory layout fixes: the abort-stack is now set up in the
2631 correct RAM area, and the BSS is zeroed out as it should be.
2632
2633 Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
2634 of the linker scripts are replaced by '__bss_start' and '_end',
2635 resp., which is a further step to eliminate unnecessary differences
2636 between the implementation of the CPU architectures.
2637
wdenk5401de42004-02-07 01:27:10 +00002638* Patch by liang a lei, 9 Jan 2004:
2639 Fix Intel 28F128J3 ID in include/flash.h
2640
2641* Patch by Masami Komiya, 09 Jan 2004:
2642 add support for TB0229 board (NEC VR4131 MIPS processor)
2643
2644* Patch by Leon Kukovec, 12 Dec 2003:
2645 changed extern __inline__ into static __inline__ in
2646 include/linux/byteorder/swab.h
2647
wdenk544e9732004-02-06 23:19:44 +00002648* Patch by Travis Sawyer, 30 Dec 2003:
2649 Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
2650 select MDI port based on enabled EMAC device.
2651 Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
2652 base PrPMC board.
2653
wdenk4b6e9052004-02-06 21:48:22 +00002654* Patch by Wolter Kamphuis, 15 Dec 2003:
2655 made CONFIG_SILENT_CONSOLE usable on all architectures
2656
2657* Disable date command on TQM866M - there is no RTC on MPC866
2658
wdenkfde37042004-01-31 20:06:54 +00002659* Fix variable CPU clock for MPC859/866 systems for low CPU clocks
2660
wdenk433feff2004-01-29 09:22:58 +00002661* Implement adaptive SDRAM timing configuration based on actual CPU
2662 clock frequency for INCA-IP; fix problem with board hanging when
2663 switching from 150MHz to 100MHz
2664
2665* Add PCMCIA CS support for BMS2003 board
2666
wdenkb50cde52004-01-24 20:25:54 +00002667* Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
2668 see doc/README.MPC866 for details;
2669 implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
2670 calculate CPU clock frequency from PLL register values.
2671
2672* Add support for 128 MB RAM on TQM8xxL/M modules
2673
wdenk398eeff2004-01-21 20:46:28 +00002674* Fix PS/2 keyboard problem caused by statically initialized variable
2675 pointing to a location in flash
2676
2677* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
2678
wdenkda55c6e2004-01-20 23:12:12 +00002679* The PS/2 mux on the BMS2003 board needs 450 ms after power on
2680 before we can access it; add delay in case we are faster (with no
2681 CF card inserted)
2682
2683* Cleanup of some init functions
2684
2685* Make sure SCC Ethernet is always stopped by the time we boot Linux
2686 to avoid Linux crashes by early packets coming in.
2687
2688* Accelerate flash accesses on LWMON board by using buffered writes
2689
wdenk2b80ae52004-01-18 18:21:54 +00002690* Fix typo in Makefile;
2691 fix problem with PARTNUM detection
2692
wdenkb983fa22004-01-16 00:30:56 +00002693* Patch by Reinhard Meyer, 09 Jan 2004:
2694 - add RTC support for MPC5200 based boards (requires RTC_XTAL)
2695
2696* Add support for IDE LED on BMS2003 board
2697 (exclusive with status LED!)
2698
2699* Add support for PS/2 keyboard (used with PS/2 multiplexor on
2700 BMS2003 board)
2701
2702* Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
2703 Add common files for "emk" boards
2704
wdenk87249ba2004-01-06 22:38:14 +00002705* Add a common get_ram_size() function and modify the the
2706 board-specific files to invoke that common implementation.
2707
2708======================================================================
wdenk7c699672004-01-06 11:13:56 +00002709Changes for U-Boot 1.0.1:
wdenk4b16c2e2003-11-07 13:42:26 +00002710======================================================================
2711
wdenk7c699672004-01-06 11:13:56 +00002712* Set default clock for INCA-IP to 150 MHz
2713
wdenk2f99a692004-01-04 22:51:12 +00002714* Make BMS2003 use a separate config file to avoid #ifdef mess;
2715 add I2C support; add support for DS1337 RTC
2716
2717* Add CompactFlash support for BMS2003 board
2718
2719* Add support for status LED on BMS2003 board
2720
wdenkad276f22004-01-04 16:28:35 +00002721* Patch by Scott McNutt, 02 Jan 2004:
2722 Add support for the Nios Active Serial Memory Interface (ASMI)
2723 on Cyclone devices
2724
2725* Patch by Andrea Marson, 16 Dec 2003:
2726 Add support for the PPChameleon ME and HI modules
2727
2728* Patch by Yuli Barcohen, 22 Dec 2003:
2729 Add support for Motorola DUET ADS board (MPC87x/88x)
2730
wdenkae65f502004-01-03 21:24:46 +00002731* Patch by Robert Schwebel, 15 Dec 2003:
2732 add support for cramfs (uses JFFS2 command interface)
2733
wdenk3be717f2004-01-03 19:43:48 +00002734* Patches by Stephan Linz, 11 Dec 2003:
2735 - more documentation for NIOS port
2736 - new struct nios_pio_t, struct nios_spi_t
2737 - Reconfiguration for NIOS Development Kit DK1C20:
2738 o move board related code from board/dk1c20
2739 to board/altera/dk1c20
2740 o create a new common source path board/altera/common
2741 and move generic flash access stuff into it
2742 o change/expand configuration file DK1C20.h
2743 - Add support for NIOS Development Kit DK1S10
2744 - Add status LED support for NIOS systems
2745 - Add dual 7-segment LED support for Altera NIOS DevKits
2746
wdenk5da7f2f2004-01-03 00:43:19 +00002747* Patch by Ronen Shitrit, 10 Dec 2003:
2748 Add support for the Marvell DB64360 / DB64460 development boards
2749
2750* Patch by Detlev Zundel, 10 Dec 2003:
2751 fix dependency problem in examples/Makefile
2752
wdenkbc01dd52004-01-02 16:05:07 +00002753* Patch by Denis Peter, 8 Dec 2003
2754 - add support for the PATI board (MPC555)
2755 - add SPI support for the MPC5xx
2756
2757* Patch by Anders Larsen, 08 Dec 2003:
2758 add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
2759 to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
2760 cleanup some redundand #defines
2761
wdenk0260cd62004-01-02 15:01:32 +00002762* Patch by André Schwarz, 8 Dec 2003:
2763 fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
2764 - TX and RX deskriptors must be quad-word aligned
2765 - does not work with only one TX deskriptor
2766 - standard reset method does not work
2767
2768* Patch by Masami Komiya, 08 Dec 2003:
2769 add RTL8139 ethernet driver
2770
2771* Patches by Ed Okerson, 07 Dec 2003:
2772 - fix ethernet for the AU1x00 processors in little-endian mode.
2773 - extend memsetup.S for the AU1x00 processors in BE and LE modes
2774
wdenk1ebf41e2004-01-02 14:00:00 +00002775* Minor code cleanup (coding style)
2776
2777* Patch by Reinhard Meyer, 30 Dec 2003:
2778 - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
2779 - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
2780 - turned debug print of PHY registers into a function (called in two places)
2781 - added support for EMK MPC5200 based modules
2782
2783* Fix MPC8xx PLPRCR_MFD_SHIFT typo
2784
2785* Add support for TQM866M modules
2786
2787* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
2788
2789* Fix a few compiler warnings
2790
wdenk78e3ab32003-12-28 11:44:59 +00002791* Patch by Reinhard Meyer, 28 Dec 2003:
2792 Add initial support for TOP5200 board
2793
wdenk67f13362003-12-27 19:24:54 +00002794* Make CPU clock on ICA-IP board controllable by a "cpuclk"
2795 environment variable which can set to "100", "133", or "150". The
2796 CPU clock will be configured accordingly upon next reboot. Other
2797 values are ignored. In case of an invalid or undefined "cpuclk"
2798 value, the compile-time default CPU clock speed will be used.
2799
2800* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
2801 window that is used to access the UART registers by the Linux driver)
2802
2803* Patch by Reinhard Meyer, 20 Dec 2003:
2804 Fix clock calculation for the MPC5200 for higher clock frequencies
2805 (above 2**32 / 10 = 429.5 MHz).
2806
2807* Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
2808
wdenk236d3fc2003-12-20 22:45:10 +00002809* Fix IceCube CLKIN configuration (it's 33.000000MHz)
2810
2811* Add new configuration for IceCube board with DDR memory
2812
2813* Update TRAB memory configurations
2814
wdenkdf28aa02003-12-12 00:02:26 +00002815* Add JFFS2 support for INCA-IP board
2816
stroese9c470352003-12-09 15:04:55 +00002817* Patch by Bill Hargen, 09 Dec 2003:
2818 - BUBINGA405EP: changed flash driver to protect top sector containing
2819 first instruction.
2820 - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
2821 - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
2822 - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
2823 - 405EP: added/fixed support for "reginfo" command.
2824 - 4xx: removed spurious MII error messages on "mii info" command.
2825
wdenkabf7a7c2003-12-08 01:34:36 +00002826* Patch by Bernhard Kuhn, 28 Nov 2003:
2827 add support for Coldfire CPU
2828 add support for Motorola M5272C3 and M5282EVB boards
2829
wdenk7f00b942003-12-07 23:55:12 +00002830* Patch by Pierre Aubert, 24 Nov 2003:
2831 - add a return value for the fpga command
2832 - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
2833 is defined. If ide_preinit fails, ide_init is aborted.
2834 - fix an endianess problem in fat.h
2835
wdenk174e0e52003-12-07 22:27:15 +00002836* Patch by Wolter Kamphuis, 05 Dec 2003:
2837 Add support for SNMC's QS850/QS823/QS860T boards
2838
wdenk444f22b2003-12-07 21:39:28 +00002839* Patch by Yuli Barcohen, 3 Dec 2003:
2840 "revive" U-Boot support for old Motorola MPC860ADS board
2841
2842* Patch by Cam(ilo?), 03 Dec 2003:
2843 make examples build even with broken Montavista objcopy
2844
2845* Patch by Pavel Bartusek, 27 Nov 2003:
2846 fix conversion problem with "bootretry" evironment variable
2847
wdenk4e7a58a2003-12-07 19:24:00 +00002848* Patch by Andre Schwarz, 24 Nov 2003:
2849 add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
2850
2851* Patch by Pavel Bartusek, 21 Nov 2003:
2852 set ZMII bridge speed on 440
2853
2854* Patch by Anders Larsen, 17 Nov 2003:
2855 Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
2856
wdenk4ea537d2003-12-07 18:32:37 +00002857* Patches by David Müller, 14 Nov 2003:
2858 - board/mpl/common/common_util.c
2859 * implement support for BZIP2 compressed images
2860 * various cleanups (printf -> puts, ...)
2861 - board/mpl/common/flash.c
2862 * report correct errors to upper layers
2863 * check the erase fail and VPP low bits in status reg
2864 - board/mpl/vcma9/cmd_vcma9.c
2865 - board/mpl/vcma9/flash.c
2866 * various cleanups (printf -> puts, ...)
2867 - common/cmd_usb.c
2868 * fix typo in comment
2869 - cpu/arm920t/usb_ohci.c
2870 * support for S3C2410 is missing in #if line
2871 - drivers/cs8900.c
2872 * reinit some registers in case of error (cable missing, ...)
2873 - fs/fat/fat.c
2874 * support for USB/MMC devices is missing in #if line
2875 - include/configs/MIP405.h
2876 - include/configs/PIP405.h
2877 * enable BZIP2 support
2878 * enlarge malloc space to 1MiB because of BZIP2 support
2879 - include/configs/VCMA9.h
2880 * enable BZIP2 support
2881 * enlarge malloc space to 1MiB because of BZIP2 support
2882 * enable USB support
2883 - lib_arm/armlinux.c
2884 * change calling convention of ARM Linux kernel as
2885 described on http://www.arm.linux.org.uk/developer/booting.php
2886
2887* Patch by Thomas Lange, 14 Nov 2003:
2888 Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
2889 support all these AMD boards.
2890
2891* Patch by Thomas Lange, 14 Nov 2003:
2892 Workaround for mips au1x00 physical memory accesses (the au1x00
2893 uses a 36 bit bus internally and cannot access physical memory
2894 directly. Use the uncached SDRAM address instead of the physical
2895 one.)
2896
wdenk5d5317e2003-12-07 00:46:27 +00002897* Patch by Xue Ligong (Joe), 13 Nov 2003:
2898 add Realtek 8019 ethernet driver
2899
2900* Patch by Yuli Barcohen, 13 Nov 2003:
2901 MPC826xADS/PQ2FADS cleanup
2902
2903* Patch by Anders Larsen, 12 Nov 2003:
2904 Update README to mark the PORTIO commands non-standard
2905
wdenk86765902003-12-06 23:55:10 +00002906* Patch by Nicolas Lacressonnière, 12 Nov 2003:
2907 update for for Atmel AT91RM9200DK development kit:
2908 - support for environment variables in DataFlash
2909 - Atmel DataFlash AT45DB1282 support
2910
2911* Patch by Jeff Carr, 11 Nov 2003:
2912 add support for new version of 8270 processors
2913
2914* Patches by George G. Davis, 05 Nov 2003:
2915 - only pass the ARM linux initrd tag to the kernel when an initrd
2916 is actually present
2917 - update omap1510inn configuration file
2918
wdenkf4cec3f2003-12-06 23:20:41 +00002919* Patches by Stephan Linz, 3 Nov 2003:
2920 - more endianess fixes for LAN91C111 driver
2921 - CFG_HZ configuration patch for NIOS Cyclone board
2922
2923* Patch by Stephan Linz, 28 Oct 2003:
2924 fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
2925
2926* Patch by Steven Scholz, 20 Oct 2003:
2927 - make "mii info <addr>" show infor for PHY at "addr" only
2928 - Endian fix for miiphy_info()
2929
wdenkc0aa5c52003-12-06 19:49:23 +00002930* Patch by Gleb Natapov, 19 Sep 2003:
2931 Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
2932
2933* Patch by Anders Larsen, 17 Sep 2003:
2934 Bring ARM memory layout in sync with the documentation:
2935 stack and malloc-heap are now located _below_ the U-Boot code
2936
wdenk768844e2003-12-06 11:20:01 +00002937* Accelerate booting on TRAB board: read and check autoupdate image
2938 headers first instead of always reading the whole images.
2939
wdenk1ae251b2003-12-05 21:08:38 +00002940* Fix type in MPC5XXX code (pointed out by Victor Wren)
2941
wdenk78ae91f2003-12-03 23:53:42 +00002942* Enabled password check on RMU board
2943
2944* Fix configuration problem with IceCube in LOWBOOT configuration:
2945 envrionment got embedded, corrupting the image layout.
2946
2947* Fix NEC display names (it's 6440 [for 640x480], not 6640).
2948
wdenkc0d54ae2003-11-25 16:55:19 +00002949* Added BMS2003 board
2950 add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
2951
wdenk9a1ff302003-11-17 21:45:27 +00002952* Fix flash driver for TRAB board (must use Unlock Bypass Reset
2953 command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
2954 and CPLD
2955
wdenkc6abb7e2003-11-17 21:14:37 +00002956* Use "-fPIC" instead of "-mrelocatable" to prevent problems with
2957 recent tools
2958
2959* Add checksum verification to 'imls' command
2960
2961* Add bd_info fields needed for 4xx Linux I2C driver
2962
2963* Patch by Martin Krause, 4 Nov. 2003:
2964 Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
2965
2966* Print used network interface when CONFIG_NET_MULTI is set
2967
wdenk4b16c2e2003-11-07 13:42:26 +00002968* Patch by Bernhard Kuhn, 28 Oct 2003:
2969 Add low boot support for MPC5200
2970
2971* Fix problem with dual PCMCIA support (NSCU)
2972
2973* Fix MPC5200 I2C initialization function
2974
2975======================================================================
wdenk934c4f82003-09-11 19:48:06 +00002976Changes for U-Boot 1.0.0:
2977======================================================================
2978
wdenk655a0f92003-10-30 21:49:38 +00002979* Fix parameter passing to standalone images with bootm command
2980
2981* Patch by Kyle Harris, 30 Oct 2003:
2982 Fix build errors for ixdp425 board
2983
2984* Patch by David M. Horn, 29 Oct 2003:
2985 Fixes to build under CYGWIN
2986
2987* Get IceCube MGT5100 working (again)
2988
wdenkb6c60cb32003-10-29 23:18:55 +00002989* Fix problems in memory test on some boards (which was not
2990 non-destructive as intended)
2991
2992* Patch by Gary Jennejohn, 28 Oct 2003:
2993 Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
2994 to prevent stack overflow on ARM systems
2995
wdenk55618472003-10-28 09:14:21 +00002996* Patch by Stephan Linz, 28 Oct 2003:
2997 fix init sequence error for NIOS port
2998
2999* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
3000
3001* Add CONFIG_VERSION_VARIABLE to TRAB configuration
3002
wdenka983cc22003-10-26 22:52:58 +00003003* Patch by Xiao Xianghua, 23 Oct 2003:
3004 small patch for mpc85xx
3005
3006* Fix small problem in MPC5200 I2C driver
3007
3008* Fix FCC3 support on ATC board
3009
dzu6605c842003-10-24 13:14:45 +00003010* Correct header printing for multi-image files in do_bootm()
3011
3012* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
3013
wdenk6fcda222003-10-22 09:00:28 +00003014* Fix PCI problems on PPChameleon board
3015
wdenk3da587e2003-10-19 23:22:11 +00003016* Patch by Steven Scholz, 18 Oct 2003:
3017 Fix AT91RM9200 ethernet driver
3018
3019* Patch by Nye Liu, 17 Oct 2003:
3020 Fix typo in include/mpc8xx.h
3021
3022* Patch by Richard Woodruff, 16 Oct 03:
3023 Fixes for cpu/arm925/interrupt.c
3024 - Initialize timestamp & lastdec vars.
3025 - fix timestamp overflows.
3026 - fix lastdec overflow.
3027 - smarter normalization to allow udelay() below 1ms to work.
3028
3029* Patch by Scott McNutt, 16 Oct
3030 add networking support for the Altera Nios Development Kit,
3031 Cyclone Edition (DK-1C20)
3032
3033* Patch by Jon Diekema, 14 Oct 2003:
3034 add hint about doc/README.silent to README file
3035
dzub02ed682003-10-19 21:43:26 +00003036* Add CompactFlash support for NSCU
3037
wdenkad7541e2003-10-19 22:30:08 +00003038* Fix PCI problems on PPChameleonEVB
3039
wdenk17d1a1d2003-10-16 12:53:35 +00003040* TRAB auto-update: Base decision if we have to strip the image
3041 header on image type as encoded in the header
wdenkad7541e2003-10-19 22:30:08 +00003042 (include image type patch by Martin Krause, 17 Oct 2003)
wdenk17d1a1d2003-10-16 12:53:35 +00003043
wdenk9c53f402003-10-15 23:53:47 +00003044* Patches by Xianghua Xiao, 15 Oct 2003:
3045
3046 - Added Motorola CPU 8540/8560 support (cpu/85xx)
3047 - Added Motorola MPC8540ADS board support (board/mpc8540ads)
3048 - Added Motorola MPC8560ADS board support (board/mpc8560ads)
3049
3050* Fix flash timings on TRAB board
3051
wdenkbd1575f2003-10-14 19:43:55 +00003052* Make sure HUSH is initialized for running auto-update scripts
3053
3054* Make 5200 reset command _really_ reset the board, without running
3055 any other code after it
3056
3057* Fix errors with flash erase when range spans across banks
3058 that are mapped in reverse order
3059
3060* Fix flash mapping and display on P3G4 board
3061
3062* Patch by Kyle Harris, 15 Jul 2003:
3063 - add support for Intel IXP425 CPU
3064 - add support for IXDP425 eval board
3065
wdenk808532a2003-10-10 10:05:42 +00003066* Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
3067 for more information
3068
wdenk9b7f3842003-10-09 20:09:04 +00003069* Patch by Steven Scholz, 10 Oct 2003
3070 - Add support for Altera FPGA ACEX1K
3071
wdenk9f837932003-10-09 19:00:25 +00003072* Patches by Thomas Lange, 09 Oct 2003:
3073 - fix cmd_ide.c for non ppc boards (read/write functions did not
3074 add ATA base address)
3075 - fix for shannon board
3076 - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
wdenk9b7f3842003-10-09 20:09:04 +00003077 - Endian swap ATA identity for all big endian CPUs, not just PPC
3078 - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
3079 args to linux
3080 - add support for dbau1x00 board (MIPS32)
wdenk9f837932003-10-09 19:00:25 +00003081
3082* Patch by Sangmoon Kim, 07 Oct 2003:
3083 add support for debris board
3084
wdenk61970fd2003-10-09 13:16:55 +00003085* Patch by Martin Krause, 09 Oct 2003:
3086 Fixes for TRAB board
3087 - /board/trab/rs485.c: correct baudrate
wdenk9c53f402003-10-15 23:53:47 +00003088 - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
wdenk61970fd2003-10-09 13:16:55 +00003089 udelay(); fix some timing problems with adc controller
3090 - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
3091 modify commands: touch and buzzer
3092
3093* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
3094 (quick & dirty workaround for rogue pointer problem in get_vfatname());
3095 Use direct function calls for auto_update instead of hush commands
3096
wdenk60164a82003-10-08 23:26:14 +00003097* Patch by Scott McNutt, 04 Oct 2003:
3098 - add support for Altera Nios-32 CPU
3099 - add support for Nios Cyclone Development Kit (DK-1C20)
3100
3101* Patch by Steven Scholz, 29 Sep 2003:
3102 - A second parameter for bootm overwrites the load address for
3103 "Standalone Application" images.
3104 - bootm sets environment variable "filesize" to the resulting
3105 (uncompressed) data length for "Standalone Application" images
3106 when autostart is set to "no". Now you can do something like
3107 if bootm $fpgadata $some_free_ram ; then
3108 fpga load 0 $some_free_ram $filesize
3109 fi
3110
3111* Patch by Denis Peter, 25 Sept 2003:
3112 add support for the MIP405 Rev. C board
3113
wdenk2f0812d2003-10-08 22:45:44 +00003114* Patch by Yuli Barcohen, 25 Sep 2003:
3115 add support for Zephyr Engineering ZPC.1900 board
3116
3117* Patch by Anders Larsen, 23 Sep 2003:
3118 add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
3119 implemented for the x86 architecture)
3120
wdenk49c3f672003-10-08 22:33:00 +00003121* Patch by Sangmoon Kim, 23 Sep 2003:
3122 fix pll_pci_to_mem_multiplier table for MPC8245
3123
3124* Patch by Anders Larsen, 22 Sep 2003:
3125 enable timed autoboot on PXA
3126
3127* Patch by David Müller, 22 Sep 2003:
wdenk49c3f672003-10-08 22:33:00 +00003128 - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
3129 returns correct libgcc file path
3130 - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
3131 time on s3c24x0 systems
3132
3133* Patch by Jon Diekema, 19 Sep 2003:
3134 - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
3135 link state to the fault LED.
3136 - In NetLoop, make the Fault LED reflect the link status. The link
3137 status gets updated on entry, and on timeouts.
wdenk9c53f402003-10-15 23:53:47 +00003138
wdenk1ee550e2003-10-08 22:14:02 +00003139* Patch by Anders Larsen, 18 Sep 2003:
3140 allow mkimage to build and run on Cygwin-hosted systems
3141
3142* Patch by Frank Müller, 18 Sep 2003:
3143 use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
3144 cpu/mpc8xx/fec.c
3145
3146* Patch by Pantelis Antoniou, 16 Sep 2003:
3147 add tool to compute fileds in the PLPRCR register for MPC86x
3148
wdenkec207f92003-10-07 20:01:55 +00003149* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
3150
wdenke97dcd02003-10-07 10:33:38 +00003151* Fix build problems under FreeBSD
3152
wdenk6cd4a5e2003-10-06 22:00:45 +00003153* Add generic filesystem image type
3154
wdenk7182b0f2003-10-06 21:55:32 +00003155* Make fatload set filesize environment variable
3156
3157* enable basic / medium / high-end configurations for PPChameleonEVB
3158 board; fix NAND code
3159
3160* enable TFTP client code to specify to the server the desired
3161 timeout value (see RFC-2349)
3162
dzu15b57c72003-09-30 15:22:12 +00003163* Improve SDRAM setup for TRAB board
3164
dzud5e45d82003-09-30 15:11:43 +00003165* Suppress all output with splashscreen configured only if "splashimage"
3166 is set
3167
dzuc9b08252003-09-30 14:36:51 +00003168* Fix problems with I2C support for mpc5200
3169
dzu8d7e4d12003-09-29 21:55:54 +00003170* Adapt TRAB configuration and auto_update to new memory layout
3171
dzu69438f62003-09-25 22:32:40 +00003172* Add configuration for wtk board
3173
dzufae2d812003-09-25 22:30:12 +00003174* Add support for the Sharp LQ065T9DR51U LCD display
3175
wdenk8706ea82003-09-18 10:02:25 +00003176* Patch by Rune Torgersen, 17 Sep 2003:
3177 - Fixes for MPC8266 default config
wdenk5256def2003-09-18 10:45:21 +00003178 - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
wdenk8706ea82003-09-18 10:02:25 +00003179
3180* Patches by Jon Diekema, 17 Sep 2003:
3181 - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
3182 env_common.c)
3183 - sbc8260 tweaks
3184 - adjust "help" output
3185
wdenk5958f4a2003-09-18 09:21:33 +00003186* Patches by Anders Larsen, 17 Sep 2003:
3187 - fix spelling errors
3188 - set GD_FLG_DEVINIT flag only after device function pointers
3189 are valid
3190 - Allow CFG_ALT_MEMTEST on systems where address zero isn't
3191 writeable
3192 - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
3193 - trigger watchdog while waiting in serial driver
3194
wdenkb6b2f0e2003-09-17 22:48:07 +00003195* Add auto-update code for TRAB board using USB memory sticks,
3196 support new configuration with more memory
wdenkf6a6ac12003-09-17 15:10:32 +00003197
wdenk7f202b92003-09-16 17:35:37 +00003198* disable MPC5200 bus pipelining as workaround for bus contention
3199
wdenkf5547d32003-09-16 17:06:05 +00003200* Modify XLB arbiter priorities on MPC5200 so all devices use same
3201 priority; configure critical interrupts to be handled like external
3202 interrupts
3203
wdenk6e2bf7a2003-09-16 11:39:10 +00003204* Make IPB clock on MGT5100/MPC5200 configurable in board config file;
3205 go back to 66 MHz for stability
3206
wdenk1f197c62003-09-15 18:00:00 +00003207* Patches by Jon Diekema, 15 Sep 2003:
3208 - add description for missing CFG_CMD_* entries in the README file
3209 - sacsng tweaks
3210
wdenkfc314ce2003-09-14 19:08:39 +00003211* Patch by Gleb Natapov, 14 Sep 2003:
3212 enable watchdog support for all MPC824x boards that have a watchdog
3213
3214* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
3215 "Non-octet Aligned Frame" errors we see at 100 Mbps
3216
3217* Patch by Sharad Gupta, 14 Sep 2003:
3218 fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
3219
wdenkbd08bc42003-09-13 19:13:29 +00003220* Patch by llandre, 11 Sep 2003:
3221 update configuration for PPChameleonEVB board
3222
wdenk25521902003-09-13 19:01:12 +00003223* Patch by David Müller, 13 Sep 2003:
3224 various changes to VCMA9 board specific files
3225
3226* Add I2C support for MGT5100 / MPC5200
3227
wdenkf28560f2003-09-12 20:09:09 +00003228* Patch by Rune Torgersen, 11 Sep 2003:
3229 Changed default memory option on MPC8266ADS to NOT be Page Based
3230 Interleave, since this doesn't work very well with the standard
3231 16MB DIMM
3232
3233* Patch by George G. Davis, 12 Sep 2003:
3234 fix Makefile settings for sk98 driver
3235
stroese84da3532003-09-12 08:57:52 +00003236* Patch by Stefan Roese, 12 Sep 2003:
3237 - new boards added: DP405, HUB405, PLU405, VOH405
3238 - some esd boards updated
3239 - cpu/ppc4xx/sdram.c: disable memory controller before setting
3240 first values
3241 - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
3242
wdenk4cc02a82003-09-11 23:06:34 +00003243* Patch by Martin Krause, 11 Sep 2003:
3244 add burn-in tests for TRAB board
3245
3246* Enable instruction cache on MPC5200 board
3247
wdenk934c4f82003-09-11 19:48:06 +00003248* Patch by Denis Peter, 11 Sep 2003:
3249 - fix USB data pointer assignment for bulk only transfer.
3250 - prevent to display erased directories in FAT filesystem.
3251
3252* Change output format for NAND flash - make it look like for other
3253 memory, too
3254
3255======================================================================
wdenkde887eb2003-09-10 18:20:28 +00003256Changes for U-Boot 0.4.8:
wdenk2bb11052003-07-17 23:16:40 +00003257======================================================================
3258
dzufae2d812003-09-25 22:30:12 +00003259* Add I2C and RTC support for RMU board
3260
wdenk2c9b05d2003-09-10 22:30:53 +00003261* Patches by Denis Peter, 9 Sep 2003:
3262 add FAT support for IDE, SCSI and USB
3263
3264* Patches by Gleb Natapov, 2 Sep 2003:
3265 - cleanup of POST code for unsupported architectures
3266 - MPC824x locks way0 of data cache for use as initial RAM;
3267 this patch unlocks it after relocation to RAM and invalidates
3268 the locked entries.
3269
3270* Patch by Gleb Natapov, 30 Aug 2003:
3271 new I2C driver for mpc107 bridge. Now works from flash.
3272
3273* Patch by Dave Ellis, 11 Aug 2003:
3274 - JFFS2: fix typo in common/cmd_jffs2.c
3275 - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
3276 - JFFS2: remove node version 0 warning
3277 - JFFS2: accept JFFS2 PADDING nodes
3278 - SXNI855T: add AM29LV800 support
3279 - SXNI855T: move environment from EEPROM to flash
3280 - SXNI855T: boot from JFFS2 in NOR or NAND flash
3281
3282* Patch by Bill Hargen, 11 Aug 2003:
3283 fixes for I2C on MPC8240
3284 - fix i2c_write routine
3285 - fix iprobe command
3286 - eliminates use of global variables, plus dead code, cleanup.
3287
wdenkde887eb2003-09-10 18:20:28 +00003288* Add support for USB Mass Storage Devices (BBB)
3289 (tested with USB memory sticks only)
3290
3291* Avoid flicker on TRAB's VFD
3292
wdenkeb20ad32003-09-05 23:19:14 +00003293* Add support for SK98xx driver
3294
3295* Add PCI support for SL8245 board
3296
3297* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
3298 or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
3299 Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
3300
3301* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
3302 to allow for more accurate baudrate settings
3303 (error now 0.7% at 115 kbps, instead of 3.5% before)
3304
3305* Patch by Andreas Mohr, 4 Sep 2003:
3306 Fix a lot of spelling errors
3307
wdenk232fe0b2003-09-02 22:48:03 +00003308* Add support for PPChameleon Eval Board
3309
3310* Add support for P3G4 board
3311
3312* Fix problem with MGT5100 FEC driver: add "early" MAC address
3313 initialization
3314
wdenk9a8965d2003-08-31 18:37:54 +00003315* Patch by Yuli Barcohen, 7 Aug 2003:
3316 check BCSR to detect if the board is configured in PCI mode
3317
wdenkde887eb2003-09-10 18:20:28 +00003318======================================================================
3319Changes for U-Boot 0.4.7:
3320======================================================================
3321
wdenk84650f52003-08-30 00:05:50 +00003322* Patch by Raghu Krishnaprasad, 7 Aug 2003:
3323 add support for Adder II MPC852T module
3324
wdenk7eaacc52003-08-29 22:00:43 +00003325* Patch by George G. Davis, 19 Aug 2003:
3326 fix TI Innovator/OMAP1510 pin configs
3327
3328* Patches by Kshitij, 18 Aug 2003
3329 - add support for arm926ejs cpu core
3330 - add support for TI OMAP 1610 Innovator Board
3331
wdenk710e3502003-08-29 20:57:53 +00003332* Patch by Yuli Barcohen, 14 Aug 2003:
3333 add support for bzip2 uncompression
3334
3335* Add GCC library to examples/Makefile so GCC utility functions will
3336 be resolved, too
3337
wdenk2191f502003-08-29 10:05:53 +00003338* Add I2C and RTC support for RMU board using software I2C driver
3339 (because of better response to iprobe command); fix problem with
3340 "reset" command
3341
stroese20a26922003-08-28 14:24:37 +00003342* Patch by Matthias Fuchs, 28 Aug 2003:
3343 Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
3344 CONFIG_BOOTP_MAKS (see README).
3345
wdenkb10ba6b2003-08-28 09:41:22 +00003346* Fix ICU862 environment problem
3347
3348* Fix RAM size detection for RMU board
3349
3350* Implement "reset" for MGT5100/MPC5200 systems
3351
3352======================================================================
3353Changes for U-Boot 0.4.6:
3354======================================================================
3355
wdenk5d841732003-08-17 18:55:18 +00003356* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
3357 allow selection of clock frequency as "make" target
3358
3359* Implement memory autosizing code for IceCube boards
3360
3361* Configure network port on INCA-IP for autonegotiation
3362
3363* Fix overflow problem in network timeout code
3364
3365* Patch by Richard Woodruff, 8 Aug 2003:
3366 Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
3367
wdenkb10ba6b2003-08-28 09:41:22 +00003368======================================================================
3369Changes for U-Boot 0.4.5:
3370======================================================================
3371
wdenkfb229ae2003-08-07 22:18:11 +00003372* Update for TQM board defaults:
3373 disable clocks_in_mhz, enable boot count limit
3374
dzuf6565c62003-08-07 15:04:48 +00003375* Removed tools/gdb from "make all" target. Added make target "gdbtools"
3376 in toplevel directory instead. Removed astest.c from tools/gdb because
3377 it is no longer relevant.
3378
wdenk02379022003-08-05 18:22:44 +00003379* Fix PCI support for MPC5200 / IceCube Board
3380
wdenk0a658552003-08-05 17:43:17 +00003381* Map ISP1362 USB OTG controller for NSCU board
3382
3383* Patch by Brad Parker, 02 Aug 2003:
3384 fix sc520_cdp problems
3385
3386* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
3387
3388* Allow erase command to cross flash bank boundaries
3389
wdenke58b0dc2003-07-27 00:21:01 +00003390* Patch by Scott McNutt, 21 Jul 2003:
3391 Add support for LynuxWorks Kernel Downloadable Images (KDIs).
3392 Both LynxOS and BlueCat linux KDIs are supported.
3393
3394* Patch by Richard Woodruff, 25 Jul 2003:
3395 use more reliable reset for OMAP/925T
3396
3397* Patch by Nye Liu, 25 Jul 2003:
3398 fix typo in mpc8xx.h
3399
3400* Patch by Richard Woodruff, 24 Jul 2003:
3401 Fixes for cmd_nand.c:
3402 - Fixed null dereferece which could result in incorrect ECC values.
3403 - Added support for devices with no Ready/Busy signal hooked up.
3404 - Added OMAP1510 read/write protect handling.
3405 - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
3406 for non-JFFS2.
3407 - Switched default ECC to be JFFS2.
3408
wdenkb8463562003-07-26 08:08:08 +00003409* Allow crc32 to be used at address 0x000
3410
3411* Provide consistent interface to standalone applications to access
3412 the 'global_data' structure
3413 Provide a doc/README.standalone more useful to users/developers.
3414
3415* Make IceCube MGT5100 FEC driver work
3416
wdenk874ac262003-07-24 23:38:38 +00003417* Implement new mechanism to export U-Boot's functions to standalone
3418 applications: instead of using (PPC-specific) system calls we now
3419 use a jump table; please see doc/README.standalone for details
3420
3421* Patch by Dave Westwood, 24 Jul 2003:
3422 added support for Unity OS (a proprietary OS)
3423
3424* Patch by Detlev Zundel, 23 Jul 2003:
3425 add "imls" command to print flash table of contents
3426
3427* Fix cold boot detection for log buffer reset
3428
3429* Return error for invalid length specifiers with "cp.X" etc.
3430
3431* Fix startup problem on MIPS
3432
3433* Allow for CONFIG_SPLASH_SCREEN even when no explicit
3434 bitmap support is configured
3435
3436* Patch by Bill Hargen, 18 Jul 2003:
3437 - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
3438
3439* Patch by Denis Peter, 18 Jul 2003:
3440 - fix memory configuration for MIP405T
3441 - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
3442
3443* Cleanup of TQM82xx configurations; use "official" board types
3444 to make selection easier.
3445
wdenk2bb11052003-07-17 23:16:40 +00003446* Patch by Martin Krause, 17 Jul 2003:
3447 add delay to get I2C working with "imm" command and s3c24x0_i2c.c
3448
3449* Patch by Richard Woodruff, 17 July 03:
stroese20a26922003-08-28 14:24:37 +00003450 - Fixed bug in OMAP1510 baud rate divisor settings.
wdenk2bb11052003-07-17 23:16:40 +00003451
3452* Patch by Nye Liu, 16 July 2003:
3453 MPC860FADS fixes:
3454 - add MPC86xADS support (uses MPC86xADS.h)
3455 - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
3456 o PLPRCR changes
3457 o BRG changes (EXTAL/XTAL restricted to 10MHz)
3458 o don't trust gclk() software measurement by default, depend on
3459 CONFIG_8xx_GCLK_FREQ
3460 - add DRAM SIMM not installed detection
3461 - use more "correct" SDRAM initialization sequence
3462 - allow different SDRAM sizes (8xxADS has 8M)
3463 - default DER is 0
3464 - remove unused MAMR defines from FADS860T.h (all done in fads.c)
3465 - rename MAMR/MBMR defines to be more consistent. Should eventually
3466 be merged into MxMR to better reflect the PowerQUICC datasheet.
3467
3468* Patch by Yuli Barcohen, 16 Jul 2003:
3469 support new Motorola PQ2FADS-ZU evaluation board which replaced
3470 MPC8260ADS and MPC8266ADS
3471
3472======================================================================
wdenk21136db2003-07-16 21:53:01 +00003473Changes for U-Boot 0.4.4:
3474======================================================================
3475
3476* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
3477
3478* Add support for MGT5100 and MPC5200 processors
3479
3480* Patch by Lutz Dennig, 15 Jul 2003:
3481 update for R360MPI board
3482
3483======================================================================
wdenkdccbda02003-07-14 22:13:32 +00003484Changes for U-Boot 0.4.3:
wdenkb9bbd242003-06-30 16:24:52 +00003485======================================================================
3486
wdenkf6f96f72003-07-15 20:04:06 +00003487* Patches by Kshitij, 04 Jul 2003
wdenk21136db2003-07-16 21:53:01 +00003488 - added support for arm925t cpu core
wdenkf6f96f72003-07-15 20:04:06 +00003489 - added support for TI OMAP 1510 Innovator Board
3490
wdenkca9bc762003-07-15 07:45:49 +00003491* Patches by Martin Krause, 14 Jul 2003:
3492 - add I2C support for s3c2400 systems (trab board)
3493 - (re-) add "ping" to command table
3494
3495* Fix handling of "slow" POST routines
3496
wdenkdccbda02003-07-14 22:13:32 +00003497* Patches by Yuli Barcohen, 13 Jul 2003:
3498 - Correct flash and JFFS2 support for MPC8260ADS
3499 - fix PVR values and clock generation for PowerQUICC II family
3500 (8270/8275/8280)
3501
3502* Patch by Bernhard Kuhn, 08 Jul 2003:
3503 - add support for M68K targets
3504
3505* Patch by Ken Chou, 3 Jul:
3506 - Fix PCI config table for A3000
3507 - Fix iobase for natsemi.c
3508 (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
wdenk21136db2003-07-16 21:53:01 +00003509
wdenkdccbda02003-07-14 22:13:32 +00003510* Allow to enable "slow" POST routines by key press on power-on
3511* Fix temperature dependend switching of LCD backlight on LWMON
3512* Tweak output format for LWMON
3513
stroesebe848492003-07-11 08:23:12 +00003514* Patch by Stefan Roese, 11 Jul 2003:
3515 - Fix bug in CONFIG_VERSION_VARIABLE.
3516 - AR405 config updated.
3517 - OCRTC/ORSG: bsp command added.
3518 - ASH405 bsp update.
3519
wdenkdccbda02003-07-14 22:13:32 +00003520======================================================================
3521Changes for U-Boot 0.4.2:
3522======================================================================
3523
wdenk69141282003-07-07 20:07:54 +00003524* Add support for NSCU board
3525
3526* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
3527
3528* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
3529 mirror bit flash on TQM8xxM modules
3530
wdenkf287a242003-07-01 21:06:45 +00003531* Patch by Kenneth Johansson, 30 Jun 2003:
3532 get rid of MK_CMD_ENTRY macro; update doc/README.command
3533
wdenkb9bbd242003-06-30 16:24:52 +00003534* Patch by Seb James, 30 Jun 2003:
3535 Improve documentation of I2C configuration in README
3536
3537* Fix problems with previous log buffer "fixes"
3538
3539* Fix minor help text issues
3540
3541* "log append" did not append a newline
3542
3543======================================================================
wdenkf12e3962003-06-29 21:03:46 +00003544Changes for U-Boot 0.4.1:
wdenkc08f1582003-04-27 22:52:51 +00003545======================================================================
3546
wdenkf12e3962003-06-29 21:03:46 +00003547* Fix some missing commands, cleanup header files
3548 (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
3549
wdenk3086a972003-06-28 23:11:04 +00003550* Rewrite command lookup and help command (fix problems with bubble
3551 sort when sorting command name list). Minor cleanup here and there.
3552
wdenkd9fce812003-06-28 17:24:46 +00003553* Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
3554 - Allow to call sysmon function interactively
3555 - PIC on LWMON board needs delay after power-on
3556 - Add missing RSR definitions for MPC8xx
3557 - Improve log buffer handling: guarantee clean reset after power-on
wdenkde887eb2003-09-10 18:20:28 +00003558 - Add support for EXBITGEN board (aka "genie")
wdenkd9fce812003-06-28 17:24:46 +00003559 - Add support for SL8245 board
3560
wdenk57b2d802003-06-27 21:31:46 +00003561* Code cleanup:
3562 - remove trailing white space, trailing empty lines, C++ comments, etc.
3563 - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
3564
3565* Patches by Kenneth Johansson, 25 Jun 2003:
3566 - major rework of command structure
3567 (work done mostly by Michal Cendrowski and Joakim Kristiansen)
3568
3569======================================================================
3570Changes for U-Boot 0.4.0:
3571======================================================================
3572
wdenk70764a32003-06-26 22:04:09 +00003573* Patches by Robert Schwebel, 26 Jun 2003:
wdenk57b2d802003-06-27 21:31:46 +00003574 - csb226 configuration updated
3575 - credits for logodl port updated
3576 - innokom configuration updated
3577 - logodl tree update, still with coding style inconsistencies
3578 - added OCM for ppc405 warning to README
wdenk70764a32003-06-26 22:04:09 +00003579
3580* Patch by Pantelis Antoniou, 25 Jun 2003:
3581 update NetVia with V2 board support
3582
wdenkbb2d9272003-06-25 22:26:29 +00003583* Header file cleanup for ARM
3584
3585* Patch by Murray Jensen, 24 Jun 2003:
3586 - make sure to use only U-boot provided header files
3587 - fix problems with ".rodata.str1.4" section as used by GCC-3.x
3588
stroeseab2751b2003-06-24 14:32:24 +00003589* Patch by Stefan Roese, 24 Jun 2003:
3590 - Update esd ASH405 board files.
3591 - Update esd DASA_SIM config file.
3592 - Add ping command to some esd boards.
3593
wdenk88d2ba92003-06-23 18:12:28 +00003594* Patch by Yuli Barcohen, 23 Jun 2003:
3595 Update for MPC8260ADS board
3596
3597* Patch by Murray Jensen, 23 Jun 2003:
3598 - cleanup of GCC 3.x compiler warnings
3599
wdenk56958612003-06-22 17:18:28 +00003600* Patch by Rune Torgersen, 4 Jun 2003:
3601 add large memory support for MPC8266ADS board
stroeseab2751b2003-06-24 14:32:24 +00003602
wdenk56958612003-06-22 17:18:28 +00003603* Patch by Richard Woodruff, 19 June 03:
3604 - Enabled standard u-boot device abstraction for ARM
3605 - Enabled console device for ARM
3606 - Initilized bi_baudrate for ARM
3607
3608* Patch by Bill Hargen, 23 Apr 2003:
3609 fix byte order for 824x I2C addresses (write op)
3610
wdenkdbae5042003-06-21 00:17:24 +00003611* Patch by Murray Jensen, 20 Jun 2003:
3612 - hymod update
3613 - cleanup (especially for gcc-3.x compilers)
3614
wdenkaaf48a92003-06-20 23:10:58 +00003615* Patch by Tom Guilliams, 20 Jun 2003:
3616 added CONFIG_750FX support for IBM 750FX processors
3617
wdenk8aeb24e2003-06-20 22:36:30 +00003618* Patch by Devin Crumb, 02 Apr 2003:
3619 Fix clock divider rounding problem in drivers/serial.c
3620
3621* Patch by Richard Woodruff, 19 June 03:
3622 - Fixed smc91c111 driver to sync with the u-boot environment
3623 (driver/smc91c111.c).
wdenk3e8b7dc2003-06-19 23:58:30 +00003624 - Added eth_init error return check in NetLoop (net/net.c).
3625
wdenk8aeb24e2003-06-20 22:36:30 +00003626* Patch by Ken Chou, 19 June 2003:
wdenk3e8b7dc2003-06-19 23:58:30 +00003627 Added support for A3000 SBC board (Artis Microsystems Inc.)
3628
wdenkb00ec162003-06-19 23:40:20 +00003629* Patches by Murray Jensen, 17 Jun 2003:
3630 - Hymod board database mods: add "who" field and new xilinx chip types
3631 - provide new "init_cmd_timeout()" function so code external to
3632 "common/main.c" can use the "reset_cmd_timeout()" function before
3633 entering the main loop
3634 - add DTT support for adm1021 (new file dtt/adm1021.c; config
3635 slightly different. see include/configs/hymod.h for an example
3636 (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
3637 CFG_DTT_ADM1021 defined)
3638 - add new "eeprom_probe()" function which has similar args and
3639 behaves in a similar way to "eeprom_read()" etc.
3640 - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
3641 function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
3642 - gdbtools copyright update
3643 - ensure that set_msr() executes the "sync" and "isync" instructions
3644 after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
3645 - 8260 I/O ports fix: Open Drain should be set last when configuring
3646 - add SIU IRQ defines for 8260
3647 - allow LDSCRIPT override and OBJCFLAGS initialization: change to
3648 config.mk to allow board configurations to override the GNU
3649 linker script, selected via the LDSCRIPT, make variable, and to
3650 give an initial value to the OBJCFLAGS make variable
3651 - 8260 i2c enhancement:
3652 o correctly extends the timeout depending on the size of all
3653 queued messages for both transmit and receive
3654 o will not continue with receive if transmit times out
3655 o ensures that the error callback is done for all queued tx
3656 and rx messages
3657 o correctly detects both tx and rx timeouts, only delivers one to
3658 the callback, and does not overwrite an earlier error
3659 o logic in i2c_probe now correct
3660 - add "vprintf()" function so that "panic()" function can be
3661 technically correct
3662 - many Hymod board changes
3663
wdenk88e72a32003-06-19 23:04:19 +00003664* Patches by Robert Schwebel, 14 Jun 2003:
3665 - add support for Logotronic DL datalogger board
3666 - cleanup serial line after kermit binary download
3667 - add debugX macro (debug level support)
3668 - update mach-types.h to latest arm.linux.org.uk master list.
3669
wdenk7539dea2003-06-19 23:01:32 +00003670* Patches by David Müller, 12 Jun 2003:
3671 - rewrite of the S3C24X0 register definitions stuff
3672 - "driver" for the built-in S3C24X0 RTC
3673
3674* Patches by Yuli Barcohen, 12 Jun 2003:
3675 - Add MII support and Ethernet PHY initialization for MPC8260ADS board
3676 - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
3677 configuration word supplied by FPGA on some MPC8260ADS boards
3678
3679* Patch by Pantelis Antoniou, 10 Jun 2003:
3680 Unify status LED interface
3681
wdenkd155afb2003-06-18 20:22:24 +00003682* Add support for DS12887 RTC; add RTC support for ATC board
3683
wdenk381669a2003-06-16 23:50:08 +00003684* Patch by Nicolas Lacressonniere, 11 Jun 2003:
3685 Modifications for Atmel AT91RM9200DK ARM920T based development kit
3686 - Add Atmel DataFlash support for reading and writing.
stroeseab2751b2003-06-24 14:32:24 +00003687 - Add possibility to boot a Linux from DataFlash with BOOTM command.
wdenk381669a2003-06-16 23:50:08 +00003688 - Add Flash detection on Atmel AT91RM9200DK
3689 (between Atmel AT49BV1614 and AT49BV1614A flashes)
3690 - Replace old Ethernet PHY layer functions
3691 - Change link address
3692
3693* Patch by Frank Smith, 9 Jun 2003:
3694 use CRIT_EXCEPTION for machine check on 4xx
3695
3696* Patch by Detlev Zundel, 13 Jun 2003:
3697 added implementation of the "carinfo" command in cmd_immap.c
3698
wdenk7a428cc2003-06-15 22:40:42 +00003699* Fix CONFIG_NET_MULTI support in include/net.h
3700
3701* Patches by Kyle Harris, 13 Mar 2003:
3702 - Add FAT partition support
3703 - Add command support for FAT
3704 - Add command support for MMC
3705 ----
3706 - Add Intel PXA support for video
3707 - Add Intel PXA support for MMC
3708 ----
3709 - Enable MMC and FAT for lubbock board
3710 - Other misc changes for lubbock board
3711
wdenkb2abefb2003-06-06 11:20:01 +00003712* Patch by Robert Schwebel, April 02, 2003:
3713 fix for SMSC91111 driver
3714
wdenk77934442003-06-05 19:37:36 +00003715* Patch by Vladimir Gurevich, 04 Jun 2003:
3716 make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
3717
stroese98636162003-06-05 15:44:37 +00003718* Patch by Stefan Roese, 05 Jun 2003:
3719 - PPC4xx: Fix bug for initial stack in data cache as pointed out by
3720 Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
3721 data cache can be used even if the chip select is in use.
3722 - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
3723 (see README for further description).
3724 - Changed config files of CONFIG_EEPRO100 boards to use the
3725 CFG_RX_ETH_BUFFER define.
3726
wdenke6466f62003-06-05 19:27:42 +00003727* Add support for RMU board
3728
3729* Add support for TQM862L at 100/50 MHz
3730
3731* Patch by Pantelis Antoniou, 02 Jun 2003:
3732 major reconstruction of networking code;
3733 add "ping" support (outgoing only!)
3734
wdenke39c2842003-06-04 15:05:30 +00003735* Patch by Denis Peter, 04 June 2003:
3736 add support for the MIP405T board
3737
wdenk4e112c12003-06-03 23:54:09 +00003738* Patches by Udi Finkelstein, 2 June 2003:
3739 - Added support for custom keyboards, initialized by defining a
3740 board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
3741 - Added support for the RBC823 board.
3742 - cpu/mpc8xx/lcd.c now automatically calculates the
3743 Horizontal Pixel Count field.
3744
3745* Fix alignment problem in BOOTP (dhcp_leasetime option)
3746 [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
3747
3748* Patch by Mark Rakes, 14 May 2003:
3749 add support for Intel e1000 gig cards.
3750
3751* Patch by Nye Liu, 3 Jun 2003:
3752 fix critical typo in MAMR definition (include/mpc8xx.h)
3753
3754* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
3755
3756* Patch by Klaus Heydeck, 2 Jun 2003
3757 Minor changes for KUP4K configuration
3758
wdenkabda5ca2003-05-31 18:35:21 +00003759* Patch by Marc Singer, 29 May 2003:
3760 Fixed rarp boot method for IA32 and other little-endian CPUs.
3761
3762* Patch by Marc Singer, 28 May 2003:
3763 Added port I/O commands.
3764
3765* Patch by Matthew McClintock, 28 May 2003
3766 - cpu/mpc824x/start.S: fix relocation code when booting from RAM
3767 - minor patches for utx8245
3768
3769* Patch by Daniel Engström, 28 May 2003:
3770 x86 update
3771
3772* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
3773 add nand flash support to SXNI855T configuration
3774 fix/extend nand flash support:
3775 - fix 'nand erase' command so does not erase bad blocks
3776 - fix 'nand write' command so does not write to bad blocks
3777 - fix nand_probe() so handles no flash detected properly
3778 - add doc/README.nand
3779 - add .jffs2 and .oob options to nand read/write
3780 - add 'nand bad' command to list bad blocks
3781 - add 'clean' option to 'nand erase' to write JFFS2 clean markers
3782 - make NAND read/write faster
3783
3784* Patch by Rune Torgersen, 23 May 2003:
3785 Update for MPC8266ADS board
3786
wdenkb9a83a92003-05-30 12:48:29 +00003787* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
3788 instead CFG_MONITOR_LEN is now only used to determine _at_compile_
3789 _time_ (!) if the environment is embedded within the U-Boot image,
3790 or in a separate flash sector.
3791
3792* Cleanup CFG_DER #defines in config files (wd maintained only)
3793
wdenkf4688a22003-05-28 08:06:31 +00003794* Fix data abort exception handling for arm920t CPU
3795
3796* Fix alignment problems with flash driver for TRAB board
3797
3798* Patch by Donald White, 21 May 2003:
3799 fix calculation of base address in pci_hose_config_device()
3800
3801* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
3802 execute "cmd2", even if "cmd1" fails. Note that this is different
3803 to "run var1 var2" where the contents of "var2" will NOT be
3804 executed when a command in "var1" fails.
3805
wdenk6f770ed2003-05-23 23:18:21 +00003806* Add zero-copy ramdisk support (requires corresponding kernel support!)
3807
wdenk0463e042003-05-23 12:36:20 +00003808* Patch by Kyle Harris, 20 May 2003:
3809 In preparation for an ixp port, rename cpu/xscale and arch-xscale
3810 into cpu/pxa and arch-pxa.
3811
stroeseab38cf32003-05-23 11:49:24 +00003812* Patch by Stefan Roese, 23 May 2003:
3813 - IBM PPC405EP port added.
3814 - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
3815 UART0) is used as default U-Boot console. PPC4xx only!
3816 - esd ASH405 board added (PPC405EP based).
3817 - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
3818 - esd CPCI405AB board added.
3819 - esd PMC405 board added.
3820 - Update of some esd boards.
3821
wdenk7d076412003-05-23 11:38:58 +00003822* Patch by Denis Peter, 19 Mai 2003:
3823 add support for the MIP405-3 board
3824
wdenkbf2f8c92003-05-22 22:52:13 +00003825* Patch by Dave Ellis, 22 May 2003:
3826 Fix problem with only partially cleared .bss segment
3827
3828* Patch by Rune Torgersen, 12 May 2003:
3829 get PCI to work on a MPC8266ADS board; incorporate change to
3830 cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
3831
3832* Patch by Nye Liu, 1 May 2003:
3833 minor patches for the FADS8xx
3834
3835* Patch by Thomas Schäfer, 28 Apr 2003:
3836 Fix SPD handling for 256 ECC DIMM on Walnut
3837
wdenk6bd7b5d2003-05-21 20:26:20 +00003838* Add support for arbitrary bitmaps for TRAB's VFD command;
3839 allow to pass boot bitmap addresses in environment variables;
3840 allow for zero boot delay
wdenk26991552003-05-20 20:49:01 +00003841
3842* Patch by Christian Geißinger, 19 May 2002:
3843 On TRAB: wait until the dummy byte has been completely sent
3844
wdenk0893c472003-05-20 14:25:27 +00003845* Patch by David Updegraff, 22 Apr 2003:
3846 update for CrayL1 board
3847
3848* Patch by Pantelis Antoniou, 21 Apr 2003:
3849 add boot support for ARTOS (a proprietary OS)
3850
3851* Patch by Steven Scholz, 11 Apr 2003:
3852 Add support for RTC DS1338
3853
3854* Patch by Rod Boyce, 24 Jan 2003:
3855 Fix counting of extended partitions in diskboot command
3856
wdenkc394e392003-05-20 10:58:04 +00003857* Patch by Christophe Lindheimer, 20 May 2003:
3858 allow the use of CFG_LOADS when CFG_NO_FLASH is set
3859
wdenk6099e872003-05-20 10:39:44 +00003860* Fix SDRAM timing on Purple board
3861
wdenke5d61c72003-05-18 11:30:09 +00003862* Add support for CompactFlash on ATC board
3863 (includes support for Intel 82365 and compatible PC Card controllers,
3864 and Yenta-compatible PCI-to-CardBus controllers)
3865
wdenkaa603362003-05-12 21:50:16 +00003866* Patch by Mathijs Haarman, 08 May 2003:
3867 Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
3868
wdenke2e3f632003-05-03 23:33:47 +00003869* Fix problem with usage of "true" (undefined in current versions of bfd.h)
3870
wdenk541a76d2003-05-03 15:50:43 +00003871* Add support for Promess ATC board
3872
3873* Patch by Keith Outwater, 28 Apr 2003:
3874 - Miscellaneous corrections and additions to GEN860T board specific code.
3875 - Added GEN860_SC variant to GEN860T.
3876 - Miscellaneous corrections to GEN860T documentation.
3877 - Correct duplicate entry in U-Boot CREDITS file.
3878 - Add GEN860T_SC entry in MAINTAINERS file.
3879 - Update CREDITS file with GEN860T_SC info.
3880
3881* Update Smiths Aerospace addresses in MAINTAINERS file
3882
3883* Fix error handling in hush's version of "run" command
3884
wdenkc08f1582003-04-27 22:52:51 +00003885* LWMON extensions:
3886 - Splashscreen support
3887 - modem support
3888 - sysmon support
3889 - temperature dependend enabling of LCD
3890
3891* Allow booting from old "PPCBoot" disk partitions
3892
3893* Add support for TQM8255 Board / MPC8255 CPU
3894
3895======================================================================
wdenkedaa4892003-04-20 17:41:25 +00003896Changes for U-Boot 0.3.1:
wdenk6bd14892003-04-10 11:18:18 +00003897======================================================================
3898
wdenk92bbe3f2003-04-20 14:04:18 +00003899* Make sure Block Lock Bits get cleared in R360MPI flash driver
3900
3901* MPC823 LCD driver: Fill color map backwards, to allow for steady
3902 display when Linux takes over
3903
3904* Patch by Erwin Rol, 27 Feb 2003:
3905 Add support for RTEMS (this time for real).
3906
3907* Add support for "bmp info" and "bmp display" commands to load
3908 bitmap images; this can be used (for example in a "preboot"
3909 command) to display a splash screen very quickly after poweron.
3910
3911* Add support for 133 MHz clock on INCA-IP board
3912
wdenk3f9ab982003-04-12 23:38:12 +00003913* Patch by Lutz Dennig, 10 Apr 2003:
3914 Update for R360MPI board
3915
3916* Add new meaning to "autostart" environment variable:
3917 If set to "no", a standalone image passed to the
3918 "bootm" command will be copied to the load address
3919 (and eventually uncompressed), but NOT be started.
3920 This can be used to load and uncompress arbitrary
3921 data.
3922
stroeseee14b832003-04-10 13:30:28 +00003923* Patch by Stefan Roese, 10 Apr 2003:
wdenk3f9ab982003-04-12 23:38:12 +00003924 Changed DHCP client to use IP address from server option field #54
3925 from the OFFER packet in the server option field #54 in the REQUEST
3926 packet. This fixes a problem using a Windows 2000 DHCP server,
3927 where the DHCP-server is not the TFTP-server.
3928
3929* Set max brightness for MN11236 displays on TRAB board
stroeseee14b832003-04-10 13:30:28 +00003930
wdenk6bd14892003-04-10 11:18:18 +00003931* Add support for TQM862L modules
3932
3933======================================================================
wdenka6db71d2003-04-08 23:25:21 +00003934Changes for U-Boot 0.3.0:
wdenkeda42082003-01-17 16:27:01 +00003935======================================================================
3936
wdenkb02744a2003-04-05 00:53:31 +00003937* Patch by Arun Dharankar, 4 Apr 2003:
3938 Add IDMA example code (tested on 8260 only)
3939
3940* Add support for Purple Board (MIPS64 5Kc)
3941
3942* Add support for MIPS64 5Kc CPUs
3943
3944* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
3945
3946* Patch by Denis Peter, 04 Apr 2003:
3947 - update MIP405-4 board
3948
stroese2606cf12003-04-04 16:55:30 +00003949* Patch by Stefan Roese, 4 Apr 2003:
3950 - U-Boot version environment variable "ver" added
3951 (CONFIG_VERSION_VARIABLE).
3952 - Changed PPC405GPr version from A to B.
3953 - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
3954
wdenkb02744a2003-04-05 00:53:31 +00003955* Patches by Denis Peter, 03 April 2003:
3956 - fix PCI IRQs on MPL boards
3957 - fix two more un-relocated pointer problems
3958
3959* Fix behaviour of "run" command:
3960 - print error message iv variable does not exist
3961 - terminate processing of arguments in case of error
3962
3963* Patches by Peter Figuli, 10 Mar 2003
3964 - Add support for BTUART on PXA platform
3965 - Add support for WEP EP250 (PXA) board
3966
3967* Fix flash problems on INCA-IP; add tool to allow bruning images to
3968 flash using a BDI2000
3969
3970* Implement fix for I2C Edge Conditions problem for all boards that
3971 use the bit-banging driver (common/soft_i2c.c)
3972
wdenk359733b2003-03-31 17:27:09 +00003973* Patch by Martin Winistoerfer, 23 Mar 2003
3974 - Add port to MPC555/556 microcontrollers
3975 - Add support for cmi customer board with
3976 Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
3977
3978* Patch by Rick Bronson, 28 Mar 2003:
3979 - fix common/cmd_nand.c
3980
wdenk8dba0502003-03-31 16:34:49 +00003981* Patch by Arun Dharankar, 24 Mar 2003:
3982 - add threads / scheduler example code
3983
3984* Add patches by Robert Schwebel, 31 Mar 2003:
3985 - add ctrl-c support for kermit download
3986 - align bdinfo output on ARM
wdenkb02744a2003-04-05 00:53:31 +00003987 - csb226 board: bring in sync with innokom/memsetup.S
3988 - csb226 board: fix MDREFR handling
3989 - misc doc fixes / extensions
3990 - innokom board: cleanup, MDREFR fix in memsetup.S, config update
3991 - add BOOT_PROGRESS to armlinux.c
wdenk8dba0502003-03-31 16:34:49 +00003992
stroese2606cf12003-04-04 16:55:30 +00003993* Add CPU ID, version, and clock speed for INCA-IP
wdenk8dba0502003-03-31 16:34:49 +00003994
wdenk5840af22003-03-28 14:40:36 +00003995* Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
3996 - fix SRAM and SDRAM memory sizing
3997 - add status LED support
3998 - add MAC address for second (SCC1) ethernet port
3999
4000* Update default environment for TQM8260 board
4001
wdenkc8434db2003-03-26 06:55:25 +00004002* Patch by Rick Bronson, 16 Mar 2003:
wdenkbb1b8262003-03-27 12:09:35 +00004003 - Add NAND flash support for reading, writing, and erasing NAND
4004 flash (certain forms of which are called SmartMedia).
4005 - Add support for Atmel AT91RM9200DK ARM920T based development kit.
wdenkc8434db2003-03-26 06:55:25 +00004006
4007* Patches by Robert Schwebel, 19 Mar 2003:
4008 - use arm-linux-gcc as default compiler for ARM
4009 - fix i2c fixup code
4010 - fix missing baudrate setting
4011 - added $loadaddr / CFG_LOAD_ADDR support to loadb
4012 - moved "ignoring trailing characters" _before_ u-boot wants to
4013 print out diagnostics messages; removes bogus characters at the
4014 end of transmission
4015
4016* Patch by John Zhan, 18 Mar 2003:
4017 Add support for SinoVee Microsystems SC8xx boards
4018
4019* Patch by Rolf Offermanns, 21 Mar 2003:
4020 ported the dnp1110 related changes from the current armboot cvs to
4021 current u-boot cvs. smc91111 does not work. problem marked in
4022 smc91111.c, grep for "FIXME".
4023
4024* Patch by Brian Auld, 25 Mar 2003:
4025 Add support for STM flash chips on ebony board
4026
wdenk28536032003-03-25 16:50:56 +00004027* Add PCI support for MPC8250 Boards (PM825 module)
4028
stroesea95be4d2003-03-25 14:44:48 +00004029* Patch by Stefan Roese, 25 Mar 2003:
4030 - PCI405 update.
4031
stroesef2afa912003-03-20 15:32:59 +00004032* Patch by Stefan Roese, 20 Mar 2003:
4033 - CPCI4052 update (support for revision 3).
4034 - Set edge conditioning circuitry on PPC405GPr for compatibility
4035 to existing PPC405GP designs.
4036 - Clip udiv to 5 bits on PPC405 (serial.c).
4037
wdenkbb1b8262003-03-27 12:09:35 +00004038* Extend INCAIP board support:
4039 - add automatic RAM size detection
4040 - add "bdinfo" command
4041 - pass flash address and size to Linux kernel
4042 - switch to 150 MHz clock
4043
wdenk6b58f332003-03-14 20:47:52 +00004044* Avoid flicker on the TRAB's VFD by synchronizing the enable with
4045 the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
4046 boards, version 153 for Rev. 200 boards).
4047
4048* Patch by Vladimir Gurevich, 12 Mar 2003:
4049 Fix relocation problem of statically initialized string pointers
4050 in common/cmd_pci.c
4051
4052* Patch by Kai-Uwe Blöm, 12 Mar 2003:
4053 Cleanup & bug fixes for JFFS2 code:
4054 - the memory mangement was broken. It caused havoc on malloc by
4055 writing beyond the block boundaries.
4056 - the length calculation for files was wrong, sometimes resulting
4057 in short file reads.
4058 - data copying now optionally takes fragment version numbers into
4059 account, to avoid copying from older data.
4060 See doc/README.JFFS2 for details.
4061
wdenkef5fe752003-03-12 10:41:04 +00004062* Patch by Josef Wagner, 12 Mar 2003:
4063 - 16/32 MB and 50/80 MHz support with auto-detection for IP860
4064 - ETH05 and BEDBUG support for CU824
4065 - added support for MicroSys CPC45
4066 - new BOOTROM/FLASH0 and DOC base for PM826
4067
4068* Patch by Robert Schwebel, 12 Mar 2003:
4069 Fix the chpart command on innokom board
4070
4071* Name cleanup:
4072 mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
4073 s/PPCBoot/U-Boot/ in some files
4074 s/pImage/uImage/ in some files
4075
4076* Patch by Detlev Zundel, 15 Jan 2003:
4077 Fix '' command line quoting
4078
4079* Patch by The LEOX team, 19 Jan 2003:
4080 - add support for the ELPT860 board
4081 - add support for Dallas ds164x RTC
4082
wdenk1fe2c702003-03-06 21:55:29 +00004083* Patches by David Müller, 31 Jan 2003:
4084 - minimal setup for CardBus bridges
4085 - add EEPROM read/write support in the CS8900 driver
4086 - add support for the builtin I2C controller in the Samsung s3c24x0 chips
wdenkef5fe752003-03-12 10:41:04 +00004087 - add support for MPL's VCMA9 (Samsung s3c2410 based) board
wdenk1fe2c702003-03-06 21:55:29 +00004088
4089* Patch by Steven Scholz, 04 Feb 2003:
4090 add support for RTC DS1307
4091
4092* Patch by Reinhard Meyer, 5 Feb 2003:
4093 fix PLPRCR/SCCR init sequence on 8xx to allow for
4094 changes of EBDF by software
4095
4096* Patch by Vladimir Gurevich, 07 Feb 2003:
4097 "API-compatibility patch" for 4xx I2C driver
4098
4099* TRAB fixes / extensions:
4100 - Restore VFD brightness as saved in environment
wdenkd155afb2003-06-18 20:22:24 +00004101 - add support for Fujitsu flashes
wdenk1fe2c702003-03-06 21:55:29 +00004102 - make sure both buzzers are turned off (drive low level)
4103
wdenkcc1e2562003-03-06 13:39:27 +00004104* Patches by Robert Schwebel, 06 Mar 2003:
4105 - fix bug in BOOTP code (must use NetCopyIP)
4106 - update of CSB226 port
4107 - clear BSS segment on XScale
4108 - added support for i2c_init_board() function
4109 - update to the Innokom plattform
4110
4111* Extend support for redundand environments for configurations where
4112 environment size < sector size
4113
wdenkb666c8f2003-03-06 00:58:30 +00004114* Patch by Rune Torgersen, 13 Feb 2003:
4115 Add support for Motorola MPC8266ADS board
4116
4117* Patch by Kyle Harris, 19 Feb 2003:
4118 patches for the Intel lubbock board:
4119 memsetup.S - general cleanup (based on Robert's csb226 code)
4120 flash.c - overhaul, actually works now
4121 lubbock.c - fix init funcs to return proper value
4122
4123* Patch by Kenneth Johansson, 26 Feb 2003:
stroesef2afa912003-03-20 15:32:59 +00004124 - Fixed off by one in RFTA calculation.
wdenkb666c8f2003-03-06 00:58:30 +00004125 - No need to abort when LDF is lower than we can program it's only
stroesef2afa912003-03-20 15:32:59 +00004126 minimum timing so clamp it to what we can do.
wdenkb666c8f2003-03-06 00:58:30 +00004127 - Takes function pointer to function for reading the spd_nvram. Usefull
4128 for faking data or hardcode a module without the nvram.
4129 - fix other user for above change
4130 - fix some comments.
4131
4132* Patches by Brian Waite, 26 Feb 2003:
4133 - fix port for evb64260 board
4134 - fix PCI for evb64260 board
4135 - fix PCI scan
4136
4137* Patch by Reinhard Meyer, 1 Mar 2003:
4138 Add support for EMK TOP860 Module
4139
4140* Patch by Yuli Barcohen, 02 Mar 2003:
4141 Add SPD EEPROM support for MPC8260ADS board
4142
wdenk4a5c8a72003-03-06 00:02:04 +00004143* Patch by Robert Schwebel, 21 Jan 2003:
4144 - Add support for Innokom board
4145 - Don't complain if "install" fails
4146 - README cleanup (remove duplicated lines)
4147 - Update PXA header files
4148
4149* Add documentation for existing POST code (doc/README.POST)
4150
4151* Patch by Laudney Ren, 15 Jan 2003:
4152 Fix handling of redundand environment in "tools/envcrc.c"
4153
4154* Patch by Detlev Zundel, 28 Feb 2003:
4155 Add bedbug support for 824x systems
4156
4157* Add support for 16 MB flash configuration of TRAB board
4158
4159* Patch by Erwin Rol, 27 Feb 2003:
4160 Add support for RTEMS
4161
4162* Add image information to README
4163
stroesefd4b5a72003-02-18 11:30:24 +00004164* Patch by Stefan Roese, 18 Feb 2003:
4165 CPCIISER4 configuration updated.
4166
stroese85d0fec2003-02-17 16:06:06 +00004167* Patch by Stefan Roese, 17 Feb 2003:
4168 Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
4169
stroesef5dd4102003-02-14 11:21:23 +00004170* Patch by Stefan Roese, 13 Feb 2003:
4171 Add "pcidelay" environment variable (in ms, enabled via
4172 CONFIG_PCI_BOOTDELAY).
4173 PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
4174 RST# to respond to configuration cycles (33MHz -> 1s).
4175
wdenk4a5c8a72003-03-06 00:02:04 +00004176* Fix dual PCMCIA slot support (when running with just one
4177 slot populated)
4178
4179* Add VFD type detection to trab board
4180
4181* extend drivers/cs8900.c driver to synchronize ethaddr environment
4182 variable with value in the EEPROM
4183
stroese91ee5282003-02-10 16:39:00 +00004184* Patch by Stefan Roese, 10 Feb 2003:
4185 Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
4186
wdenkbb1b8262003-03-27 12:09:35 +00004187* Add support for MIPS32 4Kc CPUs
4188
4189* Add support for INCA-IP Board
4190
wdenk4a5c8a72003-03-06 00:02:04 +00004191======================================================================
4192Changes for U-Boot 0.2.2:
4193======================================================================
4194
wdenkeda42082003-01-17 16:27:01 +00004195* Add dual ethernet support on PM826
4196
4197* Add support for LXT971 PHY on PM826
4198
4199* Patch by Tord Andersson, 16 Jan 2003:
4200 Fix flash sector count for TQM8xxL
4201
4202* Fix I2C EEPROM problem on ICU862 board (would only write the first
4203 16 bytes out of each 32 byte block)
4204
4205======================================================================
4206Changes for U-Boot 0.2.1:
wdenk2f87a3f2002-12-20 23:42:25 +00004207======================================================================
4208
wdenk2dad91b2003-01-13 23:54:46 +00004209* Add support for V37 board
4210 (patch by Jón Benediktsson, 11 Dec 2002)
4211
wdenke7f34c62003-01-11 09:48:40 +00004212* Update baudrate in bd_info when it gets changed
4213
4214* Add watchdog trigger points while waiting for serial port
4215 (so far only 8xx -- needed on LWMON with 100ms watchdog)
4216
4217* Improve command line tool to access the U-Boot's environment
4218 (figuration of the utility, using a config file)
4219
wdenk654868c2003-01-02 23:57:29 +00004220* Add single quote support for (old) command line parser
4221
wdenk2f87a3f2002-12-20 23:42:25 +00004222* Switch LWMON board default config from FRAM to EEPROM;
4223 in POST, EEPROM shows up on 8 addresses
4224
4225======================================================================
wdenka08708c2002-12-17 18:07:30 +00004226Changes for U-Boot 0.2.0:
wdenk24ee89b2002-11-03 17:56:27 +00004227======================================================================
4228
wdenk34b613e2002-12-17 01:51:00 +00004229* Use 1-byte-read instead of -write for iprobe() function
4230 Add i2c commands to PM826 config
4231
4232* extend I2C POST code: check for list on known addresses
4233
wdenk9dfa8d12002-12-08 09:53:23 +00004234* Improve log buffer code; use "loglevel" to decide which messages
4235 to log on the console, too (like in Linux); get rid of "logstart"
4236
4237* Add command line tool to access the U-Boot's environment
4238 (board-specific for TRAB now, to be fixed later)
4239
wdenkbb444c92002-12-07 00:20:59 +00004240* Patch by Hans-Joerg Frieden, 06 Dec 2002
4241 Fix misc problems with AmigaOne support
4242
4243* Patch by Chris Hallinan, 3 Dec 2002:
4244 minor cleanup to the MPC8245 EPIC driver
4245
4246* Patch by Pierre Aubert , 28 Nov 2002
4247 Add support for external (SIU) interrupts on MPC8xx
4248
4249* Patch by Pierre Aubert , 28 Nov 2002
4250 Fix nested syscalls bug in standalone applications
4251
4252* Patch by David Müller, 27 Nov 2002:
4253 fix output of "pciinfo" command for CardBus bridge devices.
4254
4255* Fix bug in TQM8260 board detection - boards got stuck when board ID
4256 was not readable
4257
wdenk90e7e422002-12-04 23:39:58 +00004258* Add LED indication for IDE activity on KUP4K board
4259
wdenk9dd2b882002-12-03 21:28:10 +00004260* Fix startup problems with VFD display on TRAB
4261
4262* Patch by Pierre Aubert, 20 Nov 2002
4263 Add driver for Epson SED13806 graphic controller.
4264 Add support for BMP logos in cfb_console driver.
4265
wdenk2029f4d2002-11-21 23:11:29 +00004266* Added support for both PCMCIA slots (at the same time!) on MPC8xx
4267
4268* Patch by Rod Boyce, 21 Nov 2002:
4269 fix PCMCIA on MBX8xx board
4270
4271* Patch by Pierre Aubert , 21 Nov 2002
4272 Add CFG_CPM_POST_WORD_ADDR to make the offset of the
4273 bootmode word in DPRAM configurable
4274
wdenk67ff36c2002-11-19 23:01:07 +00004275* Patch by Daniel Engström, 18 Nov 2002:
4276 Fixes for x86 port (mostly strings issues)
4277
4278* Patch by Ken Chou, 18 Nov 2002:
4279 Fix for natsemi NIC cards (DP83815)
4280
4281* Patch by Pierre Aubert, 19 Nov 2002:
4282 fix a bug for the MII configuration, and some warnings
4283
wdenk452cfd62002-11-19 11:04:11 +00004284* Patch by Thomas Frieden, 13 Nov 2002:
4285 Add code for AmigaOne board
4286 (preliminary merge to U-Boot, still WIP)
4287
4288* Patch by Jon Diekema, 12 Nov 2002:
4289 - Adding URL for IEEE OUI lookup
4290 - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
4291 being defined.
4292 - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
4293 root-on-nfs macros are designed to switch how the default boot
4294 method gets defined.
4295
wdenk591dda52002-11-18 00:14:45 +00004296* Patch by Daniel Engström, 13 Nov 2002:
4297 Add support for i386 architecture and AMD SC520 board
4298
4299* Patch by Pierre Aubert, 12 Nov 2002:
4300 Add support for DOS filesystem and booting from DOS floppy disk
4301
wdenk2582f6b2002-11-11 21:14:20 +00004302* Patch by Jim Sandoz, 07 Nov 2002:
4303 Increase number of network RX buffers (PKTBUFSRX in
4304 "include/net.h") for EEPRO100 based boards (especially SP8240)
4305 which showed "Receiver is not ready" errors when U-Boot was
4306 processing the receive buffers slower than the network controller
4307 was filling them.
4308
wdenkc217f6d2002-11-11 02:11:37 +00004309* Patch by Andreas Oberritter, 09 Nov 2002:
4310 Change behaviour of NetLoop(): return -1 for errors, filesize
4311 otherwise; return code 0 is valid an means no file loaded - in this
4312 case the environment still gets updated!
4313
4314* Patches by Jon Diekema, 9 Nov 2002:
4315 - improve ADC/DAC clocking on the SACSng board to align
4316 the failing edges of LRCLK and SCLK
4317 - sbc8260 configuration tweaks
4318 - add status LED support for 82xx systems
4319 - wire sspi/sspo commands into command handler; improved error
4320 handlering
4321 - add timestamp support and alternate memory test to the
4322 SACSng configuration
4323
4324* Patch by Vince Husovsky, 7 Nov 2002:
wdenk1272e232002-11-10 22:06:23 +00004325 Add "-n" to linker options to get rid of "Not enough room for
4326 program headers" problem
4327
4328* Patch by David Müller, 05 Nov 2002
4329 Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
4330 so we can use an already existing name
4331
4332* Patch by Pierre Aubert, 05 Nov 2002
4333 Hardware relatied improvments in FDC boot code
4334
4335* Patch by Holger Schurig, 5 Nov 2002:
4336 Make the PXA really change it's frequency
4337
4338* Patch by Pierre Aubert, 05 Nov 2002
4339 Add support for slave serial Spartan 2 FPGAs
4340
4341* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
4342 drivers
4343
wdenk56f94be2002-11-05 16:35:14 +00004344* Add support for log buffer which can be passed to Linux kernel's
4345 syslog mechanism; used especially for POST results.
4346
4347* Patch by Klaus Heydeck, 31 Oct 2002:
4348 Add initial support for kup4k board
4349
wdenk384ae022002-11-05 00:17:55 +00004350* Patch by Robert Schwebel, 04 Nov 2002:
4351 - use watchdog to reset PXA250 systems
4352 - added progress callbacks to (some of the) ARM code
4353 - update for Cogent CSB226 board
4354
4355* Add support for FPS860 board
4356
wdenke95b61c2002-11-04 16:02:40 +00004357* Patch by Guillaume Alexandre,, 04 Nov 2002:
4358 Improve PCI access on 32-bits Compact PCI bus
4359
wdenk24ee89b2002-11-03 17:56:27 +00004360* Fix mdelay() on TRAB - this was still the debugging version with
4361 seconds instead of ms.
4362
4363* Patch by Robert Schwebel, 1 Nov 2002:
4364 XScale related cleanup (affects all ARM boards)
4365
4366* Cleanup of names and README.
wdenkcc1c8a12002-11-02 22:58:18 +00004367
4368======================================================================
wdenk24ee89b2002-11-03 17:56:27 +00004369Notes for U-Boot 0.1.0:
wdenkcc1c8a12002-11-02 22:58:18 +00004370======================================================================
4371
4372This is the initial version of "Das U-Boot", the Universal Boot Loader.
4373
4374It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
4375For information about the history of the project please see the
4376PPCBoot project page at http://sourceforge.net/projects/ppcboot
4377
4378======================================================================