Squashed 'dts/upstream/' changes from 7e08733c96c8..20e0f0897ea2 20e0f0897ea2 Merge tag 'v6.10-dts-raw' 9881d733059f Merge tag 'v6.10-rc7-dts-raw' 63c31204aa11 Merge tag 'sunxi-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes 23e9298c3dde Merge tag 'qcom-drivers-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes a5f0db70c762 Merge tag 'qcom-arm64-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes fc4d96ea6760 Revert "dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries" 46fc6e869a85 Merge tag 'arm-fixes-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 383b8c948357 Merge tag 'v6.10-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes 1ff5952edb57 Merge tag 'v6.10-rc6-dts-raw' 0ca968fa0d3f Merge tag 'net-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 10fcf51ad7e0 Merge tag 'riscv-dt-fixes-for-v6.10-rc5+' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes 268d5cb92800 arm64: dts: rockchip: Add sound-dai-cells for RK3368 dd58f1b3fe58 arm64: dts: rockchip: Fix the i2c address of es8316 on Cool Pi 4B 2e2d3a545342 Merge tag 'pinctrl-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl e0c9ccf9429c Merge tag 'v6.10-rc5-dts-raw' a3aee09ae954 Merge tag 'i2c-for-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux ac8de69b9a05 Merge branch 'scripting' f887908e49ad Patch git-filter-branch to split state file 1ff8cba394ac Import git-filter-branch 1f73d9f38a31 dt-bindings: net: fman: remove ptp-timer from required list aa50e7a5738c Merge tag 'arm-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc a905c57aa59d Merge tag 'dmaengine-fix-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine 033afe44d815 arm64: dts: qcom: qdu1000: Fix LLCC reg property ac6085ba7cd5 arm64: dts: qcom: sm6115: add iommu for sdhc_1 8f31c6e16d9b dt-bindings: i2c: google,cros-ec-i2c-tunnel: correct path to i2c-controller schema ecc33037d047 dt-bindings: i2c: atmel,at91sam: correct path to i2c-controller schema b16dfe4648c8 Merge tag 'riscv-sophgo-dt-fixes-for-v6.10-rc4' of https://github.com/sophgo/linux into arm/fixes f85451ad2ae3 Merge tag 'imx-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes 4d2c25ce06fb arm64: dts: rockchip: fix PMIC interrupt pin on ROCK Pi E 41a24700d4d1 riscv: dts: starfive: Set EMMC vqmmc maximum voltage to 3.3V on JH7110 boards 6eaa11b25a95 riscv: dts: sophgo: disable write-protection for milkv duo 2095629696ec arm64: dts: rockchip: make poweroff(8) work on Radxa ROCK 5A 0f13320af297 Revert "arm64: dts: rockchip: remove redundant cd-gpios from rk3588 sdmmc nodes" 0620546b6733 ARM: dts: rockchip: rk3066a: add #sound-dai-cells to hdmi node 4611b52d5bfe arm64: dts: rockchip: Fix the value of `dlg,jack-det-rate` mismatch on rk3399-gru bbbfd7e077bb dt-bindings: pinctrl: qcom,pmic-gpio: drop pm8008 9accaa155f11 Merge tag 'v6.10-rc4-dts-raw' 2013523900d1 arm64: dts: imx8qm-mek: fix gpio number for reg_usdhc2_vmmc 0ae20e9e959c arm64: dts: qcom: x1e80100-crd: fix DAI used for headset recording 0b659e2170b6 arm64: dts: qcom: x1e80100-crd: fix WCD audio codec TX port mapping 8382a880d3c3 Merge tag 'usb-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb dcabd676f1a3 Merge tag 'char-misc-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc cc13bb40d1a6 arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pin 7f72250809b5 arm64: dts: imx93-11x11-evk: Remove the 'no-sdio' property d874a607615a arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix BT shutdown GPIO 4eb33c524819 arm: dts: imx53-qsb-hdmi: Disable panel instead of deleting node 78d14f0ab675 arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM 4e86701872de Merge tag 'net-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 981b77cd0427 dt-bindings: dma: fsl-edma: fix dma-channels constraints 18988f4d5d2a Merge tag 'v6.10-rc3-dts-raw' 7da36558a7ef Merge tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid 88d1360549bb arm64: dts: rockchip: set correct pwm0 pinctrl on rk3588-tiger 11452c600e6a Merge tag 'iio-fixes-for-6.10a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus 084aa7375145 arm64: dts: qcom: sc8280xp-crd: use external pull up for touch reset 0e6bf883e88f arm64: dts: qcom: sc8280xp-x13s: fix touchscreen power on e614df5979b3 dt-bindings: net: dp8386x: Add MIT license along with GPL-2.0 f7c56b502493 dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property 1978b946690b dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M 5495c8832594 dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema 9e26c6d54d11 input: Add support for "Do Not Disturb" 37570b57104f input: Add event code for accessibility key cdef8a0e7a60 arm64: dts: qcom: x1e80100: Fix PCIe 6a reg offsets and add MHI 3f139ae589c4 Merge tag 'devicetree-fixes-for-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 7cf2ce6b6ba4 arm64: dts: qcom: sa8775p: Correct IRQ number of EL2 non-secure physical timer f2fbbacd60a4 dt-bindings: usb: realtek,rts5411: Add missing "additionalProperties" on child nodes 164ee20c8b58 Merge tag 'v6.10-rc2-dts-raw' 48b74b73a14e LoongArch: Fix GMAC's phy-mode definitions in dts 087d672b4efd arm64: dts: freescale: imx8mm-verdin: Fix GPU speed 80fffb23d496 Merge tag 'net-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 54dda23c281e dt-bindings: arm: stm32: st,mlahb: Drop spurious "reg" property from example 2c63db1445be dt-bindings: arm: sunxi: Fix incorrect '-' usage 1d5708f86ae5 arm64: dts: allwinner: Fix PMIC interrupt number 6c601b11ba2a riscv: dts: canaan: Disable I/O devices unless used 92348c3ef236 riscv: dts: canaan: Clean up serial aliases 5d83fd10a397 dt-bindings: net: pse-pd: ti,tps23881: Fix missing "additionalProperties" constraints 6b2fa7b7cc40 dt-bindings: net: pse-pd: microchip,pd692x0: Fix missing "additionalProperties" constraints 50cb397e5cfd arm64: dts: rockchip: Rename LED related pinctrl nodes on rk3308-rock-pi-s c9ccb008ab27 arm64: dts: rockchip: Fix SD NAND and eMMC init on rk3308-rock-pi-s 8e6eda922a09 arm64: dts: rockchip: Fix rk3308 codec@ff560000 reset-names 7f489c4cf57b arm64: dts: rockchip: Fix the DCDC_REG2 minimum voltage on Quartz64 Model B 299c3b3c66d9 arm64: dts: qcom: sc8280xp: Set status = "reserved" on PSHOLD 2b6c08b1583d dt-bindings: iio: dac: fix ad354xr output range 9f79d4c15d08 Merge tag 'v6.10-rc1-dts-raw' fd0f921ffa6c arm64: dts: qcom: x1e80100-*: Allocate some CMA buffers 26c71714bb61 arm64: dts: qcom: sc8180x: Fix LLCC reg property again 2092f8f48d57 Merge tag 'rtc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux 07e14840ad5b Merge tag 'input-for-v6.10-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 13ccd59b5258 Merge tag 'sound-fix-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound 37a1f7e6722d Merge tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc 7ff78d0eda0d Merge tag 'tty-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty c5041b729865 Merge tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 1c57e8db82e7 Merge tag 'leds-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds fd47bd25ce86 Merge tag 'mfd-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd 00ece62bff8b dt-bindings: input: touchscreen: edt-ft5x06: Document FT5452 and FT8719 support 6f66f547411e Merge tag 'loongarch-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson abd7af883f03 Merge tag 'phy-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy 640e500cce85 Merge tag 'dmaengine-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine b9fd3a8c4565 Merge tag 'mailbox-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox b33f557e1d90 Merge tag 'rproc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux db01c383a7ce Merge tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci 0df9e98310e7 ASoC: dt-bindings: stm32: Ensure compatible pattern matches whole string d8db35c82ce1 Merge tag 'soc-dt-late-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc f8e08c751522 Merge tag 'mips_6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux 9caaf0aa30d4 Merge tag 'i2c-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux 6ab09d9cca9e Merge tag 'pinctrl-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl 9325c648da25 dt-bindings: mailbox: qcom-ipcc: Document the SDX75 IPCC 8bf6a8f1f802 dt-bindings: mailbox: qcom: Add MSM8974 APCS compatible 2e132b836729 dt-bindings: mailbox: arm,mhuv3: Add bindings 74b961ca5252 Merge tag 'for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply 71ece5053ab1 Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux 2d9444bc11e2 Merge tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild d27b169f2113 Merge tag 'iommu-updates-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu 0d52486eadc9 Merge tag 'random-6.10-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random 92ca6dd0a585 Merge tag 'net-6.10-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net d9138c3c1217 Merge tag 'devicetree-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 993251900df7 dt-bindings: net: ti: Update maintainers list 6fedb16407e2 Merge tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux 5f1b352c20a8 dt-bindings: net: qcom: ethernet: Allow dma-coherent a87254134e0a Merge branches 'clk-microchip', 'clk-samsung' and 'clk-qcom' into clk-next e11cd4900b3c Merge branches 'clk-counted', 'clk-imx', 'clk-amlogic', 'clk-binding' and 'clk-rockchip' into clk-next 0dd8b4fc25ba Merge branches 'clk-stm', 'clk-renesas', 'clk-scmi' and 'clk-allwinner' into clk-next 6f21c834494e Merge branches 'clk-cleanup', 'clk-airoha', 'clk-mediatek', 'clk-sophgo' and 'clk-loongson' into clk-next 2fa059a4cd10 Merge tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 0202c4f79771 Merge tag 'mtd/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux 8cb25a01f0ea Merge tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc 074ab5a279da Merge tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media b1541fce9b3b dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios c358ed679396 Merge tag 'sound-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound 06ae5fd04d8f Merge tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel fd0e36fa021c dt-bindings: PCI: rcar-gen4-pci-ep: Add R-Car V4H compatible fa14cdcce968 dt-bindings: PCI: rcar-gen4-pci-host: Add R-Car V4H compatible b69670b0bb47 dt-bindings: PCI: layerscape-pci: Convert to YAML format cca86ffd0a16 dt-bindings: PCI: mediatek,mt7621-pcie: Switch from deprecated pci-bus.yaml ae64917a411a dt-bindings: PCI: host-bridges: Switch from deprecated pci-bus.yaml 1201fe875e92 dt-bindings: PCI: mediatek,mt7621: Add missing child node reg ba00158ae744 dt-bindings: PCI: cdns,cdns-pcie-host: Drop redundant msi-parent and pci-bus.yaml 5b6552bfdc78 dt-bindings: PCI: ti,am65: Fix remaining binding warnings d7e666da2887 Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next 2d9531926675 Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi db5eb37c03e9 Merge tag 'ata-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux 5a032ee2fc23 Merge tag 'gpio-updates-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux ccc224839058 Merge tag 'pwm/for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux 775802858417 Merge tag 'hwmon-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging fdde6e57ef72 Merge tag 'spi-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi 99645799c95b Merge tag 'regulator-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator 1eaaff2bbf2a Merge tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm ab29be69f525 Merge tag 'thermal-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm 4075f17dbd78 Merge tag 'sh-for-v6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux 757f8a19300b Merge tag 'irq-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip dab08a165fab Merge tag 'timers-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip feef09f5a21f dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth 76d9d779fa78 dt-bindings: net: broadcom-bluetooth: Add CYW43439 DT binding 17441a5c4e4e LoongArch: dts: Add new supported device nodes to Loongson-2K2000 1f7ba0207e26 LoongArch: dts: Add new supported device nodes to Loongson-2K0500 a48765b239a2 LoongArch: dts: Remove "disabled" state of clock controller node 7773d8323bfe dt-bindings: net: renesas,rzn1-gmac: Document RZ/N1 GMAC support ca2a5ced698c Merge tag 'v6.10-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 505e43f254ef Merge branch 'pm-cpufreq' 76f483e4cfc6 Merge tag 'tpmdd-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd b1df36fb36a6 Merge tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc fd1841fda6fd Merge tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 36770442d6b0 dt-bindings: display: panel: constrain 'reg' in DSI panels 813c5f459022 dt-bindings: display: panel: constrain 'reg' in SPI panels 41038ea2e4ff dt-bindings: display: samsung,ams495qa01: add missing SPI properties ref 10a89c799c00 Merge branches 'arm/renesas', 'arm/smmu', 'x86/amd', 'core' and 'x86/vt-d' into next 8910725cb527 dt-bindings: mfd: Use full path to other schemas 3b040755ae18 dt-bindings: mfd: Convert lp873x.txt to json-schema 296f112623fd dt-bindings: mfd: aspeed: Drop 'oneOf' for pinctrl node a5a854afbee2 dt-bindings: mfd: allwinner,sun6i-a31-prcm: Use hyphens in node names 90a90b23d03b dt-bindings: mfd: qcom: pm8xxx: Add pm8901 compatible da7f08aacdf2 dt-bindings: mfd: qcom,spmi-pmic: Add pbs to SPMI device types 966ad7078eaa dt-bindings: mfd: syscon: Add ti,am62p-cpsw-mac-efuse compatible c4b18ab23407 dt-bindings: mfd: qcom,tcsr: Add compatible for SDX75 c3d99b909e44 dt-bindings: mfd: Add ROHM BD71879 9384afa70b33 dt-bindings: mfd: syscon: Add missing simple syscon compatibles 960f32f46fea dt-bindings: mfd: Add ROHM BD71828 system-power-controller property cf10554091fd dt-bindings: mfd: twl: Convert trivial subdevices to json-schema 9715f4656242 Merge branches 'ib-mfd-misc-pinctrl-regulator-6.10', 'ib-mfd-pinctrl-regulator-6.10' and 'ib-mfd-regulator-6.10' into ibs-for-mfd-merged ac7a1ec8dbb7 dt-bindings: usb: qcom,dwc3: fix interrupt max items 1b6db377e73b dt-bindings: timer: renesas: ostm: Document Renesas RZ/V2H(P) SoC 4d0b690a0f3e Merge 6.9-rc7 into usb-next 3842450e242a Merge tag 'drm-msm-next-2024-05-07' of https://gitlab.freedesktop.org/drm/msm into drm-next 5896b040800b kbuild: use $(src) instead of $(srctree)/$(src) for source directory 73f4d08d8786 dt-bindings: tpm: Add st,st33ktpm2xi2c 620cdf951609 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net cadca550c946 regulator: dt-bindings: Add Allwinner D1 system LDOs 95cb4a04aa59 Merge tag 'wireless-next-2024-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next 934735047002 dt-bindings: net: ipq4019-mdio: add IPQ9574 compatible 95ceac809a55 Merge tag 'riscv-dt-for-v6.10-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt-late 680612099c31 dt-bindings: Use full path to other schemas a2ec1b583d96 dt-bindings: spmi: Deprecate qcom,bus-id 3ef3f7c10b00 dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema af55caf92fae dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example 8282c49f66a5 dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references 62c077472f2a Merge 6.9-rc7 into char-misc-testing 6f7bdf23be5b dt-bindings: PCI: qcom,pcie-sm8350: Drop redundant 'oneOf' sub-schema 37b24b375144 Merge tag 'qcom-arm64-for-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt 0bde68085fa9 Merge tag 'qcom-drivers-for-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers 998c25c937aa dt-bindings: clocks: stm32mp25: add access-controllers description 30e9fba2158e riscv: dts: microchip: add pac1934 power-monitor to icicle d6ee54e20abf RISC-V: add Milkv Mars board devicetree 0aa7d6d24f60 riscv: dts: thead: Fix node ordering in TH1520 device tree 6ee47d28e440 powerpc: Fix typos 3ba1815ef20a powerpc: dts: fsl: rename ifc node name to be memory-controller 7efff94fbf26 powerpc: dts: mpc85xx: remove "simple-bus" compatible from ifc node 9fe4ad7ce766 powerpc: dts: p1010rdb: fix INTx interrupt issue on P1010RDB-PB 6ebf39aa9455 powerpc: dts: add power management nodes to FSL chips 348344a5d65e Merge tag 'aspeed-6.10-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt-late e86f1cd5ef14 Merge tag 'amlogic-arm64-dt-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt-late 7f9e5732c146 Merge tag 'samsung-dt64-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt 5695f8055c0c Merge tag 'v6.10-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt b97bd45a8d97 Merge tag 'mvebu-dt64-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt 5a9c9a32c3c7 dt-bindings: remoteproc: qcom,sdm845-adsp-pil: Fix qcom,halt-regs definition d5164a7c22ad dt-bindings: remoteproc: qcom,sc7280-wpss-pil: Fix qcom,halt-regs definition 71bd8853612b dt-bindings: remoteproc: qcom,qcs404-cdsp-pil: Fix qcom,halt-regs definition ba8d7136770b dt-bindings: remoteproc: qcom,msm8996-mss-pil: allow glink-edge on msm8996 62ef31a80421 dt-bindings: remoteproc: qcom,smd-edge: Mark qcom,ipc as deprecated 65fc362c2702 scsi: ufs: dt-bindings: exynos: Add gs101 compatible f534b450c173 Merge back thermal cotntrol material for v6.10. 2d917790ebaa Merge tag 'samsung-pinctrl-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel 8cf62b598531 regulator: new API for voltage reference supplies ac173748045d dt-bindings: i2c: qcom-cci: Document sc8280xp compatible 6995b93c7587 dt-bindings: i2c: renesas,riic: Document R9A09G057 support bfc00943afd2 dt-bindings: i2c: nxp,pnx-i2c: Convert to dtschema 85f529cada6f arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit address 2f63c4b78fa1 arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cells 5d8b59675398 arm64: dts: marvell: eDPU: drop redundant address/size-cells 272ed9c5b8fa dt-bindings: usb: dwc3: Add QDU1000 compatible 551f2d4471d9 dt-bindings: serial: brcm,bcm2835-aux-uart: convert to dtschema b8768b797e66 arm64: zynqmp: Add resets property for UART nodes 82c86607462f dt-bindings: serial: cdns,uart: Add optional reset property 19f5c04825b2 dt-bindings: phy: qcom,usb-snps-femto-v2: use correct fallback for sc8180x 19ad6c854263 dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: fix msm899[68] power-domains e6a7e5a9a0b3 dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: fix x1e80100-gen3x2 schema 2a3660ab6d73 dt-bindings: phy: qcom,qmp-usb: Add QDU1000 USB3 PHY ae178787ba63 dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QDU1000 c328437b7928 Merge tag 'iio-for-6.10b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next 96777d6c711d dt-bindings: clock: fixed: Define a preferred node name f43b579bac3d arm64: dts: qcom: pm6150: correct USB VBUS regulator compatible 6dfc7e3a678d dt-bindings: PCI: microchip: increase number of items in ranges property 6f960acf6e33 Merge tag 'arm-smmu-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu 52f68a03a074 dt-bindings: Drop unnecessary quotes on keys 88c8e5011c36 dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: Drop unnecessary quotes 07ae92f214f1 dt-bindings: mmc: renesas,sdhi: Document RZ/G2L family compatibility 744856737968 dt-bindings: mmc: renesas,sdhi: Group single const value items into an enum list ea9a34aa0d78 arm64: dts: rockchip: add rk3588 pcie and php IOMMUs 8634bf1c11e4 arm64: dts: rockchip: enable onboard spi flash for rock-3a afe1cedc2442 arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5 f66647cd8ff8 arm64: dts: rockchip: Enable GPU on Orange Pi 5 4fba41bce2ab arm64: dts: rockchip: enable GPU on khadas-edge2 7570dc9fb6bb arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO board 8b4785e613c3 arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute Module d96268ba01d4 arm64: dts: rockchip: Add Radxa ROCK 3C 6ef83cfb7ada dt-bindings: arm: rockchip: add Radxa ROCK 3C d7dd131cd82a Merge tag 'ath-next-20240502' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath 93b4a866bf35 dt-bindings: mfd: ti,tps6594: Add TI TPS65224 PMIC 7335736c9d78 arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl dca8a5f1a090 arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2 498c9adc4cc2 arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01] a31c51d6eabf arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive 115f542562dc dt-bindings: mfd: Add rk816 binding 4b2fb80b9d70 dt-bindings: pinctrl: qcom,pmic-gpio: Fix "comptaible" typo for PMIH0108 0c39b3c5118f dt-bindings: pinctrl: mediatek: mt7622: add "antsel" function 204d57f69a78 dt-bindings: pinctrl: mediatek: mt7622: fix array properties 9cdad5a31765 dt-bindings: nvmem: Add compatible for SC8280XP 99e9e4f0f8ef dt-bindings: nvmem: qcom,spmi-sdam: update maintainer c63963f91c46 dt-bindings: nvmem: Add compatible for sm8450, sm8550 and sm8650 f89ebb9f08f8 Merge tag 'coresight-next-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next 9c567dfe1e7c spi: dt-bindings: ti,qspi: convert to dtschema f51f7fbfe068 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 374788ecd661 Merge tag 'ti-k3-dt-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt 8ea799a75295 Merge tag 'ti-keystone-dt-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt d583b2d29084 Merge tag 'riscv-sophgo-dt-for-v6.10' of https://github.com/sophgo/linux into soc/dt 226f8a9f0d52 arm64: dts: Add/fix /memory node unit-addresses 22b584d29caf dt-bindings: kbuild: Add separate target/dependency for processed-schema.json 4e6a6fa12d6f sh: j2: Drop incorrect SPI controller spi-max-frequency property bdcb00f4f3b3 ARM: dts: aspeed: Add ASRock E3C256D4I BMC aac0710a73b4 dt-bindings: arm: aspeed: document ASRock E3C256D4I b80c8c18fac4 dt-bindings: trivial-devices: add isil,isl69269 cb1c41ce59ca arm64: dts: qcom: qcs404: fix bluetooth device address d0ae260a2e22 dt-bindings: soc: qcom,wcnss: fix bluetooth address example 7503e9a214fc arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint reader 817ddd5ea9f8 arm64: dts: qcom: sc8280xp: Add USB DWC3 Multiport controller b3fba1efeb88 dt-bindings: pwm: snps,dw-apb-timers: Do not require pwm-cells twice 50e8b723b671 dt-bindings: pwm: mediatek,pwm-disp: Do not require pwm-cells twice 8bef6380e735 dt-bindings: pwm: mediatek,mt2712: Do not require pwm-cells twice d9933a0695f9 dt-bindings: pwm: marvell,pxa: Do not require pwm-cells twice 51bdf5ce1163 dt-bindings: pwm: google,cros-ec: Do not require pwm-cells twice 3d9506504c8c dt-bindings: pwm: bcm2835: Do not require pwm-cells twice 534bc64cdedb ARM: dts: aspeed: x4tf: Add dts for asus x4tf project 6fbe3fdaf9f0 dt-bindings: arm: aspeed: add ASUS X4TF board c82854e88202 ARM: dts: aspeed: Remove Facebook Cloudripper dts fd75393bdcb1 ARM: dts: aspeed: drop unused ref_voltage ADC property 8754892d5b75 ARM: dts: aspeed: harma: correct Mellanox multi-host property 8e9cc6c20b82 ARM: dts: aspeed: yosemitev2: correct Mellanox multi-host property e2c78475b613 ARM: dts: aspeed: yosemite4: correct Mellanox multi-host property c541062fa469 ARM: dts: aspeed: greatlakes: correct Mellanox multi-host property 34bf4cdbef99 ARM: dts: aspeed: Modify I2C bus configuration d8f2250514be ARM: dts: aspeed: Disable unused ADC channels for Asrock X570D4U BMC 2901b8ca961c ARM: dts: aspeed: Modify GPIO table for Asrock X570D4U BMC 88064efed3fa ARM: dts: aspeed: yosemite4: set bus13 frequency to 100k 5ef12a481212 ARM: dts: Aspeed: Bonnell: Fix NVMe LED labels 3fc453c1db53 ARM: dts: aspeed: yosemite4: Enable ipmb device for OCP debug card bcfaf623d0d2 ARM: dts: aspeed: ahe50dc: Update lm25066 regulator name 8234174b4319 ARM: dts: aspeed: Add vendor prefixes to lm25066 compat strings ff5b5d4f8608 ARM: dts: aspeed: asrock: Use MAC address from FRU EEPROM 4cd1834171b1 ARM: dts: aspeed: system1: IBM System1 BMC board f78504173b45 dt-bindings: arm: aspeed: add IBM system1-bmc fe7af5d377d3 ARM: dts: aspeed: FSI interrupt support 868c28fb73db ARM: dts: aspeed: Harma: Modify GPIO line name 4c844ce58341 ARM: dts: aspeed: Harma: Add retimer device fa2c17701347 ARM: dts: aspeed: Harma: Revise node name 2c56352a6e8c ARM: dts: aspeed: Harma: Add ltc4286 device f3f20436ebf5 ARM: dts: aspeed: Harma: Add NIC Fru device c65f4bd47989 ARM: dts: aspeed: Harma: Revise max31790 address 7f91e0534cac ARM: dts: aspeed: Harma: Add PDB temperature 77648c84705d ARM: dts: aspeed: Harma: Add spi-gpio a3814da132d2 ARM: dts: aspeed: Harma: Add cpu power good line name a4d3dcdc6972 ARM: dts: aspeed: Harma: Remove Vuart 644d0c7be99d ARM: dts: aspeed: Harma: mapping ttyS2 to UART4. e3db91e58704 ARM: dts: aspeed: Harma: Revise SGPIO line name. fb4379aba520 ARM: dts: aspeed: minerva: add sgpio line name 0f636550db24 ARM: dts: aspeed: minerva: add gpio line name c081df13fef5 ARM: dts: aspeed: minerva: Add led-fan-fault gpio 9d8afce52cc1 ARM: dts: aspeed: minerva: add fan rpm controller cf8bbd25181f ARM: dts: aspeed: minerva: add bus labels and aliases 3c1b4cf53f8a ARM: dts: aspeed: minerva: correct the address of eeprom eb9d7ba9327b ARM: dts: aspeed: minerva: Add temperature sensor d76b93442ef4 ARM: dts: aspeed: minerva: Enable power monitor device 646c9c05f278 ARM: dts: aspeed: minerva: Change sgpio use 741d60b7c317 ARM: dts: aspeed: minerva: Modify mac3 setting 2424cc717af4 ARM: dts: aspeed: minerva: Revise the name of DTS 088aed05938b ARM: dts: aspeed: Harma: Add Meta Harma (AST2600) BMC 218a89911b36 dt-bindings: arm: aspeed: add Meta Harma board 7ffe6470af68 ARM: dts: aspeed: asrock: Add ASRock X570D4U BMC f53f1d892e04 dt-bindings: arm: aspeed: add Asrock X570D4U board 29b44948f246 ARM: dts: aspeed: Add ASRock SPC621D8HM3 BMC 28c22e1158f6 dt-bindings: arm: aspeed: document ASRock SPC621D8HM3 5b07006d0544 dt-bindings: net: snps, dwmac: remove tx-sched-sp property d641f9b08e97 riscv: dts: starfive: add Milkv Mars board device tree 0481c0695137 riscv: dts: starfive: introduce a common board dtsi for jh7110 based boards 73f68262699b riscv: dts: starfive: visionfive 2: add "disable-wp" for tfcard 07708df1edd7 riscv: dts: starfive: visionfive 2: add tf cd-gpios 69db0d9798f7 riscv: dts: starfive: visionfive 2: use cpus label for timebase freq cf6fa1279f6f riscv: dts: starfive: visionfive 2: update sound and codec dt node name 5ab1511c1599 dt-bindings: riscv: starfive: add Milkv Mars board 5965246fe186 riscv: dts: starfive: add 'cpus' label to jh7110 and jh7100 soc dtsi 5bdc176b24a8 arm64: dts: exynos: gs101: enable ufs, phy on oriole & define ufs regulator 1dfec606a1c1 arm64: dts: exynos: gs101: Add ufs and ufs-phy dt nodes 7596e4636938 arm64: dts: exynos: gs101: Add the hsi2 sysreg node 6f1e47732d9c dt-bindings: hwmon: Add infineon xdp710 driver bindings c68d8da7c295 dt-bindings: usb: samsung,exynos-dwc3: add gs101 compatible ccc8d79a51ac dt-bindings: pwm: mediatek,pwm-disp: add compatible for mt8365 SoC c3ae8f8609b7 dt-bindings: remoteproc: mediatek: Support MT8188 dual-core SCP dd64a9b5d3ba ASoC: doc: dapm: various improvements a1c502ef408b dt-bindings: power: supply: max8903: specify flt-gpios as input 758561486cca spi: dt-bindings: airoha: Add YAML schema for SNFI controller e8cc1fcce923 Merge tag 'arm-soc/for-6.10/devicetree-arm64' of https://github.com/Broadcom/stblinux into soc/dt fd27491e295c Merge tag 'arm-soc/for-6.10/devicetree' of https://github.com/Broadcom/stblinux into soc/dt c8a3fe7c83a8 Merge tag 'fpga-for-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next 518d1470b29f ASoC: dt-bindings: tegra30-i2s: convert to dt schema c31e41137854 Merge tag 'scmi-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers 6ef92eb988f4 Merge tag 'memory-controller-drv-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers ab79838ecc1a Merge tag 'qcom-drivers-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers b0cbed6b585b Merge tag 'stm32-bus-firewall-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/drivers 8cd266d248da arm64: dts: ti: k3-am625-beagleplay: Fix Ethernet PHY RESET GPIOs 98ccfd6398ba dt-bindings: adc: axi-adc: add clocks property 36809262c854 dt-bindings: iio: imu: add icm42686 inside inv_icm42600 9c909a6abc5d arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add USB-C 47c139a551cc arm64: dts: ti: k3-j784s4: Add main esm address range 093094153bf0 arm64: dts: ti: k3-j721s2: Add main esm address range 9f0082edafc1 arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci 28db01d2495d arm64: dts: ti: k3-am62-verdin: replace sleep-moci hog with regulator 8ff208c87e5b arm64: dts: ti: k3-j722s-evm: Enable UHS support for MMCSD b8d07395e608 arm64: dts: ti: k3-j784s4-main: Enable support for UHS mode 6c24472d05a2 arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode f1149a5b0e32 arm64: dts: ti: k3-am62a: Enable UHS mode support for SD cards 750a79223c4c arm64: dts: ti: k3-am65-main: Remove unused properties in sdhci nodes 15229953d1b5 arm64: dts: ti: k3-am65-main: Fix sdhci node properties 81b47c119091 arm64: dts: ti: am64-phyboard-electra: Add overlay to enable a GPIO fan 689d2e3193ee arm64: dts: ti: k3-am62a-main: Add Wave5 Video Encoder/Decoder Node a6f7715e22a2 arm64: dts: ti: k3-am69-sk: Fix UART pin type and macro type 196bfc4b149d arm64: dts: ti: k3-j784s4-evm: Fix UART pin type and macro type e29fa5eebabf arm64: dts: ti: k3-am62a: Disable USB LPM 28771bff0163 arm64: dts: ti: k3-am62p: add the USB sub-system 397d6e54c93b arm64: dts: ti: k3-am62/a: use sub-node for USB_PHY_CTRL registers 19f2147e2d4a arm64: dts: ti: k3-am62*: Add PHY2 region to USB wrapper node dc5081fa31f4 arm64: dts: ti: iot2050: Add icssg-prueth nodes for PG1 devices 5bce68cd3ed7 arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add Audio Codec 6b093f16cd8c Merge v6.9-rc6 into drm-next fcd3b733403c arm64: dts: qcom: sm8650: Fix GPU cx_mem size 0017da720656 dt-bindings: soc: google: exynos-sysreg: add dedicated hsi2 sysreg compatible 0a6165f2f813 arm64: dts: exynos: gs101-oriole: enable USB on this board 7de232618ba7 arm64: dts: exynos: gs101: add USB & USB-phy nodes 16041c95ecb1 arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller 9066b47c5392 dt-bindings: pinctrl: samsung: google,gs101-pinctrl needs a clock 5f29245d5c50 Merge branch 'for-v6.10/clk-gs101-bindings' into next/clk fff3ee6f2556 arm64: dts: exynos: gs101: enable cmu-hsi0 clock controller 168cc32bbc08 Merge branch 'for-v6.10/clk-gs101-bindings' into next/dt64 fc4c7d259d85 dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit 0a148e2d01ad Merge tag 'microchip-dt64-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt 242a9f969df3 Merge tag 'dt-cleanup-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt 764054cefbec Merge tag 'dt64-cleanup-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt 03af24450b05 Merge tag 'imx-dt64-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt cefd253be3d5 Merge tag 'imx-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt fa182fa40b43 Merge tag 'imx-bindings-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt d9807f0ca418 ASoC: Merge up fixes e8d36c696111 regulator: dt-bindings: fixed-regulator: Add a preferred node name 58e931983da2 Merge tag 'qcom-arm64-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt 4dd78879de18 Merge tag 'qcom-arm32-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt 086c3411f16b Merge tag 'sunxi-dt-for-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt 53da8c9d0e3f Merge tag 'tegra-for-6.10-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt 1acd19fd83d8 Merge tag 'tegra-for-6.10-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt 788dcee7a235 Merge tag 'tegra-for-6.10-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt d38eb9fd4c47 media: dt-bindings: media: i2c: Rename ov8856.yaml a82fcd597ba3 dt-bindings: media: Add bindings for bcm2835-unicam 2b803146783c Merge tag 'sunxi-dt-for-6.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt afa61e2abc7e Merge tag 'renesas-dts-for-v6.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt bfe91094022a Merge tag 'renesas-pinctrl-for-v6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel 1dcf8839ed11 Merge tag 'v6.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt 2d528063c0dd Merge tag 'stm32-dt-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt ff55dd2aa9f3 Merge tag 'hisi-arm64-dt-for-6.10' of https://github.com/hisilicon/linux-hisi into soc/dt 4e0f50e92cba Merge tag 'samsung-dt64-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt 4c8b8d6276c2 Merge tag 'samsung-dt-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt 50686674cb6c Merge tag 'omap-for-v6.10/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt ab3a6233162a arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usage 50c7906394c4 Merge tag 'renesas-dts-for-v6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt 2184251713ad Merge tag 'renesas-dt-bindings-for-v6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt 8c1b616ea391 dt-bindings: hwmon: adm1275: add adm1281 c3e6844640bc dt-bindings: hwmon: pmbus: adp1050: add bindings 3eb515b4f7c5 dt-bindings: hwmon: ibm,p8-occ-hwmon: move to trivial devices 92146dcf5fba dt-bindings: hwmon: stts751: convert to dtschema 84925db754f7 dt-bindings: hwmon: pwm-fan: drop text file 7b6608685581 dt-bindings: hwmon: ibmpowernv: convert to dtschema 1ab44a73ebd9 dt-bindings: hwmon: as370: convert to dtschema bc45c32fc67e dt-bindings: hwmon: max6650: convert to dtschema c2400866fc0d dt-bindings: hwmon: lm87: convert to dtschema f14761db4a7c dt-bindings: hwmon: adc128d818: convert to dtschema 5f0241b4484d ARM: dts: imx6ul-pico: Use #pwm-cells = <3> for imx27-pwm device 3a5c80f6a4b5 ARM: dts: imx6ul-kontron-bl-common: Use #pwm-cells = <3> for imx27-pwm device 894db90901de ARM: dts: imx6ul-kontron-bl-43: Use #pwm-cells = <3> for imx27-pwm device 4261e3018fb5 ARM: dts: imx6ul-isiot: Use #pwm-cells = <3> for imx27-pwm device 2b6204343342 ARM: dts: imx6ul-imx6ull-opos6uldev: Use #pwm-cells = <3> for imx27-pwm device 82341566c04e ARM: dts: imx6ul-geam: Use #pwm-cells = <3> for imx27-pwm device 8e966ce66d8c ARM: dts: imx6ul-ccimx6ulsbcpro: Use #pwm-cells = <3> for imx27-pwm device 865e89e03fae ARM: dts: imx6ul-14x14-evk: Use #pwm-cells = <3> for imx27-pwm device 3d0a1fbee307 ARM: dts: imx6sx-softing-vining-2000: Use #pwm-cells = <3> for imx27-pwm device d9d78c59fa41 ARM: dts: imx6sx-sdb: Use #pwm-cells = <3> for imx27-pwm device 1f88e558e51e ARM: dts: imx6sx-nitrogen6sx: Use #pwm-cells = <3> for imx27-pwm device 61ee876baae2 ARM: dts: imx6sll-evk: Use #pwm-cells = <3> for imx27-pwm device c6958e718629 ARM: dts: imx6sl-evk: Use #pwm-cells = <3> for imx27-pwm device e927cd402da0 ARM: dts: imx6q-var-dt6customboard: Use #pwm-cells = <3> for imx27-pwm device a91e17423db9 ARM: dts: imx6q-prti6q: Use #pwm-cells = <3> for imx27-pwm device 0fdfb7444f91 ARM: dts: imx6q-pistachio: Use #pwm-cells = <3> for imx27-pwm device de30519f0ce8 ARM: dts: imx6q-novena: Use #pwm-cells = <3> for imx27-pwm device 398e92a2b4ff ARM: dts: imx6q-kp: Use #pwm-cells = <3> for imx27-pwm device 122b61c34ac0 ARM: dts: imx6qdl-skov-cpu: Use #pwm-cells = <3> for imx27-pwm device cee66abc40b2 ARM: dts: imx6qdl-savageboard: Use #pwm-cells = <3> for imx27-pwm device 94b2d4f76971 ARM: dts: imx6qdl-sabresd: Use #pwm-cells = <3> for imx27-pwm device c8211f5a745b ARM: dts: imx6qdl-sabrelite: Use #pwm-cells = <3> for imx27-pwm device 4fc475ec0bfe ARM: dts: imx6qdl-sabreauto: Use #pwm-cells = <3> for imx27-pwm device 817d1417ba5f ARM: dts: imx6qdl-phytec-mira: Use #pwm-cells = <3> for imx27-pwm device 5b7034957cac ARM: dts: imx6qdl-nitrogen6x: Use #pwm-cells = <3> for imx27-pwm device f0374cc2f386 ARM: dts: imx6qdl-nitrogen6_som2: Use #pwm-cells = <3> for imx27-pwm device e2ba7ce78c3a ARM: dts: imx6qdl-nitrogen6_max: Use #pwm-cells = <3> for imx27-pwm device 6444e7b54264 ARM: dts: imx6qdl-nit6xlite: Use #pwm-cells = <3> for imx27-pwm device 34b05463f110 ARM: dts: imx6qdl-icore: Use #pwm-cells = <3> for imx27-pwm device b6c1a9a0e786 ARM: dts: imx6qdl-gw5904: Use #pwm-cells = <3> for imx27-pwm device 567c0237038e ARM: dts: imx6qdl-gw5903: Use #pwm-cells = <3> for imx27-pwm device 3b97532650ae ARM: dts: imx6qdl-gw560x: Use #pwm-cells = <3> for imx27-pwm device 09b7e1fce9c0 ARM: dts: imx6qdl-gw54xx: Use #pwm-cells = <3> for imx27-pwm device 9d9c6be33f54 ARM: dts: imx6qdl-gw53xx: Use #pwm-cells = <3> for imx27-pwm device 01dc8030008c ARM: dts: imx6qdl-gw52xx: Use #pwm-cells = <3> for imx27-pwm device 442e9e2cd489 ARM: dts: imx6qdl-emcon: Use #pwm-cells = <3> for imx27-pwm device 4273ffc9b390 ARM: dts: imx6qdl-cubox-i: Use #pwm-cells = <3> for imx27-pwm device 6dc80d53ff06 ARM: dts: imx6qdl-aristainetos2: Use #pwm-cells = <3> for imx27-pwm device 771488ed93f3 ARM: dts: imx6qdl-apf6dev: Use #pwm-cells = <3> for imx27-pwm devices a7a73f9e83b5 ARM: dts: imx6q-bosch-acc: Use #pwm-cells = <3> for imx27-pwm device 9b9357a17bcb ARM: dts: imx6q-ba16: Use #pwm-cells = <3> for imx27-pwm device 5bf9cc646738 ARM: dts: imx6dl-mamoj: Use #pwm-cells = <3> for imx27-pwm device f135970e648f ARM: dts: imx6dl-aristainetos_7: Use #pwm-cells = <3> for imx27-pwm device 03a4cdebe838 ARM: dts: imx6dl-aristainetos_4: Use #pwm-cells = <3> for imx27-pwm device 743acc4b1e34 ARM: dts: imx53-tqma: Use #pwm-cells = <3> for imx27-pwm devices 92ea86f237ec ARM: dts: imx53-kp: Drop redundant settings in pwm nodes 6e6f0fe28f34 ARM: dts: imx53-ppd: Use #pwm-cells = <3> for imx27-pwm device 5727c6338d4c ARM: dts: imx53-m53evk: Use #pwm-cells = <3> for imx27-pwm device f2cae0965dd3 ARM: dts: imx51-ts4800: Use #pwm-cells = <3> for imx27-pwm device 4541c38d4c60 arm64: dts: allwinner: h700: Add RG35XX-H DTS daa5943c303a arm64: dts: allwinner: h700: Add RG35XX-Plus DTS 10cc453d0430 arm64: dts: allwinner: h700: Add RG35XX 2024 DTS 722c84ed33e6 dt-bindings: arm: sunxi: document Anbernic RG35XX handheld gaming device variants e788464ef24b dt-bindings: rng: Add vmgenid support 75f2af2ca0ae dt-bindings: pwm: at91: Add sam9x7 compatible strings list 3353f9a8a5bc arm: dts: bcm2711: Describe Ethernet LEDs 3d50bf87d377 arm64: tegra: Add Tegra Security Engine DT nodes 7b08ed2620d2 arm64: tegra: Correct Tegra132 I2C alias 9627bea4c92a arm64: dts: allwinner: h616: Add NMI device node 91f842070ca8 ARM: tegra: tegra20-ac97: Replace deprecated "gpio" suffix e8b0f9515b41 dt-bindings: display: tegra: Allow dma-coherent on Tegra194 and later 491f6ad2e547 ARM: tegra: paz00: Add emc-tables for ram-code 1 5ce17d4855f4 dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM4450 compatibles c90ac68e2be2 dt-bindings: iommu: renesas,ipmmu-vmsa: add r8a779h0 support b0a13ac425b3 dt-bindings: crypto: starfive: Restore sort order e8a597329b91 dt-bindings: gpio: brcmstb: add gpio-ranges 45e5187d9fa1 Merge tag 'mediatek-drm-next-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next e1a940d29d46 ASoC: dt-bindings: fsl,ssi: Convert to YAML f2c94311aed5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 84b998c95492 dt-bindings: clock: renesas,rzg2l-cpg: Update #power-domain-cells = <1> for RZ/G3S b552f8f18bfc dt-bindings: clock: r9a08g045-cpg: Add power domain IDs 0c0d1f342539 dt-bindings: clock: r9a07g054-cpg: Add power domain IDs ae25d8155ea7 dt-bindings: clock: r9a07g044-cpg: Add power domain IDs ac3c38d1a01e dt-bindings: clock: r9a07g043-cpg: Add power domain IDs fe6a602e4ebf arm64: dts: st: correct masks for GIC PPI interrupts on stm32mp25 9e5a000a4104 arm64: dts: st: add spi3 / spi8 properties on stm32mp257f-ev1 4aeaef4d0e11 arm64: dts: st: add spi3/spi8 pins for stm32mp25 67ba1036313a arm64: dts: st: add all 8 spi nodes on stm32mp251 9c54638973a4 arm64: dts: st: add i2c2 / i2c8 properties on stm32mp257f-ev1 8b31f6abad0e arm64: dts: st: add i2c2/i2c8 pins for stm32mp25 5e4a8c073dca arm64: dts: st: add all 8 i2c nodes on stm32mp251 64999979f7da arm64: dts: st: add rcc support for STM32MP25 1669707ddf84 ARM: dts: stm32: enable display support on stm32mp135f-dk board 346b593975d0 ARM: dts: stm32: add LTDC pinctrl on STM32MP13x SoC family 24aa5bae642e ARM: dts: stm32: add LTDC support for STM32MP13x SoC family 4d6a8bd0c624 dt-bindings: display: simple: allow panel-common properties 33f5c9c9fb56 ARM: dts: stm32: add PWR regulators support on stm32mp131 d6faa3bf1bb7 media: dt-bindings: add access-controllers to STM32MP25 video codecs b16594d4ebce ARM: dts: stm32: add heartbeat led for stm32mp157c-ed1 493c81145d01 ARM: dts: stm32: move can3 node from stm32f746 to stm32f769 c17556a78124 ARM: dts: stm32: put ETZPC as an access controller for STM32MP13x boards e4e32345cbfc ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards 75b51ac3298b ARM: dts: stm32: put ETZPC as an access controller for STM32MP15x boards 2a5199568715 ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards 86502fa8c41b arm64: dts: st: add RIFSC as an access controller for STM32MP25x boards f062a015f4f5 arm64: dts: ti: k3-j784s4: Use exact ranges for FSS node 0c0e03ec224e arm64: dts: ti: k3-j721e: Use exact ranges for FSS node f00e6260851d arm64: dts: ti: k3-j7200: Use exact ranges for FSS node 2b5965048af3 arm64: dts: ti: k3-am65: Use exact ranges for FSS node 67b4c30577d2 arm64: dts: ti: k3-am65: Move SerDes mux nodes under the control node 3358adf6b793 arm64: dts: ti: k3-am65: Add full compatible to SerDes control nodes 535a3c9fbc39 arm64: dts: imx93-11x11-evk: add RTC PCF2131 support 0eb52fbf2b5b dt-bindings: dma: fsl-edma: allow 'power-domains' property d1b04584c784 dt-bindings: dma: fsl-edma: remove 'clocks' from required b0f652da2c1a dt-bindings: fsl-imx-sdma: Add I2C peripheral types ID db50dffed6e0 dt-bindings: fsl-dma: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string cc846cc8c9a3 dt-bindings: dma: Drop unused QCom hidma binding 5f63f6393d95 dt-bindings: clock: google,gs101-clock: add HSI0 clock management unit d3de8c521ca4 arm64: dts: imx93-11x11-evk: add reset gpios for ethernet PHYs 71803901715e arm64: dts: imx93-11x11-evk: add sleep pinctrl for sdhc2 e785de3e57da arm64: dts: imx93-11x11-evk: add different usdhc pinctrl for different timing usage 42b4ea4a24dc arm64: dts: imx93-11x11-evk: add sleep pinctrl for eqos and fec 3c1a4d062690 arm64: dts: imx93-11x11-evk: update resource table address b9bfb20ead6b arm64: dts: imx93: add nvmem property for eqos b2feecd51432 arm64: dts: imx93: add nvmem property for fec1 5f69da62e7ef arm64: dts: imx93: assign usdhc[1..3] root clock to 400MHz 181b3041bbb7 arm64: dts: imx93: add dma support for lpspi[1..8] 4c954fbede67 arm64: dts: imx93: add dma support for lpi2c[1..8] 175c3328f64f arm64: dts: imx93: use FSL_EDMA_RX for rx channel 313d19f58e75 arm64: dts: freescale: ls1028a: Add standard PCI device compatible strings to ENETC 1d8c51469b41 arm64: dts: freescale: ls1028a: Fix embedded PCI interrupt mapping 1f7d8fa2f7e0 arm64: dts: imx8qxp-mek: add cm40_i2c, wm8960 and sai[0,1,4,5] 15aedc871fe4 arm64: dts: imx8mp: Align both CSI2 pixel clock 4442cdcc4fc8 ARM: dts: imx6ull-tarragon: Reduce SPI clock for QCA7000 b0d57263bdf2 ARM: dts: nxp: imx6qdl: fix esai clock warning when do dtb_check 57fdf0a64275 ARM: dts: nxp: imx6sx: fix esai related warning when do dtb_check 6df4426dd76b ARM: dts: BCM5301X: Conform to DTS Coding Style on ASUS RT-AC3100 & AC88U c426fd6da616 ARM: dts: BCM5301X: Add DT for ASUS RT-AC5300 b2a89f7efb01 ARM: dts: BCM5301X: Add DT for ASUS RT-AC3200 a932bc9ff274 dt-bindings: arm: bcm: add bindings for ASUS RT-AC5300 1255f9086006 dt-bindings: arm: bcm: add bindings for ASUS RT-AC3200 31dbca206286 ARM: dts: bcm2835: Add Unicam CSI nodes 7dcc70cf239d media: dt-bindings: nxp,imx8-jpeg: Add clocks entries dbfa282670db ARM: dts: aspeed: Add vendor prefixes to lm25066 compat strings e4599b879ecc arm64: dts: cavium: thunder2-99xx: drop redundant reg-names 76ec00bedfda arm64: dts: amazon: alpine-v3: correct gic unit addresses c4f94cdc07e6 arm64: dts: amazon: alpine-v3: drop cache nodes unit addresses ebdc05f0329b arm64: dts: amazon: alpine-v3: add missing io-fabric unit addresses ad5e68116954 arm64: dts: amazon: alpine-v2: move non-MMIO node out of soc 29e19d50851c arm64: dts: amazon: alpine-v2: add missing io-fabric unit addresses ce0b227a6574 arm64: dts: apm: shadowcat: move non-MMIO node out of soc 27c326261c5b arm64: dts: apm: storm: move non-MMIO node out of soc d9a81ed4a976 arm64: dts: cavium: correct unit addresses 8c4332bb1675 arm64: dts: cavium: move non-MMIO node out of soc e9269e3c4077 arm64: dts: realtek: rtc16xx: add missing unit address to soc node 724eaba44818 arm64: dts: realtek: rtd139x: add missing unit address to soc node 52adc8d0a8c1 arm64: dts: realtek: rtd129x: add missing unit address to soc node 089cadb46086 arm64: dts: uniphier: ld20-global: drop audio codec port unit address c8128ae212de arm64: dts: uniphier: ld20-global: use generic node name for audio-codec 5cf76606fda2 arm64: dts: uniphier: ld11-global: drop audio codec port unit address 93e079a0d13a arm64: dts: uniphier: ld11-global: use generic node name for audio-codec 41365adca496 arm64: dts: sharkl3: add missing unit addresses 54ef9a80a93a arm64: dts: whale2: add missing ap-apb unit address 9791da4e0389 arm64: dts: sc9860: move GIC to soc node ce02ab2f5b45 arm64: dts: sc9860: move GPIO keys to board 92205bb23cdd arm64: dts: sc9860: add missing aon-prediv unit address 10256f562a49 Merge tag 'iio-for-6.10a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next 3d013af73b39 dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport ec09e3a30b9f dt-bindings: usb: Add bindings for multiport properties on DWC3 controller cde9be1559bf ASoC: dt-bindings: renesas: Fix R-Car Gen4 SoC-specific compatibles f6b925bcd3bc ASoC: dt-bindings: tegra20-ac97: convert to dt schema d7ddd18e6ec7 dt-bindings: usb: uhci: convert to dt schema e61b74add0c7 dt-bindings: usb: qcom,pmic-typec: update example to follow connector schema 135af74d5147 dt-bindings: clock: qcom,hfpll: Convert to YAML d91a413d181d dt-bindings: watchdog: aspeed,ast2400-wdt: Convert to DT schema 1c22fce3413a dt-bindings: irq: sun7i-nmi: Add binding for the H616 NMI controller b95bd2d7176e dt-bindings: interrupt-controller: renesas,irqc: Add r8a779g0 support 193d3b2a0a98 arm64: dts: rockchip: add dual-role usb3 hosts to rk3588 Tiger-Haikou 4843cec40923 arm64: dts: rockchip: add usb-id extcon on rk3588 tiger 56f3031edf22 arm64: dts: rockchip: fix comment for upper usb3 port b574cbafae97 arm64: dts: rockchip: fix pcie-refclk frequency on rk3588 tiger cb2b6d1d19ed arm64: dts: rockchip: correct gpio_pwrctrl1 typos on rk3588(s) boards c1af4a1c01a7 dt-bindings: display: bridge: tc358775: Add support for tc358765 2f5f0d103f6e dt-bindings: display: bridge: tc358775: Add data-lanes 98f090f0b5fe dt-bindings: display: bridge: tc358775: make stby gpio optional 064e9e5ce2f1 arm64: dts: rockchip: Correct the model names for Pine64 boards 237ad7104aec dt-bindings: arm: rockchip: Correct the descriptions for Pine64 boards d427a11542bc arm64: dts: rockchip: Add ArmSom Sige7 board 0eba211d362e dt-bindings: arm: rockchip: Add ArmSoM Sige7 c2f903162038 dt-bindings: vendor-prefixes: add ArmSoM 76a89655ae74 arm64: dts: rockchip: add PCIe3 support on rk3588-jaguar f8314a4fbc00 arm64: dts: rockchip: move uart2 pinmux to dtsi on rk3588-tiger 79943532fa1d arm64: dts: rockchip: Add USB-C Support for rk3588s-indiedroid-nova e7af62a934e8 arm64: dts: rockchip: correct the model name for Radxa ROCK 3A 82aeee87f2b1 dt-bindings: arm: rockchip: correct the model name for Radxa ROCK 3A 03003583b4be arm64: dts: rockchip: Correct the model names for Radxa ROCK 5 boards 15e69ac796bd dt-bindings: arm: rockchip: Correct the descriptions for Radxa boards 9072fb708188 ARM: dts: qcom: msm8974: Add DTS for Samsung Galaxy S5 China (kltechn) d69fe87f0860 ARM: dts: qcom: msm8974-klte-common: Pin WiFi board type 68af5e61e7c9 ARM: dts: qcom: msm8974: Split out common part of samsung-klte 594567bc46d5 dt-bindings: arm: qcom: Add Samsung Galaxy S5 China (kltechn) bbd47e34ab5f Merge 6.9-rc5 into usb-next c9ee8fc981cc Merge 6.9-rc5 into tty-next 4f761a6b1012 dt-bindings: thermal: loongson,ls2k-thermal: Fix incorrect compatible definition a553f548d1cd dt-bindings: thermal: loongson,ls2k-thermal: Add Loongson-2K0500 compatible 288af1f42e2b dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8188 57c07263aa4d dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8186 6698b27c6dea dt-bindings: thermal: amlogic: add support for A1 thermal sensor 3776c6969512 dt-bindings: thermal: convert st,stih407-thermal to DT schema bcd66b45dd34 dt-bindings: thermal: lmh: Add QCM2290 compatible ce86f3e9490e riscv: dts: sophgo: add reserved memory node for CV1800B 846b04d066ea arm64: dts: amlogic: Add Amlogic T7 reset controller 39f26adbfa16 arm64: dts: renesas: r8a779h0: Link IOMMU consumers d14870f832b7 arm64: dts: renesas: r8a779h0: Add IPMMU nodes c114bd646dce arm64: dts: renesas: r8a779h0: Add INTC-EX node 67b0516ceda5 arm64: dts: renesas: r8a779h0: Add MSIOF nodes bc619ae30078 dt-bindings: display: bridge: add sam9x75-lvds binding dca3302106bf Merge drm/drm-next into drm-misc-next 7ce6e2097034 ASoC: dt-bindings: mt2701-wm8960: Convert to dtschema da00fbc40e0f dt-bindings: kbuild: Split targets out to separate rules 69656e8d2d76 dt-bindings: kbuild: Simplify examples target patsubst 4e5b1058f5ef arm64: dts: st: Add interrupt parent to pinctrl on stm32mp251 fb49b549917e arm64: dts: st: Add exti1 and exti2 nodes on stm32mp251 484a80c84c86 ARM: dts: stm32: List exti parent interrupts on stm32mp131 05eba090e415 ARM: dts: stm32: List exti parent interrupts on stm32mp151 4d2f464d5eae dt-bindings: interrupt-controller: stm32-exti: Add irq mapping to parent e59c511bbde3 dt-bindings: display: msm: sm6350-mdss: document DP controller subnode 5065723fb8b8 dt-bindings: display: msm: dp-controller: document SM6350 compatible b9fef5367089 arm64: dts: qcom: qrb4210-rb1: add firmware-name qualifier to WiFi node 0bdead1f85d4 arm64: dts: qcom: qrb2210-rb1: add firmware-name qualifier to WiFi node b86228aea8a3 dt-bindings: clock: support i.MX95 Display Master CSR module e39d9c9fec9f dt-bindings: clock: support i.MX95 BLK CTL module b47570e09314 dt-bindings: clock: add i.MX95 clock header 8a5fb2310d54 media: dt-bindings: i2c: use absolute path to other schema 970ad453bd0b media: dt-bindings: sony,imx290: Allow props from video-interface-devices 9662a8f02c4f dt-bindings: display: panel: Add Raydium RM69380 c69d47a5e76a dt-bindings: panel-simple-dsi: add Khadas TS050 V2 panel 22deef8e4842 arm64: dts: renesas: rzg3s-smarc-som: Enable eMMC by default 623a1025d410 riscv: dts: renesas: rzfive-smarc-som: Drop deleting interrupt properties from ETH0/1 nodes 874db36b90ff arm64: dts: renesas: r9a07g043: Move interrupt-parent property to common DTSI 0e066368fa42 riscv: dts: renesas: r9a07g043f: Add IRQC node to RZ/Five SoC DTSI 050fde68cb8e arm64: dts: freescale: imx8m[mp]-verdin: Update audio card name 03a997c520c4 arm64: dts: imx8mp: Enable HDMI on TQMa8MPxL/MBa8MPxL 4e5ac2e78d9b arm64: dts: imx8ulp: add caam jr 0395ab5e9103 ARM: dts: imx6: exchange fallback and specific compatible string 7cf7d11c97e8 arm64: dts: imx8mp-msc-sm2s: Add i2c{1,6} sda-/scl-gpios c299857e7675 arm64: dts: imx8mp-msc-sm2s: correct i2c{1..6} pad drive strength 231306f6ad3a arm64: dts: imx8-ss-img: Remove JPEG clock-names f813facbaa87 arm64: dts: freescale: imx8mm-verdin-dahlia: support sleep-moci acab386ccefb arm64: dts: freescale: imx8mm-verdin: replace sleep-moci hog with regulator 63dc0e6ae76e arm64: dts: freescale: imx8mp-verdin-dahlia: support sleep-moci 9ccc8468709f arm64: dts: freescale: imx8mp-verdin: replace sleep-moci hog with regulator a9571e00d3b3 Backmerge tag 'v6.9-rc5' into drm-next df08f4f212a6 arm64: dts: imx8mn-var-som-symphony: drop redundant status from typec d5da00ac49ef arm64: dts: imx8mm-var-som-symphony: drop redundant status from typec 737b4984fa47 arm64: dts: imx8mp-debix-som-a-bmb-08: Remove 'phy-supply' from eqos 8ff9a66b6479 arm64: dts: debix-a: Disable i2c2 in base .dts 4277d554b60b arm64: dts: imx8mm-evk: Describe the OV5640 supplies ded973496d04 arm64: dts: imx8mn-evk: Describe the OV5640 supplies ddde68a91a43 arm64: dts: imx8mn-evk: Fix ADV7535 dt-schema warnings 22d0352ce7a2 arm64: dts: imx8m/qxp: Pass the tcpci compatible 1f4e0bb83c90 arm64: dts: imx8mm/n remove clock-names property from usb controller node a1e2d847e35f arm64: dts: imx93-11x11-evk: enable usb and typec nodes 2b1e53353f62 arm64: dts: imx93: add usb nodes ef3c85188e47 arm64: dts: imx8ulp-evk: enable usb nodes and add ptn5150 nodes 6e96829c4bf3 arm64: dts: imx8ulp: add usb nodes 3f9d11d6fb6d ARM: dts: imx6: remove fsl,anatop property from usb controller node 6c316ffa4077 dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible 372c4db7e6dd ARM: dts: imx27-phytec: Add USB support 635ce5bbaaed dt-bindings: arm: fsl: Add Colibri iMX8DX b445678b1931 dt-bindings: arm: fsl: remove reduntant toradex,colibri-imx8x 8488eb1462dd arm64: dts: freescale: Add Toradex Colibri iMX8DX 972adfe63fb1 arm64: dts: freescale: Add i.MX8DX dtsi ad6fdd80ee3b arm64: dts: ls1028a: sl28: split variant 3/ads2 carrier a9ce8b591785 Merge tag 'drm-misc-next-2024-04-19' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next dd3a144eda21 ASoC: PCM6240: New driver 9a99a6316892 riscv: dts: sophgo: use real clock for sdhci c840ff2e18af arm64: dts: allwinner: Add Tanix TX1 support b2e0faa8a675 dt-bindings: arm: sunxi: document Tanix TX1 name 792162cae91c arm64: dts: qcom: ipq6018: Add PCIe bridge node 3fa9637a2947 arm64: dts: qcom: ipq8074: Add PCIe bridge node efa4c08d038f arm64: dts: qcom: msm8996: Add PCIe bridge node ad5da98437f7 arm64: dts: qcom: sc8180x: Add PCIe bridge node 674f6d7f54ca arm64: dts: qcom: qcs404: Add PCIe bridge node 20e81d93a236 arm64: dts: qcom: sc7280: Add PCIe bridge node 5a5a8af96f18 arm64: dts: qcom: msm8998: Add PCIe bridge node 289c55880aee arm64: dts: qcom: sc8280xp: Add PCIe bridge node 7025014034f2 arm64: dts: qcom: sa8775p: Add PCIe bridge node 43321683cb9a arm64: dts: qcom: sm8650: Add PCIe bridge node 8f495de80b7a arm64: dts: qcom: sm8550: Add PCIe bridge node 614fb1ab653a arm64: dts: qcom: sm8450: Add PCIe bridge node d92455378183 arm64: dts: qcom: sm8350: Add PCIe bridge node 827a7e42477f arm64: dts: qcom: sm8150: Add PCIe bridge node 53242571d01a arm64: dts: qcom: sdm845: Add PCIe bridge node af9c05149646 arm64: dts: qcom: sm8250: Add PCIe bridge node e5500772de61 arm64: dts: qcom: sdm845-db845c: make pcie0_3p3v_dual always-on b3515c2998df ARM: dts: qcom: sdx55: Add PCIe bridge node cce6533a5cbd ARM: dts: qcom: apq8064: Add PCIe bridge node 2b3b05d1c9c9 ARM: dts: qcom: ipq4019: Add PCIe bridge node 63cf887a7580 ARM: dts: qcom: ipq8064: Add PCIe bridge node b4ee17574c35 arm64: dts: qcom: sm8450: Update SNPS Phy parameters for QRD platform 22648e1bee56 arm64: dts: qcom: sc8280xp: Fill in EAS properties f2bd2e49960f arm64: dts: qcom: sm8650: Add three missing fastrpc-compute-cb nodes e856db61a40f arm64: dts: qcom: sm8650-qrd: enable GPU 35f100996e20 arm64: dts: qcom: sm8650: add GPU nodes a8ead17a3d36 arm64: dts: qcom: pm6150l: add Light Pulse Generator device node 9cc74d26a17e arm64: dts: qcom: msm8916/39-samsung-a2015: Add connector for MUIC 02e733071f05 arm64: dts: qcom: sm8250-xiaomi-elish: set pm8150b_vbus regulator-min-microamp and regulator-max-microamp 6c1a75a420ef arm64: dts: qcom: sm8650: remove useless enablement of mdss_mdp 4ce5797e3436 arm64: dts: qcom: sdx75: add unit address to soc node 9258093861eb arm64: dts: qcom: sm6350: Add DisplayPort controller 90a500593abc arm64: dts: qcom: qcs6490-rb3gen2: Enable various remoteprocs bfd0381c5a70 arm64: dts: qcom: qcm6490-idp: Enable various remoteprocs de9c4e5e8b56 ASoc: dt-bindings: PCM6240: Add initial DT binding fd8694bdb0b9 spi: dt-bindings: armada-3700: convert to dtschema c78c899c96cb ASoC: dt-bindings: nau8821: Add delay control for ADC 7b3c910a7d6d arm64: dts: qcom: sc8180x-lenovo-flex-5g: add USB-C orientation GPIOs 708d770a5a70 arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: add USB-C orientation GPIOs 9e442cc8cb3c arm64: dts: qcom: sm8450-hdk: add USB-C orientation GPIO 0a661711b1ef arm64: dts: qcom: sm8350-hdk: add USB-C orientation GPIO 77c5e3ad588e dt-bindings: soc: qcom: pmic-glink: allow orientation-gpios 1aefd03e59f6 arm64: dts: qcom: qcm6490-fairphone-fp5: Add USB-C orientation GPIO 2ceae1539ae0 arm64: dts: qcom: qcm6490-idp: Name the regulators d9102d3b2e3b arm64: dts: qcom: sa8155p-adp: lower min volt for L13C regulator 8a715b91a1c7 arm64: dts: qcom: x1e80100-qcp: Add data-lanes and link-frequencies to DP3 6bd780421531 arm64: dts: qcom: x1e80100-crd: Add data-lanes and link-frequencies to DP3 ea5e16fd9a8f arm64: dts: qcom: x1e80100: Drop the link-frequencies from mdss_dp3_in 62eb2be767ab dt-bindings: iio: dac: add docs for AD9739A d03d8d312e65 dt-bindings: iio: dac: add docs for AXI DAC IP 7cba578ebc5b dt-bindings: iio: adc: Add GPADC for Allwinner H616 9c6368e9206d dt-bindings: firmware: Support SCMI pinctrl protocol b90eb90ea59b dt-bindings: display: add #sound-dai-cells property to rockchip inno hdmi e60c6ed27ba8 dt-bindings: display: add #sound-dai-cells property to rockchip rk3066 hdmi 9184fbd7f9c0 dt-bindings: display: add #sound-dai-cells property to rockchip dw hdmi 2447c9c646f9 media: dt-bindings: nxp,imx8-isi: Refuse port@1 for single pipeline models 8f23b15184a2 arm64: dts: hisilicon: hi6220: correct tsensor unit addresses c74ffcb584df arm64: dts: hisilicon: hi6220-hikey: drop unit addresses from fixed regulators ea691e292404 arm64: dts: hisilicon: hi6220-hikey: add missing port@0 reg ab6c144490e2 arm64: dts: hisilicon: hip07: correct unit addresses 46ce6c6b3ced arm64: dts: hisilicon: hip07: move non-MMIO node out of soc 0f4e57316446 arm64: dts: allwinner: h616: enable DVFS for all boards 3eab0acf4dc6 arm64: dts: allwinner: h616: Add CPU OPPs table 4451e3f41280 dt-bindings: opp: Describe H616 OPPs and opp-supported-hw 80780ee52ad0 dt-bindings: net: pse-pd: Add bindings for TPS23881 PSE controller 39f7f40b60e2 dt-bindings: net: pse-pd: Add bindings for PD692x0 PSE controller e1d12a2e6d7b dt-bindings: net: pse-pd: Add another way of describing several PSE PIs 0fab9829ac44 dt-bindings: panel: Add LG SW43408 MIPI-DSI panel ca2684c1c09a ASoC: dt-bindings: tegra20-das: Convert to schema fffcea9cfd96 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 10901064860d dt-bindings: net: wireless: ath11k: add ieee80211-freq-limit property 3b3e27060fa4 dt-bindings: iommu: Add Qualcomm TBU 7fb1e0c3b046 dt-bindings: input: qcom,pm8xxx-vib: add new SPMI vibrator module 4d9de260623d dt-bindings: rtc: convert trivial devices into dtschema 5b5dad161413 dt-bindings: rtc: stmp3xxx-rtc: convert to dtschema 5e83626c68b1 dt-bindings: rtc: pxa-rtc: convert to dtschema 2e201b1cc9a9 dt-bindings: display: simple: Document support for Innolux G121XCE-L01 f8cb949a406d dt-bindings: pinctrl: qcom,pmic-mpp: add support for PM8901 b595893b51c4 ARM: dts: BCM5301X: remove earlycon on ASUS RT-AC3100 and ASUS RT-AC88U 6dd340cd11ca ARM: dts: BCM5301X: remove duplicate compatible on ASUS RT-AC3100 & AC88U 624473a5acb2 ARM: dts: BCM5301X: provide address for SoC MACs on ASUS RT-AC3100 & AC88U 7890a8b5ff01 ARM: dts: BCM5301X: use color and function on ASUS RT-AC3100 and RT-AC88U 22b146adfde1 spi: renesas,sh-msiof: Add r8a779h0 support 7ba9de6ac529 ASoC: dt-bindings: fsl-esai: Add ref: dai-common.yaml c67e24d41931 ASoC: dt-bindings: fsl-esai: Remove 'fsl,*' from required list 7ea6e214feb6 dt-bindings: net: nxp,dwmac-imx: allow nvmem cells property 77270e20c8ca Add bridged amplifiers to cs42l43 88bd2ae39b93 dt-bindings: rtc: Add Epson RX8111 fdd26ceb0ac4 dt-bindings: remoteproc: Add Tightly Coupled Memory (TCM) bindings d1a1f0026e6f dt-bindings: timer: renesas,tmu: Add R-Car V4M support 029854351396 dt-bindings: timer: renesas,cmt: Add R-Car V4M support 66a2a0d705dd ASoC: dt-bindings: mt8186: Document audio-routing and dai-link subnode 7620d2403dce ASoC: dt-bindings: mt8192: Document audio-routing and dai-link subnode 47c9a52cce50 ASoC: dt-bindings: mt8195: Document audio-routing and dai-link subnode 3bf78bb5cc88 dt-bindings: arm: qcom,coresight-tpda: fix indentation in the example 53869a4bf3ee dt-bindings: arm: qcom,coresight-tpda: drop redundant type from ports 8c7997fd282d arm64: dts: qcom: Add SM8550 Xperia 1 V 3b5767aa3c6b arm64: dts: qcom: sm8550: Mark DWC3 as dma-coherent a9ff394b4128 arm64: dts: qcom: sm8550: Add missing DWC3 quirks 433ab5edb4df arm64: dts: qcom: sm8550: Mark APPS SMMU as dma-coherent 833ee79f0fa1 arm64: dts: qcom: sm8550: Mark QUPs and GPI dma-coherent 8bf4246f2516 dt-bindings: arm: qcom: Add Xperia 1 V 793d53285155 ASoC: dt-bindings: fsl-asoc-card: Add compatbile string for wm8904 codec 29c05c4fef59 ARM: dts: sun5i: Add PocketBook 614 Plus support 02911b69b54c dt-bindings: arm: sunxi: Add PocketBook 614 Plus c3bc81c454e7 arm64: dts: allwinner: h616: Fix I2C0 pins 9dbf17fb46ed arm64: dts: allwinner: a64: Run GPU at 432 MHz 065337b68a65 arm: dts: allwinner: drop underscore in node names 11e006da2c2b arm64: dts: allwinner: Orange Pi: delete node by phandle 142edd589c5c arm64: dts: allwinner: drop underscore in node names 42cbbd959064 arm64: dts: allwinner: Pine H64: correctly remove reg_gmac_3v3 b819040dd5fd arm64: dts: allwinner: pinephone: add multicolor LED node ccb22b1e8596 arm64: dts: allwinner: pinephone: Retain LEDs state in suspend 3ec5c145b84f dt-bindings: firmware: arm,scmi: Update examples for protocol@13 fc1542cb9848 riscv: dts: starfive: visionfive 2: Remove non-existing I2S hardware 849cce26716d riscv: dts: starfive: visionfive 2: Remove non-existing TDM hardware c8eb0c3a74ec dt-bindings: leds: Add LED_FUNCTION_FNLOCK 2e58ac425d2a dt-bindings: mtd: fixed-partition: Add binman compatibles 7260163a815f dt-bindings: mtd: fixed-partitions: Add alignment properties fe3814a394e7 arm64: dts: renesas: s4sk: Fix ethernet0 alias e23a71d01d46 mips: dts: ralink: mt7621: reorder the attributes of the root node 24b391a21bdc mips: dts: ralink: mt7621: reorder pci?_phy attributes 4ae4e7293603 mips: dts: ralink: mt7621: reorder pcie node attributes and children 3f3dfc4236a2 mips: dts: ralink: mt7621: reorder ethernet node attributes and kids bfb4c4833169 mips: dts: ralink: mt7621: reorder gic node attributes 1f0f3bc19c21 mips: dts: ralink: mt7621: reorder mmc node attributes a5e2998183bb mips: dts: ralink: mt7621: move pinctrl and sort its children 6f444a119795 mips: dts: ralink: mt7621: reorder spi0 node attributes fca30a7535b1 mips: dts: ralink: mt7621: reorder i2c node attributes a540f9b8ec03 mips: dts: ralink: mt7621: reorder gpio node attributes 0835fe77afc5 mips: dts: ralink: mt7621: reorder sysc node attributes e07a025b5975 mips: dts: ralink: mt7621: reorder mmc regulator attributes 2dcf68a0bcf7 mips: dts: ralink: mt7621: reorder cpuintc node attributes ca0c18c23fa8 mips: dts: ralink: mt7621: reorder cpu node attributes 053249b6d5ec ASoC: dt-bindings: renesas,rsnd: add missing renesas,rcar_sound-gen4 1d87f8890aa8 ASoC: dt-bindings: renesas: add R8A779H0 V4M f4d04690315a ASoC: dt-bindings: fsl-asoc-card: Document fsl,imx25-pdk-sgtl5000 55ae66772efa dt-bindings: iio: imu: add icm42688 inside inv_icm42600 fdfa8d1b35b9 dt-bindings: iio: imu: mpu6050: Improve i2c-gate disallow list 8ba514ee5b82 dt-bindings: phy: rockchip,pcie3-phy: add rockchip,rx-common-refclk-mode 440bd54eb270 arm64: dts: hisilicon: hip06: correct unit addresses 5741ae4cfabd arm64: dts: hisilicon: hip06: move non-MMIO node out of soc 5615c8589bf6 arm64: dts: hisilicon: hip05-d02: correct local-bus unit addresses 1c584edd5307 arm64: dts: hisilicon: hip05: move non-MMIO node out of soc 69456ffa148e dt-bindings: serial: fsl-linflexuart: add compatible for S32G3 671a5f693eb0 dt-bindings: PCI: ti,j721e-pci-host: Add support for J722S SoC 4f2091cdb0b3 dt-bindings: PCI: rcar-pci-host: Add missing IOMMU properties 507490f1d073 dt-bindings: PCI: ti,j721e-pci-host: Add device-id for TI's J784S4 SoC 402af187821d arm64: dts: rockchip: add lower USB3 port to rock-5b c233f1327b04 arm64: dts: rockchip: add upper USB3 port to rock-5a b8109b201486 arm64: dts: rockchip: add USB3 to rk3588-evb1 c7ed588e14f7 arm64: dts: rockchip: add USB3 DRD controllers on rk3588 5110caca9865 arm64: dts: rockchip: add USBDP phys on rk3588 f6835a60a8a2 arm64: dts: rockchip: reorder usb2phy properties for rk3588 5a3e46384924 arm64: dts: rockchip: fix usb2phy nodename for rk3588 ca27a06eb38e arm64: dts: add support for A5 based Amlogic AV400 2868f52a63b2 arm64: dts: add support for A4 based Amlogic BA400 1323400c1680 dt-bindings: serial: amlogic,meson-uart: Add compatible string for A4 951cf87f261f dt-bindings: arm: amlogic: add A5 support 4d21ea87f93a dt-bindings: arm: amlogic: add A4 support 3230ebde1f40 arm64: dts: meson: fix S4 power-controller node 42d59356df34 dt-bindings: phy: add rockchip usbdp combo phy document 2b5e4f248bf1 dt-bindings: phy: mediatek,mt7988-xfi-tphy: add new bindings f0ba52b92b91 dt-bindings: leds: leds-qcom-lpg: Add support for PMI8950 PWM 9d3514916b43 dt-bindings: leds: Add LED_FUNCTION_SPEED_* for link speed on LAN/WAN da14d6d29c69 dt-bindings: leds: Add LED_FUNCTION_MOBILE for mobile network 18a65e58e997 dt-bindings: leds: qcom-lpg: Document PM6150L compatible aff549a2c519 dt-bindings: leds: pca963x: Convert text bindings to YAML 8a42a5a7094a dt-bindings: pinctrl: qcom,pmic-gpio: Allow gpio-hog nodes 4d88755d4f02 dt-bindings: pinctrl: mediatek: mt7622: add "gpio-ranges" property 58a4d54d07ea dt-bindings: crypto: Add Tegra Security Engine 9875df0acad4 dt-bindings: clocks: stm32mp25: add description of all parents f79ff26e4bd9 arm64: dts: qcom: sc7180: Fix UFS PHY clocks 0f1da974f0c6 ASoC: dt-bindings: imx-audio-spdif: convert to YAML 969d92103dca Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 720c248f51d0 arm64: dts: rockchip: Add RTC to Khadas Edge 2 f766df51c087 arm64: dts: rockchip: Add UART9 (bluetooth) to Khadas Edge 2 8f965606dbf4 dt-bindings: usb: mtk-xhci: add compatible for MT7988 c0fe192cdc06 riscv: dts: sophgo: cv18xx: Add i2c devices 38d466fa7c5f riscv: dts: sophgo: cv18xx: Add spi devices 6f3a52a619b6 riscv: dts: sophgo: add uart clock for Sophgo CV1800 series SoC be0d967b9b51 dt-bindings: clock: loongson2: Add Loongson-2K2000 compatible d7fd32f4c1c5 dt-bindings: clock: loongson2: Add Loongson-2K0500 compatible 1b502771fcfe dt-bindings: clock: Add Loongson-2K expand clock index d43c45938c89 riscv: dts: sophgo: add clock generator for Sophgo CV1800 series SoC 54a73d7ee90b dt-bindings: clock: sophgo: Add clock controller of SG2000 series SoC 4ddda6ec89e3 Merge tag 'drm-misc-next-2024-04-10' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next 59f5b90f6022 dt-bindings: clock: airoha: add EN7581 binding af199d083c8c spi: dt-bindings: cdns,qspi-nor: make cdns,fifo-depth optional f30a682bbd33 spi: dt-bindings: cdns,qspi-nor: add mobileye,eyeq5-ospi compatible 37f288f24b0c spi: dt-bindings: cdns,qspi-nor: sort compatibles alphabetically 15d4829cc09c media: dt-bindings: ovti,ov2680: Document link-frequencies 44205d76c574 media: dt-bindings: ovti,ov2680: Fix the power supply names ea8981faa277 arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper 5a1cbb4c0781 arm64: meson: khadas-vim3l: add TS050 DSI panel overlay 33dcd812c5a2 arm64: meson: g12-common: add the MIPI DSI nodes ac04088b017d dt-bindings: arm: amlogic: Document the MNT Reform 2 CM4 adapter with a BPI-CM4 Module dcee52585ed7 arm64: dts: rockchip: Add SFC to Khadas Edge 2 e7a0bbef632c arm64: dts: rockchip: Add saradc and adc buttons to Khadas Edge 2 and enable tsadc 92bc0044a770 arm64: dts: rockchip: Add ir receiver and leds to Khadas Edge 2 0fb94e0aab08 arm64: dts: rockchip: USB2, USB3 Host, PCIe2 to Khadas Edge 2 682be859d514 arm64: dts: rockchip: Add TF card to Khadas Edge 2 5fcf64705741 arm64: dts: rockchip: Add PMIC to Khadas Edge 2 7251ac880143 arm64: dts: rockchip: Add cpu regulators and vcc5v0_sys to Khadas Edge 2 e5703403d444 arm64: dts: rockchip: Add GameForce Chi f2f6ff697daf dt-bindings: arm: rockchip: Add GameForce Chi 9a13e1d1b045 arm64: dts: rockchip: Correct model name for Powkiddy RK3566 Devices 960030a2a423 arm64: dts: rockchip: Add chasis-type for Powkiddy rk3566 devices 2c8eed296597 arm64: dts: rockchip: Correct model name for Anbernic RGxx3 Devices 1e85e8b5fdd1 arm64: dts: rockchip: Add optional node for chasis-type on Anbernic rgxx3 f2045fdbf661 arm64: dts: rockchip: Add additional properties for WiFi on Anbernic rgxx3 7b7e52f7abec ARM: dts: ti: omap: minor whitespace cleanup b2fa1da44ce6 ARM: dts: dra7: Use clksel binding for CTRL_CORE_SMA_SW_0 26f6b88d1c9c ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_USB bc435f2521cf ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_PER caea03c338a4 ARM: dts: dra7: Use clksel binding for CM_CLKSEL_ABE_PLL_SYS b7ba991cfdff ARM: dts: dra7: Use clksel binding for CM_CLKSEL_CORE b8006e1af631 ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_EVE fb6f236fa294 ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_GMAC 4d8ea002f614 ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_DRR 6d2b77fb6552 ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_GPU abc35a440788 ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_IVA bfcc3d449bb0 ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_DSP 308034a287af ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_CORE 428865b1e3c5 dt-bindings: reset: Define reset id used for HDMI Receiver c826f12bdc1b dt-bindings: clock: rockchip: add USB480M_PHY mux ac4fa51b0cf0 arm64: dts: rockchip: add Forlinx OK3588-C 6574fa6fb27f arm64: dts: rockchip: add Forlinx FET3588-C 6f20b7acc1dd dt-bindings: arm: rockchip: add Forlinx FET3588-C c4a169d1a625 arm64: dts: rockchip: add Protonic MECSBC device-tree a93d3a42ff73 dt-bindings: arm: rockchip: Add Protonic MECSBC board bbf7c16f2f12 arm64: dts: rockchip: Fix ordering of nodes on rk3588s 7479504631b5 arm64: dts: ti: k3-j722s-evm: Enable eMMC support c0c36b4c066f arm64: dts: ti: k3-{am62p,j722s}: Disable ethernet by default 467ac7adf4a7 arm64: dts: ti: k3-am642-phyboard-electra-rdk: Increase CAN max bitrate 3f507980dba5 arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Increase CAN max bitrate f1fcbddf5d12 arm64: dts: ti: k3-am625-verdin: add PCIe reset gpio hog e08660f3cd03 arm64: dts: ti: verdin-am62: mallow: fix GPIOs pinctrl 7f53b6864a72 arm64: dts: ti: k3-j784s4: Remove UART baud rate selection edfda3254cd2 arm64: dts: ti: k3-j721s2: Remove UART baud rate selection 6e3f0965c6f9 arm64: dts: ti: k3-j721e: Remove UART baud rate selection da60eaaca57a arm64: dts: ti: k3-j7200: Remove UART baud rate selection 05c6b5e8d050 arm64: dts: ti: k3-am64: Remove UART baud rate selection c77a507ba6c8 arm64: dts: ti: k3-am65: Remove UART baud rate selection cbd99ec0ded5 arm64: dts: ti: k3-am62-lp-sk: Remove tps65219 power-button e4161af885fa arm64: dts: ti: k3-am625-beagleplay: Use mmc-pwrseq for wl18xx enable ca4dbece3a24 arm64: dts: ti: verdin-am62: use SD1 CD as GPIO dc34c139bc92 arm64: dts: ti: verdin-am62: Set memory size to 2gb 7dc3b6bf42eb arm64: dts: ti: verdin-am62: dahlia: fix audio clock 7ca6e3df2bee arm64: dts: ti: k3-am62p5-sk: minor whitespace cleanup eab9ad4caead dt-bindings: arm: keystone: Remove ti,system-reboot-controller property b6c265f5abae ARM: dts: ti: keystone: k2g: Remove ti,system-reboot-controller property 02d2c9f2c78b ASoC: dt-bindings: davinci-mcbsp: Add the 'ti,T1-framing-{rx/tx}' flags a6d98f230b5f ASoC: dt-bindings: davinci-mcbsp: Add optional clock 384c2199a306 ASoC: dt-bindings: davinci-mcbsp: convert McBSP bindings to yaml schema 806eefcc02c3 dt-bindings: usb: hx3: Remove unneeded dr_mode 044e76ba8b8f dt-bindings: usb: Document the Microchip USB2514 hub a49e9178a25e ARM: dts: qcom: msm8974-sony-shinano: Enable vibrator ee7b6792f91d dt-bindings: serial: actions,owl-uart: convert to dtschema 176615d68b88 dt-bindings: serial: renesas,scif: Document r8a779h0 bindings 47316d6bba31 dt-bindings: net: rockchip-dwmac: use rgmii-id in example 293b58a3ce33 dt-bindings: net: Add support for AM65x SR1.0 in ICSSG 160476e49bd1 arm64: dts: renesas: rzg3s-smarc-som: Fix Ethernet aliases 11942cf0a649 Add support for QCM6490 and QCS6490 3e98916b42d5 arm64: dts: microchip: sparx5_pcb135: drop duplicated NOR flash 0cb64a6bd6df arm64: dts: microchip: sparx5_pcb134: drop duplicated NOR flash 5d7bc7bf7e93 arm64: dts: microchip: sparx5_pcb135: drop LED unit addresses 96af4c5f9543 arm64: dts: microchip: sparx5_pcb134: drop LED unit addresses 5cb4acc257b1 arm64: dts: microchip: sparx5_pcb135: align I2C mux node name with bindings 745050595c9d arm64: dts: microchip: sparx5_pcb134: align I2C mux node name with bindings 0bd7966aaaea arm64: dts: microchip: sparx5_pcb135: add missing I2C mux unit addresses 4c1d314d61f6 arm64: dts: microchip: sparx5_pcb134: add missing I2C mux unit addresses bed9ce9bfe43 arm64: dts: microchip: sparx5: correct serdes unit address b72c3e846fca arm64: dts: microchip: sparx5: fix mdio reg c540b207970e Merge tag 'phy_dp_modes_6.10' into msm-next-lumag 0f5349678133 media: dt-bindings: media: camss: Add qcom,sc8280xp-camss binding 2b2d6b84ff76 ASoC: dt-bindings: ti,pcm1681: Convert to dtschema 11334704e03b ASoC: dt-bindings: qcom,sm8250: Add QCM6490 snd QCS6490 sound card 6c41e473a90c arm64: dts: renesas: r8a779h0: Add TMU nodes e98c56d03d81 arm64: dts: renesas: r8a779h0: Add CMT nodes 4198120e44b0 arm64: dts: renesas: gray-hawk-single: Enable nfsroot 1dd5977e6963 ARM: dts: renesas: r9a06g032: Remove duplicate interrupt-parent 8ac906853ada dt-bindings: display: bridge: it6505: Add #sound-dai-cells b6fe7929eaee arm64: dts: hi3798cv200: add cache info 8c7387ddd437 arm64: dts: hi3798cv200: add GICH, GICV register space and irq 8052d25f7a1e arm64: dts: hi3798cv200: fix the size of GICR 653b19c3d57f ARM: dts: qcom: ipq4019: add QCA8075 PHY Package nodes 8b6be7608248 ARM: dts: qcom: Add support for Motorola Moto G (2013) db7e98d446e0 dt-bindings: arm: qcom: Add Motorola Moto G (2013) 96445ff22684 ARM: dts: qcom: msm8974: Add empty chosen node 05d778412f76 ARM: dts: qcom: msm8974: Add @0 to memory node name c9d605588473 Merge tag 'drm-misc-next-2024-04-05' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next fd537281fdba dt-bindings: dma: fsl-edma: add fsl,imx8ulp-edma compatible string cce5941e9ba4 dt-bindings: dma: snps,dw-axi-dmac: Add JH8100 support 738a3b006c67 dt-bindings: dma: snps,dma-spear1340: Fix data{-,_}width schema c3af3bbb63b1 dt-bindings: iio: temperature: ltc2983: document power supply 53d5f9f34812 dt-bindings: iio: accel: adxl345: Add spi-3wire e5fa7e7f2c22 dt-bindings: phy: samsung,ufs-phy: Add dedicated gs101-ufs-phy compatible e64d19cedd58 dt-bindings: phy: qmp-ufs: Fix PHY clocks for SC7180 a438f4ab2395 dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: document PHY AUX clock on SM8[456]50 SoCs 938969719441 dt-bindings: bus: document ETZPC a8c96305fde1 dt-bindings: bus: document RIFSC a541c76dbadb dt-bindings: treewide: add access-controllers description df2238fe396f dt-bindings: document generic access controllers a95213693fbc dt-bindings: net: wireless: ath10k: describe firmware-name property 4c7df22d3811 dt-bindings: crypto: ti,omap-sham: Convert to dtschema 865b2895e10f Merge tag 'drm-misc-next-2024-03-28' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next cb0a8e76adc4 dt-bindings: net: starfive,jh7110-dwmac: Add StarFive JH8100 support 42e2e37be646 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net a8384c80c193 arm64: dts: qcom: qcs6490-rb3gen2: Enable UFS c793db1a5a20 arm64: dts: qcom: sm8150-hdk: enable WiFI support 2ab678b8aee2 arm64: dts: qcom: msm8916-samsung-fortuna: Add PWM backlight 746bfcc05f14 arm64: dts: qcom: msm8916-samsung-fortuna: Add touchscreen 01cd48bf86da ARM: dts: bcm2711-rpi-4-b: Add CAM1 regulator 77679e1b04aa ARM: dts: bcm2711-rpi-cm4-io: Add RTC on I2C0 9ed20c8d8b4e ARM: dts: bcm2711-rpi: Add pinctrl-based multiplexing for I2C0 a22f4cef7a0e ARM: dts: bcm2835-rpi: Move duplicate firmware-clocks to bcm2835-rpi.dtsi dbab66efd1fe ARM: dts: bcm283x: Drop unneeded properties in the bcm2835-firmware node a25103cac601 dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add gpio child node 278bc7c104d6 Merge tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next b22ae3aceedc arm64: dts: qcom: qcs6490-rb3gen2: Enable USB Type-C display dc9514f67bb8 arm64: dts: qcom: qcs6490-rb3gen2: Introduce USB redriver 182a42f881be arm64: dts: qcom: qcs6490-rb3gen2: Enable adsp and cdsp 551b82528068 arm64: dts: qcom: qcs6490-rb3gen2: Add DP output 62f03e427f89 arm64: dts: qcom: sc7280: Enable MDP turbo mode b61e56afe560 arm64: dts: qcom: msm8998-yoshino: Enable RGB led 3681c0ef248f arm64: dts: qcom: msm8998-yoshino: fix volume-up key dedf405d5ac3 arm64: dts: qcom: sdm630-nile: add pinctrl for camera key 10dbe401f578 dt-bindings: arm: qcom: Add Sony Xperia Z3 07d64e367b35 arm64: dts: qcom: apq8016-sbc: correct GPIO LEDs node names bf07777c8527 arm64: dts: qcom: sm8650: fix usb interrupts properties 95dc0313a7c7 arm64: dts: qcom: msm8916: drop dtbTool-specific compatibles 35284c1fbbda dt-bindings: arm: qcom: drop dtbTool-specific compatibles 7a245b4e6ff3 arm64: dts: qcom: sc7280: Add inline crypto engine 5093b0473559 arm64: dts: qcom: ipq8074: Remove unused gpio from QPIC pins a3e2ba92004a arm64: dts: qcom: sm8350: Add interconnects to UFS 478e894db4db ARM: dts: n900: set charge current limit to 950mA 7718b663820e ARM: dts: qcom: Add Sony Xperia Z3 smartphone 6e0176b32c37 ARM: dts: qcom: msm8974-sony-castor: Split into shinano-common a9a358e1a84c arm64: dts: qcom: sc7180: Disable DCC node by default 0242960a306e arm64: dts: qcom: sc7180: Disable pmic pinctrl node on Trogdor 4f095cae545b dt-bindings: net: snps,dwmac: Align 'snps,priority' type definition 3ab6c524a275 arm64: dts: imx8dxl-evk: add lpuart1 and cm40 uart 55a66f541f3d arm64: dts: imx8dxl: update cm40 irq number information 4240cfffe385 arm64: dts: imx8dxl: add lpuart device in cm40 subsystem b178fe955580 arm64: dts: imx8: add cm40 subsystem dtsi 7951b18254cc arm64: dts: imx8m*-venice-gw7: Fix TPM schema violations cce04e7de644 ARM: dts: imx6sx-nitrogen6sx: drop incorrect cpu-dai property 0ee2adbc8d13 ARM: dts: imx6qdl-udoo: Enable USB host 596dae841e87 dt-bindings: net: renesas,ethertsn: Create child-node for MDIO bus b884b5a5c311 arm64: dts: freescale: Add device tree for Emcraft Systems NavQ+ Kit e0ca88f352a1 dt-bindings: arm: Add Emcraft Systems i.MX8M Plus NavQ+ Kit 9e173e8dfff5 dt-bindings: vendor-prefixes: Add Emcraft Systems a32d91fda032 arm64: dts: imx8mp-venice-gw73xx: add mac addr for eth1 8655adfd5e96 arm64: dts: imx8mp-venice-gw72xx: add mac addr for eth1 f0a4a8e9c61c arm64: dts: imx8qxp: add asrc[0,1], esai0, spdif0 and sai[4,5] 0bc3cb99ca4f arm64: dts: imx8: fix audio lpcg index 9802e7b606b0 arm64: dts: lx2160a: add pinmux and i2c gpio to support bus recovery a2e4ced9999e arm64: dts: broadcom: bcmbca: bcm4908: set brcm,wp-not-connected ea816d0833c2 ASoC: dt-bindings: fsl-asoc-card: convert to YAML 78eb8a927ea9 ARM: dts: qcom: msm8916: idle-state compatible require the generic idle-state af397addefe6 ARM: dts: qcom: include cpu in idle-state node names f94dfb17f9fb arm64: dts: qcom: sc8180x: add dp_p1 register blocks to DP nodes 3a9af9495213 arm64: dts: qcom: sc8180x: Drop flags for mdss irqs ee838a6c5dcc arm64: dts: qcom: sc8180x: drop legacy property #stream-id-cells c10c1ac0e013 arm64: dts: S32G3: Introduce device tree for S32G-VNP-RDB3 6eeadc4c7a09 dt-bindings: arm: fsl: add NXP S32G3 board 420e1d4db0ac arm64: dts: sprd: minor whitespace cleanup afbe017e1c78 arm64: dts: marvell: cn9130-crb: drop unneeded "status" 27c60f14e2ce arm64: dts: marvell: cn9130-crb: drop wrong unit-addresses 0911a225def4 arm64: dts: marvell: cn9130-db: drop wrong unit-addresses 5e5508e3986e arm64: dts: marvell: cn9131-db: drop unneeded flash address/size-cells cb4ed54644d6 arm64: dts: marvell: cn9130-db: drop unneeded flash address/size-cells 280b88b82731 arm64: dts: marvell: ap80x: fix IOMMU unit address f9977dce8137 dt-bindings: mmc: fsl-imx-esdhc: add NXP S32G3 support 3719bc71e829 arm64: dts: freescale: verdin-imx8mp: enable Verdin I2C_3_HDMI interface 1af7cdf75167 arm64: dts: renesas: gray-hawk-single: Add second debug serial port 7788ca0900fc arm64: dts: renesas: r8a779h0: Add SCIF nodes d2623c8e3be6 arm64: dts: renesas: r8a779h0: Add remaining HSCIF nodes cded804626dc Merge drm/drm-next into drm-misc-next 6eaa264b03cf dt-bindings: ata: ahci-da850: Convert to dtschema 88d79ce3a5e5 ARM: dts: imx7s: Add snvs-poweroff support 4c997ef805f7 arm64: dts: imx93-11x11-evk: add pca9451a support 888dc0cbc2df arm64: dts: imx8mp: Describe CSI2 GPIO expander on i.MX8MP DHCOM PDK3 board d473ff20ac00 ARM: dts: imx6qdl: Remove LCD.CONTRAST pinctrl from muxing 369c40d7733d ARM: dts: imx6qdl: mba6: Add missing vdd-supply for on-board USB hub f4dead7a191d dt-bindings: crypto: ice: Document sc7280 inline crypto engine 56dbefd49c8f dt-bindings: crypto: starfive: Add jh8100 support 472dae4a9de8 arm64: dts: rockchip: Add enable-strobe-pulldown to emmc phy on ROCK 4C+ c858fbc533a6 arm64: dts: rockchip: Add enable-strobe-pulldown to emmc phy on ROCK Pi 4 fe10e00484db arm64: dts: rockchip: Enable gpu on Cool Pi 4B 498665cfe799 arm64: dts: rockchip: Enable gpu on Cool Pi CM5 f5221484d5fc dt-bindings: display: mediatek: gamma: Add support for MT8188 e978e9a88df8 dt-bindings: display: mediatek: gamma: Change MT8195 to single enum group 8c20afe51c9b arm64: dts: imx8mp-venice-gw74xx: add ADC rail for VDD_1P0 2327517eda87 dt-bindings: fpga: xlnx,fpga-selectmap: add DT schema afb6facb38e1 arm64: dts: fsl-lx2162a-clearfog: add alias for i2c bus iic6 0de33c4d5d36 arm64: dts: fsl-lx2162a-som: add description for rtc 4d951acac66b arm64: dts: imx8mp-venice-gw74xx-imx219.dtso: fix dt warning 8e39502da89f dt-bindings: net: dwmac: Document STM32 property st,ext-phyclk 0a7a04f0f21f arm64: dts: qcom: pm6150: correct Type-C compatible 040fb0d942d5 dt-bindings: net: airoha,en8811h: Add en8811h ea44916fae41 dt-bindings: phy: Add QMP UFS PHY comptible for SM8475 ab4139c78dfc dt-bindings: display: Add GameForce Chi Panel f1fac26a6eb1 dt-bindings: vendor-prefix: Add prefix for GameForce f45b10058045 dt-bindings: rtc: nxp,lpc1788-rtc: convert to dtschema 80435727b218 dt-bindings: rtc: digicolor-rtc: move to trivial-rtc 3a5cc7be0c7b dt-bindings: rtc: alphascale,asm9260-rtc: convert to dtschema 93c7f99067be dt-bindings: rtc: armada-380-rtc: convert to dtschema c94bf886da99 dt-bindings: gpio: mpfs: allow gpio-line-names c8baf5586aad dt-bindings: gpio: mpfs: add coreGPIO support edc3a8d8ba1f arm64: dts: mba8mx: Simplify DSI connection 41c630a79684 arm64: dts: imx8mp: Add empty DSI output endpoint a9335ab9220f arm64: dts: imx8mq: Add empty DSI output endpoint 586e5a25a66f arm64: dts: imx8mn: Add empty DSI output endpoint d3dd47002ba3 arm64: dts: imx8mm: Add empty DSI output endpoint b0a66bbba940 dt-bindings: arm: fsl: Add Seeed studio NPi based boards 7749c950e2bc ARM: dts: imx6ull: add seeed studio NPi dev board 7943ba91b906 arm64: dts: imx8mp-evk: Add PDM micphone sound card support 06a171a12071 arm64: dts: imx8mp-evk: Add HDMI audio sound card support 2613e0628be4 arm64: dts: imx8mp: Add AUD2HTX device node dcea262c34c5 arm64: dts: imx8mp: add HDMI display pipeline 0798e51bdfef arm64: dts: imx8mp: add HDMI irqsteer 5589301efbf2 arm64: dts: imx8mp: add HDMI power-domains 9625814a32d8 arm64: dts: imx8qm-mek: add flexspi0 support dddebc9a4ac6 arm64: dts: imx8qm-mek: add lpspi2 support 4930bc1ea48d arm64: dts: imx8qm-mek: add adc0 support 8eacd31e7a6a ASoC: nau8325: Modify driver code and dtschema. f1ad0b85186a dt-bindings: net: renesas,etheravb: Add optional MDIO bus node a5a3c74a517b dt-bindings: phy: qcom-edp: Add X1E80100 PHY compatibles 1543b9407d26 dt-bindings: phy: qcom,snps-eusb2-repeater: Add compatible for SMB2360 dab9bf513c3c dt-bindings: phy: add binding for the i.MX8MP HDMI PHY 4e40c99fdc79 ASoC: dt-bindings: fsl-sai: allow only one dma-names 5b46a81c6968 ASoC: dt-bindings: fsl,imx-asrc: update max interrupt numbers 445e331ff3bf ASoC: dt-bindings: fsl,imx-asrc/spdif: Add power-domains property 3b1042cca37a ASoC: dt-bindings: Added schema for "nuvoton,nau8325" 51ee560e525e Merge branch 'drivers-for-6.10' onto 'v6.9-rc1' a35fffea6e63 Merge branch 'arm32-for-6.10' onto 'v6.9-rc1' d7a604efcfff Merge branch 'arm64-for-6.10' onto 'v6.9-rc1' 327ae5bf1f59 ARM: dts: imx: Add UNI-T UTi260B thermal camera board 306baafa6a09 dt-bindings: iio: dac: ti,dac5571: Add DAC081C081 support 3b48c1d3c266 dt-bindings: iio: health: maxim,max30102: add max30101 8e51b5f81bbc regulator: Merge axp20x changes 92b923457899 arm64: dts: imx93: drop the 4th interrupt for ADC 988c0a839304 arm64: dts: exynos: gs101: define all PERIC USI nodes 8f2d90d346a3 arm64: dts: exynos: gs101: join lines close to 80 chars f9cf983ea270 arm64: dts: exynos: gs101: move pinctrl-* properties after clocks 45b6f1d37e46 arm64: dts: exynos: gs101: move serial_0 pinctrl-0/names to dtsi a44ccb984946 arm64: dts: exynos: gs101: reorder pinctrl-* properties 1b8507673dc6 dt-bindings: mfd: x-powers,axp152: Document AXP717 38fcf9ba7bee dt-bindings: pinctrl: qcom,pmic-gpio: Add PMIH0108 and PMD8028 support 0024b304ddf8 dt-bindings: pinctrl: qcom,pmic-gpio: Add PMXR2230 and PM6450 support d7efce546cb5 dt-bindings: pinctrl: qcom: update functions to match with driver 9148be037372 ARM: dts: imx6: fix IRQ config of RC5T619 16507be93058 ARM: dts: imx6sl: tolino-shine2hd: fix IRQ config of touchscreen d6440887039f arm64: dts: s32g: add uSDHC node 6aa1628f3dc5 arm64: dts: s32g: add SCMI firmware node 27350b241eaf arm64: dts: rockchip: enable gpu on rk3588-tiger b71ce0df337d arm64: dts: rockchip: enable gpu on rk3588-jaguar 496e9d7ae24e arm64: dts: rockchip: Enable the GPU on quartzpro64 2ed4a6a8bc1e arm64: dts: rockchip: Enable GPU on rk3588-evb1 3bb62f4be1c6 arm64: dts: rockchip: Enable GPU on rk3588-rock5b 3cd15354ea0c arm64: dts: rockchip: Add rk3588 GPU node b3e4bfc4243f riscv: dts: sophgo: add sdcard support for milkv duo 5f3996b7ea4d ASoC: dt-bindings: xmos,xvf3500: add XMOS XVF3500 voice processor 929e424ec8a3 dt-bindings: usb: ci-hdrc-usb2-imx: add compatible and clock-names restriction for imx93 79799e37204e dt-bindings: usb: ci-hdrc-usb2-imx: add restrictions for reg, interrupts, clock and clock-names properties 81199deccd71 dt-bindings: usb: chipidea,usb2-imx: move imx parts to dedicated schema f5036776ca4c arm64: dts: renesas: r9a07g0{43,44,54}: Update RZ/G2L family compatible d082f610f125 dt-bindings: usb: renesas,usbhs: Document RZ/G2L family compatible df34e7029805 dt-bindings: usb: dwc2: Add support for Sophgo CV18XX/SG200X series SoC afe511c842cf riscv: dts: starfive: Remove PMIC interrupt info for Visionfive 2 board 62bda7500065 arm64: dts: rockchip: add wolfvision pf5 io expander board 2a4fc9a444b8 arm64: dts: rockchip: add wolfvision pf5 mainboard 6647f171f526 dt-bindings: arm: rockchip: add wolfvision pf5 mainboard d47821a0a35a dt-bindings: add wolfvision vendor prefix 2a0ec4275f4e arm64: dts: rockchip: add the internal audio codec on rk3308 89bd9d5e4595 arm64: dts: rockchip: add i2s_8ch_2 and i2s_8ch_3 to rk3308 abf445165722 ASoC: dt-bindings: Add Rockchip RK3308 internal audio codec d36a3550564f dt-bindings: usb: qcom,pmic-typec: Add support for the PM7250B PMIC 2bf3077e9cbf ARM: dts: exynos4212-tab3: limit usable memory range 7b222b83561f dt-bindings: clock: samsung,s3c6400-clock: convert to DT Schema 789cf6e0effe arm64: dts: exynos850: Add CPU clocks b55ecc9e7140 dt-bindings: arm: renesas: Document Renesas RZ/V2H(P) System Controller 9f361e51112e dt-bindings: soc: renesas: Document Renesas RZ/V2H(P) SoC variants 5719a653a110 dt-bindings: clock: r9a07g043-cpg: Annotate RZ/G2UL-only core clocks 7d45be7e768a ARM: dts: renesas: rcar-gen2: Add TMU nodes dbc57bd145b3 ARM: dts: renesas: rzg1: Add TMU nodes c3d60a152ae8 ARM: dts: renesas: r8a73a4: Add TMU nodes 2e4c1a66fafa ARM: dts: renesas: r7s72100: Add interrupt-names to SCIF nodes b4be2647b4e8 arm64: dts: renesas: r8a779h0: Add thermal nodes 345aee5488c1 arm64: dts: renesas: rzg2ul-smarc: Enable PMIC and built-in RTC, GPIO and ONKEY 425305f138c3 arm64: dts: renesas: eagle: Add capture overlay for Function expansion board 188c483e94e5 arm64: dts: amd: use capital "OR" for multiple licenses in SPDX 4dab93ec6c61 dt-bindings: display: atmel,lcdc: convert to dtschema 7463d00b8f15 dt-bindings: display: samsung,exynos5-dp: convert to DT Schema 9b0c1b5a1716 ASoC: dt-bindings: wm8974: Convert to dtschema 1c025f7d15ee dt-bindings: iio: humidity: hdc3020: add reset-gpios be159891a4ff dt-bindings: iio: adc: add ad7944 ADCs f6aa2ab198a4 dt-bindings: adc: ad7173: add support for additional models 5a639055d658 dt-bindings: iio: light: Avago APDS9306 ee5a13477d19 dt-bindings: iio: light: adps9300: Update interrupt definitions 691301ccf359 dt-bindings: iio: light: adps9300: Add missing vdd-supply 571d2039cd1c dt-bindings: iio: light: Merge APDS9300 and APDS9960 schemas 7bead03d0aba dt-bindings: adc: add AD7173 d6e93a75ded2 dt-bindings: memory-controllers: add Samsung S5Pv210 SoC DMC 55da87105117 ASoC: dt-bindings: fsl-esai: Convert fsl,esai.txt to yaml eff45c6d35c4 dt-bindings: interrupt-controller: Add RISC-V advanced PLIC 69c7a13d4212 dt-bindings: interrupt-controller: Add RISC-V incoming MSI controller 68d4ea2b8cd9 arm64: dts: juno: fix thermal zone node names 434ab11df259 arm64: dts: qcom: acer-aspire1: Add embedded controller 0797ae7b740c add pmic pca9451a support 54343f31f307 dt-bindings: platform: Add Acer Aspire 1 EC 4c81dc2d23b6 ASoC: dt-bindings: wm8776: Convert to dtschema 2b51560a8ea7 ASoC: dt-bindings: fsl-audmix: Convert fsl,audmix.txt to yaml 5490b8fbf354 ARM: dts: samsung: s5pv210: specify the SPI FIFO depth 1c900dc6bb0b arm64: dts: exynosautov9: specify the SPI FIFO depth e8db30df09da arm64: dts: exynos5433: specify the SPI FIFO depth 6a732879ab41 ARM: dts: samsung: exynos5420: specify the SPI FIFO depth 0c2483409c87 ARM: dts: samsung: exynos5250: specify the SPI FIFO depth 4c973cc8efc9 ARM: dts: samsung: exynos4: specify the SPI FIFO depth 327544b79bca ARM: dts: samsung: exynos3250: specify the SPI FIFO depth 1b9ae7d233ad ARM: dts: samsung: s5pv210: correct onenand size-cells 4a9e7d085593 ARM: dts: samsung: s5pv210: align onenand node name with bindings 7d94a29a5e01 ARM: dts: samsung: exynos5800-peach-pi: switch to undeprecated DP HPD GPIOs a2945eda660b ARM: dts: samsung: smdk4412: align keypad node names with dtschema 83cece56e84a ARM: dts: samsung: smdk4412: fix keypad no-autorepeat 29ca51c6ed42 ARM: dts: samsung: exynos4412-origen: fix keypad no-autorepeat ef68e20c1971 ARM: dts: samsung: smdkv310: fix keypad no-autorepeat 6c72c6cfd3b0 dt-bindings: pinctrl: samsung: drop unused header with register constants 3582d8d1b12b dt-bindings: display: sony, td4353-jdi: allow width-mm and height-mm aa41927d40d5 dt-bindings: display: novatek, nt36523: define ports d0a5ed63a9b4 dt-bindings: display: novatek, nt35950: define ports b18825292b5e dt-bindings: display: panel: add common dual-link schema b0119d5c5ded dt-bindings: mtd: Add Samsung S5Pv210 OneNAND a50db9557152 dt-bindings: ata: imx-pata: Convert to dtschema c60378219a91 dt-bindings: regulator: qcom,usb-vbus-regulator: Add PM7250B compatible 3c442a288b7a regulator: dt-bindings: pca9450: add pca9451a support 0eff9a5ea493 arm64: dts: rockchip: Add cache information to the SoC dtsi for RK356x ae73daab1bff arm64: dts: rockchip: Add cache information to the SoC dtsi for RK3328 61c45b58ad54 dt-bindings: display: simple: Add POWERTIP PH128800T-006-ZHC01 panel abe40fd3b82a dt-bindings: ili9881c: Add Startek KD050HDFIA020-C020A support 305c9423fbea arm64: dts: qcom: qcm6490-idp: enable PMIC Volume and Power buttons f642104215e7 ARM: dts: qcom: msm8974pro-castor: Rename wifi node name bc29c79df022 ARM: dts: qcom: msm8974pro-castor: Add debounce-interval for keys de408637e1e8 ARM: dts: qcom: msm8974pro-castor: Remove camera button definitions 0a68603019c1 ARM: dts: qcom: msm8974pro-castor: Add mmc aliases 5974cacdc88e ARM: dts: qcom: msm8974pro-castor: Clean up formatting d7995795b4c6 arm64: dts: qcom: sm8650: Add missing reserved memory for chipinfo 0cc1a4157b71 arm64: dts: qcom: qrb2210-rb1: enable USB-C port handling f2e5ede0f26a arm64: dts: qcom: ipq8074: Add QUP UART6 node 337090a813d8 arm64: dts: qcom: x1e80100-qcp: Add repeater nodes 42143270e41c arm64: dts: qcom: x1e80100-crd: Add repeater nodes e49e3457b223 arm64: dts: qcom: x1e80100: Add dedicated pmic dtsi 43392fe521c7 arm64: dts: qcom: x1e80100: Add SPMI support 509352a15f4e arm64: dts: qcom: pm6150: define USB-C related blocks 39818e89c180 arm64: dts: qcom: sdm632-fairphone-fp3: enable USB-C port handling cf3fbd0a3e6f arm64: dts: qcom: sm6350: Add Crypto Engine 03971dc4b142 arm64: dts: qcom: sc8280xp: Add missing hs_phy_irq in USB nodes 994ee3be0ac7 arm64: dts: qcom: sc8180x-lenovo-flex-5g: Allow UFS regulators load/mode setting bf0c74cbaf81 arm64: dts: qcom: sc8180x-lenovo-flex-5g: set touchpad i2c frequency to 1 MHz 1da9c05605df arm64: dts: qcom: sc8180x-lenovo-flex-5g: move pinctrl to appropriate nodes 2139a6179bc6 arm64: dts: qcom: sc8180x-lenovo-flex-5g: set names for i2c hid nodes 5e67d6fe2590 arm64: dts: qcom: sc8180x-lenovo-flex-5g: fix GPU firmware path 29c532902fbe dt-bindings: soc: qcom: qcom,pmic-glink: document QCM6490 compatible 4ef050954490 arm64: dts: qcom: sdm670-google-sargo: add panel 4d57d77db758 arm64: dts: qcom: sm8650: add missing qcom,non-secure-domain property 5beeaab6947e arm64: dts: qcom: sm8550: add missing qcom,non-secure-domain property 6c08285503d5 arm64: dts: qcom: sm8450: add missing qcom,non-secure-domain property 6e81e9a45081 arm64: dts: qcom: qcs6490-rb3gen2: Name the regulators b51adcfa5e4e arm64: dts: qcom: x1e80100-crd: switch WSA8845 speakers to shared reset-gpio f56199dc0b4c arm64: dts: qcom: x1e80100: correct SWR1 pack mode e407c51a9192 arm64: dts: qcom: qcm2290: Add LMH node 78ea7fd8529a arm64: dts: qcom: sc8280xp: Describe TCSR download mode register ed0e06b772a0 arm64: dts: qcom: sc8280xp: Add PS_HOLD restart 653f5ac8c56d arm64: dts: qcom: sc8280xp: Add QFPROM node 8b113929cba4 arm64: dts: qcom: sm8250-xiaomi-elish: add usb pd negotiation support ef34967aa707 arm64: dts: qcom: sc8280xp: enable GICv3 ITS for PCIe 5ad7aff41781 arm64: dts: qcom: sc8280xp: add missing PCIe minimum OPP c9c36fd3c3e4 arm64: dts: qcom: sc8280xp: Add missing LMH interrupts 9c5ddaa54576 arm64: dts: qcom: qcm6490-idp: add display and panel b5fbaf38d7c9 dt-bindings: arm: qcom,ids: Add SoC ID for X1E80100 a3d157706fb0 dt-bindings: display: simple: add support for Crystal Clear CMT430B19N00 cf6cd5bc0bde dt-bindings: Add Crystal Clear Technology vendor prefix 111bd9344cc1 dt-bindings: net: wireless: brcm,bcm4329-fmac: Add CYW43439 DT binding f51fde39203a dt-bindings: display/lvds-codec: add ti,sn65lvds94 d60610231ef6 Merge drm/drm-next into drm-misc-next 4c258740e5ce dt-bindings: gpu: mali-valhall-csf: Add support for Arm Mali CSF GPUs 26231fa0490c dt-bindings: display: panel-simple-dsi: add s6e3fa7 ams559nk06 compat git-subtree-dir: dts/upstream git-subtree-split: 20e0f0897ea26981d3127511c150dd56c5296d50

commit: 762f85bb2e36762ee4d7395002b8181905aec690 [log] [tgz]
author: Tom Rini <trini@konsulko.com> Sat Jul 20 11:15:10 2024 -0600
committer: Tom Rini <trini@konsulko.com> Sat Jul 20 11:15:10 2024 -0600
tree: 039d9c51c14b030c63846da2b2563d11dea8808b
parent: 6bb92fcf7d2fea2314d616e5e2391a8bf2b0fdfa [diff]
diff --git a/Bindings/Makefile b/Bindings/Makefile
index 5e08e3a..bf7d646 100644
--- a/Bindings/Makefile
+++ b/Bindings/Makefile

@@ -25,23 +25,25 @@
 $(obj)/%.example.dts: $(src)/%.yaml check_dtschema_version FORCE
 	$(call if_changed,extract_ex)
 
-find_all_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \
+find_all_cmd = find $(src) \( -name '*.yaml' ! \
 		-name 'processed-schema*' \)
 
 find_cmd = $(find_all_cmd) | \
 		sed 's|^$(srctree)/||' | \
 		grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))" | \
 		sed 's|^|$(srctree)/|'
-CHK_DT_DOCS := $(shell $(find_cmd))
+CHK_DT_EXAMPLES := $(patsubst $(srctree)/%.yaml,%.example.dtb, $(shell $(find_cmd)))
 
 quiet_cmd_yamllint = LINT    $(src)
       cmd_yamllint = ($(find_cmd) | \
                      xargs -n200 -P$$(nproc) \
-		     $(DT_SCHEMA_LINT) -f parsable -c $(srctree)/$(src)/.yamllint >&2) || true
+		     $(DT_SCHEMA_LINT) -f parsable -c $(src)/.yamllint >&2) \
+		     && touch $@ || true
 
-quiet_cmd_chk_bindings = CHKDT   $@
+quiet_cmd_chk_bindings = CHKDT   $(src)
       cmd_chk_bindings = ($(find_cmd) | \
-                         xargs -n200 -P$$(nproc) $(DT_DOC_CHECKER) -u $(srctree)/$(src)) || true
+			  xargs -n200 -P$$(nproc) $(DT_DOC_CHECKER) -u $(src)) \
+			  && touch $@ || true
 
 quiet_cmd_mk_schema = SCHEMA  $@
       cmd_mk_schema = f=$$(mktemp) ; \
@@ -49,12 +51,6 @@
                       $(DT_MK_SCHEMA) -j $(DT_MK_SCHEMA_FLAGS) @$$f > $@ ; \
 		      rm -f $$f
 
-define rule_chkdt
-	$(if $(DT_SCHEMA_LINT),$(call cmd,yamllint),)
-	$(call cmd,chk_bindings)
-	$(call cmd,mk_schema)
-endef
-
 DT_DOCS = $(patsubst $(srctree)/%,%,$(shell $(find_all_cmd)))
 
 override DTC_FLAGS := \
@@ -64,12 +60,19 @@
 	-Wno-unique_unit_address \
 	-Wunique_unit_address_if_enabled
 
+$(obj)/processed-schema.json: $(DT_DOCS) check_dtschema_version FORCE
+	$(call if_changed,mk_schema)
+
-$(obj)/processed-schema.json: $(DT_DOCS) $(src)/.yamllint check_dtschema_version FORCE
-	$(call if_changed_rule,chkdt)
+targets += .dt-binding.checked .yamllint.checked
+$(obj)/.yamllint.checked: $(DT_DOCS) $(src)/.yamllint FORCE
+	$(if $(DT_SCHEMA_LINT),$(call if_changed,yamllint),)
+
+$(obj)/.dt-binding.checked: $(DT_DOCS) FORCE
+	$(call if_changed,chk_bindings)
 
 always-y += processed-schema.json
-always-$(CHECK_DT_BINDING) += $(patsubst $(srctree)/$(src)/%.yaml,%.example.dts, $(CHK_DT_DOCS))
-always-$(CHECK_DT_BINDING) += $(patsubst $(srctree)/$(src)/%.yaml,%.example.dtb, $(CHK_DT_DOCS))
+targets += $(patsubst $(obj)/%,%, $(CHK_DT_EXAMPLES))
+targets += $(patsubst $(obj)/%.dtb,%.dts, $(CHK_DT_EXAMPLES))
 
 # Hack: avoid 'Argument list too long' error for 'make clean'. Remove most of
 # build artifacts here before they are processed by scripts/Makefile.clean
@@ -78,3 +81,6 @@
 
 dt_compatible_check: $(obj)/processed-schema.json
 	$(Q)$(srctree)/scripts/dtc/dt-extract-compatibles $(srctree) | xargs dt-check-compatible -v -s $<
+
+PHONY += dt_binding_check
+dt_binding_check: $(obj)/.dt-binding.checked $(obj)/.yamllint.checked $(CHK_DT_EXAMPLES)

diff --git a/Bindings/access-controllers/access-controllers.yaml b/Bindings/access-controllers/access-controllers.yaml
new file mode 100644
index 0000000..99e2865
--- /dev/null
+++ b/Bindings/access-controllers/access-controllers.yaml

@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/access-controllers/access-controllers.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Domain Access Controllers
+
+maintainers:
+  - Oleksii Moisieiev <oleksii_moisieiev@epam.com>
+
+description: |+
+  Common access controllers properties
+
+  Access controllers are in charge of stating which of the hardware blocks under
+  their responsibility (their domain) can be accesssed by which compartment. A
+  compartment can be a cluster of CPUs (or coprocessors), a range of addresses
+  or a group of hardware blocks. An access controller's domain is the set of
+  resources covered by the access controller.
+
+  This device tree binding can be used to bind devices to their access
+  controller provided by access-controllers property. In this case, the device
+  is a consumer and the access controller is the provider.
+
+  An access controller can be represented by any node in the device tree and
+  can provide one or more configuration parameters, needed to control parameters
+  of the consumer device. A consumer node can refer to the provider by phandle
+  and a set of phandle arguments, specified by '#access-controller-cells'
+  property in the access controller node.
+
+  Access controllers are typically used to set/read the permissions of a
+  hardware block and grant access to it. Any of which depends on the access
+  controller. The capabilities of each access controller are defined by the
+  binding of the access controller device.
+
+  Each node can be a consumer for the several access controllers.
+
+# always select the core schema
+select: true
+
+properties:
+  "#access-controller-cells":
+    description:
+      Number of cells in an access-controllers specifier;
+      Can be any value as specified by device tree binding documentation
+      of a particular provider. The node is an access controller.
+
+  access-controller-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      A list of access-controllers names, sorted in the same order as
+      access-controllers entries. Consumer drivers will use
+      access-controller-names to match with existing access-controllers entries.
+
+  access-controllers:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      A list of access controller specifiers, as defined by the
+      bindings of the access-controllers provider.
+
+additionalProperties: true
+
+examples:
+  - |
+    clock_controller: access-controllers@50000 {
+        reg = <0x50000 0x400>;
+        #access-controller-cells = <2>;
+    };
+
+    bus_controller: bus@60000 {
+        reg = <0x60000 0x10000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+        #access-controller-cells = <3>;
+
+        uart4: serial@60100 {
+            reg = <0x60100 0x400>;
+            clocks = <&clk_serial>;
+            access-controllers = <&clock_controller 1 2>,
+                                 <&bus_controller 1 3 5>;
+            access-controller-names = "clock", "bus";
+        };
+    };

diff --git a/Bindings/arm/altera/socfpga-sdram-controller.txt b/Bindings/arm/altera/socfpga-sdram-controller.txt
deleted file mode 100644
index 77ca635..0000000
--- a/Bindings/arm/altera/socfpga-sdram-controller.txt
+++ /dev/null

@@ -1,12 +0,0 @@
-Altera SOCFPGA SDRAM Controller
-
-Required properties:
-- compatible : Should contain "altr,sdr-ctl" and "syscon".
-  syscon is required by the Altera SOCFPGA SDRAM EDAC.
-- reg : Should contain 1 register range (address and length)
-
-Example:
-	sdr: sdr@ffc25000 {
-		compatible = "altr,sdr-ctl", "syscon";
-		reg = <0xffc25000 0x1000>;
-	};

diff --git a/Bindings/arm/amlogic.yaml b/Bindings/arm/amlogic.yaml
index 949537c..a374b98 100644
--- a/Bindings/arm/amlogic.yaml
+++ b/Bindings/arm/amlogic.yaml

@@ -157,6 +157,7 @@
         items:
           - enum:
               - bananapi,bpi-cm4io
+              - mntre,reform2-cm4
           - const: bananapi,bpi-cm4
           - const: amlogic,a311d
           - const: amlogic,g12b
@@ -201,6 +202,18 @@
               - amlogic,ad402
           - const: amlogic,a1
 
+      - description: Boards with the Amlogic A4 A113L2 SoC
+        items:
+          - enum:
+              - amlogic,ba400
+          - const: amlogic,a4
+
+      - description: Boards with the Amlogic A5 A113X2 SoC
+        items:
+          - enum:
+              - amlogic,av400
+          - const: amlogic,a5
+
       - description: Boards with the Amlogic C3 C302X/C308L SoC
         items:
           - enum:

diff --git a/Bindings/arm/apm/scu.txt b/Bindings/arm/apm/scu.txt
deleted file mode 100644
index b45be06..0000000
--- a/Bindings/arm/apm/scu.txt
+++ /dev/null

@@ -1,17 +0,0 @@
-APM X-GENE SoC series SCU Registers
-
-This system clock unit contain various register that control block resets,
-clock enable/disables, clock divisors and other deepsleep registers.
-
-Properties:
- - compatible : should contain two values. First value must be:
-		   - "apm,xgene-scu"
-		second value must be always "syscon".
-
- - reg : offset and length of the register set.
-
-Example :
-	scu: system-clk-controller@17000000 {
-		compatible = "apm,xgene-scu","syscon";
-		reg = <0x0 0x17000000 0x0 0x400>;
-	};

diff --git a/Bindings/arm/aspeed/aspeed.yaml b/Bindings/arm/aspeed/aspeed.yaml
index 749ee54..95113df 100644
--- a/Bindings/arm/aspeed/aspeed.yaml
+++ b/Bindings/arm/aspeed/aspeed.yaml

@@ -35,7 +35,10 @@
               - ampere,mtjade-bmc
               - aspeed,ast2500-evb
               - asrock,e3c246d4i-bmc
+              - asrock,e3c256d4i-bmc
               - asrock,romed8hm3-bmc
+              - asrock,spc621d8hm3-bmc
+              - asrock,x570d4u-bmc
               - bytedance,g220a-bmc
               - facebook,cmm-bmc
               - facebook,minipack-bmc
@@ -74,15 +77,18 @@
               - ampere,mtmitchell-bmc
               - aspeed,ast2600-evb
               - aspeed,ast2600-evb-a1
+              - asus,x4tf-bmc
               - facebook,bletchley-bmc
               - facebook,cloudripper-bmc
               - facebook,elbert-bmc
               - facebook,fuji-bmc
               - facebook,greatlakes-bmc
+              - facebook,harma-bmc
               - facebook,minerva-cmc
               - facebook,yosemite4-bmc
               - ibm,everest-bmc
               - ibm,rainier-bmc
+              - ibm,system1-bmc
               - ibm,tacoma-bmc
               - inventec,starscream-bmc
               - inventec,transformer-bmc

diff --git a/Bindings/arm/bcm/brcm,bcm4708.yaml b/Bindings/arm/bcm/brcm,bcm4708.yaml
index 4cc4e67..d925e7a 100644
--- a/Bindings/arm/bcm/brcm,bcm4708.yaml
+++ b/Bindings/arm/bcm/brcm,bcm4708.yaml

@@ -53,6 +53,7 @@
       - description: BCM4709 based boards
         items:
           - enum:
+              - asus,rt-ac3200
               - asus,rt-ac87u
               - buffalo,wxr-1900dhp
               - linksys,ea9200
@@ -67,6 +68,7 @@
         items:
           - enum:
               - asus,rt-ac3100
+              - asus,rt-ac5300
               - asus,rt-ac88u
               - dlink,dir-885l
               - dlink,dir-890l

diff --git a/Bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
index 39e3c24..1f84407 100644
--- a/Bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+++ b/Bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml

@@ -46,6 +46,30 @@
       - compatible
       - "#clock-cells"
 
+  gpio:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: raspberrypi,firmware-gpio
+
+      gpio-controller: true
+
+      "#gpio-cells":
+        const: 2
+        description:
+          The first cell is the pin number, and the second cell is used to
+          specify the gpio polarity (GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW).
+
+      gpio-line-names:
+        minItems: 8
+
+    required:
+      - compatible
+      - gpio-controller
+      - "#gpio-cells"
+
   reset:
     type: object
     additionalProperties: false
@@ -96,6 +120,12 @@
             #clock-cells = <1>;
         };
 
+        expgpio: gpio {
+            compatible = "raspberrypi,firmware-gpio";
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+
         reset: reset {
             compatible = "raspberrypi,firmware-reset";
             #reset-cells = <1>;

diff --git a/Bindings/arm/fsl.yaml b/Bindings/arm/fsl.yaml
index 0027201..6d185d0 100644
--- a/Bindings/arm/fsl.yaml
+++ b/Bindings/arm/fsl.yaml

@@ -813,6 +813,14 @@
           - const: tq,imx6ull-tqma6ull2l      # MCIMX6Y2, LGA SoM variant
           - const: fsl,imx6ull
 
+      - description: Seeed Stuido i.MX6ULL SoM on dev boards
+        items:
+          - enum:
+              - seeed,imx6ull-seeed-npi-emmc
+              - seeed,imx6ull-seeed-npi-nand
+          - const: seeed,imx6ull-seeed-npi
+          - const: fsl,imx6ull
+
       - description: i.MX6ULZ based Boards
         items:
           - enum:
@@ -1050,6 +1058,7 @@
           - enum:
               - beacon,imx8mp-beacon-kit  # i.MX8MP Beacon Development Kit
               - dmo,imx8mp-data-modul-edm-sbc # i.MX8MP eDM SBC
+              - emcraft,imx8mp-navqp      # i.MX8MP Emcraft Systems NavQ+ Kit
               - fsl,imx8mp-evk            # i.MX8MP EVK Board
               - gateworks,imx8mp-gw71xx-2x # i.MX8MP Gateworks Board
               - gateworks,imx8mp-gw72xx-2x # i.MX8MP Gateworks Board
@@ -1218,7 +1227,6 @@
           - enum:
               - einfochips,imx8qxp-ai_ml  # i.MX8QXP AI_ML Board
               - fsl,imx8qxp-mek           # i.MX8QXP MEK Board
-              - toradex,colibri-imx8x     # Colibri iMX8X Modules
           - const: fsl,imx8qxp
 
       - description: i.MX8DXL based Boards
@@ -1227,7 +1235,7 @@
               - fsl,imx8dxl-evk           # i.MX8DXL EVK Board
           - const: fsl,imx8dxl
 
-      - description: i.MX8QXP Boards with Toradex Colibri iMX8X Modules
+      - description: i.MX8QXP/i.MX8DX Boards with Toradex Colibri iMX8X Modules
         items:
           - enum:
               - toradex,colibri-imx8x-aster   # Colibri iMX8X Module on Aster Board
@@ -1235,7 +1243,9 @@
               - toradex,colibri-imx8x-iris    # Colibri iMX8X Module on Iris Board
               - toradex,colibri-imx8x-iris-v2 # Colibri iMX8X Module on Iris Board V2
           - const: toradex,colibri-imx8x
-          - const: fsl,imx8qxp
+          - enum:
+              - fsl,imx8qxp
+              - fsl,imx8dx
 
       - description:
           TQMa8Xx is a series of SOM featuring NXP i.MX8X system-on-chip
@@ -1536,6 +1546,12 @@
               - nxp,s32g274a-rdb2
           - const: nxp,s32g2
 
+      - description: S32G3 based Boards
+        items:
+          - enum:
+              - nxp,s32g399a-rdb3
+          - const: nxp,s32g3
+
       - description: S32V234 based Boards
         items:
           - enum:

diff --git a/Bindings/arm/keystone/ti,sci.yaml b/Bindings/arm/keystone/ti,sci.yaml
index c24ad09..7f06b10 100644
--- a/Bindings/arm/keystone/ti,sci.yaml
+++ b/Bindings/arm/keystone/ti,sci.yaml

@@ -61,10 +61,6 @@
   mboxes:
     minItems: 2
 
-  ti,system-reboot-controller:
-    description: Determines If system reboot can be triggered by SoC reboot
-    type: boolean
-
   ti,host-id:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: |
@@ -94,7 +90,6 @@
   - |
     pmmc: system-controller@2921800 {
       compatible = "ti,k2g-sci";
-      ti,system-reboot-controller;
       mbox-names = "rx", "tx";
       mboxes = <&msgmgr 5 2>,
                <&msgmgr 0 0>;

diff --git a/Bindings/arm/marvell/armada-37xx.txt b/Bindings/arm/marvell/armada-37xx.txt
deleted file mode 100644
index 29fa93d..0000000
--- a/Bindings/arm/marvell/armada-37xx.txt
+++ /dev/null

@@ -1,32 +0,0 @@
-Power management
-----------------
-
-For power management (particularly DVFS and AVS), the North Bridge
-Power Management component is needed:
-
-Required properties:
-- compatible     : should contain "marvell,armada-3700-nb-pm", "syscon";
-- reg            : the register start and length for the North Bridge
-		    Power Management
-
-Example:
-
-nb_pm: syscon@14000 {
-	compatible = "marvell,armada-3700-nb-pm", "syscon";
-	reg = <0x14000 0x60>;
-}
-
-AVS
----
-
-For AVS an other component is needed:
-
-Required properties:
-- compatible     : should contain "marvell,armada-3700-avs", "syscon";
-- reg            : the register start and length for the AVS
-
-Example:
-avs: avs@11500 {
-	compatible = "marvell,armada-3700-avs", "syscon";
-	reg = <0x11500 0x40>;
-}

diff --git a/Bindings/arm/qcom,coresight-tpda.yaml b/Bindings/arm/qcom,coresight-tpda.yaml
index ea3c5db..76163abe 100644
--- a/Bindings/arm/qcom,coresight-tpda.yaml
+++ b/Bindings/arm/qcom,coresight-tpda.yaml

@@ -66,13 +66,11 @@
       - const: apb_pclk
 
   in-ports:
-    type: object
     description: |
       Input connections from TPDM to TPDA
     $ref: /schemas/graph.yaml#/properties/ports
 
   out-ports:
-    type: object
     description: |
       Output connections from the TPDA to legacy CoreSight trace bus.
     $ref: /schemas/graph.yaml#/properties/ports
@@ -97,33 +95,31 @@
   # minimum tpda definition.
   - |
     tpda@6004000 {
-       compatible = "qcom,coresight-tpda", "arm,primecell";
-       reg = <0x6004000 0x1000>;
+      compatible = "qcom,coresight-tpda", "arm,primecell";
+      reg = <0x6004000 0x1000>;
 
-       clocks = <&aoss_qmp>;
-       clock-names = "apb_pclk";
+      clocks = <&aoss_qmp>;
+      clock-names = "apb_pclk";
 
-       in-ports {
-         #address-cells = <1>;
-         #size-cells = <0>;
+      in-ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
 
         port@0 {
           reg = <0>;
           tpda_qdss_0_in_tpdm_dcc: endpoint {
-            remote-endpoint =
-              <&tpdm_dcc_out_tpda_qdss_0>;
-            };
+            remote-endpoint = <&tpdm_dcc_out_tpda_qdss_0>;
+          };
         };
       };
 
-       out-ports {
-         port {
-                 tpda_qdss_out_funnel_in0: endpoint {
-                    remote-endpoint =
-                    <&funnel_in0_in_tpda_qdss>;
-                  };
+      out-ports {
+        port {
+          tpda_qdss_out_funnel_in0: endpoint {
+            remote-endpoint = <&funnel_in0_in_tpda_qdss>;
           };
-       };
+        };
+      };
     };
 
 ...

diff --git a/Bindings/arm/qcom.yaml b/Bindings/arm/qcom.yaml
index 66beaac..ae88541 100644
--- a/Bindings/arm/qcom.yaml
+++ b/Bindings/arm/qcom.yaml

@@ -137,6 +137,7 @@
               - microsoft,dempsey
               - microsoft,makepeace
               - microsoft,moneypenny
+              - motorola,falcon
               - samsung,s3ve3g
           - const: qcom,msm8226
 
@@ -184,13 +185,16 @@
               - oneplus,bacon
               - samsung,klte
               - sony,xperia-castor
+              - sony,xperia-leo
           - const: qcom,msm8974pro
           - const: qcom,msm8974
 
       - items:
-          - const: qcom,msm8916-mtp
-          - const: qcom,msm8916-mtp/1
-          - const: qcom,msm8916
+          - enum:
+              - samsung,kltechn
+          - const: samsung,klte
+          - const: qcom,msm8974pro
+          - const: qcom,msm8974
 
       - items:
           - enum:
@@ -200,6 +204,8 @@
               - gplus,fl8005a
               - huawei,g7
               - longcheer,l8910
+              - longcheer,l8150
+              - qcom,msm8916-mtp
               - samsung,a3u-eur
               - samsung,a5u-eur
               - samsung,e5
@@ -221,11 +227,6 @@
           - const: qcom,msm8916
 
       - items:
-          - const: longcheer,l8150
-          - const: qcom,msm8916-v1-qrd/9-v1
-          - const: qcom,msm8916
-
-      - items:
           - enum:
               - motorola,potter
               - xiaomi,daisy
@@ -1003,6 +1004,7 @@
               - qcom,sm8550-hdk
               - qcom,sm8550-mtp
               - qcom,sm8550-qrd
+              - sony,pdx234
           - const: qcom,sm8550
 
       - items:

diff --git a/Bindings/arm/rockchip.yaml b/Bindings/arm/rockchip.yaml
index fcf7316..e04c213 100644
--- a/Bindings/arm/rockchip.yaml
+++ b/Bindings/arm/rockchip.yaml

@@ -49,6 +49,11 @@
               - anbernic,rg-arc-s
           - const: rockchip,rk3566
 
+      - description: ArmSoM Sige7 board
+        items:
+          - const: armsom,sige7
+          - const: rockchip,rk3588
+
       - description: Asus Tinker board
         items:
           - const: asus,rk3288-tinker
@@ -198,6 +203,13 @@
           - const: firefly,rk3568-roc-pc
           - const: rockchip,rk3568
 
+      - description: Forlinx FET3588-C SoM
+        items:
+          - enum:
+              - forlinx,ok3588-c
+          - const: forlinx,fet3588-c
+          - const: rockchip,rk3588
+
       - description: FriendlyElec NanoPi R2 series boards
         items:
           - enum:
@@ -236,6 +248,11 @@
           - const: friendlyarm,nanopc-t6
           - const: rockchip,rk3588
 
+      - description: GameForce Chi
+        items:
+          - const: gameforce,chi
+          - const: rockchip,rk3326
+
       - description: GeekBuying GeekBox
         items:
           - const: geekbuying,geekbox
@@ -631,7 +648,7 @@
           - const: phytec,rk3288-phycore-som
           - const: rockchip,rk3288
 
-      - description: Pine64 PinebookPro
+      - description: Pine64 Pinebook Pro
         items:
           - const: pine64,pinebook-pro
           - const: rockchip,rk3399
@@ -644,7 +661,7 @@
           - const: pine64,pinenote
           - const: rockchip,rk3566
 
-      - description: Pine64 PinePhonePro
+      - description: Pine64 PinePhone Pro
         items:
           - const: pine64,pinephone-pro
           - const: rockchip,rk3399
@@ -682,7 +699,7 @@
           - const: pine64,quartzpro64
           - const: rockchip,rk3588
 
-      - description: Pine64 SoQuartz SoM
+      - description: Pine64 SOQuartz
         items:
           - enum:
               - pine64,soquartz-blade
@@ -700,12 +717,17 @@
               - powkiddy,x55
           - const: rockchip,rk3566
 
+      - description: Protonic MECSBC board
+        items:
+          - const: prt,mecsbc
+          - const: rockchip,rk3568
+
       - description: QNAP TS-433-4G 4-Bay NAS
         items:
           - const: qnap,ts433
           - const: rockchip,rk3568
 
-      - description: Radxa Compute Module 3(CM3)
+      - description: Radxa Compute Module 3 (CM3)
         items:
           - enum:
               - radxa,cm3-io
@@ -767,22 +789,27 @@
           - const: radxa,rockpis
           - const: rockchip,rk3308
 
-      - description: Radxa Rock2 Square
+      - description: Radxa Rock 2 Square
         items:
           - const: radxa,rock2-square
           - const: rockchip,rk3288
 
-      - description: Radxa ROCK3 Model A
+      - description: Radxa ROCK 3A
         items:
           - const: radxa,rock3a
           - const: rockchip,rk3568
 
-      - description: Radxa ROCK 5 Model A
+      - description: Radxa ROCK 3C
+        items:
+          - const: radxa,rock-3c
+          - const: rockchip,rk3566
+
+      - description: Radxa ROCK 5A
         items:
           - const: radxa,rock-5a
           - const: rockchip,rk3588s
 
-      - description: Radxa ROCK 5 Model B
+      - description: Radxa ROCK 5B
         items:
           - const: radxa,rock-5b
           - const: rockchip,rk3588
@@ -927,6 +954,11 @@
           - const: turing,rk1
           - const: rockchip,rk3588
 
+      - description: WolfVision PF5 mainboard
+        items:
+          - const: wolfvision,rk3568-pf5
+          - const: rockchip,rk3568
+
       - description: Xunlong Orange Pi 5 Plus
         items:
           - const: xunlong,orangepi-5-plus

diff --git a/Bindings/arm/stm32/st,mlahb.yaml b/Bindings/arm/stm32/st,mlahb.yaml
index d2dce23..3e99634 100644
--- a/Bindings/arm/stm32/st,mlahb.yaml
+++ b/Bindings/arm/stm32/st,mlahb.yaml

@@ -54,11 +54,10 @@
 
 examples:
   - |
-    mlahb: ahb@38000000 {
+    ahb {
       compatible = "st,mlahb", "simple-bus";
       #address-cells = <1>;
       #size-cells = <1>;
-      reg = <0x10000000 0x40000>;
       ranges;
       dma-ranges = <0x00000000 0x38000000 0x10000>,
                    <0x10000000 0x10000000 0x60000>,

diff --git a/Bindings/arm/sunxi.yaml b/Bindings/arm/sunxi.yaml
index 09d835d..c2a158b 100644
--- a/Bindings/arm/sunxi.yaml
+++ b/Bindings/arm/sunxi.yaml

@@ -56,6 +56,21 @@
           - const: anbernic,rg-nano
           - const: allwinner,sun8i-v3s
 
+      - description: Anbernic RG35XX (2024)
+        items:
+          - const: anbernic,rg35xx-2024
+          - const: allwinner,sun50i-h700
+
+      - description: Anbernic RG35XX Plus
+        items:
+          - const: anbernic,rg35xx-plus
+          - const: allwinner,sun50i-h700
+
+      - description: Anbernic RG35XX H
+        items:
+          - const: anbernic,rg35xx-h
+          - const: allwinner,sun50i-h700
+
       - description: Amarula A64 Relic
         items:
           - const: amarula,a64-relic
@@ -774,6 +789,11 @@
           - const: pocketbook,touch-lux-3
           - const: allwinner,sun5i-a13
 
+      - description: PocketBook 614 Plus
+        items:
+          - const: pocketbook,614-plus
+          - const: allwinner,sun5i-a13
+
       - description: Point of View Protab2-IPS9
         items:
           - const: pov,protab2-ips9
@@ -860,6 +880,11 @@
           - const: allwinner,sl631
           - const: allwinner,sun8i-v3
 
+      - description: Tanix TX1
+        items:
+          - const: oranth,tanix-tx1
+          - const: allwinner,sun50i-h616
+
       - description: Tanix TX6
         items:
           - const: oranth,tanix-tx6

diff --git a/Bindings/ata/ahci-da850.txt b/Bindings/ata/ahci-da850.txt
deleted file mode 100644
index 5f81934..0000000
--- a/Bindings/ata/ahci-da850.txt
+++ /dev/null

@@ -1,18 +0,0 @@
-Device tree binding for the TI DA850 AHCI SATA Controller
----------------------------------------------------------
-
-Required properties:
-  - compatible: must be "ti,da850-ahci"
-  - reg: physical base addresses and sizes of the two register regions
-         used by the controller: the register map as defined by the
-         AHCI 1.1 standard and the Power Down Control Register (PWRDN)
-         for enabling/disabling the SATA clock receiver
-  - interrupts: interrupt specifier (refer to the interrupt binding)
-
-Example:
-
-	sata: sata@218000 {
-		compatible = "ti,da850-ahci";
-		reg = <0x218000 0x2000>, <0x22c018 0x4>;
-		interrupts = <67>;
-	};

diff --git a/Bindings/ata/fsl,imx-pata.yaml b/Bindings/ata/fsl,imx-pata.yaml
new file mode 100644
index 0000000..324e241
--- /dev/null
+++ b/Bindings/ata/fsl,imx-pata.yaml

@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/fsl,imx-pata.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX PATA Controller
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx31-pata
+              - fsl,imx51-pata
+          - const: fsl,imx27-pata
+      - const: fsl,imx27-pata
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: PATA Controller interrupts
+
+  clocks:
+    items:
+      - description: PATA Controller clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    pata: pata@83fe0000 {
+        compatible = "fsl,imx51-pata", "fsl,imx27-pata";
+        reg = <0x83fe0000 0x4000>;
+        interrupts = <70>;
+        clocks = <&clks 161>;
+    };

diff --git a/Bindings/ata/imx-pata.txt b/Bindings/ata/imx-pata.txt
deleted file mode 100644
index f1172f0..0000000
--- a/Bindings/ata/imx-pata.txt
+++ /dev/null

@@ -1,16 +0,0 @@
-* Freescale i.MX PATA Controller
-
-Required properties:
-- compatible: "fsl,imx27-pata"
-- reg: Address range of the PATA Controller
-- interrupts: The interrupt of the PATA Controller
-- clocks: the clocks for the PATA Controller
-
-Example:
-
-	pata: pata@83fe0000 {
-		compatible = "fsl,imx51-pata", "fsl,imx27-pata";
-		reg = <0x83fe0000 0x4000>;
-		interrupts = <70>;
-		clocks = <&clks 161>;
-	};

diff --git a/Bindings/ata/ti,da850-ahci.yaml b/Bindings/ata/ti,da850-ahci.yaml
new file mode 100644
index 0000000..ce13c76
--- /dev/null
+++ b/Bindings/ata/ti,da850-ahci.yaml

@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ti,da850-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DA850 AHCI SATA Controller
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+properties:
+  compatible:
+    const: ti,da850-ahci
+
+  reg:
+    items:
+      - description: Address and size of the register map as defined by the AHCI 1.1 standard.
+      - description:
+          Address and size of Power Down Control Register (PWRDN) for enabling/disabling the SATA clock
+          receiver.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    sata@218000 {
+        compatible = "ti,da850-ahci";
+        reg = <0x218000 0x2000>, <0x22c018 0x4>;
+        interrupts = <67>;
+    };

diff --git a/Bindings/bus/st,stm32-etzpc.yaml b/Bindings/bus/st,stm32-etzpc.yaml
new file mode 100644
index 0000000..d12b62a
--- /dev/null
+++ b/Bindings/bus/st,stm32-etzpc.yaml

@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/st,stm32-etzpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32 Extended TrustZone protection controller
+
+description: |
+  The ETZPC configures TrustZone security in a SoC having bus masters and
+  devices with programmable-security attributes (securable resources).
+
+maintainers:
+  - Gatien Chevallier <gatien.chevallier@foss.st.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: st,stm32-etzpc
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: st,stm32-etzpc
+      - const: simple-bus
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  "#access-controller-cells":
+    const: 1
+    description:
+      Contains the firewall ID associated to the peripheral.
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    description: Peripherals
+    type: object
+
+    additionalProperties: true
+
+    required:
+      - access-controllers
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - "#access-controller-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    // In this example, the usart2 device refers to rifsc as its access
+    // controller.
+    // Access rights are verified before creating devices.
+
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp13-clks.h>
+    #include <dt-bindings/reset/stm32mp13-resets.h>
+
+    etzpc: bus@5c007000 {
+        compatible = "st,stm32-etzpc", "simple-bus";
+        reg = <0x5c007000 0x400>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        #access-controller-cells = <1>;
+        ranges;
+
+        usart2: serial@4c001000 {
+            compatible = "st,stm32h7-uart";
+            reg = <0x4c001000 0x400>;
+            interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&rcc USART2_K>;
+            resets = <&rcc USART2_R>;
+            wakeup-source;
+            dmas = <&dmamux1 43 0x400 0x5>,
+                    <&dmamux1 44 0x400 0x1>;
+            dma-names = "rx", "tx";
+            access-controllers = <&etzpc 17>;
+        };
+    };

diff --git a/Bindings/bus/st,stm32mp25-rifsc.yaml b/Bindings/bus/st,stm32mp25-rifsc.yaml
new file mode 100644
index 0000000..20acd1a
--- /dev/null
+++ b/Bindings/bus/st,stm32mp25-rifsc.yaml

@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/st,stm32mp25-rifsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32 Resource isolation framework security controller
+
+maintainers:
+  - Gatien Chevallier <gatien.chevallier@foss.st.com>
+
+description: |
+  Resource isolation framework (RIF) is a comprehensive set of hardware blocks
+  designed to enforce and manage isolation of STM32 hardware resources like
+  memory and peripherals.
+
+  The RIFSC (RIF security controller) is composed of three sets of registers,
+  each managing a specific set of hardware resources:
+    - RISC registers associated with RISUP logic (resource isolation device unit
+      for peripherals), assign all non-RIF aware peripherals to zero, one or
+      any security domains (secure, privilege, compartment).
+    - RIMC registers: associated with RIMU logic (resource isolation master
+      unit), assign all non RIF-aware bus master to one security domain by
+      setting secure, privileged and compartment information on the system bus.
+      Alternatively, the RISUP logic controlling the device port access to a
+      peripheral can assign target bus attributes to this peripheral master port
+      (supported attribute: CID).
+    - RISC registers associated with RISAL logic (resource isolation device unit
+      for address space - Lite version), assign address space subregions to one
+      security domains (secure, privilege, compartment).
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: st,stm32mp25-rifsc
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: st,stm32mp25-rifsc
+      - const: simple-bus
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  "#access-controller-cells":
+    const: 1
+    description:
+      Contains the firewall ID associated to the peripheral.
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    description: Peripherals
+    type: object
+
+    additionalProperties: true
+
+    required:
+      - access-controllers
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - "#access-controller-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    // In this example, the usart2 device refers to rifsc as its domain
+    // controller.
+    // Access rights are verified before creating devices.
+
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    rifsc: bus@42080000 {
+        compatible = "st,stm32mp25-rifsc", "simple-bus";
+        reg = <0x42080000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        #access-controller-cells = <1>;
+        ranges;
+
+        usart2: serial@400e0000 {
+              compatible = "st,stm32h7-uart";
+              reg = <0x400e0000 0x400>;
+              interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+              clocks = <&ck_flexgen_08>;
+              access-controllers = <&rifsc 32>;
+        };
+    };

diff --git a/Bindings/cache/qcom,llcc.yaml b/Bindings/cache/qcom,llcc.yaml
index 07ccbda..b9a9f2c 100644
--- a/Bindings/cache/qcom,llcc.yaml
+++ b/Bindings/cache/qcom,llcc.yaml

@@ -66,7 +66,6 @@
         compatible:
           contains:
             enum:
-              - qcom,qdu1000-llcc
               - qcom,sc7180-llcc
               - qcom,sm6350-llcc
     then:
@@ -104,6 +103,7 @@
         compatible:
           contains:
             enum:
+              - qcom,qdu1000-llcc
               - qcom,sc8180x-llcc
               - qcom,sc8280xp-llcc
               - qcom,x1e80100-llcc

diff --git a/Bindings/clock/airoha,en7523-scu.yaml b/Bindings/clock/airoha,en7523-scu.yaml
index 79b0752..3f42666 100644
--- a/Bindings/clock/airoha,en7523-scu.yaml
+++ b/Bindings/clock/airoha,en7523-scu.yaml

@@ -29,10 +29,13 @@
 properties:
   compatible:
     items:
-      - const: airoha,en7523-scu
+      - enum:
+          - airoha,en7523-scu
+          - airoha,en7581-scu
 
   reg:
-    maxItems: 2
+    minItems: 2
+    maxItems: 3
 
   "#clock-cells":
     description:
@@ -45,6 +48,30 @@
   - reg
   - '#clock-cells'
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: airoha,en7523-scu
+    then:
+      properties:
+        reg:
+          items:
+            - description: scu base address
+            - description: misc scu base address
+
+  - if:
+      properties:
+        compatible:
+          const: airoha,en7581-scu
+    then:
+      properties:
+        reg:
+          items:
+            - description: scu base address
+            - description: misc scu base address
+            - description: pb scu base address
+
 additionalProperties: false
 
 examples:

diff --git a/Bindings/clock/fixed-clock.yaml b/Bindings/clock/fixed-clock.yaml
index b0a4fb8..90fb106 100644
--- a/Bindings/clock/fixed-clock.yaml
+++ b/Bindings/clock/fixed-clock.yaml

@@ -11,6 +11,15 @@
   - Stephen Boyd <sboyd@kernel.org>
 
 properties:
+  $nodename:
+    anyOf:
+      - description:
+          Preferred name is 'clock-<freq>' with <freq> being the output
+          frequency as defined in the 'clock-frequency' property.
+        pattern: "^clock-([0-9]+|[a-z0-9-]+)$"
+      - description: Any name allowed
+        deprecated: true
+
   compatible:
     const: fixed-clock
 

diff --git a/Bindings/clock/fixed-factor-clock.yaml b/Bindings/clock/fixed-factor-clock.yaml
index 8f71ab3..4afdb1c 100644
--- a/Bindings/clock/fixed-factor-clock.yaml
+++ b/Bindings/clock/fixed-factor-clock.yaml

@@ -11,6 +11,15 @@
   - Stephen Boyd <sboyd@kernel.org>
 
 properties:
+  $nodename:
+    anyOf:
+      - description:
+          If the frequency is fixed, the preferred name is 'clock-<freq>' with
+          <freq> being the output frequency.
+        pattern: "^clock-([0-9]+|[0-9a-z-]+)$"
+      - description: Any name allowed
+        deprecated: true
+
   compatible:
     enum:
       - fixed-factor-clock

diff --git a/Bindings/clock/google,gs101-clock.yaml b/Bindings/clock/google,gs101-clock.yaml
index 1d2bcea..caf442e 100644
--- a/Bindings/clock/google,gs101-clock.yaml
+++ b/Bindings/clock/google,gs101-clock.yaml

@@ -30,16 +30,18 @@
       - google,gs101-cmu-top
       - google,gs101-cmu-apm
       - google,gs101-cmu-misc
+      - google,gs101-cmu-hsi0
+      - google,gs101-cmu-hsi2
       - google,gs101-cmu-peric0
       - google,gs101-cmu-peric1
 
   clocks:
     minItems: 1
-    maxItems: 3
+    maxItems: 5
 
   clock-names:
     minItems: 1
-    maxItems: 3
+    maxItems: 5
 
   "#clock-cells":
     const: 1
@@ -76,6 +78,55 @@
       properties:
         compatible:
           contains:
+            const: google,gs101-cmu-hsi0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24.576 MHz)
+            - description: HSI0 bus clock (from CMU_TOP)
+            - description: DPGTC (from CMU_TOP)
+            - description: USB DRD controller clock (from CMU_TOP)
+            - description: USB Display Port debug clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+            - const: dpgtc
+            - const: usb31drd
+            - const: usbdpdbg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - google,gs101-cmu-hsi2
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24.576 MHz)
+            - description: High Speed Interface bus clock (from CMU_TOP)
+            - description: High Speed Interface pcie clock (from CMU_TOP)
+            - description: High Speed Interface ufs clock (from CMU_TOP)
+            - description: High Speed Interface mmc clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+            - const: pcie
+            - const: ufs
+            - const: mmc
+
+  - if:
+      properties:
+        compatible:
+          contains:
             const: google,gs101-cmu-misc
 
     then:

diff --git a/Bindings/clock/loongson,ls2k-clk.yaml b/Bindings/clock/loongson,ls2k-clk.yaml
index 63a5901..4f79cdb 100644
--- a/Bindings/clock/loongson,ls2k-clk.yaml
+++ b/Bindings/clock/loongson,ls2k-clk.yaml

@@ -16,7 +16,9 @@
 properties:
   compatible:
     enum:
-      - loongson,ls2k-clk
+      - loongson,ls2k0500-clk
+      - loongson,ls2k-clk  # This is for Loongson-2K1000
+      - loongson,ls2k2000-clk
 
   reg:
     maxItems: 1

diff --git a/Bindings/clock/nxp,imx95-blk-ctl.yaml b/Bindings/clock/nxp,imx95-blk-ctl.yaml
new file mode 100644
index 0000000..2dffc02
--- /dev/null
+++ b/Bindings/clock/nxp,imx95-blk-ctl.yaml

@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nxp,imx95-blk-ctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX95 Block Control
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - nxp,imx95-lvds-csr
+          - nxp,imx95-display-csr
+          - nxp,imx95-camera-csr
+          - nxp,imx95-vpu-csr
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See
+      include/dt-bindings/clock/nxp,imx95-clock.h
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@4c410000 {
+      compatible = "nxp,imx95-vpu-csr", "syscon";
+      reg = <0x4c410000 0x10000>;
+      #clock-cells = <1>;
+      clocks = <&scmi_clk 114>;
+      power-domains = <&scmi_devpd 21>;
+    };
+...

diff --git a/Bindings/clock/nxp,imx95-display-master-csr.yaml b/Bindings/clock/nxp,imx95-display-master-csr.yaml
new file mode 100644
index 0000000..07f7412
--- /dev/null
+++ b/Bindings/clock/nxp,imx95-display-master-csr.yaml

@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nxp,imx95-display-master-csr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX95 Display Master Block Control
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+properties:
+  compatible:
+    items:
+      - const: nxp,imx95-display-master-csr
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See
+      include/dt-bindings/clock/nxp,imx95-clock.h
+
+  mux-controller:
+    type: object
+    $ref: /schemas/mux/reg-mux.yaml
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - mux-controller
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@4c410000 {
+      compatible = "nxp,imx95-display-master-csr", "syscon";
+      reg = <0x4c410000 0x10000>;
+      #clock-cells = <1>;
+      clocks = <&scmi_clk 62>;
+      power-domains = <&scmi_devpd 3>;
+
+      mux: mux-controller {
+        compatible = "mmio-mux";
+        #mux-control-cells = <1>;
+        mux-reg-masks = <0x4 0x00000001>; /* Pixel_link_sel */
+        idle-states = <0>;
+      };
+    };
+...

diff --git a/Bindings/clock/qcom,hfpll.txt b/Bindings/clock/qcom,hfpll.txt
deleted file mode 100644
index 5769cbb..0000000
--- a/Bindings/clock/qcom,hfpll.txt
+++ /dev/null

@@ -1,63 +0,0 @@
-High-Frequency PLL (HFPLL)
-
-PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>:
-		shall contain only one of the following. The generic
-		compatible "qcom,hfpll" should be also included.
-
-                        "qcom,hfpll-ipq8064", "qcom,hfpll"
-                        "qcom,hfpll-apq8064", "qcom,hfpll"
-                        "qcom,hfpll-msm8974", "qcom,hfpll"
-                        "qcom,hfpll-msm8960", "qcom,hfpll"
-                        "qcom,msm8976-hfpll-a53", "qcom,hfpll"
-                        "qcom,msm8976-hfpll-a72", "qcom,hfpll"
-                        "qcom,msm8976-hfpll-cci", "qcom,hfpll"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: address and size of HPLL registers. An optional second
-		    element specifies the address and size of the alias
-		    register region.
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to the xo clock.
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "xo".
-
-- clock-output-names:
-	Usage: required
-	Value type: <string>
-	Definition: Name of the PLL. Typically hfpllX where X is a CPU number
-		    starting at 0. Otherwise hfpll_Y where Y is more specific
-		    such as "l2".
-
-Example:
-
-1) An HFPLL for the L2 cache.
-
-	clock-controller@f9016000 {
-		compatible = "qcom,hfpll-ipq8064", "qcom,hfpll";
-		reg = <0xf9016000 0x30>;
-		clocks = <&xo_board>;
-		clock-names = "xo";
-		clock-output-names = "hfpll_l2";
-	};
-
-2) An HFPLL for CPU0. This HFPLL has the alias register region.
-
-	clock-controller@f908a000 {
-		compatible = "qcom,hfpll-ipq8064", "qcom,hfpll";
-		reg = <0xf908a000 0x30>, <0xf900a000 0x30>;
-		clocks = <&xo_board>;
-		clock-names = "xo";
-		clock-output-names = "hfpll0";
-	};

diff --git a/Bindings/clock/qcom,hfpll.yaml b/Bindings/clock/qcom,hfpll.yaml
new file mode 100644
index 0000000..8cb1c16
--- /dev/null
+++ b/Bindings/clock/qcom,hfpll.yaml

@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,hfpll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm High-Frequency PLL
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  The HFPLL is used as CPU PLL on various Qualcomm SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,msm8974-hfpll
+          - qcom,msm8976-hfpll-a53
+          - qcom,msm8976-hfpll-a72
+          - qcom,msm8976-hfpll-cci
+          - qcom,qcs404-hfpll
+      - const: qcom,hfpll
+        deprecated: true
+
+  reg:
+    items:
+      - description: HFPLL registers
+      - description: Alias register region
+    minItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  clocks:
+    items:
+      - description: board XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
+  clock-output-names:
+    description:
+      Name of the PLL. Typically hfpllX where X is a CPU number starting at 0.
+      Otherwise hfpll_Y where Y is more specific such as "l2".
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@f908a000 {
+        compatible = "qcom,msm8974-hfpll";
+        reg = <0xf908a000 0x30>, <0xf900a000 0x30>;
+        #clock-cells = <0>;
+        clock-output-names = "hfpll0";
+        clocks = <&xo_board>;
+        clock-names = "xo";
+    };

diff --git a/Bindings/clock/renesas,rzg2l-cpg.yaml b/Bindings/clock/renesas,rzg2l-cpg.yaml
index 80a8c71..4e3b0c4 100644
--- a/Bindings/clock/renesas,rzg2l-cpg.yaml
+++ b/Bindings/clock/renesas,rzg2l-cpg.yaml

@@ -57,7 +57,8 @@
       can be power-managed through Module Standby should refer to the CPG device
       node in their "power-domains" property, as documented by the generic PM
       Domain bindings in Documentation/devicetree/bindings/power/power-domain.yaml.
-    const: 0
+      The power domain specifiers defined in <dt-bindings/clock/r9a0*-cpg.h> could
+      be used to reference individual CPG power domains.
 
   '#reset-cells':
     description:
@@ -76,6 +77,21 @@
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a08g045-cpg
+    then:
+      properties:
+        '#power-domain-cells':
+          const: 1
+    else:
+      properties:
+        '#power-domain-cells':
+          const: 0
+
 examples:
   - |
     cpg: clock-controller@11010000 {

diff --git a/Bindings/clock/samsung,s3c6400-clock.yaml b/Bindings/clock/samsung,s3c6400-clock.yaml
new file mode 100644
index 0000000..0fcc0c9
--- /dev/null
+++ b/Bindings/clock/samsung,s3c6400-clock.yaml

@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,s3c6400-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C6400 SoC clock controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names and/or provided as clock inputs to this clock controller:
+   - "fin_pll" - PLL input clock (xtal/extclk) - required,
+   - "xusbxti" - USB xtal - required,
+   - "iiscdclk0" - I2S0 codec clock - optional,
+   - "iiscdclk1" - I2S1 codec clock - optional,
+   - "iiscdclk2" - I2S2 codec clock - optional,
+   - "pcmcdclk0" - PCM0 codec clock - optional,
+   - "pcmcdclk1" - PCM1 codec clock - optional, only S3C6410.
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/samsung,s3c64xx-clock.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c6400-clock
+      - samsung,s3c6410-clock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@7e00f000 {
+        compatible = "samsung,s3c6410-clock";
+        reg = <0x7e00f000 0x1000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>;
+    };

diff --git a/Bindings/clock/samsung,s3c64xx-clock.txt b/Bindings/clock/samsung,s3c64xx-clock.txt
deleted file mode 100644
index 872ee8e..0000000
--- a/Bindings/clock/samsung,s3c64xx-clock.txt
+++ /dev/null

@@ -1,76 +0,0 @@
-* Samsung S3C64xx Clock Controller
-
-The S3C64xx clock controller generates and supplies clock to various controllers
-within the SoC. The clock binding described here is applicable to all SoCs in
-the S3C64xx family.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "samsung,s3c6400-clock" - controller compatible with S3C6400 SoC.
-  - "samsung,s3c6410-clock" - controller compatible with S3C6410 SoC.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. Some of the clocks are available only
-on a particular S3C64xx SoC and this is specified where applicable.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/samsung,s3c64xx-clock.h header and can be used in device
-tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "fin_pll" - PLL input clock (xtal/extclk) - required,
- - "xusbxti" - USB xtal - required,
- - "iiscdclk0" - I2S0 codec clock - optional,
- - "iiscdclk1" - I2S1 codec clock - optional,
- - "iiscdclk2" - I2S2 codec clock - optional,
- - "pcmcdclk0" - PCM0 codec clock - optional,
- - "pcmcdclk1" - PCM1 codec clock - optional, only S3C6410.
-
-Example: Clock controller node:
-
-	clock: clock-controller@7e00f000 {
-		compatible = "samsung,s3c6410-clock";
-		reg = <0x7e00f000 0x1000>;
-		#clock-cells = <1>;
-	};
-
-Example: Required external clocks:
-
-	fin_pll: clock-fin-pll {
-		compatible = "fixed-clock";
-		clock-output-names = "fin_pll";
-		clock-frequency = <12000000>;
-		#clock-cells = <0>;
-	};
-
-	xusbxti: clock-xusbxti {
-		compatible = "fixed-clock";
-		clock-output-names = "xusbxti";
-		clock-frequency = <48000000>;
-		#clock-cells = <0>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller (refer to the standard clock bindings for information about
-  "clocks" and "clock-names" properties):
-
-		uart0: serial@7f005000 {
-			compatible = "samsung,s3c6400-uart";
-			reg = <0x7f005000 0x100>;
-			interrupt-parent = <&vic1>;
-			interrupts = <5>;
-			clock-names = "uart", "clk_uart_baud2",
-					"clk_uart_baud3";
-			clocks = <&clock PCLK_UART0>, <&clocks PCLK_UART0>,
-					<&clock SCLK_UART>;
-		};

diff --git a/Bindings/clock/sophgo,cv1800-clk.yaml b/Bindings/clock/sophgo,cv1800-clk.yaml
index c1dc246..59ef41a 100644
--- a/Bindings/clock/sophgo,cv1800-clk.yaml
+++ b/Bindings/clock/sophgo,cv1800-clk.yaml

@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/sophgo,cv1800-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Sophgo CV1800 Series Clock Controller
+title: Sophgo CV1800/SG2000 Series Clock Controller
 
 maintainers:
   - Inochi Amaoto <inochiama@outlook.com>
@@ -14,6 +14,7 @@
     enum:
       - sophgo,cv1800-clk
       - sophgo,cv1810-clk
+      - sophgo,sg2000-clk
 
   reg:
     maxItems: 1

diff --git a/Bindings/clock/st,stm32mp25-rcc.yaml b/Bindings/clock/st,stm32mp25-rcc.yaml
index 7732e79..88e52f1 100644
--- a/Bindings/clock/st,stm32mp25-rcc.yaml
+++ b/Bindings/clock/st,stm32mp25-rcc.yaml

@@ -38,14 +38,85 @@
       - description: CK_SCMI_MSI Low Power Internal oscillator (~ 4 MHz or ~ 16 MHz)
       - description: CK_SCMI_LSE Low Speed External oscillator (32 KHz)
       - description: CK_SCMI_LSI Low Speed Internal oscillator (~ 32 KHz)
+      - description: CK_SCMI_HSE_DIV2 CK_SCMI_HSE divided by 2 (coud be gated)
+      - description: CK_SCMI_ICN_HS_MCU High Speed interconnect bus clock
+      - description: CK_SCMI_ICN_LS_MCU Low Speed interconnect bus clock
+      - description: CK_SCMI_ICN_SDMMC SDMMC interconnect bus clock
+      - description: CK_SCMI_ICN_DDR DDR interconnect bus clock
+      - description: CK_SCMI_ICN_DISPLAY Display interconnect bus clock
+      - description: CK_SCMI_ICN_HSL HSL interconnect bus clock
+      - description: CK_SCMI_ICN_NIC NIC interconnect bus clock
+      - description: CK_SCMI_ICN_VID Video interconnect bus clock
+      - description: CK_SCMI_FLEXGEN_07 flexgen clock 7
+      - description: CK_SCMI_FLEXGEN_08 flexgen clock 8
+      - description: CK_SCMI_FLEXGEN_09 flexgen clock 9
+      - description: CK_SCMI_FLEXGEN_10 flexgen clock 10
+      - description: CK_SCMI_FLEXGEN_11 flexgen clock 11
+      - description: CK_SCMI_FLEXGEN_12 flexgen clock 12
+      - description: CK_SCMI_FLEXGEN_13 flexgen clock 13
+      - description: CK_SCMI_FLEXGEN_14 flexgen clock 14
+      - description: CK_SCMI_FLEXGEN_15 flexgen clock 15
+      - description: CK_SCMI_FLEXGEN_16 flexgen clock 16
+      - description: CK_SCMI_FLEXGEN_17 flexgen clock 17
+      - description: CK_SCMI_FLEXGEN_18 flexgen clock 18
+      - description: CK_SCMI_FLEXGEN_19 flexgen clock 19
+      - description: CK_SCMI_FLEXGEN_20 flexgen clock 20
+      - description: CK_SCMI_FLEXGEN_21 flexgen clock 21
+      - description: CK_SCMI_FLEXGEN_22 flexgen clock 22
+      - description: CK_SCMI_FLEXGEN_23 flexgen clock 23
+      - description: CK_SCMI_FLEXGEN_24 flexgen clock 24
+      - description: CK_SCMI_FLEXGEN_25 flexgen clock 25
+      - description: CK_SCMI_FLEXGEN_26 flexgen clock 26
+      - description: CK_SCMI_FLEXGEN_27 flexgen clock 27
+      - description: CK_SCMI_FLEXGEN_28 flexgen clock 28
+      - description: CK_SCMI_FLEXGEN_29 flexgen clock 29
+      - description: CK_SCMI_FLEXGEN_30 flexgen clock 30
+      - description: CK_SCMI_FLEXGEN_31 flexgen clock 31
+      - description: CK_SCMI_FLEXGEN_32 flexgen clock 32
+      - description: CK_SCMI_FLEXGEN_33 flexgen clock 33
+      - description: CK_SCMI_FLEXGEN_34 flexgen clock 34
+      - description: CK_SCMI_FLEXGEN_35 flexgen clock 35
+      - description: CK_SCMI_FLEXGEN_36 flexgen clock 36
+      - description: CK_SCMI_FLEXGEN_37 flexgen clock 37
+      - description: CK_SCMI_FLEXGEN_38 flexgen clock 38
+      - description: CK_SCMI_FLEXGEN_39 flexgen clock 39
+      - description: CK_SCMI_FLEXGEN_40 flexgen clock 40
+      - description: CK_SCMI_FLEXGEN_41 flexgen clock 41
+      - description: CK_SCMI_FLEXGEN_42 flexgen clock 42
+      - description: CK_SCMI_FLEXGEN_43 flexgen clock 43
+      - description: CK_SCMI_FLEXGEN_44 flexgen clock 44
+      - description: CK_SCMI_FLEXGEN_45 flexgen clock 45
+      - description: CK_SCMI_FLEXGEN_46 flexgen clock 46
+      - description: CK_SCMI_FLEXGEN_47 flexgen clock 47
+      - description: CK_SCMI_FLEXGEN_48 flexgen clock 48
+      - description: CK_SCMI_FLEXGEN_49 flexgen clock 49
+      - description: CK_SCMI_FLEXGEN_50 flexgen clock 50
+      - description: CK_SCMI_FLEXGEN_51 flexgen clock 51
+      - description: CK_SCMI_FLEXGEN_52 flexgen clock 52
+      - description: CK_SCMI_FLEXGEN_53 flexgen clock 53
+      - description: CK_SCMI_FLEXGEN_54 flexgen clock 54
+      - description: CK_SCMI_FLEXGEN_55 flexgen clock 55
+      - description: CK_SCMI_FLEXGEN_56 flexgen clock 56
+      - description: CK_SCMI_FLEXGEN_57 flexgen clock 57
+      - description: CK_SCMI_FLEXGEN_58 flexgen clock 58
+      - description: CK_SCMI_FLEXGEN_59 flexgen clock 59
+      - description: CK_SCMI_FLEXGEN_60 flexgen clock 60
+      - description: CK_SCMI_FLEXGEN_61 flexgen clock 61
+      - description: CK_SCMI_FLEXGEN_62 flexgen clock 62
+      - description: CK_SCMI_FLEXGEN_63 flexgen clock 63
+      - description: CK_SCMI_ICN_APB1 Peripheral bridge 1
+      - description: CK_SCMI_ICN_APB2 Peripheral bridge 2
+      - description: CK_SCMI_ICN_APB3 Peripheral bridge 3
+      - description: CK_SCMI_ICN_APB4 Peripheral bridge 4
+      - description: CK_SCMI_ICN_APBDBG Peripheral bridge for degub
+      - description: CK_SCMI_TIMG1 Peripheral bridge for timer1
+      - description: CK_SCMI_TIMG2 Peripheral bridge for timer2
+      - description: CK_SCMI_PLL3 PLL3 clock
+      - description: clk_dsi_txbyte DSI byte clock
 
-  clock-names:
-    items:
-      - const: hse
-      - const: hsi
-      - const: msi
-      - const: lse
-      - const: lsi
+  access-controllers:
+    minItems: 1
+    maxItems: 2
 
 required:
   - compatible
@@ -53,7 +124,6 @@
   - '#clock-cells'
   - '#reset-cells'
   - clocks
-  - clock-names
 
 additionalProperties: false
 
@@ -66,11 +136,85 @@
         reg = <0x44200000 0x10000>;
         #clock-cells = <1>;
         #reset-cells = <1>;
-        clock-names = "hse", "hsi", "msi", "lse", "lsi";
-        clocks = <&scmi_clk CK_SCMI_HSE>,
-                 <&scmi_clk CK_SCMI_HSI>,
-                 <&scmi_clk CK_SCMI_MSI>,
-                 <&scmi_clk CK_SCMI_LSE>,
-                 <&scmi_clk CK_SCMI_LSI>;
+        clocks =  <&scmi_clk CK_SCMI_HSE>,
+                  <&scmi_clk CK_SCMI_HSI>,
+                  <&scmi_clk CK_SCMI_MSI>,
+                  <&scmi_clk CK_SCMI_LSE>,
+                  <&scmi_clk CK_SCMI_LSI>,
+                  <&scmi_clk CK_SCMI_HSE_DIV2>,
+                  <&scmi_clk CK_SCMI_ICN_HS_MCU>,
+                  <&scmi_clk CK_SCMI_ICN_LS_MCU>,
+                  <&scmi_clk CK_SCMI_ICN_SDMMC>,
+                  <&scmi_clk CK_SCMI_ICN_DDR>,
+                  <&scmi_clk CK_SCMI_ICN_DISPLAY>,
+                  <&scmi_clk CK_SCMI_ICN_HSL>,
+                  <&scmi_clk CK_SCMI_ICN_NIC>,
+                  <&scmi_clk CK_SCMI_ICN_VID>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_07>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_08>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_09>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_10>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_11>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_12>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_13>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_14>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_15>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_16>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_17>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_18>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_19>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_20>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_21>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_22>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_23>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_24>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_25>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_26>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_27>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_28>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_29>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_30>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_31>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_32>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_33>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_34>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_35>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_36>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_37>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_38>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_39>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_40>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_41>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_42>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_43>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_44>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_45>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_46>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_47>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_48>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_49>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_50>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_51>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_52>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_53>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_54>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_55>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_56>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_57>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_58>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_59>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_60>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_61>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_62>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_63>,
+                  <&scmi_clk CK_SCMI_ICN_APB1>,
+                  <&scmi_clk CK_SCMI_ICN_APB2>,
+                  <&scmi_clk CK_SCMI_ICN_APB3>,
+                  <&scmi_clk CK_SCMI_ICN_APB4>,
+                  <&scmi_clk CK_SCMI_ICN_APBDBG>,
+                  <&scmi_clk CK_SCMI_TIMG1>,
+                  <&scmi_clk CK_SCMI_TIMG2>,
+                  <&scmi_clk CK_SCMI_PLL3>,
+                  <&clk_dsi_txbyte>;
     };
 ...

diff --git a/Bindings/cpufreq/cpufreq-qcom-hw.yaml b/Bindings/cpufreq/cpufreq-qcom-hw.yaml
index 56fc71d..1e9797f 100644
--- a/Bindings/cpufreq/cpufreq-qcom-hw.yaml
+++ b/Bindings/cpufreq/cpufreq-qcom-hw.yaml

@@ -38,6 +38,7 @@
               - qcom,sc7280-cpufreq-epss
               - qcom,sc8280xp-cpufreq-epss
               - qcom,sdx75-cpufreq-epss
+              - qcom,sm4450-cpufreq-epss
               - qcom,sm6375-cpufreq-epss
               - qcom,sm8250-cpufreq-epss
               - qcom,sm8350-cpufreq-epss
@@ -133,6 +134,7 @@
               - qcom,sc8280xp-cpufreq-epss
               - qcom,sdm670-cpufreq-hw
               - qcom,sdm845-cpufreq-hw
+              - qcom,sm4450-cpufreq-epss
               - qcom,sm6115-cpufreq-hw
               - qcom,sm6350-cpufreq-hw
               - qcom,sm6375-cpufreq-epss

diff --git a/Bindings/crypto/nvidia,tegra234-se-aes.yaml b/Bindings/crypto/nvidia,tegra234-se-aes.yaml
new file mode 100644
index 0000000..cb47ae2
--- /dev/null
+++ b/Bindings/crypto/nvidia,tegra234-se-aes.yaml

@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/nvidia,tegra234-se-aes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Security Engine for AES algorithms
+
+description:
+  The Tegra Security Engine accelerates the following AES encryption/decryption
+  algorithms - AES-ECB, AES-CBC, AES-OFB, AES-XTS, AES-CTR, AES-GCM, AES-CCM,
+  AES-CMAC
+
+maintainers:
+  - Akhil R <akhilrajeev@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra234-se-aes
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/memory/tegra234-mc.h>
+    #include <dt-bindings/clock/tegra234-clock.h>
+
+    crypto@15820000 {
+        compatible = "nvidia,tegra234-se-aes";
+        reg = <0x15820000 0x10000>;
+        clocks = <&bpmp TEGRA234_CLK_SE>;
+        iommus = <&smmu TEGRA234_SID_SES_SE1>;
+        dma-coherent;
+    };
+...

diff --git a/Bindings/crypto/nvidia,tegra234-se-hash.yaml b/Bindings/crypto/nvidia,tegra234-se-hash.yaml
new file mode 100644
index 0000000..f57ef10
--- /dev/null
+++ b/Bindings/crypto/nvidia,tegra234-se-hash.yaml

@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/nvidia,tegra234-se-hash.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Security Engine for HASH algorithms
+
+description:
+  The Tegra Security HASH Engine accelerates the following HASH functions -
+  SHA1, SHA224, SHA256, SHA384, SHA512, SHA3-224, SHA3-256, SHA3-384, SHA3-512
+  HMAC(SHA224), HMAC(SHA256), HMAC(SHA384), HMAC(SHA512)
+
+maintainers:
+  - Akhil R <akhilrajeev@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra234-se-hash
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/memory/tegra234-mc.h>
+    #include <dt-bindings/clock/tegra234-clock.h>
+
+    crypto@15840000 {
+        compatible = "nvidia,tegra234-se-hash";
+        reg = <0x15840000 0x10000>;
+        clocks = <&bpmp TEGRA234_CLK_SE>;
+        iommus = <&smmu TEGRA234_SID_SES_SE2>;
+        dma-coherent;
+    };
+...

diff --git a/Bindings/crypto/omap-sham.txt b/Bindings/crypto/omap-sham.txt
deleted file mode 100644
index ad91155..0000000
--- a/Bindings/crypto/omap-sham.txt
+++ /dev/null

@@ -1,28 +0,0 @@
-OMAP SoC SHA crypto Module
-
-Required properties:
-
-- compatible : Should contain entries for this and backward compatible
-  SHAM versions:
-  - "ti,omap2-sham" for OMAP2 & OMAP3.
-  - "ti,omap4-sham" for OMAP4 and AM33XX.
-  - "ti,omap5-sham" for OMAP5, DRA7 and AM43XX.
-- ti,hwmods: Name of the hwmod associated with the SHAM module
-- reg : Offset and length of the register set for the module
-- interrupts : the interrupt-specifier for the SHAM module.
-
-Optional properties:
-- dmas: DMA specifiers for the rx dma. See the DMA client binding,
-	Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: DMA request name. Should be "rx" if a dma is present.
-
-Example:
-	/* AM335x */
-	sham: sham@53100000 {
-		compatible = "ti,omap4-sham";
-		ti,hwmods = "sham";
-		reg = <0x53100000 0x200>;
-		interrupts = <109>;
-		dmas = <&edma 36>;
-		dma-names = "rx";
-	};

diff --git a/Bindings/crypto/qcom,inline-crypto-engine.yaml b/Bindings/crypto/qcom,inline-crypto-engine.yaml
index e91bc7d..0304f07 100644
--- a/Bindings/crypto/qcom,inline-crypto-engine.yaml
+++ b/Bindings/crypto/qcom,inline-crypto-engine.yaml

@@ -15,6 +15,7 @@
       - enum:
           - qcom,sa8775p-inline-crypto-engine
           - qcom,sc7180-inline-crypto-engine
+          - qcom,sc7280-inline-crypto-engine
           - qcom,sm8450-inline-crypto-engine
           - qcom,sm8550-inline-crypto-engine
           - qcom,sm8650-inline-crypto-engine

diff --git a/Bindings/crypto/st,stm32-cryp.yaml b/Bindings/crypto/st,stm32-cryp.yaml
index 0ddeb8a..2735465 100644
--- a/Bindings/crypto/st,stm32-cryp.yaml
+++ b/Bindings/crypto/st,stm32-cryp.yaml

@@ -46,6 +46,10 @@
   power-domains:
     maxItems: 1
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

diff --git a/Bindings/crypto/st,stm32-hash.yaml b/Bindings/crypto/st,stm32-hash.yaml
index ac48076..8223184 100644
--- a/Bindings/crypto/st,stm32-hash.yaml
+++ b/Bindings/crypto/st,stm32-hash.yaml

@@ -51,6 +51,10 @@
   power-domains:
     maxItems: 1
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

diff --git a/Bindings/crypto/starfive,jh7110-crypto.yaml b/Bindings/crypto/starfive,jh7110-crypto.yaml
index 71a2876..7ccb6e1 100644
--- a/Bindings/crypto/starfive,jh7110-crypto.yaml
+++ b/Bindings/crypto/starfive,jh7110-crypto.yaml

@@ -12,7 +12,9 @@
 
 properties:
   compatible:
-    const: starfive,jh7110-crypto
+    enum:
+      - starfive,jh7110-crypto
+      - starfive,jh8100-crypto
 
   reg:
     maxItems: 1
@@ -28,7 +30,10 @@
       - const: ahb
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: SHA2 module irq
+      - description: SM3 module irq
 
   resets:
     maxItems: 1
@@ -54,6 +59,27 @@
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: starfive,jh7110-crypto
+
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          const: starfive,jh8100-crypto
+
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+
 examples:
   - |
     crypto: crypto@16000000 {

diff --git a/Bindings/crypto/ti,omap-sham.yaml b/Bindings/crypto/ti,omap-sham.yaml
new file mode 100644
index 0000000..d69b502
--- /dev/null
+++ b/Bindings/crypto/ti,omap-sham.yaml

@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/ti,omap-sham.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP SoC SHA crypto Module
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,omap2-sham
+      - ti,omap4-sham
+      - ti,omap5-sham
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx
+
+  ti,hwmods:
+    description: Name of the hwmod associated with the SHAM module
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [sham]
+
+dependencies:
+  dmas: [dma-names]
+
+additionalProperties: false
+
+required:
+  - compatible
+  - ti,hwmods
+  - reg
+  - interrupts
+
+examples:
+  - |
+    sham@53100000 {
+        compatible = "ti,omap4-sham";
+        ti,hwmods = "sham";
+        reg = <0x53100000 0x200>;
+        interrupts = <109>;
+        dmas = <&edma 36>;
+        dma-names = "rx";
+    };

diff --git a/Bindings/display/atmel,lcdc-display.yaml b/Bindings/display/atmel,lcdc-display.yaml
new file mode 100644
index 0000000..a5cf040
--- /dev/null
+++ b/Bindings/display/atmel,lcdc-display.yaml

@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/atmel,lcdc-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip's LCDC Display
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Dharma Balasubiramani <dharma.b@microchip.com>
+
+description:
+  The LCD Controller (LCDC) consists of logic for transferring LCD image data
+  from an external display buffer to a TFT LCD panel. The LCDC has one display
+  input buffer per layer that fetches pixels through the single bus host
+  interface and a look-up table to allow palletized display configurations. The
+  LCDC is programmable on a per layer basis, and supports different LCD
+  resolutions, window sizes, image formats and pixel depths.
+
+# We need a select here since this schema is applicable only for nodes with the
+# following properties
+
+select:
+  anyOf:
+    - required: [ 'atmel,dmacon' ]
+    - required: [ 'atmel,lcdcon2' ]
+    - required: [ 'atmel,guard-time' ]
+
+properties:
+  atmel,dmacon:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: dma controller configuration
+
+  atmel,lcdcon2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: lcd controller configuration
+
+  atmel,guard-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: lcd guard time (Delay in frame periods)
+    maximum: 127
+
+  bits-per-pixel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: lcd panel bit-depth.
+    enum: [1, 2, 4, 8, 16, 24, 32]
+
+  atmel,lcdcon-backlight:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: enable backlight
+
+  atmel,lcdcon-backlight-inverted:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: invert backlight PWM polarity
+
+  atmel,lcd-wiring-mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: lcd wiring mode "RGB" or "BRG"
+    enum:
+      - RGB
+      - BRG
+
+  atmel,power-control-gpio:
+    description: gpio to power on or off the LCD (as many as needed)
+    maxItems: 1
+
+  display-timings:
+    $ref: panel/display-timings.yaml#
+
+required:
+  - atmel,dmacon
+  - atmel,lcdcon2
+  - atmel,guard-time
+  - bits-per-pixel
+
+additionalProperties: false
+
+examples:
+  - |
+    display: panel {
+      bits-per-pixel = <32>;
+      atmel,lcdcon-backlight;
+      atmel,dmacon = <0x1>;
+      atmel,lcdcon2 = <0x80008002>;
+      atmel,guard-time = <9>;
+      atmel,lcd-wiring-mode = "RGB";
+
+      display-timings {
+        native-mode = <&timing0>;
+        timing0: timing0 {
+          clock-frequency = <9000000>;
+          hactive = <480>;
+          vactive = <272>;
+          hback-porch = <1>;
+          hfront-porch = <1>;
+          vback-porch = <40>;
+          vfront-porch = <1>;
+          hsync-len = <45>;
+          vsync-len = <1>;
+        };
+      };
+    };

diff --git a/Bindings/display/atmel,lcdc.txt b/Bindings/display/atmel,lcdc.txt
deleted file mode 100644
index b5e355a..0000000
--- a/Bindings/display/atmel,lcdc.txt
+++ /dev/null

@@ -1,87 +0,0 @@
-Atmel LCDC Framebuffer
------------------------------------------------------
-
-Required properties:
-- compatible :
-	"atmel,at91sam9261-lcdc" , 
-	"atmel,at91sam9263-lcdc" ,
-	"atmel,at91sam9g10-lcdc" ,
-	"atmel,at91sam9g45-lcdc" ,
-	"atmel,at91sam9g45es-lcdc" ,
-	"atmel,at91sam9rl-lcdc" ,
-- reg : Should contain 1 register ranges(address and length).
-	Can contain an additional register range(address and length)
-	for fixed framebuffer memory. Useful for dedicated memories.
-- interrupts : framebuffer controller interrupt
-- display: a phandle pointing to the display node
-
-Required nodes:
-- display: a display node is required to initialize the lcd panel
-	This should be in the board dts.
-- default-mode: a videomode within the display with timing parameters
-	as specified below.
-
-Optional properties:
-- lcd-supply: Regulator for LCD supply voltage.
-
-Example:
-
-	fb0: fb@00500000 {
-		compatible = "atmel,at91sam9g45-lcdc";
-		reg = <0x00500000 0x1000>;
-		interrupts = <23 3 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_fb>;
-		display = <&display0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-	};
-
-Example for fixed framebuffer memory:
-
-	fb0: fb@00500000 {
-		compatible = "atmel,at91sam9263-lcdc";
-		reg = <0x00700000 0x1000 0x70000000 0x200000>;
-		[...]
-	};
-
-Atmel LCDC Display
------------------------------------------------------
-Required properties (as per of_videomode_helper):
-
- - atmel,dmacon: dma controller configuration
- - atmel,lcdcon2: lcd controller configuration
- - atmel,guard-time: lcd guard time (Delay in frame periods)
- - bits-per-pixel: lcd panel bit-depth.
-
-Optional properties (as per of_videomode_helper):
- - atmel,lcdcon-backlight: enable backlight
- - atmel,lcdcon-backlight-inverted: invert backlight PWM polarity
- - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG"
- - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed)
-
-Example:
-	display0: display {
-		bits-per-pixel = <32>;
-		atmel,lcdcon-backlight;
-		atmel,dmacon = <0x1>;
-		atmel,lcdcon2 = <0x80008002>;
-		atmel,guard-time = <9>;
-		atmel,lcd-wiring-mode = <1>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <9000000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <1>;
-				hfront-porch = <1>;
-				vback-porch = <40>;
-				vfront-porch = <1>;
-				hsync-len = <45>;
-				vsync-len = <1>;
-			};
-		};
-	};

diff --git a/Bindings/display/atmel,lcdc.yaml b/Bindings/display/atmel,lcdc.yaml
new file mode 100644
index 0000000..1b6f7e3
--- /dev/null
+++ b/Bindings/display/atmel,lcdc.yaml

@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/atmel,lcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip's LCDC Framebuffer
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Dharma Balasubiramani <dharma.b@microchip.com>
+
+description:
+  The LCDC works with a framebuffer, which is a section of memory that contains
+  a complete frame of data representing pixel values for the display. The LCDC
+  reads the pixel data from the framebuffer and sends it to the LCD panel to
+  render the image.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91sam9261-lcdc
+      - atmel,at91sam9263-lcdc
+      - atmel,at91sam9g10-lcdc
+      - atmel,at91sam9g45-lcdc
+      - atmel,at91sam9g45es-lcdc
+      - atmel,at91sam9rl-lcdc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: hclk
+      - const: lcdc_clk
+
+  display:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle pointing to the display node.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - display
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    fb@500000 {
+      compatible = "atmel,at91sam9g45-lcdc";
+      reg = <0x00500000 0x1000>;
+      interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&pinctrl_fb>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>;
+      clock-names = "hclk", "lcdc_clk";
+      display = <&display>;
+    };

diff --git a/Bindings/display/bridge/ite,it6505.yaml b/Bindings/display/bridge/ite,it6505.yaml
index c9a882e..c4469f4 100644
--- a/Bindings/display/bridge/ite,it6505.yaml
+++ b/Bindings/display/bridge/ite,it6505.yaml

@@ -9,6 +9,9 @@
 maintainers:
   - Allen Chen <allen.chen@ite.com.tw>
 
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
 description: |
   The IT6505 is a high-performance DisplayPort 1.1a transmitter,
   fully compliant with DisplayPort 1.1a, HDCP 1.3 specifications.
@@ -52,6 +55,9 @@
     maxItems: 1
     description: extcon specifier for the Power Delivery
 
+  "#sound-dai-cells":
+    const: 0
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -105,7 +111,7 @@
   - extcon
   - ports
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/display/bridge/lvds-codec.yaml b/Bindings/display/bridge/lvds-codec.yaml
index 84aafcb..6ceeed7 100644
--- a/Bindings/display/bridge/lvds-codec.yaml
+++ b/Bindings/display/bridge/lvds-codec.yaml

@@ -41,6 +41,7 @@
           - enum:
               - ti,ds90cf364a # For the DS90CF364A FPD-Link LVDS Receiver
               - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver
+              - ti,sn65lvds94 # For the SN65DS94 LVDS serdes
           - const: lvds-decoder # Generic LVDS decoders compatible fallback
       - enum:
           - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer

diff --git a/Bindings/display/bridge/microchip,sam9x75-lvds.yaml b/Bindings/display/bridge/microchip,sam9x75-lvds.yaml
new file mode 100644
index 0000000..862ef44
--- /dev/null
+++ b/Bindings/display/bridge/microchip,sam9x75-lvds.yaml

@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/microchip,sam9x75-lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip SAM9X75 LVDS Controller
+
+maintainers:
+  - Dharma Balasubiramani <dharma.b@microchip.com>
+
+description:
+  The Low Voltage Differential Signaling Controller (LVDSC) manages data
+  format conversion from the LCD Controller internal DPI bus to OpenLDI
+  LVDS output signals. LVDSC functions include bit mapping, balanced mode
+  management, and serializer.
+
+properties:
+  compatible:
+    const: microchip,sam9x75-lvds
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral Bus Clock
+
+  clock-names:
+    items:
+      - const: pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/at91.h>
+    lvds-controller@f8060000 {
+      compatible = "microchip,sam9x75-lvds";
+      reg = <0xf8060000 0x100>;
+      interrupts = <56 IRQ_TYPE_LEVEL_HIGH 0>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
+      clock-names = "pclk";
+    };

diff --git a/Bindings/display/bridge/toshiba,tc358775.yaml b/Bindings/display/bridge/toshiba,tc358775.yaml
index d879c70..258dd9c 100644
--- a/Bindings/display/bridge/toshiba,tc358775.yaml
+++ b/Bindings/display/bridge/toshiba,tc358775.yaml

@@ -10,7 +10,7 @@
   - Vinay Simha BN <simhavcs@gmail.com>
 
 description: |
-  This binding supports DSI to LVDS bridge TC358775
+  This binding supports DSI to LVDS bridges TC358765 and TC358775
 
   MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane.
   Video frame size:
@@ -21,7 +21,9 @@
 
 properties:
   compatible:
-    const: toshiba,tc358775
+    enum:
+      - toshiba,tc358765
+      - toshiba,tc358775
 
   reg:
     maxItems: 1
@@ -46,11 +48,27 @@
 
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description: |
           DSI Input. The remote endpoint phandle should be a
           reference to a valid mipi_dsi_host device node.
 
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description: |
@@ -70,10 +88,19 @@
   - reg
   - vdd-supply
   - vddio-supply
-  - stby-gpios
   - reset-gpios
   - ports
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: toshiba,tc358765
+    then:
+      properties:
+        stby-gpios: false
+
 additionalProperties: false
 
 examples:
@@ -108,6 +135,7 @@
                     reg = <0>;
                     d2l_in_test: endpoint {
                         remote-endpoint = <&dsi0_out>;
+                        data-lanes = <1 2 3 4>;
                     };
                 };
 
@@ -132,7 +160,6 @@
                 reg = <1>;
                 dsi0_out: endpoint {
                     remote-endpoint = <&d2l_in_test>;
-                    data-lanes = <0 1 2 3>;
                 };
              };
          };
@@ -167,6 +194,7 @@
                     reg = <0>;
                     d2l_in_dual: endpoint {
                         remote-endpoint = <&dsi0_out_dual>;
+                        data-lanes = <1 2 3 4>;
                     };
                 };
 
@@ -198,7 +226,6 @@
                 reg = <1>;
                 dsi0_out_dual: endpoint {
                     remote-endpoint = <&d2l_in_dual>;
-                    data-lanes = <0 1 2 3>;
                 };
              };
          };

diff --git a/Bindings/display/exynos/exynos_dp.txt b/Bindings/display/exynos/exynos_dp.txt
deleted file mode 100644
index 3a40159..0000000
--- a/Bindings/display/exynos/exynos_dp.txt
+++ /dev/null

@@ -1,112 +0,0 @@
-The Exynos display port interface should be configured based on
-the type of panel connected to it.
-
-We use two nodes:
-	-dp-controller node
-	-dptx-phy node(defined inside dp-controller node)
-
-For the DP-PHY initialization, we use the dptx-phy node.
-Required properties for dptx-phy: deprecated, use phys and phy-names
-	-reg: deprecated
-		Base address of DP PHY register.
-	-samsung,enable-mask: deprecated
-		The bit-mask used to enable/disable DP PHY.
-
-For the Panel initialization, we read data from dp-controller node.
-Required properties for dp-controller:
-	-compatible:
-		should be "samsung,exynos5-dp".
-	-reg:
-		physical base address of the controller and length
-		of memory mapped region.
-	-interrupts:
-		interrupt combiner values.
-	-clocks:
-		from common clock binding: handle to dp clock.
-	-clock-names:
-		from common clock binding: Shall be "dp".
-	-phys:
-		from general PHY binding: the phandle for the PHY device.
-	-phy-names:
-		from general PHY binding: Should be "dp".
-
-Optional properties for dp-controller:
-	-interlaced:
-		interlace scan mode.
-			Progressive if defined, Interlaced if not defined
-	-vsync-active-high:
-		VSYNC polarity configuration.
-			High if defined, Low if not defined
-	-hsync-active-high:
-		HSYNC polarity configuration.
-			High if defined, Low if not defined
-	-samsung,hpd-gpio:
-		Hotplug detect GPIO.
-			Indicates which GPIO should be used for hotplug
-			detection
-	-video interfaces: Device node can contain video interface port
-			nodes according to [1].
-	- display-timings: timings for the connected panel as described by
-		Documentation/devicetree/bindings/display/panel/display-timing.txt
-
-For the below properties, please refer to Analogix DP binding document:
- * Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
-	-phys (required)
-	-phy-names (required)
-	-hpd-gpios (optional)
-	 force-hpd (optional)
-
-Deprecated properties for DisplayPort:
--interlaced:            deprecated prop that can parsed from drm_display_mode.
--vsync-active-high:     deprecated prop that can parsed from drm_display_mode.
--hsync-active-high:     deprecated prop that can parsed from drm_display_mode.
--samsung,ycbcr-coeff:   deprecated prop that can parsed from drm_display_mode.
--samsung,dynamic-range: deprecated prop that can parsed from drm_display_mode.
--samsung,color-space:   deprecated prop that can parsed from drm_display_info.
--samsung,color-depth:   deprecated prop that can parsed from drm_display_info.
--samsung,link-rate:     deprecated prop that can reading from monitor by dpcd method.
--samsung,lane-count:    deprecated prop that can reading from monitor by dpcd method.
--samsung,hpd-gpio:      deprecated name for hpd-gpios.
-
--------------------------------------------------------------------------------
-
-Example:
-
-SOC specific portion:
-	dp-controller {
-		compatible = "samsung,exynos5-dp";
-		reg = <0x145b0000 0x10000>;
-		interrupts = <10 3>;
-		interrupt-parent = <&combiner>;
-		clocks = <&clock 342>;
-		clock-names = "dp";
-
-		phys = <&dp_phy>;
-		phy-names = "dp";
-	};
-
-Board Specific portion:
-	dp-controller {
-		display-timings {
-			native-mode = <&lcd_timing>;
-			lcd_timing: 1366x768 {
-				clock-frequency = <70589280>;
-				hactive = <1366>;
-				vactive = <768>;
-				hfront-porch = <40>;
-				hback-porch = <40>;
-				hsync-len = <32>;
-				vback-porch = <10>;
-				vfront-porch = <12>;
-				vsync-len = <6>;
-			};
-		};
-
-		ports {
-			port@0 {
-				dp_out: endpoint {
-					remote-endpoint = <&bridge_in>;
-				};
-			};
-		};
-	};

diff --git a/Bindings/display/mediatek/mediatek,gamma.yaml b/Bindings/display/mediatek/mediatek,gamma.yaml
index c6641ac..b8b8e83 100644
--- a/Bindings/display/mediatek/mediatek,gamma.yaml
+++ b/Bindings/display/mediatek/mediatek,gamma.yaml

@@ -24,6 +24,7 @@
       - enum:
           - mediatek,mt8173-disp-gamma
           - mediatek,mt8183-disp-gamma
+          - mediatek,mt8195-disp-gamma
       - items:
           - enum:
               - mediatek,mt6795-disp-gamma
@@ -35,6 +36,10 @@
               - mediatek,mt8192-disp-gamma
               - mediatek,mt8195-disp-gamma
           - const: mediatek,mt8183-disp-gamma
+      - items:
+          - enum:
+              - mediatek,mt8188-disp-gamma
+          - const: mediatek,mt8195-disp-gamma
 
   reg:
     maxItems: 1

diff --git a/Bindings/display/msm/dp-controller.yaml b/Bindings/display/msm/dp-controller.yaml
index ae53cbf..97993fe 100644
--- a/Bindings/display/msm/dp-controller.yaml
+++ b/Bindings/display/msm/dp-controller.yaml

@@ -29,6 +29,7 @@
           - qcom,sm8650-dp
       - items:
           - enum:
+              - qcom,sm6350-dp
               - qcom,sm8150-dp
               - qcom,sm8250-dp
               - qcom,sm8450-dp

diff --git a/Bindings/display/msm/qcom,sm6350-mdss.yaml b/Bindings/display/msm/qcom,sm6350-mdss.yaml
index c9ba1fa..bba666b 100644
--- a/Bindings/display/msm/qcom,sm6350-mdss.yaml
+++ b/Bindings/display/msm/qcom,sm6350-mdss.yaml

@@ -53,6 +53,15 @@
       compatible:
         const: qcom,sm6350-dpu
 
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        contains:
+          const: qcom,sm6350-dp
+
   "^dsi@[0-9a-f]+$":
     type: object
     additionalProperties: true

diff --git a/Bindings/display/panel/abt,y030xx067a.yaml b/Bindings/display/panel/abt,y030xx067a.yaml
index acd2f3f..0aa2d3f 100644
--- a/Bindings/display/panel/abt,y030xx067a.yaml
+++ b/Bindings/display/panel/abt,y030xx067a.yaml

@@ -17,10 +17,12 @@
   compatible:
     const: abt,y030xx067a
 
+  reg:
+    maxItems: 1
+
   backlight: true
   port: true
   power-supply: true
-  reg: true
   reset-gpios: true
 
 required:

diff --git a/Bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml b/Bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
index 75a09df..2399cab 100644
--- a/Bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
+++ b/Bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml

@@ -21,7 +21,10 @@
 properties:
   compatible:
     const: asus,z00t-tm5p5-n35596
-  reg: true
+
+  reg:
+    maxItems: 1
+
   reset-gpios: true
   vdd-supply:
     description: core voltage supply

diff --git a/Bindings/display/panel/boe,bf060y8m-aj0.yaml b/Bindings/display/panel/boe,bf060y8m-aj0.yaml
index a8f3afa..8b7448a 100644
--- a/Bindings/display/panel/boe,bf060y8m-aj0.yaml
+++ b/Bindings/display/panel/boe,bf060y8m-aj0.yaml

@@ -26,6 +26,9 @@
   compatible:
     const: boe,bf060y8m-aj0
 
+  reg:
+    maxItems: 1
+
   elvdd-supply:
     description: EL Driving positive (VDD) supply (4.40-4.80V)
   elvss-supply:
@@ -38,7 +41,6 @@
     description: I/O voltage supply (1.62-1.98V)
 
   port: true
-  reg: true
   reset-gpios: true
 
 required:

diff --git a/Bindings/display/panel/boe,himax8279d.yaml b/Bindings/display/panel/boe,himax8279d.yaml
index 272a3a0..f2496cd 100644
--- a/Bindings/display/panel/boe,himax8279d.yaml
+++ b/Bindings/display/panel/boe,himax8279d.yaml

@@ -18,9 +18,11 @@
       - const: boe,himax8279d8p
       - const: boe,himax8279d10p
 
+  reg:
+    maxItems: 1
+
   backlight: true
   enable-gpios: true
-  reg: true
 
   pp33-gpios:
     maxItems: 1

diff --git a/Bindings/display/panel/boe,th101mb31ig002-28a.yaml b/Bindings/display/panel/boe,th101mb31ig002-28a.yaml
index 32df26c..5eaccce 100644
--- a/Bindings/display/panel/boe,th101mb31ig002-28a.yaml
+++ b/Bindings/display/panel/boe,th101mb31ig002-28a.yaml

@@ -18,7 +18,9 @@
         # BOE TH101MB31IG002-28A 10.1" WXGA TFT LCD panel
       - boe,th101mb31ig002-28a
 
-  reg: true
+  reg:
+    maxItems: 1
+
   backlight: true
   enable-gpios: true
   power-supply: true

diff --git a/Bindings/display/panel/boe,tv101wum-nl6.yaml b/Bindings/display/panel/boe,tv101wum-nl6.yaml
index 906ef62..9e603ca 100644
--- a/Bindings/display/panel/boe,tv101wum-nl6.yaml
+++ b/Bindings/display/panel/boe,tv101wum-nl6.yaml

@@ -38,7 +38,7 @@
       - starry,ili9882t
 
   reg:
-    description: the virtual channel number of a DSI peripheral
+    maxItems: 1
 
   enable-gpios:
     description: a GPIO spec for the enable pin

diff --git a/Bindings/display/panel/elida,kd35t133.yaml b/Bindings/display/panel/elida,kd35t133.yaml
index 265ab6d..f4cb825 100644
--- a/Bindings/display/panel/elida,kd35t133.yaml
+++ b/Bindings/display/panel/elida,kd35t133.yaml

@@ -15,7 +15,10 @@
 properties:
   compatible:
     const: elida,kd35t133
-  reg: true
+
+  reg:
+    maxItems: 1
+
   backlight: true
   port: true
   reset-gpios: true

diff --git a/Bindings/display/panel/fascontek,fs035vg158.yaml b/Bindings/display/panel/fascontek,fs035vg158.yaml
index d13c4bd..9847da7 100644
--- a/Bindings/display/panel/fascontek,fs035vg158.yaml
+++ b/Bindings/display/panel/fascontek,fs035vg158.yaml

@@ -17,6 +17,9 @@
   compatible:
     const: fascontek,fs035vg158
 
+  reg:
+    maxItems: 1
+
   spi-3wire: true
 
 required:

diff --git a/Bindings/display/panel/feixin,k101-im2ba02.yaml b/Bindings/display/panel/feixin,k101-im2ba02.yaml
index 81adb82..0d8707a 100644
--- a/Bindings/display/panel/feixin,k101-im2ba02.yaml
+++ b/Bindings/display/panel/feixin,k101-im2ba02.yaml

@@ -15,7 +15,10 @@
 properties:
   compatible:
     const: feixin,k101-im2ba02
-  reg: true
+
+  reg:
+    maxItems: 1
+
   backlight: true
   reset-gpios: true
   avdd-supply:

diff --git a/Bindings/display/panel/himax,hx83112a.yaml b/Bindings/display/panel/himax,hx83112a.yaml
index 174661d..56bcd15 100644
--- a/Bindings/display/panel/himax,hx83112a.yaml
+++ b/Bindings/display/panel/himax,hx83112a.yaml

@@ -21,6 +21,9 @@
     contains:
       const: djn,9a-3r063-1102b
 
+  reg:
+    maxItems: 1
+
   vdd1-supply:
     description: Digital voltage rail
 
@@ -30,7 +33,6 @@
   vsp-supply:
     description: Negative source voltage rail
 
-  reg: true
   port: true
 
 required:

diff --git a/Bindings/display/panel/himax,hx8394.yaml b/Bindings/display/panel/himax,hx8394.yaml
index 916bb7f..644387e 100644
--- a/Bindings/display/panel/himax,hx8394.yaml
+++ b/Bindings/display/panel/himax,hx8394.yaml

@@ -26,7 +26,8 @@
           - powkiddy,x55-panel
       - const: himax,hx8394
 
-  reg: true
+  reg:
+    maxItems: 1
 
   reset-gpios: true
 

diff --git a/Bindings/display/panel/ilitek,ili9163.yaml b/Bindings/display/panel/ilitek,ili9163.yaml
index 3cabbba..ef5a224 100644
--- a/Bindings/display/panel/ilitek,ili9163.yaml
+++ b/Bindings/display/panel/ilitek,ili9163.yaml

@@ -24,6 +24,9 @@
           - newhaven,1.8-128160EF
       - const: ilitek,ili9163
 
+  reg:
+    maxItems: 1
+
   spi-max-frequency:
     maximum: 32000000
 
@@ -32,7 +35,6 @@
     description: Display data/command selection (D/CX)
 
   backlight: true
-  reg: true
   reset-gpios: true
   rotation: true
 

diff --git a/Bindings/display/panel/ilitek,ili9322.yaml b/Bindings/display/panel/ilitek,ili9322.yaml
index 7d221ef..4442346 100644
--- a/Bindings/display/panel/ilitek,ili9322.yaml
+++ b/Bindings/display/panel/ilitek,ili9322.yaml

@@ -26,6 +26,9 @@
           - dlink,dir-685-panel
       - const: ilitek,ili9322
 
+  reg:
+    maxItems: 1
+
   reset-gpios: true
   port: true
 

diff --git a/Bindings/display/panel/ilitek,ili9341.yaml b/Bindings/display/panel/ilitek,ili9341.yaml
index 94f169e..5f41758 100644
--- a/Bindings/display/panel/ilitek,ili9341.yaml
+++ b/Bindings/display/panel/ilitek,ili9341.yaml

@@ -28,7 +28,8 @@
           - canaan,kd233-tft
       - const: ilitek,ili9341
 
-  reg: true
+  reg:
+    maxItems: 1
 
   dc-gpios:
     maxItems: 1

diff --git a/Bindings/display/panel/ilitek,ili9805.yaml b/Bindings/display/panel/ilitek,ili9805.yaml
index f4f91f9..ff67129 100644
--- a/Bindings/display/panel/ilitek,ili9805.yaml
+++ b/Bindings/display/panel/ilitek,ili9805.yaml

@@ -20,9 +20,11 @@
           - tianma,tm041xdhg01
       - const: ilitek,ili9805
 
+  reg:
+    maxItems: 1
+
   avdd-supply: true
   dvdd-supply: true
-  reg: true
 
 required:
   - compatible

diff --git a/Bindings/display/panel/ilitek,ili9881c.yaml b/Bindings/display/panel/ilitek,ili9881c.yaml
index b1e624b..baf5dfe 100644
--- a/Bindings/display/panel/ilitek,ili9881c.yaml
+++ b/Bindings/display/panel/ilitek,ili9881c.yaml

@@ -19,13 +19,16 @@
           - ampire,am8001280g
           - bananapi,lhr050h41
           - feixin,k101-im2byl02
+          - startek,kd050hdfia020
           - tdo,tl050hdv35
           - wanchanglong,w552946aba
       - const: ilitek,ili9881c
 
+  reg:
+    maxItems: 1
+
   backlight: true
   power-supply: true
-  reg: true
   reset-gpios: true
   rotation: true
 

diff --git a/Bindings/display/panel/innolux,ej030na.yaml b/Bindings/display/panel/innolux,ej030na.yaml
index 72788e3..c7df9a7 100644
--- a/Bindings/display/panel/innolux,ej030na.yaml
+++ b/Bindings/display/panel/innolux,ej030na.yaml

@@ -17,10 +17,12 @@
   compatible:
     const: innolux,ej030na
 
+  reg:
+    maxItems: 1
+
   backlight: true
   port: true
   power-supply: true
-  reg: true
   reset-gpios: true
 
 required:

diff --git a/Bindings/display/panel/innolux,p097pfg.yaml b/Bindings/display/panel/innolux,p097pfg.yaml
index 5a5f071..4164e3f 100644
--- a/Bindings/display/panel/innolux,p097pfg.yaml
+++ b/Bindings/display/panel/innolux,p097pfg.yaml

@@ -16,9 +16,11 @@
   compatible:
     const: innolux,p097pfg
 
+  reg:
+    maxItems: 1
+
   backlight: true
   enable-gpios: true
-  reg: true
 
   avdd-supply:
     description: The regulator that provides positive voltage

diff --git a/Bindings/display/panel/jadard,jd9365da-h3.yaml b/Bindings/display/panel/jadard,jd9365da-h3.yaml
index 41eb7fb..20afdb4 100644
--- a/Bindings/display/panel/jadard,jd9365da-h3.yaml
+++ b/Bindings/display/panel/jadard,jd9365da-h3.yaml

@@ -21,7 +21,8 @@
           - radxa,display-8hd-ad002
       - const: jadard,jd9365da-h3
 
-  reg: true
+  reg:
+    maxItems: 1
 
   vdd-supply:
     description: supply regulator for VDD, usually 3.3V

diff --git a/Bindings/display/panel/jdi,lpm102a188a.yaml b/Bindings/display/panel/jdi,lpm102a188a.yaml
index 2f4d27a..a862145 100644
--- a/Bindings/display/panel/jdi,lpm102a188a.yaml
+++ b/Bindings/display/panel/jdi,lpm102a188a.yaml

@@ -26,7 +26,9 @@
   compatible:
     const: jdi,lpm102a188a
 
-  reg: true
+  reg:
+    maxItems: 1
+
   enable-gpios: true
   reset-gpios: true
   power-supply: true

diff --git a/Bindings/display/panel/jdi,lt070me05000.yaml b/Bindings/display/panel/jdi,lt070me05000.yaml
index 63c82a4..0c8b5cb 100644
--- a/Bindings/display/panel/jdi,lt070me05000.yaml
+++ b/Bindings/display/panel/jdi,lt070me05000.yaml

@@ -16,8 +16,10 @@
   compatible:
     const: jdi,lt070me05000
 
+  reg:
+    maxItems: 1
+
   enable-gpios: true
-  reg: true
   reset-gpios: true
 
   vddp-supply:

diff --git a/Bindings/display/panel/kingdisplay,kd035g6-54nt.yaml b/Bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
index b4be9bd..d86c916 100644
--- a/Bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
+++ b/Bindings/display/panel/kingdisplay,kd035g6-54nt.yaml

@@ -17,10 +17,12 @@
   compatible:
     const: kingdisplay,kd035g6-54nt
 
+  reg:
+    maxItems: 1
+
   backlight: true
   port: true
   power-supply: true
-  reg: true
   reset-gpios: true
 
   spi-3wire: true

diff --git a/Bindings/display/panel/leadtek,ltk035c5444t.yaml b/Bindings/display/panel/leadtek,ltk035c5444t.yaml
index 7a55961..b5dc02b 100644
--- a/Bindings/display/panel/leadtek,ltk035c5444t.yaml
+++ b/Bindings/display/panel/leadtek,ltk035c5444t.yaml

@@ -18,6 +18,9 @@
   compatible:
     const: leadtek,ltk035c5444t
 
+  reg:
+    maxItems: 1
+
   spi-3wire: true
 
 required:

diff --git a/Bindings/display/panel/leadtek,ltk050h3146w.yaml b/Bindings/display/panel/leadtek,ltk050h3146w.yaml
index a40ab88..e2a2dd4 100644
--- a/Bindings/display/panel/leadtek,ltk050h3146w.yaml
+++ b/Bindings/display/panel/leadtek,ltk050h3146w.yaml

@@ -18,7 +18,10 @@
       - leadtek,ltk050h3146w
       - leadtek,ltk050h3146w-a2
       - leadtek,ltk050h3148w
-  reg: true
+
+  reg:
+    maxItems: 1
+
   backlight: true
   reset-gpios: true
   iovcc-supply:

diff --git a/Bindings/display/panel/leadtek,ltk500hd1829.yaml b/Bindings/display/panel/leadtek,ltk500hd1829.yaml
index d589f16..af9e0ea 100644
--- a/Bindings/display/panel/leadtek,ltk500hd1829.yaml
+++ b/Bindings/display/panel/leadtek,ltk500hd1829.yaml

@@ -17,7 +17,10 @@
     enum:
       - leadtek,ltk101b4029w
       - leadtek,ltk500hd1829
-  reg: true
+
+  reg:
+    maxItems: 1
+
   backlight: true
   reset-gpios: true
   iovcc-supply:

diff --git a/Bindings/display/panel/lg,lg4573.yaml b/Bindings/display/panel/lg,lg4573.yaml
index ee357e1..590ccc2 100644
--- a/Bindings/display/panel/lg,lg4573.yaml
+++ b/Bindings/display/panel/lg,lg4573.yaml

@@ -21,7 +21,8 @@
   compatible:
     const: lg,lg4573
 
-  reg: true
+  reg:
+    maxItems: 1
 
 required:
   - compatible

diff --git a/Bindings/display/panel/lg,sw43408.yaml b/Bindings/display/panel/lg,sw43408.yaml
new file mode 100644
index 0000000..1e08648
--- /dev/null
+++ b/Bindings/display/panel/lg,sw43408.yaml

@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lg,sw43408.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LG SW43408 1080x2160 DSI panel
+
+maintainers:
+  - Caleb Connolly <caleb.connolly@linaro.org>
+
+description:
+  This panel is used on the Pixel 3, it is a 60hz OLED panel which
+  required DSC (Display Stream Compression) and has rounded corners.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: lg,sw43408
+
+  reg: true
+  port: true
+  vddi-supply: true
+  vpnl-supply: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - vddi-supply
+  - vpnl-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "lg,sw43408";
+            reg = <0>;
+
+            vddi-supply = <&vreg_l14a_1p88>;
+            vpnl-supply = <&vreg_l28a_3p0>;
+
+            reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&mdss_dsi0_out>;
+                };
+            };
+        };
+    };
+...

diff --git a/Bindings/display/panel/lgphilips,lb035q02.yaml b/Bindings/display/panel/lgphilips,lb035q02.yaml
index 628c4b8..3de17fd 100644
--- a/Bindings/display/panel/lgphilips,lb035q02.yaml
+++ b/Bindings/display/panel/lgphilips,lb035q02.yaml

@@ -17,6 +17,9 @@
   compatible:
     const: lgphilips,lb035q02
 
+  reg:
+    maxItems: 1
+
   label: true
   enable-gpios: true
   port: true

diff --git a/Bindings/display/panel/nec,nl8048hl11.yaml b/Bindings/display/panel/nec,nl8048hl11.yaml
index accf933..1cffe4d 100644
--- a/Bindings/display/panel/nec,nl8048hl11.yaml
+++ b/Bindings/display/panel/nec,nl8048hl11.yaml

@@ -21,9 +21,11 @@
   compatible:
     const: nec,nl8048hl11
 
+  reg:
+    maxItems: 1
+
   label: true
   port: true
-  reg: true
   reset-gpios: true
 
   spi-max-frequency:

diff --git a/Bindings/display/panel/newvision,nv3051d.yaml b/Bindings/display/panel/newvision,nv3051d.yaml
index 7a634fb..d3a25a8 100644
--- a/Bindings/display/panel/newvision,nv3051d.yaml
+++ b/Bindings/display/panel/newvision,nv3051d.yaml

@@ -24,7 +24,9 @@
           - powkiddy,rk2023-panel
       - const: newvision,nv3051d
 
-  reg: true
+  reg:
+    maxItems: 1
+
   backlight: true
   port: true
   reset-gpios:

diff --git a/Bindings/display/panel/novatek,nt35510.yaml b/Bindings/display/panel/novatek,nt35510.yaml
index 91921f4..bb50fd5 100644
--- a/Bindings/display/panel/novatek,nt35510.yaml
+++ b/Bindings/display/panel/novatek,nt35510.yaml

@@ -24,7 +24,10 @@
       string determines how the NT35510 panel driver shall be configured
       to work with the indicated panel. The novatek,nt35510 compatible shall
       always be provided as a fallback.
-  reg: true
+
+  reg:
+    maxItems: 1
+
   reset-gpios: true
   vdd-supply:
     description: regulator that supplies the vdd voltage

diff --git a/Bindings/display/panel/novatek,nt35950.yaml b/Bindings/display/panel/novatek,nt35950.yaml
index 377a05d..a9e4049 100644
--- a/Bindings/display/panel/novatek,nt35950.yaml
+++ b/Bindings/display/panel/novatek,nt35950.yaml

@@ -19,7 +19,7 @@
   either bilinear interpolation or pixel duplication.
 
 allOf:
-  - $ref: panel-common.yaml#
+  - $ref: panel-common-dual.yaml#
 
 properties:
   compatible:
@@ -33,6 +33,9 @@
       to work with the indicated panel. The novatek,nt35950 compatible shall
       always be provided as a fallback.
 
+  reg:
+    maxItems: 1
+
   reset-gpios:
     maxItems: 1
     description: phandle of gpio for reset line - This should be 8mA, gpio
@@ -49,7 +52,6 @@
 
   backlight: true
   ports: true
-  reg: true
 
 required:
   - compatible
@@ -59,6 +61,7 @@
   - avee-supply
   - dvdd-supply
   - vddio-supply
+  - ports
 
 additionalProperties: false
 

diff --git a/Bindings/display/panel/novatek,nt36523.yaml b/Bindings/display/panel/novatek,nt36523.yaml
index 5f7e4c4..c4bae4f 100644
--- a/Bindings/display/panel/novatek,nt36523.yaml
+++ b/Bindings/display/panel/novatek,nt36523.yaml

@@ -14,9 +14,6 @@
   panels. Support video mode panels from China Star Optoelectronics
   Technology (CSOT) and BOE Technology.
 
-allOf:
-  - $ref: panel-common.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -30,6 +27,9 @@
               - lenovo,j606f-boe-nt36523w
           - const: novatek,nt36523w
 
+  reg:
+    maxItems: 1
+
   reset-gpios:
     maxItems: 1
     description: phandle of gpio for reset line - This should be 8mA
@@ -37,8 +37,6 @@
   vddio-supply:
     description: regulator that supplies the I/O voltage
 
-  reg: true
-  ports: true
   rotation: true
   backlight: true
 
@@ -47,7 +45,26 @@
   - reg
   - vddio-supply
   - reset-gpios
-  - ports
+
+allOf:
+  - $ref: panel-common-dual.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - novatek,nt36523w
+    then:
+      properties:
+        ports:
+          properties:
+            port@1: false
+    else:
+      properties:
+        port: false
+        ports:
+          required:
+            - port@1
 
 unevaluatedProperties: false
 

diff --git a/Bindings/display/panel/novatek,nt36672a.yaml b/Bindings/display/panel/novatek,nt36672a.yaml
index ae821f4..800a2f0 100644
--- a/Bindings/display/panel/novatek,nt36672a.yaml
+++ b/Bindings/display/panel/novatek,nt36672a.yaml

@@ -29,6 +29,9 @@
       determines how the NT36672A panel driver is configured for the indicated
       panel. The novatek,nt36672a compatible shall always be provided as a fallback.
 
+  reg:
+    maxItems: 1
+
   reset-gpios:
     maxItems: 1
     description: phandle of gpio for reset line - This should be 8mA, gpio
@@ -44,7 +47,6 @@
   vddneg-supply:
     description: phandle of the negative boost supply regulator
 
-  reg: true
   port: true
   backlight: true
 

diff --git a/Bindings/display/panel/olimex,lcd-olinuxino.yaml b/Bindings/display/panel/olimex,lcd-olinuxino.yaml
index 7246379..e5d8785 100644
--- a/Bindings/display/panel/olimex,lcd-olinuxino.yaml
+++ b/Bindings/display/panel/olimex,lcd-olinuxino.yaml

@@ -38,10 +38,12 @@
   compatible:
     const: olimex,lcd-olinuxino
 
+  reg:
+    maxItems: 1
+
   backlight: true
   enable-gpios: true
   power-supply: true
-  reg: true
 
 required:
   - compatible

diff --git a/Bindings/display/panel/panel-common-dual.yaml b/Bindings/display/panel/panel-common-dual.yaml
new file mode 100644
index 0000000..cc7ea3c
--- /dev/null
+++ b/Bindings/display/panel/panel-common-dual.yaml

@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-common-dual.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Dual-Link Display Panels
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description:
+  Properties common for Panel IC supporting dual link panels.  Devices might
+  support also single link.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: First link
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Second link
+
+      "#address-cells": true
+      "#size-cells": true
+
+    required:
+      - port@0
+
+# Single-panel setups are still allowed.
+oneOf:
+  - required:
+      - ports
+  - required:
+      - port
+
+additionalProperties: true

diff --git a/Bindings/display/panel/panel-mipi-dbi-spi.yaml b/Bindings/display/panel/panel-mipi-dbi-spi.yaml
index e808215..d0ac31a 100644
--- a/Bindings/display/panel/panel-mipi-dbi-spi.yaml
+++ b/Bindings/display/panel/panel-mipi-dbi-spi.yaml

@@ -71,6 +71,9 @@
           - shineworld,lh133k
       - const: panel-mipi-dbi-spi
 
+  reg:
+    maxItems: 1
+
   write-only:
     type: boolean
     description:

diff --git a/Bindings/display/panel/panel-simple-dsi.yaml b/Bindings/display/panel/panel-simple-dsi.yaml
index f9160d7..db5acd2 100644
--- a/Bindings/display/panel/panel-simple-dsi.yaml
+++ b/Bindings/display/panel/panel-simple-dsi.yaml

@@ -36,6 +36,8 @@
       - jdi,fhd-r63452
         # Khadas TS050 5" 1080x1920 LCD panel
       - khadas,ts050
+        # Khadas TS050 V2 5" 1080x1920 LCD panel
+      - khadas,ts050v2
         # Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel
       - kingdisplay,kd097d04
         # LG ACX467AKM-7 4.95" 1080×1920 LCD Panel
@@ -50,6 +52,8 @@
       - panasonic,vvx10f004b00
         # Panasonic 10" WUXGA TFT LCD panel
       - panasonic,vvx10f034n00
+        # Samsung s6e3fa7 1080x2220 based AMS559NK06 AMOLED panel
+      - samsung,s6e3fa7-ams559nk06
         # Samsung s6e3fc2x01 1080x2340 AMOLED panel
       - samsung,s6e3fc2x01
         # Samsung sofef00 1080x2280 AMOLED panel

diff --git a/Bindings/display/panel/panel-simple.yaml b/Bindings/display/panel/panel-simple.yaml
index a95445f..5067f5c 100644
--- a/Bindings/display/panel/panel-simple.yaml
+++ b/Bindings/display/panel/panel-simple.yaml

@@ -91,6 +91,8 @@
       - boe,nv133fhm-n62
         # BOE NV140FHM-N49 14.0" FHD a-Si FT panel
       - boe,nv140fhmn49
+        # Crystal Clear Technology CMT430B19N00 4.3" 480x272 TFT-LCD panel
+      - cct,cmt430b19n00
         # CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel
       - cdtech,s043wq26h-ct7
         # CDTech(H.K.) Electronics Limited 7" WSVGA (1024x600) TFT LCD Panel
@@ -188,6 +190,8 @@
       - innolux,g121i1-l01
         # Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel
       - innolux,g121x1-l03
+        # Innolux Corporation 12.1" G121XCE-L01 XGA (1024x768) TFT LCD panel
+      - innolux,g121xce-l01
         # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
       - innolux,n116bca-ea1
         # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
@@ -272,6 +276,8 @@
       - osddisplays,osd070t1718-19ts
         # One Stop Displays OSD101T2045-53TS 10.1" 1920x1200 panel
       - osddisplays,osd101t2045-53ts
+        # POWERTIP PH128800T006-ZHC01 10.1" WXGA TFT LCD panel
+      - powertip,ph128800t006-zhc01
         # POWERTIP PH800480T013-IDF2 7.0" WVGA TFT LCD panel
       - powertip,ph800480t013-idf02
         # QiaoDian XianShi Corporation 4"3 TFT LCD panel
@@ -348,15 +354,6 @@
         # Yes Optoelectronics YTC700TLAG-05-201C 7" TFT LCD panel
       - yes-optoelectronics,ytc700tlag-05-201c
 
-  backlight: true
-  ddc-i2c-bus: true
-  enable-gpios: true
-  port: true
-  power-supply: true
-  no-hpd: true
-  hpd-gpios: true
-  data-mapping: true
-
 if:
   not:
     properties:
@@ -367,7 +364,7 @@
   properties:
     data-mapping: false
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible

diff --git a/Bindings/display/panel/raydium,rm67191.yaml b/Bindings/display/panel/raydium,rm67191.yaml
index d62fd69..4825792 100644
--- a/Bindings/display/panel/raydium,rm67191.yaml
+++ b/Bindings/display/panel/raydium,rm67191.yaml

@@ -16,7 +16,9 @@
   compatible:
     const: raydium,rm67191
 
-  reg: true
+  reg:
+    maxItems: 1
+
   port: true
   reset-gpios: true
   width-mm: true

diff --git a/Bindings/display/panel/raydium,rm692e5.yaml b/Bindings/display/panel/raydium,rm692e5.yaml
index f436ba6..7ad223f 100644
--- a/Bindings/display/panel/raydium,rm692e5.yaml
+++ b/Bindings/display/panel/raydium,rm692e5.yaml

@@ -22,6 +22,9 @@
       - const: fairphone,fp5-rm692e5-boe
       - const: raydium,rm692e5
 
+  reg:
+    maxItems: 1
+
   dvdd-supply:
     description: Digital voltage rail
 
@@ -31,7 +34,6 @@
   vddio-supply:
     description: I/O voltage rail
 
-  reg: true
   port: true
 
 required:

diff --git a/Bindings/display/panel/raydium,rm69380.yaml b/Bindings/display/panel/raydium,rm69380.yaml
new file mode 100644
index 0000000..b17765b
--- /dev/null
+++ b/Bindings/display/panel/raydium,rm69380.yaml

@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raydium,rm69380.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raydium RM69380-based DSI display panels
+
+maintainers:
+  - David Wronek <david@mainlining.org>
+
+description:
+  The Raydium RM69380 is a generic DSI panel IC used to control
+  OLED panels.
+
+allOf:
+  - $ref: panel-common-dual.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - lenovo,j716f-edo-rm69380
+      - const: raydium,rm69380
+    description: This indicates the panel manufacturer of the panel
+      that is in turn using the RM69380 panel driver. The compatible
+      string determines how the RM69380 panel driver shall be configured
+      to work with the indicated panel. The raydium,rm69380 compatible shall
+      always be provided as a fallback.
+
+  avdd-supply:
+    description: Analog voltage rail
+
+  vddio-supply:
+    description: I/O voltage rail
+
+  reset-gpios:
+    maxItems: 1
+    description: phandle of gpio for reset line - This should be active low
+
+  reg: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - vddio-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "lenovo,j716f-edo-rm69380", "raydium,rm69380";
+            reg = <0>;
+
+            avdd-supply = <&panel_avdd_regulator>;
+            vddio-supply = <&vreg_l14a>;
+            reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    panel_in_0: endpoint {
+                        remote-endpoint = <&mdss_dsi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    panel_in_1: endpoint {
+                        remote-endpoint = <&mdss_dsi1_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...

diff --git a/Bindings/display/panel/rocktech,jh057n00900.yaml b/Bindings/display/panel/rocktech,jh057n00900.yaml
index 6ec4712..4ae152c 100644
--- a/Bindings/display/panel/rocktech,jh057n00900.yaml
+++ b/Bindings/display/panel/rocktech,jh057n00900.yaml

@@ -22,6 +22,8 @@
     enum:
       # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel
       - anbernic,rg353v-panel-v2
+      # GameForce Chi 3.5" 640x480 TFT LCD panel
+      - gameforce,chi-panel
       # Powkiddy RGB10MAX3 5.0" 720x1280 TFT LCD panel
       - powkiddy,rgb10max3-panel
       # Powkiddy RGB30 3.0" 720x720 TFT LCD panel

diff --git a/Bindings/display/panel/ronbo,rb070d30.yaml b/Bindings/display/panel/ronbo,rb070d30.yaml
index 95ce22c..04f86e0 100644
--- a/Bindings/display/panel/ronbo,rb070d30.yaml
+++ b/Bindings/display/panel/ronbo,rb070d30.yaml

@@ -14,7 +14,7 @@
     const: ronbo,rb070d30
 
   reg:
-    description: MIPI-DSI virtual channel
+    maxItems: 1
 
   power-gpios:
     description: GPIO used for the power pin

diff --git a/Bindings/display/panel/samsung,amoled-mipi-dsi.yaml b/Bindings/display/panel/samsung,amoled-mipi-dsi.yaml
index ccc4825..e8f9e9d 100644
--- a/Bindings/display/panel/samsung,amoled-mipi-dsi.yaml
+++ b/Bindings/display/panel/samsung,amoled-mipi-dsi.yaml

@@ -33,7 +33,9 @@
         # Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel
       - samsung,s6e3hf2
 
-  reg: true
+  reg:
+    maxItems: 1
+
   reset-gpios: true
   enable-gpios: true
   te-gpios: true

diff --git a/Bindings/display/panel/samsung,ams495qa01.yaml b/Bindings/display/panel/samsung,ams495qa01.yaml
index 58fa073..e081c84 100644
--- a/Bindings/display/panel/samsung,ams495qa01.yaml
+++ b/Bindings/display/panel/samsung,ams495qa01.yaml

@@ -11,12 +11,15 @@
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
     const: samsung,ams495qa01
 
-  reg: true
+  reg:
+    maxItems: 1
+
   reset-gpios:
     description: reset gpio, must be GPIO_ACTIVE_LOW
   elvdd-supply:

diff --git a/Bindings/display/panel/samsung,ld9040.yaml b/Bindings/display/panel/samsung,ld9040.yaml
index c0fabeb..bc92b16 100644
--- a/Bindings/display/panel/samsung,ld9040.yaml
+++ b/Bindings/display/panel/samsung,ld9040.yaml

@@ -17,9 +17,11 @@
   compatible:
     const: samsung,ld9040
 
+  reg:
+    maxItems: 1
+
   display-timings: true
   port: true
-  reg: true
   reset-gpios: true
 
   vdd3-supply:

diff --git a/Bindings/display/panel/samsung,lms380kf01.yaml b/Bindings/display/panel/samsung,lms380kf01.yaml
index 70ffc88..7ce8540 100644
--- a/Bindings/display/panel/samsung,lms380kf01.yaml
+++ b/Bindings/display/panel/samsung,lms380kf01.yaml

@@ -21,7 +21,8 @@
   compatible:
     const: samsung,lms380kf01
 
-  reg: true
+  reg:
+    maxItems: 1
 
   interrupts:
     description: provides an optional ESD (electrostatic discharge)

diff --git a/Bindings/display/panel/samsung,lms397kf04.yaml b/Bindings/display/panel/samsung,lms397kf04.yaml
index 5e77cee..9363032 100644
--- a/Bindings/display/panel/samsung,lms397kf04.yaml
+++ b/Bindings/display/panel/samsung,lms397kf04.yaml

@@ -20,7 +20,8 @@
   compatible:
     const: samsung,lms397kf04
 
-  reg: true
+  reg:
+    maxItems: 1
 
   reset-gpios: true
 

diff --git a/Bindings/display/panel/samsung,s6d16d0.yaml b/Bindings/display/panel/samsung,s6d16d0.yaml
index 66d1474..2af5bc4 100644
--- a/Bindings/display/panel/samsung,s6d16d0.yaml
+++ b/Bindings/display/panel/samsung,s6d16d0.yaml

@@ -16,8 +16,10 @@
   compatible:
     const: samsung,s6d16d0
 
+  reg:
+    maxItems: 1
+
   port: true
-  reg: true
   reset-gpios: true
 
   vdd1-supply:

diff --git a/Bindings/display/panel/samsung,s6d27a1.yaml b/Bindings/display/panel/samsung,s6d27a1.yaml
index d273faf..d749041 100644
--- a/Bindings/display/panel/samsung,s6d27a1.yaml
+++ b/Bindings/display/panel/samsung,s6d27a1.yaml

@@ -20,7 +20,8 @@
   compatible:
     const: samsung,s6d27a1
 
-  reg: true
+  reg:
+    maxItems: 1
 
   interrupts:
     description: provides an optional ESD (electrostatic discharge)

diff --git a/Bindings/display/panel/samsung,s6d7aa0.yaml b/Bindings/display/panel/samsung,s6d7aa0.yaml
index 45a236d..939da65 100644
--- a/Bindings/display/panel/samsung,s6d7aa0.yaml
+++ b/Bindings/display/panel/samsung,s6d7aa0.yaml

@@ -24,7 +24,8 @@
           - samsung,ltl101at01
       - const: samsung,s6d7aa0
 
-  reg: true
+  reg:
+    maxItems: 1
 
   backlight:
     description:

diff --git a/Bindings/display/panel/samsung,s6e63m0.yaml b/Bindings/display/panel/samsung,s6e63m0.yaml
index 6f1fc74..c47e2a1 100644
--- a/Bindings/display/panel/samsung,s6e63m0.yaml
+++ b/Bindings/display/panel/samsung,s6e63m0.yaml

@@ -18,7 +18,9 @@
   compatible:
     const: samsung,s6e63m0
 
-  reg: true
+  reg:
+    maxItems: 1
+
   reset-gpios: true
   port: true
   default-brightness: true

diff --git a/Bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml b/Bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
index b749e9e..42634fc 100644
--- a/Bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
+++ b/Bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml

@@ -15,7 +15,10 @@
 properties:
   compatible:
     const: samsung,s6e88a0-ams452ef01
-  reg: true
+
+  reg:
+    maxItems: 1
+
   port: true
   reset-gpios: true
   vdd3-supply:

diff --git a/Bindings/display/panel/samsung,s6e8aa0.yaml b/Bindings/display/panel/samsung,s6e8aa0.yaml
index 200fbf1..4601fa46 100644
--- a/Bindings/display/panel/samsung,s6e8aa0.yaml
+++ b/Bindings/display/panel/samsung,s6e8aa0.yaml

@@ -16,7 +16,9 @@
   compatible:
     const: samsung,s6e8aa0
 
-  reg: true
+  reg:
+    maxItems: 1
+
   reset-gpios: true
   display-timings: true
 

diff --git a/Bindings/display/panel/sharp,lq101r1sx01.yaml b/Bindings/display/panel/sharp,lq101r1sx01.yaml
index 57b44a0..ce820b9 100644
--- a/Bindings/display/panel/sharp,lq101r1sx01.yaml
+++ b/Bindings/display/panel/sharp,lq101r1sx01.yaml

@@ -37,7 +37,9 @@
       - enum:
           - sharp,lq101r1sx01
 
-  reg: true
+  reg:
+    maxItems: 1
+
   power-supply: true
   backlight: true
 

diff --git a/Bindings/display/panel/sharp,ls043t1le01.yaml b/Bindings/display/panel/sharp,ls043t1le01.yaml
index a90d0d8..b6ea246 100644
--- a/Bindings/display/panel/sharp,ls043t1le01.yaml
+++ b/Bindings/display/panel/sharp,ls043t1le01.yaml

@@ -16,7 +16,9 @@
   compatible:
     const: sharp,ls043t1le01-qhd
 
-  reg: true
+  reg:
+    maxItems: 1
+
   backlight: true
   reset-gpios: true
   port: true

diff --git a/Bindings/display/panel/sharp,ls060t1sx01.yaml b/Bindings/display/panel/sharp,ls060t1sx01.yaml
index 271c097..77a4fce 100644
--- a/Bindings/display/panel/sharp,ls060t1sx01.yaml
+++ b/Bindings/display/panel/sharp,ls060t1sx01.yaml

@@ -16,7 +16,9 @@
   compatible:
     const: sharp,ls060t1sx01
 
-  reg: true
+  reg:
+    maxItems: 1
+
   backlight: true
   reset-gpios: true
   port: true

diff --git a/Bindings/display/panel/sitronix,st7789v.yaml b/Bindings/display/panel/sitronix,st7789v.yaml
index ef162b5..0ce2ea1 100644
--- a/Bindings/display/panel/sitronix,st7789v.yaml
+++ b/Bindings/display/panel/sitronix,st7789v.yaml

@@ -21,7 +21,9 @@
       - jasonic,jt240mhqs-hwt-ek-e3
       - sitronix,st7789v
 
-  reg: true
+  reg:
+    maxItems: 1
+
   reset-gpios: true
   power-supply: true
   backlight: true

diff --git a/Bindings/display/panel/sony,acx424akp.yaml b/Bindings/display/panel/sony,acx424akp.yaml
index 059cc6d..fd778a2 100644
--- a/Bindings/display/panel/sony,acx424akp.yaml
+++ b/Bindings/display/panel/sony,acx424akp.yaml

@@ -22,7 +22,10 @@
     enum:
       - sony,acx424akp
       - sony,acx424akm
-  reg: true
+
+  reg:
+    maxItems: 1
+
   reset-gpios: true
   vddi-supply:
     description: regulator that supplies the vddi voltage

diff --git a/Bindings/display/panel/sony,acx565akm.yaml b/Bindings/display/panel/sony,acx565akm.yaml
index 98abdf4..5a82602 100644
--- a/Bindings/display/panel/sony,acx565akm.yaml
+++ b/Bindings/display/panel/sony,acx565akm.yaml

@@ -17,6 +17,9 @@
   compatible:
     const: sony,acx565akm
 
+  reg:
+    maxItems: 1
+
   label: true
   reset-gpios: true
   port: true

diff --git a/Bindings/display/panel/sony,td4353-jdi.yaml b/Bindings/display/panel/sony,td4353-jdi.yaml
index b6b885b..191b692 100644
--- a/Bindings/display/panel/sony,td4353-jdi.yaml
+++ b/Bindings/display/panel/sony,td4353-jdi.yaml

@@ -20,9 +20,12 @@
   compatible:
     const: sony,td4353-jdi-tama
 
-  reg: true
+  reg:
+    maxItems: 1
 
   backlight: true
+  width-mm: true
+  height-mm: true
 
   vddio-supply:
     description: VDDIO 1.8V supply

diff --git a/Bindings/display/panel/sony,tulip-truly-nt35521.yaml b/Bindings/display/panel/sony,tulip-truly-nt35521.yaml
index 9679729..a58a313 100644
--- a/Bindings/display/panel/sony,tulip-truly-nt35521.yaml
+++ b/Bindings/display/panel/sony,tulip-truly-nt35521.yaml

@@ -21,7 +21,8 @@
   compatible:
     const: sony,tulip-truly-nt35521
 
-  reg: true
+  reg:
+    maxItems: 1
 
   positive5-supply:
     description: Positive 5V supply

diff --git a/Bindings/display/panel/synaptics,r63353.yaml b/Bindings/display/panel/synaptics,r63353.yaml
index e5617d1..2fd6e0e 100644
--- a/Bindings/display/panel/synaptics,r63353.yaml
+++ b/Bindings/display/panel/synaptics,r63353.yaml

@@ -19,15 +19,17 @@
           - sharp,ls068b3sx02
       - const: syna,r63353
 
+  reg:
+    maxItems: 1
+
   avdd-supply: true
   dvdd-supply: true
-  reg: true
 
 required:
   - compatible
+  - reg
   - avdd-supply
   - dvdd-supply
-  - reg
   - reset-gpios
   - port
   - backlight

diff --git a/Bindings/display/panel/tpo,td.yaml b/Bindings/display/panel/tpo,td.yaml
index e8c8ee8..7edd29d 100644
--- a/Bindings/display/panel/tpo,td.yaml
+++ b/Bindings/display/panel/tpo,td.yaml

@@ -22,7 +22,9 @@
         # Toppoly TD043MTEA1 Panel
       - tpo,td043mtea1
 
-  reg: true
+  reg:
+    maxItems: 1
+
   label: true
   reset-gpios: true
   backlight: true

diff --git a/Bindings/display/panel/tpo,tpg110.yaml b/Bindings/display/panel/tpo,tpg110.yaml
index f0243d1..59a3737 100644
--- a/Bindings/display/panel/tpo,tpg110.yaml
+++ b/Bindings/display/panel/tpo,tpg110.yaml

@@ -52,7 +52,8 @@
           - const: tpo,tpg110
       - const: tpo,tpg110
 
-  reg: true
+  reg:
+    maxItems: 1
 
   grestb-gpios:
     maxItems: 1

diff --git a/Bindings/display/panel/visionox,rm69299.yaml b/Bindings/display/panel/visionox,rm69299.yaml
index 7723990..30047a6 100644
--- a/Bindings/display/panel/visionox,rm69299.yaml
+++ b/Bindings/display/panel/visionox,rm69299.yaml

@@ -20,7 +20,8 @@
   compatible:
     const: visionox,rm69299-1080p-display
 
-  reg: true
+  reg:
+    maxItems: 1
 
   vdda-supply:
     description: |

diff --git a/Bindings/display/panel/xinpeng,xpp055c272.yaml b/Bindings/display/panel/xinpeng,xpp055c272.yaml
index c407deb..9c9743a 100644
--- a/Bindings/display/panel/xinpeng,xpp055c272.yaml
+++ b/Bindings/display/panel/xinpeng,xpp055c272.yaml

@@ -15,7 +15,10 @@
 properties:
   compatible:
     const: xinpeng,xpp055c272
-  reg: true
+
+  reg:
+    maxItems: 1
+
   backlight: true
   port: true
   reset-gpios: true

diff --git a/Bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Bindings/display/rockchip/rockchip,dw-hdmi.yaml
index af638b6..2aac622 100644
--- a/Bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Bindings/display/rockchip/rockchip,dw-hdmi.yaml

@@ -15,6 +15,7 @@
 
 allOf:
   - $ref: ../bridge/synopsys,dw-hdmi.yaml#
+  - $ref: /schemas/sound/dai-common.yaml#
 
 properties:
   compatible:
@@ -124,6 +125,9 @@
     description:
       phandle to the GRF to mux vopl/vopb.
 
+  "#sound-dai-cells":
+    const: 0
+
 required:
   - compatible
   - reg
@@ -153,6 +157,7 @@
         ddc-i2c-bus = <&i2c5>;
         power-domains = <&power RK3288_PD_VIO>;
         rockchip,grf = <&grf>;
+        #sound-dai-cells = <0>;
 
         ports {
             #address-cells = <1>;

diff --git a/Bindings/display/rockchip/rockchip,inno-hdmi.yaml b/Bindings/display/rockchip/rockchip,inno-hdmi.yaml
index be78dcf..5b87b0f 100644
--- a/Bindings/display/rockchip/rockchip,inno-hdmi.yaml
+++ b/Bindings/display/rockchip/rockchip,inno-hdmi.yaml

@@ -37,6 +37,9 @@
   power-domains:
     maxItems: 1
 
+  "#sound-dai-cells":
+    const: 0
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -66,6 +69,7 @@
   - ports
 
 allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
   - if:
       properties:
         compatible:
@@ -106,6 +110,7 @@
       clock-names = "pclk";
       pinctrl-names = "default";
       pinctrl-0 = <&hdmi_ctl>;
+      #sound-dai-cells = <0>;
 
       ports {
         #address-cells = <1>;

diff --git a/Bindings/display/rockchip/rockchip,rk3066-hdmi.yaml b/Bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
index 1a68a94..6d4b78a 100644
--- a/Bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
+++ b/Bindings/display/rockchip/rockchip,rk3066-hdmi.yaml

@@ -10,6 +10,9 @@
   - Sandy Huang <hjc@rock-chips.com>
   - Heiko Stuebner <heiko@sntech.de>
 
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
 properties:
   compatible:
     const: rockchip,rk3066-hdmi
@@ -34,6 +37,9 @@
     description:
       This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1.
 
+  "#sound-dai-cells":
+    const: 0
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -83,6 +89,7 @@
       pinctrl-names = "default";
       power-domains = <&power RK3066_PD_VIO>;
       rockchip,grf = <&grf>;
+      #sound-dai-cells = <0>;
 
       ports {
         #address-cells = <1>;

diff --git a/Bindings/display/samsung/samsung,exynos5-dp.yaml b/Bindings/display/samsung/samsung,exynos5-dp.yaml
new file mode 100644
index 0000000..dda9097
--- /dev/null
+++ b/Bindings/display/samsung/samsung,exynos5-dp.yaml

@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5-dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5250/Exynos5420 SoC Display Port
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: samsung,exynos5-dp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: dp
+
+  display-timings:
+    $ref: /schemas/display/panel/display-timings.yaml#
+
+  interrupts:
+    maxItems: 1
+
+  hpd-gpios:
+    description:
+      Hotplug detect GPIO.
+      Indicates which GPIO should be used for hotplug detection
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: dp
+
+  power-domains:
+    maxItems: 1
+
+  interlaced:
+    type: boolean
+    deprecated: true
+    description:
+      Interlace scan mode. Progressive if defined, interlaced if not defined.
+
+  vsync-active-high:
+    type: boolean
+    deprecated: true
+    description:
+      VSYNC polarity configuration. High if defined, low if not defined
+
+  hsync-active-high:
+    type: boolean
+    deprecated: true
+    description:
+      HSYNC polarity configuration. High if defined, low if not defined
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with one endpoint connected to a dp-connector node.
+
+    required:
+      - port
+
+  samsung,hpd-gpios:
+    maxItems: 1
+    deprecated: true
+
+  samsung,ycbcr-coeff:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Deprecated prop that can parsed from drm_display_mode.
+
+  samsung,dynamic-range:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Deprecated prop that can parsed from drm_display_mode.
+
+  samsung,color-space:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Deprecated prop that can parsed from drm_display_info.
+
+  samsung,color-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Deprecated prop that can parsed from drm_display_info.
+
+  samsung,link-rate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Deprecated prop that can reading from monitor by dpcd method.
+
+  samsung,lane-count:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Deprecated prop that can reading from monitor by dpcd method.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - phys
+  - phy-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dp-controller@145b0000 {
+        compatible = "samsung,exynos5-dp";
+        reg = <0x145b0000 0x1000>;
+        clocks = <&clock CLK_DP>;
+        clock-names = "dp";
+        interrupts = <10 3>;
+        interrupt-parent = <&combiner>;
+        phys = <&dp_phy>;
+        phy-names = "dp";
+        pinctrl-0 = <&dp_hpd>;
+        pinctrl-names = "default";
+        power-domains = <&pd_disp1>;
+
+        samsung,color-space = <0>;
+        samsung,color-depth = <1>;
+        samsung,link-rate = <0x0a>;
+        samsung,lane-count = <2>;
+        hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+
+        ports {
+            port {
+                dp_out: endpoint {
+                    remote-endpoint = <&bridge_in>;
+                };
+            };
+        };
+    };

diff --git a/Bindings/display/tegra/nvidia,tegra20-host1x.yaml b/Bindings/display/tegra/nvidia,tegra20-host1x.yaml
index 94c5242..3563378 100644
--- a/Bindings/display/tegra/nvidia,tegra20-host1x.yaml
+++ b/Bindings/display/tegra/nvidia,tegra20-host1x.yaml

@@ -182,6 +182,15 @@
         compatible:
           contains:
             enum:
+              - nvidia,tegra194-host1x
+    then:
+      properties:
+        dma-coherent: true
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - nvidia,tegra234-host1x
     then:
       properties:
@@ -226,6 +235,8 @@
             use. Should be a mapping of IDs 0..n to IOMMU entries corresponding to
             usable stream IDs.
 
+        dma-coherent: true
+
       required:
         - reg-names
 

diff --git a/Bindings/dma/fsl,edma.yaml b/Bindings/dma/fsl,edma.yaml
index aa51d27..d54140f 100644
--- a/Bindings/dma/fsl,edma.yaml
+++ b/Bindings/dma/fsl,edma.yaml

@@ -21,8 +21,8 @@
       - enum:
           - fsl,vf610-edma
           - fsl,imx7ulp-edma
-          - fsl,imx8qm-adma
           - fsl,imx8qm-edma
+          - fsl,imx8ulp-edma
           - fsl,imx93-edma3
           - fsl,imx93-edma4
           - fsl,imx95-edma5
@@ -43,21 +43,39 @@
     maxItems: 64
 
   "#dma-cells":
+    description: |
+      Specifies the number of cells needed to encode an DMA channel.
+
+      Encode for cells number 2:
+        cell 0: index of dma channel mux instance.
+        cell 1: peripheral dma request id.
+
+      Encode for cells number 3:
+        cell 0: peripheral dma request id.
+        cell 1: dma channel priority.
+        cell 2: bitmask, defined at include/dt-bindings/dma/fsl-edma.h
     enum:
       - 2
       - 3
 
   dma-channels:
-    minItems: 1
-    maxItems: 64
+    minimum: 1
+    maximum: 64
 
   clocks:
     minItems: 1
-    maxItems: 2
+    maxItems: 33
 
   clock-names:
     minItems: 1
+    maxItems: 33
+
+  power-domains:
+    description:
+      The number of power domains matches the number of channels, arranged
+      in ascending order according to their associated DMA channels.
+    minItems: 1
-    maxItems: 2
+    maxItems: 64
 
   big-endian:
     description: |
@@ -70,7 +88,6 @@
   - compatible
   - reg
   - interrupts
-  - clocks
   - dma-channels
 
 allOf:
@@ -80,7 +97,6 @@
         compatible:
           contains:
             enum:
-              - fsl,imx8qm-adma
               - fsl,imx8qm-edma
               - fsl,imx93-edma3
               - fsl,imx93-edma4
@@ -108,6 +124,7 @@
       properties:
         clocks:
           minItems: 2
+          maxItems: 2
         clock-names:
           items:
             - const: dmamux0
@@ -136,6 +153,7 @@
       properties:
         clock:
           minItems: 2
+          maxItems: 2
         clock-names:
           items:
             - const: dma
@@ -151,6 +169,58 @@
         dma-channels:
           const: 32
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8ulp-edma
+    then:
+      properties:
+        clocks:
+          minItems: 33
+        clock-names:
+          minItems: 33
+          items:
+            oneOf:
+              - const: dma
+              - pattern: "^ch(0[0-9]|[1-2][0-9]|3[01])$"
+
+        interrupt-names: false
+        interrupts:
+          minItems: 32
+        "#dma-cells":
+          const: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,vf610-edma
+              - fsl,imx7ulp-edma
+              - fsl,imx93-edma3
+              - fsl,imx93-edma4
+              - fsl,imx95-edma5
+              - fsl,imx8ulp-edma
+              - fsl,ls1028a-edma
+    then:
+      required:
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-adma
+              - fsl,imx8qm-edma
+    then:
+      required:
+        - power-domains
+    else:
+      properties:
+        power-domains: false
+
 unevaluatedProperties: false
 
 examples:
@@ -206,44 +276,27 @@
 
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/clock/imx93-clock.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
 
-    dma-controller@44000000 {
-      compatible = "fsl,imx93-edma3";
-      reg = <0x44000000 0x200000>;
+    dma-controller@5a9f0000 {
+      compatible = "fsl,imx8qm-edma";
+      reg = <0x5a9f0000 0x90000>;
       #dma-cells = <3>;
-      dma-channels = <31>;
-      interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&clk IMX93_CLK_EDMA1_GATE>;
-        clock-names = "dma";
+      dma-channels = <8>;
+      interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
+      power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
+                      <&pd IMX_SC_R_DMA_3_CH1>,
+                      <&pd IMX_SC_R_DMA_3_CH2>,
+                      <&pd IMX_SC_R_DMA_3_CH3>,
+                      <&pd IMX_SC_R_DMA_3_CH4>,
+                      <&pd IMX_SC_R_DMA_3_CH5>,
+                      <&pd IMX_SC_R_DMA_3_CH6>,
+                      <&pd IMX_SC_R_DMA_3_CH7>;
     };

diff --git a/Bindings/dma/fsl,imx-sdma.yaml b/Bindings/dma/fsl,imx-sdma.yaml
index 37135fa..738b25b 100644
--- a/Bindings/dma/fsl,imx-sdma.yaml
+++ b/Bindings/dma/fsl,imx-sdma.yaml

@@ -94,6 +94,7 @@
           - SAI: 24
           - Multi SAI: 25
           - HDMI Audio: 26
+          - I2C: 27
 
        The third cell: transfer priority ID
          enum:

diff --git a/Bindings/dma/qcom_hidma_mgmt.txt b/Bindings/dma/qcom_hidma_mgmt.txt
deleted file mode 100644
index 1ae4748..0000000
--- a/Bindings/dma/qcom_hidma_mgmt.txt
+++ /dev/null

@@ -1,95 +0,0 @@
-Qualcomm Technologies HIDMA Management interface
-
-Qualcomm Technologies HIDMA is a high speed DMA device. It only supports
-memcpy and memset capabilities. It has been designed for virtualized
-environments.
-
-Each HIDMA HW instance consists of multiple DMA channels. These channels
-share the same bandwidth. The bandwidth utilization can be partitioned
-among channels based on the priority and weight assignments.
-
-There are only two priority levels and 15 weigh assignments possible.
-
-Other parameters here determine how much of the system bus this HIDMA
-instance can use like maximum read/write request and number of bytes to
-read/write in a single burst.
-
-Main node required properties:
-- compatible: "qcom,hidma-mgmt-1.0";
-- reg: Address range for DMA device
-- dma-channels: Number of channels supported by this DMA controller.
-- max-write-burst-bytes: Maximum write burst in bytes that HIDMA can
-  occupy the bus for in a single transaction. A memcpy requested is
-  fragmented to multiples of this amount. This parameter is used while
-  writing into destination memory. Setting this value incorrectly can
-  starve other peripherals in the system.
-- max-read-burst-bytes: Maximum read burst in bytes that HIDMA can
-  occupy the bus for in a single transaction. A memcpy request is
-  fragmented to multiples of this amount. This parameter is used while
-  reading the source memory. Setting this value incorrectly can starve
-  other peripherals in the system.
-- max-write-transactions: This value is how many times a write burst is
-  applied back to back while writing to the destination before yielding
-  the bus.
-- max-read-transactions: This value is how many times a read burst is
-  applied back to back while reading the source before yielding the bus.
-- channel-reset-timeout-cycles: Channel reset timeout in cycles for this SOC.
-  Once a reset is applied to the HW, HW starts a timer for reset operation
-  to confirm. If reset is not completed within this time, HW reports reset
-  failure.
-
-Sub-nodes:
-
-HIDMA has one or more DMA channels that are used to move data from one
-memory location to another.
-
-When the OS is not in control of the management interface (i.e. it's a guest),
-the channel nodes appear on their own, not under a management node.
-
-Required properties:
-- compatible: must contain "qcom,hidma-1.0" for initial HW or
-  "qcom,hidma-1.1"/"qcom,hidma-1.2" for MSI capable HW.
-- reg: Addresses for the transfer and event channel
-- interrupts: Should contain the event interrupt
-- desc-count: Number of asynchronous requests this channel can handle
-- iommus: required a iommu node
-
-Optional properties for MSI:
-- msi-parent : See the generic MSI binding described in
- devicetree/bindings/interrupt-controller/msi.txt for a description of the
- msi-parent property.
-
-Example:
-
-Hypervisor OS configuration:
-
-	hidma-mgmt@f9984000 = {
-		compatible = "qcom,hidma-mgmt-1.0";
-		reg = <0xf9984000 0x15000>;
-		dma-channels = <6>;
-		max-write-burst-bytes = <1024>;
-		max-read-burst-bytes = <1024>;
-		max-write-transactions = <31>;
-		max-read-transactions = <31>;
-		channel-reset-timeout-cycles = <0x500>;
-
-		hidma_24: dma-controller@5c050000 {
-			compatible = "qcom,hidma-1.0";
-			reg = <0 0x5c050000 0x0 0x1000>,
-			      <0 0x5c0b0000 0x0 0x1000>;
-			interrupts = <0 389 0>;
-			desc-count = <10>;
-			iommus = <&system_mmu>;
-		};
-	};
-
-Guest OS configuration:
-
-	hidma_24: dma-controller@5c050000 {
-		compatible = "qcom,hidma-1.0";
-		reg = <0 0x5c050000 0x0 0x1000>,
-		      <0 0x5c0b0000 0x0 0x1000>;
-		interrupts = <0 389 0>;
-		desc-count = <10>;
-		iommus = <&system_mmu>;
-	};

diff --git a/Bindings/dma/snps,dma-spear1340.yaml b/Bindings/dma/snps,dma-spear1340.yaml
index 5da8291..c21a4f0 100644
--- a/Bindings/dma/snps,dma-spear1340.yaml
+++ b/Bindings/dma/snps,dma-spear1340.yaml

@@ -93,10 +93,10 @@
   data-width:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     description: Data bus width per each DMA master in bytes.
+    minItems: 1
+    maxItems: 4
     items:
-      maxItems: 4
-      items:
-        enum: [4, 8, 16, 32]
+      enum: [4, 8, 16, 32]
 
   data_width:
     $ref: /schemas/types.yaml#/definitions/uint32-array
@@ -106,28 +106,28 @@
       deprecated. It' usage is discouraged in favor of data-width one. Moreover
       the property incorrectly permits to define data-bus width of 8 and 16
       bits, which is impossible in accordance with DW DMAC IP-core data book.
+    minItems: 1
+    maxItems: 4
     items:
-      maxItems: 4
-      items:
-        enum:
-          - 0 # 8 bits
-          - 1 # 16 bits
-          - 2 # 32 bits
-          - 3 # 64 bits
-          - 4 # 128 bits
-          - 5 # 256 bits
-        default: 0
+      enum:
+        - 0 # 8 bits
+        - 1 # 16 bits
+        - 2 # 32 bits
+        - 3 # 64 bits
+        - 4 # 128 bits
+        - 5 # 256 bits
+      default: 0
 
   multi-block:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     description: |
       LLP-based multi-block transfer supported by hardware per
       each DMA channel.
+    minItems: 1
+    maxItems: 8
     items:
-      maxItems: 8
-      items:
-        enum: [0, 1]
-        default: 1
+      enum: [0, 1]
+      default: 1
 
   snps,max-burst-len:
     $ref: /schemas/types.yaml#/definitions/uint32-array
@@ -138,11 +138,11 @@
       will be from 1 to max-burst-len words. It's an array property with one
       cell per channel in the units determined by the value set in the
       CTLx.SRC_TR_WIDTH/CTLx.DST_TR_WIDTH fields (data width).
+    minItems: 1
+    maxItems: 8
     items:
-      maxItems: 8
-      items:
-        enum: [4, 8, 16, 32, 64, 128, 256]
-        default: 256
+      enum: [4, 8, 16, 32, 64, 128, 256]
+      default: 256
 
   snps,dma-protection-control:
     $ref: /schemas/types.yaml#/definitions/uint32

diff --git a/Bindings/dma/snps,dw-axi-dmac.yaml b/Bindings/dma/snps,dw-axi-dmac.yaml
index 363cf8b..525f5f3 100644
--- a/Bindings/dma/snps,dw-axi-dmac.yaml
+++ b/Bindings/dma/snps,dw-axi-dmac.yaml

@@ -21,6 +21,7 @@
       - snps,axi-dma-1.01a
       - intel,kmb-axi-dma
       - starfive,jh7110-axi-dma
+      - starfive,jh8100-axi-dma
 
   reg:
     minItems: 1

diff --git a/Bindings/dma/st,stm32-dma.yaml b/Bindings/dma/st,stm32-dma.yaml
index 329847e..ff935a0 100644
--- a/Bindings/dma/st,stm32-dma.yaml
+++ b/Bindings/dma/st,stm32-dma.yaml

@@ -82,6 +82,10 @@
     description: if defined, it indicates that the controller
       supports memory-to-memory transfer
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

diff --git a/Bindings/dma/st,stm32-dmamux.yaml b/Bindings/dma/st,stm32-dmamux.yaml
index e722fbc..ddf82bf 100644
--- a/Bindings/dma/st,stm32-dmamux.yaml
+++ b/Bindings/dma/st,stm32-dmamux.yaml

@@ -28,6 +28,10 @@
   resets:
     maxItems: 1
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

diff --git a/Bindings/firmware/arm,scmi.yaml b/Bindings/firmware/arm,scmi.yaml
index 4591523..7de2c29 100644
--- a/Bindings/firmware/arm,scmi.yaml
+++ b/Bindings/firmware/arm,scmi.yaml

@@ -247,6 +247,37 @@
       reg:
         const: 0x18
 
+  protocol@19:
+    type: object
+    allOf:
+      - $ref: '#/$defs/protocol-node'
+      - $ref: /schemas/pinctrl/pinctrl.yaml
+
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x19
+
+    patternProperties:
+      '-pins$':
+        type: object
+        allOf:
+          - $ref: /schemas/pinctrl/pincfg-node.yaml#
+          - $ref: /schemas/pinctrl/pinmux-node.yaml#
+        unevaluatedProperties: false
+
+        description:
+          A pin multiplexing sub-node describes how to configure a
+          set of pins in some desired function.
+          A single sub-node may define several pin configurations.
+          This sub-node is using the default pinctrl bindings to configure
+          pin multiplexing and using SCMI protocol to apply a specified
+          configuration.
+
+    required:
+      - reg
+
 additionalProperties: false
 
 $defs:
@@ -355,7 +386,7 @@
 
             scmi_dvfs: protocol@13 {
                 reg = <0x13>;
-                #clock-cells = <1>;
+                #power-domain-cells = <1>;
 
                 mboxes = <&mhuB 1 0>,
                          <&mhuB 1 1>;
@@ -401,6 +432,25 @@
             scmi_powercap: protocol@18 {
                 reg = <0x18>;
             };
+
+            scmi_pinctrl: protocol@19 {
+                reg = <0x19>;
+
+                i2c2-pins {
+                    groups = "g_i2c2_a", "g_i2c2_b";
+                    function = "f_i2c2";
+                };
+
+                mdio-pins {
+                    groups = "g_avb_mdio";
+                    drive-strength = <24>;
+                };
+
+                keys_pins: keys-pins {
+                    pins = "gpio_5_17", "gpio_5_20", "gpio_5_22", "gpio_2_1";
+                    bias-pull-up;
+                };
+            };
         };
     };
 
@@ -468,7 +518,7 @@
                 reg = <0x13>;
                 linaro,optee-channel-id = <1>;
                 shmem = <&cpu_optee_lpri0>;
-                #clock-cells = <1>;
+                #power-domain-cells = <1>;
             };
 
             scmi_clk0: protocol@14 {

diff --git a/Bindings/fpga/xlnx,fpga-selectmap.yaml b/Bindings/fpga/xlnx,fpga-selectmap.yaml
new file mode 100644
index 0000000..0577574
--- /dev/null
+++ b/Bindings/fpga/xlnx,fpga-selectmap.yaml

@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xlnx,fpga-selectmap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx SelectMAP FPGA interface
+
+maintainers:
+  - Charles Perry <charles.perry@savoirfairelinux.com>
+
+description: |
+  Xilinx 7 Series FPGAs support a method of loading the bitstream over a
+  parallel port named the SelectMAP interface in the documentation. Only
+  the x8 mode is supported where data is loaded at one byte per rising edge of
+  the clock, with the MSB of each byte presented to the D0 pin.
+
+  Datasheets:
+    https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf
+
+allOf:
+  - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,fpga-xc7s-selectmap
+      - xlnx,fpga-xc7a-selectmap
+      - xlnx,fpga-xc7k-selectmap
+      - xlnx,fpga-xc7v-selectmap
+
+  reg:
+    description:
+      At least 1 byte of memory mapped IO
+    maxItems: 1
+
+  prog-gpios:
+    description:
+      config pin (referred to as PROGRAM_B in the manual)
+    maxItems: 1
+
+  done-gpios:
+    description:
+      config status pin (referred to as DONE in the manual)
+    maxItems: 1
+
+  init-gpios:
+    description:
+      initialization status and configuration error pin
+      (referred to as INIT_B in the manual)
+    maxItems: 1
+
+  csi-gpios:
+    description:
+      chip select pin (referred to as CSI_B in the manual)
+      Optional gpio for if the bus controller does not provide a chip select.
+    maxItems: 1
+
+  rdwr-gpios:
+    description:
+      read/write select pin (referred to as RDWR_B in the manual)
+      Optional gpio for if the bus controller does not provide this pin.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - prog-gpios
+  - done-gpios
+  - init-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    fpga-mgr@8000000 {
+      compatible = "xlnx,fpga-xc7s-selectmap";
+      reg = <0x8000000 0x4>;
+      prog-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+      init-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+      done-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+      csi-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+      rdwr-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
+    };
+...

diff --git a/Bindings/gpio/brcm,brcmstb-gpio.yaml b/Bindings/gpio/brcm,brcmstb-gpio.yaml
index a1e71c9..f096f28 100644
--- a/Bindings/gpio/brcm,brcmstb-gpio.yaml
+++ b/Bindings/gpio/brcm,brcmstb-gpio.yaml

@@ -62,6 +62,8 @@
 
   interrupt-controller: true
 
+  gpio-ranges: true
+
   wakeup-source:
     type: boolean
     description: >
@@ -88,6 +90,7 @@
         interrupt-parent = <&irq0_intc>;
         interrupts = <0x6>;
         brcm,gpio-bank-widths = <32 32 32 24>;
+        gpio-ranges = <&pinctrl 0 0 120>;
     };
 
     upg_gio_aon: gpio@f04172c0 {

diff --git a/Bindings/gpio/microchip,mpfs-gpio.yaml b/Bindings/gpio/microchip,mpfs-gpio.yaml
index d481e78..d61569b 100644
--- a/Bindings/gpio/microchip,mpfs-gpio.yaml
+++ b/Bindings/gpio/microchip,mpfs-gpio.yaml

@@ -14,6 +14,7 @@
     items:
       - enum:
           - microchip,mpfs-gpio
+          - microchip,coregpio-rtl-v3
 
   reg:
     maxItems: 1
@@ -43,6 +44,7 @@
     default: 32
 
   gpio-controller: true
+  gpio-line-names: true
 
 patternProperties:
   "^.+-hog(-[0-9]+)?$":
@@ -62,12 +64,21 @@
       - gpio-hog
       - gpios
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: microchip,mpfs-gpio
+    then:
+      required:
+        - interrupts
+        - "#interrupt-cells"
+        - interrupt-controller
+
 required:
   - compatible
   - reg
-  - interrupts
-  - "#interrupt-cells"
-  - interrupt-controller
   - "#gpio-cells"
   - gpio-controller
   - clocks

diff --git a/Bindings/gpio/raspberrypi,firmware-gpio.txt b/Bindings/gpio/raspberrypi,firmware-gpio.txt
deleted file mode 100644
index ce97265..0000000
--- a/Bindings/gpio/raspberrypi,firmware-gpio.txt
+++ /dev/null

@@ -1,30 +0,0 @@
-Raspberry Pi GPIO expander
-
-The Raspberry Pi 3 GPIO expander is controlled by the VC4 firmware. The
-firmware exposes a mailbox interface that allows the ARM core to control the
-GPIO lines on the expander.
-
-The Raspberry Pi GPIO expander node must be a child node of the Raspberry Pi
-firmware node.
-
-Required properties:
-
-- compatible : Should be "raspberrypi,firmware-gpio"
-- gpio-controller : Marks the device node as a gpio controller
-- #gpio-cells : Should be two.  The first cell is the pin number, and
-  the second cell is used to specify the gpio polarity:
-  0 = active high
-  1 = active low
-
-Example:
-
-firmware: firmware-rpi {
-	compatible = "raspberrypi,bcm2835-firmware";
-	mboxes = <&mailbox>;
-
-	expgpio: gpio {
-		 compatible = "raspberrypi,firmware-gpio";
-		 gpio-controller;
-		 #gpio-cells = <2>;
-	 };
-};

diff --git a/Bindings/gpu/arm,mali-valhall-csf.yaml b/Bindings/gpu/arm,mali-valhall-csf.yaml
new file mode 100644
index 0000000..a5b4e00
--- /dev/null
+++ b/Bindings/gpu/arm,mali-valhall-csf.yaml

@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/arm,mali-valhall-csf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Mali Valhall GPU
+
+maintainers:
+  - Liviu Dudau <liviu.dudau@arm.com>
+  - Boris Brezillon <boris.brezillon@collabora.com>
+
+properties:
+  $nodename:
+    pattern: '^gpu@[a-f0-9]+$'
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - rockchip,rk3588-mali
+          - const: arm,mali-valhall-csf   # Mali Valhall GPU model/revision is fully discoverable
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Job interrupt
+      - description: MMU interrupt
+      - description: GPU interrupt
+
+  interrupt-names:
+    items:
+      - const: job
+      - const: mmu
+      - const: gpu
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: coregroup
+      - const: stacks
+
+  mali-supply: true
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  power-domains:
+    minItems: 1
+    maxItems: 5
+
+  power-domain-names:
+    minItems: 1
+    maxItems: 5
+
+  sram-supply: true
+
+  "#cooling-cells":
+    const: 2
+
+  dynamic-power-coefficient:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      A u32 value that represents the running time dynamic
+      power coefficient in units of uW/MHz/V^2. The
+      coefficient can either be calculated from power
+      measurements or derived by analysis.
+
+      The dynamic power consumption of the GPU is
+      proportional to the square of the Voltage (V) and
+      the clock frequency (f). The coefficient is used to
+      calculate the dynamic power as below -
+
+      Pdyn = dynamic-power-coefficient * V^2 * f
+
+      where voltage is in V, frequency is in MHz.
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - mali-supply
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3588-mali
+    then:
+      properties:
+        clocks:
+          minItems: 3
+        power-domains:
+          maxItems: 1
+        power-domain-names: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3588-power.h>
+
+    gpu: gpu@fb000000 {
+        compatible = "rockchip,rk3588-mali", "arm,mali-valhall-csf";
+        reg = <0xfb000000 0x200000>;
+        interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>;
+        interrupt-names = "job", "mmu", "gpu";
+        clock-names = "core", "coregroup", "stacks";
+        clocks = <&cru CLK_GPU>, <&cru CLK_GPU_COREGROUP>,
+                 <&cru CLK_GPU_STACKS>;
+        power-domains = <&power RK3588_PD_GPU>;
+        operating-points-v2 = <&gpu_opp_table>;
+        mali-supply = <&vdd_gpu_s0>;
+        sram-supply = <&vdd_gpu_mem_s0>;
+
+        gpu_opp_table: opp-table {
+            compatible = "operating-points-v2";
+            opp-300000000 {
+                opp-hz = /bits/ 64 <300000000>;
+                opp-microvolt = <675000 675000 850000>;
+            };
+            opp-400000000 {
+                opp-hz = /bits/ 64 <400000000>;
+                opp-microvolt = <675000 675000 850000>;
+            };
+        };
+    };
+
+...

diff --git a/Bindings/hwmon/adc128d818.txt b/Bindings/hwmon/adc128d818.txt
deleted file mode 100644
index d0ae46d..0000000
--- a/Bindings/hwmon/adc128d818.txt
+++ /dev/null

@@ -1,38 +0,0 @@
-TI ADC128D818 ADC System Monitor With Temperature Sensor
---------------------------------------------------------
-
-Operation modes:
-
- - Mode 0:  7 single-ended voltage readings (IN0-IN6),
-            1 temperature reading (internal)
- - Mode 1:  8 single-ended voltage readings (IN0-IN7),
-            no temperature
- - Mode 2:  4 pseudo-differential voltage readings
-              (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6),
-            1 temperature reading (internal)
- - Mode 3:  4 single-ended voltage readings (IN0-IN3),
-            2 pseudo-differential voltage readings
-              (IN4-IN5, IN7-IN6),
-            1 temperature reading (internal)
-
-If no operation mode is configured via device tree, the driver keeps the
-currently active chip operation mode (default is mode 0).
-
-
-Required node properties:
-
- - compatible:  must be set to "ti,adc128d818"
- - reg:         I2C address of the device
-
-Optional node properties:
-
- - ti,mode:     Operation mode (u8) (see above).
-
-
-Example (operation mode 2):
-
-	adc128d818@1d {
-		compatible = "ti,adc128d818";
-		reg = <0x1d>;
-		ti,mode = /bits/ 8 <2>;
-	};

diff --git a/Bindings/hwmon/adi,adm1275.yaml b/Bindings/hwmon/adi,adm1275.yaml
index b680612..5b076d6 100644
--- a/Bindings/hwmon/adi,adm1275.yaml
+++ b/Bindings/hwmon/adi,adm1275.yaml

@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/hwmon/adi,adm1275.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices ADM1075/ADM127x/ADM129x digital power monitors
+title: Analog Devices ADM1075/ADM127x/ADM1281/ADM129x digital power monitors
 
 maintainers:
   - Krzysztof Kozlowski <krzk@kernel.org>
@@ -27,6 +27,7 @@
       - adi,adm1275
       - adi,adm1276
       - adi,adm1278
+      - adi,adm1281
       - adi,adm1293
       - adi,adm1294
 
@@ -91,6 +92,7 @@
           contains:
             enum:
               - adi,adm1278
+              - adi,adm1281
               - adi,adm1293
               - adi,adm1294
     then:

diff --git a/Bindings/hwmon/as370.txt b/Bindings/hwmon/as370.txt
deleted file mode 100644
index d102fe7..0000000
--- a/Bindings/hwmon/as370.txt
+++ /dev/null

@@ -1,11 +0,0 @@
-Bindings for Synaptics AS370 PVT sensors
-
-Required properties:
-- compatible : "syna,as370-hwmon"
-- reg        : address and length of the register set.
-
-Example:
-	hwmon@ea0810 {
-		compatible = "syna,as370-hwmon";
-		reg = <0xea0810 0xc>;
-	};

diff --git a/Bindings/hwmon/ibm,opal-sensor.yaml b/Bindings/hwmon/ibm,opal-sensor.yaml
new file mode 100644
index 0000000..376ee7f
--- /dev/null
+++ b/Bindings/hwmon/ibm,opal-sensor.yaml

@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ibm,opal-sensor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM POWERNV platform sensors
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - ibm,opal-sensor-cooling-fan
+      - ibm,opal-sensor-amb-temp
+      - ibm,opal-sensor-power-supply
+      - ibm,opal-sensor-power
+
+  sensor-id:
+    description:
+      An opaque id provided by the firmware to the kernel, identifies a
+      given sensor and its attribute data.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - sensor-id
+
+additionalProperties: false
+
+examples:
+  - |
+    sensor {
+        compatible = "ibm,opal-sensor-cooling-fan";
+        sensor-id = <0x7052107>;
+    };

diff --git a/Bindings/hwmon/ibm,p8-occ-hwmon.txt b/Bindings/hwmon/ibm,p8-occ-hwmon.txt
deleted file mode 100644
index 5dc5d2e..0000000
--- a/Bindings/hwmon/ibm,p8-occ-hwmon.txt
+++ /dev/null

@@ -1,25 +0,0 @@
-Device-tree bindings for I2C-based On-Chip Controller hwmon device
-------------------------------------------------------------------
-
-Required properties:
- - compatible = "ibm,p8-occ-hwmon";
- - reg = <I2C address>;			: I2C bus address
-
-Examples:
-
-    i2c-bus@100 {
-        #address-cells = <1>;
-        #size-cells = <0>;
-        clock-frequency = <100000>;
-        < more properties >
-
-        occ-hwmon@1 {
-            compatible = "ibm,p8-occ-hwmon";
-            reg = <0x50>;
-        };
-
-        occ-hwmon@2 {
-            compatible = "ibm,p8-occ-hwmon";
-            reg = <0x51>;
-        };
-    };

diff --git a/Bindings/hwmon/ibmpowernv.txt b/Bindings/hwmon/ibmpowernv.txt
deleted file mode 100644
index f93242b..0000000
--- a/Bindings/hwmon/ibmpowernv.txt
+++ /dev/null

@@ -1,23 +0,0 @@
-IBM POWERNV platform sensors
-----------------------------
-
-Required node properties:
-- compatible: must be one of
-		"ibm,opal-sensor-cooling-fan"
-		"ibm,opal-sensor-amb-temp"
-		"ibm,opal-sensor-power-supply"
-		"ibm,opal-sensor-power"
-- sensor-id: an opaque id provided by the firmware to the kernel, identifies a
-	     given sensor and its attribute data
-
-Example sensors node:
-
-cooling-fan#8-data {
-	sensor-id = <0x7052107>;
-	compatible = "ibm,opal-sensor-cooling-fan";
-};
-
-amb-temp#1-thrs {
-	sensor-id = <0x5096000>;
-	compatible = "ibm,opal-sensor-amb-temp";
-};

diff --git a/Bindings/hwmon/lm87.txt b/Bindings/hwmon/lm87.txt
deleted file mode 100644
index 758ff39..0000000
--- a/Bindings/hwmon/lm87.txt
+++ /dev/null

@@ -1,30 +0,0 @@
-*LM87 hwmon sensor.
-
-Required properties:
-- compatible: Should be
-	"ti,lm87"
-
-- reg: I2C address
-
-optional properties:
-- has-temp3: This configures pins 18 and 19 to be used as a second
-             remote temperature sensing channel. By default the pins
-             are configured as voltage input pins in0 and in5.
-
-- has-in6: When set, pin 5 is configured to be used as voltage input
-           in6. Otherwise the pin is set as FAN1 input.
-
-- has-in7: When set, pin 6 is configured to be used as voltage input
-           in7. Otherwise the pin is set as FAN2 input.
-
-- vcc-supply: a Phandle for the regulator supplying power, can be
-              configured to measure 5.0V power supply. Default is 3.3V.
-
-Example:
-
-lm87@2e {
-	compatible = "ti,lm87";
-	reg = <0x2e>;
-	has-temp3;
-	vcc-supply = <&reg_5v0>;
-};

diff --git a/Bindings/hwmon/max6650.txt b/Bindings/hwmon/max6650.txt
deleted file mode 100644
index f6bd87d..0000000
--- a/Bindings/hwmon/max6650.txt
+++ /dev/null

@@ -1,28 +0,0 @@
-Bindings for MAX6651 and MAX6650 I2C fan controllers
-
-Reference:
-[1]	https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf
-
-Required properties:
-- compatible : One of "maxim,max6650" or "maxim,max6651"
-- reg        : I2C address, one of 0x1b, 0x1f, 0x4b, 0x48.
-
-Optional properties, default is to retain the chip's current setting:
-- maxim,fan-microvolt : The supply voltage of the fan, either 5000000 uV or
-			12000000 uV.
-- maxim,fan-prescale  : Pre-scaling value, as per datasheet [1]. Lower values
-			allow more fine-grained control of slower fans.
-			Valid: 1, 2, 4, 8, 16.
-- maxim,fan-target-rpm: Initial requested fan rotation speed. If specified, the
-			driver selects closed-loop mode and the requested speed.
-			This ensures the fan is already running before userspace
-			takes over.
-
-Example:
-	fan-max6650: max6650@1b {
-		reg = <0x1b>;
-		compatible = "maxim,max6650";
-		maxim,fan-microvolt = <12000000>;
-		maxim,fan-prescale = <4>;
-		maxim,fan-target-rpm = <1200>;
-	};

diff --git a/Bindings/hwmon/maxim,max6650.yaml b/Bindings/hwmon/maxim,max6650.yaml
new file mode 100644
index 0000000..2c26104
--- /dev/null
+++ b/Bindings/hwmon/maxim,max6650.yaml

@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/maxim,max6650.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX6650 and MAX6651 I2C Fan Controllers
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+  The MAX6650 and MAX6651 regulate and monitor the speed
+  of 5VDC/12VDC burshless fans with built-in tachometers.
+
+  Datasheets:
+    https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max6650
+      - maxim,max6651
+
+  reg:
+    maxItems: 1
+
+  maxim,fan-microvolt:
+    description:
+      The supply voltage of the fan, either 5000000 uV or
+      12000000 uV.
+    enum: [5000000, 12000000]
+
+  maxim,fan-prescale:
+    description:
+      Pre-scaling value, as per datasheet. Lower values
+      allow more fine-grained control of slower fans.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8, 16]
+
+  maxim,fan-target-rpm:
+    description:
+      Initial requested fan rotation speed. If specified, the
+      driver selects closed-loop mode and the requested speed.
+      This ensures the fan is already running before userspace
+      takes over.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 30000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fan-controller@1b {
+            compatible = "maxim,max6650";
+            reg = <0x1b>;
+            maxim,fan-microvolt = <12000000>;
+            maxim,fan-prescale = <4>;
+            maxim,fan-target-rpm = <1200>;
+        };
+    };

diff --git a/Bindings/hwmon/pmbus/adi,adp1050.yaml b/Bindings/hwmon/pmbus/adi,adp1050.yaml
new file mode 100644
index 0000000..10c2204
--- /dev/null
+++ b/Bindings/hwmon/pmbus/adi,adp1050.yaml

@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/pmbus/adi,adp1050.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADP1050 digital controller with PMBus interface
+
+maintainers:
+  - Radu Sabau <radu.sabau@analog.com>
+
+description: |
+   The ADP1050 is used to monitor system voltages, currents and temperatures.
+   Through the PMBus interface, the ADP1050 targets isolated power supplies
+   and has four individual monitors for input/output voltage, input current
+   and temperature.
+   Datasheet:
+     https://www.analog.com/en/products/adp1050.html
+
+properties:
+  compatible:
+    const: adi,adp1050
+
+  reg:
+    maxItems: 1
+
+  vcc-supply: true
+
+required:
+  - compatible
+  - reg
+  - vcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clock-frequency = <100000>;
+
+        hwmon@70 {
+            compatible = "adi,adp1050";
+            reg = <0x70>;
+            vcc-supply = <&vcc>;
+        };
+    };
+...

diff --git a/Bindings/hwmon/pwm-fan.txt b/Bindings/hwmon/pwm-fan.txt
deleted file mode 100644
index 48886f0..0000000
--- a/Bindings/hwmon/pwm-fan.txt
+++ /dev/null

@@ -1 +0,0 @@
-This file has moved to pwm-fan.yaml.

diff --git a/Bindings/hwmon/st,stts751.yaml b/Bindings/hwmon/st,stts751.yaml
new file mode 100644
index 0000000..9c825ad
--- /dev/null
+++ b/Bindings/hwmon/st,stts751.yaml

@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/st,stts751.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STTS751 Thermometer
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+properties:
+  compatible:
+    const: st,stts751
+
+  reg:
+    maxItems: 1
+
+  smbus-timeout-disable:
+    description:
+      When set, the smbus timeout function will be disabled.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        thermometer@48 {
+            compatible = "st,stts751";
+            reg = <0x48>;
+            smbus-timeout-disable;
+        };
+    };

diff --git a/Bindings/hwmon/stts751.txt b/Bindings/hwmon/stts751.txt
deleted file mode 100644
index 3ee1dc3..0000000
--- a/Bindings/hwmon/stts751.txt
+++ /dev/null

@@ -1,15 +0,0 @@
-* STTS751 thermometer.
-
-Required node properties:
-- compatible: "stts751"
-- reg: I2C bus address of the device
-
-Optional properties:
-- smbus-timeout-disable: when set, the smbus timeout function will be disabled
-
-Example stts751 node:
-
-temp-sensor {
-	compatible = "stts751";
-	reg = <0x48>;
-}

diff --git a/Bindings/hwmon/syna,as370.yaml b/Bindings/hwmon/syna,as370.yaml
new file mode 100644
index 0000000..1f7005f
--- /dev/null
+++ b/Bindings/hwmon/syna,as370.yaml

@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/syna,as370.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synaptics AS370 PVT sensors
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+properties:
+  compatible:
+    const: syna,as370-hwmon
+
+  reg:
+    description:
+      Address and length of the register set.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sensor@ea0810 {
+        compatible = "syna,as370-hwmon";
+        reg = <0xea0810 0xc>;
+    };

diff --git a/Bindings/hwmon/ti,adc128d818.yaml b/Bindings/hwmon/ti,adc128d818.yaml
new file mode 100644
index 0000000..a320354
--- /dev/null
+++ b/Bindings/hwmon/ti,adc128d818.yaml

@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,adc128d818.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC128D818 ADC System Monitor With Temperature Sensor
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+  The ADC128D818 is a 12-Bit, 8-Channel Analog to Digital Converter (ADC)
+  with a temperature sensor and an I2C interface.
+
+  Datasheets:
+    https://www.ti.com/product/ADC128D818
+
+properties:
+  compatible:
+    const: ti,adc128d818
+
+  reg:
+    maxItems: 1
+
+  ti,mode:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      Operation mode.
+      Mode 0  - 7 single-ended voltage readings (IN0-IN6), 1 temperature
+      reading (internal).
+      Mode 1 - 8 single-ended voltage readings (IN0-IN7), no temperature.
+      Mode 2 - 4 pseudo-differential voltage readings
+      (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6), 1 temperature reading (internal).
+      Mode 3 - 4 single-ended voltage readings (IN0-IN3), 2 pseudo-differential
+      voltage readings (IN4-IN5, IN7-IN6), 1 temperature reading (internal).
+    default: 0
+
+  vref-supply:
+    description:
+      The regulator to use as an external reference. If it does not exist, the
+      internal reference will be used.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@1d {
+            compatible = "ti,adc128d818";
+            reg = <0x1d>;
+            vref-supply = <&vref>;
+            ti,mode = /bits/ 8 <2>;
+        };
+    };

diff --git a/Bindings/hwmon/ti,lm87.yaml b/Bindings/hwmon/ti,lm87.yaml
new file mode 100644
index 0000000..f553235
--- /dev/null
+++ b/Bindings/hwmon/ti,lm87.yaml

@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,lm87.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments LM87 Hardware Monitor
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+  The LM87 is a serial interface system hardware monitor
+  with remote diode temperature sensing.
+
+  Datasheets:
+    https://www.ti.com/product/LM87
+
+properties:
+  compatible:
+    const: ti,lm87
+
+  reg:
+    maxItems: 1
+
+  has-temp3:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      This configures pins 18 and 19 to be used as a second
+      remote temperature sensing channel. By default the pins
+      are configured as voltage input pins in0 and in5.
+
+  has-in6:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      When set, pin 5 is configured to be used as voltage input
+      in6. Otherwise the pin is set as FAN1 input.
+
+  has-in7:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      When set, pin 6 is configured to be used as voltage input
+      in7. Otherwise the pin is set as FAN2 input.
+
+  vcc-supply:
+    description:
+      Regulator supplying power, can be configured to measure
+      5.0V power supply. Default is 3.3V.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hwmon@2e {
+            compatible = "ti,lm87";
+            reg = <0x2e>;
+            has-temp3;
+            vcc-supply = <&reg_5v0>;
+        };
+    };

diff --git a/Bindings/i2c/atmel,at91sam-i2c.yaml b/Bindings/i2c/atmel,at91sam-i2c.yaml
index b1c13ba..b2d19cf 100644
--- a/Bindings/i2c/atmel,at91sam-i2c.yaml
+++ b/Bindings/i2c/atmel,at91sam-i2c.yaml

@@ -77,7 +77,7 @@
   - clocks
 
 allOf:
-  - $ref: i2c-controller.yaml
+  - $ref: /schemas/i2c/i2c-controller.yaml#
   - if:
       properties:
         compatible:

diff --git a/Bindings/i2c/google,cros-ec-i2c-tunnel.yaml b/Bindings/i2c/google,cros-ec-i2c-tunnel.yaml
index ab151c9..580003c 100644
--- a/Bindings/i2c/google,cros-ec-i2c-tunnel.yaml
+++ b/Bindings/i2c/google,cros-ec-i2c-tunnel.yaml

@@ -21,7 +21,7 @@
   google,cros-ec-spi or google,cros-ec-i2c.
 
 allOf:
-  - $ref: i2c-controller.yaml#
+  - $ref: /schemas/i2c/i2c-controller.yaml#
 
 properties:
   compatible:

diff --git a/Bindings/i2c/i2c-pnx.txt b/Bindings/i2c/i2c-pnx.txt
deleted file mode 100644
index 2a59006..0000000
--- a/Bindings/i2c/i2c-pnx.txt
+++ /dev/null

@@ -1,34 +0,0 @@
-* NXP PNX I2C Controller
-
-Required properties:
-
- - reg: Offset and length of the register set for the device
- - compatible: should be "nxp,pnx-i2c"
- - interrupts: configure one interrupt line
- - #address-cells: always 1 (for i2c addresses)
- - #size-cells: always 0
-
-Optional properties:
-
- - clock-frequency: desired I2C bus clock frequency in Hz, Default: 100000 Hz
-
-Examples:
-
-	i2c1: i2c@400a0000 {
-		compatible = "nxp,pnx-i2c";
-		reg = <0x400a0000 0x100>;
-		interrupt-parent = <&mic>;
-		interrupts = <51 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	i2c2: i2c@400a8000 {
-		compatible = "nxp,pnx-i2c";
-		reg = <0x400a8000 0x100>;
-		interrupt-parent = <&mic>;
-		interrupts = <50 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-frequency = <100000>;
-	};

diff --git a/Bindings/i2c/nxp,pnx-i2c.yaml b/Bindings/i2c/nxp,pnx-i2c.yaml
new file mode 100644
index 0000000..798a693
--- /dev/null
+++ b/Bindings/i2c/nxp,pnx-i2c.yaml

@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nxp,pnx-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PNX I2C Controller
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: nxp,pnx-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    default: 100000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@400a0000 {
+        compatible = "nxp,pnx-i2c";
+        reg = <0x400a0000 0x100>;
+        interrupt-parent = <&mic>;
+        interrupts = <51 0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };

diff --git a/Bindings/i2c/qcom,i2c-cci.yaml b/Bindings/i2c/qcom,i2c-cci.yaml
index f0eabff..daf4e71 100644
--- a/Bindings/i2c/qcom,i2c-cci.yaml
+++ b/Bindings/i2c/qcom,i2c-cci.yaml

@@ -26,6 +26,7 @@
       - items:
           - enum:
               - qcom,sc7280-cci
+              - qcom,sc8280xp-cci
               - qcom,sdm845-cci
               - qcom,sm6350-cci
               - qcom,sm8250-cci
@@ -176,6 +177,24 @@
             - const: cci
             - const: cci_src
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-cci
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: camnoc_axi
+            - const: slow_ahb_src
+            - const: cpas_ahb
+            - const: cci
+
 additionalProperties: false
 
 examples:

diff --git a/Bindings/i2c/renesas,riic.yaml b/Bindings/i2c/renesas,riic.yaml
index 2291a7c..91ecf17 100644
--- a/Bindings/i2c/renesas,riic.yaml
+++ b/Bindings/i2c/renesas,riic.yaml

@@ -15,14 +15,17 @@
 
 properties:
   compatible:
-    items:
-      - enum:
-          - renesas,riic-r7s72100   # RZ/A1H
-          - renesas,riic-r7s9210    # RZ/A2M
-          - renesas,riic-r9a07g043  # RZ/G2UL and RZ/Five
-          - renesas,riic-r9a07g044  # RZ/G2{L,LC}
-          - renesas,riic-r9a07g054  # RZ/V2L
-      - const: renesas,riic-rz      # RZ/A or RZ/G2L
+    oneOf:
+      - items:
+          - enum:
+              - renesas,riic-r7s72100   # RZ/A1H
+              - renesas,riic-r7s9210    # RZ/A2M
+              - renesas,riic-r9a07g043  # RZ/G2UL and RZ/Five
+              - renesas,riic-r9a07g044  # RZ/G2{L,LC}
+              - renesas,riic-r9a07g054  # RZ/V2L
+          - const: renesas,riic-rz      # RZ/A or RZ/G2L
+
+      - const: renesas,riic-r9a09g057   # RZ/V2H(P)
 
   reg:
     maxItems: 1

diff --git a/Bindings/i2c/st,stm32-i2c.yaml b/Bindings/i2c/st,stm32-i2c.yaml
index 1b31b87..8fd8be7 100644
--- a/Bindings/i2c/st,stm32-i2c.yaml
+++ b/Bindings/i2c/st,stm32-i2c.yaml

@@ -127,6 +127,10 @@
 
   wakeup-source: true
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

diff --git a/Bindings/iio/accel/adi,adxl345.yaml b/Bindings/iio/accel/adi,adxl345.yaml
index 07cacc3..280ed47 100644
--- a/Bindings/iio/accel/adi,adxl345.yaml
+++ b/Bindings/iio/accel/adi,adxl345.yaml

@@ -32,6 +32,8 @@
 
   spi-cpol: true
 
+  spi-3wire: true
+
   interrupts:
     maxItems: 1
 

diff --git a/Bindings/iio/adc/adi,ad7173.yaml b/Bindings/iio/adc/adi,ad7173.yaml
new file mode 100644
index 0000000..ea6cfcd
--- /dev/null
+++ b/Bindings/iio/adc/adi,ad7173.yaml

@@ -0,0 +1,279 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2023 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7173.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7173 ADC
+
+maintainers:
+  - Ceclan Dumitru <dumitru.ceclan@analog.com>
+
+description: |
+  Analog Devices AD717x ADC's:
+  The AD717x family offer a complete integrated Sigma-Delta ADC solution which
+  can be used in high precision, low noise single channel applications
+  (Life Science measurements) or higher speed multiplexed applications
+  (Factory Automation PLC Input modules). The Sigma-Delta ADC is intended
+  primarily for measurement of signals close to DC but also delivers
+  outstanding performance with input bandwidths out to ~10kHz.
+
+  Datasheets for supported chips:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-2.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-4.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7173-8.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-2.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-8.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7176-2.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7177-2.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7172-2
+      - adi,ad7172-4
+      - adi,ad7173-8
+      - adi,ad7175-2
+      - adi,ad7175-8
+      - adi,ad7176-2
+      - adi,ad7177-2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: |
+          Ready: multiplexed with SPI data out. While SPI CS is low,
+          can be used to indicate the completion of a conversion.
+
+      - description: |
+          Error: The three error bits in the status register (ADC_ERROR, CRC_ERROR,
+          and REG_ERROR) are OR'ed, inverted, and mapped to the ERROR pin.
+          Therefore, the ERROR pin indicates that an error has occurred.
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: rdy
+      - const: err
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  gpio-controller:
+    description: Marks the device node as a GPIO controller.
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell is the GPIO number and the second cell specifies
+      GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
+
+  vref-supply:
+    description: |
+      Differential external reference supply used for conversion. The reference
+      voltage (Vref) specified here must be the voltage difference between the
+      REF+ and REF- pins: Vref = (REF+) - (REF-).
+
+  vref2-supply:
+    description: |
+      Differential external reference supply used for conversion. The reference
+      voltage (Vref2) specified here must be the voltage difference between the
+      REF2+ and REF2- pins: Vref2 = (REF2+) - (REF2-).
+
+  avdd-supply:
+    description: Avdd supply, can be used as reference for conversion.
+                 This supply is referenced to AVSS, voltage specified here
+                 represents (AVDD1 - AVSS).
+
+  avdd2-supply:
+    description: Avdd2 supply, used as the input to the internal voltage regulator.
+                 This supply is referenced to AVSS, voltage specified here
+                 represents (AVDD2 - AVSS).
+
+  iovdd-supply:
+    description: iovdd supply, used for the chip digital interface.
+
+  clocks:
+    maxItems: 1
+    description: |
+      Optional external clock source. Can include one clock source: external
+      clock or external crystal.
+
+  clock-names:
+    enum:
+      - ext-clk
+      - xtal
+
+  '#clock-cells':
+    const: 0
+
+patternProperties:
+  "^channel@[0-9a-f]$":
+    type: object
+    $ref: adc.yaml
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 15
+
+      diff-channels:
+        items:
+          minimum: 0
+          maximum: 31
+
+      adi,reference-select:
+        description: |
+          Select the reference source to use when converting on
+          the specific channel. Valid values are:
+          vref       : REF+  /REF−
+          vref2      : REF2+ /REF2−
+          refout-avss: REFOUT/AVSS (Internal reference)
+          avdd       : AVDD  /AVSS
+
+          External reference ref2 only available on ad7173-8 and ad7172-4.
+          Internal reference refout-avss not available on ad7172-4.
+
+          If not specified, internal reference used (if available).
+        $ref: /schemas/types.yaml#/definitions/string
+        enum:
+          - vref
+          - vref2
+          - refout-avss
+          - avdd
+        default: refout-avss
+
+    required:
+      - reg
+      - diff-channels
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+  # Only ad7172-4, ad7173-8 and ad7175-8 support vref2
+  # Other models have [0-3] channel registers
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - adi,ad7172-4
+                - adi,ad7173-8
+                - adi,ad7175-8
+    then:
+      properties:
+        vref2-supply: false
+      patternProperties:
+        "^channel@[0-9a-f]$":
+          properties:
+            adi,reference-select:
+              enum:
+                - vref
+                - refout-avss
+                - avdd
+            reg:
+              maximum: 3
+
+  # Model ad7172-4 does not support internal reference
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad7172-4
+    then:
+      patternProperties:
+        "^channel@[0-9a-f]$":
+          properties:
+            reg:
+              maximum: 7
+            adi,reference-select:
+              enum:
+                - vref
+                - vref2
+                - avdd
+          required:
+            - adi,reference-select
+
+  - if:
+      anyOf:
+        - required: [clock-names]
+        - required: [clocks]
+    then:
+      properties:
+        '#clock-cells': false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad7173-8";
+        reg = <0>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "rdy";
+        interrupt-parent = <&gpio>;
+        spi-max-frequency = <5000000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        #clock-cells = <0>;
+
+        vref-supply = <&dummy_regulator>;
+
+        channel@0 {
+          reg = <0>;
+          bipolar;
+          diff-channels = <0 1>;
+          adi,reference-select = "vref";
+        };
+
+        channel@1 {
+          reg = <1>;
+          diff-channels = <2 3>;
+        };
+
+        channel@2 {
+          reg = <2>;
+          bipolar;
+          diff-channels = <4 5>;
+        };
+
+        channel@3 {
+          reg = <3>;
+          bipolar;
+          diff-channels = <6 7>;
+        };
+
+        channel@4 {
+          reg = <4>;
+          diff-channels = <8 9>;
+          adi,reference-select = "avdd";
+        };
+      };
+    };

diff --git a/Bindings/iio/adc/adi,ad7944.yaml b/Bindings/iio/adc/adi,ad7944.yaml
new file mode 100644
index 0000000..d17d184
--- /dev/null
+++ b/Bindings/iio/adc/adi,ad7944.yaml

@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7944.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices PulSAR LFCSP Analog to Digital Converters
+
+maintainers:
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  A family of pin-compatible single channel differential analog to digital
+  converters with SPI support in a LFCSP package.
+
+  * https://www.analog.com/en/products/ad7944.html
+  * https://www.analog.com/en/products/ad7985.html
+  * https://www.analog.com/en/products/ad7986.html
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7944
+      - adi,ad7985
+      - adi,ad7986
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 111111111
+
+  spi-cpol: true
+  spi-cpha: true
+
+  adi,spi-mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ single, chain ]
+    description: |
+      This property indicates the SPI wiring configuration.
+
+      When this property is omitted, it is assumed that the device is using what
+      the datasheet calls "4-wire mode". This is the conventional SPI mode used
+      when there are multiple devices on the same bus. In this mode, the CNV
+      line is used to initiate the conversion and the SDI line is connected to
+      CS on the SPI controller.
+
+      When this property is present, it indicates that the device is using one
+      of the following alternative wiring configurations:
+
+      * single: The datasheet calls this "3-wire mode". (NOTE: The datasheet's
+        definition of 3-wire mode is NOT at all related to the standard
+        spi-3wire property!) This mode is often used when the ADC is the only
+        device on the bus. In this mode, SDI is tied to VIO, and the CNV line
+        can be connected to the CS line of the SPI controller or to a GPIO, in
+        which case the CS line of the controller is unused.
+      * chain: The datasheet calls this "chain mode". This mode is used to save
+        on wiring when multiple ADCs are used. In this mode, the SDI line of
+        one chip is tied to the SDO of the next chip in the chain and the SDI of
+        the last chip in the chain is tied to GND. Only the first chip in the
+        chain is connected to the SPI bus. The CNV line of all chips are tied
+        together. The CS line of the SPI controller can be used as the CNV line
+        only if it is active high.
+
+  '#daisy-chained-devices': true
+
+  avdd-supply:
+    description: A 2.5V supply that powers the analog circuitry.
+
+  dvdd-supply:
+    description: A 2.5V supply that powers the digital circuitry.
+
+  vio-supply:
+    description:
+      A 1.8V to 2.7V supply for the digital inputs and outputs.
+
+  bvdd-supply:
+    description:
+      A voltage supply for the buffered power. When using an external reference
+      without an internal buffer (PDREF high, REFIN low), this should be
+      connected to the same supply as ref-supply. Otherwise, when using an
+      internal reference or an external reference with an internal buffer, this
+      is connected to a 5V supply.
+
+  ref-supply:
+    description:
+      Voltage regulator for the external reference voltage (REF). This property
+      is omitted when using an internal reference.
+
+  refin-supply:
+    description:
+      Voltage regulator for the reference buffer input (REFIN). When using an
+      external buffer with internal reference, this should be connected to a
+      1.2V external reference voltage supply. Otherwise, this property is
+      omitted.
+
+  cnv-gpios:
+    description:
+      The Convert Input (CNV). This input has multiple functions. It initiates
+      the conversions and selects the SPI mode of the device (chain or CS). In
+      'single' mode, this property is omitted if the CNV pin is connected to the
+      CS line of the SPI controller.
+    maxItems: 1
+
+  turbo-gpios:
+    description:
+      GPIO connected to the TURBO line. If omitted, it is assumed that the TURBO
+      line is hard-wired and the state is determined by the adi,always-turbo
+      property.
+    maxItems: 1
+
+  adi,always-turbo:
+    type: boolean
+    description:
+      When present, this property indicates that the TURBO line is hard-wired
+      and the state is always high. If neither this property nor turbo-gpios is
+      present, the TURBO line is assumed to be hard-wired and the state is
+      always low.
+
+  interrupts:
+    description:
+      The SDO pin can also function as a busy indicator. This node should be
+      connected to an interrupt that is triggered when the SDO line goes low
+      while the SDI line is high and the CNV line is low ('single' mode) or the
+      SDI line is low and the CNV line is high ('multi' mode); or when the SDO
+      line goes high while the SDI and CNV lines are high (chain mode),
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - dvdd-supply
+  - vio-supply
+  - bvdd-supply
+
+allOf:
+  # ref-supply and refin-supply are mutually exclusive (neither is also valid)
+  - if:
+      required:
+        - ref-supply
+    then:
+      properties:
+        refin-supply: false
+  - if:
+      required:
+        - refin-supply
+    then:
+      properties:
+        ref-supply: false
+  # in '4-wire' mode, cnv-gpios is required, for other modes it is optional
+  - if:
+      not:
+        required:
+          - adi,spi-mode
+    then:
+      required:
+        - cnv-gpios
+  # chain mode has lower SCLK max rate and doesn't work when TURBO is enabled
+  - if:
+      required:
+        - adi,spi-mode
+      properties:
+        adi,spi-mode:
+          const: chain
+    then:
+      properties:
+        spi-max-frequency:
+          maximum: 90909090
+        adi,always-turbo: false
+      required:
+        - '#daisy-chained-devices'
+    else:
+      properties:
+        '#daisy-chained-devices': false
+  # turbo-gpios and adi,always-turbo are mutually exclusive
+  - if:
+      required:
+        - turbo-gpios
+    then:
+      properties:
+        adi,always-turbo: false
+  - if:
+      required:
+        - adi,always-turbo
+    then:
+      properties:
+        turbo-gpios: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@0 {
+            compatible = "adi,ad7944";
+            reg = <0>;
+            spi-cpha;
+            spi-max-frequency = <111111111>;
+            avdd-supply = <&supply_2_5V>;
+            dvdd-supply = <&supply_2_5V>;
+            vio-supply = <&supply_1_8V>;
+            bvdd-supply = <&supply_5V>;
+            cnv-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+            turbo-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+        };
+    };

diff --git a/Bindings/iio/adc/adi,axi-adc.yaml b/Bindings/iio/adc/adi,axi-adc.yaml
index 3d49d21..e1f450b 100644
--- a/Bindings/iio/adc/adi,axi-adc.yaml
+++ b/Bindings/iio/adc/adi,axi-adc.yaml

@@ -28,6 +28,9 @@
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
   dmas:
     maxItems: 1
 
@@ -48,6 +51,7 @@
   - compatible
   - dmas
   - reg
+  - clocks
 
 additionalProperties: false
 
@@ -58,6 +62,7 @@
         reg = <0x44a00000 0x10000>;
         dmas = <&rx_dma 0>;
         dma-names = "rx";
+        clocks = <&axi_clk>;
         #io-backend-cells = <0>;
     };
 ...

diff --git a/Bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml b/Bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml
index 7ef46c9..da605a0 100644
--- a/Bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml
+++ b/Bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml

@@ -11,8 +11,13 @@
 
 properties:
   compatible:
-    enum:
-      - allwinner,sun20i-d1-gpadc
+    oneOf:
+      - enum:
+          - allwinner,sun20i-d1-gpadc
+      - items:
+          - enum:
+              - allwinner,sun50i-h616-gpadc
+          - const: allwinner,sun20i-d1-gpadc
 
   "#io-channel-cells":
     const: 1

diff --git a/Bindings/iio/adc/st,stm32-adc.yaml b/Bindings/iio/adc/st,stm32-adc.yaml
index 995cbf8..ec34c48 100644
--- a/Bindings/iio/adc/st,stm32-adc.yaml
+++ b/Bindings/iio/adc/st,stm32-adc.yaml

@@ -93,6 +93,10 @@
   '#size-cells':
     const: 0
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 allOf:
   - if:
       properties:

diff --git a/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index 1970503..c1b1324 100644
--- a/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml

@@ -59,6 +59,10 @@
       If not, SPI CLKOUT frequency will not be accurate.
     maximum: 20000000
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

diff --git a/Bindings/iio/dac/adi,ad3552r.yaml b/Bindings/iio/dac/adi,ad3552r.yaml
index 96340a0..8265d70 100644
--- a/Bindings/iio/dac/adi,ad3552r.yaml
+++ b/Bindings/iio/dac/adi,ad3552r.yaml

@@ -139,7 +139,7 @@
                 Voltage output range of the channel as <minimum, maximum>
                 Required connections:
                   Rfb1x for: 0 to 2.5 V; 0 to 3V; 0 to 5 V;
-                  Rfb2x for: 0 to 10 V; 2.5 to 7.5V; -5 to 5 V;
+                  Rfb2x for: 0 to 10 V; -2.5 to 7.5V; -5 to 5 V;
               oneOf:
                 - items:
                     - const: 0

diff --git a/Bindings/iio/dac/adi,ad9739a.yaml b/Bindings/iio/dac/adi,ad9739a.yaml
new file mode 100644
index 0000000..c0b3647
--- /dev/null
+++ b/Bindings/iio/dac/adi,ad9739a.yaml

@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad9739a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD9739A RF DAC
+
+maintainers:
+  - Dragos Bogdan <dragos.bogdan@analog.com>
+  - Nuno Sa <nuno.sa@analog.com>
+
+description: |
+  The AD9739A is a 14-bit, 2.5 GSPS high performance RF DACs that are capable
+  of synthesizing wideband signals from dc up to 3 GHz.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad9737a_9739a.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad9739a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-3p3-supply:
+    description: 3.3V Digital input supply.
+
+  vdd-supply:
+    description: 1.8V Digital input supply.
+
+  vdda-supply:
+    description: 3.3V Analog input supply.
+
+  vddc-supply:
+    description: 1.8V Clock input supply.
+
+  vref-supply:
+    description: Input/Output reference supply.
+
+  io-backends:
+    maxItems: 1
+
+  adi,full-scale-microamp:
+    description: This property represents the DAC full scale current.
+    minimum: 8580
+    maximum: 31700
+    default: 20000
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - io-backends
+  - vdd-3p3-supply
+  - vdd-supply
+  - vdda-supply
+  - vddc-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad9739a";
+            reg = <0>;
+
+            clocks = <&dac_clk>;
+
+            io-backends = <&iio_backend>;
+
+            vdd-3p3-supply = <&vdd_3_3>;
+            vdd-supply = <&vdd>;
+            vdda-supply = <&vdd_3_3>;
+            vddc-supply = <&vdd>;
+        };
+    };
+...

diff --git a/Bindings/iio/dac/adi,axi-dac.yaml b/Bindings/iio/dac/adi,axi-dac.yaml
new file mode 100644
index 0000000..a55e9bf
--- /dev/null
+++ b/Bindings/iio/dac/adi,axi-dac.yaml

@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,axi-dac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI DAC IP core
+
+maintainers:
+  - Nuno Sa <nuno.sa@analog.com>
+
+description: |
+  Analog Devices Generic AXI DAC IP core for interfacing a DAC device
+  with a high speed serial (JESD204B/C) or source synchronous parallel
+  interface (LVDS/CMOS).
+  Usually, some other interface type (i.e SPI) is used as a control
+  interface for the actual DAC, while this IP core will interface
+  to the data-lines of the DAC and handle the streaming of data from
+  memory via DMA into the DAC.
+
+  https://wiki.analog.com/resources/fpga/docs/axi_dac_ip
+
+properties:
+  compatible:
+    enum:
+      - adi,axi-dac-9.1.b
+
+  reg:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: tx
+
+  clocks:
+    maxItems: 1
+
+  '#io-backend-cells':
+    const: 0
+
+required:
+  - compatible
+  - dmas
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    dac@44a00000 {
+        compatible = "adi,axi-dac-9.1.b";
+        reg = <0x44a00000 0x10000>;
+        dmas = <&tx_dma 0>;
+        dma-names = "tx";
+        #io-backend-cells = <0>;
+        clocks = <&axi_clk>;
+    };
+...

diff --git a/Bindings/iio/dac/st,stm32-dac.yaml b/Bindings/iio/dac/st,stm32-dac.yaml
index 04045b9..b15de4e 100644
--- a/Bindings/iio/dac/st,stm32-dac.yaml
+++ b/Bindings/iio/dac/st,stm32-dac.yaml

@@ -45,6 +45,10 @@
   '#size-cells':
     const: 0
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 additionalProperties: false
 
 required:

diff --git a/Bindings/iio/dac/ti,dac5571.yaml b/Bindings/iio/dac/ti,dac5571.yaml
index 79da032..e59db86 100644
--- a/Bindings/iio/dac/ti,dac5571.yaml
+++ b/Bindings/iio/dac/ti,dac5571.yaml

@@ -21,6 +21,7 @@
       - ti,dac5573
       - ti,dac6573
       - ti,dac7573
+      - ti,dac081c081
       - ti,dac121c081
 
   reg:

diff --git a/Bindings/iio/health/maxim,max30102.yaml b/Bindings/iio/health/maxim,max30102.yaml
index eed0df9..205d352 100644
--- a/Bindings/iio/health/maxim,max30102.yaml
+++ b/Bindings/iio/health/maxim,max30102.yaml

@@ -4,16 +4,20 @@
 $id: http://devicetree.org/schemas/iio/health/maxim,max30102.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Maxim MAX30102 heart rate and pulse oximeter and MAX30105 particle-sensor
+title: Maxim MAX30101/2 heart rate and pulse oximeter and MAX30105 particle-sensor
 
 maintainers:
   - Matt Ranostay <matt.ranostay@konsulko.com>
 
 properties:
   compatible:
-    enum:
-      - maxim,max30102
-      - maxim,max30105
+    oneOf:
+      - enum:
+          - maxim,max30102
+          - maxim,max30105
+      - items:
+          - const: maxim,max30101
+          - const: maxim,max30105
 
   reg:
     maxItems: 1

diff --git a/Bindings/iio/humidity/ti,hdc3020.yaml b/Bindings/iio/humidity/ti,hdc3020.yaml
index 8b5dedd..b375d30 100644
--- a/Bindings/iio/humidity/ti,hdc3020.yaml
+++ b/Bindings/iio/humidity/ti,hdc3020.yaml

@@ -34,6 +34,9 @@
   reg:
     maxItems: 1
 
+  reset-gpios:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -43,6 +46,7 @@
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
@@ -54,5 +58,6 @@
             vdd-supply = <&vcc_3v3>;
             interrupt-parent = <&gpio3>;
             interrupts = <23 IRQ_TYPE_EDGE_RISING>;
+            reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
         };
     };

diff --git a/Bindings/iio/imu/invensense,icm42600.yaml b/Bindings/iio/imu/invensense,icm42600.yaml
index 7cd05bc..3769f8e 100644
--- a/Bindings/iio/imu/invensense,icm42600.yaml
+++ b/Bindings/iio/imu/invensense,icm42600.yaml

@@ -32,6 +32,8 @@
       - invensense,icm42605
       - invensense,icm42622
       - invensense,icm42631
+      - invensense,icm42686
+      - invensense,icm42688
 
   reg:
     maxItems: 1

diff --git a/Bindings/iio/imu/invensense,mpu6050.yaml b/Bindings/iio/imu/invensense,mpu6050.yaml
index 297b8a1..587ff2b 100644
--- a/Bindings/iio/imu/invensense,mpu6050.yaml
+++ b/Bindings/iio/imu/invensense,mpu6050.yaml

@@ -62,14 +62,15 @@
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
-      not:
-        properties:
-          compatible:
-            contains:
-              enum:
-                - invensense,mpu9150
-                - invensense,mpu9250
-                - invensense,mpu9255
+      properties:
+        compatible:
+          contains:
+            enum:
+              - invensense,iam20680
+              - invensense,icm20602
+              - invensense,icm20608
+              - invensense,icm20609
+              - invensense,icm20689
     then:
       properties:
         i2c-gate: false

diff --git a/Bindings/iio/light/avago,apds9300.yaml b/Bindings/iio/light/avago,apds9300.yaml
index 206af44..b750096 100644
--- a/Bindings/iio/light/avago,apds9300.yaml
+++ b/Bindings/iio/light/avago,apds9300.yaml

@@ -4,17 +4,22 @@
 $id: http://devicetree.org/schemas/iio/light/avago,apds9300.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Avago APDS9300 ambient light sensor
+title: Avago Gesture/RGB/ALS/Proximity sensors
 
 maintainers:
-  - Jonathan Cameron <jic23@kernel.org>
+  - Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
 
 description: |
-  Datasheet at https://www.avagotech.com/docs/AV02-1077EN
+  Datasheet: https://www.avagotech.com/docs/AV02-1077EN
+  Datasheet: https://www.avagotech.com/docs/AV02-4191EN
+  Datasheet: https://www.avagotech.com/docs/AV02-4755EN
 
 properties:
   compatible:
-    const: avago,apds9300
+    enum:
+      - avago,apds9300
+      - avago,apds9306
+      - avago,apds9960
 
   reg:
     maxItems: 1
@@ -22,6 +27,8 @@
   interrupts:
     maxItems: 1
 
+  vdd-supply: true
+
 additionalProperties: false
 
 required:
@@ -30,6 +37,8 @@
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -38,7 +47,8 @@
             compatible = "avago,apds9300";
             reg = <0x39>;
             interrupt-parent = <&gpio2>;
-            interrupts = <29 8>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+            vdd-supply = <&regulator_3v3>;
         };
     };
 ...

diff --git a/Bindings/iio/light/avago,apds9960.yaml b/Bindings/iio/light/avago,apds9960.yaml
deleted file mode 100644
index f06e0fd..0000000
--- a/Bindings/iio/light/avago,apds9960.yaml
+++ /dev/null

@@ -1,44 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/iio/light/avago,apds9960.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Avago APDS9960 gesture/RGB/ALS/proximity sensor
-
-maintainers:
-  - Matt Ranostay <matt.ranostay@konsulko.com>
-
-description: |
-  Datasheet at https://www.avagotech.com/docs/AV02-4191EN
-
-properties:
-  compatible:
-    const: avago,apds9960
-
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
-
-additionalProperties: false
-
-required:
-  - compatible
-  - reg
-
-examples:
-  - |
-    i2c {
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        light-sensor@39 {
-            compatible = "avago,apds9960";
-            reg = <0x39>;
-            interrupt-parent = <&gpio1>;
-            interrupts = <16 1>;
-        };
-    };
-...

diff --git a/Bindings/iio/temperature/adi,ltc2983.yaml b/Bindings/iio/temperature/adi,ltc2983.yaml
index dbb8513..312febe 100644
--- a/Bindings/iio/temperature/adi,ltc2983.yaml
+++ b/Bindings/iio/temperature/adi,ltc2983.yaml

@@ -57,6 +57,8 @@
   interrupts:
     maxItems: 1
 
+  vdd-supply: true
+
   adi,mux-delay-config-us:
     description: |
       Extra delay prior to each conversion, in addition to the internal 1ms
@@ -460,6 +462,7 @@
   - compatible
   - reg
   - interrupts
+  - vdd-supply
 
 additionalProperties: false
 
@@ -489,6 +492,7 @@
             #address-cells = <1>;
             #size-cells = <0>;
 
+            vdd-supply = <&supply>;
             interrupts = <20 IRQ_TYPE_EDGE_RISING>;
             interrupt-parent = <&gpio>;
 

diff --git a/Bindings/input/azoteq,iqs7222.yaml b/Bindings/input/azoteq,iqs7222.yaml
index 5b1769c1..418c168 100644
--- a/Bindings/input/azoteq,iqs7222.yaml
+++ b/Bindings/input/azoteq,iqs7222.yaml

@@ -784,7 +784,7 @@
       gpio-2: GPIO4
 
     allOf:
-      - $ref: ../pinctrl/pincfg-node.yaml#
+      - $ref: /schemas/pinctrl/pincfg-node.yaml#
 
     properties:
       drive-open-drain: true

diff --git a/Bindings/input/elan,ekth6915.yaml b/Bindings/input/elan,ekth6915.yaml
index dc4ac41..a62916d 100644
--- a/Bindings/input/elan,ekth6915.yaml
+++ b/Bindings/input/elan,ekth6915.yaml

@@ -18,9 +18,12 @@
 
 properties:
   compatible:
-    enum:
-      - elan,ekth6915
-      - ilitek,ili2901
+    oneOf:
+      - items:
+          - enum:
+              - elan,ekth5015m
+          - const: elan,ekth6915
+      - const: elan,ekth6915
 
   reg:
     const: 0x10
@@ -33,6 +36,12 @@
   reset-gpios:
     description: Reset GPIO; not all touchscreens using eKTH6915 hook this up.
 
+  no-reset-on-power-off:
+    type: boolean
+    description:
+      Reset line is wired so that it can (and should) be left deasserted when
+      the power supply is off.
+
   vcc33-supply:
     description: The 3.3V supply to the touchscreen.
 
@@ -58,8 +67,8 @@
       #address-cells = <1>;
       #size-cells = <0>;
 
-      ap_ts: touchscreen@10 {
-        compatible = "elan,ekth6915";
+      touchscreen@10 {
+        compatible = "elan,ekth5015m", "elan,ekth6915";
         reg = <0x10>;
 
         interrupt-parent = <&tlmm>;

diff --git a/Bindings/input/ilitek,ili2901.yaml b/Bindings/input/ilitek,ili2901.yaml
new file mode 100644
index 0000000..1abeec7
--- /dev/null
+++ b/Bindings/input/ilitek,ili2901.yaml

@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ilitek,ili2901.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI2901 touchscreen controller
+
+maintainers:
+  - Jiri Kosina <jkosina@suse.com>
+
+description:
+  Supports the Ilitek ILI2901 touchscreen controller.
+  This touchscreen controller uses the i2c-hid protocol with a reset GPIO.
+
+allOf:
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ilitek,ili2901
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  panel: true
+
+  reset-gpios:
+    maxItems: 1
+
+  vcc33-supply: true
+
+  vccio-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vcc33-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touchscreen@41 {
+        compatible = "ilitek,ili2901";
+        reg = <0x41>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+        reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+        vcc33-supply = <&pp3300_ts>;
+      };
+    };

diff --git a/Bindings/input/qcom,pm8xxx-vib.yaml b/Bindings/input/qcom,pm8xxx-vib.yaml
index c8832cd..2025d6a 100644
--- a/Bindings/input/qcom,pm8xxx-vib.yaml
+++ b/Bindings/input/qcom,pm8xxx-vib.yaml

@@ -11,10 +11,18 @@
 
 properties:
   compatible:
-    enum:
-      - qcom,pm8058-vib
-      - qcom,pm8916-vib
-      - qcom,pm8921-vib
+    oneOf:
+      - enum:
+          - qcom,pm8058-vib
+          - qcom,pm8916-vib
+          - qcom,pm8921-vib
+          - qcom,pmi632-vib
+      - items:
+          - enum:
+              - qcom,pm7250b-vib
+              - qcom,pm7325b-vib
+              - qcom,pm7550ba-vib
+          - const: qcom,pmi632-vib
 
   reg:
     maxItems: 1

diff --git a/Bindings/input/touchscreen/edt-ft5x06.yaml b/Bindings/input/touchscreen/edt-ft5x06.yaml
index f2808cb..745e57c 100644
--- a/Bindings/input/touchscreen/edt-ft5x06.yaml
+++ b/Bindings/input/touchscreen/edt-ft5x06.yaml

@@ -39,7 +39,9 @@
       - edt,edt-ft5406
       - edt,edt-ft5506
       - evervision,ev-ft5726
+      - focaltech,ft5452
       - focaltech,ft6236
+      - focaltech,ft8719
 
   reg:
     maxItems: 1

diff --git a/Bindings/input/twl4030-pwrbutton.txt b/Bindings/input/twl4030-pwrbutton.txt
deleted file mode 100644
index 6c201a2..0000000
--- a/Bindings/input/twl4030-pwrbutton.txt
+++ /dev/null

@@ -1,21 +0,0 @@
-Texas Instruments TWL family (twl4030) pwrbutton module
-
-This module is part of the TWL4030. For more details about the whole
-chip see Documentation/devicetree/bindings/mfd/ti,twl.yaml.
-
-This module provides a simple power button event via an Interrupt.
-
-Required properties:
-- compatible: should be one of the following
-   - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
-- interrupts: should be one of the following
-   - <8>: For controllers compatible with twl4030
-
-Example:
-
-&twl {
-	twl_pwrbutton: pwrbutton {
-		compatible = "ti,twl4030-pwrbutton";
-		interrupts = <8>;
-	};
-};

diff --git a/Bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml b/Bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
index 8360318..f49b43f 100644
--- a/Bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
+++ b/Bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml

@@ -25,12 +25,12 @@
       - const: allwinner,sun6i-a31-sc-nmi
         deprecated: true
       - const: allwinner,sun7i-a20-sc-nmi
-      - items:
-          - const: allwinner,sun8i-v3s-nmi
-          - const: allwinner,sun9i-a80-nmi
       - const: allwinner,sun9i-a80-nmi
       - items:
-          - const: allwinner,sun50i-a100-nmi
+          - enum:
+              - allwinner,sun8i-v3s-nmi
+              - allwinner,sun50i-a100-nmi
+              - allwinner,sun50i-h616-nmi
           - const: allwinner,sun9i-a80-nmi
 
   reg:

diff --git a/Bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml b/Bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml
index e1a379c..123d24b 100644
--- a/Bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml
+++ b/Bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml

@@ -48,7 +48,7 @@
   interrupt-controller: true
 
   "#interrupt-cells":
-    $ref: "arm,gic.yaml#/properties/#interrupt-cells"
+    $ref: arm,gic.yaml#/properties/#interrupt-cells
 
 required:
   - reg

diff --git a/Bindings/interrupt-controller/renesas,irqc.yaml b/Bindings/interrupt-controller/renesas,irqc.yaml
index b417341..fb3c29e 100644
--- a/Bindings/interrupt-controller/renesas,irqc.yaml
+++ b/Bindings/interrupt-controller/renesas,irqc.yaml

@@ -39,6 +39,7 @@
           - renesas,intc-ex-r8a779a0    # R-Car V3U
           - renesas,intc-ex-r8a779f0    # R-Car S4-8
           - renesas,intc-ex-r8a779g0    # R-Car V4H
+          - renesas,intc-ex-r8a779h0    # R-Car V4M
       - const: renesas,irqc
 
   '#interrupt-cells':

diff --git a/Bindings/interrupt-controller/riscv,aplic.yaml b/Bindings/interrupt-controller/riscv,aplic.yaml
new file mode 100644
index 0000000..190a649
--- /dev/null
+++ b/Bindings/interrupt-controller/riscv,aplic.yaml

@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/riscv,aplic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V Advanced Platform Level Interrupt Controller (APLIC)
+
+maintainers:
+  - Anup Patel <anup@brainfault.org>
+
+description:
+  The RISC-V advanced interrupt architecture (AIA) defines an advanced
+  platform level interrupt controller (APLIC) for handling wired interrupts
+  in a RISC-V platform. The RISC-V AIA specification can be found at
+  https://github.com/riscv/riscv-aia.
+
+  The RISC-V APLIC is implemented as hierarchical APLIC domains where all
+  interrupt sources connect to the root APLIC domain and a parent APLIC
+  domain can delegate interrupt sources to it's child APLIC domains. There
+  is one device tree node for each APLIC domain.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qemu,aplic
+      - const: riscv,aplic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts-extended:
+    minItems: 1
+    maxItems: 16384
+    description:
+      Given APLIC domain directly injects external interrupts to a set of
+      RISC-V HARTS (or CPUs). Each node pointed to should be a riscv,cpu-intc
+      node, which has a CPU node (i.e. RISC-V HART) as parent.
+
+  msi-parent:
+    description:
+      Given APLIC domain forwards wired interrupts as MSIs to a AIA incoming
+      message signaled interrupt controller (IMSIC). If both "msi-parent" and
+      "interrupts-extended" properties are present then it means the APLIC
+      domain supports both MSI mode and Direct mode in HW. In this case, the
+      APLIC driver has to choose between MSI mode or Direct mode.
+
+  riscv,num-sources:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 1023
+    description:
+      Specifies the number of wired interrupt sources supported by this
+      APLIC domain.
+
+  riscv,children:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 1024
+    items:
+      maxItems: 1
+    description:
+      A list of child APLIC domains for the given APLIC domain. Each child
+      APLIC domain is assigned a child index in increasing order, with the
+      first child APLIC domain assigned child index 0. The APLIC domain child
+      index is used by firmware to delegate interrupts from the given APLIC
+      domain to a particular child APLIC domain.
+
+  riscv,delegation:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 1024
+    items:
+      items:
+        - description: child APLIC domain phandle
+        - description: first interrupt number of the parent APLIC domain (inclusive)
+        - description: last interrupt number of the parent APLIC domain (inclusive)
+    description:
+      A interrupt delegation list where each entry is a triple consisting
+      of child APLIC domain phandle, first interrupt number of the parent
+      APLIC domain, and last interrupt number of the parent APLIC domain.
+      Firmware must configure interrupt delegation registers based on
+      interrupt delegation list.
+
+dependencies:
+  riscv,delegation: [ "riscv,children" ]
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - riscv,num-sources
+
+anyOf:
+  - required:
+      - interrupts-extended
+  - required:
+      - msi-parent
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // Example 1 (APLIC domains directly injecting interrupt to HARTs):
+
+    interrupt-controller@c000000 {
+      compatible = "qemu,aplic", "riscv,aplic";
+      interrupts-extended = <&cpu1_intc 11>,
+                            <&cpu2_intc 11>,
+                            <&cpu3_intc 11>,
+                            <&cpu4_intc 11>;
+      reg = <0xc000000 0x4080>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      riscv,num-sources = <63>;
+      riscv,children = <&aplic1>, <&aplic2>;
+      riscv,delegation = <&aplic1 1 63>;
+    };
+
+    aplic1: interrupt-controller@d000000 {
+      compatible = "qemu,aplic", "riscv,aplic";
+      interrupts-extended = <&cpu1_intc 9>,
+                            <&cpu2_intc 9>;
+      reg = <0xd000000 0x4080>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      riscv,num-sources = <63>;
+    };
+
+    aplic2: interrupt-controller@e000000 {
+      compatible = "qemu,aplic", "riscv,aplic";
+      interrupts-extended = <&cpu3_intc 9>,
+                            <&cpu4_intc 9>;
+      reg = <0xe000000 0x4080>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      riscv,num-sources = <63>;
+    };
+
+  - |
+    // Example 2 (APLIC domains forwarding interrupts as MSIs):
+
+    interrupt-controller@c000000 {
+      compatible = "qemu,aplic", "riscv,aplic";
+      msi-parent = <&imsic_mlevel>;
+      reg = <0xc000000 0x4000>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      riscv,num-sources = <63>;
+      riscv,children = <&aplic3>;
+      riscv,delegation = <&aplic3 1 63>;
+    };
+
+    aplic3: interrupt-controller@d000000 {
+      compatible = "qemu,aplic", "riscv,aplic";
+      msi-parent = <&imsic_slevel>;
+      reg = <0xd000000 0x4000>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      riscv,num-sources = <63>;
+    };
+...

diff --git a/Bindings/interrupt-controller/riscv,imsics.yaml b/Bindings/interrupt-controller/riscv,imsics.yaml
new file mode 100644
index 0000000..84976f1
--- /dev/null
+++ b/Bindings/interrupt-controller/riscv,imsics.yaml

@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/riscv,imsics.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V Incoming MSI Controller (IMSIC)
+
+maintainers:
+  - Anup Patel <anup@brainfault.org>
+
+description: |
+  The RISC-V advanced interrupt architecture (AIA) defines a per-CPU incoming
+  MSI controller (IMSIC) for handling MSIs in a RISC-V platform. The RISC-V
+  AIA specification can be found at https://github.com/riscv/riscv-aia.
+
+  The IMSIC is a per-CPU (or per-HART) device with separate interrupt file
+  for each privilege level (machine or supervisor). The configuration of
+  a IMSIC interrupt file is done using AIA CSRs and it also has a 4KB MMIO
+  space to receive MSIs from devices. Each IMSIC interrupt file supports a
+  fixed number of interrupt identities (to distinguish MSIs from devices)
+  which is same for given privilege level across CPUs (or HARTs).
+
+  The device tree of a RISC-V platform will have one IMSIC device tree node
+  for each privilege level (machine or supervisor) which collectively describe
+  IMSIC interrupt files at that privilege level across CPUs (or HARTs).
+
+  The arrangement of IMSIC interrupt files in MMIO space of a RISC-V platform
+  follows a particular scheme defined by the RISC-V AIA specification. A IMSIC
+  group is a set of IMSIC interrupt files co-located in MMIO space and we can
+  have multiple IMSIC groups (i.e. clusters, sockets, chiplets, etc) in a
+  RISC-V platform. The MSI target address of a IMSIC interrupt file at given
+  privilege level (machine or supervisor) encodes group index, HART index,
+  and guest index (shown below).
+
+  XLEN-1            > (HART Index MSB)                  12    0
+  |                  |                                  |     |
+  -------------------------------------------------------------
+  |xxxxxx|Group Index|xxxxxxxxxxx|HART Index|Guest Index|  0  |
+  -------------------------------------------------------------
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qemu,imsics
+      - const: riscv,imsics
+
+  reg:
+    minItems: 1
+    maxItems: 16384
+    description:
+      Base address of each IMSIC group.
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 0
+
+  msi-controller: true
+
+  "#msi-cells":
+    const: 0
+
+  interrupts-extended:
+    minItems: 1
+    maxItems: 16384
+    description:
+      This property represents the set of CPUs (or HARTs) for which given
+      device tree node describes the IMSIC interrupt files. Each node pointed
+      to should be a riscv,cpu-intc node, which has a CPU node (i.e. RISC-V
+      HART) as parent.
+
+  riscv,num-ids:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 63
+    maximum: 2047
+    description:
+      Number of interrupt identities supported by IMSIC interrupt file.
+
+  riscv,num-guest-ids:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 63
+    maximum: 2047
+    description:
+      Number of interrupt identities are supported by IMSIC guest interrupt
+      file. When not specified it is assumed to be same as specified by the
+      riscv,num-ids property.
+
+  riscv,guest-index-bits:
+    minimum: 0
+    maximum: 7
+    default: 0
+    description:
+      Number of guest index bits in the MSI target address.
+
+  riscv,hart-index-bits:
+    minimum: 0
+    maximum: 15
+    description:
+      Number of HART index bits in the MSI target address. When not
+      specified it is calculated based on the interrupts-extended property.
+
+  riscv,group-index-bits:
+    minimum: 0
+    maximum: 7
+    default: 0
+    description:
+      Number of group index bits in the MSI target address.
+
+  riscv,group-index-shift:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 55
+    default: 24
+    description:
+      The least significant bit position of the group index bits in the
+      MSI target address.
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - msi-controller
+  - "#msi-cells"
+  - interrupts-extended
+  - riscv,num-ids
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // Example 1 (Machine-level IMSIC files with just one group):
+
+    interrupt-controller@24000000 {
+      compatible = "qemu,imsics", "riscv,imsics";
+      interrupts-extended = <&cpu1_intc 11>,
+                            <&cpu2_intc 11>,
+                            <&cpu3_intc 11>,
+                            <&cpu4_intc 11>;
+      reg = <0x28000000 0x4000>;
+      interrupt-controller;
+      #interrupt-cells = <0>;
+      msi-controller;
+      #msi-cells = <0>;
+      riscv,num-ids = <127>;
+    };
+
+  - |
+    // Example 2 (Supervisor-level IMSIC files with two groups):
+
+    interrupt-controller@28000000 {
+      compatible = "qemu,imsics", "riscv,imsics";
+      interrupts-extended = <&cpu1_intc 9>,
+                            <&cpu2_intc 9>,
+                            <&cpu3_intc 9>,
+                            <&cpu4_intc 9>;
+      reg = <0x28000000 0x2000>, /* Group0 IMSICs */
+            <0x29000000 0x2000>; /* Group1 IMSICs */
+      interrupt-controller;
+      #interrupt-cells = <0>;
+      msi-controller;
+      #msi-cells = <0>;
+      riscv,num-ids = <127>;
+      riscv,group-index-bits = <1>;
+      riscv,group-index-shift = <24>;
+    };
+...

diff --git a/Bindings/interrupt-controller/st,stm32-exti.yaml b/Bindings/interrupt-controller/st,stm32-exti.yaml
index 00c10a8..9967e57 100644
--- a/Bindings/interrupt-controller/st,stm32-exti.yaml
+++ b/Bindings/interrupt-controller/st,stm32-exti.yaml

@@ -89,8 +89,23 @@
         reg = <0x5000d000 0x400>;
     };
 
+  - |
     //Example 2
-    exti2: interrupt-controller@40013c00 {
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    exti2: interrupt-controller@5000d000 {
+        compatible = "st,stm32mp1-exti", "syscon";
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        reg = <0x5000d000 0x400>;
+        interrupts-extended =
+            <&intc GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+            <0>,
+            <&intc GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+  - |
+    //Example 3
+    exti3: interrupt-controller@40013c00 {
         compatible = "st,stm32-exti";
         interrupt-controller;
         #interrupt-cells = <2>;

diff --git a/Bindings/iommu/qcom,tbu.yaml b/Bindings/iommu/qcom,tbu.yaml
new file mode 100644
index 0000000..82dfe93
--- /dev/null
+++ b/Bindings/iommu/qcom,tbu.yaml

@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/qcom,tbu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm TBU (Translation Buffer Unit)
+
+maintainers:
+  - Georgi Djakov <quic_c_gdjako@quicinc.com>
+
+description:
+  The Qualcomm SMMU500 implementation consists of TCU and TBU. The TBU contains
+  a Translation Lookaside Buffer (TLB) that caches page tables. TBUs provides
+  debug features to trace and trigger debug transactions. There are multiple TBU
+  instances with each client core.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-tbu
+      - qcom,sdm845-tbu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  qcom,stream-id-range:
+    description: |
+      Phandle of a SMMU device and Stream ID range (address and size) that
+      is assigned by the TBU
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle of a smmu node
+          - description: stream id base address
+          - description: stream id size
+
+required:
+  - compatible
+  - reg
+  - qcom,stream-id-range
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interconnect/qcom,sdm845.h>
+
+    tbu@150e1000 {
+        compatible = "qcom,sdm845-tbu";
+        reg = <0x150e1000 0x1000>;
+        clocks = <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+        interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+                         &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+        power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_PCIE_TBU_GDSC>;
+        qcom,stream-id-range = <&apps_smmu 0x1c00 0x400>;
+    };
+...

diff --git a/Bindings/iommu/renesas,ipmmu-vmsa.yaml b/Bindings/iommu/renesas,ipmmu-vmsa.yaml
index be90f68..0acaa2b 100644
--- a/Bindings/iommu/renesas,ipmmu-vmsa.yaml
+++ b/Bindings/iommu/renesas,ipmmu-vmsa.yaml

@@ -50,6 +50,7 @@
               - renesas,ipmmu-r8a779a0           # R-Car V3U
               - renesas,ipmmu-r8a779f0           # R-Car S4-8
               - renesas,ipmmu-r8a779g0           # R-Car V4H
+              - renesas,ipmmu-r8a779h0           # R-Car V4M
           - const: renesas,rcar-gen4-ipmmu-vmsa  # R-Car Gen4
 
   reg:

diff --git a/Bindings/leds/leds-qcom-lpg.yaml b/Bindings/leds/leds-qcom-lpg.yaml
index 54a428d..8b82c45 100644
--- a/Bindings/leds/leds-qcom-lpg.yaml
+++ b/Bindings/leds/leds-qcom-lpg.yaml

@@ -27,11 +27,16 @@
           - qcom,pm8994-lpg
           - qcom,pmc8180c-lpg
           - qcom,pmi632-lpg
+          - qcom,pmi8950-pwm
           - qcom,pmi8994-lpg
           - qcom,pmi8998-lpg
           - qcom,pmk8550-pwm
       - items:
           - enum:
+              - qcom,pm6150l-lpg
+          - const: qcom,pm8150l-lpg
+      - items:
+          - enum:
               - qcom,pm8550-pwm
           - const: qcom,pm8350c-pwm
 
@@ -142,6 +147,7 @@
               - qcom,pm8941-lpg
               - qcom,pm8994-lpg
               - qcom,pmc8180c-lpg
+              - qcom,pmi8950-pwm
               - qcom,pmi8994-lpg
               - qcom,pmi8998-lpg
               - qcom,pmk8550-pwm
@@ -290,5 +296,3 @@
         label = "blue";
       };
     };
-
-...

diff --git a/Bindings/leds/nxp,pca963x.yaml b/Bindings/leds/nxp,pca963x.yaml
new file mode 100644
index 0000000..938d0e4
--- /dev/null
+++ b/Bindings/leds/nxp,pca963x.yaml

@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/nxp,pca963x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA963x LED controllers
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  The NXP PCA963x are I2C-controlled LED drivers optimized for
+  Red/Green/Blue/Amber (RGBA) color mixing applications. Each LED is
+  individually controllable and has its own PWM controller.
+
+  Datasheets are available at
+
+  - https://www.nxp.com/docs/en/data-sheet/PCA9632.pdf
+  - https://www.nxp.com/docs/en/data-sheet/PCA9633.pdf
+  - https://www.nxp.com/docs/en/data-sheet/PCA9634.pdf
+  - https://www.nxp.com/docs/en/data-sheet/PCA9635.pdf
+
+properties:
+  compatible:
+    enum:
+      - nxp,pca9632
+      - nxp,pca9633
+      - nxp,pca9634
+      - nxp,pca9635
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  nxp,hw-blink:
+    type: boolean
+    description:
+      Use hardware blinking instead of software blinking
+
+  nxp,inverted-out:
+    type: boolean
+    description:
+      Invert the polarity of the generated PWM.
+
+  nxp,period-scale:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      In some configurations, the chip blinks faster than expected. This
+      parameter provides a scaling ratio (fixed point, decimal divided by 1000)
+      to compensate, e.g. 1300=1.3x and 750=0.75x.
+
+  nxp,totem-pole:
+    type: boolean
+    description:
+      Use totem pole (push-pull) instead of open-drain (pca9632 defaults to
+      open-drain, newer chips to totem pole).
+
+patternProperties:
+  "^led@[0-9a-f]+$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+
+    required:
+      - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nxp,pca9632
+              - nxp,pca9633
+    then:
+      patternProperties:
+        "^led@[0-9a-f]+$":
+          properties:
+            reg:
+              maximum: 3
+    else:
+      patternProperties:
+        "^led@[0-9a-f]+$":
+          properties:
+            reg:
+              maximum: 7
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@62 {
+            compatible = "nxp,pca9632";
+            reg = <0x62>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@0 {
+                    reg = <0>;
+                    color = <LED_COLOR_ID_RED>;
+                    function = LED_FUNCTION_STATUS;
+            };
+
+            led@1 {
+                    reg = <1>;
+                    color = <LED_COLOR_ID_GREEN>;
+                    function = LED_FUNCTION_STATUS;
+            };
+
+            led@2 {
+                    reg = <2>;
+                    color = <LED_COLOR_ID_BLUE>;
+                    function = LED_FUNCTION_STATUS;
+            };
+
+            led@3 {
+                    reg = <3>;
+                    color = <LED_COLOR_ID_WHITE>;
+                    function = LED_FUNCTION_STATUS;
+            };
+        };
+    };
+
+...

diff --git a/Bindings/leds/pca963x.txt b/Bindings/leds/pca963x.txt
deleted file mode 100644
index 4eee414..0000000
--- a/Bindings/leds/pca963x.txt
+++ /dev/null

@@ -1,52 +0,0 @@
-LEDs connected to pca9632, pca9633 or pca9634
-
-Required properties:
-- compatible : should be : "nxp,pca9632", "nxp,pca9633", "nxp,pca9634" or "nxp,pca9635"
-
-Optional properties:
-- nxp,totem-pole : use totem pole (push-pull) instead of open-drain (pca9632 defaults
-  to open-drain, newer chips to totem pole)
-- nxp,hw-blink : use hardware blinking instead of software blinking
-- nxp,period-scale : In some configurations, the chip blinks faster than expected.
-		     This parameter provides a scaling ratio (fixed point, decimal divided
-		     by 1000) to compensate, e.g. 1300=1.3x and 750=0.75x.
-- nxp,inverted-out: invert the polarity of the generated PWM
-
-Each led is represented as a sub-node of the nxp,pca963x device.
-
-LED sub-node properties:
-- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
-- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633,
-		0 to 7 in pca9634, or 0 to 15 in pca9635)
-- linux,default-trigger : (optional)
-   see Documentation/devicetree/bindings/leds/common.txt
-
-Examples:
-
-pca9632: pca9632 {
-	compatible = "nxp,pca9632";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0x62>;
-
-	red@0 {
-		label = "red";
-		reg = <0>;
-		linux,default-trigger = "none";
-	};
-	green@1 {
-		label = "green";
-		reg = <1>;
-		linux,default-trigger = "none";
-	};
-	blue@2 {
-		label = "blue";
-		reg = <2>;
-		linux,default-trigger = "none";
-	};
-	unused@3 {
-		label = "unused";
-		reg = <3>;
-		linux,default-trigger = "none";
-	};
-};

diff --git a/Bindings/mailbox/arm,mhuv3.yaml b/Bindings/mailbox/arm,mhuv3.yaml
new file mode 100644
index 0000000..449b55a
--- /dev/null
+++ b/Bindings/mailbox/arm,mhuv3.yaml

@@ -0,0 +1,224 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/arm,mhuv3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM MHUv3 Mailbox Controller
+
+maintainers:
+  - Sudeep Holla <sudeep.holla@arm.com>
+  - Cristian Marussi <cristian.marussi@arm.com>
+
+description: |
+  The Arm Message Handling Unit (MHU) Version 3 is a mailbox controller that
+  enables unidirectional communications with remote processors through various
+  possible transport protocols.
+  The controller can optionally support a varying number of extensions that, in
+  turn, enable different kinds of transport to be used for communication.
+  Number, type and characteristics of each supported extension can be discovered
+  dynamically at runtime.
+
+  Given the unidirectional nature of the controller, an MHUv3 mailbox controller
+  is composed of a MHU Sender (MHUS) containing a PostBox (PBX) block and a MHU
+  Receiver (MHUR) containing a MailBox (MBX) block, where
+
+   PBX is used to
+      - Configure the MHU
+      - Send Transfers to the Receiver
+      - Optionally receive acknowledgment of a Transfer from the Receiver
+
+   MBX is used to
+      - Configure the MHU
+      - Receive Transfers from the Sender
+      - Optionally acknowledge Transfers sent by the Sender
+
+  Both PBX and MBX need to be present and defined in the DT description if you
+  need to establish a bidirectional communication, since you will have to
+  acquire two distinct unidirectional channels, one for each block.
+
+  As a consequence both blocks needs to be represented separately and specified
+  as distinct DT nodes in order to properly describe their resources.
+
+  Note that, though, thanks to the runtime discoverability, there is no need to
+  identify the type of blocks with distinct compatibles.
+
+  Following are the MHUv3 possible extensions.
+
+  - Doorbell Extension (DBE): DBE defines a type of channel called a Doorbell
+    Channel (DBCH). DBCH enables a single bit Transfer to be sent from the
+    Sender to Receiver. The Transfer indicates that an event has occurred.
+    When DBE is implemented, the number of DBCHs that an implementation of the
+    MHU can support is between 1 and 128, numbered starting from 0 in ascending
+    order and discoverable at run-time.
+    Each DBCH contains 32 individual fields, referred to as flags, each of which
+    can be used independently. It is possible for the Sender to send multiple
+    Transfers at once using a single DBCH, so long as each Transfer uses
+    a different flag in the DBCH.
+    Optionally, data may be transmitted through an out-of-band shared memory
+    region, wherein the MHU Doorbell is used strictly as an interrupt generation
+    mechanism, but this is out of the scope of these bindings.
+
+  - FastChannel Extension (FCE): FCE defines a type of channel called a Fast
+    Channel (FCH). FCH is intended for lower overhead communication between
+    Sender and Receiver at the expense of determinism. An FCH allows the Sender
+    to update the channel value at any time, regardless of whether the previous
+    value has been seen by the Receiver. When the Receiver reads the channel's
+    content it gets the last value written to the channel.
+    FCH is considered lossy in nature, and means that the Sender has no way of
+    knowing if, or when, the Receiver will act on the Transfer.
+    FCHs are expected to behave as RAM which generates interrupts when writes
+    occur to the locations within the RAM.
+    When FCE is implemented, the number of FCHs that an implementation of the
+    MHU can support is between 1-1024, if the FastChannel word-size is 32-bits,
+    or between 1-512, when the FastChannel word-size is 64-bits.
+    FCHs are numbered from 0 in ascending order.
+    Note that the number of FCHs and the word-size are implementation defined,
+    not configurable but discoverable at run-time.
+    Optionally, data may be transmitted through an out-of-band shared memory
+    region, wherein the MHU FastChannel is used as an interrupt generation
+    mechanism which carries also a pointer to such out-of-band data, but this
+    is out of the scope of these bindings.
+
+  - FIFO Extension (FE): FE defines a Channel type called a FIFO Channel (FFCH).
+    FFCH allows a Sender to send
+       - Multiple Transfers to the Receiver without having to wait for the
+         previous Transfer to be acknowledged by the Receiver, as long as the
+         FIFO has room for the Transfer.
+       - Transfers which require the Receiver to provide acknowledgment.
+       - Transfers which have in-band payload.
+    In all cases, the data is guaranteed to be observed by the Receiver in the
+    same order which the Sender sent it.
+    When FE is implemented, the number of FFCHs that an implementation of the
+    MHU can support is between 1 and 64, numbered starting from 0 in ascending
+    order. The number of FFCHs, their depth (same for all implemented FFCHs) and
+    the access-granularity are implementation defined, not configurable but
+    discoverable at run-time.
+    Optionally, additional data may be transmitted through an out-of-band shared
+    memory region, wherein the MHU FIFO is used to transmit, in order, a small
+    part of the payload (like a header) and a reference to the shared memory
+    area holding the remaining, bigger, chunk of the payload, but this is out of
+    the scope of these bindings.
+
+properties:
+  compatible:
+    const: arm,mhuv3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 74
+
+  interrupt-names:
+    description: |
+      The MHUv3 controller generates a number of events some of which are used
+      to generate interrupts; as a consequence it can expose a varying number of
+      optional PBX/MBX interrupts, representing the events generated during the
+      operation of the various transport protocols associated with different
+      extensions. All interrupts of the MHU are level-sensitive.
+      Some of these optional interrupts are defined per-channel, where the
+      number of channels effectively available is implementation defined and
+      run-time discoverable.
+      In the following names are enumerated using patterns, with per-channel
+      interrupts implicitly capped at the maximum channels allowed by the
+      specification for each extension type.
+      For the sake of simplicity maxItems is anyway capped to a most plausible
+      number, assuming way less channels would be implemented than actually
+      possible.
+
+      The only mandatory interrupts on the MHU are:
+        - combined
+        - mbx-fch-xfer-<N> but only if mbx-fcgrp-xfer-<N> is not implemented.
+
+    minItems: 1
+    maxItems: 74
+    items:
+      oneOf:
+        - const: combined
+          description: PBX/MBX Combined interrupt
+        - const: combined-ffch
+          description: PBX/MBX FIFO Combined interrupt
+        - pattern: '^ffch-low-tide-[0-9]+$'
+          description: PBX/MBX FIFO Channel <N> Low Tide interrupt
+        - pattern: '^ffch-high-tide-[0-9]+$'
+          description: PBX/MBX FIFO Channel <N> High Tide interrupt
+        - pattern: '^ffch-flush-[0-9]+$'
+          description: PBX/MBX FIFO Channel <N> Flush interrupt
+        - pattern: '^mbx-dbch-xfer-[0-9]+$'
+          description: MBX Doorbell Channel <N> Transfer interrupt
+        - pattern: '^mbx-fch-xfer-[0-9]+$'
+          description: MBX FastChannel <N> Transfer interrupt
+        - pattern: '^mbx-fchgrp-xfer-[0-9]+$'
+          description: MBX FastChannel <N> Group Transfer interrupt
+        - pattern: '^mbx-ffch-xfer-[0-9]+$'
+          description: MBX FIFO Channel <N> Transfer interrupt
+        - pattern: '^pbx-dbch-xfer-ack-[0-9]+$'
+          description: PBX Doorbell Channel <N> Transfer Ack interrupt
+        - pattern: '^pbx-ffch-xfer-ack-[0-9]+$'
+          description: PBX FIFO Channel <N> Transfer Ack interrupt
+
+  '#mbox-cells':
+    description: |
+      The first argument in the consumers 'mboxes' property represents the
+      extension type, the second is for the channel number while the third
+      depends on extension type.
+
+      Extension types constants are defined in <dt-bindings/arm/mhuv3-dt.h>.
+
+      Extension type for DBE is DBE_EXT and the third parameter represents the
+      doorbell flag number to use.
+      Extension type for FCE is FCE_EXT, third parameter unused.
+      Extension type for FE is FE_EXT, third parameter unused.
+
+      mboxes = <&mhu DBE_EXT 0 5>; // DBE, Doorbell Channel Window 0, doorbell 5.
+      mboxes = <&mhu DBE_EXT 7>; // DBE, Doorbell Channel Window 1, doorbell 7.
+      mboxes = <&mhu FCE_EXT 0 0>; // FCE, FastChannel Window 0.
+      mboxes = <&mhu FCE_EXT 3 0>; // FCE, FastChannel Window 3.
+      mboxes = <&mhu FE_EXT 1 0>; // FE, FIFO Channel Window 1.
+      mboxes = <&mhu FE_EXT 7 0>; // FE, FIFO Channel Window 7.
+    const: 3
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mailbox@2aaa0000 {
+            compatible = "arm,mhuv3";
+            #mbox-cells = <3>;
+            reg = <0 0x2aaa0000 0 0x10000>;
+            clocks = <&clock 0>;
+            interrupt-names = "combined", "pbx-dbch-xfer-ack-1",
+                               "ffch-high-tide-0";
+            interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        mailbox@2ab00000 {
+            compatible = "arm,mhuv3";
+            #mbox-cells = <3>;
+            reg = <0 0x2aab0000 0 0x10000>;
+            clocks = <&clock 0>;
+            interrupt-names = "combined", "mbx-dbch-xfer-1", "ffch-low-tide-0";
+            interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };

diff --git a/Bindings/mailbox/qcom,apcs-kpss-global.yaml b/Bindings/mailbox/qcom,apcs-kpss-global.yaml
index 79eb523..982c741 100644
--- a/Bindings/mailbox/qcom,apcs-kpss-global.yaml
+++ b/Bindings/mailbox/qcom,apcs-kpss-global.yaml

@@ -30,6 +30,7 @@
           - const: syscon
       - items:
           - enum:
+              - qcom,msm8974-apcs-kpss-global
               - qcom,msm8976-apcs-kpss-global
           - const: qcom,msm8994-apcs-kpss-global
           - const: syscon

diff --git a/Bindings/mailbox/qcom-ipcc.yaml b/Bindings/mailbox/qcom-ipcc.yaml
index 8f00486..05e4e1d 100644
--- a/Bindings/mailbox/qcom-ipcc.yaml
+++ b/Bindings/mailbox/qcom-ipcc.yaml

@@ -28,6 +28,7 @@
           - qcom,sa8775p-ipcc
           - qcom,sc7280-ipcc
           - qcom,sc8280xp-ipcc
+          - qcom,sdx75-ipcc
           - qcom,sm6350-ipcc
           - qcom,sm6375-ipcc
           - qcom,sm8250-ipcc

diff --git a/Bindings/media/amphion,vpu.yaml b/Bindings/media/amphion,vpu.yaml
index c0d83d7..9801de3 100644
--- a/Bindings/media/amphion,vpu.yaml
+++ b/Bindings/media/amphion,vpu.yaml

@@ -44,7 +44,7 @@
     description:
       Each vpu encoder or decoder correspond a MU, which used for communication
       between driver and firmware. Implement via mailbox on driver.
-    $ref: ../mailbox/fsl,mu.yaml#
+    $ref: /schemas/mailbox/fsl,mu.yaml#
 
 
   "^vpu-core@[0-9a-f]+$":

diff --git a/Bindings/media/brcm,bcm2835-unicam.yaml b/Bindings/media/brcm,bcm2835-unicam.yaml
new file mode 100644
index 0000000..5fb5d60
--- /dev/null
+++ b/Bindings/media/brcm,bcm2835-unicam.yaml

@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/brcm,bcm2835-unicam.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM283x Camera Interface (Unicam)
+
+maintainers:
+  - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
+
+description: |-
+  The Unicam block on BCM283x SoCs is the receiver for either
+  CSI-2 or CCP2 data from image sensors or similar devices.
+
+  The main platform using this SoC is the Raspberry Pi family of boards.  On
+  the Pi the VideoCore firmware can also control this hardware block, and
+  driving it from two different processors will cause issues.  To avoid this,
+  the firmware checks the device tree configuration during boot. If it finds
+  device tree nodes whose name starts with 'csi' then it will stop the firmware
+  accessing the block, and it can then safely be used via the device tree
+  binding.
+
+properties:
+  compatible:
+    const: brcm,bcm2835-unicam
+
+  reg:
+    items:
+      - description: Unicam block.
+      - description: Clock Manager Image (CMI) block.
+
+  reg-names:
+    items:
+      - const: unicam
+      - const: cmi
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Clock to drive the LP state machine of Unicam.
+      - description: Clock for the VPU (core clock).
+
+  clock-names:
+    items:
+      - const: lp
+      - const: vpu
+
+  power-domains:
+    items:
+      - description: Unicam power domain
+
+  brcm,num-data-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 2, 4 ]
+    description: |
+      Number of CSI-2 data lanes supported by this Unicam instance. The number
+      of data lanes actively used is specified with the data-lanes endpoint
+      property.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        additionalProperties: false
+
+        properties:
+          bus-type:
+            enum: [ 3, 4 ]
+
+          clock-noncontinuous: true
+          data-lanes: true
+          remote-endpoint: true
+
+        required:
+          - bus-type
+          - data-lanes
+          - remote-endpoint
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - brcm,num-data-lanes
+  - port
+
+additionalProperties: False
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/media/video-interfaces.h>
+    #include <dt-bindings/power/raspberrypi-power.h>
+
+    csi1: csi@7e801000 {
+        compatible = "brcm,bcm2835-unicam";
+        reg = <0x7e801000 0x800>,
+              <0x7e802004 0x4>;
+        reg-names = "unicam", "cmi";
+        interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clocks BCM2835_CLOCK_CAM1>,
+                 <&firmware_clocks 4>;
+        clock-names = "lp", "vpu";
+        power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>;
+        brcm,num-data-lanes = <2>;
+        port {
+                csi1_ep: endpoint {
+                        remote-endpoint = <&imx219_0>;
+                        bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+                        data-lanes = <1 2>;
+                };
+        };
+    };
+...

diff --git a/Bindings/media/cec/st,stm32-cec.yaml b/Bindings/media/cec/st,stm32-cec.yaml
index 2314a9a..1d930d9 100644
--- a/Bindings/media/cec/st,stm32-cec.yaml
+++ b/Bindings/media/cec/st,stm32-cec.yaml

@@ -29,6 +29,10 @@
       - const: cec
       - const: hdmi-cec
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

diff --git a/Bindings/media/i2c/galaxycore,gc0308.yaml b/Bindings/media/i2c/galaxycore,gc0308.yaml
index f81e7da..2bf1a81 100644
--- a/Bindings/media/i2c/galaxycore,gc0308.yaml
+++ b/Bindings/media/i2c/galaxycore,gc0308.yaml

@@ -15,7 +15,7 @@
   They include an ISP capable of auto exposure and auto white balance.
 
 allOf:
-  - $ref: ../video-interface-devices.yaml#
+  - $ref: /schemas/media/video-interface-devices.yaml#
 
 properties:
   compatible:

diff --git a/Bindings/media/i2c/galaxycore,gc2145.yaml b/Bindings/media/i2c/galaxycore,gc2145.yaml
index 1726ecc..9eac588 100644
--- a/Bindings/media/i2c/galaxycore,gc2145.yaml
+++ b/Bindings/media/i2c/galaxycore,gc2145.yaml

@@ -19,7 +19,7 @@
   either through a parallel interface or through MIPI CSI-2.
 
 allOf:
-  - $ref: ../video-interface-devices.yaml#
+  - $ref: /schemas/media/video-interface-devices.yaml#
 
 properties:
   compatible:

diff --git a/Bindings/media/i2c/ovti,ov2680.yaml b/Bindings/media/i2c/ovti,ov2680.yaml
index cf456f8..634d3b8 100644
--- a/Bindings/media/i2c/ovti,ov2680.yaml
+++ b/Bindings/media/i2c/ovti,ov2680.yaml

@@ -37,31 +37,45 @@
       active low.
     maxItems: 1
 
-  dovdd-supply:
+  DOVDD-supply:
     description:
       Definition of the regulator used as interface power supply.
 
-  avdd-supply:
+  AVDD-supply:
     description:
       Definition of the regulator used as analog power supply.
 
-  dvdd-supply:
+  DVDD-supply:
     description:
       Definition of the regulator used as digital power supply.
 
   port:
-    $ref: /schemas/graph.yaml#/properties/port
     description:
       A node containing an output port node.
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        additionalProperties: false
+
+        properties:
+          link-frequencies: true
+
+          remote-endpoint: true
+
+        required:
+          - link-frequencies
 
 required:
   - compatible
   - reg
   - clocks
   - clock-names
-  - dovdd-supply
-  - avdd-supply
-  - dvdd-supply
+  - DOVDD-supply
+  - AVDD-supply
+  - DVDD-supply
   - reset-gpios
   - port
 
@@ -82,13 +96,14 @@
                 clock-names = "xvclk";
                 reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 
-                dovdd-supply = <&sw2_reg>;
-                dvdd-supply = <&sw2_reg>;
-                avdd-supply = <&reg_peri_3p15v>;
+                DOVDD-supply = <&sw2_reg>;
+                DVDD-supply = <&sw2_reg>;
+                AVDD-supply = <&reg_peri_3p15v>;
 
                 port {
                         ov2680_to_mipi: endpoint {
                                 remote-endpoint = <&mipi_from_sensor>;
+                                link-frequencies = /bits/ 64 <330000000>;
                         };
                 };
         };

diff --git a/Bindings/media/i2c/ov8856.yaml b/Bindings/media/i2c/ovti,ov8856.yaml
similarity index 97%
rename from Bindings/media/i2c/ov8856.yaml
rename to Bindings/media/i2c/ovti,ov8856.yaml
index 816dac9..3f6f72c 100644
--- a/Bindings/media/i2c/ov8856.yaml
+++ b/Bindings/media/i2c/ovti,ov8856.yaml

@@ -2,7 +2,7 @@
 # Copyright (c) 2019 MediaTek Inc.
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/media/i2c/ov8856.yaml#
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov8856.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Omnivision OV8856 CMOS Sensor

diff --git a/Bindings/media/i2c/sony,imx214.yaml b/Bindings/media/i2c/sony,imx214.yaml
index 60903da..0162eec 100644
--- a/Bindings/media/i2c/sony,imx214.yaml
+++ b/Bindings/media/i2c/sony,imx214.yaml

@@ -16,7 +16,7 @@
   maximum throughput of 1.2Gbps/lane.
 
 allOf:
-  - $ref: ../video-interface-devices.yaml#
+  - $ref: /schemas/media/video-interface-devices.yaml#
 
 properties:
   compatible:

diff --git a/Bindings/media/i2c/sony,imx290.yaml b/Bindings/media/i2c/sony,imx290.yaml
index a531bad..bf05ca4 100644
--- a/Bindings/media/i2c/sony,imx290.yaml
+++ b/Bindings/media/i2c/sony,imx290.yaml

@@ -23,6 +23,9 @@
   is treated the same as this as it was the original compatible string.
   imx290llr is the mono version of the sensor.
 
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -101,7 +104,7 @@
   - vdddo-supply
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Bindings/media/i2c/sony,imx415.yaml b/Bindings/media/i2c/sony,imx415.yaml
index 9a00dab..34962c5 100644
--- a/Bindings/media/i2c/sony,imx415.yaml
+++ b/Bindings/media/i2c/sony,imx415.yaml

@@ -18,7 +18,7 @@
   available via CSI-2 serial data output (two or four lanes).
 
 allOf:
-  - $ref: ../video-interface-devices.yaml#
+  - $ref: /schemas/media/video-interface-devices.yaml#
 
 properties:
   compatible:

diff --git a/Bindings/media/nxp,imx8-isi.yaml b/Bindings/media/nxp,imx8-isi.yaml
index e466546..4d5348d4 100644
--- a/Bindings/media/nxp,imx8-isi.yaml
+++ b/Bindings/media/nxp,imx8-isi.yaml

@@ -84,6 +84,7 @@
           properties:
             port@0:
               description: MIPI CSI-2 RX
+            port@1: false
           required:
             - port@0
 

diff --git a/Bindings/media/nxp,imx8-jpeg.yaml b/Bindings/media/nxp,imx8-jpeg.yaml
index 3d9d1db..2be30c5 100644
--- a/Bindings/media/nxp,imx8-jpeg.yaml
+++ b/Bindings/media/nxp,imx8-jpeg.yaml

@@ -31,6 +31,11 @@
   reg:
     maxItems: 1
 
+  clocks:
+    items:
+      - description: AXI DMA engine clock for fetching JPEG bitstream from memory (per)
+      - description: IP bus clock for register access (ipg)
+
   interrupts:
     description: |
       There are 4 slots available in the IP, which the driver may use
@@ -49,6 +54,7 @@
 required:
   - compatible
   - reg
+  - clocks
   - interrupts
   - power-domains
 
@@ -56,12 +62,15 @@
 
 examples:
   - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/firmware/imx/rsrc.h>
 
     jpegdec: jpegdec@58400000 {
         compatible = "nxp,imx8qxp-jpgdec";
         reg = <0x58400000 0x00050000 >;
+        clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
+                 <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
         interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
@@ -76,6 +85,8 @@
     jpegenc: jpegenc@58450000 {
         compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc";
         reg = <0x58450000 0x00050000 >;
+        clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
+                 <&img_jpeg__lpcg IMX_LPCG_CLK_4>;
         interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,

diff --git a/Bindings/media/qcom,sc8280xp-camss.yaml b/Bindings/media/qcom,sc8280xp-camss.yaml
new file mode 100644
index 0000000..c0bc317
--- /dev/null
+++ b/Bindings/media/qcom,sc8280xp-camss.yaml

@@ -0,0 +1,512 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sc8280xp-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP Camera Subsystem (CAMSS)
+
+maintainers:
+  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,sc8280xp-camss
+
+  clocks:
+    maxItems: 40
+
+  clock-names:
+    items:
+      - const: camnoc_axi
+      - const: cpas_ahb
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy3
+      - const: csiphy3_timer
+      - const: vfe0_axi
+      - const: vfe0
+      - const: vfe0_cphy_rx
+      - const: vfe0_csid
+      - const: vfe1_axi
+      - const: vfe1
+      - const: vfe1_cphy_rx
+      - const: vfe1_csid
+      - const: vfe2_axi
+      - const: vfe2
+      - const: vfe2_cphy_rx
+      - const: vfe2_csid
+      - const: vfe3_axi
+      - const: vfe3
+      - const: vfe3_cphy_rx
+      - const: vfe3_csid
+      - const: vfe_lite0
+      - const: vfe_lite0_cphy_rx
+      - const: vfe_lite0_csid
+      - const: vfe_lite1
+      - const: vfe_lite1_cphy_rx
+      - const: vfe_lite1_csid
+      - const: vfe_lite2
+      - const: vfe_lite2_cphy_rx
+      - const: vfe_lite2_csid
+      - const: vfe_lite3
+      - const: vfe_lite3_cphy_rx
+      - const: vfe_lite3_csid
+      - const: gcc_axi_hf
+      - const: gcc_axi_sf
+
+  interrupts:
+    maxItems: 20
+
+  interrupt-names:
+    items:
+      - const: csid1_lite
+      - const: vfe_lite1
+      - const: csiphy3
+      - const: csid0
+      - const: vfe0
+      - const: csid1
+      - const: vfe1
+      - const: csid0_lite
+      - const: vfe_lite0
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csid2
+      - const: vfe2
+      - const: csid3_lite
+      - const: csid2_lite
+      - const: vfe_lite3
+      - const: vfe_lite2
+      - const: csid3
+      - const: vfe3
+
+  iommus:
+    maxItems: 16
+
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    items:
+      - const: cam_ahb
+      - const: cam_hf_mnoc
+      - const: cam_sf_mnoc
+      - const: cam_sf_icp_mnoc
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE2 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE3 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  power-domain-names:
+    items:
+      - const: ife0
+      - const: ife1
+      - const: ife2
+      - const: ife3
+      - const: top
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data from CSIPHY0.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data from CSIPHY1.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data from CSIPHY2.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data from CSIPHY3.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+  reg:
+    maxItems: 20
+
+  reg-names:
+    items:
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy0
+      - const: csiphy1
+      - const: vfe0
+      - const: csid0
+      - const: vfe1
+      - const: csid1
+      - const: vfe2
+      - const: csid2
+      - const: vfe_lite0
+      - const: csid0_lite
+      - const: vfe_lite1
+      - const: csid1_lite
+      - const: vfe_lite2
+      - const: csid2_lite
+      - const: vfe_lite3
+      - const: csid3_lite
+      - const: vfe3
+      - const: csid3
+
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interconnects
+  - interconnect-names
+  - interrupts
+  - interrupt-names
+  - iommus
+  - power-domains
+  - power-domain-names
+  - reg
+  - reg-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,sc8280xp-camcc.h>
+    #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        camss: camss@ac5a000 {
+            compatible = "qcom,sc8280xp-camss";
+
+            reg = <0 0x0ac5a000 0 0x2000>,
+                  <0 0x0ac5c000 0 0x2000>,
+                  <0 0x0ac65000 0 0x2000>,
+                  <0 0x0ac67000 0 0x2000>,
+                  <0 0x0acaf000 0 0x4000>,
+                  <0 0x0acb3000 0 0x1000>,
+                  <0 0x0acb6000 0 0x4000>,
+                  <0 0x0acba000 0 0x1000>,
+                  <0 0x0acbd000 0 0x4000>,
+                  <0 0x0acc1000 0 0x1000>,
+                  <0 0x0acc4000 0 0x4000>,
+                  <0 0x0acc8000 0 0x1000>,
+                  <0 0x0accb000 0 0x4000>,
+                  <0 0x0accf000 0 0x1000>,
+                  <0 0x0acd2000 0 0x4000>,
+                  <0 0x0acd6000 0 0x1000>,
+                  <0 0x0acd9000 0 0x4000>,
+                  <0 0x0acdd000 0 0x1000>,
+                  <0 0x0ace0000 0 0x4000>,
+                  <0 0x0ace4000 0 0x1000>;
+
+            reg-names = "csiphy2",
+                        "csiphy3",
+                        "csiphy0",
+                        "csiphy1",
+                        "vfe0",
+                        "csid0",
+                        "vfe1",
+                        "csid1",
+                        "vfe2",
+                        "csid2",
+                        "vfe_lite0",
+                        "csid0_lite",
+                        "vfe_lite1",
+                        "csid1_lite",
+                        "vfe_lite2",
+                        "csid2_lite",
+                        "vfe_lite3",
+                        "csid3_lite",
+                        "vfe3",
+                        "csid3";
+
+            vdda-phy-supply = <&vreg_l6d>;
+            vdda-pll-supply = <&vreg_l4d>;
+
+            interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+
+            interrupt-names = "csid1_lite",
+                              "vfe_lite1",
+                              "csiphy3",
+                              "csid0",
+                              "vfe0",
+                              "csid1",
+                              "vfe1",
+                              "csid0_lite",
+                              "vfe_lite0",
+                              "csiphy0",
+                              "csiphy1",
+                              "csiphy2",
+                              "csid2",
+                              "vfe2",
+                              "csid3_lite",
+                              "csid2_lite",
+                              "vfe_lite3",
+                              "vfe_lite2",
+                              "csid3",
+                              "vfe3";
+
+            power-domains = <&camcc IFE_0_GDSC>,
+                            <&camcc IFE_1_GDSC>,
+                            <&camcc IFE_2_GDSC>,
+                            <&camcc IFE_3_GDSC>,
+                            <&camcc TITAN_TOP_GDSC>;
+
+            power-domain-names = "ife0",
+                                 "ife1",
+                                 "ife2",
+                                 "ife3",
+                                 "top";
+
+            clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+                     <&camcc CAMCC_CPAS_AHB_CLK>,
+                     <&camcc CAMCC_CSIPHY0_CLK>,
+                     <&camcc CAMCC_CSI0PHYTIMER_CLK>,
+                     <&camcc CAMCC_CSIPHY1_CLK>,
+                     <&camcc CAMCC_CSI1PHYTIMER_CLK>,
+                     <&camcc CAMCC_CSIPHY2_CLK>,
+                     <&camcc CAMCC_CSI2PHYTIMER_CLK>,
+                     <&camcc CAMCC_CSIPHY3_CLK>,
+                     <&camcc CAMCC_CSI3PHYTIMER_CLK>,
+                     <&camcc CAMCC_IFE_0_AXI_CLK>,
+                     <&camcc CAMCC_IFE_0_CLK>,
+                     <&camcc CAMCC_IFE_0_CPHY_RX_CLK>,
+                     <&camcc CAMCC_IFE_0_CSID_CLK>,
+                     <&camcc CAMCC_IFE_1_AXI_CLK>,
+                     <&camcc CAMCC_IFE_1_CLK>,
+                     <&camcc CAMCC_IFE_1_CPHY_RX_CLK>,
+                     <&camcc CAMCC_IFE_1_CSID_CLK>,
+                     <&camcc CAMCC_IFE_2_AXI_CLK>,
+                     <&camcc CAMCC_IFE_2_CLK>,
+                     <&camcc CAMCC_IFE_2_CPHY_RX_CLK>,
+                     <&camcc CAMCC_IFE_2_CSID_CLK>,
+                     <&camcc CAMCC_IFE_3_AXI_CLK>,
+                     <&camcc CAMCC_IFE_3_CLK>,
+                     <&camcc CAMCC_IFE_3_CPHY_RX_CLK>,
+                     <&camcc CAMCC_IFE_3_CSID_CLK>,
+                     <&camcc CAMCC_IFE_LITE_0_CLK>,
+                     <&camcc CAMCC_IFE_LITE_0_CPHY_RX_CLK>,
+                     <&camcc CAMCC_IFE_LITE_0_CSID_CLK>,
+                     <&camcc CAMCC_IFE_LITE_1_CLK>,
+                     <&camcc CAMCC_IFE_LITE_1_CPHY_RX_CLK>,
+                     <&camcc CAMCC_IFE_LITE_1_CSID_CLK>,
+                     <&camcc CAMCC_IFE_LITE_2_CLK>,
+                     <&camcc CAMCC_IFE_LITE_2_CPHY_RX_CLK>,
+                     <&camcc CAMCC_IFE_LITE_2_CSID_CLK>,
+                     <&camcc CAMCC_IFE_LITE_3_CLK>,
+                     <&camcc CAMCC_IFE_LITE_3_CPHY_RX_CLK>,
+                     <&camcc CAMCC_IFE_LITE_3_CSID_CLK>,
+                     <&gcc GCC_CAMERA_HF_AXI_CLK>,
+                     <&gcc GCC_CAMERA_SF_AXI_CLK>;
+
+            clock-names = "camnoc_axi",
+                          "cpas_ahb",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "csiphy2",
+                          "csiphy2_timer",
+                          "csiphy3",
+                          "csiphy3_timer",
+                          "vfe0_axi",
+                          "vfe0",
+                          "vfe0_cphy_rx",
+                          "vfe0_csid",
+                          "vfe1_axi",
+                          "vfe1",
+                          "vfe1_cphy_rx",
+                          "vfe1_csid",
+                          "vfe2_axi",
+                          "vfe2",
+                          "vfe2_cphy_rx",
+                          "vfe2_csid",
+                          "vfe3_axi",
+                          "vfe3",
+                          "vfe3_cphy_rx",
+                          "vfe3_csid",
+                          "vfe_lite0",
+                          "vfe_lite0_cphy_rx",
+                          "vfe_lite0_csid",
+                          "vfe_lite1",
+                          "vfe_lite1_cphy_rx",
+                          "vfe_lite1_csid",
+                          "vfe_lite2",
+                          "vfe_lite2_cphy_rx",
+                          "vfe_lite2_csid",
+                          "vfe_lite3",
+                          "vfe_lite3_cphy_rx",
+                          "vfe_lite3_csid",
+                          "gcc_axi_hf",
+                          "gcc_axi_sf";
+
+
+            iommus = <&apps_smmu 0x2000 0x4e0>,
+                     <&apps_smmu 0x2020 0x4e0>,
+                     <&apps_smmu 0x2040 0x4e0>,
+                     <&apps_smmu 0x2060 0x4e0>,
+                     <&apps_smmu 0x2080 0x4e0>,
+                     <&apps_smmu 0x20e0 0x4e0>,
+                     <&apps_smmu 0x20c0 0x4e0>,
+                     <&apps_smmu 0x20a0 0x4e0>,
+                     <&apps_smmu 0x2400 0x4e0>,
+                     <&apps_smmu 0x2420 0x4e0>,
+                     <&apps_smmu 0x2440 0x4e0>,
+                     <&apps_smmu 0x2460 0x4e0>,
+                     <&apps_smmu 0x2480 0x4e0>,
+                     <&apps_smmu 0x24e0 0x4e0>,
+                     <&apps_smmu 0x24c0 0x4e0>,
+                     <&apps_smmu 0x24a0 0x4e0>;
+
+            interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_CAMERA_CFG 0>,
+                            <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI1 0>,
+                            <&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI1 0>,
+                            <&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI1 0>;
+            interconnect-names = "cam_ahb",
+                                 "cam_hf_mnoc",
+                                 "cam_sf_mnoc",
+                                 "cam_sf_icp_mnoc";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    csiphy_ep0: endpoint@0 {
+                        reg = <0>;
+                        clock-lanes = <7>;
+                        data-lanes = <0 1>;
+                        remote-endpoint = <&sensor_ep>;
+                    };
+                };
+            };
+        };
+    };

diff --git a/Bindings/media/st,stm32-dcmi.yaml b/Bindings/media/st,stm32-dcmi.yaml
index 6b3e413..34147127 100644
--- a/Bindings/media/st,stm32-dcmi.yaml
+++ b/Bindings/media/st,stm32-dcmi.yaml

@@ -36,6 +36,10 @@
   resets:
     maxItems: 1
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
   port:
     $ref: /schemas/graph.yaml#/$defs/port-base
     unevaluatedProperties: false

diff --git a/Bindings/media/st,stm32mp25-video-codec.yaml b/Bindings/media/st,stm32mp25-video-codec.yaml
index b8611bc..73726c6 100644
--- a/Bindings/media/st,stm32mp25-video-codec.yaml
+++ b/Bindings/media/st,stm32mp25-video-codec.yaml

@@ -30,6 +30,10 @@
   clocks:
     maxItems: 1
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

diff --git a/Bindings/memory-controllers/samsung,s5pv210-dmc.yaml b/Bindings/memory-controllers/samsung,s5pv210-dmc.yaml
new file mode 100644
index 0000000..c0e4705
--- /dev/null
+++ b/Bindings/memory-controllers/samsung,s5pv210-dmc.yaml

@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/samsung,s5pv210-dmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5Pv210 SoC Dynamic Memory Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  Dynamic Memory Controller interfaces external JEDEC DDR-type SDRAM.
+
+properties:
+  compatible:
+    const: samsung,s5pv210-dmc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@f0000000 {
+        compatible = "samsung,s5pv210-dmc";
+        reg = <0xf0000000 0x1000>;
+    };

diff --git a/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
index 84ac6f5..706e45e 100644
--- a/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
+++ b/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml

@@ -50,6 +50,10 @@
       Reflects the memory layout with four integer values per bank. Format:
       <bank-number> 0 <address of the bank> <size>
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 patternProperties:
   "^.*@[0-4],[a-f0-9]+$":
     additionalProperties: true

diff --git a/Bindings/mfd/actions,atc260x.yaml b/Bindings/mfd/actions,atc260x.yaml
index 6811246..9ae4197 100644
--- a/Bindings/mfd/actions,atc260x.yaml
+++ b/Bindings/mfd/actions,atc260x.yaml

@@ -21,7 +21,7 @@
   regulators.
 
 allOf:
-  - $ref: ../input/input.yaml
+  - $ref: /schemas/input/input.yaml
 
 properties:
   compatible:
@@ -57,7 +57,7 @@
 
       switchldo1:
         type: object
-        $ref: ../regulator/regulator.yaml
+        $ref: /schemas/regulator/regulator.yaml
 
         properties:
           regulator-name: true
@@ -76,7 +76,7 @@
 
       "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2])$":
         type: object
-        $ref: ../regulator/regulator.yaml
+        $ref: /schemas/regulator/regulator.yaml
 
         properties:
           regulator-name: true

diff --git a/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml b/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml
index 8789e36..ca0e9f1 100644
--- a/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml
+++ b/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml

@@ -20,7 +20,7 @@
     maxItems: 1
 
 patternProperties:
-  "^.*_(clk|rst)$":
+  "^.*-(clk|rst)$":
     type: object
     unevaluatedProperties: false
 
@@ -171,7 +171,7 @@
         compatible = "allwinner,sun6i-a31-prcm";
         reg = <0x01f01400 0x200>;
 
-        ar100: ar100_clk {
+        ar100: ar100-clk {
             compatible = "allwinner,sun6i-a31-ar100-clk";
             #clock-cells = <0>;
             clocks = <&rtc 0>, <&osc24M>,
@@ -180,7 +180,7 @@
             clock-output-names = "ar100";
         };
 
-        ahb0: ahb0_clk {
+        ahb0: ahb0-clk {
             compatible = "fixed-factor-clock";
             #clock-cells = <0>;
             clock-div = <1>;
@@ -189,14 +189,14 @@
             clock-output-names = "ahb0";
         };
 
-        apb0: apb0_clk {
+        apb0: apb0-clk {
             compatible = "allwinner,sun6i-a31-apb0-clk";
             #clock-cells = <0>;
             clocks = <&ahb0>;
             clock-output-names = "apb0";
         };
 
-        apb0_gates: apb0_gates_clk {
+        apb0_gates: apb0-gates-clk {
             compatible = "allwinner,sun6i-a31-apb0-gates-clk";
             #clock-cells = <1>;
             clocks = <&apb0>;
@@ -206,14 +206,14 @@
                                  "apb0_i2c";
         };
 
-        ir_clk: ir_clk {
+        ir_clk: ir-clk {
             #clock-cells = <0>;
             compatible = "allwinner,sun4i-a10-mod0-clk";
             clocks = <&rtc 0>, <&osc24M>;
             clock-output-names = "ir";
         };
 
-        apb0_rst: apb0_rst {
+        apb0_rst: apb0-rst {
             compatible = "allwinner,sun6i-a31-clock-reset";
             #reset-cells = <1>;
         };

diff --git a/Bindings/mfd/aspeed,ast2x00-scu.yaml b/Bindings/mfd/aspeed,ast2x00-scu.yaml
index 1689b98..86ee69c 100644
--- a/Bindings/mfd/aspeed,ast2x00-scu.yaml
+++ b/Bindings/mfd/aspeed,ast2x00-scu.yaml

@@ -47,10 +47,18 @@
     type: object
 
   '^pinctrl(@[0-9a-f]+)?$':
-    oneOf:
-      - $ref: /schemas/pinctrl/aspeed,ast2400-pinctrl.yaml
-      - $ref: /schemas/pinctrl/aspeed,ast2500-pinctrl.yaml
-      - $ref: /schemas/pinctrl/aspeed,ast2600-pinctrl.yaml
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          enum:
+            - aspeed,ast2400-pinctrl
+            - aspeed,ast2500-pinctrl
+            - aspeed,ast2600-pinctrl
+
+    required:
+      - compatible
 
   '^interrupt-controller@[0-9a-f]+$':
     description: See Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt

diff --git a/Bindings/mfd/brcm,cru.yaml b/Bindings/mfd/brcm,cru.yaml
index b85819f..04910e4 100644
--- a/Bindings/mfd/brcm,cru.yaml
+++ b/Bindings/mfd/brcm,cru.yaml

@@ -34,19 +34,19 @@
 
 patternProperties:
   '^clock-controller@[a-f0-9]+$':
-    $ref: ../clock/brcm,iproc-clocks.yaml
+    $ref: /schemas/clock/brcm,iproc-clocks.yaml
 
   '^phy@[a-f0-9]+$':
-    $ref: ../phy/bcm-ns-usb2-phy.yaml
+    $ref: /schemas/phy/bcm-ns-usb2-phy.yaml
 
   '^pinctrl@[a-f0-9]+$':
-    $ref: ../pinctrl/brcm,ns-pinmux.yaml
+    $ref: /schemas/pinctrl/brcm,ns-pinmux.yaml
 
   '^syscon@[a-f0-9]+$':
     $ref: syscon.yaml
 
   '^thermal@[a-f0-9]+$':
-    $ref: ../thermal/brcm,ns-thermal.yaml
+    $ref: /schemas/thermal/brcm,ns-thermal.yaml
 
 additionalProperties: false
 

diff --git a/Bindings/mfd/brcm,iproc-cdru.txt b/Bindings/mfd/brcm,iproc-cdru.txt
deleted file mode 100644
index 82f82e0..0000000
--- a/Bindings/mfd/brcm,iproc-cdru.txt
+++ /dev/null

@@ -1,16 +0,0 @@
-Broadcom iProc Chip Device Resource Unit (CDRU)
-
-Various Broadcom iProc SoCs have a set of registers that provide various
-chip specific device and resource configurations. This node allows access to
-these CDRU registers via syscon.
-
-Required properties:
-- compatible: should contain:
-		"brcm,sr-cdru", "syscon" for Stingray
-- reg: base address and range of the CDRU registers
-
-Example:
-	cdru: syscon@6641d000 {
-		compatible = "brcm,sr-cdru", "syscon";
-		reg = <0 0x6641d000 0 0x400>;
-	};

diff --git a/Bindings/mfd/brcm,iproc-mhb.txt b/Bindings/mfd/brcm,iproc-mhb.txt
deleted file mode 100644
index 4421e97..0000000
--- a/Bindings/mfd/brcm,iproc-mhb.txt
+++ /dev/null

@@ -1,18 +0,0 @@
-Broadcom iProc Multi Host Bridge (MHB)
-
-Certain Broadcom iProc SoCs have a multi host bridge (MHB) block that controls
-the connection and configuration of 1) internal PCIe serdes; 2) PCIe endpoint
-interface; 3) access to the Nitro (network processing) engine
-
-This node allows access to these MHB registers via syscon.
-
-Required properties:
-- compatible: should contain:
-		"brcm,sr-mhb", "syscon" for Stingray
-- reg: base address and range of the MHB registers
-
-Example:
-	mhb: syscon@60401000 {
-		compatible = "brcm,sr-mhb", "syscon";
-		reg = <0 0x60401000 0 0x38c>;
-	};

diff --git a/Bindings/mfd/brcm,misc.yaml b/Bindings/mfd/brcm,misc.yaml
index cff7d77..abe2452 100644
--- a/Bindings/mfd/brcm,misc.yaml
+++ b/Bindings/mfd/brcm,misc.yaml

@@ -33,7 +33,7 @@
 
 patternProperties:
   '^reset-controller@[a-f0-9]+$':
-    $ref: ../reset/brcm,bcm4908-misc-pcie-reset.yaml
+    $ref: /schemas/reset/brcm,bcm4908-misc-pcie-reset.yaml
 
 additionalProperties: false
 

diff --git a/Bindings/mfd/canaan,k210-sysctl.yaml b/Bindings/mfd/canaan,k210-sysctl.yaml
index 3b3beab..2451d0f 100644
--- a/Bindings/mfd/canaan,k210-sysctl.yaml
+++ b/Bindings/mfd/canaan,k210-sysctl.yaml

@@ -36,7 +36,7 @@
   clock-controller:
     # Child node
     type: object
-    $ref: ../clock/canaan,k210-clk.yaml
+    $ref: /schemas/clock/canaan,k210-clk.yaml
     description:
       Clock controller for the SoC clocks. This child node definition
       should follow the bindings specified in
@@ -45,7 +45,7 @@
   reset-controller:
     # Child node
     type: object
-    $ref: ../reset/canaan,k210-rst.yaml
+    $ref: /schemas/reset/canaan,k210-rst.yaml
     description:
       Reset controller for the SoC. This child node definition
       should follow the bindings specified in
@@ -54,7 +54,7 @@
   syscon-reboot:
     # Child node
     type: object
-    $ref: ../power/reset/syscon-reboot.yaml
+    $ref: /schemas/power/reset/syscon-reboot.yaml
     description:
       Reboot method for the SoC. This child node definition
       should follow the bindings specified in

diff --git a/Bindings/mfd/delta,tn48m-cpld.yaml b/Bindings/mfd/delta,tn48m-cpld.yaml
index f6967c1..d3b7914 100644
--- a/Bindings/mfd/delta,tn48m-cpld.yaml
+++ b/Bindings/mfd/delta,tn48m-cpld.yaml

@@ -42,10 +42,10 @@
 
 patternProperties:
   "^gpio(@[0-9a-f]+)?$":
-    $ref: ../gpio/delta,tn48m-gpio.yaml
+    $ref: /schemas/gpio/delta,tn48m-gpio.yaml
 
   "^reset-controller?$":
-    $ref: ../reset/delta,tn48m-reset.yaml
+    $ref: /schemas/reset/delta,tn48m-reset.yaml
 
 additionalProperties: false
 

diff --git a/Bindings/mfd/iqs62x.yaml b/Bindings/mfd/iqs62x.yaml
index f438c23..e79ce44 100644
--- a/Bindings/mfd/iqs62x.yaml
+++ b/Bindings/mfd/iqs62x.yaml

@@ -38,10 +38,10 @@
       device name with ".bin" as the extension (e.g. iqs620a.bin for IQS620A).
 
   keys:
-    $ref: ../input/iqs62x-keys.yaml
+    $ref: /schemas/input/iqs62x-keys.yaml
 
   pwm:
-    $ref: ../pwm/iqs620a-pwm.yaml
+    $ref: /schemas/pwm/iqs620a-pwm.yaml
 
 required:
   - compatible

diff --git a/Bindings/mfd/kontron,sl28cpld.yaml b/Bindings/mfd/kontron,sl28cpld.yaml
index eb3b435..37207a9 100644
--- a/Bindings/mfd/kontron,sl28cpld.yaml
+++ b/Bindings/mfd/kontron,sl28cpld.yaml

@@ -39,19 +39,19 @@
 
 patternProperties:
   "^gpio(@[0-9a-f]+)?$":
-    $ref: ../gpio/kontron,sl28cpld-gpio.yaml
+    $ref: /schemas/gpio/kontron,sl28cpld-gpio.yaml
 
   "^hwmon(@[0-9a-f]+)?$":
-    $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml
+    $ref: /schemas/hwmon/kontron,sl28cpld-hwmon.yaml
 
   "^interrupt-controller(@[0-9a-f]+)?$":
-    $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml
+    $ref: /schemas/interrupt-controller/kontron,sl28cpld-intc.yaml
 
   "^pwm(@[0-9a-f]+)?$":
-    $ref: ../pwm/kontron,sl28cpld-pwm.yaml
+    $ref: /schemas/pwm/kontron,sl28cpld-pwm.yaml
 
   "^watchdog(@[0-9a-f]+)?$":
-    $ref: ../watchdog/kontron,sl28cpld-wdt.yaml
+    $ref: /schemas/watchdog/kontron,sl28cpld-wdt.yaml
 
 required:
   - "#address-cells"

diff --git a/Bindings/mfd/lp873x.txt b/Bindings/mfd/lp873x.txt
deleted file mode 100644
index ae9cf39..0000000
--- a/Bindings/mfd/lp873x.txt
+++ /dev/null

@@ -1,67 +0,0 @@
-TI LP873X PMIC MFD driver
-
-Required properties:
-  - compatible:	"ti,lp8732", "ti,lp8733"
-  - reg:		I2C slave address.
-  - gpio-controller:	Marks the device node as a GPIO Controller.
-  - #gpio-cells:	Should be two.  The first cell is the pin number and
-			the second cell is used to specify flags.
-			See ../gpio/gpio.txt for more information.
-  - xxx-in-supply:	Phandle to parent supply node of each regulator
-			populated under regulators node. xxx can be
-			buck0, buck1, ldo0 or ldo1.
-  - regulators:	List of child nodes that specify the regulator
-			initialization data.
-Example:
-
-pmic: lp8733@60 {
-	compatible = "ti,lp8733";
-	reg = <0x60>;
-	gpio-controller;
-	#gpio-cells = <2>;
-
-	buck0-in-supply = <&vsys_3v3>;
-	buck1-in-supply = <&vsys_3v3>;
-	ldo0-in-supply = <&vsys_3v3>;
-	ldo1-in-supply = <&vsys_3v3>;
-
-	regulators {
-		lp8733_buck0: buck0 {
-			regulator-name = "lp8733-buck0";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1400000>;
-			regulator-min-microamp = <1500000>;
-			regulator-max-microamp = <4000000>;
-			regulator-ramp-delay = <10000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		lp8733_buck1: buck1 {
-			regulator-name = "lp8733-buck1";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1400000>;
-			regulator-min-microamp = <1500000>;
-			regulator-max-microamp = <4000000>;
-			regulator-ramp-delay = <10000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		lp8733_ldo0: ldo0 {
-			regulator-name = "lp8733-ldo0";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		lp8733_ldo1: ldo1 {
-			regulator-name = "lp8733-ldo1";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
-};

diff --git a/Bindings/mfd/max77650.yaml b/Bindings/mfd/max77650.yaml
index 4181174..d93d841 100644
--- a/Bindings/mfd/max77650.yaml
+++ b/Bindings/mfd/max77650.yaml

@@ -53,16 +53,16 @@
       Single string containing the name of the GPIO line.
 
   regulators:
-    $ref: ../regulator/max77650-regulator.yaml
+    $ref: /schemas/regulator/max77650-regulator.yaml
 
   charger:
-    $ref: ../power/supply/max77650-charger.yaml
+    $ref: /schemas/power/supply/max77650-charger.yaml
 
   leds:
-    $ref: ../leds/leds-max77650.yaml
+    $ref: /schemas/leds/leds-max77650.yaml
 
   onkey:
-    $ref: ../input/max77650-onkey.yaml
+    $ref: /schemas/input/max77650-onkey.yaml
 
 required:
   - compatible

diff --git a/Bindings/mfd/maxim,max77686.yaml b/Bindings/mfd/maxim,max77686.yaml
index d027aab..c13d51e 100644
--- a/Bindings/mfd/maxim,max77686.yaml
+++ b/Bindings/mfd/maxim,max77686.yaml

@@ -35,7 +35,7 @@
     maxItems: 1
 
   voltage-regulators:
-    $ref: ../regulator/maxim,max77686.yaml
+    $ref: /schemas/regulator/maxim,max77686.yaml
     description:
       List of child nodes that specify the regulators.
 

diff --git a/Bindings/mfd/maxim,max77693.yaml b/Bindings/mfd/maxim,max77693.yaml
index 6a6f222..cce273b 100644
--- a/Bindings/mfd/maxim,max77693.yaml
+++ b/Bindings/mfd/maxim,max77693.yaml

@@ -81,7 +81,7 @@
       - pwms
 
   regulators:
-    $ref: ../regulator/maxim,max77693.yaml
+    $ref: /schemas/regulator/maxim,max77693.yaml
     description:
       List of child nodes that specify the regulators.
 

diff --git a/Bindings/mfd/qcom,spmi-pmic.yaml b/Bindings/mfd/qcom,spmi-pmic.yaml
index 8103fb6..b7f01cb 100644
--- a/Bindings/mfd/qcom,spmi-pmic.yaml
+++ b/Bindings/mfd/qcom,spmi-pmic.yaml

@@ -160,6 +160,10 @@
     type: object
     $ref: /schemas/nvmem/qcom,spmi-sdam.yaml#
 
+  "^pbs@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/soc/qcom/qcom,pbs.yaml#
+
   "phy@[0-9a-f]+$":
     type: object
     $ref: /schemas/phy/qcom,snps-eusb2-repeater.yaml#

diff --git a/Bindings/mfd/qcom,tcsr.yaml b/Bindings/mfd/qcom,tcsr.yaml
index b97d770..c6bd14e 100644
--- a/Bindings/mfd/qcom,tcsr.yaml
+++ b/Bindings/mfd/qcom,tcsr.yaml

@@ -28,6 +28,7 @@
           - qcom,sdm845-tcsr
           - qcom,sdx55-tcsr
           - qcom,sdx65-tcsr
+          - qcom,sdx75-tcsr
           - qcom,sm4450-tcsr
           - qcom,sm6115-tcsr
           - qcom,sm8150-tcsr

diff --git a/Bindings/mfd/qcom-pm8xxx.yaml b/Bindings/mfd/qcom-pm8xxx.yaml
index 7fe3875..63e18d6 100644
--- a/Bindings/mfd/qcom-pm8xxx.yaml
+++ b/Bindings/mfd/qcom-pm8xxx.yaml

@@ -19,6 +19,7 @@
       - enum:
           - qcom,pm8058
           - qcom,pm8821
+          - qcom,pm8901
           - qcom,pm8921
       - items:
           - enum:

diff --git a/Bindings/mfd/richtek,rt4831.yaml b/Bindings/mfd/richtek,rt4831.yaml
index 4762eb1..e3ccba1 100644
--- a/Bindings/mfd/richtek,rt4831.yaml
+++ b/Bindings/mfd/richtek,rt4831.yaml

@@ -37,10 +37,10 @@
     maxItems: 1
 
   regulators:
-    $ref: ../regulator/richtek,rt4831-regulator.yaml
+    $ref: /schemas/regulator/richtek,rt4831-regulator.yaml
 
   backlight:
-    $ref: ../leds/backlight/richtek,rt4831-backlight.yaml
+    $ref: /schemas/leds/backlight/richtek,rt4831-backlight.yaml
 
 required:
   - compatible

diff --git a/Bindings/mfd/ricoh,rn5t618.yaml b/Bindings/mfd/ricoh,rn5t618.yaml
index 032a7fb..e3d6430 100644
--- a/Bindings/mfd/ricoh,rn5t618.yaml
+++ b/Bindings/mfd/ricoh,rn5t618.yaml

@@ -28,7 +28,7 @@
         regulators:
           patternProperties:
             "^(DCDC[1-4]|LDO[1-5]|LDORTC[12])$":
-              $ref: ../regulator/regulator.yaml
+              $ref: /schemas/regulator/regulator.yaml
           additionalProperties: false
   - if:
       properties:
@@ -40,7 +40,7 @@
         regulators:
           patternProperties:
             "^(DCDC[1-3]|LDO[1-5]|LDORTC[12])$":
-              $ref: ../regulator/regulator.yaml
+              $ref: /schemas/regulator/regulator.yaml
           additionalProperties: false
   - if:
       properties:
@@ -52,7 +52,7 @@
         regulators:
           patternProperties:
             "^(DCDC[1-5]|LDO[1-9]|LDO10|LDORTC[12])$":
-              $ref: ../regulator/regulator.yaml
+              $ref: /schemas/regulator/regulator.yaml
           additionalProperties: false
 
 properties:

diff --git a/Bindings/mfd/rockchip,rk805.yaml b/Bindings/mfd/rockchip,rk805.yaml
index 44f8188..da23915 100644
--- a/Bindings/mfd/rockchip,rk805.yaml
+++ b/Bindings/mfd/rockchip,rk805.yaml

@@ -82,7 +82,7 @@
     patternProperties:
       "^(DCDC_REG[1-4]|LDO_REG[1-3])$":
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
     unevaluatedProperties: false
 

diff --git a/Bindings/mfd/rockchip,rk808.yaml b/Bindings/mfd/rockchip,rk808.yaml
index d2ac6fb..50dfffa 100644
--- a/Bindings/mfd/rockchip,rk808.yaml
+++ b/Bindings/mfd/rockchip,rk808.yaml

@@ -109,7 +109,7 @@
     patternProperties:
       "^(DCDC_REG[1-4]|LDO_REG[1-8]|SWITCH_REG[1-2])$":
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
     unevaluatedProperties: false
 

diff --git a/Bindings/mfd/rockchip,rk816.yaml b/Bindings/mfd/rockchip,rk816.yaml
new file mode 100644
index 0000000..0676890
--- /dev/null
+++ b/Bindings/mfd/rockchip,rk816.yaml

@@ -0,0 +1,274 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk816.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK816 Power Management Integrated Circuit
+
+maintainers:
+  - Chris Zhong <zyw@rock-chips.com>
+  - Zhang Qing <zhangqing@rock-chips.com>
+
+description:
+  Rockchip RK816 series PMIC. This device consists of an i2c controlled MFD
+  that includes regulators, a RTC, a GPIO controller, a power button, and a
+  battery charger manager with fuel gauge.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk816
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    description:
+      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+    const: 1
+
+  clock-output-names:
+    maxItems: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  system-power-controller:
+    type: boolean
+    description:
+      Telling whether or not this PMIC is controlling the system power.
+
+  wakeup-source:
+    type: boolean
+
+  vcc1-supply:
+    description:
+      The input supply for dcdc1.
+
+  vcc2-supply:
+    description:
+      The input supply for dcdc2.
+
+  vcc3-supply:
+    description:
+      The input supply for dcdc3.
+
+  vcc4-supply:
+    description:
+      The input supply for dcdc4.
+
+  vcc5-supply:
+    description:
+      The input supply for ldo1, ldo2, and ldo3.
+
+  vcc6-supply:
+    description:
+      The input supply for ldo4, ldo5, and ldo6.
+
+  vcc7-supply:
+    description:
+      The input supply for boost.
+
+  vcc8-supply:
+    description:
+      The input supply for otg-switch.
+
+  regulators:
+    type: object
+    patternProperties:
+      '^(boost|dcdc[1-4]|ldo[1-6]|otg-switch)$':
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+    additionalProperties: false
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+    $ref: /schemas/pinctrl/pinmux-node.yaml
+
+    properties:
+      function:
+        enum: [gpio, thermistor]
+
+      pins:
+        $ref: /schemas/types.yaml#/definitions/string
+        const: gpio0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rk816: pmic@1a {
+            compatible = "rockchip,rk816";
+            reg = <0x1a>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+            clock-output-names = "xin32k", "rk816-clkout2";
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_int_l>;
+            gpio-controller;
+            system-power-controller;
+            wakeup-source;
+            #clock-cells = <1>;
+            #gpio-cells = <2>;
+
+            vcc1-supply = <&vcc_sys>;
+            vcc2-supply = <&vcc_sys>;
+            vcc3-supply = <&vcc_sys>;
+            vcc4-supply = <&vcc_sys>;
+            vcc5-supply = <&vcc33_io>;
+            vcc6-supply = <&vcc_sys>;
+
+            regulators {
+                vdd_cpu: dcdc1 {
+                    regulator-name = "vdd_cpu";
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <1450000>;
+                    regulator-ramp-delay = <6001>;
+                    regulator-initial-mode = <1>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_logic: dcdc2 {
+                    regulator-name = "vdd_logic";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1250000>;
+                    regulator-ramp-delay = <6001>;
+                    regulator-initial-mode = <1>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+
+                vcc_ddr: dcdc3 {
+                    regulator-name = "vcc_ddr";
+                    regulator-initial-mode = <1>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                vcc33_io: dcdc4 {
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vcc33_io";
+                    regulator-initial-mode = <1>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vccio_pmu: ldo1 {
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vccio_pmu";
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vcc_tp: ldo2 {
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vcc_tp";
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_10: ldo3 {
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-name = "vdd_10";
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+
+                vcc18_lcd: ldo4 {
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-name = "vcc18_lcd";
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vccio_sd: ldo5 {
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vccio_sd";
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vdd10_lcd: ldo6 {
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-name = "vdd10_lcd";
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+            };
+
+            rk816_gpio_pins: gpio-pins {
+                function = "gpio";
+                pins = "gpio0";
+            };
+        };
+    };

diff --git a/Bindings/mfd/rockchip,rk817.yaml b/Bindings/mfd/rockchip,rk817.yaml
index 92b1592..8c2fd0f 100644
--- a/Bindings/mfd/rockchip,rk817.yaml
+++ b/Bindings/mfd/rockchip,rk817.yaml

@@ -91,7 +91,7 @@
       "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$":
         type: object
         unevaluatedProperties: false
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
     unevaluatedProperties: false
 
   clocks:

diff --git a/Bindings/mfd/rockchip,rk818.yaml b/Bindings/mfd/rockchip,rk818.yaml
index fd4b9de..90d944c 100644
--- a/Bindings/mfd/rockchip,rk818.yaml
+++ b/Bindings/mfd/rockchip,rk818.yaml

@@ -101,7 +101,7 @@
     patternProperties:
       "^(DCDC_REG[1-4]|DCDC_BOOST|LDO_REG[1-9]|SWITCH_REG|HDMI_SWITCH|OTG_SWITCH)$":
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
     unevaluatedProperties: false
 

diff --git a/Bindings/mfd/rohm,bd71815-pmic.yaml b/Bindings/mfd/rohm,bd71815-pmic.yaml
index 05747e0..bb81307 100644
--- a/Bindings/mfd/rohm,bd71815-pmic.yaml
+++ b/Bindings/mfd/rohm,bd71815-pmic.yaml

@@ -61,7 +61,7 @@
     default: 30000000
 
   regulators:
-    $ref: ../regulator/rohm,bd71815-regulator.yaml
+    $ref: /schemas/regulator/rohm,bd71815-regulator.yaml
     description:
       List of child nodes that specify the regulators.
 

diff --git a/Bindings/mfd/rohm,bd71828-pmic.yaml b/Bindings/mfd/rohm,bd71828-pmic.yaml
index 11089aa..fa17686 100644
--- a/Bindings/mfd/rohm,bd71828-pmic.yaml
+++ b/Bindings/mfd/rohm,bd71828-pmic.yaml

@@ -17,7 +17,12 @@
 
 properties:
   compatible:
-    const: rohm,bd71828
+    oneOf:
+      - const: rohm,bd71828
+
+      - items:
+          - const: rohm,bd71879
+          - const: rohm,bd71828
 
   reg:
     description:
@@ -60,12 +65,12 @@
       here in Ohms.
 
   regulators:
-    $ref: ../regulator/rohm,bd71828-regulator.yaml
+    $ref: /schemas/regulator/rohm,bd71828-regulator.yaml
     description:
       List of child nodes that specify the regulators.
 
   leds:
-    $ref: ../leds/rohm,bd71828-leds.yaml
+    $ref: /schemas/leds/rohm,bd71828-leds.yaml
 
   gpio-reserved-ranges:
     description: |
@@ -73,6 +78,8 @@
       used to mark the pins which should not be configured for GPIO. Please see
       the ../gpio/gpio.txt for more information.
 
+  system-power-controller: true
+
 required:
   - compatible
   - reg

diff --git a/Bindings/mfd/rohm,bd71837-pmic.yaml b/Bindings/mfd/rohm,bd71837-pmic.yaml
index 7aa343f..08f958d 100644
--- a/Bindings/mfd/rohm,bd71837-pmic.yaml
+++ b/Bindings/mfd/rohm,bd71837-pmic.yaml

@@ -109,7 +109,7 @@
       - 14000
 
   regulators:
-    $ref: ../regulator/rohm,bd71837-regulator.yaml
+    $ref: /schemas/regulator/rohm,bd71837-regulator.yaml
     description:
       List of child nodes that specify the regulators.
 

diff --git a/Bindings/mfd/rohm,bd9571mwv.yaml b/Bindings/mfd/rohm,bd9571mwv.yaml
index 89f9efe..534cf03 100644
--- a/Bindings/mfd/rohm,bd9571mwv.yaml
+++ b/Bindings/mfd/rohm,bd9571mwv.yaml

@@ -67,7 +67,7 @@
     patternProperties:
       "^(vd09|vd18|vd25|vd33|dvfs)$":
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
 
         properties:
           regulator-name:

diff --git a/Bindings/mfd/rohm,bd9576-pmic.yaml b/Bindings/mfd/rohm,bd9576-pmic.yaml
index b7b323b..70fd9b5 100644
--- a/Bindings/mfd/rohm,bd9576-pmic.yaml
+++ b/Bindings/mfd/rohm,bd9576-pmic.yaml

@@ -71,7 +71,7 @@
       # (HW) minimum for max timeout is 4ms, maximum 4416 ms.
 
   regulators:
-    $ref: ../regulator/rohm,bd9576-regulator.yaml
+    $ref: /schemas/regulator/rohm,bd9576-regulator.yaml
     description:
       List of child nodes that specify the regulators.
 

diff --git a/Bindings/mfd/samsung,s2mpa01.yaml b/Bindings/mfd/samsung,s2mpa01.yaml
index 055dfc3..ad92eb6 100644
--- a/Bindings/mfd/samsung,s2mpa01.yaml
+++ b/Bindings/mfd/samsung,s2mpa01.yaml

@@ -27,7 +27,7 @@
     maxItems: 1
 
   regulators:
-    $ref: ../regulator/samsung,s2mpa01.yaml
+    $ref: /schemas/regulator/samsung,s2mpa01.yaml
     description:
       List of child nodes that specify the regulators.
 

diff --git a/Bindings/mfd/samsung,s2mps11.yaml b/Bindings/mfd/samsung,s2mps11.yaml
index 5ff6546..bc8b594 100644
--- a/Bindings/mfd/samsung,s2mps11.yaml
+++ b/Bindings/mfd/samsung,s2mps11.yaml

@@ -27,7 +27,7 @@
       - samsung,s2mpu02-pmic
 
   clocks:
-    $ref: ../clock/samsung,s2mps11.yaml
+    $ref: /schemas/clock/samsung,s2mps11.yaml
     description:
       Child node describing clock provider.
 
@@ -75,7 +75,7 @@
     then:
       properties:
         regulators:
-          $ref: ../regulator/samsung,s2mps11.yaml
+          $ref: /schemas/regulator/samsung,s2mps11.yaml
         samsung,s2mps11-wrstbi-ground: false
 
   - if:
@@ -86,7 +86,7 @@
     then:
       properties:
         regulators:
-          $ref: ../regulator/samsung,s2mps13.yaml
+          $ref: /schemas/regulator/samsung,s2mps13.yaml
         samsung,s2mps11-acokb-ground: false
 
   - if:
@@ -97,7 +97,7 @@
     then:
       properties:
         regulators:
-          $ref: ../regulator/samsung,s2mps14.yaml
+          $ref: /schemas/regulator/samsung,s2mps14.yaml
         samsung,s2mps11-acokb-ground: false
         samsung,s2mps11-wrstbi-ground: false
 
@@ -109,7 +109,7 @@
     then:
       properties:
         regulators:
-          $ref: ../regulator/samsung,s2mps15.yaml
+          $ref: /schemas/regulator/samsung,s2mps15.yaml
         samsung,s2mps11-acokb-ground: false
         samsung,s2mps11-wrstbi-ground: false
 
@@ -121,7 +121,7 @@
     then:
       properties:
         regulators:
-          $ref: ../regulator/samsung,s2mpu02.yaml
+          $ref: /schemas/regulator/samsung,s2mpu02.yaml
         samsung,s2mps11-acokb-ground: false
         samsung,s2mps11-wrstbi-ground: false
 

diff --git a/Bindings/mfd/samsung,s5m8767.yaml b/Bindings/mfd/samsung,s5m8767.yaml
index aea0b7d..2492480 100644
--- a/Bindings/mfd/samsung,s5m8767.yaml
+++ b/Bindings/mfd/samsung,s5m8767.yaml

@@ -21,7 +21,7 @@
     const: samsung,s5m8767-pmic
 
   clocks:
-    $ref: ../clock/samsung,s2mps11.yaml
+    $ref: /schemas/clock/samsung,s2mps11.yaml
     description:
       Child node describing clock provider.
 
@@ -32,7 +32,7 @@
     maxItems: 1
 
   regulators:
-    $ref: ../regulator/samsung,s5m8767.yaml
+    $ref: /schemas/regulator/samsung,s5m8767.yaml
     description:
       List of child nodes that specify the regulators.
 

diff --git a/Bindings/mfd/st,stm32-lptimer.yaml b/Bindings/mfd/st,stm32-lptimer.yaml
index 27329c5..d413088 100644
--- a/Bindings/mfd/st,stm32-lptimer.yaml
+++ b/Bindings/mfd/st,stm32-lptimer.yaml

@@ -44,6 +44,10 @@
 
   wakeup-source: true
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
   pwm:
     type: object
     additionalProperties: false

diff --git a/Bindings/mfd/st,stm32-timers.yaml b/Bindings/mfd/st,stm32-timers.yaml
index f84e09a..b0e438f 100644
--- a/Bindings/mfd/st,stm32-timers.yaml
+++ b/Bindings/mfd/st,stm32-timers.yaml

@@ -67,6 +67,10 @@
   "#size-cells":
     const: 0
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
   pwm:
     type: object
     additionalProperties: false

diff --git a/Bindings/mfd/st,stmfx.yaml b/Bindings/mfd/st,stmfx.yaml
index 76551c9..61daf36 100644
--- a/Bindings/mfd/st,stmfx.yaml
+++ b/Bindings/mfd/st,stmfx.yaml

@@ -60,7 +60,7 @@
         additionalProperties: false
 
         allOf:
-          - $ref: ../pinctrl/pinmux-node.yaml
+          - $ref: /schemas/pinctrl/pinmux-node.yaml
 
         properties:
           pins: true

diff --git a/Bindings/mfd/st,stpmic1.yaml b/Bindings/mfd/st,stpmic1.yaml
index b17ebeb..e822817 100644
--- a/Bindings/mfd/st,stpmic1.yaml
+++ b/Bindings/mfd/st,stpmic1.yaml

@@ -29,7 +29,7 @@
   onkey:
     type: object
 
-    $ref: ../input/input.yaml
+    $ref: /schemas/input/input.yaml
 
     properties:
       compatible:
@@ -67,7 +67,7 @@
   watchdog:
     type: object
 
-    $ref: ../watchdog/watchdog.yaml
+    $ref: /schemas/watchdog/watchdog.yaml
 
     properties:
       compatible:

diff --git a/Bindings/mfd/stericsson,ab8500.yaml b/Bindings/mfd/stericsson,ab8500.yaml
index 94f9767..b2cfa41 100644
--- a/Bindings/mfd/stericsson,ab8500.yaml
+++ b/Bindings/mfd/stericsson,ab8500.yaml

@@ -126,7 +126,7 @@
     patternProperties:
       "^channel@[0-9a-f]+$":
         type: object
-        $ref: ../iio/adc/adc.yaml#
+        $ref: /schemas/iio/adc/adc.yaml#
         description: Represents each of the external channels which are
           connected to the ADC.
 
@@ -180,22 +180,22 @@
   ab8500_fg:
     description: Node describing the AB8500 fuel gauge control block.
     type: object
-    $ref: ../power/supply/stericsson,ab8500-fg.yaml
+    $ref: /schemas/power/supply/stericsson,ab8500-fg.yaml
 
   ab8500_btemp:
     description: Node describing the AB8500 battery temperature control block.
     type: object
-    $ref: ../power/supply/stericsson,ab8500-btemp.yaml
+    $ref: /schemas/power/supply/stericsson,ab8500-btemp.yaml
 
   ab8500_charger:
     description: Node describing the AB8500 battery charger control block.
     type: object
-    $ref: ../power/supply/stericsson,ab8500-charger.yaml
+    $ref: /schemas/power/supply/stericsson,ab8500-charger.yaml
 
   ab8500_chargalg:
     description: Node describing the AB8500 battery charger algorithm.
     type: object
-    $ref: ../power/supply/stericsson,ab8500-chargalg.yaml
+    $ref: /schemas/power/supply/stericsson,ab8500-chargalg.yaml
 
   phy:
     description: Node describing the AB8500 USB PHY control block.
@@ -339,40 +339,40 @@
       ab8500_ldo_aux1:
         description: The voltage for the auxiliary LDO regulator 1
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_aux2:
         description: The voltage for the auxiliary LDO regulator 2
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_aux3:
         description: The voltage for the auxiliary LDO regulator 3
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_aux4:
         description: The voltage for the auxiliary LDO regulator 4
           only present on AB8505
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_aux5:
         description: The voltage for the auxiliary LDO regulator 5
           only present on AB8505
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_aux6:
         description: The voltage for the auxiliary LDO regulator 6
           only present on AB8505
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       # There is never any AUX7 regulator which is confusing
@@ -381,21 +381,21 @@
         description: The voltage for the auxiliary LDO regulator 8
           only present on AB8505
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_intcore:
         description: The LDO regulator for the internal core voltage
           of the AB8500
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_adc:
         description: Analog power regulator for the analog to digital converter
           ADC, only present on AB8505
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_tvout:
@@ -404,39 +404,39 @@
           the temperature of the NTC thermistor on the battery.
           Only present on AB8500.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_audio:
         description: The LDO regulator for the audio codec output
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_anamic1:
         description: The LDO regulator for the analog microphone 1
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_anamic2:
         description: The LDO regulator for the analog microphone 2
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_dmic:
         description: The LDO regulator for the digital microphone
           only present on AB8500
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_ana:
         description: Analog power regulator for CSI and DSI interfaces,
           Camera Serial Interface CSI and Display Serial Interface DSI.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
     required:
@@ -459,19 +459,19 @@
       ab8500_ext1:
         description: The voltage for the VSMPS1 external regulator
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ext2:
         description: The voltage for the VSMPS2 external regulator
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ext3:
         description: The voltage for the VSMPS3 external regulator
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
     required:
@@ -482,7 +482,7 @@
 patternProperties:
   "^pwm@[1-9]+?$":
     type: object
-    $ref: ../pwm/pwm.yaml#
+    $ref: /schemas/pwm/pwm.yaml#
     unevaluatedProperties: false
     description: Represents each of the PWM blocks in the AB8500
 

diff --git a/Bindings/mfd/stericsson,db8500-prcmu.yaml b/Bindings/mfd/stericsson,db8500-prcmu.yaml
index cb2a42c..d6c1377 100644
--- a/Bindings/mfd/stericsson,db8500-prcmu.yaml
+++ b/Bindings/mfd/stericsson,db8500-prcmu.yaml

@@ -71,52 +71,52 @@
         description: The voltage for the application processor, the
           main voltage domain for the chip.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_varm:
         description: The voltage for the ARM Cortex-A9 CPU.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_vmodem:
         description: The voltage for the modem subsystem.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_vpll:
         description: The voltage for the phase locked loop clocks.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_vsmps1:
         description: Also known as VIO12, is a step-down voltage regulator
           for 1.2V I/O. SMPS means System Management Power Source.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_vsmps2:
         description: Also known as VIO18, is a step-down voltage regulator
           for 1.8V I/O. SMPS means System Management Power Source.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_vsmps3:
         description: This is a step-down voltage regulator
           for 0.87 thru 1.875V I/O. SMPS means System Management Power Source.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_vrf1:
         description: RF transceiver voltage regulator.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_sva_mmdsp:
@@ -124,21 +124,21 @@
           voltage regulator. This is the voltage for the accelerator DSP
           for video encoding and decoding.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_sva_mmdsp_ret:
         description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP)
           voltage regulator for retention mode.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_sva_pipe:
         description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP)
           voltage regulator for the data pipe.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_sia_mmdsp:
@@ -146,21 +146,21 @@
           voltage regulator. This is the voltage for the accelerator DSP
           for image encoding and decoding.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_sia_mmdsp_ret:
         description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP)
           voltage regulator for retention mode.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_sia_pipe:
         description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP)
           voltage regulator for the data pipe.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_sga:
@@ -168,7 +168,7 @@
           This is in effect controlling the power to the MALI400 3D
           accelerator block.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_b2r2_mcde:
@@ -176,33 +176,33 @@
           Display Engine (MCDE) voltage regulator. These are two graphics
           blocks.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_esram12:
         description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_esram12_ret:
         description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator for
           retention mode.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_esram34:
         description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_esram34_ret:
         description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator for
           retention mode.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
     required:

diff --git a/Bindings/mfd/syscon.yaml b/Bindings/mfd/syscon.yaml
index 9d55bee..7ed12a9 100644
--- a/Bindings/mfd/syscon.yaml
+++ b/Bindings/mfd/syscon.yaml

@@ -38,11 +38,20 @@
               - allwinner,sun8i-h3-system-controller
               - allwinner,sun8i-v3s-system-controller
               - allwinner,sun50i-a64-system-controller
+              - altr,sdr-ctl
               - amd,pensando-elba-syscon
+              - apm,xgene-csw
+              - apm,xgene-efuse
+              - apm,xgene-mcb
+              - apm,xgene-rb
+              - apm,xgene-scu
               - brcm,cru-clkset
+              - brcm,sr-cdru
+              - brcm,sr-mhb
               - freecom,fsg-cs2-system-controller
               - fsl,imx93-aonmix-ns-syscfg
               - fsl,imx93-wakeupmix-syscfg
+              - fsl,ls1088a-reset
               - hisilicon,dsa-subctrl
               - hisilicon,hi6220-sramctrl
               - hisilicon,pcie-sas-subctrl
@@ -51,9 +60,15 @@
               - intel,lgm-syscon
               - loongson,ls1b-syscon
               - loongson,ls1c-syscon
+              - marvell,armada-3700-cpu-misc
+              - marvell,armada-3700-nb-pm
+              - marvell,armada-3700-avs
               - marvell,armada-3700-usb2-host-misc
+              - mediatek,mt2712-pctl-a-syscfg
+              - mediatek,mt6397-pctl-pmic-syscfg
               - mediatek,mt8135-pctl-a-syscfg
               - mediatek,mt8135-pctl-b-syscfg
+              - mediatek,mt8173-pctl-a-syscfg
               - mediatek,mt8365-syscfg
               - microchip,lan966x-cpu-syscon
               - microchip,sparx5-cpu-syscon
@@ -73,6 +88,7 @@
               - rockchip,rv1126-qos
               - starfive,jh7100-sysmain
               - ti,am62-usb-phy-ctrl
+              - ti,am62p-cpsw-mac-efuse
               - ti,am654-dss-oldi-io-ctrl
               - ti,am654-serdes-ctrl
               - ti,j784s4-pcie-ctrl

diff --git a/Bindings/mfd/ti,lp8732.yaml b/Bindings/mfd/ti,lp8732.yaml
new file mode 100644
index 0000000..9a90cee
--- /dev/null
+++ b/Bindings/mfd/ti,lp8732.yaml

@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,lp8732.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LP873X Power Management Integrated Circuit
+
+maintainers:
+  - J Keerthy <j-keerthy@ti.com>
+
+description:
+  PMIC with two high-current buck converters and two linear regulators.
+
+properties:
+  compatible:
+    enum:
+      - ti,lp8732
+      - ti,lp8733
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  regulators:
+    description:
+      List of child nodes that specify the regulator initialization data.
+    type: object
+    patternProperties:
+      "^buck[01]|ldo[01]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+    additionalProperties: false
+
+patternProperties:
+  '^(buck[01]|ldo[01])-in-supply$':
+    description: Phandle to parent supply of each regulator populated under regulators node.
+
+required:
+  - compatible
+  - reg
+  - regulators
+  - buck0-in-supply
+  - buck1-in-supply
+  - ldo0-in-supply
+  - ldo1-in-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic: pmic@60 {
+            compatible = "ti,lp8733";
+            reg = <0x60>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            buck0-in-supply = <&vsys_3v3>;
+            buck1-in-supply = <&vsys_3v3>;
+            ldo0-in-supply = <&vsys_3v3>;
+            ldo1-in-supply = <&vsys_3v3>;
+
+            regulators {
+                buck0: buck0 {
+                    regulator-name = "buck0";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1400000>;
+                    regulator-min-microamp = <1500000>;
+                    regulator-max-microamp = <4000000>;
+                    regulator-ramp-delay = <10000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+
+                buck1: buck1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1400000>;
+                    regulator-min-microamp = <1500000>;
+                    regulator-max-microamp = <4000000>;
+                    regulator-ramp-delay = <10000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo0: ldo0 {
+                    regulator-name = "ldo0";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo1: ldo1 {
+                    regulator-name = "ldo1";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+            };
+        };
+    };

diff --git a/Bindings/mfd/ti,tps65086.yaml b/Bindings/mfd/ti,tps65086.yaml
index bd36a07..a8eed90 100644
--- a/Bindings/mfd/ti,tps65086.yaml
+++ b/Bindings/mfd/ti,tps65086.yaml

@@ -49,7 +49,7 @@
     patternProperties:
       "^buck[1-6]$":
         type: object
-        $ref: ../regulator/regulator.yaml
+        $ref: /schemas/regulator/regulator.yaml
 
         properties:
           regulator-name: true
@@ -72,7 +72,7 @@
 
       "^(ldoa[1-3]|swa1|swb[1-2]|vtt)$":
         type: object
-        $ref: ../regulator/regulator.yaml
+        $ref: /schemas/regulator/regulator.yaml
 
         properties:
           regulator-name: true

diff --git a/Bindings/mfd/ti,tps6594.yaml b/Bindings/mfd/ti,tps6594.yaml
index 9d43376..6341b60 100644
--- a/Bindings/mfd/ti,tps6594.yaml
+++ b/Bindings/mfd/ti,tps6594.yaml

@@ -21,6 +21,7 @@
       - ti,lp8764-q1
       - ti,tps6593-q1
       - ti,tps6594-q1
+      - ti,tps65224-q1
 
   reg:
     description: I2C slave address or SPI chip select number.

diff --git a/Bindings/mfd/ti,twl.yaml b/Bindings/mfd/ti,twl.yaml
index 52ed228..c2357fe 100644
--- a/Bindings/mfd/ti,twl.yaml
+++ b/Bindings/mfd/ti,twl.yaml

@@ -15,6 +15,67 @@
   USB transceiver or Audio amplifier.
   These chips are connected to an i2c bus.
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,twl4030
+    then:
+      properties:
+        madc:
+          type: object
+          $ref: /schemas/iio/adc/ti,twl4030-madc.yaml
+          unevaluatedProperties: false
+
+        bci:
+          type: object
+          $ref: /schemas/power/supply/twl4030-charger.yaml
+          unevaluatedProperties: false
+
+        pwrbutton:
+          type: object
+          additionalProperties: false
+          properties:
+            compatible:
+              const: ti,twl4030-pwrbutton
+            interrupts:
+              items:
+                - items:
+                    const: 8
+
+        watchdog:
+          type: object
+          additionalProperties: false
+          properties:
+            compatible:
+              const: ti,twl4030-wdt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,twl6030
+    then:
+      properties:
+        gpadc:
+          type: object
+          properties:
+            compatible:
+              const: ti,twl6030-gpadc
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,twl6032
+    then:
+      properties:
+        gpadc:
+          type: object
+          properties:
+            compatible:
+              const: ti,twl6032-gpadc
+
 properties:
   compatible:
     description:
@@ -42,7 +103,16 @@
   "#clock-cells":
     const: 1
 
-additionalProperties: false
+  rtc:
+    type: object
+    additionalProperties: false
+    properties:
+      compatible:
+        const: ti,twl4030-rtc
+      interrupts:
+        maxItems: 1
+
+unevaluatedProperties: false
 
 required:
   - compatible

diff --git a/Bindings/mfd/x-powers,axp152.yaml b/Bindings/mfd/x-powers,axp152.yaml
index 06f1779..b8e8db0 100644
--- a/Bindings/mfd/x-powers,axp152.yaml
+++ b/Bindings/mfd/x-powers,axp152.yaml

@@ -83,6 +83,7 @@
             enum:
               - x-powers,axp313a
               - x-powers,axp15060
+              - x-powers,axp717
 
     then:
       properties:
@@ -99,6 +100,7 @@
           - x-powers,axp221
           - x-powers,axp223
           - x-powers,axp313a
+          - x-powers,axp717
           - x-powers,axp803
           - x-powers,axp806
           - x-powers,axp809

diff --git a/Bindings/mmc/arm,pl18x.yaml b/Bindings/mmc/arm,pl18x.yaml
index 940b126..8f62e2c 100644
--- a/Bindings/mmc/arm,pl18x.yaml
+++ b/Bindings/mmc/arm,pl18x.yaml

@@ -79,6 +79,10 @@
           - const: rx
           - const: tx
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
   power-domains: true
 
   resets:

diff --git a/Bindings/mmc/fsl-imx-esdhc.yaml b/Bindings/mmc/fsl-imx-esdhc.yaml
index 82f7ee8..b9b9995 100644
--- a/Bindings/mmc/fsl-imx-esdhc.yaml
+++ b/Bindings/mmc/fsl-imx-esdhc.yaml

@@ -91,6 +91,9 @@
           - enum:
               - fsl,imxrt1170-usdhc
           - const: fsl,imxrt1050-usdhc
+      - items:
+          - const: nxp,s32g3-usdhc
+          - const: nxp,s32g2-usdhc
 
   reg:
     maxItems: 1

diff --git a/Bindings/mmc/renesas,sdhi.yaml b/Bindings/mmc/renesas,sdhi.yaml
index 29f2400..3d0e61e 100644
--- a/Bindings/mmc/renesas,sdhi.yaml
+++ b/Bindings/mmc/renesas,sdhi.yaml

@@ -12,16 +12,13 @@
 properties:
   compatible:
     oneOf:
-      - items:
-          - const: renesas,sdhi-sh73a0  # R-Mobile APE6
-      - items:
-          - const: renesas,sdhi-r7s72100 # RZ/A1H
-      - items:
-          - const: renesas,sdhi-r7s9210 # SH-Mobile AG5
-      - items:
-          - const: renesas,sdhi-r8a73a4 # R-Mobile APE6
-      - items:
-          - const: renesas,sdhi-r8a7740 # R-Mobile A1
+      - enum:
+          - renesas,sdhi-mmc-r8a77470 # RZ/G1C
+          - renesas,sdhi-r7s72100 # RZ/A1H
+          - renesas,sdhi-r7s9210 # SH-Mobile AG5
+          - renesas,sdhi-r8a73a4 # R-Mobile APE6
+          - renesas,sdhi-r8a7740 # R-Mobile A1
+          - renesas,sdhi-sh73a0  # R-Mobile APE6
       - items:
           - enum:
               - renesas,sdhi-r8a7778 # R-Car M1
@@ -41,8 +38,6 @@
               - renesas,sdhi-r8a7794  # R-Car E2
           - const: renesas,rcar-gen2-sdhi # R-Car Gen2 and RZ/G1
       - items:
-          - const: renesas,sdhi-mmc-r8a77470 # RZ/G1C (SDHI/MMC IP)
-      - items:
           - enum:
               - renesas,sdhi-r8a774a1  # RZ/G2M
               - renesas,sdhi-r8a774b1  # RZ/G2N
@@ -56,11 +51,6 @@
               - renesas,sdhi-r8a77980  # R-Car V3H
               - renesas,sdhi-r8a77990  # R-Car E3
               - renesas,sdhi-r8a77995  # R-Car D3
-              - renesas,sdhi-r9a07g043 # RZ/G2UL and RZ/Five
-              - renesas,sdhi-r9a07g044 # RZ/G2{L,LC}
-              - renesas,sdhi-r9a07g054 # RZ/V2L
-              - renesas,sdhi-r9a08g045 # RZ/G3S
-              - renesas,sdhi-r9a09g011 # RZ/V2M
           - const: renesas,rcar-gen3-sdhi # R-Car Gen3 or RZ/G2
       - items:
           - enum:
@@ -69,6 +59,14 @@
               - renesas,sdhi-r8a779g0  # R-Car V4H
               - renesas,sdhi-r8a779h0  # R-Car V4M
           - const: renesas,rcar-gen4-sdhi # R-Car Gen4
+      - items:
+          - enum:
+              - renesas,sdhi-r9a07g043 # RZ/G2UL and RZ/Five
+              - renesas,sdhi-r9a07g044 # RZ/G2{L,LC}
+              - renesas,sdhi-r9a07g054 # RZ/V2L
+              - renesas,sdhi-r9a08g045 # RZ/G3S
+              - renesas,sdhi-r9a09g011 # RZ/V2M
+          - const: renesas,rzg2l-sdhi
 
   reg:
     maxItems: 1
@@ -120,12 +118,7 @@
       properties:
         compatible:
           contains:
-            enum:
-              - renesas,sdhi-r9a07g043
-              - renesas,sdhi-r9a07g044
-              - renesas,sdhi-r9a07g054
-              - renesas,sdhi-r9a08g045
-              - renesas,sdhi-r9a09g011
+            const: renesas,rzg2l-sdhi
     then:
       properties:
         clocks:

diff --git a/Bindings/mtd/mtd.yaml b/Bindings/mtd/mtd.yaml
index ee442ec..bbb5621 100644
--- a/Bindings/mtd/mtd.yaml
+++ b/Bindings/mtd/mtd.yaml

@@ -48,8 +48,8 @@
     type: object
 
     allOf:
-      - $ref: ../nvmem/nvmem.yaml#
-      - $ref: ../nvmem/nvmem-deprecated-cells.yaml#
+      - $ref: /schemas/nvmem/nvmem.yaml#
+      - $ref: /schemas/nvmem/nvmem-deprecated-cells.yaml#
 
     unevaluatedProperties: false
 

diff --git a/Bindings/mtd/partitions/binman.yaml b/Bindings/mtd/partitions/binman.yaml
new file mode 100644
index 0000000..bb4b085
--- /dev/null
+++ b/Bindings/mtd/partitions/binman.yaml

@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/binman.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binman entries
+
+description: |
+  This corresponds to a binman 'entry'. It is a single partition which holds
+  data of a defined type.
+
+  Binman uses the type to indicate what data file / type to place in the
+  partition. There are quite a number of binman-specific entry types, such as
+  section, fill and files, to be added later.
+
+maintainers:
+  - Simon Glass <sjg@chromium.org>
+
+allOf:
+  - $ref: /schemas/mtd/partitions/partition.yaml#
+
+properties:
+  compatible:
+    enum:
+      - u-boot       # u-boot.bin from U-Boot project
+      - tfa-bl31     # bl31.bin or bl31.elf from TF-A project
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@100000 {
+            compatible = "u-boot";
+            reg = <0x100000 0xf00000>;
+            align-size = <0x1000>;
+            align-end = <0x10000>;
+        };
+
+        partition@200000 {
+            compatible = "tfa-bl31";
+            reg = <0x200000 0x100000>;
+            align = <0x4000>;
+        };
+    };

diff --git a/Bindings/mtd/partitions/partition.yaml b/Bindings/mtd/partitions/partition.yaml
index 1ebe9e2..80d0452 100644
--- a/Bindings/mtd/partitions/partition.yaml
+++ b/Bindings/mtd/partitions/partition.yaml

@@ -57,6 +57,57 @@
       user space from
     type: boolean
 
+  align:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 2
+    maximum: 0x80000000
+    multipleOf: 2
+    description:
+      This sets the alignment of the entry in bytes.
+
+      The entry offset is adjusted so that the entry starts on an aligned
+      boundary within the containing section or image. For example ‘align =
+      <16>’ means that the entry will start on a 16-byte boundary. This may
+      mean that padding is added before the entry. The padding is part of
+      the containing section but is not included in the entry, meaning that
+      an empty space may be created before the entry starts. Alignment
+      must be a power of 2. If ‘align’ is not provided, no alignment is
+      performed.
+
+  align-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 2
+    maximum: 0x80000000
+    multipleOf: 2
+    description:
+      This sets the alignment of the entry size in bytes. It must be a power
+      of 2.
+
+      For example, to ensure that the size of an entry is a multiple of 64
+      bytes, set this to 64. While this does not affect the content of the
+      entry itself (the padding is performed only when its parent section is
+      assembled), the end result is that the entry ends with the padding
+      bytes, so may grow. If ‘align-size’ is not provided, no alignment is
+      performed.
+
+  align-end:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 2
+    maximum: 0x80000000
+    multipleOf: 2
+    description:
+      This sets the alignment (in bytes) of the end of an entry with respect
+      to the containing section. It must be a power of 2.
+
+      Some entries require that they end on an alignment boundary,
+      regardless of where they start. This does not move the start of the
+      entry, so the content of the entry will still start at the beginning.
+      But there may be padding at the end. While this does not affect the
+      content of the entry itself (the padding is performed only when its
+      parent section is assembled), the end result is that the entry ends
+      with the padding bytes, so may grow. If ‘align-end’ is not provided,
+      no alignment is performed.
+
 if:
   not:
     required: [ reg ]
@@ -67,3 +118,24 @@
 
 # This is a generic file other binding inherit from and extend
 additionalProperties: true
+
+examples:
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@100000 {
+            compatible = "u-boot";
+            reg = <0x100000 0xf00000>;
+            align-size = <0x1000>;
+            align-end = <0x10000>;
+        };
+
+        partition@200000 {
+            compatible = "tfa-bl31";
+            reg = <0x200000 0x100000>;
+            align = <0x4000>;
+        };
+    };

diff --git a/Bindings/mtd/samsung,s5pv210-onenand.yaml b/Bindings/mtd/samsung,s5pv210-onenand.yaml
new file mode 100644
index 0000000..e07941b
--- /dev/null
+++ b/Bindings/mtd/samsung,s5pv210-onenand.yaml

@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/samsung,s5pv210-onenand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5Pv210 SoC OneNAND Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-onenand
+
+  reg:
+    items:
+      - description: Control registers
+      - description: OneNAND interface nCE[0]
+      - description: OneNAND interface nCE[1]
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: bus
+      - const: onenand
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+allOf:
+  - $ref: nand-controller.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/s5pv210.h>
+
+    nand-controller@b0600000 {
+        compatible = "samsung,s5pv210-onenand";
+        reg = <0xb0600000 0x2000>,
+              <0xb0000000 0x20000>,
+              <0xb0040000 0x20000>;
+        clocks = <&clocks CLK_NANDXL>, <&clocks DOUT_FLASH>;
+        clock-names = "bus", "onenand";
+        interrupt-parent = <&vic1>;
+        interrupts = <31>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nand@0 {
+            reg = <0>;
+        };
+    };

diff --git a/Bindings/net/airoha,en8811h.yaml b/Bindings/net/airoha,en8811h.yaml
new file mode 100644
index 0000000..ecb5149
--- /dev/null
+++ b/Bindings/net/airoha,en8811h.yaml

@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/airoha,en8811h.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN8811H PHY
+
+maintainers:
+  - Eric Woudstra <ericwouds@gmail.com>
+
+description:
+  The Airoha EN8811H PHY has the ability to reverse polarity
+  on the lines to and/or from the MAC. It is reversed by
+  the booleans in the devicetree node of the phy.
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ethernet-phy-id03a2.a411
+
+  reg:
+    maxItems: 1
+
+  airoha,pnswap-rx:
+    type: boolean
+    description:
+      Reverse rx polarity of the SERDES. This is the receiving
+      side of the lines from the MAC towards the EN881H.
+
+  airoha,pnswap-tx:
+    type: boolean
+    description:
+      Reverse tx polarity of SERDES. This is the transmitting
+      side of the lines from EN8811H towards the MAC.
+
+required:
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@1 {
+            compatible = "ethernet-phy-id03a2.a411";
+            reg = <1>;
+            airoha,pnswap-rx;
+        };
+    };

diff --git a/Bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml b/Bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml
new file mode 100644
index 0000000..67ff7ca
--- /dev/null
+++ b/Bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml

@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/mediatek,mt7921s-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7921S Bluetooth
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+description:
+  MT7921S is an SDIO-attached dual-radio WiFi+Bluetooth Combo chip; each
+  function is its own SDIO function on a shared SDIO interface. The chip
+  has two dedicated reset lines, one for each function core.
+  This binding only covers the Bluetooth SDIO function, with one device
+  node describing only this SDIO function.
+
+allOf:
+  - $ref: bluetooth-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7921s-bluetooth
+
+  reg:
+    const: 2
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      An active-low reset line for the Bluetooth core; on typical M.2
+      key E modules this is the W_DISABLE2# pin.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    mmc {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bluetooth@2 {
+            compatible = "mediatek,mt7921s-bluetooth";
+            reg = <2>;
+            reset-gpios = <&pio 8 GPIO_ACTIVE_LOW>;
+        };
+    };

diff --git a/Bindings/net/broadcom-bluetooth.yaml b/Bindings/net/broadcom-bluetooth.yaml
index cc70b00..4a1bfc2 100644
--- a/Bindings/net/broadcom-bluetooth.yaml
+++ b/Bindings/net/broadcom-bluetooth.yaml

@@ -14,20 +14,25 @@
 
 properties:
   compatible:
-    enum:
-      - brcm,bcm20702a1
-      - brcm,bcm4329-bt
-      - brcm,bcm4330-bt
-      - brcm,bcm4334-bt
-      - brcm,bcm43430a0-bt
-      - brcm,bcm43430a1-bt
-      - brcm,bcm43438-bt
-      - brcm,bcm4345c5
-      - brcm,bcm43540-bt
-      - brcm,bcm4335a0
-      - brcm,bcm4349-bt
-      - cypress,cyw4373a0-bt
-      - infineon,cyw55572-bt
+    oneOf:
+      - items:
+          - enum:
+              - infineon,cyw43439-bt
+          - const: brcm,bcm4329-bt
+      - enum:
+          - brcm,bcm20702a1
+          - brcm,bcm4329-bt
+          - brcm,bcm4330-bt
+          - brcm,bcm4334-bt
+          - brcm,bcm43430a0-bt
+          - brcm,bcm43430a1-bt
+          - brcm,bcm43438-bt
+          - brcm,bcm4345c5
+          - brcm,bcm43540-bt
+          - brcm,bcm4335a0
+          - brcm,bcm4349-bt
+          - cypress,cyw4373a0-bt
+          - infineon,cyw55572-bt
 
   shutdown-gpios:
     maxItems: 1

diff --git a/Bindings/net/can/bosch,m_can.yaml b/Bindings/net/can/bosch,m_can.yaml
index f9ffb96..c488752 100644
--- a/Bindings/net/can/bosch,m_can.yaml
+++ b/Bindings/net/can/bosch,m_can.yaml

@@ -118,6 +118,10 @@
   phys:
     maxItems: 1
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

diff --git a/Bindings/net/fsl,fman-dtsec.yaml b/Bindings/net/fsl,fman-dtsec.yaml
index c80c880..60aaf30 100644
--- a/Bindings/net/fsl,fman-dtsec.yaml
+++ b/Bindings/net/fsl,fman-dtsec.yaml

@@ -128,7 +128,6 @@
   - cell-index
   - reg
   - fsl,fman-ports
-  - ptp-timer
 
 dependencies:
   pcs-handle-names:

diff --git a/Bindings/net/nxp,dwmac-imx.yaml b/Bindings/net/nxp,dwmac-imx.yaml
index 4c01cae..87bc441 100644
--- a/Bindings/net/nxp,dwmac-imx.yaml
+++ b/Bindings/net/nxp,dwmac-imx.yaml

@@ -66,6 +66,10 @@
       Should be phandle/offset pair. The phandle to the syscon node which
       encompases the GPR register, and the offset of the GPR register.
 
+  nvmem-cells: true
+
+  nvmem-cell-names: true
+
   snps,rmii_refclk_ext:
     $ref: /schemas/types.yaml#/definitions/flag
     description:

diff --git a/Bindings/net/pse-pd/microchip,pd692x0.yaml b/Bindings/net/pse-pd/microchip,pd692x0.yaml
new file mode 100644
index 0000000..fd4244f
--- /dev/null
+++ b/Bindings/net/pse-pd/microchip,pd692x0.yaml

@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pse-pd/microchip,pd692x0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PD692x0 Power Sourcing Equipment controller
+
+maintainers:
+  - Kory Maincent <kory.maincent@bootlin.com>
+
+allOf:
+  - $ref: pse-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - microchip,pd69200
+      - microchip,pd69210
+      - microchip,pd69220
+
+  reg:
+    maxItems: 1
+
+  managers:
+    type: object
+    additionalProperties: false
+    description:
+      List of the PD69208T4/PD69204T4/PD69208M PSE managers. Each manager
+      have 4 or 8 physical ports according to the chip version. No need to
+      specify the SPI chip select as it is automatically detected by the
+      PD692x0 PSE controller. The PSE managers have to be described from
+      the lowest chip select to the greatest one, which is the detection
+      behavior of the PD692x0 PSE controller. The PD692x0 support up to
+      12 PSE managers which can expose up to 96 physical ports. All
+      physical ports available on a manager have to be described in the
+      incremental order even if they are not used.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+    patternProperties:
+      "^manager@[0-9a-b]$":
+        type: object
+        additionalProperties: false
+        description:
+          PD69208T4/PD69204T4/PD69208M PSE manager exposing 4 or 8 physical
+          ports.
+
+        properties:
+          reg:
+            description:
+              Incremental index of the PSE manager starting from 0, ranging
+              from lowest to highest chip select, up to 11.
+            maxItems: 1
+
+          "#address-cells":
+            const: 1
+
+          "#size-cells":
+            const: 0
+
+        patternProperties:
+          '^port@[0-7]$':
+            type: object
+            additionalProperties: false
+
+            properties:
+              reg:
+                maxItems: 1
+
+            required:
+              - reg
+
+        required:
+          - reg
+          - "#address-cells"
+          - "#size-cells"
+
+required:
+  - compatible
+  - reg
+  - pse-pis
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ethernet-pse@3c {
+        compatible = "microchip,pd69200";
+        reg = <0x3c>;
+
+        managers {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          manager@0 {
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            phys0: port@0 {
+              reg = <0>;
+            };
+
+            phys1: port@1 {
+              reg = <1>;
+            };
+
+            phys2: port@2 {
+              reg = <2>;
+            };
+
+            phys3: port@3 {
+              reg = <3>;
+            };
+          };
+
+          manager@1 {
+            reg = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            phys4: port@0 {
+              reg = <0>;
+            };
+
+            phys5: port@1 {
+              reg = <1>;
+            };
+
+            phys6: port@2 {
+              reg = <2>;
+            };
+
+            phys7: port@3 {
+              reg = <3>;
+            };
+          };
+        };
+
+        pse-pis {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pse_pi0: pse-pi@0 {
+            reg = <0>;
+            #pse-cells = <0>;
+            pairset-names = "alternative-a", "alternative-b";
+            pairsets = <&phys0>, <&phys1>;
+            polarity-supported = "MDI", "S";
+            vpwr-supply = <&vpwr1>;
+          };
+          pse_pi1: pse-pi@1 {
+            reg = <1>;
+            #pse-cells = <0>;
+            pairset-names = "alternative-a";
+            pairsets = <&phys2>;
+            polarity-supported = "MDI";
+            vpwr-supply = <&vpwr2>;
+          };
+        };
+      };
+    };

diff --git a/Bindings/net/pse-pd/pse-controller.yaml b/Bindings/net/pse-pd/pse-controller.yaml
index 2d382fa..a12cda8 100644
--- a/Bindings/net/pse-pd/pse-controller.yaml
+++ b/Bindings/net/pse-pd/pse-controller.yaml

@@ -13,6 +13,7 @@
 
 maintainers:
   - Oleksij Rempel <o.rempel@pengutronix.de>
+  - Kory Maincent <kory.maincent@bootlin.com>
 
 properties:
   $nodename:
@@ -22,11 +23,105 @@
     description:
       Used to uniquely identify a PSE instance within an IC. Will be
       0 on PSE nodes with only a single output and at least 1 on nodes
-      controlling several outputs.
+      controlling several outputs which are not described in the pse-pis
+      subnode. This property is deprecated, please use pse-pis instead.
     enum: [0, 1]
 
-required:
-  - "#pse-cells"
+  pse-pis:
+    type: object
+    description:
+      Overview of the PSE PIs provided by the controller.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+    patternProperties:
+      "^pse-pi@[0-9a-f]+$":
+        type: object
+        description:
+          PSE PI for power delivery via pairsets, compliant with IEEE
+          802.3-2022, Section 145.2.4. Each pairset comprises a positive and
+          a negative VPSE pair, adhering to the pinout configurations
+          detailed in the standard.
+          See Documentation/networking/pse-pd/pse-pi.rst for details.
+
+        properties:
+          reg:
+            description:
+              Address describing the PSE PI index.
+            maxItems: 1
+
+          "#pse-cells":
+            const: 0
+
+          pairset-names:
+            $ref: /schemas/types.yaml#/definitions/string-array
+            description:
+              Names of the pairsets as per IEEE 802.3-2022, Section 145.2.4.
+              Each name should correspond to a phandle in the 'pairset'
+              property pointing to the power supply for that pairset.
+            minItems: 1
+            maxItems: 2
+            items:
+              enum:
+                - alternative-a
+                - alternative-b
+
+          pairsets:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+            description:
+              List of phandles, each pointing to the power supply for the
+              corresponding pairset named in 'pairset-names'. This property
+              aligns with IEEE 802.3-2022, Section 33.2.3 and 145.2.4.
+              PSE Pinout Alternatives (as per IEEE 802.3-2022 Table 145\u20133)
+              |-----------|---------------|---------------|---------------|---------------|
+              | Conductor | Alternative A | Alternative A | Alternative B | Alternative B |
+              |           |    (MDI-X)    |     (MDI)     |      (X)      |      (S)      |
+              |-----------|---------------|---------------|---------------|---------------|
+              | 1         | Negative VPSE | Positive VPSE | -             | -             |
+              | 2         | Negative VPSE | Positive VPSE | -             | -             |
+              | 3         | Positive VPSE | Negative VPSE | -             | -             |
+              | 4         | -             | -             | Negative VPSE | Positive VPSE |
+              | 5         | -             | -             | Negative VPSE | Positive VPSE |
+              | 6         | Positive VPSE | Negative VPSE | -             | -             |
+              | 7         | -             | -             | Positive VPSE | Negative VPSE |
+              | 8         | -             | -             | Positive VPSE | Negative VPSE |
+            minItems: 1
+            maxItems: 2
+
+          polarity-supported:
+            $ref: /schemas/types.yaml#/definitions/string-array
+            description:
+              Polarity configuration supported by the PSE PI pairsets.
+            minItems: 1
+            maxItems: 4
+            items:
+              enum:
+                - MDI-X
+                - MDI
+                - X
+                - S
+
+          vpwr-supply:
+            description: Regulator power supply for the PSE PI.
+
+        required:
+          - reg
+          - "#pse-cells"
+
+oneOf:
+  - required:
+      - "#pse-cells"
+  - required:
+      - pse-pis
 
 additionalProperties: true
 

diff --git a/Bindings/net/pse-pd/ti,tps23881.yaml b/Bindings/net/pse-pd/ti,tps23881.yaml
new file mode 100644
index 0000000..6992d56
--- /dev/null
+++ b/Bindings/net/pse-pd/ti,tps23881.yaml

@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pse-pd/ti,tps23881.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS23881 Power Sourcing Equipment controller
+
+maintainers:
+  - Kory Maincent <kory.maincent@bootlin.com>
+
+allOf:
+  - $ref: pse-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,tps23881
+
+  reg:
+    maxItems: 1
+
+  '#pse-cells':
+    const: 1
+
+  channels:
+    description: each set of 8 ports can be assigned to one physical
+      channels or two for PoE4. This parameter describes the configuration
+      of the ports conversion matrix that establishes relationship between
+      the logical ports and the physical channels.
+    type: object
+    additionalProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      '^channel@[0-7]$':
+        type: object
+        additionalProperties: false
+
+        properties:
+          reg:
+            maxItems: 1
+
+        required:
+          - reg
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ethernet-pse@20 {
+        compatible = "ti,tps23881";
+        reg = <0x20>;
+
+        channels {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          phys0: channel@0 {
+            reg = <0>;
+          };
+
+          phys1: channel@1 {
+            reg = <1>;
+          };
+
+          phys2: channel@2 {
+            reg = <2>;
+          };
+        };
+
+        pse-pis {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pse_pi0: pse-pi@0 {
+            reg = <0>;
+            #pse-cells = <0>;
+            pairset-names = "alternative-a", "alternative-b";
+            pairsets = <&phys0>, <&phys1>;
+            polarity-supported = "MDI", "S";
+            vpwr-supply = <&vpwr1>;
+          };
+
+          pse_pi1: pse-pi@1 {
+            reg = <1>;
+            #pse-cells = <0>;
+            pairset-names = "alternative-a";
+            pairsets = <&phys2>;
+            polarity-supported = "MDI";
+            vpwr-supply = <&vpwr2>;
+          };
+        };
+      };
+    };

diff --git a/Bindings/net/qcom,ethqos.yaml b/Bindings/net/qcom,ethqos.yaml
index 69a337c..6672327 100644
--- a/Bindings/net/qcom,ethqos.yaml
+++ b/Bindings/net/qcom,ethqos.yaml

@@ -61,6 +61,8 @@
   iommus:
     maxItems: 1
 
+  dma-coherent: true
+
   phys: true
 
   phy-names:

diff --git a/Bindings/net/qcom,ipq4019-mdio.yaml b/Bindings/net/qcom,ipq4019-mdio.yaml
index 0029e19..a94480e 100644
--- a/Bindings/net/qcom,ipq4019-mdio.yaml
+++ b/Bindings/net/qcom,ipq4019-mdio.yaml

@@ -20,6 +20,7 @@
           - enum:
               - qcom,ipq6018-mdio
               - qcom,ipq8074-mdio
+              - qcom,ipq9574-mdio
           - const: qcom,ipq4019-mdio
 
   "#address-cells":
@@ -76,6 +77,7 @@
               - qcom,ipq5018-mdio
               - qcom,ipq6018-mdio
               - qcom,ipq8074-mdio
+              - qcom,ipq9574-mdio
     then:
       required:
         - clocks

diff --git a/Bindings/net/renesas,etheravb.yaml b/Bindings/net/renesas,etheravb.yaml
index de7ba7f..21a92f1 100644
--- a/Bindings/net/renesas,etheravb.yaml
+++ b/Bindings/net/renesas,etheravb.yaml

@@ -88,10 +88,16 @@
   '#address-cells':
     description: Number of address cells for the MDIO bus.
     const: 1
+    deprecated: true
 
   '#size-cells':
     description: Number of size cells on the MDIO bus.
     const: 0
+    deprecated: true
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
 
   renesas,no-ether-link:
     type: boolean
@@ -110,9 +116,13 @@
   tx-internal-delay-ps:
     enum: [0, 2000]
 
+# In older bindings there where no mdio child-node to describe the MDIO bus
+# and the PHY. To not fail older bindings accept any node with an address. New
+# users should describe the PHY inside the mdio child-node.
 patternProperties:
   "@[0-9a-f]$":
     type: object
+    deprecated: true
 
 required:
   - compatible
@@ -123,8 +133,6 @@
   - resets
   - phy-mode
   - phy-handle
-  - '#address-cells'
-  - '#size-cells'
 
 allOf:
   - $ref: ethernet-controller.yaml#

diff --git a/Bindings/net/renesas,ethertsn.yaml b/Bindings/net/renesas,ethertsn.yaml
index ea35d19..b4680a1 100644
--- a/Bindings/net/renesas,ethertsn.yaml
+++ b/Bindings/net/renesas,ethertsn.yaml

@@ -71,16 +71,8 @@
     enum: [0, 2000]
     default: 0
 
-  '#address-cells':
-    const: 1
-
-  '#size-cells':
-    const: 0
-
-patternProperties:
-  "^ethernet-phy@[0-9a-f]$":
-    type: object
-    $ref: ethernet-phy.yaml#
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
     unevaluatedProperties: false
 
 required:
@@ -94,8 +86,7 @@
   - resets
   - phy-mode
   - phy-handle
-  - '#address-cells'
-  - '#size-cells'
+  - mdio
 
 additionalProperties: false
 
@@ -122,14 +113,18 @@
         tx-internal-delay-ps = <2000>;
         phy-handle = <&phy3>;
 
-        #address-cells = <1>;
-        #size-cells = <0>;
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
 
-        phy3: ethernet-phy@3 {
-            compatible = "ethernet-phy-ieee802.3-c45";
-            reg = <0>;
-            interrupt-parent = <&gpio4>;
-            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
             reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+            reset-post-delay-us = <4000>;
+
+            phy3: ethernet-phy@0 {
+                compatible = "ethernet-phy-ieee802.3-c45";
+                reg = <0>;
+                interrupt-parent = <&gpio4>;
+                interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+            };
         };
     };

diff --git a/Bindings/net/renesas,rzn1-gmac.yaml b/Bindings/net/renesas,rzn1-gmac.yaml
new file mode 100644
index 0000000..d9a8d58
--- /dev/null
+++ b/Bindings/net/renesas,rzn1-gmac.yaml

@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/renesas,rzn1-gmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas GMAC
+
+maintainers:
+  - Romain Gantois <romain.gantois@bootlin.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,r9a06g032-gmac
+          - renesas,rzn1-gmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-gmac
+      - const: renesas,rzn1-gmac
+      - const: snps,dwmac
+
+  pcs-handle:
+    description:
+      phandle pointing to a PCS sub-node compatible with
+      renesas,rzn1-miic.yaml#
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@44000000 {
+      compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
+      reg = <0x44000000 0x2000>;
+      interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+      clock-names = "stmmaceth";
+      clocks = <&sysctrl R9A06G032_HCLK_GMAC0>;
+      power-domains = <&sysctrl>;
+      snps,multicast-filter-bins = <256>;
+      snps,perfect-filter-entries = <128>;
+      tx-fifo-depth = <2048>;
+      rx-fifo-depth = <4096>;
+      pcs-handle = <&mii_conv1>;
+      phy-mode = "mii";
+    };
+
+...

diff --git a/Bindings/net/rockchip-dwmac.yaml b/Bindings/net/rockchip-dwmac.yaml
index 70bbc42..6bbe96e 100644
--- a/Bindings/net/rockchip-dwmac.yaml
+++ b/Bindings/net/rockchip-dwmac.yaml

@@ -137,8 +137,6 @@
         assigned-clock-parents = <&ext_gmac>;
 
         rockchip,grf = <&grf>;
-        phy-mode = "rgmii";
+        phy-mode = "rgmii-id";
         clock_in_out = "input";
-        tx_delay = <0x30>;
-        rx_delay = <0x10>;
     };

diff --git a/Bindings/net/sff,sfp.yaml b/Bindings/net/sff,sfp.yaml
index bf6cbc7..90611b5 100644
--- a/Bindings/net/sff,sfp.yaml
+++ b/Bindings/net/sff,sfp.yaml

@@ -29,39 +29,39 @@
       allowable by a module in the slot, in milli-Watts. Presently, modules can
       be up to 1W, 1.5W or 2W.
 
-  "mod-def0-gpios":
+  mod-def0-gpios:
     maxItems: 1
     description:
       GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS) module
       presence input gpio signal, active (module absent) high. Must not be
       present for SFF modules
 
-  "los-gpios":
+  los-gpios:
     maxItems: 1
     description:
       GPIO phandle and a specifier of the Receiver Loss of Signal Indication
       input gpio signal, active (signal lost) high
 
-  "tx-fault-gpios":
+  tx-fault-gpios:
     maxItems: 1
     description:
       GPIO phandle and a specifier of the Module Transmitter Fault input gpio
       signal, active (fault condition) high
 
-  "tx-disable-gpios":
+  tx-disable-gpios:
     maxItems: 1
     description:
       GPIO phandle and a specifier of the Transmitter Disable output gpio
       signal, active (Tx disable) high
 
-  "rate-select0-gpios":
+  rate-select0-gpios:
     maxItems: 1
     description:
       GPIO phandle and a specifier of the Rx Signaling Rate Select (AKA RS0)
       output gpio signal, low - low Rx rate, high - high Rx rate Must not be
       present for SFF modules
 
-  "rate-select1-gpios":
+  rate-select1-gpios:
     maxItems: 1
     description:
       GPIO phandle and a specifier of the Tx Signaling Rate Select (AKA RS1)

diff --git a/Bindings/net/snps,dwmac.yaml b/Bindings/net/snps,dwmac.yaml
index 6b0341a..21cc27e 100644
--- a/Bindings/net/snps,dwmac.yaml
+++ b/Bindings/net/snps,dwmac.yaml

@@ -242,7 +242,8 @@
             type: boolean
             description: Multicast & Broadcast Packets
           snps,priority:
-            $ref: /schemas/types.yaml#/definitions/uint32
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            maxItems: 1
             description: Bitmask of the tagged frames priorities assigned to the queue
         allOf:
           - if:
@@ -327,9 +328,6 @@
       snps,tx-sched-dwrr:
         type: boolean
         description: Deficit Weighted Round Robin
-      snps,tx-sched-sp:
-        type: boolean
-        description: Strict priority
     allOf:
       - if:
           required:
@@ -338,7 +336,6 @@
           properties:
             snps,tx-sched-wfq: false
             snps,tx-sched-dwrr: false
-            snps,tx-sched-sp: false
       - if:
           required:
             - snps,tx-sched-wfq
@@ -346,7 +343,6 @@
           properties:
             snps,tx-sched-wrr: false
             snps,tx-sched-dwrr: false
-            snps,tx-sched-sp: false
       - if:
           required:
             - snps,tx-sched-dwrr
@@ -354,15 +350,6 @@
           properties:
             snps,tx-sched-wrr: false
             snps,tx-sched-wfq: false
-            snps,tx-sched-sp: false
-      - if:
-          required:
-            - snps,tx-sched-sp
-        then:
-          properties:
-            snps,tx-sched-wrr: false
-            snps,tx-sched-wfq: false
-            snps,tx-sched-dwrr: false
     patternProperties:
       "^queue[0-9]$":
         description: Each subnode represents a queue.
@@ -393,7 +380,8 @@
             $ref: /schemas/types.yaml#/definitions/uint32
             description: max read outstanding req. limit
           snps,priority:
-            $ref: /schemas/types.yaml#/definitions/uint32
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            maxItems: 1
             description:
               Bitmask of the tagged frames priorities assigned to the queue.
               When a PFC frame is received with priorities matching the bitmask,

diff --git a/Bindings/net/starfive,jh7110-dwmac.yaml b/Bindings/net/starfive,jh7110-dwmac.yaml
index 0d19629..313a153 100644
--- a/Bindings/net/starfive,jh7110-dwmac.yaml
+++ b/Bindings/net/starfive,jh7110-dwmac.yaml

@@ -30,6 +30,10 @@
       - items:
           - const: starfive,jh7110-dwmac
           - const: snps,dwmac-5.20
+      - items:
+          - const: starfive,jh8100-dwmac
+          - const: starfive,jh7110-dwmac
+          - const: snps,dwmac-5.20
 
   reg:
     maxItems: 1
@@ -116,11 +120,25 @@
           minItems: 3
           maxItems: 3
 
-        resets:
-          minItems: 2
+      if:
+        properties:
+          compatible:
+            contains:
+              const: starfive,jh8100-dwmac
+      then:
+        properties:
+          resets:
+            maxItems: 1
 
-        reset-names:
-          minItems: 2
+          reset-names:
+            const: stmmaceth
+      else:
+        properties:
+          resets:
+            minItems: 2
+
+          reset-names:
+            minItems: 2
 
 unevaluatedProperties: false
 

diff --git a/Bindings/net/stm32-dwmac.yaml b/Bindings/net/stm32-dwmac.yaml
index fc8c96b..7ccf756 100644
--- a/Bindings/net/stm32-dwmac.yaml
+++ b/Bindings/net/stm32-dwmac.yaml

@@ -82,6 +82,13 @@
       Should be phandle/offset pair. The phandle to the syscon node which
       encompases the glue register, and the offset of the control register
 
+  st,ext-phyclk:
+    description:
+      set this property in RMII mode when you have PHY without crystal 50MHz and want to
+      select RCC clock instead of ETH_REF_CLK. OR in RGMII mode when you want to select
+      RCC clock instead of ETH_CLK125.
+    type: boolean
+
   st,eth-clk-sel:
     description:
       set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
@@ -93,6 +100,10 @@
       select RCC clock instead of ETH_REF_CLK.
     type: boolean
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - clocks

diff --git a/Bindings/net/ti,cpsw-switch.yaml b/Bindings/net/ti,cpsw-switch.yaml
index d5bd93e..d14ca81 100644
--- a/Bindings/net/ti,cpsw-switch.yaml
+++ b/Bindings/net/ti,cpsw-switch.yaml

@@ -8,7 +8,6 @@
 
 maintainers:
   - Siddharth Vadapalli <s-vadapalli@ti.com>
-  - Ravi Gunasekaran <r-gunasekaran@ti.com>
   - Roger Quadros <rogerq@kernel.org>
 
 description:

diff --git a/Bindings/net/ti,icssg-prueth.yaml b/Bindings/net/ti,icssg-prueth.yaml
index 229c8f3..e253fa7 100644
--- a/Bindings/net/ti,icssg-prueth.yaml
+++ b/Bindings/net/ti,icssg-prueth.yaml

@@ -13,14 +13,12 @@
   Ethernet based on the Programmable Real-Time Unit and Industrial
   Communication Subsystem.
 
-allOf:
-  - $ref: /schemas/remoteproc/ti,pru-consumer.yaml#
-
 properties:
   compatible:
     enum:
-      - ti,am642-icssg-prueth  # for AM64x SoC family
-      - ti,am654-icssg-prueth  # for AM65x SoC family
+      - ti,am642-icssg-prueth      # for AM64x SoC family
+      - ti,am654-icssg-prueth      # for AM65x SoC family
+      - ti,am654-sr1-icssg-prueth  # for AM65x SoC family, SR1.0
 
   sram:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -28,9 +26,11 @@
       phandle to MSMC SRAM node
 
   dmas:
-    maxItems: 10
+    minItems: 10
+    maxItems: 12
 
   dma-names:
+    minItems: 10
     items:
       - const: tx0-0
       - const: tx0-1
@@ -42,6 +42,8 @@
       - const: tx1-3
       - const: rx0
       - const: rx1
+      - const: rxmgm0
+      - const: rxmgm1
 
   ti,mii-g-rt:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -132,6 +134,27 @@
   - interrupts
   - interrupt-names
 
+allOf:
+  - $ref: /schemas/remoteproc/ti,pru-consumer.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am654-sr1-icssg-prueth
+    then:
+      properties:
+        dmas:
+          minItems: 12
+        dma-names:
+          minItems: 12
+    else:
+      properties:
+        dmas:
+          maxItems: 10
+        dma-names:
+          maxItems: 10
+
 unevaluatedProperties: false
 
 examples:

diff --git a/Bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Bindings/net/ti,k3-am654-cpsw-nuss.yaml
index 73ed595..02b6d32 100644
--- a/Bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ b/Bindings/net/ti,k3-am654-cpsw-nuss.yaml

@@ -8,7 +8,6 @@
 
 maintainers:
   - Siddharth Vadapalli <s-vadapalli@ti.com>
-  - Ravi Gunasekaran <r-gunasekaran@ti.com>
   - Roger Quadros <rogerq@kernel.org>
 
 description:

diff --git a/Bindings/net/ti,k3-am654-cpts.yaml b/Bindings/net/ti,k3-am654-cpts.yaml
index b1c8753..3888692 100644
--- a/Bindings/net/ti,k3-am654-cpts.yaml
+++ b/Bindings/net/ti,k3-am654-cpts.yaml

@@ -8,7 +8,6 @@
 
 maintainers:
   - Siddharth Vadapalli <s-vadapalli@ti.com>
-  - Ravi Gunasekaran <r-gunasekaran@ti.com>
   - Roger Quadros <rogerq@kernel.org>
 
 description: |+

diff --git a/Bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Bindings/net/wireless/brcm,bcm4329-fmac.yaml
index 4aa521f..e564f20 100644
--- a/Bindings/net/wireless/brcm,bcm4329-fmac.yaml
+++ b/Bindings/net/wireless/brcm,bcm4329-fmac.yaml

@@ -44,6 +44,7 @@
               - brcm,bcm4366-fmac
               - cypress,cyw4373-fmac
               - cypress,cyw43012-fmac
+              - infineon,cyw43439-fmac
           - const: brcm,bcm4329-fmac
       - enum:
           - brcm,bcm4329-fmac

diff --git a/Bindings/net/wireless/qcom,ath10k.yaml b/Bindings/net/wireless/qcom,ath10k.yaml
index 9b3ef4b..5c4498b 100644
--- a/Bindings/net/wireless/qcom,ath10k.yaml
+++ b/Bindings/net/wireless/qcom,ath10k.yaml

@@ -73,6 +73,12 @@
       - sky85703-11
       - sky85803
 
+  firmware-name:
+    maxItems: 1
+    description:
+      If present, a board or platform specific string used to lookup firmware
+      files for the device.
+
   wifi-firmware:
     type: object
     additionalProperties: false

diff --git a/Bindings/net/wireless/qcom,ath11k.yaml b/Bindings/net/wireless/qcom,ath11k.yaml
index 672282c..a2d55bf 100644
--- a/Bindings/net/wireless/qcom,ath11k.yaml
+++ b/Bindings/net/wireless/qcom,ath11k.yaml

@@ -59,6 +59,8 @@
     minItems: 1
     maxItems: 2
 
+  ieee80211-freq-limit: true
+
   wifi-firmware:
     type: object
     description: |
@@ -88,6 +90,7 @@
 additionalProperties: false
 
 allOf:
+  - $ref: ieee80211.yaml#
   - if:
       properties:
         compatible:

diff --git a/Bindings/nvmem/qcom,qfprom.yaml b/Bindings/nvmem/qcom,qfprom.yaml
index 8c8f05d..80845c7 100644
--- a/Bindings/nvmem/qcom,qfprom.yaml
+++ b/Bindings/nvmem/qcom,qfprom.yaml

@@ -34,6 +34,7 @@
           - qcom,qcs404-qfprom
           - qcom,sc7180-qfprom
           - qcom,sc7280-qfprom
+          - qcom,sc8280xp-qfprom
           - qcom,sdm630-qfprom
           - qcom,sdm670-qfprom
           - qcom,sdm845-qfprom
@@ -42,6 +43,9 @@
           - qcom,sm6375-qfprom
           - qcom,sm8150-qfprom
           - qcom,sm8250-qfprom
+          - qcom,sm8450-qfprom
+          - qcom,sm8550-qfprom
+          - qcom,sm8650-qfprom
       - const: qcom,qfprom
 
   reg:

diff --git a/Bindings/nvmem/qcom,spmi-sdam.yaml b/Bindings/nvmem/qcom,spmi-sdam.yaml
index 068bedf..5d7be0b 100644
--- a/Bindings/nvmem/qcom,spmi-sdam.yaml
+++ b/Bindings/nvmem/qcom,spmi-sdam.yaml

@@ -7,7 +7,7 @@
 title: Qualcomm Technologies, Inc. SPMI SDAM
 
 maintainers:
-  - Shyam Kumar Thella <sthella@codeaurora.org>
+  - David Collins <quic_collinsd@quicinc.com>
 
 description: |
   The SDAM provides scratch register space for the PMIC clients. This

diff --git a/Bindings/opp/allwinner,sun50i-h6-operating-points.yaml b/Bindings/opp/allwinner,sun50i-h6-operating-points.yaml
index 51f62c3..ec5e424 100644
--- a/Bindings/opp/allwinner,sun50i-h6-operating-points.yaml
+++ b/Bindings/opp/allwinner,sun50i-h6-operating-points.yaml

@@ -13,25 +13,25 @@
 description: |
   For some SoCs, the CPU frequency subset and voltage value of each
   OPP varies based on the silicon variant in use. Allwinner Process
-  Voltage Scaling Tables defines the voltage and frequency value based
-  on the speedbin blown in the efuse combination. The
-  sun50i-cpufreq-nvmem driver reads the efuse value from the SoC to
-  provide the OPP framework with required information.
+  Voltage Scaling Tables define the voltage and frequency values based
+  on the speedbin blown in the efuse combination.
 
 allOf:
   - $ref: opp-v2-base.yaml#
 
 properties:
   compatible:
-    const: allwinner,sun50i-h6-operating-points
+    enum:
+      - allwinner,sun50i-h6-operating-points
+      - allwinner,sun50i-h616-operating-points
 
   nvmem-cells:
     description: |
       A phandle pointing to a nvmem-cells node representing the efuse
-      registers that has information about the speedbin that is used
+      register that has information about the speedbin that is used
       to select the right frequency/voltage value pair. Please refer
-      the for nvmem-cells bindings
-      Documentation/devicetree/bindings/nvmem/nvmem.txt and also
+      to the nvmem-cells bindings in
+      Documentation/devicetree/bindings/nvmem/nvmem.yaml and also the
       examples below.
 
   opp-shared: true
@@ -47,15 +47,18 @@
     properties:
       opp-hz: true
       clock-latency-ns: true
+      opp-microvolt: true
+      opp-supported-hw:
+        maxItems: 1
+        description:
+          A single 32 bit bitmap value, representing compatible HW, one
+          bit per speed bin index.
 
     patternProperties:
       "^opp-microvolt-speed[0-9]$": true
 
     required:
       - opp-hz
-      - opp-microvolt-speed0
-      - opp-microvolt-speed1
-      - opp-microvolt-speed2
 
     unevaluatedProperties: false
 
@@ -77,58 +80,54 @@
             opp-microvolt-speed2 = <800000>;
         };
 
-        opp-720000000 {
+        opp-1080000000 {
             clock-latency-ns = <244144>; /* 8 32k periods */
-            opp-hz = /bits/ 64 <720000000>;
+            opp-hz = /bits/ 64 <1080000000>;
 
-            opp-microvolt-speed0 = <880000>;
-            opp-microvolt-speed1 = <820000>;
-            opp-microvolt-speed2 = <800000>;
+            opp-microvolt-speed0 = <1060000>;
+            opp-microvolt-speed1 = <880000>;
+            opp-microvolt-speed2 = <840000>;
         };
 
-        opp-816000000 {
+        opp-1488000000 {
             clock-latency-ns = <244144>; /* 8 32k periods */
-            opp-hz = /bits/ 64 <816000000>;
+            opp-hz = /bits/ 64 <1488000000>;
 
-            opp-microvolt-speed0 = <880000>;
-            opp-microvolt-speed1 = <820000>;
-            opp-microvolt-speed2 = <800000>;
+            opp-microvolt-speed0 = <1160000>;
+            opp-microvolt-speed1 = <1000000>;
+            opp-microvolt-speed2 = <960000>;
         };
-
-        opp-888000000 {
-            clock-latency-ns = <244144>; /* 8 32k periods */
-            opp-hz = /bits/ 64 <888000000>;
+    };
 
-            opp-microvolt-speed0 = <940000>;
-            opp-microvolt-speed1 = <820000>;
-            opp-microvolt-speed2 = <800000>;
-        };
+  - |
+    opp-table {
+        compatible = "allwinner,sun50i-h616-operating-points";
+        nvmem-cells = <&speedbin_efuse>;
+        opp-shared;
 
-        opp-1080000000 {
+        opp-480000000 {
             clock-latency-ns = <244144>; /* 8 32k periods */
-            opp-hz = /bits/ 64 <1080000000>;
+            opp-hz = /bits/ 64 <480000000>;
 
-            opp-microvolt-speed0 = <1060000>;
-            opp-microvolt-speed1 = <880000>;
-            opp-microvolt-speed2 = <840000>;
+            opp-microvolt = <900000>;
+            opp-supported-hw = <0x1f>;
         };
 
-        opp-1320000000 {
+        opp-792000000 {
             clock-latency-ns = <244144>; /* 8 32k periods */
-            opp-hz = /bits/ 64 <1320000000>;
+            opp-hz = /bits/ 64 <792000000>;
 
-            opp-microvolt-speed0 = <1160000>;
-            opp-microvolt-speed1 = <940000>;
-            opp-microvolt-speed2 = <900000>;
+            opp-microvolt-speed1 = <900000>;
+            opp-microvolt-speed4 = <940000>;
+            opp-supported-hw = <0x12>;
         };
 
-        opp-1488000000 {
+        opp-1512000000 {
             clock-latency-ns = <244144>; /* 8 32k periods */
-            opp-hz = /bits/ 64 <1488000000>;
+            opp-hz = /bits/ 64 <1512000000>;
 
-            opp-microvolt-speed0 = <1160000>;
-            opp-microvolt-speed1 = <1000000>;
-            opp-microvolt-speed2 = <960000>;
+            opp-microvolt = <1100000>;
+            opp-supported-hw = <0x0a>;
         };
     };
 

diff --git a/Bindings/pci/amlogic,axg-pcie.yaml b/Bindings/pci/amlogic,axg-pcie.yaml
index a5bd90b..79a21ba 100644
--- a/Bindings/pci/amlogic,axg-pcie.yaml
+++ b/Bindings/pci/amlogic,axg-pcie.yaml

@@ -13,7 +13,7 @@
   Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core.
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
   - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
 
 # We need a select here so we don't match all nodes with 'snps,dw-pcie'

diff --git a/Bindings/pci/apple,pcie.yaml b/Bindings/pci/apple,pcie.yaml
index 215ff9a..c8775f9 100644
--- a/Bindings/pci/apple,pcie.yaml
+++ b/Bindings/pci/apple,pcie.yaml

@@ -85,7 +85,7 @@
 unevaluatedProperties: false
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
   - $ref: /schemas/interrupt-controller/msi-controller.yaml#
   - if:
       properties:

diff --git a/Bindings/pci/brcm,iproc-pcie.yaml b/Bindings/pci/brcm,iproc-pcie.yaml
index 0e07ab6..5434c14 100644
--- a/Bindings/pci/brcm,iproc-pcie.yaml
+++ b/Bindings/pci/brcm,iproc-pcie.yaml

@@ -11,7 +11,7 @@
   - Scott Branden <scott.branden@broadcom.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:

diff --git a/Bindings/pci/brcm,stb-pcie.yaml b/Bindings/pci/brcm,stb-pcie.yaml
index 22491f7..11f8ea3 100644
--- a/Bindings/pci/brcm,stb-pcie.yaml
+++ b/Bindings/pci/brcm,stb-pcie.yaml

@@ -108,7 +108,7 @@
   - msi-controller
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
   - $ref: /schemas/interrupt-controller/msi-controller.yaml#
   - if:
       properties:

diff --git a/Bindings/pci/cdns,cdns-pcie-host.yaml b/Bindings/pci/cdns,cdns-pcie-host.yaml
index bc3c48f..a8190d9 100644
--- a/Bindings/pci/cdns,cdns-pcie-host.yaml
+++ b/Bindings/pci/cdns,cdns-pcie-host.yaml

@@ -10,7 +10,6 @@
   - Tom Joseph <tjoseph@cadence.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
   - $ref: cdns-pcie-host.yaml#
 
 properties:
@@ -25,8 +24,6 @@
       - const: reg
       - const: cfg
 
-  msi-parent: true
-
 required:
   - reg
   - reg-names

diff --git a/Bindings/pci/cdns-pcie-host.yaml b/Bindings/pci/cdns-pcie-host.yaml
index a6b4944..f4eb82e 100644
--- a/Bindings/pci/cdns-pcie-host.yaml
+++ b/Bindings/pci/cdns-pcie-host.yaml

@@ -10,7 +10,7 @@
   - Tom Joseph <tjoseph@cadence.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
   - $ref: cdns-pcie.yaml#
 
 properties:

diff --git a/Bindings/pci/faraday,ftpci100.yaml b/Bindings/pci/faraday,ftpci100.yaml
index 92efbf0..378dd1c 100644
--- a/Bindings/pci/faraday,ftpci100.yaml
+++ b/Bindings/pci/faraday,ftpci100.yaml

@@ -51,7 +51,7 @@
         <0x6000 0 0 4 &pci_intc 2>;
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:

diff --git a/Bindings/pci/fsl,layerscape-pcie-ep.yaml b/Bindings/pci/fsl,layerscape-pcie-ep.yaml
new file mode 100644
index 0000000..399efa7
--- /dev/null
+++ b/Bindings/pci/fsl,layerscape-pcie-ep.yaml

@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape PCIe Endpoint(EP) controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  This PCIe EP controller is based on the Synopsys DesignWare PCIe IP.
+
+  This controller derives its clocks from the Reset Configuration Word (RCW)
+  which is used to describe the PLL settings at the time of chip-reset.
+
+  Also as per the available Reference Manuals, there is no specific 'version'
+  register available in the Freescale PCIe controller register set,
+  which can allow determining the underlying DesignWare PCIe controller version
+  information.
+
+properties:
+  compatible:
+    enum:
+      - fsl,ls2088a-pcie-ep
+      - fsl,ls1088a-pcie-ep
+      - fsl,ls1046a-pcie-ep
+      - fsl,ls1028a-pcie-ep
+      - fsl,lx2160ar2-pcie-ep
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: regs
+      - const: addr_space
+
+  fsl,pcie-scfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle to the SCFG device node. The second entry is the
+      physical PCIe controller index starting from '0'. This is used to get
+      SCFG PEXN registers.
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: If the PEX_LUT and PF register block is in big-endian, specify
+      this property.
+
+  dma-coherent: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,ls1028a-pcie-ep
+            - fsl,ls1046a-pcie-ep
+            - fsl,ls1088a-pcie-ep
+    then:
+      properties:
+        interrupt-names:
+          items:
+            - const: pme
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pcie_ep1: pcie-ep@3400000 {
+        compatible = "fsl,ls1028a-pcie-ep";
+        reg = <0x00 0x03400000 0x0 0x00100000
+              0x80 0x00000000 0x8 0x00000000>;
+        reg-names = "regs", "addr_space";
+        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+        interrupt-names = "pme";
+        num-ib-windows = <6>;
+        num-ob-windows = <8>;
+        status = "disabled";
+      };
+    };
+...

diff --git a/Bindings/pci/fsl,layerscape-pcie.yaml b/Bindings/pci/fsl,layerscape-pcie.yaml
new file mode 100644
index 0000000..793986c
--- /dev/null
+++ b/Bindings/pci/fsl,layerscape-pcie.yaml

@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape PCIe Root Complex(RC) controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  This PCIe RC controller is based on the Synopsys DesignWare PCIe IP
+
+  This controller derives its clocks from the Reset Configuration Word (RCW)
+  which is used to describe the PLL settings at the time of chip-reset.
+
+  Also as per the available Reference Manuals, there is no specific 'version'
+  register available in the Freescale PCIe controller register set,
+  which can allow determining the underlying DesignWare PCIe controller version
+  information.
+
+properties:
+  compatible:
+    enum:
+      - fsl,ls1021a-pcie
+      - fsl,ls2080a-pcie
+      - fsl,ls2085a-pcie
+      - fsl,ls2088a-pcie
+      - fsl,ls1088a-pcie
+      - fsl,ls1046a-pcie
+      - fsl,ls1043a-pcie
+      - fsl,ls1012a-pcie
+      - fsl,ls1028a-pcie
+      - fsl,lx2160a-pcie
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: regs
+      - const: config
+
+  fsl,pcie-scfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle to the SCFG device node. The second entry is the
+      physical PCIe controller index starting from '0'. This is used to get
+      SCFG PEXN registers.
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: If the PEX_LUT and PF register block is in big-endian, specify
+      this property.
+
+  dma-coherent: true
+
+  msi-parent: true
+
+  iommu-map: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#address-cells"
+  - "#size-cells"
+  - device_type
+  - bus-range
+  - ranges
+  - interrupts
+  - interrupt-names
+  - "#interrupt-cells"
+  - interrupt-map-mask
+  - interrupt-map
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,ls1028a-pcie
+            - fsl,ls1046a-pcie
+            - fsl,ls1043a-pcie
+            - fsl,ls1012a-pcie
+    then:
+      properties:
+        interrupts:
+          maxItems: 2
+        interrupt-names:
+          items:
+            - const: pme
+            - const: aer
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,ls2080a-pcie
+            - fsl,ls2085a-pcie
+            - fsl,ls2088a-pcie
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: intr
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,ls1088a-pcie
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: aer
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pcie@3400000 {
+        compatible = "fsl,ls1088a-pcie";
+        reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+            <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+        reg-names = "regs", "config";
+        interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+        interrupt-names = "aer";
+        #address-cells = <3>;
+        #size-cells = <2>;
+        dma-coherent;
+        device_type = "pci";
+        bus-range = <0x0 0xff>;
+        ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
+                 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+        msi-parent = <&its>;
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0 0 0 7>;
+        interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
+                        <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
+                        <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
+                        <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
+        iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+      };
+    };
+...

diff --git a/Bindings/pci/host-generic-pci.yaml b/Bindings/pci/host-generic-pci.yaml
index d25423a..3484e0b 100644
--- a/Bindings/pci/host-generic-pci.yaml
+++ b/Bindings/pci/host-generic-pci.yaml

@@ -116,7 +116,7 @@
   - ranges
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
   - if:
       properties:
         compatible:

diff --git a/Bindings/pci/intel,ixp4xx-pci.yaml b/Bindings/pci/intel,ixp4xx-pci.yaml
index debfb54..3cae2e0 100644
--- a/Bindings/pci/intel,ixp4xx-pci.yaml
+++ b/Bindings/pci/intel,ixp4xx-pci.yaml

@@ -12,7 +12,7 @@
 description: PCI host controller found in the Intel IXP4xx SoC series.
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:

diff --git a/Bindings/pci/intel,keembay-pcie.yaml b/Bindings/pci/intel,keembay-pcie.yaml
index 505acc4..1fd5575 100644
--- a/Bindings/pci/intel,keembay-pcie.yaml
+++ b/Bindings/pci/intel,keembay-pcie.yaml

@@ -11,7 +11,7 @@
   - Srikanth Thokala <srikanth.thokala@intel.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:

diff --git a/Bindings/pci/layerscape-pci.txt b/Bindings/pci/layerscape-pci.txt
deleted file mode 100644
index ee8a479..0000000
--- a/Bindings/pci/layerscape-pci.txt
+++ /dev/null

@@ -1,79 +0,0 @@
-Freescale Layerscape PCIe controller
-
-This PCIe host controller is based on the Synopsys DesignWare PCIe IP
-and thus inherits all the common properties defined in snps,dw-pcie.yaml.
-
-This controller derives its clocks from the Reset Configuration Word (RCW)
-which is used to describe the PLL settings at the time of chip-reset.
-
-Also as per the available Reference Manuals, there is no specific 'version'
-register available in the Freescale PCIe controller register set,
-which can allow determining the underlying DesignWare PCIe controller version
-information.
-
-Required properties:
-- compatible: should contain the platform identifier such as:
-  RC mode:
-        "fsl,ls1021a-pcie"
-        "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"
-        "fsl,ls2088a-pcie"
-        "fsl,ls1088a-pcie"
-        "fsl,ls1046a-pcie"
-        "fsl,ls1043a-pcie"
-        "fsl,ls1012a-pcie"
-        "fsl,ls1028a-pcie"
-  EP mode:
-	"fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep"
-	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
-	"fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"
-	"fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep"
-	"fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep"
-- reg: base addresses and lengths of the PCIe controller register blocks.
-- interrupts: A list of interrupt outputs of the controller. Must contain an
-  entry for each entry in the interrupt-names property.
-- interrupt-names: It could include the following entries:
-  "aer": Used for interrupt line which reports AER events when
-	 non MSI/MSI-X/INTx mode is used
-  "pme": Used for interrupt line which reports PME events when
-	 non MSI/MSI-X/INTx mode is used
-  "intr": Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a)
-	  which has a single interrupt line for miscellaneous controller
-	  events(could include AER and PME events).
-- fsl,pcie-scfg: Must include two entries.
-  The first entry must be a link to the SCFG device node
-  The second entry is the physical PCIe controller index starting from '0'.
-  This is used to get SCFG PEXN registers
-- dma-coherent: Indicates that the hardware IP block can ensure the coherency
-  of the data transferred from/to the IP block. This can avoid the software
-  cache flush/invalid actions, and improve the performance significantly.
-
-Optional properties:
-- big-endian: If the PEX_LUT and PF register block is in big-endian, specify
-  this property.
-
-Example:
-
-        pcie@3400000 {
-                compatible = "fsl,ls1088a-pcie";
-                reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
-                      <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
-                reg-names = "regs", "config";
-                interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
-                interrupt-names = "aer";
-                #address-cells = <3>;
-                #size-cells = <2>;
-                device_type = "pci";
-                dma-coherent;
-                num-viewport = <256>;
-                bus-range = <0x0 0xff>;
-                ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
-                          0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-                msi-parent = <&its>;
-                #interrupt-cells = <1>;
-                interrupt-map-mask = <0 0 0 7>;
-                interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
-                                <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
-                                <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
-                                <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
-                iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
-        };

diff --git a/Bindings/pci/loongson.yaml b/Bindings/pci/loongson.yaml
index a8324a9..1988465 100644
--- a/Bindings/pci/loongson.yaml
+++ b/Bindings/pci/loongson.yaml

@@ -13,7 +13,7 @@
   PCI host controller found on Loongson PCHs and SoCs.
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:

diff --git a/Bindings/pci/mediatek,mt7621-pcie.yaml b/Bindings/pci/mediatek,mt7621-pcie.yaml
index e63e645..6fba421 100644
--- a/Bindings/pci/mediatek,mt7621-pcie.yaml
+++ b/Bindings/pci/mediatek,mt7621-pcie.yaml

@@ -14,7 +14,7 @@
   with 3 Root Ports. Each Root Port supports a Gen1 1-lane Link
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:
@@ -33,9 +33,12 @@
 patternProperties:
   '^pcie@[0-2],0$':
     type: object
-    $ref: /schemas/pci/pci-bus.yaml#
+    $ref: /schemas/pci/pci-pci-bridge.yaml#
 
     properties:
+      reg:
+        maxItems: 1
+
       resets:
         maxItems: 1
 

diff --git a/Bindings/pci/mediatek-pcie-gen3.yaml b/Bindings/pci/mediatek-pcie-gen3.yaml
index 7e8c7a2..76d7420 100644
--- a/Bindings/pci/mediatek-pcie-gen3.yaml
+++ b/Bindings/pci/mediatek-pcie-gen3.yaml

@@ -140,7 +140,7 @@
   - interrupt-controller
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
   - if:
       properties:
         compatible:

diff --git a/Bindings/pci/microchip,pcie-host.yaml b/Bindings/pci/microchip,pcie-host.yaml
index f7a3c26..5d7aec5 100644
--- a/Bindings/pci/microchip,pcie-host.yaml
+++ b/Bindings/pci/microchip,pcie-host.yaml

@@ -10,7 +10,7 @@
   - Daire McNamara <daire.mcnamara@microchip.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
   - $ref: /schemas/interrupt-controller/msi-controller.yaml#
 
 properties:
@@ -65,7 +65,8 @@
       - const: msi
 
   ranges:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
 
   dma-ranges:
     minItems: 1

diff --git a/Bindings/pci/qcom,pcie-common.yaml b/Bindings/pci/qcom,pcie-common.yaml
index 0d1b235..0a39bbf 100644
--- a/Bindings/pci/qcom,pcie-common.yaml
+++ b/Bindings/pci/qcom,pcie-common.yaml

@@ -95,6 +95,6 @@
       - msi-map
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 additionalProperties: true

diff --git a/Bindings/pci/qcom,pcie-sm8350.yaml b/Bindings/pci/qcom,pcie-sm8350.yaml
index 9eb6e45..2a4cc41 100644
--- a/Bindings/pci/qcom,pcie-sm8350.yaml
+++ b/Bindings/pci/qcom,pcie-sm8350.yaml

@@ -71,28 +71,6 @@
     items:
       - const: pci
 
-oneOf:
-  - properties:
-      interrupts:
-        maxItems: 1
-      interrupt-names:
-        items:
-          - const: msi
-
-  - properties:
-      interrupts:
-        minItems: 8
-      interrupt-names:
-        items:
-          - const: msi0
-          - const: msi1
-          - const: msi2
-          - const: msi3
-          - const: msi4
-          - const: msi5
-          - const: msi6
-          - const: msi7
-
 allOf:
   - $ref: qcom,pcie-common.yaml#
 

diff --git a/Bindings/pci/qcom,pcie.yaml b/Bindings/pci/qcom,pcie.yaml
index cf9a691..f867746 100644
--- a/Bindings/pci/qcom,pcie.yaml
+++ b/Bindings/pci/qcom,pcie.yaml

@@ -130,7 +130,7 @@
       - msi-map
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
   - if:
       properties:
         compatible:

diff --git a/Bindings/pci/rcar-gen4-pci-ep.yaml b/Bindings/pci/rcar-gen4-pci-ep.yaml
index fe38f62..91b81ac 100644
--- a/Bindings/pci/rcar-gen4-pci-ep.yaml
+++ b/Bindings/pci/rcar-gen4-pci-ep.yaml

@@ -16,7 +16,9 @@
 properties:
   compatible:
     items:
-      - const: renesas,r8a779f0-pcie-ep   # R-Car S4-8
+      - enum:
+          - renesas,r8a779f0-pcie-ep      # R-Car S4-8
+          - renesas,r8a779g0-pcie-ep      # R-Car V4H
       - const: renesas,rcar-gen4-pcie-ep  # R-Car Gen4
 
   reg:

diff --git a/Bindings/pci/rcar-gen4-pci-host.yaml b/Bindings/pci/rcar-gen4-pci-host.yaml
index ffb3433..955c664 100644
--- a/Bindings/pci/rcar-gen4-pci-host.yaml
+++ b/Bindings/pci/rcar-gen4-pci-host.yaml

@@ -16,7 +16,9 @@
 properties:
   compatible:
     items:
-      - const: renesas,r8a779f0-pcie   # R-Car S4-8
+      - enum:
+          - renesas,r8a779f0-pcie      # R-Car S4-8
+          - renesas,r8a779g0-pcie      # R-Car V4H
       - const: renesas,rcar-gen4-pcie  # R-Car Gen4
 
   reg:

diff --git a/Bindings/pci/rcar-pci-host.yaml b/Bindings/pci/rcar-pci-host.yaml
index b6a7cb3..666f013 100644
--- a/Bindings/pci/rcar-pci-host.yaml
+++ b/Bindings/pci/rcar-pci-host.yaml

@@ -12,7 +12,7 @@
   - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
 
 allOf:
-  - $ref: pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:
@@ -77,6 +77,9 @@
   vpcie12v-supply:
     description: The 12v regulator to use for PCIe.
 
+  iommu-map: true
+  iommu-map-mask: true
+
 required:
   - compatible
   - reg

diff --git a/Bindings/pci/renesas,pci-rcar-gen2.yaml b/Bindings/pci/renesas,pci-rcar-gen2.yaml
index 5a0d64d..b288cdb 100644
--- a/Bindings/pci/renesas,pci-rcar-gen2.yaml
+++ b/Bindings/pci/renesas,pci-rcar-gen2.yaml

@@ -110,7 +110,7 @@
   - "#interrupt-cells"
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
   - if:
       properties:

diff --git a/Bindings/pci/rockchip,rk3399-pcie.yaml b/Bindings/pci/rockchip,rk3399-pcie.yaml
index 531008f..720a5f9 100644
--- a/Bindings/pci/rockchip,rk3399-pcie.yaml
+++ b/Bindings/pci/rockchip,rk3399-pcie.yaml

@@ -10,7 +10,7 @@
   - Shawn Lin <shawn.lin@rock-chips.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
   - $ref: rockchip,rk3399-pcie-common.yaml#
 
 properties:
@@ -37,6 +37,7 @@
     description: This property is needed if using 24MHz OSC for RC's PHY.
 
   ep-gpios:
+    maxItems: 1
     description: pre-reset GPIO
 
   vpcie12v-supply:

diff --git a/Bindings/pci/snps,dw-pcie.yaml b/Bindings/pci/snps,dw-pcie.yaml
index 022055e..548f59d 100644
--- a/Bindings/pci/snps,dw-pcie.yaml
+++ b/Bindings/pci/snps,dw-pcie.yaml

@@ -23,7 +23,7 @@
     - compatible
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
   - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
   - if:
       not:

diff --git a/Bindings/pci/ti,am65-pci-host.yaml b/Bindings/pci/ti,am65-pci-host.yaml
index a20dccb..0a9d105 100644
--- a/Bindings/pci/ti,am65-pci-host.yaml
+++ b/Bindings/pci/ti,am65-pci-host.yaml

@@ -11,7 +11,7 @@
   - Kishon Vijay Abraham I <kishon@ti.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:
@@ -55,6 +55,20 @@
 
   dma-coherent: true
 
+  num-viewport:
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  phys:
+    description: per-lane PHYs
+    minItems: 1
+    maxItems: 2
+
+  phy-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      pattern: '^pcie-phy[0-1]$'
+
 required:
   - compatible
   - reg
@@ -74,6 +88,7 @@
     - dma-coherent
     - power-domains
     - msi-map
+    - num-viewport
 
 unevaluatedProperties: false
 
@@ -81,6 +96,7 @@
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/phy/phy.h>
     #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
     pcie0_rc: pcie@5500000 {
@@ -98,9 +114,13 @@
         ti,syscon-pcie-id = <&scm_conf 0x0210>;
         ti,syscon-pcie-mode = <&scm_conf 0x4060>;
         bus-range = <0x0 0xff>;
+        num-viewport = <16>;
         max-link-speed = <2>;
         dma-coherent;
         interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
         msi-map = <0x0 &gic_its 0x0 0x10000>;
         device_type = "pci";
+        num-lanes = <1>;
+        phys = <&serdes0 PHY_TYPE_PCIE 0>;
+        phy-names = "pcie-phy0";
     };

diff --git a/Bindings/pci/ti,j721e-pci-host.yaml b/Bindings/pci/ti,j721e-pci-host.yaml
index b7a534c..15a2658 100644
--- a/Bindings/pci/ti,j721e-pci-host.yaml
+++ b/Bindings/pci/ti,j721e-pci-host.yaml

@@ -23,6 +23,10 @@
         items:
           - const: ti,j7200-pcie-host
           - const: ti,j721e-pcie-host
+      - description: PCIe controller in J722S
+        items:
+          - const: ti,j722s-pcie-host
+          - const: ti,j721e-pcie-host
 
   reg:
     maxItems: 4
@@ -68,6 +72,7 @@
       - 0xb00d
       - 0xb00f
       - 0xb010
+      - 0xb012
       - 0xb013
 
   msi-map: true

diff --git a/Bindings/pci/versatile.yaml b/Bindings/pci/versatile.yaml
index 09748ef..294c7cd 100644
--- a/Bindings/pci/versatile.yaml
+++ b/Bindings/pci/versatile.yaml

@@ -13,7 +13,7 @@
   PCI host controller found on the ARM Versatile PB board's FPGA.
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:

diff --git a/Bindings/pci/xilinx-versal-cpm.yaml b/Bindings/pci/xilinx-versal-cpm.yaml
index 4734be4..4770ce0 100644
--- a/Bindings/pci/xilinx-versal-cpm.yaml
+++ b/Bindings/pci/xilinx-versal-cpm.yaml

@@ -10,7 +10,7 @@
   - Bharat Kumar Gogada <bharat.kumar.gogada@amd.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:
@@ -48,13 +48,16 @@
   interrupt-controller:
     description: Interrupt controller node for handling legacy PCI interrupts.
     type: object
+    additionalProperties: false
+
     properties:
       "#address-cells":
         const: 0
+
       "#interrupt-cells":
         const: 1
-      "interrupt-controller": true
-    additionalProperties: false
+
+      interrupt-controller: true
 
 required:
   - reg

diff --git a/Bindings/pci/xlnx,axi-pcie-host.yaml b/Bindings/pci/xlnx,axi-pcie-host.yaml
index 69b7dec..fb87b96 100644
--- a/Bindings/pci/xlnx,axi-pcie-host.yaml
+++ b/Bindings/pci/xlnx,axi-pcie-host.yaml

@@ -10,7 +10,7 @@
   - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:

diff --git a/Bindings/pci/xlnx,nwl-pcie.yaml b/Bindings/pci/xlnx,nwl-pcie.yaml
index 426f90a..9cad860 100644
--- a/Bindings/pci/xlnx,nwl-pcie.yaml
+++ b/Bindings/pci/xlnx,nwl-pcie.yaml

@@ -10,7 +10,7 @@
   - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
   - $ref: /schemas/interrupt-controller/msi-controller.yaml#
 
 properties:
@@ -84,7 +84,7 @@
       "#interrupt-cells":
         const: 1
 
-      "interrupt-controller": true
+      interrupt-controller: true
 
     required:
       - "#address-cells"

diff --git a/Bindings/pci/xlnx,xdma-host.yaml b/Bindings/pci/xlnx,xdma-host.yaml
index 0aa00b8..2f59b3a 100644
--- a/Bindings/pci/xlnx,xdma-host.yaml
+++ b/Bindings/pci/xlnx,xdma-host.yaml

@@ -10,7 +10,7 @@
   - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:

diff --git a/Bindings/phy/brcm,sata-phy.yaml b/Bindings/phy/brcm,sata-phy.yaml
index 8467c8e..439bda1 100644
--- a/Bindings/phy/brcm,sata-phy.yaml
+++ b/Bindings/phy/brcm,sata-phy.yaml

@@ -59,14 +59,14 @@
       "#phy-cells":
         const: 0
 
-      "brcm,enable-ssc":
+      brcm,enable-ssc:
         $ref: /schemas/types.yaml#/definitions/flag
         description: |
           Use spread spectrum clocking (SSC) on this port
           This property is not applicable for "brcm,iproc-ns2-sata-phy",
           "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy".
 
-      "brcm,rxaeq-mode":
+      brcm,rxaeq-mode:
         $ref: /schemas/types.yaml#/definitions/string
         description:
           String that indicates the desired RX equalizer mode.
@@ -75,7 +75,7 @@
           - auto
           - manual
 
-      "brcm,rxaeq-value":
+      brcm,rxaeq-value:
         $ref: /schemas/types.yaml#/definitions/uint32
         description: |
             When 'brcm,rxaeq-mode' is set to "manual", provides the RX
@@ -83,7 +83,7 @@
         minimum: 0
         maximum: 63
 
-      "brcm,tx-amplitude-millivolt":
+      brcm,tx-amplitude-millivolt:
         description: |
             Transmit amplitude voltage in millivolt.
         $ref: /schemas/types.yaml#/definitions/uint32

diff --git a/Bindings/phy/fsl,imx8mp-hdmi-phy.yaml b/Bindings/phy/fsl,imx8mp-hdmi-phy.yaml
new file mode 100644
index 0000000..c43e86a
--- /dev/null
+++ b/Bindings/phy/fsl,imx8mp-hdmi-phy.yaml

@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,imx8mp-hdmi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP HDMI PHY
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mp-hdmi-phy
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: apb
+      - const: ref
+
+  "#phy-cells":
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - "#phy-cells"
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    phy@32fdff00 {
+        compatible = "fsl,imx8mp-hdmi-phy";
+        reg = <0x32fdff00 0x100>;
+        clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+                 <&clk IMX8MP_CLK_HDMI_24M>;
+        clock-names = "apb", "ref";
+        power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX_PHY>;
+        #clock-cells = <0>;
+        #phy-cells = <0>;
+    };

diff --git a/Bindings/phy/mediatek,mt7988-xfi-tphy.yaml b/Bindings/phy/mediatek,mt7988-xfi-tphy.yaml
new file mode 100644
index 0000000..cfb3ca9
--- /dev/null
+++ b/Bindings/phy/mediatek,mt7988-xfi-tphy.yaml

@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,mt7988-xfi-tphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7988 XFI T-PHY
+
+maintainers:
+  - Daniel Golle <daniel@makrotopia.org>
+
+description:
+  The MediaTek XFI SerDes T-PHY provides the physical SerDes lanes
+  used by the (10G/5G) USXGMII PCS and (1G/2.5G) LynxI PCS found in
+  MediaTek's 10G-capabale MT7988 SoC.
+  In MediaTek's SDK sources, this unit is referred to as "pextp".
+
+properties:
+  compatible:
+    const: mediatek,mt7988-xfi-tphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XFI PHY clock
+      - description: XFI register clock
+
+  clock-names:
+    items:
+      - const: xfipll
+      - const: topxtal
+
+  resets:
+    items:
+      - description: Reset controller corresponding to the phy instance.
+
+  mediatek,usxgmii-performance-errata:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      One instance of the T-PHY on MT7988 suffers from a performance
+      problem in 10GBase-R mode which needs a work-around in the driver.
+      This flag enables a work-around ajusting an analog phy setting and
+      is required for XFI Port0 of the MT7988 SoC to be in compliance with
+      the SFP specification.
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mediatek,mt7988-clk.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      phy@11f20000 {
+        compatible = "mediatek,mt7988-xfi-tphy";
+        reg = <0 0x11f20000 0 0x10000>;
+        clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>,
+                 <&topckgen CLK_TOP_XFI_PHY_0_XTAL_SEL>;
+        clock-names = "xfipll", "topxtal";
+        resets = <&watchdog 14>;
+        mediatek,usxgmii-performance-errata;
+        #phy-cells = <0>;
+      };
+    };
+
+...

diff --git a/Bindings/phy/phy-rockchip-usbdp.yaml b/Bindings/phy/phy-rockchip-usbdp.yaml
new file mode 100644
index 0000000..1f1f886
--- /dev/null
+++ b/Bindings/phy/phy-rockchip-usbdp.yaml

@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-rockchip-usbdp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip USBDP Combo PHY with Samsung IP block
+
+maintainers:
+  - Frank Wang <frank.wang@rock-chips.com>
+  - Zhang Yubing <yubing.zhang@rock-chips.com>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3588-usbdp-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    description: |
+      Cell allows setting the type of the PHY. Possible values are:
+      - PHY_TYPE_USB3
+      - PHY_TYPE_DP
+    const: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: refclk
+      - const: immortal
+      - const: pclk
+      - const: utmi
+
+  resets:
+    maxItems: 5
+
+  reset-names:
+    items:
+      - const: init
+      - const: cmn
+      - const: lane
+      - const: pcs_apb
+      - const: pma_apb
+
+  rockchip,dp-lane-mux:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 4
+    items:
+      maximum: 3
+    description:
+      An array of physical Type-C lanes indexes. Position of an entry
+      determines the DisplayPort (DP) lane index, while the value of an entry
+      indicates physical Type-C lane. The supported DP lanes number are 2 or 4.
+      e.g. for 2 lanes DP lanes map, we could have "rockchip,dp-lane-mux = <2,
+      3>;", assuming DP lane0 on Type-C phy lane2, DP lane1 on Type-C phy
+      lane3. For 4 lanes DP lanes map, we could have "rockchip,dp-lane-mux =
+      <0, 1, 2, 3>;", assuming DP lane0 on Type-C phy lane0, DP lane1 on Type-C
+      phy lane1, DP lane2 on Type-C phy lane2, DP lane3 on Type-C phy lane3. If
+      DP lanes are mapped by DisplayPort Alt mode, this property is not needed.
+
+  rockchip,u2phy-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the 'usb2 phy general register files'.
+
+  rockchip,usb-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the 'usb general register files'.
+
+  rockchip,usbdpphy-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the 'usbdp phy general register files'.
+
+  rockchip,vo-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the 'video output general register files'.
+      When select the DP lane mapping will request its phandle.
+
+  sbu1-dc-gpios:
+    description:
+      GPIO connected to the SBU1 line of the USB-C connector via a big resistor
+      (~100K) to apply a DC offset for signalling the connector orientation.
+    maxItems: 1
+
+  sbu2-dc-gpios:
+    description:
+      GPIO connected to the SBU2 line of the USB-C connector via a big resistor
+      (~100K) to apply a DC offset for signalling the connector orientation.
+    maxItems: 1
+
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
+  mode-switch:
+    description: Flag the port as possible handler of altmode switching
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the PHY to a TypeC controller for the purpose of
+      handling orientation switching.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/reset/rockchip,rk3588-cru.h>
+
+    usbdp_phy0: phy@fed80000 {
+      compatible = "rockchip,rk3588-usbdp-phy";
+      reg = <0xfed80000 0x10000>;
+      #phy-cells = <1>;
+      clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>,
+               <&cru CLK_USBDP_PHY0_IMMORTAL>,
+               <&cru PCLK_USBDPPHY0>,
+               <&u2phy0>;
+      clock-names = "refclk", "immortal", "pclk", "utmi";
+      resets = <&cru SRST_USBDP_COMBO_PHY0_INIT>,
+               <&cru SRST_USBDP_COMBO_PHY0_CMN>,
+               <&cru SRST_USBDP_COMBO_PHY0_LANE>,
+               <&cru SRST_USBDP_COMBO_PHY0_PCS>,
+               <&cru SRST_P_USBDPPHY0>;
+      reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
+      rockchip,u2phy-grf = <&usb2phy0_grf>;
+      rockchip,usb-grf = <&usb_grf>;
+      rockchip,usbdpphy-grf = <&usbdpphy0_grf>;
+      rockchip,vo-grf = <&vo0_grf>;
+    };

diff --git a/Bindings/phy/phy-stm32-usbphyc.yaml b/Bindings/phy/phy-stm32-usbphyc.yaml
index 24a3dbd..ceea122 100644
--- a/Bindings/phy/phy-stm32-usbphyc.yaml
+++ b/Bindings/phy/phy-stm32-usbphyc.yaml

@@ -55,6 +55,10 @@
     description: number of clock cells for ck_usbo_48m consumer
     const: 0
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 # Required child nodes:
 
 patternProperties:

diff --git a/Bindings/phy/qcom,edp-phy.yaml b/Bindings/phy/qcom,edp-phy.yaml
index 6566353..4e15d90 100644
--- a/Bindings/phy/qcom,edp-phy.yaml
+++ b/Bindings/phy/qcom,edp-phy.yaml

@@ -21,6 +21,7 @@
       - qcom,sc8180x-edp-phy
       - qcom,sc8280xp-dp-phy
       - qcom,sc8280xp-edp-phy
+      - qcom,x1e80100-dp-phy
 
   reg:
     items:

diff --git a/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index ba966a7..16634f7 100644
--- a/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ b/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml

@@ -88,11 +88,11 @@
           - description: offset of PCIe 4-lane configuration register
           - description: offset of configuration bit for this PHY
 
-  "#clock-cells":
-    const: 0
+  "#clock-cells": true
 
   clock-output-names:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   "#phy-cells":
     const: 0
@@ -198,7 +198,6 @@
             enum:
               - qcom,sm8550-qmp-gen4x2-pcie-phy
               - qcom,sm8650-qmp-gen4x2-pcie-phy
-              - qcom,x1e80100-qmp-gen3x2-pcie-phy
               - qcom,x1e80100-qmp-gen4x2-pcie-phy
     then:
       properties:
@@ -212,6 +211,27 @@
           maxItems: 1
         reset-names:
           maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-qmp-gen4x2-pcie-phy
+              - qcom,sm8550-qmp-gen4x2-pcie-phy
+              - qcom,sm8650-qmp-gen4x2-pcie-phy
+    then:
+      properties:
+        clock-output-names:
+          minItems: 2
+        "#clock-cells":
+          const: 1
+    else:
+      properties:
+        clock-output-names:
+          maxItems: 1
+        "#clock-cells":
+          const: 0
 
 examples:
   - |

diff --git a/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
index 91a6cc3..f9cfbd0 100644
--- a/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
+++ b/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml

@@ -32,6 +32,7 @@
       - qcom,sm8250-qmp-ufs-phy
       - qcom,sm8350-qmp-ufs-phy
       - qcom,sm8450-qmp-ufs-phy
+      - qcom,sm8475-qmp-ufs-phy
       - qcom,sm8550-qmp-ufs-phy
       - qcom,sm8650-qmp-ufs-phy
 
@@ -71,7 +72,6 @@
   - reg
   - clocks
   - clock-names
-  - power-domains
   - resets
   - reset-names
   - vdda-phy-supply
@@ -86,6 +86,7 @@
             enum:
               - qcom,msm8998-qmp-ufs-phy
               - qcom,sa8775p-qmp-ufs-phy
+              - qcom,sc7180-qmp-ufs-phy
               - qcom,sc7280-qmp-ufs-phy
               - qcom,sc8180x-qmp-ufs-phy
               - qcom,sc8280xp-qmp-ufs-phy
@@ -98,6 +99,7 @@
               - qcom,sm8250-qmp-ufs-phy
               - qcom,sm8350-qmp-ufs-phy
               - qcom,sm8450-qmp-ufs-phy
+              - qcom,sm8475-qmp-ufs-phy
               - qcom,sm8550-qmp-ufs-phy
               - qcom,sm8650-qmp-ufs-phy
     then:
@@ -127,6 +129,21 @@
             - const: ref
             - const: qref
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-ufs-phy
+              - qcom,msm8998-qmp-ufs-phy
+    then:
+      properties:
+        power-domains:
+          false
+    else:
+      required:
+        - power-domains
+
 additionalProperties: false
 
 examples:

diff --git a/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
index 1e2d4dd..325585b 100644
--- a/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
+++ b/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml

@@ -20,6 +20,7 @@
       - qcom,ipq8074-qmp-usb3-phy
       - qcom,ipq9574-qmp-usb3-phy
       - qcom,msm8996-qmp-usb3-phy
+      - com,qdu1000-qmp-usb3-uni-phy
       - qcom,sa8775p-qmp-usb3-uni-phy
       - qcom,sc8280xp-qmp-usb3-uni-phy
       - qcom,sdm845-qmp-usb3-uni-phy
@@ -109,6 +110,7 @@
         compatible:
           contains:
             enum:
+              - qcom,qdu1000-qmp-usb3-uni-phy
               - qcom,sa8775p-qmp-usb3-uni-phy
               - qcom,sc8280xp-qmp-usb3-uni-phy
               - qcom,sm8150-qmp-usb3-uni-phy

diff --git a/Bindings/phy/qcom,snps-eusb2-repeater.yaml b/Bindings/phy/qcom,snps-eusb2-repeater.yaml
index 24c733c..90d7949 100644
--- a/Bindings/phy/qcom,snps-eusb2-repeater.yaml
+++ b/Bindings/phy/qcom,snps-eusb2-repeater.yaml

@@ -20,7 +20,9 @@
           - enum:
               - qcom,pm7550ba-eusb2-repeater
           - const: qcom,pm8550b-eusb2-repeater
-      - const: qcom,pm8550b-eusb2-repeater
+      - enum:
+          - qcom,pm8550b-eusb2-repeater
+          - qcom,smb2360-eusb2-repeater
 
   reg:
     maxItems: 1

diff --git a/Bindings/phy/qcom,usb-snps-femto-v2.yaml b/Bindings/phy/qcom,usb-snps-femto-v2.yaml
index 0f200e3..519c2b4 100644
--- a/Bindings/phy/qcom,usb-snps-femto-v2.yaml
+++ b/Bindings/phy/qcom,usb-snps-femto-v2.yaml

@@ -15,9 +15,6 @@
 properties:
   compatible:
     oneOf:
-      - enum:
-          - qcom,sc8180x-usb-hs-phy
-          - qcom,usb-snps-femto-v2-phy
       - items:
           - enum:
               - qcom,sa8775p-usb-hs-phy
@@ -25,7 +22,9 @@
           - const: qcom,usb-snps-hs-5nm-phy
       - items:
           - enum:
+              - qcom,qdu1000-usb-hs-phy
               - qcom,sc7280-usb-hs-phy
+              - qcom,sc8180x-usb-hs-phy
               - qcom,sdx55-usb-hs-phy
               - qcom,sdx65-usb-hs-phy
               - qcom,sm6375-usb-hs-phy

diff --git a/Bindings/phy/rockchip,pcie3-phy.yaml b/Bindings/phy/rockchip,pcie3-phy.yaml
index c4fbffc..ba67dca 100644
--- a/Bindings/phy/rockchip,pcie3-phy.yaml
+++ b/Bindings/phy/rockchip,pcie3-phy.yaml

@@ -54,6 +54,16 @@
     $ref: /schemas/types.yaml#/definitions/phandle
     description: phandle to the syscon managing the pipe "general register files"
 
+  rockchip,rx-common-refclk-mode:
+    description: which lanes (by position) should be configured to run in
+      RX common reference clock mode. 0 means disabled, 1 means enabled.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 16
+    items:
+      minimum: 0
+      maximum: 1
+
 required:
   - compatible
   - reg

diff --git a/Bindings/phy/samsung,ufs-phy.yaml b/Bindings/phy/samsung,ufs-phy.yaml
index 782f975..f402e31 100644
--- a/Bindings/phy/samsung,ufs-phy.yaml
+++ b/Bindings/phy/samsung,ufs-phy.yaml

@@ -15,6 +15,7 @@
 
   compatible:
     enum:
+      - google,gs101-ufs-phy
       - samsung,exynos7-ufs-phy
       - samsung,exynosautov9-ufs-phy
       - tesla,fsd-ufs-phy

diff --git a/Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
index bd72a32..d74cae9 100644
--- a/Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
+++ b/Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml

@@ -34,6 +34,9 @@
       the amount of cells must be specified as 2. See the below mentioned gpio
       binding representation for description of particular cells.
 
+  gpio-ranges:
+    maxItems: 1
+
   interrupt-controller: true
 
   interrupts:
@@ -75,8 +78,8 @@
           function:
             description:
               A string containing the name of the function to mux to the group.
-            enum: [emmc, eth, i2c, i2s, ir, led, flash, pcie, pmic, pwm, sd,
-                   spi, tdm, uart, watchdog, wifi]
+            enum: [antsel, emmc, eth, i2c, i2s, ir, led, flash, pcie, pmic, pwm,
+                   sd, spi, tdm, uart, watchdog, wifi]
 
           groups:
             description:
@@ -93,11 +96,26 @@
           - if:
               properties:
                 function:
+                  const: antsel
+            then:
+              properties:
+                groups:
+                  items:
+                    enum: [antsel0, antsel1, antsel2, antsel3, antsel4, antsel5,
+                           antsel6, antsel7, antsel8, antsel9, antsel10,
+                           antsel11, antsel12, antsel13, antsel14, antsel15,
+                           antsel16, antsel17, antsel18, antsel19, antsel20,
+                           antsel21, antsel22, antsel23, antsel24, antsel25,
+                           antsel26, antsel27, antsel28, antsel29]
+          - if:
+              properties:
+                function:
                   const: emmc
             then:
               properties:
                 groups:
-                  enum: [emmc, emmc_rst]
+                  items:
+                    enum: [emmc, emmc_rst]
           - if:
               properties:
                 function:
@@ -105,8 +123,9 @@
             then:
               properties:
                 groups:
-                  enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
-                         rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
+                  items:
+                    enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
+                           rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
           - if:
               properties:
                 function:
@@ -123,10 +142,11 @@
             then:
               properties:
                 groups:
-                  enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
-                         i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
-                         i2s1_out_data, i2s2_out_data, i2s3_out_data,
-                         i2s4_out_data]
+                  items:
+                    enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
+                           i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
+                           i2s1_out_data, i2s2_out_data, i2s3_out_data,
+                           i2s4_out_data]
           - if:
               properties:
                 function:
@@ -159,10 +179,11 @@
             then:
               properties:
                 groups:
-                  enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
-                         pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
-                         pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
-                         pcie_wake, pcie_clkreq]
+                  items:
+                    enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
+                           pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
+                           pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
+                           pcie_wake, pcie_clkreq]
           - if:
               properties:
                 function:
@@ -178,11 +199,12 @@
             then:
               properties:
                 groups:
-                  enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
-                         pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
-                         pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
-                         pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
-                         pwm_ch7_0, pwm_0, pwm_1]
+                  items:
+                    enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
+                           pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
+                           pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
+                           pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
+                           pwm_ch7_0, pwm_0, pwm_1]
           - if:
               properties:
                 function:
@@ -260,33 +282,34 @@
           pins:
             description:
               An array of strings. Each string contains the name of a pin.
-            enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
-                   RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
-                   I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
-                   I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
-                   G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
-                   G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
-                   NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
-                   MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
-                   MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
-                   MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
-                   MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
-                   PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
-                   GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
-                   PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
-                   AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
-                   PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
-                   WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
-                   WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
-                   EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
-                   EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
-                   WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
-                   UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
-                   UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
-                   PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
-                   GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
-                   TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
-                   WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
+            items:
+              enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
+                     RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
+                     I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
+                     I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
+                     G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
+                     G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
+                     NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
+                     MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
+                     MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
+                     MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
+                     MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
+                     PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
+                     GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
+                     PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
+                     AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
+                     PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
+                     WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
+                     WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
+                     EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
+                     EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
+                     WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
+                     UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
+                     UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
+                     PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
+                     GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
+                     TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
+                     WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
 
           bias-disable: true
 

diff --git a/Bindings/pinctrl/qcom,pmic-gpio.yaml b/Bindings/pinctrl/qcom,pmic-gpio.yaml
index 3f8ad07..0bf2d9f 100644
--- a/Bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/Bindings/pinctrl/qcom,pmic-gpio.yaml

@@ -24,11 +24,11 @@
           - qcom,pm6150-gpio
           - qcom,pm6150l-gpio
           - qcom,pm6350-gpio
+          - qcom,pm6450-gpio
           - qcom,pm7250b-gpio
           - qcom,pm7325-gpio
           - qcom,pm7550ba-gpio
           - qcom,pm8005-gpio
-          - qcom,pm8008-gpio
           - qcom,pm8018-gpio
           - qcom,pm8019-gpio
           - qcom,pm8038-gpio
@@ -56,10 +56,12 @@
           - qcom,pma8084-gpio
           - qcom,pmc8180-gpio
           - qcom,pmc8180c-gpio
+          - qcom,pmd8028-gpio
           - qcom,pmi632-gpio
           - qcom,pmi8950-gpio
           - qcom,pmi8994-gpio
           - qcom,pmi8998-gpio
+          - qcom,pmih0108-gpio
           - qcom,pmk8350-gpio
           - qcom,pmk8550-gpio
           - qcom,pmm8155au-gpio
@@ -72,6 +74,7 @@
           - qcom,pmx55-gpio
           - qcom,pmx65-gpio
           - qcom,pmx75-gpio
+          - qcom,pmxr2230-gpio
 
       - enum:
           - qcom,spmi-gpio
@@ -122,7 +125,6 @@
         compatible:
           contains:
             enum:
-              - qcom,pm8008-gpio
               - qcom,pmi8950-gpio
               - qcom,pmr735d-gpio
     then:
@@ -141,6 +143,7 @@
               - qcom,pm8005-gpio
               - qcom,pm8450-gpio
               - qcom,pm8916-gpio
+              - qcom,pmd8028-gpio
               - qcom,pmk8350-gpio
               - qcom,pmr735a-gpio
               - qcom,pmr735b-gpio
@@ -198,6 +201,7 @@
           contains:
             enum:
               - qcom,pm6350-gpio
+              - qcom,pm6450-gpio
               - qcom,pm8350c-gpio
     then:
       properties:
@@ -261,6 +265,7 @@
               - qcom,pmc8180c-gpio
               - qcom,pmp8074-gpio
               - qcom,pms405-gpio
+              - qcom,pmxr2230-gpio
     then:
       properties:
         gpio-line-names:
@@ -305,6 +310,21 @@
         compatible:
           contains:
             enum:
+              - qcom,pmih0108-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 18
+          maxItems: 18
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 9
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,pmx65-gpio
               - qcom,pmx75-gpio
     then:
@@ -402,6 +422,10 @@
             $ref: "#/$defs/qcom-pmic-gpio-state"
         additionalProperties: false
 
+  "-hog(-[0-9]+)?$":
+    required:
+      - gpio-hog
+
 $defs:
   qcom-pmic-gpio-state:
     type: object
@@ -417,11 +441,11 @@
                  - gpio1-gpio10 for pm6150
                  - gpio1-gpio12 for pm6150l
                  - gpio1-gpio9 for pm6350
+                 - gpio1-gpio9 for pm6450
                  - gpio1-gpio12 for pm7250b
                  - gpio1-gpio10 for pm7325
                  - gpio1-gpio8 for pm7550ba
                  - gpio1-gpio4 for pm8005
-                 - gpio1-gpio2 for pm8008
                  - gpio1-gpio6 for pm8018
                  - gpio1-gpio12 for pm8038
                  - gpio1-gpio40 for pm8058
@@ -447,9 +471,11 @@
                  - gpio1-gpio22 for pm8994
                  - gpio1-gpio26 for pm8998
                  - gpio1-gpio22 for pma8084
+                 - gpio1-gpio4 for pmd8028
                  - gpio1-gpio8 for pmi632
                  - gpio1-gpio2 for pmi8950
                  - gpio1-gpio10 for pmi8994
+                 - gpio1-gpio18 for pmih0108
                  - gpio1-gpio4 for pmk8350
                  - gpio1-gpio6 for pmk8550
                  - gpio1-gpio10 for pmm8155au
@@ -464,6 +490,7 @@
                                             and gpio11)
                  - gpio1-gpio16 for pmx65
                  - gpio1-gpio16 for pmx75
+                 - gpio1-gpio12 for pmxr2230
 
         items:
           pattern: "^gpio([0-9]+)$"
@@ -545,6 +572,7 @@
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
     pm8921_gpio: gpio@150 {
@@ -568,5 +596,12 @@
           power-source = <PM8921_GPIO_S4>;
         };
       };
+
+      otg-hog {
+        gpio-hog;
+        gpios = <35 GPIO_ACTIVE_HIGH>;
+        output-high;
+        line-name = "otg-gpio";
+      };
     };
 ...

diff --git a/Bindings/pinctrl/qcom,pmic-mpp.yaml b/Bindings/pinctrl/qcom,pmic-mpp.yaml
index fe717d8..4314670 100644
--- a/Bindings/pinctrl/qcom,pmic-mpp.yaml
+++ b/Bindings/pinctrl/qcom,pmic-mpp.yaml

@@ -35,6 +35,7 @@
               - qcom,pm8038-mpp
               - qcom,pm8058-mpp
               - qcom,pm8821-mpp
+              - qcom,pm8901-mpp
               - qcom,pm8917-mpp
               - qcom,pm8921-mpp
           - const: qcom,ssbi-mpp

diff --git a/Bindings/pinctrl/qcom,sm4450-tlmm.yaml b/Bindings/pinctrl/qcom,sm4450-tlmm.yaml
index bb675c8..1b941b2 100644
--- a/Bindings/pinctrl/qcom,sm4450-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,sm4450-tlmm.yaml

@@ -72,40 +72,24 @@
         description:
           Specify the alternative function to be configured for the specified
           pins.
-        enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2,
-                atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02,
-                atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c,
-                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
-                cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, cri_trng,
-                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
-                dp0_hot, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, ibi_i3c,
-                jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
-                mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws,
-                mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0,
-                mi2s_mclk1, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk,
-                phase_flag0, phase_flag1, phase_flag10, phase_flag11,
-                phase_flag12, phase_flag13, phase_flag14, phase_flag15,
-                phase_flag16, phase_flag17, phase_flag18, phase_flag19,
-                phase_flag2, phase_flag20, phase_flag21, phase_flag22,
-                phase_flag23, phase_flag24, phase_flag25, phase_flag26,
-                phase_flag27, phase_flag28, phase_flag29, phase_flag3,
-                phase_flag30, phase_flag31, phase_flag4, phase_flag5,
-                phase_flag6, phase_flag7, phase_flag8, phase_flag9,
-                pll_bist, pll_clk, prng_rosc0, prng_rosc1, prng_rosc2,
-                prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1,
-                qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
-                qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5,
-                qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
-                qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
-                qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss,
-                qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5,
-                qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
-                qup1_se4, qup1_se5, qup1_se6, sd_write, tb_trig, tgu_ch0,
-                tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
-                tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk,
-                uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
-                uim1_present, uim1_reset, usb0_hs, usb0_phy, vfr_0, vfr_1,
-                vsense_trigger ]
+        enum: [ gpio, atest_char, atest_usb0, audio_ref_clk, cam_mclk,
+                cci_async_in0, cci_i2c, cci, cmu_rng, coex_uart1_rx,
+                coex_uart1_tx, cri_trng, dbg_out_clk, ddr_bist,
+                ddr_pxi0_test, ddr_pxi1_test, gcc_gp1_clk, gcc_gp2_clk,
+                gcc_gp3_clk, host2wlan_sol, ibi_i3c_qup0, ibi_i3c_qup1,
+                jitter_bist_ref, mdp_vsync0_out, mdp_vsync1_out,
+                mdp_vsync2_out, mdp_vsync3_out, mdp_vsync, nav,
+                pcie0_clk_req, phase_flag, pll_bist_sync, pll_clk_aux,
+                prng_rosc, qdss_cti_trig0, qdss_cti_trig1, qdss_gpio,
+                qlink0_enable, qlink0_request, qlink0_wmss_reset,
+                qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4,
+                qup1_se0, qup1_se1, qup1_se2, qup1_se2_l2, qup1_se3,
+                qup1_se4, sd_write_protect, tb_trig_sdc1, tb_trig_sdc2,
+                tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout,
+                tgu_ch3_trigout, tmess_prng, tsense_pwm1_out,
+                tsense_pwm2_out, uim0, uim1, usb0_hs_ac, usb0_phy_ps,
+                vfr_0_mira, vfr_0_mirb, vfr_1, vsense_trigger_mirnat,
+                wlan1_adc_dtest0, wlan1_adc_dtest1 ]
 
         required:
           - pins

diff --git a/Bindings/pinctrl/samsung,pinctrl.yaml b/Bindings/pinctrl/samsung,pinctrl.yaml
index 118549c..242dd13 100644
--- a/Bindings/pinctrl/samsung,pinctrl.yaml
+++ b/Bindings/pinctrl/samsung,pinctrl.yaml

@@ -73,6 +73,13 @@
     minItems: 1
     maxItems: 2
 
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pclk
+
   wakeup-interrupt-controller:
     $ref: samsung,pinctrl-wakeup-interrupt.yaml
 
@@ -124,6 +131,20 @@
       properties:
         compatible:
           contains:
+            const: google,gs101-pinctrl
+    then:
+      required:
+        - clocks
+        - clock-names
+    else:
+      properties:
+        clocks: false
+        clock-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
             const: samsung,exynos5433-pinctrl
     then:
       properties:

diff --git a/Bindings/platform/acer,aspire1-ec.yaml b/Bindings/platform/acer,aspire1-ec.yaml
new file mode 100644
index 0000000..7cb0134
--- /dev/null
+++ b/Bindings/platform/acer,aspire1-ec.yaml

@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/platform/acer,aspire1-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Acer Aspire 1 Embedded Controller
+
+maintainers:
+  - Nikita Travkin <nikita@trvn.ru>
+
+description:
+  The Acer Aspire 1 laptop uses an embedded controller to control battery
+  and charging as well as to provide a set of misc features such as the
+  laptop lid status and HPD events for the USB Type-C DP alt mode.
+
+properties:
+  compatible:
+    const: acer,aspire1-ec
+
+  reg:
+    const: 0x76
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        embedded-controller@76 {
+            compatible = "acer,aspire1-ec";
+            reg = <0x76>;
+
+            interrupts-extended = <&tlmm 30 IRQ_TYPE_LEVEL_LOW>;
+
+            connector {
+                compatible = "usb-c-connector";
+
+                port {
+                    ec_dp_in: endpoint {
+                        remote-endpoint = <&mdss_dp_out>;
+                    };
+                };
+            };
+        };
+    };

diff --git a/Bindings/power/supply/maxim,max8903.yaml b/Bindings/power/supply/maxim,max8903.yaml
index a8d625f..86af383 100644
--- a/Bindings/power/supply/maxim,max8903.yaml
+++ b/Bindings/power/supply/maxim,max8903.yaml

@@ -34,7 +34,7 @@
 
   flt-gpios:
     maxItems: 1
-    description: Fault pin (active low, output)
+    description: Fault pin (active low, input)
 
   dcm-gpios:
     maxItems: 1

diff --git a/Bindings/pwm/atmel,at91sam-pwm.yaml b/Bindings/pwm/atmel,at91sam-pwm.yaml
index d84268b..96cd6f3 100644
--- a/Bindings/pwm/atmel,at91sam-pwm.yaml
+++ b/Bindings/pwm/atmel,at91sam-pwm.yaml

@@ -25,6 +25,9 @@
       - items:
           - const: microchip,sama7g5-pwm
           - const: atmel,sama5d2-pwm
+      - items:
+          - const: microchip,sam9x7-pwm
+          - const: microchip,sam9x60-pwm
 
   reg:
     maxItems: 1

diff --git a/Bindings/pwm/google,cros-ec-pwm.yaml b/Bindings/pwm/google,cros-ec-pwm.yaml
index 3afe148..f7bc84b 100644
--- a/Bindings/pwm/google,cros-ec-pwm.yaml
+++ b/Bindings/pwm/google,cros-ec-pwm.yaml

@@ -35,7 +35,6 @@
 
 required:
   - compatible
-  - '#pwm-cells'
 
 additionalProperties: false
 

diff --git a/Bindings/pwm/marvell,pxa-pwm.yaml b/Bindings/pwm/marvell,pxa-pwm.yaml
index ba63255..9ee1946 100644
--- a/Bindings/pwm/marvell,pxa-pwm.yaml
+++ b/Bindings/pwm/marvell,pxa-pwm.yaml

@@ -34,7 +34,6 @@
 required:
   - compatible
   - reg
-  - "#pwm-cells"
   - clocks
 
 additionalProperties: false

diff --git a/Bindings/pwm/mediatek,mt2712-pwm.yaml b/Bindings/pwm/mediatek,mt2712-pwm.yaml
index a5c3088..d515c09 100644
--- a/Bindings/pwm/mediatek,mt2712-pwm.yaml
+++ b/Bindings/pwm/mediatek,mt2712-pwm.yaml

@@ -66,7 +66,6 @@
 required:
   - compatible
   - reg
-  - "#pwm-cells"
   - clocks
   - clock-names
 

diff --git a/Bindings/pwm/mediatek,pwm-disp.yaml b/Bindings/pwm/mediatek,pwm-disp.yaml
index bc813fe..195e437 100644
--- a/Bindings/pwm/mediatek,pwm-disp.yaml
+++ b/Bindings/pwm/mediatek,pwm-disp.yaml

@@ -31,6 +31,7 @@
               - mediatek,mt8188-disp-pwm
               - mediatek,mt8192-disp-pwm
               - mediatek,mt8195-disp-pwm
+              - mediatek,mt8365-disp-pwm
           - const: mediatek,mt8183-disp-pwm
 
   reg:
@@ -58,7 +59,6 @@
 required:
   - compatible
   - reg
-  - "#pwm-cells"
   - clocks
   - clock-names
 

diff --git a/Bindings/pwm/pwm-bcm2835.yaml b/Bindings/pwm/pwm-bcm2835.yaml
index 15e7fd9..9dc25f3 100644
--- a/Bindings/pwm/pwm-bcm2835.yaml
+++ b/Bindings/pwm/pwm-bcm2835.yaml

@@ -29,7 +29,6 @@
   - compatible
   - reg
   - clocks
-  - "#pwm-cells"
 
 additionalProperties: false
 

diff --git a/Bindings/pwm/snps,dw-apb-timers-pwm2.yaml b/Bindings/pwm/snps,dw-apb-timers-pwm2.yaml
index 4d0b596..7523a89 100644
--- a/Bindings/pwm/snps,dw-apb-timers-pwm2.yaml
+++ b/Bindings/pwm/snps,dw-apb-timers-pwm2.yaml

@@ -51,7 +51,6 @@
 required:
   - compatible
   - reg
-  - "#pwm-cells"
   - clocks
   - clock-names
 

diff --git a/Bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml b/Bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml
new file mode 100644
index 0000000..ec6695c
--- /dev/null
+++ b/Bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml

@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/allwinner,sun20i-d1-system-ldos.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner D1 System LDOs
+
+maintainers:
+  - Samuel Holland <samuel@sholland.org>
+
+description:
+  Allwinner D1 contains a pair of general-purpose LDOs which are designed to
+  supply power inside and outside the SoC. They are controlled by a register
+  within the system control MMIO space.
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun20i-d1-system-ldos
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^ldo[ab]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+...

diff --git a/Bindings/regulator/fixed-regulator.yaml b/Bindings/regulator/fixed-regulator.yaml
index 9ff9abf..51e2f6f 100644
--- a/Bindings/regulator/fixed-regulator.yaml
+++ b/Bindings/regulator/fixed-regulator.yaml

@@ -41,6 +41,13 @@
         - gpios
 
 properties:
+  $nodename:
+    anyOf:
+      - description: Preferred name is 'regulator-[0-9]v[0-9]'
+        pattern: '^regulator(-[0-9]+v[0-9]+|-[0-9a-z-]+)?$'
+      - description: Any name allowed
+        deprecated: true
+
   compatible:
     enum:
       - regulator-fixed

diff --git a/Bindings/regulator/nxp,pca9450-regulator.yaml b/Bindings/regulator/nxp,pca9450-regulator.yaml
index 3d469b8..849bfa5 100644
--- a/Bindings/regulator/nxp,pca9450-regulator.yaml
+++ b/Bindings/regulator/nxp,pca9450-regulator.yaml

@@ -28,6 +28,7 @@
       - nxp,pca9450a
       - nxp,pca9450b
       - nxp,pca9450c
+      - nxp,pca9451a
 
   reg:
     maxItems: 1

diff --git a/Bindings/regulator/qcom,usb-vbus-regulator.yaml b/Bindings/regulator/qcom,usb-vbus-regulator.yaml
index 33ae1f7..fcefc72 100644
--- a/Bindings/regulator/qcom,usb-vbus-regulator.yaml
+++ b/Bindings/regulator/qcom,usb-vbus-regulator.yaml

@@ -26,6 +26,7 @@
           - enum:
               - qcom,pm4125-vbus-reg
               - qcom,pm6150-vbus-reg
+              - qcom,pm7250b-vbus-reg
               - qcom,pmi632-vbus-reg
           - const: qcom,pm8150b-vbus-reg
 

diff --git a/Bindings/regulator/st,stm32-vrefbuf.yaml b/Bindings/regulator/st,stm32-vrefbuf.yaml
index 05f4ad2..6ceaffb 100644
--- a/Bindings/regulator/st,stm32-vrefbuf.yaml
+++ b/Bindings/regulator/st,stm32-vrefbuf.yaml

@@ -30,6 +30,10 @@
   vdda-supply:
     description: phandle to the vdda input analog voltage.
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

diff --git a/Bindings/regulator/ti,tps62864.yaml b/Bindings/regulator/ti,tps62864.yaml
index 0f29c75..dddea27 100644
--- a/Bindings/regulator/ti,tps62864.yaml
+++ b/Bindings/regulator/ti,tps62864.yaml

@@ -24,7 +24,7 @@
     type: object
 
     properties:
-      "SW":
+      SW:
         type: object
         $ref: regulator.yaml#
         unevaluatedProperties: false

diff --git a/Bindings/remoteproc/mtk,scp.yaml b/Bindings/remoteproc/mtk,scp.yaml
index 507f98f..c5dc3c2 100644
--- a/Bindings/remoteproc/mtk,scp.yaml
+++ b/Bindings/remoteproc/mtk,scp.yaml

@@ -19,6 +19,7 @@
       - mediatek,mt8183-scp
       - mediatek,mt8186-scp
       - mediatek,mt8188-scp
+      - mediatek,mt8188-scp-dual
       - mediatek,mt8192-scp
       - mediatek,mt8195-scp
       - mediatek,mt8195-scp-dual
@@ -194,6 +195,7 @@
       properties:
         compatible:
           enum:
+            - mediatek,mt8188-scp-dual
             - mediatek,mt8195-scp-dual
     then:
       properties:

diff --git a/Bindings/remoteproc/qcom,msm8996-mss-pil.yaml b/Bindings/remoteproc/qcom,msm8996-mss-pil.yaml
index 9717340..4d2055f 100644
--- a/Bindings/remoteproc/qcom,msm8996-mss-pil.yaml
+++ b/Bindings/remoteproc/qcom,msm8996-mss-pil.yaml

@@ -231,7 +231,6 @@
             - const: snoc_axi
             - const: mnoc_axi
             - const: qdss
-        glink-edge: false
       required:
         - pll-supply
         - smd-edge

diff --git a/Bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml b/Bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
index 06f5f93..bca5939 100644
--- a/Bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
+++ b/Bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml

@@ -81,7 +81,11 @@
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description:
       Phandle reference to a syscon representing TCSR followed by the
-      three offsets within syscon for q6, modem and nc halt registers.
+      offset within syscon for q6 halt register.
+    items:
+      - items:
+          - description: phandle to TCSR syscon region
+          - description: offset to the Q6 halt register
 
   qcom,smem-states:
     $ref: /schemas/types.yaml#/definitions/phandle-array

diff --git a/Bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
index 9381c70..f4118b2 100644
--- a/Bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
+++ b/Bindings/remoteproc/qcom,sc7280-wpss-pil.yaml

@@ -89,7 +89,11 @@
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description:
       Phandle reference to a syscon representing TCSR followed by the
-      three offsets within syscon for q6, modem and nc halt registers.
+      offset within syscon for q6 halt register.
+    items:
+      - items:
+          - description: phandle to TCSR syscon region
+          - description: offset to the Q6 halt register
 
   qcom,qmp:
     $ref: /schemas/types.yaml#/definitions/phandle

diff --git a/Bindings/remoteproc/qcom,sdm845-adsp-pil.yaml b/Bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
index 20df83a..a3c7487 100644
--- a/Bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
+++ b/Bindings/remoteproc/qcom,sdm845-adsp-pil.yaml

@@ -81,7 +81,11 @@
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description:
       Phandle reference to a syscon representing TCSR followed by the
-      three offsets within syscon for q6, modem and nc halt registers.
+      offset within syscon for q6 halt register.
+    items:
+      - items:
+          - description: phandle to TCSR syscon region
+          - description: offset to the Q6 halt register
 
   qcom,smem-states:
     $ref: /schemas/types.yaml#/definitions/phandle-array

diff --git a/Bindings/remoteproc/qcom,smd-edge.yaml b/Bindings/remoteproc/qcom,smd-edge.yaml
index 02c85b4..63500b1 100644
--- a/Bindings/remoteproc/qcom,smd-edge.yaml
+++ b/Bindings/remoteproc/qcom,smd-edge.yaml

@@ -61,6 +61,7 @@
     description:
       Three entries specifying the outgoing ipc bit used for signaling the
       remote processor.
+    deprecated: true
 
   qcom,smd-edge:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -111,7 +112,7 @@
         smd-edge {
             interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
 
-            qcom,ipc = <&apcs 8 8>;
+            mboxes = <&apcs 8>;
             qcom,smd-edge = <1>;
         };
     };

diff --git a/Bindings/remoteproc/xlnx,zynqmp-r5fss.yaml b/Bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
index 78aac69..6f13da1 100644
--- a/Bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
+++ b/Bindings/remoteproc/xlnx,zynqmp-r5fss.yaml

@@ -18,11 +18,26 @@
 
 properties:
   compatible:
-    const: xlnx,zynqmp-r5fss
+    enum:
+      - xlnx,zynqmp-r5fss
+      - xlnx,versal-r5fss
+      - xlnx,versal-net-r52fss
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges:
+    description: |
+      Standard ranges definition providing address translations for
+      local R5F TCM address spaces to bus addresses.
 
   xlnx,cluster-mode:
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1, 2]
+    default: 1
     description: |
       The RPU MPCore can operate in split mode (Dual-processor performance), Safety
       lock-step mode(Both RPU cores execute the same code in lock-step,
@@ -36,8 +51,16 @@
       1: lockstep mode (default)
       2: single cpu mode
 
+  xlnx,tcm-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      Configure RPU TCM
+      0: split mode
+      1: lockstep mode
+
 patternProperties:
-  "^r5f-[a-f0-9]+$":
+  "^r(.*)@[0-9a-f]+$":
     type: object
     description: |
       The RPU is located in the Low Power Domain of the Processor Subsystem.
@@ -52,10 +75,22 @@
 
     properties:
       compatible:
-        const: xlnx,zynqmp-r5f
+        enum:
+          - xlnx,zynqmp-r5f
+          - xlnx,versal-r5f
+          - xlnx,versal-net-r52f
+
+      reg:
+        minItems: 1
+        maxItems: 4
+
+      reg-names:
+        minItems: 1
+        maxItems: 4
 
       power-domains:
-        maxItems: 1
+        minItems: 2
+        maxItems: 5
 
       mboxes:
         minItems: 1
@@ -101,35 +136,235 @@
 
     required:
       - compatible
+      - reg
+      - reg-names
       - power-domains
 
-    unevaluatedProperties: false
-
 required:
   - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,versal-net-r52fss
+    then:
+      properties:
+        xlnx,tcm-mode: false
+
+      patternProperties:
+        "^r52f@[0-9a-f]+$":
+          type: object
+
+          properties:
+            reg:
+              minItems: 1
+              items:
+                - description: ATCM internal memory
+                - description: BTCM internal memory
+                - description: CTCM internal memory
+
+            reg-names:
+              minItems: 1
+              items:
+                - const: atcm0
+                - const: btcm0
+                - const: ctcm0
+
+            power-domains:
+              minItems: 2
+              items:
+                - description: RPU core power domain
+                - description: ATCM power domain
+                - description: BTCM power domain
+                - description: CTCM power domain
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,zynqmp-r5fss
+              - xlnx,versal-r5fss
+    then:
+      if:
+        properties:
+          xlnx,cluster-mode:
+            enum: [1, 2]
+      then:
+        properties:
+          xlnx,tcm-mode:
+            enum: [1]
+
+        patternProperties:
+          "^r5f@[0-9a-f]+$":
+            type: object
+
+            properties:
+              reg:
+                minItems: 1
+                items:
+                  - description: ATCM internal memory
+                  - description: BTCM internal memory
+                  - description: extra ATCM memory in lockstep mode
+                  - description: extra BTCM memory in lockstep mode
+
+              reg-names:
+                minItems: 1
+                items:
+                  - const: atcm0
+                  - const: btcm0
+                  - const: atcm1
+                  - const: btcm1
+
+              power-domains:
+                minItems: 2
+                items:
+                  - description: RPU core power domain
+                  - description: ATCM power domain
+                  - description: BTCM power domain
+                  - description: second ATCM power domain
+                  - description: second BTCM power domain
+
+        required:
+          - xlnx,tcm-mode
+
+      else:
+        properties:
+          xlnx,tcm-mode:
+            enum: [0]
+
+        patternProperties:
+          "^r5f@[0-9a-f]+$":
+            type: object
+
+            properties:
+              reg:
+                minItems: 1
+                items:
+                  - description: ATCM internal memory
+                  - description: BTCM internal memory
+
+              reg-names:
+                minItems: 1
+                items:
+                  - const: atcm0
+                  - const: btcm0
+
+              power-domains:
+                minItems: 2
+                items:
+                  - description: RPU core power domain
+                  - description: ATCM power domain
+                  - description: BTCM power domain
+
+        required:
+          - xlnx,tcm-mode
 
 additionalProperties: false
 
 examples:
   - |
-    remoteproc {
-        compatible = "xlnx,zynqmp-r5fss";
-        xlnx,cluster-mode = <1>;
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
 
-        r5f-0 {
-            compatible = "xlnx,zynqmp-r5f";
-            power-domains = <&zynqmp_firmware 0x7>;
-            memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
-            mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
-            mbox-names = "tx", "rx";
+    // Split mode configuration
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        remoteproc@ffe00000 {
+            compatible = "xlnx,zynqmp-r5fss";
+            xlnx,cluster-mode = <0>;
+            xlnx,tcm-mode = <0>;
+
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
+                     <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
+                     <0x1 0x0 0x0 0xffe90000 0x0 0x10000>,
+                     <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>;
+
+            r5f@0 {
+                compatible = "xlnx,zynqmp-r5f";
+                reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>;
+                reg-names = "atcm0", "btcm0";
+                power-domains = <&zynqmp_firmware PD_RPU_0>,
+                                <&zynqmp_firmware PD_R5_0_ATCM>,
+                                <&zynqmp_firmware PD_R5_0_BTCM>;
+                memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>,
+                                <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
+                mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
+                mbox-names = "tx", "rx";
+            };
+
+            r5f@1 {
+                compatible = "xlnx,zynqmp-r5f";
+                reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
+                reg-names = "atcm0", "btcm0";
+                power-domains = <&zynqmp_firmware PD_RPU_1>,
+                                <&zynqmp_firmware PD_R5_1_ATCM>,
+                                <&zynqmp_firmware PD_R5_1_BTCM>;
+                memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>,
+                                <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
+                mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
+                mbox-names = "tx", "rx";
+            };
         };
+    };
+
+  - |
+    //Lockstep configuration
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        remoteproc@ffe00000 {
+            compatible = "xlnx,zynqmp-r5fss";
+            xlnx,cluster-mode = <1>;
+            xlnx,tcm-mode = <1>;
+
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
+                     <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
+                     <0x0 0x10000 0x0 0xffe10000 0x0 0x10000>,
+                     <0x0 0x30000 0x0 0xffe30000 0x0 0x10000>;
+
+            r5f@0 {
+                compatible = "xlnx,zynqmp-r5f";
+                reg = <0x0 0x0 0x0 0x10000>,
+                      <0x0 0x20000 0x0 0x10000>,
+                      <0x0 0x10000 0x0 0x10000>,
+                      <0x0 0x30000 0x0 0x10000>;
+                reg-names = "atcm0", "btcm0", "atcm1", "btcm1";
+                power-domains = <&zynqmp_firmware PD_RPU_0>,
+                                <&zynqmp_firmware PD_R5_0_ATCM>,
+                                <&zynqmp_firmware PD_R5_0_BTCM>,
+                                <&zynqmp_firmware PD_R5_1_ATCM>,
+                                <&zynqmp_firmware PD_R5_1_BTCM>;
+                memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>,
+                                <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
+                mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
+                mbox-names = "tx", "rx";
+            };
 
-        r5f-1 {
-            compatible = "xlnx,zynqmp-r5f";
-            power-domains = <&zynqmp_firmware 0x8>;
-            memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
-            mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
-            mbox-names = "tx", "rx";
+            r5f@1 {
+                compatible = "xlnx,zynqmp-r5f";
+                reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
+                reg-names = "atcm0", "btcm0";
+                power-domains = <&zynqmp_firmware PD_RPU_1>,
+                                <&zynqmp_firmware PD_R5_1_ATCM>,
+                                <&zynqmp_firmware PD_R5_1_BTCM>;
+                memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>,
+                                <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
+                mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
+                mbox-names = "tx", "rx";
+            };
         };
     };
 ...

diff --git a/Bindings/riscv/starfive.yaml b/Bindings/riscv/starfive.yaml
index cc4d92f..b672f85 100644
--- a/Bindings/riscv/starfive.yaml
+++ b/Bindings/riscv/starfive.yaml

@@ -26,6 +26,7 @@
 
       - items:
           - enum:
+              - milkv,mars
               - starfive,visionfive-2-v1.2a
               - starfive,visionfive-2-v1.3b
           - const: starfive,jh7110

diff --git a/Bindings/rng/microsoft,vmgenid.yaml b/Bindings/rng/microsoft,vmgenid.yaml
new file mode 100644
index 0000000..8f20dee
--- /dev/null
+++ b/Bindings/rng/microsoft,vmgenid.yaml

@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/microsoft,vmgenid.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Virtual Machine Generation ID
+
+maintainers:
+  - Jason A. Donenfeld <Jason@zx2c4.com>
+
+description:
+  Firmwares or hypervisors can use this devicetree to describe an
+  interrupt and a shared resource to inject a Virtual Machine Generation ID.
+  Virtual Machine Generation ID is a globally unique identifier (GUID) and
+  the devicetree binding follows VMGenID specification defined in
+  http://go.microsoft.com/fwlink/?LinkId=260709.
+
+properties:
+  compatible:
+    const: microsoft,vmgenid
+
+  reg:
+    description:
+      Specifies a 16-byte VMGenID in endianness-agnostic hexadecimal format.
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt used to notify that a new VMGenID is available.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    rng@80000000 {
+      compatible = "microsoft,vmgenid";
+      reg = <0x80000000 0x1000>;
+      interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>;
+    };
+
+...

diff --git a/Bindings/rng/st,stm32-rng.yaml b/Bindings/rng/st,stm32-rng.yaml
index 717f6b3..340d01d 100644
--- a/Bindings/rng/st,stm32-rng.yaml
+++ b/Bindings/rng/st,stm32-rng.yaml

@@ -37,6 +37,10 @@
     description: If set, the RNG configuration in RNG_CR, RNG_HTCR and
                   RNG_NSCR will be locked.
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

diff --git a/Bindings/rtc/alphascale,asm9260-rtc.txt b/Bindings/rtc/alphascale,asm9260-rtc.txt
deleted file mode 100644
index 76ebca5..0000000
--- a/Bindings/rtc/alphascale,asm9260-rtc.txt
+++ /dev/null

@@ -1,19 +0,0 @@
-* Alphascale asm9260 SoC Real Time Clock
-
-Required properties:
-- compatible: Should be "alphascale,asm9260-rtc"
-- reg: Physical base address of the controller and length
-       of memory mapped region.
-- interrupts: IRQ line for the RTC.
-- clocks: Reference to the clock entry.
-- clock-names: should contain:
-  * "ahb" for the SoC RTC clock
-
-Example:
-rtc0: rtc@800a0000 {
-	compatible = "alphascale,asm9260-rtc";
-	reg = <0x800a0000 0x100>;
-	clocks = <&acc CLKID_AHB_RTC>;
-	clock-names = "ahb";
-	interrupts = <2>;
-};

diff --git a/Bindings/rtc/alphascale,asm9260-rtc.yaml b/Bindings/rtc/alphascale,asm9260-rtc.yaml
new file mode 100644
index 0000000..f955a7f
--- /dev/null
+++ b/Bindings/rtc/alphascale,asm9260-rtc.yaml

@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/alphascale,asm9260-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Alphascale asm9260 SoC Real Time Clock
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    const: alphascale,asm9260-rtc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ahb
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/alphascale,asm9260.h>
+
+    rtc@800a0000 {
+        compatible = "alphascale,asm9260-rtc";
+        reg = <0x800a0000 0x100>;
+        clocks = <&acc CLKID_AHB_RTC>;
+        clock-names = "ahb";
+        interrupts = <2>;
+    };

diff --git a/Bindings/rtc/armada-380-rtc.txt b/Bindings/rtc/armada-380-rtc.txt
deleted file mode 100644
index c3c9a12..0000000
--- a/Bindings/rtc/armada-380-rtc.txt
+++ /dev/null

@@ -1,24 +0,0 @@
-* Real Time Clock of the Armada 38x/7K/8K SoCs
-
-RTC controller for the Armada 38x, 7K and 8K SoCs
-
-Required properties:
-- compatible : Should be one of the following:
-	"marvell,armada-380-rtc" for Armada 38x SoC
-	"marvell,armada-8k-rtc" for Aramda 7K/8K SoCs
-- reg: a list of base address and size pairs, one for each entry in
-  reg-names
-- reg names: should contain:
-  * "rtc" for the RTC registers
-  * "rtc-soc" for the SoC related registers and among them the one
-    related to the interrupt.
-- interrupts: IRQ line for the RTC.
-
-Example:
-
-rtc@a3800 {
-	compatible = "marvell,armada-380-rtc";
-	reg = <0xa3800 0x20>, <0x184a0 0x0c>;
-	reg-names = "rtc", "rtc-soc";
-	interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-};

diff --git a/Bindings/rtc/digicolor-rtc.txt b/Bindings/rtc/digicolor-rtc.txt
deleted file mode 100644
index d464986..0000000
--- a/Bindings/rtc/digicolor-rtc.txt
+++ /dev/null

@@ -1,17 +0,0 @@
-Conexant Digicolor Real Time Clock controller
-
-This binding currently supports the CX92755 SoC.
-
-Required properties:
-- compatible: should be "cnxt,cx92755-rtc"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: rtc alarm interrupt
-
-Example:
-
-	rtc@f0000c30 {
-		compatible = "cnxt,cx92755-rtc";
-		reg = <0xf0000c30 0x18>;
-		interrupts = <25>;
-	};

diff --git a/Bindings/rtc/fsl,stmp3xxx-rtc.yaml b/Bindings/rtc/fsl,stmp3xxx-rtc.yaml
new file mode 100644
index 0000000..534de41
--- /dev/null
+++ b/Bindings/rtc/fsl,stmp3xxx-rtc.yaml

@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/fsl,stmp3xxx-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMP3xxx/i.MX28 Time Clock Controller
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx28-rtc
+              - fsl,imx23-rtc
+          - const: fsl,stmp3xxx-rtc
+      - const: fsl,stmp3xxx-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  stmp,crystal-freq:
+    description:
+      Override crystal frequency as determined from fuse bits.
+      Use <0> for "no crystal".
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 32000, 32768]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    rtc@80056000 {
+        compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
+        reg = <0x80056000 2000>;
+        interrupts = <29>;
+    };

diff --git a/Bindings/rtc/google,goldfish-rtc.txt b/Bindings/rtc/google,goldfish-rtc.txt
deleted file mode 100644
index 634312d..0000000
--- a/Bindings/rtc/google,goldfish-rtc.txt
+++ /dev/null

@@ -1,17 +0,0 @@
-Android Goldfish RTC
-
-Android Goldfish RTC device used by Android emulator.
-
-Required properties:
-
-- compatible : should contain "google,goldfish-rtc"
-- reg        : <registers mapping>
-- interrupts : <interrupt mapping>
-
-Example:
-
-	goldfish_timer@9020000 {
-		compatible = "google,goldfish-rtc";
-		reg = <0x9020000 0x1000>;
-		interrupts = <0x3>;
-	};

diff --git a/Bindings/rtc/lpc32xx-rtc.txt b/Bindings/rtc/lpc32xx-rtc.txt
deleted file mode 100644
index a87a1e9..0000000
--- a/Bindings/rtc/lpc32xx-rtc.txt
+++ /dev/null

@@ -1,15 +0,0 @@
-* NXP LPC32xx SoC Real Time Clock controller
-
-Required properties:
-- compatible: must be "nxp,lpc3220-rtc"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: The RTC interrupt
-
-Example:
-
-	rtc@40024000 {
-		compatible = "nxp,lpc3220-rtc";
-		reg = <0x40024000 0x1000>;
-		interrupts = <52 0>;
-	};

diff --git a/Bindings/rtc/marvell,armada-380-rtc.yaml b/Bindings/rtc/marvell,armada-380-rtc.yaml
new file mode 100644
index 0000000..adf3ba0
--- /dev/null
+++ b/Bindings/rtc/marvell,armada-380-rtc.yaml

@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/marvell,armada-380-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RTC controller for the Armada 38x, 7K and 8K SoCs
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - marvell,armada-380-rtc
+      - marvell,armada-8k-rtc
+
+  reg:
+    items:
+      - description: RTC base address size
+      - description: Base address and size of SoC related registers
+
+  reg-names:
+    items:
+      - const: rtc
+      - const: rtc-soc
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    rtc@a3800 {
+        compatible = "marvell,armada-380-rtc";
+        reg = <0xa3800 0x20>, <0x184a0 0x0c>;
+        reg-names = "rtc", "rtc-soc";
+        interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+    };

diff --git a/Bindings/rtc/marvell,pxa-rtc.yaml b/Bindings/rtc/marvell,pxa-rtc.yaml
new file mode 100644
index 0000000..43d6868
--- /dev/null
+++ b/Bindings/rtc/marvell,pxa-rtc.yaml

@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/marvell,pxa-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PXA Real Time Clock
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    const: marvell,pxa-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: 1 Hz
+      - description: Alarm
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    rtc@40900000 {
+        compatible = "marvell,pxa-rtc";
+        reg = <0x40900000 0x3c>;
+        interrupts = <30>, <31>;
+    };

diff --git a/Bindings/rtc/maxim,ds1742.txt b/Bindings/rtc/maxim,ds1742.txt
deleted file mode 100644
index d0f937c..0000000
--- a/Bindings/rtc/maxim,ds1742.txt
+++ /dev/null

@@ -1,12 +0,0 @@
-* Maxim (Dallas) DS1742/DS1743 Real Time Clock
-
-Required properties:
-- compatible: Should contain "maxim,ds1742".
-- reg: Physical base address of the RTC and length of memory
-  mapped region.
-
-Example:
-	rtc: rtc@10000000 {
-		compatible = "maxim,ds1742";
-		reg = <0x10000000 0x800>;
-	};

diff --git a/Bindings/rtc/nxp,lpc1788-rtc.txt b/Bindings/rtc/nxp,lpc1788-rtc.txt
deleted file mode 100644
index 3c97bd1..0000000
--- a/Bindings/rtc/nxp,lpc1788-rtc.txt
+++ /dev/null

@@ -1,21 +0,0 @@
-NXP LPC1788 real-time clock
-
-The LPC1788 RTC provides calendar and clock functionality
-together with periodic tick and alarm interrupt support.
-
-Required properties:
-- compatible	: must contain "nxp,lpc1788-rtc"
-- reg		: Specifies base physical address and size of the registers.
-- interrupts	: A single interrupt specifier.
-- clocks	: Must contain clock specifiers for rtc and register clock
-- clock-names	: Must contain "rtc" and "reg"
-  See ../clocks/clock-bindings.txt for details.
-
-Example:
-rtc: rtc@40046000 {
-	compatible = "nxp,lpc1788-rtc";
-	reg = <0x40046000 0x1000>;
-	interrupts = <47>;
-	clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
-	clock-names = "rtc", "reg";
-};

diff --git a/Bindings/rtc/nxp,lpc1788-rtc.yaml b/Bindings/rtc/nxp,lpc1788-rtc.yaml
new file mode 100644
index 0000000..e88b847
--- /dev/null
+++ b/Bindings/rtc/nxp,lpc1788-rtc.yaml

@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nxp,lpc1788-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC1788 real-time clock
+
+description:
+  The LPC1788 RTC provides calendar and clock functionality
+  together with periodic tick and alarm interrupt support.
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    const: nxp,lpc1788-rtc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: RTC clock
+      - description: Register clock
+
+  clock-names:
+    items:
+      - const: rtc
+      - const: reg
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/lpc18xx-ccu.h>
+
+    rtc@40046000 {
+        compatible = "nxp,lpc1788-rtc";
+        reg = <0x40046000 0x1000>;
+        clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
+        clock-names = "rtc", "reg";
+        interrupts = <47>;
+    };

diff --git a/Bindings/rtc/orion-rtc.txt b/Bindings/rtc/orion-rtc.txt
deleted file mode 100644
index 3bf63ff..0000000
--- a/Bindings/rtc/orion-rtc.txt
+++ /dev/null

@@ -1,18 +0,0 @@
-* Mvebu Real Time Clock
-
-RTC controller for the Kirkwood, the Dove, the Armada 370 and the
-Armada XP SoCs
-
-Required properties:
-- compatible : Should be "marvell,orion-rtc"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: IRQ line for the RTC.
-
-Example:
-
-rtc@10300 {
-        compatible = "marvell,orion-rtc";
-        reg = <0xd0010300 0x20>;
-        interrupts = <50>;
-};

diff --git a/Bindings/rtc/pxa-rtc.txt b/Bindings/rtc/pxa-rtc.txt
deleted file mode 100644
index 8c6672a..0000000
--- a/Bindings/rtc/pxa-rtc.txt
+++ /dev/null

@@ -1,14 +0,0 @@
-* PXA RTC
-
-PXA specific RTC driver.
-
-Required properties:
-- compatible : Should be "marvell,pxa-rtc"
-
-Examples:
-
-rtc@40900000 {
-	compatible = "marvell,pxa-rtc";
-	reg = <0x40900000 0x3c>;
-	interrupts = <30 31>;
-};

diff --git a/Bindings/rtc/rtc-aspeed.txt b/Bindings/rtc/rtc-aspeed.txt
deleted file mode 100644
index 2e956b3..0000000
--- a/Bindings/rtc/rtc-aspeed.txt
+++ /dev/null

@@ -1,22 +0,0 @@
-ASPEED BMC RTC
-==============
-
-Required properties:
- - compatible: should be one of the following
-   * aspeed,ast2400-rtc for the ast2400
-   * aspeed,ast2500-rtc for the ast2500
-   * aspeed,ast2600-rtc for the ast2600
-
- - reg: physical base address of the controller and length of memory mapped
-   region
-
- - interrupts: The interrupt number
-
-Example:
-
-   rtc@1e781000 {
-           compatible = "aspeed,ast2400-rtc";
-           reg = <0x1e781000 0x18>;
-           interrupts = <22>;
-           status = "disabled";
-   };

diff --git a/Bindings/rtc/spear-rtc.txt b/Bindings/rtc/spear-rtc.txt
deleted file mode 100644
index fecf8e4..0000000
--- a/Bindings/rtc/spear-rtc.txt
+++ /dev/null

@@ -1,15 +0,0 @@
-* SPEAr RTC
-
-Required properties:
-- compatible : "st,spear600-rtc"
-- reg : Address range of the rtc registers
-- interrupt: Should contain the rtc interrupt number
-
-Example:
-
-	rtc@fc000000 {
-		compatible = "st,spear600-rtc";
-		reg = <0xfc000000 0x1000>;
-		interrupt-parent = <&vic1>;
-		interrupts = <12>;
-	};

diff --git a/Bindings/rtc/stmp3xxx-rtc.txt b/Bindings/rtc/stmp3xxx-rtc.txt
deleted file mode 100644
index fa6a942..0000000
--- a/Bindings/rtc/stmp3xxx-rtc.txt
+++ /dev/null

@@ -1,21 +0,0 @@
-* STMP3xxx/i.MX28 Time Clock controller
-
-Required properties:
-- compatible: should be one of the following.
-    * "fsl,stmp3xxx-rtc"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: rtc alarm interrupt
-
-Optional properties:
-- stmp,crystal-freq: override crystal frequency as determined from fuse bits.
-  Only <32000> and <32768> are possible for the hardware.  Use <0> for
-  "no crystal".
-
-Example:
-
-rtc@80056000 {
-	compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
-	reg = <0x80056000 2000>;
-	interrupts = <29>;
-};

diff --git a/Bindings/rtc/trivial-rtc.yaml b/Bindings/rtc/trivial-rtc.yaml
index c9e3c52..fffd759 100644
--- a/Bindings/rtc/trivial-rtc.yaml
+++ b/Bindings/rtc/trivial-rtc.yaml

@@ -24,6 +24,14 @@
       - abracon,abb5zes3
       # AB-RTCMC-32.768kHz-EOZ9: Real Time Clock/Calendar Module with I2C Interface
       - abracon,abeoz9
+      # ASPEED BMC ast2400 Real-time Clock
+      - aspeed,ast2400-rtc
+      # ASPEED BMC ast2500 Real-time Clock
+      - aspeed,ast2500-rtc
+      # ASPEED BMC ast2600 Real-time Clock
+      - aspeed,ast2600-rtc
+      # Conexant Digicolor Real Time Clock Controller
+      - cnxt,cx92755-rtc
       # I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output
       - dallas,ds1374
       # Dallas DS1672 Real-time Clock
@@ -38,19 +46,28 @@
       - epson,rx8025
       - epson,rx8035
       # I2C-BUS INTERFACE REAL TIME CLOCK MODULE with Battery Backed RAM
+      - epson,rx8111
       - epson,rx8571
       # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
       - epson,rx8581
+      # Android Goldfish Real-time Clock
+      - google,goldfish-rtc
       # Intersil ISL1208 Low Power RTC with Battery Backed SRAM
       - isil,isl1208
       # Intersil ISL1218 Low Power RTC with Battery Backed SRAM
       - isil,isl1218
+      # Mvebu Real-time Clock
+      - marvell,orion-rtc
+      # Maxim DS1742/DS1743 Real-time Clock
+      - maxim,ds1742
       # SPI-BUS INTERFACE REAL TIME CLOCK MODULE
       - maxim,mcp795
       # Real Time Clock Module with I2C-Bus
       - microcrystal,rv3029
       # Real Time Clock
       - microcrystal,rv8523
+      # NXP LPC32xx SoC Real-time Clock
+      - nxp,lpc3220-rtc
       # Real-time Clock Module
       - pericom,pt7c4338
       # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
@@ -67,6 +84,10 @@
       - ricoh,rv5c387a
       # 2-wire CMOS real-time clock
       - sii,s35390a
+      # ST SPEAr Real-time Clock
+      - st,spear600-rtc
+      # VIA/Wondermedia VT8500 Real-time Clock
+      - via,vt8500-rtc
       # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
       - whwave,sd3078
       # Xircom X1205 I2C RTC

diff --git a/Bindings/rtc/twl-rtc.txt b/Bindings/rtc/twl-rtc.txt
deleted file mode 100644
index 8f9a94f..0000000
--- a/Bindings/rtc/twl-rtc.txt
+++ /dev/null

@@ -1,11 +0,0 @@
-* Texas Instruments TWL4030/6030 RTC
-
-Required properties:
-- compatible : Should be "ti,twl4030-rtc"
-- interrupts : Should be the interrupt number.
-
-Example:
-	rtc {
-		compatible = "ti,twl4030-rtc";
-		interrupts = <11>;
-	};

diff --git a/Bindings/rtc/via,vt8500-rtc.txt b/Bindings/rtc/via,vt8500-rtc.txt
deleted file mode 100644
index 3c0484c..0000000
--- a/Bindings/rtc/via,vt8500-rtc.txt
+++ /dev/null

@@ -1,15 +0,0 @@
-VIA/Wondermedia VT8500 Realtime Clock Controller
------------------------------------------------------
-
-Required properties:
-- compatible : "via,vt8500-rtc"
-- reg : Should contain 1 register ranges(address and length)
-- interrupts : alarm interrupt
-
-Example:
-
-	rtc@d8100000 {
-		compatible = "via,vt8500-rtc";
-		reg = <0xd8100000 0x10000>;
-		interrupts = <48>;
-	};

diff --git a/Bindings/serial/actions,owl-uart.txt b/Bindings/serial/actions,owl-uart.txt
deleted file mode 100644
index aa873ea..0000000
--- a/Bindings/serial/actions,owl-uart.txt
+++ /dev/null

@@ -1,16 +0,0 @@
-Actions Semi Owl UART
-
-Required properties:
-- compatible :  "actions,s500-uart", "actions,owl-uart" for S500
-                "actions,s900-uart", "actions,owl-uart" for S900
-- reg        :  Offset and length of the register set for the device.
-- interrupts :  Should contain UART interrupt.
-
-
-Example:
-
-		uart3: serial@b0126000 {
-			compatible = "actions,s500-uart", "actions,owl-uart";
-			reg = <0xb0126000 0x1000>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-		};

diff --git a/Bindings/serial/actions,owl-uart.yaml b/Bindings/serial/actions,owl-uart.yaml
new file mode 100644
index 0000000..ab1c451
--- /dev/null
+++ b/Bindings/serial/actions,owl-uart.yaml

@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/actions,owl-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi Owl UART
+
+maintainers:
+  - Kanak Shilledar <kanakshilledar111@protonmail.com>
+
+allOf:
+  - $ref: serial.yaml
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - actions,s500-uart
+          - actions,s900-uart
+      - const: actions,owl-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/actions,s500-cmu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    uart0: serial@b0126000 {
+        compatible = "actions,s500-uart", "actions,owl-uart";
+        reg = <0xb0126000 0x1000>;
+        clocks = <&cmu CLK_UART0>;
+        interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+    };

diff --git a/Bindings/serial/amlogic,meson-uart.yaml b/Bindings/serial/amlogic,meson-uart.yaml
index 2e189e5..0565fb7 100644
--- a/Bindings/serial/amlogic,meson-uart.yaml
+++ b/Bindings/serial/amlogic,meson-uart.yaml

@@ -54,7 +54,9 @@
           - const: amlogic,meson-gx-uart
       - description: UART controller on S4 compatible SoCs
         items:
-          - const: amlogic,t7-uart
+          - enum:
+              - amlogic,a4-uart
+              - amlogic,t7-uart
           - const: amlogic,meson-s4-uart
 
   reg:

diff --git a/Bindings/serial/brcm,bcm2835-aux-uart.txt b/Bindings/serial/brcm,bcm2835-aux-uart.txt
deleted file mode 100644
index b5cc629..0000000
--- a/Bindings/serial/brcm,bcm2835-aux-uart.txt
+++ /dev/null

@@ -1,18 +0,0 @@
-* BCM2835 AUXILIAR UART
-
-Required properties:
-
-- compatible: "brcm,bcm2835-aux-uart"
-- reg: The base address of the UART register bank.
-- interrupts: A single interrupt specifier.
-- clocks: Clock driving the hardware; used to figure out the baud rate
-  divisor.
-
-Example:
-
-	uart1: serial@7e215040 {
-		compatible = "brcm,bcm2835-aux-uart";
-		reg = <0x7e215040 0x40>;
-		interrupts = <1 29>;
-		clocks = <&aux BCM2835_AUX_CLOCK_UART>;
-	};

diff --git a/Bindings/serial/brcm,bcm2835-aux-uart.yaml b/Bindings/serial/brcm,bcm2835-aux-uart.yaml
new file mode 100644
index 0000000..6b72459
--- /dev/null
+++ b/Bindings/serial/brcm,bcm2835-aux-uart.yaml

@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/brcm,bcm2835-aux-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835 AUXILIARY UART
+
+maintainers:
+  - Pratik Farkase <pratikfarkase94@gmail.com>
+  - Florian Fainelli <florian.fainelli@broadcom.com>
+  - Stefan Wahren <wahrenst@gmx.net>
+
+allOf:
+  - $ref: serial.yaml
+
+properties:
+  compatible:
+    const: brcm,bcm2835-aux-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835-aux.h>
+    serial@7e215040 {
+        compatible = "brcm,bcm2835-aux-uart";
+        reg = <0x7e215040 0x40>;
+        interrupts = <1 29>;
+        clocks = <&aux BCM2835_AUX_CLOCK_UART>;
+    };

diff --git a/Bindings/serial/cdns,uart.yaml b/Bindings/serial/cdns,uart.yaml
index 2129247..d7f047b 100644
--- a/Bindings/serial/cdns,uart.yaml
+++ b/Bindings/serial/cdns,uart.yaml

@@ -46,6 +46,9 @@
   power-domains:
     maxItems: 1
 
+  resets:
+    maxItems: 1
+
 required:
   - compatible
   - reg

diff --git a/Bindings/serial/fsl,s32-linflexuart.yaml b/Bindings/serial/fsl,s32-linflexuart.yaml
index 7a10555..4171f52 100644
--- a/Bindings/serial/fsl,s32-linflexuart.yaml
+++ b/Bindings/serial/fsl,s32-linflexuart.yaml

@@ -23,7 +23,9 @@
     oneOf:
       - const: fsl,s32v234-linflexuart
       - items:
-          - const: nxp,s32g2-linflexuart
+          - enum:
+              - nxp,s32g2-linflexuart
+              - nxp,s32g3-linflexuart
           - const: fsl,s32v234-linflexuart
 
   reg:

diff --git a/Bindings/serial/renesas,scif.yaml b/Bindings/serial/renesas,scif.yaml
index 4610a5b..f3a3eb2 100644
--- a/Bindings/serial/renesas,scif.yaml
+++ b/Bindings/serial/renesas,scif.yaml

@@ -68,6 +68,7 @@
               - renesas,scif-r8a779a0     # R-Car V3U
               - renesas,scif-r8a779f0     # R-Car S4-8
               - renesas,scif-r8a779g0     # R-Car V4H
+              - renesas,scif-r8a779h0     # R-Car V4M
           - const: renesas,rcar-gen4-scif # R-Car Gen4
           - const: renesas,scif           # generic SCIF compatible UART
 

diff --git a/Bindings/serial/st,stm32-uart.yaml b/Bindings/serial/st,stm32-uart.yaml
index 62f97da..2ed5261 100644
--- a/Bindings/serial/st,stm32-uart.yaml
+++ b/Bindings/serial/st,stm32-uart.yaml

@@ -73,6 +73,10 @@
     enum: [1, 2, 4, 8, 12, 14, 16]
     default: 8
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 allOf:
   - $ref: rs485.yaml#
   - $ref: serial.yaml#

diff --git a/Bindings/soc/qcom/qcom,pmic-glink.yaml b/Bindings/soc/qcom/qcom,pmic-glink.yaml
index 4310bae..4512390 100644
--- a/Bindings/soc/qcom/qcom,pmic-glink.yaml
+++ b/Bindings/soc/qcom/qcom,pmic-glink.yaml

@@ -58,20 +58,6 @@
 required:
   - compatible
 
-allOf:
-  - if:
-      not:
-        properties:
-          compatible:
-            contains:
-              enum:
-                - qcom,sm8450-pmic-glink
-                - qcom,sm8550-pmic-glink
-                - qcom,x1e80100-pmic-glink
-    then:
-      properties:
-        orientation-gpios: false
-
 additionalProperties: false
 
 examples:

diff --git a/Bindings/soc/qcom/qcom,wcnss.yaml b/Bindings/soc/qcom/qcom,wcnss.yaml
index 74bb92e..fd6db0c 100644
--- a/Bindings/soc/qcom/qcom,wcnss.yaml
+++ b/Bindings/soc/qcom/qcom,wcnss.yaml

@@ -116,8 +116,8 @@
 
             bluetooth {
                 compatible = "qcom,wcnss-bt";
-                /* BD address 00:11:22:33:44:55 */
-                local-bd-address = [ 55 44 33 22 11 00 ];
+                /* Updated by boot firmware (little-endian order) */
+                local-bd-address = [ 00 00 00 00 00 00 ];
             };
 
             wifi {

diff --git a/Bindings/soc/renesas/renesas,r9a09g057-sys.yaml b/Bindings/soc/renesas/renesas,r9a09g057-sys.yaml
new file mode 100644
index 0000000..ebbf0c9
--- /dev/null
+++ b/Bindings/soc/renesas/renesas,r9a09g057-sys.yaml

@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/renesas/renesas,r9a09g057-sys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2H(P) System Controller (SYS)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  The RZ/V2H(P) SYS (System Controller) controls the overall
+  configuration of the LSI and supports the following functions,
+  - Trust zone control
+  - Extend access by specific masters to address beyond 4GB space
+  - GBETH configuration
+  - Control of settings and states of SRAM/PCIe/CM33/CA55/CR8/xSPI/ADC/TSU
+  - LSI version
+  - WDT stop control
+  - General registers
+
+properties:
+  compatible:
+    const: renesas,r9a09g057-sys
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    sys: system-controller@10430000 {
+        compatible = "renesas,r9a09g057-sys";
+        reg = <0x10430000 0x10000>;
+        clocks = <&cpg 1>;
+        resets = <&cpg 1>;
+    };

diff --git a/Bindings/soc/renesas/renesas.yaml b/Bindings/soc/renesas/renesas.yaml
index c1ce4da..09d3ce9 100644
--- a/Bindings/soc/renesas/renesas.yaml
+++ b/Bindings/soc/renesas/renesas.yaml

@@ -513,6 +513,14 @@
               - renesas,rzv2mevk2   # RZ/V2M Eval Board v2.0
           - const: renesas,r9a09g011
 
+      - description: RZ/V2H(P) (R9A09G057)
+        items:
+          - enum:
+              - renesas,r9a09g057h41 # RZ/V2H
+              - renesas,r9a09g057h42 # RZ/V2H with Mali-G31 support
+              - renesas,r9a09g057h44 # RZ/V2HP with Mali-G31 + Mali-C55 support
+          - const: renesas,r9a09g057
+
 additionalProperties: true
 
 ...

diff --git a/Bindings/soc/samsung/samsung,exynos-sysreg.yaml b/Bindings/soc/samsung/samsung,exynos-sysreg.yaml
index c0c6ce8..3ca2205 100644
--- a/Bindings/soc/samsung/samsung,exynos-sysreg.yaml
+++ b/Bindings/soc/samsung/samsung,exynos-sysreg.yaml

@@ -15,6 +15,7 @@
       - items:
           - enum:
               - google,gs101-apm-sysreg
+              - google,gs101-hsi2-sysreg
               - google,gs101-peric0-sysreg
               - google,gs101-peric1-sysreg
               - samsung,exynos3-sysreg
@@ -72,6 +73,7 @@
         compatible:
           contains:
             enum:
+              - google,gs101-hsi2-sysreg
               - google,gs101-peric0-sysreg
               - google,gs101-peric1-sysreg
               - samsung,exynos850-cmgp-sysreg

diff --git a/Bindings/soc/tegra/nvidia,tegra20-pmc.yaml b/Bindings/soc/tegra/nvidia,tegra20-pmc.yaml
index b86f6f5..7140c31 100644
--- a/Bindings/soc/tegra/nvidia,tegra20-pmc.yaml
+++ b/Bindings/soc/tegra/nvidia,tegra20-pmc.yaml

@@ -365,9 +365,9 @@
 additionalProperties: false
 
 dependencies:
-  "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
-  "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"]
-  "nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"]
+  nvidia,suspend-mode: ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
+  nvidia,core-pwr-off-time: ["nvidia,core-pwr-good-time"]
+  nvidia,cpu-pwr-off-time: ["nvidia,cpu-pwr-good-time"]
 
 examples:
   - |

diff --git a/Bindings/sound/davinci-mcbsp.txt b/Bindings/sound/davinci-mcbsp.txt
deleted file mode 100644
index 3ffc256..0000000
--- a/Bindings/sound/davinci-mcbsp.txt
+++ /dev/null

@@ -1,50 +0,0 @@
-Texas Instruments DaVinci McBSP module
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-This binding describes the "Multi-channel Buffered Serial Port" (McBSP)
-audio interface found in some TI DaVinci processors like the OMAP-L138 or AM180x.
-
-
-Required properties:
-~~~~~~~~~~~~~~~~~~~~
-- compatible :
-        "ti,da850-mcbsp" : for DA850, AM180x and OPAM-L138 platforms
-
-- reg : physical base address and length of the controller memory mapped
-        region(s).
-- reg-names : Should contain:
-        * "mpu" for the main registers (required).
-        * "dat" for the data FIFO (optional).
-
-- dmas: three element list of DMA controller phandles, DMA request line and
-	TC channel ordered triplets.
-- dma-names: identifier string for each DMA request line in the dmas property.
-	These strings correspond 1:1 with the ordered pairs in dmas. The dma
-	identifiers must be "rx" and "tx".
-
-Optional properties:
-~~~~~~~~~~~~~~~~~~~~
-- interrupts : Interrupt numbers for McBSP
-- interrupt-names : Known interrupt names are "rx" and "tx"
-
-- pinctrl-0: Should specify pin control group used for this controller.
-- pinctrl-names: Should contain only one value - "default", for more details
-        please refer to pinctrl-bindings.txt
-
-Example (AM1808):
-~~~~~~~~~~~~~~~~~
-
-mcbsp0: mcbsp@1d10000 {
-	compatible = "ti,da850-mcbsp";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp0_pins>;
-
-	reg = 	<0x00110000 0x1000>,
-		<0x00310000 0x1000>;
-	reg-names = "mpu", "dat";
-	interrupts = <97 98>;
-	interrupt-names = "rx", "tx";
-	dmas = <&edma0 3 1
-		&edma0 2 1>;
-	dma-names = "tx", "rx";
-};

diff --git a/Bindings/sound/davinci-mcbsp.yaml b/Bindings/sound/davinci-mcbsp.yaml
new file mode 100644
index 0000000..4fa6770
--- /dev/null
+++ b/Bindings/sound/davinci-mcbsp.yaml

@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/davinci-mcbsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: McBSP Controller for TI SoCs
+
+maintainers:
+  - Bastien Curutchet <bastien.curutchet@bootlin.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,da850-mcbsp
+
+  reg:
+    minItems: 1
+    items:
+      - description: CFG registers
+      - description: data registers
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: mpu
+      - const: dat
+
+  dmas:
+    items:
+      - description: transmission DMA channel
+      - description: reception DMA channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interrupts:
+    items:
+      - description: RX interrupt
+      - description: TX interrupt
+
+  interrupt-names:
+    items:
+      - const: rx
+      - const: tx
+
+  clocks:
+    minItems: 1
+    items:
+      - description: functional clock
+      - description: external input clock for sample rate generator.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: fck
+      - const: clks
+
+  power-domains:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  ti,T1-framing-tx:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If the property is present, tx data delay is set to 2 bit clock periods.
+      McBSP will insert a blank period (high-impedance period) before the first
+      data bit. This can be used to interface to T1-framing devices.
+
+  ti,T1-framing-rx:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If the property is present, rx data delay is set to 2 bit clock periods.
+      McBSP will discard the bit preceding the data stream (called framing bit).
+      This can be used to interface to T1-framing devices.
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - reg-names
+  - dmas
+  - dma-names
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mcbsp0@1d10000 {
+      #sound-dai-cells = <0>;
+      compatible = "ti,da850-mcbsp";
+      pinctrl-names = "default";
+      pinctrl-0 = <&mcbsp0_pins>;
+
+      reg = <0x111000 0x1000>,
+            <0x311000 0x1000>;
+      reg-names = "mpu", "dat";
+      interrupts = <97>, <98>;
+      interrupt-names = "rx", "tx";
+      dmas = <&edma0 3 1>,
+             <&edma0 2 1>;
+      dma-names = "tx", "rx";
+
+      clocks = <&psc1 14>;
+    };

diff --git a/Bindings/sound/fsl,audmix.txt b/Bindings/sound/fsl,audmix.txt
deleted file mode 100644
index 840b7e0..0000000
--- a/Bindings/sound/fsl,audmix.txt
+++ /dev/null

@@ -1,50 +0,0 @@
-NXP Audio Mixer (AUDMIX).
-
-The Audio Mixer is a on-chip functional module that allows mixing of two
-audio streams into a single audio stream. Audio Mixer has two input serial
-audio interfaces. These are driven by two Synchronous Audio interface
-modules (SAI). Each input serial interface carries 8 audio channels in its
-frame in TDM manner. Mixer mixes audio samples of corresponding channels
-from two interfaces into a single sample. Before mixing, audio samples of
-two inputs can be attenuated based on configuration. The output of the
-Audio Mixer is also a serial audio interface. Like input interfaces it has
-the same TDM frame format. This output is used to drive the serial DAC TDM
-interface of audio codec and also sent to the external pins along with the
-receive path of normal audio SAI module for readback by the CPU.
-
-The output of Audio Mixer can be selected from any of the three streams
- - serial audio input 1
- - serial audio input 2
- - mixed audio
-
-Mixing operation is independent of audio sample rate but the two audio
-input streams must have same audio sample rate with same number of channels
-in TDM frame to be eligible for mixing.
-
-Device driver required properties:
-=================================
-  - compatible		: Compatible list, contains "fsl,imx8qm-audmix"
-
-  - reg			: Offset and length of the register set for the device.
-
-  - clocks		: Must contain an entry for each entry in clock-names.
-
-  - clock-names		: Must include the "ipg" for register access.
-
-  - power-domains	: Must contain the phandle to AUDMIX power domain node
-
-  - dais		: Must contain a list of phandles to AUDMIX connected
-			  DAIs. The current implementation requires two phandles
-			  to SAI interfaces to be provided, the first SAI in the
-			  list being used to route the AUDMIX output.
-
-Device driver configuration example:
-======================================
-  audmix: audmix@59840000 {
-    compatible = "fsl,imx8qm-audmix";
-    reg = <0x0 0x59840000 0x0 0x10000>;
-    clocks = <&clk IMX8QXP_AUD_AUDMIX_IPG>;
-    clock-names = "ipg";
-    power-domains = <&pd_audmix>;
-    dais = <&sai4>, <&sai5>;
-  };

diff --git a/Bindings/sound/fsl,audmix.yaml b/Bindings/sound/fsl,audmix.yaml
new file mode 100644
index 0000000..9413b90
--- /dev/null
+++ b/Bindings/sound/fsl,audmix.yaml

@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,audmix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Audio Mixer (AUDMIX).
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  The Audio Mixer is a on-chip functional module that allows mixing of two
+  audio streams into a single audio stream. Audio Mixer has two input serial
+  audio interfaces. These are driven by two Synchronous Audio interface
+  modules (SAI). Each input serial interface carries 8 audio channels in its
+  frame in TDM manner. Mixer mixes audio samples of corresponding channels
+  from two interfaces into a single sample. Before mixing, audio samples of
+  two inputs can be attenuated based on configuration. The output of the
+  Audio Mixer is also a serial audio interface. Like input interfaces it has
+  the same TDM frame format. This output is used to drive the serial DAC TDM
+  interface of audio codec and also sent to the external pins along with the
+  receive path of normal audio SAI module for readback by the CPU.
+
+  The output of Audio Mixer can be selected from any of the three streams
+    - serial audio input 1
+    - serial audio input 2
+    - mixed audio
+
+  Mixing operation is independent of audio sample rate but the two audio
+  input streams must have same audio sample rate with same number of channels
+  in TDM frame to be eligible for mixing.
+
+properties:
+  compatible:
+    const: fsl,imx8qm-audmix
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ipg
+
+  power-domains:
+    maxItems: 1
+
+  dais:
+    description: contain a list of phandles to AUDMIX connected DAIs.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 2
+    items:
+      - description: the AUDMIX output
+        maxItems: 1
+      - description: serial audio input 1
+        maxItems: 1
+      - description: serial audio input 2
+        maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - dais
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    audmix@59840000 {
+      compatible = "fsl,imx8qm-audmix";
+      reg = <0x59840000 0x10000>;
+      clocks = <&amix_lpcg 0>;
+      clock-names = "ipg";
+      power-domains = <&pd_audmix>;
+      dais = <&sai4>, <&sai5>;
+    };

diff --git a/Bindings/sound/fsl,esai.txt b/Bindings/sound/fsl,esai.txt
deleted file mode 100644
index 90112ca..0000000
--- a/Bindings/sound/fsl,esai.txt
+++ /dev/null

@@ -1,68 +0,0 @@
-Freescale Enhanced Serial Audio Interface (ESAI) Controller
-
-The Enhanced Serial Audio Interface (ESAI) provides a full-duplex serial port
-for serial communication with a variety of serial devices, including industry
-standard codecs, Sony/Phillips Digital Interface (S/PDIF) transceivers, and
-other DSPs. It has up to six transmitters and four receivers.
-
-Required properties:
-
-  - compatible		: Compatible list, should contain one of the following
-			  compatibles:
-			  "fsl,imx35-esai",
-			  "fsl,vf610-esai",
-			  "fsl,imx6ull-esai",
-			  "fsl,imx8qm-esai",
-
-  - reg			: Offset and length of the register set for the device.
-
-  - interrupts		: Contains the spdif interrupt.
-
-  - dmas		: Generic dma devicetree binding as described in
-			  Documentation/devicetree/bindings/dma/dma.txt.
-
-  - dma-names		: Two dmas have to be defined, "tx" and "rx".
-
-  - clocks		: Contains an entry for each entry in clock-names.
-
-  - clock-names		: Includes the following entries:
-	"core"		  The core clock used to access registers
-	"extal"		  The esai baud clock for esai controller used to
-			  derive HCK, SCK and FS.
-	"fsys"		  The system clock derived from ahb clock used to
-			  derive HCK, SCK and FS.
-	"spba"		  The spba clock is required when ESAI is placed as a
-			  bus slave of the Shared Peripheral Bus and when two
-			  or more bus masters (CPU, DMA or DSP) try to access
-			  it. This property is optional depending on the SoC
-			  design.
-
-  - fsl,fifo-depth	: The number of elements in the transmit and receive
-			  FIFOs. This number is the maximum allowed value for
-			  TFCR[TFWM] or RFCR[RFWM].
-
-  - fsl,esai-synchronous: This is a boolean property. If present, indicating
-			  that ESAI would work in the synchronous mode, which
-			  means all the settings for Receiving would be
-			  duplicated from Transmission related registers.
-
-Optional properties:
-
-  - big-endian		: If this property is absent, the native endian mode
-			  will be in use as default, or the big endian mode
-			  will be in use for all the device registers.
-
-Example:
-
-esai: esai@2024000 {
-	compatible = "fsl,imx35-esai";
-	reg = <0x02024000 0x4000>;
-	interrupts = <0 51 0x04>;
-	clocks = <&clks 208>, <&clks 118>, <&clks 208>;
-	clock-names = "core", "extal", "fsys";
-	dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
-	dma-names = "rx", "tx";
-	fsl,fifo-depth = <128>;
-	fsl,esai-synchronous;
-	big-endian;
-};

diff --git a/Bindings/sound/fsl,esai.yaml b/Bindings/sound/fsl,esai.yaml
new file mode 100644
index 0000000..f99ed20
--- /dev/null
+++ b/Bindings/sound/fsl,esai.yaml

@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,esai.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Enhanced Serial Audio Interface (ESAI) Controller
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The Enhanced Serial Audio Interface (ESAI) provides a full-duplex serial port
+  for serial communication with a variety of serial devices, including industry
+  standard codecs, Sony/Phillips Digital Interface (S/PDIF) transceivers, and
+  other DSPs. It has up to six transmitters and four receivers.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx35-esai
+      - fsl,imx6ull-esai
+      - fsl,imx8qm-esai
+      - fsl,vf610-esai
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    items:
+      - description:
+          The core clock used to access registers.
+      - description:
+          The esai baud clock for esai controller used to
+          derive HCK, SCK and FS.
+      - description:
+          The system clock derived from ahb clock used to
+          derive HCK, SCK and FS.
+      - description:
+          The spba clock is required when ESAI is placed as a
+          bus slave of the Shared Peripheral Bus and when two
+          or more bus masters (CPU, DMA or DSP) try to access
+          it. This property is optional depending on the SoC
+          design.
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: core
+      - const: extal
+      - const: fsys
+      - const: spba
+
+  dmas:
+    minItems: 2
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  fsl,fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 64
+    description:
+      The number of elements in the transmit and receive
+      FIFOs. This number is the maximum allowed value for
+      TFCR[TFWM] or RFCR[RFWM].
+
+  fsl,esai-synchronous:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      This is a boolean property. If present, indicating
+      that ESAI would work in the synchronous mode, which
+      means all the settings for Receiving would be
+      duplicated from Transmission related registers.
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If this property is absent, the native endian mode
+      will be in use as default, or the big endian mode
+      will be in use for all the device registers.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: dai-common.yaml#
+
+examples:
+  - |
+    esai@2024000 {
+      compatible = "fsl,imx35-esai";
+      reg = <0x02024000 0x4000>;
+      interrupts = <0 51 0x04>;
+      clocks = <&clks 208>, <&clks 118>, <&clks 208>;
+      clock-names = "core", "extal", "fsys";
+      dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
+      dma-names = "rx", "tx";
+      fsl,fifo-depth = <128>;
+      fsl,esai-synchronous;
+      big-endian;
+    };

diff --git a/Bindings/sound/fsl,imx-asrc.yaml b/Bindings/sound/fsl,imx-asrc.yaml
index bfef2fc..76aa1f2 100644
--- a/Bindings/sound/fsl,imx-asrc.yaml
+++ b/Bindings/sound/fsl,imx-asrc.yaml

@@ -74,6 +74,9 @@
       - const: asrck_f
       - const: spba
 
+  power-domains:
+    maxItems: 1
+
   fsl,asrc-rate:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: The mutual sample rate used by DPCM Back Ends
@@ -131,6 +134,17 @@
       properties:
         fsl,asrc-clk-map: false
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-asrc
+              - fsl,imx8qxp-asrc
+    then:
+      required:
+        - power-domains
+
 additionalProperties: false
 
 examples:

diff --git a/Bindings/sound/fsl,imx-audio-spdif.yaml b/Bindings/sound/fsl,imx-audio-spdif.yaml
new file mode 100644
index 0000000..5fc543d
--- /dev/null
+++ b/Bindings/sound/fsl,imx-audio-spdif.yaml

@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,imx-audio-spdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX audio complex with S/PDIF transceiver
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx-sabreauto-spdif
+              - fsl,imx6sx-sdb-spdif
+          - const: fsl,imx-audio-spdif
+      - enum:
+          - fsl,imx-audio-spdif
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+  spdif-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the i.MX S/PDIF controller
+
+  spdif-out:
+    type: boolean
+    description:
+      If present, the transmitting function of S/PDIF will be enabled,
+      indicating there's a physical S/PDIF out connector or jack on the
+      board or it's connecting to some other IP block, such as an HDMI
+      encoder or display-controller.
+
+  spdif-in:
+    type: boolean
+    description:
+      If present, the receiving function of S/PDIF will be enabled,
+      indicating there is a physical S/PDIF in connector/jack on the board.
+
+required:
+  - compatible
+  - model
+  - spdif-controller
+
+anyOf:
+  - required:
+      - spdif-in
+  - required:
+      - spdif-out
+
+additionalProperties: false
+
+examples:
+  - |
+    sound-spdif {
+        compatible = "fsl,imx-audio-spdif";
+        model = "imx-spdif";
+        spdif-controller = <&spdif>;
+        spdif-out;
+        spdif-in;
+    };

diff --git a/Bindings/sound/fsl,sai.yaml b/Bindings/sound/fsl,sai.yaml
index 2456d95..a5d9c24 100644
--- a/Bindings/sound/fsl,sai.yaml
+++ b/Bindings/sound/fsl,sai.yaml

@@ -81,14 +81,12 @@
 
   dmas:
     minItems: 1
-    items:
-      - description: DMA controller phandle and request line for RX
-      - description: DMA controller phandle and request line for TX
+    maxItems: 2
 
   dma-names:
     minItems: 1
     items:
-      - const: rx
+      - enum: [ rx, tx ]
       - const: tx
 
   interrupts:

diff --git a/Bindings/sound/fsl,spdif.yaml b/Bindings/sound/fsl,spdif.yaml
index 1d64e83..204f361 100644
--- a/Bindings/sound/fsl,spdif.yaml
+++ b/Bindings/sound/fsl,spdif.yaml

@@ -31,7 +31,10 @@
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: Combined or receive interrupt
+      - description: Transmit interrupt
 
   dmas:
     items:
@@ -86,6 +89,9 @@
       registers. Set this flag for HCDs with big endian descriptors and big
       endian registers.
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -97,6 +103,33 @@
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx8qm-spdif
+            - fsl,imx8qxp-spdif
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-spdif
+              - fsl,imx8qxp-spdif
+    then:
+      required:
+        - power-domains
+
 examples:
   - |
     spdif@2004000 {

diff --git a/Bindings/sound/fsl,ssi.txt b/Bindings/sound/fsl,ssi.txt
deleted file mode 100644
index 7e15a85..0000000
--- a/Bindings/sound/fsl,ssi.txt
+++ /dev/null

@@ -1,87 +0,0 @@
-Freescale Synchronous Serial Interface
-
-The SSI is a serial device that communicates with audio codecs.  It can
-be programmed in AC97, I2S, left-justified, or right-justified modes.
-
-Required properties:
-- compatible:       Compatible list, should contain one of the following
-                    compatibles:
-                      fsl,mpc8610-ssi
-                      fsl,imx51-ssi
-                      fsl,imx35-ssi
-                      fsl,imx21-ssi
-- cell-index:       The SSI, <0> = SSI1, <1> = SSI2, and so on.
-- reg:              Offset and length of the register set for the device.
-- interrupts:       <a b> where a is the interrupt number and b is a
-                    field that represents an encoding of the sense and
-                    level information for the interrupt.  This should be
-                    encoded based on the information in section 2)
-                    depending on the type of interrupt controller you
-                    have.
-- fsl,fifo-depth:   The number of elements in the transmit and receive FIFOs.
-                    This number is the maximum allowed value for SFCSR[TFWM0].
- - clocks:          "ipg" - Required clock for the SSI unit
-                    "baud" - Required clock for SSI master mode. Otherwise this
-		      clock is not used
-
-Required are also ac97 link bindings if ac97 is used. See
-Documentation/devicetree/bindings/sound/soc-ac97link.txt for the necessary
-bindings.
-
-Optional properties:
-- codec-handle:     Phandle to a 'codec' node that defines an audio
-                    codec connected to this SSI.  This node is typically
-                    a child of an I2C or other control node.
-- fsl,fiq-stream-filter: Bool property. Disabled DMA and use FIQ instead to
-		    filter the codec stream. This is necessary for some boards
-		    where an incompatible codec is connected to this SSI, e.g.
-		    on pca100 and pcm043.
-- dmas:		    Generic dma devicetree binding as described in
-		    Documentation/devicetree/bindings/dma/dma.txt.
-- dma-names:	    Two dmas have to be defined, "tx" and "rx", if fsl,imx-fiq
-		    is not defined.
-- fsl,mode:         The operating mode for the AC97 interface only.
-                    "ac97-slave" - AC97 mode, SSI is clock slave
-                    "ac97-master" - AC97 mode, SSI is clock master
-- fsl,ssi-asynchronous:
-                    If specified, the SSI is to be programmed in asynchronous
-                    mode.  In this mode, pins SRCK, STCK, SRFS, and STFS must
-                    all be connected to valid signals.  In synchronous mode,
-                    SRCK and SRFS are ignored.  Asynchronous mode allows
-                    playback and capture to use different sample sizes and
-                    sample rates.  Some drivers may require that SRCK and STCK
-                    be connected together, and SRFS and STFS be connected
-                    together.  This would still allow different sample sizes,
-                    but not different sample rates.
-- fsl,playback-dma: Phandle to a node for the DMA channel to use for
-                    playback of audio.  This is typically dictated by SOC
-                    design.  See the notes below.
-                    Only used on Power Architecture.
-- fsl,capture-dma:  Phandle to a node for the DMA channel to use for
-                    capture (recording) of audio.  This is typically dictated
-                    by SOC design.  See the notes below.
-                    Only used on Power Architecture.
-
-Child 'codec' node required properties:
-- compatible:       Compatible list, contains the name of the codec
-
-Child 'codec' node optional properties:
-- clock-frequency:  The frequency of the input clock, which typically comes
-                    from an on-board dedicated oscillator.
-
-Notes on fsl,playback-dma and fsl,capture-dma:
-
-On SOCs that have an SSI, specific DMA channels are hard-wired for playback
-and capture.  On the MPC8610, for example, SSI1 must use DMA channel 0 for
-playback and DMA channel 1 for capture.  SSI2 must use DMA channel 2 for
-playback and DMA channel 3 for capture.  The developer can choose which
-DMA controller to use, but the channels themselves are hard-wired.  The
-purpose of these two properties is to represent this hardware design.
-
-The device tree nodes for the DMA channels that are referenced by
-"fsl,playback-dma" and "fsl,capture-dma" must be marked as compatible with
-"fsl,ssi-dma-channel".  The SOC-specific compatible string (e.g.
-"fsl,mpc8610-dma-channel") can remain.  If these nodes are left as
-"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel", then the generic Elo DMA
-drivers (fsldma) will attempt to use them, and it will conflict with the
-sound drivers.

diff --git a/Bindings/sound/fsl,ssi.yaml b/Bindings/sound/fsl,ssi.yaml
new file mode 100644
index 0000000..4ab10cd
--- /dev/null
+++ b/Bindings/sound/fsl,ssi.yaml

@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,ssi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Synchronous Serial Interface
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+description:
+  Notes on fsl,playback-dma and fsl,capture-dma
+  On SOCs that have an SSI, specific DMA channels are hard-wired for playback
+  and capture.  On the MPC8610, for example, SSI1 must use DMA channel 0 for
+  playback and DMA channel 1 for capture.  SSI2 must use DMA channel 2 for
+  playback and DMA channel 3 for capture.  The developer can choose which
+  DMA controller to use, but the channels themselves are hard-wired.  The
+  purpose of these two properties is to represent this hardware design.
+
+  The device tree nodes for the DMA channels that are referenced by
+  "fsl,playback-dma" and "fsl,capture-dma" must be marked as compatible with
+  "fsl,ssi-dma-channel".  The SOC-specific compatible string (e.g.
+  "fsl,mpc8610-dma-channel") can remain.  If these nodes are left as
+  "fsl,elo-dma-channel" or "fsl,eloplus-dma-channel", then the generic Elo DMA
+  drivers (fsldma) will attempt to use them, and it will conflict with the
+  sound drivers.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx50-ssi
+              - fsl,imx53-ssi
+          - const: fsl,imx51-ssi
+          - const: fsl,imx21-ssi
+      - items:
+          - enum:
+              - fsl,imx25-ssi
+              - fsl,imx27-ssi
+              - fsl,imx35-ssi
+              - fsl,imx51-ssi
+          - const: fsl,imx21-ssi
+      - items:
+          - enum:
+              - fsl,imx6q-ssi
+              - fsl,imx6sl-ssi
+              - fsl,imx6sx-ssi
+          - const: fsl,imx51-ssi
+      - items:
+          - const: fsl,imx21-ssi
+      - items:
+          - const: fsl,mpc8610-ssi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The ipg clock for register access
+      - description: clock for SSI master mode
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: baud
+    minItems: 1
+
+  dmas:
+    oneOf:
+      - items:
+          - description: DMA controller phandle and request line for RX
+          - description: DMA controller phandle and request line for TX
+      - items:
+          - description: DMA controller phandle and request line for RX0
+          - description: DMA controller phandle and request line for TX0
+          - description: DMA controller phandle and request line for RX1
+          - description: DMA controller phandle and request line for TX1
+
+  dma-names:
+    oneOf:
+      - items:
+          - const: rx
+          - const: tx
+      - items:
+          - const: rx0
+          - const: tx0
+          - const: rx1
+          - const: tx1
+
+  "#sound-dai-cells":
+    const: 0
+    description: optional, some dts node didn't add it.
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+    description: The SSI index
+
+  ac97-gpios:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: Please refer to soc-ac97link.txt
+
+  codec-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to a 'codec' node that defines an audio
+      codec connected to this SSI.  This node is typically
+      a child of an I2C or other control node.
+
+  fsl,fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The number of elements in the transmit and receive FIFOs.
+      This number is the maximum allowed value for SFCSR[TFWM0].
+    enum: [8, 15]
+
+  fsl,fiq-stream-filter:
+    type: boolean
+    description:
+      Disabled DMA and use FIQ instead to filter the codec stream.
+      This is necessary for some boards where an incompatible codec
+      is connected to this SSI, e.g. on pca100 and pcm043.
+
+  fsl,mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ ac97-slave, ac97-master, i2s-slave, i2s-master,
+            lj-slave, lj-master, rj-slave, rj-master ]
+    description: |
+      "ac97-slave" - AC97 mode, SSI is clock slave
+      "ac97-master" - AC97 mode, SSI is clock master
+      "i2s-slave" - I2S mode, SSI is clock slave
+      "i2s-master" - I2S mode, SSI is clock master
+      "lj-slave" - Left justified mode, SSI is clock slave
+      "lj-master" - Left justified mode, SSI is clock master
+      "rj-slave" - Right justified mode, SSI is clock slave
+      "rj-master" - Right justified mode, SSI is clock master
+
+  fsl,ssi-asynchronous:
+    type: boolean
+    description: If specified, the SSI is to be programmed in asynchronous
+      mode.  In this mode, pins SRCK, STCK, SRFS, and STFS must
+      all be connected to valid signals.  In synchronous mode,
+      SRCK and SRFS are ignored.  Asynchronous mode allows
+      playback and capture to use different sample sizes and
+      sample rates.  Some drivers may require that SRCK and STCK
+      be connected together, and SRFS and STFS be connected
+      together.  This would still allow different sample sizes,
+      but not different sample rates.
+
+  fsl,playback-dma:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to a node for the DMA channel to use for
+      playback of audio.  This is typically dictated by SOC
+      design. Only used on Power Architecture.
+
+  fsl,capture-dma:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to a node for the DMA channel to use for
+      capture (recording) of audio.  This is typically dictated
+      by SOC design. Only used on Power Architecture.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - fsl,fifo-depth
+
+allOf:
+  - $ref: dai-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    ssi@2028000 {
+        compatible = "fsl,imx6q-ssi", "fsl,imx51-ssi";
+        reg = <0x02028000 0x4000>;
+        interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_SSI1_IPG>,
+                 <&clks IMX6QDL_CLK_SSI1>;
+        clock-names = "ipg", "baud";
+        dmas = <&sdma 37 1 0>, <&sdma 38 1 0>;
+        dma-names = "rx", "tx";
+        #sound-dai-cells = <0>;
+        fsl,fifo-depth = <15>;
+    };

diff --git a/Bindings/sound/fsl-asoc-card.txt b/Bindings/sound/fsl-asoc-card.txt
deleted file mode 100644
index 4e8dbc5..0000000
--- a/Bindings/sound/fsl-asoc-card.txt
+++ /dev/null

@@ -1,117 +0,0 @@
-Freescale Generic ASoC Sound Card with ASRC support
-
-The Freescale Generic ASoC Sound Card can be used, ideally, for all Freescale
-SoCs connecting with external CODECs.
-
-The idea of this generic sound card is a bit like ASoC Simple Card. However,
-for Freescale SoCs (especially those released in recent years), most of them
-have ASRC (Documentation/devicetree/bindings/sound/fsl,asrc.txt) inside. And
-this is a specific feature that might be painstakingly controlled and merged
-into the Simple Card.
-
-So having this generic sound card allows all Freescale SoC users to benefit
-from the simplification of a new card support and the capability of the wide
-sample rates support through ASRC.
-
-Note: The card is initially designed for those sound cards who use AC'97, I2S
-      and PCM DAI formats. However, it'll be also possible to support those non
-      AC'97/I2S/PCM type sound cards, such as S/PDIF audio and HDMI audio, as
-      long as the driver has been properly upgraded.
-
-
-The compatible list for this generic sound card currently:
- "fsl,imx-audio-ac97"
-
- "fsl,imx-audio-cs42888"
-
- "fsl,imx-audio-cs427x"
- (compatible with CS4271 and CS4272)
-
- "fsl,imx-audio-wm8962"
-
- "fsl,imx-audio-sgtl5000"
- (compatible with Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt)
-
- "fsl,imx-audio-wm8960"
-
- "fsl,imx-audio-mqs"
-
- "fsl,imx-audio-wm8524"
-
- "fsl,imx-audio-tlv320aic32x4"
-
- "fsl,imx-audio-tlv320aic31xx"
-
- "fsl,imx-audio-si476x"
-
- "fsl,imx-audio-wm8958"
-
- "fsl,imx-audio-nau8822"
-
-Required properties:
-
-  - compatible		: Contains one of entries in the compatible list.
-
-  - model		: The user-visible name of this sound complex
-
-  - audio-cpu		: The phandle of an CPU DAI controller
-
-  - audio-codec		: The phandle of an audio codec
-
-Optional properties:
-
-  - audio-asrc		: The phandle of ASRC. It can be absent if there's no
-			  need to add ASRC support via DPCM.
-
-  - audio-routing	: A list of the connections between audio components.
-			  Each entry is a pair of strings, the first being the
-			  connection's sink, the second being the connection's
-			  source. There're a few pre-designed board connectors:
-			   * Line Out Jack
-			   * Line In Jack
-			   * Headphone Jack
-			   * Mic Jack
-			   * Ext Spk
-			   * AMIC (stands for Analog Microphone Jack)
-			   * DMIC (stands for Digital Microphone Jack)
-
-			  Note: The "Mic Jack" and "AMIC" are redundant while
-			        coexisting in order to support the old bindings
-				of wm8962 and sgtl5000.
-
-  - hp-det-gpio		: The GPIO that detect headphones are plugged in
-  - mic-det-gpio	: The GPIO that detect microphones are plugged in
-  - bitclock-master	: Indicates dai-link bit clock master; for details see simple-card.yaml.
-  - frame-master	: Indicates dai-link frame master; for details see simple-card.yaml.
-  - dai-format		: audio format, for details see simple-card.yaml.
-  - frame-inversion	: dai-link uses frame clock inversion, for details see simple-card.yaml.
-  - bitclock-inversion	: dai-link uses bit clock inversion, for details see simple-card.yaml.
-  - mclk-id		: main clock id, specific for each card configuration.
-
-Optional unless SSI is selected as a CPU DAI:
-
-  - mux-int-port	: The internal port of the i.MX audio muxer (AUDMUX)
-
-  - mux-ext-port	: The external port of the i.MX audio muxer
-
-Example:
-sound-cs42888 {
-	compatible = "fsl,imx-audio-cs42888";
-	model = "cs42888-audio";
-	audio-cpu = <&esai>;
-	audio-asrc = <&asrc>;
-	audio-codec = <&cs42888>;
-	audio-routing =
-		"Line Out Jack", "AOUT1L",
-		"Line Out Jack", "AOUT1R",
-		"Line Out Jack", "AOUT2L",
-		"Line Out Jack", "AOUT2R",
-		"Line Out Jack", "AOUT3L",
-		"Line Out Jack", "AOUT3R",
-		"Line Out Jack", "AOUT4L",
-		"Line Out Jack", "AOUT4R",
-		"AIN1L", "Line In Jack",
-		"AIN1R", "Line In Jack",
-		"AIN2L", "Line In Jack",
-		"AIN2R", "Line In Jack";
-};

diff --git a/Bindings/sound/fsl-asoc-card.yaml b/Bindings/sound/fsl-asoc-card.yaml
new file mode 100644
index 0000000..9922664
--- /dev/null
+++ b/Bindings/sound/fsl-asoc-card.yaml

@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl-asoc-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Generic ASoC Sound Card with ASRC support
+
+description:
+  The Freescale Generic ASoC Sound Card can be used, ideally,
+  for all Freescale SoCs connecting with external CODECs.
+
+  The idea of this generic sound card is a bit like ASoC Simple Card.
+  However, for Freescale SoCs (especially those released in recent years),
+  most of them have ASRC inside. And this is a specific feature that might
+  be painstakingly controlled and merged into the Simple Card.
+
+  So having this generic sound card allows all Freescale SoC users to
+  benefit from the simplification of a new card support and the capability
+  of the wide sample rates support through ASRC.
+
+  Note, The card is initially designed for those sound cards who use AC'97, I2S
+  and PCM DAI formats. However, it'll be also possible to support those non
+  AC'97/I2S/PCM type sound cards, such as S/PDIF audio and HDMI audio, as
+  long as the driver has been properly upgraded.
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx-sgtl5000
+              - fsl,imx25-pdk-sgtl5000
+              - fsl,imx53-cpuvo-sgtl5000
+              - fsl,imx51-babbage-sgtl5000
+              - fsl,imx53-m53evk-sgtl5000
+              - fsl,imx53-qsb-sgtl5000
+              - fsl,imx53-voipac-sgtl5000
+              - fsl,imx6-armadeus-sgtl5000
+              - fsl,imx6-rex-sgtl5000
+              - fsl,imx6-sabreauto-cs42888
+              - fsl,imx6-wandboard-sgtl5000
+              - fsl,imx6dl-nit6xlite-sgtl5000
+              - fsl,imx6q-ba16-sgtl5000
+              - fsl,imx6q-nitrogen6_max-sgtl5000
+              - fsl,imx6q-nitrogen6_som2-sgtl5000
+              - fsl,imx6q-nitrogen6x-sgtl5000
+              - fsl,imx6q-sabrelite-sgtl5000
+              - fsl,imx6q-sabresd-wm8962
+              - fsl,imx6q-udoo-ac97
+              - fsl,imx6q-ventana-sgtl5000
+              - fsl,imx6sl-evk-wm8962
+              - fsl,imx6sx-sdb-mqs
+              - fsl,imx6sx-sdb-wm8962
+              - fsl,imx7d-evk-wm8960
+              - karo,tx53-audio-sgtl5000
+              - tq,imx53-mba53-sgtl5000
+          - enum:
+              - fsl,imx-audio-ac97
+              - fsl,imx-audio-cs42888
+              - fsl,imx-audio-mqs
+              - fsl,imx-audio-sgtl5000
+              - fsl,imx-audio-wm8960
+              - fsl,imx-audio-wm8962
+      - items:
+          - enum:
+              - fsl,imx-audio-ac97
+              - fsl,imx-audio-cs42888
+              - fsl,imx-audio-cs427x
+              - fsl,imx-audio-mqs
+              - fsl,imx-audio-nau8822
+              - fsl,imx-audio-sgtl5000
+              - fsl,imx-audio-si476x
+              - fsl,imx-audio-tlv320aic31xx
+              - fsl,imx-audio-tlv320aic32x4
+              - fsl,imx-audio-wm8524
+              - fsl,imx-audio-wm8904
+              - fsl,imx-audio-wm8960
+              - fsl,imx-audio-wm8962
+              - fsl,imx-audio-wm8958
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: The user-visible name of this sound complex
+
+  audio-asrc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of ASRC. It can be absent if there's no
+      need to add ASRC support via DPCM.
+
+  audio-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of an audio codec
+
+  audio-cpu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of an CPU DAI controller
+
+  audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description:
+      A list of the connections between audio components. Each entry is a
+      pair of strings, the first being the connection's sink, the second
+      being the connection's source. There're a few pre-designed board
+      connectors. "AMIC" stands for Analog Microphone Jack.
+      "DMIC" stands for Digital Microphone Jack. The "Mic Jack" and "AMIC"
+      are redundant while coexisting in order to support the old bindings
+      of wm8962 and sgtl5000.
+
+  hp-det-gpio:
+    deprecated: true
+    maxItems: 1
+    description: The GPIO that detect headphones are plugged in
+
+  hp-det-gpios:
+    maxItems: 1
+    description: The GPIO that detect headphones are plugged in
+
+  mic-det-gpio:
+    deprecated: true
+    maxItems: 1
+    description: The GPIO that detect microphones are plugged in
+
+  mic-det-gpios:
+    maxItems: 1
+    description: The GPIO that detect microphones are plugged in
+
+  bitclock-master:
+    $ref: simple-card.yaml#/definitions/bitclock-master
+    description: Indicates dai-link bit clock master.
+
+  frame-master:
+    $ref: simple-card.yaml#/definitions/frame-master
+    description: Indicates dai-link frame master.
+
+  format:
+    $ref: simple-card.yaml#/definitions/format
+    description: audio format.
+
+  frame-inversion:
+    $ref: simple-card.yaml#/definitions/frame-inversion
+    description: dai-link uses frame clock inversion.
+
+  bitclock-inversion:
+    $ref: simple-card.yaml#/definitions/bitclock-inversion
+    description: dai-link uses bit clock inversion.
+
+  mclk-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: main clock id, specific for each card configuration.
+
+  mux-int-port:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 7]
+    description: The internal port of the i.MX audio muxer (AUDMUX)
+
+  mux-ext-port:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [3, 4, 5, 6]
+    description: The external port of the i.MX audio muxer
+
+  ssi-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of an CPU DAI controller
+
+required:
+  - compatible
+  - model
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound-cs42888 {
+        compatible = "fsl,imx-audio-cs42888";
+        model = "cs42888-audio";
+        audio-cpu = <&esai>;
+        audio-asrc = <&asrc>;
+        audio-codec = <&cs42888>;
+        audio-routing =
+             "Line Out Jack", "AOUT1L",
+             "Line Out Jack", "AOUT1R",
+             "Line Out Jack", "AOUT2L",
+             "Line Out Jack", "AOUT2R",
+             "Line Out Jack", "AOUT3L",
+             "Line Out Jack", "AOUT3R",
+             "Line Out Jack", "AOUT4L",
+             "Line Out Jack", "AOUT4R",
+             "AIN1L", "Line In Jack",
+             "AIN1R", "Line In Jack",
+             "AIN2L", "Line In Jack",
+             "AIN2R", "Line In Jack";
+    };

diff --git a/Bindings/sound/imx-audio-spdif.txt b/Bindings/sound/imx-audio-spdif.txt
deleted file mode 100644
index da84a44..0000000
--- a/Bindings/sound/imx-audio-spdif.txt
+++ /dev/null

@@ -1,36 +0,0 @@
-Freescale i.MX audio complex with S/PDIF transceiver
-
-Required properties:
-
-  - compatible		: "fsl,imx-audio-spdif"
-
-  - model		: The user-visible name of this sound complex
-
-  - spdif-controller	: The phandle of the i.MX S/PDIF controller
-
-
-Optional properties:
-
-  - spdif-out		: This is a boolean property. If present, the
-			  transmitting function of S/PDIF will be enabled,
-			  indicating there's a physical S/PDIF out connector
-			  or jack on the board or it's connecting to some
-			  other IP block, such as an HDMI encoder or
-			  display-controller.
-
-  - spdif-in		: This is a boolean property. If present, the receiving
-			  function of S/PDIF will be enabled, indicating there
-			  is a physical S/PDIF in connector/jack on the board.
-
-* Note: At least one of these two properties should be set in the DT binding.
-
-
-Example:
-
-sound-spdif {
-	compatible = "fsl,imx-audio-spdif";
-	model = "imx-spdif";
-	spdif-controller = <&spdif>;
-	spdif-out;
-	spdif-in;
-};

diff --git a/Bindings/sound/mediatek,mt2701-wm8960.yaml b/Bindings/sound/mediatek,mt2701-wm8960.yaml
new file mode 100644
index 0000000..cf98546
--- /dev/null
+++ b/Bindings/sound/mediatek,mt2701-wm8960.yaml

@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mediatek,mt2701-wm8960.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT2701 with WM8960 CODEC
+
+maintainers:
+  - Kartik Agarwala <agarwala.kartik@gmail.com>
+
+properties:
+  compatible:
+    const: mediatek,mt2701-wm8960-machine
+
+  mediatek,platform:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of MT2701 ASoC platform.
+
+  audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description:
+      A list of the connections between audio components. Each entry is a
+      pair of strings, the first being the connection's sink, the second
+      being the connection's source.
+
+  mediatek,audio-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the WM8960 audio codec.
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - mediatek,platform
+  - audio-routing
+  - mediatek,audio-codec
+  - pinctrl-names
+  - pinctrl-0
+
+examples:
+  - |
+    sound {
+        compatible = "mediatek,mt2701-wm8960-machine";
+        mediatek,platform = <&afe>;
+        audio-routing =
+            "Headphone", "HP_L",
+            "Headphone", "HP_R",
+            "LINPUT1", "AMIC",
+            "RINPUT1", "AMIC";
+        mediatek,audio-codec = <&wm8960>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&aud_pins_default>;
+    };

diff --git a/Bindings/sound/mt2701-wm8960.txt b/Bindings/sound/mt2701-wm8960.txt
deleted file mode 100644
index 809b609..0000000
--- a/Bindings/sound/mt2701-wm8960.txt
+++ /dev/null

@@ -1,24 +0,0 @@
-MT2701 with WM8960 CODEC
-
-Required properties:
-- compatible: "mediatek,mt2701-wm8960-machine"
-- mediatek,platform: the phandle of MT2701 ASoC platform
-- audio-routing: a list of the connections between audio
-- mediatek,audio-codec: the phandles of wm8960 codec
-- pinctrl-names: Should contain only one value - "default"
-- pinctrl-0: Should specify pin control groups used for this controller.
-
-Example:
-
-	sound:sound {
-		compatible = "mediatek,mt2701-wm8960-machine";
-		mediatek,platform = <&afe>;
-		audio-routing =
-			"Headphone", "HP_L",
-			"Headphone", "HP_R",
-			"LINPUT1", "AMIC",
-			"RINPUT1", "AMIC";
-		mediatek,audio-codec = <&wm8960>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&aud_pins_default>;
-	};

diff --git a/Bindings/sound/mt8186-mt6366-da7219-max98357.yaml b/Bindings/sound/mt8186-mt6366-da7219-max98357.yaml
index 9853c11..cbc641e 100644
--- a/Bindings/sound/mt8186-mt6366-da7219-max98357.yaml
+++ b/Bindings/sound/mt8186-mt6366-da7219-max98357.yaml

@@ -12,17 +12,46 @@
 description:
   This binding describes the MT8186 sound card.
 
+allOf:
+  - $ref: sound-card-common.yaml#
+
 properties:
   compatible:
     enum:
       - mediatek,mt8186-mt6366-da7219-max98357-sound
 
+  audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description:
+      A list of the connections between audio components. Each entry is a
+      pair of strings, the first being the connection's sink, the second
+      being the connection's source.
+      Valid names could be the input or output widgets of audio components,
+      power supplies, MicBias of codec and the software switch.
+    minItems: 2
+    items:
+      enum:
+        # Sinks
+        - HDMI1
+        - Headphones
+        - Line Out
+        - MIC
+        - Speakers
+
+        # Sources
+        - Headset Mic
+        - HPL
+        - HPR
+        - Speaker
+        - TX
+
   mediatek,platform:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: The phandle of MT8186 ASoC platform.
 
   headset-codec:
     type: object
+    deprecated: true
     additionalProperties: false
     properties:
       sound-dai:
@@ -32,6 +61,7 @@
 
   playback-codecs:
     type: object
+    deprecated: true
     additionalProperties: false
     properties:
       sound-dai:
@@ -53,32 +83,115 @@
       A list of the desired dai-links in the sound card. Each entry is a
       name defined in the machine driver.
 
+patternProperties:
+  ".*-dai-link$":
+    type: object
+    additionalProperties: false
+    description:
+      Container for dai-link level properties and CODEC sub-nodes.
+
+    properties:
+      link-name:
+        description: Indicates dai-link name and PCM stream name
+        items:
+          enum:
+            - I2S0
+            - I2S1
+            - I2S2
+            - I2S3
+
+      codec:
+        description: Holds subnode which indicates codec dai.
+        type: object
+        additionalProperties: false
+        properties:
+          sound-dai:
+            minItems: 1
+            maxItems: 2
+        required:
+          - sound-dai
+
-additionalProperties: false
+      dai-format:
+        description: audio format
+        items:
+          enum:
+            - i2s
+            - right_j
+            - left_j
+            - dsp_a
+            - dsp_b
+
+      mediatek,clk-provider:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: Indicates dai-link clock master.
+        items:
+          enum:
+            - cpu
+            - codec
+
+    required:
+      - link-name
+
+unevaluatedProperties: false
 
 required:
   - compatible
   - mediatek,platform
-  - headset-codec
-  - playback-codecs
+
+# Disallow legacy properties if xxx-dai-link nodes are specified
+if:
+  not:
+    patternProperties:
+      ".*-dai-link$": false
+then:
+  properties:
+    headset-codec: false
+    speaker-codecs: false
 
 examples:
   - |
 
     sound: mt8186-sound {
         compatible = "mediatek,mt8186-mt6366-da7219-max98357-sound";
-        mediatek,platform = <&afe>;
+        model = "mt8186_da7219_m98357";
         pinctrl-names = "aud_clk_mosi_off",
                         "aud_clk_mosi_on";
         pinctrl-0 = <&aud_clk_mosi_off>;
         pinctrl-1 = <&aud_clk_mosi_on>;
+        mediatek,platform = <&afe>;
 
-        headset-codec {
-            sound-dai = <&da7219>;
+        audio-routing =
+                "Headphones", "HPL",
+                "Headphones", "HPR",
+                "MIC", "Headset Mic",
+                "Speakers", "Speaker",
+                "HDMI1", "TX";
+
+        hs-playback-dai-link {
+                link-name = "I2S0";
+                dai-format = "i2s";
+                mediatek,clk-provider = "cpu";
+                codec {
+                        sound-dai = <&da7219>;
+                };
+        };
+
+        hs-capture-dai-link {
+                link-name = "I2S1";
+                dai-format = "i2s";
+                mediatek,clk-provider = "cpu";
+                codec {
+                        sound-dai = <&da7219>;
+                };
         };
 
-        playback-codecs {
-            sound-dai = <&anx_bridge_dp>,
-                        <&max98357a>;
+        spk-dp-playback-dai-link {
+                link-name = "I2S3";
+                dai-format = "i2s";
+                mediatek,clk-provider = "cpu";
+                codec {
+                        sound-dai = <&anx_bridge_dp>, <&max98357a>;
+                };
         };
     };
 

diff --git a/Bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml b/Bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml
index bdf7b09..ed93f18 100644
--- a/Bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml
+++ b/Bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml

@@ -12,6 +12,9 @@
 description:
   This binding describes the MT8186 sound card.
 
+allOf:
+  - $ref: sound-card-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -19,6 +22,34 @@
       - mediatek,mt8186-mt6366-rt5682s-max98360-sound
       - mediatek,mt8186-mt6366-rt5650-sound
 
+  audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description:
+      A list of the connections between audio components. Each entry is a
+      pair of strings, the first being the connection's sink, the second
+      being the connection's source.
+      Valid names could be the input or output widgets of audio components,
+      power supplies, MicBias of codec and the software switch.
+    minItems: 2
+    items:
+      enum:
+        # Sinks
+        - HDMI1
+        - Headphone
+        - IN1P
+        - IN1N
+        - Line Out
+        - Speakers
+
+        # Sources
+        - Headset Mic
+        - HPOL
+        - HPOR
+        - Speaker
+        - SPOL
+        - SPOR
+        - TX
+
   mediatek,platform:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: The phandle of MT8186 ASoC platform.
@@ -32,6 +63,7 @@
 
   headset-codec:
     type: object
+    deprecated: true
     additionalProperties: false
     properties:
       sound-dai:
@@ -41,6 +73,7 @@
 
   playback-codecs:
     type: object
+    deprecated: true
     additionalProperties: false
     properties:
       sound-dai:
@@ -62,13 +95,56 @@
       A list of the desired dai-links in the sound card. Each entry is a
       name defined in the machine driver.
 
+patternProperties:
+  ".*-dai-link$":
+    type: object
+    additionalProperties: false
+    description:
+      Container for dai-link level properties and CODEC sub-nodes.
+
+    properties:
+      link-name:
+        description: Indicates dai-link name and PCM stream name
+        enum: [ I2S0, I2S1, I2S2, I2S3 ]
+
+      codec:
+        description: Holds subnode which indicates codec dai.
+        type: object
+        additionalProperties: false
+        properties:
+          sound-dai:
+            minItems: 1
+            maxItems: 2
+        required:
+          - sound-dai
+
-additionalProperties: false
+      dai-format:
+        description: audio format
+        enum: [ i2s, right_j, left_j, dsp_a, dsp_b ]
+
+      mediatek,clk-provider:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: Indicates dai-link clock master.
+        enum: [ cpu, codec ]
+
+    required:
+      - link-name
+
+unevaluatedProperties: false
 
 required:
   - compatible
   - mediatek,platform
-  - headset-codec
-  - playback-codecs
+
+# Disallow legacy properties if xxx-dai-link nodes are specified
+if:
+  not:
+    patternProperties:
+      ".*-dai-link$": false
+then:
+  properties:
+    headset-codec: false
+    speaker-codecs: false
 
 examples:
   - |
@@ -76,23 +152,49 @@
 
     sound: mt8186-sound {
         compatible = "mediatek,mt8186-mt6366-rt1019-rt5682s-sound";
-        mediatek,platform = <&afe>;
+        model = "mt8186_rt1019_rt5682s";
         pinctrl-names = "aud_clk_mosi_off",
                         "aud_clk_mosi_on",
                         "aud_gpio_dmic_sec";
         pinctrl-0 = <&aud_clk_mosi_off>;
         pinctrl-1 = <&aud_clk_mosi_on>;
         pinctrl-2 = <&aud_gpio_dmic_sec>;
+        mediatek,platform = <&afe>;
 
         dmic-gpios = <&pio 23 GPIO_ACTIVE_HIGH>;
 
+        audio-routing =
+                "Headphone", "HPOL",
+                "Headphone", "HPOR",
+                "IN1P", "Headset Mic",
+                "Speakers", "Speaker",
+                "HDMI1", "TX";
+
-        headset-codec {
-            sound-dai = <&rt5682s>;
+        hs-playback-dai-link {
+                link-name = "I2S0";
+                dai-format = "i2s";
+                mediatek,clk-provider = "cpu";
+                codec {
+                        sound-dai = <&rt5682s 0>;
+                };
         };
 
-        playback-codecs {
-             sound-dai = <&it6505dptx>,
-                         <&rt1019p>;
+        hs-capture-dai-link {
+                link-name = "I2S1";
+                dai-format = "i2s";
+                mediatek,clk-provider = "cpu";
+                codec {
+                        sound-dai = <&rt5682s 0>;
+                };
+        };
+
+        spk-hdmi-playback-dai-link {
+                link-name = "I2S3";
+                dai-format = "i2s";
+                mediatek,clk-provider = "cpu";
+                codec {
+                        sound-dai = <&it6505dptx>, <&rt1019p>;
+                };
         };
     };
 

diff --git a/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml b/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml
index 7e50f5d..c4e68f3 100644
--- a/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml
+++ b/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml

@@ -13,6 +13,9 @@
 description:
   This binding describes the MT8192 sound card.
 
+allOf:
+  - $ref: sound-card-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -20,6 +23,31 @@
       - mediatek,mt8192_mt6359_rt1015p_rt5682
       - mediatek,mt8192_mt6359_rt1015p_rt5682s
 
+  audio-routing:
+    description:
+      A list of the connections between audio components. Each entry is a
+      pair of strings, the first being the connection's sink, the second
+      being the connection's source.
+      Valid names could be the input or output widgets of audio components,
+      power supplies, MicBias of codec and the software switch.
+    minItems: 2
+    items:
+      enum:
+        # Sinks
+        - Speakers
+        - Headphone Jack
+        - IN1P
+        - Left Spk
+        - Right Spk
+
+        # Sources
+        - Headset Mic
+        - HPOL
+        - HPOR
+        - Left SPO
+        - Right SPO
+        - Speaker
+
   mediatek,platform:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: The phandle of MT8192 ASoC platform.
@@ -27,10 +55,12 @@
   mediatek,hdmi-codec:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: The phandle of HDMI codec.
+    deprecated: true
 
   headset-codec:
     type: object
     additionalProperties: false
+    deprecated: true
 
     properties:
       sound-dai:
@@ -41,6 +71,7 @@
   speaker-codecs:
     type: object
     additionalProperties: false
+    deprecated: true
 
     properties:
       sound-dai:
@@ -51,33 +82,121 @@
     required:
       - sound-dai
 
+patternProperties:
+  ".*-dai-link$":
+    type: object
+    additionalProperties: false
+
+    description:
+      Container for dai-link level properties and CODEC sub-nodes.
+
+    properties:
+      link-name:
+        description: Indicates dai-link name and PCM stream name
+        enum:
+          - I2S0
+          - I2S1
+          - I2S2
+          - I2S3
+          - I2S4
+          - I2S5
+          - I2S6
+          - I2S7
+          - I2S8
+          - I2S9
+          - TDM
+
+      codec:
+        description: Holds subnode which indicates codec dai.
+        type: object
+        additionalProperties: false
+        properties:
+          sound-dai:
+            minItems: 1
+            maxItems: 2
+        required:
+          - sound-dai
+
+      dai-format:
+        description: audio format
+        enum: [ i2s, right_j, left_j, dsp_a, dsp_b ]
+
-additionalProperties: false
+      mediatek,clk-provider:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: Indicates dai-link clock master.
+        enum: [ cpu, codec ]
+
+    required:
+      - link-name
+
+unevaluatedProperties: false
 
 required:
   - compatible
   - mediatek,platform
-  - headset-codec
-  - speaker-codecs
+
+# Disallow legacy properties if xxx-dai-link nodes are specified
+if:
+  not:
+    patternProperties:
+      ".*-dai-link$": false
+then:
+  properties:
+    headset-codec: false
+    speaker-codecs: false
+    mediatek,hdmi-codec: false
 
 examples:
   - |
 
     sound: mt8192-sound {
         compatible = "mediatek,mt8192_mt6359_rt1015_rt5682";
-        mediatek,platform = <&afe>;
-        mediatek,hdmi-codec = <&anx_bridge_dp>;
+        model = "mt8192_mt6359_rt1015_rt5682";
         pinctrl-names = "aud_clk_mosi_off",
                         "aud_clk_mosi_on";
         pinctrl-0 = <&aud_clk_mosi_off>;
         pinctrl-1 = <&aud_clk_mosi_on>;
+        mediatek,platform = <&afe>;
 
-        headset-codec {
-            sound-dai = <&rt5682>;
+        audio-routing =
+                "Headphone Jack", "HPOL",
+                "Headphone Jack", "HPOR",
+                "IN1P", "Headset Mic",
+                "Speakers", "Speaker";
+
+        spk-playback-dai-link {
+                link-name = "I2S3";
+                dai-format = "i2s";
+                mediatek,clk-provider = "cpu";
+                codec {
+                        sound-dai = <&rt1015p>;
+                };
+        };
+
+        hs-playback-dai-link {
+                link-name = "I2S8";
+                dai-format = "i2s";
+                mediatek,clk-provider = "cpu";
+                codec {
+                        sound-dai = <&rt5682 0>;
+                };
+        };
+
+        hs-capture-dai-link {
+                link-name = "I2S9";
+                dai-format = "i2s";
+                mediatek,clk-provider = "cpu";
+                codec {
+                        sound-dai = <&rt5682 0>;
+                };
         };
 
-        speaker-codecs {
-            sound-dai = <&rt1015_l>,
-                        <&rt1015_r>;
+        displayport-dai-link {
+                link-name = "TDM";
+                dai-format = "dsp_a";
+                codec {
+                        sound-dai = <&anx_bridge_dp>;
+                };
         };
     };
 

diff --git a/Bindings/sound/mt8195-mt6359.yaml b/Bindings/sound/mt8195-mt6359.yaml
index c1ddbf6..2af1d8f 100644
--- a/Bindings/sound/mt8195-mt6359.yaml
+++ b/Bindings/sound/mt8195-mt6359.yaml

@@ -12,6 +12,9 @@
 description:
   This binding describes the MT8195 sound card.
 
+allOf:
+  - $ref: sound-card-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -23,6 +26,33 @@
     $ref: /schemas/types.yaml#/definitions/string
     description: User specified audio sound card name
 
+  audio-routing:
+    description:
+      A list of the connections between audio components. Each entry is a
+      pair of strings, the first being the connection's sink, the second
+      being the connection's source.
+      Valid names could be the input or output widgets of audio components,
+      power supplies, MicBias of codec and the software switch.
+    minItems: 2
+    items:
+      enum:
+        # Sinks
+        - Ext Spk
+        - Headphone
+        - IN1P
+        - Left Spk
+        - Right Spk
+
+        # Sources
+        - Headset Mic
+        - HPOL
+        - HPOR
+        - Left BE_OUT
+        - Left SPO
+        - Right BE_OUT
+        - Right SPO
+        - Speaker
+
   mediatek,platform:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: The phandle of MT8195 ASoC platform.
@@ -30,10 +60,12 @@
   mediatek,dptx-codec:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: The phandle of MT8195 Display Port Tx codec node.
+    deprecated: true
 
   mediatek,hdmi-codec:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: The phandle of MT8195 HDMI codec node.
+    deprecated: true
 
   mediatek,adsp:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -45,20 +77,122 @@
       A list of the desired dai-links in the sound card. Each entry is a
       name defined in the machine driver.
 
+patternProperties:
+  ".*-dai-link$":
+    type: object
+    additionalProperties: false
+    description:
+      Container for dai-link level properties and CODEC sub-nodes.
+
+    properties:
+      link-name:
+        description: Indicates dai-link name and PCM stream name
+        enum:
+          - DPTX_BE
+          - ETDM1_IN_BE
+          - ETDM2_IN_BE
+          - ETDM1_OUT_BE
+          - ETDM2_OUT_BE
+          - ETDM3_OUT_BE
+          - PCM1_BE
+
+      codec:
+        description: Holds subnode which indicates codec dai.
+        type: object
+        additionalProperties: false
+        properties:
+          sound-dai:
+            minItems: 1
+            maxItems: 2
+        required:
+          - sound-dai
+
+      dai-format:
+        description: audio format
+        enum: [ i2s, right_j, left_j, dsp_a, dsp_b ]
+
+      mediatek,clk-provider:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: Indicates dai-link clock master.
+        enum: [ cpu, codec ]
+
+    required:
+      - link-name
+
 additionalProperties: false
 
 required:
   - compatible
   - mediatek,platform
 
+# Disallow legacy properties if xxx-dai-link nodes are specified
+if:
+  not:
+    patternProperties:
+      ".*-dai-link$": false
+then:
+  properties:
+    mediatek,dptx-codec: false
+    mediatek,hdmi-codec: false
+
 examples:
   - |
 
     sound: mt8195-sound {
         compatible = "mediatek,mt8195_mt6359_rt1019_rt5682";
+        model = "mt8195_r1019_5682";
         mediatek,platform = <&afe>;
         pinctrl-names = "default";
         pinctrl-0 = <&aud_pins_default>;
+
+        audio-routing =
+                "Headphone", "HPOL",
+                "Headphone", "HPOR",
+                "IN1P", "Headset Mic",
+                "Ext Spk", "Speaker";
+
+        mm-dai-link {
+                link-name = "ETDM1_IN_BE";
+                mediatek,clk-provider = "cpu";
+        };
+
+        hs-playback-dai-link {
+                link-name = "ETDM1_OUT_BE";
+                mediatek,clk-provider = "cpu";
+                codec {
+                        sound-dai = <&headset_codec>;
+                };
+        };
+
+        hs-capture-dai-link {
+                link-name = "ETDM2_IN_BE";
+                mediatek,clk-provider = "cpu";
+                codec {
+                        sound-dai = <&headset_codec>;
+                };
+        };
+
+        spk-playback-dai-link {
+                link-name = "ETDM2_OUT_BE";
+                mediatek,clk-provider = "cpu";
+                codec {
+                        sound-dai = <&spk_amplifier>;
+                };
+        };
+
+        hdmi-dai-link {
+                link-name = "ETDM3_OUT_BE";
+                codec {
+                        sound-dai = <&hdmi_tx>;
+                };
+        };
+
+        displayport-dai-link {
+                link-name = "DPTX_BE";
+                codec {
+                        sound-dai = <&dp_tx>;
+                };
+        };
     };
 
 ...

diff --git a/Bindings/sound/nuvoton,nau8325.yaml b/Bindings/sound/nuvoton,nau8325.yaml
new file mode 100644
index 0000000..979be0d
--- /dev/null
+++ b/Bindings/sound/nuvoton,nau8325.yaml

@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8325.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU8325 audio Amplifier
+
+maintainers:
+  - Seven Lee <WTLI@nuvoton.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: nuvoton,nau8325
+
+  reg:
+    maxItems: 1
+
+  nuvoton,vref-impedance-ohms:
+    description:
+      The vref impedance to be used in ohms. Middle of voltage enables
+      Tie-Off selection options. Due to the high impedance of the VREF
+      pin, it is important to use a low-leakage capacitor.
+
+    enum: [0, 25000, 125000, 2500]
+
+  nuvoton,dac-vref-microvolt:
+    description:
+      The DAC vref to be used in voltage. DAC reference voltage setting. Can
+      be used for minor tuning of the output level. Since the VDDA is range
+      between 1.62 to 1.98 voltage, the typical value for design is 1.8V. After
+      the minor tuning, the final microvolt are as the below.
+
+    enum: [1800000, 2700000, 2880000, 3060000]
+
+  nuvoton,alc-enable:
+    description:
+      Enable digital automatic level control (ALC) function.
+    type: boolean
+
+  nuvoton,clock-detection-disable:
+    description:
+      When clock detection is enabled, it will detect whether MCLK
+      and FS are within the range. MCLK range is from 2.048MHz to 24.576MHz.
+      FS range is from 8kHz to 96kHz. And also needs to detect the ratio
+      MCLK_SRC/LRCK of 256, 400 or 500, and needs to detect the BCLK
+      to make sure data is present. There needs to be at least 8 BCLK
+      cycles per Frame Sync.
+    type: boolean
+
+  nuvoton,clock-det-data:
+    description:
+      Request clock detection to require 2048 non-zero samples before enabling
+      the audio paths. If set then non-zero samples is required, otherwise it
+      doesn't matter.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@21 {
+            compatible = "nuvoton,nau8325";
+            reg = <0x21>;
+            nuvoton,vref-impedance-ohms = <125000>;
+            nuvoton,dac-vref-microvolt = <2880000>;
+            nuvoton,alc-enable;
+            nuvoton,clock-det-data;
+        };
+    };

diff --git a/Bindings/sound/nuvoton,nau8821.yaml b/Bindings/sound/nuvoton,nau8821.yaml
index 054b539..9f44168 100644
--- a/Bindings/sound/nuvoton,nau8821.yaml
+++ b/Bindings/sound/nuvoton,nau8821.yaml

@@ -103,6 +103,12 @@
         just limited to the left adc for design demand.
     type: boolean
 
+  nuvoton,adc-delay-ms:
+    description: Delay (in ms) to make input path stable and avoid pop noise.
+    minimum: 125
+    maximum: 500
+    default: 125
+
   '#sound-dai-cells':
     const: 0
 
@@ -136,6 +142,7 @@
             nuvoton,jack-eject-debounce = <0>;
             nuvoton,dmic-clk-threshold = <3072000>;
             nuvoton,dmic-slew-rate = <0>;
+            nuvoton,adc-delay-ms = <125>;
             #sound-dai-cells = <0>;
         };
     };

diff --git a/Bindings/sound/nvidia,tegra20-ac97.txt b/Bindings/sound/nvidia,tegra20-ac97.txt
deleted file mode 100644
index eaf0010..0000000
--- a/Bindings/sound/nvidia,tegra20-ac97.txt
+++ /dev/null

@@ -1,36 +0,0 @@
-NVIDIA Tegra 20 AC97 controller
-
-Required properties:
-- compatible : "nvidia,tegra20-ac97"
-- reg : Should contain AC97 controller registers location and length
-- interrupts : Should contain AC97 interrupt
-- resets : Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
-  - ac97
-- dmas : Must contain an entry for each entry in clock-names.
-  See ../dma/dma.txt for details.
-- dma-names : Must include the following entries:
-  - rx
-  - tx
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-- nvidia,codec-reset-gpio : The Tegra GPIO controller's phandle and the number
-  of the GPIO used to reset the external AC97 codec
-- nvidia,codec-sync-gpio : The Tegra GPIO controller's phandle and the number
-  of the GPIO corresponding with the AC97 DAP _FS line
-
-Example:
-
-ac97@70002000 {
-	compatible = "nvidia,tegra20-ac97";
-	reg = <0x70002000 0x200>;
-	interrupts = <0 81 0x04>;
-	nvidia,codec-reset-gpio = <&gpio 170 0>;
-	nvidia,codec-sync-gpio = <&gpio 120 0>;
-	clocks = <&tegra_car 3>;
-	resets = <&tegra_car 3>;
-	reset-names = "ac97";
-	dmas = <&apbdma 12>, <&apbdma 12>;
-	dma-names = "rx", "tx";
-};

diff --git a/Bindings/sound/nvidia,tegra20-ac97.yaml b/Bindings/sound/nvidia,tegra20-ac97.yaml
new file mode 100644
index 0000000..4ea0a30
--- /dev/null
+++ b/Bindings/sound/nvidia,tegra20-ac97.yaml

@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra20-ac97.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 AC97 controller
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra20-ac97
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: ac97
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  nvidia,codec-reset-gpios:
+    description: Reset pin of external AC97 codec
+    maxItems: 1
+
+  nvidia,codec-sync-gpios:
+    description: AC97 DAP _FS line
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - resets
+  - reset-names
+  - interrupts
+  - clocks
+  - dmas
+  - dma-names
+  - nvidia,codec-reset-gpios
+  - nvidia,codec-sync-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    ac97@70002000 {
+        compatible = "nvidia,tegra20-ac97";
+        reg = <0x70002000 0x200>;
+        resets = <&tegra_car 3>;
+        reset-names = "ac97";
+        interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car 3>;
+        dmas = <&apbdma 12>, <&apbdma 12>;
+        dma-names = "rx", "tx";
+        nvidia,codec-reset-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+        nvidia,codec-sync-gpios = <&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+    };
+...

diff --git a/Bindings/sound/nvidia,tegra20-das.txt b/Bindings/sound/nvidia,tegra20-das.txt
deleted file mode 100644
index 6de3a7e..0000000
--- a/Bindings/sound/nvidia,tegra20-das.txt
+++ /dev/null

@@ -1,12 +0,0 @@
-NVIDIA Tegra 20 DAS (Digital Audio Switch) controller
-
-Required properties:
-- compatible : "nvidia,tegra20-das"
-- reg : Should contain DAS registers location and length
-
-Example:
-
-das@70000c00 {
-	compatible = "nvidia,tegra20-das";
-	reg = <0x70000c00 0x80>;
-};

diff --git a/Bindings/sound/nvidia,tegra20-das.yaml b/Bindings/sound/nvidia,tegra20-das.yaml
new file mode 100644
index 0000000..44c5ce8
--- /dev/null
+++ b/Bindings/sound/nvidia,tegra20-das.yaml

@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra20-das.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra 20 DAS (Digital Audio Switch) controller
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra20-das
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        das@70000c00 {
+            compatible = "nvidia,tegra20-das";
+            reg = <0x70000c00 0x80>;
+        };
+    };
+...

diff --git a/Bindings/sound/nvidia,tegra30-i2s.txt b/Bindings/sound/nvidia,tegra30-i2s.txt
deleted file mode 100644
index 38caa93..0000000
--- a/Bindings/sound/nvidia,tegra30-i2s.txt
+++ /dev/null

@@ -1,27 +0,0 @@
-NVIDIA Tegra30 I2S controller
-
-Required properties:
-- compatible : For Tegra30, must contain "nvidia,tegra30-i2s".  For Tegra124,
-  must contain "nvidia,tegra124-i2s".  Otherwise, must contain
-  "nvidia,<chip>-i2s" plus at least one of the above, where <chip> is
-  tegra114 or tegra132.
-- reg : Should contain I2S registers location and length
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-- resets : Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
-  - i2s
-- nvidia,ahub-cif-ids : The list of AHUB CIF IDs for this port, rx (playback)
-  first, tx (capture) second. See nvidia,tegra30-ahub.txt for values.
-
-Example:
-
-i2s@70080300 {
-	compatible = "nvidia,tegra30-i2s";
-	reg = <0x70080300 0x100>;
-	nvidia,ahub-cif-ids = <4 4>;
-	clocks = <&tegra_car 11>;
-	resets = <&tegra_car 11>;
-	reset-names = "i2s";
-};

diff --git a/Bindings/sound/nvidia,tegra30-i2s.yaml b/Bindings/sound/nvidia,tegra30-i2s.yaml
new file mode 100644
index 0000000..89c3c64
--- /dev/null
+++ b/Bindings/sound/nvidia,tegra30-i2s.yaml

@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra30-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra30 I2S controller
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra124-i2s
+          - nvidia,tegra30-i2s
+      - items:
+          - const: nvidia,tegra114-i2s
+          - const: nvidia,tegra30-i2s
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: i2s
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: i2s
+
+  nvidia,ahub-cif-ids:
+    description: list of AHUB CIF IDs
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: rx (playback)
+      - description: tx (capture)
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - reset-names
+  - nvidia,ahub-cif-ids
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra30-car.h>
+
+    i2s@70080300 {
+        compatible = "nvidia,tegra30-i2s";
+        reg = <0x70080300 0x100>;
+        nvidia,ahub-cif-ids = <4 4>;
+        clocks = <&tegra_car TEGRA30_CLK_I2S0>;
+        resets = <&tegra_car 30>;
+        reset-names = "i2s";
+    };
+...

diff --git a/Bindings/sound/qcom,sm8250.yaml b/Bindings/sound/qcom,sm8250.yaml
index 2ab6871..b2e15eb 100644
--- a/Bindings/sound/qcom,sm8250.yaml
+++ b/Bindings/sound/qcom,sm8250.yaml

@@ -29,6 +29,8 @@
       - enum:
           - qcom,apq8016-sbc-sndcard
           - qcom,msm8916-qdsp6-sndcard
+          - qcom,qcm6490-idp-sndcard
+          - qcom,qcs6490-rb3gen2-sndcard
           - qcom,qrb5165-rb5-sndcard
           - qcom,sc7180-qdsp6-sndcard
           - qcom,sc8280xp-sndcard

diff --git a/Bindings/sound/renesas,rsnd.yaml b/Bindings/sound/renesas,rsnd.yaml
index 0d7a6b5..07ec624 100644
--- a/Bindings/sound/renesas,rsnd.yaml
+++ b/Bindings/sound/renesas,rsnd.yaml

@@ -48,13 +48,16 @@
           - const: renesas,rcar_sound-gen3
       # for Gen4 SoC
       - items:
-          - const: renesas,rcar_sound-r8a779g0  # R-Car V4H
+          - enum:
+              - renesas,rcar_sound-r8a779g0  # R-Car V4H
+              - renesas,rcar_sound-r8a779h0  # R-Car V4M
           - const: renesas,rcar_sound-gen4
       # for Generic
       - enum:
           - renesas,rcar_sound-gen1
           - renesas,rcar_sound-gen2
           - renesas,rcar_sound-gen3
+          - renesas,rcar_sound-gen4
 
   reg:
     minItems: 1

diff --git a/Bindings/sound/rockchip,rk3308-codec.yaml b/Bindings/sound/rockchip,rk3308-codec.yaml
new file mode 100644
index 0000000..ecf3d7d
--- /dev/null
+++ b/Bindings/sound/rockchip,rk3308-codec.yaml

@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip,rk3308-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3308 Internal Codec
+
+description: |
+  This is the audio codec embedded in the Rockchip RK3308
+  SoC. It has 8 24-bit ADCs and 2 24-bit DACs. The maximum supported
+  sampling rate is 192 kHz.
+
+  It is connected internally to one out of a selection of the internal I2S
+  controllers.
+
+  The RK3308 audio codec has 8 independent capture channels, but some
+  features work on stereo pairs called groups:
+    * grp 0 -- MIC1 / MIC2
+    * grp 1 -- MIC3 / MIC4
+    * grp 2 -- MIC5 / MIC6
+    * grp 3 -- MIC7 / MIC8
+
+maintainers:
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+properties:
+  compatible:
+    const: rockchip,rk3308-codec
+
+  reg:
+    maxItems: 1
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the General Register Files (GRF)
+
+  clocks:
+    items:
+      - description: clock for TX
+      - description: clock for RX
+      - description: AHB clock driving the interface
+
+  clock-names:
+    items:
+      - const: mclk_tx
+      - const: mclk_rx
+      - const: hclk
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: codec
+
+  "#sound-dai-cells":
+    const: 0
+
+  rockchip,micbias-avdd-percent:
+    description: |
+      Voltage setting for the MICBIAS pins expressed as a percentage of
+      AVDD.
+
+      E.g. if rockchip,micbias-avdd-percent = 85 and AVDD = 3v3, then the
+      MIC BIAS voltage will be 3.3 V * 85% = 2.805 V.
+
+    enum: [ 50, 55, 60, 65, 70, 75, 80, 85 ]
+
+required:
+  - compatible
+  - reg
+  - rockchip,grf
+  - clocks
+  - resets
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3308-cru.h>
+
+    audio_codec: audio-codec@ff560000 {
+        compatible = "rockchip,rk3308-codec";
+        reg = <0xff560000 0x10000>;
+        rockchip,grf = <&grf>;
+        clock-names = "mclk_tx", "mclk_rx", "hclk";
+        clocks = <&cru SCLK_I2S2_8CH_TX_OUT>,
+                 <&cru SCLK_I2S2_8CH_RX_OUT>,
+                 <&cru PCLK_ACODEC>;
+        reset-names = "codec";
+        resets = <&cru SRST_ACODEC_P>;
+        #sound-dai-cells = <0>;
+    };
+
+...

diff --git a/Bindings/sound/st,stm32-i2s.yaml b/Bindings/sound/st,stm32-i2s.yaml
index b9111d3..8978f6b 100644
--- a/Bindings/sound/st,stm32-i2s.yaml
+++ b/Bindings/sound/st,stm32-i2s.yaml

@@ -65,6 +65,10 @@
     $ref: audio-graph-port.yaml#
     unevaluatedProperties: false
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - "#sound-dai-cells"

diff --git a/Bindings/sound/st,stm32-sai.yaml b/Bindings/sound/st,stm32-sai.yaml
index 59df8a8..68f97b4 100644
--- a/Bindings/sound/st,stm32-sai.yaml
+++ b/Bindings/sound/st,stm32-sai.yaml

@@ -48,6 +48,10 @@
   clock-names:
     maxItems: 3
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg
@@ -68,7 +72,7 @@
     properties:
       compatible:
         description: Compatible for SAI sub-block A or B.
-        pattern: "st,stm32-sai-sub-[ab]"
+        pattern: "^st,stm32-sai-sub-[ab]$"
 
       "#sound-dai-cells":
         const: 0

diff --git a/Bindings/sound/st,stm32-spdifrx.yaml b/Bindings/sound/st,stm32-spdifrx.yaml
index bc48151..3dedc81 100644
--- a/Bindings/sound/st,stm32-spdifrx.yaml
+++ b/Bindings/sound/st,stm32-spdifrx.yaml

@@ -50,6 +50,10 @@
   resets:
     maxItems: 1
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - "#sound-dai-cells"

diff --git a/Bindings/sound/ti,pcm1681.txt b/Bindings/sound/ti,pcm1681.txt
deleted file mode 100644
index 4df1718..0000000
--- a/Bindings/sound/ti,pcm1681.txt
+++ /dev/null

@@ -1,15 +0,0 @@
-Texas Instruments PCM1681 8-channel PWM Processor
-
-Required properties:
-
- - compatible:		Should contain "ti,pcm1681".
- - reg:			The i2c address. Should contain <0x4c>.
-
-Examples:
-
-	i2c_bus {
-		pcm1681@4c {
-			compatible = "ti,pcm1681";
-			reg = <0x4c>;
-		};
-	};

diff --git a/Bindings/sound/ti,pcm1681.yaml b/Bindings/sound/ti,pcm1681.yaml
new file mode 100644
index 0000000..5aa0061
--- /dev/null
+++ b/Bindings/sound/ti,pcm1681.yaml

@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,pcm1681.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments PCM1681 8-channel PWM Processor
+
+maintainers:
+  - Shenghao Ding <shenghao-ding@ti.com>
+  - Kevin Lu <kevin-lu@ti.com>
+  - Baojun Xu <baojun.xu@ti.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: ti,pcm1681
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pcm1681: audio-codec@4c {
+            compatible = "ti,pcm1681";
+            reg = <0x4c>;
+        };
+    };

diff --git a/Bindings/sound/ti,pcm6240.yaml b/Bindings/sound/ti,pcm6240.yaml
new file mode 100644
index 0000000..dd5b08e
--- /dev/null
+++ b/Bindings/sound/ti,pcm6240.yaml

@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 - 2024 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,pcm6240.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments PCM6240 Family Audio ADC/DAC
+
+maintainers:
+  - Shenghao Ding <shenghao-ding@ti.com>
+
+description: |
+  The PCM6240 Family is a big family of Audio ADC/DAC for
+  different Specifications, range from Personal Electric
+  to Automotive Electric, even some professional fields.
+
+  Specifications about the audio chip can be found at:
+    https://www.ti.com/lit/gpn/tlv320adc3120
+    https://www.ti.com/lit/gpn/tlv320adc5120
+    https://www.ti.com/lit/gpn/tlv320adc6120
+    https://www.ti.com/lit/gpn/dix4192
+    https://www.ti.com/lit/gpn/pcm1690
+    https://www.ti.com/lit/gpn/pcm3120-q1
+    https://www.ti.com/lit/gpn/pcm3140-q1
+    https://www.ti.com/lit/gpn/pcm5120-q1
+    https://www.ti.com/lit/gpn/pcm6120-q1
+    https://www.ti.com/lit/gpn/pcm6260-q1
+    https://www.ti.com/lit/gpn/pcm9211
+    https://www.ti.com/lit/gpn/pcmd3140
+    https://www.ti.com/lit/gpn/pcmd3180
+    https://www.ti.com/lit/gpn/taa5212
+    https://www.ti.com/lit/gpn/tad5212
+
+properties:
+  compatible:
+    description: |
+      ti,adc3120: Stereo-channel, 768-kHz, Burr-Brown™ audio analog-to-
+      digital converter (ADC) with 106-dB SNR.
+
+      ti,adc5120: 2-Channel, 768-kHz, Burr-Brown™ Audio ADC with 120-dB SNR.
+
+      ti,adc6120: Stereo-channel, 768-kHz, Burr-Brown™ audio analog-to-
+      digital converter (ADC) with 123-dB SNR.
+
+      ti,dix4192: 216-kHz digital audio converter with Quad-Channel In
+      and One-Channel Out.
+
+      ti,pcm1690: Automotive Catalog 113dB SNR 8-Channel Audio DAC with
+      Differential Outputs.
+
+      ti,pcm3120: Automotive, stereo, 106-dB SNR, 768-kHz, low-power
+      software-controlled audio ADC.
+
+      ti,pcm3140: Automotive, Quad-Channel, 768-kHz, Burr-Brown™ Audio ADC
+      with 106-dB SNR.
+
+      ti,pcm5120: Automotive, stereo, 120-dB SNR, 768-kHz, low-power
+      software-controlled audio ADC.
+
+      ti,pcm5140: Automotive, Quad-Channel, 768-kHz, Burr-Brown™ Audio ADC
+      with 120-dB SNR.
+
+      ti,pcm6120: Automotive, stereo, 123-dB SNR, 768-kHz, low-power
+      software-controlled audio ADC.
+
+      ti,pcm6140: Automotive, Quad-Channel, 768-kHz, Burr-Brown™ Audio ADC
+      with 123-dB SNR.
+
+      ti,pcm6240: Automotive 4-ch audio ADC with integrated programmable mic
+      bias, boost and input diagnostics.
+
+      ti,pcm6260: Automotive 6-ch audio ADC with integrated programmable mic
+      bias, boost and input diagnostics.
+
+      ti,pcm9211: 216-kHz digital audio converter With Stereo ADC and
+      Routing.
+
+      ti,pcmd3140: Four-channel PDM-input to TDM or I2S output converter.
+
+      ti,pcmd3180: Eight-channel pulse-density-modulation input to TDM or
+      I2S output converter.
+
+      ti,taa5212: Low-power high-performance stereo audio ADC with 118-dB
+      dynamic range.
+
+      ti,tad5212: Low-power stereo audio DAC with 120-dB dynamic range.
+    oneOf:
+      - items:
+          - enum:
+              - ti,adc3120
+              - ti,adc5120
+              - ti,pcm3120
+              - ti,pcm5120
+              - ti,pcm6120
+          - const: ti,adc6120
+      - items:
+          - enum:
+              - ti,pcmd512x
+              - ti,pcm9211
+              - ti,taa5212
+              - ti,tad5212
+          - const: ti,adc6120
+      - items:
+          - enum:
+              - ti,pcm3140
+              - ti,pcm5140
+              - ti,dix4192
+              - ti,pcm6140
+              - ti,pcm6260
+          - const: ti,pcm6240
+      - items:
+          - enum:
+              - ti,pcmd3140
+              - ti,pcmd3180
+              - ti,pcm1690
+              - ti,taa5412
+              - ti,tad5412
+          - const: ti,pcm6240
+      - enum:
+          - ti,adc6120
+          - ti,pcm6240
+
+  reg:
+    description:
+      I2C address, in multiple pcmdevices case, all the i2c address
+      aggregate as one Audio Device to support multiple audio slots.
+    minItems: 1
+    maxItems: 4
+
+  reset-gpios:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description:
+      Invalid only for ti,pcm1690 because of no INT pin.
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,pcm1690
+    then:
+      properties:
+        interrupts: false
+
+additionalProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/gpio/gpio.h>
+   i2c {
+     /* example for two devices with interrupt support */
+     #address-cells = <1>;
+     #size-cells = <0>;
+     pcm6240: audio-codec@48 {
+       compatible = "ti,pcm6240";
+       reg = <0x48>, /* primary-device */
+             <0x4b>; /* secondary-device */
+       #sound-dai-cells = <0>;
+       reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+       interrupt-parent = <&gpio1>;
+       interrupts = <15>;
+     };
+   };
+...

diff --git a/Bindings/sound/wlf,wm8776.yaml b/Bindings/sound/wlf,wm8776.yaml
new file mode 100644
index 0000000..7bbc96e
--- /dev/null
+++ b/Bindings/sound/wlf,wm8776.yaml

@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8776.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WM8776 audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: wlf,wm8776
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            compatible = "wlf,wm8776";
+            reg = <0x1a>;
+        };
+    };

diff --git a/Bindings/sound/wlf,wm8974.txt b/Bindings/sound/wlf,wm8974.txt
deleted file mode 100644
index 01d3a7c..0000000
--- a/Bindings/sound/wlf,wm8974.txt
+++ /dev/null

@@ -1,15 +0,0 @@
-WM8974 audio CODEC
-
-This device supports both I2C and SPI (configured with pin strapping
-on the board).
-
-Required properties:
-  - compatible: "wlf,wm8974"
-  - reg: the I2C address or SPI chip select number of the device
-
-Examples:
-
-codec: wm8974@1a {
-	compatible = "wlf,wm8974";
-	reg = <0x1a>;
-};

diff --git a/Bindings/sound/wlf,wm8974.yaml b/Bindings/sound/wlf,wm8974.yaml
new file mode 100644
index 0000000..d273002
--- /dev/null
+++ b/Bindings/sound/wlf,wm8974.yaml

@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8974.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WM8974 audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: wlf,wm8974
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            compatible = "wlf,wm8974";
+            reg = <0x1a>;
+        };
+    };

diff --git a/Bindings/sound/wm8776.txt b/Bindings/sound/wm8776.txt
deleted file mode 100644
index 0117336..0000000
--- a/Bindings/sound/wm8776.txt
+++ /dev/null

@@ -1,18 +0,0 @@
-WM8776 audio CODEC
-
-This device supports both I2C and SPI (configured with pin strapping
-on the board).
-
-Required properties:
-
-  - compatible : "wlf,wm8776"
-
-  - reg : the I2C address of the device for I2C, the chip select
-          number for SPI.
-
-Example:
-
-wm8776: codec@1a {
-	compatible = "wlf,wm8776";
-	reg = <0x1a>;
-};

diff --git a/Bindings/sound/xmos,xvf3500.yaml b/Bindings/sound/xmos,xvf3500.yaml
new file mode 100644
index 0000000..fb77a61
--- /dev/null
+++ b/Bindings/sound/xmos,xvf3500.yaml

@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/xmos,xvf3500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: XMOS XVF3500 VocalFusion Voice Processor
+
+maintainers:
+  - Javier Carrasco <javier.carrasco@wolfvision.net>
+
+description:
+  The XMOS XVF3500 VocalFusion Voice Processor is a low-latency, 32-bit
+  multicore controller for voice processing.
+  https://www.xmos.com/xvf3500/
+
+allOf:
+  - $ref: /schemas/usb/usb-device.yaml#
+
+properties:
+  compatible:
+    const: usb20b1,0013
+
+  reg: true
+
+  reset-gpios:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Regulator for the 1V0 supply.
+
+  vddio-supply:
+    description:
+      Regulator for the 3V3 supply.
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vdd-supply
+  - vddio-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        voice_processor: voice-processor@1 {
+            compatible = "usb20b1,0013";
+            reg = <1>;
+            reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc1v0>;
+            vddio-supply = <&vcc3v3>;
+        };
+    };
+
+...

diff --git a/Bindings/spi/airoha,en7581-snand.yaml b/Bindings/spi/airoha,en7581-snand.yaml
new file mode 100644
index 0000000..b820c56
--- /dev/null
+++ b/Bindings/spi/airoha,en7581-snand.yaml

@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/airoha,en7581-snand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI-NAND flash controller for Airoha ARM SoCs
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: airoha,en7581-snand
+
+  reg:
+    items:
+      - description: spi base address
+      - description: nfi2spi base address
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: spi
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/en7523-clk.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      spi@1fa10000 {
+        compatible = "airoha,en7581-snand";
+        reg = <0x0 0x1fa10000 0x0 0x140>,
+              <0x0 0x1fa11000 0x0 0x160>;
+
+        clocks = <&scuclk EN7523_CLK_SPI>;
+        clock-names = "spi";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+          compatible = "spi-nand";
+          reg = <0>;
+          spi-tx-bus-width = <1>;
+          spi-rx-bus-width = <2>;
+        };
+      };
+    };

diff --git a/Bindings/spi/cdns,qspi-nor.yaml b/Bindings/spi/cdns,qspi-nor.yaml
index cca81f8..d48ecd6 100644
--- a/Bindings/spi/cdns,qspi-nor.yaml
+++ b/Bindings/spi/cdns,qspi-nor.yaml

@@ -68,12 +68,13 @@
       - items:
           - enum:
               - amd,pensando-elba-qspi
-              - ti,k2g-qspi
-              - ti,am654-ospi
               - intel,lgm-qspi
-              - xlnx,versal-ospi-1.0
               - intel,socfpga-qspi
+              - mobileye,eyeq5-ospi
               - starfive,jh7110-qspi
+              - ti,am654-ospi
+              - ti,k2g-qspi
+              - xlnx,versal-ospi-1.0
           - const: cdns,qspi-nor
       - const: cdns,qspi-nor
 
@@ -145,7 +146,6 @@
   - reg
   - interrupts
   - clocks
-  - cdns,fifo-depth
   - cdns,fifo-width
   - cdns,trigger-address
   - '#address-cells'

diff --git a/Bindings/spi/marvell,armada-3700-spi.yaml b/Bindings/spi/marvell,armada-3700-spi.yaml
new file mode 100644
index 0000000..61caa1d
--- /dev/null
+++ b/Bindings/spi/marvell,armada-3700-spi.yaml

@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/marvell,armada-3700-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 3700 SPI Controller
+
+description:
+  The SPI controller on Marvell Armada 3700 SoC.
+
+maintainers:
+  - Kousik Sanagavarapu <five231003@gmail.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: marvell,armada-3700-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  num-cs:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spi0: spi@10600 {
+        compatible = "marvell,armada-3700-spi";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10600 0x5d>;
+        clocks = <&nb_perih_clk 7>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+        num-cs = <4>;
+    };
+...

diff --git a/Bindings/spi/renesas,sh-msiof.yaml b/Bindings/spi/renesas,sh-msiof.yaml
index 00acbbb..49649fc 100644
--- a/Bindings/spi/renesas,sh-msiof.yaml
+++ b/Bindings/spi/renesas,sh-msiof.yaml

@@ -54,6 +54,7 @@
               - renesas,msiof-r8a779a0      # R-Car V3U
               - renesas,msiof-r8a779f0      # R-Car S4-8
               - renesas,msiof-r8a779g0      # R-Car V4H
+              - renesas,msiof-r8a779h0      # R-Car V4M
           - const: renesas,rcar-gen4-msiof  # generic R-Car Gen4
                                             # compatible device
       - items:

diff --git a/Bindings/spi/spi-armada-3700.txt b/Bindings/spi/spi-armada-3700.txt
deleted file mode 100644
index 1564aa8..0000000
--- a/Bindings/spi/spi-armada-3700.txt
+++ /dev/null

@@ -1,25 +0,0 @@
-* Marvell Armada 3700 SPI Controller
-
-Required Properties:
-
-- compatible: should be "marvell,armada-3700-spi"
-- reg: physical base address of the controller and length of memory mapped
-       region.
-- interrupts: The interrupt number. The interrupt specifier format depends on
-	      the interrupt controller and of its driver.
-- clocks: Must contain the clock source, usually from the North Bridge clocks.
-- num-cs: The number of chip selects that is supported by this SPI Controller
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-
-Example:
-
-	spi0: spi@10600 {
-		compatible = "marvell,armada-3700-spi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10600 0x5d>;
-		clocks = <&nb_perih_clk 7>;
-		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-		num-cs = <4>;
-	};

diff --git a/Bindings/spi/st,stm32-qspi.yaml b/Bindings/spi/st,stm32-qspi.yaml
index 8bba965..3f1a27e 100644
--- a/Bindings/spi/st,stm32-qspi.yaml
+++ b/Bindings/spi/st,stm32-qspi.yaml

@@ -46,6 +46,10 @@
       - const: tx
       - const: rx
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

diff --git a/Bindings/spi/st,stm32-spi.yaml b/Bindings/spi/st,stm32-spi.yaml
index 4bd9aeb..a55c863 100644
--- a/Bindings/spi/st,stm32-spi.yaml
+++ b/Bindings/spi/st,stm32-spi.yaml

@@ -52,6 +52,10 @@
       - const: rx
       - const: tx
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

diff --git a/Bindings/spi/ti,qspi.yaml b/Bindings/spi/ti,qspi.yaml
new file mode 100644
index 0000000..626a915
--- /dev/null
+++ b/Bindings/spi/ti,qspi.yaml

@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/ti,qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI QSPI controller
+
+maintainers:
+  - Kousik Sanagavarapu <five231003@gmail.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,am4372-qspi
+      - ti,dra7xxx-qspi
+
+  reg:
+    items:
+      - description: base registers
+      - description: mapped memory
+
+  reg-names:
+    items:
+      - const: qspi_base
+      - const: qspi_mmap
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: fck
+
+  interrupts:
+    maxItems: 1
+
+  num-cs:
+    minimum: 1
+    maximum: 4
+    default: 1
+
+  ti,hwmods:
+    description:
+      Name of the hwmod associated to the QSPI.  This is for legacy
+      platforms only.
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+  syscon-chipselects:
+    description:
+      Handle to system control region containing QSPI chipselect register
+      and offset of that register.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to system control register
+          - description: register offset
+
+  spi-max-frequency:
+    description: Maximum SPI clocking speed of the controller in Hz.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/dra7.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spi@4b300000 {
+        compatible = "ti,dra7xxx-qspi";
+        reg = <0x4b300000 0x100>,
+              <0x5c000000 0x4000000>;
+        reg-names = "qspi_base", "qspi_mmap";
+        syscon-chipselects = <&scm_conf 0x558>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>;
+        clock-names = "fck";
+        num-cs = <4>;
+        spi-max-frequency = <48000000>;
+        interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...

diff --git a/Bindings/spi/ti_qspi.txt b/Bindings/spi/ti_qspi.txt
deleted file mode 100644
index 47b184b..0000000
--- a/Bindings/spi/ti_qspi.txt
+++ /dev/null

@@ -1,53 +0,0 @@
-TI QSPI controller.
-
-Required properties:
-- compatible : should be "ti,dra7xxx-qspi" or "ti,am4372-qspi".
-- reg: Should contain QSPI registers location and length.
-- reg-names: Should contain the resource reg names.
-	- qspi_base: Qspi configuration register Address space
-	- qspi_mmap: Memory mapped Address space
-	- (optional) qspi_ctrlmod: Control module Address space
-- interrupts: should contain the qspi interrupt number.
-- #address-cells, #size-cells : Must be present if the device has sub-nodes
-- ti,hwmods: Name of the hwmod associated to the QSPI
-
-Recommended properties:
-- spi-max-frequency: Definition as per
-                     Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Optional properties:
-- syscon-chipselects: Handle to system control region contains QSPI
-		      chipselect register and offset of that register.
-
-NOTE: TI QSPI controller requires different pinmux and IODelay
-parameters for Mode-0 and Mode-3 operations, which needs to be set up by
-the bootloader (U-Boot). Default configuration only supports Mode-0
-operation. Hence, "spi-cpol" and "spi-cpha" DT properties cannot be
-specified in the slave nodes of TI QSPI controller without appropriate
-modification to bootloader.
-
-Example:
-
-For am4372:
-qspi: qspi@47900000 {
-	compatible = "ti,am4372-qspi";
-	reg = <0x47900000 0x100>, <0x30000000 0x4000000>;
-	reg-names = "qspi_base", "qspi_mmap";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	spi-max-frequency = <25000000>;
-	ti,hwmods = "qspi";
-};
-
-For dra7xx:
-qspi: qspi@4b300000 {
-	compatible = "ti,dra7xxx-qspi";
-	reg = <0x4b300000 0x100>,
-	      <0x5c000000 0x4000000>,
-	reg-names = "qspi_base", "qspi_mmap";
-	syscon-chipselects = <&scm_conf 0x558>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	spi-max-frequency = <48000000>;
-	ti,hwmods = "qspi";
-};

diff --git a/Bindings/spmi/hisilicon,hisi-spmi-controller.yaml b/Bindings/spmi/hisilicon,hisi-spmi-controller.yaml
index f882903..3ccf35d 100644
--- a/Bindings/spmi/hisilicon,hisi-spmi-controller.yaml
+++ b/Bindings/spmi/hisilicon,hisi-spmi-controller.yaml

@@ -14,7 +14,7 @@
   It is a MIPI System Power Management (SPMI) controller.
 
   The PMIC part is provided by
-  ./Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml.
+  Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml.
 
 allOf:
   - $ref: spmi.yaml#
@@ -48,26 +48,23 @@
       PMIC properties, which are specific to the used SPMI PMIC device(s).
       When used in combination with HiSilicon 6421v600, the properties
       are documented at
-      drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml.
+      Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
 
 unevaluatedProperties: false
 
 examples:
   - |
-    bus {
-      #address-cells = <2>;
-      #size-cells = <2>;
+    #include <dt-bindings/spmi/spmi.h>
 
-      spmi: spmi@fff24000 {
+    spmi@fff24000 {
         compatible = "hisilicon,kirin970-spmi-controller";
+        reg = <0xfff24000 0x1000>;
         #address-cells = <2>;
         #size-cells = <0>;
-        reg = <0x0 0xfff24000 0x0 0x1000>;
         hisilicon,spmi-channel = <2>;
 
         pmic@0 {
-          reg = <0 0>;
-          /* pmic properties */
+            reg = <0 SPMI_USID>;
+            /* pmic properties */
         };
-      };
     };

diff --git a/Bindings/spmi/qcom,spmi-pmic-arb.yaml b/Bindings/spmi/qcom,spmi-pmic-arb.yaml
index f983b4a..51daf1b 100644
--- a/Bindings/spmi/qcom,spmi-pmic-arb.yaml
+++ b/Bindings/spmi/qcom,spmi-pmic-arb.yaml

@@ -92,6 +92,7 @@
     description: >
       SPMI bus instance. only applicable to PMIC arbiter version 7 and beyond.
       Supported values, 0 = primary bus, 1 = secondary bus
+    deprecated: true
 
 required:
   - compatible

diff --git a/Bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml b/Bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml
new file mode 100644
index 0000000..a28b70f
--- /dev/null
+++ b/Bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml

@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/qcom,x1e80100-spmi-pmic-arb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm X1E80100 SPMI Controller (PMIC Arbiter v7)
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+
+description: |
+  The X1E80100 SPMI PMIC Arbiter implements HW version 7 and it's an SPMI
+  controller with wrapping arbitration logic to allow for multiple on-chip
+  devices to control up to 2 SPMI separate buses.
+
+  The PMIC Arbiter can also act as an interrupt controller, providing interrupts
+  to slave devices.
+
+properties:
+  compatible:
+    const: qcom,x1e80100-spmi-pmic-arb
+
+  reg:
+    items:
+      - description: core registers
+      - description: tx-channel per virtual slave registers
+      - description: rx-channel (called observer) per virtual slave registers
+
+  reg-names:
+    items:
+      - const: core
+      - const: chnls
+      - const: obsrvr
+
+  ranges: true
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 2
+
+  qcom,ee:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 5
+    description: >
+      indicates the active Execution Environment identifier
+
+  qcom,channel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 5
+    description: >
+      which of the PMIC Arb provided channels to use for accesses
+
+patternProperties:
+  "^spmi@[a-f0-9]+$":
+    type: object
+    $ref: /schemas/spmi/spmi.yaml
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        items:
+          - description: configuration registers
+          - description: interrupt controller registers
+
+      reg-names:
+        items:
+          - const: cnfg
+          - const: intr
+
+      interrupts:
+        maxItems: 1
+
+      interrupt-names:
+        const: periph_irq
+
+      interrupt-controller: true
+
+      '#interrupt-cells':
+        const: 4
+        description: |
+          cell 1: slave ID for the requested interrupt (0-15)
+          cell 2: peripheral ID for requested interrupt (0-255)
+          cell 3: the requested peripheral interrupt (0-7)
+          cell 4: interrupt flags indicating level-sense information,
+                  as defined in dt-bindings/interrupt-controller/irq.h
+
+required:
+  - compatible
+  - reg-names
+  - qcom,ee
+  - qcom,channel
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      spmi: arbiter@c400000 {
+        compatible = "qcom,x1e80100-spmi-pmic-arb";
+        reg = <0 0x0c400000 0 0x3000>,
+              <0 0x0c500000 0 0x4000000>,
+              <0 0x0c440000 0 0x80000>;
+        reg-names = "core", "chnls", "obsrvr";
+
+        qcom,ee = <0>;
+        qcom,channel = <0>;
+
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges;
+
+        spmi_bus0: spmi@c42d000 {
+          reg = <0 0x0c42d000 0 0x4000>,
+                <0 0x0c4c0000 0 0x10000>;
+          reg-names = "cnfg", "intr";
+
+          interrupt-names = "periph_irq";
+          interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+          interrupt-controller;
+          #interrupt-cells = <4>;
+
+          #address-cells = <2>;
+          #size-cells = <0>;
+        };
+      };
+    };

diff --git a/Bindings/thermal/amlogic,thermal.yaml b/Bindings/thermal/amlogic,thermal.yaml
index 20f8f9b..01fccdf 100644
--- a/Bindings/thermal/amlogic,thermal.yaml
+++ b/Bindings/thermal/amlogic,thermal.yaml

@@ -13,11 +13,13 @@
 
 properties:
   compatible:
-    items:
-      - enum:
-          - amlogic,g12a-cpu-thermal
-          - amlogic,g12a-ddr-thermal
-      - const: amlogic,g12a-thermal
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,g12a-cpu-thermal
+              - amlogic,g12a-ddr-thermal
+          - const: amlogic,g12a-thermal
+      - const: amlogic,a1-cpu-thermal
 
   reg:
     maxItems: 1

diff --git a/Bindings/thermal/loongson,ls2k-thermal.yaml b/Bindings/thermal/loongson,ls2k-thermal.yaml
index b634f57..ca81c8a 100644
--- a/Bindings/thermal/loongson,ls2k-thermal.yaml
+++ b/Bindings/thermal/loongson,ls2k-thermal.yaml

@@ -18,13 +18,15 @@
     oneOf:
       - enum:
           - loongson,ls2k1000-thermal
+          - loongson,ls2k2000-thermal
       - items:
           - enum:
-              - loongson,ls2k2000-thermal
+              - loongson,ls2k0500-thermal
           - const: loongson,ls2k1000-thermal
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   interrupts:
     maxItems: 1
@@ -38,6 +40,24 @@
   - interrupts
   - '#thermal-sensor-cells'
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - loongson,ls2k2000-thermal
+
+then:
+  properties:
+    reg:
+      minItems: 2
+      maxItems: 2
+
+else:
+  properties:
+    reg:
+      maxItems: 1
+
 unevaluatedProperties: false
 
 examples:

diff --git a/Bindings/thermal/mediatek,lvts-thermal.yaml b/Bindings/thermal/mediatek,lvts-thermal.yaml
index e6665af..331cf4e 100644
--- a/Bindings/thermal/mediatek,lvts-thermal.yaml
+++ b/Bindings/thermal/mediatek,lvts-thermal.yaml

@@ -19,6 +19,9 @@
   compatible:
     enum:
       - mediatek,mt7988-lvts-ap
+      - mediatek,mt8186-lvts
+      - mediatek,mt8188-lvts-ap
+      - mediatek,mt8188-lvts-mcu
       - mediatek,mt8192-lvts-ap
       - mediatek,mt8192-lvts-mcu
       - mediatek,mt8195-lvts-ap
@@ -60,6 +63,8 @@
         compatible:
           contains:
             enum:
+              - mediatek,mt8188-lvts-ap
+              - mediatek,mt8188-lvts-mcu
               - mediatek,mt8192-lvts-ap
               - mediatek,mt8192-lvts-mcu
     then:
@@ -75,6 +80,7 @@
         compatible:
           contains:
             enum:
+              - mediatek,mt8186-lvts
               - mediatek,mt8195-lvts-ap
               - mediatek,mt8195-lvts-mcu
     then:

diff --git a/Bindings/thermal/qcom-lmh.yaml b/Bindings/thermal/qcom-lmh.yaml
index 5ff72ce..1175bb3 100644
--- a/Bindings/thermal/qcom-lmh.yaml
+++ b/Bindings/thermal/qcom-lmh.yaml

@@ -17,10 +17,14 @@
 
 properties:
   compatible:
-    enum:
-      - qcom,sc8180x-lmh
-      - qcom,sdm845-lmh
-      - qcom,sm8150-lmh
+    oneOf:
+      - enum:
+          - qcom,sc8180x-lmh
+          - qcom,sdm845-lmh
+          - qcom,sm8150-lmh
+      - items:
+          - const: qcom,qcm2290-lmh
+          - const: qcom,sm8150-lmh
 
   reg:
     items:

diff --git a/Bindings/thermal/st,stih407-thermal.yaml b/Bindings/thermal/st,stih407-thermal.yaml
new file mode 100644
index 0000000..9f6fc5c
--- /dev/null
+++ b/Bindings/thermal/st,stih407-thermal.yaml

@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/st,stih407-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi digital thermal sensor (DTS)
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+  - Lee Jones <lee@kernel.org>
+
+allOf:
+  - $ref: thermal-sensor.yaml
+
+properties:
+  compatible:
+    const: st,stih407-thermal
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: thermal
+
+  interrupts:
+    description:
+      For thermal sensors for which no interrupt has been defined, a polling
+      delay of 1000ms will be used to read the temperature from device.
+    maxItems: 1
+
+  '#thermal-sensor-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    temperature-sensor@91a0000 {
+        compatible = "st,stih407-thermal";
+        reg = <0x91a0000 0x28>;
+        clock-names = "thermal";
+        clocks = <&CLK_SYSIN>;
+        interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+        #thermal-sensor-cells = <0>;
+    };
+...

diff --git a/Bindings/thermal/st-thermal.txt b/Bindings/thermal/st-thermal.txt
deleted file mode 100644
index a2f9391..0000000
--- a/Bindings/thermal/st-thermal.txt
+++ /dev/null

@@ -1,32 +0,0 @@
-Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs.
-
-Required parameters:
--------------------
-
-compatible : 	Should be "st,stih407-thermal"
-
-clock-names : 	Should be "thermal".
-		  See: Documentation/devicetree/bindings/resource-names.txt
-clocks : 	Phandle of the clock used by the thermal sensor.
-		  See: Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Optional parameters:
--------------------
-
-reg : 		For non-sysconf based sensors, this should be the physical base
-		address and length of the sensor's registers.
-interrupts :	Standard way to define interrupt number.
-		  NB: For thermal sensor's for which no interrupt has been
-		  defined, a polling delay of 1000ms will be used to read the
-		  temperature from device.
-
-Example:
-
-	temp0@91a0000 {
-		compatible = "st,stih407-thermal";
-		reg = <0x91a0000 0x28>;
-		clock-names = "thermal";
-		clocks = <&CLK_SYSIN>;
-		interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
-		st,passive_cooling_temp = <110>;
-	};

diff --git a/Bindings/timer/renesas,cmt.yaml b/Bindings/timer/renesas,cmt.yaml
index a0be175..5e09c04 100644
--- a/Bindings/timer/renesas,cmt.yaml
+++ b/Bindings/timer/renesas,cmt.yaml

@@ -103,6 +103,7 @@
               - renesas,r8a779a0-cmt0     # 32-bit CMT0 on R-Car V3U
               - renesas,r8a779f0-cmt0     # 32-bit CMT0 on R-Car S4-8
               - renesas,r8a779g0-cmt0     # 32-bit CMT0 on R-Car V4H
+              - renesas,r8a779h0-cmt0     # 32-bit CMT0 on R-Car V4M
           - const: renesas,rcar-gen4-cmt0 # 32-bit CMT0 on R-Car Gen4
 
       - items:
@@ -110,6 +111,7 @@
               - renesas,r8a779a0-cmt1     # 48-bit CMT on R-Car V3U
               - renesas,r8a779f0-cmt1     # 48-bit CMT on R-Car S4-8
               - renesas,r8a779g0-cmt1     # 48-bit CMT on R-Car V4H
+              - renesas,r8a779h0-cmt1     # 48-bit CMT on R-Car V4M
           - const: renesas,rcar-gen4-cmt1 # 48-bit CMT on R-Car Gen4
 
   reg:

diff --git a/Bindings/timer/renesas,ostm.yaml b/Bindings/timer/renesas,ostm.yaml
index 8b06a68..e8c6421 100644
--- a/Bindings/timer/renesas,ostm.yaml
+++ b/Bindings/timer/renesas,ostm.yaml

@@ -26,6 +26,7 @@
           - renesas,r9a07g043-ostm # RZ/G2UL and RZ/Five
           - renesas,r9a07g044-ostm # RZ/G2{L,LC}
           - renesas,r9a07g054-ostm # RZ/V2L
+          - renesas,r9a09g057-ostm # RZ/V2H(P)
       - const: renesas,ostm        # Generic
 
   reg:
@@ -58,6 +59,7 @@
           - renesas,r9a07g043-ostm
           - renesas,r9a07g044-ostm
           - renesas,r9a07g054-ostm
+          - renesas,r9a09g057-ostm
 then:
   required:
     - resets

diff --git a/Bindings/timer/renesas,tmu.yaml b/Bindings/timer/renesas,tmu.yaml
index 84bbe15..360a5cf 100644
--- a/Bindings/timer/renesas,tmu.yaml
+++ b/Bindings/timer/renesas,tmu.yaml

@@ -39,6 +39,7 @@
           - renesas,tmu-r8a779a0 # R-Car V3U
           - renesas,tmu-r8a779f0 # R-Car S4-8
           - renesas,tmu-r8a779g0 # R-Car V4H
+          - renesas,tmu-r8a779h0 # R-Car V4M
       - const: renesas,tmu
 
   reg:

diff --git a/Bindings/tpm/ibm,vtpm.yaml b/Bindings/tpm/ibm,vtpm.yaml
index 50a3fd3..8b0d3d4 100644
--- a/Bindings/tpm/ibm,vtpm.yaml
+++ b/Bindings/tpm/ibm,vtpm.yaml

@@ -33,13 +33,13 @@
   reg:
     maxItems: 1
 
-  'ibm,#dma-address-cells':
+  ibm,#dma-address-cells:
     description:
       number of cells that are used to encode the physical address field of
       dma-window properties
     $ref: /schemas/types.yaml#/definitions/uint32-array
 
-  'ibm,#dma-size-cells':
+  ibm,#dma-size-cells:
     description:
       number of cells that are used to encode the size field of
       dma-window properties

diff --git a/Bindings/tpm/tcg,tpm-tis-i2c.yaml b/Bindings/tpm/tcg,tpm-tis-i2c.yaml
index 3ab4434..af7720d 100644
--- a/Bindings/tpm/tcg,tpm-tis-i2c.yaml
+++ b/Bindings/tpm/tcg,tpm-tis-i2c.yaml

@@ -32,6 +32,7 @@
           - enum:
               - infineon,slb9673
               - nuvoton,npct75x
+              - st,st33ktpm2xi2c
           - const: tcg,tpm-tis-i2c
 
       - description: TPM 1.2 and 2.0 chips with vendor-specific I²C interface

diff --git a/Bindings/trivial-devices.yaml b/Bindings/trivial-devices.yaml
index e07be7b..0a41945 100644
--- a/Bindings/trivial-devices.yaml
+++ b/Bindings/trivial-devices.yaml

@@ -126,6 +126,8 @@
           - ibm,cffps1
             # IBM Common Form Factor Power Supply Versions 2
           - ibm,cffps2
+            # IBM On-Chip Controller hwmon device
+          - ibm,p8-occ-hwmon
             # Infineon barometric pressure and temperature sensor
           - infineon,dps310
             # Infineon IR36021 digital POL buck controller
@@ -134,6 +136,8 @@
           - infineon,irps5401
             # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
           - infineon,tlv493d-a1b6
+            # Infineon Hot-swap controller xdp710
+          - infineon,xdp710
             # Infineon Multi-phase Digital VR Controller xdpe11280
           - infineon,xdpe11280
             # Infineon Multi-phase Digital VR Controller xdpe12254
@@ -160,6 +164,8 @@
           - isil,isl29030
             # Intersil ISL68137 Digital Output Configurable PWM Controller
           - isil,isl68137
+            # Intersil ISL69269 PMBus Voltage Regulator
+          - isil,isl69269
             # Intersil ISL76682 Ambient Light Sensor
           - isil,isl76682
             # Linear Technology LTC2488

diff --git a/Bindings/ufs/samsung,exynos-ufs.yaml b/Bindings/ufs/samsung,exynos-ufs.yaml
index b2b509b..7208798 100644
--- a/Bindings/ufs/samsung,exynos-ufs.yaml
+++ b/Bindings/ufs/samsung,exynos-ufs.yaml

@@ -12,12 +12,10 @@
 description: |
   Each Samsung UFS host controller instance should have its own node.
 
-allOf:
-  - $ref: ufs-common.yaml
-
 properties:
   compatible:
     enum:
+      - google,gs101-ufs
       - samsung,exynos7-ufs
       - samsung,exynosautov9-ufs
       - samsung,exynosautov9-ufs-vh
@@ -38,14 +36,24 @@
       - const: ufsp
 
   clocks:
+    minItems: 2
     items:
       - description: ufs link core clock
       - description: unipro main clock
+      - description: fmp clock
+      - description: ufs aclk clock
+      - description: ufs pclk clock
+      - description: sysreg clock
 
   clock-names:
+    minItems: 2
     items:
       - const: core_clk
       - const: sclk_unipro_main
+      - const: fmp
+      - const: aclk
+      - const: pclk
+      - const: sysreg
 
   phys:
     maxItems: 1
@@ -72,6 +80,30 @@
   - clocks
   - clock-names
 
+allOf:
+  - $ref: ufs-common.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: google,gs101-ufs
+
+    then:
+      properties:
+        clocks:
+          minItems: 6
+
+        clock-names:
+          minItems: 6
+
+    else:
+      properties:
+        clocks:
+          maxItems: 2
+
+        clock-names:
+          maxItems: 2
+
 unevaluatedProperties: false
 
 examples:

diff --git a/Bindings/usb/chipidea,usb2-common.yaml b/Bindings/usb/chipidea,usb2-common.yaml
new file mode 100644
index 0000000..d2a7d2e
--- /dev/null
+++ b/Bindings/usb/chipidea,usb2-common.yaml

@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/chipidea,usb2-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB2 ChipIdea USB controller Common Properties
+
+maintainers:
+  - Xu Yang <xu.yang_2@nxp.com>
+
+properties:
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  dr_mode: true
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+  phy_type: true
+
+  itc-setting:
+    description:
+      interrupt threshold control register control, the setting should be
+      aligned with ITC bits at register USBCMD.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ahb-burst-config:
+    description:
+      it is vendor dependent, the required value should be aligned with
+      AHBBRST at SBUSCFG, the range is from 0x0 to 0x7. This property is
+      used to change AHB burst configuration, check the chipidea spec for
+      meaning of each value. If this property is not existed, it will use
+      the reset value.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0x7
+
+  tx-burst-size-dword:
+    description:
+      it is vendor dependent, the tx burst size in dword (4 bytes), This
+      register represents the maximum length of a the burst in 32-bit
+      words while moving data from system memory to the USB bus, the value
+      of this property will only take effect if property "ahb-burst-config"
+      is set to 0, if this property is missing the reset default of the
+      hardware implementation will be used.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0x20
+
+  rx-burst-size-dword:
+    description:
+      it is vendor dependent, the rx burst size in dword (4 bytes), This
+      register represents the maximum length of a the burst in 32-bit words
+      while moving data from the USB bus to system memory, the value of
+      this property will only take effect if property "ahb-burst-config"
+      is set to 0, if this property is missing the reset default of the
+      hardware implementation will be used.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0x20
+
+  extcon:
+    description:
+      Phandles to external connector devices. First phandle should point
+      to external connector, which provide "USB" cable events, the second
+      should point to external connector device, which provide "USB-HOST"
+      cable events. If one of the external connector devices is not
+      required, empty <0> phandle should be specified.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    items:
+      - description: vbus extcon
+      - description: id extcon
+
+  phy-clkgate-delay-us:
+    description:
+      The delay time (us) between putting the PHY into low power mode and
+      gating the PHY clock.
+
+  non-zero-ttctrl-ttha:
+    description:
+      After setting this property, the value of register ttctrl.ttha
+      will be 0x7f; if not, the value will be 0x0, this is the default
+      value. It needs to be very carefully for setting this property, it
+      is recommended that consult with your IC engineer before setting
+      this value.  On the most of chipidea platforms, the "usage_tt" flag
+      at RTL is 0, so this property only affects siTD.
+
+      If this property is not set, the max packet size is 1023 bytes, and
+      if the total of packet size for previous transactions are more than
+      256 bytes, it can't accept any transactions within this frame. The
+      use case is single transaction, but higher frame rate.
+
+      If this property is set, the max packet size is 188 bytes, it can
+      handle more transactions than above case, it can accept transactions
+      until it considers the left room size within frame is less than 188
+      bytes, software needs to make sure it does not send more than 90%
+      maximum_periodic_data_per_frame. The use case is multiple
+      transactions, but less frame rate.
+    type: boolean
+
+  mux-controls:
+    description:
+      The mux control for toggling host/device output of this controller.
+      It's expected that a mux state of 0 indicates device mode and a mux
+      state of 1 indicates host mode.
+    maxItems: 1
+
+  mux-control-names:
+    const: usb_switch
+
+  pinctrl-names:
+    description:
+      Names for optional pin modes in "default", "host", "device".
+      In case of HSIC-mode, "idle" and "active" pin modes are mandatory.
+      In this case, the "idle" state needs to pull down the data and
+      strobe pin and the "active" state needs to pull up the strobe pin.
+    oneOf:
+      - items:
+          - const: idle
+          - const: active
+      - items:
+          - const: default
+          - const: host
+          - const: device
+      - items:
+          - const: default
+          - enum:
+              - host
+              - device
+      - items:
+          - const: default
+
+  pinctrl-0:
+    maxItems: 1
+
+  pinctrl-1:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: usb-phy
+
+  vbus-supply:
+    description: reference to the VBUS regulator.
+
+  usb-phy:
+    description: phandle for the PHY device. Use "phys" instead.
+    maxItems: 1
+    deprecated: true
+
+  port:
+    description:
+      Any connector to the data bus of this controller should be modelled
+      using the OF graph bindings specified, if the "usb-role-switch"
+      property is used.
+    $ref: /schemas/graph.yaml#/properties/port
+
+  reset-gpios:
+    maxItems: 1
+
+dependencies:
+  port: [ usb-role-switch ]
+  mux-controls: [ mux-control-names ]
+
+required:
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: usb-hcd.yaml#
+  - $ref: usb-drd.yaml#
+
+additionalProperties: true

diff --git a/Bindings/usb/chipidea,usb2-imx.yaml b/Bindings/usb/chipidea,usb2-imx.yaml
new file mode 100644
index 0000000..8f6136f
--- /dev/null
+++ b/Bindings/usb/chipidea,usb2-imx.yaml

@@ -0,0 +1,287 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/chipidea,usb2-imx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP USB2 ChipIdea USB controller
+
+maintainers:
+  - Xu Yang <xu.yang_2@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx27-usb
+      - items:
+          - enum:
+              - fsl,imx23-usb
+              - fsl,imx25-usb
+              - fsl,imx28-usb
+              - fsl,imx35-usb
+              - fsl,imx50-usb
+              - fsl,imx51-usb
+              - fsl,imx53-usb
+              - fsl,imx6q-usb
+              - fsl,imx6sl-usb
+              - fsl,imx6sx-usb
+              - fsl,imx6ul-usb
+              - fsl,imx7d-usb
+              - fsl,vf610-usb
+          - const: fsl,imx27-usb
+      - items:
+          - enum:
+              - fsl,imx8dxl-usb
+              - fsl,imx8ulp-usb
+          - const: fsl,imx7ulp-usb
+          - const: fsl,imx6ul-usb
+      - items:
+          - enum:
+              - fsl,imx8mm-usb
+              - fsl,imx8mn-usb
+              - fsl,imx93-usb
+          - const: fsl,imx7d-usb
+          - const: fsl,imx27-usb
+      - items:
+          - enum:
+              - fsl,imx6sll-usb
+              - fsl,imx7ulp-usb
+          - const: fsl,imx6ul-usb
+          - const: fsl,imx27-usb
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  fsl,usbmisc:
+    description:
+      Phandler of non-core register device, with one argument that
+      indicate usb controller index
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to usbmisc node
+          - description: index of usb controller
+
+  disable-over-current:
+    type: boolean
+    description: disable over current detect
+
+  over-current-active-low:
+    type: boolean
+    description: over current signal polarity is active low
+
+  over-current-active-high:
+    type: boolean
+    description:
+      Over current signal polarity is active high. It's recommended to
+      specify the over current polarity.
+
+  power-active-high:
+    type: boolean
+    description: power signal polarity is active high
+
+  external-vbus-divider:
+    type: boolean
+    description: enables off-chip resistor divider for Vbus
+
+  samsung,picophy-pre-emp-curr-control:
+    description:
+      HS Transmitter Pre-Emphasis Current Control. This signal controls
+      the amount of current sourced to the USB_OTG*_DP and USB_OTG*_DN
+      pins after a J-to-K or K-to-J transition. The range is from 0x0 to
+      0x3, the default value is 0x1. Details can refer to TXPREEMPAMPTUNE0
+      bits of USBNC_n_PHY_CFG1.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0x3
+
+  samsung,picophy-dc-vol-level-adjust:
+    description:
+      HS DC Voltage Level Adjustment. Adjust the high-speed transmitter DC
+      level voltage. The range is from 0x0 to 0xf, the default value is
+      0x3. Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0xf
+
+  fsl,picophy-rise-fall-time-adjust:
+    description:
+      HS Transmitter Rise/Fall Time Adjustment. Adjust the rise/fall times
+      of the high-speed transmitter waveform. It has no unit. The rise/fall
+      time will be increased or decreased by a certain percentage relative
+      to design default time. (0:-10%; 1:design default; 2:+15%; 3:+20%)
+      Details can refer to TXRISETUNE0 bit of USBNC_n_PHY_CFG1.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    default: 1
+
+  fsl,usbphy:
+    description: phandle of usb phy that connects to the port. Use "phys" instead.
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+required:
+  - compatible
+
+allOf:
+  - $ref: chipidea,usb2-common.yaml#
+  - if:
+      properties:
+        phy_type:
+          const: hsic
+      required:
+        - phy_type
+    then:
+      properties:
+        pinctrl-names:
+          items:
+            - const: idle
+            - const: active
+
+  # imx27 Soc needs three clocks
+  - if:
+      properties:
+        compatible:
+          const: fsl,imx27-usb
+    then:
+      properties:
+        clocks:
+          minItems: 3
+        clock-names:
+          items:
+            - const: ipg
+            - const: ahb
+            - const: per
+
+  # imx25 and imx35 Soc need three clocks
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx25-usb
+              - fsl,imx35-usb
+    then:
+      properties:
+        clocks:
+          minItems: 3
+        clock-names:
+          items:
+            - const: ipg
+            - const: ahb
+            - const: per
+
+  # imx93 Soc needs two clocks
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx93-usb
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: usb_ctrl_root
+            - const: usb_wakeup
+
+  # imx7d Soc need one clock
+  - if:
+      properties:
+        compatible:
+          items:
+            - const: fsl,imx7d-usb
+            - const: fsl,imx27-usb
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names: false
+
+  # other Soc need one clock
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx23-usb
+              - fsl,imx28-usb
+              - fsl,imx50-usb
+              - fsl,imx51-usb
+              - fsl,imx53-usb
+              - fsl,imx6q-usb
+              - fsl,imx6sl-usb
+              - fsl,imx6sx-usb
+              - fsl,imx6ul-usb
+              - fsl,imx8mm-usb
+              - fsl,imx8mn-usb
+              - fsl,vf610-usb
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx7d-clock.h>
+
+    usb@30b10000 {
+        compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+        reg = <0x30b10000 0x200>;
+        interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX7D_USB_CTRL_CLK>;
+        fsl,usbphy = <&usbphynop1>;
+        fsl,usbmisc = <&usbmisc1 0>;
+        phy-clkgate-delay-us = <400>;
+    };
+
+  # Example for HSIC:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    usb@2184400 {
+        compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+        reg = <0x02184400 0x200>;
+        interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_USBOH3>;
+        fsl,usbphy = <&usbphynop1>;
+        fsl,usbmisc = <&usbmisc 2>;
+        phy_type = "hsic";
+        dr_mode = "host";
+        ahb-burst-config = <0x0>;
+        tx-burst-size-dword = <0x10>;
+        rx-burst-size-dword = <0x10>;
+        pinctrl-names = "idle", "active";
+        pinctrl-0 = <&pinctrl_usbh2_idle>;
+        pinctrl-1 = <&pinctrl_usbh2_active>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@1 {
+            compatible = "usb424,9730";
+            reg = <1>;
+        };
+    };
+
+...

diff --git a/Bindings/usb/ci-hdrc-usb2.yaml b/Bindings/usb/ci-hdrc-usb2.yaml
index 3b56e0e..cc5787a 100644
--- a/Bindings/usb/ci-hdrc-usb2.yaml
+++ b/Bindings/usb/ci-hdrc-usb2.yaml

@@ -15,7 +15,6 @@
     oneOf:
       - enum:
           - chipidea,usb2
-          - fsl,imx27-usb
           - lsi,zevio-usb
           - nuvoton,npcm750-udc
           - nvidia,tegra20-ehci
@@ -32,40 +31,6 @@
               - nvidia,tegra210-ehci
           - const: nvidia,tegra30-ehci
       - items:
-          - enum:
-              - fsl,imx23-usb
-              - fsl,imx25-usb
-              - fsl,imx28-usb
-              - fsl,imx35-usb
-              - fsl,imx50-usb
-              - fsl,imx51-usb
-              - fsl,imx53-usb
-              - fsl,imx6q-usb
-              - fsl,imx6sl-usb
-              - fsl,imx6sx-usb
-              - fsl,imx6ul-usb
-              - fsl,imx7d-usb
-              - fsl,vf610-usb
-          - const: fsl,imx27-usb
-      - items:
-          - enum:
-              - fsl,imx8dxl-usb
-              - fsl,imx8ulp-usb
-          - const: fsl,imx7ulp-usb
-          - const: fsl,imx6ul-usb
-      - items:
-          - enum:
-              - fsl,imx8mm-usb
-              - fsl,imx8mn-usb
-          - const: fsl,imx7d-usb
-          - const: fsl,imx27-usb
-      - items:
-          - enum:
-              - fsl,imx6sll-usb
-              - fsl,imx7ulp-usb
-          - const: fsl,imx6ul-usb
-          - const: fsl,imx27-usb
-      - items:
           - const: xlnx,zynq-usb-2.20a
           - const: chipidea,usb2
       - items:
@@ -73,163 +38,18 @@
               - nuvoton,npcm845-udc
           - const: nuvoton,npcm750-udc
 
-  reg:
-    minItems: 1
-    maxItems: 2
-
-  interrupts:
-    minItems: 1
-    maxItems: 2
-
   clocks:
     minItems: 1
-    maxItems: 3
+    maxItems: 2
 
   clock-names:
     minItems: 1
-    maxItems: 3
-
-  dr_mode: true
-
-  power-domains:
-    maxItems: 1
-
-  resets:
-    maxItems: 1
-
-  reset-names:
-    maxItems: 1
-
-  "#reset-cells":
-    const: 1
-
-  phy_type: true
-
-  itc-setting:
-    description:
-      interrupt threshold control register control, the setting should be
-      aligned with ITC bits at register USBCMD.
-    $ref: /schemas/types.yaml#/definitions/uint32
-
-  ahb-burst-config:
-    description:
-      it is vendor dependent, the required value should be aligned with
-      AHBBRST at SBUSCFG, the range is from 0x0 to 0x7. This property is
-      used to change AHB burst configuration, check the chipidea spec for
-      meaning of each value. If this property is not existed, it will use
-      the reset value.
-    $ref: /schemas/types.yaml#/definitions/uint32
-    minimum: 0x0
-    maximum: 0x7
-
-  tx-burst-size-dword:
-    description:
-      it is vendor dependent, the tx burst size in dword (4 bytes), This
-      register represents the maximum length of a the burst in 32-bit
-      words while moving data from system memory to the USB bus, the value
-      of this property will only take effect if property "ahb-burst-config"
-      is set to 0, if this property is missing the reset default of the
-      hardware implementation will be used.
-    $ref: /schemas/types.yaml#/definitions/uint32
-    minimum: 0x0
-    maximum: 0x20
-
-  rx-burst-size-dword:
-    description:
-      it is vendor dependent, the rx burst size in dword (4 bytes), This
-      register represents the maximum length of a the burst in 32-bit words
-      while moving data from the USB bus to system memory, the value of
-      this property will only take effect if property "ahb-burst-config"
-      is set to 0, if this property is missing the reset default of the
-      hardware implementation will be used.
-    $ref: /schemas/types.yaml#/definitions/uint32
-    minimum: 0x0
-    maximum: 0x20
-
-  extcon:
-    description:
-      Phandles to external connector devices. First phandle should point
-      to external connector, which provide "USB" cable events, the second
-      should point to external connector device, which provide "USB-HOST"
-      cable events. If one of the external connector devices is not
-      required, empty <0> phandle should be specified.
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    minItems: 1
-    items:
-      - description: vbus extcon
-      - description: id extcon
-
-  phy-clkgate-delay-us:
-    description:
-      The delay time (us) between putting the PHY into low power mode and
-      gating the PHY clock.
-
-  non-zero-ttctrl-ttha:
-    description:
-      After setting this property, the value of register ttctrl.ttha
-      will be 0x7f; if not, the value will be 0x0, this is the default
-      value. It needs to be very carefully for setting this property, it
-      is recommended that consult with your IC engineer before setting
-      this value.  On the most of chipidea platforms, the "usage_tt" flag
-      at RTL is 0, so this property only affects siTD.
-
-      If this property is not set, the max packet size is 1023 bytes, and
-      if the total of packet size for previous transactions are more than
-      256 bytes, it can't accept any transactions within this frame. The
-      use case is single transaction, but higher frame rate.
-
-      If this property is set, the max packet size is 188 bytes, it can
-      handle more transactions than above case, it can accept transactions
-      until it considers the left room size within frame is less than 188
-      bytes, software needs to make sure it does not send more than 90%
-      maximum_periodic_data_per_frame. The use case is multiple
-      transactions, but less frame rate.
-    type: boolean
-
-  mux-controls:
-    description:
-      The mux control for toggling host/device output of this controller.
-      It's expected that a mux state of 0 indicates device mode and a mux
-      state of 1 indicates host mode.
-    maxItems: 1
-
-  mux-control-names:
-    const: usb_switch
+    maxItems: 2
 
   operating-points-v2:
     description: A phandle to the OPP table containing the performance states.
     $ref: /schemas/types.yaml#/definitions/phandle
 
-  pinctrl-names:
-    description:
-      Names for optional pin modes in "default", "host", "device".
-      In case of HSIC-mode, "idle" and "active" pin modes are mandatory.
-      In this case, the "idle" state needs to pull down the data and
-      strobe pin and the "active" state needs to pull up the strobe pin.
-    oneOf:
-      - items:
-          - const: idle
-          - const: active
-      - items:
-          - const: default
-          - enum:
-              - host
-              - device
-      - items:
-          - const: default
-
-  pinctrl-0:
-    maxItems: 1
-
-  pinctrl-1:
-    maxItems: 1
-
-  phys:
-    maxItems: 1
-
-  phy-names:
-    const: usb-phy
-
   phy-select:
     description:
       Phandler of TCSR node with two argument that indicate register
@@ -240,87 +60,6 @@
       - description: register offset
       - description: phy index
 
-  vbus-supply:
-    description: reference to the VBUS regulator.
-
-  fsl,usbmisc:
-    description:
-      Phandler of non-core register device, with one argument that
-      indicate usb controller index
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    items:
-      - items:
-          - description: phandle to usbmisc node
-          - description: index of usb controller
-
-  fsl,anatop:
-    description: phandle for the anatop node.
-    $ref: /schemas/types.yaml#/definitions/phandle
-
-  disable-over-current:
-    type: boolean
-    description: disable over current detect
-
-  over-current-active-low:
-    type: boolean
-    description: over current signal polarity is active low
-
-  over-current-active-high:
-    type: boolean
-    description:
-      Over current signal polarity is active high. It's recommended to
-      specify the over current polarity.
-
-  power-active-high:
-    type: boolean
-    description: power signal polarity is active high
-
-  external-vbus-divider:
-    type: boolean
-    description: enables off-chip resistor divider for Vbus
-
-  samsung,picophy-pre-emp-curr-control:
-    description:
-      HS Transmitter Pre-Emphasis Current Control. This signal controls
-      the amount of current sourced to the USB_OTG*_DP and USB_OTG*_DN
-      pins after a J-to-K or K-to-J transition. The range is from 0x0 to
-      0x3, the default value is 0x1. Details can refer to TXPREEMPAMPTUNE0
-      bits of USBNC_n_PHY_CFG1.
-    $ref: /schemas/types.yaml#/definitions/uint32
-    minimum: 0x0
-    maximum: 0x3
-
-  samsung,picophy-dc-vol-level-adjust:
-    description:
-      HS DC Voltage Level Adjustment. Adjust the high-speed transmitter DC
-      level voltage. The range is from 0x0 to 0xf, the default value is
-      0x3. Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1.
-    $ref: /schemas/types.yaml#/definitions/uint32
-    minimum: 0x0
-    maximum: 0xf
-
-  fsl,picophy-rise-fall-time-adjust:
-    description:
-      HS Transmitter Rise/Fall Time Adjustment. Adjust the rise/fall times
-      of the high-speed transmitter waveform. It has no unit. The rise/fall
-      time will be increased or decreased by a certain percentage relative
-      to design default time. (0:-10%; 1:design default; 2:+15%; 3:+20%)
-      Details can refer to TXRISETUNE0 bit of USBNC_n_PHY_CFG1.
-    $ref: /schemas/types.yaml#/definitions/uint32
-    minimum: 0
-    maximum: 3
-    default: 1
-
-  usb-phy:
-    description: phandle for the PHY device. Use "phys" instead.
-    maxItems: 1
-    deprecated: true
-
-  fsl,usbphy:
-    description: phandle of usb phy that connects to the port. Use "phys" instead.
-    $ref: /schemas/types.yaml#/definitions/phandle
-    deprecated: true
-
   nvidia,phy:
     description: phandle of usb phy that connects to the port. Use "phys" instead.
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -331,16 +70,6 @@
     type: boolean
     deprecated: true
 
-  port:
-    description:
-      Any connector to the data bus of this controller should be modelled
-      using the OF graph bindings specified, if the "usb-role-switch"
-      property is used.
-    $ref: /schemas/graph.yaml#/properties/port
-
-  reset-gpios:
-    maxItems: 1
-
   ulpi:
     type: object
     additionalProperties: false
@@ -350,67 +79,13 @@
         type: object
         $ref: /schemas/phy/qcom,usb-hs-phy.yaml
 
-dependencies:
-  port: [ usb-role-switch ]
-  mux-controls: [ mux-control-names ]
-
 required:
   - compatible
-  - reg
-  - interrupts
 
 allOf:
+  - $ref: chipidea,usb2-common.yaml#
   - $ref: usb-hcd.yaml#
   - $ref: usb-drd.yaml#
-  - if:
-      properties:
-        phy_type:
-          const: hsic
-      required:
-        - phy_type
-    then:
-      properties:
-        pinctrl-names:
-          items:
-            - const: idle
-            - const: active
-    else:
-      properties:
-        pinctrl-names:
-          minItems: 1
-          maxItems: 2
-          oneOf:
-            - items:
-                - const: default
-                - enum:
-                    - host
-                    - device
-            - items:
-                - const: default
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - chipidea,usb2
-              - lsi,zevio-usb
-              - nuvoton,npcm750-udc
-              - nvidia,tegra20-udc
-              - nvidia,tegra30-udc
-              - nvidia,tegra114-udc
-              - nvidia,tegra124-udc
-              - qcom,ci-hdrc
-              - xlnx,zynq-usb-2.20a
-    then:
-      properties:
-        fsl,usbmisc: false
-        disable-over-current: false
-        over-current-active-low: false
-        over-current-active-high: false
-        power-active-high: false
-        external-vbus-divider: false
-        samsung,picophy-pre-emp-curr-control: false
-        samsung,picophy-dc-vol-level-adjust: false
 
 unevaluatedProperties: false
 
@@ -438,33 +113,4 @@
         mux-control-names = "usb_switch";
     };
 
-  # Example for HSIC:
-  - |
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/clock/imx6qdl-clock.h>
-
-    usb@2184400 {
-        compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
-        reg = <0x02184400 0x200>;
-        interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&clks IMX6QDL_CLK_USBOH3>;
-        fsl,usbphy = <&usbphynop1>;
-        fsl,usbmisc = <&usbmisc 2>;
-        phy_type = "hsic";
-        dr_mode = "host";
-        ahb-burst-config = <0x0>;
-        tx-burst-size-dword = <0x10>;
-        rx-burst-size-dword = <0x10>;
-        pinctrl-names = "idle", "active";
-        pinctrl-0 = <&pinctrl_usbh2_idle>;
-        pinctrl-1 = <&pinctrl_usbh2_active>;
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        ethernet@1 {
-            compatible = "usb424,9730";
-            reg = <1>;
-        };
-    };
-
 ...

diff --git a/Bindings/usb/cypress,hx3.yaml b/Bindings/usb/cypress,hx3.yaml
index 2809661..e44e88d 100644
--- a/Bindings/usb/cypress,hx3.yaml
+++ b/Bindings/usb/cypress,hx3.yaml

@@ -51,7 +51,6 @@
     #include <dt-bindings/gpio/gpio.h>
 
     usb {
-        dr_mode = "host";
         #address-cells = <1>;
         #size-cells = <0>;
 

diff --git a/Bindings/usb/dwc2.yaml b/Bindings/usb/dwc2.yaml
index 0a5c98e..4f36a22 100644
--- a/Bindings/usb/dwc2.yaml
+++ b/Bindings/usb/dwc2.yaml

@@ -59,6 +59,7 @@
       - const: amcc,dwc-otg
       - const: apm,apm82181-dwc-otg
       - const: snps,dwc2
+      - const: sophgo,cv1800-usb
       - const: st,stm32f4x9-fsotg
       - const: st,stm32f4x9-hsotg
       - const: st,stm32f7-hsotg
@@ -172,6 +173,10 @@
 
   tpl-support: true
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 dependencies:
   port: [ usb-role-switch ]
   role-switch-default-mode: [ usb-role-switch ]

diff --git a/Bindings/usb/fsl,usbmisc.yaml b/Bindings/usb/fsl,usbmisc.yaml
index 2d3589d..0a6e7ac 100644
--- a/Bindings/usb/fsl,usbmisc.yaml
+++ b/Bindings/usb/fsl,usbmisc.yaml

@@ -33,6 +33,7 @@
               - fsl,imx7ulp-usbmisc
               - fsl,imx8mm-usbmisc
               - fsl,imx8mn-usbmisc
+              - fsl,imx8ulp-usbmisc
           - const: fsl,imx7d-usbmisc
           - const: fsl,imx6q-usbmisc
       - items:

diff --git a/Bindings/usb/mediatek,mtk-xhci.yaml b/Bindings/usb/mediatek,mtk-xhci.yaml
index 924fd3d..ef3143f 100644
--- a/Bindings/usb/mediatek,mtk-xhci.yaml
+++ b/Bindings/usb/mediatek,mtk-xhci.yaml

@@ -29,6 +29,7 @@
           - mediatek,mt7623-xhci
           - mediatek,mt7629-xhci
           - mediatek,mt7986-xhci
+          - mediatek,mt7988-xhci
           - mediatek,mt8173-xhci
           - mediatek,mt8183-xhci
           - mediatek,mt8186-xhci

diff --git a/Bindings/usb/microchip,usb2514.yaml b/Bindings/usb/microchip,usb2514.yaml
new file mode 100644
index 0000000..783c275
--- /dev/null
+++ b/Bindings/usb/microchip,usb2514.yaml

@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/microchip,usb2514.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip USB2514 Hub Controller
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+allOf:
+  - $ref: usb-hcd.yaml#
+
+properties:
+  compatible:
+    enum:
+      - usb424,2412
+      - usb424,2417
+      - usb424,2514
+
+  reg: true
+
+  reset-gpios:
+    description: GPIO connected to the RESET_N pin.
+
+  vdd-supply:
+    description: 3.3V power supply.
+
+  clocks:
+    description: External 24MHz clock connected to the CLKIN pin.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        usb-hub@1 {
+            compatible = "usb424,2514";
+            reg = <1>;
+            clocks = <&clks IMX6QDL_CLK_CKO>;
+            reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&reg_3v3_hub>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet@1 {
+                compatible = "usbb95,772b";
+                reg = <1>;
+            };
+        };
+    };

diff --git a/Bindings/usb/qcom,dwc3.yaml b/Bindings/usb/qcom,dwc3.yaml
index 38a3404..cf633d4 100644
--- a/Bindings/usb/qcom,dwc3.yaml
+++ b/Bindings/usb/qcom,dwc3.yaml

@@ -26,10 +26,12 @@
           - qcom,msm8998-dwc3
           - qcom,qcm2290-dwc3
           - qcom,qcs404-dwc3
+          - qcom,qdu1000-dwc3
           - qcom,sa8775p-dwc3
           - qcom,sc7180-dwc3
           - qcom,sc7280-dwc3
           - qcom,sc8280xp-dwc3
+          - qcom,sc8280xp-dwc3-mp
           - qcom,sdm660-dwc3
           - qcom,sdm670-dwc3
           - qcom,sdm845-dwc3
@@ -117,11 +119,11 @@
                                exception of SDM670/SDM845/SM6350.
         - ss_phy_irq: Used for remote wakeup in Super Speed mode of operation.
     minItems: 2
-    maxItems: 5
+    maxItems: 18
 
   interrupt-names:
     minItems: 2
-    maxItems: 5
+    maxItems: 18
 
   qcom,select-utmi-as-pipe-clk:
     description:
@@ -245,6 +247,7 @@
           contains:
             enum:
               - qcom,ipq8074-dwc3
+              - qcom,qdu1000-dwc3
     then:
       properties:
         clocks:
@@ -282,6 +285,7 @@
           contains:
             enum:
               - qcom,sc8280xp-dwc3
+              - qcom,sc8280xp-dwc3-mp
               - qcom,x1e80100-dwc3
     then:
       properties:
@@ -440,6 +444,7 @@
               - qcom,ipq4019-dwc3
               - qcom,ipq8064-dwc3
               - qcom,msm8994-dwc3
+              - qcom,qdu1000-dwc3
               - qcom,sa8775p-dwc3
               - qcom,sc7180-dwc3
               - qcom,sc7280-dwc3
@@ -470,6 +475,38 @@
             - const: dm_hs_phy_irq
             - const: ss_phy_irq
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-dwc3-mp
+    then:
+      properties:
+        interrupts:
+          minItems: 18
+          maxItems: 18
+        interrupt-names:
+          items:
+            - const: pwr_event_1
+            - const: pwr_event_2
+            - const: pwr_event_3
+            - const: pwr_event_4
+            - const: hs_phy_1
+            - const: hs_phy_2
+            - const: hs_phy_3
+            - const: hs_phy_4
+            - const: dp_hs_phy_1
+            - const: dm_hs_phy_1
+            - const: dp_hs_phy_2
+            - const: dm_hs_phy_2
+            - const: dp_hs_phy_3
+            - const: dm_hs_phy_3
+            - const: dp_hs_phy_4
+            - const: dm_hs_phy_4
+            - const: ss_phy_1
+            - const: ss_phy_2
+
 additionalProperties: false
 
 examples:

diff --git a/Bindings/usb/qcom,pmic-typec.yaml b/Bindings/usb/qcom,pmic-typec.yaml
index d969457..6d3ef36 100644
--- a/Bindings/usb/qcom,pmic-typec.yaml
+++ b/Bindings/usb/qcom,pmic-typec.yaml

@@ -21,6 +21,7 @@
       - items:
           - enum:
               - qcom,pm6150-typec
+              - qcom,pm7250b-typec
           - const: qcom,pm8150b-typec
       - items:
           - enum:
@@ -192,17 +193,24 @@
 
                     port@0 {
                         reg = <0>;
-                        pmic_typec_mux_out: endpoint {
-                            remote-endpoint = <&usb_phy_typec_mux_in>;
+                        pmic_typec_hs_in: endpoint {
+                            remote-endpoint = <&usb_hs_out>;
                         };
                     };
 
                     port@1 {
                         reg = <1>;
-                        pmic_typec_role_switch_out: endpoint {
-                            remote-endpoint = <&usb_role_switch_in>;
+                        pmic_typec_ss_in: endpoint {
+                            remote-endpoint = <&usb_phy_typec_ss_out>;
                         };
                     };
+
+                    port@2 {
+                        reg = <2>;
+                        pmic_typec_sbu: endpoint {
+                            remote-endpoint = <&usb_mux_sbu>;
+                        };
+                    };
                 };
             };
         };
@@ -212,17 +220,28 @@
         dr_mode = "otg";
         usb-role-switch;
         port {
-            usb_role_switch_in: endpoint {
-                remote-endpoint = <&pmic_typec_role_switch_out>;
+            usb_hs_out: endpoint {
+                remote-endpoint = <&pmic_typec_hs_in>;
             };
         };
     };
 
     usb-phy {
         orientation-switch;
+        port {
+            usb_phy_typec_ss_out: endpoint {
+                remote-endpoint = <&pmic_typec_ss_in>;
+            };
+        };
+    };
+
+    usb-mux {
+        orientation-switch;
+        mode-switch;
+
         port {
-            usb_phy_typec_mux_in: endpoint {
-                remote-endpoint = <&pmic_typec_mux_out>;
+            usb_mux_sbu: endpoint {
+                remote-endpoint = <&pmic_typec_sbu>;
             };
         };
     };

diff --git a/Bindings/usb/realtek,rts5411.yaml b/Bindings/usb/realtek,rts5411.yaml
index 0874fc2..6577a61 100644
--- a/Bindings/usb/realtek,rts5411.yaml
+++ b/Bindings/usb/realtek,rts5411.yaml

@@ -65,6 +65,7 @@
     description: The hard wired USB devices
     type: object
     $ref: /schemas/usb/usb-device.yaml
+    additionalProperties: true
 
 required:
   - peer-hub

diff --git a/Bindings/usb/renesas,usbhs.yaml b/Bindings/usb/renesas,usbhs.yaml
index 40ada78..c63db3e 100644
--- a/Bindings/usb/renesas,usbhs.yaml
+++ b/Bindings/usb/renesas,usbhs.yaml

@@ -19,10 +19,14 @@
       - items:
           - enum:
               - renesas,usbhs-r7s9210   # RZ/A2
+          - const: renesas,rza2-usbhs
+
+      - items:
+          - enum:
               - renesas,usbhs-r9a07g043 # RZ/G2UL and RZ/Five
               - renesas,usbhs-r9a07g044 # RZ/G2{L,LC}
               - renesas,usbhs-r9a07g054 # RZ/V2L
-          - const: renesas,rza2-usbhs
+          - const: renesas,rzg2l-usbhs
 
       - items:
           - enum:

diff --git a/Bindings/usb/samsung,exynos-dwc3.yaml b/Bindings/usb/samsung,exynos-dwc3.yaml
index 1ade99e..2b3430c 100644
--- a/Bindings/usb/samsung,exynos-dwc3.yaml
+++ b/Bindings/usb/samsung,exynos-dwc3.yaml

@@ -12,6 +12,7 @@
 properties:
   compatible:
     enum:
+      - google,gs101-dwusb3
       - samsung,exynos5250-dwusb3
       - samsung,exynos5433-dwusb3
       - samsung,exynos7-dwusb3
@@ -59,6 +60,23 @@
       properties:
         compatible:
           contains:
+            const: google,gs101-dwusb3
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: bus_early
+            - const: susp_clk
+            - const: link_aclk
+            - const: link_pclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
             const: samsung,exynos5250-dwusb3
     then:
       properties:

diff --git a/Bindings/usb/snps,dwc3.yaml b/Bindings/usb/snps,dwc3.yaml
index 203a1eb..1cd0ca9 100644
--- a/Bindings/usb/snps,dwc3.yaml
+++ b/Bindings/usb/snps,dwc3.yaml

@@ -85,15 +85,16 @@
 
   phys:
     minItems: 1
-    maxItems: 2
+    maxItems: 19
 
   phy-names:
     minItems: 1
-    maxItems: 2
-    items:
-      enum:
-        - usb2-phy
-        - usb3-phy
+    maxItems: 19
+    oneOf:
+      - items:
+          enum: [ usb2-phy, usb3-phy ]
+      - items:
+          pattern: "^usb(2-([0-9]|1[0-4])|3-[0-3])$"
 
   power-domains:
     description:

diff --git a/Bindings/usb/usb-uhci.txt b/Bindings/usb/usb-uhci.txt
deleted file mode 100644
index d1702eb..0000000
--- a/Bindings/usb/usb-uhci.txt
+++ /dev/null

@@ -1,18 +0,0 @@
-Generic Platform UHCI Controller
------------------------------------------------------
-
-Required properties:
-- compatible : "generic-uhci" (deprecated: "platform-uhci")
-- reg : Should contain 1 register ranges(address and length)
-- interrupts : UHCI controller interrupt
-
-additionally the properties from usb-hcd.yaml (in the current directory) are
-supported.
-
-Example:
-
-	uhci@d8007b00 {
-		compatible = "generic-uhci";
-		reg = <0xd8007b00 0x200>;
-		interrupts = <43>;
-	};

diff --git a/Bindings/usb/usb-uhci.yaml b/Bindings/usb/usb-uhci.yaml
new file mode 100644
index 0000000..d8336f7
--- /dev/null
+++ b/Bindings/usb/usb-uhci.yaml

@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb-uhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Platform UHCI Controller
+
+maintainers:
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: generic-uhci
+      - const: platform-uhci
+        deprecated: true
+      - items:
+          - enum:
+              - aspeed,ast2400-uhci
+              - aspeed,ast2500-uhci
+              - aspeed,ast2600-uhci
+          - const: generic-uhci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#ports':
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: usb-hcd.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: generic-uhci
+    then:
+      required:
+        - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+
+    usb@d8007b00 {
+        compatible = "generic-uhci";
+        reg = <0xd8007b00 0x200>;
+        interrupts = <43>;
+        clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+    };
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+
+    usb@1e6b0000 {
+        compatible = "aspeed,ast2500-uhci", "generic-uhci";
+        reg = <0x1e6b0000 0x100>;
+        interrupts = <14>;
+        #ports = <2>;
+        clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+    };
+...

diff --git a/Bindings/vendor-prefixes.yaml b/Bindings/vendor-prefixes.yaml
index b97d298..fbf47f0 100644
--- a/Bindings/vendor-prefixes.yaml
+++ b/Bindings/vendor-prefixes.yaml

@@ -151,6 +151,8 @@
     description: ARM Ltd.
   "^armadeus,.*":
     description: ARMadeus Systems SARL
+  "^armsom,.*":
+    description: ArmSoM Technology Co., Ltd.
   "^arrow,.*":
     description: Arrow Electronics
   "^artesyn,.*":
@@ -256,6 +258,8 @@
     description: Catalyst Semiconductor, Inc.
   "^cavium,.*":
     description: Cavium, Inc.
+  "^cct,.*":
+    description: Crystal Clear Technology Sdn. Bhd.
   "^cdns,.*":
     description: Cadence Design Systems Inc.
   "^cdtech,.*":
@@ -438,6 +442,8 @@
     description: Dongguan EmbedFire Electronic Technology Co., Ltd.
   "^embest,.*":
     description: Shenzhen Embest Technology Co., Ltd.
+  "^emcraft,.*":
+    description: Emcraft Systems
   "^emlid,.*":
     description: Emlid, Ltd.
   "^emmicro,.*":
@@ -529,6 +535,8 @@
     description: FX Technology Ltd.
   "^galaxycore,.*":
     description: GalaxyCore Inc.
+  "^gameforce,.*":
+    description: GameForce
   "^gardena,.*":
     description: GARDENA GmbH
   "^gateway,.*":
@@ -1627,6 +1635,8 @@
     description: Wondermedia Technologies, Inc.
   "^wobo,.*":
     description: Wobo
+  "^wolfvision,.*":
+    description: WolfVision GmbH
   "^x-powers,.*":
     description: X-Powers
   "^xen,.*":

diff --git a/Bindings/watchdog/aspeed,ast2400-wdt.yaml b/Bindings/watchdog/aspeed,ast2400-wdt.yaml
new file mode 100644
index 0000000..be78a98
--- /dev/null
+++ b/Bindings/watchdog/aspeed,ast2400-wdt.yaml

@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/aspeed,ast2400-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed watchdog timer controllers
+
+maintainers:
+  - Andrew Jeffery <andrew@codeconstruct.com.au>
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-wdt
+      - aspeed,ast2500-wdt
+      - aspeed,ast2600-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: >
+      The clock used to drive the watchdog counter. From the AST2500 no source
+      other than the 1MHz clock can be selected, so the clocks property is
+      optional.
+
+  aspeed,reset-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - cpu
+      - soc
+      - system
+      - none
+    default: system
+    description: >
+      The watchdog can be programmed to generate one of three different types of
+      reset when a timeout occcurs.
+
+      Specifying 'cpu' will only reset the processor on a timeout event.
+
+      Specifying 'soc' will reset a configurable subset of the SoC's controllers
+      on a timeout event. Controllers critical to the SoC's operation may remain
+      untouched. The set of SoC controllers to reset may be specified via the
+      aspeed,reset-mask property if the node has the aspeed,ast2500-wdt or
+      aspeed,ast2600-wdt compatible.
+
+      Specifying 'system' will reset all controllers on a timeout event, as if
+      EXTRST had been asserted.
+
+      Specifying 'none' will cause the timeout event to have no reset effect.
+      Another watchdog engine on the chip must be used for chip reset operations.
+
+  aspeed,alt-boot:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: >
+      Direct the watchdog to configure the SoC to boot from the alternative boot
+      region if a timeout occurs.
+
+  aspeed,external-signal:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: >
+      Assert the timeout event on an external signal pin associated with the
+      watchdog controller instance. The pin must be muxed appropriately.
+
+  aspeed,ext-pulse-duration:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      The duration, in microseconds, of the pulse emitted on the external signal
+      pin.
+
+  aspeed,ext-push-pull:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: >
+      If aspeed,external-signal is specified in the node, set the external
+      signal pin's drive type to push-pull. If aspeed,ext-push-pull is not
+      specified then the pin is configured as open-drain.
+
+  aspeed,ext-active-high:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: >
+      If both aspeed,external-signal and aspeed,ext-push-pull are specified in
+      the node, set the pulse polarity to active-high. If aspeed,ext-active-high
+      is not specified then the pin is configured as active-low.
+
+  aspeed,reset-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+    description: >
+      A bitmask indicating which peripherals will be reset if the watchdog
+      timer expires. On AST2500 SoCs this should be a single word defined using
+      the AST2500_WDT_RESET_* macros; on AST2600 SoCs this should be a two-word
+      array with the first word defined using the AST2600_WDT_RESET1_* macros,
+      and the second word defined using the AST2600_WDT_RESET2_* macros.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      anyOf:
+        - required:
+            - aspeed,ext-push-pull
+        - required:
+            - aspeed,ext-active-high
+        - required:
+            - aspeed,reset-mask
+    then:
+      properties:
+        compatible:
+          enum:
+            - aspeed,ast2500-wdt
+            - aspeed,ast2600-wdt
+  - if:
+      required:
+        - aspeed,ext-active-high
+    then:
+      required:
+        - aspeed,ext-push-pull
+
+additionalProperties: false
+
+examples:
+  - |
+    watchdog@1e785000 {
+        compatible = "aspeed,ast2400-wdt";
+        reg = <0x1e785000 0x1c>;
+        aspeed,reset-type = "system";
+        aspeed,external-signal;
+    };
+  - |
+    #include <dt-bindings/watchdog/aspeed-wdt.h>
+    watchdog@1e785040 {
+        compatible = "aspeed,ast2600-wdt";
+        reg = <0x1e785040 0x40>;
+        aspeed,reset-type = "soc";
+        aspeed,reset-mask = <AST2600_WDT_RESET1_DEFAULT
+                            (AST2600_WDT_RESET2_DEFAULT & ~AST2600_WDT_RESET2_LPC)>;
+    };

diff --git a/Bindings/watchdog/aspeed-wdt.txt b/Bindings/watchdog/aspeed-wdt.txt
deleted file mode 100644
index 3208adb..0000000
--- a/Bindings/watchdog/aspeed-wdt.txt
+++ /dev/null

@@ -1,73 +0,0 @@
-Aspeed Watchdog Timer
-
-Required properties:
- - compatible: must be one of:
-	- "aspeed,ast2400-wdt"
-	- "aspeed,ast2500-wdt"
-	- "aspeed,ast2600-wdt"
-
- - reg: physical base address of the controller and length of memory mapped
-   region
-
-Optional properties:
-
- - aspeed,reset-type = "cpu|soc|system|none"
-
-   Reset behavior - Whenever a timeout occurs the watchdog can be programmed
-   to generate one of three different, mutually exclusive, types of resets.
-
-   Type "none" can be specified to indicate that no resets are to be done.
-   This is useful in situations where another watchdog engine on chip is
-   to perform the reset.
-
-   If 'aspeed,reset-type=' is not specified the default is to enable system
-   reset.
-
-   Reset types:
-
-        - cpu: Reset CPU on watchdog timeout
-
-        - soc: Reset 'System on Chip' on watchdog timeout
-
-        - system: Reset system on watchdog timeout
-
-        - none: No reset is performed on timeout. Assumes another watchdog
-                engine is responsible for this.
-
- - aspeed,alt-boot:    If property is present then boot from alternate block.
- - aspeed,external-signal: If property is present then signal is sent to
-			external reset counter (only WDT1 and WDT2). If not
-			specified no external signal is sent.
- - aspeed,ext-pulse-duration: External signal pulse duration in microseconds
-
-Optional properties for AST2500-compatible watchdogs:
- - aspeed,ext-push-pull: If aspeed,external-signal is present, set the pin's
-			 drive type to push-pull. The default is open-drain.
- - aspeed,ext-active-high: If aspeed,external-signal is present and and the pin
-			   is configured as push-pull, then set the pulse
-			   polarity to active-high. The default is active-low.
-
-Optional properties for AST2500- and AST2600-compatible watchdogs:
- - aspeed,reset-mask: A bitmask indicating which peripherals will be reset if
-		      the watchdog timer expires.  On AST2500 this should be a
-		      single word defined using the AST2500_WDT_RESET_* macros;
-		      on AST2600 this should be a two-word array with the first
-		      word defined using the AST2600_WDT_RESET1_* macros and the
-		      second word defined using the AST2600_WDT_RESET2_* macros.
-
-Examples:
-
-	wdt1: watchdog@1e785000 {
-		compatible = "aspeed,ast2400-wdt";
-		reg = <0x1e785000 0x1c>;
-		aspeed,reset-type = "system";
-		aspeed,external-signal;
-	};
-
-	#include <dt-bindings/watchdog/aspeed-wdt.h>
-	wdt2: watchdog@1e785040 {
-		compatible = "aspeed,ast2600-wdt";
-		reg = <0x1e785040 0x40>;
-		aspeed,reset-mask = <AST2600_WDT_RESET1_DEFAULT
-				     (AST2600_WDT_RESET2_DEFAULT & ~AST2600_WDT_RESET2_LPC)>;
-	};

diff --git a/Bindings/watchdog/twl4030-wdt.txt b/Bindings/watchdog/twl4030-wdt.txt
deleted file mode 100644
index 80a3719..0000000
--- a/Bindings/watchdog/twl4030-wdt.txt
+++ /dev/null

@@ -1,10 +0,0 @@
-Device tree bindings for twl4030-wdt driver (TWL4030 watchdog)
-
-Required properties:
-	compatible = "ti,twl4030-wdt";
-
-Example:
-
-watchdog {
-	compatible = "ti,twl4030-wdt";
-};

diff --git a/include/dt-bindings/arm/mhuv3-dt.h b/include/dt-bindings/arm/mhuv3-dt.h
new file mode 100644
index 0000000..4575406
--- /dev/null
+++ b/include/dt-bindings/arm/mhuv3-dt.h

@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * This header provides constants for the defined MHUv3 types.
+ */
+
+#ifndef _DT_BINDINGS_ARM_MHUV3_DT_H
+#define _DT_BINDINGS_ARM_MHUV3_DT_H
+
+#define DBE_EXT		0
+#define FCE_EXT		1
+#define FE_EXT		2
+
+#endif /* _DT_BINDINGS_ARM_MHUV3_DT_H */

diff --git a/include/dt-bindings/arm/qcom,ids.h b/include/dt-bindings/arm/qcom,ids.h
index 19ac7b3..d040033 100644
--- a/include/dt-bindings/arm/qcom,ids.h
+++ b/include/dt-bindings/arm/qcom,ids.h

@@ -258,6 +258,7 @@
 #define QCOM_ID_QRU1000			539
 #define QCOM_ID_SM8475_2		540
 #define QCOM_ID_QDU1000			545
+#define QCOM_ID_X1E80100		555
 #define QCOM_ID_SM8650			557
 #define QCOM_ID_SM4450			568
 #define QCOM_ID_QDU1010			587

diff --git a/include/dt-bindings/clock/google,gs101.h b/include/dt-bindings/clock/google,gs101.h
index 3dac357..442f9e9 100644
--- a/include/dt-bindings/clock/google,gs101.h
+++ b/include/dt-bindings/clock/google,gs101.h

@@ -313,6 +313,122 @@
 #define CLK_APM_PLL_DIV4_APM				70
 #define CLK_APM_PLL_DIV16_APM				71
 
+/* CMU_HSI0 */
+#define CLK_FOUT_USB_PLL					1
+#define CLK_MOUT_PLL_USB					2
+#define CLK_MOUT_HSI0_ALT_USER					3
+#define CLK_MOUT_HSI0_BUS_USER					4
+#define CLK_MOUT_HSI0_DPGTC_USER				5
+#define CLK_MOUT_HSI0_TCXO_USER					6
+#define CLK_MOUT_HSI0_USB20_USER				7
+#define CLK_MOUT_HSI0_USB31DRD_USER				8
+#define CLK_MOUT_HSI0_USBDPDBG_USER				9
+#define CLK_MOUT_HSI0_BUS					10
+#define CLK_MOUT_HSI0_USB20_REF					11
+#define CLK_MOUT_HSI0_USB31DRD					12
+#define CLK_DOUT_HSI0_USB31DRD					13
+#define CLK_GOUT_HSI0_PCLK					14
+#define CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_SUSPEND_CLK_26	15
+#define CLK_GOUT_HSI0_CLK_HSI0_ALT				16
+#define CLK_GOUT_HSI0_DP_LINK_I_DP_GTC_CLK			17
+#define CLK_GOUT_HSI0_DP_LINK_I_PCLK				18
+#define CLK_GOUT_HSI0_D_TZPC_HSI0_PCLK				19
+#define CLK_GOUT_HSI0_ETR_MIU_I_ACLK				20
+#define CLK_GOUT_HSI0_ETR_MIU_I_PCLK				21
+#define CLK_GOUT_HSI0_GPC_HSI0_PCLK				22
+#define CLK_GOUT_HSI0_LHM_AXI_G_ETR_HSI0_I_CLK			23
+#define CLK_GOUT_HSI0_LHM_AXI_P_AOCHSI0_I_CLK			24
+#define CLK_GOUT_HSI0_LHM_AXI_P_HSI0_I_CLK			25
+#define CLK_GOUT_HSI0_LHS_ACEL_D_HSI0_I_CLK			26
+#define CLK_GOUT_HSI0_LHS_AXI_D_HSI0AOC_I_CLK			27
+#define CLK_GOUT_HSI0_PPMU_HSI0_AOC_ACLK			28
+#define CLK_GOUT_HSI0_PPMU_HSI0_AOC_PCLK			29
+#define CLK_GOUT_HSI0_PPMU_HSI0_BUS0_ACLK			30
+#define CLK_GOUT_HSI0_PPMU_HSI0_BUS0_PCLK			31
+#define CLK_GOUT_HSI0_CLK_HSI0_BUS_CLK				32
+#define CLK_GOUT_HSI0_SSMT_USB_ACLK				33
+#define CLK_GOUT_HSI0_SSMT_USB_PCLK				34
+#define CLK_GOUT_HSI0_SYSMMU_USB_CLK_S2				35
+#define CLK_GOUT_HSI0_SYSREG_HSI0_PCLK				36
+#define CLK_GOUT_HSI0_UASC_HSI0_CTRL_ACLK			37
+#define CLK_GOUT_HSI0_UASC_HSI0_CTRL_PCLK			38
+#define CLK_GOUT_HSI0_UASC_HSI0_LINK_ACLK			39
+#define CLK_GOUT_HSI0_UASC_HSI0_LINK_PCLK			40
+#define CLK_GOUT_HSI0_USB31DRD_ACLK_PHYCTRL			41
+#define CLK_GOUT_HSI0_USB31DRD_BUS_CLK_EARLY			42
+#define CLK_GOUT_HSI0_USB31DRD_I_USB20_PHY_REFCLK_26		43
+#define CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_REF_CLK_40		44
+#define CLK_GOUT_HSI0_USB31DRD_I_USBDPPHY_REF_SOC_PLL		45
+#define CLK_GOUT_HSI0_USB31DRD_I_USBDPPHY_SCL_APB_PCLK		46
+#define CLK_GOUT_HSI0_USB31DRD_I_USBPCS_APB_CLK			47
+#define CLK_GOUT_HSI0_USB31DRD_USBDPPHY_I_ACLK			48
+#define CLK_GOUT_HSI0_USB31DRD_USBDPPHY_UDBG_I_APB_PCLK		49
+#define CLK_GOUT_HSI0_XIU_D0_HSI0_ACLK				50
+#define CLK_GOUT_HSI0_XIU_D1_HSI0_ACLK				51
+#define CLK_GOUT_HSI0_XIU_P_HSI0_ACLK				52
+
+/* CMU_HSI2 */
+#define CLK_MOUT_HSI2_BUS_USER						1
+#define CLK_MOUT_HSI2_MMC_CARD_USER					2
+#define CLK_MOUT_HSI2_PCIE_USER						3
+#define CLK_MOUT_HSI2_UFS_EMBD_USER					4
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_003_PHY_REFCLK_IN		5
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_004_PHY_REFCLK_IN		6
+#define CLK_GOUT_HSI2_SSMT_PCIE_IA_GEN4A_1_ACLK				7
+#define CLK_GOUT_HSI2_SSMT_PCIE_IA_GEN4A_1_PCLK				8
+#define CLK_GOUT_HSI2_SSMT_PCIE_IA_GEN4B_1_ACLK				9
+#define CLK_GOUT_HSI2_SSMT_PCIE_IA_GEN4B_1_PCLK				10
+#define CLK_GOUT_HSI2_D_TZPC_HSI2_PCLK					11
+#define CLK_GOUT_HSI2_GPC_HSI2_PCLK					12
+#define CLK_GOUT_HSI2_GPIO_HSI2_PCLK					13
+#define CLK_GOUT_HSI2_HSI2_CMU_HSI2_PCLK				14
+#define CLK_GOUT_HSI2_LHM_AXI_P_HSI2_I_CLK				15
+#define CLK_GOUT_HSI2_LHS_ACEL_D_HSI2_I_CLK				16
+#define CLK_GOUT_HSI2_MMC_CARD_I_ACLK					17
+#define CLK_GOUT_HSI2_MMC_CARD_SDCLKIN					18
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_003_DBI_ACLK_UG			19
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_003_MSTR_ACLK_UG			20
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_003_SLV_ACLK_UG			21
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_003_I_DRIVER_APB_CLK		22
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_004_DBI_ACLK_UG			23
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_004_MSTR_ACLK_UG			24
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_004_SLV_ACLK_UG			25
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_004_I_DRIVER_APB_CLK		26
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCS_PMA_PHY_UDBG_I_APB_PCLK		27
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCS_PMA_PIPE_PAL_PCIE_I_APB_PCLK	28
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCS_PMA_PCIEPHY210X2_QCH_I_APB_PCLK	29
+#define CLK_GOUT_HSI2_PCIE_IA_GEN4A_1_I_CLK				30
+#define CLK_GOUT_HSI2_PCIE_IA_GEN4B_1_I_CLK				31
+#define CLK_GOUT_HSI2_PPMU_HSI2_ACLK					32
+#define CLK_GOUT_HSI2_PPMU_HSI2_PCLK					33
+#define CLK_GOUT_HSI2_QE_MMC_CARD_HSI2_ACLK				34
+#define CLK_GOUT_HSI2_QE_MMC_CARD_HSI2_PCLK				35
+#define CLK_GOUT_HSI2_QE_PCIE_GEN4A_HSI2_ACLK				36
+#define CLK_GOUT_HSI2_QE_PCIE_GEN4A_HSI2_PCLK				37
+#define CLK_GOUT_HSI2_QE_PCIE_GEN4B_HSI2_ACLK				38
+#define CLK_GOUT_HSI2_QE_PCIE_GEN4B_HSI2_PCLK				39
+#define CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_ACLK				40
+#define CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_PCLK				41
+#define CLK_GOUT_HSI2_CLK_HSI2_BUS_CLK					42
+#define CLK_GOUT_HSI2_CLK_HSI2_OSCCLK_CLK				43
+#define CLK_GOUT_HSI2_SSMT_HSI2_ACLK					44
+#define CLK_GOUT_HSI2_SSMT_HSI2_PCLK					45
+#define CLK_GOUT_HSI2_SYSMMU_HSI2_CLK_S2				46
+#define CLK_GOUT_HSI2_SYSREG_HSI2_PCLK					47
+#define CLK_GOUT_HSI2_UASC_PCIE_GEN4A_DBI_1_ACLK			48
+#define CLK_GOUT_HSI2_UASC_PCIE_GEN4A_DBI_1_PCLK			49
+#define CLK_GOUT_HSI2_UASC_PCIE_GEN4A_SLV_1_ACLK			50
+#define CLK_GOUT_HSI2_UASC_PCIE_GEN4A_SLV_1_PCLK			51
+#define CLK_GOUT_HSI2_UASC_PCIE_GEN4B_DBI_1_ACLK			52
+#define CLK_GOUT_HSI2_UASC_PCIE_GEN4B_DBI_1_PCLK			53
+#define CLK_GOUT_HSI2_UASC_PCIE_GEN4B_SLV_1_ACLK			54
+#define CLK_GOUT_HSI2_UASC_PCIE_GEN4B_SLV_1_PCLK			55
+#define CLK_GOUT_HSI2_UFS_EMBD_I_ACLK					56
+#define CLK_GOUT_HSI2_UFS_EMBD_I_CLK_UNIPRO				57
+#define CLK_GOUT_HSI2_UFS_EMBD_I_FMP_CLK				58
+#define CLK_GOUT_HSI2_XIU_D_HSI2_ACLK					59
+#define CLK_GOUT_HSI2_XIU_P_HSI2_ACLK					60
+
 /* CMU_MISC */
 #define CLK_MOUT_MISC_BUS_USER				1
 #define CLK_MOUT_MISC_SSS_USER				2

diff --git a/include/dt-bindings/clock/loongson,ls2k-clk.h b/include/dt-bindings/clock/loongson,ls2k-clk.h
index 3bc4dfc..4279ba5 100644
--- a/include/dt-bindings/clock/loongson,ls2k-clk.h
+++ b/include/dt-bindings/clock/loongson,ls2k-clk.h

@@ -7,24 +7,40 @@
 #ifndef __DT_BINDINGS_CLOCK_LOONGSON2_H
 #define __DT_BINDINGS_CLOCK_LOONGSON2_H
 
-#define LOONGSON2_REF_100M				0
-#define LOONGSON2_NODE_PLL				1
-#define LOONGSON2_DDR_PLL				2
-#define LOONGSON2_DC_PLL				3
-#define LOONGSON2_PIX0_PLL				4
-#define LOONGSON2_PIX1_PLL				5
-#define LOONGSON2_NODE_CLK				6
-#define LOONGSON2_HDA_CLK				7
-#define LOONGSON2_GPU_CLK				8
-#define LOONGSON2_DDR_CLK				9
-#define LOONGSON2_GMAC_CLK				10
-#define LOONGSON2_DC_CLK				11
-#define LOONGSON2_APB_CLK				12
-#define LOONGSON2_USB_CLK				13
-#define LOONGSON2_SATA_CLK				14
-#define LOONGSON2_PIX0_CLK				15
-#define LOONGSON2_PIX1_CLK				16
-#define LOONGSON2_BOOT_CLK				17
-#define LOONGSON2_CLK_END				18
+#define LOONGSON2_REF_100M	0
+#define LOONGSON2_NODE_PLL	1
+#define LOONGSON2_DDR_PLL	2
+#define LOONGSON2_DC_PLL	3
+#define LOONGSON2_PIX0_PLL	4
+#define LOONGSON2_PIX1_PLL	5
+#define LOONGSON2_NODE_CLK	6
+#define LOONGSON2_HDA_CLK	7
+#define LOONGSON2_GPU_CLK	8
+#define LOONGSON2_DDR_CLK	9
+#define LOONGSON2_GMAC_CLK	10
+#define LOONGSON2_DC_CLK	11
+#define LOONGSON2_APB_CLK	12
+#define LOONGSON2_USB_CLK	13
+#define LOONGSON2_SATA_CLK	14
+#define LOONGSON2_PIX0_CLK	15
+#define LOONGSON2_PIX1_CLK	16
+#define LOONGSON2_BOOT_CLK	17
+#define LOONGSON2_OUT0_GATE	18
+#define LOONGSON2_GMAC_GATE	19
+#define LOONGSON2_RIO_GATE	20
+#define LOONGSON2_DC_GATE	21
+#define LOONGSON2_GPU_GATE	22
+#define LOONGSON2_DDR_GATE	23
+#define LOONGSON2_HDA_GATE	24
+#define LOONGSON2_NODE_GATE	25
+#define LOONGSON2_EMMC_GATE	26
+#define LOONGSON2_PIX0_GATE	27
+#define LOONGSON2_PIX1_GATE	28
+#define LOONGSON2_OUT0_CLK	29
+#define LOONGSON2_RIO_CLK	30
+#define LOONGSON2_EMMC_CLK	31
+#define LOONGSON2_DES_CLK	32
+#define LOONGSON2_I2S_CLK	33
+#define LOONGSON2_MISC_CLK	34
 
 #endif

diff --git a/include/dt-bindings/clock/nxp,imx95-clock.h b/include/dt-bindings/clock/nxp,imx95-clock.h
new file mode 100644
index 0000000..782662c
--- /dev/null
+++ b/include/dt-bindings/clock/nxp,imx95-clock.h

@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
+/*
+ * Copyright 2024 NXP
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX95_H
+#define __DT_BINDINGS_CLOCK_IMX95_H
+
+#define IMX95_CLK_VPUBLK_WAVE			0
+#define IMX95_CLK_VPUBLK_JPEG_ENC		1
+#define IMX95_CLK_VPUBLK_JPEG_DEC		2
+
+#define IMX95_CLK_CAMBLK_CSI2_FOR0		0
+#define IMX95_CLK_CAMBLK_CSI2_FOR1		1
+#define IMX95_CLK_CAMBLK_ISP_AXI		2
+#define IMX95_CLK_CAMBLK_ISP_PIXEL		3
+#define IMX95_CLK_CAMBLK_ISP			4
+
+#define IMX95_CLK_DISPMIX_LVDS_PHY_DIV		0
+#define IMX95_CLK_DISPMIX_LVDS_CH0_GATE		1
+#define IMX95_CLK_DISPMIX_LVDS_CH1_GATE		2
+#define IMX95_CLK_DISPMIX_PIX_DI0_GATE		3
+#define IMX95_CLK_DISPMIX_PIX_DI1_GATE		4
+
+#define IMX95_CLK_DISPMIX_ENG0_SEL		0
+#define IMX95_CLK_DISPMIX_ENG1_SEL		1
+
+#endif	/* __DT_BINDINGS_CLOCK_IMX95_H */

diff --git a/include/dt-bindings/clock/r8a73a4-clock.h b/include/dt-bindings/clock/r8a73a4-clock.h
index 1ec4827..655440a 100644
--- a/include/dt-bindings/clock/r8a73a4-clock.h
+++ b/include/dt-bindings/clock/r8a73a4-clock.h

@@ -24,6 +24,10 @@
 #define R8A73A4_CLK_ZS		14
 #define R8A73A4_CLK_HP		15
 
+/* MSTP1 */
+#define R8A73A4_CLK_TMU0	25
+#define R8A73A4_CLK_TMU3	21
+
 /* MSTP2 */
 #define R8A73A4_CLK_DMAC	18
 #define R8A73A4_CLK_SCIFB3	17

diff --git a/include/dt-bindings/clock/r9a07g043-cpg.h b/include/dt-bindings/clock/r9a07g043-cpg.h
index 77cde8e..1319933 100644
--- a/include/dt-bindings/clock/r9a07g043-cpg.h
+++ b/include/dt-bindings/clock/r9a07g043-cpg.h

@@ -16,15 +16,15 @@
 #define R9A07G043_CLK_SD0		5
 #define R9A07G043_CLK_SD1		6
 #define R9A07G043_CLK_M0		7
-#define R9A07G043_CLK_M2		8
-#define R9A07G043_CLK_M3		9
+#define R9A07G043_CLK_M2		8	/* RZ/G2UL Only */
+#define R9A07G043_CLK_M3		9	/* RZ/G2UL Only */
 #define R9A07G043_CLK_HP		10
 #define R9A07G043_CLK_TSU		11
 #define R9A07G043_CLK_ZT		12
 #define R9A07G043_CLK_P0		13
 #define R9A07G043_CLK_P1		14
 #define R9A07G043_CLK_P2		15
-#define R9A07G043_CLK_AT		16
+#define R9A07G043_CLK_AT		16	/* RZ/G2UL Only */
 #define R9A07G043_OSCCLK		17
 #define R9A07G043_CLK_P0_DIV2		18
 
@@ -200,5 +200,57 @@
 #define R9A07G043_AX45MP_CORE0_RESETN	78	/* RZ/Five Only */
 #define R9A07G043_IAX45_RESETN		79	/* RZ/Five Only */
 
+/* Power domain IDs. */
+#define R9A07G043_PD_ALWAYS_ON		0
+#define R9A07G043_PD_GIC		1	/* RZ/G2UL Only */
+#define R9A07G043_PD_IA55		2	/* RZ/G2UL Only */
+#define R9A07G043_PD_MHU		3	/* RZ/G2UL Only */
+#define R9A07G043_PD_CORESIGHT		4	/* RZ/G2UL Only */
+#define R9A07G043_PD_SYC		5	/* RZ/G2UL Only */
+#define R9A07G043_PD_DMAC		6
+#define R9A07G043_PD_GTM0		7
+#define R9A07G043_PD_GTM1		8
+#define R9A07G043_PD_GTM2		9
+#define R9A07G043_PD_MTU		10
+#define R9A07G043_PD_POE3		11
+#define R9A07G043_PD_WDT0		12
+#define R9A07G043_PD_SPI		13
+#define R9A07G043_PD_SDHI0		14
+#define R9A07G043_PD_SDHI1		15
+#define R9A07G043_PD_ISU		16	/* RZ/G2UL Only */
+#define R9A07G043_PD_CRU		17	/* RZ/G2UL Only */
+#define R9A07G043_PD_LCDC		18	/* RZ/G2UL Only */
+#define R9A07G043_PD_SSI0		19
+#define R9A07G043_PD_SSI1		20
+#define R9A07G043_PD_SSI2		21
+#define R9A07G043_PD_SSI3		22
+#define R9A07G043_PD_SRC		23
+#define R9A07G043_PD_USB0		24
+#define R9A07G043_PD_USB1		25
+#define R9A07G043_PD_USB_PHY		26
+#define R9A07G043_PD_ETHER0		27
+#define R9A07G043_PD_ETHER1		28
+#define R9A07G043_PD_I2C0		29
+#define R9A07G043_PD_I2C1		30
+#define R9A07G043_PD_I2C2		31
+#define R9A07G043_PD_I2C3		32
+#define R9A07G043_PD_SCIF0		33
+#define R9A07G043_PD_SCIF1		34
+#define R9A07G043_PD_SCIF2		35
+#define R9A07G043_PD_SCIF3		36
+#define R9A07G043_PD_SCIF4		37
+#define R9A07G043_PD_SCI0		38
+#define R9A07G043_PD_SCI1		39
+#define R9A07G043_PD_IRDA		40
+#define R9A07G043_PD_RSPI0		41
+#define R9A07G043_PD_RSPI1		42
+#define R9A07G043_PD_RSPI2		43
+#define R9A07G043_PD_CANFD		44
+#define R9A07G043_PD_ADC		45
+#define R9A07G043_PD_TSU		46
+#define R9A07G043_PD_PLIC		47	/* RZ/Five Only */
+#define R9A07G043_PD_IAX45		48	/* RZ/Five Only */
+#define R9A07G043_PD_NCEPLDM		49	/* RZ/Five Only */
+#define R9A07G043_PD_NCEPLMT		50	/* RZ/Five Only */
 
 #endif /* __DT_BINDINGS_CLOCK_R9A07G043_CPG_H__ */

diff --git a/include/dt-bindings/clock/r9a07g044-cpg.h b/include/dt-bindings/clock/r9a07g044-cpg.h
index 0bb17ff..e209f96 100644
--- a/include/dt-bindings/clock/r9a07g044-cpg.h
+++ b/include/dt-bindings/clock/r9a07g044-cpg.h

@@ -217,4 +217,62 @@
 #define R9A07G044_ADC_ADRST_N		82
 #define R9A07G044_TSU_PRESETN		83
 
+/* Power domain IDs. */
+#define R9A07G044_PD_ALWAYS_ON		0
+#define R9A07G044_PD_GIC		1
+#define R9A07G044_PD_IA55		2
+#define R9A07G044_PD_MHU		3
+#define R9A07G044_PD_CORESIGHT		4
+#define R9A07G044_PD_SYC		5
+#define R9A07G044_PD_DMAC		6
+#define R9A07G044_PD_GTM0		7
+#define R9A07G044_PD_GTM1		8
+#define R9A07G044_PD_GTM2		9
+#define R9A07G044_PD_MTU		10
+#define R9A07G044_PD_POE3		11
+#define R9A07G044_PD_GPT		12
+#define R9A07G044_PD_POEGA		13
+#define R9A07G044_PD_POEGB		14
+#define R9A07G044_PD_POEGC		15
+#define R9A07G044_PD_POEGD		16
+#define R9A07G044_PD_WDT0		17
+#define R9A07G044_PD_WDT1		18
+#define R9A07G044_PD_SPI		19
+#define R9A07G044_PD_SDHI0		20
+#define R9A07G044_PD_SDHI1		21
+#define R9A07G044_PD_3DGE		22
+#define R9A07G044_PD_ISU		23
+#define R9A07G044_PD_VCPL4		24
+#define R9A07G044_PD_CRU		25
+#define R9A07G044_PD_MIPI_DSI		26
+#define R9A07G044_PD_LCDC		27
+#define R9A07G044_PD_SSI0		28
+#define R9A07G044_PD_SSI1		29
+#define R9A07G044_PD_SSI2		30
+#define R9A07G044_PD_SSI3		31
+#define R9A07G044_PD_SRC		32
+#define R9A07G044_PD_USB0		33
+#define R9A07G044_PD_USB1		34
+#define R9A07G044_PD_USB_PHY		35
+#define R9A07G044_PD_ETHER0		36
+#define R9A07G044_PD_ETHER1		37
+#define R9A07G044_PD_I2C0		38
+#define R9A07G044_PD_I2C1		39
+#define R9A07G044_PD_I2C2		40
+#define R9A07G044_PD_I2C3		41
+#define R9A07G044_PD_SCIF0		42
+#define R9A07G044_PD_SCIF1		43
+#define R9A07G044_PD_SCIF2		44
+#define R9A07G044_PD_SCIF3		45
+#define R9A07G044_PD_SCIF4		46
+#define R9A07G044_PD_SCI0		47
+#define R9A07G044_PD_SCI1		48
+#define R9A07G044_PD_IRDA		49
+#define R9A07G044_PD_RSPI0		50
+#define R9A07G044_PD_RSPI1		51
+#define R9A07G044_PD_RSPI2		52
+#define R9A07G044_PD_CANFD		53
+#define R9A07G044_PD_ADC		54
+#define R9A07G044_PD_TSU		55
+
 #endif /* __DT_BINDINGS_CLOCK_R9A07G044_CPG_H__ */

diff --git a/include/dt-bindings/clock/r9a07g054-cpg.h b/include/dt-bindings/clock/r9a07g054-cpg.h
index 43f4dbd..2c99f89 100644
--- a/include/dt-bindings/clock/r9a07g054-cpg.h
+++ b/include/dt-bindings/clock/r9a07g054-cpg.h

@@ -226,4 +226,62 @@
 #define R9A07G054_TSU_PRESETN		83
 #define R9A07G054_STPAI_ARESETN		84
 
+/* Power domain IDs. */
+#define R9A07G054_PD_ALWAYS_ON		0
+#define R9A07G054_PD_GIC		1
+#define R9A07G054_PD_IA55		2
+#define R9A07G054_PD_MHU		3
+#define R9A07G054_PD_CORESIGHT		4
+#define R9A07G054_PD_SYC		5
+#define R9A07G054_PD_DMAC		6
+#define R9A07G054_PD_GTM0		7
+#define R9A07G054_PD_GTM1		8
+#define R9A07G054_PD_GTM2		9
+#define R9A07G054_PD_MTU		10
+#define R9A07G054_PD_POE3		11
+#define R9A07G054_PD_GPT		12
+#define R9A07G054_PD_POEGA		13
+#define R9A07G054_PD_POEGB		14
+#define R9A07G054_PD_POEGC		15
+#define R9A07G054_PD_POEGD		16
+#define R9A07G054_PD_WDT0		17
+#define R9A07G054_PD_WDT1		18
+#define R9A07G054_PD_SPI		19
+#define R9A07G054_PD_SDHI0		20
+#define R9A07G054_PD_SDHI1		21
+#define R9A07G054_PD_3DGE		22
+#define R9A07G054_PD_ISU		23
+#define R9A07G054_PD_VCPL4		24
+#define R9A07G054_PD_CRU		25
+#define R9A07G054_PD_MIPI_DSI		26
+#define R9A07G054_PD_LCDC		27
+#define R9A07G054_PD_SSI0		28
+#define R9A07G054_PD_SSI1		29
+#define R9A07G054_PD_SSI2		30
+#define R9A07G054_PD_SSI3		31
+#define R9A07G054_PD_SRC		32
+#define R9A07G054_PD_USB0		33
+#define R9A07G054_PD_USB1		34
+#define R9A07G054_PD_USB_PHY		35
+#define R9A07G054_PD_ETHER0		36
+#define R9A07G054_PD_ETHER1		37
+#define R9A07G054_PD_I2C0		38
+#define R9A07G054_PD_I2C1		39
+#define R9A07G054_PD_I2C2		40
+#define R9A07G054_PD_I2C3		41
+#define R9A07G054_PD_SCIF0		42
+#define R9A07G054_PD_SCIF1		43
+#define R9A07G054_PD_SCIF2		44
+#define R9A07G054_PD_SCIF3		45
+#define R9A07G054_PD_SCIF4		46
+#define R9A07G054_PD_SCI0		47
+#define R9A07G054_PD_SCI1		48
+#define R9A07G054_PD_IRDA		49
+#define R9A07G054_PD_RSPI0		50
+#define R9A07G054_PD_RSPI1		51
+#define R9A07G054_PD_RSPI2		52
+#define R9A07G054_PD_CANFD		53
+#define R9A07G054_PD_ADC		54
+#define R9A07G054_PD_TSU		55
+
 #endif /* __DT_BINDINGS_CLOCK_R9A07G054_CPG_H__ */

diff --git a/include/dt-bindings/clock/r9a08g045-cpg.h b/include/dt-bindings/clock/r9a08g045-cpg.h
index 410725b..8281e9c 100644
--- a/include/dt-bindings/clock/r9a08g045-cpg.h
+++ b/include/dt-bindings/clock/r9a08g045-cpg.h

@@ -239,4 +239,74 @@
 #define R9A08G045_I3C_PRESETN		92
 #define R9A08G045_VBAT_BRESETN		93
 
+/* Power domain IDs. */
+#define R9A08G045_PD_ALWAYS_ON		0
+#define R9A08G045_PD_GIC		1
+#define R9A08G045_PD_IA55		2
+#define R9A08G045_PD_MHU		3
+#define R9A08G045_PD_CORESIGHT		4
+#define R9A08G045_PD_SYC		5
+#define R9A08G045_PD_DMAC		6
+#define R9A08G045_PD_GTM0		7
+#define R9A08G045_PD_GTM1		8
+#define R9A08G045_PD_GTM2		9
+#define R9A08G045_PD_GTM3		10
+#define R9A08G045_PD_GTM4		11
+#define R9A08G045_PD_GTM5		12
+#define R9A08G045_PD_GTM6		13
+#define R9A08G045_PD_GTM7		14
+#define R9A08G045_PD_MTU		15
+#define R9A08G045_PD_POE3		16
+#define R9A08G045_PD_GPT		17
+#define R9A08G045_PD_POEGA		18
+#define R9A08G045_PD_POEGB		19
+#define R9A08G045_PD_POEGC		20
+#define R9A08G045_PD_POEGD		21
+#define R9A08G045_PD_WDT0		22
+#define R9A08G045_PD_XSPI		23
+#define R9A08G045_PD_SDHI0		24
+#define R9A08G045_PD_SDHI1		25
+#define R9A08G045_PD_SDHI2		26
+#define R9A08G045_PD_SSI0		27
+#define R9A08G045_PD_SSI1		28
+#define R9A08G045_PD_SSI2		29
+#define R9A08G045_PD_SSI3		30
+#define R9A08G045_PD_SRC		31
+#define R9A08G045_PD_USB0		32
+#define R9A08G045_PD_USB1		33
+#define R9A08G045_PD_USB_PHY		34
+#define R9A08G045_PD_ETHER0		35
+#define R9A08G045_PD_ETHER1		36
+#define R9A08G045_PD_I2C0		37
+#define R9A08G045_PD_I2C1		38
+#define R9A08G045_PD_I2C2		39
+#define R9A08G045_PD_I2C3		40
+#define R9A08G045_PD_SCIF0		41
+#define R9A08G045_PD_SCIF1		42
+#define R9A08G045_PD_SCIF2		43
+#define R9A08G045_PD_SCIF3		44
+#define R9A08G045_PD_SCIF4		45
+#define R9A08G045_PD_SCIF5		46
+#define R9A08G045_PD_SCI0		47
+#define R9A08G045_PD_SCI1		48
+#define R9A08G045_PD_IRDA		49
+#define R9A08G045_PD_RSPI0		50
+#define R9A08G045_PD_RSPI1		51
+#define R9A08G045_PD_RSPI2		52
+#define R9A08G045_PD_RSPI3		53
+#define R9A08G045_PD_RSPI4		54
+#define R9A08G045_PD_CANFD		55
+#define R9A08G045_PD_ADC		56
+#define R9A08G045_PD_TSU		57
+#define R9A08G045_PD_OCTA		58
+#define R9A08G045_PD_PDM		59
+#define R9A08G045_PD_PCI		60
+#define R9A08G045_PD_SPDIF		61
+#define R9A08G045_PD_I3C		62
+#define R9A08G045_PD_VBAT		63
+
+#define R9A08G045_PD_DDR		64
+#define R9A08G045_PD_TZCDDR		65
+#define R9A08G045_PD_OTFDE_DDR		66
+
 #endif /* __DT_BINDINGS_CLOCK_R9A08G045_CPG_H__ */

diff --git a/include/dt-bindings/clock/rk3568-cru.h b/include/dt-bindings/clock/rk3568-cru.h
index d298908..5263085 100644
--- a/include/dt-bindings/clock/rk3568-cru.h
+++ b/include/dt-bindings/clock/rk3568-cru.h

@@ -78,6 +78,7 @@
 #define CPLL_333M		9
 #define ARMCLK			10
 #define USB480M			11
+#define USB480M_PHY		12
 #define ACLK_CORE_NIU2BUS	18
 #define CLK_CORE_PVTM		19
 #define CLK_CORE_PVTM_CORE	20

diff --git a/include/dt-bindings/input/linux-event-codes.h b/include/dt-bindings/input/linux-event-codes.h
index 03edf2c..a420672 100644
--- a/include/dt-bindings/input/linux-event-codes.h
+++ b/include/dt-bindings/input/linux-event-codes.h

@@ -618,6 +618,8 @@
 #define KEY_CAMERA_ACCESS_ENABLE	0x24b	/* Enables programmatic access to camera devices. (HUTRR72) */
 #define KEY_CAMERA_ACCESS_DISABLE	0x24c	/* Disables programmatic access to camera devices. (HUTRR72) */
 #define KEY_CAMERA_ACCESS_TOGGLE	0x24d	/* Toggles the current state of the camera access control. (HUTRR72) */
+#define KEY_ACCESSIBILITY		0x24e	/* Toggles the system bound accessibility UI/command (HUTRR116) */
+#define KEY_DO_NOT_DISTURB		0x24f	/* Toggles the system-wide "Do Not Disturb" control (HUTRR94)*/
 
 #define KEY_BRIGHTNESS_MIN		0x250	/* Set Brightness to Minimum */
 #define KEY_BRIGHTNESS_MAX		0x251	/* Set Brightness to Maximum */

diff --git a/include/dt-bindings/leds/common.h b/include/dt-bindings/leds/common.h
index ecea167..4f017be 100644
--- a/include/dt-bindings/leds/common.h
+++ b/include/dt-bindings/leds/common.h

@@ -46,6 +46,7 @@
 #define LED_FUNCTION_CAPSLOCK "capslock"
 #define LED_FUNCTION_SCROLLLOCK "scrolllock"
 #define LED_FUNCTION_NUMLOCK "numlock"
+#define LED_FUNCTION_FNLOCK "fnlock"
 /*   Obsolete equivalents: "tpacpi::thinklight" (IBM/Lenovo Thinkpads),
      "lp5523:kb{1,2,3,4,5,6}" (Nokia N900) */
 #define LED_FUNCTION_KBD_BACKLIGHT "kbd_backlight"
@@ -90,11 +91,14 @@
 #define LED_FUNCTION_INDICATOR "indicator"
 #define LED_FUNCTION_LAN "lan"
 #define LED_FUNCTION_MAIL "mail"
+#define LED_FUNCTION_MOBILE "mobile"
 #define LED_FUNCTION_MTD "mtd"
 #define LED_FUNCTION_PANIC "panic"
 #define LED_FUNCTION_PROGRAMMING "programming"
 #define LED_FUNCTION_RX "rx"
 #define LED_FUNCTION_SD "sd"
+#define LED_FUNCTION_SPEED_LAN "speed-lan"
+#define LED_FUNCTION_SPEED_WAN "speed-wan"
 #define LED_FUNCTION_STANDBY "standby"
 #define LED_FUNCTION_TORCH "torch"
 #define LED_FUNCTION_TX "tx"

diff --git a/include/dt-bindings/net/ti-dp83867.h b/include/dt-bindings/net/ti-dp83867.h
index 6fc4b44..b8a4f3f 100644
--- a/include/dt-bindings/net/ti-dp83867.h
+++ b/include/dt-bindings/net/ti-dp83867.h

@@ -1,10 +1,10 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
+/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
 /*
  * Device Tree constants for the Texas Instruments DP83867 PHY
  *
  * Author: Dan Murphy <dmurphy@ti.com>
  *
- * Copyright:   (C) 2015 Texas Instruments, Inc.
+ * Copyright (C) 2015-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #ifndef _DT_BINDINGS_TI_DP83867_H

diff --git a/include/dt-bindings/net/ti-dp83869.h b/include/dt-bindings/net/ti-dp83869.h
index 218b1a6..917114a 100644
--- a/include/dt-bindings/net/ti-dp83869.h
+++ b/include/dt-bindings/net/ti-dp83869.h

@@ -1,10 +1,10 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
+/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
 /*
  * Device Tree constants for the Texas Instruments DP83869 PHY
  *
  * Author: Dan Murphy <dmurphy@ti.com>
  *
- * Copyright:   (C) 2019 Texas Instruments, Inc.
+ * Copyright (C) 2015-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #ifndef _DT_BINDINGS_TI_DP83869_H

diff --git a/include/dt-bindings/phy/phy-qcom-qmp.h b/include/dt-bindings/phy/phy-qcom-qmp.h
index 4edec4c..6b43ea9 100644
--- a/include/dt-bindings/phy/phy-qcom-qmp.h
+++ b/include/dt-bindings/phy/phy-qcom-qmp.h

@@ -17,4 +17,8 @@
 #define QMP_USB43DP_USB3_PHY		0
 #define QMP_USB43DP_DP_PHY		1
 
+/* QMP PCIE PHYs */
+#define QMP_PCIE_PIPE_CLK		0
+#define QMP_PCIE_PHY_AUX_CLK		1
+
 #endif /* _DT_BINDINGS_PHY_QMP */

diff --git a/include/dt-bindings/pinctrl/samsung.h b/include/dt-bindings/pinctrl/samsung.h
deleted file mode 100644
index d1da5ff..0000000
--- a/include/dt-bindings/pinctrl/samsung.h
+++ /dev/null

@@ -1,95 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Samsung's Exynos pinctrl bindings
- *
- * Copyright (c) 2016 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Author: Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#ifndef __DT_BINDINGS_PINCTRL_SAMSUNG_H__
-#define __DT_BINDINGS_PINCTRL_SAMSUNG_H__
-
-/*
- * These bindings are deprecated, because they do not match the actual
- * concept of bindings but rather contain pure register values.
- * Instead include the header in the DTS source directory.
- */
-#warning "These bindings are deprecated. Instead use the header in the DTS source directory."
-
-#define EXYNOS_PIN_PULL_NONE		0
-#define EXYNOS_PIN_PULL_DOWN		1
-#define EXYNOS_PIN_PULL_UP		3
-
-#define S3C64XX_PIN_PULL_NONE		0
-#define S3C64XX_PIN_PULL_DOWN		1
-#define S3C64XX_PIN_PULL_UP		2
-
-/* Pin function in power down mode */
-#define EXYNOS_PIN_PDN_OUT0		0
-#define EXYNOS_PIN_PDN_OUT1		1
-#define EXYNOS_PIN_PDN_INPUT		2
-#define EXYNOS_PIN_PDN_PREV		3
-
-/* Drive strengths for Exynos3250, Exynos4 (all) and Exynos5250 */
-#define EXYNOS4_PIN_DRV_LV1		0
-#define EXYNOS4_PIN_DRV_LV2		2
-#define EXYNOS4_PIN_DRV_LV3		1
-#define EXYNOS4_PIN_DRV_LV4		3
-
-/* Drive strengths for Exynos5260 */
-#define EXYNOS5260_PIN_DRV_LV1		0
-#define EXYNOS5260_PIN_DRV_LV2		1
-#define EXYNOS5260_PIN_DRV_LV4		2
-#define EXYNOS5260_PIN_DRV_LV6		3
-
-/*
- * Drive strengths for Exynos5410, Exynos542x, Exynos5800 and Exynos850 (except
- * GPIO_HSI block)
- */
-#define EXYNOS5420_PIN_DRV_LV1		0
-#define EXYNOS5420_PIN_DRV_LV2		1
-#define EXYNOS5420_PIN_DRV_LV3		2
-#define EXYNOS5420_PIN_DRV_LV4		3
-
-/* Drive strengths for Exynos5433 */
-#define EXYNOS5433_PIN_DRV_FAST_SR1	0
-#define EXYNOS5433_PIN_DRV_FAST_SR2	1
-#define EXYNOS5433_PIN_DRV_FAST_SR3	2
-#define EXYNOS5433_PIN_DRV_FAST_SR4	3
-#define EXYNOS5433_PIN_DRV_FAST_SR5	4
-#define EXYNOS5433_PIN_DRV_FAST_SR6	5
-#define EXYNOS5433_PIN_DRV_SLOW_SR1	8
-#define EXYNOS5433_PIN_DRV_SLOW_SR2	9
-#define EXYNOS5433_PIN_DRV_SLOW_SR3	0xa
-#define EXYNOS5433_PIN_DRV_SLOW_SR4	0xb
-#define EXYNOS5433_PIN_DRV_SLOW_SR5	0xc
-#define EXYNOS5433_PIN_DRV_SLOW_SR6	0xf
-
-/* Drive strengths for Exynos850 GPIO_HSI block */
-#define EXYNOS850_HSI_PIN_DRV_LV1	0	/* 1x   */
-#define EXYNOS850_HSI_PIN_DRV_LV1_5	1	/* 1.5x */
-#define EXYNOS850_HSI_PIN_DRV_LV2	2	/* 2x   */
-#define EXYNOS850_HSI_PIN_DRV_LV2_5	3	/* 2.5x */
-#define EXYNOS850_HSI_PIN_DRV_LV3	4	/* 3x   */
-#define EXYNOS850_HSI_PIN_DRV_LV4	5	/* 4x   */
-
-#define EXYNOS_PIN_FUNC_INPUT		0
-#define EXYNOS_PIN_FUNC_OUTPUT		1
-#define EXYNOS_PIN_FUNC_2		2
-#define EXYNOS_PIN_FUNC_3		3
-#define EXYNOS_PIN_FUNC_4		4
-#define EXYNOS_PIN_FUNC_5		5
-#define EXYNOS_PIN_FUNC_6		6
-#define EXYNOS_PIN_FUNC_EINT		0xf
-#define EXYNOS_PIN_FUNC_F		EXYNOS_PIN_FUNC_EINT
-
-/* Drive strengths for Exynos7 FSYS1 block */
-#define EXYNOS7_FSYS1_PIN_DRV_LV1	0
-#define EXYNOS7_FSYS1_PIN_DRV_LV2	4
-#define EXYNOS7_FSYS1_PIN_DRV_LV3	2
-#define EXYNOS7_FSYS1_PIN_DRV_LV4	6
-#define EXYNOS7_FSYS1_PIN_DRV_LV5	1
-#define EXYNOS7_FSYS1_PIN_DRV_LV6	5
-
-#endif /* __DT_BINDINGS_PINCTRL_SAMSUNG_H__ */

diff --git a/include/dt-bindings/reset/rockchip,rk3588-cru.h b/include/dt-bindings/reset/rockchip,rk3588-cru.h
index d4264db..e2fe4bd 100644
--- a/include/dt-bindings/reset/rockchip,rk3588-cru.h
+++ b/include/dt-bindings/reset/rockchip,rk3588-cru.h

@@ -751,4 +751,6 @@
 #define SRST_P_TRNG_CHK			658
 #define SRST_TRNG_S			659
 
+#define SRST_A_HDMIRX_BIU		660
+
 #endif

diff --git a/include/dt-bindings/reset/st,stm32mp25-rcc.h b/include/dt-bindings/reset/st,stm32mp25-rcc.h
index d561593..748e78a 100644
--- a/include/dt-bindings/reset/st,stm32mp25-rcc.h
+++ b/include/dt-bindings/reset/st,stm32mp25-rcc.h

@@ -69,7 +69,7 @@
 #define ADC3_R		59
 #define ETH1_R		60
 #define ETH2_R		61
-#define USB2_R		62
+#define USBH_R		62
 #define USB2PHY1_R	63
 #define USB2PHY2_R	64
 #define USB3DR_R	65

diff --git a/include/dt-bindings/thermal/mediatek,lvts-thermal.h b/include/dt-bindings/thermal/mediatek,lvts-thermal.h
index 997e2f5..bf95309 100644
--- a/include/dt-bindings/thermal/mediatek,lvts-thermal.h
+++ b/include/dt-bindings/thermal/mediatek,lvts-thermal.h

@@ -16,6 +16,32 @@
 #define MT7988_ETHWARP_0	6
 #define MT7988_ETHWARP_1	7
 
+#define MT8186_LITTLE_CPU0	0
+#define MT8186_LITTLE_CPU1	1
+#define MT8186_LITTLE_CPU2	2
+#define MT8186_CAM		3
+#define MT8186_BIG_CPU0	4
+#define MT8186_BIG_CPU1	5
+#define MT8186_NNA		6
+#define MT8186_ADSP		7
+#define MT8186_MFG		8
+
+#define MT8188_MCU_LITTLE_CPU0	0
+#define MT8188_MCU_LITTLE_CPU1	1
+#define MT8188_MCU_LITTLE_CPU2	2
+#define MT8188_MCU_LITTLE_CPU3	3
+#define MT8188_MCU_BIG_CPU0	4
+#define MT8188_MCU_BIG_CPU1	5
+
+#define MT8188_AP_APU		0
+#define MT8188_AP_GPU1		1
+#define MT8188_AP_GPU2		2
+#define MT8188_AP_SOC1		3
+#define MT8188_AP_SOC2		4
+#define MT8188_AP_SOC3		5
+#define MT8188_AP_CAM1		6
+#define MT8188_AP_CAM2		7
+
 #define MT8195_MCU_BIG_CPU0     0
 #define MT8195_MCU_BIG_CPU1     1
 #define MT8195_MCU_BIG_CPU2     2

diff --git a/scripts/cronjob b/scripts/cronjob
index f01166b..6cc1373 100755
--- a/scripts/cronjob
+++ b/scripts/cronjob

@@ -6,7 +6,7 @@
 
 UPSTREAM_GIT="git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git"
 
-BRANCHES="master filter-state upstream/master upstream/dts"
+BRANCHES="master filter-state-split upstream/master upstream/dts"
 
 if [ ! -f scripts/filter.sh ] ; then
     echo "`pwd`: does not appear to be a device-tree.git" 1>&2
@@ -75,7 +75,7 @@
 echo
 ) 2>&1 `
 
-#git push --dry-run origin filter-state upstream/dts upstream/master
+#git push --dry-run origin filter-state-split upstream/dts upstream/master
 #git push --dry-run origin --tags
 #echo
 

diff --git a/scripts/filter.sh b/scripts/filter.sh
index 5e10ff4..998b8f0 100755
--- a/scripts/filter.sh
+++ b/scripts/filter.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# git branch -D upstream/rewritten-prev upstream/master upstream/rewritten filter-state      
+# git branch -D upstream/rewritten-prev upstream/master upstream/rewritten filter-state-split
 
 set -e
 
@@ -29,12 +29,12 @@
 
 git branch -f $UPSTREAM_REWRITTEN FETCH_HEAD
 
-git filter-branch --force \
+PATH=$(git --exec-path):$PATH $SCRIPTS/git-filter-branch --force \
 	--index-filter ${SCRIPTS}/index-filter.sh \
 	--msg-filter 'cat && /bin/echo -e "\n[ upstream commit: $GIT_COMMIT ]"' \
 	--tag-name-filter 'while read t ; do /bin/echo -n $t-dts-raw ; done' \
 	--parent-filter 'sed "s/-p //g" | xargs -r git show-branch --independent | sed "s/\</-p /g"' \
-	--prune-empty --state-branch refs/heads/filter-state \
+	--prune-empty --state-branch refs/heads/filter-state-split \
 	-- $RANGE
 
 git branch -f $UPSTREAM_MASTER FETCH_HEAD

diff --git a/scripts/git-filter-branch b/scripts/git-filter-branch
new file mode 100755
index 0000000..690497c
--- /dev/null
+++ b/scripts/git-filter-branch

@@ -0,0 +1,673 @@
+#!/bin/sh
+#
+# Rewrite revision history
+# Copyright (c) Petr Baudis, 2006
+# Minimal changes to "port" it to core-git (c) Johannes Schindelin, 2007
+#
+# Lets you rewrite the revision history of the current branch, creating
+# a new branch. You can specify a number of filters to modify the commits,
+# files and trees.
+
+# The following functions will also be available in the commit filter:
+
+functions=$(cat << \EOF
+EMPTY_TREE=$(git hash-object -t tree /dev/null)
+
+warn () {
+	echo "$*" >&2
+}
+
+map()
+{
+	# if it was not rewritten, take the original
+	if test -r "$workdir/../map/$1"
+	then
+		cat "$workdir/../map/$1"
+	else
+		echo "$1"
+	fi
+}
+
+# if you run 'skip_commit "$@"' in a commit filter, it will print
+# the (mapped) parents, effectively skipping the commit.
+
+skip_commit()
+{
+	shift;
+	while [ -n "$1" ];
+	do
+		shift;
+		map "$1";
+		shift;
+	done;
+}
+
+# if you run 'git_commit_non_empty_tree "$@"' in a commit filter,
+# it will skip commits that leave the tree untouched, commit the other.
+git_commit_non_empty_tree()
+{
+	if test $# = 3 && test "$1" = $(git rev-parse "$3^{tree}"); then
+		map "$3"
+	elif test $# = 1 && test "$1" = $EMPTY_TREE; then
+		:
+	else
+		git commit-tree "$@"
+	fi
+}
+# override die(): this version puts in an extra line break, so that
+# the progress is still visible
+
+die()
+{
+	echo >&2
+	echo "$*" >&2
+	exit 1
+}
+EOF
+)
+
+eval "$functions"
+
+finish_ident() {
+	# Ensure non-empty id name.
+	echo "case \"\$GIT_$1_NAME\" in \"\") GIT_$1_NAME=\"\${GIT_$1_EMAIL%%@*}\" && export GIT_$1_NAME;; esac"
+	# And make sure everything is exported.
+	echo "export GIT_$1_NAME"
+	echo "export GIT_$1_EMAIL"
+	echo "export GIT_$1_DATE"
+}
+
+set_ident () {
+	parse_ident_from_commit author AUTHOR committer COMMITTER
+	finish_ident AUTHOR
+	finish_ident COMMITTER
+}
+
+if test -z "$FILTER_BRANCH_SQUELCH_WARNING$GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS"
+then
+	cat <<EOF
+WARNING: git-filter-branch has a glut of gotchas generating mangled history
+	 rewrites.  Hit Ctrl-C before proceeding to abort, then use an
+	 alternative filtering tool such as 'git filter-repo'
+	 (https://github.com/newren/git-filter-repo/) instead.  See the
+	 filter-branch manual page for more details; to squelch this warning,
+	 set FILTER_BRANCH_SQUELCH_WARNING=1.
+EOF
+	sleep 10
+	printf "Proceeding with filter-branch...\n\n"
+fi
+
+USAGE="[--setup <command>] [--subdirectory-filter <directory>] [--env-filter <command>]
+	[--tree-filter <command>] [--index-filter <command>]
+	[--parent-filter <command>] [--msg-filter <command>]
+	[--commit-filter <command>] [--tag-name-filter <command>]
+	[--original <namespace>]
+	[-d <directory>] [-f | --force] [--state-branch <branch>]
+	[--] [<rev-list options>...]"
+
+OPTIONS_SPEC=
+. git-sh-setup
+
+if [ "$(is_bare_repository)" = false ]; then
+	require_clean_work_tree 'rewrite branches'
+fi
+
+tempdir=.git-rewrite
+filter_setup=
+filter_env=
+filter_tree=
+filter_index=
+filter_parent=
+filter_msg=cat
+filter_commit=
+filter_tag_name=
+filter_subdir=
+state_branch=
+orig_namespace=refs/original/
+force=
+prune_empty=
+remap_to_ancestor=
+while :
+do
+	case "$1" in
+	--)
+		shift
+		break
+		;;
+	--force|-f)
+		shift
+		force=t
+		continue
+		;;
+	--remap-to-ancestor)
+		# deprecated ($remap_to_ancestor is set now automatically)
+		shift
+		remap_to_ancestor=t
+		continue
+		;;
+	--prune-empty)
+		shift
+		prune_empty=t
+		continue
+		;;
+	-*)
+		;;
+	*)
+		break;
+	esac
+
+	# all switches take one argument
+	ARG="$1"
+	case "$#" in 1) usage ;; esac
+	shift
+	OPTARG="$1"
+	shift
+
+	case "$ARG" in
+	-d)
+		tempdir="$OPTARG"
+		;;
+	--setup)
+		filter_setup="$OPTARG"
+		;;
+	--subdirectory-filter)
+		filter_subdir="$OPTARG"
+		remap_to_ancestor=t
+		;;
+	--env-filter)
+		filter_env="$OPTARG"
+		;;
+	--tree-filter)
+		filter_tree="$OPTARG"
+		;;
+	--index-filter)
+		filter_index="$OPTARG"
+		;;
+	--parent-filter)
+		filter_parent="$OPTARG"
+		;;
+	--msg-filter)
+		filter_msg="$OPTARG"
+		;;
+	--commit-filter)
+		filter_commit="$functions; $OPTARG"
+		;;
+	--tag-name-filter)
+		filter_tag_name="$OPTARG"
+		;;
+	--original)
+		orig_namespace=$(expr "$OPTARG/" : '\(.*[^/]\)/*$')/
+		;;
+	--state-branch)
+		state_branch="$OPTARG"
+		;;
+	*)
+		usage
+		;;
+	esac
+done
+
+case "$prune_empty,$filter_commit" in
+,)
+	filter_commit='git commit-tree "$@"';;
+t,)
+	filter_commit="$functions;"' git_commit_non_empty_tree "$@"';;
+,*)
+	;;
+*)
+	die "Cannot set --prune-empty and --commit-filter at the same time"
+esac
+
+case "$force" in
+t)
+	rm -rf "$tempdir"
+;;
+'')
+	test -d "$tempdir" &&
+		die "$tempdir already exists, please remove it"
+esac
+orig_dir=$(pwd)
+mkdir -p "$tempdir/t" &&
+tempdir="$(cd "$tempdir"; pwd)" &&
+cd "$tempdir/t" &&
+workdir="$(pwd)" ||
+die ""
+
+# Remove tempdir on exit
+trap 'cd "$orig_dir"; rm -rf "$tempdir"' 0
+
+ORIG_GIT_DIR="$GIT_DIR"
+ORIG_GIT_WORK_TREE="$GIT_WORK_TREE"
+ORIG_GIT_INDEX_FILE="$GIT_INDEX_FILE"
+ORIG_GIT_AUTHOR_NAME="$GIT_AUTHOR_NAME"
+ORIG_GIT_AUTHOR_EMAIL="$GIT_AUTHOR_EMAIL"
+ORIG_GIT_AUTHOR_DATE="$GIT_AUTHOR_DATE"
+ORIG_GIT_COMMITTER_NAME="$GIT_COMMITTER_NAME"
+ORIG_GIT_COMMITTER_EMAIL="$GIT_COMMITTER_EMAIL"
+ORIG_GIT_COMMITTER_DATE="$GIT_COMMITTER_DATE"
+
+GIT_WORK_TREE=.
+export GIT_DIR GIT_WORK_TREE
+
+# Make sure refs/original is empty
+git for-each-ref > "$tempdir"/backup-refs || exit
+while read sha1 type name
+do
+	case "$force,$name" in
+	,$orig_namespace*)
+		die "Cannot create a new backup.
+A previous backup already exists in $orig_namespace
+Force overwriting the backup with -f"
+	;;
+	t,$orig_namespace*)
+		git update-ref -d "$name" $sha1
+	;;
+	esac
+done < "$tempdir"/backup-refs
+
+# The refs should be updated if their heads were rewritten
+git rev-parse --no-flags --revs-only --symbolic-full-name \
+	--default HEAD "$@" > "$tempdir"/raw-refs || exit
+while read ref
+do
+	case "$ref" in ^?*) continue ;; esac
+
+	if git rev-parse --verify "$ref"^0 >/dev/null 2>&1
+	then
+		echo "$ref"
+	else
+		warn "WARNING: not rewriting '$ref' (not a committish)"
+	fi
+done >"$tempdir"/heads <"$tempdir"/raw-refs
+
+test -s "$tempdir"/heads ||
+	die "You must specify a ref to rewrite."
+
+GIT_INDEX_FILE="$(pwd)/../index"
+export GIT_INDEX_FILE
+
+# map old->new commit ids for rewriting parents
+mkdir ../map || die "Could not create map/ directory"
+
+state_prefixes="0 1 2 3 4 5 6 7 8 9 a b c d e f"
+
+if test -n "$state_branch"
+then
+	state_commit=$(git rev-parse --no-flags --revs-only "$state_branch")
+	if test -n "$state_commit"
+	then
+		echo "Populating map from $state_branch ($state_commit)" 1>&2
+		for prefix in $state_prefixes ; do
+			perl -e'open(MAP, "-|", "git show $ARGV[0]:$ARGV[1]") or die;
+				while (<MAP>) {
+					m/(.*):(.*)/ or die;
+					open F, ">../map/$1" or die;
+					print F "$2" or die;
+					close(F) or die;
+				}
+				close(MAP) or die;' "$state_commit" "filter_${prefix}.map" \
+					|| die "Unable to load state from $state_branch:filter_${prefix}.map"
+		done
+	else
+		echo "Branch $state_branch does not exist. Will create" 1>&2
+	fi
+fi
+
+# we need "--" only if there are no path arguments in $@
+nonrevs=$(git rev-parse --no-revs "$@") || exit
+if test -z "$nonrevs"
+then
+	dashdash=--
+else
+	dashdash=
+	remap_to_ancestor=t
+fi
+
+git rev-parse --revs-only "$@" >../parse
+
+case "$filter_subdir" in
+"")
+	eval set -- "$(git rev-parse --sq --no-revs "$@")"
+	;;
+*)
+	eval set -- "$(git rev-parse --sq --no-revs "$@" $dashdash \
+		"$filter_subdir")"
+	;;
+esac
+
+git rev-list --reverse --topo-order --default HEAD \
+	--parents --simplify-merges --stdin "$@" <../parse >../revs ||
+	die "Could not get the commits"
+commits=$(wc -l <../revs | tr -d " ")
+
+test $commits -eq 0 && die_with_status 2 "Found nothing to rewrite"
+
+# Rewrite the commits
+report_progress ()
+{
+	if test -n "$progress" &&
+		test $git_filter_branch__commit_count -gt $next_sample_at
+	then
+		count=$git_filter_branch__commit_count
+
+		now=$(date +%s)
+		elapsed=$(($now - $start_timestamp))
+		remaining=$(( ($commits - $count) * $elapsed / $count ))
+		if test $elapsed -gt 0
+		then
+			next_sample_at=$(( ($elapsed + 1) * $count / $elapsed ))
+		else
+			next_sample_at=$(($next_sample_at + 1))
+		fi
+		progress=" ($elapsed seconds passed, remaining $remaining predicted)"
+	fi
+	printf "\rRewrite $commit ($count/$commits)$progress    "
+}
+
+git_filter_branch__commit_count=0
+
+progress= start_timestamp=
+if date '+%s' 2>/dev/null | grep -q '^[0-9][0-9]*$'
+then
+	next_sample_at=0
+	progress="dummy to ensure this is not empty"
+	start_timestamp=$(date '+%s')
+fi
+
+if test -n "$filter_index" ||
+   test -n "$filter_tree" ||
+   test -n "$filter_subdir"
+then
+	need_index=t
+else
+	need_index=
+fi
+
+eval "$filter_setup" < /dev/null ||
+	die "filter setup failed: $filter_setup"
+
+while read commit parents; do
+	git_filter_branch__commit_count=$(($git_filter_branch__commit_count+1))
+
+	report_progress
+	test -f "$workdir"/../map/$commit && continue
+
+	case "$filter_subdir" in
+	"")
+		if test -n "$need_index"
+		then
+			GIT_ALLOW_NULL_SHA1=1 git read-tree -i -m $commit
+		fi
+		;;
+	*)
+		# The commit may not have the subdirectory at all
+		err=$(GIT_ALLOW_NULL_SHA1=1 \
+		      git read-tree -i -m $commit:"$filter_subdir" 2>&1) || {
+			if ! git rev-parse -q --verify $commit:"$filter_subdir"
+			then
+				rm -f "$GIT_INDEX_FILE"
+			else
+				echo >&2 "$err"
+				false
+			fi
+		}
+	esac || die "Could not initialize the index"
+
+	GIT_COMMIT=$commit
+	export GIT_COMMIT
+	git cat-file commit "$commit" >../commit ||
+		die "Cannot read commit $commit"
+
+	eval "$(set_ident <../commit)" ||
+		die "setting author/committer failed for commit $commit"
+	eval "$filter_env" < /dev/null ||
+		die "env filter failed: $filter_env"
+
+	if [ "$filter_tree" ]; then
+		git checkout-index -f -u -a ||
+			die "Could not checkout the index"
+		# files that $commit removed are now still in the working tree;
+		# remove them, else they would be added again
+		git clean -d -q -f -x
+		eval "$filter_tree" < /dev/null ||
+			die "tree filter failed: $filter_tree"
+
+		(
+			git diff-index -r --name-only --ignore-submodules $commit -- &&
+			git ls-files --others
+		) > "$tempdir"/tree-state || exit
+		git update-index --add --replace --remove --stdin \
+			< "$tempdir"/tree-state || exit
+	fi
+
+	eval "$filter_index" < /dev/null ||
+		die "index filter failed: $filter_index"
+
+	parentstr=
+	for parent in $parents; do
+		for reparent in $(map "$parent"); do
+			case "$parentstr " in
+			*" -p $reparent "*)
+				;;
+			*)
+				parentstr="$parentstr -p $reparent"
+				;;
+			esac
+		done
+	done
+	if [ "$filter_parent" ]; then
+		parentstr="$(echo "$parentstr" | eval "$filter_parent")" ||
+				die "parent filter failed: $filter_parent"
+	fi
+
+	{
+		while IFS='' read -r header_line && test -n "$header_line"
+		do
+			# skip header lines...
+			:;
+		done
+		# and output the actual commit message
+		cat
+	} <../commit |
+		eval "$filter_msg" > ../message ||
+			die "msg filter failed: $filter_msg"
+
+	if test -n "$need_index"
+	then
+		tree=$(git write-tree)
+	else
+		tree=$(git rev-parse "$commit^{tree}")
+	fi
+	workdir=$workdir /bin/sh -c "$filter_commit" "git commit-tree" \
+		"$tree" $parentstr < ../message > ../map/$commit ||
+			die "could not write rewritten commit"
+done <../revs
+
+# If we are filtering for paths, as in the case of a subdirectory
+# filter, it is possible that a specified head is not in the set of
+# rewritten commits, because it was pruned by the revision walker.
+# Ancestor remapping fixes this by mapping these heads to the unique
+# nearest ancestor that survived the pruning.
+
+if test "$remap_to_ancestor" = t
+then
+	while read ref
+	do
+		sha1=$(git rev-parse "$ref"^0)
+		test -f "$workdir"/../map/$sha1 && continue
+		ancestor=$(git rev-list --simplify-merges -1 "$ref" "$@")
+		test "$ancestor" && echo $(map $ancestor) >"$workdir"/../map/$sha1
+	done < "$tempdir"/heads
+fi
+
+# Finally update the refs
+
+echo
+while read ref
+do
+	# avoid rewriting a ref twice
+	test -f "$orig_namespace$ref" && continue
+
+	sha1=$(git rev-parse "$ref"^0)
+	rewritten=$(map $sha1)
+
+	test $sha1 = "$rewritten" &&
+		warn "WARNING: Ref '$ref' is unchanged" &&
+		continue
+
+	case "$rewritten" in
+	'')
+		echo "Ref '$ref' was deleted"
+		git update-ref -m "filter-branch: delete" -d "$ref" $sha1 ||
+			die "Could not delete $ref"
+	;;
+	*)
+		echo "Ref '$ref' was rewritten"
+		if ! git update-ref -m "filter-branch: rewrite" \
+					"$ref" $rewritten $sha1 2>/dev/null; then
+			if test $(git cat-file -t "$ref") = tag; then
+				if test -z "$filter_tag_name"; then
+					warn "WARNING: You said to rewrite tagged commits, but not the corresponding tag."
+					warn "WARNING: Perhaps use '--tag-name-filter cat' to rewrite the tag."
+				fi
+			else
+				die "Could not rewrite $ref"
+			fi
+		fi
+	;;
+	esac
+	git update-ref -m "filter-branch: backup" "$orig_namespace$ref" $sha1 ||
+		 exit
+done < "$tempdir"/heads
+
+# TODO: This should possibly go, with the semantics that all positive given
+#       refs are updated, and their original heads stored in refs/original/
+# Filter tags
+
+if [ "$filter_tag_name" ]; then
+	git for-each-ref --format='%(objectname) %(objecttype) %(refname)' refs/tags |
+	while read sha1 type ref; do
+		ref="${ref#refs/tags/}"
+		# XXX: Rewrite tagged trees as well?
+		if [ "$type" != "commit" -a "$type" != "tag" ]; then
+			continue;
+		fi
+
+		if [ "$type" = "tag" ]; then
+			# Dereference to a commit
+			sha1t="$sha1"
+			sha1="$(git rev-parse -q "$sha1"^{commit})" || continue
+		fi
+
+		[ -f "../map/$sha1" ] || continue
+		new_sha1="$(cat "../map/$sha1")"
+		GIT_COMMIT="$sha1"
+		export GIT_COMMIT
+		new_ref="$(echo "$ref" | eval "$filter_tag_name")" ||
+			die "tag name filter failed: $filter_tag_name"
+
+		echo "$ref -> $new_ref ($sha1 -> $new_sha1)"
+
+		if [ "$type" = "tag" ]; then
+			new_sha1=$( ( printf 'object %s\ntype commit\ntag %s\n' \
+						"$new_sha1" "$new_ref"
+				git cat-file tag "$ref" |
+				sed -n \
+				    -e '1,/^$/{
+					  /^object /d
+					  /^type /d
+					  /^tag /d
+					}' \
+				    -e '/^-----BEGIN PGP SIGNATURE-----/q' \
+				    -e 'p' ) |
+				git hash-object -t tag -w --stdin) ||
+				die "Could not create new tag object for $ref"
+			if git cat-file tag "$ref" | \
+			   grep '^-----BEGIN PGP SIGNATURE-----' >/dev/null 2>&1
+			then
+				warn "gpg signature stripped from tag object $sha1t"
+			fi
+		fi
+
+		git update-ref "refs/tags/$new_ref" "$new_sha1" ||
+			die "Could not write tag $new_ref"
+	done
+fi
+
+unset GIT_DIR GIT_WORK_TREE GIT_INDEX_FILE
+unset GIT_AUTHOR_NAME GIT_AUTHOR_EMAIL GIT_AUTHOR_DATE
+unset GIT_COMMITTER_NAME GIT_COMMITTER_EMAIL GIT_COMMITTER_DATE
+test -z "$ORIG_GIT_DIR" || {
+	GIT_DIR="$ORIG_GIT_DIR" && export GIT_DIR
+}
+test -z "$ORIG_GIT_WORK_TREE" || {
+	GIT_WORK_TREE="$ORIG_GIT_WORK_TREE" &&
+	export GIT_WORK_TREE
+}
+test -z "$ORIG_GIT_INDEX_FILE" || {
+	GIT_INDEX_FILE="$ORIG_GIT_INDEX_FILE" &&
+	export GIT_INDEX_FILE
+}
+test -z "$ORIG_GIT_AUTHOR_NAME" || {
+	GIT_AUTHOR_NAME="$ORIG_GIT_AUTHOR_NAME" &&
+	export GIT_AUTHOR_NAME
+}
+test -z "$ORIG_GIT_AUTHOR_EMAIL" || {
+	GIT_AUTHOR_EMAIL="$ORIG_GIT_AUTHOR_EMAIL" &&
+	export GIT_AUTHOR_EMAIL
+}
+test -z "$ORIG_GIT_AUTHOR_DATE" || {
+	GIT_AUTHOR_DATE="$ORIG_GIT_AUTHOR_DATE" &&
+	export GIT_AUTHOR_DATE
+}
+test -z "$ORIG_GIT_COMMITTER_NAME" || {
+	GIT_COMMITTER_NAME="$ORIG_GIT_COMMITTER_NAME" &&
+	export GIT_COMMITTER_NAME
+}
+test -z "$ORIG_GIT_COMMITTER_EMAIL" || {
+	GIT_COMMITTER_EMAIL="$ORIG_GIT_COMMITTER_EMAIL" &&
+	export GIT_COMMITTER_EMAIL
+}
+test -z "$ORIG_GIT_COMMITTER_DATE" || {
+	GIT_COMMITTER_DATE="$ORIG_GIT_COMMITTER_DATE" &&
+	export GIT_COMMITTER_DATE
+}
+
+if test -n "$state_branch"
+then
+	echo "Saving rewrite state to $state_branch" 1>&2
+	for prefix in $state_prefixes ; do
+		state_blob=$(
+			perl -e'opendir D, "../map" or die;
+				open H, "|-", "git hash-object -w --stdin" or die;
+				foreach (sort readdir(D)) {
+					next if m/^\.\.?$/;
+					next unless m/^$ARGV[0]/;
+					open F, "<../map/$_" or die;
+					chomp($f = <F>);
+					print H "$_:$f\n" or die;
+				}
+				close(H) or die;' "$prefix" || die "Unable to save state")
+		printf '100644 blob %s\tfilter_%s.map\n' "$state_blob" "$prefix" >> $tempdir/state-branch-tree
+	done
+	state_tree=$(cat $tempdir/state-branch-tree | git mktree)
+
+	if test -n "$state_commit"
+	then
+		state_commit=$(echo "Sync" | git commit-tree "$state_tree" -p "$state_commit")
+	else
+		state_commit=$(echo "Sync" | git commit-tree "$state_tree" )
+	fi
+	git update-ref "$state_branch" "$state_commit"
+fi
+
+cd "$orig_dir"
+rm -rf "$tempdir"
+
+trap - 0
+
+if [ "$(is_bare_repository)" = false ]; then
+	git read-tree -u -m HEAD || exit
+fi
+
+exit 0

diff --git a/src/arm/allwinner/sun5i-a13-pocketbook-614-plus.dts b/src/arm/allwinner/sun5i-a13-pocketbook-614-plus.dts
new file mode 100644
index 0000000..ab8d138
--- /dev/null
+++ b/src/arm/allwinner/sun5i-a13-pocketbook-614-plus.dts

@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 Denis Burkov <hitechshell@mail.ru>
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "PocketBook 614 Plus";
+	compatible = "pocketbook,614-plus", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			linux,default-trigger = "default-on";
+			gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-0 {
+			label = "Right";
+			linux,code = <KEY_NEXT>;
+			gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; /* PG9 */
+		};
+
+		key-1 {
+			label = "Left";
+			linux,code = <KEY_PREVIOUS>;
+			gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
+		};
+	};
+
+	reg_3v3_mmc0: regulator-mmc0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-mmc0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */
+		vin-supply = <&reg_vcc3v3>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-300 {
+		label = "Down";
+		linux,code = <KEY_DOWN>;
+		channel = <0>;
+		voltage = <300000>;
+	};
+
+	button-700 {
+		label = "Up";
+		linux,code = <KEY_UP>;
+		channel = <0>;
+		voltage = <700000>;
+	};
+
+	button-1000 {
+		label = "Left";
+		linux,code = <KEY_LEFT>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+
+	button-1500 {
+		label = "Right";
+		linux,code = <KEY_RIGHT>;
+		channel = <0>;
+		voltage = <1500000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_3v3_mmc0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pc_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};

diff --git a/src/arm/allwinner/sun5i-a13.dtsi b/src/arm/allwinner/sun5i-a13.dtsi
index 3325ab0..2c9152b 100644
--- a/src/arm/allwinner/sun5i-a13.dtsi
+++ b/src/arm/allwinner/sun5i-a13.dtsi

@@ -62,14 +62,14 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit: cpu_crit {
+				cpu_crit: cpu-crit {
 					/* milliCelsius */
 					temperature = <100000>;
 					hysteresis = <2000>;

diff --git a/src/arm/allwinner/sun5i-gr8-chip-pro.dts b/src/arm/allwinner/sun5i-gr8-chip-pro.dts
index 5c3562b..ffbd99c 100644
--- a/src/arm/allwinner/sun5i-gr8-chip-pro.dts
+++ b/src/arm/allwinner/sun5i-gr8-chip-pro.dts

@@ -77,7 +77,7 @@
 		};
 	};
 
-	mmc0_pwrseq: mmc0_pwrseq {
+	mmc0_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
 	};

diff --git a/src/arm/allwinner/sun5i-r8-chip.dts b/src/arm/allwinner/sun5i-r8-chip.dts
index 4192c23..8c784a2 100644
--- a/src/arm/allwinner/sun5i-r8-chip.dts
+++ b/src/arm/allwinner/sun5i-r8-chip.dts

@@ -77,7 +77,7 @@
 		};
 	};
 
-	mmc0_pwrseq: mmc0_pwrseq {
+	mmc0_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */
 	};

diff --git a/src/arm/allwinner/sun6i-a31-hummingbird.dts b/src/arm/allwinner/sun6i-a31-hummingbird.dts
index 236ebfc..5bce7a3 100644
--- a/src/arm/allwinner/sun6i-a31-hummingbird.dts
+++ b/src/arm/allwinner/sun6i-a31-hummingbird.dts

@@ -109,7 +109,7 @@
 		};
 	};
 
-	reg_vga_3v3: vga_3v3_regulator {
+	reg_vga_3v3: vga-3v3-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vga-3v3";
 		regulator-min-microvolt = <3300000>;
@@ -119,7 +119,7 @@
 		gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
 	};

diff --git a/src/arm/allwinner/sun6i-a31.dtsi b/src/arm/allwinner/sun6i-a31.dtsi
index 5cce491..f0145d6 100644
--- a/src/arm/allwinner/sun6i-a31.dtsi
+++ b/src/arm/allwinner/sun6i-a31.dtsi

@@ -179,14 +179,14 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <70000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit: cpu_crit {
+				cpu_crit: cpu-crit {
 					/* milliCelsius */
 					temperature = <100000>;
 					hysteresis = <2000>;
@@ -1318,7 +1318,7 @@
 			compatible = "allwinner,sun6i-a31-prcm";
 			reg = <0x01f01400 0x200>;
 
-			ar100: ar100_clk {
+			ar100: ar100-clk {
 				compatible = "allwinner,sun6i-a31-ar100-clk";
 				#clock-cells = <0>;
 				clocks = <&rtc CLK_OSC32K>, <&osc24M>,
@@ -1327,7 +1327,7 @@
 				clock-output-names = "ar100";
 			};
 
-			ahb0: ahb0_clk {
+			ahb0: ahb0-clk {
 				compatible = "fixed-factor-clock";
 				#clock-cells = <0>;
 				clock-div = <1>;
@@ -1336,14 +1336,14 @@
 				clock-output-names = "ahb0";
 			};
 
-			apb0: apb0_clk {
+			apb0: apb0-clk {
 				compatible = "allwinner,sun6i-a31-apb0-clk";
 				#clock-cells = <0>;
 				clocks = <&ahb0>;
 				clock-output-names = "apb0";
 			};
 
-			apb0_gates: apb0_gates_clk {
+			apb0_gates: apb0-gates-clk {
 				compatible = "allwinner,sun6i-a31-apb0-gates-clk";
 				#clock-cells = <1>;
 				clocks = <&apb0>;
@@ -1353,14 +1353,14 @@
 						"apb0_i2c";
 			};
 
-			ir_clk: ir_clk {
+			ir_clk: ir-clk {
 				#clock-cells = <0>;
 				compatible = "allwinner,sun4i-a10-mod0-clk";
 				clocks = <&rtc CLK_OSC32K>, <&osc24M>;
 				clock-output-names = "ir";
 			};
 
-			apb0_rst: apb0_rst {
+			apb0_rst: apb0-rst {
 				compatible = "allwinner,sun6i-a31-clock-reset";
 				#reset-cells = <1>;
 			};

diff --git a/src/arm/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts b/src/arm/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts
index 96554ab..f63d67e 100644
--- a/src/arm/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/src/arm/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts

@@ -75,7 +75,7 @@
 		};
 	};
 
-	mmc2_pwrseq: mmc2_pwrseq {
+	mmc2_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */
 	};

diff --git a/src/arm/allwinner/sun7i-a20-bananapi-m1-plus.dts b/src/arm/allwinner/sun7i-a20-bananapi-m1-plus.dts
index caa935c..f2d7fab 100644
--- a/src/arm/allwinner/sun7i-a20-bananapi-m1-plus.dts
+++ b/src/arm/allwinner/sun7i-a20-bananapi-m1-plus.dts

@@ -86,7 +86,7 @@
 		};
 	};
 
-	mmc3_pwrseq: mmc3_pwrseq {
+	mmc3_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
 	};

diff --git a/src/arm/allwinner/sun7i-a20-cubietruck.dts b/src/arm/allwinner/sun7i-a20-cubietruck.dts
index 52160e3..be9b31d 100644
--- a/src/arm/allwinner/sun7i-a20-cubietruck.dts
+++ b/src/arm/allwinner/sun7i-a20-cubietruck.dts

@@ -96,7 +96,7 @@
 		};
 	};
 
-	mmc3_pwrseq: mmc3_pwrseq {
+	mmc3_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
 		clocks = <&ccu CLK_OUT_A>;

diff --git a/src/arm/allwinner/sun7i-a20-hummingbird.dts b/src/arm/allwinner/sun7i-a20-hummingbird.dts
index 3def2a3..f1e26b7 100644
--- a/src/arm/allwinner/sun7i-a20-hummingbird.dts
+++ b/src/arm/allwinner/sun7i-a20-hummingbird.dts

@@ -65,7 +65,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	reg_mmc3_vdd: mmc3_vdd {
+	reg_mmc3_vdd: regulator-mmc3-vdd {
 		compatible = "regulator-fixed";
 		regulator-name = "mmc3_vdd";
 		regulator-min-microvolt = <3000000>;
@@ -74,7 +74,7 @@
 		gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
 	};
 
-	reg_gmac_vdd: gmac_vdd {
+	reg_gmac_vdd: regulator-gmac-vdd {
 		compatible = "regulator-fixed";
 		regulator-name = "gmac_vdd";
 		regulator-min-microvolt = <3000000>;

diff --git a/src/arm/allwinner/sun7i-a20-olimex-som-evb-emmc.dts b/src/arm/allwinner/sun7i-a20-olimex-som-evb-emmc.dts
index 20bf09b..fb83573 100644
--- a/src/arm/allwinner/sun7i-a20-olimex-som-evb-emmc.dts
+++ b/src/arm/allwinner/sun7i-a20-olimex-som-evb-emmc.dts

@@ -14,7 +14,7 @@
 	model = "Olimex A20-Olimex-SOM-EVB-eMMC";
 	compatible = "olimex,a20-olimex-som-evb-emmc", "allwinner,sun7i-a20";
 
-	mmc2_pwrseq: mmc2_pwrseq {
+	mmc2_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&pio 2 18 GPIO_ACTIVE_LOW>;
 	};

diff --git a/src/arm/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts b/src/arm/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts
index a59755a..e8977c2 100644
--- a/src/arm/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts
+++ b/src/arm/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts

@@ -13,7 +13,7 @@
 	model = "Olimex A20-SOM204-EVB-eMMC";
 	compatible = "olimex,a20-olimex-som204-evb-emmc", "allwinner,sun7i-a20";
 
-	mmc2_pwrseq: mmc2_pwrseq {
+	mmc2_pwrseq: pwrseq-1 {
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
 	};

diff --git a/src/arm/allwinner/sun7i-a20-olimex-som204-evb.dts b/src/arm/allwinner/sun7i-a20-olimex-som204-evb.dts
index 54af6c1..a554066 100644
--- a/src/arm/allwinner/sun7i-a20-olimex-som204-evb.dts
+++ b/src/arm/allwinner/sun7i-a20-olimex-som204-evb.dts

@@ -65,7 +65,7 @@
 		};
 	};
 
-	rtl_pwrseq: rtl_pwrseq {
+	rtl_pwrseq: pwrseq-0 {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>;
 	};
@@ -177,7 +177,7 @@
 	non-removable;
 	status = "okay";
 
-	rtl8723bs: sdio_wifi@1 {
+	rtl8723bs: wifi@1 {
 		reg = <1>;
 	};
 };

diff --git a/src/arm/allwinner/sun7i-a20-olinuxino-lime2.dts b/src/arm/allwinner/sun7i-a20-olinuxino-lime2.dts
index ecb91fb..435a189 100644
--- a/src/arm/allwinner/sun7i-a20-olinuxino-lime2.dts
+++ b/src/arm/allwinner/sun7i-a20-olinuxino-lime2.dts

@@ -82,7 +82,7 @@
 		};
 	};
 
-	reg_axp_ipsout: axp_ipsout {
+	reg_axp_ipsout: regulator-axp-ipsout {
 		compatible = "regulator-fixed";
 		regulator-name = "axp-ipsout";
 		regulator-min-microvolt = <5000000>;

diff --git a/src/arm/allwinner/sun7i-a20-wits-pro-a20-dkt.dts b/src/arm/allwinner/sun7i-a20-wits-pro-a20-dkt.dts
index 3bfae98..29199b6 100644
--- a/src/arm/allwinner/sun7i-a20-wits-pro-a20-dkt.dts
+++ b/src/arm/allwinner/sun7i-a20-wits-pro-a20-dkt.dts

@@ -60,7 +60,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	mmc3_pwrseq: mmc3_pwrseq {
+	mmc3_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
 	};

diff --git a/src/arm/allwinner/sun7i-a20.dtsi b/src/arm/allwinner/sun7i-a20.dtsi
index 5574299..5f44f09 100644
--- a/src/arm/allwinner/sun7i-a20.dtsi
+++ b/src/arm/allwinner/sun7i-a20.dtsi

@@ -153,14 +153,14 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit: cpu_crit {
+				cpu_crit: cpu-crit {
 					/* milliCelsius */
 					temperature = <100000>;
 					hysteresis = <2000>;

diff --git a/src/arm/allwinner/sun8i-a23-a33.dtsi b/src/arm/allwinner/sun8i-a23-a33.dtsi
index cd4bf60..2af8382 100644
--- a/src/arm/allwinner/sun8i-a23-a33.dtsi
+++ b/src/arm/allwinner/sun8i-a23-a33.dtsi

@@ -108,7 +108,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		osc24M: osc24M_clk {
+		osc24M: osc24M-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
@@ -116,7 +116,7 @@
 			clock-output-names = "osc24M";
 		};
 
-		ext_osc32k: ext_osc32k_clk {
+		ext_osc32k: ext-osc32k-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
@@ -733,7 +733,7 @@
 			compatible = "allwinner,sun8i-a23-prcm";
 			reg = <0x01f01400 0x200>;
 
-			ar100: ar100_clk {
+			ar100: ar100-clk {
 				compatible = "fixed-factor-clock";
 				#clock-cells = <0>;
 				clock-div = <1>;
@@ -742,7 +742,7 @@
 				clock-output-names = "ar100";
 			};
 
-			ahb0: ahb0_clk {
+			ahb0: ahb0-clk {
 				compatible = "fixed-factor-clock";
 				#clock-cells = <0>;
 				clock-div = <1>;
@@ -751,14 +751,14 @@
 				clock-output-names = "ahb0";
 			};
 
-			apb0: apb0_clk {
+			apb0: apb0-clk {
 				compatible = "allwinner,sun8i-a23-apb0-clk";
 				#clock-cells = <0>;
 				clocks = <&ahb0>;
 				clock-output-names = "apb0";
 			};
 
-			apb0_gates: apb0_gates_clk {
+			apb0_gates: apb0-gates-clk {
 				compatible = "allwinner,sun8i-a23-apb0-gates-clk";
 				#clock-cells = <1>;
 				clocks = <&apb0>;
@@ -767,7 +767,7 @@
 						"apb0_i2c";
 			};
 
-			apb0_rst: apb0_rst {
+			apb0_rst: apb0-rst {
 				compatible = "allwinner,sun6i-a31-clock-reset";
 				#reset-cells = <1>;
 			};

diff --git a/src/arm/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts b/src/arm/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts
index d5f6aeb..0c585a6 100644
--- a/src/arm/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts
+++ b/src/arm/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts

@@ -52,7 +52,7 @@
 		ethernet0 = &esp8089;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
 		/* The esp8089 needs 200 ms after driving wifi-en high */
@@ -76,7 +76,7 @@
 	non-removable;
 	status = "okay";
 
-	esp8089: sdio_wifi@1 {
+	esp8089: wifi@1 {
 		compatible = "esp,esp8089";
 		reg = <1>;
 		esp,crystal-26M-en = <2>;

diff --git a/src/arm/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts b/src/arm/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts
index 9f9232a..63cb4e1 100644
--- a/src/arm/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts
+++ b/src/arm/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts

@@ -52,7 +52,7 @@
 		ethernet0 = &esp8089;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
 		/* The esp8089 needs 200 ms after driving wifi-en high */
@@ -69,7 +69,7 @@
 	non-removable;
 	status = "okay";
 
-	esp8089: sdio_wifi@1 {
+	esp8089: wifi@1 {
 		compatible = "esp,esp8089";
 		reg = <1>;
 		esp,crystal-26M-en = <2>;

diff --git a/src/arm/allwinner/sun8i-a33-ga10h-v1.1.dts b/src/arm/allwinner/sun8i-a33-ga10h-v1.1.dts
index 2dfdd0a..f00ce03 100644
--- a/src/arm/allwinner/sun8i-a33-ga10h-v1.1.dts
+++ b/src/arm/allwinner/sun8i-a33-ga10h-v1.1.dts

@@ -85,7 +85,7 @@
 	non-removable;
 	status = "okay";
 
-	rtl8703as: sdio_wifi@1 {
+	rtl8703as: wifi@1 {
 		reg = <1>;
 	};
 };

diff --git a/src/arm/allwinner/sun8i-a33-inet-d978-rev2.dts b/src/arm/allwinner/sun8i-a33-inet-d978-rev2.dts
index 065cb62..162ba93 100644
--- a/src/arm/allwinner/sun8i-a33-inet-d978-rev2.dts
+++ b/src/arm/allwinner/sun8i-a33-inet-d978-rev2.dts

@@ -78,7 +78,7 @@
 	non-removable;
 	status = "okay";
 
-	rtl8723bs: sdio_wifi@1 {
+	rtl8723bs: wifi@1 {
 		reg = <1>;
 	};
 };

diff --git a/src/arm/allwinner/sun8i-a33.dtsi b/src/arm/allwinner/sun8i-a33.dtsi
index 30fdd27..36b2d78 100644
--- a/src/arm/allwinner/sun8i-a33.dtsi
+++ b/src/arm/allwinner/sun8i-a33.dtsi

@@ -323,35 +323,35 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				gpu_alert0: gpu_alert0 {
+				gpu_alert0: gpu-alert0 {
 					/* milliCelsius */
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_alert1: cpu_alert1 {
+				cpu_alert1: cpu-alert1 {
 					/* milliCelsius */
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
 				};
 
-				gpu_alert1: gpu_alert1 {
+				gpu_alert1: gpu-alert1 {
 					/* milliCelsius */
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "hot";
 				};
 
-				cpu_crit: cpu_crit {
+				cpu_crit: cpu-crit {
 					/* milliCelsius */
 					temperature = <110000>;
 					hysteresis = <2000>;

diff --git a/src/arm/allwinner/sun8i-a83t-bananapi-m3.dts b/src/arm/allwinner/sun8i-a83t-bananapi-m3.dts
index 8d56b10..32e811f 100644
--- a/src/arm/allwinner/sun8i-a83t-bananapi-m3.dts
+++ b/src/arm/allwinner/sun8i-a83t-bananapi-m3.dts

@@ -95,7 +95,7 @@
 		gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&ac100_rtc 1>;
 		clock-names = "ext_clock";

diff --git a/src/arm/allwinner/sun8i-a83t-cubietruck-plus.dts b/src/arm/allwinner/sun8i-a83t-cubietruck-plus.dts
index 8709933..d5e6dda 100644
--- a/src/arm/allwinner/sun8i-a83t-cubietruck-plus.dts
+++ b/src/arm/allwinner/sun8i-a83t-cubietruck-plus.dts

@@ -144,7 +144,7 @@
 		compatible = "linux,spdif-dit";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&ac100_rtc 1>;
 		clock-names = "ext_clock";

diff --git a/src/arm/allwinner/sun8i-a83t-tbs-a711.dts b/src/arm/allwinner/sun8i-a83t-tbs-a711.dts
index a7d4ca3..43982b1 100644
--- a/src/arm/allwinner/sun8i-a83t-tbs-a711.dts
+++ b/src/arm/allwinner/sun8i-a83t-tbs-a711.dts

@@ -123,7 +123,7 @@
 		vin-supply = <&reg_vbat>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
 

diff --git a/src/arm/allwinner/sun8i-a83t.dtsi b/src/arm/allwinner/sun8i-a83t.dtsi
index 94eb3bf..addf0cb 100644
--- a/src/arm/allwinner/sun8i-a83t.dtsi
+++ b/src/arm/allwinner/sun8i-a83t.dtsi

@@ -164,7 +164,7 @@
 		ranges;
 
 		/* TODO: PRCM block has a mux for this. */
-		osc24M: osc24M_clk {
+		osc24M: osc24M-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
@@ -177,14 +177,14 @@
 		 * It is an internal RC-based oscillator.
 		 * TODO: Its controls are in the PRCM block.
 		 */
-		osc16M: osc16M_clk {
+		osc16M: osc16M-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <16000000>;
 			clock-output-names = "osc16M";
 		};
 
-		osc16Md512: osc16Md512_clk {
+		osc16Md512: osc16Md512-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clock-div = <512>;
@@ -1127,7 +1127,7 @@
 			#reset-cells = <1>;
 		};
 
-		r_cpucfg@1f01c00 {
+		cpucfg@1f01c00 {
 			compatible = "allwinner,sun8i-a83t-r-cpucfg";
 			reg = <0x1f01c00 0x400>;
 		};

diff --git a/src/arm/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts b/src/arm/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts
index d729b7c..d3a7c9f 100644
--- a/src/arm/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/src/arm/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts

@@ -103,7 +103,7 @@
 		cpu-supply = <&reg_vcc1v2>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 		clocks = <&rtc CLK_OSC32K_FANOUT>;

diff --git a/src/arm/allwinner/sun8i-h2-plus-orangepi-r1.dts b/src/arm/allwinner/sun8i-h2-plus-orangepi-r1.dts
index 3356f42..79b03b3 100644
--- a/src/arm/allwinner/sun8i-h2-plus-orangepi-r1.dts
+++ b/src/arm/allwinner/sun8i-h2-plus-orangepi-r1.dts

@@ -43,11 +43,12 @@
 /* Orange Pi R1 is based on Orange Pi Zero design */
 #include "sun8i-h2-plus-orangepi-zero.dts"
 
+/delete-node/ &reg_vcc_wifi;
+
 / {
 	model = "Xunlong Orange Pi R1";
 	compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
 
-	/delete-node/ reg_vcc_wifi;
 
 	/*
 	 * Ths pin of this regulator is the same with the Wi-Fi extra
@@ -89,7 +90,7 @@
 	vmmc-supply = <&reg_vcc3v3>;
 	vqmmc-supply = <&reg_vcc3v3>;
 
-	rtl8189etv: sdio_wifi@1 {
+	rtl8189etv: wifi@1 {
 		reg = <1>;
 	};
 };

diff --git a/src/arm/allwinner/sun8i-h2-plus-orangepi-zero.dts b/src/arm/allwinner/sun8i-h2-plus-orangepi-zero.dts
index 3706216..1b001f2 100644
--- a/src/arm/allwinner/sun8i-h2-plus-orangepi-zero.dts
+++ b/src/arm/allwinner/sun8i-h2-plus-orangepi-zero.dts

@@ -80,7 +80,7 @@
 		};
 	};
 
-	reg_vcc_wifi: reg_vcc_wifi {
+	reg_vcc_wifi: reg-vcc-wifi {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -105,7 +105,7 @@
 		states = <1100000 0>, <1300000 1>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
 		post-power-on-delay-ms = <200>;
@@ -149,7 +149,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	xr819: sdio_wifi@1 {
+	xr819: wifi@1 {
 		reg = <1>;
 	};
 };

diff --git a/src/arm/allwinner/sun8i-h3-beelink-x2.dts b/src/arm/allwinner/sun8i-h3-beelink-x2.dts
index a6d38ec..5b77300 100644
--- a/src/arm/allwinner/sun8i-h3-beelink-x2.dts
+++ b/src/arm/allwinner/sun8i-h3-beelink-x2.dts

@@ -122,7 +122,7 @@
 		compatible = "linux,spdif-dit";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 		clocks = <&rtc CLK_OSC32K_FANOUT>;
@@ -185,7 +185,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	sdiowifi: sdio_wifi@1 {
+	sdiowifi: wifi@1 {
 		reg = <1>;
 	};
 };

diff --git a/src/arm/allwinner/sun8i-h3-nanopi-duo2.dts b/src/arm/allwinner/sun8i-h3-nanopi-duo2.dts
index 343b02b..2b0566d 100644
--- a/src/arm/allwinner/sun8i-h3-nanopi-duo2.dts
+++ b/src/arm/allwinner/sun8i-h3-nanopi-duo2.dts

@@ -87,7 +87,7 @@
 		vin-supply = <&reg_vcc5v0>;
         };
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 		clocks = <&rtc CLK_OSC32K_FANOUT>;
@@ -119,7 +119,7 @@
 	non-removable;
 	status = "okay";
 
-	sdio_wifi: sdio_wifi@1 {
+	sdio_wifi: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&pio>;

diff --git a/src/arm/allwinner/sun8i-h3-nanopi-m1-plus.dts b/src/arm/allwinner/sun8i-h3-nanopi-m1-plus.dts
index 4ba533b..59bd074 100644
--- a/src/arm/allwinner/sun8i-h3-nanopi-m1-plus.dts
+++ b/src/arm/allwinner/sun8i-h3-nanopi-m1-plus.dts

@@ -62,7 +62,7 @@
 		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 	};
@@ -132,7 +132,7 @@
 	non-removable;
 	status = "okay";
 
-	sdio_wifi: sdio_wifi@1 {
+	sdio_wifi: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&pio>;

diff --git a/src/arm/allwinner/sun8i-h3-nanopi-neo-air.dts b/src/arm/allwinner/sun8i-h3-nanopi-neo-air.dts
index 9e1a33f..6d85370 100644
--- a/src/arm/allwinner/sun8i-h3-nanopi-neo-air.dts
+++ b/src/arm/allwinner/sun8i-h3-nanopi-neo-air.dts

@@ -73,7 +73,7 @@
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 	};

diff --git a/src/arm/allwinner/sun8i-h3-nanopi-r1.dts b/src/arm/allwinner/sun8i-h3-nanopi-r1.dts
index 42cd113..8706497 100644
--- a/src/arm/allwinner/sun8i-h3-nanopi-r1.dts
+++ b/src/arm/allwinner/sun8i-h3-nanopi-r1.dts

@@ -43,7 +43,7 @@
 			 <1300000 0x1>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 		clocks = <&rtc CLK_OSC32K_FANOUT>;

diff --git a/src/arm/allwinner/sun8i-h3-orangepi-2.dts b/src/arm/allwinner/sun8i-h3-orangepi-2.dts
index f1f9dbe..d2ae47b 100644
--- a/src/arm/allwinner/sun8i-h3-orangepi-2.dts
+++ b/src/arm/allwinner/sun8i-h3-orangepi-2.dts

@@ -105,7 +105,7 @@
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */
 	};
@@ -169,7 +169,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	rtl8189: sdio_wifi@1 {
+	rtl8189: wifi@1 {
 		reg = <1>;
 	};
 };

diff --git a/src/arm/allwinner/sun8i-h3-orangepi-lite.dts b/src/arm/allwinner/sun8i-h3-orangepi-lite.dts
index 305b34a..6a4316a 100644
--- a/src/arm/allwinner/sun8i-h3-orangepi-lite.dts
+++ b/src/arm/allwinner/sun8i-h3-orangepi-lite.dts

@@ -143,7 +143,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	rtl8189ftv: sdio_wifi@1 {
+	rtl8189ftv: wifi@1 {
 		reg = <1>;
 	};
 };

diff --git a/src/arm/allwinner/sun8i-h3-orangepi-pc-plus.dts b/src/arm/allwinner/sun8i-h3-orangepi-pc-plus.dts
index babf4cf..8a49b33 100644
--- a/src/arm/allwinner/sun8i-h3-orangepi-pc-plus.dts
+++ b/src/arm/allwinner/sun8i-h3-orangepi-pc-plus.dts

@@ -63,7 +63,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	rtl8189ftv: sdio_wifi@1 {
+	rtl8189ftv: wifi@1 {
 		reg = <1>;
 	};
 };

diff --git a/src/arm/allwinner/sun8i-h3-orangepi-zero-plus2.dts b/src/arm/allwinner/sun8i-h3-orangepi-zero-plus2.dts
index 561ea1d..7a6444a 100644
--- a/src/arm/allwinner/sun8i-h3-orangepi-zero-plus2.dts
+++ b/src/arm/allwinner/sun8i-h3-orangepi-zero-plus2.dts

@@ -92,7 +92,7 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
 		post-power-on-delay-ms = <200>;

diff --git a/src/arm/allwinner/sun8i-q8-common.dtsi b/src/arm/allwinner/sun8i-q8-common.dtsi
index 3d9a152..2725848 100644
--- a/src/arm/allwinner/sun8i-q8-common.dtsi
+++ b/src/arm/allwinner/sun8i-q8-common.dtsi

@@ -62,7 +62,7 @@
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		/*
 		 * Q8 boards use various PL# pins as wifi-en. On other boards
@@ -94,7 +94,7 @@
 	non-removable;
 	status = "okay";
 
-	sdio_wifi: sdio_wifi@1 {
+	sdio_wifi: wifi@1 {
 		reg = <1>;
 	};
 };

diff --git a/src/arm/allwinner/sun8i-r16-bananapi-m2m.dts b/src/arm/allwinner/sun8i-r16-bananapi-m2m.dts
index bc394686..f4bf46b 100644
--- a/src/arm/allwinner/sun8i-r16-bananapi-m2m.dts
+++ b/src/arm/allwinner/sun8i-r16-bananapi-m2m.dts

@@ -88,7 +88,7 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
 		clocks = <&rtc CLK_OSC32K_FANOUT>;

diff --git a/src/arm/allwinner/sun8i-r16-parrot.dts b/src/arm/allwinner/sun8i-r16-parrot.dts
index 95543a9..7506752 100644
--- a/src/arm/allwinner/sun8i-r16-parrot.dts
+++ b/src/arm/allwinner/sun8i-r16-parrot.dts

@@ -75,7 +75,7 @@
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
 	};

diff --git a/src/arm/allwinner/sun8i-r40-bananapi-m2-ultra.dts b/src/arm/allwinner/sun8i-r40-bananapi-m2-ultra.dts
index 28197bb..cd2351a 100644
--- a/src/arm/allwinner/sun8i-r40-bananapi-m2-ultra.dts
+++ b/src/arm/allwinner/sun8i-r40-bananapi-m2-ultra.dts

@@ -100,7 +100,7 @@
 		enable-active-high;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
 		clocks = <&ccu CLK_OUTA>;

diff --git a/src/arm/allwinner/sun8i-r40-oka40i-c.dts b/src/arm/allwinner/sun8i-r40-oka40i-c.dts
index 0bd1336..15b0b4d 100644
--- a/src/arm/allwinner/sun8i-r40-oka40i-c.dts
+++ b/src/arm/allwinner/sun8i-r40-oka40i-c.dts

@@ -62,7 +62,7 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; // PB10 WIFI_EN
 		clocks = <&ccu CLK_OUTA>;

diff --git a/src/arm/allwinner/sun8i-s3-pinecube.dts b/src/arm/allwinner/sun8i-s3-pinecube.dts
index 20966e9..e0d4404 100644
--- a/src/arm/allwinner/sun8i-s3-pinecube.dts
+++ b/src/arm/allwinner/sun8i-s3-pinecube.dts

@@ -51,7 +51,7 @@
 		startup-delay-us = <200000>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 WIFI-RST */
 		post-power-on-delay-ms = <200>;

diff --git a/src/arm/allwinner/sun8i-v3s.dtsi b/src/arm/allwinner/sun8i-v3s.dtsi
index e8a0447..9e13c2a 100644
--- a/src/arm/allwinner/sun8i-v3s.dtsi
+++ b/src/arm/allwinner/sun8i-v3s.dtsi

@@ -98,7 +98,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		osc24M: osc24M_clk {
+		osc24M: osc24M-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
@@ -106,7 +106,7 @@
 			clock-output-names = "osc24M";
 		};
 
-		osc32k: osc32k_clk {
+		osc32k: osc32k-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;

diff --git a/src/arm/allwinner/sun8i-v40-bananapi-m2-berry.dts b/src/arm/allwinner/sun8i-v40-bananapi-m2-berry.dts
index 4348710..6575ef2 100644
--- a/src/arm/allwinner/sun8i-v40-bananapi-m2-berry.dts
+++ b/src/arm/allwinner/sun8i-v40-bananapi-m2-berry.dts

@@ -94,7 +94,7 @@
 		enable-active-high;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
 		clocks = <&ccu CLK_OUTA>;

diff --git a/src/arm/allwinner/sun9i-a80.dtsi b/src/arm/allwinner/sun9i-a80.dtsi
index 7d3f330..a1ae092 100644
--- a/src/arm/allwinner/sun9i-a80.dtsi
+++ b/src/arm/allwinner/sun9i-a80.dtsi

@@ -196,14 +196,14 @@
 		 * The actual TX clock rate is not controlled by the
 		 * gmac_tx clock.
 		 */
-		mii_phy_tx_clk: mii_phy_tx_clk {
+		mii_phy_tx_clk: mii-phy-tx-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <25000000>;
 			clock-output-names = "mii_phy_tx";
 		};
 
-		gmac_int_tx_clk: gmac_int_tx_clk {
+		gmac_int_tx_clk: gmac-int-tx-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <125000000>;

diff --git a/src/arm/allwinner/sunxi-bananapi-m2-plus.dtsi b/src/arm/allwinner/sunxi-bananapi-m2-plus.dtsi
index 1d1d127..873817d 100644
--- a/src/arm/allwinner/sunxi-bananapi-m2-plus.dtsi
+++ b/src/arm/allwinner/sunxi-bananapi-m2-plus.dtsi

@@ -98,7 +98,7 @@
 		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 		clocks = <&rtc CLK_OSC32K_FANOUT>;

diff --git a/src/arm/allwinner/sunxi-h3-h5-emlid-neutis.dtsi b/src/arm/allwinner/sunxi-h3-h5-emlid-neutis.dtsi
index 60804b0..be5f552 100644
--- a/src/arm/allwinner/sunxi-h3-h5-emlid-neutis.dtsi
+++ b/src/arm/allwinner/sunxi-h3-h5-emlid-neutis.dtsi

@@ -18,7 +18,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
 		post-power-on-delay-ms = <200>;

diff --git a/src/arm/allwinner/sunxi-h3-h5.dtsi b/src/arm/allwinner/sunxi-h3-h5.dtsi
index ade1cd5..7df6051 100644
--- a/src/arm/allwinner/sunxi-h3-h5.dtsi
+++ b/src/arm/allwinner/sunxi-h3-h5.dtsi

@@ -83,7 +83,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		osc24M: osc24M_clk {
+		osc24M: osc24M-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
@@ -91,7 +91,7 @@
 			clock-output-names = "osc24M";
 		};
 
-		osc32k: osc32k_clk {
+		osc32k: osc32k-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;

diff --git a/src/arm/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/src/arm/aspeed/aspeed-bmc-ampere-mtmitchell.dts
index 7b54088..3c89250 100644
--- a/src/arm/aspeed/aspeed-bmc-ampere-mtmitchell.dts
+++ b/src/arm/aspeed/aspeed-bmc-ampere-mtmitchell.dts

@@ -813,7 +813,6 @@
 };
 
 &adc0 {
-	ref_voltage = <2500>;
 	status = "okay";
 
 	pinctrl-names = "default";

diff --git a/src/arm/aspeed/aspeed-bmc-asrock-e3c246d4i.dts b/src/arm/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
index c4b2efb..bb2e6ef 100644
--- a/src/arm/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
+++ b/src/arm/aspeed/aspeed-bmc-asrock-e3c246d4i.dts

@@ -83,6 +83,9 @@
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
 };
 
 &i2c1 {
@@ -103,6 +106,12 @@
 		compatible = "st,24c128", "atmel,24c128";
 		reg = <0x57>;
 		pagesize = <16>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		eth0_macaddress: macaddress@3f80 {
+			reg = <0x3f80 6>;
+		};
 	};
 };
 

diff --git a/src/arm/aspeed/aspeed-bmc-asrock-e3c256d4i.dts b/src/arm/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
new file mode 100644
index 0000000..9d00ce9
--- /dev/null
+++ b/src/arm/aspeed/aspeed-bmc-asrock-e3c256d4i.dts

@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/watchdog/aspeed-wdt.h>
+
+/{
+	model = "ASRock E3C256D4I BMC";
+	compatible = "asrock,e3c256d4i-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+
+		i2c20 = &i2c2mux0ch0;
+		i2c21 = &i2c2mux0ch1;
+		i2c22 = &i2c2mux0ch2;
+		i2c23 = &i2c2mux0ch3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC heartbeat */
+		led-0 {
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "timer";
+		};
+
+		/* system fault */
+		led-1 {
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_RED>;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <100000000>; /* 100 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c2mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c2mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c2mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c2mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	vrm@60 {
+		compatible = "isil,isl69269";
+		reg = <0x60>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	/* FRU eeprom */
+	eeprom@57 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <16>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		eth0_macaddress: macaddress@3f80 {
+			reg = <0x3f80 6>;
+		};
+	};
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&wdt1 {
+	aspeed,reset-mask = <(AST2500_WDT_RESET_DEFAULT & ~AST2500_WDT_RESET_LPC)>;
+};
+
+&wdt2 {
+	aspeed,reset-mask = <(AST2500_WDT_RESET_DEFAULT & ~AST2500_WDT_RESET_LPC)>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default /* CPU */
+		&pinctrl_pwm2_default      /* rear */
+		&pinctrl_pwm4_default>;    /* front */
+
+	/* CPU */
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	/* rear */
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	/* front */
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "", "", "NMI_BTN_N", "BMC_NMI", "", "", "", "",
+		/*  B */ "", "", "", "", "", "", "", "",
+		/*  C */ "", "", "", "", "", "", "", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "LOCATORLED_STATUS_N", "LOCATORBTN", "", "",
+			"", "", "BMC_PCH_SCI_LPC", "BMC_NCSI_MUX_CTL",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"", "", "", "",
+		/*  H */ "FM_ME_RCVR_N", "O_PWROK", "", "D4_DIMM_EVENT_3V_N",
+			"MFG_MODE_N", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "BMC_SMI", "", "", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "", "", "", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "", "", "", "", "",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "PCHHOT_BMC_N", "", "RSMRST", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S5", "", "", "", "", "", "",
+		/*  Z */ "CPU_CATERR_BMC_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "CPU1_THERMTRIP_LATCH_N", "", "CPU1_PROCHOT_N", "",
+			"", "", "IRQ_SMI_ACTIVE_N", "FM_BIOS_POST_CMPLT_N",
+		/* AB */ "", "", "ME_OVERRIDE", "BMC_DMI_MODIFY", "", "", "", "",
+		/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */
+		&pinctrl_adc1_default	   /* 5VSB */
+		&pinctrl_adc2_default	   /* CPU1 */
+		&pinctrl_adc3_default	   /* VCCSA */
+		&pinctrl_adc4_default	   /* VCCM */
+		&pinctrl_adc5_default	   /* V10M */
+		&pinctrl_adc6_default	   /* VCCIO */
+		&pinctrl_adc7_default	   /* VCCGT */
+		&pinctrl_adc8_default	   /* VPPM */
+		&pinctrl_adc9_default	   /* BAT */
+		&pinctrl_adc10_default	   /* 3V */
+		&pinctrl_adc11_default	   /* 5V */
+		&pinctrl_adc12_default	   /* 12V */
+		&pinctrl_adc13_default	   /* GND */
+		&pinctrl_adc14_default	   /* GND */
+		&pinctrl_adc15_default>;   /* GND */
+};

diff --git a/src/arm/aspeed/aspeed-bmc-asrock-romed8hm3.dts b/src/arm/aspeed/aspeed-bmc-asrock-romed8hm3.dts
index 4554abf..6dd2216 100644
--- a/src/arm/aspeed/aspeed-bmc-asrock-romed8hm3.dts
+++ b/src/arm/aspeed/aspeed-bmc-asrock-romed8hm3.dts

@@ -71,6 +71,9 @@
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
 };
 
 &i2c0 {
@@ -98,14 +101,14 @@
 
 	/* IPB PMIC */
 	lm25066@40 {
-		compatible = "lm25066";
+		compatible = "ti,lm25066";
 		reg = <0x40>;
 		shunt-resistor-micro-ohms = <1000>;
 	};
 
 	/* 12VSB PMIC */
 	lm25066@41 {
-		compatible = "lm25066";
+		compatible = "ti,lm25066";
 		reg = <0x41>;
 		shunt-resistor-micro-ohms = <10000>;
 	};
@@ -131,6 +134,12 @@
 		compatible = "st,24c128", "atmel,24c128";
 		reg = <0x50>;
 		pagesize = <16>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		eth0_macaddress: macaddress@3f80 {
+			reg = <0x3f80 6>;
+		};
 	};
 };
 

diff --git a/src/arm/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts b/src/arm/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
new file mode 100644
index 0000000..5554858
--- /dev/null
+++ b/src/arm/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts

@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/{
+	model = "ASRock SPC621D8HM3 BMC";
+	compatible = "asrock,spc621d8hm3-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+
+		i2c20 = &i2c1mux0ch0;
+		i2c21 = &i2c1mux0ch1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC heartbeat */
+		led-0 {
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "timer";
+		};
+
+		/* system fault */
+		led-1 {
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_RED>;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>; /* 50 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* hardware monitor/thermal sensor */
+	temperature-sensor@29 {
+		compatible = "nuvoton,nct7802";
+		reg = <0x29>;
+	};
+
+	/* motherboard temp sensor (TMP1, near BMC) */
+	temperature-sensor@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+
+	/* motherboard FRU eeprom */
+	eeprom@50 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <16>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		eth0_macaddress: macaddress@3f80 {
+			reg = <0x3f80 6>;
+		};
+	};
+
+	/* M.2 slot smbus mux */
+	i2c-mux@71 {
+		compatible = "nxp,pca9545";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c1mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c1mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		&pinctrl_pwm2_default
+		&pinctrl_pwm3_default
+		&pinctrl_pwm4_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "LOCATORLED_STATUS_N", "LOCATORBTN_N",
+			"BMC_READY_N", "FM_SPD_DDRCPU_LVLSHFT_EN",
+			"", "", "", "",
+		/*  B */ "NODE_ID_1", "NODE_ID_2", "PSU_FAN_FAIL_N", "",
+			"", "", "", "GPIO_RST",
+		/*  C */ "", "", "", "", "", "", "", "",
+		/*  D */ "FP_PWR_BTN_MUX_N", "FM_BMC_PWRBTN_OUT_N",
+			"FP_RST_BTN_N", "RST_BMC_RSTBTN_OUT_N",
+			"NMI_BTN_N", "BMC_NMI",
+			"", "",
+		/*  E */ "", "", "", "FM_ME_RCVR_N", "", "", "", "",
+		/*  F */ "BMC_SMB_SEL_N", "FM_CPU2_DISABLE_COD_N",
+			"FM_REMOTE_DEBUG_BMC_EN", "FM_CPU_ERR0_LVT3_EN",
+			"FM_CPU_ERR1_LVT3_EN", "FM_CPU_ERR2_LVT3_EN",
+			"FM_MEM_THERM_EVENT_CPU1_LVT3_N", "FM_MEM_THERM_EVENT_CPU2_LVT3_N",
+		/*  G */ "HWM_BAT_EN", "", "BMC_PHYRST_N", "FM_BIOS_SPI_BMC_CTRL",
+			"BMC_ALERT1_N", "BMC_ALERT2_N", "BMC_ALERT3_N", "IRQ_SML0_ALERT_N",
+		/*  H */ "BMC_SMB_PRESENT_1_N", "FM_PCH_CORE_VID_0", "FM_PCH_CORE_VID_1", "",
+			"FM_MFG_MODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "IRQ_PVDDQ_ABCD_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_ABCD_CPU2_VRHOT_LVC3_N",
+			"IRQ_PVDDQ_EFGH_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_EFGH_CPU2_VRHOT_LVC3_N",
+			"", "", "", "",
+		/*  J */ "", "", "", "", "", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "FM_PVCCIN_CPU1_PWR_IN_ALERT_N", "FM_PVCCIN_CPU2_PWR_IN_ALERT_N",
+			"IRQ_PVCCIN_CPU1_VRHOT_LVC3_N", "IRQ_PVCCIN_CPU2_VRHOT_LVC3_N",
+			"FM_CPU1_PROCHOT_BMC_LVC3_N", "",
+			"FM_CPU1_MEMHOT_OUT_N", "FM_CPU2_MEMHOT_OUT_N",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "", "", "", "RST_GLB_RST_WARN_N", "PCIE_WAKE_N",
+		/*  R */ "", "", "FM_BMC_SUSACK_N", "FM_BMC_EUP_LOT6_N",
+			"", "FM_BMC_PCH_SCI_LPC_N", "", "",
+		/*  S */ "FM_DBP_PRESENT_N", "FM_CPU2_SKTOCC_LCT3_N",
+			"FM_CPU1_FIVR_FAULT_LVT3", "FM_CPU2_FIVR_FAULT_LVT3",
+			 "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "FM_SLPS3_N", "FM_SLPS4_N", "", "FM_BMC_ONCTL_N_PLD",
+			"", "", "", "",
+		/*  Z */ "FM_CPU_MSMI_CATERR_LVT3_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "FM_CPU1_THERMTRIP_LATCH_LVT3_N", "FM_CPU2_THERMTRIP_LATCH_LVT3_N",
+			"FM_BIOS_POST_COMPLT_N", "DBP_BMC_SYSPWROK",
+			"", "IRQ_SML0_ALERT_MUX_N",
+			"IRQ_SMI_ACTIVE_N", "IRQ_NMI_EVENT_N",
+		/* AB */ "FM_PCH_BMC_THERMTRIP_N", "PWRGD_SYS_PWROK",
+			"ME_OVERRIDE", "IRQ_BMC_PCH_SMI_LPC_N",
+			"", "", "", "",
+		/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */
+		&pinctrl_adc1_default	   /* 5VSB */
+		&pinctrl_adc2_default	   /* CPU1 */
+		&pinctrl_adc3_default	   /* NC */
+		&pinctrl_adc4_default	   /* VCCMABCD */
+		&pinctrl_adc5_default	   /* VCCMEFGH */
+		&pinctrl_adc6_default	   /* NC */
+		&pinctrl_adc7_default	   /* NC */
+		&pinctrl_adc8_default	   /* PVNN_PCH */
+		&pinctrl_adc9_default	   /* 1P05PCH */
+		&pinctrl_adc10_default	   /* 1P8PCH */
+		&pinctrl_adc11_default	   /* BAT */
+		&pinctrl_adc12_default	   /* 3V */
+		&pinctrl_adc13_default	   /* 5V */
+		&pinctrl_adc14_default	   /* 12V */
+		&pinctrl_adc15_default>;   /* GND */
+};

diff --git a/src/arm/aspeed/aspeed-bmc-asrock-x570d4u.dts b/src/arm/aspeed/aspeed-bmc-asrock-x570d4u.dts
new file mode 100644
index 0000000..8dee4fa
--- /dev/null
+++ b/src/arm/aspeed/aspeed-bmc-asrock-x570d4u.dts

@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Asrock Rack X570D4U BMC";
+	compatible = "asrock,x570d4u-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c40 = &i2c4mux0ch0;
+		i2c41 = &i2c4mux0ch1;
+		i2c42 = &i2c4mux0ch2;
+		i2c43 = &i2c4mux0ch3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pci_memory: region@9a000000 {
+			no-map;
+			reg = <0x9a000000 0x00010000>; /* 64K */
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02800000>;	/* 40M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/* led-heartbeat-n */
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "timer";
+		};
+
+		led-1 {
+			/* led-fault-n */
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_FAULT;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*  A */ "input-locatorled-n", "", "", "", "", "", "", "",
+	/*  B */ "input-bios-post-cmplt-n", "", "", "", "", "", "", "",
+	/*  C */ "", "", "", "", "", "", "control-locatorbutton-n", "",
+	/*  D */ "button-power-n", "control-power-n", "button-reset-n",
+		 "control-reset-n", "", "", "", "",
+	/*  E */ "", "", "", "", "", "", "", "",
+	/*  F */ "", "", "", "", "", "", "", "",
+	/*  G */ "output-hwm-vbat-enable", "input-id0-n", "input-id1-n",
+		 "input-id2-n", "input-aux-smb-alert-n", "",
+		 "input-psu-smb-alert-n", "",
+	/*  H */ "", "", "", "", "input-mfg-mode-n", "",
+		 "led-heartbeat-n", "input-case-open-n",
+	/*  I */ "", "", "", "", "", "", "", "",
+	/*  J */ "output-bmc-ready-n", "", "", "", "", "", "", "",
+	/*  K */ "", "", "", "", "", "", "", "",
+	/*  L */ "", "", "", "", "", "", "", "",
+	/*  M */ "", "", "", "", "", "", "", "",
+	/*  N */ "", "", "", "", "", "", "", "",
+	/*  O */ "", "", "", "", "", "", "", "",
+	/*  P */ "", "", "", "", "", "", "", "",
+	/*  Q */ "", "", "", "", "input-bmc-smb-present-n", "", "",
+		 "input-pcie-wake-n",
+	/*  R */ "", "", "", "", "", "", "", "",
+	/*  S */ "input-bmc-pchhot-n", "", "", "", "", "", "", "",
+	/*  T */ "", "", "", "", "", "", "", "",
+	/*  U */ "", "", "", "", "", "", "", "",
+	/*  V */ "", "", "", "", "", "", "", "",
+	/*  W */ "", "", "", "", "", "", "", "",
+	/*  X */ "", "", "", "", "", "", "", "",
+	/*  Y */ "input-sleep-s3-n", "input-sleep-s5-n", "", "", "", "",
+		 "", "",
+	/*  Z */ "", "", "led-fault-n", "output-bmc-throttle-n", "", "",
+		 "", "",
+	/* AA */ "input-cpu1-thermtrip-latch-n", "",
+		 "input-cpu1-prochot-n", "", "", "", "", "",
+	/* AB */ "", "input-power-good", "", "", "", "", "", "",
+	/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <10000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default &pinctrl_mdio2_default>;
+	use-ncsi;
+
+	nvmem-cells = <&eth1_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	/* SMBus on auxiliary panel header (AUX_PANEL1) */
+	status = "okay";
+};
+
+&i2c1 {
+	/* Hardware monitoring SMBus */
+	status = "okay";
+
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	/* PSU SMBus (PSU_SMB1) */
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c4mux0ch0: i2c@0 {
+			/* SMBus on PCI express 16x slot */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c4mux0ch1: i2c@1 {
+			/* SMBus on PCI express 8x slot */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c4mux0ch2: i2c@2 {
+			/* Unknown */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c4mux0ch3: i2c@3 {
+			/* SMBus on PCI express 1x slot */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c5 {
+	/* SMBus on BMC connector (BMC_SMB_1) */
+	status = "okay";
+};
+
+&i2c7 {
+	/* FRU and SPD EEPROM SMBus */
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <16>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		eth0_macaddress: macaddress@3f80 {
+			reg = <0x3f80 6>;
+		};
+
+		eth1_macaddress: macaddress@3f88 {
+			reg = <0x3f88 6>;
+		};
+	};
+};
+
+&i2c8 {
+	/* SMBus on intelligent platform management bus header (IPMB_1) */
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&pci_memory>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+				&pinctrl_pwm1_default
+				&pinctrl_pwm2_default
+				&pinctrl_pwm3_default
+				&pinctrl_pwm4_default
+				&pinctrl_pwm5_default>;
+
+	fan@0 {
+		/* FAN1 (4-pin) */
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		/* FAN2 (4-pin) */
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		/* FAN3 (4-pin) */
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		/* FAN4 (6-pin) */
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0b>;
+	};
+
+	fan@4 {
+		/* FAN6 (6-pin) */
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0d>;
+	};
+
+	fan@5 {
+		/* FAN5 (6-pin) */
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0c>;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default       /* 3VSB */
+			&pinctrl_adc1_default    /* 5VSB */
+			&pinctrl_adc2_default    /* VCPU */
+			&pinctrl_adc3_default    /* VSOC */
+			&pinctrl_adc4_default    /* VCCM */
+			&pinctrl_adc5_default    /* APU-VDDP */
+			&pinctrl_adc6_default    /* PM-VDD-CLDO */
+			&pinctrl_adc7_default    /* PM-VDDCR-S5 */
+			&pinctrl_adc8_default    /* PM-VDDCR */
+			&pinctrl_adc9_default    /* VBAT */
+			&pinctrl_adc10_default   /* 3V */
+			&pinctrl_adc11_default   /* 5V */
+			&pinctrl_adc12_default>; /* 12V */
+};

diff --git a/src/arm/aspeed/aspeed-bmc-asus-x4tf.dts b/src/arm/aspeed/aspeed-bmc-asus-x4tf.dts
new file mode 100644
index 0000000..64f4ed0
--- /dev/null
+++ b/src/arm/aspeed/aspeed-bmc-asus-x4tf.dts

@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 ASUS Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include "aspeed-g6-pinctrl.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "ASUS-X4TF";
+	compatible = "asus,x4tf-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial4:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+				<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-heartbeat {
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-uid {
+			gpios = <&gpio0 ASPEED_GPIO(P, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+			default-state = "off";
+		};
+
+		led-status_Y {
+			gpios = <&gpio1 ASPEED_GPIO(B, 1) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-sys_boot_status {
+			gpios = <&gpio1 ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&lpc_snoop {
+	snoop-ports = <0x80>;
+	status = "okay";
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rmii";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rmii";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "bios";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	pca9555_4_20: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_4_22: gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_4_24: gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*A0 - A3 0*/	"", "STRAP_BMC_BATTERY_GPIO1", "", "",
+		/*A4 - A7 4*/	"", "", "", "",
+		/*B0 - B7 8*/	"", "", "", "", "", "", "", "";
+	};
+
+	pca9555_4_26: gpio@26 {
+		compatible = "nxp,pca9555";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_4: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	pca9555_5_24: gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	i2c-mux@70  {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70 >;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_5: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			pca9555_5_5_20: gpio@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"", "", "", "", "", "", "", "",
+					"", "", "SYS_FAN6", "SYS_FAN5",
+					"SYS_FAN4", "SYS_FAN3",
+					"SYS_FAN2", "SYS_FAN1";
+			};
+
+			pca9555_5_5_21: gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina219";
+				reg = <0x44>;
+				shunt-resistor = <2>;
+			};
+		};
+
+		channel_6: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_7: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_8: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	pca9555_6_27: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_6_20: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*A0 0*/	"", "", "", "", "", "", "", "",
+		/*B0 8*/	"Drive_NVMe1", "Drive_NVMe2", "", "",
+		/*B4 12*/	"", "", "", "";
+	};
+
+	pca9555_6_21: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		idle-state = <1>;
+
+		channel_9: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina219";
+				reg = <0x40>;
+				shunt-resistor = <2>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina219";
+				reg = <0x41>;
+				shunt-resistor = <5>;
+			};
+		};
+
+		channel_10: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_11: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_12: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		channel_13: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_14: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_15: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_16: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		channel_17: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_18: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina219";
+				reg = <0x41>;
+				shunt-resistor = <5>;
+			};
+		};
+
+		channel_19: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_20: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+	multi-master;
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c08";
+		reg = <0x51>;
+	};
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&sdc {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs1 {
+	aspeed,lpc-io-reg = <0xca0>;
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8>;
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0 0*/	"", "", "", "", "", "", "", "",
+	/*B0 8*/	"", "", "", "", "", "", "PS_PWROK", "",
+	/*C0 16*/	"", "", "", "", "", "", "", "",
+	/*D0 24*/	"", "", "", "", "", "", "", "",
+	/*E0 32*/	"", "", "", "", "", "", "", "",
+	/*F0 40*/	"", "", "", "", "", "", "", "",
+	/*G0 48*/	"", "", "", "", "", "", "", "",
+	/*H0 56*/	"", "", "", "", "", "", "", "",
+	/*I0 64*/	"", "", "", "", "", "", "", "",
+	/*J0 72*/	"", "", "", "", "", "", "", "",
+	/*K0 80*/	"", "", "", "", "", "", "", "",
+	/*L0 88*/	"", "", "", "", "", "", "", "",
+	/*M0 96*/	"", "", "", "", "", "", "", "",
+	/*N0 104*/	"", "", "", "",
+	/*N4 108*/	"POST_COMPLETE", "ESR1_GPIO_AST_SPISEL", "", "",
+	/*O0 112*/	"", "", "", "", "", "", "", "",
+	/*P0 120*/	"ID_BUTTON", "ID_OUT", "POWER_BUTTON", "POWER_OUT",
+	/*P4 124*/	"RESET_BUTTON", "RESET_OUT", "", "HEARTBEAT",
+	/*Q0 128*/	"", "", "", "", "", "", "", "",
+	/*R0 136*/	"", "", "", "", "", "", "", "",
+	/*S0 144*/	"", "", "", "", "", "", "", "",
+	/*T0 152*/	"", "", "", "", "", "", "", "",
+	/*U0 160*/	"", "", "", "", "", "", "", "",
+	/*V0 168*/	"", "", "", "", "", "", "", "",
+	/*W0 176*/	"", "", "", "", "", "", "", "",
+	/*X0 184*/	"", "", "", "", "", "", "", "",
+	/*Y0 192*/	"", "", "", "", "", "", "", "",
+	/*Z0 200*/	"", "", "", "", "", "", "", "";
+};

diff --git a/src/arm/aspeed/aspeed-bmc-delta-ahe50dc.dts b/src/arm/aspeed/aspeed-bmc-delta-ahe50dc.dts
index 6600f7e..b6bfdae 100644
--- a/src/arm/aspeed/aspeed-bmc-delta-ahe50dc.dts
+++ b/src/arm/aspeed/aspeed-bmc-delta-ahe50dc.dts

@@ -14,11 +14,11 @@
 
 #define EFUSE(hexaddr, num)							\
 	efuse@##hexaddr {							\
-		compatible = "lm25066";						\
+		compatible = "ti,lm25066";					\
 		reg = <0x##hexaddr>;						\
 		shunt-resistor-micro-ohms = <675>;				\
 		regulators {							\
-			efuse##num: vout0 {					\
+			efuse##num: vout {					\
 				regulator-name = __stringify(efuse##num##-reg);	\
 			};							\
 		};								\

diff --git a/src/arm/aspeed/aspeed-bmc-facebook-cloudripper.dts b/src/arm/aspeed/aspeed-bmc-facebook-cloudripper.dts
deleted file mode 100644
index d49328f..0000000
--- a/src/arm/aspeed/aspeed-bmc-facebook-cloudripper.dts
+++ /dev/null

@@ -1,544 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2020 Facebook Inc.
-
-/dts-v1/;
-
-#include <dt-bindings/leds/common.h>
-#include "ast2600-facebook-netbmc-common.dtsi"
-
-/ {
-	model = "Facebook Cloudripper BMC";
-	compatible = "facebook,cloudripper-bmc", "aspeed,ast2600";
-
-	aliases {
-		/*
-		 * PCA9548 (1-0070) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c16 = &imux16;
-		i2c17 = &imux17;
-		i2c18 = &imux18;
-		i2c19 = &imux19;
-		i2c20 = &imux20;
-		i2c21 = &imux21;
-		i2c22 = &imux22;
-		i2c23 = &imux23;
-
-		/*
-		 * PCA9548 (2-0070) provides 8 channels connecting to
-		 * SCM (System Controller Module).
-		 */
-		i2c24 = &imux24;
-		i2c25 = &imux25;
-		i2c26 = &imux26;
-		i2c27 = &imux27;
-		i2c28 = &imux28;
-		i2c29 = &imux29;
-		i2c30 = &imux30;
-		i2c31 = &imux31;
-
-		/*
-		 * PCA9548 (3-0070) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c32 = &imux32;
-		i2c33 = &imux33;
-		i2c34 = &imux34;
-		i2c35 = &imux35;
-		i2c36 = &imux36;
-		i2c37 = &imux37;
-		i2c38 = &imux38;
-		i2c39 = &imux39;
-
-		/*
-		 * PCA9548 (8-0070) provides 8 channels connecting to
-		 * PDB (Power Delivery Board).
-		 */
-		i2c40 = &imux40;
-		i2c41 = &imux41;
-		i2c42 = &imux42;
-		i2c43 = &imux43;
-		i2c44 = &imux44;
-		i2c45 = &imux45;
-		i2c46 = &imux46;
-		i2c47 = &imux47;
-
-		/*
-		 * PCA9548 (15-0076) provides 8 channels connecting to
-		 * FCM (Fan Controller Module).
-		 */
-		i2c48 = &imux48;
-		i2c49 = &imux49;
-		i2c50 = &imux50;
-		i2c51 = &imux51;
-		i2c52 = &imux52;
-		i2c53 = &imux53;
-		i2c54 = &imux54;
-		i2c55 = &imux55;
-	};
-
-	spi_gpio: spi {
-		num-chipselects = <2>;
-		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
-			   <&gpio0 ASPEED_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
-
-		eeprom@1 {
-			compatible = "atmel,at93c46d";
-			spi-max-frequency = <250000>;
-			data-size = <16>;
-			spi-cs-high;
-			reg = <1>;
-		};
-	};
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-/*
- * "mdio1" is connected to the MDC/MDIO interface of the on-board
- * management switch (whose ports are connected to BMC, Host and front
- * panel ethernet port).
- */
-&mdio1 {
-	status = "okay";
-};
-
-&mdio3 {
-	status = "okay";
-
-	ethphy1: ethernet-phy@13 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0x0d>;
-	};
-};
-
-&mac3 {
-	status = "okay";
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii4_default>;
-};
-
-&i2c0 {
-	multi-master;
-	bus-frequency = <1000000>;
-};
-
-&i2c1 {
-	/*
-	 * PCA9548 (1-0070) provides 8 channels connecting to SMB (Switch
-	 * Main Board).
-	 */
-	i2c-mux@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux16: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux17: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux18: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux19: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux20: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux21: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux22: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux23: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c2 {
-	/*
-	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
-	 * Controller Module).
-	 */
-	i2c-mux@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux24: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux25: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux26: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux27: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux28: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux29: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux30: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux31: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c3 {
-	/*
-	 * PCA9548 (3-0070) provides 8 channels connecting to SMB (Switch
-	 * Main Board).
-	 */
-	i2c-mux@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux32: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux33: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux34: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux35: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux36: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux37: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux38: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux39: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c6 {
-	lp5012@14 {
-		compatible = "ti,lp5012";
-		reg = <0x14>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		multi-led@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			color = <LED_COLOR_ID_MULTI>;
-			function = LED_FUNCTION_ACTIVITY;
-			label = "sys";
-
-			led@0 {
-				reg = <0>;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@1 {
-				reg = <1>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@2 {
-				reg = <2>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-		};
-
-		multi-led@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			color = <LED_COLOR_ID_MULTI>;
-			function = LED_FUNCTION_ACTIVITY;
-			label = "fan";
-
-			led@0 {
-				reg = <0>;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@1 {
-				reg = <1>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@2 {
-				reg = <2>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-		};
-
-		multi-led@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			color = <LED_COLOR_ID_MULTI>;
-			function = LED_FUNCTION_ACTIVITY;
-			label = "psu";
-
-			led@0 {
-				reg = <0>;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@1 {
-				reg = <1>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@2 {
-				reg = <2>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-		};
-
-		multi-led@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-			color = <LED_COLOR_ID_MULTI>;
-			function = LED_FUNCTION_ACTIVITY;
-			label = "scm";
-
-			led@0 {
-				reg = <0>;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@1 {
-				reg = <1>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@2 {
-				reg = <2>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-		};
-	};
-};
-
-&i2c8 {
-	/*
-	 * PCA9548 (8-0070) provides 8 channels connecting to PDB (Power
-	 * Delivery Board).
-	 */
-	i2c-mux@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux40: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux41: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux42: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux43: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux44: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux45: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux46: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux47: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-
-	};
-};
-
-&i2c15 {
-	/*
-	 * PCA9548 (15-0076) provides 8 channels connecting to FCM (Fan
-	 * Controller Module).
-	 */
-	i2c-mux@76 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x76>;
-		i2c-mux-idle-disconnect;
-
-		imux48: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux49: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux50: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux51: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux52: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux53: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux54: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux55: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};

diff --git a/src/arm/aspeed/aspeed-bmc-facebook-greatlakes.dts b/src/arm/aspeed/aspeed-bmc-facebook-greatlakes.dts
index 7a53f54..998598c 100644
--- a/src/arm/aspeed/aspeed-bmc-facebook-greatlakes.dts
+++ b/src/arm/aspeed/aspeed-bmc-facebook-greatlakes.dts

@@ -66,7 +66,7 @@
 	pinctrl-0 = <&pinctrl_rmii4_default>;
 	no-hw-checksum;
 	use-ncsi;
-	mlx,multi-host;
+	mellanox,multi-host;
 	ncsi-ctrl,start-redo-probe;
 	ncsi-ctrl,no-channel-monitor;
 	ncsi-package = <1>;
@@ -211,7 +211,6 @@
 };
 
 &adc0 {
-	ref_voltage = <2500>;
 	status = "okay";
 	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
 			&pinctrl_adc2_default &pinctrl_adc3_default
@@ -220,7 +219,6 @@
 };
 
 &adc1 {
-	ref_voltage = <2500>;
 	status = "okay";
 	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc10_default
 			&pinctrl_adc11_default &pinctrl_adc12_default

diff --git a/src/arm/aspeed/aspeed-bmc-facebook-harma.dts b/src/arm/aspeed/aspeed-bmc-facebook-harma.dts
new file mode 100644
index 0000000..c118d47
--- /dev/null
+++ b/src/arm/aspeed/aspeed-bmc-facebook-harma.dts

@@ -0,0 +1,648 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Harma";
+	compatible = "facebook,harma-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart4;
+		serial4 = &uart5;
+
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		spi1 = &spi_gpio;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 124 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	spi_gpio: spi-gpio {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		tpmdev@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+// HOST BIOS Debug
+&uart1 {
+	status = "okay";
+};
+
+// SOL Host Console
+&uart2 {
+	status = "okay";
+	pinctrl-0 = <>;
+};
+
+// SOL BMC Console
+&uart4 {
+	status = "okay";
+	pinctrl-0 = <>;
+};
+
+// BMC Debug Console
+&uart5 {
+	status = "okay";
+};
+
+// MTIA
+&uart6 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+	mellanox,multi-host;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+// BIOS Flash
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <12000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	pwm@5e{
+		compatible = "max31790";
+		reg = <0x5e>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	// MB NIC FRU
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	pwm@5e{
+		compatible = "max31790";
+		reg = <0x5e>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux20: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			//Retimer Flash
+			eeprom@50 {
+				compatible = "atmel,24c2048";
+				reg = <0x50>;
+				pagesize = <128>;
+			};
+		};
+		imux21: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			retimer@24 {
+				compatible = "asteralabs,pt5161l";
+				reg = <0x24>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	// PDB FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	power-monitor@69 {
+		compatible = "pmbus";
+		reg = <0x69>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	power-monitor@22 {
+		compatible = "lltc,ltc4286";
+		reg = <0x22>;
+		adi,vrange-low-enable;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux22: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		imux23: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	gpio@30 {
+		compatible = "nxp,pca9555";
+		reg = <0x30>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+	gpio@31 {
+		compatible = "nxp,pca9555";
+		reg = <0x31>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"","","","",
+		"","","presence-cmm","",
+		"","","","",
+		"","","","";
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+	// PTTV FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+	retimer@24 {
+		compatible = "asteralabs,pt5161l";
+		reg = <0x24>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux28: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		imux29: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			//MB FRU
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+		};
+		imux30: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		imux31: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+// To Debug card
+&i2c14 {
+	status = "okay";
+	multi-master;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	// SCM FRU
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// BSM FRU
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","",
+			"bmc-spi-mux-select-0","led-identify","","",
+	/*C0-C7*/	"reset-cause-platrst","","","","",
+			"cpu0-err-alert","","",
+	/*D0-D7*/	"","","sol-uart-select","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","",
+			"leakage-detect-alert","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"led-postcode-0","led-postcode-1",
+			"led-postcode-2","led-postcode-3",
+			"led-postcode-4","led-postcode-5",
+			"led-postcode-6","led-postcode-7",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"power-button","power-host-control",
+			"reset-button","","led-power","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","led-identify-gate","",
+	/*V0-V7*/	"","","","",
+			"rtc-battery-voltage-read-enable","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","presence-post-card","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/ "ac-power-button","","","","","","","",
+	/*18B0-18B7*/ "","","","","","","","",
+	/*18C0-18C7*/ "","","","","","","","",
+	/*18D0-18D7*/ "","","","","","","","",
+	/*18E0-18E3*/ "","","","","","","","";
+};
+
+&sgpiom0 {
+	status = "okay";
+	max-ngpios = <128>;
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*in - out - in - out */
+	/*A0-A3 line 0-7*/
+	"presence-scm-cable","power-config-disable-e1s-0",
+	"","",
+	"","power-config-disable-e1s-1",
+	"","",
+	/*A4-A7 line 8-15*/
+	"","power-config-asic-module-enable",
+	"","power-config-asic-power-good",
+	"","power-config-pdb-power-good",
+	"presence-cpu","smi-control-n",
+	/*B0-B3 line 16-23*/
+	"","nmi-control-n",
+	"","nmi-control-sync-flood-n",
+	"","",
+	"","",
+	/*B4-B7 line 24-31*/
+	"","FM_CPU_SP5R1",
+	"reset-cause-rsmrst","FM_CPU_SP5R2",
+	"","FM_CPU_SP5R3",
+	"","FM_CPU_SP5R4",
+	/*C0-C3 line 32-39*/
+	"","FM_CPU0_SA0",
+	"","FM_CPU0_SA1",
+	"","rt-cpu0-p0-enable",
+	"","rt-cpu0-p1-enable",
+	/*C4-C7 line 40-47*/
+	"","smb-rt-rom-p0-select",
+	"","smb-rt-rom-p1-select",
+	"","i3c-cpu-mux0-oe-n",
+	"","i3c-cpu-mux0-select",
+	/*D0-D3 line 48-55*/
+	"","i3c-cpu-mux1-oe-n",
+	"","i3c-cpu-mux1-select",
+	"","reset-control-bmc",
+	"","reset-control-cpu0-p0-mux",
+	/*D4-D7 line 56-63*/
+	"","reset-control-cpu0-p1-mux",
+	"","reset-control-e1s-mux",
+	"power-host-good","reset-control-mb-mux",
+	"host0-ready","reset-control-smb-e1s-0",
+	/*E0-E3 line 64-71*/
+	"","reset-control-smb-e1s-1",
+	"post-end-n","reset-control-srst",
+	"presence-e1s-0","reset-control-usb-hub",
+	"","reset-control",
+	/*E4-E7 line 72-79*/
+	"presence-e1s-1","reset-control-cpu-kbrst",
+	"","reset-control-platrst",
+	"","bmc-jtag-mux-select-0",
+	"","bmc-jtag-mux-select-1",
+	/*F0-F3 line 80-87*/
+	"","bmc-jtag-select",
+	"","bmc-ready-n",
+	"","bmc-ready-sgpio",
+	"","rt-cpu0-p0-force-enable",
+	/*F4-F7 line 88-95*/
+	"presence-asic-modules-0","rt-cpu0-p1-force-enable",
+	"presence-asic-modules-1","bios-debug-msg-disable",
+	"","uart-control-buffer-select",
+	"","ac-control-n",
+	/*G0-G3 line 96-103*/
+	"FM_CPU_CORETYPE2","",
+	"FM_CPU_CORETYPE1","",
+	"FM_CPU_CORETYPE0","",
+	"FM_BOARD_REV_ID5","",
+	/*G4-G7 line 104-111*/
+	"FM_BOARD_REV_ID4","",
+	"FM_BOARD_REV_ID3","",
+	"FM_BOARD_REV_ID2","",
+	"FM_BOARD_REV_ID1","",
+	/*H0-H3 line 112-119*/
+	"FM_BOARD_REV_ID0","",
+	"","","","","","",
+	/*H4-H7 line 120-127*/
+	"","",
+	"reset-control-pcie-expansion-3","",
+	"reset-control-pcie-expansion-2","",
+	"reset-control-pcie-expansion-1","",
+	/*I0-I3 line 128-135*/
+	"reset-control-pcie-expansion-0","",
+	"FM_EXP_SLOT_ID1","",
+	"FM_EXP_SLOT_ID0","",
+	"","",
+	/*I4-I7 line 136-143*/
+	"","","","","","","","",
+	/*J0-J3 line 144-151*/
+	"","","","","","","","",
+	/*J4-J7 line 152-159*/
+	"SLOT_ID_BCB_0","",
+	"SLOT_ID_BCB_1","",
+	"SLOT_ID_BCB_2","",
+	"SLOT_ID_BCB_3","",
+	/*K0-K3 line 160-167*/
+	"","","","","","","P0_I3C_APML_ALERT_L","",
+	/*K4-K7 line 168-175*/
+	"","","","","","","irq-uv-detect-alert","",
+	/*L0-L3 line 176-183*/
+	"irq-hsc-alert","",
+	"cpu0-prochot-alert","",
+	"cpu0-thermtrip-alert","",
+	"reset-cause-pcie","",
+	/*L4-L7 line 184-191*/
+	"pvdd11-ocp-alert","","","","","","","",
+	/*M0-M3 line 192-199*/
+	"","","","","","","","",
+	/*M4-M7 line 200-207*/
+	"","","","","","","","",
+	/*N0-N3 line 208-215*/
+	"","","","","","","","",
+	/*N4-N7 line 216-223*/
+	"","","","","","","","",
+	/*O0-O3 line 224-231*/
+	"","","","","","","","",
+	/*O4-O7 line 232-239*/
+	"","","","","","","","",
+	/*P0-P3 line 240-247*/
+	"","","","","","","","",
+	/*P4-P7 line 248-255*/
+	"","","","","","","","";
+};

diff --git a/src/arm/aspeed/aspeed-bmc-facebook-minerva-cmc.dts b/src/arm/aspeed/aspeed-bmc-facebook-minerva-cmc.dts
deleted file mode 100644
index f04ef90..0000000
--- a/src/arm/aspeed/aspeed-bmc-facebook-minerva-cmc.dts
+++ /dev/null

@@ -1,265 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2023 Facebook Inc.
-/dts-v1/;
-
-#include "aspeed-g6.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/i2c/i2c.h>
-
-/ {
-	model = "Facebook Minerva CMC";
-	compatible = "facebook,minerva-cmc", "aspeed,ast2600";
-
-	aliases {
-		serial5 = &uart5;
-	};
-
-	chosen {
-		stdout-path = "serial5:57600n8";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
-			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
-			<&adc1 2>;
-	};
-};
-
-&uart6 {
-	status = "okay";
-};
-
-&wdt1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-	aspeed,reset-type = "soc";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-	aspeed,ext-pulse-duration = <256>;
-};
-
-&mac3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii4_default>;
-	use-ncsi;
-	mlx,multi-host;
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-128.dtsi"
-	};
-	flash@1 {
-		status = "okay";
-		m25p,fast-read;
-		label = "alt-bmc";
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&rtc {
-	status = "okay";
-};
-
-&sgpiom1 {
-	status = "okay";
-	ngpios = <128>;
-	bus-frequency = <2000000>;
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-
-	temperature-sensor@4b {
-		compatible = "ti,tmp75";
-		reg = <0x4B>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c128";
-		reg = <0x51>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-
-	i2c-mux@77 {
-		compatible = "nxp,pca9548";
-		reg = <0x77>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@50 {
-				compatible = "atmel,24c128";
-				reg = <0x50>;
-			};
-		};
-
-		i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@50 {
-				compatible = "atmel,24c128";
-				reg = <0x50>;
-			};
-		};
-
-		i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			eeprom@50 {
-				compatible = "atmel,24c128";
-				reg = <0x50>;
-			};
-		};
-
-		i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			eeprom@50 {
-				compatible = "atmel,24c128";
-				reg = <0x50>;
-			};
-		};
-
-		i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-
-			eeprom@50 {
-				compatible = "atmel,24c128";
-				reg = <0x50>;
-			};
-		};
-
-		i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-
-			eeprom@50 {
-				compatible = "atmel,24c128";
-				reg = <0x50>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&i2c14 {
-	status = "okay";
-	multi-master;
-
-	ipmb@10 {
-		compatible = "ipmb-dev";
-		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
-		i2c-protocol;
-	};
-};
-
-&i2c15 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-};
-
-&adc0 {
-	aspeed,int-vref-microvolt = <2500000>;
-	status = "okay";
-	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
-		&pinctrl_adc2_default &pinctrl_adc3_default
-		&pinctrl_adc4_default &pinctrl_adc5_default
-		&pinctrl_adc6_default &pinctrl_adc7_default>;
-};
-
-&adc1 {
-	aspeed,int-vref-microvolt = <2500000>;
-	status = "okay";
-	pinctrl-0 = <&pinctrl_adc10_default>;
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&uhci {
-	status = "okay";
-};

diff --git a/src/arm/aspeed/aspeed-bmc-facebook-minerva.dts b/src/arm/aspeed/aspeed-bmc-facebook-minerva.dts
new file mode 100644
index 0000000..942e53d
--- /dev/null
+++ b/src/arm/aspeed/aspeed-bmc-facebook-minerva.dts

@@ -0,0 +1,543 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2023 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Minerva CMM";
+	compatible = "facebook,minerva-cmc", "aspeed,ast2600";
+
+	aliases {
+		serial5 = &uart5;
+		/*
+		 * PCA9548 (2-0077) provides 8 channels connecting to
+		 * 6 pcs of FCB (Fan Controller Board).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+	};
+
+	chosen {
+		stdout-path = "serial5:57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-fan-fault {
+			label = "led-fan-fault";
+			gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&uart6 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	power-monitor@40 {
+		compatible = "ti,ina230";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	power-monitor@41 {
+		compatible = "ti,ina230";
+		reg = <0x41>;
+		shunt-resistor = <1000>;
+	};
+
+	power-monitor@67 {
+		compatible = "adi,ltc2945";
+		reg = <0x67>;
+	};
+
+	power-monitor@68 {
+		compatible = "adi,ltc2945";
+		reg = <0x68>;
+	};
+
+	leds_gpio: gpio@19 {
+		compatible = "nxp,pca9555";
+		reg = <0x19>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e{
+				compatible = "max31790";
+				reg = <0x5e>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e{
+				compatible = "max31790";
+				reg = <0x5e>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e{
+				compatible = "max31790";
+				reg = <0x5e>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e{
+				compatible = "max31790";
+				reg = <0x5e>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e{
+				compatible = "max31790";
+				reg = <0x5e>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e{
+				compatible = "max31790";
+				reg = <0x5e>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+	multi-master;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","BLADE_UART_SEL2","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","BLADE_UART_SEL0","","","",
+	/*M0-M7*/	"","","","","","BLADE_UART_SEL1","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","BAT_DETECT","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","BLADE_UART_SEL3","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&sgpiom0 {
+	gpio-line-names =
+	/*"input pin","output pin"*/
+	/*A0 - A7*/
+	"PRSNT_MTIA_BLADE0_N","PWREN_MTIA_BLADE0_EN",
+	"PRSNT_MTIA_BLADE1_N","PWREN_MTIA_BLADE1_EN",
+	"PRSNT_MTIA_BLADE2_N","PWREN_MTIA_BLADE2_EN",
+	"PRSNT_MTIA_BLADE3_N","PWREN_MTIA_BLADE3_EN",
+	"PRSNT_MTIA_BLADE4_N","PWREN_MTIA_BLADE4_EN",
+	"PRSNT_MTIA_BLADE5_N","PWREN_MTIA_BLADE5_EN",
+	"PRSNT_MTIA_BLADE6_N","PWREN_MTIA_BLADE6_EN",
+	"PRSNT_MTIA_BLADE7_N","PWREN_MTIA_BLADE7_EN",
+	/*B0 - B7*/
+	"PRSNT_MTIA_BLADE8_N","PWREN_MTIA_BLADE8_EN",
+	"PRSNT_MTIA_BLADE9_N","PWREN_MTIA_BLADE9_EN",
+	"PRSNT_MTIA_BLADE10_N","PWREN_MTIA_BLADE10_EN",
+	"PRSNT_MTIA_BLADE11_N","PWREN_MTIA_BLADE11_EN",
+	"PRSNT_MTIA_BLADE12_N","PWREN_MTIA_BLADE12_EN",
+	"PRSNT_MTIA_BLADE13_N","PWREN_MTIA_BLADE13_EN",
+	"PRSNT_MTIA_BLADE14_N","PWREN_MTIA_BLADE14_EN",
+	"PRSNT_MTIA_BLADE15_N","PWREN_MTIA_BLADE15_EN",
+	/*C0 - C7*/
+	"PRSNT_NW_BLADE0_N","PWREN_NW_BLADE0_EN",
+	"PRSNT_NW_BLADE1_N","PWREN_NW_BLADE1_EN",
+	"PRSNT_NW_BLADE2_N","PWREN_NW_BLADE2_EN",
+	"PRSNT_NW_BLADE3_N","PWREN_NW_BLADE3_EN",
+	"PRSNT_NW_BLADE4_N","PWREN_NW_BLADE4_EN",
+	"PRSNT_NW_BLADE5_N","PWREN_NW_BLADE5_EN",
+	"PRSNT_FCB_TOP_0_N","PWREN_MTIA_BLADE0_HSC_EN",
+	"PRSNT_FCB_TOP_1_N","PWREN_MTIA_BLADE1_HSC_EN",
+	/*D0 - D7*/
+	"PRSNT_FCB_MIDDLE_0_N","PWREN_MTIA_BLADE2_HSC_EN",
+	"PRSNT_FCB_MIDDLE_1_N","PWREN_MTIA_BLADE3_HSC_EN",
+	"PRSNT_FCB_BOTTOM_0_N","PWREN_MTIA_BLADE4_HSC_EN",
+	"PRSNT_FCB_BOTTOM_1_N","PWREN_MTIA_BLADE5_HSC_EN",
+	"PWRGD_MTIA_BLADE0_PWROK_L_BUF","PWREN_MTIA_BLADE6_HSC_EN",
+	"PWRGD_MTIA_BLADE1_PWROK_L_BUF","PWREN_MTIA_BLADE7_HSC_EN",
+	"PWRGD_MTIA_BLADE2_PWROK_L_BUF","PWREN_MTIA_BLADE8_HSC_EN",
+	"PWRGD_MTIA_BLADE3_PWROK_L_BUF","PWREN_MTIA_BLADE9_HSC_EN",
+	/*E0 - E7*/
+	"PWRGD_MTIA_BLADE4_PWROK_L_BUF","PWREN_MTIA_BLADE10_HSC_EN",
+	"PWRGD_MTIA_BLADE5_PWROK_L_BUF","PWREN_MTIA_BLADE11_HSC_EN",
+	"PWRGD_MTIA_BLADE6_PWROK_L_BUF","PWREN_MTIA_BLADE12_HSC_EN",
+	"PWRGD_MTIA_BLADE7_PWROK_L_BUF","PWREN_MTIA_BLADE13_HSC_EN",
+	"PWRGD_MTIA_BLADE8_PWROK_L_BUF","PWREN_MTIA_BLADE14_HSC_EN",
+	"PWRGD_MTIA_BLADE9_PWROK_L_BUF","PWREN_MTIA_BLADE15_HSC_EN",
+	"PWRGD_MTIA_BLADE10_PWROK_L_BUF","PWREN_NW_BLADE0_HSC_EN",
+	"PWRGD_MTIA_BLADE11_PWROK_L_BUF","PWREN_NW_BLADE1_HSC_EN",
+	/*F0 - F7*/
+	"PWRGD_MTIA_BLADE12_PWROK_L_BUF","PWREN_NW_BLADE2_HSC_EN",
+	"PWRGD_MTIA_BLADE13_PWROK_L_BUF","PWREN_NW_BLADE3_HSC_EN",
+	"PWRGD_MTIA_BLADE14_PWROK_L_BUF","PWREN_NW_BLADE4_HSC_EN",
+	"PWRGD_MTIA_BLADE15_PWROK_L_BUF","PWREN_NW_BLADE5_HSC_EN",
+	"PWRGD_NW_BLADE0_PWROK_L_BUF","PWREN_FCB_TOP_L_EN",
+	"PWRGD_NW_BLADE1_PWROK_L_BUF","PWREN_FCB_TOP_R_EN",
+	"PWRGD_NW_BLADE2_PWROK_L_BUF","PWREN_FCB_MIDDLE_L_EN",
+	"PWRGD_NW_BLADE3_PWROK_L_BUF","PWREN_FCB_MIDDLE_R_EN",
+	/*G0 - G7*/
+	"PWRGD_NW_BLADE4_PWROK_L_BUF","PWREN_FCB_BOTTOM_L_EN",
+	"PWRGD_NW_BLADE5_PWROK_L_BUF","PWREN_FCB_BOTTOM_R_EN",
+	"PWRGD_FCB_TOP_0_PWROK_L_BUF","FM_CMM_AC_CYCLE_N",
+	"PWRGD_FCB_TOP_1_PWROK_L_BUF","MGMT_SFP_TX_DIS",
+	"PWRGD_FCB_MIDDLE_0_PWROK_L_BUF","",
+	"PWRGD_FCB_MIDDLE_1_PWROK_L_BUF","RST_I2CRST_MTIA_BLADE0_1_N",
+	"PWRGD_FCB_BOTTOM_0_PWROK_L_BUF","RST_I2CRST_MTIA_BLADE2_3_N",
+	"PWRGD_FCB_BOTTOM_1_PWROK_L_BUF","RST_I2CRST_MTIA_BLADE4_5_N",
+	/*H0 - H7*/
+	"LEAK_DETECT_MTIA_BLADE0_N_BUF","RST_I2CRST_MTIA_BLADE6_7_N",
+	"LEAK_DETECT_MTIA_BLADE1_N_BUF","RST_I2CRST_MTIA_BLADE8_9_N",
+	"LEAK_DETECT_MTIA_BLADE2_N_BUF","RST_I2CRST_MTIA_BLADE10_11_N",
+	"LEAK_DETECT_MTIA_BLADE3_N_BUF","RST_I2CRST_MTIA_BLADE12_13_N",
+	"LEAK_DETECT_MTIA_BLADE4_N_BUF","RST_I2CRST_MTIA_BLADE14_15_N",
+	"LEAK_DETECT_MTIA_BLADE5_N_BUF","RST_I2CRST_NW_BLADE0_1_2_N",
+	"LEAK_DETECT_MTIA_BLADE6_N_BUF","RST_I2CRST_NW_BLADE3_4_5_N",
+	"LEAK_DETECT_MTIA_BLADE7_N_BUF","RST_I2CRST_FCB_N",
+	/*I0 - I7*/
+	"LEAK_DETECT_MTIA_BLADE8_N_BUF","RST_I2CRST_FCB_B_L_N",
+	"LEAK_DETECT_MTIA_BLADE9_N_BUF","RST_I2CRST_FCB_B_R_N",
+	"LEAK_DETECT_MTIA_BLADE10_N_BUF","RST_I2CRST_FCB_M_L_N",
+	"LEAK_DETECT_MTIA_BLADE11_N_BUF","RST_I2CRST_FCB_M_R_N",
+	"LEAK_DETECT_MTIA_BLADE12_N_BUF","RST_I2CRST_FCB_T_L_N",
+	"LEAK_DETECT_MTIA_BLADE13_N_BUF","RST_I2CRST_FCB_T_R_N",
+	"LEAK_DETECT_MTIA_BLADE14_N_BUF","BMC_READY",
+	"LEAK_DETECT_MTIA_BLADE15_N_BUF","wFM_88E6393X_BIN_UPDATE_EN_N",
+	/*J0 - J7*/
+	"LEAK_DETECT_NW_BLADE0_N_BUF","WATER_VALVE_CLOSED_N",
+	"LEAK_DETECT_NW_BLADE1_N_BUF","",
+	"LEAK_DETECT_NW_BLADE2_N_BUF","",
+	"LEAK_DETECT_NW_BLADE3_N_BUF","",
+	"LEAK_DETECT_NW_BLADE4_N_BUF","",
+	"LEAK_DETECT_NW_BLADE5_N_BUF","",
+	"MTIA_BLADE0_STATUS_LED","",
+	"MTIA_BLADE1_STATUS_LED","",
+	/*K0 - K7*/
+	"MTIA_BLADE2_STATUS_LED","",
+	"MTIA_BLADE3_STATUS_LED","",
+	"MTIA_BLADE4_STATUS_LED","",
+	"MTIA_BLADE5_STATUS_LED","",
+	"MTIA_BLADE6_STATUS_LED","",
+	"MTIA_BLADE7_STATUS_LED","",
+	"MTIA_BLADE8_STATUS_LED","",
+	"MTIA_BLADE9_STATUS_LED","",
+	/*L0 - L7*/
+	"MTIA_BLADE10_STATUS_LED","",
+	"MTIA_BLADE11_STATUS_LED","",
+	"MTIA_BLADE12_STATUS_LED","",
+	"MTIA_BLADE13_STATUS_LED","",
+	"MTIA_BLADE14_STATUS_LED","",
+	"MTIA_BLADE15_STATUS_LED","",
+	"NW_BLADE0_STATUS_LED","",
+	"NW_BLADE1_STATUS_LED","",
+	/*M0 - M7*/
+	"NW_BLADE2_STATUS_LED","",
+	"NW_BLADE3_STATUS_LED","",
+	"NW_BLADE4_STATUS_LED","",
+	"NW_BLADE5_STATUS_LED","",
+	"RPU_READY","",
+	"IT_GEAR_RPU_LINK_N","",
+	"IT_GEAR_LEAK","",
+	"WATER_VALVE_CLOSED_N","",
+	/*N0 - N7*/
+	"VALVE_STS0","",
+	"VALVE_STS1","",
+	"VALVE_STS2","",
+	"VALVE_STS3","",
+	"CR_TOGGLE_BOOT_BUF_N","",
+	"CMM_LC_RDY_LED_N","",
+	"CMM_LC_UNRDY_LED_N","",
+	"CMM_CABLE_CARTRIDGE_PRSNT_BOT_N","",
+	/*O0 - O7*/
+	"CMM_CABLE_CARTRIDGE_PRSNT_TOP_N","",
+	"BOT_BCB_CABLE_PRSNT_N","",
+	"TOP_BCB_CABLE_PRSNT_N","",
+	"CHASSIS0_LEAK_Q_N","",
+	"CHASSIS1_LEAK_Q_N","",
+	"LEAK0_DETECT","",
+	"LEAK1_DETECT","",
+	"MGMT_SFP_PRSNT_N","",
+	/*P0 - P7*/
+	"MGMT_SFP_TX_FAULT","",
+	"MGMT_SFP_RX_LOS","",
+	"","",
+	"","",
+	"","",
+	"","",
+	"","",
+	"","";
+};

diff --git a/src/arm/aspeed/aspeed-bmc-facebook-yosemite4.dts b/src/arm/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 64075cc..9847779 100644
--- a/src/arm/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/src/arm/aspeed/aspeed-bmc-facebook-yosemite4.dts

@@ -88,7 +88,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii3_default>;
 	use-ncsi;
-	mlx,multi-host;
+	mellanox,multi-host;
 };
 
 &mac3 {
@@ -96,7 +96,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii4_default>;
 	use-ncsi;
-	mlx,multi-host;
+	mellanox,multi-host;
 };
 
 &fmc {
@@ -369,7 +369,14 @@
 
 &i2c13 {
 	status = "okay";
-	bus-frequency = <400000>;
+	bus-frequency = <100000>;
+	multi-master;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
 };
 
 &i2c14 {
@@ -596,7 +603,6 @@
 };
 
 &adc0 {
-	ref_voltage = <2500>;
 	status = "okay";
 	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
 			&pinctrl_adc2_default &pinctrl_adc3_default
@@ -605,7 +611,6 @@
 };
 
 &adc1 {
-	ref_voltage = <2500>;
 	status = "okay";
 	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default>;
 };

diff --git a/src/arm/aspeed/aspeed-bmc-facebook-yosemitev2.dts b/src/arm/aspeed/aspeed-bmc-facebook-yosemitev2.dts
index 6bf2ff8..5143f85 100644
--- a/src/arm/aspeed/aspeed-bmc-facebook-yosemitev2.dts
+++ b/src/arm/aspeed/aspeed-bmc-facebook-yosemitev2.dts

@@ -95,7 +95,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii1_default>;
 	use-ncsi;
-	mlx,multi-host;
+	mellanox,multi-host;
 };
 
 &adc {

diff --git a/src/arm/aspeed/aspeed-bmc-ibm-bonnell.dts b/src/arm/aspeed/aspeed-bmc-ibm-bonnell.dts
index cad1b9a..6fdda42 100644
--- a/src/arm/aspeed/aspeed-bmc-ibm-bonnell.dts
+++ b/src/arm/aspeed/aspeed-bmc-ibm-bonnell.dts

@@ -488,7 +488,7 @@
 		#gpio-cells = <2>;
 
 		led@0 {
-			label = "nvme0";
+			label = "nvme3";
 			reg = <0>;
 			retain-state-shutdown;
 			default-state = "keep";
@@ -496,7 +496,7 @@
 		};
 
 		led@1 {
-			label = "nvme1";
+			label = "nvme2";
 			reg = <1>;
 			retain-state-shutdown;
 			default-state = "keep";
@@ -504,7 +504,7 @@
 		};
 
 		led@2 {
-			label = "nvme2";
+			label = "nvme1";
 			reg = <2>;
 			retain-state-shutdown;
 			default-state = "keep";
@@ -512,7 +512,7 @@
 		};
 
 		led@3 {
-			label = "nvme3";
+			label = "nvme0";
 			reg = <3>;
 			retain-state-shutdown;
 			default-state = "keep";

diff --git a/src/arm/aspeed/aspeed-bmc-ibm-system1.dts b/src/arm/aspeed/aspeed-bmc-ibm-system1.dts
new file mode 100644
index 0000000..dcbc163
--- /dev/null
+++ b/src/arm/aspeed/aspeed-bmc-ibm-system1.dts

@@ -0,0 +1,1623 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "System1";
+	compatible = "ibm,system1-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c16 = &i2c8mux1chn0;
+		i2c17 = &i2c8mux1chn1;
+		i2c18 = &i2c8mux1chn2;
+		i2c19 = &i2c8mux1chn3;
+		i2c20 = &i2c8mux1chn4;
+		i2c21 = &i2c8mux1chn5;
+		i2c22 = &i2c8mux1chn6;
+		i2c23 = &i2c8mux1chn7;
+		i2c24 = &i2c3mux0chn0;
+		i2c25 = &i2c3mux0chn1;
+		i2c26 = &i2c3mux0chn2;
+		i2c27 = &i2c3mux0chn3;
+		i2c28 = &i2c3mux0chn4;
+		i2c29 = &i2c3mux0chn5;
+		i2c30 = &i2c3mux0chn6;
+		i2c31 = &i2c3mux0chn7;
+		i2c32 = &i2c6mux0chn0;
+		i2c33 = &i2c6mux0chn1;
+		i2c34 = &i2c6mux0chn2;
+		i2c35 = &i2c6mux0chn3;
+		i2c36 = &i2c6mux0chn4;
+		i2c37 = &i2c6mux0chn5;
+		i2c38 = &i2c6mux0chn6;
+		i2c39 = &i2c6mux0chn7;
+		i2c40 = &i2c7mux0chn0;
+		i2c41 = &i2c7mux0chn1;
+		i2c42 = &i2c7mux0chn2;
+		i2c43 = &i2c7mux0chn3;
+		i2c44 = &i2c7mux0chn4;
+		i2c45 = &i2c7mux0chn5;
+		i2c46 = &i2c7mux0chn6;
+		i2c47 = &i2c7mux0chn7;
+		i2c48 = &i2c8mux0chn0;
+		i2c49 = &i2c8mux0chn1;
+		i2c50 = &i2c8mux0chn2;
+		i2c51 = &i2c8mux0chn3;
+		i2c52 = &i2c8mux0chn4;
+		i2c53 = &i2c8mux0chn5;
+		i2c54 = &i2c8mux0chn6;
+		i2c55 = &i2c8mux0chn7;
+		i2c56 = &i2c14mux0chn0;
+		i2c57 = &i2c14mux0chn1;
+		i2c58 = &i2c14mux0chn2;
+		i2c59 = &i2c14mux0chn3;
+		i2c60 = &i2c14mux0chn4;
+		i2c61 = &i2c14mux0chn5;
+		i2c62 = &i2c14mux0chn6;
+		i2c63 = &i2c14mux0chn7;
+		i2c64 = &i2c15mux0chn0;
+		i2c65 = &i2c15mux0chn1;
+		i2c66 = &i2c15mux0chn2;
+		i2c67 = &i2c15mux0chn3;
+		i2c68 = &i2c15mux0chn4;
+		i2c69 = &i2c15mux0chn5;
+		i2c70 = &i2c15mux0chn6;
+		i2c71 = &i2c15mux0chn7;
+	};
+
+	chosen {
+		stdout-path = "uart5:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		eventlog: tcg-event-log@b3d00000 {
+			no-map;
+			reg = <0xb3d00000 0x100000>;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			gpios = <&gpio0 ASPEED_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			gpios = <&gpio0 ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-4 {
+			gpios = <&pca3 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			gpios = <&pca3 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			gpios = <&pca3 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			gpios = <&pca3 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led-8 {
+			gpios = <&pca3 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-9 {
+			gpios = <&pca3 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-a {
+			gpios = <&pca3 11 GPIO_ACTIVE_LOW>;
+		};
+
+		led-b {
+			gpios = <&pca4 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-c {
+			gpios = <&pca4 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-d {
+			gpios = <&pca4 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-e {
+			gpios = <&pca4 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-nvme0-presence {
+			label = "nvme0-presence";
+			gpios = <&pca4 0 GPIO_ACTIVE_LOW>;
+			linux,code = <0>;
+		};
+
+		event-nvme1-presence {
+			label = "nvme1-presence";
+			gpios = <&pca4 1 GPIO_ACTIVE_LOW>;
+			linux,code = <1>;
+		};
+
+		event-nvme2-presence {
+			label = "nvme2-presence";
+			gpios = <&pca4 2 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		event-nvme3-presence {
+			label = "nvme3-presence";
+			gpios = <&pca4 3 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&p12v_vd 0>, <&p5v_aux_vd 0>,
+			<&p5v_bmc_aux_vd 0>, <&p3v3_aux_vd 0>,
+			<&p3v3_bmc_aux_vd 0>, <&p1v8_bmc_aux_vd 0>,
+			<&adc1 4>, <&adc0 2>, <&adc1 0>,
+			<&p2v5_aux_vd 0>, <&adc1 7>;
+	};
+
+	p12v_vd: voltage-divider1 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1127/127 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <15>;
+		full-ohms = <133>;
+	};
+
+	p5v_aux_vd: voltage-divider2 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 5>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p5v_bmc_aux_vd: voltage-divider3 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p3v3_aux_vd: voltage-divider4 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 2>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p3v3_bmc_aux_vd: voltage-divider5 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 7>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p1v8_bmc_aux_vd: voltage-divider6 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 6>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 4000/3000 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <3>;
+		full-ohms = <4>;
+	};
+
+	p2v5_aux_vd: voltage-divider7 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 1>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 2100/1100 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <11>;
+		full-ohms = <21>;
+	};
+
+	p1v8_bmc_aux: fixedregulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&adc0 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+	aspeed,battery-sensing;
+
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","bmc-tpm-reset","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","bmc-ready",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","bmc-hb",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","rear-enc-fault0","rear-enc-id0",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","rtc-battery-voltage-read-enable","","power-chassis-control","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","power-chassis-good","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	regulator@60 {
+		compatible = "maxim,max8952";
+		reg = <0x60>;
+
+		max8952,default-mode = <0>;
+		max8952,dvs-mode-microvolt = <1250000>, <1200000>,
+						<1050000>, <950000>;
+		max8952,sync-freq = <0>;
+		max8952,ramp-speed = <0>;
+
+		regulator-name = "VR_v77_1v4";
+		regulator-min-microvolt = <770000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	regulator@42 {
+		compatible = "infineon,ir38263";
+		reg = <0x42>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nic1-perst";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "bmc-perst";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "reset-M2-SSD1-2-perst";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "pcie-perst1";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcie-perst2";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "pcie-perst3";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "pcie-perst4";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "pcie-perst5";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "pcie-perst6";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcie-perst7";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcie-perst8";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "PV-cp0-sw1stk4-perst";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "PV-cp0-sw1stk5-perst";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "pe-cp-drv0-perst";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "pe-cp-drv1-perst";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "lom-perst";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"PLUG_DETECT_PCIE_J101_N",
+			"PLUG_DETECT_PCIE_J102_N",
+			"PLUG_DETECT_PCIE_J103_N",
+			"PLUG_DETECT_PCIE_J104_N",
+			"PLUG_DETECT_PCIE_J105_N",
+			"PLUG_DETECT_PCIE_J106_N",
+			"PLUG_DETECT_PCIE_J107_N",
+			"PLUG_DETECT_PCIE_J108_N",
+			"PLUG_DETECT_M2_SSD1_N",
+			"PLUG_DETECT_NIC1_N",
+			"SEL_SMB_DIMM_CPU0",
+			"presence-ps2",
+			"presence-ps3",
+			"", "",
+			"PWRBRD_PLUG_DETECT2_N";
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	power-supply@58 {
+		compatible = "ibm,cffps";
+		reg = <0x58>;
+	};
+
+	power-supply@59 {
+		compatible = "ibm,cffps";
+		reg = <0x59>;
+	};
+
+	power-supply@5a {
+		compatible = "ibm,cffps";
+		reg = <0x5a>;
+	};
+
+	power-supply@5b {
+		compatible = "ibm,cffps";
+		reg = <0x5b>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c3mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c3mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c3mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c3mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c3mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c3mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c3mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c3mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+
+	regulator@42 {
+		compatible = "infineon,ir38263";
+		reg = <0x42>;
+	};
+
+	regulator@43 {
+		compatible = "infineon,ir38060";
+		reg = <0x43>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	fan-controller@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+	};
+
+	fan-controller@54 {
+		compatible = "maxim,max31785a";
+		reg = <0x54>;
+	};
+
+	eeprom@55 {
+		compatible = "atmel,24c64";
+		reg = <0x55>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c6mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			humidity-sensor@40 {
+				compatible = "ti,hdc1080";
+				reg = <0x40>;
+			};
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp275";
+				reg = <0x48>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "enclosure-id-led";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "attention-led";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					label = "enclosure-fault-rollup-led";
+					reg = <2>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					label = "power-on-led";
+					reg = <3>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+
+			temperature-sensor@76 {
+				compatible = "infineon,dps310";
+				reg = <0x76>;
+			};
+		};
+
+		i2c6mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c6mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c6mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+
+	pca3: gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca4: gpio@77 {
+		compatible = "nxp,pca9539";
+		reg = <0x77>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"PE_NVMED0_EXP_PRSNT_N",
+			"PE_NVMED1_EXP_PRSNT_N",
+			"PE_NVMED2_EXP_PRSNT_N",
+			"PE_NVMED3_EXP_PRSNT_N",
+			"LED_FAULT_NVMED0",
+			"LED_FAULT_NVMED1",
+			"LED_FAULT_NVMED2",
+			"LED_FAULT_NVMED3",
+			"FAN0_PRESENCE_R_N",
+			"FAN1_PRESENCE_R_N",
+			"FAN2_PRESENCE_R_N",
+			"FAN3_PRESENCE_R_N",
+			"FAN4_PRESENCE_R_N",
+			"FAN5_PRESENCE_N",
+			"FAN6_PRESENCE_N",
+			"";
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c7mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c7mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c7mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c7mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			regulator@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+			};
+		};
+
+		i2c7mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c7mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+		};
+
+		i2c7mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c7mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c8mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+		};
+
+		i2c8mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+
+			regulator@41 {
+				compatible = "infineon,tda38640";
+				reg = <0x41>;
+			};
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+
+			regulator@5b {
+				compatible = "mps,mp2971";
+				reg = <0x5b>;
+			};
+		};
+
+		i2c8mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c8mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c8mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c8mux1chn0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c8mux1chn1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c8mux1chn2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c8mux1chn3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				i2c8mux1chn4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				i2c8mux1chn5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				i2c8mux1chn6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				i2c8mux1chn7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		i2c8mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c8mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp423";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c8mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			regulator@40 {
+				compatible = "infineon,ir38060";
+				reg = <0x40>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	regulator@40 {
+		compatible = "infineon,ir38263";
+		reg = <0x40>;
+	};
+
+	regulator@41 {
+		compatible = "infineon,ir38263";
+		reg = <0x41>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	regulator@60 {
+		compatible = "maxim,max8952";
+		reg = <0x60>;
+
+		max8952,default-mode = <0>;
+		max8952,dvs-mode-microvolt = <1250000>, <1200000>,
+						<1050000>, <950000>;
+		max8952,sync-freq = <0>;
+		max8952,ramp-speed = <0>;
+
+		regulator-name = "VR_v77_1v4";
+		regulator-min-microvolt = <770000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&eventlog>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+
+	regulator@41 {
+		compatible = "infineon,ir38263";
+		reg = <0x41>;
+	};
+
+	led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "efuse-12v-slots";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "efuse-3p3v-slot";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nic2-pert";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcie-perst9";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "pcie-perst10";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "pcie-perst11";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "pcie-perst12";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "pcie-perst13";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcie-perst14";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcie-perst15";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "pcie-perst16";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "PV-cp1-sw1stk4-perst";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "PV-cp1-sw1stk5-perst";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "pe-cp-drv2-perst";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "pe-cp-drv3-perst";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	gpio@75 {
+		compatible = "nxp,pca9539";
+		reg = <0x75>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"PLUG_DETECT_PCIE_J109_N",
+			"PLUG_DETECT_PCIE_J110_N",
+			"PLUG_DETECT_PCIE_J111_N",
+			"PLUG_DETECT_PCIE_J112_N",
+			"PLUG_DETECT_PCIE_J113_N",
+			"PLUG_DETECT_PCIE_J114_N",
+			"PLUG_DETECT_PCIE_J115_N",
+			"PLUG_DETECT_PCIE_J116_N",
+			"PLUG_DETECT_M2_SSD2_N",
+			"PLUG_DETECT_NIC2_N",
+			"SEL_SMB_DIMM_CPU1",
+			"presence-ps0",
+			"presence-ps1",
+			"", "",
+			"PWRBRD_PLUG_DETECT1_N";
+	};
+
+	gpio@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SW1_BOOTRCVRYB1_N",
+			"SW1_BOOTRCVRYB0_N",
+			"SW2_BOOTRCVRYB1_N",
+			"SW2_BOOTRCVRYB0_N",
+			"SW3_4_BOOTRCVRYB1_N",
+			"SW3_4_BOOTRCVRYB0_N",
+			"SW5_BOOTRCVRYB1_N",
+			"SW5_BOOTRCVRYB0_N",
+			"SW6_BOOTRCVRYB1_N",
+			"SW6_BOOTRCVRYB0_N",
+			"SW1_RESET_N",
+			"SW3_RESET_N",
+			"SW4_RESET_N",
+			"SW2_RESET_N",
+			"SW5_RESET_N",
+			"SW6_RESET_N";
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c14mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c14mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c14mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c14mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			regulator@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+			};
+		};
+
+		i2c14mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c14mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+		};
+
+		i2c14mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c14mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+		};
+
+		i2c15mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+
+			regulator@41 {
+				compatible = "infineon,tda38640";
+				reg = <0x41>;
+			};
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+
+			regulator@5b {
+				compatible = "mps,mp2971";
+				reg = <0x5b>;
+			};
+		};
+
+		i2c15mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c15mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c15mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c15mux1chn0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c15mux1chn1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c15mux1chn2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c15mux1chn3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				i2c15mux1chn4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				i2c15mux1chn5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				i2c15mux1chn6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				i2c15mux1chn7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		i2c15mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c15mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp423";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c15mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			regulator@40 {
+				compatible = "infineon,ir38060";
+				reg = <0x40>;
+			};
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp423";
+				reg = <0x4c>;
+			};
+		};
+	};
+};

diff --git a/src/arm/aspeed/aspeed-g6.dtsi b/src/arm/aspeed/aspeed-g6.dtsi
index 29f9469..7fb4211 100644
--- a/src/arm/aspeed/aspeed-g6.dtsi
+++ b/src/arm/aspeed/aspeed-g6.dtsi

@@ -867,22 +867,26 @@
 			};
 
 			fsim0: fsi@1e79b000 {
+				#interrupt-cells = <1>;
 				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
 				reg = <0x1e79b000 0x94>;
 				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_fsi1_default>;
 				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+				interrupt-controller;
 				status = "disabled";
 			};
 
 			fsim1: fsi@1e79b100 {
+				#interrupt-cells = <1>;
 				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
 				reg = <0x1e79b100 0x94>;
 				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_fsi2_default>;
 				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+				interrupt-controller;
 				status = "disabled";
 			};
 

diff --git a/src/arm/aspeed/ibm-power10-dual.dtsi b/src/arm/aspeed/ibm-power10-dual.dtsi
index cc46691..07ce3b2 100644
--- a/src/arm/aspeed/ibm-power10-dual.dtsi
+++ b/src/arm/aspeed/ibm-power10-dual.dtsi

@@ -165,10 +165,12 @@
 		};
 
 		fsi_hub0: hub@3400 {
+			#interrupt-cells = <1>;
 			compatible = "fsi-master-hub";
 			reg = <0x3400 0x400>;
 			#address-cells = <2>;
 			#size-cells = <0>;
+			interrupt-controller;
 		};
 	};
 };

diff --git a/src/arm/broadcom/bcm2711-rpi-4-b.dts b/src/arm/broadcom/bcm2711-rpi-4-b.dts
index d5f8823..353bb50 100644
--- a/src/arm/broadcom/bcm2711-rpi-4-b.dts
+++ b/src/arm/broadcom/bcm2711-rpi-4-b.dts

@@ -5,6 +5,7 @@
 #include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-peripheral.dtsi"
 #include "bcm283x-rpi-wifi-bt.dtsi"
+#include <dt-bindings/leds/common.h>
 
 / {
 	compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
@@ -15,6 +16,13 @@
 		stdout-path = "serial1:115200n8";
 	};
 
+	cam1_reg: regulator-cam1 {
+		compatible = "regulator-fixed";
+		regulator-name = "cam1-reg";
+		enable-active-high;
+		gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>;
+	};
+
 	sd_io_1v8_reg: regulator-sd-io-1v8 {
 		compatible = "regulator-gpio";
 		regulator-name = "vdd-sd-io";
@@ -197,6 +205,27 @@
 	phy1: ethernet-phy@1 {
 		/* No PHY interrupt */
 		reg = <0x1>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* LED1 */
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			/* LED2 */
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_AMBER>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
 	};
 };
 

diff --git a/src/arm/broadcom/bcm2711-rpi-400.dts b/src/arm/broadcom/bcm2711-rpi-400.dts
index 5a2869a..ca9be91 100644
--- a/src/arm/broadcom/bcm2711-rpi-400.dts
+++ b/src/arm/broadcom/bcm2711-rpi-400.dts

@@ -30,6 +30,7 @@
 
 &genet_mdio {
 	clock-frequency = <1950000>;
+	/delete-node/ leds;
 };
 
 &led_pwr {

diff --git a/src/arm/broadcom/bcm2711-rpi-cm4-io.dts b/src/arm/broadcom/bcm2711-rpi-cm4-io.dts
index d7ba02f..6bc77dd 100644
--- a/src/arm/broadcom/bcm2711-rpi-cm4-io.dts
+++ b/src/arm/broadcom/bcm2711-rpi-cm4-io.dts

@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
+#include <dt-bindings/leds/common.h>
 #include "bcm2711-rpi-cm4.dtsi"
 #include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
@@ -101,6 +102,38 @@
 	status = "okay";
 };
 
+&i2c0_1 {
+	rtc@51 {
+		/* Attention: An alarm resets the machine */
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+};
+
+&phy1 {
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* LED2 */
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+
+		/* LED3 */
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+	};
+};
+
 &led_act {
 	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
 };

diff --git a/src/arm/broadcom/bcm2711-rpi.dtsi b/src/arm/broadcom/bcm2711-rpi.dtsi
index d233a19..6bf4241 100644
--- a/src/arm/broadcom/bcm2711-rpi.dtsi
+++ b/src/arm/broadcom/bcm2711-rpi.dtsi

@@ -17,14 +17,33 @@
 		pcie0 = &pcie0;
 		blconfig = &blconfig;
 	};
-};
 
-&firmware {
-	firmware_clocks: clocks {
-		compatible = "raspberrypi,firmware-clocks";
-		#clock-cells = <1>;
+	i2c0mux: i2c-mux0 {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c0>;
+
+		pinctrl-names = "i2c0", "i2c0-vc";
+		pinctrl-0 = <&i2c0_gpio0>;
+		pinctrl-1 = <&i2c0_gpio44>;
+
+		i2c0_0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c0_1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
 	};
+};
 
+&firmware {
 	expgpio: gpio {
 		compatible = "raspberrypi,firmware-gpio";
 		gpio-controller;
@@ -54,6 +73,11 @@
 	clocks = <&firmware_clocks 4>;
 };
 
+&i2c0 {
+	/delete-property/ pinctrl-names;
+	/delete-property/ pinctrl-0;
+};
+
 &rmem {
 	/*
 	 * RPi4's co-processor will copy the board's bootloader configuration

diff --git a/src/arm/broadcom/bcm2711.dtsi b/src/arm/broadcom/bcm2711.dtsi
index 22c7f15..e4e42af 100644
--- a/src/arm/broadcom/bcm2711.dtsi
+++ b/src/arm/broadcom/bcm2711.dtsi

@@ -432,8 +432,8 @@
 		};
 	};
 
-	arm-pmu {
-		compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3";
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 			<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 			<GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -1114,6 +1114,14 @@
 	#address-cells = <2>;
 };
 
+&csi0 {
+	interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&csi1 {
+	interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &cma {
 	/*
 	 * arm64 reserves the CMA by default somewhere in ZONE_DMA32,

diff --git a/src/arm/broadcom/bcm2835-rpi-common.dtsi b/src/arm/broadcom/bcm2835-rpi-common.dtsi
index 4e7b4a5..8b3c21d 100644
--- a/src/arm/broadcom/bcm2835-rpi-common.dtsi
+++ b/src/arm/broadcom/bcm2835-rpi-common.dtsi

@@ -7,13 +7,6 @@
 
 #include <dt-bindings/power/raspberrypi-power.h>
 
-&firmware {
-	firmware_clocks: clocks {
-		compatible = "raspberrypi,firmware-clocks";
-		#clock-cells = <1>;
-	};
-};
-
 &hdmi {
 	clocks = <&firmware_clocks 9>,
 		 <&firmware_clocks 13>;

diff --git a/src/arm/broadcom/bcm2835-rpi.dtsi b/src/arm/broadcom/bcm2835-rpi.dtsi
index f0acc93..e9bf41b 100644
--- a/src/arm/broadcom/bcm2835-rpi.dtsi
+++ b/src/arm/broadcom/bcm2835-rpi.dtsi

@@ -4,11 +4,12 @@
 	soc {
 		firmware: firmware {
 			compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
 			mboxes = <&mailbox>;
-			dma-ranges;
+
+			firmware_clocks: clocks {
+				compatible = "raspberrypi,firmware-clocks";
+				#clock-cells = <1>;
+			};
 		};
 
 		power: power {
@@ -25,6 +26,20 @@
 	};
 };
 
+&csi0 {
+	clocks = <&clocks BCM2835_CLOCK_CAM0>,
+		 <&firmware_clocks 4>;
+	clock-names = "lp", "vpu";
+	power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>;
+};
+
+&csi1 {
+	clocks = <&clocks BCM2835_CLOCK_CAM1>,
+		 <&firmware_clocks 4>;
+	clock-names = "lp", "vpu";
+	power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>;
+};
+
 &gpio {
 	gpioout: gpioout {
 		brcm,pins = <6>;

diff --git a/src/arm/broadcom/bcm283x.dtsi b/src/arm/broadcom/bcm283x.dtsi
index 2ca8a25..69b0919 100644
--- a/src/arm/broadcom/bcm283x.dtsi
+++ b/src/arm/broadcom/bcm283x.dtsi

@@ -454,6 +454,30 @@
 			status = "disabled";
 		};
 
+		csi0: csi@7e800000 {
+			compatible = "brcm,bcm2835-unicam";
+			reg = <0x7e800000 0x800>,
+			      <0x7e802000 0x4>;
+			reg-names = "unicam", "cmi";
+			interrupts = <2 6>;
+			brcm,num-data-lanes = <2>;
+			status = "disabled";
+			port {
+			};
+		};
+
+		csi1: csi@7e801000 {
+			compatible = "brcm,bcm2835-unicam";
+			reg = <0x7e801000 0x800>,
+			      <0x7e802004 0x4>;
+			reg-names = "unicam", "cmi";
+			interrupts = <2 7>;
+			brcm,num-data-lanes = <4>;
+			status = "disabled";
+			port {
+			};
+		};
+
 		i2c1: i2c@7e804000 {
 			compatible = "brcm,bcm2835-i2c";
 			reg = <0x7e804000 0x1000>;

diff --git a/src/arm/broadcom/bcm4709-asus-rt-ac3200.dts b/src/arm/broadcom/bcm4709-asus-rt-ac3200.dts
new file mode 100644
index 0000000..53cb0c5
--- /dev/null
+++ b/src/arm/broadcom/bcm4709-asus-rt-ac3200.dts

@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Tom Brautaset <tbrautaset@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "asus,rt-ac3200", "brcm,bcm4709", "brcm,bcm4708";
+	model = "ASUS RT-AC3200";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x00180000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_WPS;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et0macaddr 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+	nvmem-cells = <&et0macaddr 2>;
+	nvmem-cell-names = "mac-address";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			reg = <0x00000000 0x00080000>;
+			label = "boot";
+			read-only;
+		};
+
+		partition@80000 {
+			reg = <0x00080000 0x00180000>;
+			label = "nvram";
+		};
+
+		partition@200000 {
+			compatible = "brcm,trx";
+			reg = <0x00200000 0x07e00000>;
+			label = "firmware";
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+		};
+
+		port@1 {
+			label = "lan1";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan3";
+		};
+
+		port@4 {
+			label = "lan4";
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};

diff --git a/src/arm/broadcom/bcm47094-asus-rt-ac3100.dts b/src/arm/broadcom/bcm47094-asus-rt-ac3100.dts
index 5f08930..1655ac9 100644
--- a/src/arm/broadcom/bcm47094-asus-rt-ac3100.dts
+++ b/src/arm/broadcom/bcm47094-asus-rt-ac3100.dts

@@ -13,11 +13,22 @@
 
 	nvram@1c080000 {
 		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
 		};
 	};
 };
 
 &gmac0 {
-	nvmem-cells = <&et0macaddr>;
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et0macaddr 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+	nvmem-cells = <&et0macaddr 2>;
 	nvmem-cell-names = "mac-address";
 };

diff --git a/src/arm/broadcom/bcm47094-asus-rt-ac3100.dtsi b/src/arm/broadcom/bcm47094-asus-rt-ac3100.dtsi
index 09cefce..2cfaaab 100644
--- a/src/arm/broadcom/bcm47094-asus-rt-ac3100.dtsi
+++ b/src/arm/broadcom/bcm47094-asus-rt-ac3100.dtsi

@@ -6,15 +6,13 @@
 #include "bcm47094.dtsi"
 #include "bcm5301x-nand-cs0-bch8.dtsi"
 
-/ {
-	chosen {
-		bootargs = "earlycon";
-	};
+#include <dt-bindings/leds/common.h>
 
+/ {
 	memory@0 {
-		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x18000000>;
+		device_type = "memory";
 	};
 
 	nvram@1c080000 {
@@ -22,76 +20,108 @@
 		reg = <0x1c080000 0x00180000>;
 	};
 
-	leds {
-		compatible = "gpio-leds";
+	gpio-keys {
+		compatible = "gpio-keys";
 
-		led-power {
-			label = "white:power";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
+		button-led {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		led-wan-red {
-			label = "red:wan";
-			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
 
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
 		led-lan {
-			label = "white:lan";
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_LAN;
 			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
 		};
 
+		led-power {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
 		led-usb2 {
-			label = "white:usb2";
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
 			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
 		led-usb3 {
-			label = "white:usb3";
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ehci_port1>, <&xhci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
+		led-wan-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
 		led-wps {
-			label = "white:wps";
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_WPS;
 			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
 		};
 	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
+};
 
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
-		};
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-		button-reset {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		partition@0 {
+			reg = <0x00000000 0x00080000>;
+			label = "boot";
+			read-only;
 		};
 
-		button-wifi {
-			label = "Wi-Fi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		partition@80000 {
+			reg = <0x00080000 0x00180000>;
+			label = "nvram";
 		};
 
-		button-led {
-			label = "Backlight";
-			linux,code = <KEY_BRIGHTNESS_ZERO>;
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		partition@200000 {
+			compatible = "brcm,trx";
+			reg = <0x00200000 0x07e00000>;
+			label = "firmware";
 		};
 	};
 };
 
 &srab {
-	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
 	status = "okay";
 
 	ports {
@@ -136,28 +166,3 @@
 &usb3_phy {
 	status = "okay";
 };
-
-&nandcs {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x00080000>;
-			read-only;
-		};
-
-		partition@80000 {
-			label = "nvram";
-			reg = <0x00080000 0x00180000>;
-		};
-
-		partition@200000 {
-			label = "firmware";
-			reg = <0x00200000 0x07e00000>;
-			compatible = "brcm,trx";
-		};
-	};
-};

diff --git a/src/arm/broadcom/bcm47094-asus-rt-ac5300.dts b/src/arm/broadcom/bcm47094-asus-rt-ac5300.dts
new file mode 100644
index 0000000..6c666dc
--- /dev/null
+++ b/src/arm/broadcom/bcm47094-asus-rt-ac5300.dts

@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Tom Brautaset <tbrautaset@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "asus,rt-ac5300", "brcm,bcm47094", "brcm,bcm4708";
+	model = "ASUS RT-AC5300";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+		device_type = "memory";
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x00180000>;
+
+		et1macaddr: et1macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-lan {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_WPS;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et1macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et1macaddr 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+	nvmem-cells = <&et1macaddr 2>;
+	nvmem-cell-names = "mac-address";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			reg = <0x00000000 0x00080000>;
+			label = "boot";
+			read-only;
+		};
+
+		partition@80000 {
+			reg = <0x00080000 0x00180000>;
+			label = "nvram";
+		};
+
+		partition@200000 {
+			compatible = "brcm,trx";
+			reg = <0x00200000 0x07e00000>;
+			label = "firmware";
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};

diff --git a/src/arm/broadcom/bcm47094-asus-rt-ac88u.dts b/src/arm/broadcom/bcm47094-asus-rt-ac88u.dts
index fd344b5..a197f44 100644
--- a/src/arm/broadcom/bcm47094-asus-rt-ac88u.dts
+++ b/src/arm/broadcom/bcm47094-asus-rt-ac88u.dts

@@ -13,18 +13,40 @@
 
 	nvram@1c080000 {
 		et1macaddr: et1macaddr {
+			#nvmem-cell-cells = <1>;
 		};
 	};
 
 	switch {
 		compatible = "realtek,rtl8365mb";
-		/* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
 		mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 		mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 		realtek,disable-leds;
 		dsa,member = <1 0>;
 
+		mdio {
+			compatible = "realtek,smi-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethphy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethphy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+
 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -68,29 +90,21 @@
 				};
 			};
 		};
-
-		mdio {
-			compatible = "realtek,smi-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ethphy0: ethernet-phy@0 {
-				reg = <0>;
-			};
+	};
+};
 
-			ethphy1: ethernet-phy@1 {
-				reg = <1>;
-			};
+&gmac0 {
+	status = "disabled";
+};
 
-			ethphy2: ethernet-phy@2 {
-				reg = <2>;
-			};
+&gmac1 {
+	nvmem-cells = <&et1macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
 
-			ethphy3: ethernet-phy@3 {
-				reg = <3>;
-			};
-		};
-	};
+&gmac2 {
+	nvmem-cells = <&et1macaddr 1>;
+	nvmem-cell-names = "mac-address";
 };
 
 &srab {
@@ -111,12 +125,3 @@
 		};
 	};
 };
-
-&gmac0 {
-	status = "disabled";
-};
-
-&gmac1 {
-	nvmem-cells = <&et1macaddr>;
-	nvmem-cell-names = "mac-address";
-};

diff --git a/src/arm/nvidia/tegra20-colibri.dtsi b/src/arm/nvidia/tegra20-colibri.dtsi
index 8c1d5c9..2ff7be8 100644
--- a/src/arm/nvidia/tegra20-colibri.dtsi
+++ b/src/arm/nvidia/tegra20-colibri.dtsi

@@ -445,9 +445,9 @@
 
 	tegra_ac97: ac97@70002000 {
 		status = "okay";
-		nvidia,codec-reset-gpio =
+		nvidia,codec-reset-gpios =
 			<&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-		nvidia,codec-sync-gpio =
+		nvidia,codec-sync-gpios =
 			<&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
 	};
 

diff --git a/src/arm/nvidia/tegra20-paz00.dts b/src/arm/nvidia/tegra20-paz00.dts
index afb922b..1408e1e 100644
--- a/src/arm/nvidia/tegra20-paz00.dts
+++ b/src/arm/nvidia/tegra20-paz00.dts

@@ -533,6 +533,49 @@
 					0x00000000 0x00000000 0x00000000 0x00000000>;
 			};
 		};
+
+		emc-tables@1 {
+			nvidia,ram-code = <0x1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			emc-table@166500 {
+				reg = <166500>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <166500>;
+				nvidia,emc-registers = <0x0000000a 0x00000016
+					0x00000008 0x00000003 0x00000004 0x00000004
+					0x00000002 0x0000000c 0x00000003 0x00000003
+					0x00000002 0x00000001 0x00000004 0x00000005
+					0x00000004 0x00000009 0x0000000d 0x000004df
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000003 0x00000001 0x0000000a 0x000000c8
+					0x00000003 0x00000006 0x00000004 0x00000008
+					0x00000002 0x00000000 0x00000000 0x00000002
+					0x00000000 0x00000000 0x00000083 0xe03b0323
+					0x007fe010 0x00001414 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@333000 {
+				reg = <333000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <333000>;
+				nvidia,emc-registers = <0x00000018 0x00000033
+					0x00000012 0x00000004 0x00000004 0x00000005
+					0x00000003 0x0000000c 0x00000006 0x00000006
+					0x00000003 0x00000001 0x00000004 0x00000005
+					0x00000004 0x00000009 0x0000000d 0x00000bff
+					0x00000000 0x00000003 0x00000003 0x00000006
+					0x00000006 0x00000001 0x00000011 0x000000c8
+					0x00000003 0x0000000e 0x00000007 0x00000008
+					0x00000002 0x00000000 0x00000000 0x00000002
+					0x00000000 0x00000000 0x00000083 0xf0440303
+					0x007fe010 0x00001414 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
 	};
 
 	usb@c5000000 {

diff --git a/src/arm/nxp/imx/e60k02.dtsi b/src/arm/nxp/imx/e60k02.dtsi
index dd03e38..13756d3 100644
--- a/src/arm/nxp/imx/e60k02.dtsi
+++ b/src/arm/nxp/imx/e60k02.dtsi

@@ -127,7 +127,7 @@
 		compatible = "ricoh,rc5t619";
 		reg = <0x32>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		system-power-controller;
 
 		regulators {

diff --git a/src/arm/nxp/imx/e70k02.dtsi b/src/arm/nxp/imx/e70k02.dtsi
index 4e1bf08..dcc3c9d 100644
--- a/src/arm/nxp/imx/e70k02.dtsi
+++ b/src/arm/nxp/imx/e70k02.dtsi

@@ -145,7 +145,7 @@
 		compatible = "ricoh,rc5t619";
 		reg = <0x32>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 		system-power-controller;
 
 		regulators {

diff --git a/src/arm/nxp/imx/imx27-phytec-phycard-s-som.dtsi b/src/arm/nxp/imx/imx27-phytec-phycard-s-som.dtsi
index abc9233..31b3fc9 100644
--- a/src/arm/nxp/imx/imx27-phytec-phycard-s-som.dtsi
+++ b/src/arm/nxp/imx/imx27-phytec-phycard-s-som.dtsi

@@ -15,6 +15,22 @@
 		device_type = "memory";
 		reg = <0xa0000000 0x08000000>; /* 128MB */
 	};
+
+	usbotgphy: usbotgphy {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgphy>;
+		reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+		#phy-cells = <0>;
+	};
+
+	usbh2phy: usbh2phy {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh2phy>;
+		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+		#phy-cells = <0>;
+	};
 };
 
 &cspi1 {
@@ -84,6 +100,52 @@
 				MX27_PAD_NFWE_B__NFWE_B 0x0
 			>;
 		};
+
+		pinctrl_usbotgphy: usbotgphygrp {
+			fsl,pins = <
+				MX27_PAD_USBH1_RCV__GPIO2_25		0x1 /* reset gpio */
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX27_PAD_USBOTG_CLK__USBOTG_CLK		0x0
+				MX27_PAD_USBOTG_DIR__USBOTG_DIR		0x0
+				MX27_PAD_USBOTG_NXT__USBOTG_NXT		0x0
+				MX27_PAD_USBOTG_STP__USBOTG_STP		0x0
+				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0	0x0
+				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1	0x0
+				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2	0x0
+				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3	0x0
+				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4	0x0
+				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5	0x0
+				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6	0x0
+				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7	0x0
+			>;
+		};
+
+		pinctrl_usbh2phy: usbh2phygrp {
+			fsl,pins = <
+				MX27_PAD_USBH1_SUSP__GPIO2_22		0x0 /* reset gpio */
+			>;
+		};
+
+		pinctrl_usbh2: usbh2grp {
+			fsl,pins = <
+				MX27_PAD_USBH2_CLK__USBH2_CLK		0x0
+				MX27_PAD_USBH2_DIR__USBH2_DIR		0x0
+				MX27_PAD_USBH2_NXT__USBH2_NXT		0x0
+				MX27_PAD_USBH2_STP__USBH2_STP		0x0
+				MX27_PAD_CSPI2_SCLK__USBH2_DATA0	0x0
+				MX27_PAD_CSPI2_MOSI__USBH2_DATA1	0x0
+				MX27_PAD_CSPI2_MISO__USBH2_DATA2	0x0
+				MX27_PAD_CSPI2_SS1__USBH2_DATA3		0x0
+				MX27_PAD_CSPI2_SS2__USBH2_DATA4		0x0
+				MX27_PAD_CSPI1_SS2__USBH2_DATA5		0x0
+				MX27_PAD_CSPI2_SS0__USBH2_DATA6		0x0
+				MX27_PAD_USBH2_DATA7__USBH2_DATA7	0x0
+			>;
+		};
 	};
 };
 
@@ -95,3 +157,19 @@
 	nand-on-flash-bbt;
 	status = "okay";
 };
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	phy_type = "ulpi";
+	phys = <&usbotgphy>;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	phy_type = "ulpi";
+	phys = <&usbh2phy>;
+	status = "okay";
+};

diff --git a/src/arm/nxp/imx/imx51-ts4800.dts b/src/arm/nxp/imx/imx51-ts4800.dts
index f740872..2bd0761 100644
--- a/src/arm/nxp/imx/imx51-ts4800.dts
+++ b/src/arm/nxp/imx/imx51-ts4800.dts

@@ -45,7 +45,7 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 78770>;
+		pwms = <&pwm1 0 78770 0>;
 		brightness-levels = <0 150 200 255>;
 		default-brightness-level = <1>;
 		power-supply = <&backlight_reg>;
@@ -113,7 +113,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm_backlight>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx53-kp-ddc.dts b/src/arm/nxp/imx/imx53-kp-ddc.dts
index 0e7f071..f6f1163 100644
--- a/src/arm/nxp/imx/imx53-kp-ddc.dts
+++ b/src/arm/nxp/imx/imx53-kp-ddc.dts

@@ -13,7 +13,7 @@
 
 	backlight_lcd: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
+		pwms = <&pwm2 0 50000 0>;
 		power-supply = <&reg_backlight>;
 		brightness-levels = <0 24 28 32 36
 				     40 44 48 52 56

diff --git a/src/arm/nxp/imx/imx53-kp.dtsi b/src/arm/nxp/imx/imx53-kp.dtsi
index 4508f34..ae5f87b 100644
--- a/src/arm/nxp/imx/imx53-kp.dtsi
+++ b/src/arm/nxp/imx/imx53-kp.dtsi

@@ -13,7 +13,7 @@
 		compatible = "pwm-beeper";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_buzzer>;
-		pwms = <&pwm1 0 500000>;
+		pwms = <&pwm1 0 500000 0>;
 	};
 
 	gpio-buttons {
@@ -162,14 +162,6 @@
 	>;
 };
 
-&pwm1 {
-	#pwm-cells = <2>;
-};
-
-&pwm2 {
-	#pwm-cells = <2>;
-};
-
 &uart1 {
 	status = "okay";
 };

diff --git a/src/arm/nxp/imx/imx53-m53evk.dts b/src/arm/nxp/imx/imx53-m53evk.dts
index c323b4d..1353d98 100644
--- a/src/arm/nxp/imx/imx53-m53evk.dts
+++ b/src/arm/nxp/imx/imx53-m53evk.dts

@@ -41,7 +41,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 3000>;
+		pwms = <&pwm1 0 3000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		power-supply = <&reg_backlight>;
@@ -313,7 +313,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx53-mba53.dts b/src/arm/nxp/imx/imx53-mba53.dts
index 6a37616..2117de8 100644
--- a/src/arm/nxp/imx/imx53-mba53.dts
+++ b/src/arm/nxp/imx/imx53-mba53.dts

@@ -17,7 +17,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
+		pwms = <&pwm2 0 50000 0>;
 		brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
 		default-brightness-level = <10>;
 		enable-gpios = <&gpio7 7 0>;

diff --git a/src/arm/nxp/imx/imx53-ppd.dts b/src/arm/nxp/imx/imx53-ppd.dts
index 70c4a48..e939acc 100644
--- a/src/arm/nxp/imx/imx53-ppd.dts
+++ b/src/arm/nxp/imx/imx53-ppd.dts

@@ -167,7 +167,7 @@
 
 	pwm_bl: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
+		pwms = <&pwm2 0 50000 0>;
 		brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35
 				     38 40 43 45 48 51 53 56 58 61 63 66 68 71
 				     73 76 79 81 84 86 89 91 94 96 99 102 104
@@ -187,7 +187,7 @@
 
 		led-1 {
 			label = "alarm-brightness";
-			pwms = <&pwm1 0 100000>;
+			pwms = <&pwm1 0 100000 0>;
 			max-brightness = <255>;
 		};
 	};
@@ -628,14 +628,12 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx53-qsb-common.dtsi b/src/arm/nxp/imx/imx53-qsb-common.dtsi
index d804404..05d7a46 100644
--- a/src/arm/nxp/imx/imx53-qsb-common.dtsi
+++ b/src/arm/nxp/imx/imx53-qsb-common.dtsi

@@ -85,7 +85,7 @@
 		};
 	};
 
-	panel {
+	panel_dpi: panel {
 		compatible = "sii,43wvf1g";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_display_power>;

diff --git a/src/arm/nxp/imx/imx53-qsb-hdmi.dtso b/src/arm/nxp/imx/imx53-qsb-hdmi.dtso
index c84e9b0..151e9ce 100644
--- a/src/arm/nxp/imx/imx53-qsb-hdmi.dtso
+++ b/src/arm/nxp/imx/imx53-qsb-hdmi.dtso

@@ -10,8 +10,6 @@
 /plugin/;
 
 &{/} {
-	/delete-node/ panel;
-
 	hdmi: connector-hdmi {
 		compatible = "hdmi-connector";
 		label = "hdmi";
@@ -82,6 +80,10 @@
 	};
 };
 
+&panel_dpi {
+	status = "disabled";
+};
+
 &tve {
 	status = "disabled";
 };

diff --git a/src/arm/nxp/imx/imx53-tqma53.dtsi b/src/arm/nxp/imx/imx53-tqma53.dtsi
index 294811b..b2d7271 100644
--- a/src/arm/nxp/imx/imx53-tqma53.dtsi
+++ b/src/arm/nxp/imx/imx53-tqma53.dtsi

@@ -202,14 +202,6 @@
 	};
 };
 
-&pwm1 {
-	#pwm-cells = <2>;
-};
-
-&pwm2 {
-	#pwm-cells = <2>;
-};
-
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;

diff --git a/src/arm/nxp/imx/imx6dl-aristainetos_4.dts b/src/arm/nxp/imx/imx6dl-aristainetos_4.dts
index cc861a4..a5ac793 100644
--- a/src/arm/nxp/imx/imx6dl-aristainetos_4.dts
+++ b/src/arm/nxp/imx/imx6dl-aristainetos_4.dts

@@ -14,7 +14,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		enable-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
@@ -79,6 +79,5 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	status = "okay";
 };

diff --git a/src/arm/nxp/imx/imx6dl-aristainetos_7.dts b/src/arm/nxp/imx/imx6dl-aristainetos_7.dts
index b6cb788..5a25bdb 100644
--- a/src/arm/nxp/imx/imx6dl-aristainetos_7.dts
+++ b/src/arm/nxp/imx/imx6dl-aristainetos_7.dts

@@ -49,7 +49,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 3000>;
+		pwms = <&pwm3 0 3000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		pinctrl-names = "default";
@@ -69,6 +69,5 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	status = "okay";
 };

diff --git a/src/arm/nxp/imx/imx6dl-mamoj.dts b/src/arm/nxp/imx/imx6dl-mamoj.dts
index 0289519..72ee236 100644
--- a/src/arm/nxp/imx/imx6dl-mamoj.dts
+++ b/src/arm/nxp/imx/imx6dl-mamoj.dts

@@ -21,7 +21,7 @@
 
 	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 25000>; /* 25000ns -> 40kHz */
+		pwms = <&pwm3 0 25000 0>; /* 25000ns -> 40kHz */
 		brightness-levels = <0 4 8 16 32 64 128 160 192 224 255>;
 		default-brightness-level = <7>;
 	};
@@ -303,7 +303,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6q-ba16.dtsi b/src/arm/nxp/imx/imx6q-ba16.dtsi
index f266f1b..09d9ca0 100644
--- a/src/arm/nxp/imx/imx6q-ba16.dtsi
+++ b/src/arm/nxp/imx/imx6q-ba16.dtsi

@@ -55,7 +55,7 @@
 		compatible = "pwm-backlight";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_display>;
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <  0   1   2   3   4   5   6   7   8   9
 				      10  11  12  13  14  15  16  17  18  19
 				      20  21  22  23  24  25  26  27  28  29
@@ -349,7 +349,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6q-bosch-acc.dts b/src/arm/nxp/imx/imx6q-bosch-acc.dts
index 0264880..d3f14b4 100644
--- a/src/arm/nxp/imx/imx6q-bosch-acc.dts
+++ b/src/arm/nxp/imx/imx6q-bosch-acc.dts

@@ -36,7 +36,7 @@
 
 	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 200000>;
+		pwms = <&pwm1 0 200000 0>;
 		brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>;
 		num-interpolated-steps = <10>;
 		default-brightness-level = <60>;
@@ -117,14 +117,14 @@
 			color = <LED_COLOR_ID_RED>;
 			max-brightness = <248>;
 			default-state = "off";
-			pwms = <&pwm2 0 500000>;
+			pwms = <&pwm2 0 500000 0>;
 		};
 
 		led_white: led-1 {
 			color = <LED_COLOR_ID_WHITE>;
 			max-brightness = <248>;
 			default-state = "off";
-			pwms = <&pwm3 0 500000>;
+			pwms = <&pwm3 0 500000 0>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
@@ -484,28 +484,24 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6q-kp.dtsi b/src/arm/nxp/imx/imx6q-kp.dtsi
index 091903f..c425d42 100644
--- a/src/arm/nxp/imx/imx6q-kp.dtsi
+++ b/src/arm/nxp/imx/imx6q-kp.dtsi

@@ -15,7 +15,7 @@
 / {
 	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 255>;
 		num-interpolated-steps = <255>;
 		default-brightness-level = <250>;
@@ -23,7 +23,7 @@
 
 	beeper {
 		compatible = "pwm-beeper";
-		pwms = <&pwm2 0 500000>;
+		pwms = <&pwm2 0 500000 0>;
 	};
 
 	lcd_display: display {
@@ -378,14 +378,12 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6q-novena.dts b/src/arm/nxp/imx/imx6q-novena.dts
index a7d5a68..d392b5b 100644
--- a/src/arm/nxp/imx/imx6q-novena.dts
+++ b/src/arm/nxp/imx/imx6q-novena.dts

@@ -67,7 +67,7 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 10000000>;
+		pwms = <&pwm1 0 10000000 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_backlight_novena>;
 		power-supply = <&reg_lvds_lcd>;
@@ -465,7 +465,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 

diff --git a/src/arm/nxp/imx/imx6q-pistachio.dts b/src/arm/nxp/imx/imx6q-pistachio.dts
index 46c6b96..56b77cc 100644
--- a/src/arm/nxp/imx/imx6q-pistachio.dts
+++ b/src/arm/nxp/imx/imx6q-pistachio.dts

@@ -124,7 +124,7 @@
 
 	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 50000>;
+		pwms = <&pwm1 0 50000 0>;
 		brightness-levels = <
 			0  /*1  2  3  4  5  6*/  7  8  9
 			10 11 12 13 14 15 16 17 18 19
@@ -571,7 +571,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6q-prti6q.dts b/src/arm/nxp/imx/imx6q-prti6q.dts
index 3508a2c..a7d5693 100644
--- a/src/arm/nxp/imx/imx6q-prti6q.dts
+++ b/src/arm/nxp/imx/imx6q-prti6q.dts

@@ -22,7 +22,7 @@
 		compatible = "pwm-backlight";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_backlight>;
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 16 64 255>;
 		num-interpolated-steps = <16>;
 		default-brightness-level = <1>;
@@ -292,7 +292,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6q-var-dt6customboard.dts b/src/arm/nxp/imx/imx6q-var-dt6customboard.dts
index 2290c12..0225a62 100644
--- a/src/arm/nxp/imx/imx6q-var-dt6customboard.dts
+++ b/src/arm/nxp/imx/imx6q-var-dt6customboard.dts

@@ -18,7 +18,7 @@
 
 	backlight_lvds: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
+		pwms = <&pwm2 0 50000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 248>;
 		default-brightness-level = <7>;
 		status = "okay";
@@ -203,7 +203,6 @@
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 

diff --git a/src/arm/nxp/imx/imx6qdl-apf6dev.dtsi b/src/arm/nxp/imx/imx6qdl-apf6dev.dtsi
index 338d292..3a46ade 100644
--- a/src/arm/nxp/imx/imx6qdl-apf6dev.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-apf6dev.dtsi

@@ -13,7 +13,7 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 191000>;
+		pwms = <&pwm3 0 191000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <0>;
 		power-supply = <&reg_5v>;
@@ -212,7 +212,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6qdl-aristainetos2.dtsi b/src/arm/nxp/imx/imx6qdl-aristainetos2.dtsi
index db1bc51..758eaf9 100644
--- a/src/arm/nxp/imx/imx6qdl-aristainetos2.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-aristainetos2.dtsi

@@ -46,7 +46,7 @@
 / {
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
@@ -346,7 +346,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6qdl-cubox-i.dtsi b/src/arm/nxp/imx/imx6qdl-cubox-i.dtsi
index 1e530d8..761566a 100644
--- a/src/arm/nxp/imx/imx6qdl-cubox-i.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-cubox-i.dtsi

@@ -64,7 +64,7 @@
 			active-low;
 			label = "imx6:red:front";
 			max-brightness = <248>;
-			pwms = <&pwm1 0 50000>;
+			pwms = <&pwm1 0 50000 0>;
 		};
 	};
 
@@ -233,7 +233,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 

diff --git a/src/arm/nxp/imx/imx6qdl-emcon.dtsi b/src/arm/nxp/imx/imx6qdl-emcon.dtsi
index 42b2ba2..a308a35 100644
--- a/src/arm/nxp/imx/imx6qdl-emcon.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-emcon.dtsi

@@ -66,7 +66,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_lvds_bl>;
 		enable-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
-		pwms = <&pwm1 0 50000>;
+		pwms = <&pwm1 0 50000 0>;
 		brightness-levels = <
 			0 4 8 16 32 64 80 96 112
 			128 144 160 176 250
@@ -78,7 +78,7 @@
 	pwm_fan: pwm-fan {
 		compatible = "pwm-fan";
 		#cooling-cells = <2>;
-		pwms = <&pwm4 0 50000>;
+		pwms = <&pwm4 0 50000 0>;
 		cooling-levels = <0 64 127 191 255>;
 		status = "disabled";
 	};
@@ -145,7 +145,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_rgb_bl>;
 		enable-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
-		pwms = <&pwm3 0 5000000>;
+		pwms = <&pwm3 0 5000000 0>;
 		brightness-levels = <
 			250 176 160 144 128 112
 			96 80 64 48 32 16 8 1
@@ -736,17 +736,14 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 

diff --git a/src/arm/nxp/imx/imx6qdl-gw52xx.dtsi b/src/arm/nxp/imx/imx6qdl-gw52xx.dtsi
index 535679c..48ffb3e 100644
--- a/src/arm/nxp/imx/imx6qdl-gw52xx.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-gw52xx.dtsi

@@ -25,7 +25,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
@@ -520,7 +520,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6qdl-gw53xx.dtsi b/src/arm/nxp/imx/imx6qdl-gw53xx.dtsi
index 3e1c572..1eae438 100644
--- a/src/arm/nxp/imx/imx6qdl-gw53xx.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-gw53xx.dtsi

@@ -25,7 +25,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
@@ -517,7 +517,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6qdl-gw54xx.dtsi b/src/arm/nxp/imx/imx6qdl-gw54xx.dtsi
index 0ffa035..c2ec857 100644
--- a/src/arm/nxp/imx/imx6qdl-gw54xx.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-gw54xx.dtsi

@@ -26,7 +26,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
@@ -570,7 +570,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default", "state_dio";
 	pinctrl-0 = <&pinctrl_pwm4_backlight>;
 	pinctrl-1 = <&pinctrl_pwm4_dio>;

diff --git a/src/arm/nxp/imx/imx6qdl-gw560x.dtsi b/src/arm/nxp/imx/imx6qdl-gw560x.dtsi
index 46cf408..7cee983 100644
--- a/src/arm/nxp/imx/imx6qdl-gw560x.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-gw560x.dtsi

@@ -66,7 +66,7 @@
 
 	backlight-display {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <
 			0  1  2  3  4  5  6  7  8  9
 			10 11 12 13 14 15 16 17 18 19
@@ -619,7 +619,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6qdl-gw5903.dtsi b/src/arm/nxp/imx/imx6qdl-gw5903.dtsi
index a74cde0..fbc704c 100644
--- a/src/arm/nxp/imx/imx6qdl-gw5903.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-gw5903.dtsi

@@ -56,7 +56,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <
 			0  1  2  3  4  5  6  7  8  9
 			10 11 12 13 14 15 16 17 18 19
@@ -502,7 +502,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6qdl-gw5904.dtsi b/src/arm/nxp/imx/imx6qdl-gw5904.dtsi
index 1e72380..0705062 100644
--- a/src/arm/nxp/imx/imx6qdl-gw5904.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-gw5904.dtsi

@@ -70,7 +70,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
@@ -586,7 +586,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6qdl-icore.dtsi b/src/arm/nxp/imx/imx6qdl-icore.dtsi
index efe1152..9975b6e 100644
--- a/src/arm/nxp/imx/imx6qdl-icore.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-icore.dtsi

@@ -20,7 +20,7 @@
 
 	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 100000>;
+		pwms = <&pwm3 0 100000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
@@ -245,7 +245,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6qdl-mba6.dtsi b/src/arm/nxp/imx/imx6qdl-mba6.dtsi
index 4d2abcd..60aa1e9 100644
--- a/src/arm/nxp/imx/imx6qdl-mba6.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-mba6.dtsi

@@ -298,6 +298,7 @@
 		reg = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		vdd-supply = <&reg_mba6_3p3v>;
 
 		ethernet@1 {
 			compatible = "usb424,9e00";
@@ -441,8 +442,6 @@
 
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
-			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099
-
 			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099
 			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b099
 			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b099

diff --git a/src/arm/nxp/imx/imx6qdl-nit6xlite.dtsi b/src/arm/nxp/imx/imx6qdl-nit6xlite.dtsi
index f2542d7..a30cf0d 100644
--- a/src/arm/nxp/imx/imx6qdl-nit6xlite.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-nit6xlite.dtsi

@@ -108,7 +108,7 @@
 
 	backlight-lcd {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -117,7 +117,7 @@
 
 	backlight_lvds0: backlight-lvds0 {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -499,7 +499,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -512,7 +511,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6qdl-nitrogen6_max.dtsi b/src/arm/nxp/imx/imx6qdl-nitrogen6_max.dtsi
index 32a110a..33174fe 100644
--- a/src/arm/nxp/imx/imx6qdl-nitrogen6_max.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-nitrogen6_max.dtsi

@@ -183,7 +183,7 @@
 
 	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -192,7 +192,7 @@
 
 	backlight_lvds0: backlight-lvds0 {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -201,7 +201,7 @@
 
 	backlight_lvds1: backlight-lvds1 {
 		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 5000000>;
+		pwms = <&pwm2 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -735,14 +735,12 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
@@ -755,7 +753,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6qdl-nitrogen6_som2.dtsi b/src/arm/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
index 414196b..8e64314 100644
--- a/src/arm/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-nitrogen6_som2.dtsi

@@ -17,7 +17,7 @@
 
 	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -26,7 +26,7 @@
 
 	backlight_lvds0: backlight-lvds0 {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -641,7 +641,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -654,7 +653,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6qdl-nitrogen6x.dtsi b/src/arm/nxp/imx/imx6qdl-nitrogen6x.dtsi
index f278b14..1211772 100644
--- a/src/arm/nxp/imx/imx6qdl-nitrogen6x.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-nitrogen6x.dtsi

@@ -134,7 +134,7 @@
 
 	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -143,7 +143,7 @@
 
 	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -596,7 +596,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -609,7 +608,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6qdl-phytec-mira.dtsi b/src/arm/nxp/imx/imx6qdl-phytec-mira.dtsi
index 1ca4d21..0b4c09b 100644
--- a/src/arm/nxp/imx/imx6qdl-phytec-mira.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-phytec-mira.dtsi

@@ -15,7 +15,7 @@
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_backlight>;
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		status = "okay";
 	};
 
@@ -224,7 +224,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6qdl-sabreauto.dtsi b/src/arm/nxp/imx/imx6qdl-sabreauto.dtsi
index 68e9718..6656e2e 100644
--- a/src/arm/nxp/imx/imx6qdl-sabreauto.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-sabreauto.dtsi

@@ -144,8 +144,8 @@
 	};
 
 	sound-spdif {
-		compatible = "fsl,imx-audio-spdif",
-			   "fsl,imx-sabreauto-spdif";
+		compatible = "fsl,imx-sabreauto-spdif",
+			     "fsl,imx-audio-spdif";
 		model = "imx-spdif";
 		spdif-controller = <&spdif>;
 		spdif-in;
@@ -153,7 +153,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 5000000>;
+		pwms = <&pwm3 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		status = "okay";
@@ -802,7 +802,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6qdl-sabrelite.dtsi b/src/arm/nxp/imx/imx6qdl-sabrelite.dtsi
index 84c8a95..9c502bf 100644
--- a/src/arm/nxp/imx/imx6qdl-sabrelite.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-sabrelite.dtsi

@@ -99,7 +99,7 @@
 		#clock-cells = <0>;
 		clock-frequency = <22000000>;
 		clock-output-names = "mipi_pwm3";
-		pwms = <&pwm3 0 45>; /* 1 / 45 ns = 22 MHz */
+		pwms = <&pwm3 0 45 0>; /* 1 / 45 ns = 22 MHz */
 		status = "okay";
 	};
 
@@ -162,7 +162,7 @@
 
 	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -171,7 +171,7 @@
 
 	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -654,21 +654,18 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6qdl-sabresd.dtsi b/src/arm/nxp/imx/imx6qdl-sabresd.dtsi
index 4fe5876..8f4f5fb 100644
--- a/src/arm/nxp/imx/imx6qdl-sabresd.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-sabresd.dtsi

@@ -119,7 +119,7 @@
 
 	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		status = "okay";
@@ -755,7 +755,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6qdl-savageboard.dtsi b/src/arm/nxp/imx/imx6qdl-savageboard.dtsi
index 02e6d36..6823a63 100644
--- a/src/arm/nxp/imx/imx6qdl-savageboard.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-savageboard.dtsi

@@ -83,7 +83,7 @@
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <4>;
 		power-supply = <&reg_3p3v>;
-		pwms = <&pwm1 0 10000>;
+		pwms = <&pwm1 0 10000 0>;
 	};
 
 	reg_3p3v: regulator-3p3v {
@@ -140,7 +140,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6qdl-skov-cpu.dtsi b/src/arm/nxp/imx/imx6qdl-skov-cpu.dtsi
index d59d5d0..6ab71a7 100644
--- a/src/arm/nxp/imx/imx6qdl-skov-cpu.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-skov-cpu.dtsi

@@ -282,7 +282,6 @@
 &pwm2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
-	#pwm-cells = <2>;
 	status = "okay";
 };
 

diff --git a/src/arm/nxp/imx/imx6qdl-udoo.dtsi b/src/arm/nxp/imx/imx6qdl-udoo.dtsi
index 647ba5e..14272b4 100644
--- a/src/arm/nxp/imx/imx6qdl-udoo.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-udoo.dtsi

@@ -59,16 +59,6 @@
 		};
 	};
 
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
-		gpio = <&gpio7 12 0>;
-	};
-
 	reg_panel: regulator-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "lcd_panel";
@@ -285,9 +275,18 @@
 &usbh1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbh>;
-	vbus-supply = <&reg_usb_h1_vbus>;
-	clocks = <&clks IMX6QDL_CLK_CKO>;
-	status = "disabled";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	usb-port@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &usbotg {

diff --git a/src/arm/nxp/imx/imx6qdl.dtsi b/src/arm/nxp/imx/imx6qdl.dtsi
index 8431b8a..d2200c9 100644
--- a/src/arm/nxp/imx/imx6qdl.dtsi
+++ b/src/arm/nxp/imx/imx6qdl.dtsi

@@ -397,11 +397,10 @@
 					reg = <0x02024000 0x4000>;
 					interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6QDL_CLK_ESAI_IPG>,
-						 <&clks IMX6QDL_CLK_ESAI_MEM>,
 						 <&clks IMX6QDL_CLK_ESAI_EXTAL>,
 						 <&clks IMX6QDL_CLK_ESAI_IPG>,
 						 <&clks IMX6QDL_CLK_SPBA>;
-					clock-names = "core", "mem", "extal", "fsys", "spba";
+					clock-names = "core", "extal", "fsys", "spba";
 					dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
 					dma-names = "rx", "tx";
 					status = "disabled";

diff --git a/src/arm/nxp/imx/imx6sl-evk.dts b/src/arm/nxp/imx/imx6sl-evk.dts
index 239bc6d..31eee04 100644
--- a/src/arm/nxp/imx/imx6sl-evk.dts
+++ b/src/arm/nxp/imx/imx6sl-evk.dts

@@ -23,7 +23,7 @@
 
 	backlight_display: backlight_display {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 	};
@@ -584,10 +584,8 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
 };
 
 &reg_vdd1p1 {

diff --git a/src/arm/nxp/imx/imx6sl-tolino-shine2hd.dts b/src/arm/nxp/imx/imx6sl-tolino-shine2hd.dts
index 5636fb3..03d6965 100644
--- a/src/arm/nxp/imx/imx6sl-tolino-shine2hd.dts
+++ b/src/arm/nxp/imx/imx6sl-tolino-shine2hd.dts

@@ -138,7 +138,7 @@
 		pinctrl-0 = <&pinctrl_zforce>;
 		reg = <0x50>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
 		vdd-supply = <&ldo1_reg>;
 		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
 		touchscreen-size-x = <1072>;
@@ -163,7 +163,7 @@
 		pinctrl-0 = <&pinctrl_ricoh_gpio>;
 		reg = <0x32>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		system-power-controller;
 
 		regulators {

diff --git a/src/arm/nxp/imx/imx6sll-evk.dts b/src/arm/nxp/imx/imx6sll-evk.dts
index e3e9b0e..febc2dd 100644
--- a/src/arm/nxp/imx/imx6sll-evk.dts
+++ b/src/arm/nxp/imx/imx6sll-evk.dts

@@ -26,7 +26,7 @@
 
 	backlight_display: backlight-display {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
@@ -314,10 +314,8 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
 };
 
 &snvs_poweroff {

diff --git a/src/arm/nxp/imx/imx6sll.dtsi b/src/arm/nxp/imx/imx6sll.dtsi
index 3659fd5..ddeb5b3 100644
--- a/src/arm/nxp/imx/imx6sll.dtsi
+++ b/src/arm/nxp/imx/imx6sll.dtsi

@@ -683,7 +683,6 @@
 				clocks = <&clks IMX6SLL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
-				fsl,anatop = <&anatop>;
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;
 				rx-burst-size-dword = <0x10>;

diff --git a/src/arm/nxp/imx/imx6sx-nitrogen6sx.dts b/src/arm/nxp/imx/imx6sx-nitrogen6sx.dts
index cd9cbc9..1c1515a 100644
--- a/src/arm/nxp/imx/imx6sx-nitrogen6sx.dts
+++ b/src/arm/nxp/imx/imx6sx-nitrogen6sx.dts

@@ -18,7 +18,7 @@
 
 	backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		power-supply = <&reg_3p3v>;
@@ -83,7 +83,7 @@
 	sound {
 		compatible = "fsl,imx-audio-sgtl5000";
 		model = "imx6sx-nitrogen6sx-sgtl5000";
-		cpu-dai = <&ssi1>;
+		ssi-controller = <&ssi1>;
 		audio-codec = <&codec>;
 		audio-routing =
 			"MIC_IN", "Mic Jack",
@@ -229,10 +229,8 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
 };
 
 &ssi1 {

diff --git a/src/arm/nxp/imx/imx6sx-sdb.dtsi b/src/arm/nxp/imx/imx6sx-sdb.dtsi
index c6e85e4..7d4170c 100644
--- a/src/arm/nxp/imx/imx6sx-sdb.dtsi
+++ b/src/arm/nxp/imx/imx6sx-sdb.dtsi

@@ -23,7 +23,7 @@
 
 	backlight_display: backlight-display {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 5000000>;
+		pwms = <&pwm3 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 	};
@@ -184,8 +184,8 @@
 	};
 
 	sound-spdif {
-		compatible = "fsl,imx-audio-spdif",
-			   "fsl,imx6sx-sdb-spdif";
+		compatible = "fsl,imx6sx-sdb-spdif",
+			     "fsl,imx-audio-spdif";
 		model = "imx-spdif";
 		spdif-controller = <&spdif>;
 		spdif-out;
@@ -295,10 +295,8 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
 };
 
 &snvs_poweroff {

diff --git a/src/arm/nxp/imx/imx6sx-softing-vining-2000.dts b/src/arm/nxp/imx/imx6sx-softing-vining-2000.dts
index bfcd8f7..f999eb2 100644
--- a/src/arm/nxp/imx/imx6sx-softing-vining-2000.dts
+++ b/src/arm/nxp/imx/imx6sx-softing-vining-2000.dts

@@ -46,19 +46,19 @@
 		led-1 {
 			label = "red";
 			max-brightness = <255>;
-			pwms = <&pwm6 0 50000>;
+			pwms = <&pwm6 0 50000 0>;
 		};
 
 		led-2 {
 			label = "green";
 			max-brightness = <255>;
-			pwms = <&pwm2 0 50000>;
+			pwms = <&pwm2 0 50000 0>;
 		};
 
 		led-3 {
 			label = "blue";
 			max-brightness = <255>;
-			pwms = <&pwm1 0 50000>;
+			pwms = <&pwm1 0 50000 0>;
 		};
 	};
 };
@@ -505,24 +505,18 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
 };
 
 &pwm6 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm6>;
-	status = "okay";
 };
 
 &reg_arm {

diff --git a/src/arm/nxp/imx/imx6sx.dtsi b/src/arm/nxp/imx/imx6sx.dtsi
index 0de359d..b386448 100644
--- a/src/arm/nxp/imx/imx6sx.dtsi
+++ b/src/arm/nxp/imx/imx6sx.dtsi

@@ -339,15 +339,14 @@
 				};
 
 				esai: esai@2024000 {
-					compatible = "fsl,imx6sx-esai", "fsl,imx35-esai";
+					compatible = "fsl,imx35-esai";
 					reg = <0x02024000 0x4000>;
 					interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
-						 <&clks IMX6SX_CLK_ESAI_MEM>,
 						 <&clks IMX6SX_CLK_ESAI_EXTAL>,
 						 <&clks IMX6SX_CLK_ESAI_IPG>,
 						 <&clks IMX6SX_CLK_SPBA>;
-					clock-names = "core", "mem", "extal",
+					clock-names = "core", "extal",
 						      "fsys", "spba";
 					dmas = <&sdma 23 21 0>,
 					       <&sdma 24 21 0>;
@@ -929,7 +928,6 @@
 				clocks = <&clks IMX6SX_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
-				fsl,anatop = <&anatop>;
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;
 				rx-burst-size-dword = <0x10>;
@@ -957,7 +955,6 @@
 				fsl,usbphy = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc 2>;
 				phy_type = "hsic";
-				fsl,anatop = <&anatop>;
 				dr_mode = "host";
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;

diff --git a/src/arm/nxp/imx/imx6ul-14x14-evk.dtsi b/src/arm/nxp/imx/imx6ul-14x14-evk.dtsi
index f10f052..9cfb99a 100644
--- a/src/arm/nxp/imx/imx6ul-14x14-evk.dtsi
+++ b/src/arm/nxp/imx/imx6ul-14x14-evk.dtsi

@@ -16,7 +16,7 @@
 
 	backlight_display: backlight-display {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
@@ -277,7 +277,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6ul-ccimx6ulsbcpro.dts b/src/arm/nxp/imx/imx6ul-ccimx6ulsbcpro.dts
index 1762bc4..ed61ae8 100644
--- a/src/arm/nxp/imx/imx6ul-ccimx6ulsbcpro.dts
+++ b/src/arm/nxp/imx/imx6ul-ccimx6ulsbcpro.dts

@@ -18,7 +18,7 @@
 
 	lcd_backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm5 0 50000>;
+		pwms = <&pwm5 0 50000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
@@ -168,7 +168,6 @@
 };
 
 &pwm5 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm5>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6ul-geam.dts b/src/arm/nxp/imx/imx6ul-geam.dts
index 2ca18f3..cdbb8c4 100644
--- a/src/arm/nxp/imx/imx6ul-geam.dts
+++ b/src/arm/nxp/imx/imx6ul-geam.dts

@@ -21,7 +21,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm8 0 100000>;
+		pwms = <&pwm8 0 100000 0>;
 		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
 				     10 11 12 13 14 15 16 17 18 19
 				     20 21 22 23 24 25 26 27 28 29
@@ -194,7 +194,6 @@
 };
 
 &pwm8 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm8>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi b/src/arm/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
index af337f1..be3cacb 100644
--- a/src/arm/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
+++ b/src/arm/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi

@@ -9,7 +9,7 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 191000>;
+		pwms = <&pwm3 0 191000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_5v>;
@@ -143,7 +143,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6ul-isiot.dtsi b/src/arm/nxp/imx/imx6ul-isiot.dtsi
index 14fc482..ee86c36 100644
--- a/src/arm/nxp/imx/imx6ul-isiot.dtsi
+++ b/src/arm/nxp/imx/imx6ul-isiot.dtsi

@@ -20,7 +20,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm8 0 100000>;
+		pwms = <&pwm8 0 100000 0>;
 		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
 				     10 11 12 13 14 15 16 17 18 19
 				     20 21 22 23 24 25 26 27 28 29
@@ -187,7 +187,6 @@
 };
 
 &pwm8 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm8>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6ul-kontron-bl-43.dts b/src/arm/nxp/imx/imx6ul-kontron-bl-43.dts
index 0c64370..4e8191a 100644
--- a/src/arm/nxp/imx/imx6ul-kontron-bl-43.dts
+++ b/src/arm/nxp/imx/imx6ul-kontron-bl-43.dts

@@ -14,7 +14,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm7 0 5000000>;
+		pwms = <&pwm7 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
@@ -41,7 +41,6 @@
 };
 
 &pwm7 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm7>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6ul-kontron-bl-common.dtsi b/src/arm/nxp/imx/imx6ul-kontron-bl-common.dtsi
index 33d5f27..d8f7877 100644
--- a/src/arm/nxp/imx/imx6ul-kontron-bl-common.dtsi
+++ b/src/arm/nxp/imx/imx6ul-kontron-bl-common.dtsi

@@ -35,7 +35,7 @@
 
 	pwm-beeper {
 		compatible = "pwm-beeper";
-		pwms = <&pwm8 0 5000>;
+		pwms = <&pwm8 0 5000 0>;
 	};
 
 	reg_3v3: regulator-3v3 {
@@ -152,7 +152,6 @@
 };
 
 &pwm8 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm8>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6ul-pico.dtsi b/src/arm/nxp/imx/imx6ul-pico.dtsi
index 07dcecb..fe307f4 100644
--- a/src/arm/nxp/imx/imx6ul-pico.dtsi
+++ b/src/arm/nxp/imx/imx6ul-pico.dtsi

@@ -22,7 +22,7 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 5000000>;
+		pwms = <&pwm3 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
@@ -177,7 +177,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";

diff --git a/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dts b/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dts
new file mode 100644
index 0000000..cfcd878
--- /dev/null
+++ b/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dts

@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Linumiz
+ * Author: Parthiban <parthiban@linumiz.com>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-seeed-npi.dtsi"
+#include "imx6ull-seeed-npi-dev-board.dtsi"
+
+/ {
+	model = "Seeed NPi iMX6ULL Dev Board with NAND";
+	compatible = "seeed,imx6ull-seeed-npi-emmc", "seeed,imx6ull-seeed-npi", "fsl,imx6ull";
+};
+
+&usdhc2 {
+	status = "okay";
+};

diff --git a/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dts b/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dts
new file mode 100644
index 0000000..87c9434
--- /dev/null
+++ b/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dts

@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Linumiz
+ * Author: Parthiban <parthiban@linumiz.com>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-seeed-npi.dtsi"
+#include "imx6ull-seeed-npi-dev-board.dtsi"
+
+/ {
+	model = "Seeed NPi iMX6ULL Dev Board with NAND";
+	compatible = "seeed,imx6ull-seeed-npi-nand", "seeed,imx6ull-seeed-npi", "fsl,imx6ull";
+};
+
+&gpmi {
+	status = "okay";
+};

diff --git a/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi b/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi
new file mode 100644
index 0000000..6bb12e0
--- /dev/null
+++ b/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi

@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Linumiz
+ * Author: Parthiban <parthiban@linumiz.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_buttons: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_button>;
+
+		button-0 {
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+			label = "SW2";
+			linux,code = <KEY_A>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-blue {
+			gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+			label = "LED_B";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+
+		led-green {
+			gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+			label = "LED_G";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+
+		led-red {
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			label = "LED_R";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+
+		led-user {
+			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+			label = "User";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+	};
+
+	reg_5v_sys: regulator-5v-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_5v_sys>;
+	};
+
+	reg_3v3_in: regulator-3v3-in {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_IN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_5v_sys>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_3v3_in>;
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vmmc>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_3v3>;
+	};
+};
+
+&csi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_csi1>;
+	status = "disabled"; /* LED Blue & Green shared */
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&lcdif {
+	pinctrl-0 = <&pinctrl_lcdif>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&reg_dcdc_3v3 {
+	vin-supply = <&reg_3v3_in>;
+};
+
+&sai2 {
+	assigned-clock-rates = <320000000>;
+	assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>;
+	pinctrl-0 = <&pinctrl_sai2>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_usdhc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_usdhc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_usdhc1_cd>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_button: buttongrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x0b0b0
+		>;
+	};
+
+	pinctrl_csi1: csi1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK	0x1b088
+			MX6UL_PAD_CSI_VSYNC__CSI_VSYNC		0x1b088
+			MX6UL_PAD_CSI_HSYNC__CSI_HSYNC		0x1b088
+			MX6UL_PAD_CSI_DATA00__CSI_DATA02	0x1b088
+			MX6UL_PAD_CSI_DATA01__CSI_DATA03	0x1b088
+			MX6UL_PAD_CSI_DATA02__CSI_DATA04	0x1b088
+			MX6UL_PAD_CSI_DATA03__CSI_DATA05	0x1b088
+			MX6UL_PAD_CSI_DATA04__CSI_DATA06	0x1b088
+			MX6UL_PAD_CSI_DATA05__CSI_DATA07	0x1b088
+			MX6UL_PAD_CSI_DATA06__CSI_DATA08	0x1b088
+			MX6UL_PAD_CSI_DATA07__CSI_DATA09	0x1b088
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER      0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b031
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC         0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO        0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN      0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER      0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN      0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2  0x4001b031
+		>;
+	};
+
+	pinctrl_gpio_leds: ledgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x0b0b0
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x0b0b0
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x0b0b0
+		>;
+	};
+
+	pinctrl_lcdif: lcdif-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+			MX6UL_PAD_LCD_RESET__LCDIF_RESET	0x79
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x79
+		>;
+	};
+
+	pinctrl_reg_vmmc: usdhc1regvmmc {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x17059
+		>;
+	};
+
+	pinctrl_sai2: sai2-grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pin = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pin = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pin = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pin = <
+			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pin = <
+			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pin = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc1_cd: usdhc1cd {
+		fsl,pins = <
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+		>;
+	};
+};

diff --git a/src/arm/nxp/imx/imx6ull-seeed-npi.dtsi b/src/arm/nxp/imx/imx6ull-seeed-npi.dtsi
new file mode 100644
index 0000000..f5ad6b5
--- /dev/null
+++ b/src/arm/nxp/imx/imx6ull-seeed-npi.dtsi

@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Linumiz
+ * Author: Parthiban <parthiban@linumiz.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Seeed NPi-iMX6ULL Dev Board";
+	compatible = "seeed,imx6ull-seeed-npi", "fsl,imx6ull";
+
+	reg_dcdc_3v3: regulator-dcdc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "DCDC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_dram_1v35: regulator-dram-1v35 {
+		compatible = "regulator-fixed";
+		regulator-name = "DRAM_1V35";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&reg_dcdc_3v3>;
+	};
+
+	reg_vdd_arm_soc_in: regulator-vdd-arm-soc-in {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_ARM_SOC_IN";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		vin-supply = <&reg_dcdc_3v3>;
+	};
+
+	reg_dcdc_1v8: regulator-dcdc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "DCDC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&reg_dcdc_3v3>;
+	};
+
+	reg_sd1_vqmmc: regulator-sd1-vqmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "NVCC_SD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vqmmc>;
+		regulator-always-on;
+		vin-supply = <&reg_dcdc_1v8>;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "disabled";
+};
+
+&usdhc1 {
+	vqmmc-supply = <&reg_sd1_vqmmc>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	keep-power-in-suspend;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DQS__RAWNAND_DQS		0x0b0b1
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x0b0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0x0b0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x0b000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x0b0b1
+			MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B	0x0b0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x0b0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x0b0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x0b0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x0b0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x0b0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x0b0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x0b0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x0b0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06   0x0b0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_reg_vqmmc: usdhc1regvqmmc {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170b9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170b9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170b9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
+		>;
+	};
+};

diff --git a/src/arm/nxp/imx/imx6ull-tarragon-master.dts b/src/arm/nxp/imx/imx6ull-tarragon-master.dts
index 67007ce..f9bbd58 100644
--- a/src/arm/nxp/imx/imx6ull-tarragon-master.dts
+++ b/src/arm/nxp/imx/imx6ull-tarragon-master.dts

@@ -45,7 +45,7 @@
 		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
 		spi-cpha;
 		spi-cpol;
-		spi-max-frequency = <16000000>;
+		spi-max-frequency = <12000000>;
 	};
 };
 
@@ -63,7 +63,7 @@
 		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
 		spi-cpha;
 		spi-cpol;
-		spi-max-frequency = <16000000>;
+		spi-max-frequency = <12000000>;
 	};
 };
 

diff --git a/src/arm/nxp/imx/imx6ull-tarragon-slave.dts b/src/arm/nxp/imx/imx6ull-tarragon-slave.dts
index cee223b..ef06619 100644
--- a/src/arm/nxp/imx/imx6ull-tarragon-slave.dts
+++ b/src/arm/nxp/imx/imx6ull-tarragon-slave.dts

@@ -23,7 +23,7 @@
 		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
 		spi-cpha;
 		spi-cpol;
-		spi-max-frequency = <16000000>;
+		spi-max-frequency = <12000000>;
 	};
 };
 

diff --git a/src/arm/nxp/imx/imx6ull-tarragon-slavext.dts b/src/arm/nxp/imx/imx6ull-tarragon-slavext.dts
index 7fd53b7..83db65b 100644
--- a/src/arm/nxp/imx/imx6ull-tarragon-slavext.dts
+++ b/src/arm/nxp/imx/imx6ull-tarragon-slavext.dts

@@ -45,7 +45,7 @@
 		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
 		spi-cpha;
 		spi-cpol;
-		spi-max-frequency = <16000000>;
+		spi-max-frequency = <12000000>;
 	};
 };
 

diff --git a/src/arm/nxp/imx/imx6ull-uti260b.dts b/src/arm/nxp/imx/imx6ull-uti260b.dts
new file mode 100644
index 0000000..e4576d5
--- /dev/null
+++ b/src/arm/nxp/imx/imx6ull-uti260b.dts

@@ -0,0 +1,566 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) 2022-2024 Sebastian Reichel <sre@kernel.org>
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "UNI-T UTi260B Thermal Camera";
+	compatible = "uni-t,uti260b", "fsl,imx6ull";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	panel_backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		enable-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_backlight_enable>;
+		power-supply = <&reg_vsd>;
+		pwms = <&pwm1 0 50000 0>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		/* generic 26650 battery */
+		device-chemistry = "lithium-ion";
+		charge-full-design-microamp-hours = <5000000>;
+		voltage-max-design-microvolt = <4200000>;
+		voltage-min-design-microvolt = <3300000>;
+	};
+
+	tp5000: charger {
+		compatible = "gpio-charger";
+		charger-type = "usb-sdp";
+		gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_charger_stat1>;
+	};
+
+	fuel-gauge {
+		compatible = "adc-battery";
+		charged-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		io-channel-names = "voltage";
+		io-channels = <&adc1 7>;
+		monitored-battery = <&battery>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_charger_stat2>;
+		power-supplies = <&tp5000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_gpio_keys>;
+		autorepeat;
+
+		up-key {
+			label = "Up";
+			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_UP>;
+		};
+
+		down-key {
+			label = "Down";
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_DOWN>;
+		};
+
+		left-key {
+			label = "Left";
+			gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LEFT>;
+		};
+
+		right-key {
+			label = "Right";
+			gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RIGHT>;
+		};
+
+		ok-key {
+			label = "Ok";
+			gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+		};
+
+		return-key {
+			label = "Return";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ESC>;
+		};
+
+		play-key {
+			label = "Media";
+			gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MEDIA>;
+		};
+
+		trigger-key {
+			label = "Trigger";
+			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_TRIGGER>;
+		};
+
+		power-key {
+			label = "Power";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		light-key {
+			label = "Light";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LIGHTS_TOGGLE>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_led_ctrl>;
+
+		led {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_FLASH;
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_poweroff>;
+	};
+
+	reg_vref: regulator-vref-4v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VREF_4V2";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+	};
+
+	reg_vsd: regulator-vsd {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc1 {
+	#io-channel-cells = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_adc>;
+	vref-supply = <&reg_vref>;
+	status = "okay";
+};
+
+&csi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_csi>;
+	status = "okay";
+
+	port {
+		parallel_from_gc0308: endpoint {
+			remote-endpoint = <&gc0308_to_parallel>;
+		};
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_spi3>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "inanbo,t28cp45tn89-v17";
+		reg = <0>;
+		backlight = <&panel_backlight>;
+		power-supply = <&reg_vsd>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <1000000>;
+		spi-rx-bus-width = <0>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&gpio1 {
+	ir-reset-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_LOW>;
+		line-name = "ir-reset-gpio";
+		output-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_ir_reset>;
+	};
+};
+
+&gpio2 {
+	/* configuring this to output-high results in poweroff */
+	power-en-hog {
+		gpio-hog;
+		gpios = <6 GPIO_ACTIVE_HIGH>;
+		line-name = "power-en-gpio";
+		output-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_poweroff2>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_i2c1>;
+	status = "okay";
+
+	camera@21 {
+		compatible = "galaxycore,gc0308";
+		reg = <0x21>;
+		clocks = <&clks IMX6UL_CLK_CSI>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_gc0308>;
+		powerdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		vdd28-supply = <&reg_vsd>;
+
+		port {
+			gc0308_to_parallel: endpoint {
+				remote-endpoint = <&parallel_from_gc0308>;
+				bus-width = <8>;
+				data-shift = <2>; /* lines 9:2 are used */
+				hsync-active = <1>; /* active high */
+				vsync-active = <1>; /* active high */
+				data-active = <1>; /* active high */
+				pclk-sample = <1>; /* sample on rising edge */
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_i2c2>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&lcdif {
+	assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_lcd_data>, <&mux_lcd_ctrl>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_pwm>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_uart>;
+	status = "okay";
+};
+
+&usbotg1 {
+	/* USB-C connector */
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	/* thermal sensor */
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usdhc1 {
+	/* MicroSD */
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&mux_sdhc1>, <&mux_sdhc1_cd>;
+	pinctrl-1 = <&mux_sdhc1_100mhz>, <&mux_sdhc1_cd>;
+	pinctrl-2 = <&mux_sdhc1_200mhz>, <&mux_sdhc1_cd>;
+	wakeup-source;
+	vmmc-supply = <&reg_vsd>;
+	status = "okay";
+};
+
+&usdhc2 {
+	/* eMMC */
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_sdhc2>;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_wdog>;
+};
+
+&iomuxc {
+	mux_adc: adcgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__GPIO1_IO07		0xb0
+		>;
+	};
+
+	mux_backlight_enable: blenablegrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09		0x3008
+		>;
+	};
+
+	mux_charger_stat1: charger1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01		0x3008
+		>;
+	};
+
+	mux_charger_stat2: charger2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02		0x3008
+		>;
+	};
+
+	mux_csi: csi1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK		0x1b088
+			MX6UL_PAD_CSI_VSYNC__CSI_VSYNC			0x1b088
+			MX6UL_PAD_CSI_HSYNC__CSI_HSYNC			0x1b088
+			MX6UL_PAD_CSI_DATA00__CSI_DATA02		0x1b088
+			MX6UL_PAD_CSI_DATA01__CSI_DATA03		0x1b088
+			MX6UL_PAD_CSI_DATA02__CSI_DATA04		0x1b088
+			MX6UL_PAD_CSI_DATA03__CSI_DATA05		0x1b088
+			MX6UL_PAD_CSI_DATA04__CSI_DATA06		0x1b088
+			MX6UL_PAD_CSI_DATA05__CSI_DATA07		0x1b088
+			MX6UL_PAD_CSI_DATA06__CSI_DATA08		0x1b088
+			MX6UL_PAD_CSI_DATA07__CSI_DATA09		0x1b088
+		>;
+	};
+
+	mux_gc0308: gc0308grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__CSI_MCLK			0x1e038
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05		0x1b088
+			MX6UL_PAD_GPIO1_IO06__GPIO1_IO06		0x1b088
+		>;
+	};
+
+	mux_gpio_keys: gpiokeygrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11		0x3008
+			MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12		0x3008
+			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13		0x3008
+			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10		0x3008
+			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09		0x3008
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15		0x3008
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08		0x3008
+			MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14		0x3008
+			MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03		0x3008
+			MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01		0x3008
+		>;
+	};
+
+	mux_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL		0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA		0x4001b8b0
+		>;
+	};
+
+	mux_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL		0x4001f8a8
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA		0x4001f8a8
+		>;
+	};
+
+	mux_ir_reset: irresetgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03		0x3008
+		>;
+	};
+
+	mux_lcd_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK			0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE		0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC		0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC		0x79
+		>;
+	};
+
+	mux_lcd_data: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00		0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01		0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02		0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03		0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04		0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05		0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06		0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07		0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08		0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09		0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10		0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11		0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12		0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13		0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14		0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15		0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16		0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17		0x79
+		>;
+	};
+
+	mux_led_ctrl: ledctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02		0x3008
+		>;
+	};
+
+	mux_poweroff: poweroffgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04		0x3008
+		>;
+	};
+
+	mux_poweroff2: poweroff2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06		0x3008
+		>;
+	};
+
+	mux_pwm: pwm1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__PWM1_OUT			0x110b0
+		>;
+	};
+
+	mux_sdhc1: sdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD			0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK			0x10071
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0		0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1		0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2		0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3		0x17059
+		>;
+	};
+
+	mux_sdhc1_100mhz: sdhc1-100mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD			0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK			0x170b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0		0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1		0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2		0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3		0x170b9
+		>;
+	};
+
+	mux_sdhc1_200mhz: sdhc1-200mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD			0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK			0x170f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0		0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1		0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2		0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3		0x170f9
+		>;
+	};
+
+	mux_sdhc1_cd: sdhc1-cd-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19		0x17059
+		>;
+	};
+
+	mux_sdhc2: sdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK			0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD			0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0		0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1		0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2		0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3		0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4		0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5		0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6		0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7		0x17059
+		>;
+	};
+
+	mux_spi3: ecspi3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI		0x100b1
+			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK		0x100b1
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20		0x3008
+		>;
+	};
+
+	mux_uart: uartgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX		0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX		0x1b0b1
+		>;
+	};
+
+	mux_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY		0x30b0
+		>;
+	};
+};

diff --git a/src/arm/nxp/imx/imx7s.dtsi b/src/arm/nxp/imx/imx7s.dtsi
index 9c81c6b..22dd724 100644
--- a/src/arm/nxp/imx/imx7s.dtsi
+++ b/src/arm/nxp/imx/imx7s.dtsi

@@ -636,6 +636,15 @@
 					clock-names = "snvs-rtc";
 				};
 
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					value = <0x60>;
+					mask = <0x60>;
+					status = "disabled";
+				};
+
 				snvs_pwrkey: snvs-powerkey {
 					compatible = "fsl,sec-v4.0-pwrkey";
 					regmap = <&snvs>;

diff --git a/src/arm/qcom/msm8226-motorola-falcon.dts b/src/arm/qcom/msm8226-motorola-falcon.dts
new file mode 100644
index 0000000..029e1b1
--- /dev/null
+++ b/src/arm/qcom/msm8226-motorola-falcon.dts

@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &smem_region;
+
+/ {
+	model = "Motorola Moto G (2013)";
+	compatible = "motorola,falcon", "qcom,msm8226";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x03200000 0x800000>;
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 3)>;
+			format = "r8g8b8";
+			vsp-supply = <&reg_lcd_pos>;
+			vsn-supply = <&reg_lcd_neg>;
+			vddio-supply = <&vddio_disp_vreg>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	vddio_disp_vreg: regulator-vddio-disp {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio_disp";
+		gpio = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pm8226_l8>;
+		startup-delay-us = <300>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		dhob@f500000 {
+			reg = <0x0f500000 0x40000>;
+			no-map;
+		};
+
+		shob@f540000 {
+			reg = <0x0f540000 0x2000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+
+		/* Actually <0x0fa00000 0x500000>, but first 100000 is smem */
+		reserved@fb00000 {
+			reg = <0x0fb00000 0x400000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	regulator@3e {
+		compatible = "ti,tps65132";
+		reg = <0x3e>;
+		pinctrl-0 = <&reg_lcd_default>;
+		pinctrl-names = "default";
+
+		reg_lcd_pos: outp {
+			regulator-name = "outp";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+			regulator-active-discharge = <1>;
+			regulator-boot-on;
+			enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		};
+
+		reg_lcd_neg: outn {
+			regulator-name = "outn";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+			regulator-active-discharge = <1>;
+			regulator-boot-on;
+			enable-gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp108";
+		reg = <0x48>;
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&temp_alert_default>;
+		pinctrl-names = "default";
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&pm8226_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-boot-on;
+		};
+
+		pm8226_lvs1: lvs1 {
+			regulator-always-on;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <2000000>;
+	qcom,fast-charge-current-limit = <1900000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
+};
+
+&tlmm {
+	reg_lcd_default: reg-lcd-default-state {
+		pins = "gpio31", "gpio33";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	reg_vddio_disp_default: reg-vddio-disp-default-state {
+		pins = "gpio34";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	temp_alert_default: temp-alert-default-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-disable;
+	};
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};

diff --git a/src/arm/qcom/qcom-apq8064.dtsi b/src/arm/qcom/qcom-apq8064.dtsi
index 9a5ba97..11e60b7 100644
--- a/src/arm/qcom/qcom-apq8064.dtsi
+++ b/src/arm/qcom/qcom-apq8064.dtsi

@@ -87,7 +87,7 @@
 		};
 
 		idle-states {
-			CPU_SPC: spc {
+			CPU_SPC: cpu-spc {
 				compatible = "qcom,idle-state-spc",
 						"arm,idle-state";
 				entry-latency-us = <400>;
@@ -1334,6 +1334,16 @@
 				 <&gcc PCIE_PHY_RESET>;
 			reset-names = "axi", "ahb", "por", "pci", "phy";
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		hdmi: hdmi-tx@4a00000 {

diff --git a/src/arm/qcom/qcom-apq8084.dtsi b/src/arm/qcom/qcom-apq8084.dtsi
index 8204e64..ca53dff 100644
--- a/src/arm/qcom/qcom-apq8084.dtsi
+++ b/src/arm/qcom/qcom-apq8084.dtsi

@@ -79,7 +79,7 @@
 		};
 
 		idle-states {
-			CPU_SPC: spc {
+			CPU_SPC: cpu-spc {
 				compatible = "qcom,idle-state-spc",
 						"arm,idle-state";
 				entry-latency-us = <150>;

diff --git a/src/arm/qcom/qcom-ipq4019.dtsi b/src/arm/qcom/qcom-ipq4019.dtsi
index 681cb3f..0fb65f2 100644
--- a/src/arm/qcom/qcom-ipq4019.dtsi
+++ b/src/arm/qcom/qcom-ipq4019.dtsi

@@ -470,6 +470,16 @@
 				      "phy_ahb";
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		qpic_bam: dma-controller@7984000 {
@@ -598,24 +608,33 @@
 			reg = <0x90000 0x64>;
 			status = "disabled";
 
-			ethphy0: ethernet-phy@0 {
+			ethernet-phy-package@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "qcom,qca8075-package";
 				reg = <0>;
-			};
 
-			ethphy1: ethernet-phy@1 {
-				reg = <1>;
-			};
+				qcom,tx-drive-strength-milliwatt = <300>;
 
-			ethphy2: ethernet-phy@2 {
-				reg = <2>;
-			};
+				ethphy0: ethernet-phy@0 {
+					reg = <0>;
+				};
 
-			ethphy3: ethernet-phy@3 {
-				reg = <3>;
-			};
+				ethphy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				ethphy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+
+				ethphy3: ethernet-phy@3 {
+					reg = <3>;
+				};
 
-			ethphy4: ethernet-phy@4 {
-				reg = <4>;
+				ethphy4: ethernet-phy@4 {
+					reg = <4>;
+				};
 			};
 		};
 

diff --git a/src/arm/qcom/qcom-ipq8064.dtsi b/src/arm/qcom/qcom-ipq8064.dtsi
index 2eb6758..f128510 100644
--- a/src/arm/qcom/qcom-ipq8064.dtsi
+++ b/src/arm/qcom/qcom-ipq8064.dtsi

@@ -1121,6 +1121,16 @@
 
 			status = "disabled";
 			perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie1: pcie@1b700000 {
@@ -1172,6 +1182,16 @@
 
 			status = "disabled";
 			perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie2: pcie@1b900000 {
@@ -1223,6 +1243,16 @@
 
 			status = "disabled";
 			perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		qsgmii_csr: syscon@1bb00000 {

diff --git a/src/arm/qcom/qcom-msm8916-smp.dtsi b/src/arm/qcom/qcom-msm8916-smp.dtsi
index 36328db..1ba403b 100644
--- a/src/arm/qcom/qcom-msm8916-smp.dtsi
+++ b/src/arm/qcom/qcom-msm8916-smp.dtsi

@@ -26,7 +26,7 @@
 };
 
 &CPU_SLEEP_0 {
-	compatible = "qcom,idle-state-spc";
+	compatible = "qcom,idle-state-spc", "arm,idle-state";
 };
 
 &cpu0_acc {

diff --git a/src/arm/qcom/qcom-msm8974.dtsi b/src/arm/qcom/qcom-msm8974.dtsi
index 5efc38d..5651bb3 100644
--- a/src/arm/qcom/qcom-msm8974.dtsi
+++ b/src/arm/qcom/qcom-msm8974.dtsi

@@ -14,6 +14,8 @@
 	#size-cells = <1>;
 	interrupt-parent = <&intc>;
 
+	chosen { };
+
 	clocks {
 		xo_board: xo_board {
 			compatible = "fixed-clock";
@@ -85,7 +87,7 @@
 		};
 
 		idle-states {
-			CPU_SPC: spc {
+			CPU_SPC: cpu-spc {
 				compatible = "qcom,idle-state-spc",
 						"arm,idle-state";
 				entry-latency-us = <150>;
@@ -103,7 +105,7 @@
 		};
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0>;
 	};

diff --git a/src/arm/qcom/qcom-msm8974pro-samsung-klte-common.dtsi b/src/arm/qcom/qcom-msm8974pro-samsung-klte-common.dtsi
new file mode 100644
index 0000000..b5443fd
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8974pro-samsung-klte-common.dtsi

@@ -0,0 +1,818 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "pma8084.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_3; /* SDC2 SD card slot */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-home {
+			label = "home_key";
+			gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	i2c-gpio-touchkey {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_touchkey_pins>;
+
+		touchkey@20 {
+			compatible = "cypress,tm2-touchkey";
+			reg = <0x20>;
+
+			interrupt-parent = <&pma8084_gpios>;
+			interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&touchkey_pin>;
+
+			vcc-supply = <&max77826_ldo15>;
+			vdd-supply = <&pma8084_l19>;
+
+			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+		};
+	};
+
+	i2c_led_gpio: i2c-gpio-led {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_led_gpioex_pins>;
+
+		i2c-gpio,delay-us = <2>;
+
+		gpio_expander: gpio@20 {
+			compatible = "nxp,pcal6416";
+			reg = <0x20>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			vcc-supply = <&pma8084_s4>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpioex_pin>;
+
+			reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+		};
+
+		led-controller@30 {
+			compatible = "panasonic,an30259a";
+			reg = <0x30>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@1 {
+				reg = <1>;
+				function = LED_FUNCTION_STATUS;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@2 {
+				reg = <2>;
+				function = LED_FUNCTION_STATUS;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@3 {
+				reg = <3>;
+				function = LED_FUNCTION_STATUS;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vreg_panel: panel-regulator {
+		compatible = "regulator-fixed";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_en_pin>;
+
+		regulator-name = "panel-vddr-reg";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+
+		gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupt-parent = <&pma8084_gpios>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&max77826_ldo13>;
+		vio-supply = <&pma8084_lvs2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pin>;
+
+		syna,startup-delay-ms = <100>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	pmic@60 {
+		reg = <0x60>;
+		compatible = "maxim,max77826";
+
+		regulators {
+			max77826_ldo1: LDO1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			max77826_ldo2: LDO2 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			max77826_ldo3: LDO3 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			max77826_ldo4: LDO4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo5: LDO5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo6: LDO6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo7: LDO7 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo8: LDO8 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo9: LDO9 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo10: LDO10 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2950000>;
+			};
+
+			max77826_ldo11: LDO11 {
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2950000>;
+			};
+
+			max77826_ldo12: LDO12 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo13: LDO13 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo14: LDO14 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo15: LDO15 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_buck: BUCK {
+				regulator-min-microvolt = <1225000>;
+				regulator-max-microvolt = <1225000>;
+			};
+
+			max77826_buckboost: BUCKBOOST {
+				regulator-min-microvolt = <3400000>;
+				regulator-max-microvolt = <3400000>;
+			};
+		};
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_i2c6 {
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max17048";
+		reg = <0x36>;
+
+		maxim,double-soc;
+		maxim,rcomp = /bits/ 8 <0x56>;
+
+		interrupt-parent = <&pma8084_gpios>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&fuelgauge_pin>;
+	};
+};
+
+&blsp2_uart2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart2_pins_active>;
+	pinctrl-1 = <&blsp2_uart2_pins_sleep>;
+
+	bluetooth {
+		compatible = "brcm,bcm43540-bt";
+		max-speed = <3000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins>;
+		device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wakeup";
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+
+	vdda-supply = <&pma8084_l2>;
+	vdd-supply = <&pma8084_l22>;
+	vddio-supply = <&pma8084_l12>;
+
+	panel: panel@0 {
+		reg = <0>;
+		compatible = "samsung,s6e3fa2";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
+
+		iovdd-supply = <&pma8084_lvs4>;
+		vddr-supply = <&vreg_panel>;
+
+		reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+
+	vddio-supply = <&pma8084_l12>;
+};
+
+&pma8084_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio2", "gpio3", "gpio5";
+		function = "normal";
+
+		bias-pull-up;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+
+	touchkey_pin: touchkey-int-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+
+	touch_pin: touchscreen-int-state {
+		pins = "gpio8";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+
+	panel_en_pin: panel-en-state {
+		pins = "gpio14";
+		function = "normal";
+		bias-pull-up;
+		power-source = <PMA8084_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+
+	wlan_sleep_clk_pin: wlan-sleep-clk-state {
+		pins = "gpio16";
+		function = "func2";
+
+		output-high;
+		power-source = <PMA8084_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+	};
+
+	panel_rst_pin: panel-rst-state {
+		pins = "gpio17";
+		function = "normal";
+		bias-disable;
+		power-source = <PMA8084_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+
+	fuelgauge_pin: fuelgauge-int-state {
+		pins = "gpio21";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+};
+
+&remoteproc_adsp {
+	status = "okay";
+	cx-supply = <&pma8084_s2>;
+};
+
+&remoteproc_mss {
+	status = "okay";
+	cx-supply = <&pma8084_s2>;
+	mss-supply = <&pma8084_s6>;
+	mx-supply = <&pma8084_s1>;
+	pll-supply = <&pma8084_l12>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pma8084-regulators";
+
+		pma8084_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+		};
+
+		pma8084_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pma8084_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pma8084_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pma8084_s6: s6 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pma8084_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pma8084_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pma8084_l3: l3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pma8084_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pma8084_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pma8084_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pma8084_l11: l11 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pma8084_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pma8084_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pma8084_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pma8084_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pma8084_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pma8084_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pma8084_l19: l19 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pma8084_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pma8084_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pma8084_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pma8084_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pma8084_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pma8084_l25: l25 {
+			regulator-min-microvolt = <2100000>;
+			regulator-max-microvolt = <2100000>;
+		};
+
+		pma8084_l26: l26 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pma8084_l27: l27 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pma8084_lvs1: lvs1 {};
+		pma8084_lvs2: lvs2 {};
+		pma8084_lvs3: lvs3 {};
+		pma8084_lvs4: lvs4 {};
+
+		pma8084_5vs1: 5vs1 {};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pma8084_l20>;
+	vqmmc-supply = <&pma8084_s4>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+	max-frequency = <100000000>;
+	vmmc-supply = <&vreg_wlan>;
+	vqmmc-supply = <&pma8084_s4>;
+	non-removable;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+
+	wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+
+		/*
+		 * Allow all klte* variants to load the same NVRAM file,
+		 * as they have little difference in the WiFi part.
+		 */
+		brcm,board-type = "samsung,klte";
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
+	};
+};
+
+&sdhc_3 {
+	status = "okay";
+	max-frequency = <100000000>;
+	vmmc-supply = <&pma8084_l21>;
+	vqmmc-supply = <&pma8084_l13>;
+
+	/*
+	 * cd-gpio is intentionally disabled. If enabled, an SD card
+	 * present during boot is not initialized correctly. Without
+	 * cd-gpios the driver resorts to polling, so hotplug works.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>;
+	/* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */
+};
+
+&tlmm {
+	/* This seems suspicious, but somebody with this device should look into it. */
+	blsp2_uart2_pins_active: blsp2-uart2-pins-active-state {
+		pins = "gpio45", "gpio46", "gpio47", "gpio48";
+		function = "blsp_uart8";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep-state {
+		pins = "gpio45", "gpio46", "gpio47", "gpio48";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	bt_pins: bt-pins-state {
+		hostwake-pins {
+			pins = "gpio75";
+			function = "gpio";
+			drive-strength = <16>;
+		};
+
+		devwake-pins {
+			pins = "gpio91";
+			function = "gpio";
+			drive-strength = <2>;
+		};
+	};
+
+	sdc1_on: sdhc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <4>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <4>;
+			bias-pull-up;
+		};
+	};
+
+	sdc3_on: sdc3-on-state {
+		pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+		function = "sdc3";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	sdhc3_cd_pin: sdc3-cd-on-state {
+		pins = "gpio62";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_on: sdhc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <6>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	i2c_touchkey_pins: i2c-touchkey-state {
+		pins = "gpio95", "gpio96";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	i2c_led_gpioex_pins: i2c-led-gpioex-state {
+		function = "gpio";
+		bias-pull-down;
+	};
+
+	gpioex_pin: gpioex-state {
+		pins = "gpio145";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	wifi_pin: wifi-state {
+		pins = "gpio92";
+		function = "gpio";
+		bias-pull-down;
+	};
+
+	panel_te_pin: panel-state {
+		pins = "gpio12";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pma8084_l6>;
+	v3p3-supply = <&pma8084_l24>;
+
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};

diff --git a/src/arm/qcom/qcom-msm8974pro-samsung-klte.dts b/src/arm/qcom/qcom-msm8974pro-samsung-klte.dts
index b93539e..954665f 100644
--- a/src/arm/qcom/qcom-msm8974pro-samsung-klte.dts
+++ b/src/arm/qcom/qcom-msm8974pro-samsung-klte.dts

@@ -1,817 +1,16 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974pro.dtsi"
-#include "pma8084.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/leds/common.h>
+#include "qcom-msm8974pro-samsung-klte-common.dtsi"
 
 / {
 	model = "Samsung Galaxy S5";
 	compatible = "samsung,klte", "qcom,msm8974pro", "qcom,msm8974";
-	chassis-type = "handset";
-
-	aliases {
-		serial0 = &blsp1_uart1;
-		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
-		mmc1 = &sdhc_3; /* SDC2 SD card slot */
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		key-volume-down {
-			label = "volume_down";
-			gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <15>;
-		};
-
-		key-home {
-			label = "home_key";
-			gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_HOMEPAGE>;
-			wakeup-source;
-			debounce-interval = <15>;
-		};
-
-		key-volume-up {
-			label = "volume_up";
-			gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-			debounce-interval = <15>;
-		};
-	};
-
-	i2c-gpio-touchkey {
-		compatible = "i2c-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c_touchkey_pins>;
-
-		touchkey@20 {
-			compatible = "cypress,tm2-touchkey";
-			reg = <0x20>;
-
-			interrupt-parent = <&pma8084_gpios>;
-			interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&touchkey_pin>;
-
-			vcc-supply = <&max77826_ldo15>;
-			vdd-supply = <&pma8084_l19>;
-
-			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
-		};
-	};
-
-	i2c-gpio-led {
-		compatible = "i2c-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c_led_gpioex_pins>;
-
-		i2c-gpio,delay-us = <2>;
-
-		gpio_expander: gpio@20 {
-			compatible = "nxp,pcal6416";
-			reg = <0x20>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			vcc-supply = <&pma8084_s4>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpioex_pin>;
-
-			reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
-		};
-
-		led-controller@30 {
-			compatible = "panasonic,an30259a";
-			reg = <0x30>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			led@1 {
-				reg = <1>;
-				function = LED_FUNCTION_STATUS;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@2 {
-				reg = <2>;
-				function = LED_FUNCTION_STATUS;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-
-			led@3 {
-				reg = <3>;
-				function = LED_FUNCTION_STATUS;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-		};
-	};
-
-	vreg_wlan: wlan-regulator {
-		compatible = "regulator-fixed";
-
-		regulator-name = "wl-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vreg_panel: panel-regulator {
-		compatible = "regulator-fixed";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_en_pin>;
-
-		regulator-name = "panel-vddr-reg";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-
-		gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vreg_vph_pwr: vreg-vph-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "vph-pwr";
-
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-
-		regulator-always-on;
-	};
-};
-
-&blsp1_i2c2 {
-	status = "okay";
-
-	touchscreen@20 {
-		compatible = "syna,rmi4-i2c";
-		reg = <0x20>;
-
-		interrupt-parent = <&pma8084_gpios>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		vdd-supply = <&max77826_ldo13>;
-		vio-supply = <&pma8084_lvs2>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&touch_pin>;
-
-		syna,startup-delay-ms = <100>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rmi4-f01@1 {
-			reg = <0x1>;
-			syna,nosleep-mode = <1>;
-		};
-
-		rmi4-f12@12 {
-			reg = <0x12>;
-			syna,sensor-type = <1>;
-		};
-	};
-};
-
-&blsp1_i2c6 {
-	status = "okay";
-
-	pmic@60 {
-		reg = <0x60>;
-		compatible = "maxim,max77826";
-
-		regulators {
-			max77826_ldo1: LDO1 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			max77826_ldo2: LDO2 {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			max77826_ldo3: LDO3 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			max77826_ldo4: LDO4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			max77826_ldo5: LDO5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			max77826_ldo6: LDO6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			max77826_ldo7: LDO7 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			max77826_ldo8: LDO8 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			max77826_ldo9: LDO9 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			max77826_ldo10: LDO10 {
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2950000>;
-			};
-
-			max77826_ldo11: LDO11 {
-				regulator-min-microvolt = <2700000>;
-				regulator-max-microvolt = <2950000>;
-			};
-
-			max77826_ldo12: LDO12 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			max77826_ldo13: LDO13 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			max77826_ldo14: LDO14 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			max77826_ldo15: LDO15 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			max77826_buck: BUCK {
-				regulator-min-microvolt = <1225000>;
-				regulator-max-microvolt = <1225000>;
-			};
-
-			max77826_buckboost: BUCKBOOST {
-				regulator-min-microvolt = <3400000>;
-				regulator-max-microvolt = <3400000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart2 {
-	status = "okay";
-};
-
-&blsp2_i2c6 {
-	status = "okay";
-
-	fuelgauge@36 {
-		compatible = "maxim,max17048";
-		reg = <0x36>;
-
-		maxim,double-soc;
-		maxim,rcomp = /bits/ 8 <0x56>;
-
-		interrupt-parent = <&pma8084_gpios>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&fuelgauge_pin>;
-	};
-};
-
-&blsp2_uart2 {
-	status = "okay";
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&blsp2_uart2_pins_active>;
-	pinctrl-1 = <&blsp2_uart2_pins_sleep>;
-
-	bluetooth {
-		compatible = "brcm,bcm43540-bt";
-		max-speed = <3000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_pins>;
-		device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
-		interrupt-parent = <&tlmm>;
-		interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wakeup";
-	};
-};
-
-&gpu {
-	status = "okay";
-};
-
-&mdss {
-	status = "okay";
-};
-
-&mdss_dsi0 {
-	status = "okay";
-
-	vdda-supply = <&pma8084_l2>;
-	vdd-supply = <&pma8084_l22>;
-	vddio-supply = <&pma8084_l12>;
-
-	panel: panel@0 {
-		reg = <0>;
-		compatible = "samsung,s6e3fa2";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
-
-		iovdd-supply = <&pma8084_lvs4>;
-		vddr-supply = <&vreg_panel>;
-
-		reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&mdss_dsi0_out>;
-			};
-		};
-	};
-};
-
-&mdss_dsi0_out {
-	remote-endpoint = <&panel_in>;
-	data-lanes = <0 1 2 3>;
-};
-
-&mdss_dsi0_phy {
-	status = "okay";
-
-	vddio-supply = <&pma8084_l12>;
 };
 
-&pma8084_gpios {
-	gpio_keys_pin_a: gpio-keys-active-state {
-		pins = "gpio2", "gpio3", "gpio5";
-		function = "normal";
-
-		bias-pull-up;
-		power-source = <PMA8084_GPIO_S4>;
-	};
-
-	touchkey_pin: touchkey-int-state {
-		pins = "gpio6";
-		function = "normal";
-		bias-disable;
-		input-enable;
-		power-source = <PMA8084_GPIO_S4>;
-	};
-
-	touch_pin: touchscreen-int-state {
-		pins = "gpio8";
-		function = "normal";
-		bias-disable;
-		input-enable;
-		power-source = <PMA8084_GPIO_S4>;
-	};
-
-	panel_en_pin: panel-en-state {
-		pins = "gpio14";
-		function = "normal";
-		bias-pull-up;
-		power-source = <PMA8084_GPIO_S4>;
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-	};
-
-	wlan_sleep_clk_pin: wlan-sleep-clk-state {
-		pins = "gpio16";
-		function = "func2";
-
-		output-high;
-		power-source = <PMA8084_GPIO_S4>;
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
-	};
-
-	panel_rst_pin: panel-rst-state {
-		pins = "gpio17";
-		function = "normal";
-		bias-disable;
-		power-source = <PMA8084_GPIO_S4>;
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-	};
-
-	fuelgauge_pin: fuelgauge-int-state {
-		pins = "gpio21";
-		function = "normal";
-		bias-disable;
-		input-enable;
-		power-source = <PMA8084_GPIO_S4>;
-	};
+&i2c_led_gpio {
+	scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 };
 
-&remoteproc_adsp {
-	status = "okay";
-	cx-supply = <&pma8084_s2>;
-};
-
-&remoteproc_mss {
-	status = "okay";
-	cx-supply = <&pma8084_s2>;
-	mss-supply = <&pma8084_s6>;
-	mx-supply = <&pma8084_s1>;
-	pll-supply = <&pma8084_l12>;
-};
-
-&rpm_requests {
-	regulators-0 {
-		compatible = "qcom,rpm-pma8084-regulators";
-
-		pma8084_s1: s1 {
-			regulator-min-microvolt = <675000>;
-			regulator-max-microvolt = <1050000>;
-			regulator-always-on;
-		};
-
-		pma8084_s2: s2 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pma8084_s3: s3 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		pma8084_s4: s4 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_s5: s5 {
-			regulator-min-microvolt = <2150000>;
-			regulator-max-microvolt = <2150000>;
-		};
-
-		pma8084_s6: s6 {
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pma8084_l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pma8084_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pma8084_l3: l3 {
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pma8084_l4: l4 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pma8084_l5: l5 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_l6: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_l7: l7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_l8: l8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_l9: l9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pma8084_l10: l10 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pma8084_l11: l11 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		pma8084_l12: l12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		pma8084_l13: l13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pma8084_l14: l14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_l15: l15 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pma8084_l16: l16 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-
-		pma8084_l17: l17 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pma8084_l18: l18 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pma8084_l19: l19 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		pma8084_l20: l20 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-system-load = <200000>;
-			regulator-allow-set-load;
-		};
-
-		pma8084_l21: l21 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-system-load = <200000>;
-			regulator-allow-set-load;
-		};
-
-		pma8084_l22: l22 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		pma8084_l23: l23 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pma8084_l24: l24 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-		};
-
-		pma8084_l25: l25 {
-			regulator-min-microvolt = <2100000>;
-			regulator-max-microvolt = <2100000>;
-		};
-
-		pma8084_l26: l26 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pma8084_l27: l27 {
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pma8084_lvs1: lvs1 {};
-		pma8084_lvs2: lvs2 {};
-		pma8084_lvs3: lvs3 {};
-		pma8084_lvs4: lvs4 {};
-
-		pma8084_5vs1: 5vs1 {};
-	};
-};
-
-&sdhc_1 {
-	status = "okay";
-
-	vmmc-supply = <&pma8084_l20>;
-	vqmmc-supply = <&pma8084_s4>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_on>;
-	pinctrl-1 = <&sdc1_off>;
-};
-
-&sdhc_2 {
-	status = "okay";
-	max-frequency = <100000000>;
-	vmmc-supply = <&vreg_wlan>;
-	vqmmc-supply = <&pma8084_s4>;
-	non-removable;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
-
-	wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
-	};
-};
-
-&sdhc_3 {
-	status = "okay";
-	max-frequency = <100000000>;
-	vmmc-supply = <&pma8084_l21>;
-	vqmmc-supply = <&pma8084_l13>;
-
-	/*
-	 * cd-gpio is intentionally disabled. If enabled, an SD card
-	 * present during boot is not initialized correctly. Without
-	 * cd-gpios the driver resorts to polling, so hotplug works.
-	 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>;
-	/* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */
-};
-
-&tlmm {
-	/* This seems suspicious, but somebody with this device should look into it. */
-	blsp2_uart2_pins_active: blsp2-uart2-pins-active-state {
-		pins = "gpio45", "gpio46", "gpio47", "gpio48";
-		function = "blsp_uart8";
-		drive-strength = <8>;
-		bias-disable;
-	};
-
-	blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep-state {
-		pins = "gpio45", "gpio46", "gpio47", "gpio48";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	bt_pins: bt-pins-state {
-		hostwake-pins {
-			pins = "gpio75";
-			function = "gpio";
-			drive-strength = <16>;
-		};
-
-		devwake-pins {
-			pins = "gpio91";
-			function = "gpio";
-			drive-strength = <2>;
-		};
-	};
-
-	sdc1_on: sdhc1-on-state {
-		clk-pins {
-			pins = "sdc1_clk";
-			drive-strength = <4>;
-			bias-disable;
-		};
-
-		cmd-data-pins {
-			pins = "sdc1_cmd", "sdc1_data";
-			drive-strength = <4>;
-			bias-pull-up;
-		};
-	};
-
-	sdc3_on: sdc3-on-state {
-		pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
-		function = "sdc3";
-		drive-strength = <8>;
-		bias-disable;
-	};
-
-	sdhc3_cd_pin: sdc3-cd-on-state {
-		pins = "gpio62";
-		function = "gpio";
-
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	sdc2_on: sdhc2-on-state {
-		clk-pins {
-			pins = "sdc2_clk";
-			drive-strength = <6>;
-			bias-disable;
-		};
-
-		cmd-data-pins {
-			pins = "sdc2_cmd", "sdc2_data";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
-	};
-
-	i2c_touchkey_pins: i2c-touchkey-state {
-		pins = "gpio95", "gpio96";
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	i2c_led_gpioex_pins: i2c-led-gpioex-state {
-		pins = "gpio120", "gpio121";
-		function = "gpio";
-		bias-pull-down;
-	};
-
-	gpioex_pin: gpioex-state {
-		pins = "gpio145";
-		function = "gpio";
-		bias-pull-up;
-		drive-strength = <2>;
-	};
-
-	wifi_pin: wifi-state {
-		pins = "gpio92";
-		function = "gpio";
-		bias-pull-down;
-	};
-
-	panel_te_pin: panel-state {
-		pins = "gpio12";
-		function = "mdp_vsync";
-		drive-strength = <2>;
-		bias-disable;
-	};
-};
-
-&usb {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-};
-
-&usb_hs1_phy {
-	status = "okay";
-
-	v1p8-supply = <&pma8084_l6>;
-	v3p3-supply = <&pma8084_l24>;
-
-	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+&i2c_led_gpioex_pins {
+	pins = "gpio120", "gpio121";
 };

diff --git a/src/arm/qcom/qcom-msm8974pro-samsung-kltechn.dts b/src/arm/qcom/qcom-msm8974pro-samsung-kltechn.dts
new file mode 100644
index 0000000..b902e31
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8974pro-samsung-kltechn.dts

@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro-samsung-klte-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy S5 China";
+	compatible = "samsung,kltechn", "samsung,klte", "qcom,msm8974pro", "qcom,msm8974";
+};
+
+&i2c_led_gpio {
+	scl-gpios = <&tlmm 61 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&tlmm 60 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c_led_gpioex_pins {
+	pins = "gpio60", "gpio61";
+};

diff --git a/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index ee94741..409d179 100644
--- a/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts

@@ -1,60 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974pro.dtsi"
-#include "pm8841.dtsi"
-#include "pm8941.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi"
 
 / {
 	model = "Sony Xperia Z2 Tablet";
 	compatible = "sony,xperia-castor", "qcom,msm8974pro", "qcom,msm8974";
 	chassis-type = "tablet";
 
-	aliases {
-		serial0 = &blsp1_uart2;
-		serial1 = &blsp2_uart1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		key-volume-down {
-			label = "volume_down";
-			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-
-		key-camera-snapshot {
-			label = "camera_snapshot";
-			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA>;
-		};
-
-		key-camera-focus {
-			label = "camera_focus";
-			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA_FOCUS>;
-		};
-
-		key-volume-up {
-			label = "volume_up";
-			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-	};
-
 	vreg_bl_vddio: lcd-backlight-vddio {
 		compatible = "regulator-fixed";
 		regulator-name = "vreg_bl_vddio";
@@ -67,107 +18,15 @@
 		vin-supply = <&pm8941_s3>;
 		startup-delay-us = <70000>;
 
-		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_backlight_en_pin_a>;
-	};
-
-	vreg_vsp: lcd-dcdc-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_vsp";
-		regulator-min-microvolt = <5600000>;
-		regulator-max-microvolt = <5600000>;
-
-		gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_dcdc_en_pin_a>;
-	};
-
-	vreg_boost: vreg-boost {
-		compatible = "regulator-fixed";
-
-		regulator-name = "vreg-boost";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
 		pinctrl-names = "default";
-		pinctrl-0 = <&boost_bypass_n_pin>;
 	};
-
-	vreg_vph_pwr: vreg-vph-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "vph-pwr";
-
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-
-		regulator-always-on;
-	};
-
-	vreg_wlan: wlan-regulator {
-		compatible = "regulator-fixed";
-
-		regulator-name = "wl-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_regulator_pin>;
-	};
-};
-
-&blsp1_uart2 {
-	status = "okay";
 };
 
-&blsp2_i2c2 {
-	status = "okay";
+&blsp2_i2c5 {
 	clock-frequency = <355000>;
 
-	synaptics@2c {
-		compatible = "syna,rmi4-i2c";
-		reg = <0x2c>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd-supply = <&pm8941_l22>;
-		vio-supply = <&pm8941_lvs3>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_int_pin>;
-
-		syna,startup-delay-ms = <100>;
-
-		rmi4-f01@1 {
-			reg = <0x1>;
-			syna,nosleep-mode = <1>;
-		};
-
-		rmi4-f11@11 {
-			reg = <0x11>;
-			syna,sensor-type = <1>;
-			touchscreen-inverted-x;
-		};
-	};
-};
-
-&blsp2_i2c5 {
 	status = "okay";
-	clock-frequency = <355000>;
 
 	lp8566_wled: backlight@2c {
 		compatible = "ti,lp8556";
@@ -182,42 +41,52 @@
 			rom-addr = /bits/ 8 <0xa0>;
 			rom-val = /bits/ 8 <0xff>;
 		};
+
 		rom-a1h {
 			rom-addr = /bits/ 8 <0xa1>;
 			rom-val = /bits/ 8 <0x3f>;
 		};
+
 		rom-a2h {
 			rom-addr = /bits/ 8 <0xa2>;
 			rom-val = /bits/ 8 <0x20>;
 		};
+
 		rom-a3h {
 			rom-addr = /bits/ 8 <0xa3>;
 			rom-val = /bits/ 8 <0x5e>;
 		};
+
 		rom-a4h {
 			rom-addr = /bits/ 8 <0xa4>;
 			rom-val = /bits/ 8 <0x02>;
 		};
+
 		rom-a5h {
 			rom-addr = /bits/ 8 <0xa5>;
 			rom-val = /bits/ 8 <0x04>;
 		};
+
 		rom-a6h {
 			rom-addr = /bits/ 8 <0xa6>;
 			rom-val = /bits/ 8 <0x80>;
 		};
+
 		rom-a7h {
 			rom-addr = /bits/ 8 <0xa7>;
 			rom-val = /bits/ 8 <0xf7>;
 		};
+
 		rom-a9h {
 			rom-addr = /bits/ 8 <0xa9>;
 			rom-val = /bits/ 8 <0x80>;
 		};
+
 		rom-aah {
 			rom-addr = /bits/ 8 <0xaa>;
 			rom-val = /bits/ 8 <0x0f>;
 		};
+
 		rom-aeh {
 			rom-addr = /bits/ 8 <0xae>;
 			rom-val = /bits/ 8 <0x0f>;
@@ -232,8 +101,8 @@
 		compatible = "brcm,bcm43438-bt";
 		max-speed = <3000000>;
 
-		pinctrl-names = "default";
 		pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>;
+		pinctrl-names = "default";
 
 		host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
 		device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
@@ -241,342 +110,29 @@
 	};
 };
 
-&pm8941_coincell {
-	status = "okay";
-
-	qcom,rset-ohms = <2100>;
-	qcom,vset-millivolts = <3000>;
-};
-
 &pm8941_gpios {
-	gpio_keys_pin_a: gpio-keys-active-state {
-		pins = "gpio2", "gpio5";
-		function = "normal";
-
-		bias-pull-up;
-		power-source = <PM8941_GPIO_S3>;
-	};
-
 	bt_reg_on_pin: bt-reg-on-state {
 		pins = "gpio16";
 		function = "normal";
-
 		output-low;
 		power-source = <PM8941_GPIO_S3>;
 	};
-
-	wlan_sleep_clk_pin: wl-sleep-clk-state {
-		pins = "gpio17";
-		function = "func2";
-
-		output-high;
-		power-source = <PM8941_GPIO_S3>;
-	};
-
-	wlan_regulator_pin: wl-reg-active-state {
-		pins = "gpio18";
-		function = "normal";
-
-		bias-disable;
-		power-source = <PM8941_GPIO_S3>;
-	};
-
-	lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
-		pins = "gpio20";
-		function = "normal";
-
-		bias-disable;
-		power-source = <PM8941_GPIO_S3>;
-		input-disable;
-		output-low;
-	};
-
 };
 
-&pm8941_lpg {
-	status = "okay";
-
-	qcom,power-source = <1>;
-
-	multi-led {
-		color = <LED_COLOR_ID_RGB>;
-		function = LED_FUNCTION_STATUS;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		led@5 {
-			reg = <5>;
-			color = <LED_COLOR_ID_BLUE>;
-		};
-
-		led@6 {
-			reg = <6>;
-			color = <LED_COLOR_ID_GREEN>;
-		};
-
-		led@7 {
-			reg = <7>;
-			color = <LED_COLOR_ID_RED>;
-		};
-	};
-};
-
-&remoteproc_adsp {
-	cx-supply = <&pm8841_s2>;
-	status = "okay";
-};
-
-&remoteproc_mss {
-	cx-supply = <&pm8841_s2>;
-	mss-supply = <&pm8841_s3>;
-	mx-supply = <&pm8841_s1>;
-	pll-supply = <&pm8941_l12>;
-	status = "okay";
-};
-
 &rpm_requests {
-	regulators-0 {
-		compatible = "qcom,rpm-pm8841-regulators";
-
-		pm8841_s1: s1 {
-			regulator-min-microvolt = <675000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s2: s2 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s3: s3 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s4: s4 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-	};
-
 	regulators-1 {
-		compatible = "qcom,rpm-pm8941-regulators";
-
-		vdd_l1_l3-supply = <&pm8941_s1>;
-		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-		vdd_l4_l11-supply = <&pm8941_s1>;
-		vdd_l5_l7-supply = <&pm8941_s2>;
-		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
-		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
-		vdd_l21-supply = <&vreg_boost>;
-
-		pm8941_s1: s1 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_s2: s2 {
-			regulator-min-microvolt = <2150000>;
-			regulator-max-microvolt = <2150000>;
-			regulator-boot-on;
-		};
-
-		pm8941_s3: s3 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-system-load = <154000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_s4: s4 {
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-
-		pm8941_l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8941_l3: l3 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8941_l4: l4 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pm8941_l5: l5 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l6: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l7: l7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l8: l8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l9: l9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
 		pm8941_l11: l11 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1350000>;
 		};
 
-		pm8941_l12: l12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l13: l13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l14: l14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l15: l15 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pm8941_l16: l16 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-
-		pm8941_l17: l17 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-
-		pm8941_l18: l18 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
 		pm8941_l19: l19 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 		};
-
-		pm8941_l20: l20 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-system-load = <500000>;
-			regulator-allow-set-load;
-			regulator-boot-on;
-		};
-
-		pm8941_l21: l21 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l22: l22 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pm8941_l23: l23 {
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-		};
-
-		pm8941_l24: l24 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-			regulator-boot-on;
-		};
-
-		pm8941_lvs3: lvs3 {};
 	};
 };
 
-&sdhc_1 {
-	status = "okay";
-
-	vmmc-supply = <&pm8941_l20>;
-	vqmmc-supply = <&pm8941_s3>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_on>;
-	pinctrl-1 = <&sdc1_off>;
-};
-
-&sdhc_2 {
-	status = "okay";
-
-	vmmc-supply = <&pm8941_l21>;
-	vqmmc-supply = <&pm8941_l13>;
-
-	cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
-};
-
-&sdhc_3 {
-	status = "okay";
-
-	max-frequency = <100000000>;
-	vmmc-supply = <&vreg_wlan>;
-	non-removable;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdc3_on>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	bcrmf@1 {
-		compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
-		reg = <1>;
-
-		brcm,drive-strength = <10>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_sleep_clk_pin>;
-	};
-};
-
 &smbb {
 	qcom,fast-charge-safe-current = <1500000>;
 	qcom,fast-charge-current-limit = <1500000>;
@@ -591,75 +147,13 @@
 	status = "okay";
 };
 
-&tlmm {
-	lcd_backlight_en_pin_a: lcd-backlight-vddio-state {
-		pins = "gpio69";
-		function = "gpio";
-		drive-strength = <10>;
-		output-low;
-		bias-disable;
-	};
-
-	sdc1_on: sdc1-on-state {
-		clk-pins {
-			pins = "sdc1_clk";
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		cmd-data-pins {
-			pins = "sdc1_cmd", "sdc1_data";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-	};
-
-	sdc2_on: sdc2-on-state {
-		clk-pins {
-			pins = "sdc2_clk";
-			drive-strength = <6>;
-			bias-disable;
-		};
-
-		cmd-data-pins {
-			pins = "sdc2_cmd", "sdc2_data";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
-
-		cd-pins {
-			pins = "gpio62";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	sdc3_on: sdc3-on-state {
-		clk-pins {
-			pins = "gpio40";
-			function = "sdc3";
-			drive-strength = <10>;
-			bias-disable;
-		};
-
-		cmd-pins {
-			pins = "gpio39";
-			function = "sdc3";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-
-		data-pins {
-			pins = "gpio35", "gpio36", "gpio37", "gpio38";
-			function = "sdc3";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-	};
+&synaptics_touchscreen {
+	vio-supply = <&pm8941_lvs3>;
+};
 
-	ts_int_pin: ts-int-pin-state {
-		pins = "gpio86";
+&tlmm {
+	bt_dev_wake_pin: bt-dev-wake-state {
+		pins = "gpio96";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
@@ -673,33 +167,11 @@
 		output-low;
 	};
 
-	bt_dev_wake_pin: bt-dev-wake-state {
-		pins = "gpio96";
+	lcd_backlight_en_pin_a: lcd-backlight-vddio-state {
+		pins = "gpio69";
 		function = "gpio";
-		drive-strength = <2>;
+		drive-strength = <10>;
+		output-low;
 		bias-disable;
 	};
 };
-
-&usb {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-	extcon = <&smbb>, <&usb_id>;
-	vbus-supply = <&chg_otg>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-};
-
-&usb_hs1_phy {
-	status = "okay";
-
-	v1p8-supply = <&pm8941_l6>;
-	v3p3-supply = <&pm8941_l24>;
-
-	extcon = <&smbb>;
-	qcom,init-seq = /bits/ 8 <0x1 0x64>;
-};

diff --git a/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi b/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi
new file mode 100644
index 0000000..e129bb1
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi

@@ -0,0 +1,539 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+		serial0 = &blsp1_uart2;
+		serial1 = &blsp2_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_pin_a>;
+		pinctrl-names = "default";
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	vreg_vsp: lcd-dcdc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_vsp";
+		regulator-min-microvolt = <5600000>;
+		regulator-max-microvolt = <5600000>;
+
+		gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&lcd_dcdc_en_pin_a>;
+		pinctrl-names = "default";
+	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wlan_regulator_pin>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_i2c2 {
+	clock-frequency = <355000>;
+
+	status = "okay";
+
+	synaptics_touchscreen: synaptics@2c {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x2c>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd-supply = <&pm8941_l22>;
+		/* vio-supply is set in dts */
+
+		pinctrl-0 = <&ts_int_pin>;
+		pinctrl-names = "default";
+
+		syna,startup-delay-ms = <100>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+			touchscreen-inverted-x;
+		};
+	};
+};
+
+&pm8941_coincell {
+	qcom,rset-ohms = <2100>;
+	qcom,vset-millivolts = <3000>;
+
+	status = "okay";
+};
+
+&pm8941_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio2", "gpio5";
+		function = "normal";
+		bias-pull-up;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	wlan_sleep_clk_pin: wl-sleep-clk-state {
+		pins = "gpio17";
+		function = "func2";
+		output-high;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	wlan_regulator_pin: wl-reg-active-state {
+		pins = "gpio18";
+		function = "normal";
+		bias-disable;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
+		pins = "gpio20";
+		function = "normal";
+		bias-disable;
+		power-source = <PM8941_GPIO_S3>;
+		input-disable;
+		output-low;
+	};
+};
+
+&pm8941_lpg {
+	qcom,power-source = <1>;
+
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@6 {
+			reg = <6>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@7 {
+			reg = <7>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
+
+&pm8941_vib {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	cx-supply = <&pm8841_s2>;
+	status = "okay";
+};
+
+&remoteproc_mss {
+	cx-supply = <&pm8841_s2>;
+	mss-supply = <&pm8841_s3>;
+	mx-supply = <&pm8841_s1>;
+	pll-supply = <&pm8941_l12>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s4: s4 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+		vdd_l21-supply = <&vreg_boost>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <154000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s4: s4 {
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <500000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-boot-on;
+		};
+
+		pm8941_lvs3: lvs3 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8941_l21>;
+	vqmmc-supply = <&pm8941_l13>;
+
+	cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&sdhc_3 {
+	max-frequency = <100000000>;
+	vmmc-supply = <&vreg_wlan>;
+	non-removable;
+
+	pinctrl-0 = <&sdc3_on>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		brcm,drive-strength = <10>;
+
+		pinctrl-0 = <&wlan_sleep_clk_pin>;
+		pinctrl-names = "default";
+	};
+};
+
+&tlmm {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_on: sdc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <6>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+
+		cd-pins {
+			pins = "gpio62";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	sdc3_on: sdc3-on-state {
+		clk-pins {
+			pins = "gpio40";
+			function = "sdc3";
+			drive-strength = <10>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio39";
+			function = "sdc3";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio35", "gpio36", "gpio37", "gpio38";
+			function = "sdc3";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	ts_int_pin: ts-int-pin-state {
+		pins = "gpio86";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb {
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+
+	status = "okay";
+};
+
+&usb_hs1_phy {
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+
+	status = "okay";
+};

diff --git a/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts b/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts
new file mode 100644
index 0000000..1ed6e1c
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts

@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi"
+
+/ {
+	model = "Sony Xperia Z3";
+	compatible = "sony,xperia-leo", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "handset";
+
+	gpio-keys {
+		key-camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA>;
+			debounce-interval = <15>;
+		};
+
+		key-camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+			debounce-interval = <15>;
+		};
+	};
+};
+
+&gpio_keys_pin_a {
+	pins = "gpio2", "gpio3", "gpio4", "gpio5";
+};
+
+&smbb {
+	usb-charge-current-limit = <1500000>;
+	qcom,fast-charge-safe-current = <3000000>;
+	qcom,fast-charge-current-limit = <2150000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,auto-recharge-threshold-voltage = <4280000>;
+	qcom,minimum-input-voltage = <4200000>;
+
+	status = "okay";
+};
+
+&synaptics_touchscreen {
+	vio-supply = <&pm8941_s3>;
+};

diff --git a/src/arm/qcom/qcom-sdx55.dtsi b/src/arm/qcom/qcom-sdx55.dtsi
index edc9aaf..68fa585 100644
--- a/src/arm/qcom/qcom-sdx55.dtsi
+++ b/src/arm/qcom/qcom-sdx55.dtsi

@@ -378,6 +378,16 @@
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie_ep: pcie-ep@1c00000 {

diff --git a/src/arm/renesas/r7s72100.dtsi b/src/arm/renesas/r7s72100.dtsi
index e6d8da6..08ea4c5 100644
--- a/src/arm/renesas/r7s72100.dtsi
+++ b/src/arm/renesas/r7s72100.dtsi

@@ -125,6 +125,7 @@
 				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "bri";
 			clocks = <&mstp4_clks R7S72100_CLK_SCIF0>;
 			clock-names = "fck";
 			power-domains = <&cpg_clocks>;
@@ -138,6 +139,7 @@
 				     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "bri";
 			clocks = <&mstp4_clks R7S72100_CLK_SCIF1>;
 			clock-names = "fck";
 			power-domains = <&cpg_clocks>;
@@ -151,6 +153,7 @@
 				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "bri";
 			clocks = <&mstp4_clks R7S72100_CLK_SCIF2>;
 			clock-names = "fck";
 			power-domains = <&cpg_clocks>;
@@ -164,6 +167,7 @@
 				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "bri";
 			clocks = <&mstp4_clks R7S72100_CLK_SCIF3>;
 			clock-names = "fck";
 			power-domains = <&cpg_clocks>;
@@ -177,6 +181,7 @@
 				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "bri";
 			clocks = <&mstp4_clks R7S72100_CLK_SCIF4>;
 			clock-names = "fck";
 			power-domains = <&cpg_clocks>;
@@ -190,6 +195,7 @@
 				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "bri";
 			clocks = <&mstp4_clks R7S72100_CLK_SCIF5>;
 			clock-names = "fck";
 			power-domains = <&cpg_clocks>;
@@ -203,6 +209,7 @@
 				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "bri";
 			clocks = <&mstp4_clks R7S72100_CLK_SCIF6>;
 			clock-names = "fck";
 			power-domains = <&cpg_clocks>;
@@ -216,6 +223,7 @@
 				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "bri";
 			clocks = <&mstp4_clks R7S72100_CLK_SCIF7>;
 			clock-names = "fck";
 			power-domains = <&cpg_clocks>;

diff --git a/src/arm/renesas/r8a73a4.dtsi b/src/arm/renesas/r8a73a4.dtsi
index ac654ff..9a2ae28 100644
--- a/src/arm/renesas/r8a73a4.dtsi
+++ b/src/arm/renesas/r8a73a4.dtsi

@@ -60,6 +60,32 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
+	tmu0: timer@e61e0000 {
+		compatible = "renesas,tmu-r8a73a4", "renesas,tmu";
+		reg = <0 0xe61e0000 0 0x30>;
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2";
+		clocks = <&mstp1_clks R8A73A4_CLK_TMU0>;
+		clock-names = "fck";
+		power-domains = <&pd_c5>;
+		status = "disabled";
+	};
+
+	tmu3: timer@fff80000 {
+		compatible = "renesas,tmu-r8a73a4", "renesas,tmu";
+		reg = <0 0xfff80000 0 0x30>;
+		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2";
+		clocks = <&mstp1_clks R8A73A4_CLK_TMU3>;
+		clock-names = "fck";
+		power-domains = <&pd_a3r>;
+		status = "disabled";
+	};
+
 	dbsc1: memory-controller@e6790000 {
 		compatible = "renesas,dbsc-r8a73a4";
 		reg = <0 0xe6790000 0 0x10000>;
@@ -654,6 +680,17 @@
 		};
 
 		/* Gate clocks */
+		mstp1_clks: mstp1_clks@e6150134 {
+			compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
+			clocks = <&cp_clk>, <&mp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A73A4_CLK_TMU0 R8A73A4_CLK_TMU3
+			>;
+			clock-output-names =
+				"tmu0", "tmu3";
+		};
 		mstp2_clks: mstp2_clks@e6150138 {
 			compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;

diff --git a/src/arm/renesas/r8a7742.dtsi b/src/arm/renesas/r8a7742.dtsi
index 16d146db..d55c344 100644
--- a/src/arm/renesas/r8a7742.dtsi
+++ b/src/arm/renesas/r8a7742.dtsi

@@ -404,6 +404,64 @@
 			resets = <&cpg 407>;
 		};
 
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a7742", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@fff60000 {
+			compatible = "renesas,tmu-r8a7742", "renesas,tmu";
+			reg = <0 0xfff60000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 111>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 111>;
+			status = "disabled";
+		};
+
+		tmu2: timer@fff70000 {
+			compatible = "renesas,tmu-r8a7742", "renesas,tmu";
+			reg = <0 0xfff70000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu3: timer@fff80000 {
+			compatible = "renesas,tmu-r8a7742", "renesas,tmu";
+			reg = <0 0xfff80000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
 		thermal: thermal@e61f0000 {
 			compatible = "renesas,thermal-r8a7742",
 				     "renesas,rcar-gen2-thermal";

diff --git a/src/arm/renesas/r8a7743.dtsi b/src/arm/renesas/r8a7743.dtsi
index 2245d19..d917c0a 100644
--- a/src/arm/renesas/r8a7743.dtsi
+++ b/src/arm/renesas/r8a7743.dtsi

@@ -329,6 +329,64 @@
 			resets = <&cpg 407>;
 		};
 
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a7743", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@fff60000 {
+			compatible = "renesas,tmu-r8a7743", "renesas,tmu";
+			reg = <0 0xfff60000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 111>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 111>;
+			status = "disabled";
+		};
+
+		tmu2: timer@fff70000 {
+			compatible = "renesas,tmu-r8a7743", "renesas,tmu";
+			reg = <0 0xfff70000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu3: timer@fff80000 {
+			compatible = "renesas,tmu-r8a7743", "renesas,tmu";
+			reg = <0 0xfff80000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
 		thermal: thermal@e61f0000 {
 			compatible = "renesas,thermal-r8a7743",
 				     "renesas,rcar-gen2-thermal";

diff --git a/src/arm/renesas/r8a7744.dtsi b/src/arm/renesas/r8a7744.dtsi
index aa13841..754859c 100644
--- a/src/arm/renesas/r8a7744.dtsi
+++ b/src/arm/renesas/r8a7744.dtsi

@@ -329,6 +329,64 @@
 			resets = <&cpg 407>;
 		};
 
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a7744", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@fff60000 {
+			compatible = "renesas,tmu-r8a7744", "renesas,tmu";
+			reg = <0 0xfff60000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 111>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 111>;
+			status = "disabled";
+		};
+
+		tmu2: timer@fff70000 {
+			compatible = "renesas,tmu-r8a7744", "renesas,tmu";
+			reg = <0 0xfff70000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu3: timer@fff80000 {
+			compatible = "renesas,tmu-r8a7744", "renesas,tmu";
+			reg = <0 0xfff80000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
 		thermal: thermal@e61f0000 {
 			compatible = "renesas,thermal-r8a7744",
 				     "renesas,rcar-gen2-thermal";

diff --git a/src/arm/renesas/r8a7745.dtsi b/src/arm/renesas/r8a7745.dtsi
index 44688b8..1682983 100644
--- a/src/arm/renesas/r8a7745.dtsi
+++ b/src/arm/renesas/r8a7745.dtsi

@@ -304,6 +304,64 @@
 			resets = <&cpg 407>;
 		};
 
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a7745", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@fff60000 {
+			compatible = "renesas,tmu-r8a7745", "renesas,tmu";
+			reg = <0 0xfff60000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 111>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 111>;
+			status = "disabled";
+		};
+
+		tmu2: timer@fff70000 {
+			compatible = "renesas,tmu-r8a7745", "renesas,tmu";
+			reg = <0 0xfff70000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu3: timer@fff80000 {
+			compatible = "renesas,tmu-r8a7745", "renesas,tmu";
+			reg = <0 0xfff80000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
 		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";

diff --git a/src/arm/renesas/r8a77470.dtsi b/src/arm/renesas/r8a77470.dtsi
index a5cf663..2375438 100644
--- a/src/arm/renesas/r8a77470.dtsi
+++ b/src/arm/renesas/r8a77470.dtsi

@@ -241,6 +241,50 @@
 			resets = <&cpg 407>;
 		};
 
+		tmu1: timer@fff60000 {
+			compatible = "renesas,tmu-r8a77470", "renesas,tmu";
+			reg = <0 0xfff60000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 111>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 111>;
+			status = "disabled";
+		};
+
+		tmu2: timer@fff70000 {
+			compatible = "renesas,tmu-r8a77470", "renesas,tmu";
+			reg = <0 0xfff70000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu3: timer@fff80000 {
+			compatible = "renesas,tmu-r8a77470", "renesas,tmu";
+			reg = <0 0xfff80000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;

diff --git a/src/arm/renesas/r8a7790.dtsi b/src/arm/renesas/r8a7790.dtsi
index 46fb81f..583b74a 100644
--- a/src/arm/renesas/r8a7790.dtsi
+++ b/src/arm/renesas/r8a7790.dtsi

@@ -434,6 +434,64 @@
 			resets = <&cpg 407>;
 		};
 
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a7790", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@fff60000 {
+			compatible = "renesas,tmu-r8a7790", "renesas,tmu";
+			reg = <0 0xfff60000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 111>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 111>;
+			status = "disabled";
+		};
+
+		tmu2: timer@fff70000 {
+			compatible = "renesas,tmu-r8a7790", "renesas,tmu";
+			reg = <0 0xfff70000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu3: timer@fff80000 {
+			compatible = "renesas,tmu-r8a7790", "renesas,tmu";
+			reg = <0 0xfff80000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
 		thermal: thermal@e61f0000 {
 			compatible = "renesas,thermal-r8a7790",
 				     "renesas,rcar-gen2-thermal",

diff --git a/src/arm/renesas/r8a7791.dtsi b/src/arm/renesas/r8a7791.dtsi
index b9d3414..de08ceb 100644
--- a/src/arm/renesas/r8a7791.dtsi
+++ b/src/arm/renesas/r8a7791.dtsi

@@ -351,6 +351,64 @@
 			resets = <&cpg 407>;
 		};
 
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a7791", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@fff60000 {
+			compatible = "renesas,tmu-r8a7791", "renesas,tmu";
+			reg = <0 0xfff60000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 111>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 111>;
+			status = "disabled";
+		};
+
+		tmu2: timer@fff70000 {
+			compatible = "renesas,tmu-r8a7791", "renesas,tmu";
+			reg = <0 0xfff70000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu3: timer@fff80000 {
+			compatible = "renesas,tmu-r8a7791", "renesas,tmu";
+			reg = <0 0xfff80000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
 		thermal: thermal@e61f0000 {
 			compatible = "renesas,thermal-r8a7791",
 				     "renesas,rcar-gen2-thermal",

diff --git a/src/arm/renesas/r8a7792.dtsi b/src/arm/renesas/r8a7792.dtsi
index ecfab3f..7defeb8 100644
--- a/src/arm/renesas/r8a7792.dtsi
+++ b/src/arm/renesas/r8a7792.dtsi

@@ -351,6 +351,65 @@
 			resets = <&cpg 407>;
 		};
 
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a7792", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@fff60000 {
+			compatible = "renesas,tmu-r8a7792", "renesas,tmu";
+			reg = <0 0xfff60000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 111>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 111>;
+			status = "disabled";
+		};
+
+		tmu2: timer@fff70000 {
+			compatible = "renesas,tmu-r8a7792", "renesas,tmu";
+			reg = <0 0xfff70000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu3: timer@fff80000 {
+			compatible = "renesas,tmu-r8a7792", "renesas,tmu";
+			reg = <0 0xfff80000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;

diff --git a/src/arm/renesas/r8a7793.dtsi b/src/arm/renesas/r8a7793.dtsi
index f51bf68..d32a9d5 100644
--- a/src/arm/renesas/r8a7793.dtsi
+++ b/src/arm/renesas/r8a7793.dtsi

@@ -326,6 +326,64 @@
 			resets = <&cpg 407>;
 		};
 
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a7793", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@fff60000 {
+			compatible = "renesas,tmu-r8a7793", "renesas,tmu";
+			reg = <0 0xfff60000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 111>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 111>;
+			status = "disabled";
+		};
+
+		tmu2: timer@fff70000 {
+			compatible = "renesas,tmu-r8a7793", "renesas,tmu";
+			reg = <0 0xfff70000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu3: timer@fff80000 {
+			compatible = "renesas,tmu-r8a7793", "renesas,tmu";
+			reg = <0 0xfff80000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
 		thermal: thermal@e61f0000 {
 			compatible = "renesas,thermal-r8a7793",
 				     "renesas,rcar-gen2-thermal",

diff --git a/src/arm/renesas/r8a7794.dtsi b/src/arm/renesas/r8a7794.dtsi
index 371dd47..f37f094 100644
--- a/src/arm/renesas/r8a7794.dtsi
+++ b/src/arm/renesas/r8a7794.dtsi

@@ -292,6 +292,64 @@
 			resets = <&cpg 407>;
 		};
 
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a7794", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@fff60000 {
+			compatible = "renesas,tmu-r8a7794", "renesas,tmu";
+			reg = <0 0xfff60000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 111>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 111>;
+			status = "disabled";
+		};
+
+		tmu2: timer@fff70000 {
+			compatible = "renesas,tmu-r8a7794", "renesas,tmu";
+			reg = <0 0xfff70000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu3: timer@fff80000 {
+			compatible = "renesas,tmu-r8a7794", "renesas,tmu";
+			reg = <0 0xfff80000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
 		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";

diff --git a/src/arm/renesas/r9a06g032.dtsi b/src/arm/renesas/r9a06g032.dtsi
index fa63e1a..45f60ee 100644
--- a/src/arm/renesas/r9a06g032.dtsi
+++ b/src/arm/renesas/r9a06g032.dtsi

@@ -319,7 +319,6 @@
 		gmac2: ethernet@44002000 {
 			compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
 			reg = <0x44002000 0x2000>;
-			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;

diff --git a/src/arm/rockchip/rk3066a.dtsi b/src/arm/rockchip/rk3066a.dtsi
index 30139f2..15cbd94 100644
--- a/src/arm/rockchip/rk3066a.dtsi
+++ b/src/arm/rockchip/rk3066a.dtsi

@@ -128,6 +128,7 @@
 		pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
 		power-domains = <&power RK3066_PD_VIO>;
 		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {

diff --git a/src/arm/samsung/exynos3250.dtsi b/src/arm/samsung/exynos3250.dtsi
index 3f1015e..b6c3826 100644
--- a/src/arm/samsung/exynos3250.dtsi
+++ b/src/arm/samsung/exynos3250.dtsi

@@ -826,6 +826,7 @@
 			samsung,spi-src-clk = <0>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi0_bus>;
+			fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -842,6 +843,7 @@
 			samsung,spi-src-clk = <0>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi1_bus>;
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 

diff --git a/src/arm/samsung/exynos4.dtsi b/src/arm/samsung/exynos4.dtsi
index 7f981b5..ed47d0c 100644
--- a/src/arm/samsung/exynos4.dtsi
+++ b/src/arm/samsung/exynos4.dtsi

@@ -621,6 +621,7 @@
 			clock-names = "spi", "spi_busclk0";
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi0_bus>;
+			fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -636,6 +637,7 @@
 			clock-names = "spi", "spi_busclk0";
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi1_bus>;
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 
@@ -651,6 +653,7 @@
 			clock-names = "spi", "spi_busclk0";
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi2_bus>;
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 

diff --git a/src/arm/samsung/exynos4210-smdkv310.dts b/src/arm/samsung/exynos4210-smdkv310.dts
index b566f87..18f4f49 100644
--- a/src/arm/samsung/exynos4210-smdkv310.dts
+++ b/src/arm/samsung/exynos4210-smdkv310.dts

@@ -88,7 +88,7 @@
 &keypad {
 	samsung,keypad-num-rows = <2>;
 	samsung,keypad-num-columns = <8>;
-	linux,keypad-no-autorepeat;
+	linux,input-no-autorepeat;
 	wakeup-source;
 	pinctrl-names = "default";
 	pinctrl-0 = <&keypad_rows &keypad_cols>;

diff --git a/src/arm/samsung/exynos4212-tab3.dtsi b/src/arm/samsung/exynos4212-tab3.dtsi
index e5254e3..9bc0596 100644
--- a/src/arm/samsung/exynos4212-tab3.dtsi
+++ b/src/arm/samsung/exynos4212-tab3.dtsi

@@ -45,6 +45,12 @@
 		/* Default S-BOOT bootloader loads initramfs here */
 		linux,initrd-start = <0x42000000>;
 		linux,initrd-end = <0x42800000>;
+
+		/*
+		 * Stock bootloader provides incorrect memory size in ATAG_MEM;
+		 * override it here
+		 */
+		linux,usable-memory-range = <0x40000000 0x3fc00000>;
 	};
 
 	firmware@204f000 {

diff --git a/src/arm/samsung/exynos4412-origen.dts b/src/arm/samsung/exynos4412-origen.dts
index 23b1516..10ab7bc 100644
--- a/src/arm/samsung/exynos4412-origen.dts
+++ b/src/arm/samsung/exynos4412-origen.dts

@@ -453,7 +453,7 @@
 &keypad {
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <2>;
-	linux,keypad-no-autorepeat;
+	linux,input-no-autorepeat;
 	wakeup-source;
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	pinctrl-names = "default";

diff --git a/src/arm/samsung/exynos4412-smdk4412.dts b/src/arm/samsung/exynos4412-smdk4412.dts
index 715dfcb..c83fb25 100644
--- a/src/arm/samsung/exynos4412-smdk4412.dts
+++ b/src/arm/samsung/exynos4412-smdk4412.dts

@@ -69,7 +69,7 @@
 &keypad {
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <8>;
-	linux,keypad-no-autorepeat;
+	linux,input-no-autorepeat;
 	wakeup-source;
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	pinctrl-names = "default";
@@ -105,31 +105,31 @@
 		linux,code = <6>;
 	};
 
-	key-A {
+	key-a {
 		keypad,row = <2>;
 		keypad,column = <6>;
 		linux,code = <30>;
 	};
 
-	key-B {
+	key-b {
 		keypad,row = <2>;
 		keypad,column = <7>;
 		linux,code = <48>;
 	};
 
-	key-C {
+	key-c {
 		keypad,row = <0>;
 		keypad,column = <5>;
 		linux,code = <46>;
 	};
 
-	key-D {
+	key-d {
 		keypad,row = <2>;
 		keypad,column = <5>;
 		linux,code = <32>;
 	};
 
-	key-E {
+	key-e {
 		keypad,row = <0>;
 		keypad,column = <7>;
 		linux,code = <18>;

diff --git a/src/arm/samsung/exynos5250.dtsi b/src/arm/samsung/exynos5250.dtsi
index 99c84be..b9e7c49 100644
--- a/src/arm/samsung/exynos5250.dtsi
+++ b/src/arm/samsung/exynos5250.dtsi

@@ -511,6 +511,7 @@
 			clock-names = "spi", "spi_busclk0";
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi0_bus>;
+			fifo-depth = <256>;
 		};
 
 		spi_1: spi@12d30000 {
@@ -526,6 +527,7 @@
 			clock-names = "spi", "spi_busclk0";
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi1_bus>;
+			fifo-depth = <64>;
 		};
 
 		spi_2: spi@12d40000 {
@@ -541,6 +543,7 @@
 			clock-names = "spi", "spi_busclk0";
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi2_bus>;
+			fifo-depth = <64>;
 		};
 
 		mmc_0: mmc@12200000 {

diff --git a/src/arm/samsung/exynos5420.dtsi b/src/arm/samsung/exynos5420.dtsi
index 25ed903..196c6d0 100644
--- a/src/arm/samsung/exynos5420.dtsi
+++ b/src/arm/samsung/exynos5420.dtsi

@@ -658,6 +658,7 @@
 			pinctrl-0 = <&spi0_bus>;
 			clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
 			clock-names = "spi", "spi_busclk0";
+			fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -674,6 +675,7 @@
 			pinctrl-0 = <&spi1_bus>;
 			clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
 			clock-names = "spi", "spi_busclk0";
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 
@@ -690,6 +692,7 @@
 			pinctrl-0 = <&spi2_bus>;
 			clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
 			clock-names = "spi", "spi_busclk0";
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 

diff --git a/src/arm/samsung/exynos5800-peach-pi.dts b/src/arm/samsung/exynos5800-peach-pi.dts
index 9bbbdce..bb01986 100644
--- a/src/arm/samsung/exynos5800-peach-pi.dts
+++ b/src/arm/samsung/exynos5800-peach-pi.dts

@@ -185,7 +185,7 @@
 	samsung,color-depth = <1>;
 	samsung,link-rate = <0x0a>;
 	samsung,lane-count = <2>;
-	samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
 
 	ports {
 		port {

diff --git a/src/arm/samsung/s5pv210.dtsi b/src/arm/samsung/s5pv210.dtsi
index ed560c9..34e8a3d 100644
--- a/src/arm/samsung/s5pv210.dtsi
+++ b/src/arm/samsung/s5pv210.dtsi

@@ -72,7 +72,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		onenand: onenand@b0600000 {
+		onenand: nand-controller@b0600000 {
 			compatible = "samsung,s5pv210-onenand";
 			reg = <0xb0600000 0x2000>,
 				<0xb0000000 0x20000>,
@@ -82,7 +82,7 @@
 			clocks = <&clocks CLK_NANDXL>, <&clocks DOUT_FLASH>;
 			clock-names = "bus", "onenand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -161,6 +161,7 @@
 			pinctrl-0 = <&spi0_bus>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -177,6 +178,7 @@
 			pinctrl-0 = <&spi1_bus>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 

diff --git a/src/arm/st/stm32f746.dtsi b/src/arm/st/stm32f746.dtsi
index 65c72b6..2537b3d 100644
--- a/src/arm/st/stm32f746.dtsi
+++ b/src/arm/st/stm32f746.dtsi

@@ -257,23 +257,6 @@
 			status = "disabled";
 		};
 
-		can3: can@40003400 {
-			compatible = "st,stm32f4-bxcan";
-			reg = <0x40003400 0x200>;
-			interrupts = <104>, <105>, <106>, <107>;
-			interrupt-names = "tx", "rx0", "rx1", "sce";
-			resets = <&rcc STM32F7_APB1_RESET(CAN3)>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
-			st,gcan = <&gcan3>;
-			status = "disabled";
-		};
-
-		gcan3: gcan@40003600 {
-			compatible = "st,stm32f4-gcan", "syscon";
-			reg = <0x40003600 0x200>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
-		};
-
 		spi2: spi@40003800 {
 			#address-cells = <1>;
 			#size-cells = <0>;

diff --git a/src/arm/st/stm32f769.dtsi b/src/arm/st/stm32f769.dtsi
index 4e7d903..e8cbb99 100644
--- a/src/arm/st/stm32f769.dtsi
+++ b/src/arm/st/stm32f769.dtsi

@@ -7,6 +7,23 @@
 
 / {
 	soc {
+		can3: can@40003400 {
+			compatible = "st,stm32f4-bxcan";
+			reg = <0x40003400 0x200>;
+			interrupts = <104>, <105>, <106>, <107>;
+			interrupt-names = "tx", "rx0", "rx1", "sce";
+			resets = <&rcc STM32F7_APB1_RESET(CAN3)>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
+			st,gcan = <&gcan3>;
+			status = "disabled";
+		};
+
+		gcan3: gcan@40003600 {
+			compatible = "st,stm32f4-gcan", "syscon";
+			reg = <0x40003600 0x200>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
+		};
+
 		dsi: dsi@40016c00 {
 			compatible = "st,stm32-dsi";
 			reg = <0x40016c00 0x800>;

diff --git a/src/arm/st/stm32mp13-pinctrl.dtsi b/src/arm/st/stm32mp13-pinctrl.dtsi
index 27e0c38..32c5d8a 100644
--- a/src/arm/st/stm32mp13-pinctrl.dtsi
+++ b/src/arm/st/stm32mp13-pinctrl.dtsi

@@ -47,6 +47,63 @@
 		};
 	};
 
+	ltdc_pins_a: ltdc-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D',  9, AF13)>, /* LCD_CLK */
+				 <STM32_PINMUX('C',  6, AF14)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('G',  4, AF11)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('H',  9, AF11)>, /* LCD_DE */
+				 <STM32_PINMUX('G',  7, AF14)>, /* LCD_R2 */
+				 <STM32_PINMUX('B', 12, AF13)>, /* LCD_R3 */
+				 <STM32_PINMUX('D', 14, AF14)>, /* LCD_R4 */
+				 <STM32_PINMUX('E',  7, AF14)>, /* LCD_R5 */
+				 <STM32_PINMUX('E', 13, AF14)>, /* LCD_R6 */
+				 <STM32_PINMUX('E',  9, AF14)>, /* LCD_R7 */
+				 <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
+				 <STM32_PINMUX('F',  3, AF14)>, /* LCD_G3 */
+				 <STM32_PINMUX('D',  5, AF14)>, /* LCD_G4 */
+				 <STM32_PINMUX('G',  0, AF14)>, /* LCD_G5 */
+				 <STM32_PINMUX('C',  7, AF14)>, /* LCD_G6 */
+				 <STM32_PINMUX('A', 15, AF11)>, /* LCD_G7 */
+				 <STM32_PINMUX('D', 10, AF14)>, /* LCD_B2 */
+				 <STM32_PINMUX('F',  2, AF14)>, /* LCD_B3 */
+				 <STM32_PINMUX('H', 14, AF11)>, /* LCD_B4 */
+				 <STM32_PINMUX('E',  0, AF14)>, /* LCD_B5 */
+				 <STM32_PINMUX('B',  6, AF7)>,  /* LCD_B6 */
+				 <STM32_PINMUX('F',  1, AF13)>; /* LCD_B7 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	ltdc_sleep_pins_a: ltdc-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D',  9, ANALOG)>, /* LCD_CLK */
+				 <STM32_PINMUX('C',  6, ANALOG)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('G',  4, ANALOG)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('H',  9, ANALOG)>, /* LCD_DE */
+				 <STM32_PINMUX('G',  7, ANALOG)>, /* LCD_R2 */
+				 <STM32_PINMUX('B', 12, ANALOG)>, /* LCD_R3 */
+				 <STM32_PINMUX('D', 14, ANALOG)>, /* LCD_R4 */
+				 <STM32_PINMUX('E',  7, ANALOG)>, /* LCD_R5 */
+				 <STM32_PINMUX('E', 13, ANALOG)>, /* LCD_R6 */
+				 <STM32_PINMUX('E',  9, ANALOG)>, /* LCD_R7 */
+				 <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
+				 <STM32_PINMUX('F',  3, ANALOG)>, /* LCD_G3 */
+				 <STM32_PINMUX('D',  5, ANALOG)>, /* LCD_G4 */
+				 <STM32_PINMUX('G',  0, ANALOG)>, /* LCD_G5 */
+				 <STM32_PINMUX('C',  7, ANALOG)>, /* LCD_G6 */
+				 <STM32_PINMUX('A', 15, ANALOG)>, /* LCD_G7 */
+				 <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B2 */
+				 <STM32_PINMUX('F',  2, ANALOG)>, /* LCD_B3 */
+				 <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_B4 */
+				 <STM32_PINMUX('E',  0, ANALOG)>, /* LCD_B5 */
+				 <STM32_PINMUX('B',  6, ANALOG)>, /* LCD_B6 */
+				 <STM32_PINMUX('F',  1, ANALOG)>; /* LCD_B7 */
+		};
+	};
+
 	mcp23017_pins_a: mcp23017-0 {
 		pins {
 			pinmux = <STM32_PINMUX('G', 12, GPIO)>;

diff --git a/src/arm/st/stm32mp131.dtsi b/src/arm/st/stm32mp131.dtsi
index 3900f32..6704cee 100644
--- a/src/arm/st/stm32mp131.dtsi
+++ b/src/arm/st/stm32mp131.dtsi

@@ -745,340 +745,6 @@
 			dma-channels = <16>;
 		};
 
-		adc_2: adc@48004000 {
-			compatible = "st,stm32mp13-adc-core";
-			reg = <0x48004000 0x400>;
-			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc ADC2>, <&rcc ADC2_K>;
-			clock-names = "bus", "adc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			adc2: adc@0 {
-				compatible = "st,stm32mp13-adc";
-				#io-channel-cells = <1>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x0>;
-				interrupt-parent = <&adc_2>;
-				interrupts = <0>;
-				dmas = <&dmamux1 10 0x400 0x80000001>;
-				dma-names = "rx";
-				status = "disabled";
-
-				channel@13 {
-					reg = <13>;
-					label = "vrefint";
-				};
-				channel@14 {
-					reg = <14>;
-					label = "vddcore";
-				};
-				channel@16 {
-					reg = <16>;
-					label = "vddcpu";
-				};
-				channel@17 {
-					reg = <17>;
-					label = "vddq_ddr";
-				};
-			};
-		};
-
-		usbotg_hs: usb@49000000 {
-			compatible = "st,stm32mp15-hsotg", "snps,dwc2";
-			reg = <0x49000000 0x40000>;
-			clocks = <&rcc USBO_K>;
-			clock-names = "otg";
-			resets = <&rcc USBO_R>;
-			reset-names = "dwc2";
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			g-rx-fifo-size = <512>;
-			g-np-tx-fifo-size = <32>;
-			g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
-			dr_mode = "otg";
-			otg-rev = <0x200>;
-			usb33d-supply = <&scmi_usb33>;
-			status = "disabled";
-		};
-
-		usart1: serial@4c000000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x4c000000 0x400>;
-			interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc USART1_K>;
-			resets = <&rcc USART1_R>;
-			wakeup-source;
-			dmas = <&dmamux1 41 0x400 0x5>,
-			       <&dmamux1 42 0x400 0x1>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		usart2: serial@4c001000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x4c001000 0x400>;
-			interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc USART2_K>;
-			resets = <&rcc USART2_R>;
-			wakeup-source;
-			dmas = <&dmamux1 43 0x400 0x5>,
-			       <&dmamux1 44 0x400 0x1>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		i2s4: audio-controller@4c002000 {
-			compatible = "st,stm32h7-i2s";
-			reg = <0x4c002000 0x400>;
-			#sound-dai-cells = <0>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&dmamux1 83 0x400 0x01>,
-			       <&dmamux1 84 0x400 0x01>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		spi4: spi@4c002000 {
-			compatible = "st,stm32h7-spi";
-			reg = <0x4c002000 0x400>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc SPI4_K>;
-			resets = <&rcc SPI4_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			dmas = <&dmamux1 83 0x400 0x01>,
-			       <&dmamux1 84 0x400 0x01>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		spi5: spi@4c003000 {
-			compatible = "st,stm32h7-spi";
-			reg = <0x4c003000 0x400>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc SPI5_K>;
-			resets = <&rcc SPI5_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			dmas = <&dmamux1 85 0x400 0x01>,
-			       <&dmamux1 86 0x400 0x01>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		i2c3: i2c@4c004000 {
-			compatible = "st,stm32mp13-i2c";
-			reg = <0x4c004000 0x400>;
-			interrupt-names = "event", "error";
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc I2C3_K>;
-			resets = <&rcc I2C3_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			dmas = <&dmamux1 73 0x400 0x1>,
-			       <&dmamux1 74 0x400 0x1>;
-			dma-names = "rx", "tx";
-			st,syscfg-fmp = <&syscfg 0x4 0x4>;
-			i2c-analog-filter;
-			status = "disabled";
-		};
-
-		i2c4: i2c@4c005000 {
-			compatible = "st,stm32mp13-i2c";
-			reg = <0x4c005000 0x400>;
-			interrupt-names = "event", "error";
-			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc I2C4_K>;
-			resets = <&rcc I2C4_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			dmas = <&dmamux1 75 0x400 0x1>,
-			       <&dmamux1 76 0x400 0x1>;
-			dma-names = "rx", "tx";
-			st,syscfg-fmp = <&syscfg 0x4 0x8>;
-			i2c-analog-filter;
-			status = "disabled";
-		};
-
-		i2c5: i2c@4c006000 {
-			compatible = "st,stm32mp13-i2c";
-			reg = <0x4c006000 0x400>;
-			interrupt-names = "event", "error";
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc I2C5_K>;
-			resets = <&rcc I2C5_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			dmas = <&dmamux1 115 0x400 0x1>,
-			       <&dmamux1 116 0x400 0x1>;
-			dma-names = "rx", "tx";
-			st,syscfg-fmp = <&syscfg 0x4 0x10>;
-			i2c-analog-filter;
-			status = "disabled";
-		};
-
-		timers12: timer@4c007000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x4c007000 0x400>;
-			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global";
-			clocks = <&rcc TIM12_K>;
-			clock-names = "int";
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			timer@11 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <11>;
-				status = "disabled";
-			};
-		};
-
-		timers13: timer@4c008000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x4c008000 0x400>;
-			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global";
-			clocks = <&rcc TIM13_K>;
-			clock-names = "int";
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			timer@12 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <12>;
-				status = "disabled";
-			};
-		};
-
-		timers14: timer@4c009000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x4c009000 0x400>;
-			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global";
-			clocks = <&rcc TIM14_K>;
-			clock-names = "int";
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			timer@13 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <13>;
-				status = "disabled";
-			};
-		};
-
-		timers15: timer@4c00a000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x4c00a000 0x400>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global";
-			clocks = <&rcc TIM15_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 105 0x400 0x1>,
-			       <&dmamux1 106 0x400 0x1>,
-			       <&dmamux1 107 0x400 0x1>,
-			       <&dmamux1 108 0x400 0x1>;
-			dma-names = "ch1", "up", "trig", "com";
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			timer@14 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <14>;
-				status = "disabled";
-			};
-		};
-
-		timers16: timer@4c00b000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x4c00b000 0x400>;
-			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global";
-			clocks = <&rcc TIM16_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 109 0x400 0x1>,
-			       <&dmamux1 110 0x400 0x1>;
-			dma-names = "ch1", "up";
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			timer@15 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <15>;
-				status = "disabled";
-			};
-		};
-
-		timers17: timer@4c00c000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x4c00c000 0x400>;
-			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global";
-			clocks = <&rcc TIM17_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 111 0x400 0x1>,
-			       <&dmamux1 112 0x400 0x1>;
-			dma-names = "ch1", "up";
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			timer@16 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <16>;
-				status = "disabled";
-			};
-		};
-
 		rcc: rcc@50000000 {
 			compatible = "st,stm32mp13-rcc", "syscon";
 			reg = <0x50000000 0x1000>;
@@ -1092,80 +758,113 @@
 				 <&scmi_clk CK_SCMI_LSI>;
 		};
 
-		exti: interrupt-controller@5000d000 {
-			compatible = "st,stm32mp13-exti", "syscon";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x5000d000 0x400>;
-		};
-
-		syscfg: syscon@50020000 {
-			compatible = "st,stm32mp157-syscfg", "syscon";
-			reg = <0x50020000 0x400>;
-			clocks = <&rcc SYSCFG>;
-		};
-
-		lptimer2: timer@50021000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-lptimer";
-			reg = <0x50021000 0x400>;
-			interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc LPTIM2_K>;
-			clock-names = "mux";
-			wakeup-source;
+		pwr_regulators: pwr@50001000 {
+			compatible = "st,stm32mp1,pwr-reg";
+			reg = <0x50001000 0x10>;
 			status = "disabled";
 
-			pwm {
-				compatible = "st,stm32-pwm-lp";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			trigger@1 {
-				compatible = "st,stm32-lptimer-trigger";
-				reg = <1>;
-				status = "disabled";
+			reg11: reg11 {
+				regulator-name = "reg11";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
 			};
 
-			counter {
-				compatible = "st,stm32-lptimer-counter";
-				status = "disabled";
+			reg18: reg18 {
+				regulator-name = "reg18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
 			};
 
-			timer {
-				compatible = "st,stm32-lptimer-timer";
-				status = "disabled";
+			usb33: usb33 {
+				regulator-name = "usb33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 			};
 		};
 
-		lptimer3: timer@50022000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-lptimer";
-			reg = <0x50022000 0x400>;
-			interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc LPTIM3_K>;
-			clock-names = "mux";
-			wakeup-source;
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm-lp";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			trigger@2 {
-				compatible = "st,stm32-lptimer-trigger";
-				reg = <2>;
-				status = "disabled";
-			};
+		exti: interrupt-controller@5000d000 {
+			compatible = "st,stm32mp1-exti", "syscon";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x5000d000 0x400>;
+			interrupts-extended =
+				<&intc GIC_SPI 6   IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_0 */
+				<&intc GIC_SPI 7   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 8   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 9   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 10  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 24  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 65  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 66  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 67  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 68  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 41  IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_10 */
+				<&intc GIC_SPI 43  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 77  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 78  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 1   IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 3   IRQ_TYPE_LEVEL_HIGH>,
+				<0>,						/* EXTI_20 */
+				<&intc GIC_SPI 32  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 34  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 73  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 93  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 38  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 39  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 40  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 72  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 53  IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_30 */
+				<&intc GIC_SPI 54  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 83  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 84  IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,						/* EXTI_40 */
+				<0>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 96  IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 92  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<&intc GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_50 */
+				<0>,
+				<&intc GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,						/* EXTI_60 */
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 63  IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<&intc GIC_SPI 98  IRQ_TYPE_LEVEL_HIGH>;	/* EXTI_70 */
+		};
 
-			timer {
-				compatible = "st,stm32-lptimer-timer";
-				status = "disabled";
-			};
+		syscfg: syscon@50020000 {
+			compatible = "st,stm32mp157-syscfg", "syscon";
+			reg = <0x50020000 0x400>;
+			clocks = <&rcc SYSCFG>;
 		};
 
 		lptimer4: timer@50023000 {
@@ -1210,25 +909,6 @@
 			};
 		};
 
-		hash: hash@54003000 {
-			compatible = "st,stm32mp13-hash";
-			reg = <0x54003000 0x400>;
-			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc HASH1>;
-			resets = <&rcc HASH1_R>;
-			dmas = <&mdma 30 0x2 0x1000a02 0x0 0x0>;
-			dma-names = "in";
-			status = "disabled";
-		};
-
-		rng: rng@54004000 {
-			compatible = "st,stm32mp13-rng";
-			reg = <0x54004000 0x400>;
-			clocks = <&rcc RNG1_K>;
-			resets = <&rcc RNG1_R>;
-			status = "disabled";
-		};
-
 		mdma: dma-controller@58000000 {
 			compatible = "st,stm32h7-mdma";
 			reg = <0x58000000 0x1000>;
@@ -1239,82 +919,6 @@
 			dma-requests = <48>;
 		};
 
-		fmc: memory-controller@58002000 {
-			compatible = "st,stm32mp1-fmc2-ebi";
-			reg = <0x58002000 0x1000>;
-			ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
-				 <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
-				 <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
-				 <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
-				 <4 0 0x80000000 0x10000000>; /* NAND */
-			#address-cells = <2>;
-			#size-cells = <1>;
-			clocks = <&rcc FMC_K>;
-			resets = <&rcc FMC_R>;
-			status = "disabled";
-
-			nand-controller@4,0 {
-				compatible = "st,stm32mp1-fmc2-nfc";
-				reg = <4 0x00000000 0x1000>,
-				      <4 0x08010000 0x1000>,
-				      <4 0x08020000 0x1000>,
-				      <4 0x01000000 0x1000>,
-				      <4 0x09010000 0x1000>,
-				      <4 0x09020000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&mdma 24 0x2 0x12000a02 0x0 0x0>,
-				       <&mdma 24 0x2 0x12000a08 0x0 0x0>,
-				       <&mdma 25 0x2 0x12000a0a 0x0 0x0>;
-				dma-names = "tx", "rx", "ecc";
-				status = "disabled";
-			};
-		};
-
-		qspi: spi@58003000 {
-			compatible = "st,stm32f469-qspi";
-			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
-			reg-names = "qspi", "qspi_mm";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>,
-			       <&mdma 26 0x2 0x10100008 0x0 0x0>;
-			dma-names = "tx", "rx";
-			clocks = <&rcc QSPI_K>;
-			resets = <&rcc QSPI_R>;
-			status = "disabled";
-		};
-
-		sdmmc1: mmc@58005000 {
-			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x20253180>;
-			reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
-			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc SDMMC1_K>;
-			clock-names = "apb_pclk";
-			resets = <&rcc SDMMC1_R>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			max-frequency = <130000000>;
-			status = "disabled";
-		};
-
-		sdmmc2: mmc@58007000 {
-			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x20253180>;
-			reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc SDMMC2_K>;
-			clock-names = "apb_pclk";
-			resets = <&rcc SDMMC2_R>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			max-frequency = <130000000>;
-			status = "disabled";
-		};
-
 		crc1: crc@58009000 {
 			compatible = "st,stm32f7-crc";
 			reg = <0x58009000 0x400>;
@@ -1349,29 +953,6 @@
 			status = "disabled";
 		};
 
-		usbphyc: usbphyc@5a006000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#clock-cells = <0>;
-			compatible = "st,stm32mp1-usbphyc";
-			reg = <0x5a006000 0x1000>;
-			clocks = <&rcc USBPHY_K>;
-			resets = <&rcc USBPHY_R>;
-			vdda1v1-supply = <&scmi_reg11>;
-			vdda1v8-supply = <&scmi_reg18>;
-			status = "disabled";
-
-			usbphyc_port0: usb-phy@0 {
-				#phy-cells = <0>;
-				reg = <0>;
-			};
-
-			usbphyc_port1: usb-phy@1 {
-				#phy-cells = <1>;
-				reg = <1>;
-			};
-		};
-
 		rtc: rtc@5c004000 {
 			compatible = "st,stm32mp1-rtc";
 			reg = <0x5c004000 0x400>;
@@ -1400,6 +981,555 @@
 			};
 		};
 
+		etzpc: bus@5c007000 {
+			compatible = "st,stm32-etzpc", "simple-bus";
+			reg = <0x5c007000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#access-controller-cells = <1>;
+			ranges;
+
+			adc_2: adc@48004000 {
+				compatible = "st,stm32mp13-adc-core";
+				reg = <0x48004000 0x400>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc ADC2>, <&rcc ADC2_K>;
+				clock-names = "bus", "adc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&etzpc 33>;
+				status = "disabled";
+
+				adc2: adc@0 {
+					compatible = "st,stm32mp13-adc";
+					#io-channel-cells = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+					interrupt-parent = <&adc_2>;
+					interrupts = <0>;
+					dmas = <&dmamux1 10 0x400 0x80000001>;
+					dma-names = "rx";
+					status = "disabled";
+
+					channel@13 {
+						reg = <13>;
+						label = "vrefint";
+					};
+					channel@14 {
+						reg = <14>;
+						label = "vddcore";
+					};
+					channel@16 {
+						reg = <16>;
+						label = "vddcpu";
+					};
+					channel@17 {
+						reg = <17>;
+						label = "vddq_ddr";
+					};
+				};
+			};
+
+			usbotg_hs: usb@49000000 {
+				compatible = "st,stm32mp15-hsotg", "snps,dwc2";
+				reg = <0x49000000 0x40000>;
+				clocks = <&rcc USBO_K>;
+				clock-names = "otg";
+				resets = <&rcc USBO_R>;
+				reset-names = "dwc2";
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				g-rx-fifo-size = <512>;
+				g-np-tx-fifo-size = <32>;
+				g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
+				dr_mode = "otg";
+				otg-rev = <0x200>;
+				usb33d-supply = <&scmi_usb33>;
+				access-controllers = <&etzpc 34>;
+				status = "disabled";
+			};
+
+			usart1: serial@4c000000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x4c000000 0x400>;
+				interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc USART1_K>;
+				resets = <&rcc USART1_R>;
+				wakeup-source;
+				dmas = <&dmamux1 41 0x400 0x5>,
+				<&dmamux1 42 0x400 0x1>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 16>;
+				status = "disabled";
+			};
+
+			usart2: serial@4c001000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x4c001000 0x400>;
+				interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc USART2_K>;
+				resets = <&rcc USART2_R>;
+				wakeup-source;
+				dmas = <&dmamux1 43 0x400 0x5>,
+				<&dmamux1 44 0x400 0x1>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 17>;
+				status = "disabled";
+			};
+
+			i2s4: audio-controller@4c002000 {
+				compatible = "st,stm32h7-i2s";
+				reg = <0x4c002000 0x400>;
+				#sound-dai-cells = <0>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 83 0x400 0x01>,
+				<&dmamux1 84 0x400 0x01>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 13>;
+				status = "disabled";
+			};
+
+			spi4: spi@4c002000 {
+				compatible = "st,stm32h7-spi";
+				reg = <0x4c002000 0x400>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc SPI4_K>;
+				resets = <&rcc SPI4_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dmamux1 83 0x400 0x01>,
+				       <&dmamux1 84 0x400 0x01>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 18>;
+				status = "disabled";
+			};
+
+			spi5: spi@4c003000 {
+				compatible = "st,stm32h7-spi";
+				reg = <0x4c003000 0x400>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc SPI5_K>;
+				resets = <&rcc SPI5_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dmamux1 85 0x400 0x01>,
+				       <&dmamux1 86 0x400 0x01>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 19>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@4c004000 {
+				compatible = "st,stm32mp13-i2c";
+				reg = <0x4c004000 0x400>;
+				interrupt-names = "event", "error";
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc I2C3_K>;
+				resets = <&rcc I2C3_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dmamux1 73 0x400 0x1>,
+				       <&dmamux1 74 0x400 0x1>;
+				dma-names = "rx", "tx";
+				st,syscfg-fmp = <&syscfg 0x4 0x4>;
+				i2c-analog-filter;
+				access-controllers = <&etzpc 20>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@4c005000 {
+				compatible = "st,stm32mp13-i2c";
+				reg = <0x4c005000 0x400>;
+				interrupt-names = "event", "error";
+				interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc I2C4_K>;
+				resets = <&rcc I2C4_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dmamux1 75 0x400 0x1>,
+				       <&dmamux1 76 0x400 0x1>;
+				dma-names = "rx", "tx";
+				st,syscfg-fmp = <&syscfg 0x4 0x8>;
+				i2c-analog-filter;
+				access-controllers = <&etzpc 21>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@4c006000 {
+				compatible = "st,stm32mp13-i2c";
+				reg = <0x4c006000 0x400>;
+				interrupt-names = "event", "error";
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc I2C5_K>;
+				resets = <&rcc I2C5_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dmamux1 115 0x400 0x1>,
+				       <&dmamux1 116 0x400 0x1>;
+				dma-names = "rx", "tx";
+				st,syscfg-fmp = <&syscfg 0x4 0x10>;
+				i2c-analog-filter;
+				access-controllers = <&etzpc 22>;
+				status = "disabled";
+			};
+
+			timers12: timer@4c007000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x4c007000 0x400>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM12_K>;
+				clock-names = "int";
+				access-controllers = <&etzpc 23>;
+				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@11 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <11>;
+					status = "disabled";
+				};
+			};
+
+			timers13: timer@4c008000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x4c008000 0x400>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM13_K>;
+				clock-names = "int";
+				access-controllers = <&etzpc 24>;
+				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@12 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <12>;
+					status = "disabled";
+				};
+			};
+
+			timers14: timer@4c009000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x4c009000 0x400>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM14_K>;
+				clock-names = "int";
+				access-controllers = <&etzpc 25>;
+				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@13 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <13>;
+					status = "disabled";
+				};
+			};
+
+			timers15: timer@4c00a000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x4c00a000 0x400>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM15_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 105 0x400 0x1>,
+				<&dmamux1 106 0x400 0x1>,
+				<&dmamux1 107 0x400 0x1>,
+				<&dmamux1 108 0x400 0x1>;
+				dma-names = "ch1", "up", "trig", "com";
+				access-controllers = <&etzpc 26>;
+				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@14 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <14>;
+					status = "disabled";
+				};
+			};
+
+			timers16: timer@4c00b000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x4c00b000 0x400>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM16_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 109 0x400 0x1>,
+				<&dmamux1 110 0x400 0x1>;
+				dma-names = "ch1", "up";
+				access-controllers = <&etzpc 27>;
+				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@15 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <15>;
+					status = "disabled";
+				};
+			};
+
+			timers17: timer@4c00c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x4c00c000 0x400>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM17_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 111 0x400 0x1>,
+				       <&dmamux1 112 0x400 0x1>;
+				dma-names = "ch1", "up";
+				access-controllers = <&etzpc 28>;
+				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@16 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <16>;
+					status = "disabled";
+				};
+			};
+
+			lptimer2: timer@50021000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-lptimer";
+				reg = <0x50021000 0x400>;
+				interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc LPTIM2_K>;
+				clock-names = "mux";
+				wakeup-source;
+				access-controllers = <&etzpc 1>;
+				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				trigger@1 {
+					compatible = "st,stm32-lptimer-trigger";
+					reg = <1>;
+					status = "disabled";
+				};
+
+				counter {
+					compatible = "st,stm32-lptimer-counter";
+					status = "disabled";
+				};
+
+				timer {
+					compatible = "st,stm32-lptimer-timer";
+					status = "disabled";
+				};
+			};
+
+			lptimer3: timer@50022000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-lptimer";
+				reg = <0x50022000 0x400>;
+				interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc LPTIM3_K>;
+				clock-names = "mux";
+				wakeup-source;
+				access-controllers = <&etzpc 2>;
+				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				trigger@2 {
+					compatible = "st,stm32-lptimer-trigger";
+					reg = <2>;
+					status = "disabled";
+				};
+
+				timer {
+					compatible = "st,stm32-lptimer-timer";
+					status = "disabled";
+				};
+			};
+
+			hash: hash@54003000 {
+				compatible = "st,stm32mp13-hash";
+				reg = <0x54003000 0x400>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc HASH1>;
+				resets = <&rcc HASH1_R>;
+				dmas = <&mdma 30 0x2 0x1000a02 0x0 0x0>;
+				dma-names = "in";
+				access-controllers = <&etzpc 41>;
+				status = "disabled";
+			};
+
+			rng: rng@54004000 {
+				compatible = "st,stm32mp13-rng";
+				reg = <0x54004000 0x400>;
+				clocks = <&rcc RNG1_K>;
+				resets = <&rcc RNG1_R>;
+				access-controllers = <&etzpc 40>;
+				status = "disabled";
+			};
+
+			fmc: memory-controller@58002000 {
+				compatible = "st,stm32mp1-fmc2-ebi";
+				reg = <0x58002000 0x1000>;
+				ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+					 <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+					 <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+					 <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+					 <4 0 0x80000000 0x10000000>; /* NAND */
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clocks = <&rcc FMC_K>;
+				resets = <&rcc FMC_R>;
+				access-controllers = <&etzpc 54>;
+				status = "disabled";
+
+				nand-controller@4,0 {
+					compatible = "st,stm32mp1-fmc2-nfc";
+					reg = <4 0x00000000 0x1000>,
+					      <4 0x08010000 0x1000>,
+					      <4 0x08020000 0x1000>,
+					      <4 0x01000000 0x1000>,
+					      <4 0x09010000 0x1000>,
+					      <4 0x09020000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&mdma 24 0x2 0x12000a02 0x0 0x0>,
+					       <&mdma 24 0x2 0x12000a08 0x0 0x0>,
+					       <&mdma 25 0x2 0x12000a0a 0x0 0x0>;
+					dma-names = "tx", "rx", "ecc";
+					status = "disabled";
+				};
+			};
+
+			qspi: spi@58003000 {
+				compatible = "st,stm32f469-qspi";
+				reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+				reg-names = "qspi", "qspi_mm";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>,
+				       <&mdma 26 0x2 0x10100008 0x0 0x0>;
+				dma-names = "tx", "rx";
+				clocks = <&rcc QSPI_K>;
+				resets = <&rcc QSPI_R>;
+				access-controllers = <&etzpc 55>;
+				status = "disabled";
+			};
+
+			sdmmc1: mmc@58005000 {
+				compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x20253180>;
+				reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc SDMMC1_K>;
+				clock-names = "apb_pclk";
+				resets = <&rcc SDMMC1_R>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <130000000>;
+				access-controllers = <&etzpc 50>;
+				status = "disabled";
+			};
+
+			sdmmc2: mmc@58007000 {
+				compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x20253180>;
+				reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
+				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc SDMMC2_K>;
+				clock-names = "apb_pclk";
+				resets = <&rcc SDMMC2_R>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <130000000>;
+				access-controllers = <&etzpc 51>;
+				status = "disabled";
+			};
+
+			usbphyc: usbphyc@5a006000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#clock-cells = <0>;
+				compatible = "st,stm32mp1-usbphyc";
+				reg = <0x5a006000 0x1000>;
+				clocks = <&rcc USBPHY_K>;
+				resets = <&rcc USBPHY_R>;
+				vdda1v1-supply = <&scmi_reg11>;
+				vdda1v8-supply = <&scmi_reg18>;
+				access-controllers = <&etzpc 5>;
+				status = "disabled";
+
+				usbphyc_port0: usb-phy@0 {
+					#phy-cells = <0>;
+					reg = <0>;
+				};
+
+				usbphyc_port1: usb-phy@1 {
+					#phy-cells = <1>;
+					reg = <1>;
+				};
+			};
+		};
+
 		/*
 		 * Break node order to solve dependency probe issue between
 		 * pinctrl and exti.

diff --git a/src/arm/st/stm32mp133.dtsi b/src/arm/st/stm32mp133.dtsi
index df451c3..3e394c8 100644
--- a/src/arm/st/stm32mp133.dtsi
+++ b/src/arm/st/stm32mp133.dtsi

@@ -33,35 +33,38 @@
 			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
 			status = "disabled";
 		};
+	};
+};
 
-		adc_1: adc@48003000 {
-			compatible = "st,stm32mp13-adc-core";
-			reg = <0x48003000 0x400>;
-			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc ADC1>, <&rcc ADC1_K>;
-			clock-names = "bus", "adc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
+&etzpc {
+	adc_1: adc@48003000 {
+		compatible = "st,stm32mp13-adc-core";
+		reg = <0x48003000 0x400>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rcc ADC1>, <&rcc ADC1_K>;
+		clock-names = "bus", "adc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		access-controllers = <&etzpc 32>;
+		status = "disabled";
+
+		adc1: adc@0 {
+			compatible = "st,stm32mp13-adc";
+			#io-channel-cells = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			reg = <0x0>;
+			interrupt-parent = <&adc_1>;
+			interrupts = <0>;
+			dmas = <&dmamux1 9 0x400 0x80000001>;
+			dma-names = "rx";
 			status = "disabled";
 
-			adc1: adc@0 {
-				compatible = "st,stm32mp13-adc";
-				#io-channel-cells = <1>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x0>;
-				interrupt-parent = <&adc_1>;
-				interrupts = <0>;
-				dmas = <&dmamux1 9 0x400 0x80000001>;
-				dma-names = "rx";
-				status = "disabled";
-
-				channel@18 {
-					reg = <18>;
-					label = "vrefint";
-				};
+			channel@18 {
+				reg = <18>;
+				label = "vrefint";
 			};
 		};
 	};

diff --git a/src/arm/st/stm32mp135.dtsi b/src/arm/st/stm32mp135.dtsi
index 68d32f9..834a4d5 100644
--- a/src/arm/st/stm32mp135.dtsi
+++ b/src/arm/st/stm32mp135.dtsi

@@ -19,5 +19,16 @@
 			port {
 			};
 		};
+
+		ltdc: display-controller@5a001000 {
+			compatible = "st,stm32-ltdc";
+			reg = <0x5a001000 0x400>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc LTDC_PX>;
+			clock-names = "lcd";
+			resets = <&scmi_reset RST_SCMI_LTDC>;
+			status = "disabled";
+		};
 	};
 };

diff --git a/src/arm/st/stm32mp135f-dk.dts b/src/arm/st/stm32mp135f-dk.dts
index 5217121..567e53a 100644
--- a/src/arm/st/stm32mp135f-dk.dts
+++ b/src/arm/st/stm32mp135f-dk.dts

@@ -66,6 +66,46 @@
 			default-state = "off";
 		};
 	};
+
+	panel_backlight: panel-backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpioe 12 GPIO_ACTIVE_HIGH>;
+		default-on;
+		status = "okay";
+	};
+
+	panel_rgb: panel-rgb {
+		compatible = "rocktech,rk043fn48h";
+		enable-gpios = <&gpioi 7 GPIO_ACTIVE_HIGH>;
+		backlight = <&panel_backlight>;
+		power-supply = <&scmi_v3v3_sw>;
+		status = "okay";
+
+		width-mm = <105>;
+		height-mm = <67>;
+
+		panel-timing {
+			clock-frequency = <10000000>;
+			hactive = <480>;
+			hback-porch = <43>;
+			hfront-porch = <10>;
+			hsync-len = <1>;
+			hsync-active = <0>;
+			vactive = <272>;
+			vback-porch = <26>;
+			vfront-porch = <4>;
+			vsync-len = <10>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			panel_in_rgb: endpoint {
+				remote-endpoint = <&ltdc_out_rgb>;
+			};
+		};
+	};
 };
 
 &adc_1 {
@@ -168,6 +208,19 @@
 	status = "okay";
 };
 
+&ltdc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ltdc_pins_a>;
+	pinctrl-1 = <&ltdc_sleep_pins_a>;
+	status = "okay";
+
+	port {
+		ltdc_out_rgb: endpoint {
+			remote-endpoint = <&panel_in_rgb>;
+		};
+	};
+};
+
 &rtc {
 	status = "okay";
 };

diff --git a/src/arm/st/stm32mp13xc.dtsi b/src/arm/st/stm32mp13xc.dtsi
index 4d00e75..a8bd5fe 100644
--- a/src/arm/st/stm32mp13xc.dtsi
+++ b/src/arm/st/stm32mp13xc.dtsi

@@ -4,15 +4,14 @@
  * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
  */
 
-/ {
-	soc {
-		cryp: crypto@54002000 {
-			compatible = "st,stm32mp1-cryp";
-			reg = <0x54002000 0x400>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc CRYP1>;
-			resets = <&rcc CRYP1_R>;
-			status = "disabled";
-		};
+&etzpc {
+	cryp: crypto@54002000 {
+		compatible = "st,stm32mp1-cryp";
+		reg = <0x54002000 0x400>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rcc CRYP1>;
+		resets = <&rcc CRYP1_R>;
+		access-controllers = <&etzpc 42>;
+		status = "disabled";
 	};
 };

diff --git a/src/arm/st/stm32mp13xf.dtsi b/src/arm/st/stm32mp13xf.dtsi
index 4d00e75..a8bd5fe 100644
--- a/src/arm/st/stm32mp13xf.dtsi
+++ b/src/arm/st/stm32mp13xf.dtsi

@@ -4,15 +4,14 @@
  * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
  */
 
-/ {
-	soc {
-		cryp: crypto@54002000 {
-			compatible = "st,stm32mp1-cryp";
-			reg = <0x54002000 0x400>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc CRYP1>;
-			resets = <&rcc CRYP1_R>;
-			status = "disabled";
-		};
+&etzpc {
+	cryp: crypto@54002000 {
+		compatible = "st,stm32mp1-cryp";
+		reg = <0x54002000 0x400>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rcc CRYP1>;
+		resets = <&rcc CRYP1_R>;
+		access-controllers = <&etzpc 42>;
+		status = "disabled";
 	};
 };

diff --git a/src/arm/st/stm32mp151.dtsi b/src/arm/st/stm32mp151.dtsi
index fa4cbd3..90c5c72 100644
--- a/src/arm/st/stm32mp151.dtsi
+++ b/src/arm/st/stm32mp151.dtsi

@@ -122,1545 +122,1692 @@
 		interrupt-parent = <&intc>;
 		ranges;
 
-		timers2: timer@40000000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x40000000 0x400>;
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global";
-			clocks = <&rcc TIM2_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 18 0x400 0x1>,
-			       <&dmamux1 19 0x400 0x1>,
-			       <&dmamux1 20 0x400 0x1>,
-			       <&dmamux1 21 0x400 0x1>,
-			       <&dmamux1 22 0x400 0x1>;
-			dma-names = "ch1", "ch2", "ch3", "ch4", "up";
+		ipcc: mailbox@4c001000 {
+			compatible = "st,stm32mp1-ipcc";
+			#mbox-cells = <1>;
+			reg = <0x4c001000 0x400>;
+			st,proc-id = <0>;
+			interrupts-extended =
+				<&exti 61 1>,
+				<&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "rx", "tx";
+			clocks = <&rcc IPCC>;
+			wakeup-source;
 			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			timer@1 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <1>;
-				status = "disabled";
-			};
+		};
 
-			counter {
-				compatible = "st,stm32-timer-counter";
-				status = "disabled";
-			};
+		rcc: rcc@50000000 {
+			compatible = "st,stm32mp1-rcc", "syscon";
+			reg = <0x50000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
-		timers3: timer@40001000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x40001000 0x400>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global";
-			clocks = <&rcc TIM3_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 23 0x400 0x1>,
-			       <&dmamux1 24 0x400 0x1>,
-			       <&dmamux1 25 0x400 0x1>,
-			       <&dmamux1 26 0x400 0x1>,
-			       <&dmamux1 27 0x400 0x1>,
-			       <&dmamux1 28 0x400 0x1>;
-			dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
-			status = "disabled";
+		pwr_regulators: pwr@50001000 {
+			compatible = "st,stm32mp1,pwr-reg";
+			reg = <0x50001000 0x10>;
 
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
+			reg11: reg11 {
+				regulator-name = "reg11";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
 			};
 
-			timer@2 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <2>;
-				status = "disabled";
+			reg18: reg18 {
+				regulator-name = "reg18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
 			};
 
-			counter {
-				compatible = "st,stm32-timer-counter";
-				status = "disabled";
+			usb33: usb33 {
+				regulator-name = "usb33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 			};
 		};
 
-		timers4: timer@40002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x40002000 0x400>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global";
-			clocks = <&rcc TIM4_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 29 0x400 0x1>,
-			       <&dmamux1 30 0x400 0x1>,
-			       <&dmamux1 31 0x400 0x1>,
-			       <&dmamux1 32 0x400 0x1>;
-			dma-names = "ch1", "ch2", "ch3", "ch4";
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
+		pwr_mcu: pwr_mcu@50001014 {
+			compatible = "st,stm32mp151-pwr-mcu", "syscon";
+			reg = <0x50001014 0x4>;
+		};
 
-			timer@3 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <3>;
-				status = "disabled";
-			};
+		exti: interrupt-controller@5000d000 {
+			compatible = "st,stm32mp1-exti", "syscon";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x5000d000 0x400>;
+			interrupts-extended =
+				<&intc GIC_SPI 6   IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_0 */
+				<&intc GIC_SPI 7   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 8   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 9   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 10  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 23  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 64  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 65  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 66  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 67  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 40  IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_10 */
+				<&intc GIC_SPI 42  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 76  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 77  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 1   IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 3   IRQ_TYPE_LEVEL_HIGH>,
+				<0>,						/* EXTI_20 */
+				<&intc GIC_SPI 31  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 33  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 72  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 95  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 37  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 38  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 39  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 71  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 52  IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_30 */
+				<&intc GIC_SPI 53  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 82  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 83  IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,						/* EXTI_40 */
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 93  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<&intc GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_50 */
+				<0>,
+				<&intc GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,						/* EXTI_60 */
+				<&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<&intc GIC_SPI 62  IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_70 */
+				<0>,
+				<0>,
+				<&intc GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-			counter {
-				compatible = "st,stm32-timer-counter";
-				status = "disabled";
-			};
+		syscfg: syscon@50020000 {
+			compatible = "st,stm32mp157-syscfg", "syscon";
+			reg = <0x50020000 0x400>;
+			clocks = <&rcc SYSCFG>;
 		};
 
-		timers5: timer@40003000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x40003000 0x400>;
-			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global";
-			clocks = <&rcc TIM5_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 55 0x400 0x1>,
-			       <&dmamux1 56 0x400 0x1>,
-			       <&dmamux1 57 0x400 0x1>,
-			       <&dmamux1 58 0x400 0x1>,
-			       <&dmamux1 59 0x400 0x1>,
-			       <&dmamux1 60 0x400 0x1>;
-			dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
+		dts: thermal@50028000 {
+			compatible = "st,stm32-thermal";
+			reg = <0x50028000 0x100>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc TMPSENS>;
+			clock-names = "pclk";
+			#thermal-sensor-cells = <0>;
 			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			timer@4 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <4>;
-				status = "disabled";
-			};
+		};
 
-			counter {
-				compatible = "st,stm32-timer-counter";
-				status = "disabled";
-			};
+		mdma1: dma-controller@58000000 {
+			compatible = "st,stm32h7-mdma";
+			reg = <0x58000000 0x1000>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc MDMA>;
+			resets = <&rcc MDMA_R>;
+			#dma-cells = <5>;
+			dma-channels = <32>;
+			dma-requests = <48>;
 		};
 
-		timers6: timer@40004000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x40004000 0x400>;
-			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global";
-			clocks = <&rcc TIM6_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 69 0x400 0x1>;
-			dma-names = "up";
+		sdmmc1: mmc@58005000 {
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00253180>;
+			reg = <0x58005000 0x1000>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SDMMC1_K>;
+			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC1_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
 			status = "disabled";
+		};
 
-			timer@5 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <5>;
-				status = "disabled";
-			};
+		sdmmc2: mmc@58007000 {
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00253180>;
+			reg = <0x58007000 0x1000>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SDMMC2_K>;
+			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC2_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+			status = "disabled";
 		};
 
-		timers7: timer@40005000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x40005000 0x400>;
-			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global";
-			clocks = <&rcc TIM7_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 70 0x400 0x1>;
-			dma-names = "up";
+		crc1: crc@58009000 {
+			compatible = "st,stm32f7-crc";
+			reg = <0x58009000 0x400>;
+			clocks = <&rcc CRC1>;
 			status = "disabled";
+		};
 
-			timer@6 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <6>;
-				status = "disabled";
-			};
+		usbh_ohci: usb@5800c000 {
+			compatible = "generic-ohci";
+			reg = <0x5800c000 0x1000>;
+			clocks = <&usbphyc>, <&rcc USBH>;
+			resets = <&rcc USBH_R>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphyc_port0>;
+			phy-names = "usb";
+			status = "disabled";
 		};
 
-		timers12: timer@40006000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x40006000 0x400>;
-			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global";
-			clocks = <&rcc TIM12_K>;
-			clock-names = "int";
+		usbh_ehci: usb@5800d000 {
+			compatible = "generic-ehci";
+			reg = <0x5800d000 0x1000>;
+			clocks = <&usbphyc>, <&rcc USBH>;
+			resets = <&rcc USBH_R>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			companion = <&usbh_ohci>;
+			phys = <&usbphyc_port0>;
+			phy-names = "usb";
 			status = "disabled";
+		};
 
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
+		ltdc: display-controller@5a001000 {
+			compatible = "st,stm32-ltdc";
+			reg = <0x5a001000 0x400>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc LTDC_PX>;
+			clock-names = "lcd";
+			resets = <&rcc LTDC_R>;
+			status = "disabled";
+		};
 
-			timer@11 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <11>;
-				status = "disabled";
-			};
+		iwdg2: watchdog@5a002000 {
+			compatible = "st,stm32mp1-iwdg";
+			reg = <0x5a002000 0x400>;
+			clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
+			clock-names = "pclk", "lsi";
+			status = "disabled";
 		};
 
-		timers13: timer@40007000 {
+		usbphyc: usbphyc@5a006000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x40007000 0x400>;
-			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global";
-			clocks = <&rcc TIM13_K>;
-			clock-names = "int";
+			#clock-cells = <0>;
+			compatible = "st,stm32mp1-usbphyc";
+			reg = <0x5a006000 0x1000>;
+			clocks = <&rcc USBPHY_K>;
+			resets = <&rcc USBPHY_R>;
+			vdda1v1-supply = <&reg11>;
+			vdda1v8-supply = <&reg18>;
 			status = "disabled";
 
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
+			usbphyc_port0: usb-phy@0 {
+				#phy-cells = <0>;
+				reg = <0>;
 			};
 
-			timer@12 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <12>;
-				status = "disabled";
+			usbphyc_port1: usb-phy@1 {
+				#phy-cells = <1>;
+				reg = <1>;
 			};
 		};
 
-		timers14: timer@40008000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x40008000 0x400>;
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global";
-			clocks = <&rcc TIM14_K>;
-			clock-names = "int";
+		rtc: rtc@5c004000 {
+			compatible = "st,stm32mp1-rtc";
+			reg = <0x5c004000 0x400>;
+			clocks = <&rcc RTCAPB>, <&rcc RTC>;
+			clock-names = "pclk", "rtc_ck";
+			interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+		};
 
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
+		bsec: efuse@5c005000 {
+			compatible = "st,stm32mp15-bsec";
+			reg = <0x5c005000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			part_number_otp: part-number-otp@4 {
+				reg = <0x4 0x1>;
 			};
-
-			timer@13 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <13>;
-				status = "disabled";
+			vrefint: vrefin-cal@52 {
+				reg = <0x52 0x2>;
+			};
+			ts_cal1: calib@5c {
+				reg = <0x5c 0x2>;
+			};
+			ts_cal2: calib@5e {
+				reg = <0x5e 0x2>;
 			};
 		};
 
-		lptimer1: timer@40009000 {
+		etzpc: bus@5c007000 {
+			compatible = "st,stm32-etzpc", "simple-bus";
+			reg = <0x5c007000 0x400>;
 			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-lptimer";
-			reg = <0x40009000 0x400>;
-			interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc LPTIM1_K>;
-			clock-names = "mux";
-			wakeup-source;
-			status = "disabled";
+			#size-cells = <1>;
+			#access-controller-cells = <1>;
+			ranges;
 
-			pwm {
-				compatible = "st,stm32-pwm-lp";
-				#pwm-cells = <3>;
+			timers2: timer@40000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x40000000 0x400>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM2_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 18 0x400 0x1>,
+				       <&dmamux1 19 0x400 0x1>,
+				       <&dmamux1 20 0x400 0x1>,
+				       <&dmamux1 21 0x400 0x1>,
+				       <&dmamux1 22 0x400 0x1>;
+				dma-names = "ch1", "ch2", "ch3", "ch4", "up";
+				access-controllers = <&etzpc 16>;
 				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@1 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <1>;
+					status = "disabled";
+				};
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
 			};
 
-			trigger@0 {
-				compatible = "st,stm32-lptimer-trigger";
-				reg = <0>;
+			timers3: timer@40001000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x40001000 0x400>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM3_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 23 0x400 0x1>,
+				       <&dmamux1 24 0x400 0x1>,
+				       <&dmamux1 25 0x400 0x1>,
+				       <&dmamux1 26 0x400 0x1>,
+				       <&dmamux1 27 0x400 0x1>,
+				       <&dmamux1 28 0x400 0x1>;
+				dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
+				access-controllers = <&etzpc 17>;
 				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@2 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <2>;
+					status = "disabled";
+				};
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
 			};
 
-			counter {
-				compatible = "st,stm32-lptimer-counter";
+			timers4: timer@40002000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x40002000 0x400>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM4_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 29 0x400 0x1>,
+				       <&dmamux1 30 0x400 0x1>,
+				       <&dmamux1 31 0x400 0x1>,
+				       <&dmamux1 32 0x400 0x1>;
+				dma-names = "ch1", "ch2", "ch3", "ch4";
+				access-controllers = <&etzpc 18>;
 				status = "disabled";
-			};
-		};
 
-		spi2: spi@4000b000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32h7-spi";
-			reg = <0x4000b000 0x400>;
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc SPI2_K>;
-			resets = <&rcc SPI2_R>;
-			dmas = <&dmamux1 39 0x400 0x05>,
-			       <&dmamux1 40 0x400 0x05>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
 
-		i2s2: audio-controller@4000b000 {
-			compatible = "st,stm32h7-i2s";
-			#sound-dai-cells = <0>;
-			reg = <0x4000b000 0x400>;
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&dmamux1 39 0x400 0x01>,
-			       <&dmamux1 40 0x400 0x01>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
+				timer@3 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <3>;
+					status = "disabled";
+				};
 
-		spi3: spi@4000c000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32h7-spi";
-			reg = <0x4000c000 0x400>;
-			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc SPI3_K>;
-			resets = <&rcc SPI3_R>;
-			dmas = <&dmamux1 61 0x400 0x05>,
-			       <&dmamux1 62 0x400 0x05>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		i2s3: audio-controller@4000c000 {
-			compatible = "st,stm32h7-i2s";
-			#sound-dai-cells = <0>;
-			reg = <0x4000c000 0x400>;
-			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&dmamux1 61 0x400 0x01>,
-			       <&dmamux1 62 0x400 0x01>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+			};
 
-		spdifrx: audio-controller@4000d000 {
-			compatible = "st,stm32h7-spdifrx";
-			#sound-dai-cells = <0>;
-			reg = <0x4000d000 0x400>;
-			clocks = <&rcc SPDIF_K>;
-			clock-names = "kclk";
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&dmamux1 93 0x400 0x01>,
-			       <&dmamux1 94 0x400 0x01>;
-			dma-names = "rx", "rx-ctrl";
-			status = "disabled";
-		};
+			timers5: timer@40003000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x40003000 0x400>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM5_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 55 0x400 0x1>,
+				       <&dmamux1 56 0x400 0x1>,
+				       <&dmamux1 57 0x400 0x1>,
+				       <&dmamux1 58 0x400 0x1>,
+				       <&dmamux1 59 0x400 0x1>,
+				       <&dmamux1 60 0x400 0x1>;
+				dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
+				access-controllers = <&etzpc 19>;
+				status = "disabled";
 
-		usart2: serial@4000e000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x4000e000 0x400>;
-			interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc USART2_K>;
-			wakeup-source;
-			dmas = <&dmamux1 43 0x400 0x15>,
-			       <&dmamux1 44 0x400 0x11>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
 
-		usart3: serial@4000f000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x4000f000 0x400>;
-			interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc USART3_K>;
-			wakeup-source;
-			dmas = <&dmamux1 45 0x400 0x15>,
-			       <&dmamux1 46 0x400 0x11>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
+				timer@4 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <4>;
+					status = "disabled";
+				};
 
-		uart4: serial@40010000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x40010000 0x400>;
-			interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc UART4_K>;
-			wakeup-source;
-			dmas = <&dmamux1 63 0x400 0x15>,
-			       <&dmamux1 64 0x400 0x11>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+			};
 
-		uart5: serial@40011000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x40011000 0x400>;
-			interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc UART5_K>;
-			wakeup-source;
-			dmas = <&dmamux1 65 0x400 0x15>,
-			       <&dmamux1 66 0x400 0x11>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
+			timers6: timer@40004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x40004000 0x400>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM6_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 69 0x400 0x1>;
+				dma-names = "up";
+				access-controllers = <&etzpc 20>;
+				status = "disabled";
 
-		i2c1: i2c@40012000 {
-			compatible = "st,stm32mp15-i2c";
-			reg = <0x40012000 0x400>;
-			interrupt-names = "event", "error";
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc I2C1_K>;
-			resets = <&rcc I2C1_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			st,syscfg-fmp = <&syscfg 0x4 0x1>;
-			wakeup-source;
-			i2c-analog-filter;
-			status = "disabled";
-		};
+				timer@5 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <5>;
+					status = "disabled";
+				};
+			};
 
-		i2c2: i2c@40013000 {
-			compatible = "st,stm32mp15-i2c";
-			reg = <0x40013000 0x400>;
-			interrupt-names = "event", "error";
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc I2C2_K>;
-			resets = <&rcc I2C2_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			st,syscfg-fmp = <&syscfg 0x4 0x2>;
-			wakeup-source;
-			i2c-analog-filter;
-			status = "disabled";
-		};
+			timers7: timer@40005000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x40005000 0x400>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM7_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 70 0x400 0x1>;
+				dma-names = "up";
+				access-controllers = <&etzpc 21>;
+				status = "disabled";
 
-		i2c3: i2c@40014000 {
-			compatible = "st,stm32mp15-i2c";
-			reg = <0x40014000 0x400>;
-			interrupt-names = "event", "error";
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc I2C3_K>;
-			resets = <&rcc I2C3_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			st,syscfg-fmp = <&syscfg 0x4 0x4>;
-			wakeup-source;
-			i2c-analog-filter;
-			status = "disabled";
-		};
+				timer@6 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <6>;
+					status = "disabled";
+				};
+			};
 
-		i2c5: i2c@40015000 {
-			compatible = "st,stm32mp15-i2c";
-			reg = <0x40015000 0x400>;
-			interrupt-names = "event", "error";
-			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc I2C5_K>;
-			resets = <&rcc I2C5_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			st,syscfg-fmp = <&syscfg 0x4 0x10>;
-			wakeup-source;
-			i2c-analog-filter;
-			status = "disabled";
-		};
+			timers12: timer@40006000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x40006000 0x400>;
+				interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM12_K>;
+				clock-names = "int";
+				access-controllers = <&etzpc 22>;
+				status = "disabled";
 
-		cec: cec@40016000 {
-			compatible = "st,stm32-cec";
-			reg = <0x40016000 0x400>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc CEC_K>, <&rcc CEC>;
-			clock-names = "cec", "hdmi-cec";
-			status = "disabled";
-		};
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
 
-		dac: dac@40017000 {
-			compatible = "st,stm32h7-dac-core";
-			reg = <0x40017000 0x400>;
-			clocks = <&rcc DAC12>;
-			clock-names = "pclk";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
+				timer@11 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <11>;
+					status = "disabled";
+				};
+			};
 
-			dac1: dac@1 {
-				compatible = "st,stm32-dac";
-				#io-channel-cells = <1>;
-				reg = <1>;
+			timers13: timer@40007000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x40007000 0x400>;
+				interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM13_K>;
+				clock-names = "int";
+				access-controllers = <&etzpc 23>;
 				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@12 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <12>;
+					status = "disabled";
+				};
 			};
 
-			dac2: dac@2 {
-				compatible = "st,stm32-dac";
-				#io-channel-cells = <1>;
-				reg = <2>;
+			timers14: timer@40008000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x40008000 0x400>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM14_K>;
+				clock-names = "int";
+				access-controllers = <&etzpc 24>;
 				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@13 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <13>;
+					status = "disabled";
+				};
 			};
-		};
 
-		uart7: serial@40018000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x40018000 0x400>;
-			interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc UART7_K>;
-			wakeup-source;
-			dmas = <&dmamux1 79 0x400 0x15>,
-			       <&dmamux1 80 0x400 0x11>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
+			lptimer1: timer@40009000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-lptimer";
+				reg = <0x40009000 0x400>;
+				interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc LPTIM1_K>;
+				clock-names = "mux";
+				wakeup-source;
+				access-controllers = <&etzpc 25>;
+				status = "disabled";
 
-		uart8: serial@40019000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x40019000 0x400>;
-			interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc UART8_K>;
-			wakeup-source;
-			dmas = <&dmamux1 81 0x400 0x15>,
-			       <&dmamux1 82 0x400 0x11>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
+				pwm {
+					compatible = "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
 
-		timers1: timer@44000000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x44000000 0x400>;
-			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "brk", "up", "trg-com", "cc";
-			clocks = <&rcc TIM1_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 11 0x400 0x1>,
-			       <&dmamux1 12 0x400 0x1>,
-			       <&dmamux1 13 0x400 0x1>,
-			       <&dmamux1 14 0x400 0x1>,
-			       <&dmamux1 15 0x400 0x1>,
-			       <&dmamux1 16 0x400 0x1>,
-			       <&dmamux1 17 0x400 0x1>;
-			dma-names = "ch1", "ch2", "ch3", "ch4",
-				    "up", "trig", "com";
-			status = "disabled";
+				trigger@0 {
+					compatible = "st,stm32-lptimer-trigger";
+					reg = <0>;
+					status = "disabled";
+				};
 
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
+				counter {
+					compatible = "st,stm32-lptimer-counter";
+					status = "disabled";
+				};
 			};
 
-			timer@0 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <0>;
+			i2s2: audio-controller@4000b000 {
+				compatible = "st,stm32h7-i2s";
+				#sound-dai-cells = <0>;
+				reg = <0x4000b000 0x400>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 39 0x400 0x01>,
+				       <&dmamux1 40 0x400 0x01>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 27>;
 				status = "disabled";
 			};
 
-			counter {
-				compatible = "st,stm32-timer-counter";
+			spi2: spi@4000b000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32h7-spi";
+				reg = <0x4000b000 0x400>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc SPI2_K>;
+				resets = <&rcc SPI2_R>;
+				dmas = <&dmamux1 39 0x400 0x05>,
+				       <&dmamux1 40 0x400 0x05>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 27>;
 				status = "disabled";
 			};
-		};
-
-		timers8: timer@44001000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x44001000 0x400>;
-			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "brk", "up", "trg-com", "cc";
-			clocks = <&rcc TIM8_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 47 0x400 0x1>,
-			       <&dmamux1 48 0x400 0x1>,
-			       <&dmamux1 49 0x400 0x1>,
-			       <&dmamux1 50 0x400 0x1>,
-			       <&dmamux1 51 0x400 0x1>,
-			       <&dmamux1 52 0x400 0x1>,
-			       <&dmamux1 53 0x400 0x1>;
-			dma-names = "ch1", "ch2", "ch3", "ch4",
-				    "up", "trig", "com";
-			status = "disabled";
 
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
+			i2s3: audio-controller@4000c000 {
+				compatible = "st,stm32h7-i2s";
+				#sound-dai-cells = <0>;
+				reg = <0x4000c000 0x400>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 61 0x400 0x01>,
+				       <&dmamux1 62 0x400 0x01>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 28>;
 				status = "disabled";
 			};
 
-			timer@7 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <7>;
+			spi3: spi@4000c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32h7-spi";
+				reg = <0x4000c000 0x400>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc SPI3_K>;
+				resets = <&rcc SPI3_R>;
+				dmas = <&dmamux1 61 0x400 0x05>,
+				       <&dmamux1 62 0x400 0x05>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 28>;
 				status = "disabled";
 			};
 
-			counter {
-				compatible = "st,stm32-timer-counter";
+			spdifrx: audio-controller@4000d000 {
+				compatible = "st,stm32h7-spdifrx";
+				#sound-dai-cells = <0>;
+				reg = <0x4000d000 0x400>;
+				clocks = <&rcc SPDIF_K>;
+				clock-names = "kclk";
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 93 0x400 0x01>,
+				       <&dmamux1 94 0x400 0x01>;
+				dma-names = "rx", "rx-ctrl";
+				access-controllers = <&etzpc 29>;
 				status = "disabled";
 			};
-		};
-
-		usart6: serial@44003000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x44003000 0x400>;
-			interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc USART6_K>;
-			wakeup-source;
-			dmas = <&dmamux1 71 0x400 0x15>,
-			       <&dmamux1 72 0x400 0x11>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		spi1: spi@44004000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32h7-spi";
-			reg = <0x44004000 0x400>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc SPI1_K>;
-			resets = <&rcc SPI1_R>;
-			dmas = <&dmamux1 37 0x400 0x05>,
-			       <&dmamux1 38 0x400 0x05>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		i2s1: audio-controller@44004000 {
-			compatible = "st,stm32h7-i2s";
-			#sound-dai-cells = <0>;
-			reg = <0x44004000 0x400>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&dmamux1 37 0x400 0x01>,
-			       <&dmamux1 38 0x400 0x01>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
 
-		spi4: spi@44005000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32h7-spi";
-			reg = <0x44005000 0x400>;
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc SPI4_K>;
-			resets = <&rcc SPI4_R>;
-			dmas = <&dmamux1 83 0x400 0x05>,
-			       <&dmamux1 84 0x400 0x05>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		timers15: timer@44006000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x44006000 0x400>;
-			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global";
-			clocks = <&rcc TIM15_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 105 0x400 0x1>,
-			       <&dmamux1 106 0x400 0x1>,
-			       <&dmamux1 107 0x400 0x1>,
-			       <&dmamux1 108 0x400 0x1>;
-			dma-names = "ch1", "up", "trig", "com";
-			status = "disabled";
+			usart2: serial@4000e000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x4000e000 0x400>;
+				interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc USART2_K>;
+				wakeup-source;
+				dmas = <&dmamux1 43 0x400 0x15>,
+				       <&dmamux1 44 0x400 0x11>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 30>;
+				status = "disabled";
+			};
 
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
+			usart3: serial@4000f000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x4000f000 0x400>;
+				interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc USART3_K>;
+				wakeup-source;
+				dmas = <&dmamux1 45 0x400 0x15>,
+				       <&dmamux1 46 0x400 0x11>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 31>;
 				status = "disabled";
 			};
 
-			timer@14 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <14>;
+			uart4: serial@40010000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x40010000 0x400>;
+				interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc UART4_K>;
+				wakeup-source;
+				dmas = <&dmamux1 63 0x400 0x15>,
+				       <&dmamux1 64 0x400 0x11>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 32>;
 				status = "disabled";
 			};
-		};
 
-		timers16: timer@44007000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x44007000 0x400>;
-			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global";
-			clocks = <&rcc TIM16_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 109 0x400 0x1>,
-			       <&dmamux1 110 0x400 0x1>;
-			dma-names = "ch1", "up";
-			status = "disabled";
+			uart5: serial@40011000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x40011000 0x400>;
+				interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc UART5_K>;
+				wakeup-source;
+				dmas = <&dmamux1 65 0x400 0x15>,
+				       <&dmamux1 66 0x400 0x11>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 33>;
+				status = "disabled";
+			};
 
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
+			i2c1: i2c@40012000 {
+				compatible = "st,stm32mp15-i2c";
+				reg = <0x40012000 0x400>;
+				interrupt-names = "event", "error";
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc I2C1_K>;
+				resets = <&rcc I2C1_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				st,syscfg-fmp = <&syscfg 0x4 0x1>;
+				wakeup-source;
+				i2c-analog-filter;
+				access-controllers = <&etzpc 34>;
 				status = "disabled";
 			};
-			timer@15 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <15>;
+
+			i2c2: i2c@40013000 {
+				compatible = "st,stm32mp15-i2c";
+				reg = <0x40013000 0x400>;
+				interrupt-names = "event", "error";
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc I2C2_K>;
+				resets = <&rcc I2C2_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				st,syscfg-fmp = <&syscfg 0x4 0x2>;
+				wakeup-source;
+				i2c-analog-filter;
+				access-controllers = <&etzpc 35>;
 				status = "disabled";
 			};
-		};
 
-		timers17: timer@44008000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x44008000 0x400>;
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global";
-			clocks = <&rcc TIM17_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 111 0x400 0x1>,
-			       <&dmamux1 112 0x400 0x1>;
-			dma-names = "ch1", "up";
-			status = "disabled";
+			i2c3: i2c@40014000 {
+				compatible = "st,stm32mp15-i2c";
+				reg = <0x40014000 0x400>;
+				interrupt-names = "event", "error";
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc I2C3_K>;
+				resets = <&rcc I2C3_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				st,syscfg-fmp = <&syscfg 0x4 0x4>;
+				wakeup-source;
+				i2c-analog-filter;
+				access-controllers = <&etzpc 36>;
+				status = "disabled";
+			};
 
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
+			i2c5: i2c@40015000 {
+				compatible = "st,stm32mp15-i2c";
+				reg = <0x40015000 0x400>;
+				interrupt-names = "event", "error";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc I2C5_K>;
+				resets = <&rcc I2C5_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				st,syscfg-fmp = <&syscfg 0x4 0x10>;
+				wakeup-source;
+				i2c-analog-filter;
+				access-controllers = <&etzpc 37>;
 				status = "disabled";
 			};
 
-			timer@16 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <16>;
+			cec: cec@40016000 {
+				compatible = "st,stm32-cec";
+				reg = <0x40016000 0x400>;
+				interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CEC_K>, <&rcc CEC>;
+				clock-names = "cec", "hdmi-cec";
+				access-controllers = <&etzpc 38>;
 				status = "disabled";
 			};
-		};
 
-		spi5: spi@44009000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32h7-spi";
-			reg = <0x44009000 0x400>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc SPI5_K>;
-			resets = <&rcc SPI5_R>;
-			dmas = <&dmamux1 85 0x400 0x05>,
-			       <&dmamux1 86 0x400 0x05>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
+			dac: dac@40017000 {
+				compatible = "st,stm32h7-dac-core";
+				reg = <0x40017000 0x400>;
+				clocks = <&rcc DAC12>;
+				clock-names = "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&etzpc 39>;
+				status = "disabled";
 
-		sai1: sai@4400a000 {
-			compatible = "st,stm32h7-sai";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x4400a000 0x400>;
-			reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&rcc SAI1_R>;
-			status = "disabled";
+				dac1: dac@1 {
+					compatible = "st,stm32-dac";
+					#io-channel-cells = <1>;
+					reg = <1>;
+					status = "disabled";
+				};
 
-			sai1a: audio-controller@4400a004 {
-				#sound-dai-cells = <0>;
+				dac2: dac@2 {
+					compatible = "st,stm32-dac";
+					#io-channel-cells = <1>;
+					reg = <2>;
+					status = "disabled";
+				};
+			};
 
-				compatible = "st,stm32-sai-sub-a";
-				reg = <0x4 0x20>;
-				clocks = <&rcc SAI1_K>;
-				clock-names = "sai_ck";
-				dmas = <&dmamux1 87 0x400 0x01>;
+			uart7: serial@40018000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x40018000 0x400>;
+				interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc UART7_K>;
+				wakeup-source;
+				dmas = <&dmamux1 79 0x400 0x15>,
+				       <&dmamux1 80 0x400 0x11>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 40>;
 				status = "disabled";
 			};
 
-			sai1b: audio-controller@4400a024 {
-				#sound-dai-cells = <0>;
-				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x20>;
-				clocks = <&rcc SAI1_K>;
-				clock-names = "sai_ck";
-				dmas = <&dmamux1 88 0x400 0x01>;
+			uart8: serial@40019000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x40019000 0x400>;
+				interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc UART8_K>;
+				wakeup-source;
+				dmas = <&dmamux1 81 0x400 0x15>,
+				       <&dmamux1 82 0x400 0x11>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 41>;
 				status = "disabled";
 			};
-		};
 
-		sai2: sai@4400b000 {
-			compatible = "st,stm32h7-sai";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x4400b000 0x400>;
-			reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&rcc SAI2_R>;
-			status = "disabled";
-
-			sai2a: audio-controller@4400b004 {
-				#sound-dai-cells = <0>;
-				compatible = "st,stm32-sai-sub-a";
-				reg = <0x4 0x20>;
-				clocks = <&rcc SAI2_K>;
-				clock-names = "sai_ck";
-				dmas = <&dmamux1 89 0x400 0x01>;
+			timers1: timer@44000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x44000000 0x400>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "brk", "up", "trg-com", "cc";
+				clocks = <&rcc TIM1_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 11 0x400 0x1>,
+				       <&dmamux1 12 0x400 0x1>,
+				       <&dmamux1 13 0x400 0x1>,
+				       <&dmamux1 14 0x400 0x1>,
+				       <&dmamux1 15 0x400 0x1>,
+				       <&dmamux1 16 0x400 0x1>,
+				       <&dmamux1 17 0x400 0x1>;
+				dma-names = "ch1", "ch2", "ch3", "ch4",
+					    "up", "trig", "com";
+				access-controllers = <&etzpc 48>;
 				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@0 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <0>;
+					status = "disabled";
+				};
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
 			};
 
-			sai2b: audio-controller@4400b024 {
-				#sound-dai-cells = <0>;
-				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x20>;
-				clocks = <&rcc SAI2_K>;
-				clock-names = "sai_ck";
-				dmas = <&dmamux1 90 0x400 0x01>;
+			timers8: timer@44001000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x44001000 0x400>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "brk", "up", "trg-com", "cc";
+				clocks = <&rcc TIM8_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 47 0x400 0x1>,
+				       <&dmamux1 48 0x400 0x1>,
+				       <&dmamux1 49 0x400 0x1>,
+				       <&dmamux1 50 0x400 0x1>,
+				       <&dmamux1 51 0x400 0x1>,
+				       <&dmamux1 52 0x400 0x1>,
+				       <&dmamux1 53 0x400 0x1>;
+				dma-names = "ch1", "ch2", "ch3", "ch4",
+					    "up", "trig", "com";
+				access-controllers = <&etzpc 49>;
 				status = "disabled";
-			};
-		};
 
-		sai3: sai@4400c000 {
-			compatible = "st,stm32h7-sai";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x4400c000 0x400>;
-			reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>;
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&rcc SAI3_R>;
-			status = "disabled";
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
 
-			sai3a: audio-controller@4400c004 {
-				#sound-dai-cells = <0>;
-				compatible = "st,stm32-sai-sub-a";
-				reg = <0x04 0x20>;
-				clocks = <&rcc SAI3_K>;
-				clock-names = "sai_ck";
-				dmas = <&dmamux1 113 0x400 0x01>;
+				timer@7 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <7>;
+					status = "disabled";
+				};
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+			};
+
+			usart6: serial@44003000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x44003000 0x400>;
+				interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc USART6_K>;
+				wakeup-source;
+				dmas = <&dmamux1 71 0x400 0x15>,
+				<&dmamux1 72 0x400 0x11>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 51>;
 				status = "disabled";
 			};
 
-			sai3b: audio-controller@4400c024 {
+			i2s1: audio-controller@44004000 {
+				compatible = "st,stm32h7-i2s";
 				#sound-dai-cells = <0>;
-				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x20>;
-				clocks = <&rcc SAI3_K>;
-				clock-names = "sai_ck";
-				dmas = <&dmamux1 114 0x400 0x01>;
+				reg = <0x44004000 0x400>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 37 0x400 0x01>,
+				<&dmamux1 38 0x400 0x01>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 52>;
 				status = "disabled";
 			};
-		};
-
-		dfsdm: dfsdm@4400d000 {
-			compatible = "st,stm32mp1-dfsdm";
-			reg = <0x4400d000 0x800>;
-			clocks = <&rcc DFSDM_K>;
-			clock-names = "dfsdm";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
 
-			dfsdm0: filter@0 {
-				compatible = "st,stm32-dfsdm-adc";
-				#io-channel-cells = <1>;
-				reg = <0>;
-				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dmamux1 101 0x400 0x01>;
-				dma-names = "rx";
+			spi1: spi@44004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32h7-spi";
+				reg = <0x44004000 0x400>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc SPI1_K>;
+				resets = <&rcc SPI1_R>;
+				dmas = <&dmamux1 37 0x400 0x05>,
+				<&dmamux1 38 0x400 0x05>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 52>;
 				status = "disabled";
 			};
 
-			dfsdm1: filter@1 {
-				compatible = "st,stm32-dfsdm-adc";
-				#io-channel-cells = <1>;
-				reg = <1>;
-				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dmamux1 102 0x400 0x01>;
-				dma-names = "rx";
+			spi4: spi@44005000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32h7-spi";
+				reg = <0x44005000 0x400>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc SPI4_K>;
+				resets = <&rcc SPI4_R>;
+				dmas = <&dmamux1 83 0x400 0x05>,
+				<&dmamux1 84 0x400 0x05>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 53>;
 				status = "disabled";
 			};
 
-			dfsdm2: filter@2 {
-				compatible = "st,stm32-dfsdm-adc";
-				#io-channel-cells = <1>;
-				reg = <2>;
-				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dmamux1 103 0x400 0x01>;
-				dma-names = "rx";
+			timers15: timer@44006000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x44006000 0x400>;
+				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM15_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 105 0x400 0x1>,
+				       <&dmamux1 106 0x400 0x1>,
+				       <&dmamux1 107 0x400 0x1>,
+				       <&dmamux1 108 0x400 0x1>;
+				dma-names = "ch1", "up", "trig", "com";
+				access-controllers = <&etzpc 54>;
 				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@14 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <14>;
+					status = "disabled";
+				};
 			};
 
-			dfsdm3: filter@3 {
-				compatible = "st,stm32-dfsdm-adc";
-				#io-channel-cells = <1>;
-				reg = <3>;
-				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dmamux1 104 0x400 0x01>;
-				dma-names = "rx";
+			timers16: timer@44007000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x44007000 0x400>;
+				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM16_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 109 0x400 0x1>,
+				<&dmamux1 110 0x400 0x1>;
+				dma-names = "ch1", "up";
+				access-controllers = <&etzpc 55>;
 				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+				timer@15 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <15>;
+					status = "disabled";
+				};
 			};
 
-			dfsdm4: filter@4 {
-				compatible = "st,stm32-dfsdm-adc";
-				#io-channel-cells = <1>;
-				reg = <4>;
-				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dmamux1 91 0x400 0x01>;
-				dma-names = "rx";
+			timers17: timer@44008000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x44008000 0x400>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM17_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 111 0x400 0x1>,
+				<&dmamux1 112 0x400 0x1>;
+				dma-names = "ch1", "up";
+				access-controllers = <&etzpc 56>;
 				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@16 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <16>;
+					status = "disabled";
+				};
 			};
 
-			dfsdm5: filter@5 {
-				compatible = "st,stm32-dfsdm-adc";
-				#io-channel-cells = <1>;
-				reg = <5>;
-				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dmamux1 92 0x400 0x01>;
-				dma-names = "rx";
+			spi5: spi@44009000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32h7-spi";
+				reg = <0x44009000 0x400>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc SPI5_K>;
+				resets = <&rcc SPI5_R>;
+				dmas = <&dmamux1 85 0x400 0x05>,
+				<&dmamux1 86 0x400 0x05>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 57>;
 				status = "disabled";
 			};
-		};
 
-		dma1: dma-controller@48000000 {
-			compatible = "st,stm32-dma";
-			reg = <0x48000000 0x400>;
-			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc DMA1>;
-			resets = <&rcc DMA1_R>;
-			#dma-cells = <4>;
-			st,mem2mem;
-			dma-requests = <8>;
-		};
+			sai1: sai@4400a000 {
+				compatible = "st,stm32h7-sai";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x4400a000 0x400>;
+				reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc SAI1_R>;
+				access-controllers = <&etzpc 58>;
+				status = "disabled";
 
-		dma2: dma-controller@48001000 {
-			compatible = "st,stm32-dma";
-			reg = <0x48001000 0x400>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc DMA2>;
-			resets = <&rcc DMA2_R>;
-			#dma-cells = <4>;
-			st,mem2mem;
-			dma-requests = <8>;
-		};
+				sai1a: audio-controller@4400a004 {
+					#sound-dai-cells = <0>;
 
-		dmamux1: dma-router@48002000 {
-			compatible = "st,stm32h7-dmamux";
-			reg = <0x48002000 0x40>;
-			#dma-cells = <3>;
-			dma-requests = <128>;
-			dma-masters = <&dma1 &dma2>;
-			dma-channels = <16>;
-			clocks = <&rcc DMAMUX>;
-			resets = <&rcc DMAMUX_R>;
-		};
+					compatible = "st,stm32-sai-sub-a";
+					reg = <0x4 0x20>;
+					clocks = <&rcc SAI1_K>;
+					clock-names = "sai_ck";
+					dmas = <&dmamux1 87 0x400 0x01>;
+					status = "disabled";
+				};
 
-		adc: adc@48003000 {
-			compatible = "st,stm32mp1-adc-core";
-			reg = <0x48003000 0x400>;
-			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc ADC12>, <&rcc ADC12_K>;
-			clock-names = "bus", "adc";
-			interrupt-controller;
-			st,syscfg = <&syscfg>;
-			#interrupt-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
+				sai1b: audio-controller@4400a024 {
+					#sound-dai-cells = <0>;
+					compatible = "st,stm32-sai-sub-b";
+					reg = <0x24 0x20>;
+					clocks = <&rcc SAI1_K>;
+					clock-names = "sai_ck";
+					dmas = <&dmamux1 88 0x400 0x01>;
+					status = "disabled";
+				};
+			};
 
-			adc1: adc@0 {
-				compatible = "st,stm32mp1-adc";
-				#io-channel-cells = <1>;
+			sai2: sai@4400b000 {
+				compatible = "st,stm32h7-sai";
 				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x0>;
-				interrupt-parent = <&adc>;
-				interrupts = <0>;
-				dmas = <&dmamux1 9 0x400 0x01>;
-				dma-names = "rx";
+				#size-cells = <1>;
+				ranges = <0 0x4400b000 0x400>;
+				reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc SAI2_R>;
+				access-controllers = <&etzpc 59>;
 				status = "disabled";
+
+				sai2a: audio-controller@4400b004 {
+					#sound-dai-cells = <0>;
+					compatible = "st,stm32-sai-sub-a";
+					reg = <0x4 0x20>;
+					clocks = <&rcc SAI2_K>;
+					clock-names = "sai_ck";
+					dmas = <&dmamux1 89 0x400 0x01>;
+					status = "disabled";
+				};
+
+				sai2b: audio-controller@4400b024 {
+					#sound-dai-cells = <0>;
+					compatible = "st,stm32-sai-sub-b";
+					reg = <0x24 0x20>;
+					clocks = <&rcc SAI2_K>;
+					clock-names = "sai_ck";
+					dmas = <&dmamux1 90 0x400 0x01>;
+					status = "disabled";
+				};
 			};
 
-			adc2: adc@100 {
-				compatible = "st,stm32mp1-adc";
-				#io-channel-cells = <1>;
+			sai3: sai@4400c000 {
+				compatible = "st,stm32h7-sai";
 				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x100>;
-				interrupt-parent = <&adc>;
-				interrupts = <1>;
-				dmas = <&dmamux1 10 0x400 0x01>;
-				dma-names = "rx";
-				nvmem-cells = <&vrefint>;
-				nvmem-cell-names = "vrefint";
+				#size-cells = <1>;
+				ranges = <0 0x4400c000 0x400>;
+				reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>;
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc SAI3_R>;
+				access-controllers = <&etzpc 60>;
 				status = "disabled";
-				channel@13 {
-					reg = <13>;
-					label = "vrefint";
+
+				sai3a: audio-controller@4400c004 {
+					#sound-dai-cells = <0>;
+					compatible = "st,stm32-sai-sub-a";
+					reg = <0x04 0x20>;
+					clocks = <&rcc SAI3_K>;
+					clock-names = "sai_ck";
+					dmas = <&dmamux1 113 0x400 0x01>;
+					status = "disabled";
 				};
-				channel@14 {
-					reg = <14>;
-					label = "vddcore";
+
+				sai3b: audio-controller@4400c024 {
+					#sound-dai-cells = <0>;
+					compatible = "st,stm32-sai-sub-b";
+					reg = <0x24 0x20>;
+					clocks = <&rcc SAI3_K>;
+					clock-names = "sai_ck";
+					dmas = <&dmamux1 114 0x400 0x01>;
+					status = "disabled";
 				};
 			};
-		};
 
-		sdmmc3: mmc@48004000 {
-			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x00253180>;
-			reg = <0x48004000 0x400>;
-			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc SDMMC3_K>;
-			clock-names = "apb_pclk";
-			resets = <&rcc SDMMC3_R>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			max-frequency = <120000000>;
-			status = "disabled";
-		};
+			dfsdm: dfsdm@4400d000 {
+				compatible = "st,stm32mp1-dfsdm";
+				reg = <0x4400d000 0x800>;
+				clocks = <&rcc DFSDM_K>;
+				clock-names = "dfsdm";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&etzpc 61>;
+				status = "disabled";
 
-		usbotg_hs: usb-otg@49000000 {
-			compatible = "st,stm32mp15-hsotg", "snps,dwc2";
-			reg = <0x49000000 0x10000>;
-			clocks = <&rcc USBO_K>, <&usbphyc>;
-			clock-names = "otg", "utmi";
-			resets = <&rcc USBO_R>;
-			reset-names = "dwc2";
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			g-rx-fifo-size = <512>;
-			g-np-tx-fifo-size = <32>;
-			g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
-			dr_mode = "otg";
-			otg-rev = <0x200>;
-			usb33d-supply = <&usb33>;
-			status = "disabled";
-		};
+				dfsdm0: filter@0 {
+					compatible = "st,stm32-dfsdm-adc";
+					#io-channel-cells = <1>;
+					reg = <0>;
+					interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&dmamux1 101 0x400 0x01>;
+					dma-names = "rx";
+					status = "disabled";
+				};
 
-		ipcc: mailbox@4c001000 {
-			compatible = "st,stm32mp1-ipcc";
-			#mbox-cells = <1>;
-			reg = <0x4c001000 0x400>;
-			st,proc-id = <0>;
-			interrupts-extended =
-				<&exti 61 1>,
-				<&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "rx", "tx";
-			clocks = <&rcc IPCC>;
-			wakeup-source;
-			status = "disabled";
-		};
+				dfsdm1: filter@1 {
+					compatible = "st,stm32-dfsdm-adc";
+					#io-channel-cells = <1>;
+					reg = <1>;
+					interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&dmamux1 102 0x400 0x01>;
+					dma-names = "rx";
+					status = "disabled";
+				};
 
-		dcmi: dcmi@4c006000 {
-			compatible = "st,stm32-dcmi";
-			reg = <0x4c006000 0x400>;
-			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&rcc CAMITF_R>;
-			clocks = <&rcc DCMI>;
-			clock-names = "mclk";
-			dmas = <&dmamux1 75 0x400 0x01>;
-			dma-names = "tx";
-			status = "disabled";
-		};
+				dfsdm2: filter@2 {
+					compatible = "st,stm32-dfsdm-adc";
+					#io-channel-cells = <1>;
+					reg = <2>;
+					interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&dmamux1 103 0x400 0x01>;
+					dma-names = "rx";
+					status = "disabled";
+				};
 
-		rcc: rcc@50000000 {
-			compatible = "st,stm32mp1-rcc", "syscon";
-			reg = <0x50000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
+				dfsdm3: filter@3 {
+					compatible = "st,stm32-dfsdm-adc";
+					#io-channel-cells = <1>;
+					reg = <3>;
+					interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&dmamux1 104 0x400 0x01>;
+					dma-names = "rx";
+					status = "disabled";
+				};
 
-		pwr_regulators: pwr@50001000 {
-			compatible = "st,stm32mp1,pwr-reg";
-			reg = <0x50001000 0x10>;
+				dfsdm4: filter@4 {
+					compatible = "st,stm32-dfsdm-adc";
+					#io-channel-cells = <1>;
+					reg = <4>;
+					interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&dmamux1 91 0x400 0x01>;
+					dma-names = "rx";
+					status = "disabled";
+				};
 
-			reg11: reg11 {
-				regulator-name = "reg11";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
+				dfsdm5: filter@5 {
+					compatible = "st,stm32-dfsdm-adc";
+					#io-channel-cells = <1>;
+					reg = <5>;
+					interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&dmamux1 92 0x400 0x01>;
+					dma-names = "rx";
+					status = "disabled";
+				};
 			};
 
-			reg18: reg18 {
-				regulator-name = "reg18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
+			dma1: dma-controller@48000000 {
+				compatible = "st,stm32-dma";
+				reg = <0x48000000 0x400>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc DMA1>;
+				resets = <&rcc DMA1_R>;
+				#dma-cells = <4>;
+				st,mem2mem;
+				dma-requests = <8>;
+				access-controllers = <&etzpc 88>;
 			};
 
-			usb33: usb33 {
-				regulator-name = "usb33";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
+			dma2: dma-controller@48001000 {
+				compatible = "st,stm32-dma";
+				reg = <0x48001000 0x400>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc DMA2>;
+				resets = <&rcc DMA2_R>;
+				#dma-cells = <4>;
+				st,mem2mem;
+				dma-requests = <8>;
+				access-controllers = <&etzpc 89>;
 			};
-		};
 
-		pwr_mcu: pwr_mcu@50001014 {
-			compatible = "st,stm32mp151-pwr-mcu", "syscon";
-			reg = <0x50001014 0x4>;
-		};
+			dmamux1: dma-router@48002000 {
+				compatible = "st,stm32h7-dmamux";
+				reg = <0x48002000 0x40>;
+				#dma-cells = <3>;
+				dma-requests = <128>;
+				dma-masters = <&dma1 &dma2>;
+				dma-channels = <16>;
+				clocks = <&rcc DMAMUX>;
+				resets = <&rcc DMAMUX_R>;
+				access-controllers = <&etzpc 90>;
+			};
 
-		exti: interrupt-controller@5000d000 {
-			compatible = "st,stm32mp1-exti", "syscon";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x5000d000 0x400>;
-		};
+			adc: adc@48003000 {
+				compatible = "st,stm32mp1-adc-core";
+				reg = <0x48003000 0x400>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc ADC12>, <&rcc ADC12_K>;
+				clock-names = "bus", "adc";
+				interrupt-controller;
+				st,syscfg = <&syscfg>;
+				#interrupt-cells = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&etzpc 72>;
+				status = "disabled";
 
-		syscfg: syscon@50020000 {
-			compatible = "st,stm32mp157-syscfg", "syscon";
-			reg = <0x50020000 0x400>;
-			clocks = <&rcc SYSCFG>;
-		};
+				adc1: adc@0 {
+					compatible = "st,stm32mp1-adc";
+					#io-channel-cells = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+					interrupt-parent = <&adc>;
+					interrupts = <0>;
+					dmas = <&dmamux1 9 0x400 0x01>;
+					dma-names = "rx";
+					status = "disabled";
+				};
 
-		lptimer2: timer@50021000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-lptimer";
-			reg = <0x50021000 0x400>;
-			interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc LPTIM2_K>;
-			clock-names = "mux";
-			wakeup-source;
-			status = "disabled";
+				adc2: adc@100 {
+					compatible = "st,stm32mp1-adc";
+					#io-channel-cells = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x100>;
+					interrupt-parent = <&adc>;
+					interrupts = <1>;
+					dmas = <&dmamux1 10 0x400 0x01>;
+					dma-names = "rx";
+					nvmem-cells = <&vrefint>;
+					nvmem-cell-names = "vrefint";
+					status = "disabled";
+					channel@13 {
+						reg = <13>;
+						label = "vrefint";
+					};
+					channel@14 {
+						reg = <14>;
+						label = "vddcore";
+					};
+				};
+			};
 
-			pwm {
-				compatible = "st,stm32-pwm-lp";
-				#pwm-cells = <3>;
+			sdmmc3: mmc@48004000 {
+				compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00253180>;
+				reg = <0x48004000 0x400>;
+				interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc SDMMC3_K>;
+				clock-names = "apb_pclk";
+				resets = <&rcc SDMMC3_R>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <120000000>;
+				access-controllers = <&etzpc 86>;
 				status = "disabled";
 			};
 
-			trigger@1 {
-				compatible = "st,stm32-lptimer-trigger";
-				reg = <1>;
+			usbotg_hs: usb-otg@49000000 {
+				compatible = "st,stm32mp15-hsotg", "snps,dwc2";
+				reg = <0x49000000 0x10000>;
+				clocks = <&rcc USBO_K>, <&usbphyc>;
+				clock-names = "otg", "utmi";
+				resets = <&rcc USBO_R>;
+				reset-names = "dwc2";
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				g-rx-fifo-size = <512>;
+				g-np-tx-fifo-size = <32>;
+				g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
+				dr_mode = "otg";
+				otg-rev = <0x200>;
+				usb33d-supply = <&usb33>;
+				access-controllers = <&etzpc 85>;
 				status = "disabled";
 			};
 
-			counter {
-				compatible = "st,stm32-lptimer-counter";
+			dcmi: dcmi@4c006000 {
+				compatible = "st,stm32-dcmi";
+				reg = <0x4c006000 0x400>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc CAMITF_R>;
+				clocks = <&rcc DCMI>;
+				clock-names = "mclk";
+				dmas = <&dmamux1 75 0x400 0x01>;
+				dma-names = "tx";
+				access-controllers = <&etzpc 70>;
 				status = "disabled";
 			};
-		};
 
-		lptimer3: timer@50022000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-lptimer";
-			reg = <0x50022000 0x400>;
-			interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc LPTIM3_K>;
-			clock-names = "mux";
-			wakeup-source;
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm-lp";
-				#pwm-cells = <3>;
+			lptimer2: timer@50021000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-lptimer";
+				reg = <0x50021000 0x400>;
+				interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc LPTIM2_K>;
+				clock-names = "mux";
+				wakeup-source;
+				access-controllers = <&etzpc 64>;
 				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				trigger@1 {
+					compatible = "st,stm32-lptimer-trigger";
+					reg = <1>;
+					status = "disabled";
+				};
+
+				counter {
+					compatible = "st,stm32-lptimer-counter";
+					status = "disabled";
+				};
 			};
 
-			trigger@2 {
-				compatible = "st,stm32-lptimer-trigger";
-				reg = <2>;
+			lptimer3: timer@50022000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-lptimer";
+				reg = <0x50022000 0x400>;
+				interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc LPTIM3_K>;
+				clock-names = "mux";
+				wakeup-source;
+				access-controllers = <&etzpc 65>;
 				status = "disabled";
-			};
-		};
 
-		lptimer4: timer@50023000 {
-			compatible = "st,stm32-lptimer";
-			reg = <0x50023000 0x400>;
-			interrupts-extended = <&exti 52 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc LPTIM4_K>;
-			clock-names = "mux";
-			wakeup-source;
-			status = "disabled";
+				pwm {
+					compatible = "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
 
-			pwm {
-				compatible = "st,stm32-pwm-lp";
-				#pwm-cells = <3>;
-				status = "disabled";
+				trigger@2 {
+					compatible = "st,stm32-lptimer-trigger";
+					reg = <2>;
+					status = "disabled";
+				};
 			};
-		};
-
-		lptimer5: timer@50024000 {
-			compatible = "st,stm32-lptimer";
-			reg = <0x50024000 0x400>;
-			interrupts-extended = <&exti 53 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc LPTIM5_K>;
-			clock-names = "mux";
-			wakeup-source;
-			status = "disabled";
 
-			pwm {
-				compatible = "st,stm32-pwm-lp";
-				#pwm-cells = <3>;
+			lptimer4: timer@50023000 {
+				compatible = "st,stm32-lptimer";
+				reg = <0x50023000 0x400>;
+				interrupts-extended = <&exti 52 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc LPTIM4_K>;
+				clock-names = "mux";
+				wakeup-source;
+				access-controllers = <&etzpc 66>;
 				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
 			};
-		};
 
-		vrefbuf: vrefbuf@50025000 {
-			compatible = "st,stm32-vrefbuf";
-			reg = <0x50025000 0x8>;
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <2500000>;
-			clocks = <&rcc VREF>;
-			status = "disabled";
-		};
+			lptimer5: timer@50024000 {
+				compatible = "st,stm32-lptimer";
+				reg = <0x50024000 0x400>;
+				interrupts-extended = <&exti 53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc LPTIM5_K>;
+				clock-names = "mux";
+				wakeup-source;
+				access-controllers = <&etzpc 67>;
+				status = "disabled";
 
-		sai4: sai@50027000 {
-			compatible = "st,stm32h7-sai";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x50027000 0x400>;
-			reg = <0x50027000 0x4>, <0x500273f0 0x10>;
-			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&rcc SAI4_R>;
-			status = "disabled";
+				pwm {
+					compatible = "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+			};
 
-			sai4a: audio-controller@50027004 {
-				#sound-dai-cells = <0>;
-				compatible = "st,stm32-sai-sub-a";
-				reg = <0x04 0x20>;
-				clocks = <&rcc SAI4_K>;
-				clock-names = "sai_ck";
-				dmas = <&dmamux1 99 0x400 0x01>;
+			vrefbuf: vrefbuf@50025000 {
+				compatible = "st,stm32-vrefbuf";
+				reg = <0x50025000 0x8>;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2500000>;
+				clocks = <&rcc VREF>;
+				access-controllers = <&etzpc 69>;
 				status = "disabled";
 			};
 
-			sai4b: audio-controller@50027024 {
-				#sound-dai-cells = <0>;
-				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x20>;
-				clocks = <&rcc SAI4_K>;
-				clock-names = "sai_ck";
-				dmas = <&dmamux1 100 0x400 0x01>;
+			sai4: sai@50027000 {
+				compatible = "st,stm32h7-sai";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x50027000 0x400>;
+				reg = <0x50027000 0x4>, <0x500273f0 0x10>;
+				interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc SAI4_R>;
+				access-controllers = <&etzpc 68>;
 				status = "disabled";
-			};
-		};
 
-		dts: thermal@50028000 {
-			compatible = "st,stm32-thermal";
-			reg = <0x50028000 0x100>;
-			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc TMPSENS>;
-			clock-names = "pclk";
-			#thermal-sensor-cells = <0>;
-			status = "disabled";
-		};
+				sai4a: audio-controller@50027004 {
+					#sound-dai-cells = <0>;
+					compatible = "st,stm32-sai-sub-a";
+					reg = <0x04 0x20>;
+					clocks = <&rcc SAI4_K>;
+					clock-names = "sai_ck";
+					dmas = <&dmamux1 99 0x400 0x01>;
+					status = "disabled";
+				};
 
-		hash1: hash@54002000 {
-			compatible = "st,stm32f756-hash";
-			reg = <0x54002000 0x400>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc HASH1>;
-			resets = <&rcc HASH1_R>;
-			dmas = <&mdma1 31 0x2 0x1000A02 0x0 0x0>;
-			dma-names = "in";
-			dma-maxburst = <2>;
-			status = "disabled";
-		};
+				sai4b: audio-controller@50027024 {
+					#sound-dai-cells = <0>;
+					compatible = "st,stm32-sai-sub-b";
+					reg = <0x24 0x20>;
+					clocks = <&rcc SAI4_K>;
+					clock-names = "sai_ck";
+					dmas = <&dmamux1 100 0x400 0x01>;
+					status = "disabled";
+				};
+			};
 
-		rng1: rng@54003000 {
-			compatible = "st,stm32-rng";
-			reg = <0x54003000 0x400>;
-			clocks = <&rcc RNG1_K>;
-			resets = <&rcc RNG1_R>;
-			status = "disabled";
-		};
+			hash1: hash@54002000 {
+				compatible = "st,stm32f756-hash";
+				reg = <0x54002000 0x400>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc HASH1>;
+				resets = <&rcc HASH1_R>;
+				dmas = <&mdma1 31 0x2 0x1000A02 0x0 0x0>;
+				dma-names = "in";
+				dma-maxburst = <2>;
+				access-controllers = <&etzpc 8>;
+				status = "disabled";
+			};
 
-		mdma1: dma-controller@58000000 {
-			compatible = "st,stm32h7-mdma";
-			reg = <0x58000000 0x1000>;
-			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc MDMA>;
-			resets = <&rcc MDMA_R>;
-			#dma-cells = <5>;
-			dma-channels = <32>;
-			dma-requests = <48>;
-		};
+			rng1: rng@54003000 {
+				compatible = "st,stm32-rng";
+				reg = <0x54003000 0x400>;
+				clocks = <&rcc RNG1_K>;
+				resets = <&rcc RNG1_R>;
+				access-controllers = <&etzpc 7>;
+				status = "disabled";
+			};
 
-		fmc: memory-controller@58002000 {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			compatible = "st,stm32mp1-fmc2-ebi";
-			reg = <0x58002000 0x1000>;
-			clocks = <&rcc FMC_K>;
-			resets = <&rcc FMC_R>;
-			status = "disabled";
+			fmc: memory-controller@58002000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				compatible = "st,stm32mp1-fmc2-ebi";
+				reg = <0x58002000 0x1000>;
+				clocks = <&rcc FMC_K>;
+				resets = <&rcc FMC_R>;
+				access-controllers = <&etzpc 91>;
+				status = "disabled";
 
-			ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
-				 <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
-				 <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
-				 <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
-				 <4 0 0x80000000 0x10000000>; /* NAND */
+				ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+					 <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+					 <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+					 <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+					 <4 0 0x80000000 0x10000000>; /* NAND */
 
-			nand-controller@4,0 {
+				nand-controller@4,0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "st,stm32mp1-fmc2-nfc";
+					reg = <4 0x00000000 0x1000>,
+					      <4 0x08010000 0x1000>,
+					      <4 0x08020000 0x1000>,
+					      <4 0x01000000 0x1000>,
+					      <4 0x09010000 0x1000>,
+					      <4 0x09020000 0x1000>;
+					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
+					       <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
+					       <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
+					dma-names = "tx", "rx", "ecc";
+					status = "disabled";
+				};
+			};
+
+			qspi: spi@58003000 {
+				compatible = "st,stm32f469-qspi";
+				reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+				reg-names = "qspi", "qspi_mm";
+				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&mdma1 22 0x2 0x10100002 0x0 0x0>,
+				       <&mdma1 22 0x2 0x10100008 0x0 0x0>;
+				dma-names = "tx", "rx";
+				clocks = <&rcc QSPI_K>;
+				resets = <&rcc QSPI_R>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "st,stm32mp1-fmc2-nfc";
-				reg = <4 0x00000000 0x1000>,
-				      <4 0x08010000 0x1000>,
-				      <4 0x08020000 0x1000>,
-				      <4 0x01000000 0x1000>,
-				      <4 0x09010000 0x1000>,
-				      <4 0x09020000 0x1000>;
-				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
-				       <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
-				       <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
-				dma-names = "tx", "rx", "ecc";
+				access-controllers = <&etzpc 92>;
 				status = "disabled";
 			};
-		};
-
-		qspi: spi@58003000 {
-			compatible = "st,stm32f469-qspi";
-			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
-			reg-names = "qspi", "qspi_mm";
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&mdma1 22 0x2 0x10100002 0x0 0x0>,
-			       <&mdma1 22 0x2 0x10100008 0x0 0x0>;
-			dma-names = "tx", "rx";
-			clocks = <&rcc QSPI_K>;
-			resets = <&rcc QSPI_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		sdmmc1: mmc@58005000 {
-			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x00253180>;
-			reg = <0x58005000 0x1000>;
-			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc SDMMC1_K>;
-			clock-names = "apb_pclk";
-			resets = <&rcc SDMMC1_R>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			max-frequency = <120000000>;
-			status = "disabled";
-		};
-
-		sdmmc2: mmc@58007000 {
-			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x00253180>;
-			reg = <0x58007000 0x1000>;
-			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc SDMMC2_K>;
-			clock-names = "apb_pclk";
-			resets = <&rcc SDMMC2_R>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			max-frequency = <120000000>;
-			status = "disabled";
-		};
-
-		crc1: crc@58009000 {
-			compatible = "st,stm32f7-crc";
-			reg = <0x58009000 0x400>;
-			clocks = <&rcc CRC1>;
-			status = "disabled";
-		};
 
-		ethernet0: ethernet@5800a000 {
-			compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
-			reg = <0x5800a000 0x2000>;
-			reg-names = "stmmaceth";
-			interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-			clock-names = "stmmaceth",
-				      "mac-clk-tx",
-				      "mac-clk-rx",
-				      "eth-ck",
-				      "ptp_ref",
-				      "ethstp";
-			clocks = <&rcc ETHMAC>,
-				 <&rcc ETHTX>,
-				 <&rcc ETHRX>,
-				 <&rcc ETHCK_K>,
-				 <&rcc ETHPTP_K>,
-				 <&rcc ETHSTP>;
-			st,syscon = <&syscfg 0x4>;
-			snps,mixed-burst;
-			snps,pbl = <2>;
-			snps,en-tx-lpi-clockgating;
-			snps,axi-config = <&stmmac_axi_config_0>;
-			snps,tso;
-			status = "disabled";
+			ethernet0: ethernet@5800a000 {
+				compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
+				reg = <0x5800a000 0x2000>;
+				reg-names = "stmmaceth";
+				interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq";
+				clock-names = "stmmaceth",
+					      "mac-clk-tx",
+					      "mac-clk-rx",
+					      "eth-ck",
+					      "ptp_ref",
+					      "ethstp";
+				clocks = <&rcc ETHMAC>,
+					 <&rcc ETHTX>,
+					 <&rcc ETHRX>,
+					 <&rcc ETHCK_K>,
+					 <&rcc ETHPTP_K>,
+					 <&rcc ETHSTP>;
+				st,syscon = <&syscfg 0x4>;
+				snps,mixed-burst;
+				snps,pbl = <2>;
+				snps,en-tx-lpi-clockgating;
+				snps,axi-config = <&stmmac_axi_config_0>;
+				snps,tso;
+				access-controllers = <&etzpc 94>;
+				status = "disabled";
 
-			stmmac_axi_config_0: stmmac-axi-config {
-				snps,wr_osr_lmt = <0x7>;
-				snps,rd_osr_lmt = <0x7>;
-				snps,blen = <0 0 0 0 16 8 4>;
+				stmmac_axi_config_0: stmmac-axi-config {
+					snps,wr_osr_lmt = <0x7>;
+					snps,rd_osr_lmt = <0x7>;
+					snps,blen = <0 0 0 0 16 8 4>;
+				};
 			};
-		};
 
-		usbh_ohci: usb@5800c000 {
-			compatible = "generic-ohci";
-			reg = <0x5800c000 0x1000>;
-			clocks = <&usbphyc>, <&rcc USBH>;
-			resets = <&rcc USBH_R>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&usbphyc_port0>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		usbh_ehci: usb@5800d000 {
-			compatible = "generic-ehci";
-			reg = <0x5800d000 0x1000>;
-			clocks = <&usbphyc>, <&rcc USBH>;
-			resets = <&rcc USBH_R>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			companion = <&usbh_ohci>;
-			phys = <&usbphyc_port0>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ltdc: display-controller@5a001000 {
-			compatible = "st,stm32-ltdc";
-			reg = <0x5a001000 0x400>;
-			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc LTDC_PX>;
-			clock-names = "lcd";
-			resets = <&rcc LTDC_R>;
-			status = "disabled";
-		};
-
-		iwdg2: watchdog@5a002000 {
-			compatible = "st,stm32mp1-iwdg";
-			reg = <0x5a002000 0x400>;
-			clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
-			clock-names = "pclk", "lsi";
-			status = "disabled";
-		};
-
-		usbphyc: usbphyc@5a006000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#clock-cells = <0>;
-			compatible = "st,stm32mp1-usbphyc";
-			reg = <0x5a006000 0x1000>;
-			clocks = <&rcc USBPHY_K>;
-			resets = <&rcc USBPHY_R>;
-			vdda1v1-supply = <&reg11>;
-			vdda1v8-supply = <&reg18>;
-			status = "disabled";
-
-			usbphyc_port0: usb-phy@0 {
-				#phy-cells = <0>;
-				reg = <0>;
+			usart1: serial@5c000000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x5c000000 0x400>;
+				interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc USART1_K>;
+				wakeup-source;
+				access-controllers = <&etzpc 3>;
+				status = "disabled";
 			};
 
-			usbphyc_port1: usb-phy@1 {
-				#phy-cells = <1>;
-				reg = <1>;
+			spi6: spi@5c001000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32h7-spi";
+				reg = <0x5c001000 0x400>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc SPI6_K>;
+				resets = <&rcc SPI6_R>;
+				dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>,
+				       <&mdma1 35 0x0 0x40002 0x0 0x0>;
+				access-controllers = <&etzpc 4>;
+				dma-names = "rx", "tx";
+				status = "disabled";
 			};
-		};
-
-		usart1: serial@5c000000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x5c000000 0x400>;
-			interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc USART1_K>;
-			wakeup-source;
-			status = "disabled";
-		};
-
-		spi6: spi@5c001000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32h7-spi";
-			reg = <0x5c001000 0x400>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc SPI6_K>;
-			resets = <&rcc SPI6_R>;
-			dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>,
-			       <&mdma1 35 0x0 0x40002 0x0 0x0>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
 
-		i2c4: i2c@5c002000 {
-			compatible = "st,stm32mp15-i2c";
-			reg = <0x5c002000 0x400>;
-			interrupt-names = "event", "error";
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc I2C4_K>;
-			resets = <&rcc I2C4_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			st,syscfg-fmp = <&syscfg 0x4 0x8>;
-			wakeup-source;
-			i2c-analog-filter;
-			status = "disabled";
-		};
-
-		rtc: rtc@5c004000 {
-			compatible = "st,stm32mp1-rtc";
-			reg = <0x5c004000 0x400>;
-			clocks = <&rcc RTCAPB>, <&rcc RTC>;
-			clock-names = "pclk", "rtc_ck";
-			interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		bsec: efuse@5c005000 {
-			compatible = "st,stm32mp15-bsec";
-			reg = <0x5c005000 0x400>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			part_number_otp: part-number-otp@4 {
-				reg = <0x4 0x1>;
-			};
-			vrefint: vrefin-cal@52 {
-				reg = <0x52 0x2>;
-			};
-			ts_cal1: calib@5c {
-				reg = <0x5c 0x2>;
-			};
-			ts_cal2: calib@5e {
-				reg = <0x5e 0x2>;
+			i2c4: i2c@5c002000 {
+				compatible = "st,stm32mp15-i2c";
+				reg = <0x5c002000 0x400>;
+				interrupt-names = "event", "error";
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc I2C4_K>;
+				resets = <&rcc I2C4_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				st,syscfg-fmp = <&syscfg 0x4 0x8>;
+				wakeup-source;
+				i2c-analog-filter;
+				access-controllers = <&etzpc 5>;
+				status = "disabled";
 			};
-		};
 
-		i2c6: i2c@5c009000 {
-			compatible = "st,stm32mp15-i2c";
-			reg = <0x5c009000 0x400>;
-			interrupt-names = "event", "error";
-			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc I2C6_K>;
-			resets = <&rcc I2C6_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			st,syscfg-fmp = <&syscfg 0x4 0x20>;
-			wakeup-source;
-			i2c-analog-filter;
-			status = "disabled";
+			i2c6: i2c@5c009000 {
+				compatible = "st,stm32mp15-i2c";
+				reg = <0x5c009000 0x400>;
+				interrupt-names = "event", "error";
+				interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc I2C6_K>;
+				resets = <&rcc I2C6_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				st,syscfg-fmp = <&syscfg 0x4 0x20>;
+				wakeup-source;
+				i2c-analog-filter;
+				access-controllers = <&etzpc 12>;
+				status = "disabled";
+			};
 		};
 
 		tamp: tamp@5c00a000 {

diff --git a/src/arm/st/stm32mp153.dtsi b/src/arm/st/stm32mp153.dtsi
index 486084e..4640daf 100644
--- a/src/arm/st/stm32mp153.dtsi
+++ b/src/arm/st/stm32mp153.dtsi

@@ -28,32 +28,34 @@
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 	};
+};
 
-	soc {
-		m_can1: can@4400e000 {
-			compatible = "bosch,m_can";
-			reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
-			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "int0", "int1";
-			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
-			clock-names = "hclk", "cclk";
-			bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
-			status = "disabled";
-		};
+&etzpc {
+	m_can1: can@4400e000 {
+		compatible = "bosch,m_can";
+		reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
+		reg-names = "m_can", "message_ram";
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+		clock-names = "hclk", "cclk";
+		bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+		access-controllers = <&etzpc 62>;
+		status = "disabled";
+	};
 
-		m_can2: can@4400f000 {
-			compatible = "bosch,m_can";
-			reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
-			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "int0", "int1";
-			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
-			clock-names = "hclk", "cclk";
-			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
-			status = "disabled";
-		};
+	m_can2: can@4400f000 {
+		compatible = "bosch,m_can";
+		reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
+		reg-names = "m_can", "message_ram";
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+		clock-names = "hclk", "cclk";
+		bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
+		access-controllers = <&etzpc 62>;
+		status = "disabled";
 	};
 };

diff --git a/src/arm/st/stm32mp157c-ed1.dts b/src/arm/st/stm32mp157c-ed1.dts
index 66ed5f9..9cf5ed1 100644
--- a/src/arm/st/stm32mp157c-ed1.dts
+++ b/src/arm/st/stm32mp157c-ed1.dts

@@ -10,6 +10,7 @@
 #include "stm32mp15-pinctrl.dtsi"
 #include "stm32mp15xxaa-pinctrl.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/mfd/st,stpmic1.h>
 
 / {
@@ -71,6 +72,17 @@
 		};
 	};
 
+	led {
+		compatible = "gpio-leds";
+		led-blue {
+			gpios = <&gpiod 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+
 	sd_switch: regulator-sd_switch {
 		compatible = "regulator-gpio";
 		regulator-name = "sd_switch";

diff --git a/src/arm/st/stm32mp15xc.dtsi b/src/arm/st/stm32mp15xc.dtsi
index b06a55a..9746571 100644
--- a/src/arm/st/stm32mp15xc.dtsi
+++ b/src/arm/st/stm32mp15xc.dtsi

@@ -4,15 +4,14 @@
  * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
  */
 
-/ {
-	soc {
-		cryp1: cryp@54001000 {
-			compatible = "st,stm32mp1-cryp";
-			reg = <0x54001000 0x400>;
-			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc CRYP1>;
-			resets = <&rcc CRYP1_R>;
-			status = "disabled";
-		};
+&etzpc {
+	cryp1: cryp@54001000 {
+		compatible = "st,stm32mp1-cryp";
+		reg = <0x54001000 0x400>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rcc CRYP1>;
+		resets = <&rcc CRYP1_R>;
+		access-controllers = <&etzpc 9>;
+		status = "disabled";
 	};
 };

diff --git a/src/arm/ti/keystone/keystone-k2g.dtsi b/src/arm/ti/keystone/keystone-k2g.dtsi
index 790b29a..dafe485 100644
--- a/src/arm/ti/keystone/keystone-k2g.dtsi
+++ b/src/arm/ti/keystone/keystone-k2g.dtsi

@@ -256,11 +256,6 @@
 
 		pmmc: system-controller@2921c00 {
 			compatible = "ti,k2g-sci";
-			/*
-			 * In case of rare platforms that does not use k2g as
-			 * system master, use /delete-property/
-			 */
-			ti,system-reboot-controller;
 			mbox-names = "rx", "tx";
 			mboxes = <&msgmgr 5 2>,
 				<&msgmgr 0 0>;

diff --git a/src/arm/ti/omap/am33xx.dtsi b/src/arm/ti/omap/am33xx.dtsi
index 989d5a6..0614ffd 100644
--- a/src/arm/ti/omap/am33xx.dtsi
+++ b/src/arm/ti/omap/am33xx.dtsi

@@ -80,7 +80,7 @@
 		 * because the can not be enabled simultaneously on a
 		 * single SoC.
 		 */
-		opp-50-300000000{
+		opp-50-300000000 {
 			/* OPP50 */
 			opp-hz = /bits/ 64 <300000000>;
 			opp-microvolt = <950000 931000 969000>;
@@ -88,7 +88,7 @@
 			opp-suspend;
 		};
 
-		opp-100-275000000{
+		opp-100-275000000 {
 			/* OPP100-1 */
 			opp-hz = /bits/ 64 <275000000>;
 			opp-microvolt = <1100000 1078000 1122000>;
@@ -96,7 +96,7 @@
 			opp-suspend;
 		};
 
-		opp-100-300000000{
+		opp-100-300000000 {
 			/* OPP100-2 */
 			opp-hz = /bits/ 64 <300000000>;
 			opp-microvolt = <1100000 1078000 1122000>;
@@ -104,7 +104,7 @@
 			opp-suspend;
 		};
 
-		opp-100-500000000{
+		opp-100-500000000 {
 			/* OPP100-3 */
 			opp-hz = /bits/ 64 <500000000>;
 			opp-microvolt = <1100000 1078000 1122000>;

diff --git a/src/arm/ti/omap/am4372.dtsi b/src/arm/ti/omap/am4372.dtsi
index 5fd1b38..0a1df30 100644
--- a/src/arm/ti/omap/am4372.dtsi
+++ b/src/arm/ti/omap/am4372.dtsi

@@ -92,7 +92,7 @@
 			opp-supported-hw = <0xFF 0x08>;
 		};
 
-		opp-800000000{
+		opp-800000000 {
 			/* OPP Turbo */
 			opp-hz = /bits/ 64 <800000000>;
 			opp-microvolt = <1260000 1234800 1285200>;

diff --git a/src/arm/ti/omap/dra76x.dtsi b/src/arm/ti/omap/dra76x.dtsi
index 1045eb2..50a02c3 100644
--- a/src/arm/ti/omap/dra76x.dtsi
+++ b/src/arm/ti/omap/dra76x.dtsi

@@ -84,35 +84,44 @@
 };
 
 &scm_conf_clocks {
-	dpll_gmac_h14x2_ctrl_ck: dpll_gmac_h14x2_ctrl_ck@3fc {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x03fc>;
-		ti,bit-shift = <20>;
-		ti,latch-bit = <26>;
-		assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>;
-		assigned-clock-rates = <80000000>;
-	};
-
-	dpll_gmac_h14x2_ctrl_mux_ck: dpll_gmac_h14x2_ctrl_mux_ck@3fc {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>;
+	/* CTRL_CORE_SMA_SW_0 */
+	clock@3fc {
+		compatible = "ti,clksel";
 		reg = <0x3fc>;
-		ti,bit-shift = <29>;
-		ti,latch-bit = <26>;
-		assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
-		assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>;
-	};
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-	mcan_clk: mcan_clk@3fc {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
-		ti,bit-shift = <27>;
-		reg = <0x3fc>;
+		dpll_gmac_h14x2_ctrl_ck: clock@20 {
+			reg = <20>;
+			clock-output-names = "dpll_gmac_h14x2_ctrl_ck";
+			compatible = "ti,divider-clock";
+			clocks = <&dpll_gmac_x2_ck>;
+			ti,max-div = <63>;
+			ti,latch-bit = <26>;
+			assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>;
+			assigned-clock-rates = <80000000>;
+			#clock-cells = <0>;
+		};
+
+		mcan_clk: clock@27 {
+			reg = <27>;
+			clock-output-names = "mcan_clk";
+			compatible = "ti,gate-clock";
+			clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
+			#clock-cells = <0>;
+		};
+
+		dpll_gmac_h14x2_ctrl_mux_ck: clock@29 {
+			reg = <29>;
+			clock-output-names = "dpll_gmac_h14x2_ctrl_mux_ck";
+			compatible = "ti,mux-clock";
+			clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>;
+			ti,latch-bit = <26>;
+			assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
+			assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>;
+			#clock-cells = <0>;
+		};
 	};
 };
 

diff --git a/src/arm/ti/omap/dra7xx-clocks.dtsi b/src/arm/ti/omap/dra7xx-clocks.dtsi
index 06466d3..04f08b8 100644
--- a/src/arm/ti/omap/dra7xx-clocks.dtsi
+++ b/src/arm/ti/omap/dra7xx-clocks.dtsi

@@ -285,13 +285,21 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_byp_mux: clock-dpll-core-byp-mux-23@12c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_core_byp_mux";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x012c>;
+	/* CM_CLKSEL_DPLL_CORE */
+	clock@12c {
+		compatible = "ti,clksel";
+		reg = <0x12c>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dpll_core_byp_mux: clock@23 {
+			reg = <23>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "dpll_core_byp_mux";
+			clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+			#clock-cells = <0>;
+		};
 	};
 
 	dpll_core_ck: clock@120 {
@@ -368,13 +376,21 @@
 		clock-div = <1>;
 	};
 
-	dpll_dsp_byp_mux: clock-dpll-dsp-byp-mux-23@240 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_dsp_byp_mux";
-		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x0240>;
+	/* CM_CLKSEL_DPLL_DSP */
+	clock@240 {
+		compatible = "ti,clksel";
+		reg = <0x240>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dpll_dsp_byp_mux: clock@23 {
+			reg = <23>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "dpll_dsp_byp_mux";
+			clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
+			#clock-cells = <0>;
+		};
 	};
 
 	dpll_dsp_ck: clock@234 {
@@ -410,13 +426,21 @@
 		clock-div = <1>;
 	};
 
-	dpll_iva_byp_mux: clock-dpll-iva-byp-mux-23@1ac {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_iva_byp_mux";
-		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x01ac>;
+	/* CM_CLKSEL_DPLL_IVA */
+	clock@1ac {
+		compatible = "ti,clksel";
+		reg = <0x1ac>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dpll_iva_byp_mux: clock@23 {
+			reg = <23>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "dpll_iva_byp_mux";
+			clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
+			#clock-cells = <0>;
+		};
 	};
 
 	dpll_iva_ck: clock@1a0 {
@@ -452,13 +476,21 @@
 		clock-div = <1>;
 	};
 
-	dpll_gpu_byp_mux: clock-dpll-gpu-byp-mux-23@2e4 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_gpu_byp_mux";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x02e4>;
+	/* CM_CLKSEL_DPLL_GPU */
+	clock@2e4 {
+		compatible = "ti,clksel";
+		reg = <0x2e4>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dpll_gpu_byp_mux: clock@23 {
+			reg = <23>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "dpll_gpu_byp_mux";
+			clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+			#clock-cells = <0>;
+		};
 	};
 
 	dpll_gpu_ck: clock@2d8 {
@@ -506,13 +538,21 @@
 		clock-div = <1>;
 	};
 
-	dpll_ddr_byp_mux: clock-dpll-ddr-byp-mux-23@21c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_ddr_byp_mux";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x021c>;
+	/* CM_CLKSEL_DPLL_DDR */
+	clock@21c {
+		compatible = "ti,clksel";
+		reg = <0x21c>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dpll_ddr_byp_mux: clock@23 {
+			reg = <23>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "dpll_ddr_byp_mux";
+			clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+			#clock-cells = <0>;
+		};
 	};
 
 	dpll_ddr_ck: clock@210 {
@@ -535,13 +575,21 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_gmac_byp_mux: clock-dpll-gmac-byp-mux-23@2b4 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_gmac_byp_mux";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x02b4>;
+	/* CM_CLKSEL_DPLL_GMAC */
+	clock@2b4 {
+		compatible = "ti,clksel";
+		reg = <0x2b4>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dpll_gmac_byp_mux: clock@23 {
+			reg = <23>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "dpll_gmac_byp_mux";
+			clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+			#clock-cells = <0>;
+		};
 	};
 
 	dpll_gmac_ck: clock@2a8 {
@@ -618,13 +666,21 @@
 		clock-div = <1>;
 	};
 
-	dpll_eve_byp_mux: clock-dpll-eve-byp-mux-23@290 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_eve_byp_mux";
-		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x0290>;
+	/* CM_CLKSEL_DPLL_EVE */
+	clock@290 {
+		compatible = "ti,clksel";
+		reg = <0x290>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dpll_eve_byp_mux: clock@23 {
+			reg = <23>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "dpll_eve_byp_mux";
+			clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
+			#clock-cells = <0>;
+		};
 	};
 
 	dpll_eve_ck: clock@284 {
@@ -838,15 +894,23 @@
 		clock-div = <1>;
 	};
 
-	l3_iclk_div: clock-l3-iclk-div-4@100 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "l3_iclk_div";
-		ti,max-div = <2>;
-		ti,bit-shift = <4>;
-		reg = <0x0100>;
-		clocks = <&dpll_core_h12x2_ck>;
-		ti,index-power-of-two;
+	/* CM_CLKSEL_CORE */
+	clock@100 {
+		compatible = "ti,clksel";
+		reg = <0x100>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		l3_iclk_div: clock@4 {
+			reg = <4>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "l3_iclk_div";
+			ti,max-div = <2>;
+			clocks = <&dpll_core_h12x2_ck>;
+			ti,index-power-of-two;
+			#clock-cells = <0>;
+		};
 	};
 
 	l4_root_clk_div: clock-l4-root-clk-div {
@@ -911,12 +975,21 @@
 		ti,index-starts-at-one;
 	};
 
-	abe_dpll_sys_clk_mux: clock-abe-dpll-sys-clk-mux@118 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "abe_dpll_sys_clk_mux";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x0118>;
+	/* CM_CLKSEL_ABE_PLL_SYS */
+	clock@118 {
+		compatible = "ti,clksel";
+		reg = <0x118>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		abe_dpll_sys_clk_mux: clock@0 {
+			reg = <0>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "abe_dpll_sys_clk_mux";
+			clocks = <&sys_clkin1>, <&sys_clkin2>;
+			#clock-cells = <0>;
+		};
 	};
 
 	abe_dpll_bypass_clk_mux: clock-abe-dpll-bypass-clk-mux@114 {
@@ -1018,14 +1091,23 @@
 		ti,index-power-of-two;
 	};
 
-	dsp_gclk_div: clock-dsp-gclk-div@18c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dsp_gclk_div";
-		clocks = <&dpll_dsp_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x018c>;
-		ti,index-power-of-two;
+	/* CM_CLKSEL_DPLL_USB */
+	clock@18c {
+		compatible = "ti,clksel";
+		reg = <0x18c>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dsp_gclk_div: clock@0 {
+			reg = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "dsp_gclk_div";
+			clocks = <&dpll_dsp_m2_ck>;
+			ti,max-div = <64>;
+			ti,index-power-of-two;
+			#clock-cells = <0>;
+		};
 	};
 
 	gpu_dclk: clock-gpu-dclk@1a0 {
@@ -1326,13 +1408,21 @@
 		clock-div = <1>;
 	};
 
-	dpll_per_byp_mux: clock-dpll-per-byp-mux-23@14c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_per_byp_mux";
-		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x014c>;
+	/* CM_CLKSEL_DPLL_PER */
+	clock@14c {
+		compatible = "ti,clksel";
+		reg = <0x14c>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dpll_per_byp_mux: clock@23 {
+			reg = <23>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "dpll_per_byp_mux";
+			clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
+			#clock-cells = <0>;
+		};
 	};
 
 	dpll_per_ck: clock@140 {
@@ -1364,13 +1454,21 @@
 		clock-div = <1>;
 	};
 
-	dpll_usb_byp_mux: clock-dpll-usb-byp-mux-23@18c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_usb_byp_mux";
-		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x018c>;
+	/* CM_CLKSEL_DPLL_USB */
+	clock@18c {
+		compatible = "ti,clksel";
+		reg = <0x18c>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dpll_usb_byp_mux: clock@23 {
+			reg = <23>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "dpll_usb_byp_mux";
+			clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
+			#clock-cells = <0>;
+		};
 	};
 
 	dpll_usb_ck: clock@180 {

diff --git a/src/arm/ti/omap/omap3-n900.dts b/src/arm/ti/omap/omap3-n900.dts
index d334853..07c5b96 100644
--- a/src/arm/ti/omap/omap3-n900.dts
+++ b/src/arm/ti/omap/omap3-n900.dts

@@ -754,7 +754,7 @@
 		ti,current-limit = <100>;
 		ti,weak-battery-voltage = <3400>;
 		ti,battery-regulation-voltage = <4200>;
-		ti,charge-current = <650>;
+		ti,charge-current = <950>;
 		ti,termination-current = <100>;
 		ti,resistor-sense = <68>;
 

diff --git a/src/arm64/actions/s700-cubieboard7.dts b/src/arm64/actions/s700-cubieboard7.dts
index 63e375c..bd54b51 100644
--- a/src/arm64/actions/s700-cubieboard7.dts
+++ b/src/arm64/actions/s700-cubieboard7.dts

@@ -24,7 +24,7 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	memory@1,e0000000 {
+	memory@1e0000000 {
 		device_type = "memory";
 		reg = <0x1 0xe0000000 0x0 0x0>;
 	};

diff --git a/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts b/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts
index e6d5bc0..d1f415a 100644
--- a/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts

@@ -53,7 +53,7 @@
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 		clocks = <&rtc CLK_OSC32K_FANOUT>;

diff --git a/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts b/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts
index 0af6dcd..dec9960 100644
--- a/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts
+++ b/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts

@@ -41,7 +41,7 @@
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";

diff --git a/src/arm64/allwinner/sun50i-a64-olinuxino.dts b/src/arm64/allwinner/sun50i-a64-olinuxino.dts
index bfb806c..fd37946 100644
--- a/src/arm64/allwinner/sun50i-a64-olinuxino.dts
+++ b/src/arm64/allwinner/sun50i-a64-olinuxino.dts

@@ -52,7 +52,7 @@
 		status = "okay";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 	};

diff --git a/src/arm64/allwinner/sun50i-a64-orangepi-win.dts b/src/arm64/allwinner/sun50i-a64-orangepi-win.dts
index 4f8529d..c8303a6 100644
--- a/src/arm64/allwinner/sun50i-a64-orangepi-win.dts
+++ b/src/arm64/allwinner/sun50i-a64-orangepi-win.dts

@@ -68,7 +68,7 @@
 		status = "okay";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
 		clocks = <&rtc CLK_OSC32K_FANOUT>;

diff --git a/src/arm64/allwinner/sun50i-a64-pinebook.dts b/src/arm64/allwinner/sun50i-a64-pinebook.dts
index 50ed2e9..6c65d5b 100644
--- a/src/arm64/allwinner/sun50i-a64-pinebook.dts
+++ b/src/arm64/allwinner/sun50i-a64-pinebook.dts

@@ -79,7 +79,7 @@
 		enable-active-high;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 	};

diff --git a/src/arm64/allwinner/sun50i-a64-pinephone.dtsi b/src/arm64/allwinner/sun50i-a64-pinephone.dtsi
index 8784711..6eab61a 100644
--- a/src/arm64/allwinner/sun50i-a64-pinephone.dtsi
+++ b/src/arm64/allwinner/sun50i-a64-pinephone.dtsi

@@ -39,25 +39,35 @@
 	leds {
 		compatible = "gpio-leds";
 
-		led-0 {
+		led0: led-0 {
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_BLUE>;
 			gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+			retain-state-suspended;
 		};
 
-		led-1 {
+		led1: led-1 {
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
+			retain-state-suspended;
 		};
 
-		led-2 {
+		led2: led-2 {
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_RED>;
 			gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
+			retain-state-suspended;
 		};
 	};
 
+	multi-led {
+		compatible = "leds-group-multicolor";
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_INDICATOR;
+		leds = <&led0>, <&led1>, <&led2>;
+	};
+
 	reg_ps: ps-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "ps";

diff --git a/src/arm64/allwinner/sun50i-a64-pinetab.dts b/src/arm64/allwinner/sun50i-a64-pinetab.dts
index 0a5607f..c6007df 100644
--- a/src/arm64/allwinner/sun50i-a64-pinetab.dts
+++ b/src/arm64/allwinner/sun50i-a64-pinetab.dts

@@ -98,7 +98,7 @@
 		enable-active-high;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 		post-power-on-delay-ms = <200>;

diff --git a/src/arm64/allwinner/sun50i-a64-teres-i.dts b/src/arm64/allwinner/sun50i-a64-teres-i.dts
index 1128030..b407e1d 100644
--- a/src/arm64/allwinner/sun50i-a64-teres-i.dts
+++ b/src/arm64/allwinner/sun50i-a64-teres-i.dts

@@ -74,7 +74,7 @@
 		status = "okay";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 	};

diff --git a/src/arm64/allwinner/sun50i-a64.dtsi b/src/arm64/allwinner/sun50i-a64.dtsi
index 57ac187..ce4aa44 100644
--- a/src/arm64/allwinner/sun50i-a64.dtsi
+++ b/src/arm64/allwinner/sun50i-a64.dtsi

@@ -107,27 +107,19 @@
 	gpu_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
-		opp-120000000 {
-			opp-hz = /bits/ 64 <120000000>;
-		};
-
-		opp-312000000 {
-			opp-hz = /bits/ 64 <312000000>;
-		};
-
 		opp-432000000 {
 			opp-hz = /bits/ 64 <432000000>;
 		};
 	};
 
-	osc24M: osc24M_clk {
+	osc24M: osc24M-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 		clock-output-names = "osc24M";
 	};
 
-	osc32k: osc32k_clk {
+	osc32k: osc32k-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
@@ -216,21 +208,21 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_alert1: cpu_alert1 {
+				cpu_alert1: cpu-alert1 {
 					/* milliCelsius */
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
 				};
 
-				cpu_crit: cpu_crit {
+				cpu_crit: cpu-crit {
 					/* milliCelsius */
 					temperature = <110000>;
 					hysteresis = <2000>;

diff --git a/src/arm64/allwinner/sun50i-h313-tanix-tx1.dts b/src/arm64/allwinner/sun50i-h313-tanix-tx1.dts
new file mode 100644
index 0000000..bb2cde5
--- /dev/null
+++ b/src/arm64/allwinner/sun50i-h313-tanix-tx1.dts

@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Tanix TX1";
+	compatible = "oranth,tanix-tx1", "allwinner,sun50i-h616";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &sdio_wifi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key {
+			label = "hidden";
+			linux,code = <BTN_0>;
+			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+			default-state = "on";
+		};
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&x32clk_fanout_pin>;
+		pinctrl-names = "default";
+		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC input */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_aldo1>;
+	bus-width = <8>;
+	non-removable;
+	max-frequency = <100000000>;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_dldo1>;
+	vcc-pg-supply = <&reg_aldo1>;
+	vcc-ph-supply = <&reg_dldo1>;
+	vcc-pi-supply = <&reg_dldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies VCC-PLL, so needs to be always on. */
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			/* Supplies VCC-IO, so needs to be always on. */
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1120000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "host";       /* USB A type receptable */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};

diff --git a/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts
index 4c3921a..b69032c 100644
--- a/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts
+++ b/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts

@@ -68,7 +68,7 @@
 		states = <1100000 0>, <1300000 1>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 		post-power-on-delay-ms = <200>;

diff --git a/src/arm64/allwinner/sun50i-h5-nanopi-r1s-h5.dts b/src/arm64/allwinner/sun50i-h5-nanopi-r1s-h5.dts
index a3e040d..3a7ee44 100644
--- a/src/arm64/allwinner/sun50i-h5-nanopi-r1s-h5.dts
+++ b/src/arm64/allwinner/sun50i-h5-nanopi-r1s-h5.dts

@@ -103,7 +103,7 @@
 		states = <1100000 0x0>, <1300000 0x1>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 		post-power-on-delay-ms = <200>;
@@ -170,7 +170,7 @@
 	non-removable;
 	status = "okay";
 
-	rtl8189etv: sdio_wifi@1 {
+	rtl8189etv: wifi@1 {
 		reg = <1>;
 	};
 };

diff --git a/src/arm64/allwinner/sun50i-h5-orangepi-prime.dts b/src/arm64/allwinner/sun50i-h5-orangepi-prime.dts
index d7f8bad..b699bb9 100644
--- a/src/arm64/allwinner/sun50i-h5-orangepi-prime.dts
+++ b/src/arm64/allwinner/sun50i-h5-orangepi-prime.dts

@@ -85,7 +85,7 @@
 		status = "okay";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */
 	};

diff --git a/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus.dts b/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus.dts
index 7ec5ac8..ae85131 100644
--- a/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus.dts
+++ b/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus.dts

@@ -97,7 +97,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	rtl8189ftv: sdio_wifi@1 {
+	rtl8189ftv: wifi@1 {
 		reg = <1>;
 	};
 };

diff --git a/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index 22530ac..734481e 100644
--- a/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus2.dts

@@ -52,7 +52,7 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
 		post-power-on-delay-ms = <200>;

diff --git a/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts b/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts
index 381d58c..3be1e8c 100644
--- a/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts

@@ -34,7 +34,7 @@
 		};
 	};
 
-	ext_osc32k: ext_osc32k_clk {
+	ext_osc32k: ext-osc32k-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;

diff --git a/src/arm64/allwinner/sun50i-h6-orangepi-3.dts b/src/arm64/allwinner/sun50i-h6-orangepi-3.dts
index 6fc65e8..6c3bfe3 100644
--- a/src/arm64/allwinner/sun50i-h6-orangepi-3.dts
+++ b/src/arm64/allwinner/sun50i-h6-orangepi-3.dts

@@ -33,7 +33,7 @@
 		};
 	};
 
-	ext_osc32k: ext_osc32k_clk {
+	ext_osc32k: ext-osc32k-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;

diff --git a/src/arm64/allwinner/sun50i-h6-orangepi-lite2.dts b/src/arm64/allwinner/sun50i-h6-orangepi-lite2.dts
index fb31dcb..a3f65a4 100644
--- a/src/arm64/allwinner/sun50i-h6-orangepi-lite2.dts
+++ b/src/arm64/allwinner/sun50i-h6-orangepi-lite2.dts

@@ -11,7 +11,7 @@
 		serial1 = &uart1; /* BT-UART */
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";

diff --git a/src/arm64/allwinner/sun50i-h6-orangepi.dtsi b/src/arm64/allwinner/sun50i-h6-orangepi.dtsi
index 9274512..13b0714 100644
--- a/src/arm64/allwinner/sun50i-h6-orangepi.dtsi
+++ b/src/arm64/allwinner/sun50i-h6-orangepi.dtsi

@@ -32,7 +32,7 @@
 		};
 	};
 
-	ext_osc32k: ext_osc32k_clk {
+	ext_osc32k: ext-osc32k-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;

diff --git a/src/arm64/allwinner/sun50i-h6-pine-h64-model-b.dts b/src/arm64/allwinner/sun50i-h6-pine-h64-model-b.dts
index b710f1a..66fe039 100644
--- a/src/arm64/allwinner/sun50i-h6-pine-h64-model-b.dts
+++ b/src/arm64/allwinner/sun50i-h6-pine-h64-model-b.dts

@@ -5,13 +5,13 @@
 
 #include "sun50i-h6-pine-h64.dts"
 
+/delete-node/ &reg_gmac_3v3;
+
 / {
 	model = "Pine H64 model B";
 	compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6";
 
-	/delete-node/ reg_gmac_3v3;
-
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
 		post-power-on-delay-ms = <200>;

diff --git a/src/arm64/allwinner/sun50i-h6-pine-h64.dts b/src/arm64/allwinner/sun50i-h6-pine-h64.dts
index 1ffd68f..3910393 100644
--- a/src/arm64/allwinner/sun50i-h6-pine-h64.dts
+++ b/src/arm64/allwinner/sun50i-h6-pine-h64.dts

@@ -22,7 +22,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	ext_osc32k: ext_osc32k_clk {
+	ext_osc32k: ext-osc32k-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;

diff --git a/src/arm64/allwinner/sun50i-h6.dtsi b/src/arm64/allwinner/sun50i-h6.dtsi
index d11e504..8a8591c 100644
--- a/src/arm64/allwinner/sun50i-h6.dtsi
+++ b/src/arm64/allwinner/sun50i-h6.dtsi

@@ -68,7 +68,7 @@
 		status = "disabled";
 	};
 
-	osc24M: osc24M_clk {
+	osc24M: osc24M-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;

diff --git a/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1.dtsi b/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
index af421ba..d12b01c 100644
--- a/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
+++ b/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1.dtsi

@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -62,6 +63,10 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_dldo1>;
 	/* Card detection pin is not connected */

diff --git a/src/arm64/allwinner/sun50i-h616-cpu-opp.dtsi b/src/arm64/allwinner/sun50i-h616-cpu-opp.dtsi
new file mode 100644
index 0000000..aca22a7
--- /dev/null
+++ b/src/arm64/allwinner/sun50i-h616-cpu-opp.dtsi

@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2023 Martin Botka <martin@somainline.org>
+
+/ {
+	cpu_opp_table: opp-table-cpu {
+		compatible = "allwinner,sun50i-h616-operating-points";
+		nvmem-cells = <&cpu_speed_grade>;
+		opp-shared;
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x1f>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x12>;
+		};
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x0d>;
+		};
+
+		opp-792000000 {
+			opp-hz = /bits/ 64 <792000000>;
+			opp-microvolt-speed1 = <900000>;
+			opp-microvolt-speed4 = <940000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x12>;
+		};
+
+		opp-936000000 {
+			opp-hz = /bits/ 64 <936000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x0d>;
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt-speed0 = <950000>;
+			opp-microvolt-speed1 = <940000>;
+			opp-microvolt-speed2 = <950000>;
+			opp-microvolt-speed3 = <950000>;
+			opp-microvolt-speed4 = <1020000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x1f>;
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt-speed0 = <1000000>;
+			opp-microvolt-speed2 = <1000000>;
+			opp-microvolt-speed3 = <1000000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x0d>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt-speed0 = <1050000>;
+			opp-microvolt-speed1 = <1020000>;
+			opp-microvolt-speed2 = <1050000>;
+			opp-microvolt-speed3 = <1050000>;
+			opp-microvolt-speed4 = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x1f>;
+		};
+
+		opp-1320000000 {
+			opp-hz = /bits/ 64 <1320000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x1d>;
+		};
+
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x0d>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt-speed1 = <1100000>;
+			opp-microvolt-speed3 = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x0a>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu_opp_table>;
+};

diff --git a/src/arm64/allwinner/sun50i-h616-orangepi-zero2.dts b/src/arm64/allwinner/sun50i-h616-orangepi-zero2.dts
index b5d7139..a360d85 100644
--- a/src/arm64/allwinner/sun50i-h616-orangepi-zero2.dts
+++ b/src/arm64/allwinner/sun50i-h616-orangepi-zero2.dts

@@ -6,12 +6,17 @@
 /dts-v1/;
 
 #include "sun50i-h616-orangepi-zero.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
 
 / {
 	model = "OrangePi Zero2";
 	compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
 &emac0 {
 	allwinner,rx-delay-ps = <3100>;
 	allwinner,tx-delay-ps = <700>;

diff --git a/src/arm64/allwinner/sun50i-h616-x96-mate.dts b/src/arm64/allwinner/sun50i-h616-x96-mate.dts
index 959b6fd..26d25b5 100644
--- a/src/arm64/allwinner/sun50i-h616-x96-mate.dts
+++ b/src/arm64/allwinner/sun50i-h616-x96-mate.dts

@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -32,6 +33,10 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
 &ehci0 {
 	status = "okay";
 };

diff --git a/src/arm64/allwinner/sun50i-h616.dtsi b/src/arm64/allwinner/sun50i-h616.dtsi
index b2e85e5..921d5f6 100644
--- a/src/arm64/allwinner/sun50i-h616.dtsi
+++ b/src/arm64/allwinner/sun50i-h616.dtsi

@@ -26,6 +26,7 @@
 			reg = <0>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -34,6 +35,7 @@
 			reg = <1>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -42,6 +44,7 @@
 			reg = <2>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -50,6 +53,7 @@
 			reg = <3>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -156,6 +160,10 @@
 			ths_calibration: thermal-sensor-calibration@14 {
 				reg = <0x14 0x8>;
 			};
+
+			cpu_speed_grade: cpu-speed-grade@0 {
+				reg = <0x0 2>;
+			};
 		};
 
 		watchdog: watchdog@30090a0 {
@@ -194,7 +202,7 @@
 			};
 
 			i2c0_pins: i2c0-pins {
-				pins = "PI6", "PI7";
+				pins = "PI5", "PI6";
 				function = "i2c0";
 			};
 
@@ -775,6 +783,15 @@
 			#reset-cells = <1>;
 		};
 
+		nmi_intc: interrupt-controller@7010320 {
+			compatible = "allwinner,sun50i-h616-nmi",
+				     "allwinner,sun9i-a80-nmi";
+			reg = <0x07010320 0xc>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		r_pio: pinctrl@7022000 {
 			compatible = "allwinner,sun50i-h616-r-pinctrl";
 			reg = <0x07022000 0x400>;

diff --git a/src/arm64/allwinner/sun50i-h618-longan-module-3h.dtsi b/src/arm64/allwinner/sun50i-h618-longan-module-3h.dtsi
index 8c1263a..e92d150 100644
--- a/src/arm64/allwinner/sun50i-h618-longan-module-3h.dtsi
+++ b/src/arm64/allwinner/sun50i-h618-longan-module-3h.dtsi

@@ -4,6 +4,11 @@
  */
 
 #include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
 
 &mmc2 {
 	pinctrl-names = "default";

diff --git a/src/arm64/allwinner/sun50i-h618-orangepi-zero2w.dts b/src/arm64/allwinner/sun50i-h618-orangepi-zero2w.dts
index 21ca197..6a4f0da 100644
--- a/src/arm64/allwinner/sun50i-h618-orangepi-zero2w.dts
+++ b/src/arm64/allwinner/sun50i-h618-orangepi-zero2w.dts

@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -53,6 +54,10 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &ehci1 {
 	status = "okay";
 };

diff --git a/src/arm64/allwinner/sun50i-h618-orangepi-zero3.dts b/src/arm64/allwinner/sun50i-h618-orangepi-zero3.dts
index b3b1b86..e1cd757 100644
--- a/src/arm64/allwinner/sun50i-h618-orangepi-zero3.dts
+++ b/src/arm64/allwinner/sun50i-h618-orangepi-zero3.dts

@@ -6,12 +6,17 @@
 /dts-v1/;
 
 #include "sun50i-h616-orangepi-zero.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
 
 / {
 	model = "OrangePi Zero3";
 	compatible = "xunlong,orangepi-zero3", "allwinner,sun50i-h618";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &emac0 {
 	allwinner,tx-delay-ps = <700>;
 	phy-mode = "rgmii-rxid";

diff --git a/src/arm64/allwinner/sun50i-h618-transpeed-8k618-t.dts b/src/arm64/allwinner/sun50i-h618-transpeed-8k618-t.dts
index ac0a2b7..d6631bf 100644
--- a/src/arm64/allwinner/sun50i-h618-transpeed-8k618-t.dts
+++ b/src/arm64/allwinner/sun50i-h618-transpeed-8k618-t.dts

@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -41,7 +42,7 @@
 		regulator-always-on;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
@@ -51,6 +52,10 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &ehci0 {
 	status = "okay";
 };

diff --git a/src/arm64/allwinner/sun50i-h64-remix-mini-pc.dts b/src/arm64/allwinner/sun50i-h64-remix-mini-pc.dts
index b6e3c16..ce90327 100644
--- a/src/arm64/allwinner/sun50i-h64-remix-mini-pc.dts
+++ b/src/arm64/allwinner/sun50i-h64-remix-mini-pc.dts

@@ -42,7 +42,7 @@
 		regulator-always-on;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 		post-power-on-delay-ms = <200>;
@@ -191,7 +191,7 @@
 		compatible = "x-powers,axp803";
 		reg = <0x3a3>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		x-powers,drive-vbus-en;
 
 		vin1-supply = <&reg_vcc5v>;

diff --git a/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts b/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
new file mode 100644
index 0000000..ee30584
--- /dev/null
+++ b/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts

@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Anbernic RG35XX 2024";
+	chassis-type = "handset";
+	compatible = "anbernic,rg35xx-2024", "allwinner,sun50i-h700";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys_gamepad: gpio-keys-gamepad {
+		compatible = "gpio-keys";
+
+		button-a {
+			label = "Action-Pad A";
+			gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_EAST>;
+		};
+
+		button-b {
+			label = "Action-Pad B";
+			gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			label = "D-Pad Down";
+			gpios = <&pio 4 0 GPIO_ACTIVE_LOW>; /* PE0 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-l1 {
+			label = "Key L1";
+			gpios = <&pio 0 10 GPIO_ACTIVE_LOW>; /* PA10 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_TL>;
+		};
+
+		button-l2 {
+			label = "Key L2";
+			gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_TL2>;
+		};
+
+		button-left {
+			label = "D-Pad left";
+			gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+
+		button-menu {
+			label = "Key Menu";
+			gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_MODE>;
+		};
+
+		button-r1 {
+			label = "Key R1";
+			gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_TR>;
+		};
+
+		button-r2 {
+			label = "Key R2";
+			gpios = <&pio 0 7 GPIO_ACTIVE_LOW>; /* PA7 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_TR2>;
+		};
+
+		button-right {
+			label = "D-Pad Right";
+			gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+
+		button-select {
+			label = "Key Select";
+			gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_SELECT>;
+		};
+		button-start {
+			label = "Key Start";
+			gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_START>;
+		};
+
+		button-up {
+			label = "D-Pad Up";
+			gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			label = "Action-Pad X";
+			gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_NORTH>;
+		};
+
+		button-y {
+			label = "Action Pad Y";
+			gpios = <&pio 0 2 GPIO_ACTIVE_LOW>; /* PA2 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_WEST>;
+		};
+	};
+
+	gpio-keys-volume {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button-vol-up {
+			label = "Key Volume Up";
+			gpios = <&pio 4 1 GPIO_ACTIVE_LOW>; /* PE1 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-vol-down {
+			label = "Key Volume Down";
+			gpios = <&pio 4 2 GPIO_ACTIVE_LOW>; /* PE2 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 8 12 GPIO_ACTIVE_HIGH>; /* PI12 */
+			default-state = "on";
+		};
+	};
+
+	reg_vcc5v: regulator-vcc5v { /* USB-C power input */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc1>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo3>;
+	disable-wp;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;  /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pa-supply = <&reg_cldo3>;
+	vcc-pc-supply = <&reg_cldo3>;
+	vcc-pe-supply = <&reg_cldo3>;
+	vcc-pf-supply = <&reg_cldo3>;
+	vcc-pg-supply = <&reg_aldo4>;
+	vcc-ph-supply = <&reg_cldo3>;
+	vcc-pi-supply = <&reg_cldo3>;
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp717: pmic@3a3 {
+		compatible = "x-powers,axp717";
+		reg = <0x3a3>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin4-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <940000>;
+				regulator-max-microvolt = <940000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_aldo1: aldo1 {
+				/* 1.8v - unused */
+			};
+
+			reg_aldo2: aldo2 {
+				/* 1.8v - unused */
+			};
+
+			reg_aldo3: aldo3 {
+				/* 1.8v - unused */
+			};
+
+			reg_aldo4: aldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pg";
+			};
+
+			reg_bldo1: bldo1 {
+				/* 1.8v - unused */
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pll";
+			};
+
+			reg_bldo3: bldo3 {
+				/* 2.8v - unused */
+			};
+
+			reg_bldo4: bldo4 {
+				/* 1.2v - unused */
+			};
+
+			reg_cldo1: cldo1 {
+				/* 3.3v - audio codec - not yet implemented */
+			};
+
+			reg_cldo2: cldo2 {
+				/* 3.3v - unused */
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-io";
+			};
+
+			reg_cldo4: cldo4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi";
+			};
+
+			reg_boost: boost {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5200000>;
+				regulator-name = "boost";
+			};
+
+			reg_cpusldo: cpusldo {
+				/* unused */
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+/* the AXP717 has USB type-C role switch functionality, not yet described by the binding */
+&usbotg {
+	dr_mode = "peripheral";   /* USB type-C receptable */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};

diff --git a/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-h.dts b/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-h.dts
new file mode 100644
index 0000000..6303625
--- /dev/null
+++ b/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-h.dts

@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ * Copyright (C) 2024 Chris Morgan <macroalpha82@gmail.com>.
+ */
+
+#include "sun50i-h700-anbernic-rg35xx-plus.dts"
+
+/ {
+	model = "Anbernic RG35XX H";
+	compatible = "anbernic,rg35xx-h", "allwinner,sun50i-h700";
+};
+
+&gpio_keys_gamepad {
+	button-thumbl {
+		label = "GPIO Thumb Left";
+		gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
+		linux,input-type = <EV_KEY>;
+		linux,code = <BTN_THUMBL>;
+	};
+
+	button-thumbr {
+		label = "GPIO Thumb Right";
+		gpios = <&pio 4 9 GPIO_ACTIVE_LOW>; /* PE9 */
+		linux,input-type = <EV_KEY>;
+		linux,code = <BTN_THUMBR>;
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};

diff --git a/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-plus.dts b/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-plus.dts
new file mode 100644
index 0000000..60a8e49
--- /dev/null
+++ b/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-plus.dts

@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ */
+
+#include "sun50i-h700-anbernic-rg35xx-2024.dts"
+
+/ {
+	model = "Anbernic RG35XX Plus";
+	compatible = "anbernic,rg35xx-plus", "allwinner,sun50i-h700";
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&x32clk_fanout_pin>;
+		pinctrl-names = "default";
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
+	};
+};
+
+/* SDIO WiFi RTL8821CS */
+&mmc1 {
+	vmmc-supply = <&reg_cldo4>;
+	vqmmc-supply = <&reg_aldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 15 IRQ_TYPE_LEVEL_LOW>; /* PG15 */
+		interrupt-names = "host-wake";
+	};
+};
+
+/* Bluetooth RTL8821CS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&pio 6 17 GPIO_ACTIVE_HIGH>; /* PG17 */
+		enable-gpios = <&pio 6 19 GPIO_ACTIVE_HIGH>; /* PG19 */
+		host-wake-gpios = <&pio 6 16 GPIO_ACTIVE_HIGH>; /* PG16 */
+	};
+};

diff --git a/src/arm64/altera/socfpga_stratix10.dtsi b/src/arm64/altera/socfpga_stratix10.dtsi
index 072fe20..cbbc53c 100644
--- a/src/arm64/altera/socfpga_stratix10.dtsi
+++ b/src/arm64/altera/socfpga_stratix10.dtsi

@@ -79,7 +79,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <0 170 4>,
 			     <0 171 4>,
 			     <0 172 4>,

diff --git a/src/arm64/amazon/alpine-v2.dtsi b/src/arm64/amazon/alpine-v2.dtsi
index dbf2dce..da9de49 100644
--- a/src/arm64/amazon/alpine-v2.dtsi
+++ b/src/arm64/amazon/alpine-v2.dtsi

@@ -39,6 +39,7 @@
 / {
 	model = "Annapurna Labs Alpine v2";
 	compatible = "al,alpine-v2";
+	interrupt-parent = <&gic>;
 	#address-cells = <2>;
 	#size-cells = <2>;
 
@@ -89,6 +90,22 @@
 		clock-frequency = <1000000>;
 	};
 
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -97,22 +114,6 @@
 		interrupt-parent = <&gic>;
 		ranges;
 
-		timer {
-			compatible = "arm,armv8-timer";
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-				     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-				     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-		};
-
-		pmu {
-			compatible = "arm,armv8-pmuv3";
-			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
 		gic: interrupt-controller@f0200000 {
 			compatible = "arm,gic-v3";
 			reg = <0x0 0xf0200000 0x0 0x10000>,	/* GIC Dist */
@@ -150,7 +151,7 @@
 			al,msi-num-spis = <160>;
 		};
 
-		io-fabric {
+		io-fabric@fc000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;

diff --git a/src/arm64/amazon/alpine-v3.dtsi b/src/arm64/amazon/alpine-v3.dtsi
index 3ea178a..8b6156b 100644
--- a/src/arm64/amazon/alpine-v3.dtsi
+++ b/src/arm64/amazon/alpine-v3.dtsi

@@ -244,7 +244,7 @@
 			next-level-cache = <&cluster3_l2>;
 		};
 
-		cluster0_l2: cache@0 {
+		cluster0_l2: cache-0 {
 			compatible = "cache";
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
@@ -253,7 +253,7 @@
 			cache-unified;
 		};
 
-		cluster1_l2: cache@100 {
+		cluster1_l2: cache-100 {
 			compatible = "cache";
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
@@ -262,7 +262,7 @@
 			cache-unified;
 		};
 
-		cluster2_l2: cache@200 {
+		cluster2_l2: cache-200 {
 			compatible = "cache";
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
@@ -271,7 +271,7 @@
 			cache-unified;
 		};
 
-		cluster3_l2: cache@300 {
+		cluster3_l2: cache-300 {
 			compatible = "cache";
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
@@ -318,7 +318,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		gic: interrupt-controller@f0000000 {
+		gic: interrupt-controller@f0800000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
 			interrupt-controller;
@@ -361,7 +361,7 @@
 			interrupt-parent = <&gic>;
 		};
 
-		io-fabric {
+		io-fabric@fc000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;

diff --git a/src/arm64/amd/elba-16core.dtsi b/src/arm64/amd/elba-16core.dtsi
index 568bcc3..6c1b7b8 100644
--- a/src/arm64/amd/elba-16core.dtsi
+++ b/src/arm64/amd/elba-16core.dtsi

@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
  * Copyright 2020-2023 Advanced Micro Devices, Inc.
  */

diff --git a/src/arm64/amd/elba-asic-common.dtsi b/src/arm64/amd/elba-asic-common.dtsi
index 46b6c67..d12e9a7 100644
--- a/src/arm64/amd/elba-asic-common.dtsi
+++ b/src/arm64/amd/elba-asic-common.dtsi

@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
  * Copyright 2020-2022 Advanced Micro Devices, Inc.
  */

diff --git a/src/arm64/amd/elba-asic.dts b/src/arm64/amd/elba-asic.dts
index c3f4da2..20b0fa0 100644
--- a/src/arm64/amd/elba-asic.dts
+++ b/src/arm64/amd/elba-asic.dts

@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
  * Device Tree file for AMD Pensando Elba Board.
  *

diff --git a/src/arm64/amd/elba-flash-parts.dtsi b/src/arm64/amd/elba-flash-parts.dtsi
index cf761a0..6ea2d77 100644
--- a/src/arm64/amd/elba-flash-parts.dtsi
+++ b/src/arm64/amd/elba-flash-parts.dtsi

@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
  * Copyright 2020-2023 Advanced Micro Devices, Inc.
  */

diff --git a/src/arm64/amd/elba.dtsi b/src/arm64/amd/elba.dtsi
index 674890c..758bce0 100644
--- a/src/arm64/amd/elba.dtsi
+++ b/src/arm64/amd/elba.dtsi

@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
  * Copyright 2020-2022 Advanced Micro Devices, Inc.
  */

diff --git a/src/arm64/amlogic/amlogic-a4-a113l2-ba400.dts b/src/arm64/amlogic/amlogic-a4-a113l2-ba400.dts
new file mode 100644
index 0000000..ad3127e
--- /dev/null
+++ b/src/arm64/amlogic/amlogic-a4-a113l2-ba400.dts

@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-a4.dtsi"
+
+/ {
+	model = "Amlogic A113L2 ba400 Development Board";
+	compatible = "amlogic,ba400", "amlogic,a4";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 10 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0xa00000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};

diff --git a/src/arm64/amlogic/amlogic-a4-common.dtsi b/src/arm64/amlogic/amlogic-a4-common.dtsi
new file mode 100644
index 0000000..b6106ad
--- /dev/null
+++ b/src/arm64/amlogic/amlogic-a4-common.dtsi

@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x2000>,
+			      <0x0 0xfff04000 0 0x2000>,
+			      <0x0 0xfff06000 0 0x2000>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apb: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,a4-uart",
+					     "amlogic,meson-s4-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+		};
+	};
+};

diff --git a/src/arm64/amlogic/amlogic-a4.dtsi b/src/arm64/amlogic/amlogic-a4.dtsi
new file mode 100644
index 0000000..73ca1d7
--- /dev/null
+++ b/src/arm64/amlogic/amlogic-a4.dtsi

@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#include "amlogic-a4-common.dtsi"
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+};

diff --git a/src/arm64/amlogic/amlogic-a5-a113x2-av400.dts b/src/arm64/amlogic/amlogic-a5-a113x2-av400.dts
new file mode 100644
index 0000000..11d8b88
--- /dev/null
+++ b/src/arm64/amlogic/amlogic-a5-a113x2-av400.dts

@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-a5.dtsi"
+
+/ {
+	model = "Amlogic A113X2 av400 Development Board";
+	compatible = "amlogic,av400", "amlogic,a5";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 10 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0xa00000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};

diff --git a/src/arm64/amlogic/amlogic-a5.dtsi b/src/arm64/amlogic/amlogic-a5.dtsi
new file mode 100644
index 0000000..43f68a7
--- /dev/null
+++ b/src/arm64/amlogic/amlogic-a5.dtsi

@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#include "amlogic-a4-common.dtsi"
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+		};
+	};
+};

diff --git a/src/arm64/amlogic/amlogic-t7-reset.h b/src/arm64/amlogic/amlogic-t7-reset.h
new file mode 100644
index 0000000..ec90a11
--- /dev/null
+++ b/src/arm64/amlogic/amlogic-t7-reset.h

@@ -0,0 +1,197 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __DTS_AMLOGIC_T7_RESET_H
+#define __DTS_AMLOGIC_T7_RESET_H
+
+/* RESET0 */
+/*					0-3	*/
+#define RESET_USB			4
+#define RESET_U2DRD			5
+#define RESET_U3DRD			6
+#define RESET_U3DRD_PIPE0		7
+#define RESET_U2PHY20			8
+#define RESET_U2PHY21			9
+#define RESET_GDC			10
+#define RESET_HDMI20_AES		11
+#define RESET_HDMIRX			12
+#define RESET_HDMIRX_APB		13
+#define RESET_DEWARP			14
+/*					15	*/
+#define RESET_HDMITX_CAPB3		16
+#define RESET_BRG_VCBUG_DEC		17
+#define RESET_VCBUS			18
+#define RESET_VID_PLL_DIV		19
+#define RESET_VDI6			20
+#define RESET_GE2D			21
+#define RESET_HDMITXPHY			22
+#define RESET_VID_LOCK			23
+#define RESET_VENC0			24
+#define RESET_VDAC			25
+#define RESET_VENC2			26
+#define RESET_VENC1			27
+#define RESET_RDMA			28
+#define RESET_HDMITX			29
+#define RESET_VIU			30
+#define RESET_VENC			31
+
+/* RESET1 */
+#define RESET_AUDIO			32
+#define RESET_MALI_CAPB3		33
+#define RESET_MALI			34
+#define RESET_DDR_APB			35
+#define RESET_DDR			36
+#define RESET_DOS_CAPB3			37
+#define RESET_DOS			38
+#define RESET_COMBO_DPHY_CHAN2		39
+#define RESET_DEBUG_B			40
+#define RESET_DEBUG_A			41
+#define RESET_DSP_B			42
+#define RESET_DSP_A			43
+#define RESET_PCIE_A			44
+#define RESET_PCIE_PHY			45
+#define RESET_PCIE_APB			46
+#define RESET_ANAKIN			47
+#define RESET_ETH			48
+#define RESET_EDP0_CTRL			49
+#define RESET_EDP1_CTRL			50
+#define RESET_COMBO_DPHY_CHAN0		51
+#define RESET_COMBO_DPHY_CHAN1		52
+#define RESET_DSI_LVDS_EDP_TOP		53
+#define RESET_PCIE1_PHY			54
+#define RESET_PCIE1_APB			55
+#define RESET_DDR_1			56
+/*					57	*/
+#define RESET_EDP1_PIPELINE		58
+#define RESET_EDP0_PIPELINE		59
+#define RESET_MIPI_DSI1_PHY		60
+#define RESET_MIPI_DSI0_PHY		61
+#define RESET_MIPI_DSI_A_HOST		62
+#define RESET_MIPI_DSI_B_HOST		63
+
+/* RESET2 */
+#define RESET_DEVICE_MMC_ARB		64
+#define RESET_IR_CTRL			65
+#define RESET_TS_A73			66
+#define RESET_TS_A53			67
+#define RESET_SPICC_2			68
+#define RESET_SPICC_3			69
+#define RESET_SPICC_4			70
+#define RESET_SPICC_5			71
+#define RESET_SMART_CARD		72
+#define RESET_SPICC_0			73
+#define RESET_SPICC_1			74
+#define RESET_RSA			75
+/*					76-79	*/
+#define RESET_MSR_CLK			80
+#define RESET_SPIFC			81
+#define RESET_SAR_ADC			82
+#define RESET_BT			83
+/*					84-87	*/
+#define RESET_ACODEC			88
+#define RESET_CEC			89
+#define RESET_AFIFO			90
+#define RESET_WATCHDOG			91
+/*					92-95	*/
+
+/* RESET3 */
+#define RESET_BRG_NIC1_GPV		96
+#define RESET_BRG_NIC2_GPV		97
+#define RESET_BRG_NIC3_GPV		98
+#define RESET_BRG_NIC4_GPV		99
+#define RESET_BRG_NIC5_GPV		100
+/*					101-121	*/
+#define RESET_MIPI_ISP			122
+#define RESET_BRG_ADB_MALI_1		123
+#define RESET_BRG_ADB_MALI_0		124
+#define RESET_BRG_ADB_A73		125
+#define RESET_BRG_ADB_A53		126
+#define RESET_BRG_CCI			127
+
+/* RESET4 */
+#define RESET_PWM_AO_AB			128
+#define RESET_PWM_AO_CD			129
+#define RESET_PWM_AO_EF			130
+#define RESET_PWM_AO_GH			131
+#define RESET_PWM_AB			132
+#define RESET_PWM_CD			133
+#define RESET_PWM_EF			134
+/*					135-137	*/
+#define RESET_UART_A			138
+#define RESET_UART_B			139
+#define RESET_UART_C			140
+#define RESET_UART_D			141
+#define RESET_UART_E			142
+#define RESET_UART_F			143
+#define RESET_I2C_S_A			144
+#define RESET_I2C_M_A			145
+#define RESET_I2C_M_B			146
+#define RESET_I2C_M_C			147
+#define RESET_I2C_M_D			148
+#define RESET_I2C_M_E			149
+#define RESET_I2C_M_F			150
+#define RESET_I2C_M_AO_A		151
+#define RESET_SD_EMMC_A			152
+#define RESET_SD_EMMC_B			153
+#define RESET_SD_EMMC_C			154
+#define RESET_I2C_M_AO_B		155
+#define RESET_TS_GPU			156
+#define RESET_TS_NNA			157
+#define RESET_TS_VPN			158
+#define RESET_TS_HEVC			159
+
+/* RESET5 */
+#define RESET_BRG_NOC_DDR_1		160
+#define RESET_BRG_NOC_DDR_0		161
+#define RESET_BRG_NOC_MAIN		162
+#define RESET_BRG_NOC_ALL		163
+/*					164-167	*/
+#define RESET_BRG_NIC2_SYS		168
+#define RESET_BRG_NIC2_MAIN		169
+#define RESET_BRG_NIC2_HDMI		170
+#define RESET_BRG_NIC2_ALL		171
+#define RESET_BRG_NIC3_WAVE		172
+#define RESET_BRG_NIC3_VDEC		173
+#define RESET_BRG_NIC3_HEVCF		174
+#define RESET_BRG_NIC3_HEVCB		175
+#define RESET_BRG_NIC3_HCODEC		176
+#define RESET_BRG_NIC3_GE2D		177
+#define RESET_BRG_NIC3_GDC		178
+#define RESET_BRG_NIC3_AMLOGIC		179
+#define RESET_BRG_NIC3_MAIN		180
+#define RESET_BRG_NIC3_ALL		181
+#define RESET_BRG_NIC5_VPU		182
+/*					183-185	*/
+#define RESET_BRG_NIC4_DSPB		186
+#define RESET_BRG_NIC4_DSPA		187
+#define RESET_BRG_NIC4_VAPB		188
+#define RESET_BRG_NIC4_CLK81		189
+#define RESET_BRG_NIC4_MAIN		190
+#define RESET_BRG_NIC4_ALL		191
+
+/* RESET6 */
+#define RESET_BRG_VDEC_PIPEL		192
+#define RESET_BRG_HEVCF_DMC_PIPEL	193
+#define RESET_BRG_NIC2TONIC4_PIPEL	194
+#define RESET_BRG_HDMIRXTONIC2_PIPEL	195
+#define RESET_BRG_SECTONIC4_PIPEL	196
+#define RESET_BRG_VPUTONOC_PIPEL	197
+#define RESET_BRG_NIC4TONOC_PIPEL	198
+#define RESET_BRG_NIC3TONOC_PIPEL	199
+#define RESET_BRG_NIC2TONOC_PIPEL	200
+#define RESET_BRG_NNATONOC_PIPEL	201
+#define RESET_BRG_FRISP3_PIPEL		202
+#define RESET_BRG_FRISP2_PIPEL		203
+#define RESET_BRG_FRISP1_PIPEL		204
+#define RESET_BRG_FRISP0_PIPEL		205
+/*					206-217	*/
+#define RESET_BRG_AMPIPE_NAND		218
+#define RESET_BRG_AMPIPE_ETH		219
+/*					220	*/
+#define RESET_BRG_AM2AXI0		221
+#define RESET_BRG_AM2AXI1		222
+#define RESET_BRG_AM2AXI2		223
+
+#endif /* ___DTS_AMLOGIC_T7_RESET_H */

diff --git a/src/arm64/amlogic/amlogic-t7.dtsi b/src/arm64/amlogic/amlogic-t7.dtsi
index 5248bdf..c23efc6 100644
--- a/src/arm64/amlogic/amlogic-t7.dtsi
+++ b/src/arm64/amlogic/amlogic-t7.dtsi

@@ -5,6 +5,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/amlogic,t7-pwrc.h>
+#include "amlogic-t7-reset.h"
 
 / {
 	interrupt-parent = <&gic>;
@@ -149,6 +150,12 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
 
+			reset: reset-controller@2000 {
+				compatible = "amlogic,t7-reset";
+				reg = <0x0 0x2000 0x0 0x98>;
+				#reset-cells = <1>;
+			};
+
 			watchdog@2100 {
 				compatible = "amlogic,t7-wdt";
 				reg = <0x0 0x2100 0x0 0x10>;

diff --git a/src/arm64/amlogic/meson-g12-common.dtsi b/src/arm64/amlogic/meson-g12-common.dtsi
index 9d5eab6..b058ed7 100644
--- a/src/arm64/amlogic/meson-g12-common.dtsi
+++ b/src/arm64/amlogic/meson-g12-common.dtsi

@@ -1663,9 +1663,28 @@
 								       <250000000>,
 								       <0>; /* Do Nothing */
 					};
+
+					mipi_analog_dphy: phy {
+						compatible = "amlogic,g12a-mipi-dphy-analog";
+						#phy-cells = <0>;
+						status = "disabled";
+					};
 				};
 			};
 
+			mipi_dphy: phy@44000 {
+				compatible = "amlogic,axg-mipi-dphy";
+				reg = <0x0 0x44000 0x0 0x2000>;
+				clocks = <&clkc CLKID_MIPI_DSI_PHY>;
+				clock-names = "pclk";
+				resets = <&reset RESET_MIPI_DSI_PHY>;
+				reset-names = "phy";
+				phys = <&mipi_analog_dphy>;
+				phy-names = "analog";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
 			usb3_pcie_phy: phy@46000 {
 				compatible = "amlogic,g12a-usb3-pcie-phy";
 				reg = <0x0 0x46000 0x0 0x2000>;
@@ -2152,6 +2171,15 @@
 					remote-endpoint = <&hdmi_tx_in>;
 				};
 			};
+
+			/* DPI output port */
+			dpi_port: port@2 {
+				reg = <2>;
+
+				dpi_out: endpoint {
+					remote-endpoint = <&mipi_dsi_in>;
+				};
+			};
 		};
 
 		gic: interrupt-controller@ffc01000 {
@@ -2189,6 +2217,48 @@
 				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
 			};
 
+			mipi_dsi: dsi@7000 {
+				compatible = "amlogic,meson-g12a-dw-mipi-dsi";
+				reg = <0x0 0x7000 0x0 0x1000>;
+				resets = <&reset RESET_MIPI_DSI_HOST>;
+				reset-names = "top";
+				clocks = <&clkc CLKID_MIPI_DSI_HOST>,
+					 <&clkc CLKID_MIPI_DSI_PXCLK>,
+					 <&clkc CLKID_CTS_ENCL>;
+				clock-names = "pclk", "bit", "px";
+				phys = <&mipi_dphy>;
+				phy-names = "dphy";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+
+				assigned-clocks = <&clkc CLKID_MIPI_DSI_PXCLK_SEL>,
+					 <&clkc CLKID_CTS_ENCL_SEL>,
+					 <&clkc CLKID_VCLK2_SEL>;
+				assigned-clock-parents = <&clkc CLKID_GP0_PLL>,
+					 <&clkc CLKID_VCLK2_DIV1>,
+					 <&clkc CLKID_GP0_PLL>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					/* VPU VENC Input */
+					mipi_dsi_venc_port: port@0 {
+						reg = <0>;
+
+						mipi_dsi_in: endpoint {
+							remote-endpoint = <&dpi_out>;
+						};
+					};
+
+					/* DSI Output */
+					mipi_dsi_panel_port: port@1 {
+						reg = <1>;
+					};
+				};
+			};
+
 			watchdog: watchdog@f0d0 {
 				compatible = "amlogic,meson-gxbb-wdt";
 				reg = <0x0 0xf0d0 0x0 0x10>;

diff --git a/src/arm64/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts b/src/arm64/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts
new file mode 100644
index 0000000..003efed
--- /dev/null
+++ b/src/arm64/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts

@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org>
+ * Copyright 2023 MNT Research GmbH
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-bananapi-cm4.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	model = "MNT Reform 2 with BPI-CM4 Module";
+	compatible = "mntre,reform2-cm4", "bananapi,bpi-cm4", "amlogic,a311d", "amlogic,g12b";
+	chassis-type = "laptop";
+
+	aliases {
+		ethernet0 = &ethmac;
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+	};
+
+	hdmi_connector: hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "MNT-REFORM2-BPI-CM4";
+		audio-widgets = "Headphone", "Headphone Jack",
+				"Speaker", "External Speaker",
+				"Microphone", "Mic Jack";
+		audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmin_b>;
+		audio-routing =	"TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"Headphone Jack", "HP_L",
+				"Headphone Jack", "HP_R",
+				"External Speaker", "SPK_LP",
+				"External Speaker", "SPK_LN",
+				"External Speaker", "SPK_RP",
+				"External Speaker", "SPK_RN",
+				"LINPUT1", "Mic Jack",
+				"Mic Jack", "MICB";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+					<&clkc CLKID_MPLL0>,
+					<&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-6 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		/* Analog Audio */
+		dai-link-7 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&wm8960>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-8 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+
+	reg_main_1v8: regulator-main-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&reg_main_3v3>;
+	};
+
+	reg_main_1v2: regulator-main-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&reg_main_5v>;
+	};
+
+	reg_main_3v3: regulator-main-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_main_5v: regulator-main-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_main_usb: regulator-main-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_main_5v>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm_AO_ab 0 10000 0>;
+		power-supply = <&reg_main_usb>;
+		enable-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 32 64 128 160 200 255>;
+		default-brightness-level = <6>;
+	};
+
+	panel {
+		compatible = "innolux,n125hce-gn1";
+		power-supply = <&reg_main_3v3>;
+		backlight = <&backlight>;
+		no-hpd;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&edp_bridge_out>;
+			};
+		};
+	};
+
+	clock_12288: clock_12288 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+};
+
+&mipi_analog_dphy {
+	status = "okay";
+};
+
+&mipi_dphy {
+	status = "okay";
+};
+
+&mipi_dsi {
+	status = "okay";
+
+	assigned-clocks = <&clkc CLKID_GP0_PLL>,
+			  <&clkc CLKID_MIPI_DSI_PXCLK_SEL>,
+			  <&clkc CLKID_MIPI_DSI_PXCLK>,
+			  <&clkc CLKID_CTS_ENCL_SEL>,
+			  <&clkc CLKID_VCLK2_SEL>;
+	assigned-clock-parents = <0>,
+				 <&clkc CLKID_GP0_PLL>,
+				 <0>,
+				 <&clkc CLKID_VCLK2_DIV1>,
+				 <&clkc CLKID_GP0_PLL>;
+	assigned-clock-rates = <936000000>,
+			       <0>,
+			       <936000000>,
+			       <0>,
+			       <0>;
+};
+
+&mipi_dsi_panel_port {
+	mipi_dsi_out: endpoint {
+		remote-endpoint = <&edp_bridge_in>;
+	};
+};
+
+&cecb_AO {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&pwm_AO_ab {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_ao_a_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	edp_bridge: bridge@2c {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+		enable-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_HIGH>; // PIN_24 / GPIO8
+		vccio-supply = <&reg_main_1v8>;
+		vpll-supply = <&reg_main_1v8>;
+		vcca-supply = <&reg_main_1v2>;
+		vcc-supply = <&reg_main_1v2>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				edp_bridge_in: endpoint {
+					remote-endpoint = <&mipi_dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				edp_bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	wm8960: codec@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&clock_12288>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+		wlf,shared-lrclk;
+	};
+
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&sd_emmc_b {
+	status = "okay";
+};
+
+&tdmif_a {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tdmif_b {
+	pinctrl-0 = <&tdm_b_dout0_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>, <&tdm_b_din1_pins>;
+	pinctrl-names = "default";
+
+	assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>,
+			  <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>;
+	assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+	assigned-clock-rates = <0>, <0>;
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+
+	status = "okay";
+};

diff --git a/src/arm64/amlogic/meson-khadas-vim3-ts050.dtso b/src/arm64/amlogic/meson-khadas-vim3-ts050.dtso
new file mode 100644
index 0000000..a41b4e6
--- /dev/null
+++ b/src/arm64/amlogic/meson-khadas-vim3-ts050.dtso

@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/g12a-clkc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h>
+
+/dts-v1/;
+/plugin/;
+
+/*
+ * Enable Khadas TS050 DSI Panel + Touch Controller
+ * on Khadas VIM3 (A311D) and VIM3L (S905D3)
+ */
+
+&{/} {
+	panel_backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm_AO_cd 0 25000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <200>;
+	};
+};
+
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	touch-controller@38 {
+		compatible = "edt,edt-ft5206";
+		reg = <0x38>;
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <IRQID_GPIOA_5 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio_expander 6 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <1920>;
+		status = "okay";
+	};
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	assigned-clocks = <&clkc CLKID_GP0_PLL>,
+			  <&clkc CLKID_MIPI_DSI_PXCLK_SEL>,
+			  <&clkc CLKID_MIPI_DSI_PXCLK>,
+			  <&clkc CLKID_CTS_ENCL_SEL>,
+			  <&clkc CLKID_VCLK2_SEL>;
+	assigned-clock-parents = <0>,
+				 <&clkc CLKID_GP0_PLL>,
+				 <0>,
+				 <&clkc CLKID_VCLK2_DIV1>,
+				 <&clkc CLKID_GP0_PLL>;
+	assigned-clock-rates = <960000000>,
+			       <0>,
+			       <960000000>,
+			       <0>,
+			       <0>;
+
+	panel@0 {
+		compatible = "khadas,ts050";
+		reset-gpios = <&gpio_expander 0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&gpio_expander 1 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vcc_3v3>;
+		backlight = <&panel_backlight>;
+		reg = <0>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+};
+
+&mipi_analog_dphy {
+	status = "okay";
+};
+
+&mipi_dphy {
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_c_6_pins>, <&pwm_ao_d_e_pins>;
+};

diff --git a/src/arm64/amlogic/meson-s4.dtsi b/src/arm64/amlogic/meson-s4.dtsi
index ce90b35..10896f9 100644
--- a/src/arm64/amlogic/meson-s4.dtsi
+++ b/src/arm64/amlogic/meson-s4.dtsi

@@ -65,10 +65,15 @@
 		#clock-cells = <0>;
 	};
 
-	pwrc: power-controller {
-		compatible = "amlogic,meson-s4-pwrc";
-		#power-domain-cells = <1>;
-		status = "okay";
+	firmware {
+		sm: secure-monitor {
+			compatible = "amlogic,meson-gxbb-sm";
+
+			pwrc: power-controller {
+				compatible = "amlogic,meson-s4-pwrc";
+				#power-domain-cells = <1>;
+			};
+		};
 	};
 
 	soc {

diff --git a/src/arm64/apm/apm-merlin.dts b/src/arm64/apm/apm-merlin.dts
index 2e80690..6e05cf1a 100644
--- a/src/arm64/apm/apm-merlin.dts
+++ b/src/arm64/apm/apm-merlin.dts

@@ -15,7 +15,7 @@
 
 	chosen { };
 
-	memory {
+	memory@100000000 {
 		device_type = "memory";
 		reg = < 0x1 0x00000000 0x0 0x80000000 >;
 	};

diff --git a/src/arm64/apm/apm-mustang.dts b/src/arm64/apm/apm-mustang.dts
index 033e10e..e7644cd 100644
--- a/src/arm64/apm/apm-mustang.dts
+++ b/src/arm64/apm/apm-mustang.dts

@@ -15,7 +15,7 @@
 
 	chosen { };
 
-	memory {
+	memory@100000000 {
 		device_type = "memory";
 		reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
 	};

diff --git a/src/arm64/apm/apm-shadowcat.dtsi b/src/arm64/apm/apm-shadowcat.dtsi
index 65ebac3..ea5721e 100644
--- a/src/arm64/apm/apm-shadowcat.dtsi
+++ b/src/arm64/apm/apm-shadowcat.dtsi

@@ -211,6 +211,13 @@
 		};
 	};
 
+	refclk: refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <1>;
+		clock-frequency = <100000000>;
+		clock-output-names = "refclk";
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <1 12 0xff04>;
@@ -236,13 +243,6 @@
 			#size-cells = <2>;
 			ranges;
 
-			refclk: refclk {
-				compatible = "fixed-clock";
-				#clock-cells = <1>;
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk";
-			};
-
 			pmdpll: pmdpll@170000f0 {
 				compatible = "apm,xgene-pcppll-v2-clock";
 				#clock-cells = <1>;

diff --git a/src/arm64/apm/apm-storm.dtsi b/src/arm64/apm/apm-storm.dtsi
index 988928c..532401b 100644
--- a/src/arm64/apm/apm-storm.dtsi
+++ b/src/arm64/apm/apm-storm.dtsi

@@ -112,6 +112,13 @@
 		interrupts = <1 9 0xf04>;	/* GIC Maintenence IRQ */
 	};
 
+	refclk: refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <1>;
+		clock-frequency = <100000000>;
+		clock-output-names = "refclk";
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <1 0 0xff08>,	/* Secure Phys IRQ */
@@ -122,7 +129,7 @@
 	};
 
 	pmu {
-		compatible = "apm,potenza-pmu", "arm,armv8-pmuv3";
+		compatible = "apm,potenza-pmu";
 		interrupts = <1 12 0xff04>;
 	};
 
@@ -137,12 +144,6 @@
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
-			refclk: refclk {
-				compatible = "fixed-clock";
-				#clock-cells = <1>;
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk";
-			};
 
 			pcppll: pcppll@17000100 {
 				compatible = "apm,xgene-pcppll-clock";

diff --git a/src/arm64/arm/juno-base.dtsi b/src/arm64/arm/juno-base.dtsi
index b897f55..98ed2b3 100644
--- a/src/arm64/arm/juno-base.dtsi
+++ b/src/arm64/arm/juno-base.dtsi

@@ -773,14 +773,14 @@
 			};
 		};
 
-		big_cluster_thermal_zone: big-cluster-thermal {
+		big_cluster_thermal_zone: big-cl-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 21>;
 			status = "disabled";
 		};
 
-		little_cluster_thermal_zone: little-cluster-thermal {
+		little_cluster_thermal_zone: little-cl-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 22>;

diff --git a/src/arm64/arm/juno-scmi.dtsi b/src/arm64/arm/juno-scmi.dtsi
index 31929e2..f38c5b6 100644
--- a/src/arm64/arm/juno-scmi.dtsi
+++ b/src/arm64/arm/juno-scmi.dtsi

@@ -84,11 +84,11 @@
 			thermal-sensors = <&scmi_sensors0 3>;
 		};
 
-		big-cluster-thermal {
+		big-cl-thermal {
 			thermal-sensors = <&scmi_sensors0 21>;
 		};
 
-		little-cluster-thermal {
+		little-cl-thermal {
 			thermal-sensors = <&scmi_sensors0 22>;
 		};
 

diff --git a/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts b/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts
index 8db4243..9115c99 100644
--- a/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts
+++ b/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts

@@ -102,7 +102,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 	};

diff --git a/src/arm64/broadcom/bcmbca/bcm4908.dtsi b/src/arm64/broadcom/bcmbca/bcm4908.dtsi
index e01cf4f..8b92481 100644
--- a/src/arm64/broadcom/bcmbca/bcm4908.dtsi
+++ b/src/arm64/broadcom/bcmbca/bcm4908.dtsi

@@ -594,6 +594,7 @@
 			reg-names = "nand", "nand-int-base";
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "nand_ctlrdy";
+			brcm,wp-not-connected;
 			status = "disabled";
 
 			nandcs: nand@0 {

diff --git a/src/arm64/broadcom/bcmbca/bcm94908.dts b/src/arm64/broadcom/bcmbca/bcm94908.dts
index 030ffa5..e5b3764 100644
--- a/src/arm64/broadcom/bcmbca/bcm94908.dts
+++ b/src/arm64/broadcom/bcmbca/bcm94908.dts

@@ -34,7 +34,6 @@
 };
 
 &nand_controller {
-	brcm,wp-not-connected;
 	status = "okay";
 };
 

diff --git a/src/arm64/broadcom/northstar2/ns2-svk.dts b/src/arm64/broadcom/northstar2/ns2-svk.dts
index dec5a11..f43cfe6 100644
--- a/src/arm64/broadcom/northstar2/ns2-svk.dts
+++ b/src/arm64/broadcom/northstar2/ns2-svk.dts

@@ -50,7 +50,7 @@
 		bootargs = "earlycon=uart8250,mmio32,0x66130000";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
 	};

diff --git a/src/arm64/broadcom/northstar2/ns2-xmc.dts b/src/arm64/broadcom/northstar2/ns2-xmc.dts
index 1d314f1..c50df1d 100644
--- a/src/arm64/broadcom/northstar2/ns2-xmc.dts
+++ b/src/arm64/broadcom/northstar2/ns2-xmc.dts

@@ -47,7 +47,7 @@
 		bootargs = "earlycon=uart8250,mmio32,0x66130000";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0x00000001 0x00000000>;
 	};

diff --git a/src/arm64/broadcom/northstar2/ns2.dtsi b/src/arm64/broadcom/northstar2/ns2.dtsi
index 896d1f3..cfd9fd2 100644
--- a/src/arm64/broadcom/northstar2/ns2.dtsi
+++ b/src/arm64/broadcom/northstar2/ns2.dtsi

@@ -102,7 +102,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a57-pmu";
 		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,

diff --git a/src/arm64/broadcom/stingray/stingray.dtsi b/src/arm64/broadcom/stingray/stingray.dtsi
index d8516ec..857fa42 100644
--- a/src/arm64/broadcom/stingray/stingray.dtsi
+++ b/src/arm64/broadcom/stingray/stingray.dtsi

@@ -142,7 +142,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a72-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 

diff --git a/src/arm64/cavium/thunder-88xx.dtsi b/src/arm64/cavium/thunder-88xx.dtsi
index 8ad31de..cc860a8 100644
--- a/src/arm64/cavium/thunder-88xx.dtsi
+++ b/src/arm64/cavium/thunder-88xx.dtsi

@@ -361,24 +361,24 @@
 	};
 
 	pmu {
-		compatible = "cavium,thunder-pmu", "arm,armv8-pmuv3";
+		compatible = "cavium,thunder-pmu";
 		interrupts = <1 7 4>;
 	};
 
+	refclk50mhz: refclk50mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "refclk50mhz";
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 
-		refclk50mhz: refclk50mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <50000000>;
-			clock-output-names = "refclk50mhz";
-		};
-
-		gic0: interrupt-controller@8010,00000000 {
+		gic0: interrupt-controller@801000000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
 			#address-cells = <2>;
@@ -397,7 +397,7 @@
 			};
 		};
 
-		uaa0: serial@87e0,24000000 {
+		uaa0: serial@87e024000000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x87e0 0x24000000 0x0 0x1000>;
 			interrupts = <1 21 4>;
@@ -405,7 +405,7 @@
 			clock-names = "apb_pclk";
 		};
 
-		uaa1: serial@87e0,25000000 {
+		uaa1: serial@87e025000000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x87e0 0x25000000 0x0 0x1000>;
 			interrupts = <1 22 4>;

diff --git a/src/arm64/cavium/thunder2-99xx.dts b/src/arm64/cavium/thunder2-99xx.dts
index d005e1e..89fc410 100644
--- a/src/arm64/cavium/thunder2-99xx.dts
+++ b/src/arm64/cavium/thunder2-99xx.dts

@@ -14,7 +14,7 @@
 	model = "Cavium ThunderX2 CN99XX";
 	compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0x0 0x80000000>,  /* 2G @ 2G  */
 		      <0x00000008 0x80000000 0x0 0x80000000>;  /* 2G @ 34G */

diff --git a/src/arm64/cavium/thunder2-99xx.dtsi b/src/arm64/cavium/thunder2-99xx.dtsi
index 3419bd2..6dfe78a 100644
--- a/src/arm64/cavium/thunder2-99xx.dtsi
+++ b/src/arm64/cavium/thunder2-99xx.dtsi

@@ -83,7 +83,7 @@
 	};
 
 	pmu {
-		compatible = "brcm,vulcan-pmu", "arm,armv8-pmuv3";
+		compatible = "brcm,vulcan-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; /* PMU overflow */
 	};
 
@@ -103,7 +103,6 @@
 
 		/* ECAM at 0x3000_0000 - 0x4000_0000 */
 		reg = <0x0 0x30000000  0x0 0x10000000>;
-		reg-names = "PCI ECAM";
 
 		/*
 		 * PCI ranges:

diff --git a/src/arm64/exynos/exynos5433.dtsi b/src/arm64/exynos/exynos5433.dtsi
index 7fbbec0..0b9053b 100644
--- a/src/arm64/exynos/exynos5433.dtsi
+++ b/src/arm64/exynos/exynos5433.dtsi

@@ -1468,6 +1468,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi0_bus>;
 			num-cs = <1>;
+			fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -1487,6 +1488,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi1_bus>;
 			num-cs = <1>;
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 
@@ -1506,6 +1508,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi2_bus>;
 			num-cs = <1>;
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 
@@ -1525,6 +1528,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi3_bus>;
 			num-cs = <1>;
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 
@@ -1544,6 +1548,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi4_bus>;
 			num-cs = <1>;
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 

diff --git a/src/arm64/exynos/exynos850.dtsi b/src/arm64/exynos/exynos850.dtsi
index 2ba67c3..0706c85 100644
--- a/src/arm64/exynos/exynos850.dtsi
+++ b/src/arm64/exynos/exynos850.dtsi

@@ -93,6 +93,8 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0>;
 			enable-method = "psci";
+			clocks = <&cmu_cpucl0 CLK_CLUSTER0_SCLK>;
+			clock-names = "cluster0_clk";
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
@@ -117,6 +119,8 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x100>;
 			enable-method = "psci";
+			clocks = <&cmu_cpucl1 CLK_CLUSTER1_SCLK>;
+			clock-names = "cluster1_clk";
 		};
 		cpu5: cpu@101 {
 			device_type = "cpu";
@@ -254,6 +258,28 @@
 				      "dout_peri_uart", "dout_peri_ip";
 		};
 
+		cmu_cpucl1: clock-controller@10800000 {
+			compatible = "samsung,exynos850-cmu-cpucl1";
+			reg = <0x10800000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_CPUCL1_SWITCH>,
+				 <&cmu_top CLK_DOUT_CPUCL1_DBG>;
+			clock-names = "oscclk", "dout_cpucl1_switch",
+				      "dout_cpucl1_dbg";
+		};
+
+		cmu_cpucl0: clock-controller@10900000 {
+			compatible = "samsung,exynos850-cmu-cpucl0";
+			reg = <0x10900000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_CPUCL0_SWITCH>,
+				 <&cmu_top CLK_DOUT_CPUCL0_DBG>;
+			clock-names = "oscclk", "dout_cpucl0_switch",
+				      "dout_cpucl0_dbg";
+		};
+
 		cmu_g3d: clock-controller@11400000 {
 			compatible = "samsung,exynos850-cmu-g3d";
 			reg = <0x11400000 0x8000>;

diff --git a/src/arm64/exynos/exynosautov9.dtsi b/src/arm64/exynos/exynosautov9.dtsi
index c871a2f..0248329 100644
--- a/src/arm64/exynos/exynosautov9.dtsi
+++ b/src/arm64/exynos/exynosautov9.dtsi

@@ -435,6 +435,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <256>;
 				status = "disabled";
 			};
 
@@ -526,6 +527,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <256>;
 				status = "disabled";
 			};
 
@@ -617,6 +619,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -708,6 +711,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -799,6 +803,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -890,6 +895,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -981,6 +987,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <256>;
 				status = "disabled";
 			};
 
@@ -1072,6 +1079,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -1163,6 +1171,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -1254,6 +1263,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -1345,6 +1355,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -1434,6 +1445,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 

diff --git a/src/arm64/exynos/google/gs101-oriole.dts b/src/arm64/exynos/google/gs101-oriole.dts
index 6ccade2..5e8ffe0 100644
--- a/src/arm64/exynos/google/gs101-oriole.dts
+++ b/src/arm64/exynos/google/gs101-oriole.dts

@@ -29,8 +29,8 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		pinctrl-names = "default";
 		pinctrl-0 = <&key_voldown>, <&key_volup>, <&key_power>;
+		pinctrl-names = "default";
 
 		button-vol-down {
 			label = "KEY_VOLUMEDOWN";
@@ -53,6 +53,21 @@
 			wakeup-source;
 		};
 	};
+
+	/* TODO: Remove this once PMIC is implemented  */
+	reg_placeholder: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "placeholder_reg";
+	};
+
+	/* TODO: Remove this once S2MPG11 slave PMIC is implemented  */
+	ufs_0_fixed_vcc_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "ufs-vcc";
+		gpio = <&gpp0 1 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
 };
 
 &ext_24_5m {
@@ -103,8 +118,33 @@
 };
 
 &serial_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_bus>;
+	status = "okay";
+};
+
+&ufs_0 {
+	status = "okay";
+	vcc-supply = <&ufs_0_fixed_vcc_reg>;
+};
+
+&ufs_0_phy {
+	status = "okay";
+};
+
+&usbdrd31 {
+	status = "okay";
+	vdd10-supply = <&reg_placeholder>;
+	vdd33-supply = <&reg_placeholder>;
+};
+
+&usbdrd31_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	maximum-speed = "super-speed-plus";
+	status = "okay";
+};
+
+&usbdrd31_phy {
 	status = "okay";
 };
 

diff --git a/src/arm64/exynos/google/gs101.dtsi b/src/arm64/exynos/google/gs101.dtsi
index 55e6bcb..a66e996 100644
--- a/src/arm64/exynos/google/gs101.dtsi
+++ b/src/arm64/exynos/google/gs101.dtsi

@@ -370,12 +370,398 @@
 		pinctrl_peric0: pinctrl@10840000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x10840000 0x00001000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_GPIO_PERIC0_PCLK>;
+			clock-names = "pclk";
 			interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
+		usi1: usi@109000c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1000>;
+			status = "disabled";
+
+			hsi2c_1: i2c@10900000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10900000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c1_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_1: serial@10900000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10900000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart1_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_1: spi@10900000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10900000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi1_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi2: usi@109100c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_1>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1004>;
+			status = "disabled";
+
+			hsi2c_2: i2c@10910000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10910000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_1>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c2_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_2: serial@10910000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10910000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_1>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart2_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_2: spi@10910000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10910000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_1>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi2_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi3: usi@109200c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_2>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1008>;
+			status = "disabled";
+
+			hsi2c_3: i2c@10920000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10920000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_2>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c3_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_3: serial@10920000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10920000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart3_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_3: spi@10920000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10920000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi3_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi4: usi@109300c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109300c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_3>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x100c>;
+			status = "disabled";
+
+			hsi2c_4: i2c@10930000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10930000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_3>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c4_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_4: serial@10930000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10930000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_3>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart4_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_4: spi@10930000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10930000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_3>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi4_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi5: usi@109400c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109400c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_4>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1010>;
+			status = "disabled";
+
+			hsi2c_5: i2c@10940000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10940000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_4>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c5_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_5: serial@10940000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10940000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_4>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart5_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_5: spi@10940000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10940000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_4>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi5_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi6: usi@109500c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109500c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_5>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1014>;
+			status = "disabled";
+
+			hsi2c_6: i2c@10950000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10950000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_5>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c6_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_6: serial@10950000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10950000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_5>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart6_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_6: spi@10950000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10950000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_5>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi6_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi7: usi@109600c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109600c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_6>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1018>;
+			status = "disabled";
+
+			hsi2c_7: i2c@10960000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10960000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_6>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c7_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_7: serial@10960000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10960000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_6>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart7_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_7: spi@10960000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10960000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_6>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi7_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
 		usi8: usi@109700c0 {
-			compatible = "google,gs101-usi",
-				     "samsung,exynos850-usi";
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
 			reg = <0x109700c0 0x20>;
 			ranges;
 			#address-cells = <1>;
@@ -393,18 +779,44 @@
 				interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&hsi2c8_bus>;
 				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>,
 					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>;
 				clock-names = "hsi2c", "hsi2c_pclk";
+				pinctrl-0 = <&hsi2c8_bus>;
+				pinctrl-names = "default";
 				status = "disabled";
 			};
+
+			serial_8: serial@10970000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10970000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart8_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_8: spi@10970000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10970000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi8_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
 		};
 
 		usi_uart: usi@10a000c0 {
-			compatible = "google,gs101-usi",
-				     "samsung,exynos850-usi";
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
 			reg = <0x10a000c0 0x20>;
 			ranges;
 			#address-cells = <1>;
@@ -419,16 +831,72 @@
 			serial_0: serial@10a00000 {
 				compatible = "google,gs101-uart";
 				reg = <0x10a00000 0xc0>;
-				interrupts = <GIC_SPI 634
-					      IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupts = <GIC_SPI 634 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0>,
 					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
 				clock-names = "uart", "clk_uart_baud0";
+				pinctrl-0 = <&uart0_bus>;
+				pinctrl-names = "default";
 				samsung,uart-fifosize = <256>;
 				status = "disabled";
 			};
 		};
 
+		usi14: usi@10a200c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x10a200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1028>;
+			status = "disabled";
+
+			hsi2c_14: i2c@10a20000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10a20000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c14_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_14: serial@10a20000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10a20000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart14_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_14: spi@10a20000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10a20000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi14_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
 		cmu_peric1: clock-controller@10c00000 {
 			compatible = "google,gs101-cmu-peric1";
 			reg = <0x10c00000 0x4000>;
@@ -448,12 +916,233 @@
 		pinctrl_peric1: pinctrl@10c40000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x10c40000 0x00001000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_GPIO_PERIC1_PCLK>;
+			clock-names = "pclk";
 			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
+		usi0: usi@10d100c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x10d100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_1>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x1000>;
+			status = "disabled";
+
+			hsi2c_0: i2c@10d10000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d10000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_1>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c0_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_usi0: serial@10d10000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d10000 0xc0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_1>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart0_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_0: spi@10d10000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d10000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_1>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi0_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi9: usi@10d200c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x10d200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_2>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x1004>;
+			status = "disabled";
+
+			hsi2c_9: i2c@10d20000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d20000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_2>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c9_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_9: serial@10d20000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d20000 0xc0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_2>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart9_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_9: spi@10d20000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d20000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_2>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi9_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi10: usi@10d300c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x10d300c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_3>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x1008>;
+			status = "disabled";
+
+			hsi2c_10: i2c@10d30000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d30000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_3>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c10_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_10: serial@10d30000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d30000 0xc0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_3>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart10_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_10: spi@10d30000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d30000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_3>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi10_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi11: usi@10d400c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x10d400c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_4>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x100c>;
+			status = "disabled";
+
+			hsi2c_11: i2c@10d40000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d40000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_4>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c11_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_11: serial@10d40000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d40000 0xc0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_4>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart11_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_11: spi@10d40000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d40000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_4>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi11_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
 		usi12: usi@10d500c0 {
-			compatible = "google,gs101-usi",
-				     "samsung,exynos850-usi";
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
 			reg = <0x10d500c0 0x20>;
 			ranges;
 			#address-cells = <1>;
@@ -471,11 +1160,148 @@
 				interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				pinctrl-0 = <&hsi2c12_bus>;
-				pinctrl-names = "default";
 				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>,
 					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>;
 				clock-names = "hsi2c", "hsi2c_pclk";
+				pinctrl-0 = <&hsi2c12_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_12: serial@10d50000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d50000 0xc0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart12_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_12: spi@10d50000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d50000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi12_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi13: usi@10d600c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x10d600c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_6>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x1014>;
+			status = "disabled";
+
+			hsi2c_13: i2c@10d60000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d60000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_6>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c13_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_13: serial@10d60000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d60000 0xc0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_6>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart13_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_13: spi@10d60000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d60000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_6>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi13_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		cmu_hsi0: clock-controller@11000000 {
+			compatible = "google,gs101-cmu-hsi0";
+			reg = <0x11000000 0x4000>;
+			#clock-cells = <1>;
+
+			clocks = <&ext_24_5m>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_DPGTC>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_USB31DRD>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_USBDPDBG>;
+			clock-names = "oscclk", "bus", "dpgtc", "usb31drd",
+				      "usbdpdbg";
+		};
+
+		usbdrd31_phy: phy@11100000 {
+			compatible = "google,gs101-usb31drd-phy";
+			reg = <0x11100000 0x0100>,
+			      <0x110f0000 0x0800>,
+			      <0x110e0000 0x2800>;
+			reg-names = "phy", "pcs", "pma";
+			clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_ACLK_PHYCTRL>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB20_PHY_REFCLK_26>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_CTRL_ACLK>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_CTRL_PCLK>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USBDPPHY_SCL_APB_PCLK>;
+			clock-names = "phy", "ref", "ctrl_aclk", "ctrl_pclk", "scl_pclk";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usbdrd31: usb@11110000 {
+			compatible = "google,gs101-dwusb3";
+			clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_BUS_CLK_EARLY>,
+				<&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_SUSPEND_CLK_26>,
+				<&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_LINK_ACLK>,
+				<&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_LINK_PCLK>;
+			clock-names = "bus_early", "susp_clk", "link_aclk", "link_pclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x11110000 0x10000>;
+			status = "disabled";
+
+			usbdrd31_dwc3: usb@0 {
+				compatible = "snps,dwc3";
+				clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_REF_CLK_40>;
+				clock-names = "ref";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH 0>;
+				phys = <&usbdrd31_phy 0>, <&usbdrd31_phy 1>;
+				phy-names = "usb2-phy", "usb3-phy";
 				status = "disabled";
 			};
 		};
@@ -483,15 +1309,74 @@
 		pinctrl_hsi1: pinctrl@11840000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x11840000 0x00001000>;
+			/* TODO: update once support for this CMU exists */
+			clocks = <0>;
+			clock-names = "pclk";
 			interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
+		cmu_hsi2: clock-controller@14400000 {
+			compatible = "google,gs101-cmu-hsi2";
+			reg = <0x14400000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&ext_24_5m>,
+				 <&cmu_top CLK_DOUT_CMU_HSI2_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_HSI2_PCIE>,
+				 <&cmu_top CLK_DOUT_CMU_HSI2_UFS_EMBD>,
+				 <&cmu_top CLK_DOUT_CMU_HSI2_MMC_CARD>;
+			clock-names = "oscclk", "bus", "pcie", "ufs", "mmc";
+		};
+
+		sysreg_hsi2: syscon@14420000 {
+			compatible = "google,gs101-hsi2-sysreg", "syscon";
+			reg = <0x14420000 0x10000>;
+			clocks = <&cmu_hsi2 CLK_GOUT_HSI2_SYSREG_HSI2_PCLK>;
+		};
+
 		pinctrl_hsi2: pinctrl@14440000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x14440000 0x00001000>;
+			clocks = <&cmu_hsi2 CLK_GOUT_HSI2_GPIO_HSI2_PCLK>;
+			clock-names = "pclk";
 			interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
+		ufs_0: ufs@14700000 {
+			compatible = "google,gs101-ufs";
+			reg = <0x14700000 0x200>,
+			      <0x14701100 0x200>,
+			      <0x14780000 0xa000>,
+			      <0x14600000 0x100>;
+			reg-names = "hci", "vs_hci", "unipro", "ufsp";
+			interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_ACLK>,
+				 <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_CLK_UNIPRO>,
+				 <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_FMP_CLK>,
+				 <&cmu_hsi2 CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_ACLK>,
+				 <&cmu_hsi2 CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_PCLK>,
+				 <&cmu_hsi2 CLK_GOUT_HSI2_SYSREG_HSI2_PCLK>;
+			clock-names = "core_clk", "sclk_unipro_main", "fmp",
+				      "aclk", "pclk", "sysreg";
+			freq-table-hz = <0 0>, <0 0>, <0 0>, <0 0>, <0 0>, <0 0>;
+			pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
+			pinctrl-names = "default";
+			phys = <&ufs_0_phy>;
+			phy-names = "ufs-phy";
+			samsung,sysreg = <&sysreg_hsi2 0x710>;
+			status = "disabled";
+		};
+
+		ufs_0_phy: phy@14704000 {
+			compatible = "google,gs101-ufs-phy";
+			reg = <0x14704000 0x3000>;
+			reg-names = "phy-pma";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+			clocks = <&ext_24_5m>;
+			clock-names = "ref_clk";
+			status = "disabled";
+		};
+
 		cmu_apm: clock-controller@17400000 {
 			compatible = "google,gs101-cmu-apm";
 			reg = <0x17400000 0x8000>;
@@ -514,6 +1399,8 @@
 		pinctrl_gpio_alive: pinctrl@174d0000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x174d0000 0x00001000>;
+			clocks = <&cmu_apm CLK_GOUT_APM_APBIF_GPIO_ALIVE_PCLK>;
+			clock-names = "pclk";
 
 			wakeup-interrupt-controller {
 				compatible = "google,gs101-wakeup-eint",
@@ -525,6 +1412,8 @@
 		pinctrl_far_alive: pinctrl@174e0000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x174e0000 0x00001000>;
+			clocks = <&cmu_apm CLK_GOUT_APM_APBIF_GPIO_FAR_ALIVE_PCLK>;
+			clock-names = "pclk";
 
 			wakeup-interrupt-controller {
 				compatible = "google,gs101-wakeup-eint",
@@ -536,11 +1425,17 @@
 		pinctrl_gsactrl: pinctrl@17940000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x17940000 0x00001000>;
+			/* TODO: update once support for this CMU exists */
+			clocks = <0>;
+			clock-names = "pclk";
 		};
 
 		pinctrl_gsacore: pinctrl@17a80000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x17a80000 0x00001000>;
+			/* TODO: update once support for this CMU exists */
+			clocks = <0>;
+			clock-names = "pclk";
 		};
 
 		cmu_top: clock-controller@1e080000 {

diff --git a/src/arm64/freescale/fsl-ls1012a.dtsi b/src/arm64/freescale/fsl-ls1012a.dtsi
index fe9093b..a0f7bbd 100644
--- a/src/arm64/freescale/fsl-ls1012a.dtsi
+++ b/src/arm64/freescale/fsl-ls1012a.dtsi

@@ -81,7 +81,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
 	};
 

diff --git a/src/arm64/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/src/arm64/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
index ed4e69e..195bdba 100644
--- a/src/arm64/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
+++ b/src/arm64/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts

@@ -10,7 +10,7 @@
 /dts-v1/;
 
 #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
-#include "fsl-ls1028a-kontron-sl28.dts"
+#include "fsl-ls1028a-kontron-sl28-var3.dts"
 
 / {
 	model = "Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier";

diff --git a/src/arm64/freescale/fsl-ls1028a-kontron-sl28-var3.dts b/src/arm64/freescale/fsl-ls1028a-kontron-sl28-var3.dts
new file mode 100644
index 0000000..08851ca
--- /dev/null
+++ b/src/arm64/freescale/fsl-ls1028a-kontron-sl28-var3.dts

@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 3 which has one ethernet ports.
+ *
+ * Copyright (C) 2024 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1028a-kontron-sl28.dts"
+
+/ {
+	model = "Kontron SMARC-sAL28 (Single PHY)";
+	compatible = "kontron,sl28-var3", "kontron,sl28", "fsl,ls1028a";
+};

diff --git a/src/arm64/freescale/fsl-ls1028a.dtsi b/src/arm64/freescale/fsl-ls1028a.dtsi
index ae534c2..70b8731 100644
--- a/src/arm64/freescale/fsl-ls1028a.dtsi
+++ b/src/arm64/freescale/fsl-ls1028a.dtsi

@@ -1099,21 +1099,25 @@
 				  0xc2000000 0x1 0xf8230000  0x1 0xf8230000  0x0 0x020000
 				  /* BAR4 (PF5) - non-prefetchable memory */
 				  0x82000000 0x1 0xfc000000  0x1 0xfc000000  0x0 0x400000>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 
 			enetc_port0: ethernet@0,0 {
-				compatible = "fsl,enetc";
+				compatible = "pci1957,e100", "fsl,enetc";
 				reg = <0x000000 0 0 0 0>;
 				status = "disabled";
 			};
 
 			enetc_port1: ethernet@0,1 {
-				compatible = "fsl,enetc";
+				compatible = "pci1957,e100", "fsl,enetc";
 				reg = <0x000100 0 0 0 0>;
 				status = "disabled";
 			};
 
 			enetc_port2: ethernet@0,2 {
-				compatible = "fsl,enetc";
+				compatible = "pci1957,e100", "fsl,enetc";
 				reg = <0x000200 0 0 0 0>;
 				phy-mode = "internal";
 				status = "disabled";
@@ -1126,14 +1130,14 @@
 			};
 
 			enetc_mdio_pf3: mdio@0,3 {
-				compatible = "fsl,enetc-mdio";
+				compatible = "pci1957,ee01", "fsl,enetc-mdio";
 				reg = <0x000300 0 0 0 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
 
 			ethernet@0,4 {
-				compatible = "fsl,enetc-ptp";
+				compatible = "pci1957,ee02", "fsl,enetc-ptp";
 				reg = <0x000400 0 0 0 0>;
 				clocks = <&clockgen QORIQ_CLK_HWACCEL 3>;
 				little-endian;
@@ -1143,7 +1147,7 @@
 			mscc_felix: ethernet-switch@0,5 {
 				reg = <0x000500 0 0 0 0>;
 				/* IEP INT_B */
-				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <2>;
 				status = "disabled";
 
 				mscc_felix_ports: ports {
@@ -1201,7 +1205,7 @@
 			};
 
 			enetc_port3: ethernet@0,6 {
-				compatible = "fsl,enetc";
+				compatible = "pci1957,e100", "fsl,enetc";
 				reg = <0x000600 0 0 0 0>;
 				phy-mode = "internal";
 				status = "disabled";
@@ -1216,7 +1220,7 @@
 			rcec@1f,0 {
 				reg = <0x00f800 0 0 0 0>;
 				/* IEP INT_A */
-				interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <1>;
 			};
 		};
 

diff --git a/src/arm64/freescale/fsl-ls1043a.dtsi b/src/arm64/freescale/fsl-ls1043a.dtsi
index d333b77..8ee6d8c 100644
--- a/src/arm64/freescale/fsl-ls1043a.dtsi
+++ b/src/arm64/freescale/fsl-ls1043a.dtsi

@@ -276,7 +276,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <0 106 0x4>,
 			     <0 107 0x4>,
 			     <0 95 0x4>,

diff --git a/src/arm64/freescale/fsl-ls2080a.dtsi b/src/arm64/freescale/fsl-ls2080a.dtsi
index 1aa38ed..8352197 100644
--- a/src/arm64/freescale/fsl-ls2080a.dtsi
+++ b/src/arm64/freescale/fsl-ls2080a.dtsi

@@ -12,6 +12,13 @@
 #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
 #include "fsl-ls208xa.dtsi"
 
+/ {
+	pmu {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
+	};
+};
+
 &cpu {
 	cpu0: cpu@0 {
 		device_type = "cpu";

diff --git a/src/arm64/freescale/fsl-ls2088a.dtsi b/src/arm64/freescale/fsl-ls2088a.dtsi
index 8581ea5..245bbd6 100644
--- a/src/arm64/freescale/fsl-ls2088a.dtsi
+++ b/src/arm64/freescale/fsl-ls2088a.dtsi

@@ -12,6 +12,13 @@
 #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
 #include "fsl-ls208xa.dtsi"
 
+/ {
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
+	};
+};
+
 &cpu {
 	cpu0: cpu@0 {
 		device_type = "cpu";

diff --git a/src/arm64/freescale/fsl-ls208xa.dtsi b/src/arm64/freescale/fsl-ls208xa.dtsi
index 0b72928..ccba0a1 100644
--- a/src/arm64/freescale/fsl-ls208xa.dtsi
+++ b/src/arm64/freescale/fsl-ls208xa.dtsi

@@ -247,11 +247,6 @@
 			     <1 10 4>; /* Hypervisor PPI, active-low */
 	};
 
-	pmu {
-		compatible = "arm,armv8-pmuv3";
-		interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
-	};
-
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";

diff --git a/src/arm64/freescale/fsl-lx2160a.dtsi b/src/arm64/freescale/fsl-lx2160a.dtsi
index e665c62..9605559 100644
--- a/src/arm64/freescale/fsl-lx2160a.dtsi
+++ b/src/arm64/freescale/fsl-lx2160a.dtsi

@@ -748,7 +748,10 @@
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
-			scl-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c0_scl>;
+			pinctrl-1 = <&i2c0_scl_gpio>;
+			scl-gpios = <&gpio0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -761,6 +764,10 @@
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c1_scl>;
+			pinctrl-1 = <&i2c1_scl_gpio>;
+			scl-gpios = <&gpio0 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -773,6 +780,10 @@
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c2_scl>;
+			pinctrl-1 = <&i2c2_scl_gpio>;
+			scl-gpios = <&gpio0 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -785,6 +796,10 @@
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c3_scl>;
+			pinctrl-1 = <&i2c3_scl_gpio>;
+			scl-gpios = <&gpio0 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -797,7 +812,10 @@
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
-			scl-gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c4_scl>;
+			pinctrl-1 = <&i2c4_scl_gpio>;
+			scl-gpios = <&gpio0 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -810,6 +828,10 @@
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c5_scl>;
+			pinctrl-1 = <&i2c5_scl_gpio>;
+			scl-gpios = <&gpio0 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -822,6 +844,10 @@
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c6_scl>;
+			pinctrl-1 = <&i2c6_scl_gpio>;
+			scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -834,6 +860,10 @@
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c7_scl>;
+			pinctrl-1 = <&i2c7_scl_gpio>;
+			scl-gpios = <&gpio1 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -1669,6 +1699,80 @@
 			};
 		};
 
+		pinmux_i2crv: pinmux@70010012c {
+			compatible = "pinctrl-single";
+			reg = <0x00000007 0x0010012c 0x0 0xc>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			pinctrl-single,bit-per-mux;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x7>;
+
+			i2c1_scl: i2c1-scl-pins {
+				pinctrl-single,bits = <0x0 0 0x7>;
+			};
+
+			i2c1_scl_gpio: i2c1-scl-gpio-pins {
+				pinctrl-single,bits = <0x0 0x1 0x7>;
+			};
+
+			i2c2_scl: i2c2-scl-pins {
+				pinctrl-single,bits = <0x0 0 (0x7 << 3)>;
+			};
+
+			i2c2_scl_gpio: i2c2-scl-gpio-pins {
+				pinctrl-single,bits = <0x0 (0x1 << 3) (0x7 << 3)>;
+			};
+
+			i2c3_scl: i2c3-scl-pins {
+				pinctrl-single,bits = <0x0 0 (0x7 << 6)>;
+			};
+
+			i2c3_scl_gpio: i2c3-scl-gpio-pins {
+				pinctrl-single,bits = <0x0 (0x1 << 6) (0x7 << 6)>;
+			};
+
+			i2c4_scl: i2c4-scl-pins {
+				pinctrl-single,bits = <0x0 0 (0x7 << 9)>;
+			};
+
+			i2c4_scl_gpio: i2c4-scl-gpio-pins {
+				pinctrl-single,bits = <0x0 (0x1 << 9) (0x7 << 9)>;
+			};
+
+			i2c5_scl: i2c5-scl-pins {
+				pinctrl-single,bits = <0x0 0 (0x7 << 12)>;
+			};
+
+			i2c5_scl_gpio: i2c5-scl-gpio-pins {
+				pinctrl-single,bits = <0x0 (0x1 << 12) (0x7 << 12)>;
+			};
+
+			i2c6_scl: i2c6-scl-pins {
+				pinctrl-single,bits = <0x4 0x2 0x7>;
+			};
+
+			i2c6_scl_gpio: i2c6-scl-gpio-pins {
+				pinctrl-single,bits = <0x4 0x1 0x7>;
+			};
+
+			i2c7_scl: i2c7-scl-pins {
+				pinctrl-single,bits = <0x4 0x2 0x7>;
+			};
+
+			i2c7_scl_gpio: i2c7-scl-gpio-pins {
+				pinctrl-single,bits = <0x4 0x1 0x7>;
+			};
+
+			i2c0_scl: i2c0-scl-pins {
+				pinctrl-single,bits = <0x8 0 (0x7 << 10)>;
+			};
+
+			i2c0_scl_gpio: i2c0-scl-gpio-pins {
+				pinctrl-single,bits = <0x8 (0x1 << 10) (0x7 << 10)>;
+			};
+		};
+
 		fsl_mc: fsl-mc@80c000000 {
 			compatible = "fsl,qoriq-mc";
 			reg = <0x00000008 0x0c000000 0 0x40>,

diff --git a/src/arm64/freescale/fsl-lx2162a-clearfog.dts b/src/arm64/freescale/fsl-lx2162a-clearfog.dts
index 9f88583..eafef87 100644
--- a/src/arm64/freescale/fsl-lx2162a-clearfog.dts
+++ b/src/arm64/freescale/fsl-lx2162a-clearfog.dts

@@ -25,6 +25,7 @@
 		i2c7 = &mpcie1_i2c;
 		i2c8 = &mpcie0_i2c;
 		i2c9 = &pcieclk_i2c;
+		i2c10 = &i2c5;
 		mmc0 = &esdhc0;
 		mmc1 = &esdhc1;
 		serial0 = &uart0;

diff --git a/src/arm64/freescale/fsl-lx2162a-sr-som.dtsi b/src/arm64/freescale/fsl-lx2162a-sr-som.dtsi
index 0580ea30..e914291 100644
--- a/src/arm64/freescale/fsl-lx2162a-sr-som.dtsi
+++ b/src/arm64/freescale/fsl-lx2162a-sr-som.dtsi

@@ -71,3 +71,12 @@
 		reg = <0x54>;
 	};
 };
+
+&i2c5 {
+	status = "okay";
+
+	rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};

diff --git a/src/arm64/freescale/imx8-ss-audio.dtsi b/src/arm64/freescale/imx8-ss-audio.dtsi
index 07afeb7..897cbb7 100644
--- a/src/arm64/freescale/imx8-ss-audio.dtsi
+++ b/src/arm64/freescale/imx8-ss-audio.dtsi

@@ -6,6 +6,7 @@
 
 #include <dt-bindings/clock/imx8-clock.h>
 #include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/dma/fsl-edma.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 
 audio_ipg_clk: clock-audio-ipg {
@@ -119,13 +120,96 @@
 	#size-cells = <1>;
 	ranges = <0x59000000 0x0 0x59000000 0x1000000>;
 
+	asrc0: asrc@59000000 {
+		compatible = "fsl,imx8qm-asrc";
+		reg = <0x59000000 0x10000>;
+		interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&asrc0_lpcg IMX_LPCG_CLK_0>,
+			 <&asrc0_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_pll_div0_lpcg IMX_LPCG_CLK_4>,
+			 <&aud_pll_div1_lpcg IMX_LPCG_CLK_4>,
+			 <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>,
+			 <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "mem", "ipg",
+			      "asrck_0", "asrck_1", "asrck_2", "asrck_3",
+			      "asrck_4", "asrck_5", "asrck_6", "asrck_7",
+			      "asrck_8", "asrck_9", "asrck_a", "asrck_b",
+			      "asrck_c", "asrck_d", "asrck_e", "asrck_f",
+			      "spba";
+		dmas = <&edma0 0 0 0>,
+		       <&edma0 1 0 0>,
+		       <&edma0 2 0 0>,
+		       <&edma0 3 0 FSL_EDMA_RX>,
+		       <&edma0 4 0 FSL_EDMA_RX>,
+		       <&edma0 5 0 FSL_EDMA_RX>;
+		/* tx* is output channel of asrc, it is rx channel for eDMA */
+		dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc";
+		fsl,asrc-rate = <8000>;
+		fsl,asrc-width = <16>;
+		fsl,asrc-clk-map = <0>;
+		power-domains = <&pd IMX_SC_R_ASRC_0>;
+		status = "disabled";
+	};
+
+	esai0: esai@59010000 {
+		compatible = "fsl,imx8qm-esai";
+		reg = <0x59010000 0x10000>;
+		interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&esai0_lpcg IMX_LPCG_CLK_4>,
+			 <&esai0_lpcg IMX_LPCG_CLK_0>,
+			 <&esai0_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>;
+		clock-names = "core", "extal", "fsys", "spba";
+		dmas = <&edma0 6 0 FSL_EDMA_RX>, <&edma0 7 0 0>;
+		dma-names = "rx", "tx";
+		power-domains = <&pd IMX_SC_R_ESAI_0>;
+		status = "disabled";
+	};
+
+	spdif0: spdif@59020000 {
+		compatible = "fsl,imx8qm-spdif";
+		reg = <0x59020000 0x10000>;
+		interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, /* rx */
+			     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>; /* tx */
+		clocks = <&spdif0_lpcg IMX_LPCG_CLK_4>,	/* core */
+			 <&clk_dummy>,			/* rxtx0 */
+			 <&spdif0_lpcg IMX_LPCG_CLK_0>,	/* rxtx1 */
+			 <&clk_dummy>,			/* rxtx2 */
+			 <&clk_dummy>,			/* rxtx3 */
+			 <&clk_dummy>,			/* rxtx4 */
+			 <&audio_ipg_clk>,		/* rxtx5 */
+			 <&clk_dummy>,			/* rxtx6 */
+			 <&clk_dummy>,			/* rxtx7 */
+			 <&clk_dummy>;			/* spba */
+		clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3", "rxtx4",
+			      "rxtx5", "rxtx6", "rxtx7", "spba";
+		dmas = <&edma0 8 0 (FSL_EDMA_MULTI_FIFO | FSL_EDMA_RX)>,
+		       <&edma0 9 0 FSL_EDMA_MULTI_FIFO>;
+		dma-names = "rx", "tx";
+		power-domains = <&pd IMX_SC_R_SPDIF_0>;
+		status = "disabled";
+	};
+
 	sai0: sai@59040000 {
 		compatible = "fsl,imx8qm-sai";
 		reg = <0x59040000 0x10000>;
 		interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&sai0_lpcg 1>,
+		clocks = <&sai0_lpcg IMX_LPCG_CLK_4>,
 			 <&clk_dummy>,
-			 <&sai0_lpcg 0>,
+			 <&sai0_lpcg IMX_LPCG_CLK_0>,
 			 <&clk_dummy>,
 			 <&clk_dummy>;
 		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
@@ -139,9 +223,9 @@
 		compatible = "fsl,imx8qm-sai";
 		reg = <0x59050000 0x10000>;
 		interrupts = <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&sai1_lpcg 1>,
+		clocks = <&sai1_lpcg IMX_LPCG_CLK_4>,
 			 <&clk_dummy>,
-			 <&sai1_lpcg 0>,
+			 <&sai1_lpcg IMX_LPCG_CLK_0>,
 			 <&clk_dummy>,
 			 <&clk_dummy>;
 		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
@@ -155,9 +239,9 @@
 		compatible = "fsl,imx8qm-sai";
 		reg = <0x59060000 0x10000>;
 		interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&sai2_lpcg 1>,
+		clocks = <&sai2_lpcg IMX_LPCG_CLK_4>,
 			 <&clk_dummy>,
-			 <&sai2_lpcg 0>,
+			 <&sai2_lpcg IMX_LPCG_CLK_0>,
 			 <&clk_dummy>,
 			 <&clk_dummy>;
 		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
@@ -171,9 +255,9 @@
 		compatible = "fsl,imx8qm-sai";
 		reg = <0x59070000 0x10000>;
 		interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&sai3_lpcg 1>,
+		clocks = <&sai3_lpcg IMX_LPCG_CLK_4>,
 			 <&clk_dummy>,
-			 <&sai3_lpcg 0>,
+			 <&sai3_lpcg IMX_LPCG_CLK_0>,
 			 <&clk_dummy>,
 			 <&clk_dummy>;
 		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
@@ -239,6 +323,40 @@
 				<&pd IMX_SC_R_DMA_0_CH23>;
 	};
 
+	asrc0_lpcg: clock-controller@59400000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59400000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "asrc0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ASRC_0>;
+	};
+
+	esai0_lpcg: clock-controller@59410000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59410000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_ESAI0_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "esai0_lpcg_extal_clk",
+				     "esai0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ESAI_0>;
+	};
+
+	spdif0_lpcg: clock-controller@59420000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59420000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SPDIF0_TX_CLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spdif0_lpcg_tx_clk",
+				     "spdif0_lpcg_gclkw";
+		power-domains = <&pd IMX_SC_R_SPDIF_0>;
+	};
+
 	sai0_lpcg: clock-controller@59440000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x59440000 0x10000>;
@@ -333,6 +451,101 @@
 		status = "disabled";
 	};
 
+	asrc1: asrc@59800000 {
+		compatible = "fsl,imx8qm-asrc";
+		reg = <0x59800000 0x10000>;
+		interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&asrc1_lpcg IMX_LPCG_CLK_4>,
+			 <&asrc1_lpcg IMX_LPCG_CLK_4>,
+			 <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+			 <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>,
+			 <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "mem", "ipg",
+			      "asrck_0", "asrck_1", "asrck_2", "asrck_3",
+			      "asrck_4", "asrck_5", "asrck_6", "asrck_7",
+			      "asrck_8", "asrck_9", "asrck_a", "asrck_b",
+			      "asrck_c", "asrck_d", "asrck_e", "asrck_f",
+			      "spba";
+		dmas = <&edma1 0 0 0>,
+		       <&edma1 1 0 0>,
+		       <&edma1 2 0 0>,
+		       <&edma1 3 0 FSL_EDMA_RX>,
+		       <&edma1 4 0 FSL_EDMA_RX>,
+		       <&edma1 5 0 FSL_EDMA_RX>;
+		/* tx* is output channel of asrc, it is rx channel for eDMA */
+		dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc";
+		fsl,asrc-rate = <8000>;
+		fsl,asrc-width = <16>;
+		fsl,asrc-clk-map = <1>;
+		power-domains = <&pd IMX_SC_R_ASRC_1>;
+		status = "disabled";
+	};
+
+	sai4: sai@59820000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59820000 0x10000>;
+		interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai4_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&sai4_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dmas = <&edma1 8 0 FSL_EDMA_RX>, <&edma1 9 0 0>;
+		dma-names = "rx", "tx";
+		power-domains = <&pd IMX_SC_R_SAI_4>;
+		status = "disabled";
+	};
+
+	sai5: sai@59830000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59830000 0x10000>;
+		interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai5_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&sai5_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dmas = <&edma1 10 0 0>;
+		dma-names = "tx";
+		power-domains = <&pd IMX_SC_R_SAI_5>;
+		status = "disabled";
+	};
+
+	amix: amix@59840000 {
+		compatible = "fsl,imx8qm-audmix";
+		reg = <0x59840000 0x10000>;
+		clocks = <&amix_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg";
+		power-domains = <&pd IMX_SC_R_AMIX>;
+		dais = <&sai4>, <&sai5>;
+		status = "disabled";
+	};
+
+	mqs: mqs@59850000 {
+		compatible = "fsl,imx8qm-mqs";
+		reg = <0x59850000 0x10000>;
+		clocks = <&mqs0_lpcg IMX_LPCG_CLK_4>, <&mqs0_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "mclk", "core";
+		power-domains = <&pd IMX_SC_R_MQS_0>;
+		status = "disabled";
+	};
+
 	edma1: dma-controller@599f0000 {
 		compatible = "fsl,imx8qm-edma";
 		reg = <0x599f0000 0xc0000>;
@@ -481,4 +694,60 @@
 			      "sai3_rx_bclk",
 			      "sai4_rx_bclk";
 	};
+
+	asrc1_lpcg: clock-controller@59c00000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c00000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "asrc1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ASRC_1>;
+	};
+
+	sai4_lpcg: clock-controller@59c20000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c20000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI4_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "sai4_lpcg_mclk",
+				     "sai4_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_4>;
+	};
+
+	sai5_lpcg: clock-controller@59c30000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c30000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI5_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "sai5_lpcg_mclk",
+				     "sai5_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_5>;
+	};
+
+	amix_lpcg: clock-controller@59c40000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c40000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "amix_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_AMIX>;
+	};
+
+	mqs0_lpcg: clock-controller@59c50000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c50000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_MQS_TX_CLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "mqs0_lpcg_mclk",
+				     "mqs0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MQS_0>;
+	};
 };

diff --git a/src/arm64/freescale/imx8-ss-cm40.dtsi b/src/arm64/freescale/imx8-ss-cm40.dtsi
new file mode 100644
index 0000000..92752c0
--- /dev/null
+++ b/src/arm64/freescale/imx8-ss-cm40.dtsi

@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+cm40_ipg_clk: clock-cm40-ipg {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <132000000>;
+	clock-output-names = "cm40_ipg_clk";
+};
+
+cm40_subsys: bus@34000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x34000000 0x0 0x34000000 0x4000000>;
+	interrupt-parent = <&cm40_intmux>;
+
+	cm40_lpuart: serial@37220000 {
+		compatible = "fsl,imx8qxp-lpuart";
+		reg = <0x37220000 0x1000>;
+		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cm40_uart_lpcg IMX_LPCG_CLK_1>, <&cm40_uart_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_M4_0_UART IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_M4_0_UART>;
+		status = "disabled";
+	};
+
+	cm40_i2c: i2c@37230000 {
+		compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x37230000 0x1000>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cm40_i2c_lpcg IMX_LPCG_CLK_0>,
+			 <&cm40_i2c_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_M4_0_I2C IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_M4_0_I2C>;
+		status = "disabled";
+	};
+
+	cm40_intmux: intmux@37400000 {
+		compatible = "fsl,imx-intmux";
+		reg = <0x37400000 0x1000>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&cm40_ipg_clk>;
+		clock-names = "ipg";
+		power-domains = <&pd IMX_SC_R_M4_0_INTMUX>;
+		status = "disabled";
+	};
+
+	cm40_uart_lpcg: clock-controller@37620000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x37620000 0x1000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_M4_0_UART IMX_SC_PM_CLK_PER>,
+			 <&cm40_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>;
+		clock-output-names = "cm40_lpcg_uart_clk",
+				     "cm40_lpcg_uart_ipg_clk";
+		power-domains = <&pd IMX_SC_R_M4_0_UART>;
+	};
+
+	cm40_i2c_lpcg: clock-controller@37630000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x37630000 0x1000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_M4_0_I2C IMX_SC_PM_CLK_PER>,
+			 <&cm40_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "cm40_lpcg_i2c_clk",
+				     "cm40_lpcg_i2c_ipg_clk";
+		power-domains = <&pd IMX_SC_R_M4_0_I2C>;
+	};
+};

diff --git a/src/arm64/freescale/imx8-ss-img.dtsi b/src/arm64/freescale/imx8-ss-img.dtsi
index e7783cc..77d2928 100644
--- a/src/arm64/freescale/imx8-ss-img.dtsi
+++ b/src/arm64/freescale/imx8-ss-img.dtsi

@@ -21,7 +21,6 @@
 		interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
 			 <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
-		clock-names = "per", "ipg";
 		assigned-clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
 				  <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
 		assigned-clock-rates = <200000000>, <200000000>;
@@ -35,7 +34,6 @@
 		interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
 			 <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>;
-		clock-names = "per", "ipg";
 		assigned-clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
 				  <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>;
 		assigned-clock-rates = <200000000>, <200000000>;

diff --git a/src/arm64/freescale/imx8dx-colibri-aster.dts b/src/arm64/freescale/imx8dx-colibri-aster.dts
new file mode 100644
index 0000000..c974f5d
--- /dev/null
+++ b/src/arm64/freescale/imx8dx-colibri-aster.dts

@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8dx-colibri.dtsi"
+#include "imx8x-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8DX on Aster Board";
+	compatible = "toradex,colibri-imx8x-aster",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8dx";
+};

diff --git a/src/arm64/freescale/imx8dx-colibri-eval-v3.dts b/src/arm64/freescale/imx8dx-colibri-eval-v3.dts
new file mode 100644
index 0000000..f2bf154
--- /dev/null
+++ b/src/arm64/freescale/imx8dx-colibri-eval-v3.dts

@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8dx-colibri.dtsi"
+#include "imx8x-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8DX on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx8x-eval-v3",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8dx";
+};

diff --git a/src/arm64/freescale/imx8dx-colibri-iris-v2.dts b/src/arm64/freescale/imx8dx-colibri-iris-v2.dts
new file mode 100644
index 0000000..fd425c7
--- /dev/null
+++ b/src/arm64/freescale/imx8dx-colibri-iris-v2.dts

@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8dx-colibri.dtsi"
+#include "imx8x-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8DX on Colibri Iris V2 Board";
+	compatible = "toradex,colibri-imx8x-iris-v2",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8dx";
+};

diff --git a/src/arm64/freescale/imx8dx-colibri-iris.dts b/src/arm64/freescale/imx8dx-colibri-iris.dts
new file mode 100644
index 0000000..e5e2346
--- /dev/null
+++ b/src/arm64/freescale/imx8dx-colibri-iris.dts

@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8dx-colibri.dtsi"
+#include "imx8x-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8DX on Colibri Iris Board";
+	compatible = "toradex,colibri-imx8x-iris",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8dx";
+};

diff --git a/src/arm64/freescale/imx8dx-colibri.dtsi b/src/arm64/freescale/imx8dx-colibri.dtsi
new file mode 100644
index 0000000..66b0fcc
--- /dev/null
+++ b/src/arm64/freescale/imx8dx-colibri.dtsi

@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+#include "imx8dx.dtsi"
+#include "imx8x-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8DX Module";
+};

diff --git a/src/arm64/freescale/imx8dx.dtsi b/src/arm64/freescale/imx8dx.dtsi
new file mode 100644
index 0000000..ce76efc
--- /dev/null
+++ b/src/arm64/freescale/imx8dx.dtsi

@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8dxp.dtsi"
+
+&gpu_3d0 {
+	assigned-clock-rates = <372000000>, <372000000>;
+};

diff --git a/src/arm64/freescale/imx8dxl-evk.dts b/src/arm64/freescale/imx8dxl-evk.dts
index 2123d43..2412ab1 100644
--- a/src/arm64/freescale/imx8dxl-evk.dts
+++ b/src/arm64/freescale/imx8dxl-evk.dts

@@ -16,6 +16,8 @@
 		mmc0 = &usdhc1;
 		mmc1 = &usdhc2;
 		serial0 = &lpuart0;
+		serial1 = &lpuart1;
+		serial6 = &cm40_lpuart;
 	};
 
 	chosen {
@@ -51,6 +53,16 @@
 		};
 	};
 
+	m2_uart1_sel: regulator-m2uart1sel {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "m2_uart1_sel";
+		gpio = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
 	mux3_en: regulator-0 {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <3300000>;
@@ -340,6 +352,12 @@
 	status = "okay";
 };
 
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
 &flexcan2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan2>;
@@ -354,6 +372,16 @@
 	status = "okay";
 };
 
+&cm40_intmux {
+	status = "disabled";
+};
+
+&cm40_lpuart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cm40_lpuart>;
+	status = "disabled";
+};
+
 &lsio_gpio4 {
 	status = "okay";
 };
@@ -595,6 +623,15 @@
 		>;
 	};
 
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <
+			IMX8DXL_UART1_TX_ADMA_UART1_TX          0x06000020
+			IMX8DXL_UART1_RX_ADMA_UART1_RX          0x06000020
+			IMX8DXL_UART1_RTS_B_ADMA_UART1_RTS_B    0x06000020
+			IMX8DXL_UART1_CTS_B_ADMA_UART1_CTS_B    0x06000020
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK	0x06000041

diff --git a/src/arm64/freescale/imx8dxl.dtsi b/src/arm64/freescale/imx8dxl.dtsi
index a0674c5..7e54cf2 100644
--- a/src/arm64/freescale/imx8dxl.dtsi
+++ b/src/arm64/freescale/imx8dxl.dtsi

@@ -5,6 +5,7 @@
 
 #include <dt-bindings/clock/imx8-clock.h>
 #include <dt-bindings/dma/fsl-edma.h>
+#include <dt-bindings/clock/imx8-lpcg.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -104,7 +105,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a35-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
@@ -231,6 +232,7 @@
 	};
 
 	/* sorted in register address */
+	#include "imx8-ss-cm40.dtsi"
 	#include "imx8-ss-adma.dtsi"
 	#include "imx8-ss-conn.dtsi"
 	#include "imx8-ss-ddr.dtsi"
@@ -241,3 +243,14 @@
 #include "imx8dxl-ss-conn.dtsi"
 #include "imx8dxl-ss-lsio.dtsi"
 #include "imx8dxl-ss-ddr.dtsi"
+
+&cm40_intmux {
+	interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+};

diff --git a/src/arm64/freescale/imx8mm-evk.dtsi b/src/arm64/freescale/imx8mm-evk.dtsi
index bd5b365..90d1901 100644
--- a/src/arm64/freescale/imx8mm-evk.dtsi
+++ b/src/arm64/freescale/imx8mm-evk.dtsi

@@ -72,6 +72,20 @@
 		enable-active-high;
 	};
 
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	reg_vddext_3v3: regulator-vddext-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDEXT_3V3";
@@ -381,7 +395,7 @@
 	};
 
 	ptn5110: tcpc@50 {
-		compatible = "nxp,ptn5110";
+		compatible = "nxp,ptn5110", "tcpci";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec1>;
 		reg = <0x50>;
@@ -441,6 +455,9 @@
 		assigned-clock-rates = <24000000>;
 		powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		DOVDD-supply = <&buck5_reg>;
+		AVDD-supply = <&reg_1v8>;
+		DVDD-supply = <&reg_1v5>;
 
 		port {
 			ov5640_to_mipi_csi2: endpoint {

diff --git a/src/arm64/freescale/imx8mm-var-som-symphony.dts b/src/arm64/freescale/imx8mm-var-som-symphony.dts
index d643381..affbc67 100644
--- a/src/arm64/freescale/imx8mm-var-som-symphony.dts
+++ b/src/arm64/freescale/imx8mm-var-som-symphony.dts

@@ -117,7 +117,6 @@
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ptn5150>;
-		status = "okay";
 	};
 };
 

diff --git a/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi b/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi
index 41c9661..429be2b 100644
--- a/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi
+++ b/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi

@@ -57,7 +57,7 @@
 	status = "okay";
 
 	tpm@1 {
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
 		spi-max-frequency = <36000000>;
 	};

diff --git a/src/arm64/freescale/imx8mm-venice-gw7901.dts b/src/arm64/freescale/imx8mm-venice-gw7901.dts
index 5e2cbaf..35ae0fa 100644
--- a/src/arm64/freescale/imx8mm-venice-gw7901.dts
+++ b/src/arm64/freescale/imx8mm-venice-gw7901.dts

@@ -297,7 +297,7 @@
 	};
 
 	tpm@1 {
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
 		spi-max-frequency = <36000000>;
 	};

diff --git a/src/arm64/freescale/imx8mm-verdin-dahlia.dtsi b/src/arm64/freescale/imx8mm-verdin-dahlia.dtsi
index 1cff0b8..ce20de2 100644
--- a/src/arm64/freescale/imx8mm-verdin-dahlia.dtsi
+++ b/src/arm64/freescale/imx8mm-verdin-dahlia.dtsi

@@ -10,7 +10,7 @@
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&dailink_master>;
 		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,name = "imx8mm-wm8904";
+		simple-audio-card,name = "verdin-wm8904";
 		simple-audio-card,routing =
 			"Headphone Jack", "HPOUTL",
 			"Headphone Jack", "HPOUTR",
@@ -32,6 +32,25 @@
 			sound-dai = <&sai2>;
 		};
 	};
+
+	reg_usb_hub: regulator-usb-hub {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		regulator-name = "HUB_PWR_EN";
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		regulator-name = "PCIE_1_PWR_EN";
+		startup-delay-us = <100000>;
+	};
 };
 
 /* Verdin SPI_1 */
@@ -58,6 +77,11 @@
 	status = "okay";
 };
 
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
 /* Current measurement into module VCC */
 &hwmon {
 	status = "okay";
@@ -93,6 +117,7 @@
 
 /* Verdin PCIE_1 */
 &pcie0 {
+	vpcie-supply = <&reg_pcie>;
 	status = "okay";
 };
 
@@ -115,6 +140,11 @@
 	status = "okay";
 };
 
+/* We support turning off sleep moci on Dahlia */
+&reg_force_sleep_moci {
+	status = "disabled";
+};
+
 /* Verdin I2S_1 */
 &sai2 {
 	status = "okay";
@@ -143,8 +173,16 @@
 
 /* Verdin USB_2 */
 &usbotg2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	disable-over-current;
 	status = "okay";
+
+	usb-hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		vdd-supply = <&reg_usb_hub>;
+	};
 };
 
 /* Verdin SD_1 */

diff --git a/src/arm64/freescale/imx8mm-verdin-dev.dtsi b/src/arm64/freescale/imx8mm-verdin-dev.dtsi
index 3c4b8ca..1d8d146 100644
--- a/src/arm64/freescale/imx8mm-verdin-dev.dtsi
+++ b/src/arm64/freescale/imx8mm-verdin-dev.dtsi

@@ -10,7 +10,7 @@
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&dailink_master>;
 		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,name = "imx8mm-nau8822";
+		simple-audio-card,name = "verdin-nau8822";
 		simple-audio-card,routing =
 			"Headphones", "LHP",
 			"Headphones", "RHP",
@@ -78,6 +78,11 @@
 	status = "okay";
 };
 
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
 &gpio_expander_21 {
 	status = "okay";
 };

diff --git a/src/arm64/freescale/imx8mm-verdin-yavia.dtsi b/src/arm64/freescale/imx8mm-verdin-yavia.dtsi
index 1e28c78..763f069 100644
--- a/src/arm64/freescale/imx8mm-verdin-yavia.dtsi
+++ b/src/arm64/freescale/imx8mm-verdin-yavia.dtsi

@@ -81,6 +81,11 @@
 	pinctrl-0 = <&pinctrl_gpios_ext_yavia>;
 };
 
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
 &hwmon_temp {
 	status = "okay";
 };

diff --git a/src/arm64/freescale/imx8mm-verdin.dtsi b/src/arm64/freescale/imx8mm-verdin.dtsi
index 6f08115..9854474 100644
--- a/src/arm64/freescale/imx8mm-verdin.dtsi
+++ b/src/arm64/freescale/imx8mm-verdin.dtsi

@@ -6,6 +6,7 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 #include <dt-bindings/pwm/pwm.h>
 #include "imx8mm.dtsi"
+#include "imx8mm-overdrive.dtsi"
 
 / {
 	chosen {
@@ -110,6 +111,22 @@
 		startup-delay-us = <200000>;
 	};
 
+	/*
+	 * By default we enable CTRL_SLEEP_MOCI#, this is required to have
+	 * peripherals on the carrier board powered.
+	 * If more granularity or power saving is required this can be disabled
+	 * in the carrier board device tree files.
+	 */
+	reg_force_sleep_moci: regulator-force-sleep-moci {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "CTRL_SLEEP_MOCI#";
+	};
+
 	reg_usb_otg1_vbus: regulator-usb-otg1 {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -333,16 +350,6 @@
 			  "SODIMM_212",
 			  "SODIMM_151",
 			  "SODIMM_153";
-
-	ctrl-sleep-moci-hog {
-		gpio-hog;
-		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
-		gpios = <1 GPIO_ACTIVE_HIGH>;
-		line-name = "CTRL_SLEEP_MOCI#";
-		output-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
-	};
 };
 
 /* On-module I2C */
@@ -929,7 +936,7 @@
 	/* Verdin GPIO_9_DSI (pulled-up as active-low) */
 	pinctrl_gpio_9_dsi: gpio9dsigrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x146>;	/* SODIMM 17 */
+			<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x1c6>;	/* SODIMM 17 */
 	};
 
 	/* Verdin GPIO_10_DSI (pulled-up as active-low) */

diff --git a/src/arm64/freescale/imx8mm.dtsi b/src/arm64/freescale/imx8mm.dtsi
index 8a1b42b..9535ded 100644
--- a/src/arm64/freescale/imx8mm.dtsi
+++ b/src/arm64/freescale/imx8mm.dtsi

@@ -1168,6 +1168,13 @@
 							remote-endpoint = <&lcdif_to_dsim>;
 						};
 					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_dsi_out: endpoint {
+						};
+					};
 				};
 			};
 
@@ -1253,7 +1260,6 @@
 				reg = <0x32e40000 0x200>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
-				clock-names = "usb1_ctrl_root_clk";
 				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				phys = <&usbphynop1>;
@@ -1274,7 +1280,6 @@
 				reg = <0x32e50000 0x200>;
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
-				clock-names = "usb1_ctrl_root_clk";
 				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				phys = <&usbphynop2>;

diff --git a/src/arm64/freescale/imx8mn-ddr3l-evk.dts b/src/arm64/freescale/imx8mn-ddr3l-evk.dts
index 000e2c0..d25032e 100644
--- a/src/arm64/freescale/imx8mn-ddr3l-evk.dts
+++ b/src/arm64/freescale/imx8mn-ddr3l-evk.dts

@@ -112,3 +112,19 @@
 		};
 	};
 };
+
+&i2c2 {
+	hdmi@3d {
+		avdd-supply = <&buck5>;
+		dvdd-supply = <&buck5>;
+		pvdd-supply = <&buck5>;
+		a2vdd-supply = <&buck5>;
+		v1p2-supply = <&buck5>;
+	};
+};
+
+&i2c3 {
+	camera@3c {
+		DOVDD-supply = <&buck5>;
+	};
+};

diff --git a/src/arm64/freescale/imx8mn-ddr4-evk.dts b/src/arm64/freescale/imx8mn-ddr4-evk.dts
index cc2ff59..6d85a0b 100644
--- a/src/arm64/freescale/imx8mn-ddr4-evk.dts
+++ b/src/arm64/freescale/imx8mn-ddr4-evk.dts

@@ -158,3 +158,19 @@
 		};
 	};
 };
+
+&i2c2 {
+	hdmi@3d {
+		avdd-supply = <&buck5_reg>;
+		dvdd-supply = <&buck5_reg>;
+		pvdd-supply = <&buck5_reg>;
+		a2vdd-supply = <&buck5_reg>;
+		v1p2-supply = <&buck5_reg>;
+	};
+};
+
+&i2c3 {
+	camera@3c {
+		DOVDD-supply = <&buck5_reg>;
+	};
+};

diff --git a/src/arm64/freescale/imx8mn-evk.dts b/src/arm64/freescale/imx8mn-evk.dts
index 0b71f50..4133021 100644
--- a/src/arm64/freescale/imx8mn-evk.dts
+++ b/src/arm64/freescale/imx8mn-evk.dts

@@ -125,3 +125,19 @@
 		};
 	};
 };
+
+&i2c2 {
+	hdmi@3d {
+		avdd-supply = <&buck5>;
+		dvdd-supply = <&buck5>;
+		pvdd-supply = <&buck5>;
+		a2vdd-supply = <&buck5>;
+		v1p2-supply = <&buck5>;
+	};
+};
+
+&i2c3 {
+	camera@3c {
+		DOVDD-supply = <&buck5>;
+	};
+};

diff --git a/src/arm64/freescale/imx8mn-evk.dtsi b/src/arm64/freescale/imx8mn-evk.dtsi
index 269e70f..9e0259d 100644
--- a/src/arm64/freescale/imx8mn-evk.dtsi
+++ b/src/arm64/freescale/imx8mn-evk.dtsi

@@ -30,7 +30,7 @@
 
 		port {
 			hdmi_connector_in: endpoint {
-				remote-endpoint = <&adv7533_out>;
+				remote-endpoint = <&adv7535_out>;
 			};
 		};
 	};
@@ -52,6 +52,27 @@
 		enable-active-high;
 	};
 
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vddext_3v3: regulator-vddext-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDEXT_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
@@ -193,15 +214,11 @@
 
 	hdmi@3d {
 		compatible = "adi,adv7535";
-		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg = <0x3d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 		adi,dsi-lanes = <4>;
-
-		adi,input-depth = <8>;
-		adi,input-colorspace = "rgb";
-		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
+		v3p3-supply = <&reg_vddext_3v3>;
 
 		ports {
 			#address-cells = <1>;
@@ -210,7 +227,7 @@
 			port@0 {
 				reg = <0>;
 
-				adv7533_in: endpoint {
+				adv7535_in: endpoint {
 					remote-endpoint = <&dsi_out>;
 				};
 			};
@@ -218,7 +235,7 @@
 			port@1 {
 				reg = <1>;
 
-				adv7533_out: endpoint {
+				adv7535_out: endpoint {
 					remote-endpoint = <&hdmi_connector_in>;
 				};
 			};
@@ -227,7 +244,7 @@
 	};
 
 	ptn5110: tcpc@50 {
-		compatible = "nxp,ptn5110";
+		compatible = "nxp,ptn5110", "tcpci";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec1>;
 		reg = <0x50>;
@@ -284,6 +301,8 @@
 		assigned-clock-rates = <24000000>;
 		powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		AVDD-supply = <&reg_1v8>;
+		DVDD-supply = <&reg_1v5>;
 
 		port {
 			ov5640_to_mipi_csi2: endpoint {
@@ -335,7 +354,7 @@
 			reg = <1>;
 
 			dsi_out: endpoint {
-				remote-endpoint = <&adv7533_in>;
+				remote-endpoint = <&adv7535_in>;
 				data-lanes = <1 2 3 4>;
 			};
 		};

diff --git a/src/arm64/freescale/imx8mn-var-som-symphony.dts b/src/arm64/freescale/imx8mn-var-som-symphony.dts
index a6b94d1..3434b18 100644
--- a/src/arm64/freescale/imx8mn-var-som-symphony.dts
+++ b/src/arm64/freescale/imx8mn-var-som-symphony.dts

@@ -126,7 +126,6 @@
 		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ptn5150>;
-		status = "okay";
 
 		port {
 			typec1_dr_sw: endpoint {

diff --git a/src/arm64/freescale/imx8mn.dtsi b/src/arm64/freescale/imx8mn.dtsi
index 932c8b0..a5f9cfb 100644
--- a/src/arm64/freescale/imx8mn.dtsi
+++ b/src/arm64/freescale/imx8mn.dtsi

@@ -1104,6 +1104,13 @@
 							remote-endpoint = <&lcdif_to_dsim>;
 						};
 					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_dsi_out: endpoint {
+						};
+					};
 				};
 			};
 
@@ -1213,7 +1220,6 @@
 				reg = <0x32e40000 0x200>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
-				clock-names = "usb1_ctrl_root_clk";
 				assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>;
 				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
 				phys = <&usbphynop1>;

diff --git a/src/arm64/freescale/imx8mp-beacon-kit.dts b/src/arm64/freescale/imx8mp-beacon-kit.dts
index a080574..e5d3901 100644
--- a/src/arm64/freescale/imx8mp-beacon-kit.dts
+++ b/src/arm64/freescale/imx8mp-beacon-kit.dts

@@ -340,7 +340,7 @@
 &i2c3 {
 	/* Connected to USB Hub */
 	usb-typec@52 {
-		compatible = "nxp,ptn5110";
+		compatible = "nxp,ptn5110", "tcpci";
 		reg = <0x52>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec>;

diff --git a/src/arm64/freescale/imx8mp-debix-model-a.dts b/src/arm64/freescale/imx8mp-debix-model-a.dts
index 2c19766..9b8f97a 100644
--- a/src/arm64/freescale/imx8mp-debix-model-a.dts
+++ b/src/arm64/freescale/imx8mp-debix-model-a.dts

@@ -197,10 +197,8 @@
 };
 
 &i2c2 {
-	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
 };
 
 &i2c3 {

diff --git a/src/arm64/freescale/imx8mp-debix-som-a-bmb-08.dts b/src/arm64/freescale/imx8mp-debix-som-a-bmb-08.dts
index b11d694..d241db3 100644
--- a/src/arm64/freescale/imx8mp-debix-som-a-bmb-08.dts
+++ b/src/arm64/freescale/imx8mp-debix-som-a-bmb-08.dts

@@ -144,7 +144,6 @@
 	pinctrl-0 = <&pinctrl_eqos>;
 	nvmem-cells = <&ethmac1>;
 	nvmem-cell-names = "mac-address";
-	phy-supply = <&reg_baseboard_vdd3v3>;
 	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-id";
 	status = "okay";

diff --git a/src/arm64/freescale/imx8mp-dhcom-pdk3.dts b/src/arm64/freescale/imx8mp-dhcom-pdk3.dts
index b749e28..ac7ec75 100644
--- a/src/arm64/freescale/imx8mp-dhcom-pdk3.dts
+++ b/src/arm64/freescale/imx8mp-dhcom-pdk3.dts

@@ -167,6 +167,16 @@
 				VDDIO-supply = <&reg_vdd_3p3v_awo>;
 			};
 
+			csi2exp: gpio@24 {
+				compatible = "nxp,pca9570";
+				reg = <0x24>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"CSI2_#RESET", "CSI2_#PWDN",
+					"CSI_#PWDN", "CSI_#RESET";
+			};
+
 			typec@3d {
 				compatible = "nxp,ptn5150";
 				reg = <0x3d>;

diff --git a/src/arm64/freescale/imx8mp-dhcom-som.dtsi b/src/arm64/freescale/imx8mp-dhcom-som.dtsi
index 43f1d45..f5115f9 100644
--- a/src/arm64/freescale/imx8mp-dhcom-som.dtsi
+++ b/src/arm64/freescale/imx8mp-dhcom-som.dtsi

@@ -254,7 +254,7 @@
 				  <&clk IMX8MP_CLK_CLKOUT2>,
 				  <&clk IMX8MP_AUDIO_PLL2_OUT>;
 		assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
-		assigned-clock-rates = <13000000>, <13000000>, <156000000>;
+		assigned-clock-rates = <13000000>, <13000000>, <208000000>;
 		reset-gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
 

diff --git a/src/arm64/freescale/imx8mp-evk.dts b/src/arm64/freescale/imx8mp-evk.dts
index 9beba8d..8be5b2a 100644
--- a/src/arm64/freescale/imx8mp-evk.dts
+++ b/src/arm64/freescale/imx8mp-evk.dts

@@ -145,6 +145,27 @@
 
 	};
 
+	sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		model = "audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			link-name = "micfil hifi";
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -198,6 +219,10 @@
 	cpu-supply = <&reg_arm>;
 };
 
+&aud2htx {
+	status = "okay";
+};
+
 &eqos {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_eqos>;
@@ -524,6 +549,16 @@
 	status = "okay";
 };
 
+&micfil {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdm>;
+	assigned-clocks = <&clk IMX8MP_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <196608000>;
+	status = "okay";
+};
+
 &mipi_dsi {
 	samsung,esc-clock-frequency = <10000000>;
 	status = "okay";
@@ -790,6 +825,16 @@
 		>;
 	};
 
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_PDM_CLK		0xd6
+			MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_PDM_BIT_STREAM00	0xd6
+			MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_PDM_BIT_STREAM01	0xd6
+			MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_PDM_BIT_STREAM02	0xd6
+			MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_PDM_BIT_STREAM03	0xd6
+		>;
+	};
+
 	pinctrl_pmic: pmicgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x000001c0

diff --git a/src/arm64/freescale/imx8mp-msc-sm2s.dtsi b/src/arm64/freescale/imx8mp-msc-sm2s.dtsi
index 61c2a63..0fd5c3a 100644
--- a/src/arm64/freescale/imx8mp-msc-sm2s.dtsi
+++ b/src/arm64/freescale/imx8mp-msc-sm2s.dtsi

@@ -200,8 +200,11 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <400000>;
 	status = "okay";
 
@@ -241,8 +244,11 @@
 };
 
 &i2c6 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c6>;
+	pinctrl-1 = <&pinctrl_i2c6_gpio>;
+	scl-gpios = <&gpio3 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <400000>;
 	status = "okay";
 
@@ -602,38 +608,50 @@
 
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins =
+			<MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001e0>,
+			<MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001e0>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins =
-			<MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c3>,
-			<MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c3>;
+			<MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0x1e0>,
+			<MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0x1e0>;
 	};
 
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins =
-			<MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c3>,
-			<MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c3>;
+			<MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001e0>,
+			<MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001e0>;
 	};
 
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins =
-			<MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c3>,
-			<MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3>;
+			<MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001e0>,
+			<MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001e0>;
 	};
 
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins =
-			<MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001c3>,
-			<MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001c3>;
+			<MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001e0>,
+			<MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001e0>;
 	};
 
 	pinctrl_i2c5: i2c5grp {
 		fsl,pins =
-			<MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL		0x400001c3>,
-			<MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA		0x400001c3>;
+			<MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL		0x400001e0>,
+			<MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA		0x400001e0>;
 	};
 
 	pinctrl_i2c6: i2c6grp {
 		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL		0x400001e0>,
+			<MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA		0x400001e0>;
+	};
+
+	pinctrl_i2c6_gpio: i2c6gpiogrp {
+		fsl,pins =
-			<MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL		0x400001c3>,
-			<MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA		0x400001c3>;
+			<MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19		0x1e0>,
+			<MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x1e0>;
 	};
 
 	pinctrl_lcd0_backlight: lcd0-backlightgrp {

diff --git a/src/arm64/freescale/imx8mp-navqp.dts b/src/arm64/freescale/imx8mp-navqp.dts
new file mode 100644
index 0000000..5fd1614
--- /dev/null
+++ b/src/arm64/freescale/imx8mp-navqp.dts

@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Emcraft Systems
+ * Copyright 2024 Gilles Talis <gilles.talis@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Emcraft Systems i.MX8MPlus NavQ+ Kit";
+	compatible = "emcraft,imx8mp-navqp", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <10000>;
+			qca,disable-smarteee;
+			qca,disable-hibernation-mode;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	rtc@53 {
+		compatible = "nxp,pcf2131";
+		reg = <0x53>;
+	};
+};
+
+&uart2 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* SD Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x3
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22				0x110
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16				0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL					0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA					0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL					0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA					0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL					0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA					0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL					0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA					0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03				0x41
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19				0x41
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX				0x49
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX				0x49
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT				0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT				0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT				0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12				0x1c4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B				0xc6
+		>;
+	};
+};

diff --git a/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index 86d3da3..c51ed7d 100644
--- a/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts

@@ -135,6 +135,18 @@
 		};
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "X44";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	display: display {
 		/*
 		 * Display is not fixed, so compatible has to be added from
@@ -470,6 +482,28 @@
 			  "", "", "", "";
 };
 
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
 &i2c2 {
 	clock-frequency = <384000>;
 	pinctrl-names = "default", "gpio";
@@ -531,6 +565,10 @@
 	status = "okay";
 };
 
+&lcdif3 {
+	status = "okay";
+};
+
 &pcf85063 {
 	/* RTC_EVENT# is connected on MBa8MPxL */
 	pinctrl-names = "default";

diff --git a/src/arm64/freescale/imx8mp-venice-gw71xx.dtsi b/src/arm64/freescale/imx8mp-venice-gw71xx.dtsi
index e7bf032..2f740d7 100644
--- a/src/arm64/freescale/imx8mp-venice-gw71xx.dtsi
+++ b/src/arm64/freescale/imx8mp-venice-gw71xx.dtsi

@@ -68,7 +68,7 @@
 	status = "okay";
 
 	tpm@1 {
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
 		spi-max-frequency = <36000000>;
 	};

diff --git a/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi b/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi
index f24b147..5ab3ffe 100644
--- a/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi
+++ b/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi

@@ -8,6 +8,10 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
+	aliases {
+		ethernet1 = &eth1;
+	};
+
 	connector {
 		compatible = "gpio-usb-b-connector", "usb-b-connector";
 		pinctrl-names = "default";
@@ -152,6 +156,38 @@
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		pcie@0,0 {
+			reg = <0x0000 0 0 0 0>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			pcie@3,0 {
+				reg = <0x1800 0 0 0 0>;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				eth1: ethernet@0,0 {
+					reg = <0x0000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
+					local-mac-address = [00 00 00 00 00 00];
+				};
+			};
+		};
+	};
 };
 
 /* GPS */

diff --git a/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi b/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi
index f5491a6..e2b5e7a 100644
--- a/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi
+++ b/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi

@@ -8,6 +8,10 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
+	aliases {
+		ethernet1 = &eth1;
+	};
+
 	connector {
 		compatible = "gpio-usb-b-connector", "usb-b-connector";
 		pinctrl-names = "default";
@@ -164,6 +168,38 @@
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		pcie@0,0 {
+			reg = <0x0000 0 0 0 0>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			pcie@4,0 {
+				reg = <0x2000 0 0 0 0>;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				eth1: ethernet@0,0 {
+					reg = <0x0000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
+					local-mac-address = [00 00 00 00 00 00];
+				};
+			};
+		};
+	};
 };
 
 /* GPS */
@@ -183,7 +219,7 @@
 
 	bluetooth {
 		compatible = "brcm,bcm4330-bt";
-		shutdown-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
 	};
 };
 

diff --git a/src/arm64/freescale/imx8mp-venice-gw74xx-imx219.dtso b/src/arm64/freescale/imx8mp-venice-gw74xx-imx219.dtso
index 270a911..edf22ff 100644
--- a/src/arm64/freescale/imx8mp-venice-gw74xx-imx219.dtso
+++ b/src/arm64/freescale/imx8mp-venice-gw74xx-imx219.dtso

@@ -62,12 +62,25 @@
 	status = "okay";
 
 	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		port@0 {
+			reg = <0>;
+
 			mipi_csi_0_in: endpoint {
 				remote-endpoint = <&imx219_to_mipi_csi2>;
 				data-lanes = <1 2>;
 			};
 		};
+
+		port@1 {
+			reg = <1>;
+
+			mipi_csi_0_out: endpoint {
+				remote-endpoint = <&isi_in_0>;
+			};
+		};
 	};
 };
 

diff --git a/src/arm64/freescale/imx8mp-venice-gw74xx.dts b/src/arm64/freescale/imx8mp-venice-gw74xx.dts
index cae586c..a77e9a4 100644
--- a/src/arm64/freescale/imx8mp-venice-gw74xx.dts
+++ b/src/arm64/freescale/imx8mp-venice-gw74xx.dts

@@ -404,6 +404,12 @@
 				label = "vdd_dram";
 			};
 
+			channel@9e {
+				gw,mode = <2>;
+				reg = <0x9e>;
+				label = "vdd_1p0";
+			};
+
 			channel@a2 {
 				gw,mode = <2>;
 				reg = <0xa2>;

diff --git a/src/arm64/freescale/imx8mp-verdin-dahlia.dtsi b/src/arm64/freescale/imx8mp-verdin-dahlia.dtsi
index 7e9e4b1..6e6b9c2 100644
--- a/src/arm64/freescale/imx8mp-verdin-dahlia.dtsi
+++ b/src/arm64/freescale/imx8mp-verdin-dahlia.dtsi

@@ -10,7 +10,7 @@
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&codec_dai>;
 		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,name = "imx8mp-wm8904";
+		simple-audio-card,name = "verdin-wm8904";
 		simple-audio-card,routing =
 			"Headphone Jack", "HPOUTL",
 			"Headphone Jack", "HPOUTR",
@@ -32,6 +32,25 @@
 			sound-dai = <&sai1>;
 		};
 	};
+
+	reg_usb_hub: regulator-usb-hub {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		regulator-name = "HUB_PWR_EN";
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		regulator-name = "PCIE_1_PWR_EN";
+		startup-delay-us = <100000>;
+	};
 };
 
 &backlight {
@@ -70,6 +89,11 @@
 	status = "okay";
 };
 
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
 /* Current measurement into module VCC */
 &hwmon {
 	status = "okay";
@@ -110,8 +134,14 @@
 	};
 };
 
+/* Verdin I2C_3_HDMI */
+&i2c5 {
+	status = "okay";
+};
+
 /* Verdin PCIE_1 */
 &pcie {
+	vpcie-supply = <&reg_pcie>;
 	status = "okay";
 };
 
@@ -138,6 +168,11 @@
 	vin-supply = <&reg_3p3v>;
 };
 
+/* We support turning off sleep moci on Dahlia */
+&reg_force_sleep_moci {
+	status = "disabled";
+};
+
 /* Verdin I2S_1 */
 &sai1 {
 	assigned-clocks = <&clk IMX8MP_CLK_SAI1>;
@@ -181,6 +216,25 @@
 	status = "okay";
 };
 
+&usb_dwc3_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	usb_hub_3_0: usb-hub@1 {
+		compatible = "usb424,5744";
+		reg = <1>;
+		peer-hub = <&usb_hub_2_0>;
+		vdd-supply = <&reg_usb_hub>;
+	};
+
+	usb_hub_2_0: usb-hub@2 {
+		compatible = "usb424,2744";
+		reg = <2>;
+		peer-hub = <&usb_hub_3_0>;
+		vdd-supply = <&reg_usb_hub>;
+	};
+};
+
 /* Verdin SD_1 */
 &usdhc2 {
 	status = "okay";

diff --git a/src/arm64/freescale/imx8mp-verdin-dev.dtsi b/src/arm64/freescale/imx8mp-verdin-dev.dtsi
index a509b2b..42ed44a 100644
--- a/src/arm64/freescale/imx8mp-verdin-dev.dtsi
+++ b/src/arm64/freescale/imx8mp-verdin-dev.dtsi

@@ -22,7 +22,7 @@
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&codec_dai>;
 		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,name = "imx8mp-nau8822";
+		simple-audio-card,name = "verdin-nau8822";
 		simple-audio-card,routing =
 			"Headphones", "LHP",
 			"Headphones", "RHP",
@@ -93,6 +93,11 @@
 	status = "okay";
 };
 
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
 &gpio_expander_21 {
 	status = "okay";
 	vcc-supply = <&reg_1p8v>;
@@ -131,6 +136,11 @@
 	};
 };
 
+/* Verdin I2C_3_HDMI */
+&i2c5 {
+	status = "okay";
+};
+
 /* Verdin PCIE_1 */
 &pcie {
 	status = "okay";

diff --git a/src/arm64/freescale/imx8mp-verdin-mallow.dtsi b/src/arm64/freescale/imx8mp-verdin-mallow.dtsi
index 8482393..1d15f74 100644
--- a/src/arm64/freescale/imx8mp-verdin-mallow.dtsi
+++ b/src/arm64/freescale/imx8mp-verdin-mallow.dtsi

@@ -112,6 +112,11 @@
 	status = "okay";
 };
 
+/* Verdin I2C_3_HDMI */
+&i2c5 {
+	status = "okay";
+};
+
 /* Verdin PCIE_1 */
 &pcie {
 	status = "okay";

diff --git a/src/arm64/freescale/imx8mp-verdin-yavia.dtsi b/src/arm64/freescale/imx8mp-verdin-yavia.dtsi
index db1722f..a7b261f 100644
--- a/src/arm64/freescale/imx8mp-verdin-yavia.dtsi
+++ b/src/arm64/freescale/imx8mp-verdin-yavia.dtsi

@@ -100,6 +100,11 @@
 	status = "okay";
 };
 
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
 &hwmon_temp {
 	status = "okay";
 };
@@ -117,6 +122,11 @@
 	status = "okay";
 };
 
+/* Verdin I2C_3_HDMI */
+&i2c5 {
+	status = "okay";
+};
+
 /* Verdin PCIE_1 */
 &pcie {
 	status = "okay";

diff --git a/src/arm64/freescale/imx8mp-verdin.dtsi b/src/arm64/freescale/imx8mp-verdin.dtsi
index faa17cb..aef4bef 100644
--- a/src/arm64/freescale/imx8mp-verdin.dtsi
+++ b/src/arm64/freescale/imx8mp-verdin.dtsi

@@ -116,6 +116,22 @@
 		vin-supply = <&reg_vdd_3v3>;
 	};
 
+	/*
+	 * By default we enable CTRL_SLEEP_MOCI#, this is required to have
+	 * peripherals on the carrier board powered.
+	 * If more granularity or power saving is required this can be disabled
+	 * in the carrier board device tree files.
+	 */
+	reg_force_sleep_moci: regulator-force-sleep-moci {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "CTRL_SLEEP_MOCI#";
+	};
+
 	reg_usb1_vbus: regulator-usb1-vbus {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -439,16 +455,6 @@
 			  "SODIMM_256",
 			  "SODIMM_48",
 			  "SODIMM_44";
-
-	ctrl-sleep-moci-hog {
-		gpio-hog;
-		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
-		gpios = <29 GPIO_ACTIVE_HIGH>;
-		line-name = "CTRL_SLEEP_MOCI#";
-		output-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
-	};
 };
 
 /* On-module I2C */
@@ -664,8 +670,6 @@
 	};
 };
 
-/* TODO: Verdin I2C_3_HDMI */
-
 /* Verdin I2C_4_CSI */
 &i2c3 {
 	clock-frequency = <400000>;
@@ -764,6 +768,16 @@
 	};
 };
 
+/* Verdin I2C_3_HDMI */
+&i2c5 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
 /* Verdin PCIE_1 */
 &pcie {
 	pinctrl-names = "default";
@@ -1106,8 +1120,6 @@
 	pinctrl_hdmi_hog: hdmihoggrp {
 		fsl,pins =
 			<MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC	0x40000019>,	/* SODIMM 63 */
-			<MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c3>,	/* SODIMM 59 */
-			<MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c3>,	/* SODIMM 57 */
 			<MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x40000019>;	/* SODIMM 61 */
 	};
 
@@ -1163,6 +1175,19 @@
 			<MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21		0x400001c6>;	/* SODIMM 12 */
 	};
 
+	/* Verdin I2C_3_HDMI */
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL		0x400001c6>,	/* SODIMM 59 */
+			<MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA		0x400001c6>;	/* SODIMM 57 */
+	};
+
+	pinctrl_i2c5_gpio: i2c5gpiogrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26		0x400001c6>,	/* SODIMM 59 */
+			<MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27		0x400001c6>;	/* SODIMM 57 */
+	};
+
 	/* Verdin I2S_2_BCLK (TOUCH_RESET#) */
 	pinctrl_i2s_2_bclk_touch_reset: i2s2bclktouchresetgrp {
 		fsl,pins =

diff --git a/src/arm64/freescale/imx8mp.dtsi b/src/arm64/freescale/imx8mp.dtsi
index 8141926..b92abb5 100644
--- a/src/arm64/freescale/imx8mp.dtsi
+++ b/src/arm64/freescale/imx8mp.dtsi

@@ -836,6 +836,23 @@
 							 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
 					};
 
+					pgc_hdmimix: power-domain@14 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_HDMIMIX>;
+						clocks = <&clk IMX8MP_CLK_HDMI_ROOT>,
+							 <&clk IMX8MP_CLK_HDMI_APB>;
+						assigned-clocks = <&clk IMX8MP_CLK_HDMI_AXI>,
+								  <&clk IMX8MP_CLK_HDMI_APB>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>,
+									 <&clk IMX8MP_SYS_PLL1_133M>;
+						assigned-clock-rates = <500000000>, <133000000>;
+					};
+
+					pgc_hdmi_phy: power-domain@15 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_HDMI_PHY>;
+					};
+
 					pgc_mipi_phy2: power-domain@16 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY2>;
@@ -1513,6 +1530,16 @@
 					status = "disabled";
 				};
 
+				aud2htx: aud2htx@30cb0000 {
+					compatible = "fsl,imx8mp-aud2htx";
+					reg = <0x30cb0000 0x10000>;
+					interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_AUD2HTX_IPG>;
+					clock-names = "bus";
+					dmas = <&sdma2 26 2 0>;
+					dma-names = "tx";
+					status = "disabled";
+				};
 			};
 
 			sdma3: dma-controller@30e00000 {
@@ -1630,7 +1657,7 @@
 				compatible = "fsl,imx8mp-mipi-csi2", "fsl,imx8mm-mipi-csi2";
 				reg = <0x32e40000 0x10000>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <500000000>;
+				clock-frequency = <266000000>;
 				clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>,
@@ -1640,7 +1667,7 @@
 						  <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
 				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
 							 <&clk IMX8MP_CLK_24M>;
-				assigned-clock-rates = <500000000>;
+				assigned-clock-rates = <266000000>;
 				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
 				status = "disabled";
 
@@ -1725,6 +1752,13 @@
 							remote-endpoint = <&lcdif1_to_dsim>;
 						};
 					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_dsi_out: endpoint {
+						};
+					};
 				};
 			};
 
@@ -1889,6 +1923,136 @@
 				#power-domain-cells = <1>;
 				#clock-cells = <0>;
 			};
+
+			hdmi_blk_ctrl: blk-ctrl@32fc0000 {
+				compatible = "fsl,imx8mp-hdmi-blk-ctrl", "syscon";
+				reg = <0x32fc0000 0x1000>;
+				clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+					 <&clk IMX8MP_CLK_HDMI_ROOT>,
+					 <&clk IMX8MP_CLK_HDMI_REF_266M>,
+					 <&clk IMX8MP_CLK_HDMI_24M>,
+					 <&clk IMX8MP_CLK_HDMI_FDCC_TST>;
+				clock-names = "apb", "axi", "ref_266m", "ref_24m", "fdcc";
+				power-domains = <&pgc_hdmimix>, <&pgc_hdmimix>,
+						<&pgc_hdmimix>, <&pgc_hdmimix>,
+						<&pgc_hdmimix>, <&pgc_hdmimix>,
+						<&pgc_hdmimix>, <&pgc_hdmi_phy>,
+						<&pgc_hdmimix>, <&pgc_hdmimix>;
+				power-domain-names = "bus", "irqsteer", "lcdif",
+						     "pai", "pvi", "trng",
+						     "hdmi-tx", "hdmi-tx-phy",
+						     "hdcp", "hrv";
+				#power-domain-cells = <1>;
+			};
+
+			irqsteer_hdmi: interrupt-controller@32fc2000 {
+				compatible = "fsl,imx-irqsteer";
+				reg = <0x32fc2000 0x1000>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				fsl,channel = <1>;
+				fsl,num-irqs = <64>;
+				clocks = <&clk IMX8MP_CLK_HDMI_APB>;
+				clock-names = "ipg";
+				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_IRQSTEER>;
+			};
+
+			hdmi_pvi: display-bridge@32fc4000 {
+				compatible = "fsl,imx8mp-hdmi-pvi";
+				reg = <0x32fc4000 0x1000>;
+				interrupt-parent = <&irqsteer_hdmi>;
+				interrupts = <12>;
+				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						pvi_from_lcdif3: endpoint {
+							remote-endpoint = <&lcdif3_to_pvi>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						pvi_to_hdmi_tx: endpoint {
+							remote-endpoint = <&hdmi_tx_from_pvi>;
+						};
+					};
+				};
+			};
+
+			lcdif3: display-controller@32fc6000 {
+				compatible = "fsl,imx8mp-lcdif";
+				reg = <0x32fc6000 0x1000>;
+				interrupt-parent = <&irqsteer_hdmi>;
+				interrupts = <8>;
+				clocks = <&hdmi_tx_phy>,
+					 <&clk IMX8MP_CLK_HDMI_APB>,
+					 <&clk IMX8MP_CLK_HDMI_ROOT>;
+				clock-names = "pix", "axi", "disp_axi";
+				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_LCDIF>;
+				status = "disabled";
+
+				port {
+					lcdif3_to_pvi: endpoint {
+						remote-endpoint = <&pvi_from_lcdif3>;
+					};
+				};
+			};
+
+			hdmi_tx: hdmi@32fd8000 {
+				compatible = "fsl,imx8mp-hdmi-tx";
+				reg = <0x32fd8000 0x7eff>;
+				interrupt-parent = <&irqsteer_hdmi>;
+				interrupts = <0>;
+				clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+					 <&clk IMX8MP_CLK_HDMI_REF_266M>,
+					 <&clk IMX8MP_CLK_32K>,
+					 <&hdmi_tx_phy>;
+				clock-names = "iahb", "isfr", "cec", "pix";
+				assigned-clocks = <&clk IMX8MP_CLK_HDMI_REF_266M>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>;
+				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>;
+				reg-io-width = <1>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						hdmi_tx_from_pvi: endpoint {
+							remote-endpoint = <&pvi_to_hdmi_tx>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						/* Point endpoint to the HDMI connector */
+					};
+				};
+			};
+
+			hdmi_tx_phy: phy@32fdff00 {
+				compatible = "fsl,imx8mp-hdmi-phy";
+				reg = <0x32fdff00 0x100>;
+				clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+					 <&clk IMX8MP_CLK_HDMI_24M>;
+				clock-names = "apb", "ref";
+				assigned-clocks = <&clk IMX8MP_CLK_HDMI_24M>;
+				assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX_PHY>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		pcie: pcie@33800000 {

diff --git a/src/arm64/freescale/imx8mq-hummingboard-pulse.dts b/src/arm64/freescale/imx8mq-hummingboard-pulse.dts
index 366693f..e92b5d5 100644
--- a/src/arm64/freescale/imx8mq-hummingboard-pulse.dts
+++ b/src/arm64/freescale/imx8mq-hummingboard-pulse.dts

@@ -42,7 +42,7 @@
 	status = "okay";
 
 	typec_ptn5100: usb-typec@50 {
-		compatible = "nxp,ptn5110";
+		compatible = "nxp,ptn5110", "tcpci";
 		reg = <0x50>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec>;

diff --git a/src/arm64/freescale/imx8mq-librem5-devkit.dts b/src/arm64/freescale/imx8mq-librem5-devkit.dts
index 8055a2c..b268ba7 100644
--- a/src/arm64/freescale/imx8mq-librem5-devkit.dts
+++ b/src/arm64/freescale/imx8mq-librem5-devkit.dts

@@ -429,7 +429,7 @@
 	};
 
 	typec_ptn5100: usb-typec@52 {
-		compatible = "nxp,ptn5110";
+		compatible = "nxp,ptn5110", "tcpci";
 		reg = <0x52>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec>;

diff --git a/src/arm64/freescale/imx8mq.dtsi b/src/arm64/freescale/imx8mq.dtsi
index c6dc3ba..e03186b 100644
--- a/src/arm64/freescale/imx8mq.dtsi
+++ b/src/arm64/freescale/imx8mq.dtsi

@@ -1290,6 +1290,13 @@
 							remote-endpoint = <&lcdif_mipi_dsi>;
 						};
 					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_dsi_out: endpoint {
+						};
+					};
 				};
 			};
 

diff --git a/src/arm64/freescale/imx8qm-mek.dts b/src/arm64/freescale/imx8qm-mek.dts
index 77ac0ef..6e05361 100644
--- a/src/arm64/freescale/imx8qm-mek.dts
+++ b/src/arm64/freescale/imx8qm-mek.dts

@@ -36,9 +36,23 @@
 		regulator-name = "SD1_SPWR";
 		regulator-min-microvolt = <3000000>;
 		regulator-max-microvolt = <3000000>;
-		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		gpio = <&lsio_gpio4 7 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0>;
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
 };
 
 &i2c1 {
@@ -71,6 +85,37 @@
 	status = "okay";
 };
 
+&lpspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi2 &pinctrl_lpspi2_cs>;
+	cs-gpios = <&lsio_gpio3 10 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	spidev0: spi@0 {
+		reg = <0>;
+		compatible = "rohm,dh2228fv";
+		spi-max-frequency = <30000000>;
+	};
+};
+
+&flexspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <133000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+	};
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
@@ -130,6 +175,12 @@
 		>;
 	};
 
+	pinctrl_adc0: adc0grp {
+		fsl,pins = <
+			IMX8QM_ADC_IN0_DMA_ADC0_IN0				0xc0000060
+		>;
+	};
+
 	pinctrl_fec1: fec1grp {
 		fsl,pins = <
 			IMX8QM_ENET0_MDC_CONN_ENET0_MDC				0x06000020
@@ -149,6 +200,41 @@
 		>;
 	};
 
+	pinctrl_lpspi2: lpspi2grp {
+		fsl,pins = <
+			IMX8QM_SPI2_SCK_DMA_SPI2_SCK		0x06000040
+			IMX8QM_SPI2_SDO_DMA_SPI2_SDO		0x06000040
+			IMX8QM_SPI2_SDI_DMA_SPI2_SDI		0x06000040
+		>;
+	};
+
+	pinctrl_lpspi2_cs: lpspi2csgrp {
+		fsl,pins = <
+			IMX8QM_SPI2_CS0_LSIO_GPIO3_IO10		0x21
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			IMX8QM_QSPI0A_DATA0_LSIO_QSPI0A_DATA0     0x06000021
+			IMX8QM_QSPI0A_DATA1_LSIO_QSPI0A_DATA1     0x06000021
+			IMX8QM_QSPI0A_DATA2_LSIO_QSPI0A_DATA2     0x06000021
+			IMX8QM_QSPI0A_DATA3_LSIO_QSPI0A_DATA3     0x06000021
+			IMX8QM_QSPI0A_DQS_LSIO_QSPI0A_DQS         0x06000021
+			IMX8QM_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B     0x06000021
+			IMX8QM_QSPI0A_SS1_B_LSIO_QSPI0A_SS1_B     0x06000021
+			IMX8QM_QSPI0A_SCLK_LSIO_QSPI0A_SCLK       0x06000021
+			IMX8QM_QSPI0B_SCLK_LSIO_QSPI0B_SCLK       0x06000021
+			IMX8QM_QSPI0B_DATA0_LSIO_QSPI0B_DATA0     0x06000021
+			IMX8QM_QSPI0B_DATA1_LSIO_QSPI0B_DATA1     0x06000021
+			IMX8QM_QSPI0B_DATA2_LSIO_QSPI0B_DATA2     0x06000021
+			IMX8QM_QSPI0B_DATA3_LSIO_QSPI0B_DATA3     0x06000021
+			IMX8QM_QSPI0B_DQS_LSIO_QSPI0B_DQS         0x06000021
+			IMX8QM_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B     0x06000021
+			IMX8QM_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B     0x06000021
+		>;
+	};
+
 	pinctrl_lpuart0: lpuart0grp {
 		fsl,pins = <
 			IMX8QM_UART0_RX_DMA_UART0_RX				0x06000020

diff --git a/src/arm64/freescale/imx8qxp-mek.dts b/src/arm64/freescale/imx8qxp-mek.dts
index 8360bb8..cee13e5 100644
--- a/src/arm64/freescale/imx8qxp-mek.dts
+++ b/src/arm64/freescale/imx8qxp-mek.dts

@@ -44,6 +44,22 @@
 			};
 		};
 	};
+
+	sound-wm8960 {
+		compatible = "fsl,imx-audio-wm8960";
+		model = "wm8960-audio";
+		audio-cpu = <&sai1>;
+		audio-codec = <&wm8960>;
+		hp-det-gpio = <&lsio_gpio1 0 GPIO_ACTIVE_HIGH>;
+		audio-routing = "Headphone Jack", "HP_L",
+				"Headphone Jack", "HP_R",
+				"Ext Spk", "SPK_LP",
+				"Ext Spk", "SPK_LN",
+				"Ext Spk", "SPK_RP",
+				"Ext Spk", "SPK_RN",
+				"LINPUT1", "Mic Jack",
+				"Mic Jack", "MICB";
+	};
 };
 
 &dsp {
@@ -149,7 +165,7 @@
 	};
 
 	ptn5110: tcpc@50 {
-		compatible = "nxp,ptn5110";
+		compatible = "nxp,ptn5110", "tcpci";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec>;
 		reg = <0x50>;
@@ -186,8 +202,49 @@
 		};
 	};
 
+};
+
+&cm40_i2c {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_cm40_i2c>;
+	pinctrl-1 = <&pinctrl_cm40_i2c_gpio>;
+	scl-gpios = <&lsio_gpio1 10 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&lsio_gpio1 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	wm8960: audio-codec@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "mclk";
+		assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+				  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		assigned-clock-rates = <786432000>,
+				       <49152000>,
+				       <12288000>,
+				       <12288000>;
+		wlf,shared-lrclk;
+		wlf,hp-cfg = <2 2 3>;
+		wlf,gpio-cfg = <1 3>;
+	};
+
+	pca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
 
+&cm40_intmux {
+	status = "okay";
+};
+
 &lpuart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lpuart0>;
@@ -218,6 +275,53 @@
 	status = "okay";
 };
 
+&sai0 {
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai0_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai0>;
+	status = "okay";
+};
+
+&sai1 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai1_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&sai4 {
+	assigned-clocks = <&acm IMX_ADMA_ACM_SAI4_MCLK_SEL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai4_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-parents = <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <0>, <786432000>, <98304000>, <12288000>, <98304000>;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
+&sai5 {
+	assigned-clocks = <&acm IMX_ADMA_ACM_SAI5_MCLK_SEL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai5_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-parents = <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <0>, <786432000>, <98304000>, <12288000>, <98304000>;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
 &thermal_zones {
 	pmic-thermal {
 		polling-delay-passive = <250>;
@@ -314,6 +418,21 @@
 };
 
 &iomuxc {
+
+	pinctrl_cm40_i2c: cm40i2cgrp {
+		fsl,pins = <
+			IMX8QXP_ADC_IN1_M40_I2C0_SDA                            0x0600004c
+			IMX8QXP_ADC_IN0_M40_I2C0_SCL                            0x0600004c
+		>;
+	};
+
+	pinctrl_cm40_i2c_gpio: cm40i2cgpio-grp {
+		fsl,pins = <
+			IMX8QXP_ADC_IN1_LSIO_GPIO1_IO09				0xc600004c
+			IMX8QXP_ADC_IN0_LSIO_GPIO1_IO10				0xc600004c
+		>;
+	};
+
 	pinctrl_fec1: fec1grp {
 		fsl,pins = <
 			IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000020
@@ -385,6 +504,25 @@
 		>;
 	};
 
+	pinctrl_sai0: sai0grp {
+		fsl,pins = <
+			IMX8QXP_SAI0_TXD_ADMA_SAI0_TXD		0x06000060
+			IMX8QXP_SAI0_RXD_ADMA_SAI0_RXD		0x06000040
+			IMX8QXP_SAI0_TXC_ADMA_SAI0_TXC		0x06000040
+			IMX8QXP_SAI0_TXFS_ADMA_SAI0_TXFS	0x06000040
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			IMX8QXP_SAI1_RXD_ADMA_SAI1_RXD     0x06000040
+			IMX8QXP_SAI1_RXC_ADMA_SAI1_TXC     0x06000040
+			IMX8QXP_SAI1_RXFS_ADMA_SAI1_TXFS   0x06000040
+			IMX8QXP_SPI0_CS1_ADMA_SAI1_TXD     0x06000060
+			IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00   0x06000040
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041

diff --git a/src/arm64/freescale/imx8qxp.dtsi b/src/arm64/freescale/imx8qxp.dtsi
index 10e16d8..0313f29 100644
--- a/src/arm64/freescale/imx8qxp.dtsi
+++ b/src/arm64/freescale/imx8qxp.dtsi

@@ -317,6 +317,7 @@
 	/* sorted in register address */
 	#include "imx8-ss-img.dtsi"
 	#include "imx8-ss-vpu.dtsi"
+	#include "imx8-ss-cm40.dtsi"
 	#include "imx8-ss-gpu0.dtsi"
 	#include "imx8-ss-adma.dtsi"
 	#include "imx8-ss-conn.dtsi"

diff --git a/src/arm64/freescale/imx8ulp-evk.dts b/src/arm64/freescale/imx8ulp-evk.dts
index 24bb253..e937e5f 100644
--- a/src/arm64/freescale/imx8ulp-evk.dts
+++ b/src/arm64/freescale/imx8ulp-evk.dts

@@ -127,14 +127,72 @@
 	pinctrl-1 = <&pinctrl_lpi2c7>;
 	status = "okay";
 
+	ptn5150_1: typec@1d {
+		compatible = "nxp,ptn5150";
+		reg = <0x1d>;
+		int-gpios = <&gpiof 3 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec1>;
+		status = "disabled";
+	};
+
 	pcal6408: gpio@21 {
 		compatible = "nxp,pcal9554b";
 		reg = <0x21>;
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	ptn5150_2: typec@3d {
+		compatible = "nxp,ptn5150";
+		reg = <0x3d>;
+		int-gpios = <&gpiof 5 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec2>;
+		status = "disabled";
+	};
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	over-current-active-low;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <110>;
+	status = "okay";
+};
+
+&usbmisc1 {
+	status = "okay";
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb2>;
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	over-current-active-low;
+	status = "okay";
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <110>;
+	status = "okay";
 };
 
+&usbmisc2 {
+	status = "okay";
+};
+
 &usdhc0 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
 	pinctrl-0 = <&pinctrl_usdhc0>;
@@ -224,6 +282,32 @@
 		>;
 	};
 
+	pinctrl_typec1: typec1grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTF3__PTF3           0x3
+		>;
+	};
+
+	pinctrl_typec2: typec2grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTF5__PTF5           0x3
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTF2__USB0_ID	0x10003
+			MX8ULP_PAD_PTF4__USB0_OC	0x10003
+		>;
+	};
+
+	pinctrl_usb2: usb2grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTD23__USB1_ID	0x10003
+			MX8ULP_PAD_PTF6__USB1_OC	0x10003
+		>;
+	};
+
 	pinctrl_usdhc0: usdhc0grp {
 		fsl,pins = <
 			MX8ULP_PAD_PTD1__SDHC0_CMD	0x3

diff --git a/src/arm64/freescale/imx8ulp.dtsi b/src/arm64/freescale/imx8ulp.dtsi
index c4a0082..e32d5af 100644
--- a/src/arm64/freescale/imx8ulp.dtsi
+++ b/src/arm64/freescale/imx8ulp.dtsi

@@ -252,6 +252,38 @@
 				#reset-cells = <1>;
 			};
 
+			crypto: crypto@292e0000 {
+				compatible = "fsl,sec-v4.0";
+				reg = <0x292e0000 0x10000>;
+				ranges = <0 0x292e0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr3: jr@4000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x4000 0x1000>;
+					interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
 			tpm5: tpm@29340000 {
 				compatible = "fsl,imx8ulp-tpm", "fsl,imx7ulp-tpm";
 				reg = <0x29340000 0x1000>;
@@ -472,6 +504,68 @@
 				status = "disabled";
 			};
 
+			usbotg1: usb@29900000 {
+				compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
+				reg = <0x29900000 0x200>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_USB0>;
+				power-domains = <&scmi_devpd IMX8ULP_PD_USB0>;
+				phys = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x8>;
+				rx-burst-size-dword = <0x8>;
+				status = "disabled";
+			};
+
+			usbmisc1: usbmisc@29900200 {
+				compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7d-usbmisc",
+					     "fsl,imx6q-usbmisc";
+				reg = <0x29900200 0x200>;
+				#index-cells = <1>;
+				status = "disabled";
+			};
+
+			usbphy1: usb-phy@29910000 {
+				compatible = "fsl,imx8ulp-usbphy", "fsl,imx7ulp-usbphy";
+				reg = <0x29910000 0x10000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_USB0_PHY>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@29920000 {
+				compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
+				reg = <0x29920000 0x200>;
+				interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_USB1>;
+				power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>;
+				phys = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc2 0>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x8>;
+				rx-burst-size-dword = <0x8>;
+				status = "disabled";
+			};
+
+			usbmisc2: usbmisc@29920200 {
+				compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7d-usbmisc",
+					     "fsl,imx6q-usbmisc";
+				reg = <0x29920200 0x200>;
+				#index-cells = <1>;
+				status = "disabled";
+			};
+
+			usbphy2: usb-phy@29930000 {
+				compatible = "fsl,imx8ulp-usbphy", "fsl,imx7ulp-usbphy";
+				reg = <0x29930000 0x10000>;
+				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_USB1_PHY>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
 			fec: ethernet@29950000 {
 				compatible = "fsl,imx8ulp-fec", "fsl,imx6ul-fec", "fsl,imx6q-fec";
 				reg = <0x29950000 0x10000>;

diff --git a/src/arm64/freescale/imx93-11x11-evk.dts b/src/arm64/freescale/imx93-11x11-evk.dts
index 9921ea1..bd98eff 100644
--- a/src/arm64/freescale/imx93-11x11-evk.dts
+++ b/src/arm64/freescale/imx93-11x11-evk.dts

@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/usb/pd.h>
 #include "imx93.dtsi"
 
 / {
@@ -38,7 +39,7 @@
 			no-map;
 		};
 
-		vdev1vring0: vdev1vring0@a4000000 {
+		vdev1vring0: vdev1vring0@a4010000 {
 			reg = <0 0xa4010000 0 0x8000>;
 			no-map;
 		};
@@ -48,8 +49,8 @@
 			no-map;
 		};
 
-		rsc_table: rsc-table@2021f000 {
-			reg = <0 0x2021f000 0 0x1000>;
+		rsc_table: rsc-table@2021e000 {
+			reg = <0 0x2021e000 0 0x1000>;
 			no-map;
 		};
 
@@ -104,9 +105,85 @@
 	status = "okay";
 };
 
-&eqos {
+&lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec1_dr_sw: endpoint {
+						remote-endpoint = <&usb1_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+
+	ptn5110_2: tcpc@51 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x51>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+		typec2_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec2_dr_sw: endpoint {
+						remote-endpoint = <&usb2_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&eqos {
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-1 = <&pinctrl_eqos_sleep>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy1>;
 	status = "okay";
@@ -120,13 +197,17 @@
 		ethphy1: ethernet-phy@1 {
 			reg = <1>;
 			eee-broken-1000t;
+			reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
 		};
 	};
 };
 
 &fec {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-1 = <&pinctrl_fec_sleep>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy2>;
 	fsl,magic-packet;
@@ -140,6 +221,9 @@
 		ethphy2: ethernet-phy@2 {
 			reg = <2>;
 			eee-broken-1000t;
+			reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
 		};
 	};
 };
@@ -154,33 +238,181 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart5>;
 	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		usb2_drd_sw: endpoint {
+			remote-endpoint = <&typec2_dr_sw>;
+		};
+	};
 };
 
 &usdhc1 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1>;
-	pinctrl-2 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
 };
 
 &usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
 	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
 	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
 	bus-width = <4>;
 	status = "okay";
-	no-sdio;
 	no-mmc;
 };
 
 &wdog3 {
 	status = "okay";
+};
+
+&lpi2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-1 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	pcal6524: gpio@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6524>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <610000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <670000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4{
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5{
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1060000>;
+				regulator-max-microvolt = <1140000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <840000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	pcf2131: rtc@53 {
+		compatible = "nxp,pcf2131";
+		reg = <0x53>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+	};
 };
 
 &iomuxc {
@@ -203,6 +435,25 @@
 		>;
 	};
 
+	pinctrl_eqos_sleep: eqossleepgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_MDC__GPIO4_IO00				0x31e
+			MX93_PAD_ENET1_MDIO__GPIO4_IO01				0x31e
+			MX93_PAD_ENET1_RD0__GPIO4_IO10                          0x31e
+			MX93_PAD_ENET1_RD1__GPIO4_IO11				0x31e
+			MX93_PAD_ENET1_RD2__GPIO4_IO12				0x31e
+			MX93_PAD_ENET1_RD3__GPIO4_IO13				0x31e
+			MX93_PAD_ENET1_RXC__GPIO4_IO09                          0x31e
+			MX93_PAD_ENET1_RX_CTL__GPIO4_IO08			0x31e
+			MX93_PAD_ENET1_TD0__GPIO4_IO05                          0x31e
+			MX93_PAD_ENET1_TD1__GPIO4_IO04                          0x31e
+			MX93_PAD_ENET1_TD2__GPIO4_IO03				0x31e
+			MX93_PAD_ENET1_TD3__GPIO4_IO02				0x31e
+			MX93_PAD_ENET1_TXC__GPIO4_IO07                          0x31e
+			MX93_PAD_ENET1_TX_CTL__GPIO4_IO06                       0x31e
+		>;
+	};
+
 	pinctrl_fec: fecgrp {
 		fsl,pins = <
 			MX93_PAD_ENET2_MDC__ENET1_MDC			0x57e
@@ -222,6 +473,32 @@
 		>;
 	};
 
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO28__LPI2C3_SDA			0x40000b9e
+			MX93_PAD_GPIO_IO29__LPI2C3_SCL			0x40000b9e
+		>;
+	};
+
+	pinctrl_fec_sleep: fecsleepgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_MDC__GPIO4_IO14			0x51e
+			MX93_PAD_ENET2_MDIO__GPIO4_IO15			0x51e
+			MX93_PAD_ENET2_RD0__GPIO4_IO24			0x51e
+			MX93_PAD_ENET2_RD1__GPIO4_IO25			0x51e
+			MX93_PAD_ENET2_RD2__GPIO4_IO26			0x51e
+			MX93_PAD_ENET2_RD3__GPIO4_IO27			0x51e
+			MX93_PAD_ENET2_RXC__GPIO4_IO23                  0x51e
+			MX93_PAD_ENET2_RX_CTL__GPIO4_IO22		0x51e
+			MX93_PAD_ENET2_TD0__GPIO4_IO19			0x51e
+			MX93_PAD_ENET2_TD1__GPIO4_IO18			0x51e
+			MX93_PAD_ENET2_TD2__GPIO4_IO17			0x51e
+			MX93_PAD_ENET2_TD3__GPIO4_IO16			0x51e
+			MX93_PAD_ENET2_TXC__GPIO4_IO21                  0x51e
+			MX93_PAD_ENET2_TX_CTL__GPIO4_IO20               0x51e
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
@@ -238,9 +515,63 @@
 		>;
 	};
 
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__LPI2C2_SCL			0x40000b9e
+			MX93_PAD_I2C2_SDA__LPI2C2_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO28__LPI2C3_SDA			0x40000b9e
+			MX93_PAD_GPIO_IO29__LPI2C3_SCL			0x40000b9e
+		>;
+	};
+
+	pinctrl_pcal6524: pcal6524grp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27			0x31e
+		>;
+	};
+
 	/* need to config the SION for data and cmd pad, refer to ERR052021 */
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x1582
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x40001382
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x40001382
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x40001382
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x40001382
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x40001382
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x40001382
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x40001382
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x40001382
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x40001382
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x1582
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x158e
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x4000138e
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000138e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x4000138e
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x4000138e
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x4000138e
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x4000138e
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x4000138e
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x4000138e
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x4000138e
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x158e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
 			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
 			MX93_PAD_SD1_CMD__USDHC1_CMD		0x400013fe
 			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x400013fe
@@ -267,9 +598,41 @@
 		>;
 	};
 
+	pinctrl_usdhc2_gpio_sleep: usdhc2gpiosleepgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x51e
+		>;
+	};
+
 	/* need to config the SION for data and cmd pad, refer to ERR052021 */
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x1582
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x40001382
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x40001382
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x40001382
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x40001382
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x40001382
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x158e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000138e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000138e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
 			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
 			MX93_PAD_SD2_CMD__USDHC2_CMD		0x400013fe
 			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x400013fe
@@ -279,4 +642,17 @@
 			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
 		>;
 	};
+
+	pinctrl_usdhc2_sleep: usdhc2sleepgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__GPIO3_IO01            0x51e
+			MX93_PAD_SD2_CMD__GPIO3_IO02		0x51e
+			MX93_PAD_SD2_DATA0__GPIO3_IO03		0x51e
+			MX93_PAD_SD2_DATA1__GPIO3_IO04		0x51e
+			MX93_PAD_SD2_DATA2__GPIO3_IO05		0x51e
+			MX93_PAD_SD2_DATA3__GPIO3_IO06		0x51e
+			MX93_PAD_SD2_VSELECT__GPIO3_IO19	0x51e
+		>;
+	};
+
 };

diff --git a/src/arm64/freescale/imx93.dtsi b/src/arm64/freescale/imx93.dtsi
index 601c94e..4a3f423 100644
--- a/src/arm64/freescale/imx93.dtsi
+++ b/src/arm64/freescale/imx93.dtsi

@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/clock/imx93-clock.h>
+#include <dt-bindings/dma/fsl-edma.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -183,6 +184,20 @@
 		status = "disabled";
 	};
 
+	usbphynop1: usbphynop1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+		clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
+		clock-names = "main_clk";
+	};
+
+	usbphynop2: usbphynop2 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+		clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
+		clock-names = "main_clk";
+	};
+
 	soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -316,6 +331,8 @@
 				clocks = <&clk IMX93_CLK_LPI2C1_GATE>,
 					 <&clk IMX93_CLK_BUS_AON>;
 				clock-names = "per", "ipg";
+				dmas = <&edma1 7 0 0>, <&edma1 8 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -328,6 +345,8 @@
 				clocks = <&clk IMX93_CLK_LPI2C2_GATE>,
 					 <&clk IMX93_CLK_BUS_AON>;
 				clock-names = "per", "ipg";
+				dmas = <&edma1 9 0 0>, <&edma1 10 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -340,6 +359,8 @@
 				clocks = <&clk IMX93_CLK_LPSPI1_GATE>,
 					 <&clk IMX93_CLK_BUS_AON>;
 				clock-names = "per", "ipg";
+				dmas = <&edma1 11 0 0>, <&edma1 12 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -352,6 +373,8 @@
 				clocks = <&clk IMX93_CLK_LPSPI2_GATE>,
 					 <&clk IMX93_CLK_BUS_AON>;
 				clock-names = "per", "ipg";
+				dmas = <&edma1 13 0 0>, <&edma1 14 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -361,7 +384,7 @@
 				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART1_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma1 17 0 1>, <&edma1 16 0 0>;
+				dmas = <&edma1 17 0 FSL_EDMA_RX>, <&edma1 16 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -372,7 +395,7 @@
 				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART2_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma1 19 0 1>, <&edma1 18 0 0>;
+				dmas = <&edma1 19 0 FSL_EDMA_RX>, <&edma1 18 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -400,7 +423,7 @@
 					 <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
 					 <&clk IMX93_CLK_DUMMY>;
 				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
-				dmas = <&edma1 22 0 1>, <&edma1 21 0 0>;
+				dmas = <&edma1 22 0 FSL_EDMA_RX>, <&edma1 21 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -509,8 +532,7 @@
 				reg = <0x44530000 0x10000>;
 				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+					     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_ADC1_GATE>;
 				clock-names = "ipg";
 				#io-channel-cells = <1>;
@@ -693,6 +715,8 @@
 				clocks = <&clk IMX93_CLK_LPI2C3_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
 				clock-names = "per", "ipg";
+				dmas = <&edma2 8 0 0>, <&edma2 9 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -705,6 +729,8 @@
 				clocks = <&clk IMX93_CLK_LPI2C4_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
 				clock-names = "per", "ipg";
+				dmas = <&edma2 10 0 0>, <&edma2 11 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -717,6 +743,8 @@
 				clocks = <&clk IMX93_CLK_LPSPI3_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
 				clock-names = "per", "ipg";
+				dmas = <&edma2 12 0 0>, <&edma2 13 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -729,6 +757,8 @@
 				clocks = <&clk IMX93_CLK_LPSPI4_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
 				clock-names = "per", "ipg";
+				dmas = <&edma2 14 0 0>, <&edma2 15 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -738,7 +768,7 @@
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART3_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 18 0 1>, <&edma2 17 0 0>;
+				dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 17 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -749,7 +779,7 @@
 				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART4_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 20 0 1>, <&edma2 19 0 0>;
+				dmas = <&edma2 20 0 FSL_EDMA_RX>, <&edma2 19 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -760,7 +790,7 @@
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART5_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 22 0 1>, <&edma2 21 0 0>;
+				dmas = <&edma2 22 0 FSL_EDMA_RX>, <&edma2 21 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -771,7 +801,7 @@
 				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART6_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 24 0 1>, <&edma2 23 0 0>;
+				dmas = <&edma2 24 0 FSL_EDMA_RX>, <&edma2 23 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -814,7 +844,7 @@
 					 <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>,
 					 <&clk IMX93_CLK_DUMMY>;
 				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
-				dmas = <&edma2 59 0 1>, <&edma2 58 0 0>;
+				dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -827,7 +857,7 @@
 					 <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>,
 					 <&clk IMX93_CLK_DUMMY>;
 				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
-				dmas = <&edma2 61 0 1>, <&edma2 60 0 0>;
+				dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -846,7 +876,7 @@
 					 <&clk IMX93_CLK_DUMMY>,
 					 <&clk IMX93_CLK_AUD_XCVR_GATE>;
 				clock-names = "ipg", "phy", "spba", "pll_ipg";
-				dmas = <&edma2 65 0 1>, <&edma2 66 0 0>;
+				dmas = <&edma2 65 0 FSL_EDMA_RX>, <&edma2 66 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -857,7 +887,7 @@
 				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART7_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 88 0 1>, <&edma2 87 0 0>;
+				dmas = <&edma2 88 0 FSL_EDMA_RX>, <&edma2 87 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -868,7 +898,7 @@
 				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART8_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 90 0 1>, <&edma2 89 0 0>;
+				dmas = <&edma2 90 0 FSL_EDMA_RX>, <&edma2 89 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -882,6 +912,8 @@
 				clocks = <&clk IMX93_CLK_LPI2C5_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
 				clock-names = "per", "ipg";
+				dmas = <&edma2 71 0 0>, <&edma2 72 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -894,6 +926,8 @@
 				clocks = <&clk IMX93_CLK_LPI2C6_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
 				clock-names = "per", "ipg";
+				dmas = <&edma2 73 0 0>, <&edma2 74 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -906,6 +940,8 @@
 				clocks = <&clk IMX93_CLK_LPI2C7_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
 				clock-names = "per", "ipg";
+				dmas = <&edma2 75 0 0>, <&edma2 76 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -918,6 +954,8 @@
 				clocks = <&clk IMX93_CLK_LPI2C8_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
 				clock-names = "per", "ipg";
+				dmas = <&edma2 77 0 0>, <&edma2 78 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -930,6 +968,8 @@
 				clocks = <&clk IMX93_CLK_LPSPI5_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
 				clock-names = "per", "ipg";
+				dmas = <&edma2 79 0 0>, <&edma2 80 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -942,6 +982,8 @@
 				clocks = <&clk IMX93_CLK_LPSPI6_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
 				clock-names = "per", "ipg";
+				dmas = <&edma2 81 0 0>, <&edma2 82 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -954,6 +996,8 @@
 				clocks = <&clk IMX93_CLK_LPSPI7_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
 				clock-names = "per", "ipg";
+				dmas = <&edma2 83 0 0>, <&edma2 84 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -966,6 +1010,8 @@
 				clocks = <&clk IMX93_CLK_LPSPI8_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
 				clock-names = "per", "ipg";
+				dmas = <&edma2 85 0 0>, <&edma2 86 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -986,6 +1032,9 @@
 					 <&clk IMX93_CLK_WAKEUP_AXI>,
 					 <&clk IMX93_CLK_USDHC1_GATE>;
 				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX93_CLK_USDHC1>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				assigned-clock-rates = <400000000>;
 				bus-width = <8>;
 				fsl,tuning-start-tap = <1>;
 				fsl,tuning-step = <2>;
@@ -1000,6 +1049,9 @@
 					 <&clk IMX93_CLK_WAKEUP_AXI>,
 					 <&clk IMX93_CLK_USDHC2_GATE>;
 				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX93_CLK_USDHC2>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				assigned-clock-rates = <400000000>;
 				bus-width = <4>;
 				fsl,tuning-start-tap = <1>;
 				fsl,tuning-step = <2>;
@@ -1030,6 +1082,8 @@
 				fsl,num-tx-queues = <3>;
 				fsl,num-rx-queues = <3>;
 				fsl,stop-mode = <&wakeupmix_gpr 0x0c 1>;
+				nvmem-cells = <&eth_mac1>;
+				nvmem-cell-names = "mac-address";
 				status = "disabled";
 			};
 
@@ -1052,6 +1106,8 @@
 				assigned-clock-rates = <100000000>, <250000000>;
 				intf_mode = <&wakeupmix_gpr 0x28>;
 				snps,clk-csr = <0>;
+				nvmem-cells = <&eth_mac2>;
+				nvmem-cell-names = "mac-address";
 				status = "disabled";
 			};
 
@@ -1063,6 +1119,9 @@
 					 <&clk IMX93_CLK_WAKEUP_AXI>,
 					 <&clk IMX93_CLK_USDHC3_GATE>;
 				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX93_CLK_USDHC3>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				assigned-clock-rates = <400000000>;
 				bus-width = <4>;
 				fsl,tuning-start-tap = <1>;
 				fsl,tuning-step = <2>;
@@ -1136,6 +1195,15 @@
 			reg = <0x47510000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			eth_mac1: mac-address@4ec {
+				reg = <0x4ec 0x6>;
+			};
+
+			eth_mac2: mac-address@4f2 {
+				reg = <0x4f2 0x6>;
+			};
+
 		};
 
 		s4muap: mailbox@47520000 {
@@ -1167,6 +1235,50 @@
 			status = "disabled";
 		};
 
+		usbotg1: usb@4c100000 {
+			compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+			reg = <0x4c100000 0x200>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
+				 <&clk IMX93_CLK_HSIO_32K_GATE>;
+			clock-names = "usb_ctrl_root", "usb_wakeup";
+			assigned-clocks = <&clk IMX93_CLK_HSIO>;
+			assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+			assigned-clock-rates = <133000000>;
+			phys = <&usbphynop1>;
+			fsl,usbmisc = <&usbmisc1 0>;
+			status = "disabled";
+		};
+
+		usbmisc1: usbmisc@4c100200 {
+			compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+				     "fsl,imx6q-usbmisc";
+			reg = <0x4c100200 0x200>;
+			#index-cells = <1>;
+		};
+
+		usbotg2: usb@4c200000 {
+			compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+			reg = <0x4c200000 0x200>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
+				 <&clk IMX93_CLK_HSIO_32K_GATE>;
+			clock-names = "usb_ctrl_root", "usb_wakeup";
+			assigned-clocks = <&clk IMX93_CLK_HSIO>;
+			assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+			assigned-clock-rates = <133000000>;
+			phys = <&usbphynop2>;
+			fsl,usbmisc = <&usbmisc2 0>;
+			status = "disabled";
+		};
+
+		usbmisc2: usbmisc@4c200200 {
+			compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+				     "fsl,imx6q-usbmisc";
+			reg = <0x4c200200 0x200>;
+			#index-cells = <1>;
+		};
+
 		ddr-pmu@4e300dc0 {
 			compatible = "fsl,imx93-ddr-pmu";
 			reg = <0x4e300dc0 0x200>;

diff --git a/src/arm64/freescale/mba8mx.dtsi b/src/arm64/freescale/mba8mx.dtsi
index 427467d..8152415 100644
--- a/src/arm64/freescale/mba8mx.dtsi
+++ b/src/arm64/freescale/mba8mx.dtsi

@@ -316,17 +316,11 @@
 &mipi_dsi {
 	samsung,burst-clock-frequency = <891000000>;
 	samsung,esc-clock-frequency = <20000000>;
-
-	ports {
-		port@1 {
-			reg = <1>;
+};
 
-			mipi_dsi_out: endpoint {
-				data-lanes = <1 2 3 4>;
-				remote-endpoint = <&lvds_bridge_in>;
-			};
-		};
-	};
+&mipi_dsi_out {
+	data-lanes = <1 2 3 4>;
+	remote-endpoint = <&lvds_bridge_in>;
 };
 
 &pwm3 {

diff --git a/src/arm64/freescale/s32g2.dtsi b/src/arm64/freescale/s32g2.dtsi
index 5ac1cc9..fc19ae2 100644
--- a/src/arm64/freescale/s32g2.dtsi
+++ b/src/arm64/freescale/s32g2.dtsi

@@ -3,7 +3,7 @@
  * NXP S32G2 SoC family
  *
  * Copyright (c) 2021 SUSE LLC
- * Copyright (c) 2017-2021 NXP
+ * Copyright 2017-2021, 2024 NXP
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -14,6 +14,18 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	reserved-memory  {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scmi_buf: shm@d0000000 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0xd0000000 0x0 0x80>;
+			no-map;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -77,6 +89,19 @@
 	};
 
 	firmware {
+		scmi {
+			compatible = "arm,scmi-smc";
+			arm,smc-id = <0xc20000fe>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			shmem = <&scmi_buf>;
+
+			clks: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+		};
+
 		psci {
 			compatible = "arm,psci-1.0";
 			method = "smc";
@@ -113,6 +138,16 @@
 			status = "disabled";
 		};
 
+		usdhc0: mmc@402f0000 {
+			compatible = "nxp,s32g2-usdhc";
+			reg = <0x402f0000 0x1000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 32>, <&clks 31>, <&clks 33>;
+			clock-names = "ipg", "ahb", "per";
+			bus-width = <8>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@50800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x50800000 0x10000>,

diff --git a/src/arm64/freescale/s32g274a-evb.dts b/src/arm64/freescale/s32g274a-evb.dts
index 9118d8d..00070c9 100644
--- a/src/arm64/freescale/s32g274a-evb.dts
+++ b/src/arm64/freescale/s32g274a-evb.dts

@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright (c) 2021 SUSE LLC
- * Copyright (c) 2019-2021 NXP
+ * Copyright 2019-2021, 2024 NXP
  */
 
 /dts-v1/;
@@ -32,3 +32,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&usdhc0 {
+	status = "okay";
+};

diff --git a/src/arm64/freescale/s32g274a-rdb2.dts b/src/arm64/freescale/s32g274a-rdb2.dts
index e05ee85..b3fc128 100644
--- a/src/arm64/freescale/s32g274a-rdb2.dts
+++ b/src/arm64/freescale/s32g274a-rdb2.dts

@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright (c) 2021 SUSE LLC
- * Copyright (c) 2019-2021 NXP
+ * Copyright 2019-2021, 2024 NXP
  */
 
 /dts-v1/;
@@ -38,3 +38,7 @@
 &uart1 {
 	status = "okay";
 };
+
+&usdhc0 {
+	status = "okay";
+};

diff --git a/src/arm64/freescale/s32g3.dtsi b/src/arm64/freescale/s32g3.dtsi
new file mode 100644
index 0000000..c1b0899
--- /dev/null
+++ b/src/arm64/freescale/s32g3.dtsi

@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright 2021-2023 NXP
+ *
+ * Authors: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
+ *          Ciprian Costea <ciprianmarian.costea@nxp.com>
+ *          Andra-Teodora Ilie <andra.ilie@nxp.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "nxp,s32g3";
+	interrupt-parent = <&gic>;
+	#address-cells = <0x02>;
+	#size-cells = <0x02>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+
+				core1 {
+					cpu = <&cpu5>;
+				};
+
+				core2 {
+					cpu = <&cpu6>;
+				};
+
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+	};
+
+	firmware {
+		scmi: scmi {
+			compatible = "arm,scmi-smc";
+			shmem = <&scmi_shmem>;
+			arm,smc-id = <0xc20000fe>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dfs: protocol@13 {
+				reg = <0x13>;
+				#clock-cells = <1>;
+			};
+
+			clks: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	reserved-memory  {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scmi_shmem: shm@d0000000 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0xd0000000 0x0 0x80>;
+			no-map;
+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x80000000>;
+
+		uart0: serial@401c8000 {
+			compatible = "nxp,s32g3-linflexuart",
+				     "fsl,s32v234-linflexuart";
+			reg = <0x401c8000 0x3000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
+		uart1: serial@401cc000 {
+			compatible = "nxp,s32g3-linflexuart",
+				     "fsl,s32v234-linflexuart";
+			reg = <0x401cc000 0x3000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
+		uart2: serial@402bc000 {
+			compatible = "nxp,s32g3-linflexuart",
+				     "fsl,s32v234-linflexuart";
+			reg = <0x402bc000 0x3000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
+		usdhc0: mmc@402f0000 {
+			compatible = "nxp,s32g3-usdhc",
+				     "nxp,s32g2-usdhc";
+			reg = <0x402f0000 0x1000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 32>,
+				 <&clks 31>,
+				 <&clks 33>;
+			clock-names = "ipg", "ahb", "per";
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@50800000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x50800000 0x10000>,
+			      <0x50900000 0x200000>,
+			      <0x50400000 0x2000>,
+			      <0x50410000 0x2000>,
+			      <0x50420000 0x2000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* sec-phys */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* phys */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* virt */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, /* hyp-phys */
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; /* hyp-virt */
+		arm,no-tick-in-suspend;
+	};
+};

diff --git a/src/arm64/freescale/s32g399a-rdb3.dts b/src/arm64/freescale/s32g399a-rdb3.dts
new file mode 100644
index 0000000..9d67481
--- /dev/null
+++ b/src/arm64/freescale/s32g399a-rdb3.dts

@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright 2021-2023 NXP
+ *
+ * NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3)
+ */
+
+/dts-v1/;
+
+#include "s32g3.dtsi"
+
+/ {
+	model = "NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3)";
+	compatible = "nxp,s32g399a-rdb3", "nxp,s32g3";
+
+	aliases {
+		mmc0 = &usdhc0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* 4GiB RAM */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>,
+		      <0x8 0x80000000 0 0x80000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usdhc0 {
+	bus-width = <8>;
+	status = "okay";
+};

diff --git a/src/arm64/hisilicon/hi3798cv200.dtsi b/src/arm64/hisilicon/hi3798cv200.dtsi
index ed1b5a7..f6bc001 100644
--- a/src/arm64/hisilicon/hi3798cv200.dtsi
+++ b/src/arm64/hisilicon/hi3798cv200.dtsi

@@ -31,6 +31,13 @@
 			device_type = "cpu";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-size = <0x8000>; /* 32 KiB */
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>; /* 32 KiB */
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&L2>;
 		};
 
 		cpu@1 {
@@ -38,6 +45,13 @@
 			device_type = "cpu";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-size = <0x8000>; /* 32 KiB */
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>; /* 32 KiB */
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&L2>;
 		};
 
 		cpu@2 {
@@ -45,6 +59,13 @@
 			device_type = "cpu";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-size = <0x8000>; /* 32 KiB */
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>; /* 32 KiB */
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&L2>;
 		};
 
 		cpu@3 {
@@ -52,13 +73,33 @@
 			device_type = "cpu";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-size = <0x8000>; /* 32 KiB */
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>; /* 32 KiB */
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&L2>;
 		};
 	};
 
+	L2: l2-cache {
+		compatible = "cache";
+		cache-unified;
+		cache-size = <0x80000>; /* 512 KiB */
+		cache-line-size = <64>;
+		cache-sets = <512>;
+		cache-level = <2>;
+	};
+
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,gic-400";
 		reg = <0x0 0xf1001000 0x0 0x1000>,  /* GICD */
-		      <0x0 0xf1002000 0x0 0x100>;   /* GICC */
+		      <0x0 0xf1002000 0x0 0x2000>,  /* GICC */
+		      <0x0 0xf1004000 0x0 0x2000>,  /* GICH */
+		      <0x0 0xf1006000 0x0 0x2000>;  /* GICV */
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_HIGH)>;
 		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;

diff --git a/src/arm64/hisilicon/hi6220-hikey.dts b/src/arm64/hisilicon/hi6220-hikey.dts
index f0672ec..2d304ef 100644
--- a/src/arm64/hisilicon/hi6220-hikey.dts
+++ b/src/arm64/hisilicon/hi6220-hikey.dts

@@ -82,7 +82,7 @@
 		};
 	};
 
-	reg_sys_5v: regulator@0 {
+	reg_sys_5v: regulator-0 {
 		compatible = "regulator-fixed";
 		regulator-name = "SYS_5V";
 		regulator-min-microvolt = <5000000>;
@@ -91,7 +91,7 @@
 		regulator-always-on;
 	};
 
-	reg_vdd_3v3: regulator@1 {
+	reg_vdd_3v3: regulator-1 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -101,7 +101,7 @@
 		vin-supply = <&reg_sys_5v>;
 	};
 
-	reg_5v_hub: regulator@2 {
+	reg_5v_hub: regulator-2 {
 		compatible = "regulator-fixed";
 		regulator-name = "5V_HUB";
 		regulator-min-microvolt = <5000000>;
@@ -514,6 +514,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			port@0 {
+				reg = <0>;
 				adv7533_in: endpoint {
 					remote-endpoint = <&dsi_out0>;
 				};

diff --git a/src/arm64/hisilicon/hi6220.dtsi b/src/arm64/hisilicon/hi6220.dtsi
index be808bb..a589954 100644
--- a/src/arm64/hisilicon/hi6220.dtsi
+++ b/src/arm64/hisilicon/hi6220.dtsi

@@ -852,7 +852,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		tsensor: tsensor@0,f7030700 {
+		tsensor: tsensor@f7030700 {
 			compatible = "hisilicon,tsensor";
 			reg = <0x0 0xf7030700 0x0 0x1000>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;

diff --git a/src/arm64/hisilicon/hip05-d02.dts b/src/arm64/hisilicon/hip05-d02.dts
index c4eaebb..b7792d4 100644
--- a/src/arm64/hisilicon/hip05-d02.dts
+++ b/src/arm64/hisilicon/hip05-d02.dts

@@ -54,7 +54,7 @@
 	ranges = <0 0 0x0 0x90000000 0x08000000>,
 		 <1 0 0x0 0x98000000 0x08000000>;
 
-	nor-flash@0,0 {
+	nor-flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "numonyx,js28f00a", "cfi-flash";
@@ -75,7 +75,7 @@
 		};
 	};
 
-	cpld@1,0 {
+	cpld@100000000 {
 		compatible = "hisilicon,hip05-cpld";
 		reg = <1 0x0 0x100>;
 	};

diff --git a/src/arm64/hisilicon/hip05.dtsi b/src/arm64/hisilicon/hip05.dtsi
index 65ddc06..d0912ca 100644
--- a/src/arm64/hisilicon/hip05.dtsi
+++ b/src/arm64/hisilicon/hip05.dtsi

@@ -279,6 +279,12 @@
 		};
 	};
 
+	refclk200mhz: refclk200mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
@@ -298,12 +304,6 @@
 		#size-cells = <2>;
 		ranges;
 
-		refclk200mhz: refclk200mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <200000000>;
-		};
-
 		uart0: serial@80300000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x80300000 0x0 0x10000>;

diff --git a/src/arm64/hisilicon/hip06.dtsi b/src/arm64/hisilicon/hip06.dtsi
index f46c33d..3d7285e 100644
--- a/src/arm64/hisilicon/hip06.dtsi
+++ b/src/arm64/hisilicon/hip06.dtsi

@@ -258,6 +258,48 @@
 		};
 	};
 
+	eth2: ethernet-0 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <0>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	eth3: ethernet-1 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <1>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	eth0: ethernet-4 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <4>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	eth1: ethernet-5 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <5>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	refclk: refclk {
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+		#clock-cells = <0>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
@@ -374,12 +416,6 @@
 			};
 		};
 
-		refclk: refclk {
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-			#clock-cells = <0>;
-		};
-
 		usb_ohci: usb@a7030000 {
 			compatible = "generic-ohci";
 			reg = <0x0 0xa7030000 0x0 0x10000>;
@@ -436,7 +472,7 @@
 			};
 		};
 
-		dsaf0: dsa@c7000000 {
+		dsaf0: dsa@c5000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "hisilicon,hns-dsaf-v2";
@@ -570,42 +606,6 @@
 			};
 		};
 
-		eth0: ethernet-4 {
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <4>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
-		eth1: ethernet-5 {
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <5>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
-		eth2: ethernet-0 {
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <0>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
-		eth3: ethernet-1 {
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <1>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
 		sas0: sas@c3000000 {
 			compatible = "hisilicon,hip06-sas-v2";
 			reg = <0 0xc3000000 0 0x10000>;
@@ -733,7 +733,7 @@
 			status = "disabled";
 		};
 
-		pcie0: pcie@a0090000 {
+		pcie0: pcie@b0000000 {
 			compatible = "hisilicon,hip06-pcie-ecam";
 			reg = <0 0xb0000000 0 0x2000000>,
 			      <0 0xa0090000 0 0x10000>;

diff --git a/src/arm64/hisilicon/hip07.dtsi b/src/arm64/hisilicon/hip07.dtsi
index 81d907e..00a6bfa 100644
--- a/src/arm64/hisilicon/hip07.dtsi
+++ b/src/arm64/hisilicon/hip07.dtsi

@@ -1013,6 +1013,42 @@
 		};
 	};
 
+	eth0: ethernet-0 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <4>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	eth1: ethernet-1 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <5>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	eth2: ethernet-2 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <0>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	eth3: ethernet-3 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <1>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
@@ -1343,7 +1379,7 @@
 			};
 		};
 
-		dsaf0: dsa@c7000000 {
+		dsaf0: dsa@c5000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "hisilicon,hns-dsaf-v2";
@@ -1483,42 +1519,6 @@
 			};
 		};
 
-		eth0: ethernet@4 {
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <4>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
-		eth1: ethernet@5 {
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <5>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
-		eth2: ethernet@0 {
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <0>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
-		eth3: ethernet@1 {
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <1>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
 		infiniband@c4000000 {
 			compatible = "hisilicon,hns-roce-v1";
 			reg = <0x0 0xc4000000 0x0 0x100000>;
@@ -1724,7 +1724,7 @@
 			status = "disabled";
 		};
 
-		p0_pcie2_a: pcie@a00a0000 {
+		p0_pcie2_a: pcie@af800000 {
 			compatible = "hisilicon,hip07-pcie-ecam";
 			reg = <0 0xaf800000 0 0x800000>,
 			      <0 0xa00a0000 0 0x10000>;
@@ -1745,7 +1745,7 @@
 					 0x0 0 0 4 &mbigen_pcie2_a 671 4>;
 			status = "disabled";
 		};
-		p0_sec_a: crypto@d2000000 {
+		p0_sec_a: crypto@d0000000 {
 			compatible = "hisilicon,hip07-sec";
 			reg = <0x0 0xd0000000 0x0 0x10000>,
 			      <0x0 0xd2000000 0x0 0x10000>,
@@ -1786,7 +1786,7 @@
 				     <605 1>, <606 4>,
 				     <607 1>, <608 4>;
 		};
-		p0_sec_b: crypto@8,d2000000 {
+		p0_sec_b: crypto@8d0000000 {
 			compatible = "hisilicon,hip07-sec";
 			reg = <0x8 0xd0000000 0x0 0x10000>,
 			      <0x8 0xd2000000 0x0 0x10000>,
@@ -1827,7 +1827,7 @@
 				     <605 1>, <606 4>,
 				     <607 1>, <608 4>;
 		};
-		p1_sec_a: crypto@400,d2000000 {
+		p1_sec_a: crypto@400d0000000 {
 			compatible = "hisilicon,hip07-sec";
 			reg = <0x400 0xd0000000 0x0 0x10000>,
 			      <0x400 0xd2000000 0x0 0x10000>,
@@ -1868,7 +1868,7 @@
 				     <605 1>, <606 4>,
 				     <607 1>, <608 4>;
 		};
-		p1_sec_b: crypto@408,d2000000 {
+		p1_sec_b: crypto@408d0000000 {
 			compatible = "hisilicon,hip07-sec";
 			reg = <0x408 0xd0000000 0x0 0x10000>,
 			      <0x408 0xd2000000 0x0 0x10000>,

diff --git a/src/arm64/intel/keembay-soc.dtsi b/src/arm64/intel/keembay-soc.dtsi
index 781761d..ae00e9e 100644
--- a/src/arm64/intel/keembay-soc.dtsi
+++ b/src/arm64/intel/keembay-soc.dtsi

@@ -70,7 +70,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_PPI 0x7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 

diff --git a/src/arm64/intel/socfpga_agilex.dtsi b/src/arm64/intel/socfpga_agilex.dtsi
index 76aafa1..2a5eeb2 100644
--- a/src/arm64/intel/socfpga_agilex.dtsi
+++ b/src/arm64/intel/socfpga_agilex.dtsi

@@ -80,7 +80,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,

diff --git a/src/arm64/lg/lg1312-ref.dts b/src/arm64/lg/lg1312-ref.dts
index 260a2c5..cdd10f1 100644
--- a/src/arm64/lg/lg1312-ref.dts
+++ b/src/arm64/lg/lg1312-ref.dts

@@ -22,7 +22,7 @@
 		serial2 = &uart2;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x00000000 0x20000000>;
 	};

diff --git a/src/arm64/lg/lg1313-ref.dts b/src/arm64/lg/lg1313-ref.dts
index e89ae85..6ace977 100644
--- a/src/arm64/lg/lg1313-ref.dts
+++ b/src/arm64/lg/lg1313-ref.dts

@@ -22,7 +22,7 @@
 		serial2 = &uart2;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x00000000 0x20000000>;
 	};

diff --git a/src/arm64/marvell/ac5-98dx25xx.dtsi b/src/arm64/marvell/ac5-98dx25xx.dtsi
index 5591939..75377c2 100644
--- a/src/arm64/marvell/ac5-98dx25xx.dtsi
+++ b/src/arm64/marvell/ac5-98dx25xx.dtsi

@@ -68,7 +68,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a55-pmu";
 		interrupts = <GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>;
 	};
 

diff --git a/src/arm64/marvell/armada-3720-eDPU.dts b/src/arm64/marvell/armada-3720-eDPU.dts
index d6d37a1..91c2f8b 100644
--- a/src/arm64/marvell/armada-3720-eDPU.dts
+++ b/src/arm64/marvell/armada-3720-eDPU.dts

@@ -25,8 +25,6 @@
 	/* Actual device is MV88E6361 */
 	switch: switch@0 {
 		compatible = "marvell,mv88e6190";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0>;
 		status = "disabled";
 

diff --git a/src/arm64/marvell/armada-3720-espressobin-ultra.dts b/src/arm64/marvell/armada-3720-espressobin-ultra.dts
index 870bb38..b3cc2b7 100644
--- a/src/arm64/marvell/armada-3720-espressobin-ultra.dts
+++ b/src/arm64/marvell/armada-3720-espressobin-ultra.dts

@@ -114,54 +114,84 @@
 };
 
 &mdio {
+	/* Switch is @3, not @1 */
+	/delete-node/ ethernet-switch@1;
 	extphy: ethernet-phy@1 {
 		reg = <1>;
 
 		reset-gpios = <&gpionb 2 GPIO_ACTIVE_LOW>;
 	};
-};
 
-&switch0 {
-	reg = <3>;
+	switch0: ethernet-switch@3 {
+		compatible = "marvell,mv88e6085";
+		reg = <3>;
 
-	reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>;
+		dsa,member = <0 0>;
 
-	ethernet-ports {
-		switch0port1: ethernet-port@1 {
-			reg = <1>;
-			label = "lan0";
-			phy-handle = <&switch0phy0>;
-		};
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
 
-		switch0port2: ethernet-port@2 {
-			reg = <2>;
-			label = "lan1";
-			phy-handle = <&switch0phy1>;
-		};
+			switch0port0: ethernet-port@0 {
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
 
-		switch0port3: ethernet-port@3 {
-			reg = <3>;
-			label = "lan2";
-			phy-handle = <&switch0phy2>;
-		};
+			switch0port1: ethernet-port@1 {
+				reg = <1>;
+				label = "lan0";
+				phy-handle = <&switch0phy0>;
+			};
 
-		switch0port4: ethernet-port@4 {
-			reg = <4>;
-			label = "lan3";
-			phy-handle = <&switch0phy3>;
-		};
+			switch0port2: ethernet-port@2 {
+				reg = <2>;
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+			};
 
-		switch0port5: ethernet-port@5 {
-			reg = <5>;
-			label = "wan";
-			phy-handle = <&extphy>;
-			phy-mode = "sgmii";
+			switch0port3: ethernet-port@3 {
+				reg = <3>;
+				label = "lan2";
+				phy-handle = <&switch0phy2>;
+			};
+
+			switch0port4: ethernet-port@4 {
+				reg = <4>;
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+			};
+
+			switch0port5: ethernet-port@5 {
+				reg = <5>;
+				label = "wan";
+				phy-handle = <&extphy>;
+				phy-mode = "sgmii";
+			};
 		};
-	};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
 
-	mdio {
-		switch0phy3: ethernet-phy@14 {
-			reg = <0x14>;
+			switch0phy0: ethernet-phy@11 {
+				reg = <0x11>;
+			};
+			switch0phy1: ethernet-phy@12 {
+				reg = <0x12>;
+			};
+			switch0phy2: ethernet-phy@13 {
+				reg = <0x13>;
+			};
+			switch0phy3: ethernet-phy@14 {
+				reg = <0x14>;
+			};
 		};
 	};
 };

diff --git a/src/arm64/marvell/armada-3720-turris-mox.dts b/src/arm64/marvell/armada-3720-turris-mox.dts
index f1a9f22..54453b0 100644
--- a/src/arm64/marvell/armada-3720-turris-mox.dts
+++ b/src/arm64/marvell/armada-3720-turris-mox.dts

@@ -216,8 +216,6 @@
 	assigned-clock-rates = <20000000>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <20000000>;

diff --git a/src/arm64/marvell/armada-37xx.dtsi b/src/arm64/marvell/armada-37xx.dtsi
index 1cc3fa1..9603223 100644
--- a/src/arm64/marvell/armada-37xx.dtsi
+++ b/src/arm64/marvell/armada-37xx.dtsi

@@ -68,7 +68,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 

diff --git a/src/arm64/marvell/armada-ap80x.dtsi b/src/arm64/marvell/armada-ap80x.dtsi
index 7ec7c78..fdf88cd 100644
--- a/src/arm64/marvell/armada-ap80x.dtsi
+++ b/src/arm64/marvell/armada-ap80x.dtsi

@@ -61,7 +61,7 @@
 			compatible = "simple-bus";
 			ranges = <0x0 0x0 0xf0000000 0x1000000>;
 
-			smmu: iommu@5000000 {
+			smmu: iommu@100000 {
 				compatible = "marvell,ap806-smmu-500", "arm,mmu-500";
 				reg = <0x100000 0x100000>;
 				dma-coherent;

diff --git a/src/arm64/marvell/cn9130-crb.dtsi b/src/arm64/marvell/cn9130-crb.dtsi
index 6fcc34f..5e7d6de 100644
--- a/src/arm64/marvell/cn9130-crb.dtsi
+++ b/src/arm64/marvell/cn9130-crb.dtsi

@@ -26,7 +26,7 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	ap0_reg_mmc_vccq: ap0_mmc_vccq@0 {
+	ap0_reg_mmc_vccq: regulator-1 {
 		compatible = "regulator-gpio";
 		regulator-name = "ap0_mmc_vccq";
 		regulator-min-microvolt = <1800000>;
@@ -36,7 +36,7 @@
 			  3300000 0x0>;
 	};
 
-	cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+	cp0_reg_usb3_vbus1: regulator-2 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp0-xhci1-vbus";
 		regulator-min-microvolt = <5000000>;
@@ -45,16 +45,16 @@
 		gpio = <&expander0 8 GPIO_ACTIVE_HIGH>;
 	};
 
-	cp0_usb3_0_phy0: cp0_usb3_phy0 {
+	cp0_usb3_0_phy0: usb-phy-1 {
 		compatible = "usb-nop-xceiv";
 	};
 
-	cp0_usb3_0_phy1: cp0_usb3_phy1 {
+	cp0_usb3_0_phy1: usb-phy-2 {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&cp0_reg_usb3_vbus1>;
 	};
 
-	cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+	cp0_reg_sd_vccq: regulator-3 {
 		compatible = "regulator-gpio";
 		regulator-name = "cp0_sd_vccq";
 		regulator-min-microvolt = <1800000>;
@@ -64,7 +64,7 @@
 			  3300000 0x0>;
 	};
 
-	cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+	cp0_reg_sd_vcc: regulator-4 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp0_sd_vcc";
 		regulator-min-microvolt = <3300000>;
@@ -82,7 +82,6 @@
 		tx-disable-gpios = <&expander0 2 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpios = <&cp0_gpio1 24 GPIO_ACTIVE_HIGH>;
 		maximum-power-milliwatt = <3000>;
-		status = "okay";
 	};
 };
 

diff --git a/src/arm64/marvell/cn9130-db.dtsi b/src/arm64/marvell/cn9130-db.dtsi
index 6eb6a17..be56a23 100644
--- a/src/arm64/marvell/cn9130-db.dtsi
+++ b/src/arm64/marvell/cn9130-db.dtsi

@@ -30,7 +30,7 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	ap0_reg_sd_vccq: ap0_sd_vccq@0 {
+	ap0_reg_sd_vccq: regulator-1 {
 		compatible = "regulator-gpio";
 		regulator-name = "ap0_sd_vccq";
 		regulator-min-microvolt = <1800000>;
@@ -39,7 +39,7 @@
 		states = <1800000 0x1 3300000 0x0>;
 	};
 
-	cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 {
+	cp0_reg_usb3_vbus0: regulator-2 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp0-xhci0-vbus";
 		regulator-min-microvolt = <5000000>;
@@ -48,12 +48,12 @@
 		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	cp0_usb3_0_phy0: cp0_usb3_phy@0 {
+	cp0_usb3_0_phy0: usb-phy-1 {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&cp0_reg_usb3_vbus0>;
 	};
 
-	cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+	cp0_reg_usb3_vbus1: regulator-3 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp0-xhci1-vbus";
 		regulator-min-microvolt = <5000000>;
@@ -62,12 +62,12 @@
 		gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
 	};
 
-	cp0_usb3_0_phy1: cp0_usb3_phy@1 {
+	cp0_usb3_0_phy1: usb-phy-2 {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&cp0_reg_usb3_vbus1>;
 	};
 
-	cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+	cp0_reg_sd_vccq: regulator-4 {
 		compatible = "regulator-gpio";
 		regulator-name = "cp0_sd_vccq";
 		regulator-min-microvolt = <1800000>;
@@ -77,7 +77,7 @@
 			  3300000 0x0>;
 	};
 
-	cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+	cp0_reg_sd_vcc: regulator-5 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp0_sd_vcc";
 		regulator-min-microvolt = <3300000>;
@@ -87,7 +87,7 @@
 		regulator-always-on;
 	};
 
-	cp0_sfp_eth0: sfp-eth@0 {
+	cp0_sfp_eth0: sfp-eth-1 {
 		compatible = "sff,sfp";
 		i2c-bus = <&cp0_sfpp0_i2c>;
 		los-gpios = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>;
@@ -311,8 +311,6 @@
 	reg = <0x700680 0x50>;
 
 	flash@0 {
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		/* On-board MUX does not allow higher frequencies */

diff --git a/src/arm64/marvell/cn9131-db.dtsi b/src/arm64/marvell/cn9131-db.dtsi
index ff8422f..ad7360c 100644
--- a/src/arm64/marvell/cn9131-db.dtsi
+++ b/src/arm64/marvell/cn9131-db.dtsi

@@ -18,7 +18,7 @@
 		ethernet4 = &cp1_eth1;
 	};
 
-	cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 {
+	cp1_reg_usb3_vbus0: regulator-6 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_xhci0_vbus_pins>;
@@ -29,12 +29,12 @@
 		gpio = <&cp1_gpio1 3 GPIO_ACTIVE_HIGH>;
 	};
 
-	cp1_usb3_0_phy0: cp1_usb3_phy0 {
+	cp1_usb3_0_phy0: usb-phy-3 {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&cp1_reg_usb3_vbus0>;
 	};
 
-	cp1_sfp_eth1: sfp-eth1 {
+	cp1_sfp_eth1: sfp-eth-2 {
 		compatible = "sff,sfp";
 		i2c-bus = <&cp1_i2c0>;
 		los-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>;
@@ -138,8 +138,6 @@
 	reg = <0x700680 0x50>;
 
 	flash@0 {
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		/* On-board MUX does not allow higher frequencies */

diff --git a/src/arm64/marvell/cn9132-db.dtsi b/src/arm64/marvell/cn9132-db.dtsi
index 512a4fa..e753cfd 100644
--- a/src/arm64/marvell/cn9132-db.dtsi
+++ b/src/arm64/marvell/cn9132-db.dtsi

@@ -17,7 +17,7 @@
 		ethernet5 = &cp2_eth0;
 	};
 
-	cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
+	cp2_reg_usb3_vbus0: regulator-7 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp2-xhci0-vbus";
 		regulator-min-microvolt = <5000000>;
@@ -26,12 +26,12 @@
 		gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
 	};
 
-	cp2_usb3_0_phy0: cp2_usb3_phy0 {
+	cp2_usb3_0_phy0: usb-phy-4 {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&cp2_reg_usb3_vbus0>;
 	};
 
-	cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
+	cp2_reg_usb3_vbus1: regulator-8 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp2-xhci1-vbus";
 		regulator-min-microvolt = <5000000>;
@@ -40,12 +40,12 @@
 		gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
 	};
 
-	cp2_usb3_0_phy1: cp2_usb3_phy1 {
+	cp2_usb3_0_phy1: usb-phy-5 {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&cp2_reg_usb3_vbus1>;
 	};
 
-	cp2_reg_sd_vccq: cp2_sd_vccq@0 {
+	cp2_reg_sd_vccq: regulator-9 {
 		compatible = "regulator-gpio";
 		regulator-name = "cp2_sd_vcc";
 		regulator-min-microvolt = <1800000>;
@@ -54,7 +54,7 @@
 		states = <1800000 0x1 3300000 0x0>;
 	};
 
-	cp2_sfp_eth0: sfp-eth0 {
+	cp2_sfp_eth0: sfp-eth-3 {
 		compatible = "sff,sfp";
 		i2c-bus = <&cp2_sfpp0_i2c>;
 		los-gpios = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;

diff --git a/src/arm64/mediatek/mt8516.dtsi b/src/arm64/mediatek/mt8516.dtsi
index 9cbd6dd..d0b03dc 100644
--- a/src/arm64/mediatek/mt8516.dtsi
+++ b/src/arm64/mediatek/mt8516.dtsi

@@ -165,7 +165,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a35-pmu";
 		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,

diff --git a/src/arm64/microchip/sparx5.dtsi b/src/arm64/microchip/sparx5.dtsi
index 24075cd..c3029e0 100644
--- a/src/arm64/microchip/sparx5.dtsi
+++ b/src/arm64/microchip/sparx5.dtsi

@@ -447,7 +447,7 @@
 			pinctrl-names = "default";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0x6 0x110102d4 0x24>;
+			reg = <0x6 0x110102f8 0x24>;
 		};
 
 		mdio3: mdio@61101031c {
@@ -460,7 +460,7 @@
 			reg = <0x6 0x1101031c 0x24>;
 		};
 
-		serdes: serdes@10808000 {
+		serdes: serdes@610808000 {
 			compatible = "microchip,sparx5-serdes";
 			#phy-cells = <1>;
 			clocks = <&sys_clk>;

diff --git a/src/arm64/microchip/sparx5_pcb134_board.dtsi b/src/arm64/microchip/sparx5_pcb134_board.dtsi
index f3e226d..2c55747 100644
--- a/src/arm64/microchip/sparx5_pcb134_board.dtsi
+++ b/src/arm64/microchip/sparx5_pcb134_board.dtsi

@@ -15,234 +15,234 @@
 
 	leds {
 		compatible = "gpio-leds";
-		led@0 {
+		led-0 {
 			label = "twr0:green";
 			gpios = <&sgpio_out0 8 0 GPIO_ACTIVE_LOW>;
 		};
-		led@1 {
+		led-1 {
 			label = "twr0:yellow";
 			gpios = <&sgpio_out0 8 1 GPIO_ACTIVE_LOW>;
 		};
-		led@2 {
+		led-2 {
 			label = "twr1:green";
 			gpios = <&sgpio_out0 9 0 GPIO_ACTIVE_LOW>;
 		};
-		led@3 {
+		led-3 {
 			label = "twr1:yellow";
 			gpios = <&sgpio_out0 9 1 GPIO_ACTIVE_LOW>;
 		};
-		led@4 {
+		led-4 {
 			label = "twr2:green";
 			gpios = <&sgpio_out0 10 0 GPIO_ACTIVE_LOW>;
 		};
-		led@5 {
+		led-5 {
 			label = "twr2:yellow";
 			gpios = <&sgpio_out0 10 1 GPIO_ACTIVE_LOW>;
 		};
-		led@6 {
+		led-6 {
 			label = "twr3:green";
 			gpios = <&sgpio_out0 11 0 GPIO_ACTIVE_LOW>;
 		};
-		led@7 {
+		led-7 {
 			label = "twr3:yellow";
 			gpios = <&sgpio_out0 11 1 GPIO_ACTIVE_LOW>;
 		};
-		led@8 {
+		led-8 {
 			label = "eth12:green";
 			gpios = <&sgpio_out0 12 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@9 {
+		led-9 {
 			label = "eth12:yellow";
 			gpios = <&sgpio_out0 12 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@10 {
+		led-10 {
 			label = "eth13:green";
 			gpios = <&sgpio_out0 13 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@11 {
+		led-11 {
 			label = "eth13:yellow";
 			gpios = <&sgpio_out0 13 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@12 {
+		led-12 {
 			label = "eth14:green";
 			gpios = <&sgpio_out0 14 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@13 {
+		led-13 {
 			label = "eth14:yellow";
 			gpios = <&sgpio_out0 14 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@14 {
+		led-14 {
 			label = "eth15:green";
 			gpios = <&sgpio_out0 15 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@15 {
+		led-15 {
 			label = "eth15:yellow";
 			gpios = <&sgpio_out0 15 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@16 {
+		led-16 {
 			label = "eth48:green";
 			gpios = <&sgpio_out1 16 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@17 {
+		led-17 {
 			label = "eth48:yellow";
 			gpios = <&sgpio_out1 16 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@18 {
+		led-18 {
 			label = "eth49:green";
 			gpios = <&sgpio_out1 17 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@19 {
+		led-19 {
 			label = "eth49:yellow";
 			gpios = <&sgpio_out1 17 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@20 {
+		led-20 {
 			label = "eth50:green";
 			gpios = <&sgpio_out1 18 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@21 {
+		led-21 {
 			label = "eth50:yellow";
 			gpios = <&sgpio_out1 18 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@22 {
+		led-22 {
 			label = "eth51:green";
 			gpios = <&sgpio_out1 19 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@23 {
+		led-23 {
 			label = "eth51:yellow";
 			gpios = <&sgpio_out1 19 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@24 {
+		led-24 {
 			label = "eth52:green";
 			gpios = <&sgpio_out1 20 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@25 {
+		led-25 {
 			label = "eth52:yellow";
 			gpios = <&sgpio_out1 20 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@26 {
+		led-26 {
 			label = "eth53:green";
 			gpios = <&sgpio_out1 21 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@27 {
+		led-27 {
 			label = "eth53:yellow";
 			gpios = <&sgpio_out1 21 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@28 {
+		led-28 {
 			label = "eth54:green";
 			gpios = <&sgpio_out1 22 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@29 {
+		led-29 {
 			label = "eth54:yellow";
 			gpios = <&sgpio_out1 22 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@30 {
+		led-30 {
 			label = "eth55:green";
 			gpios = <&sgpio_out1 23 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@31 {
+		led-31 {
 			label = "eth55:yellow";
 			gpios = <&sgpio_out1 23 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@32 {
+		led-32 {
 			label = "eth56:green";
 			gpios = <&sgpio_out1 24 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@33 {
+		led-33 {
 			label = "eth56:yellow";
 			gpios = <&sgpio_out1 24 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@34 {
+		led-34 {
 			label = "eth57:green";
 			gpios = <&sgpio_out1 25 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@35 {
+		led-35 {
 			label = "eth57:yellow";
 			gpios = <&sgpio_out1 25 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@36 {
+		led-36 {
 			label = "eth58:green";
 			gpios = <&sgpio_out1 26 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@37 {
+		led-37 {
 			label = "eth58:yellow";
 			gpios = <&sgpio_out1 26 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@38 {
+		led-38 {
 			label = "eth59:green";
 			gpios = <&sgpio_out1 27 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@39 {
+		led-39 {
 			label = "eth59:yellow";
 			gpios = <&sgpio_out1 27 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@40 {
+		led-40 {
 			label = "eth60:green";
 			gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@41 {
+		led-41 {
 			label = "eth60:yellow";
 			gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@42 {
+		led-42 {
 			label = "eth61:green";
 			gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@43 {
+		led-43 {
 			label = "eth61:yellow";
 			gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@44 {
+		led-44 {
 			label = "eth62:green";
 			gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@45 {
+		led-45 {
 			label = "eth62:yellow";
 			gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@46 {
+		led-46 {
 			label = "eth63:green";
 			gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@47 {
+		led-47 {
 			label = "eth63:yellow";
 			gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
@@ -274,15 +274,6 @@
 
 &spi0 {
 	status = "okay";
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <8000000>;
-		reg = <0>;
-	};
-};
-
-&spi0 {
-	status = "okay";
 	spi@0 {
 		compatible = "spi-mux";
 		mux-controls = <&mux>;
@@ -395,13 +386,13 @@
 };
 
 &axi {
-	i2c0_imux: i2c0-imux@0 {
+	i2c0_imux: i2c-mux-0 {
 		compatible = "i2c-mux-pinctrl";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		i2c-parent = <&i2c0>;
 	};
-	i2c0_emux: i2c0-emux@0 {
+	i2c0_emux: i2c-mux-1 {
 		compatible = "i2c-mux-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -427,62 +418,62 @@
 	pinctrl-10 = <&i2cmux_10>;
 	pinctrl-11 = <&i2cmux_11>;
 	pinctrl-12 = <&i2cmux_pins_i>;
-	i2c_sfp1: i2c_sfp1 {
+	i2c_sfp1: i2c@0 {
 		reg = <0x0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp2: i2c_sfp2 {
+	i2c_sfp2: i2c@1 {
 		reg = <0x1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp3: i2c_sfp3 {
+	i2c_sfp3: i2c@2 {
 		reg = <0x2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp4: i2c_sfp4 {
+	i2c_sfp4: i2c@3 {
 		reg = <0x3>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp5: i2c_sfp5 {
+	i2c_sfp5: i2c@4 {
 		reg = <0x4>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp6: i2c_sfp6 {
+	i2c_sfp6: i2c@5 {
 		reg = <0x5>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp7: i2c_sfp7 {
+	i2c_sfp7: i2c@6 {
 		reg = <0x6>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp8: i2c_sfp8 {
+	i2c_sfp8: i2c@7 {
 		reg = <0x7>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp9: i2c_sfp9 {
+	i2c_sfp9: i2c@8 {
 		reg = <0x8>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp10: i2c_sfp10 {
+	i2c_sfp10: i2c@9 {
 		reg = <0x9>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp11: i2c_sfp11 {
+	i2c_sfp11: i2c@a {
 		reg = <0xa>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp12: i2c_sfp12 {
+	i2c_sfp12: i2c@b {
 		reg = <0xb>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -495,42 +486,42 @@
 		     &gpio 61 GPIO_ACTIVE_HIGH
 		     &gpio 54 GPIO_ACTIVE_HIGH>;
 	idle-state = <0x8>;
-	i2c_sfp13: i2c_sfp13 {
+	i2c_sfp13: i2c@0 {
 		reg = <0x0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp14: i2c_sfp14 {
+	i2c_sfp14: i2c@1 {
 		reg = <0x1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp15: i2c_sfp15 {
+	i2c_sfp15: i2c@2 {
 		reg = <0x2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp16: i2c_sfp16 {
+	i2c_sfp16: i2c@3 {
 		reg = <0x3>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp17: i2c_sfp17 {
+	i2c_sfp17: i2c@4 {
 		reg = <0x4>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp18: i2c_sfp18 {
+	i2c_sfp18: i2c@5 {
 		reg = <0x5>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp19: i2c_sfp19 {
+	i2c_sfp19: i2c@6 {
 		reg = <0x6>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp20: i2c_sfp20 {
+	i2c_sfp20: i2c@7 {
 		reg = <0x7>;
 		#address-cells = <1>;
 		#size-cells = <0>;

diff --git a/src/arm64/microchip/sparx5_pcb135_board.dtsi b/src/arm64/microchip/sparx5_pcb135_board.dtsi
index 82ce007..af2f183 100644
--- a/src/arm64/microchip/sparx5_pcb135_board.dtsi
+++ b/src/arm64/microchip/sparx5_pcb135_board.dtsi

@@ -15,42 +15,42 @@
 
 	leds {
 		compatible = "gpio-leds";
-		led@0 {
+		led-0 {
 			label = "eth60:yellow";
 			gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
-		led@1 {
+		led-1 {
 			label = "eth60:green";
 			gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
-		led@2 {
+		led-2 {
 			label = "eth61:yellow";
 			gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
-		led@3 {
+		led-3 {
 			label = "eth61:green";
 			gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
-		led@4 {
+		led-4 {
 			label = "eth62:yellow";
 			gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
-		led@5 {
+		led-5 {
 			label = "eth62:green";
 			gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
-		led@6 {
+		led-6 {
 			label = "eth63:yellow";
 			gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
-		led@7 {
+		led-7 {
 			label = "eth63:green";
 			gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
@@ -89,15 +89,6 @@
 
 &spi0 {
 	status = "okay";
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <8000000>;
-		reg = <0>;
-	};
-};
-
-&spi0 {
-	status = "okay";
 	spi@0 {
 		compatible = "spi-mux";
 		mux-controls = <&mux>;
@@ -129,7 +120,7 @@
 };
 
 &axi {
-	i2c0_imux: i2c0-imux@0 {
+	i2c0_imux: i2c-mux {
 		compatible = "i2c-mux-pinctrl";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -146,22 +137,22 @@
 	pinctrl-2 = <&i2cmux_s31>;
 	pinctrl-3 = <&i2cmux_s32>;
 	pinctrl-4 = <&i2cmux_pins_i>;
-	i2c_sfp1: i2c_sfp1 {
+	i2c_sfp1: i2c@0 {
 		reg = <0x0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp2: i2c_sfp2 {
+	i2c_sfp2: i2c@1 {
 		reg = <0x1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp3: i2c_sfp3 {
+	i2c_sfp3: i2c@2 {
 		reg = <0x2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp4: i2c_sfp4 {
+	i2c_sfp4: i2c@3 {
 		reg = <0x3>;
 		#address-cells = <1>;
 		#size-cells = <0>;

diff --git a/src/arm64/nuvoton/nuvoton-npcm845-evb.dts b/src/arm64/nuvoton/nuvoton-npcm845-evb.dts
index a5ab2bc..eeceb5b 100644
--- a/src/arm64/nuvoton/nuvoton-npcm845-evb.dts
+++ b/src/arm64/nuvoton/nuvoton-npcm845-evb.dts

@@ -16,7 +16,7 @@
 		stdout-path = &serial0;
 	};
 
-	memory {
+	memory@0 {
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 };

diff --git a/src/arm64/nvidia/tegra132-norrin.dts b/src/arm64/nvidia/tegra132-norrin.dts
index 14d5885..683ac12 100644
--- a/src/arm64/nvidia/tegra132-norrin.dts
+++ b/src/arm64/nvidia/tegra132-norrin.dts

@@ -9,8 +9,8 @@
 	compatible = "nvidia,norrin", "nvidia,tegra132", "nvidia,tegra124";
 
 	aliases {
-		rtc0 = "/i2c@7000d000/as3722@40";
-		rtc1 = "/rtc@7000e000";
+		rtc0 = &as3722;
+		rtc1 = &tegra_rtc;
 		serial0 = &uarta;
 	};
 

diff --git a/src/arm64/nvidia/tegra132.dtsi b/src/arm64/nvidia/tegra132.dtsi
index 7e24a21..5bcccfe 100644
--- a/src/arm64/nvidia/tegra132.dtsi
+++ b/src/arm64/nvidia/tegra132.dtsi

@@ -572,7 +572,7 @@
 		status = "disabled";
 	};
 
-	rtc@7000e000 {
+	tegra_rtc: rtc@7000e000 {
 		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
 		reg = <0x0 0x7000e000 0x0 0x100>;
 		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;

diff --git a/src/arm64/nvidia/tegra210-smaug.dts b/src/arm64/nvidia/tegra210-smaug.dts
index 9ebb736..2e5b6b2 100644
--- a/src/arm64/nvidia/tegra210-smaug.dts
+++ b/src/arm64/nvidia/tegra210-smaug.dts

@@ -25,7 +25,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0xc0000000>;
 	};

diff --git a/src/arm64/nvidia/tegra210.dtsi b/src/arm64/nvidia/tegra210.dtsi
index 47f8268..882b1d1 100644
--- a/src/arm64/nvidia/tegra210.dtsi
+++ b/src/arm64/nvidia/tegra210.dtsi

@@ -2004,7 +2004,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a57-pmu";
 		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,

diff --git a/src/arm64/nvidia/tegra234.dtsi b/src/arm64/nvidia/tegra234.dtsi
index 78cbfdd..f2e2d8d 100644
--- a/src/arm64/nvidia/tegra234.dtsi
+++ b/src/arm64/nvidia/tegra234.dtsi

@@ -4406,6 +4406,22 @@
 				 */
 				status = "disabled";
 			};
+
+			crypto@15820000 {
+				compatible = "nvidia,tegra234-se-aes";
+				reg = <0x00 0x15820000 0x00 0x10000>;
+				clocks = <&bpmp TEGRA234_CLK_SE>;
+				iommus = <&smmu_niso1 TEGRA234_SID_SES_SE1>;
+				dma-coherent;
+			};
+
+			crypto@15840000 {
+				compatible = "nvidia,tegra234-se-hash";
+				reg = <0x00 0x15840000 0x00 0x10000>;
+				clocks = <&bpmp TEGRA234_CLK_SE>;
+				iommus = <&smmu_niso1 TEGRA234_SID_SES_SE2>;
+				dma-coherent;
+			};
 		};
 
 		pcie@140a0000 {

diff --git a/src/arm64/qcom/apq8016-sbc.dts b/src/arm64/qcom/apq8016-sbc.dts
index 9ffad7d..aba0842 100644
--- a/src/arm64/qcom/apq8016-sbc.dts
+++ b/src/arm64/qcom/apq8016-sbc.dts

@@ -91,7 +91,7 @@
 
 		compatible = "gpio-leds";
 
-		led@1 {
+		led-1 {
 			label = "apq8016-sbc:green:user1";
 			function = LED_FUNCTION_HEARTBEAT;
 			color = <LED_COLOR_ID_GREEN>;
@@ -100,7 +100,7 @@
 			default-state = "off";
 		};
 
-		led@2 {
+		led-2 {
 			label = "apq8016-sbc:green:user2";
 			function = LED_FUNCTION_DISK_ACTIVITY;
 			color = <LED_COLOR_ID_GREEN>;
@@ -109,7 +109,7 @@
 			default-state = "off";
 		};
 
-		led@3 {
+		led-3 {
 			label = "apq8016-sbc:green:user3";
 			function = LED_FUNCTION_DISK_ACTIVITY;
 			color = <LED_COLOR_ID_GREEN>;
@@ -118,7 +118,7 @@
 			default-state = "off";
 		};
 
-		led@4 {
+		led-4 {
 			label = "apq8016-sbc:green:user4";
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
@@ -127,7 +127,7 @@
 			default-state = "off";
 		};
 
-		led@5 {
+		led-5 {
 			label = "apq8016-sbc:yellow:wlan";
 			function = LED_FUNCTION_WLAN;
 			color = <LED_COLOR_ID_YELLOW>;
@@ -136,7 +136,7 @@
 			default-state = "off";
 		};
 
-		led@6 {
+		led-6 {
 			label = "apq8016-sbc:blue:bt";
 			function = LED_FUNCTION_BLUETOOTH;
 			color = <LED_COLOR_ID_BLUE>;

diff --git a/src/arm64/qcom/ipq6018.dtsi b/src/arm64/qcom/ipq6018.dtsi
index 4e29ade..17ab6c4 100644
--- a/src/arm64/qcom/ipq6018.dtsi
+++ b/src/arm64/qcom/ipq6018.dtsi

@@ -907,6 +907,16 @@
 				      "axi_s_sticky";
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 	};
 

diff --git a/src/arm64/qcom/ipq8074-hk10.dtsi b/src/arm64/qcom/ipq8074-hk10.dtsi
index 1b8379b..34e2f80 100644
--- a/src/arm64/qcom/ipq8074-hk10.dtsi
+++ b/src/arm64/qcom/ipq8074-hk10.dtsi

@@ -16,7 +16,7 @@
 		stdout-path = "serial0";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x0 0x40000000 0x0 0x20000000>;
 	};

diff --git a/src/arm64/qcom/ipq8074.dtsi b/src/arm64/qcom/ipq8074.dtsi
index e5b8975..5d42de8 100644
--- a/src/arm64/qcom/ipq8074.dtsi
+++ b/src/arm64/qcom/ipq8074.dtsi

@@ -323,6 +323,13 @@
 				bias-disable;
 			};
 
+			serial_5_pins: serial5-state {
+				pins = "gpio9", "gpio16";
+				function = "blsp5_uart";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
 			i2c_0_pins: i2c-0-state {
 				pins = "gpio42", "gpio43";
 				function = "blsp1_i2c";
@@ -349,7 +356,7 @@
 				       "gpio5", "gpio6", "gpio7",
 				       "gpio8", "gpio10", "gpio11",
 				       "gpio12", "gpio13", "gpio14",
-				       "gpio15", "gpio16", "gpio17";
+				       "gpio15", "gpio17";
 				function = "qpic";
 				drive-strength = <8>;
 				bias-disable;
@@ -471,6 +478,18 @@
 			status = "disabled";
 		};
 
+		blsp1_uart6: serial@78b4000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b4000 0x200>;
+			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-0 = <&serial_5_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
 		blsp1_spi1: spi@78b5000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			#address-cells = <1>;
@@ -864,6 +883,16 @@
 				      "ahb",
 				      "axi_m_sticky";
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie0: pcie@20000000 {
@@ -929,6 +958,16 @@
 				      "axi_m_sticky",
 				      "axi_s_sticky";
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 	};
 

diff --git a/src/arm64/qcom/msm8916-longcheer-l8150.dts b/src/arm64/qcom/msm8916-longcheer-l8150.dts
index 3a3e794..7f0c2c1 100644
--- a/src/arm64/qcom/msm8916-longcheer-l8150.dts
+++ b/src/arm64/qcom/msm8916-longcheer-l8150.dts

@@ -12,7 +12,7 @@
 
 / {
 	model = "Longcheer L8150";
-	compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916";
+	compatible = "longcheer,l8150", "qcom,msm8916";
 	chassis-type = "handset";
 
 	aliases {

diff --git a/src/arm64/qcom/msm8916-mtp.dts b/src/arm64/qcom/msm8916-mtp.dts
index ac527a3..c11a845 100644
--- a/src/arm64/qcom/msm8916-mtp.dts
+++ b/src/arm64/qcom/msm8916-mtp.dts

@@ -9,7 +9,7 @@
 
 / {
 	model = "Qualcomm Technologies, Inc. MSM 8916 MTP";
-	compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1", "qcom,msm8916";
+	compatible = "qcom,msm8916-mtp", "qcom,msm8916";
 	chassis-type = "handset";
 
 	aliases {

diff --git a/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi b/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi
index 2937495..4bbbee8 100644
--- a/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi

@@ -128,6 +128,12 @@
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&muic_int_default>;
+
+			usb_con: connector {
+				compatible = "usb-b-connector";
+				label = "micro-USB";
+				type = "micro";
+			};
 		};
 	};
 

diff --git a/src/arm64/qcom/msm8916-samsung-e2015-common.dtsi b/src/arm64/qcom/msm8916-samsung-e2015-common.dtsi
index 3c49dac..c50f81a 100644
--- a/src/arm64/qcom/msm8916-samsung-e2015-common.dtsi
+++ b/src/arm64/qcom/msm8916-samsung-e2015-common.dtsi

@@ -23,6 +23,12 @@
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&muic_int_default>;
+
+			usb_con: connector {
+				compatible = "usb-b-connector";
+				label = "micro-USB";
+				type = "micro";
+			};
 		};
 	};
 

diff --git a/src/arm64/qcom/msm8916-samsung-fortuna-common.dtsi b/src/arm64/qcom/msm8916-samsung-fortuna-common.dtsi
index c2800ad..5e933fb 100644
--- a/src/arm64/qcom/msm8916-samsung-fortuna-common.dtsi
+++ b/src/arm64/qcom/msm8916-samsung-fortuna-common.dtsi

@@ -26,6 +26,30 @@
 		};
 	};
 
+	clk_pwm_backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&clk_pwm 0 100000>;
+
+		enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <128>;
+
+		pinctrl-0 = <&backlight_en_default>;
+		pinctrl-names = "default";
+	};
+
+	clk_pwm: pwm {
+		compatible = "clk-pwm";
+		#pwm-cells = <2>;
+
+		clocks = <&gcc GCC_GP2_CLK>;
+
+		pinctrl-0 = <&backlight_pwm_default>;
+		pinctrl-names = "default";
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -66,6 +90,19 @@
 		pinctrl-0 = <&motor_en_default>;
 		pinctrl-names = "default";
 	};
+
+	reg_vdd_tsp_a: regulator-vdd-tsp-a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_tsp_a";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&tsp_en_default>;
+		pinctrl-names = "default";
+	};
 };
 
 &blsp_i2c1 {
@@ -94,6 +131,26 @@
 	};
 };
 
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen: touchscreen@20 {
+		compatible = "zinitix,bt541";
+		reg = <0x20>;
+
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <540>;
+		touchscreen-size-y = <960>;
+
+		vcca-supply = <&reg_vdd_tsp_a>;
+		vdd-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&tsp_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
 &blsp_uart2 {
 	status = "okay";
 };
@@ -166,6 +223,18 @@
 };
 
 &tlmm {
+	backlight_en_default: backlight-en-default-state {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	backlight_pwm_default: backlight-pwm-default-state {
+		pins = "gpio50";
+		function = "gcc_gp2_clk_a";
+	};
+
 	fg_alert_default: fg-alert-default-state {
 		pins = "gpio121";
 		function = "gpio";
@@ -200,4 +269,18 @@
 		drive-strength = <2>;
 		bias-disable;
 	};
+
+	tsp_en_default: tsp-en-default-state {
+		pins = "gpio73";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_default: tsp-int-default-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
 };

diff --git a/src/arm64/qcom/msm8916-samsung-rossa-common.dtsi b/src/arm64/qcom/msm8916-samsung-rossa-common.dtsi
index 4284377..b438fa8 100644
--- a/src/arm64/qcom/msm8916-samsung-rossa-common.dtsi
+++ b/src/arm64/qcom/msm8916-samsung-rossa-common.dtsi

@@ -5,6 +5,9 @@
 /* SM5504 MUIC instead of SM5502 */
 /delete-node/ &muic;
 
+/* Touchscreen varies depending on model variant */
+/delete-node/ &touchscreen;
+
 &blsp_i2c1 {
 	muic: extcon@14 {
 		compatible = "siliconmitus,sm5504-muic";
@@ -14,3 +17,12 @@
 		pinctrl-names = "default";
 	};
 };
+
+/* On rossa backlight is controlled with MIPI DCS commands */
+&clk_pwm {
+	status = "disabled";
+};
+
+&clk_pwm_backlight {
+	status = "disabled";
+};

diff --git a/src/arm64/qcom/msm8939-samsung-a7.dts b/src/arm64/qcom/msm8939-samsung-a7.dts
index aa6c394..0c599e7 100644
--- a/src/arm64/qcom/msm8939-samsung-a7.dts
+++ b/src/arm64/qcom/msm8939-samsung-a7.dts

@@ -286,6 +286,12 @@
 
 		pinctrl-0 = <&muic_int_default>;
 		pinctrl-names = "default";
+
+		usb_con: connector {
+			compatible = "usb-b-connector";
+			label = "micro-USB";
+			type = "micro";
+		};
 	};
 };
 

diff --git a/src/arm64/qcom/msm8953.dtsi b/src/arm64/qcom/msm8953.dtsi
index f1011bb..5d818fe 100644
--- a/src/arm64/qcom/msm8953.dtsi
+++ b/src/arm64/qcom/msm8953.dtsi

@@ -1323,6 +1323,20 @@
 				snps,hird-threshold = /bits/ 8 <0x00>;
 
 				maximum-speed = "high-speed";
+
+				usb-role-switch;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_dwc3_hs: endpoint {
+						};
+					};
+				};
 			};
 		};
 

diff --git a/src/arm64/qcom/msm8996.dtsi b/src/arm64/qcom/msm8996.dtsi
index 1601e46..8d2cb6f 100644
--- a/src/arm64/qcom/msm8996.dtsi
+++ b/src/arm64/qcom/msm8996.dtsi

@@ -1929,6 +1929,16 @@
 						"cfg",
 						"bus_master",
 						"bus_slave";
+
+				pcie@0 {
+					device_type = "pci";
+					reg = <0x0 0x0 0x0 0x0 0x0>;
+					bus-range = <0x01 0xff>;
+
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
+				};
 			};
 
 			pcie1: pcie@608000 {
@@ -1982,6 +1992,16 @@
 						"cfg",
 						"bus_master",
 						"bus_slave";
+
+				pcie@0 {
+					device_type = "pci";
+					reg = <0x0 0x0 0x0 0x0 0x0>;
+					bus-range = <0x01 0xff>;
+
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
+				};
 			};
 
 			pcie2: pcie@610000 {
@@ -2032,6 +2052,16 @@
 						"cfg",
 						"bus_master",
 						"bus_slave";
+
+				pcie@0 {
+					device_type = "pci";
+					reg = <0x0 0x0 0x0 0x0 0x0>;
+					bus-range = <0x01 0xff>;
+
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
+				};
 			};
 		};
 

diff --git a/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi b/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi
index 876c692..d8cc0d7 100644
--- a/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi

@@ -98,30 +98,35 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 		label = "Side buttons";
+		pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &vol_up_n>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vol_down_n &focus_n &snapshot_n>;
-		button-vol-down {
-			label = "Volume Down";
-			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_KEY>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			wakeup-source;
+		button-camera-focus {
+			label = "Camera Focus";
+			gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA_FOCUS>;
 			debounce-interval = <15>;
 		};
 
 		button-camera-snapshot {
 			label = "Camera Snapshot";
 			gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_KEY>;
 			linux,code = <KEY_CAMERA>;
 			debounce-interval = <15>;
 		};
 
-		button-camera-focus {
-			label = "Camera Focus";
-			gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_KEY>;
-			linux,code = <KEY_CAMERA_FOCUS>;
+		button-vol-down {
+			label = "Volume Down";
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
 			debounce-interval = <15>;
 		};
 	};
@@ -345,6 +350,14 @@
 		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
 	};
 
+	vol_up_n: vol-up-n-state {
+		pins = "gpio6";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+
 	focus_n: focus-n-state {
 		pins = "gpio7";
 		function = PMIC_GPIO_FUNC_NORMAL;
@@ -405,9 +418,33 @@
 	};
 };
 
-&pm8998_resin {
-	linux,code = <KEY_VOLUMEUP>;
+&pmi8998_lpg {
+	qcom,power-source = <1>;
+
 	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@4 {
+			reg = <4>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
 };
 
 &qusb2phy {

diff --git a/src/arm64/qcom/msm8998.dtsi b/src/arm64/qcom/msm8998.dtsi
index 4dfe2d0..d795b2b 100644
--- a/src/arm64/qcom/msm8998.dtsi
+++ b/src/arm64/qcom/msm8998.dtsi

@@ -972,6 +972,16 @@
 			power-domains = <&gcc PCIE_0_GDSC>;
 			iommu-map = <0x100 &anoc1_smmu 0x1480 1>;
 			perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie_phy: phy@1c06000 {

diff --git a/src/arm64/qcom/pm6150.dtsi b/src/arm64/qcom/pm6150.dtsi
index 11158c2..6de6ed5 100644
--- a/src/arm64/qcom/pm6150.dtsi
+++ b/src/arm64/qcom/pm6150.dtsi

@@ -64,15 +64,15 @@
 		};
 
 		pm6150_vbus: usb-vbus-regulator@1100 {
-			compatible = "qcom,pm6150-vbus-reg,
-				      qcom,pm8150b-vbus-reg";
+			compatible = "qcom,pm6150-vbus-reg",
+				     "qcom,pm8150b-vbus-reg";
 			reg = <0x1100>;
 			status = "disabled";
 		};
 
 		pm6150_typec: typec@1500 {
-			compatible = "qcom,pm6150-typec,
-				      qcom,pm8150b-typec";
+			compatible = "qcom,pm6150-typec",
+				     "qcom,pm8150b-typec";
 			reg = <0x1500>, <0x1700>;
 			interrupts = <0x0 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
 				     <0x0 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,

diff --git a/src/arm64/qcom/pm6150l.dtsi b/src/arm64/qcom/pm6150l.dtsi
index d13a1ab..0fce452 100644
--- a/src/arm64/qcom/pm6150l.dtsi
+++ b/src/arm64/qcom/pm6150l.dtsi

@@ -118,6 +118,16 @@
 			status = "disabled";
 		};
 
+		pm6150l_lpg: pwm {
+			compatible = "qcom,pm6150l-lpg", "qcom,pm8150l-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
 		pm6150l_wled: leds@d800 {
 			compatible = "qcom,pm6150l-wled";
 			reg = <0xd800>, <0xd900>;

diff --git a/src/arm64/qcom/qcm2290.dtsi b/src/arm64/qcom/qcm2290.dtsi
index 89beac8..106110a 100644
--- a/src/arm64/qcom/qcm2290.dtsi
+++ b/src/arm64/qcom/qcm2290.dtsi

@@ -165,7 +165,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
@@ -694,10 +694,31 @@
 			clock-output-names = "usb3_phy_pipe_clk_src";
 
 			#phy-cells = <0>;
+			orientation-switch;
 
 			qcom,tcsr-reg = <&tcsr_regs 0xb244>;
 
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_dwc3_ss>;
+					};
+				};
+			};
 		};
 
 		system_noc: interconnect@1880000 {
@@ -1380,6 +1401,27 @@
 				snps,usb3_lpm_capable;
 				maximum-speed = "super-speed";
 				dr_mode = "otg";
+				usb-role-switch;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_qmpphy_usb_ss_in>;
+						};
+					};
+				};
 			};
 		};
 
@@ -1858,7 +1900,7 @@
 			compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw";
 			reg = <0x0 0x0f521000 0x0 0x1000>;
 			reg-names = "freq-domain0";
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&lmh_cluster 0>;
 			interrupt-names = "dcvsh-irq-0";
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
 			clock-names = "xo", "alternate";
@@ -1866,6 +1908,18 @@
 			#freq-domain-cells = <1>;
 			#clock-cells = <1>;
 		};
+
+		lmh_cluster: lmh@f550800 {
+			compatible = "qcom,qcm2290-lmh", "qcom,sm8150-lmh";
+			reg = <0x0 0x0f550800 0x0 0x400>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			cpus = <&CPU0>;
+			qcom,lmh-temp-arm-millicelsius = <65000>;
+			qcom,lmh-temp-low-millicelsius = <94500>;
+			qcom,lmh-temp-high-millicelsius = <95000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
 	};
 
 	thermal-zones {

diff --git a/src/arm64/qcom/qcm6490-fairphone-fp5.dts b/src/arm64/qcom/qcm6490-fairphone-fp5.dts
index 4ff9fc2..f343270 100644
--- a/src/arm64/qcom/qcm6490-fairphone-fp5.dts
+++ b/src/arm64/qcom/qcm6490-fairphone-fp5.dts

@@ -77,6 +77,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>;
+
 		connector@0 {
 			compatible = "usb-c-connector";
 			reg = <0>;

diff --git a/src/arm64/qcom/qcm6490-idp.dts b/src/arm64/qcom/qcm6490-idp.dts
index e4bfad5..47ca2d0 100644
--- a/src/arm64/qcom/qcm6490-idp.dts
+++ b/src/arm64/qcom/qcm6490-idp.dts

@@ -9,7 +9,9 @@
 #define PM7250B_SID 8
 #define PM7250B_SID1 9
 
+#include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sc7280.dtsi"
 #include "pm7250b.dtsi"
@@ -35,10 +37,45 @@
 		serial0 = &uart5;
 	};
 
+	pm8350c_pwm_backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pm8350c_pwm 3 65535>;
+		enable-gpios = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pmic_lcd_bl_en>;
+		pinctrl-names = "default";
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	lcd_disp_bias: regulator-lcd-disp-bias {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_disp_bias";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		gpio = <&pm7250b_gpios 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&lcd_disp_bias_en>;
+		pinctrl-names = "default";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&key_vol_up_default>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume_up";
+			gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+	};
+
 	reserved-memory {
 		xbl_mem: xbl@80700000 {
 			reg = <0x0 0x80700000 0x0 0x100000>;
@@ -158,129 +195,151 @@
 		vdd-l14-l16-supply = <&vreg_s8b_1p272>;
 
 		vreg_s1b_1p872: smps1 {
+			regulator-name = "vreg_s1b_1p872";
 			regulator-min-microvolt = <1840000>;
 			regulator-max-microvolt = <2040000>;
 		};
 
 		vreg_s2b_0p876: smps2 {
+			regulator-name = "vreg_s2b_0p876";
 			regulator-min-microvolt = <570070>;
 			regulator-max-microvolt = <1050000>;
 		};
 
 		vreg_s7b_0p972: smps7 {
+			regulator-name = "vreg_s7b_0p972";
 			regulator-min-microvolt = <535000>;
 			regulator-max-microvolt = <1120000>;
 		};
 
 		vreg_s8b_1p272: smps8 {
+			regulator-name = "vreg_s8b_1p272";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1500000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
 		};
 
 		vreg_l1b_0p912: ldo1 {
+			regulator-name = "vreg_l1b_0p912";
 			regulator-min-microvolt = <825000>;
 			regulator-max-microvolt = <925000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l2b_3p072: ldo2 {
+			regulator-name = "vreg_l2b_3p072";
 			regulator-min-microvolt = <2700000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l3b_0p504: ldo3 {
+			regulator-name = "vreg_l3b_0p504";
 			regulator-min-microvolt = <312000>;
 			regulator-max-microvolt = <910000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l4b_0p752: ldo4 {
+			regulator-name = "vreg_l4b_0p752";
 			regulator-min-microvolt = <752000>;
 			regulator-max-microvolt = <820000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		reg_l5b_0p752: ldo5 {
+			regulator-name = "reg_l5b_0p752";
 			regulator-min-microvolt = <552000>;
 			regulator-max-microvolt = <832000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
 			regulator-min-microvolt = <1140000>;
 			regulator-max-microvolt = <1260000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7b_2p952: ldo7 {
+			regulator-name = "vreg_l7b_2p952";
 			regulator-min-microvolt = <2400000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l8b_0p904: ldo8 {
+			regulator-name = "vreg_l8b_0p904";
 			regulator-min-microvolt = <870000>;
 			regulator-max-microvolt = <970000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1304000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l11b_1p504: ldo11 {
+			regulator-name = "vreg_l11b_1p504";
 			regulator-min-microvolt = <1504000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l12b_0p751: ldo12 {
+			regulator-name = "vreg_l12b_0p751";
 			regulator-min-microvolt = <751000>;
 			regulator-max-microvolt = <824000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l13b_0p53: ldo13 {
+			regulator-name = "vreg_l13b_0p53";
 			regulator-min-microvolt = <530000>;
 			regulator-max-microvolt = <824000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l14b_1p08: ldo14 {
+			regulator-name = "vreg_l14b_1p08";
 			regulator-min-microvolt = <1080000>;
 			regulator-max-microvolt = <1304000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l15b_0p765: ldo15 {
+			regulator-name = "vreg_l15b_0p765";
 			regulator-min-microvolt = <765000>;
 			regulator-max-microvolt = <1020000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l16b_1p1: ldo16 {
+			regulator-name = "vreg_l16b_1p1";
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1300000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l17b_1p7: ldo17 {
+			regulator-name = "vreg_l17b_1p7";
 			regulator-min-microvolt = <1700000>;
 			regulator-max-microvolt = <1900000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l18b_1p8: ldo18 {
+			regulator-name = "vreg_l18b_1p8";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l19b_1p8: ldo19 {
+			regulator-name = "vreg_l19b_1p8";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -312,116 +371,217 @@
 		vdd-bob-supply = <&vph_pwr>;
 
 		vreg_s1c_2p19: smps1 {
+			regulator-name = "vreg_s1c_2p19";
 			regulator-min-microvolt = <2190000>;
 			regulator-max-microvolt = <2210000>;
 		};
 
 		vreg_s2c_0p752: smps2 {
+			regulator-name = "vreg_s2c_0p752";
 			regulator-min-microvolt = <750000>;
 			regulator-max-microvolt = <800000>;
 		};
 
 		vreg_s5c_0p752: smps5 {
+			regulator-name = "vreg_s5c_0p752";
 			regulator-min-microvolt = <465000>;
 			regulator-max-microvolt = <1050000>;
 		};
 
 		vreg_s7c_0p752: smps7 {
+			regulator-name = "vreg_s7c_0p752";
 			regulator-min-microvolt = <465000>;
 			regulator-max-microvolt = <800000>;
 		};
 
 		vreg_s9c_1p084: smps9 {
+			regulator-name = "vreg_s9c_1p084";
 			regulator-min-microvolt = <1010000>;
 			regulator-max-microvolt = <1170000>;
 		};
 
 		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1980000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l2c_1p62: ldo2 {
+			regulator-name = "vreg_l2c_1p62";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <1980000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l3c_2p8: ldo3 {
+			regulator-name = "vreg_l3c_2p8";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <3540000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l4c_1p62: ldo4 {
+			regulator-name = "vreg_l4c_1p62";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l5c_1p62: ldo5 {
+			regulator-name = "vreg_l5c_1p62";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l6c_2p96: ldo6 {
+			regulator-name = "vreg_l6c_2p96";
 			regulator-min-microvolt = <1650000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c_3p0: ldo7 {
+			regulator-name = "vreg_l7c_3p0";
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l8c_1p62: ldo8 {
+			regulator-name = "vreg_l8c_1p62";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
 			regulator-min-microvolt = <2700000>;
 			regulator-max-microvolt = <35440000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10c_0p88: ldo10 {
+			regulator-name = "vreg_l10c_0p88";
 			regulator-min-microvolt = <720000>;
 			regulator-max-microvolt = <1050000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l11c_2p8: ldo11 {
+			regulator-name = "vreg_l11c_2p8";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l12c_1p65: ldo12 {
+			regulator-name = "vreg_l12c_1p65";
 			regulator-min-microvolt = <1650000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l13c_2p7: ldo13 {
+			regulator-name = "vreg_l13c_2p7";
 			regulator-min-microvolt = <2700000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_bob_3p296: bob {
+			regulator-name = "vreg_bob_3p296";
 			regulator-min-microvolt = <3008000>;
 			regulator-max-microvolt = <3960000>;
 		};
 	};
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi {
+	vdda-supply = <&vreg_l6b_1p2>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "novatek,nt36672e";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>;
+
+		vddi-supply = <&vreg_l8c_1p62>;
+		avdd-supply = <&lcd_disp_bias>;
+		avee-supply = <&lcd_disp_bias>;
+
+		backlight = <&pm8350c_pwm_backlight>;
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi_phy {
+	vdds-supply = <&vreg_l10c_0p88>;
+	status = "okay";
+};
+
+&pm7250b_gpios {
+	lcd_disp_bias_en: lcd-disp-bias-en-state {
+		pins = "gpio2";
+		function = "func1";
+		bias-disable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		input-disable;
+		output-enable;
+		power-source = <0>;
+	};
+};
+
+&pm8350c_gpios {
+	pmic_lcd_bl_en: pmic-lcd-bl-en-state {
+		pins = "gpio7";
+		function = "normal";
+		bias-disable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		output-low;
+		power-source = <0>;
+	};
+
+	pmic_lcd_bl_pwm: pmic-lcd-bl-pwm-state {
+		pins = "gpio8";
+		function = "func1";
+		bias-disable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		output-low;
+		power-source = <0>;
+	};
+};
+
+&pm7325_gpios {
+	key_vol_up_default: key-vol-up-state {
+		pins = "gpio6";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+};
+
 &pm8350c_pwm {
+	pinctrl-0 = <&pmic_lcd_bl_pwm>;
+	pinctrl-names = "default";
 	status = "okay";
 
 	multi-led {
@@ -448,10 +608,39 @@
 	};
 };
 
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	firmware-name = "qcom/qcm6490/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcm6490/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/qcm6490/modem.mbn";
+	status = "okay";
+};
+
+&remoteproc_wpss {
+	firmware-name = "qcom/qcm6490/wpss.mbn";
+	status = "okay";
+};
+
 &sdhc_1 {
 	non-removable;
 	no-sd;

diff --git a/src/arm64/qcom/qcs404-evb.dtsi b/src/arm64/qcom/qcs404-evb.dtsi
index 1065540..a22b450 100644
--- a/src/arm64/qcom/qcs404-evb.dtsi
+++ b/src/arm64/qcom/qcs404-evb.dtsi

@@ -62,7 +62,7 @@
 		vddrf-supply = <&vreg_l1_1p3>;
 		vddch0-supply = <&vdd_ch0_3p3>;
 
-		local-bd-address = [ 02 00 00 00 5a ad ];
+		local-bd-address = [ 00 00 00 00 00 00 ];
 
 		max-speed = <3200000>;
 	};

diff --git a/src/arm64/qcom/qcs404.dtsi b/src/arm64/qcom/qcs404.dtsi
index a05d023..ac451f3 100644
--- a/src/arm64/qcom/qcs404.dtsi
+++ b/src/arm64/qcom/qcs404.dtsi

@@ -1516,6 +1516,16 @@
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 	};
 

diff --git a/src/arm64/qcom/qcs6490-rb3gen2.dts b/src/arm64/qcom/qcs6490-rb3gen2.dts
index 97824c7..a085ff5 100644
--- a/src/arm64/qcom/qcs6490-rb3gen2.dts
+++ b/src/arm64/qcom/qcs6490-rb3gen2.dts

@@ -17,7 +17,6 @@
 #include "pmk8350.dtsi"
 
 /delete-node/ &ipa_fw_mem;
-/delete-node/ &remoteproc_mpss;
 /delete-node/ &rmtfs_mem;
 /delete-node/ &adsp_mem;
 /delete-node/ &cdsp_mem;
@@ -39,6 +38,20 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	dp-connector {
+		compatible = "dp-connector";
+		label = "DP";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
+
+		port {
+			dp_connector_in: endpoint {
+				remote-endpoint = <&mdss_edp_out>;
+			};
+		};
+	};
+
 	reserved-memory {
 		xbl_mem: xbl@80700000 {
 			reg = <0x0 0x80700000 0x0 0x100000>;
@@ -121,6 +134,49 @@
 		};
 	};
 
+	pmic-glink {
+		compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&redriver_usb_con_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu_in: endpoint {
+						remote-endpoint = <&redriver_usb_con_sbu>;
+					};
+				};
+			};
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -153,129 +209,154 @@
 		vdd-l14-l16-supply = <&vreg_s8b_1p272>;
 
 		vreg_s1b_1p872: smps1 {
+			regulator-name = "vreg_s1b_1p872";
 			regulator-min-microvolt = <1840000>;
 			regulator-max-microvolt = <2040000>;
 		};
 
 		vreg_s2b_0p876: smps2 {
+			regulator-name = "vreg_s2b_0p876";
 			regulator-min-microvolt = <570070>;
 			regulator-max-microvolt = <1050000>;
 		};
 
 		vreg_s7b_0p972: smps7 {
+			regulator-name = "vreg_s7b_0p972";
 			regulator-min-microvolt = <535000>;
 			regulator-max-microvolt = <1120000>;
 		};
 
 		vreg_s8b_1p272: smps8 {
+			regulator-name = "vreg_s8b_1p272";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1500000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
 		};
 
 		vreg_l1b_0p912: ldo1 {
+			regulator-name = "vreg_l1b_0p912";
 			regulator-min-microvolt = <825000>;
 			regulator-max-microvolt = <925000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l2b_3p072: ldo2 {
+			regulator-name = "vreg_l2b_3p072";
 			regulator-min-microvolt = <2700000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l3b_0p504: ldo3 {
+			regulator-name = "vreg_l3b_0p504";
 			regulator-min-microvolt = <312000>;
 			regulator-max-microvolt = <910000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l4b_0p752: ldo4 {
+			regulator-name = "vreg_l4b_0p752";
 			regulator-min-microvolt = <752000>;
 			regulator-max-microvolt = <820000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		reg_l5b_0p752: ldo5 {
+			regulator-name = "reg_l5b_0p752";
 			regulator-min-microvolt = <552000>;
 			regulator-max-microvolt = <832000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
 			regulator-min-microvolt = <1140000>;
 			regulator-max-microvolt = <1260000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7b_2p952: ldo7 {
-			regulator-min-microvolt = <2400000>;
-			regulator-max-microvolt = <3544000>;
+			regulator-name = "vreg_l7b_2p952";
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <2952000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l8b_0p904: ldo8 {
+			regulator-name = "vreg_l8b_0p904";
 			regulator-min-microvolt = <870000>;
 			regulator-max-microvolt = <970000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
 			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1304000>;
+			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l11b_1p504: ldo11 {
+			regulator-name = "vreg_l11b_1p504";
 			regulator-min-microvolt = <1504000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l12b_0p751: ldo12 {
+			regulator-name = "vreg_l12b_0p751";
 			regulator-min-microvolt = <751000>;
 			regulator-max-microvolt = <824000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l13b_0p53: ldo13 {
+			regulator-name = "vreg_l13b_0p53";
 			regulator-min-microvolt = <530000>;
 			regulator-max-microvolt = <824000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l14b_1p08: ldo14 {
+			regulator-name = "vreg_l14b_1p08";
 			regulator-min-microvolt = <1080000>;
 			regulator-max-microvolt = <1304000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l15b_0p765: ldo15 {
+			regulator-name = "vreg_l15b_0p765";
 			regulator-min-microvolt = <765000>;
 			regulator-max-microvolt = <1020000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l16b_1p1: ldo16 {
+			regulator-name = "vreg_l16b_1p1";
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1300000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l17b_1p7: ldo17 {
+			regulator-name = "vreg_l17b_1p7";
 			regulator-min-microvolt = <1700000>;
 			regulator-max-microvolt = <1900000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l18b_1p8: ldo18 {
+			regulator-name = "vreg_l18b_1p8";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l19b_1p8: ldo19 {
+			regulator-name = "vreg_l19b_1p8";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -304,109 +385,128 @@
 		vdd-bob-supply = <&vph_pwr>;
 
 		vreg_s1c_2p19: smps1 {
+			regulator-name = "vreg_s1c_2p19";
 			regulator-min-microvolt = <2190000>;
 			regulator-max-microvolt = <2210000>;
 		};
 
 		vreg_s2c_0p752: smps2 {
+			regulator-name = "vreg_s2c_0p752";
 			regulator-min-microvolt = <750000>;
 			regulator-max-microvolt = <800000>;
 		};
 
 		vreg_s5c_0p752: smps5 {
+			regulator-name = "vreg_s5c_0p752";
 			regulator-min-microvolt = <465000>;
 			regulator-max-microvolt = <1050000>;
 		};
 
 		vreg_s7c_0p752: smps7 {
+			regulator-name = "vreg_s7c_0p752";
 			regulator-min-microvolt = <465000>;
 			regulator-max-microvolt = <800000>;
 		};
 
 		vreg_s9c_1p084: smps9 {
+			regulator-name = "vreg_s9c_1p084";
 			regulator-min-microvolt = <1010000>;
 			regulator-max-microvolt = <1170000>;
 		};
 
 		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1980000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l2c_1p62: ldo2 {
+			regulator-name = "vreg_l2c_1p62";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <1980000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l3c_2p8: ldo3 {
+			regulator-name = "vreg_l3c_2p8";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <3540000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l4c_1p62: ldo4 {
+			regulator-name = "vreg_l4c_1p62";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l5c_1p62: ldo5 {
+			regulator-name = "vreg_l5c_1p62";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l6c_2p96: ldo6 {
+			regulator-name = "vreg_l6c_2p96";
 			regulator-min-microvolt = <1650000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c_3p0: ldo7 {
+			regulator-name = "vreg_l7c_3p0";
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l8c_1p62: ldo8 {
+			regulator-name = "vreg_l8c_1p62";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
 			regulator-min-microvolt = <2700000>;
 			regulator-max-microvolt = <35440000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10c_0p88: ldo10 {
+			regulator-name = "vreg_l10c_0p88";
 			regulator-min-microvolt = <720000>;
 			regulator-max-microvolt = <1050000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l11c_2p8: ldo11 {
+			regulator-name = "vreg_l11c_2p8";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l12c_1p65: ldo12 {
+			regulator-name = "vreg_l12c_1p65";
 			regulator-min-microvolt = <1650000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l13c_2p7: ldo13 {
+			regulator-name = "vreg_l13c_2p7";
 			regulator-min-microvolt = <2700000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_bob_3p296: bob {
+			regulator-name = "vreg_bob_3p296";
 			regulator-min-microvolt = <3008000>;
 			regulator-max-microvolt = <3960000>;
 		};
@@ -430,10 +530,102 @@
 			   <GCC_WPSS_RSCP_CLK>;
 };
 
+&i2c1 {
+	status = "okay";
+
+	typec-mux@1c {
+		compatible = "onnn,nb7vpq904m";
+		reg = <0x1c>;
+
+		vcc-supply = <&vreg_l18b_1p8>;
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				redriver_usb_con_ss: endpoint {
+					remote-endpoint = <&pmic_glink_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				redriver_phy_con_ss: endpoint {
+					remote-endpoint = <&usb_dp_qmpphy_out>;
+					data-lanes = <0 1 2 3>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				redriver_usb_con_sbu: endpoint {
+					remote-endpoint = <&pmic_glink_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp {
+	status = "okay";
+};
+
+&mdss_dp_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+};
+
+&mdss_edp {
+	status = "okay";
+};
+
+&mdss_edp_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&dp_connector_in>;
+};
+
+&mdss_edp_phy {
+	status = "okay";
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	firmware-name = "qcom/qcs6490/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcs6490/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/qcs6490/modem.mdt";
+	status = "okay";
+};
+
+&remoteproc_wpss {
+	firmware-name = "qcom/qcs6490/wpss.mbn";
+	status = "okay";
+};
+
 &tlmm {
 	gpio-reserved-ranges = <32 2>, /* ADSP */
 			       <48 4>; /* NFC */
@@ -449,7 +641,16 @@
 };
 
 &usb_1_dwc3 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
 };
 
 &usb_1_hsphy {
@@ -464,9 +665,49 @@
 	vdda-phy-supply = <&vreg_l6b_1p2>;
 	vdda-pll-supply = <&vreg_l1b_0p912>;
 
+	orientation-switch;
+
 	status = "okay";
 };
 
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&redriver_phy_con_ss>;
+};
+
+&usb_dp_qmpphy_usb_ss_in {
+	remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
+&usb_dp_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp_out>;
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l7b_2p952>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+	vccq2-supply = <&vreg_l9b_1p2>;
+	vccq2-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
 &wifi {
 	memory-region = <&wlan_fw_mem>;
 };
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&edp_hot_plug_det {
+	function = "gpio";
+	bias-disable;
+};

diff --git a/src/arm64/qcom/qdu1000.dtsi b/src/arm64/qcom/qdu1000.dtsi
index 832f472..f90f03f 100644
--- a/src/arm64/qcom/qdu1000.dtsi
+++ b/src/arm64/qcom/qdu1000.dtsi

@@ -177,7 +177,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a55-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
@@ -1459,9 +1459,23 @@
 
 		system-cache-controller@19200000 {
 			compatible = "qcom,qdu1000-llcc";
-			reg = <0 0x19200000 0 0xd80000>,
+			reg = <0 0x19200000 0 0x80000>,
+			      <0 0x19300000 0 0x80000>,
+			      <0 0x19600000 0 0x80000>,
+			      <0 0x19700000 0 0x80000>,
+			      <0 0x19a00000 0 0x80000>,
+			      <0 0x19b00000 0 0x80000>,
+			      <0 0x19e00000 0 0x80000>,
+			      <0 0x19f00000 0 0x80000>,
 			      <0 0x1a200000 0 0x80000>;
 			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc4_base",
+				    "llcc5_base",
+				    "llcc6_base",
+				    "llcc7_base",
 				    "llcc_broadcast_base";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		};

diff --git a/src/arm64/qcom/qrb2210-rb1.dts b/src/arm64/qcom/qrb2210-rb1.dts
index 6e9dd03..bb519142 100644
--- a/src/arm64/qcom/qrb2210-rb1.dts
+++ b/src/arm64/qcom/qrb2210-rb1.dts

@@ -262,6 +262,46 @@
 	status = "okay";
 };
 
+&pm4125_typec {
+	status = "okay";
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "dual";
+		data-role = "dual";
+		self-powered;
+
+		typec-power-opmode = "default";
+		pd-disable;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				pm4125_hs_in: endpoint {
+					remote-endpoint = <&usb_dwc3_hs>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				pm4125_ss_in: endpoint {
+					remote-endpoint = <&usb_qmpphy_out>;
+				};
+			};
+		};
+	};
+};
+
+&pm4125_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <500000>;
+	status = "okay";
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -535,16 +575,10 @@
 	status = "okay";
 };
 
-&usb_qmpphy {
-	vdda-phy-supply = <&pm4125_l12>;
-	vdda-pll-supply = <&pm4125_l13>;
-	status = "okay";
+&usb_dwc3_hs {
+	remote-endpoint = <&pm4125_hs_in>;
 };
 
-&usb_dwc3 {
-	dr_mode = "host";
-};
-
 &usb_hsphy {
 	vdd-supply = <&pm4125_l12>;
 	vdda-pll-supply = <&pm4125_l13>;
@@ -552,12 +586,23 @@
 	status = "okay";
 };
 
+&usb_qmpphy {
+	vdda-phy-supply = <&pm4125_l12>;
+	vdda-pll-supply = <&pm4125_l13>;
+	status = "okay";
+};
+
+&usb_qmpphy_out {
+	remote-endpoint = <&pm4125_ss_in>;
+};
+
 &wifi {
 	vdd-0.8-cx-mx-supply = <&pm4125_l7>;
 	vdd-1.8-xo-supply = <&pm4125_l13>;
 	vdd-1.3-rfa-supply = <&pm4125_l10>;
 	vdd-3.3-ch0-supply = <&pm4125_l22>;
 	qcom,ath10k-calibration-variant = "Thundercomm_RB1";
+	firmware-name = "qcm2290";
 	status = "okay";
 };
 

diff --git a/src/arm64/qcom/qrb4210-rb2.dts b/src/arm64/qcom/qrb4210-rb2.dts
index 696d6d4..2c39bb1 100644
--- a/src/arm64/qcom/qrb4210-rb2.dts
+++ b/src/arm64/qcom/qrb4210-rb2.dts

@@ -678,6 +678,7 @@
 	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 	vdd-3.3-ch0-supply = <&vreg_l23a_3p3>;
 	qcom,ath10k-calibration-variant = "Thundercomm_RB2";
+	firmware-name = "qrb4210";
 
 	status = "okay";
 };

diff --git a/src/arm64/qcom/sa8155p-adp.dts b/src/arm64/qcom/sa8155p-adp.dts
index b2cf2c9..9e9c7f8 100644
--- a/src/arm64/qcom/sa8155p-adp.dts
+++ b/src/arm64/qcom/sa8155p-adp.dts

@@ -283,7 +283,7 @@
 
 		vreg_l13c_2p96: ldo13 {
 			regulator-name = "vreg_l13c_2p96";
-			regulator-min-microvolt = <2504000>;
+			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};

diff --git a/src/arm64/qcom/sa8775p.dtsi b/src/arm64/qcom/sa8775p.dtsi
index 231cea1..1b3dc0e 100644
--- a/src/arm64/qcom/sa8775p.dtsi
+++ b/src/arm64/qcom/sa8775p.dtsi

@@ -3605,7 +3605,7 @@
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	pcie0: pcie@1c00000 {
@@ -3677,6 +3677,16 @@
 		phy-names = "pciephy";
 
 		status = "disabled";
+
+		pcie@0 {
+			device_type = "pci";
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			bus-range = <0x01 0xff>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+		};
 	};
 
 	pcie0_phy: phy@1c04000 {
@@ -3777,6 +3787,16 @@
 		phy-names = "pciephy";
 
 		status = "disabled";
+
+		pcie@0 {
+			device_type = "pci";
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			bus-range = <0x01 0xff>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+		};
 	};
 
 	pcie1_phy: phy@1c14000 {

diff --git a/src/arm64/qcom/sc7180-acer-aspire1.dts b/src/arm64/qcom/sc7180-acer-aspire1.dts
index 5afcb82..3f0d3e3 100644
--- a/src/arm64/qcom/sc7180-acer-aspire1.dts
+++ b/src/arm64/qcom/sc7180-acer-aspire1.dts

@@ -255,7 +255,25 @@
 	clock-frequency = <400000>;
 	status = "okay";
 
-	/* embedded-controller@76 */
+	embedded-controller@76 {
+		compatible = "acer,aspire1-ec";
+		reg = <0x76>;
+
+		interrupts-extended = <&tlmm 30 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ec_int_default>;
+		pinctrl-names = "default";
+
+		connector {
+			compatible = "usb-c-connector";
+
+			port {
+				ec_dp_in: endpoint {
+					remote-endpoint = <&mdss_dp_out>;
+				};
+			};
+		};
+	};
 };
 
 &i2c4 {
@@ -419,6 +437,19 @@
 	status = "okay";
 };
 
+&mdss_dp {
+	data-lanes = <0 1>;
+
+	vdda-1p2-supply = <&vreg_l3c_1p2>;
+	vdda-0p9-supply = <&vreg_l4a_0p8>;
+
+	status = "okay";
+};
+
+&mdss_dp_out {
+	remote-endpoint = <&ec_dp_in>;
+};
+
 &mdss_dsi0 {
 	vdda-supply = <&vreg_l3c_1p2>;
 	status = "okay";
@@ -857,6 +888,13 @@
 		bias-disable;
 	};
 
+	ec_int_default: ec-int-default-state {
+		pins = "gpio30";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	edp_bridge_irq_default: edp-bridge-irq-default-state {
 		pins = "gpio11";
 		function = "gpio";

diff --git a/src/arm64/qcom/sc7180-trogdor.dtsi b/src/arm64/qcom/sc7180-trogdor.dtsi
index 5260c63..8513be2 100644
--- a/src/arm64/qcom/sc7180-trogdor.dtsi
+++ b/src/arm64/qcom/sc7180-trogdor.dtsi

@@ -1167,6 +1167,7 @@
 };
 
 &pm6150l_gpios {
+	status = "disabled"; /* No GPIOs are consumed or configured */
 	gpio-line-names = "AP_SUSPEND",
 			  "",
 			  "",

diff --git a/src/arm64/qcom/sc7180.dtsi b/src/arm64/qcom/sc7180.dtsi
index 2b481e2..4774a85 100644
--- a/src/arm64/qcom/sc7180.dtsi
+++ b/src/arm64/qcom/sc7180.dtsi

@@ -1585,9 +1585,12 @@
 			compatible = "qcom,sc7180-qmp-ufs-phy",
 				     "qcom,sm7150-qmp-ufs-phy";
 			reg = <0 0x01d87000 0 0x1000>;
-			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-			clock-names = "ref", "ref_aux";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_MEM_CLKREF_CLK>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
 			power-domains = <&gcc UFS_PHY_GDSC>;
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
@@ -2309,6 +2312,7 @@
 			compatible = "qcom,sc7180-dcc", "qcom,dcc";
 			reg = <0x0 0x010a2000 0x0 0x1000>,
 			      <0x0 0x010ae000 0x0 0x2000>;
+			status = "disabled";
 		};
 
 		stm@6002000 {

diff --git a/src/arm64/qcom/sc7280.dtsi b/src/arm64/qcom/sc7280.dtsi
index 41f51d3..fc9ec36 100644
--- a/src/arm64/qcom/sc7280.dtsi
+++ b/src/arm64/qcom/sc7280.dtsi

@@ -2273,6 +2273,16 @@
 				    <0x100 &apps_smmu 0x1c81 0x1>;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie1_phy: phy@1c0e000 {
@@ -2352,6 +2362,8 @@
 				<0 0>,
 				<0 0>,
 				<0 0>;
+			qcom,ice = <&ice>;
+
 			status = "disabled";
 		};
 
@@ -2374,6 +2386,13 @@
 			status = "disabled";
 		};
 
+		ice: crypto@1d88000 {
+			compatible = "qcom,sc7280-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0 0x01d88000 0 0x8000>;
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
 		cryptobam: dma-controller@1dc4000 {
 			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
 			reg = <0x0 0x01dc4000 0x0 0x28000>;
@@ -4458,6 +4477,11 @@
 						opp-hz = /bits/ 64 <506666667>;
 						required-opps = <&rpmhpd_opp_nom>;
 					};
+
+					opp-608000000 {
+						opp-hz = /bits/ 64 <608000000>;
+						required-opps = <&rpmhpd_opp_turbo>;
+					};
 				};
 			};
 

diff --git a/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts b/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts
index 0c22f3e..6af9911 100644
--- a/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts
+++ b/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts

@@ -51,6 +51,8 @@
 
 		#address-cells = <1>;
 		#size-cells = <0>;
+		orientation-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 58 GPIO_ACTIVE_HIGH>;
 
 		connector@0 {
 			compatible = "usb-c-connector";
@@ -329,12 +331,18 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l10e_2p9: ldo10 {
 			regulator-min-microvolt = <2904000>;
 			regulator-max-microvolt = <2904000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l16e_3p0: ldo16 {
@@ -350,49 +358,58 @@
 
 	zap-shader {
 		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn";
+		firmware-name = "qcom/sc8180x/LENOVO/82AK/qcdxkmsuc8180.mbn";
 	};
 };
 
 &i2c1 {
 	clock-frequency = <100000>;
 
-	pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>;
+	pinctrl-0 = <&i2c1_active>;
 	pinctrl-names = "default";
 
 	status = "okay";
 
-	hid@10 {
+	touchscreen@10 {
 		compatible = "hid-over-i2c";
 		reg = <0x10>;
 		hid-descr-addr = <0x1>;
 
 		interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ts_int_default>;
+		pinctrl-names = "default";
 	};
 };
 
 &i2c7 {
-	clock-frequency = <100000>;
+	clock-frequency = <1000000>;
 
-	pinctrl-0 = <&i2c7_active>, <&i2c7_hid_active>;
+	pinctrl-0 = <&i2c7_active>;
 	pinctrl-names = "default";
 
 	status = "okay";
 
-	hid@5 {
+	keyboard@5 {
 		compatible = "hid-over-i2c";
 		reg = <0x5>;
 		hid-descr-addr = <0x20>;
 
 		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&kb_int_default>;
+		pinctrl-names = "default";
 	};
 
-	hid@2c {
+	touchpad@2c {
 		compatible = "hid-over-i2c";
 		reg = <0x2c>;
 		hid-descr-addr = <0x20>;
 
 		interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&tp_int_default>;
+		pinctrl-names = "default";
 	};
 };
 
@@ -669,14 +686,6 @@
 		drive-strength = <2>;
 	};
 
-	i2c1_hid_active: i2c1-hid-active-state {
-		pins = "gpio122";
-		function = "gpio";
-
-		bias-pull-up;
-		drive-strength = <2>;
-	};
-
 	i2c7_active: i2c7-active-state {
 		pins = "gpio98", "gpio99";
 		function = "qup7";
@@ -685,8 +694,8 @@
 		drive-strength = <2>;
 	};
 
-	i2c7_hid_active: i2c7-hid-active-state {
-		pins = "gpio37", "gpio24";
+	kb_int_default: kb-int-default-state {
+		pins = "gpio37";
 		function = "gpio";
 
 		bias-pull-up;
@@ -718,6 +727,22 @@
 		};
 	};
 
+	tp_int_default: tp-int-default-state {
+		pins = "gpio24";
+		function = "gpio";
+
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio122";
+		function = "gpio";
+
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
 	usbprim_sbu_default: usbprim-sbu-state {
 		oe-n-pins {
 			pins = "gpio152";

diff --git a/src/arm64/qcom/sc8180x.dtsi b/src/arm64/qcom/sc8180x.dtsi
index 053f786..581a70c 100644
--- a/src/arm64/qcom/sc8180x.dtsi
+++ b/src/arm64/qcom/sc8180x.dtsi

@@ -1777,6 +1777,16 @@
 			dma-coherent;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie0_phy: phy@1c06000 {
@@ -1888,6 +1898,16 @@
 			dma-coherent;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie3_phy: phy@1c0c000 {
@@ -2000,6 +2020,16 @@
 			dma-coherent;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie1_phy: phy@1c16000 {
@@ -2112,6 +2142,16 @@
 			dma-coherent;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie2_phy: phy@1c1c000 {
@@ -2225,7 +2265,6 @@
 
 		gpu: gpu@2c00000 {
 			compatible = "qcom,adreno-680.1", "qcom,adreno";
-			#stream-id-cells = <16>;
 
 			reg = <0 0x02c00000 0 0x40000>;
 			reg-names = "kgsl_3d0_reg_memory";
@@ -2608,11 +2647,14 @@
 
 		system-cache-controller@9200000 {
 			compatible = "qcom,sc8180x-llcc";
-			reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>,
-			      <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>,
-			      <0 0x09600000 0 0x50000>;
+			reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
+			      <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>,
+			      <0 0x09400000 0 0x58000>, <0 0x09480000 0 0x58000>,
+			      <0 0x09500000 0 0x58000>, <0 0x09580000 0 0x58000>,
+			      <0 0x09600000 0 0x58000>;
 			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
-				    "llcc3_base", "llcc_broadcast_base";
+				    "llcc3_base", "llcc4_base", "llcc5_base",
+				    "llcc6_base", "llcc7_base",  "llcc_broadcast_base";
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -2805,7 +2847,7 @@
 				power-domains = <&rpmhpd SC8180X_MMCX>;
 
 				interrupt-parent = <&mdss>;
-				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <0>;
 
 				ports {
 					#address-cells = <1>;
@@ -2878,7 +2920,7 @@
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <4>;
 
 				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
 					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
@@ -2964,7 +3006,7 @@
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <5>;
 
 				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
 					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
@@ -3030,7 +3072,8 @@
 				reg = <0 0xae90000 0 0x200>,
 				      <0 0xae90200 0 0x200>,
 				      <0 0xae90400 0 0x600>,
-				      <0 0xae90a00 0 0x400>;
+				      <0 0xae90a00 0 0x400>,
+				      <0 0xae91000 0 0x400>;
 				interrupt-parent = <&mdss>;
 				interrupts = <12>;
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
@@ -3106,7 +3149,8 @@
 				reg = <0 0xae98000 0 0x200>,
 				      <0 0xae98200 0 0x200>,
 				      <0 0xae98400 0 0x600>,
-				      <0 0xae98a00 0 0x400>;
+				      <0 0xae98a00 0 0x400>,
+				      <0 0xae99000 0 0x400>;
 				interrupt-parent = <&mdss>;
 				interrupts = <13>;
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,

diff --git a/src/arm64/qcom/sc8280xp-crd.dts b/src/arm64/qcom/sc8280xp-crd.dts
index 4121556..372b35f 100644
--- a/src/arm64/qcom/sc8280xp-crd.dts
+++ b/src/arm64/qcom/sc8280xp-crd.dts

@@ -977,8 +977,7 @@
 		reset-n-pins {
 			pins = "gpio99";
 			function = "gpio";
-			output-high;
-			drive-strength = <16>;
+			bias-disable;
 		};
 	};
 

diff --git a/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 15ae94c..4bf99b6 100644
--- a/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts

@@ -100,6 +100,8 @@
 
 		#address-cells = <1>;
 		#size-cells = <0>;
+		orientation-gpios = <&tlmm 166 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 49 GPIO_ACTIVE_HIGH>;
 
 		connector@0 {
 			compatible = "usb-c-connector";
@@ -414,6 +416,13 @@
 			regulator-always-on;
 		};
 
+		vreg_l1b: ldo1 {
+			regulator-name = "vreg_l1b";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l3b: ldo3 {
 			regulator-name = "vreg_l3b";
 			regulator-min-microvolt = <1200000>;
@@ -464,6 +473,13 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l12c: ldo12 {
 			regulator-name = "vreg_l12c";
 			regulator-min-microvolt = <1800000>;
@@ -497,6 +513,13 @@
 		vdd-l6-l9-l10-supply = <&vreg_s12b>;
 		vdd-l8-supply = <&vreg_s12b>;
 
+		vreg_l2d: ldo2 {
+			regulator-name = "vreg_l2d";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l3d: ldo3 {
 			regulator-name = "vreg_l3d";
 			regulator-min-microvolt = <1200000>;
@@ -525,12 +548,26 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vreg_l8d: ldo8 {
+			regulator-name = "vreg_l8d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l9d: ldo9 {
 			regulator-name = "vreg_l9d";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
+
+		vreg_l10d: ldo10 {
+			regulator-name = "vreg_l10d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
 	};
 };
 
@@ -618,15 +655,16 @@
 
 	status = "okay";
 
-	/* FIXME: verify */
 	touchscreen@10 {
-		compatible = "hid-over-i2c";
+		compatible = "elan,ekth5015m", "elan,ekth6915";
 		reg = <0x10>;
 
-		hid-descr-addr = <0x1>;
 		interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
-		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_s10b>;
+		reset-gpios = <&tlmm 99 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		no-reset-on-power-off;
+
+		vcc33-supply = <&vreg_misc_3p3>;
+		vccio-supply = <&vreg_misc_3p3>;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&ts0_default>;
@@ -731,22 +769,14 @@
 	pinctrl-0 = <&pcie4_default>;
 
 	status = "okay";
-
-	pcie@0 {
-		device_type = "pci";
-		reg = <0x0 0x0 0x0 0x0 0x0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		bus-range = <0x01 0xff>;
+};
 
-		wifi@0 {
-			compatible = "pci17cb,1103";
-			reg = <0x10000 0x0 0x0 0x0 0x0>;
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1103";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
 
-			qcom,ath11k-calibration-variant = "LE_X13S";
-		};
+		qcom,ath11k-calibration-variant = "LE_X13S";
 	};
 };
 
@@ -1168,6 +1198,56 @@
 	remote-endpoint = <&pmic_glink_con1_hs>;
 };
 
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_hsphy0 {
+	vdda-pll-supply = <&vreg_l1b>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy1 {
+	vdda-pll-supply = <&vreg_l8d>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy2 {
+	vdda-pll-supply = <&vreg_l10d>;
+	vdda18-supply = <&vreg_l8c>;
+	vdda33-supply = <&vreg_l2d>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy3 {
+	vdda-pll-supply = <&vreg_l10d>;
+	vdda18-supply = <&vreg_l8c>;
+	vdda33-supply = <&vreg_l2d>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy0 {
+	vdda-phy-supply = <&vreg_l1b>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy1 {
+	vdda-phy-supply = <&vreg_l8d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
 &vamacro {
 	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
 	pinctrl-names = "default";
@@ -1417,8 +1497,8 @@
 		reset-n-pins {
 			pins = "gpio99";
 			function = "gpio";
-			output-high;
-			drive-strength = <16>;
+			drive-strength = <2>;
+			bias-disable;
 		};
 	};
 

diff --git a/src/arm64/qcom/sc8280xp.dtsi b/src/arm64/qcom/sc8280xp.dtsi
index d0f82e1..59f0a85 100644
--- a/src/arm64/qcom/sc8280xp.dtsi
+++ b/src/arm64/qcom/sc8280xp.dtsi

@@ -50,7 +50,8 @@
 			reg = <0x0 0x0>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			capacity-dmips-mhz = <602>;
+			capacity-dmips-mhz = <981>;
+			dynamic-power-coefficient = <549>;
 			next-level-cache = <&L2_0>;
 			power-domains = <&CPU_PD0>;
 			power-domain-names = "psci";
@@ -77,7 +78,8 @@
 			reg = <0x0 0x100>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			capacity-dmips-mhz = <602>;
+			capacity-dmips-mhz = <981>;
+			dynamic-power-coefficient = <549>;
 			next-level-cache = <&L2_100>;
 			power-domains = <&CPU_PD1>;
 			power-domain-names = "psci";
@@ -99,7 +101,8 @@
 			reg = <0x0 0x200>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			capacity-dmips-mhz = <602>;
+			capacity-dmips-mhz = <981>;
+			dynamic-power-coefficient = <549>;
 			next-level-cache = <&L2_200>;
 			power-domains = <&CPU_PD2>;
 			power-domain-names = "psci";
@@ -121,7 +124,8 @@
 			reg = <0x0 0x300>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			capacity-dmips-mhz = <602>;
+			capacity-dmips-mhz = <981>;
+			dynamic-power-coefficient = <549>;
 			next-level-cache = <&L2_300>;
 			power-domains = <&CPU_PD3>;
 			power-domain-names = "psci";
@@ -144,6 +148,7 @@
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <590>;
 			next-level-cache = <&L2_400>;
 			power-domains = <&CPU_PD4>;
 			power-domain-names = "psci";
@@ -166,6 +171,7 @@
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <590>;
 			next-level-cache = <&L2_500>;
 			power-domains = <&CPU_PD5>;
 			power-domain-names = "psci";
@@ -188,6 +194,7 @@
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <590>;
 			next-level-cache = <&L2_600>;
 			power-domains = <&CPU_PD6>;
 			power-domain-names = "psci";
@@ -210,6 +217,7 @@
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <590>;
 			next-level-cache = <&L2_700>;
 			power-domains = <&CPU_PD7>;
 			power-domain-names = "psci";
@@ -300,6 +308,7 @@
 		scm: scm {
 			compatible = "qcom,scm-sc8280xp", "qcom,scm";
 			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			qcom,dload-mode = <&tcsr 0x13000>;
 		};
 	};
 
@@ -862,6 +871,18 @@
 			#mbox-cells = <2>;
 		};
 
+		qfprom: efuse@784000 {
+			compatible = "qcom,sc8280xp-qfprom", "qcom,qfprom";
+			reg = <0 0x00784000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpu_speed_bin: gpu-speed-bin@18b {
+				reg = <0x18b 0x1>;
+				bits = <5 3>;
+			};
+		};
+
 		qup2: geniqup@8c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0 0x008c0000 0 0x2000>;
@@ -1731,6 +1752,8 @@
 			linux,pci-domain = <6>;
 			num-lanes = <1>;
 
+			msi-map = <0x0 &its 0xe0000 0x10000>;
+
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
@@ -1780,6 +1803,16 @@
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie4_port0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie4_phy: phy@1c06000 {
@@ -1832,6 +1865,8 @@
 			linux,pci-domain = <5>;
 			num-lanes = <2>;
 
+			msi-map = <0x0 &its 0xd0000 0x10000>;
+
 			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
@@ -1879,6 +1914,16 @@
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie3b_port0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie3b_phy: phy@1c0e000 {
@@ -1931,6 +1976,8 @@
 			linux,pci-domain = <4>;
 			num-lanes = <4>;
 
+			msi-map = <0x0 &its 0xc0000 0x10000>;
+
 			interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
@@ -1978,6 +2025,16 @@
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie3a_port0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie3a_phy: phy@1c14000 {
@@ -2033,6 +2090,8 @@
 			linux,pci-domain = <3>;
 			num-lanes = <2>;
 
+			msi-map = <0x0 &its 0xb0000 0x10000>;
+
 			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
@@ -2080,6 +2139,16 @@
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie2b_port0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie2b_phy: phy@1c1e000 {
@@ -2132,6 +2201,8 @@
 			linux,pci-domain = <2>;
 			num-lanes = <4>;
 
+			msi-map = <0x0 &its 0xa0000 0x10000>;
+
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>,
@@ -2179,6 +2250,16 @@
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie2a_port0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie2a_phy: phy@1c24000 {
@@ -3342,6 +3423,88 @@
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		usb_2: usb@a4f8800 {
+			compatible = "qcom,sc8280xp-dwc3-mp", "qcom,dwc3";
+			reg = <0 0x0a4f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>,
+				 <&gcc GCC_USB30_MP_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>,
+				 <&gcc GCC_USB30_MP_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi",
+				      "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys";
+
+			assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MP_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 857 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 859 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 127 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 126 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 129 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 128 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 131 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 130 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 133 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 132 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 16 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-names = "pwr_event_1", "pwr_event_2",
+					  "pwr_event_3", "pwr_event_4",
+					  "hs_phy_1",	 "hs_phy_2",
+					  "hs_phy_3",	 "hs_phy_4",
+					  "dp_hs_phy_1", "dm_hs_phy_1",
+					  "dp_hs_phy_2", "dm_hs_phy_2",
+					  "dp_hs_phy_3", "dm_hs_phy_3",
+					  "dp_hs_phy_4", "dm_hs_phy_4",
+					  "ss_phy_1",	 "ss_phy_2";
+
+			power-domains = <&gcc USB30_MP_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_MP_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_MP 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_MP 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			wakeup-source;
+
+			status = "disabled";
+
+			usb_2_dwc3: usb@a400000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a400000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x800 0x0>;
+				phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>,
+				       <&usb_2_hsphy1>, <&usb_2_qmpphy1>,
+				       <&usb_2_hsphy2>,
+				       <&usb_2_hsphy3>;
+				phy-names = "usb2-0", "usb3-0",
+					    "usb2-1", "usb3-1",
+					    "usb2-2",
+					    "usb2-3";
+				dr_mode = "host";
+			};
+		};
+
 		usb_0: usb@a6f8800 {
 			compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
@@ -3366,10 +3529,12 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 138 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
 					  "ss_phy_irq";
@@ -3426,10 +3591,12 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 136 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
 					  "ss_phy_irq";
@@ -4453,6 +4620,13 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		restart@c264000 {
+			compatible = "qcom,pshold";
+			reg = <0 0x0c264000 0 0x4>;
+			/* TZ seems to block access */
+			status = "reserved";
+		};
+
 		tsens1: thermal-sensor@c265000 {
 			compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
 			reg = <0 0x0c265000 0 0x1ff>, /* TM */
@@ -4804,7 +4978,7 @@
 			#size-cells = <2>;
 			ranges;
 
-			msi-controller@17a40000 {
+			its: msi-controller@17a40000 {
 				compatible = "arm,gic-v3-its";
 				reg = <0 0x17a40000 0 0x20000>;
 				msi-controller;
@@ -4971,6 +5145,11 @@
 			      <0 0x18592000 0 0x1000>;
 			reg-names = "freq-domain0", "freq-domain1";
 
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0",
+					  "dcvsh-irq-1";
+
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
 			clock-names = "xo", "alternate";
 

diff --git a/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi b/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi
index 819a5f8..a4b722e 100644
--- a/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi

@@ -90,6 +90,8 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
 
 		key-camera-focus {
 			label = "Camera Focus";
@@ -645,6 +647,13 @@
 		bias-disable;
 	};
 
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio64", "gpio113";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
 	imx300_vana_default: imx300-vana-default-state {
 		pins = "gpio50";
 		function = "gpio";

diff --git a/src/arm64/qcom/sdm632-fairphone-fp3.dts b/src/arm64/qcom/sdm632-fairphone-fp3.dts
index 057579a..e2708c7 100644
--- a/src/arm64/qcom/sdm632-fairphone-fp3.dts
+++ b/src/arm64/qcom/sdm632-fairphone-fp3.dts

@@ -116,6 +116,33 @@
 	};
 };
 
+&pmi632_typec {
+	status = "okay";
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "dual";
+		data-role = "dual";
+		self-powered;
+
+		typec-power-opmode = "default";
+		pd-disable;
+
+		port {
+			pmi632_hs_in: endpoint {
+				remote-endpoint = <&usb_dwc3_hs>;
+			};
+		};
+	};
+};
+
+&pmi632_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <1000000>;
+	status = "okay";
+};
+
 &sdhc_1 {
 	status = "okay";
 	vmmc-supply = <&pm8953_l8>;
@@ -240,8 +267,8 @@
 	status = "okay";
 };
 
-&usb3_dwc3 {
-	dr_mode = "peripheral";
+&usb_dwc3_hs {
+	remote-endpoint = <&pmi632_hs_in>;
 };
 
 &wcnss {

diff --git a/src/arm64/qcom/sdm670-google-sargo.dts b/src/arm64/qcom/sdm670-google-sargo.dts
index 32a7bd5..176b011 100644
--- a/src/arm64/qcom/sdm670-google-sargo.dts
+++ b/src/arm64/qcom/sdm670-google-sargo.dts

@@ -441,6 +441,47 @@
 	};
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l1a_1p225>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "samsung,s6e3fa7-ams559nk06";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_default>;
+
+		power-supply = <&vreg_l6b_3p3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1b_0p925>;
+	status = "okay";
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
 &pm660l_gpios {
 	vol_up_pin: vol-up-state {
 		pins = "gpio7";
@@ -481,6 +522,29 @@
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
+	panel_default: panel-default-state {
+		te-pins {
+			pins = "gpio10";
+			function = "mdp_vsync";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		reset-pins {
+			pins = "gpio75";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		mode-pins {
+			pins = "gpio76";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
 	touchscreen_default: ts-default-state {
 		ts-reset-pins {
 			pins = "gpio99";

diff --git a/src/arm64/qcom/sdm845-db845c.dts b/src/arm64/qcom/sdm845-db845c.dts
index 1f51732..9a6d3d0 100644
--- a/src/arm64/qcom/sdm845-db845c.dts
+++ b/src/arm64/qcom/sdm845-db845c.dts

@@ -195,6 +195,12 @@
 
 		gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+		/*
+		 * FIXME: this regulator is responsible for VBUS on the left USB
+		 * port. Keep it always on until we can correctly model this
+		 * relationship.
+		 */
+		regulator-always-on;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pcie0_pwren_state>;

diff --git a/src/arm64/qcom/sdm845.dtsi b/src/arm64/qcom/sdm845.dtsi
index 2f20be9..10de2bd 100644
--- a/src/arm64/qcom/sdm845.dtsi
+++ b/src/arm64/qcom/sdm845.dtsi

@@ -2375,6 +2375,16 @@
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie0_phy: phy@1c06000 {
@@ -2479,6 +2489,16 @@
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie1_phy: phy@1c0a000 {

diff --git a/src/arm64/qcom/sdx75.dtsi b/src/arm64/qcom/sdx75.dtsi
index 7dbdf8c..da17040 100644
--- a/src/arm64/qcom/sdx75.dtsi
+++ b/src/arm64/qcom/sdx75.dtsi

@@ -224,7 +224,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a55-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
@@ -411,7 +411,7 @@
 		hwlocks = <&tcsr_mutex 3>;
 	};
 
-	soc: soc {
+	soc: soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;

diff --git a/src/arm64/qcom/sm6115.dtsi b/src/arm64/qcom/sm6115.dtsi
index aca0a87..9ed0621 100644
--- a/src/arm64/qcom/sm6115.dtsi
+++ b/src/arm64/qcom/sm6115.dtsi

@@ -1090,6 +1090,7 @@
 
 			power-domains = <&rpmpd SM6115_VDDCX>;
 			operating-points-v2 = <&sdhc1_opp_table>;
+			iommus = <&apps_smmu 0x00c0 0x0>;
 			interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
 					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
 					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG

diff --git a/src/arm64/qcom/sm6350.dtsi b/src/arm64/qcom/sm6350.dtsi
index 0be0535..84ff20a 100644
--- a/src/arm64/qcom/sm6350.dtsi
+++ b/src/arm64/qcom/sm6350.dtsi

@@ -1205,6 +1205,37 @@
 			status = "disabled";
 		};
 
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x24000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <16>;
+			qcom,num-ees = <4>;
+			iommus = <&apps_smmu 0x426 0x11>,
+				 <&apps_smmu 0x432 0x0>,
+				 <&apps_smmu 0x436 0x11>,
+				 <&apps_smmu 0x438 0x1>,
+				 <&apps_smmu 0x43f 0x0>;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm6350-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0 0x01dfa000 0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x426 0x11>,
+				 <&apps_smmu 0x432 0x0>,
+				 <&apps_smmu 0x436 0x11>,
+				 <&apps_smmu 0x438 0x1>,
+				 <&apps_smmu 0x43f 0x0>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "memory";
+		};
+
 		ipa: ipa@1e40000 {
 			compatible = "qcom,sm6350-ipa";
 
@@ -2033,6 +2064,14 @@
 							remote-endpoint = <&mdss_dsi0_in>;
 						};
 					};
+
+					port@2 {
+						reg = <2>;
+
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp_in>;
+						};
+					};
 				};
 
 				mdp_opp_table: opp-table {
@@ -2070,6 +2109,86 @@
 				};
 			};
 
+			mdss_dp: displayport-controller@ae90000 {
+				compatible = "qcom,sm6350-dp", "qcom,sm8350-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0x600>,
+				      <0 0xae91000 0 0x400>,
+				      <0 0xae91400 0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SM6350_CX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp_out: endpoint {
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
 			mdss_dsi0: dsi@ae94000 {
 				compatible = "qcom,sm6350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae94000 0 0x400>;

diff --git a/src/arm64/qcom/sm8150-hdk.dts b/src/arm64/qcom/sm8150-hdk.dts
index de670b4..6cb6f50 100644
--- a/src/arm64/qcom/sm8150-hdk.dts
+++ b/src/arm64/qcom/sm8150-hdk.dts

@@ -609,6 +609,11 @@
 	firmware-name = "qcom/sm8150/cdsp.mbn";
 };
 
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8150/modem.mbn";
+	status = "okay";
+};
+
 &remoteproc_slpi {
 	status = "okay";
 
@@ -713,3 +718,14 @@
 &usb_2_dwc3 {
 	dr_mode = "host";
 };
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l1a_0p75>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
+
+	qcom,ath10k-calibration-variant = "Qualcomm_sm8150hdk";
+};

diff --git a/src/arm64/qcom/sm8150.dtsi b/src/arm64/qcom/sm8150.dtsi
index a35c085..ff22e43 100644
--- a/src/arm64/qcom/sm8150.dtsi
+++ b/src/arm64/qcom/sm8150.dtsi

@@ -1901,6 +1901,16 @@
 			pinctrl-0 = <&pcie0_default_state>;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie0_phy: phy@1c06000 {
@@ -2011,6 +2021,16 @@
 			pinctrl-0 = <&pcie1_default_state>;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie1_phy: phy@1c0e000 {

diff --git a/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi b/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi
index 6f54f50..41f1174 100644
--- a/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi

@@ -636,7 +636,8 @@
 	connector {
 		compatible = "usb-c-connector";
 
-		power-role = "source";
+		op-sink-microwatt = <10000000>;
+		power-role = "dual";
 		data-role = "dual";
 		self-powered;
 
@@ -645,6 +646,12 @@
 					 PDO_FIXED_USB_COMM |
 					 PDO_FIXED_DATA_SWAP)>;
 
+		sink-pdos = <PDO_FIXED(5000, 3000,
+				       PDO_FIXED_DUAL_ROLE |
+				       PDO_FIXED_USB_COMM |
+				       PDO_FIXED_DATA_SWAP)
+				       PDO_VAR(5000, 12000, 5000)>;
+
 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -661,6 +668,8 @@
 };
 
 &pm8150b_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <3000000>;
 	status = "okay";
 };
 

diff --git a/src/arm64/qcom/sm8250.dtsi b/src/arm64/qcom/sm8250.dtsi
index 7f2333c..8ccade6 100644
--- a/src/arm64/qcom/sm8250.dtsi
+++ b/src/arm64/qcom/sm8250.dtsi

@@ -2203,6 +2203,16 @@
 			dma-coherent;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie0_phy: phy@1c06000 {
@@ -2318,6 +2328,16 @@
 			dma-coherent;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie1_phy: phy@1c0e000 {
@@ -2433,6 +2453,16 @@
 			dma-coherent;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie2_phy: phy@1c16000 {

diff --git a/src/arm64/qcom/sm8350-hdk.dts b/src/arm64/qcom/sm8350-hdk.dts
index b43d264..4c25ab2 100644
--- a/src/arm64/qcom/sm8350-hdk.dts
+++ b/src/arm64/qcom/sm8350-hdk.dts

@@ -42,6 +42,7 @@
 		compatible = "qcom,sm8350-pmic-glink", "qcom,pmic-glink";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		orientation-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
 
 		connector@0 {
 			compatible = "usb-c-connector";

diff --git a/src/arm64/qcom/sm8350.dtsi b/src/arm64/qcom/sm8350.dtsi
index a5e7dbb..f7c4700 100644
--- a/src/arm64/qcom/sm8350.dtsi
+++ b/src/arm64/qcom/sm8350.dtsi

@@ -12,6 +12,7 @@
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,sm8350.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/phy/phy-qcom-qmp.h>
@@ -1572,6 +1573,16 @@
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie0_phy: phy@1c06000 {
@@ -1669,6 +1680,16 @@
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie1_phy: phy@1c0e000 {
@@ -1730,6 +1751,11 @@
 				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
 			freq-table-hz =
 				<75000000 300000000>,
 				<0 0>,

diff --git a/src/arm64/qcom/sm8450-hdk.dts b/src/arm64/qcom/sm8450-hdk.dts
index 0786cff..3be46b5 100644
--- a/src/arm64/qcom/sm8450-hdk.dts
+++ b/src/arm64/qcom/sm8450-hdk.dts

@@ -95,6 +95,7 @@
 		compatible = "qcom,sm8450-pmic-glink", "qcom,pmic-glink";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		orientation-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
 
 		connector@0 {
 			compatible = "usb-c-connector";

diff --git a/src/arm64/qcom/sm8450-qrd.dts b/src/arm64/qcom/sm8450-qrd.dts
index c7d0594..7b62ead 100644
--- a/src/arm64/qcom/sm8450-qrd.dts
+++ b/src/arm64/qcom/sm8450-qrd.dts

@@ -467,6 +467,14 @@
 	vdda-pll-supply = <&vreg_l5b_0p88>;
 	vdda18-supply = <&vreg_l1c_1p8>;
 	vdda33-supply = <&vreg_l2b_3p07>;
+	qcom,squelch-detector-bp = <(-2090)>;
+	qcom,hs-disconnect-bp = <1743>;
+	qcom,pre-emphasis-amplitude-bp = <40000>;
+	qcom,pre-emphasis-duration-bp = <20000>;
+	qcom,hs-amplitude-bp = <2000>;
+	qcom,hs-output-impedance-micro-ohms = <2600000>;
+	qcom,hs-crossover-voltage-microvolt = <(-31000)>;
+	qcom,hs-rise-fall-time-bp = <(-4100)>;
 };
 
 &usb_1_qmpphy {

diff --git a/src/arm64/qcom/sm8450.dtsi b/src/arm64/qcom/sm8450.dtsi
index 024d265..616461f 100644
--- a/src/arm64/qcom/sm8450.dtsi
+++ b/src/arm64/qcom/sm8450.dtsi

@@ -1846,6 +1846,16 @@
 			pinctrl-0 = <&pcie0_default_state>;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie0_phy: phy@1c06000 {
@@ -1963,6 +1973,16 @@
 			pinctrl-0 = <&pcie1_default_state>;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie1_phy: phy@1c0e000 {
@@ -2355,6 +2375,7 @@
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
 					label = "sdsp";
+					qcom,non-secure-domain;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
@@ -2657,6 +2678,7 @@
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
 					label = "adsp";
+					qcom,non-secure-domain;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
@@ -2723,6 +2745,7 @@
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
 					label = "cdsp";
+					qcom,non-secure-domain;
 					#address-cells = <1>;
 					#size-cells = <0>;
 

diff --git a/src/arm64/qcom/sm8550-sony-xperia-yodo-pdx234.dts b/src/arm64/qcom/sm8550-sony-xperia-yodo-pdx234.dts
new file mode 100644
index 0000000..85e0d3d
--- /dev/null
+++ b/src/arm64/qcom/sm8550-sony-xperia-yodo-pdx234.dts

@@ -0,0 +1,779 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/cs35l45.h>
+#include "sm8550.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+/* TODO: Only one SID of PMR735D seems accessible? */
+
+/delete-node/ &hwfence_shbuf;
+/delete-node/ &mpss_mem;
+/delete-node/ &rmtfs_mem;
+/ {
+	model = "Sony Xperia 1 V";
+	compatible = "sony,pdx234", "qcom,sm8550";
+	chassis-type = "handset";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c4 = &i2c4;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c16 = &i2c_hub_2;
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
+		pinctrl-names = "default";
+
+		key-camera-focus {
+			label = "Camera Focus";
+			linux,code = <KEY_CAMERA_FOCUS>;
+			gpios = <&pm8550b_gpios 8 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-camera-snapshot {
+			label = "Camera Snapshot";
+			gpios = <&pm8550b_gpios 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
+		orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_out>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		mpss_mem: mpss-region@89800000 {
+			reg = <0x0 0x89800000 0x0 0x10800000>;
+			no-map;
+		};
+
+		splash@b8000000 {
+			reg = <0x0 0xb8000000 0x0 0x2b00000>;
+			no-map;
+		};
+
+		hwfence_shbuf: hwfence-shbuf-region@e6440000 {
+			reg = <0x0 0xe6440000 0x0 0x2dd000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@f8b00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xf8b00000 0x0 0x280000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+		};
+
+		ramoops@ffd00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffd00000 0x0 0xc0000>;
+			console-size = <0x40000>;
+			record-size = <0x1000>;
+			pmsg-size = <0x40000>;
+			ecc-size = <16>;
+		};
+
+		rdtag-store-region@ffdc0000 {
+			reg = <0x0 0xffdc0000 0x0 0x40000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		pm8550_bob1: bob1 {
+			regulator-name = "pm8550_bob1";
+			regulator-min-microvolt = <3416000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* TODO: bob2 @ 2.704-3.008V doesn't fall into the vreg driver constraints */
+
+		pm8550_l1: ldo1 {
+			regulator-name = "pm8550_l1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l2: ldo2 {
+			regulator-name = "pm8550_l2";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L4 exists in cmd-db, but the board seems to crash on access */
+
+		pm8550_l5: ldo5 {
+			regulator-name = "pm8550_l5";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l6: ldo6 {
+			regulator-name = "pm8550_l6";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l7: ldo7 {
+			regulator-name = "pm8550_l7";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l8: ldo8 {
+			regulator-name = "pm8550_l8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l9: ldo9 {
+			regulator-name = "pm8550_l9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l10: ldo10 {
+			regulator-name = "pm8550_l10";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l11: ldo11 {
+			regulator-name = "pm8550_l11";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l12: ldo12 {
+			regulator-name = "pm8550_l12";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l13: ldo13 {
+			regulator-name = "pm8550_l13";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l14: ldo14 {
+			regulator-name = "pm8550_l14";
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l15: ldo15 {
+			regulator-name = "pm8550_l15";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l16: ldo16 {
+			regulator-name = "pm8550_l16";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l17: ldo17 {
+			regulator-name = "pm8550_l17";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		pm8550vs_0_l1: ldo1 {
+			regulator-name = "pm8550vs_0_l1";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_0_l3: ldo3 {
+			regulator-name = "pm8550vs_0_l3";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		pm8550vs_1_l1: ldo1 {
+			regulator-name = "pm8550vs_1_l1";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L3 exists in cmd-db, but the board seems to crash on access */
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		pm8550vs_2_s4: smps4 {
+			regulator-name = "pm8550vs_2_s4";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_2_s5: smps5 {
+			regulator-name = "pm8550vs_2_s5";
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_2_l1: ldo1 {
+			regulator-name = "pm8550vs_2_l1";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_2_l2: ldo2 {
+			regulator-name = "pm8550vs_2_l2";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_2_l3: ldo3 {
+			regulator-name = "pm8550vs_2_l3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		pm8550ve_s4: smps4 {
+			regulator-name = "pm8550ve_s4";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550ve_l1: ldo1 {
+			regulator-name = "pm8550ve_l1";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550ve_l2: ldo2 {
+			regulator-name = "pm8550ve_l2";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550ve_l3: ldo3 {
+			regulator-name = "pm8550ve_l3";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "g";
+
+		pm8550vs_3_s1: smps1 {
+			regulator-name = "pm8550vs_3_s1";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_s2: smps2 {
+			regulator-name = "pm8550vs_3_s2";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_s3: smps3 {
+			regulator-name = "pm8550vs_3_s3";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_s4: smps4 {
+			regulator-name = "pm8550vs_3_s4";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_s5: smps5 {
+			regulator-name = "pm8550vs_3_s5";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_s6: smps6 {
+			regulator-name = "pm8550vs_3_s6";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_l1: ldo1 {
+			regulator-name = "pm8550vs_3_l1";
+			regulator-min-microvolt = <1144000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_l2: ldo2 {
+			regulator-name = "pm8550vs_3_l2";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_l3: ldo3 {
+			regulator-name = "pm8550vs_3_l3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* TODO: Unknown PMIC @ k, l, PM8010 @ m, n */
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&i2c_hub_2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	pmic@75 {
+		compatible = "dlg,slg51000";
+		reg = <0x75>;
+		dlg,cs-gpios = <&pm8550vs_g_gpios 4 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&cam_pwr_a_cs>;
+		pinctrl-names = "default";
+
+		regulators {
+			slg51000_a_ldo1: ldo1 {
+				regulator-name = "slg51000_a_ldo1";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_a_ldo2: ldo2 {
+				regulator-name = "slg51000_a_ldo2";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_a_ldo3: ldo3 {
+				regulator-name = "slg51000_a_ldo3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_a_ldo4: ldo4 {
+				regulator-name = "slg51000_a_ldo4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_a_ldo5: ldo5 {
+				regulator-name = "slg51000_a_ldo5";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_a_ldo6: ldo6 {
+				regulator-name = "slg51000_a_ldo6";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_a_ldo7: ldo7 {
+				regulator-name = "slg51000_a_ldo7";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+		};
+	};
+};
+
+&i2c_master_hub_0 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	/* NXP NFC @ 28 */
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* LX Semi SW82907 touchscreen @ 28 */
+};
+
+&i2c10 {
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	/* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
+};
+
+&i2c11 {
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	cs35l41_l: speaker-amp@30 {
+		compatible = "cirrus,cs35l45";
+		reg = <0x30>;
+		interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
+		cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | CS35L45_ASP_TX_HIZ_DISABLED)>;
+		#sound-dai-cells = <1>;
+
+		cirrus,gpio-ctrl2 {
+			gpio-ctrl = <0x2>;
+		};
+	};
+
+	cs35l41_r: speaker-amp@31 {
+		compatible = "cirrus,cs35l45";
+		reg = <0x31>;
+		interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
+		cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | CS35L45_ASP_TX_HIZ_DISABLED)>;
+		#sound-dai-cells = <1>;
+
+		cirrus,gpio-ctrl2 {
+			gpio-ctrl = <0x2>;
+		};
+	};
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&pm8550vs_2_l1>;
+	vdda-pll-supply = <&pm8550vs_2_l3>;
+
+	status = "okay";
+};
+
+&pm8550_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>, <4>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <0>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <2>, <3>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <1>;
+	};
+};
+
+&pm8550_gpios {
+	vol_down_n: volume-down-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio12";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-down;
+		output-disable;
+		input-enable;
+	};
+};
+
+&pm8550b_gpios {
+	snapshot_n: snapshot-n-state {
+		pins = "gpio7";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	focus_n: focus-n-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm8550vs_g_gpios {
+	cam_pwr_a_cs: cam-pwr-a-cs-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <0x01>;
+		drive-push-pull;
+		output-low;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	qcom,tune-usb2-disc-thres = /bits/ 8 <0x6>;
+	qcom,tune-usb2-amplitude = /bits/ 8 <0xf>;
+	qcom,tune-usb2-preem = /bits/ 8 <0x7>;
+	vdd18-supply = <&pm8550_l15>;
+	vdd3-supply = <&pm8550_l5>;
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEUP>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8550/Sony/yodo/adsp.mbn",
+			"qcom/sm8550/Sony/yodo/adsp_dtb.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8550/Sony/yodo/cdsp.mbn",
+			"qcom/sm8550/Sony/yodo/cdsp_dtb.mbn";
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>;
+	pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+	vmmc-supply = <&pm8550_l9>;
+	vqmmc-supply = <&pm8550_l8>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 8>;
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&pm8550vs_2_l1>;
+	vdda12-supply = <&pm8550vs_2_l3>;
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&pm8550vs_2_l3>;
+	vdda-pll-supply = <&pm8550ve_l3>;
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_dp_qmpphy_usb_ss_in {
+	remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};

diff --git a/src/arm64/qcom/sm8550.dtsi b/src/arm64/qcom/sm8550.dtsi
index 3348bc0..bc5aeb0 100644
--- a/src/arm64/qcom/sm8550.dtsi
+++ b/src/arm64/qcom/sm8550.dtsi

@@ -812,6 +812,7 @@
 			dma-channels = <12>;
 			dma-channel-mask = <0x3e>;
 			iommus = <&apps_smmu 0x436 0>;
+			dma-coherent;
 			status = "disabled";
 		};
 
@@ -823,6 +824,7 @@
 			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
 				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
 			iommus = <&apps_smmu 0x423 0>;
+			dma-coherent;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			status = "disabled";
@@ -1322,6 +1324,7 @@
 			dma-channels = <12>;
 			dma-channel-mask = <0x1e>;
 			iommus = <&apps_smmu 0xb6 0>;
+			dma-coherent;
 			status = "disabled";
 		};
 
@@ -1335,6 +1338,7 @@
 			iommus = <&apps_smmu 0xa3 0>;
 			interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>;
 			interconnect-names = "qup-core";
+			dma-coherent;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			status = "disabled";
@@ -1769,6 +1773,16 @@
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie0_phy: phy@1c06000 {
@@ -1881,6 +1895,16 @@
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie1_phy: phy@1c0e000 {
@@ -3225,12 +3249,21 @@
 				reg = <0x0 0x0a600000 0x0 0xcd00>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x40 0x0>;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				snps,usb3_lpm_capable;
 				phys = <&usb_1_hsphy>,
 				       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,usb2-gadget-lpm-disable;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,is-utmi-l1-suspend;
+				snps,usb3_lpm_capable;
+				snps,usb2-lpm-disable;
+				snps,has-lpm-erratum;
+				tx-fifo-resize;
+				dma-coherent;
 
 				ports {
 					#address-cells = <1>;
@@ -3966,6 +3999,7 @@
 				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 		};
 
 		intc: interrupt-controller@17100000 {
@@ -4314,6 +4348,7 @@
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
 					label = "adsp";
+					qcom,non-secure-domain;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
@@ -4452,6 +4487,7 @@
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
 					label = "cdsp";
+					qcom,non-secure-domain;
 					#address-cells = <1>;
 					#size-cells = <0>;
 

diff --git a/src/arm64/qcom/sm8650-mtp.dts b/src/arm64/qcom/sm8650-mtp.dts
index 4450273..d04ceaa 100644
--- a/src/arm64/qcom/sm8650-mtp.dts
+++ b/src/arm64/qcom/sm8650-mtp.dts

@@ -641,10 +641,6 @@
 	status = "okay";
 };
 
-&mdss_mdp {
-	status = "okay";
-};
-
 &pcie_1_phy_aux_clk {
 	clock-frequency = <1000>;
 };

diff --git a/src/arm64/qcom/sm8650-qrd.dts b/src/arm64/qcom/sm8650-qrd.dts
index b07cac2..4e94f7f 100644
--- a/src/arm64/qcom/sm8650-qrd.dts
+++ b/src/arm64/qcom/sm8650-qrd.dts

@@ -766,6 +766,14 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8650/gen70900_zap.mbn";
+	};
+};
+
 &lpass_tlmm {
 	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
 		pins = "gpio21";
@@ -827,10 +835,6 @@
 	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
 };
 
-&mdss_mdp {
-	status = "okay";
-};
-
 &pcie_1_phy_aux_clk {
 	clock-frequency = <1000>;
 };

diff --git a/src/arm64/qcom/sm8650.dtsi b/src/arm64/qcom/sm8650.dtsi
index eb11786..62a6e77 100644
--- a/src/arm64/qcom/sm8650.dtsi
+++ b/src/arm64/qcom/sm8650.dtsi

@@ -485,9 +485,9 @@
 			no-map;
 		};
 
-		/* Merged aop_config, tme_crash_dump, tme_log and uefi_log regions */
+		/* Merged aop_config, tme_crash_dump, tme_log, uefi_log, and chipinfo regions */
 		aop_tme_uefi_merged_mem: aop-tme-uefi-merged@81c80000 {
-			reg = <0 0x81c80000 0 0x74000>;
+			reg = <0 0x81c80000 0 0x75000>;
 			no-map;
 		};
 
@@ -2293,6 +2293,16 @@
 			dma-coherent;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie0_phy: phy@1c06000 {
@@ -2420,6 +2430,16 @@
 				 <0x02000000 0 0x40300000 0 0x40300000 0 0x1fd00000>;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie1_phy: phy@1c0e000 {
@@ -2589,6 +2609,143 @@
 			#reset-cells = <1>;
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-43051401", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x2000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x0>,
+				 <&adreno_smmu 1 0x0>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&gpu_micro_code_mem>;
+			};
+
+			/* Speedbin needs more work on A740+, keep only lower freqs */
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-231000000 {
+					opp-hz = /bits/ 64 <231000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+				};
+
+				opp-310000000 {
+					opp-hz = /bits/ 64 <310000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+				};
+
+				opp-366000000 {
+					opp-hz = /bits/ 64 <366000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+				};
+
+				opp-422000000 {
+					opp-hz = /bits/ 64 <422000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+				};
+
+				opp-578000000 {
+					opp-hz = /bits/ 64 <578000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-629000000 {
+					opp-hz = /bits/ 64 <629000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+				};
+
+				opp-680000000 {
+					opp-hz = /bits/ 64 <680000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-720000000 {
+					opp-hz = /bits/ 64 <720000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+				};
+
+				opp-770000000 {
+					opp-hz = /bits/ 64 <770000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+				};
+
+				opp-834000000 {
+					opp-hz = /bits/ 64 <834000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-750.1", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x35000>,
+			      <0x0 0x03d50000 0x0 0x10000>,
+			      <0x0 0x0b280000 0x0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_DEMET_CLK>;
+			clock-names = "ahb",
+				      "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "hub",
+				      "demet";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5 0x0>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-260000000 {
+					opp-hz = /bits/ 64 <260000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-625000000 {
+					opp-hz = /bits/ 64 <625000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+			};
+		};
+
 		gpucc: clock-controller@3d90000 {
 			compatible = "qcom,sm8650-gpucc";
 			reg = <0 0x03d90000 0 0xa000>;
@@ -2602,6 +2759,50 @@
 			#power-domain-cells = <1>;
 		};
 
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8650-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>;
+			clock-names = "hlos",
+				      "bus",
+				      "iface",
+				      "ahb";
+			power-domains = <&gpucc GPU_CX_GDSC>;
+			dma-coherent;
+		};
+
 		ipa: ipa@3f40000 {
 			compatible = "qcom,sm8650-ipa", "qcom,sm8550-ipa";
 
@@ -3582,14 +3783,16 @@
 			compatible = "qcom,sm8650-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
 
-			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_RISING>,
 					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 14 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "ss_phy_irq";
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -4843,6 +5046,8 @@
 
 					label = "adsp";
 
+					qcom,non-secure-domain;
+
 					#address-cells = <1>;
 					#size-cells = <0>;
 
@@ -5000,6 +5205,8 @@
 
 					label = "cdsp";
 
+					qcom,non-secure-domain;
+
 					#address-cells = <1>;
 					#size-cells = <0>;
 
@@ -5082,6 +5289,38 @@
 							 <&apps_smmu 0x19c8 0x0>;
 						dma-coherent;
 					};
+
+					/* note: secure cb9 in downstream */
+
+					compute-cb@10 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <12>;
+
+						iommus = <&apps_smmu 0x196c 0x0>,
+							 <&apps_smmu 0x0c0c 0x20>,
+							 <&apps_smmu 0x19cc 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@11 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <13>;
+
+						iommus = <&apps_smmu 0x196d 0x0>,
+							 <&apps_smmu 0x0c0d 0x20>,
+							 <&apps_smmu 0x19cd 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@12 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <14>;
+
+						iommus = <&apps_smmu 0x196e 0x0>,
+							 <&apps_smmu 0x0c0e 0x20>,
+							 <&apps_smmu 0x19ce 0x0>;
+						dma-coherent;
+					};
 				};
 			};
 		};

diff --git a/src/arm64/qcom/x1e80100-crd.dts b/src/arm64/qcom/x1e80100-crd.dts
index 6a0a545..be6b1e7 100644
--- a/src/arm64/qcom/x1e80100-crd.dts
+++ b/src/arm64/qcom/x1e80100-crd.dts

@@ -9,6 +9,7 @@
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. X1E80100 CRD";
@@ -48,6 +49,15 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
 	sound {
 		compatible = "qcom,x1e80100-sndcard";
 		model = "X1E80100-CRD";
@@ -92,7 +102,7 @@
 			};
 
 			codec {
-				sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
 			};
 
 			platform {
@@ -598,8 +608,6 @@
 	compatible = "qcom,x1e80100-dp";
 	/delete-property/ #sound-dai-cells;
 
-	data-lanes = <0 1 2 3>;
-
 	status = "okay";
 
 	aux-bus {
@@ -619,6 +627,9 @@
 		port@1 {
 			reg = <1>;
 			mdss_dp3_out: endpoint {
+				data-lanes = <0 1 2 3>;
+				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
 				remote-endpoint = <&edp_panel_in>;
 			};
 		};
@@ -680,16 +691,32 @@
 	status = "okay";
 };
 
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_2_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l8b_3p0>;
+};
+
 &swr0 {
 	status = "okay";
 
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
 	/* WSA8845, Left Woofer */
 	left_woofer: speaker@0,0 {
 		compatible = "sdw20217020400";
 		reg = <0 0>;
-		pinctrl-0 = <&spkr_01_sd_n_active>;
-		pinctrl-names = "default";
-		powerdown-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "WooferLeft";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
@@ -700,8 +727,7 @@
 	left_tweeter: speaker@0,1 {
 		compatible = "sdw20217020400";
 		reg = <0 1>;
-		/* pinctrl in left_woofer node because of sharing the GPIO*/
-		powerdown-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TwitterLeft";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
@@ -727,20 +753,21 @@
 	wcd_tx: codec@0,3 {
 		compatible = "sdw20217010d00";
 		reg = <0 3>;
-		qcom,tx-port-mapping = <1 1 2 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
 	};
 };
 
 &swr3 {
 	status = "okay";
 
+	pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
+	pinctrl-names = "default";
+
 	/* WSA8845, Right Woofer */
 	right_woofer: speaker@0,0 {
 		compatible = "sdw20217020400";
 		reg = <0 0>;
-		pinctrl-0 = <&spkr_23_sd_n_active>;
-		pinctrl-names = "default";
-		powerdown-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "WooferRight";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
@@ -751,8 +778,7 @@
 	right_tweeter: speaker@0,1 {
 		compatible = "sdw20217020400";
 		reg = <0 1>;
-		/* pinctrl in right_woofer node because of sharing the GPIO*/
-		powerdown-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TwitterRight";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
@@ -817,6 +843,8 @@
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
+	phys = <&smb2360_0_eusb2_repeater>;
+
 	status = "okay";
 };
 
@@ -837,6 +865,8 @@
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
+	phys = <&smb2360_1_eusb2_repeater>;
+
 	status = "okay";
 };
 
@@ -857,6 +887,8 @@
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
+	phys = <&smb2360_2_eusb2_repeater>;
+
 	status = "okay";
 };
 

diff --git a/src/arm64/qcom/x1e80100-pmics.dtsi b/src/arm64/qcom/x1e80100-pmics.dtsi
new file mode 100644
index 0000000..04301f7
--- /dev/null
+++ b/src/arm64/qcom/x1e80100-pmics.dtsi

@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+};
+
+&spmi_bus1 {
+	smb2360_0: pmic@7 {
+		compatible = "qcom,smb2360", "qcom,spmi-pmic";
+		reg = <0x7 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		smb2360_0_eusb2_repeater: phy@fd00 {
+			compatible = "qcom,smb2360-eusb2-repeater";
+			reg = <0xfd00>;
+			#phy-cells = <0>;
+		};
+	};
+
+	smb2360_1: pmic@a {
+		compatible = "qcom,smb2360", "qcom,spmi-pmic";
+		reg = <0xa SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		smb2360_1_eusb2_repeater: phy@fd00 {
+			compatible = "qcom,smb2360-eusb2-repeater";
+			reg = <0xfd00>;
+			#phy-cells = <0>;
+		};
+	};
+
+	smb2360_2: pmic@b {
+		compatible = "qcom,smb2360", "qcom,spmi-pmic";
+		reg = <0xb SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		smb2360_2_eusb2_repeater: phy@fd00 {
+			compatible = "qcom,smb2360-eusb2-repeater";
+			reg = <0xfd00>;
+			#phy-cells = <0>;
+		};
+	};
+};

diff --git a/src/arm64/qcom/x1e80100-qcp.dts b/src/arm64/qcom/x1e80100-qcp.dts
index e76d290..8f67c39 100644
--- a/src/arm64/qcom/x1e80100-qcp.dts
+++ b/src/arm64/qcom/x1e80100-qcp.dts

@@ -9,6 +9,7 @@
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. X1E80100 QCP";
@@ -22,6 +23,15 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 
@@ -409,8 +419,6 @@
 	compatible = "qcom,x1e80100-dp";
 	/delete-property/ #sound-dai-cells;
 
-	data-lanes = <0 1 2 3>;
-
 	status = "okay";
 
 	aux-bus {
@@ -430,6 +438,9 @@
 		port@1 {
 			reg = <1>;
 			mdss_dp3_out: endpoint {
+				data-lanes = <0 1 2 3>;
+				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
 				remote-endpoint = <&edp_panel_in>;
 			};
 		};
@@ -491,6 +502,21 @@
 	status = "okay";
 };
 
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_2_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l8b_3p0>;
+};
+
 &tlmm {
 	gpio-reserved-ranges = <33 3>, /* Unused */
 			       <44 4>, /* SPI (TPM) */
@@ -513,6 +539,8 @@
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
+	phys = <&smb2360_0_eusb2_repeater>;
+
 	status = "okay";
 };
 
@@ -533,6 +561,8 @@
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
+	phys = <&smb2360_1_eusb2_repeater>;
+
 	status = "okay";
 };
 
@@ -553,6 +583,8 @@
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
+	phys = <&smb2360_2_eusb2_repeater>;
+
 	status = "okay";
 };
 

diff --git a/src/arm64/qcom/x1e80100.dtsi b/src/arm64/qcom/x1e80100.dtsi
index 6b40082..05e4d49 100644
--- a/src/arm64/qcom/x1e80100.dtsi
+++ b/src/arm64/qcom/x1e80100.dtsi

@@ -2737,15 +2737,17 @@
 			device_type = "pci";
 			compatible = "qcom,pcie-x1e80100";
 			reg = <0 0x01bf8000 0 0x3000>,
-			      <0 0x70000000 0 0xf1d>,
-			      <0 0x70000f20 0 0xa8>,
+			      <0 0x70000000 0 0xf20>,
+			      <0 0x70000f40 0 0xa8>,
 			      <0 0x70001000 0 0x1000>,
-			      <0 0x70100000 0 0x100000>;
+			      <0 0x70100000 0 0x100000>,
+			      <0 0x01bfb000 0 0x1000>;
 			reg-names = "parf",
 				    "dbi",
 				    "elbi",
 				    "atu",
-				    "config";
+				    "config",
+				    "mhi";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			ranges = <0x01000000 0 0x00000000 0 0x70200000 0 0x100000>,
@@ -3088,7 +3090,7 @@
 			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
 			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0x0f 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
 			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
-			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
 			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
 			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
 
@@ -4095,8 +4097,6 @@
 
 						mdss_dp3_in: endpoint {
 							remote-endpoint = <&mdss_intf5_out>;
-
-							link-frequencies = /bits/ 64 <8100000000>;
 						};
 					};
 
@@ -4221,6 +4221,48 @@
 			#clock-cells = <0>;
 		};
 
+		spmi: arbiter@c400000 {
+			compatible = "qcom,x1e80100-spmi-pmic-arb";
+			reg = <0 0x0c400000 0 0x3000>,
+			      <0 0x0c500000 0 0x400000>,
+			      <0 0x0c440000 0 0x80000>;
+			reg-names = "core", "chnls", "obsrvr";
+
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			spmi_bus0: spmi@c42d000 {
+				reg = <0 0x0c42d000 0 0x4000>,
+				      <0 0x0c4c0000 0 0x10000>;
+				reg-names = "cnfg", "intr";
+
+				interrupt-names = "periph_irq";
+				interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <4>;
+
+				#address-cells = <2>;
+				#size-cells = <0>;
+			};
+
+			spmi_bus1: spmi@c432000 {
+				reg = <0 0x0c432000 0 0x4000>,
+				      <0 0x0c4d0000 0 0x10000>;
+				reg-names = "cnfg", "intr";
+
+				interrupt-names = "periph_irq";
+				interrupts-extended = <&pdc 3 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <4>;
+
+				#address-cells = <2>;
+				#size-cells = <0>;
+			};
+		};
 
 		tlmm: pinctrl@f100000 {
 			compatible = "qcom,x1e80100-tlmm";

diff --git a/src/arm64/realtek/rtd129x.dtsi b/src/arm64/realtek/rtd129x.dtsi
index 39aefe6..ba50e29 100644
--- a/src/arm64/realtek/rtd129x.dtsi
+++ b/src/arm64/realtek/rtd129x.dtsi

@@ -48,7 +48,7 @@
 		clock-output-names = "osc27M";
 	};
 
-	soc {
+	soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;

diff --git a/src/arm64/realtek/rtd139x.dtsi b/src/arm64/realtek/rtd139x.dtsi
index a3c10ce..e8af391 100644
--- a/src/arm64/realtek/rtd139x.dtsi
+++ b/src/arm64/realtek/rtd139x.dtsi

@@ -47,7 +47,7 @@
 		clock-output-names = "osc27M";
 	};
 
-	soc {
+	soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;

diff --git a/src/arm64/realtek/rtd16xx.dtsi b/src/arm64/realtek/rtd16xx.dtsi
index 34802cc..3a7f6e3 100644
--- a/src/arm64/realtek/rtd16xx.dtsi
+++ b/src/arm64/realtek/rtd16xx.dtsi

@@ -109,7 +109,7 @@
 	};
 
 	arm_pmu: pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a55-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>,
 			<&cpu3>, <&cpu4>, <&cpu5>;
@@ -127,7 +127,7 @@
 		#clock-cells = <0>;
 	};
 
-	soc {
+	soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;

diff --git a/src/arm64/renesas/r8a77970-eagle-function-expansion.dtso b/src/arm64/renesas/r8a77970-eagle-function-expansion.dtso
new file mode 100644
index 0000000..3aa243c
--- /dev/null
+++ b/src/arm64/renesas/r8a77970-eagle-function-expansion.dtso

@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Eagle V3M Function expansion board.
+ *
+ * Copyright (C) 2024 Niklas Söderlund <niklas.soderlund@ragnatech.se>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* CN4 */
+	/* Eagle: SW18 set to OFF */
+	cvbs-in-cn4 {
+		compatible = "composite-video-connector";
+		label = "CVBS IN CN4";
+
+		port {
+			cvbs_con: endpoint {
+				remote-endpoint = <&adv7482_ain7>;
+			};
+		};
+	};
+
+	/* CN2 */
+	/* Eagle: SW35 set 5, 6 and 8 to OFF */
+	hdmi-in-cn2 {
+		compatible = "hdmi-connector";
+		label = "HDMI IN CN2";
+		type = "a";
+
+		port {
+			hdmi_in_con2: endpoint {
+				remote-endpoint = <&adv7612_in>;
+			};
+		};
+	};
+
+	/* CN3 */
+	/* Eagle: SW18 set to OFF */
+	hdmi-in-cn3 {
+		compatible = "hdmi-connector";
+		label = "HDMI IN CN3";
+		type = "a";
+
+		port {
+			hdmi_in_con: endpoint {
+				remote-endpoint = <&adv7482_hdmi>;
+			};
+		};
+	};
+};
+
+/* Disconnect MAX9286 GMSL I2C. */
+&i2c3 {
+	status = "disabled";
+};
+
+/* Connect expansion board I2C. */
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	gpio@27 {
+		compatible = "onnn,pca9654";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		vin0_adv7612_en {
+			gpio-hog;
+			gpios = <3 GPIO_ACTIVE_LOW>;
+			output-high;
+			line-name = "VIN0_ADV7612_ENn";
+		};
+	};
+
+	hdmi-decoder@4c {
+		compatible = "adi,adv7612";
+		reg = <0x4c>, <0x50>, <0x52>, <0x54>, <0x56>, <0x58>;
+		reg-names = "main", "afe", "rep", "edid", "hdmi", "cp";
+		interrupt-parent = <&gpio3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		default-input = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7612_in: endpoint {
+					remote-endpoint = <&hdmi_in_con2>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				adv7612_out: endpoint {
+					remote-endpoint = <&vin0_in>;
+				};
+			};
+		};
+	};
+
+	video-receiver@70 {
+		compatible = "adi,adv7482";
+		reg = <0x70 0x71 0x72 0x73 0x74 0x75
+		       0x60 0x61 0x62 0x63 0x64 0x65>;
+		reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
+			    "infoframe", "cbus", "cec", "sdp", "txa", "txb" ;
+		interrupt-parent = <&gpio3>;
+		interrupts = <03 IRQ_TYPE_LEVEL_LOW>, <04 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "intrq1", "intrq2";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@7 {
+				reg = <7>;
+
+				adv7482_ain7: endpoint {
+					remote-endpoint = <&cvbs_con>;
+				};
+			};
+
+			port@8 {
+				reg = <8>;
+
+				adv7482_hdmi: endpoint {
+					remote-endpoint = <&hdmi_in_con>;
+				};
+			};
+
+			port@a {
+				reg = <10>;
+
+				adv7482_txa: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csi40_in>;
+				};
+			};
+		};
+	};
+
+};
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&adv7482_txa>;
+			};
+		};
+	};
+};
+
+&pfc {
+	vin0_pins_parallel: vin0 {
+		groups = "vin0_data12", "vin0_sync", "vin0_clk", "vin0_clkenb";
+		function = "vin0";
+	};
+};
+
+&vin0 {
+	status = "okay";
+
+	pinctrl-0 = <&vin0_pins_parallel>;
+	pinctrl-names = "default";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			vin0_in: endpoint {
+				pclk-sample = <0>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				remote-endpoint = <&adv7612_out>;
+			};
+		};
+	};
+};
+
+&vin1 {
+	status = "okay";
+};
+
+&vin2 {
+	status = "okay";
+};
+
+&vin3 {
+	status = "okay";
+};

diff --git a/src/arm64/renesas/r8a779f4-s4sk.dts b/src/arm64/renesas/r8a779f4-s4sk.dts
index abfda5c..bc65a7b 100644
--- a/src/arm64/renesas/r8a779f4-s4sk.dts
+++ b/src/arm64/renesas/r8a779f4-s4sk.dts

@@ -14,9 +14,9 @@
 	compatible = "renesas,s4sk", "renesas,r8a779f4", "renesas,r8a779f0";
 
 	aliases {
-		serial0	= &hscif0;
-		serial1	= &hscif1;
-		eth0	= &rswitch;
+		serial0 = &hscif0;
+		serial1 = &hscif1;
+		ethernet0 = &rswitch;
 	};
 
 	chosen {

diff --git a/src/arm64/renesas/r8a779h0-gray-hawk-single.dts b/src/arm64/renesas/r8a779h0-gray-hawk-single.dts
index bc8616a..cfbe8c8 100644
--- a/src/arm64/renesas/r8a779h0-gray-hawk-single.dts
+++ b/src/arm64/renesas/r8a779h0-gray-hawk-single.dts

@@ -18,11 +18,12 @@
 
 	aliases {
 		serial0 = &hscif0;
+		serial1 = &hscif2;
 		ethernet0 = &avb0;
 	};
 
 	chosen {
-		bootargs = "ignore_loglevel";
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
 		stdout-path = "serial0:921600n8";
 	};
 
@@ -90,6 +91,14 @@
 	status = "okay";
 };
 
+&hscif2 {
+	pinctrl-0 = <&hscif2_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-0 = <&i2c0_pins>;
 	pinctrl-names = "default";
@@ -144,7 +153,7 @@
 };
 
 &pfc {
-	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-0 = <&scif_clk_pins>, <&scif_clk2_pins>;
 	pinctrl-names = "default";
 
 	avb0_pins: avb0 {
@@ -170,6 +179,11 @@
 		function = "hscif0";
 	};
 
+	hscif2_pins: hscif2 {
+		groups = "hscif2_data", "hscif2_ctrl";
+		function = "hscif2";
+	};
+
 	i2c0_pins: i2c0 {
 		groups = "i2c0";
 		function = "i2c0";
@@ -190,6 +204,11 @@
 		groups = "scif_clk";
 		function = "scif_clk";
 	};
+
+	scif_clk2_pins: scif-clk2 {
+		groups = "scif_clk2";
+		function = "scif_clk2";
+	};
 };
 
 &rpc {
@@ -228,3 +247,7 @@
 &scif_clk {
 	clock-frequency = <24000000>;
 };
+
+&scif_clk2 {
+	clock-frequency = <24000000>;
+};

diff --git a/src/arm64/renesas/r8a779h0.dtsi b/src/arm64/renesas/r8a779h0.dtsi
index 1188572..6d79102 100644
--- a/src/arm64/renesas/r8a779h0.dtsi
+++ b/src/arm64/renesas/r8a779h0.dtsi

@@ -144,13 +144,19 @@
 		method = "smc";
 	};
 
-	/* External SCIF clock - to be overridden by boards that provide it */
+	/* External SCIF clocks - to be overridden by boards that provide them */
 	scif_clk: scif-clk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <0>;
 	};
 
+	scif_clk2: scif-clk2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
@@ -297,6 +303,76 @@
 			resets = <&cpg 917>;
 		};
 
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a779h0-cmt0",
+				     "renesas,rcar-gen4-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 910>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a779h0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 911>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a779h0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 912>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a779h0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 913>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 913>;
+			status = "disabled";
+		};
+
 		cpg: clock-controller@e6150000 {
 			compatible = "renesas,r8a779h0-cpg-mssr";
 			reg = <0 0xe6150000 0 0x4000>;
@@ -318,6 +394,106 @@
 			#power-domain-cells = <1>;
 		};
 
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a779h0-thermal";
+			reg = <0 0xe6198000 0 0x200>,
+			      <0 0xe61a0000 0 0x200>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a779h0", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 611>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a779h0", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 713>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a779h0", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 714>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a779h0", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 715>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a779h0", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 716>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a779h0", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 717>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
 		i2c0: i2c@e6500000 {
 			compatible = "renesas,i2c-r8a779h0",
 				     "renesas,rcar-gen4-i2c";
@@ -403,6 +579,57 @@
 			status = "disabled";
 		};
 
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a779h0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 515>,
+				 <&cpg CPG_CORE R8A779H0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 515>;
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a779h0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A779H0_CLK_SASYNCPERD1>,
+				 <&scif_clk2>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a779h0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A779H0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			dmas = <&dmac1 0x37>, <&dmac1 0x36>,
+			       <&dmac2 0x37>, <&dmac2 0x36>;
+			dma-names = "tx", "rx", "tx", "rx";
+			status = "disabled";
+		};
+
 		avb0: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a779h0",
 				     "renesas,etheravb-rcar-gen4";
@@ -446,6 +673,7 @@
 			phy-mode = "rgmii";
 			rx-internal-delay-ps = <0>;
 			tx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_hc 0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -547,6 +775,170 @@
 			status = "disabled";
 		};
 
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a779h0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>,
+				 <&cpg CPG_CORE R8A779H0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a779h0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>,
+				 <&cpg CPG_CORE R8A779H0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a779h0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>,
+				 <&cpg CPG_CORE R8A779H0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			dmas = <&dmac1 0x57>, <&dmac1 0x56>,
+			       <&dmac2 0x57>, <&dmac2 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a779h0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 705>,
+				 <&cpg CPG_CORE R8A779H0_CLK_SASYNCPERD1>,
+				 <&scif_clk2>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 705>;
+			dmas = <&dmac1 0x59>, <&dmac1 0x58>,
+			       <&dmac2 0x59>, <&dmac2 0x58>;
+			dma-names = "tx", "rx", "tx", "rx";
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a779h0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 618>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 618>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a779h0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 619>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 619>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a779h0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 620>;
+			dmas = <&dmac1 0x45>, <&dmac1 0x44>,
+			       <&dmac2 0x45>, <&dmac2 0x44>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 620>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a779h0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			dmas = <&dmac1 0x47>, <&dmac1 0x46>,
+			       <&dmac2 0x47>, <&dmac2 0x46>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 621>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof4: spi@e6c20000 {
+			compatible = "renesas,msiof-r8a779h0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c20000 0 0x0064>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			dmas = <&dmac1 0x49>, <&dmac1 0x48>,
+			       <&dmac2 0x49>, <&dmac2 0x48>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof5: spi@e6c28000 {
+			compatible = "renesas,msiof-r8a779h0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c28000 0 0x0064>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			dmas = <&dmac1 0x4b>, <&dmac1 0x4a>,
+			       <&dmac2 0x4b>, <&dmac2 0x4a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		dmac1: dma-controller@e7350000 {
 			compatible = "renesas,dmac-r8a779h0",
 				     "renesas,rcar-gen4-dmac";
@@ -580,6 +972,14 @@
 			resets = <&cpg 709>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+				 <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+				 <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+				 <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+				 <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+				 <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+				 <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+				 <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
 		};
 
 		dmac2: dma-controller@e7351000 {
@@ -605,6 +1005,10 @@
 			resets = <&cpg 710>;
 			#dma-cells = <1>;
 			dma-channels = <8>;
+			iommus = <&ipmmu_ds0 16>, <&ipmmu_ds0 17>,
+				 <&ipmmu_ds0 18>, <&ipmmu_ds0 19>,
+				 <&ipmmu_ds0 20>, <&ipmmu_ds0 21>,
+				 <&ipmmu_ds0 22>, <&ipmmu_ds0 23>;
 		};
 
 		mmc0: mmc@ee140000 {
@@ -618,6 +1022,7 @@
 			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
 			resets = <&cpg 706>;
 			max-frequency = <200000000>;
+			iommus = <&ipmmu_ds0 32>;
 			status = "disabled";
 		};
 
@@ -637,6 +1042,106 @@
 			status = "disabled";
 		};
 
+		ipmmu_rt0: iommu@ee480000 {
+			compatible = "renesas,ipmmu-r8a779h0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xee480000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt1: iommu@ee4c0000 {
+			compatible = "renesas,ipmmu-r8a779h0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xee4c0000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds0: iommu@eed00000 {
+			compatible = "renesas,ipmmu-r8a779h0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeed00000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@eed40000 {
+			compatible = "renesas,ipmmu-r8a779h0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeed40000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: iommu@eed80000 {
+			compatible = "renesas,ipmmu-r8a779h0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeed80000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc: iommu@eedc0000 {
+			compatible = "renesas,ipmmu-r8a779h0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeedc0000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_3dg: iommu@eee00000 {
+			compatible = "renesas,ipmmu-r8a779h0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeee00000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@eee80000 {
+			compatible = "renesas,ipmmu-r8a779h0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeee80000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi1: iommu@eeec0000 {
+			compatible = "renesas,ipmmu-r8a779h0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeeec0000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip0: iommu@eef00000 {
+			compatible = "renesas,ipmmu-r8a779h0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeef00000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@eefc0000 {
+			compatible = "renesas,ipmmu-r8a779h0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeefc0000 0 0x20000>;
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
 		gic: interrupt-controller@f1000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
@@ -653,6 +1158,36 @@
 		};
 	};
 
+	thermal-zones {
+		sensor_thermal_cr52: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal_ca76: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,

diff --git a/src/arm64/renesas/r9a07g043.dtsi b/src/arm64/renesas/r9a07g043.dtsi
index 8721f4c..6212ee5 100644
--- a/src/arm64/renesas/r9a07g043.dtsi
+++ b/src/arm64/renesas/r9a07g043.dtsi

@@ -598,6 +598,7 @@
 			gpio-ranges = <&pinctrl 0 0 152>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
+			interrupt-parent = <&irqc>;
 			clocks = <&cpg CPG_MOD R9A07G043_GPIO_HCLK>;
 			power-domains = <&cpg>;
 			resets = <&cpg R9A07G043_GPIO_RSTN>,
@@ -812,7 +813,7 @@
 
 		hsusb: usb@11c60000 {
 			compatible = "renesas,usbhs-r9a07g043",
-				     "renesas,rza2-usbhs";
+				     "renesas,rzg2l-usbhs";
 			reg = <0 0x11c60000 0 0x10000>;
 			interrupts = <SOC_PERIPHERAL_IRQ(100) IRQ_TYPE_EDGE_RISING>,
 				     <SOC_PERIPHERAL_IRQ(101) IRQ_TYPE_LEVEL_HIGH>,

diff --git a/src/arm64/renesas/r9a07g043u.dtsi b/src/arm64/renesas/r9a07g043u.dtsi
index 964b0a4..165bfcf 100644
--- a/src/arm64/renesas/r9a07g043u.dtsi
+++ b/src/arm64/renesas/r9a07g043u.dtsi

@@ -54,10 +54,6 @@
 	};
 };
 
-&pinctrl {
-	interrupt-parent = <&irqc>;
-};
-
 &soc {
 	interrupt-parent = <&gic>;
 

diff --git a/src/arm64/renesas/r9a07g044.dtsi b/src/arm64/renesas/r9a07g044.dtsi
index 9f00b75..88634ae 100644
--- a/src/arm64/renesas/r9a07g044.dtsi
+++ b/src/arm64/renesas/r9a07g044.dtsi

@@ -1217,7 +1217,7 @@
 
 		hsusb: usb@11c60000 {
 			compatible = "renesas,usbhs-r9a07g044",
-				     "renesas,rza2-usbhs";
+				     "renesas,rzg2l-usbhs";
 			reg = <0 0x11c60000 0 0x10000>;
 			interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,

diff --git a/src/arm64/renesas/r9a07g054.dtsi b/src/arm64/renesas/r9a07g054.dtsi
index 53d8905..e89bfe4 100644
--- a/src/arm64/renesas/r9a07g054.dtsi
+++ b/src/arm64/renesas/r9a07g054.dtsi

@@ -1225,7 +1225,7 @@
 
 		hsusb: usb@11c60000 {
 			compatible = "renesas,usbhs-r9a07g054",
-				     "renesas,rza2-usbhs";
+				     "renesas,rzg2l-usbhs";
 			reg = <0 0x11c60000 0 0x10000>;
 			interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,

diff --git a/src/arm64/renesas/rzg2ul-smarc.dtsi b/src/arm64/renesas/rzg2ul-smarc.dtsi
index de59099..4338609 100644
--- a/src/arm64/renesas/rzg2ul-smarc.dtsi
+++ b/src/arm64/renesas/rzg2ul-smarc.dtsi

@@ -5,6 +5,7 @@
  * Copyright (C) 2022 Renesas Electronics Corp.
  */
 
+#include <dt-bindings/gpio/gpio.h>
 #include "rzg2ul-smarc-pinfunction.dtsi"
 #include "rz-smarc-common.dtsi"
 
@@ -23,6 +24,63 @@
 &i2c0 {
 	clock-frequency = <400000>;
 
+	da9062: pmic@58 {
+		compatible = "dlg,da9062";
+		reg = <0x58>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio {
+			compatible = "dlg,da9062-gpio";
+		};
+
+		onkey {
+			compatible = "dlg,da9062-onkey";
+		};
+
+		pmic-good-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PMIC_PGOOD";
+		};
+
+		rtc {
+			compatible = "dlg,da9062-rtc";
+		};
+
+		sd0-pwr-sel-hog {
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "SD0_PWR_SEL";
+		};
+
+		sd1-pwr-sel-hog {
+			gpio-hog;
+			gpios = <2 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "SD1_PWR_SEL";
+		};
+
+		sw-et0-en-hog {
+			gpio-hog;
+			gpios = <3 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "SW_ET0_EN#";
+		};
+
+		thermal {
+			compatible = "dlg,da9062-thermal";
+			status = "disabled";
+		};
+
+		watchdog {
+			compatible = "dlg,da9062-watchdog";
+			status = "disabled";
+		};
+	};
+
 	versa3: clock-generator@68 {
 		compatible = "renesas,5p35023";
 		reg = <0x68>;

diff --git a/src/arm64/renesas/rzg3s-smarc-som.dtsi b/src/arm64/renesas/rzg3s-smarc-som.dtsi
index acac466..8a3d302 100644
--- a/src/arm64/renesas/rzg3s-smarc-som.dtsi
+++ b/src/arm64/renesas/rzg3s-smarc-som.dtsi

@@ -25,7 +25,7 @@
  *	SW_OFF - SD2 is connected to SoC
  *	SW_ON  - SCIF1, SSI0, IRQ0, IRQ1 connected to SoC
  */
-#define SW_CONFIG2	SW_ON
+#define SW_CONFIG2	SW_OFF
 #define SW_CONFIG3	SW_ON
 
 / {
@@ -36,8 +36,8 @@
 #if SW_CONFIG3 == SW_OFF
 		mmc2 = &sdhi2;
 #else
-		eth0 = &eth0;
-		eth1 = &eth1;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
 #endif
 	};
 

diff --git a/src/arm64/rockchip/rk3308-rock-pi-s.dts b/src/arm64/rockchip/rk3308-rock-pi-s.dts
index b47fe02..079101c 100644
--- a/src/arm64/rockchip/rk3308-rock-pi-s.dts
+++ b/src/arm64/rockchip/rk3308-rock-pi-s.dts

@@ -5,6 +5,8 @@
  */
 
 /dts-v1/;
+
+#include <dt-bindings/leds/common.h>
 #include "rk3308.dtsi"
 
 / {
@@ -24,17 +26,21 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&green_led_gio>, <&heartbeat_led_gpio>;
+		pinctrl-0 = <&green_led>, <&heartbeat_led>;
 
 		green-led {
+			color = <LED_COLOR_ID_GREEN>;
 			default-state = "on";
+			function = LED_FUNCTION_POWER;
 			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
 			label = "rockpis:green:power";
 			linux,default-trigger = "default-on";
 		};
 
 		blue-led {
+			color = <LED_COLOR_ID_BLUE>;
 			default-state = "on";
+			function = LED_FUNCTION_HEARTBEAT;
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
 			label = "rockpis:blue:user";
 			linux,default-trigger = "heartbeat";
@@ -126,10 +132,12 @@
 };
 
 &emmc {
-	bus-width = <4>;
 	cap-mmc-highspeed;
-	mmc-hs200-1_8v;
+	cap-sd-highspeed;
+	no-sdio;
 	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
 	vmmc-supply = <&vcc_io>;
 	status = "okay";
 };
@@ -214,11 +222,11 @@
 	pinctrl-0 = <&rtc_32k>;
 
 	leds {
-		green_led_gio: green-led-gpio {
+		green_led: green-led {
 			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		heartbeat_led_gpio: heartbeat-led-gpio {
+		heartbeat_led: heartbeat-led {
 			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};

diff --git a/src/arm64/rockchip/rk3308.dtsi b/src/arm64/rockchip/rk3308.dtsi
index cfc0a87..c00da15 100644
--- a/src/arm64/rockchip/rk3308.dtsi
+++ b/src/arm64/rockchip/rk3308.dtsi

@@ -578,6 +578,48 @@
 		#dma-cells = <1>;
 	};
 
+	/*
+	 * - can be clock producer or consumer
+	 * - up to 8 capture channels and 2 playback channels
+	 * - connected internally to audio codec
+	 */
+	i2s_8ch_2: i2s@ff320000 {
+		compatible = "rockchip,rk3308-i2s-tdm";
+		reg = <0x0 0xff320000 0x0 0x1000>;
+		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		clocks = <&cru SCLK_I2S2_8CH_TX>,
+			 <&cru SCLK_I2S2_8CH_RX>,
+			 <&cru HCLK_I2S2_8CH>;
+		dmas = <&dmac1 5>, <&dmac1 4>;
+		dma-names = "rx", "tx";
+		resets = <&cru SRST_I2S2_8CH_TX_M>, <&cru SRST_I2S2_8CH_RX_M>;
+		reset-names = "tx-m", "rx-m";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	/*
+	 * - can be clock consumer only
+	 * - up to 4 capture channels, no playback
+	 * - connected internally to audio codec
+	 */
+	i2s_8ch_3: i2s@ff330000 {
+		compatible = "rockchip,rk3308-i2s-tdm";
+		reg = <0x0 0xff330000 0x0 0x1000>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		clocks = <&cru SCLK_I2S3_8CH_TX>,
+			 <&cru SCLK_I2S3_8CH_RX>,
+			 <&cru HCLK_I2S3_8CH>;
+		dmas = <&dmac1 7>;
+		dma-names = "rx";
+		resets = <&cru SRST_I2S3_8CH_TX_M>, <&cru SRST_I2S3_8CH_RX_M>;
+		reset-names = "tx-m", "rx-m";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
 	i2s_2ch_0: i2s@ff350000 {
 		compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s";
 		reg = <0x0 0xff350000 0x0 0x1000>;
@@ -761,6 +803,20 @@
 		assigned-clock-rates = <32768>;
 	};
 
+	codec: codec@ff560000 {
+		compatible = "rockchip,rk3308-codec";
+		reg = <0x0 0xff560000 0x0 0x10000>;
+		rockchip,grf = <&grf>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		clocks = <&cru SCLK_I2S2_8CH_TX_OUT>,
+			 <&cru SCLK_I2S2_8CH_RX_OUT>,
+			 <&cru PCLK_ACODEC>;
+		reset-names = "codec";
+		resets = <&cru SRST_ACODEC_P>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
 	gic: interrupt-controller@ff580000 {
 		compatible = "arm,gic-400";
 		reg = <0x0 0xff581000 0x0 0x1000>,

diff --git a/src/arm64/rockchip/rk3326-gameforce-chi.dts b/src/arm64/rockchip/rk3326-gameforce-chi.dts
new file mode 100644
index 0000000..579261b
--- /dev/null
+++ b/src/arm64/rockchip/rk3326-gameforce-chi.dts

@@ -0,0 +1,809 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Chris Morgan <macromorgan@hotmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3326.dtsi"
+
+/ {
+	model = "GameForce Chi";
+	compatible = "gameforce,chi", "rockchip,rk3326";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &sdio;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	adc_joystick: adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 0>,
+			      <&saradc 1>;
+		poll-interval = <100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <850 175>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <800 190>;
+			linux,code = <ABS_X>;
+		};
+	};
+
+	adc_keys: adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <60>;
+
+		button-1 {
+			label = "HAPPY1";
+			linux,code = <BTN_TRIGGER_HAPPY1>;
+			press-threshold-microvolt = <15000>;
+		};
+
+		button-2 {
+			label = "HAPPY2";
+			linux,code = <BTN_TRIGGER_HAPPY2>;
+			press-threshold-microvolt = <300000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_bl>;
+		pwms = <&pwm1 0 25000 0>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <1500000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <180000>;
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4106000 100>, <4071000 95>, <4018000 90>, <3975000 85>,
+					<3946000 80>, <3908000 75>, <3877000 70>, <3853000 65>,
+					<3834000 60>, <3816000 55>, <3802000 50>, <3788000 45>,
+					<3774000 40>, <3760000 35>, <3748000 30>, <3735000 25>,
+					<3718000 20>, <3697000 15>, <3685000 10>, <3625000 5>,
+					<3400000 0>;
+		voltage-max-design-microvolt = <4250000>;
+		voltage-min-design-microvolt = <3400000>;
+	};
+
+	gpio_leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		red_led: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+		};
+
+		green_led: led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue_led: led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;
+		};
+
+		white_led: led-3 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
+		};
+
+		chg_led: led-4 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_CHARGING;
+			gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>;
+		};
+
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&btn_pins_ctrl>;
+		pinctrl-names = "default";
+
+		button-a {
+			gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>;
+			label = "EAST";
+			linux,code = <BTN_EAST>;
+		};
+
+		button-b {
+			gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+			label = "SOUTH";
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-home {
+			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "HOME";
+			linux,code = <BTN_MODE>;
+		};
+
+		button-l1 {
+			gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "TL";
+			linux,code = <BTN_TL>;
+		};
+
+		button-l2 {
+			gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "TL2";
+			linux,code = <BTN_TL2>;
+		};
+
+		button-left {
+			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+
+		button-r1 {
+			gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "TR";
+			linux,code = <BTN_TR>;
+		};
+
+		button-r2 {
+			gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "TR2";
+			linux,code = <BTN_TR2>;
+		};
+
+		button-right {
+			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+
+		button-select {
+			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "SELECT";
+			linux,code = <BTN_SELECT>;
+		};
+
+		button-start {
+			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "START";
+			linux,code = <BTN_START>;
+		};
+
+		button-up {
+			gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
+			label = "NORTH";
+			linux,code = <BTN_NORTH>;
+		};
+
+		button-y {
+			gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
+			label = "WEST";
+			linux,code = <BTN_WEST>;
+		};
+	};
+
+	multi-led {
+		compatible = "leds-group-multicolor";
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_KBD_BACKLIGHT;
+		leds = <&red_led>, <&green_led>, <&blue_led>;
+	};
+
+	spk_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&spk_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		pinctrl-0 = <&hp_det>;
+		pinctrl-names = "default";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,aux-devs = <&spk_amp>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "Speaker Amp OUTL",
+			"Internal Speakers", "Speaker Amp OUTR",
+			"Speaker Amp INL", "HPOL",
+			"Speaker Amp INR", "HPOR";
+		simple-audio-card,pin-switches = "Internal Speakers";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_2ch>;
+		};
+	};
+
+	vibrator_left: pwm-vibrator-l {
+		compatible = "pwm-vibrator";
+		pwm-names = "enable";
+		pwms = <&pwm4 0 25000 0>;
+	};
+
+	vibrator_right: pwm-vibrator-r {
+		compatible = "pwm-vibrator";
+		pwm-names = "enable";
+		pwms = <&pwm5 0 25000 0>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk817 1>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+	};
+
+	vccsys: vccsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v8_sys";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	internal_display: panel@0 {
+		reg = <0>;
+		compatible = "gameforce,chi-panel";
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_lcd>;
+		vcc-supply = <&vcc_lcd>;
+		reset-gpios = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <16>;
+	i2c-scl-rising-time-ns = <280>;
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		#clock-cells = <1>;
+		clock-names = "mclk";
+		clock-output-names = "rk808-clkout1", "xin32k";
+		clocks = <&cru SCLK_I2S1_OUT>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PC1 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+		pinctrl-names = "default";
+		#sound-dai-cells = <0>;
+		system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vccsys>;
+		vcc2-supply = <&vccsys>;
+		vcc3-supply = <&vccsys>;
+		vcc4-supply = <&vccsys>;
+		vcc5-supply = <&vccsys>;
+		vcc6-supply = <&vccsys>;
+		vcc7-supply = <&vcc_3v0>;
+		vcc8-supply = <&vccsys>;
+		vcc9-supply = <&dcdc_boost>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1150000>;
+				regulator-min-microvolt = <950000>;
+				regulator-name = "vdd_logic";
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1350000>;
+				regulator-min-microvolt = <950000>;
+				regulator-name = "vdd_arm";
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v0: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3000000>;
+				regulator-min-microvolt = <3000000>;
+				regulator-name = "vcc_3v0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <1000000>;
+				regulator-name = "vdd_1v0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_3v0_pmu: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3000000>;
+				regulator-min-microvolt = <3000000>;
+				regulator-name = "vcc_3v0_pmu";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vccio_sd";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_sd";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_bl: LDO_REG7 {
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_bl";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-max-microvolt = <2800000>;
+				regulator-min-microvolt = <2800000>;
+				regulator-name = "vcc_lcd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			vcc_wifi: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_wifi";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			dcdc_boost: BOOST {
+				regulator-max-microvolt = <5000000>;
+				regulator-min-microvolt = <5000000>;
+				regulator-name = "dcdc_boost";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			otg_switch: OTG_SWITCH {
+				regulator-name = "otg_switch";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		rk817_charger: charger {
+			monitored-battery = <&battery>;
+			rockchip,resistor-sense-micro-ohms = <10000>;
+			rockchip,sleep-enter-current-microamp = <300000>;
+			rockchip,sleep-filter-current-microamp = <100000>;
+		};
+	};
+};
+
+&i2s1_2ch {
+	status = "okay";
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v0_pmu>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v0>;
+	vccio4-supply = <&vcc_3v0>;
+	vccio5-supply = <&vcc_3v0>;
+	vccio6-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pinctrl {
+	bluetooth-pins {
+		bt_reset: bt-reset {
+			rockchip,pins =
+				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake_dev: bt-wake-dev {
+			rockchip,pins =
+				<0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins =
+				<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins =
+				<2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-btns {
+		btn_pins_ctrl: btn-pins-ctrl {
+			rockchip,pins =
+				<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-leds {
+		led_pins: led-pins {
+			rockchip,pins =
+				<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
+				<3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>,
+				<3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>,
+				<3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>,
+				<3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins =
+				<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc_slppin_gpio {
+			rockchip,pins =
+				<0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_rst: soc_slppin_rst {
+			rockchip,pins =
+				<0 RK_PA4 2 &pcfg_pull_none>;
+		};
+
+		soc_slppin_slp: soc_slppin_slp {
+			rockchip,pins =
+				<0 RK_PA4 1 &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	speaker {
+		spk_amp_enable_h: spk-amp-enable-h {
+			rockchip,pins =
+				<2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc_1v8>;
+	pmuio2-supply = <&vcc_3v0_pmu>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&pwm5 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	no-mmc;
+	no-sd;
+	non-removable;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdmmc {
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	no-sdio;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sfc {
+	#address-cells = <1>;
+	pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
+	pinctrl-names = "default";
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_otg: otg-port {
+		status = "okay";
+	};
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+/*
+ * The right ADC joystick exists connected to an unknown ADC
+ * controller which can be communicated with via uart0. This ADC device
+ * is an 8-pin SOIC with no markings located right next to the left ADC
+ * joystick ribbon cable. The pinout for this ADC controller appears to
+ * be pin 1 - VCC (2.8v), pin 2 - 1.8v (clk maybe?), pin 3 - GPIO 10,
+ * pin 4 - unknown, pin 5 - unknown, pin 6 - analog in, pin 7 - analog in,
+ * pin 8 - ground. There is currently a userspace UART driver for this
+ * device but it only works with the BSP joystick driver.
+ */
+&uart0 {
+	status = "okay";
+};
+
+/*
+ * Bluetooth was not working on BSP and is not currently working on
+ * mainline due to missing firmware. Bluetooth requires removal of DMA
+ * or else it will not probe.
+ */
+&uart1 {
+	/delete-property/ dma-names;
+	/delete-property/ dmas;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth: bluetooth {
+		compatible = "realtek,rtl8723ds-bt";
+		device-wake-gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&bt_reset>, <&bt_wake_dev>, <&bt_wake_host>;
+		pinctrl-names = "default";
+	};
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m1_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};

diff --git a/src/arm64/rockchip/rk3328-rock-pi-e.dts b/src/arm64/rockchip/rk3328-rock-pi-e.dts
index f09d60b..a608a21 100644
--- a/src/arm64/rockchip/rk3328-rock-pi-e.dts
+++ b/src/arm64/rockchip/rk3328-rock-pi-e.dts

@@ -241,8 +241,8 @@
 	rk805: pmic@18 {
 		compatible = "rockchip,rk805";
 		reg = <0x18>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		#clock-cells = <1>;
 		clock-output-names = "xin32k", "rk805-clkout2";
 		gpio-controller;

diff --git a/src/arm64/rockchip/rk3328.dtsi b/src/arm64/rockchip/rk3328.dtsi
index b6f0450..07dcc94 100644
--- a/src/arm64/rockchip/rk3328.dtsi
+++ b/src/arm64/rockchip/rk3328.dtsi

@@ -46,8 +46,14 @@
 			cpu-idle-states = <&CPU_SLEEP>;
 			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
-			next-level-cache = <&l2>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu1: cpu@1 {
@@ -59,8 +65,14 @@
 			cpu-idle-states = <&CPU_SLEEP>;
 			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
-			next-level-cache = <&l2>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu2: cpu@2 {
@@ -72,8 +84,14 @@
 			cpu-idle-states = <&CPU_SLEEP>;
 			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
-			next-level-cache = <&l2>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu3: cpu@3 {
@@ -85,8 +103,14 @@
 			cpu-idle-states = <&CPU_SLEEP>;
 			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
-			next-level-cache = <&l2>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		idle-states {
@@ -102,10 +126,13 @@
 			};
 		};
 
-		l2: l2-cache0 {
+		l2_cache: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x40000>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
 		};
 	};
 

diff --git a/src/arm64/rockchip/rk3368-evb.dtsi b/src/arm64/rockchip/rk3368-evb.dtsi
index b48b98c..e5c0dbf 100644
--- a/src/arm64/rockchip/rk3368-evb.dtsi
+++ b/src/arm64/rockchip/rk3368-evb.dtsi

@@ -17,7 +17,7 @@
 		stdout-path = "serial2:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};

diff --git a/src/arm64/rockchip/rk3368-orion-r68-meta.dts b/src/arm64/rockchip/rk3368-orion-r68-meta.dts
index dcee2e2..23ae2d9 100644
--- a/src/arm64/rockchip/rk3368-orion-r68-meta.dts
+++ b/src/arm64/rockchip/rk3368-orion-r68-meta.dts

@@ -21,7 +21,7 @@
 		stdout-path = "serial2:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};

diff --git a/src/arm64/rockchip/rk3368-r88.dts b/src/arm64/rockchip/rk3368-r88.dts
index b16b7ca..7f14206 100644
--- a/src/arm64/rockchip/rk3368-r88.dts
+++ b/src/arm64/rockchip/rk3368-r88.dts

@@ -21,7 +21,7 @@
 		stdout-path = "serial2:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};

diff --git a/src/arm64/rockchip/rk3368.dtsi b/src/arm64/rockchip/rk3368.dtsi
index 62af0cb..73618df 100644
--- a/src/arm64/rockchip/rk3368.dtsi
+++ b/src/arm64/rockchip/rk3368.dtsi

@@ -141,7 +141,7 @@
 	};
 
 	arm-pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
@@ -793,6 +793,7 @@
 		dma-names = "tx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spdif_tx>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
@@ -804,6 +805,7 @@
 		clocks = <&cru SCLK_I2S_2CH>, <&cru HCLK_I2S_2CH>;
 		dmas = <&dmac_bus 6>, <&dmac_bus 7>;
 		dma-names = "tx", "rx";
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
@@ -817,6 +819,7 @@
 		dma-names = "tx", "rx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s_8ch_bus>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 

diff --git a/src/arm64/rockchip/rk3399-gru.dtsi b/src/arm64/rockchip/rk3399-gru.dtsi
index 789fd0d..3cd63d1 100644
--- a/src/arm64/rockchip/rk3399-gru.dtsi
+++ b/src/arm64/rockchip/rk3399-gru.dtsi

@@ -450,7 +450,7 @@
 			dlg,btn-cfg = <50>;
 			dlg,mic-det-thr = <500>;
 			dlg,jack-ins-deb = <20>;
-			dlg,jack-det-rate = "32ms_64ms";
+			dlg,jack-det-rate = "32_64";
 			dlg,jack-rem-deb = <1>;
 
 			dlg,a-d-btn-thr = <0xa>;

diff --git a/src/arm64/rockchip/rk3399-pinephone-pro.dts b/src/arm64/rockchip/rk3399-pinephone-pro.dts
index 61f3fec..e5709c7 100644
--- a/src/arm64/rockchip/rk3399-pinephone-pro.dts
+++ b/src/arm64/rockchip/rk3399-pinephone-pro.dts

@@ -16,7 +16,7 @@
 #include "rk3399-opp.dtsi"
 
 / {
-	model = "Pine64 PinePhonePro";
+	model = "Pine64 PinePhone Pro";
 	compatible = "pine64,pinephone-pro", "rockchip,rk3399";
 	chassis-type = "handset";
 

diff --git a/src/arm64/rockchip/rk3399-rock-4c-plus.dts b/src/arm64/rockchip/rk3399-rock-4c-plus.dts
index 7baf9d1..972aea8 100644
--- a/src/arm64/rockchip/rk3399-rock-4c-plus.dts
+++ b/src/arm64/rockchip/rk3399-rock-4c-plus.dts

@@ -151,6 +151,7 @@
 };
 
 &emmc_phy {
+	rockchip,enable-strobe-pulldown;
 	status = "okay";
 };
 
@@ -549,7 +550,8 @@
 &sdhci {
 	max-frequency = <150000000>;
 	bus-width = <8>;
-	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
 	non-removable;
 	status = "okay";
 };

diff --git a/src/arm64/rockchip/rk3399-rock-pi-4.dtsi b/src/arm64/rockchip/rk3399-rock-pi-4.dtsi
index 281a121..b9d6284 100644
--- a/src/arm64/rockchip/rk3399-rock-pi-4.dtsi
+++ b/src/arm64/rockchip/rk3399-rock-pi-4.dtsi

@@ -194,6 +194,7 @@
 };
 
 &emmc_phy {
+	rockchip,enable-strobe-pulldown;
 	status = "okay";
 };
 
@@ -648,7 +649,8 @@
 &sdhci {
 	max-frequency = <150000000>;
 	bus-width = <8>;
-	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
 	non-removable;
 	status = "okay";
 };

diff --git a/src/arm64/rockchip/rk3566-anbernic-rg353p.dts b/src/arm64/rockchip/rk3566-anbernic-rg353p.dts
index 8aa93c6..a73cf30 100644
--- a/src/arm64/rockchip/rk3566-anbernic-rg353p.dts
+++ b/src/arm64/rockchip/rk3566-anbernic-rg353p.dts

@@ -8,7 +8,7 @@
 #include "rk3566-anbernic-rg353x.dtsi"
 
 / {
-	model = "RG353P";
+	model = "Anbernic RG353P";
 	compatible = "anbernic,rg353p", "rockchip,rk3566";
 
 	aliases {

diff --git a/src/arm64/rockchip/rk3566-anbernic-rg353ps.dts b/src/arm64/rockchip/rk3566-anbernic-rg353ps.dts
index b211973..ca5284e 100644
--- a/src/arm64/rockchip/rk3566-anbernic-rg353ps.dts
+++ b/src/arm64/rockchip/rk3566-anbernic-rg353ps.dts

@@ -8,7 +8,7 @@
 #include "rk3566-anbernic-rg353x.dtsi"
 
 / {
-	model = "RG353PS";
+	model = "Anbernic RG353PS";
 	compatible = "anbernic,rg353ps", "rockchip,rk3566";
 
 	aliases {

diff --git a/src/arm64/rockchip/rk3566-anbernic-rg353v.dts b/src/arm64/rockchip/rk3566-anbernic-rg353v.dts
index f49ce29..e9954a3 100644
--- a/src/arm64/rockchip/rk3566-anbernic-rg353v.dts
+++ b/src/arm64/rockchip/rk3566-anbernic-rg353v.dts

@@ -8,7 +8,7 @@
 #include "rk3566-anbernic-rg353x.dtsi"
 
 / {
-	model = "RG353V";
+	model = "Anbernic RG353V";
 	compatible = "anbernic,rg353v", "rockchip,rk3566";
 
 	aliases {

diff --git a/src/arm64/rockchip/rk3566-anbernic-rg353vs.dts b/src/arm64/rockchip/rk3566-anbernic-rg353vs.dts
index a7dc462..90da438 100644
--- a/src/arm64/rockchip/rk3566-anbernic-rg353vs.dts
+++ b/src/arm64/rockchip/rk3566-anbernic-rg353vs.dts

@@ -8,7 +8,7 @@
 #include "rk3566-anbernic-rg353x.dtsi"
 
 / {
-	model = "RG353VS";
+	model = "Anbernic RG353VS";
 	compatible = "anbernic,rg353vs", "rockchip,rk3566";
 
 	aliases {

diff --git a/src/arm64/rockchip/rk3566-anbernic-rg503.dts b/src/arm64/rockchip/rk3566-anbernic-rg503.dts
index 94e6dd6..74cf313 100644
--- a/src/arm64/rockchip/rk3566-anbernic-rg503.dts
+++ b/src/arm64/rockchip/rk3566-anbernic-rg503.dts

@@ -8,7 +8,7 @@
 #include "rk3566-anbernic-rgxx3.dtsi"
 
 / {
-	model = "RG503";
+	model = "Anbernic RG503";
 	compatible = "anbernic,rg503", "rockchip,rk3566";
 
 	aliases {

diff --git a/src/arm64/rockchip/rk3566-anbernic-rgxx3.dtsi b/src/arm64/rockchip/rk3566-anbernic-rgxx3.dtsi
index 18b8c2e..233eade 100644
--- a/src/arm64/rockchip/rk3566-anbernic-rgxx3.dtsi
+++ b/src/arm64/rockchip/rk3566-anbernic-rgxx3.dtsi

@@ -10,6 +10,8 @@
 #include "rk3566.dtsi"
 
 / {
+	chassis-type = "handset";
+
 	chosen: chosen {
 		stdout-path = "serial2:1500000n8";
 	};
@@ -623,9 +625,12 @@
 	cap-sdio-irq;
 	keep-power-in-suspend;
 	mmc-pwrseq = <&sdio_pwrseq>;
+	no-mmc;
+	no-sd;
 	non-removable;
 	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
 	pinctrl-names = "default";
+	sd-uhs-sdr50;
 	vmmc-supply = <&vcc_wifi>;
 	vqmmc-supply = <&vcca1v8_pmu>;
 	status = "okay";

diff --git a/src/arm64/rockchip/rk3566-powkiddy-rgb30.dts b/src/arm64/rockchip/rk3566-powkiddy-rgb30.dts
index 1f567a1..952b1b2 100644
--- a/src/arm64/rockchip/rk3566-powkiddy-rgb30.dts
+++ b/src/arm64/rockchip/rk3566-powkiddy-rgb30.dts

@@ -8,7 +8,7 @@
 #include "rk3566-powkiddy-rk2023.dtsi"
 
 / {
-	model = "RGB30";
+	model = "Powkiddy RGB30";
 	compatible = "powkiddy,rgb30", "rockchip,rk3566";
 };
 

diff --git a/src/arm64/rockchip/rk3566-powkiddy-rk2023.dts b/src/arm64/rockchip/rk3566-powkiddy-rk2023.dts
index bc9933d..72890f7 100644
--- a/src/arm64/rockchip/rk3566-powkiddy-rk2023.dts
+++ b/src/arm64/rockchip/rk3566-powkiddy-rk2023.dts

@@ -8,7 +8,7 @@
 #include "rk3566-powkiddy-rk2023.dtsi"
 
 / {
-	model = "RK2023";
+	model = "Powkiddy RK2023";
 	compatible = "powkiddy,rk2023", "rockchip,rk3566";
 };
 

diff --git a/src/arm64/rockchip/rk3566-powkiddy-rk2023.dtsi b/src/arm64/rockchip/rk3566-powkiddy-rk2023.dtsi
index 3ab751a..bd33271 100644
--- a/src/arm64/rockchip/rk3566-powkiddy-rk2023.dtsi
+++ b/src/arm64/rockchip/rk3566-powkiddy-rk2023.dtsi

@@ -10,6 +10,8 @@
 #include "rk3566.dtsi"
 
 / {
+	chassis-type = "handset";
+
 	aliases {
 		mmc1 = &sdmmc0;
 		mmc2 = &sdmmc1;

diff --git a/src/arm64/rockchip/rk3566-powkiddy-x55.dts b/src/arm64/rockchip/rk3566-powkiddy-x55.dts
index 4786b19..5a648db 100644
--- a/src/arm64/rockchip/rk3566-powkiddy-x55.dts
+++ b/src/arm64/rockchip/rk3566-powkiddy-x55.dts

@@ -11,6 +11,7 @@
 
 / {
 	model = "Powkiddy x55";
+	chassis-type = "handset";
 	compatible = "powkiddy,x55", "rockchip,rk3566";
 
 	aliases {

diff --git a/src/arm64/rockchip/rk3566-quartz64-a.dts b/src/arm64/rockchip/rk3566-quartz64-a.dts
index 59843a7..0b191d8 100644
--- a/src/arm64/rockchip/rk3566-quartz64-a.dts
+++ b/src/arm64/rockchip/rk3566-quartz64-a.dts

@@ -8,7 +8,7 @@
 #include "rk3566.dtsi"
 
 / {
-	model = "Pine64 RK3566 Quartz64-A Board";
+	model = "Pine64 Quartz64 Model A";
 	compatible = "pine64,quartz64-a", "rockchip,rk3566";
 
 	aliases {

diff --git a/src/arm64/rockchip/rk3566-quartz64-b.dts b/src/arm64/rockchip/rk3566-quartz64-b.dts
index 2d92713..b908ce0 100644
--- a/src/arm64/rockchip/rk3566-quartz64-b.dts
+++ b/src/arm64/rockchip/rk3566-quartz64-b.dts

@@ -8,7 +8,7 @@
 #include "rk3566.dtsi"
 
 / {
-	model = "Pine64 RK3566 Quartz64-B Board";
+	model = "Pine64 Quartz64 Model B";
 	compatible = "pine64,quartz64-b", "rockchip,rk3566";
 
 	aliases {
@@ -289,7 +289,7 @@
 				regulator-name = "vdd_gpu";
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-min-microvolt = <900000>;
+				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1350000>;
 				regulator-ramp-delay = <6001>;
 

diff --git a/src/arm64/rockchip/rk3566-rock-3c.dts b/src/arm64/rockchip/rk3566-rock-3c.dts
new file mode 100644
index 0000000..b242409
--- /dev/null
+++ b/src/arm64/rockchip/rk3566-rock-3c.dts

@@ -0,0 +1,726 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "Radxa ROCK 3C";
+	compatible = "radxa,rock-3c", "rockchip,rk3566";
+
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc1;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&user_led2>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_h>;
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <5000000>;
+		reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc5v_dcin: vcc5v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr_en>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v_dcin>;
+	};
+
+	vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb30_host_en>;
+		regulator-name = "vcc5v0_usb30_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_cam: vcc-cam-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_cam_en>;
+		regulator-name = "vcc_cam";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc_mipi: vcc-mipi-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_mipi_en>;
+		regulator-name = "vcc_mipi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
+	clock_in_out = "input";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_rgmii_bus
+		     &gmac1m1_clkinout>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
+		system-power-controller;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+		#clock-cells = <1>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "belling,bl24c16a", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_h>;
+	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	bluetooth {
+		bt_reg_on_h: bt-reg-on-h {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host_h: bt-wake-host-h {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_h: bt-host-wake-h {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	cam {
+		vcc_cam_en: vcc_cam_en {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	display {
+		vcc_mipi_en: vcc_mipi_en {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		user_led2: user-led2 {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_pwr_en: pcie-pwr-en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_reset_h: pcie-reset-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb30_host_en: vcc5v0-usb30-host-en {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake_h: wifi-host-wake-h {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_reg_on_h: wifi-reg-on-h {
+			rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcca1v8_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcca1v8_pmu>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vcca1v8_pmu>;
+	status = "okay";
+};
+
+&sfc {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <120000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_ctsn &uart1m0_rtsn &uart1m0_xfer>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb30_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb30_host>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb30_host>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};

diff --git a/src/arm64/rockchip/rk3566-soquartz-blade.dts b/src/arm64/rockchip/rk3566-soquartz-blade.dts
index fdbf1c7..fdbb4a6 100644
--- a/src/arm64/rockchip/rk3566-soquartz-blade.dts
+++ b/src/arm64/rockchip/rk3566-soquartz-blade.dts

@@ -10,7 +10,7 @@
 #include "rk3566-soquartz.dtsi"
 
 / {
-	model = "PINE64 RK3566 SOQuartz on Blade carrier board";
+	model = "Pine64 SOQuartz on Blade carrier board";
 	compatible = "pine64,soquartz-blade", "pine64,soquartz", "rockchip,rk3566";
 
 	aliases {

diff --git a/src/arm64/rockchip/rk3566-soquartz-cm4.dts b/src/arm64/rockchip/rk3566-soquartz-cm4.dts
index 6ed3fa4..2b6f0df 100644
--- a/src/arm64/rockchip/rk3566-soquartz-cm4.dts
+++ b/src/arm64/rockchip/rk3566-soquartz-cm4.dts

@@ -5,7 +5,7 @@
 #include "rk3566-soquartz.dtsi"
 
 / {
-	model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board";
+	model = "Pine64 SOQuartz on CM4-IO carrier board";
 	compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566";
 
 	aliases {

diff --git a/src/arm64/rockchip/rk3566-soquartz-model-a.dts b/src/arm64/rockchip/rk3566-soquartz-model-a.dts
index f2095df..9a6a632 100644
--- a/src/arm64/rockchip/rk3566-soquartz-model-a.dts
+++ b/src/arm64/rockchip/rk3566-soquartz-model-a.dts

@@ -5,7 +5,7 @@
 #include "rk3566-soquartz.dtsi"
 
 / {
-	model = "PINE64 RK3566 SOQuartz on Model A carrier board";
+	model = "Pine64 SOQuartz on Model A carrier board";
 	compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566";
 
 	aliases {

diff --git a/src/arm64/rockchip/rk3566-soquartz.dtsi b/src/arm64/rockchip/rk3566-soquartz.dtsi
index bfb7b95..dd4e9c1 100644
--- a/src/arm64/rockchip/rk3566-soquartz.dtsi
+++ b/src/arm64/rockchip/rk3566-soquartz.dtsi

@@ -8,7 +8,7 @@
 #include "rk3566.dtsi"
 
 / {
-	model = "Pine64 RK3566 SoQuartz SOM";
+	model = "Pine64 SOQuartz system on module";
 	compatible = "pine64,soquartz", "rockchip,rk3566";
 
 	aliases {

diff --git a/src/arm64/rockchip/rk3568-mecsbc.dts b/src/arm64/rockchip/rk3568-mecsbc.dts
new file mode 100644
index 0000000..c2dfffc
--- /dev/null
+++ b/src/arm64/rockchip/rk3568-mecsbc.dts

@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "Protonic MECSBC";
+	compatible = "prt,mecsbc", "rockchip,rk3568";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	tas2562-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Speaker";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tas2562>;
+		};
+	};
+
+	vdd_gpu: regulator-vdd-gpu {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <915000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-settling-time-up-us = <250>;
+		pwm-dutycycle-range = <0 100>; /* dutycycle inverted 0% => 0.915V */
+	};
+
+	p3v3: regulator-p3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "p3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	p1v8: regulator-p1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc_sd: regulator-sd {
+		compatible = "regulator-gpio";
+		enable-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		regulator-name = "sdcard-gpio-supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <1800000 0x1>, <3300000 0x0>;
+	};
+
+	vdd_npu: regulator-vdd-npu {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
+		regulator-name = "vdd_npu";
+		regulator-min-microvolt = <915000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-settling-time-up-us = <250>;
+		pwm-dutycycle-range = <0 100>; /* dutycycle inverted 0% => 0.915V */
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-id";
+	clock_in_out = "output";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_clkinout
+		     &gmac1m1_rgmii_bus>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&gpu_opp_table {
+	compatible = "operating-points-v2";
+
+	opp-200000000 {
+		opp-hz = /bits/ 64 <200000000>;
+		opp-microvolt = <915000>;
+	};
+
+	opp-300000000 {
+		opp-hz = /bits/ 64 <300000000>;
+		opp-microvolt = <915000>;
+	};
+
+	opp-400000000 {
+		opp-hz = /bits/ 64 <400000000>;
+		opp-microvolt = <915000>;
+	};
+
+	opp-600000000 {
+		opp-hz = /bits/ 64 <600000000>;
+		opp-microvolt = <920000>;
+	};
+
+	opp-700000000 {
+		opp-hz = /bits/ 64 <700000000>;
+		opp-microvolt = <950000>;
+	};
+
+	opp-800000000 {
+		opp-hz = /bits/ 64 <800000000>;
+		opp-microvolt = <1000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@60 {
+		compatible = "fcs,fan53555";
+		reg = <0x60>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2m0_xfer>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3m0_xfer>;
+	status = "okay";
+
+	tas2562: amplifier@4c {
+		compatible = "ti,tas2562";
+		reg = <0x4c>;
+		#sound-dai-cells = <0>;
+		shutdown-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tas2562>;
+		interrupts = <RK_PD1 IRQ_TYPE_LEVEL_LOW>;
+		ti,imon-slot-no = <0>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp1075";
+		reg = <0x48>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf85363";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "rtcic_32kout";
+	};
+};
+
+&i2s1_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth_phy1_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie20m1_pins>;
+	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie30x2m1_pins>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&p3v3>;
+	status = "okay";
+};
+
+&pinctrl {
+	ethernet {
+		eth_phy1_rst: eth-phy1-rst {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	tas2562 {
+		pinctrl_tas2562: tas2562 {
+			rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&p3v3>;
+	pmuio2-supply = <&p3v3>;
+	vccio1-supply = <&p1v8>;
+	vccio2-supply = <&p1v8>;
+	vccio3-supply = <&vcc_sd>;
+	vccio4-supply = <&p1v8>;
+	vccio5-supply = <&p3v3>;
+	vccio6-supply = <&p1v8>;
+	vccio7-supply = <&p3v3>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1m0_pins>;
+};
+
+&pwm2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2m0_pins>;
+};
+
+&saradc {
+	vref-supply = <&p1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	vmmc-supply = <&p3v3>;
+	vqmmc-supply = <&p1v8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&p3v3>;
+	vqmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "host";
+	extcon = <&usb2phy0>;
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	status = "okay";
+};

diff --git a/src/arm64/rockchip/rk3568-rock-3a.dts b/src/arm64/rockchip/rk3568-rock-3a.dts
index a5e974e..ebdedea 100644
--- a/src/arm64/rockchip/rk3568-rock-3a.dts
+++ b/src/arm64/rockchip/rk3568-rock-3a.dts

@@ -8,7 +8,7 @@
 #include "rk3568.dtsi"
 
 / {
-	model = "Radxa ROCK3 Model A";
+	model = "Radxa ROCK 3A";
 	compatible = "radxa,rock3a", "rockchip,rk3568";
 
 	aliases {
@@ -757,6 +757,20 @@
 	status = "okay";
 };
 
+&sfc {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <104000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
 &tsadc {
 	rockchip,hw-tshut-mode = <1>;
 	rockchip,hw-tshut-polarity = <0>;

diff --git a/src/arm64/rockchip/rk3568-wolfvision-pf5-io-expander.dtso b/src/arm64/rockchip/rk3568-wolfvision-pf5-io-expander.dtso
new file mode 100644
index 0000000..ebcaeaf
--- /dev/null
+++ b/src/arm64/rockchip/rk3568-wolfvision-pf5-io-expander.dtso

@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device tree overlay for the WolfVision PF5 IO Expander board.
+ *
+ * Copyright (C) 2024 WolfVision GmbH.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/rk3568-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+&{/} {
+	gmac0_clkin: external-gmac0-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+		clock-output-names = "gmac0_clkin";
+		#clock-cells = <0>;
+	};
+
+	usb_host_vbus: usb-host-vbus-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_vbus_en>;
+		regulator-name = "usb_host_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v_in>;
+	};
+
+	vcc1v8_eth: vcc1v8-eth-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc1v8_eth_en>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "1v8_eth";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_eth: vcc3v3-eth-regulator {
+		compatible = "regulator-fixed";
+		enable-active-low;
+		gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_eth_enn>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "3v3_eth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>,
+			  <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RMII_SPEED>,
+				 <&gmac0_clkin>;
+	clock_in_out = "input";
+	phy-handle = <&dp83826>;
+	phy-mode = "rmii";
+	phy-supply = <&vcc3v3_eth>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_clkinout
+		     &gmac0_rx_er
+		     &gmac0_rx_bus2
+		     &gmac0_tx_bus2>;
+	status = "okay";
+};
+
+&mdio0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	dp83826: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD3 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth_wake_intn &eth_phy_rstn>;
+		reset-assert-us = <1000>;
+		reset-deassert-us = <2000>;
+		reset-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>;
+		wakeup-source;
+	};
+};
+
+&pinctrl {
+	ethernet {
+		eth_wake_intn: eth-wake-intn-pinctrl {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		eth_phy_rstn: eth-phy-rstn-pinctrl {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc1v8_eth_en: vcc1v8-eth-en-pinctrl {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc3v3_eth_enn: vcc3v3-eth-enn-pinctrl {
+			rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb_host_vbus_en: usb-host-vbus-en-pinctrl {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&usb_host1_xhci {
+	maximum-speed = "high-speed";
+	phys = <&usb2phy0_host>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&usb_host_vbus>;
+	status = "okay";
+};

diff --git a/src/arm64/rockchip/rk3568-wolfvision-pf5.dts b/src/arm64/rockchip/rk3568-wolfvision-pf5.dts
new file mode 100644
index 0000000..170b14f
--- /dev/null
+++ b/src/arm64/rockchip/rk3568-wolfvision-pf5.dts

@@ -0,0 +1,528 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device tree for the WolfVision PF5 mainboard.
+ *
+ * Copyright (C) 2024 WolfVision GmbH.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/regulator/ti,tps62864.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "WolfVision PF5";
+	compatible = "wolfvision,rk3568-pf5", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		mmc0 = &sdhci;
+		rtc0 = &pcf85623;
+		rtc1 = &rk809;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	hdmi_tx: hdmi-tx-connector {
+		compatible = "hdmi-connector";
+		hdmi-pwr-supply = <&hdmi_tx_5v>;
+		type = "a";
+
+		port {
+			hdmi_tx_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	hdmi_tx_5v: hdmi-tx-5v-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_tx_5v_en>;
+		regulator-name = "hdmi_tx_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v_in>;
+	};
+
+	pdm_codec: pdm-codec {
+		compatible = "dmic-codec";
+		num-channels = <1>;
+		#sound-dai-cells = <0>;
+	};
+
+	pdm_sound: pdm-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "microphone";
+
+		simple-audio-card,cpu {
+			sound-dai = <&pdm>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&pdm_codec>;
+		};
+	};
+
+	vcc12v_cam: vcc12v-cam-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc12v_cam_en>;
+		regulator-name = "12v_cam";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&vcc12v_in>;
+	};
+
+	vcc12v_in: vcc12v-in-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "12v_in";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v8_cam: vcc3v8-cam-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v8_cam_en>;
+		regulator-name = "3v8_cam";
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		vin-supply = <&vcc5v_in>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v_in>;
+	};
+
+	vcc5v_in: vcc5v-in-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "5v_in";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_in>;
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vcc0v9_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vcc0v9_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vcc0v9_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vcc0v9_cpu>;
+};
+
+&gpu {
+	mali-supply = <&vcc0v9_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vcc0v9a_image>;
+	avdd-1v8-supply = <&vcc1v8a_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_tx_out: endpoint {
+		remote-endpoint = <&hdmi_tx_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc5v_in>;
+		vcc2-supply = <&vcc5v_in>;
+		vcc3-supply = <&vcc5v_in>;
+		vcc4-supply = <&vcc5v_in>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc5v_in>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vcc0v9_logic: DCDC_REG1 {
+				regulator-name = "0v9_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc0v9_gpu: DCDC_REG2 {
+				regulator-name = "0v9_gpu";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v1_ddr4: DCDC_REG3 {
+				regulator-name = "1v1_ddr4";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc0v9_npu: DCDC_REG4 {
+				regulator-name = "0v9_npu";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8: DCDC_REG5 {
+				regulator-name = "1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc0v9a_image: LDO_REG1 {
+				regulator-name = "0v9a_image";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc0v9a: LDO_REG2 {
+				regulator-name = "0v9a";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc0v9a_pmu: LDO_REG3 {
+				regulator-name = "0v9a_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcc3v3_acodec: LDO_REG4 {
+				regulator-name = "3v3_acodec";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: LDO_REG5 {
+				regulator-name = "3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc1v8a: LDO_REG7 {
+				regulator-name = "1v8a";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8a_pmu: LDO_REG8 {
+				regulator-name = "1v8a_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8a_image: LDO_REG9 {
+				regulator-name = "1v8a_image";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sw: SWITCH_REG1 {
+				regulator-name = "3v3_sw";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	regulator@42 {
+		compatible = "ti,tps62869";
+		reg = <0x42>;
+
+		regulators {
+			vcc0v9_cpu: SW {
+				regulator-name = "0v9_cpu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <TPS62864_MODE_FPWM>;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1150000>;
+				vin-supply = <&vcc5v_in>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	pcf85623: rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&clk32k_in>;
+		quartz-load-femtofarads = <12500>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3m0_xfer>;
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4m1_xfer>;
+};
+
+&pdm {
+	pinctrl-0 = <&pdmm0_clk
+		     &pdmm0_sdi0>;
+	status = "okay";
+};
+
+&pinctrl {
+	cam {
+		vcc12v_cam_en: vcc12v-cam-en-pinctrl {
+			rockchip,pins = <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc3v8_cam_en: vcc3v8-cam-en-pinctrl {
+			rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hdmitx {
+		hdmi_tx_5v_en: hdmi-tx-5v-en-pinctrl {
+			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l-pinctrl {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vcc3v3_acodec>;
+	vccio2-supply = <&vcc1v8>;
+	vccio3-supply = <&vcc3v3_sd>;
+	vccio4-supply = <&vcc1v8>;
+	vccio5-supply = <&vcc1v8>;
+	vccio6-supply = <&vcc3v3_sw>;
+	vccio7-supply = <&vcc3v3_sw>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc1v8a>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	vmmc-supply = <&vcc3v3_sw>;
+	vqmmc-supply = <&vcc1v8>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "peripheral";
+	/* The following quirks are required since the bInterval is 1 and we
+	 * handle steady ISOC streaming. See Usecase 3 in commit 729dcffd1ed3
+	 * ("usb: dwc3: gadget: Add support for disabling U1 and U2 entries").
+	 */
+	snps,dis-u1-entry-quirk;
+	snps,dis-u2-entry-quirk;
+	/*
+	 * Without this quirk the available fifosize seems to be miscalculated
+	 * in cases where many endpoints are used. In one particular situation
+	 * 8 IN EPs and 3 OUT EPs where selected and lead to stalled transfers
+	 * without the resize quirk.
+	 */
+	tx-fifo-resize;
+
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP2>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};

diff --git a/src/arm64/rockchip/rk356x.dtsi b/src/arm64/rockchip/rk356x.dtsi
index 92f96ec..d8543b5 100644
--- a/src/arm64/rockchip/rk356x.dtsi
+++ b/src/arm64/rockchip/rk356x.dtsi

@@ -57,6 +57,13 @@
 			#cooling-cells = <2>;
 			enable-method = "psci";
 			operating-points-v2 = <&cpu0_opp_table>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l3_cache>;
 		};
 
 		cpu1: cpu@100 {
@@ -66,6 +73,13 @@
 			#cooling-cells = <2>;
 			enable-method = "psci";
 			operating-points-v2 = <&cpu0_opp_table>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l3_cache>;
 		};
 
 		cpu2: cpu@200 {
@@ -75,6 +89,13 @@
 			#cooling-cells = <2>;
 			enable-method = "psci";
 			operating-points-v2 = <&cpu0_opp_table>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l3_cache>;
 		};
 
 		cpu3: cpu@300 {
@@ -84,9 +105,29 @@
 			#cooling-cells = <2>;
 			enable-method = "psci";
 			operating-points-v2 = <&cpu0_opp_table>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l3_cache>;
 		};
 	};
 
+	/*
+	 * There are no private per-core L2 caches, but only the
+	 * L3 cache that appears to the CPU cores as L2 caches
+	 */
+	l3_cache: l3-cache {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+	};
+
 	cpu0_opp_table: opp-table-0 {
 		compatible = "operating-points-v2";
 		opp-shared;

diff --git a/src/arm64/rockchip/rk3588-armsom-sige7.dts b/src/arm64/rockchip/rk3588-armsom-sige7.dts
new file mode 100644
index 0000000..98c622b
--- /dev/null
+++ b/src/arm64/rockchip/rk3588-armsom-sige7.dts

@@ -0,0 +1,721 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3588.dtsi"
+
+/ {
+	model = "ArmSoM Sige7";
+	compatible = "armsom,sige7", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		dais = <&i2s0_8ch_p0>;
+		label = "rk3588-es8316";
+		hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_detect>;
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_rgb_g>;
+
+		led_green: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led_red: led-1 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 95 145 195 255>;
+		fan-supply = <&vcc5v0_sys>;
+		pwms = <&pwm1 0 50000 0>;
+		#cooling-cells = <2>;
+	};
+
+	vcc3v3_pcie2x1l2: vcc3v3-pcie2x1l2-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie2x1l2";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc3v3_pcie30: vcc3v3-pcie30-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc3v3_pcie30";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	es8316: audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+/* phy1 - right ethernet port */
+&pcie2x1l0 {
+	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+/* phy2 - WiFi */
+&pcie2x1l1 {
+	reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+/* phy0 - left ethernet port */
+&pcie2x1l2 {
+	reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x4 {
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie30>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led_rgb_g: led-rgb-g {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		led_rgb_r: led-rgb-r {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sound {
+		hp_detect: hp-detect {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&avcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <200000000>;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		spi-max-frequency = <1000000>;
+		reg = <0x0>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_2v0_pldo_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "avdd_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&usbdp_phy1 {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	dr_mode = "host";
+	status = "okay";
+};

diff --git a/src/arm64/rockchip/rk3588-coolpi-cm5.dtsi b/src/arm64/rockchip/rk3588-coolpi-cm5.dtsi
index 94ecb9b..fde8b22 100644
--- a/src/arm64/rockchip/rk3588-coolpi-cm5.dtsi
+++ b/src/arm64/rockchip/rk3588-coolpi-cm5.dtsi

@@ -136,6 +136,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-0 = <&i2c0m2_xfer>;
 	status = "okay";
@@ -357,7 +362,7 @@
 		vcca-supply = <&vcc5v0_sys>;
 
 		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl2";
+			pins = "gpio_pwrctrl1";
 			function = "pin_fun0";
 		};
 

diff --git a/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi b/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi
index c0d4a15..709d348 100644
--- a/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi
+++ b/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi

@@ -162,6 +162,8 @@
 		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
 
+		system-power-controller;
+
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;
 		vcc3-supply = <&vcc5v0_sys>;
@@ -182,7 +184,7 @@
 		#gpio-cells = <2>;
 
 		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl2";
+			pins = "gpio_pwrctrl1";
 			function = "pin_fun0";
 		};
 

diff --git a/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dtsi b/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dtsi
index 963e880..7b13178 100644
--- a/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dtsi
+++ b/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dtsi

@@ -68,6 +68,10 @@
 	status = "okay";
 };
 
+&combphy2_psu {
+	status = "okay";
+};
+
 &i2c6 {
 	status = "okay";
 
@@ -230,3 +234,7 @@
 &usb_host1_ohci {
 	status = "okay";
 };
+
+&usb_host2_xhci {
+	status = "okay";
+};

diff --git a/src/arm64/rockchip/rk3588-evb1-v10.dts b/src/arm64/rockchip/rk3588-evb1-v10.dts
index de30c26..7be2190 100644
--- a/src/arm64/rockchip/rk3588-evb1-v10.dts
+++ b/src/arm64/rockchip/rk3588-evb1-v10.dts

@@ -9,6 +9,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/usb/pd.h>
 #include "rk3588.dtsi"
 
 / {
@@ -159,6 +160,18 @@
 		vin-supply = <&avcc_1v8_s0>;
 	};
 
+	vbus5v0_typec: vbus5v0-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&typec5v_pwren>;
+		regulator-name = "vbus5v0_typec";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
 	vcc12v_dcin: vcc12v-dcin-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc12v_dcin";
@@ -281,9 +294,68 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	sram-supply = <&vdd_gpu_mem_s0>;
+	status = "okay";
+};
+
 &i2c2 {
 	status = "okay";
 
+	usbc0: usb-typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbc0_int>;
+		vbus-supply = <&vbus5v0_typec>;
+		status = "okay";
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			op-sink-microwatt = <1000000>;
+			power-role = "dual";
+			sink-pdos =
+				<PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
+			source-pdos =
+				<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "source";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usbc0_orien_sw: endpoint {
+						remote-endpoint = <&usbdp_phy0_orientation_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usbc0_role_sw: endpoint {
+						remote-endpoint = <&dwc3_0_role_switch>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					dp_altmode_mux: endpoint {
+						remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
+					};
+				};
+			};
+		};
+	};
+
 	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
@@ -410,6 +482,16 @@
 			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	usb-typec {
+		typec5v_pwren: typec5v-pwren {
+			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbc0_int: usbc0-int {
+			rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
 };
 
 &pwm2 {
@@ -484,12 +566,16 @@
 
 		regulators {
 			vdd_gpu_s0: dcdc-reg1 {
+				/* regulator coupling requires always-on */
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <550000>;
 				regulator-max-microvolt = <950000>;
 				regulator-ramp-delay = <12500>;
 				regulator-name = "vdd_gpu_s0";
 				regulator-enable-ramp-delay = <400>;
+				regulator-coupled-with = <&vdd_gpu_mem_s0>;
+				regulator-coupled-max-spread = <10000>;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
@@ -534,12 +620,16 @@
 			};
 
 			vdd_gpu_mem_s0: dcdc-reg5 {
+				/* regulator coupling requires always-on */
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <675000>;
 				regulator-max-microvolt = <950000>;
 				regulator-ramp-delay = <12500>;
 				regulator-enable-ramp-delay = <400>;
 				regulator-name = "vdd_gpu_mem_s0";
+				regulator-coupled-with = <&vdd_gpu_s0>;
+				regulator-coupled-max-spread = <10000>;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
@@ -1041,6 +1131,22 @@
 	status = "okay";
 };
 
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
 &u2phy2 {
 	status = "okay";
 };
@@ -1079,3 +1185,58 @@
 &usb_host1_ohci {
 	status = "okay";
 };
+
+&usbdp_phy0 {
+	mode-switch;
+	orientation-switch;
+	sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+	sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbdp_phy0_orientation_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_orien_sw>;
+		};
+
+		usbdp_phy0_dp_altmode_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&dp_altmode_mux>;
+		};
+	};
+};
+
+&usbdp_phy1 {
+	/*
+	 * USBDP PHY1 is wired to a female USB3 Type-A connector. Additionally
+	 * the differential pairs 2+3 and the aux channel are wired to a RTD2166,
+	 * which converts the DP signal into VGA. This is exposed on the
+	 * board via a female VGA connector.
+	 */
+	rockchip,dp-lane-mux = <2 3>;
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dwc3_0_role_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_role_sw>;
+		};
+	};
+};
+
+&usb_host1_xhci {
+	dr_mode = "host";
+	status = "okay";
+};

diff --git a/src/arm64/rockchip/rk3588-fet3588-c.dtsi b/src/arm64/rockchip/rk3588-fet3588-c.dtsi
new file mode 100644
index 0000000..47e64d5
--- /dev/null
+++ b/src/arm64/rockchip/rk3588-fet3588-c.dtsi

@@ -0,0 +1,558 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3588.dtsi"
+
+/ {
+	compatible = "forlinx,fet3588-c", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_rgb_b>;
+
+		io-led {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	pcie20_avdd0v85: pcie20-avdd0v85-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie20_avdd0v85";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <850000>;
+		vin-supply = <&vdd_0v85_s0>;
+	};
+
+	pcie20_avdd1v8: pcie20-avdd1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie20_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+
+	pcie30_avdd0v75: pcie30-avdd0v75-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v75";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <750000>;
+		regulator-max-microvolt = <750000>;
+		vin-supply = <&avdd_0v75_s0>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc4v0_sys: vcc4v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc4v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <4000000>;
+		regulator-max-microvolt = <4000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+	mem-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+	mem-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+	mem-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+	mem-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+	mem-supply = <&vdd_cpu_lit_mem_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+	mem-supply = <&vdd_cpu_lit_mem_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+	mem-supply = <&vdd_cpu_lit_mem_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+	mem-supply = <&vdd_cpu_lit_mem_s0>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc4v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc4v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1m2_xfer>;
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc4v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&pinctrl {
+	leds {
+		led_rgb_b: led-rgb-b {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	num-cs = <1>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		spi-max-frequency = <1000000>;
+		reg = <0x0>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_2v0_pldo_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "avdd_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};

diff --git a/src/arm64/rockchip/rk3588-jaguar.dts b/src/arm64/rockchip/rk3588-jaguar.dts
index 39d6500..31d2f89 100644
--- a/src/arm64/rockchip/rk3588-jaguar.dts
+++ b/src/arm64/rockchip/rk3588-jaguar.dts

@@ -72,6 +72,27 @@
 		};
 	};
 
+	/*
+	 * 100MHz reference clock for PCIe peripherals from PI6C557-05BLE
+	 * clock generator.
+	 * The clock output is gated via the OE pin on the clock generator.
+	 * This is modeled as a fixed-clock plus a gpio-gate-clock.
+	 */
+	pcie_refclk_gen: pcie-refclk-gen-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pcie_refclk: pcie-refclk-clock {
+		compatible = "gpio-gate-clock";
+		clocks = <&pcie_refclk_gen>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>; /* PCIE30X4_CLKREQN_M0 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie30x4_clkreqn_m0>;
+	};
+
 	pps {
 		compatible = "pps-gpio";
 		gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
@@ -245,6 +266,11 @@
 	};
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-0 = <&i2c0m2_xfer>;
 	status = "okay";
@@ -353,6 +379,30 @@
 	status = "okay";
 };
 
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x4 {
+	/*
+	 * The board has a gpio-controlled "pcie_refclk" generator,
+	 * so add it to the list of clocks.
+	 */
+	clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
+		 <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
+		 <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>,
+		 <&pcie_refclk>;
+	clock-names = "aclk_mst", "aclk_slv",
+		      "aclk_dbi", "pclk",
+		      "aux", "pipe",
+		      "ref";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie30x4_waken_m0 &pcie30x4_perstn_m0>;
+	reset-gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_HIGH>; /* PCIE30X4_PERSTN_M0 */
+	vpcie3v3-supply = <&vcc3v3_mdot2>;
+	status = "okay";
+};
+
 &pinctrl {
 	emmc {
 		emmc_reset: emmc-reset {
@@ -371,6 +421,20 @@
 			rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	pcie30x4 {
+		pcie30x4_clkreqn_m0: pcie30x4-clkreqn-m0 {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie30x4_perstn_m0: pcie30x4-perstn-m0 {
+			rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie30x4_waken_m0: pcie30x4-waken-m0 {
+			rockchip,pins = <0 RK_PC7 12 &pcfg_pull_none>;
+		};
+	};
 };
 
 &saradc {
@@ -452,7 +516,7 @@
 		vcca-supply = <&vcc5v0_sys>;
 
 		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl2";
+			pins = "gpio_pwrctrl1";
 			function = "pin_fun0";
 		};
 

diff --git a/src/arm64/rockchip/rk3588-ok3588-c.dts b/src/arm64/rockchip/rk3588-ok3588-c.dts
new file mode 100644
index 0000000..009566d
--- /dev/null
+++ b/src/arm64/rockchip/rk3588-ok3588-c.dts

@@ -0,0 +1,409 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include "rk3588-fet3588-c.dtsi"
+
+/ {
+	model = "Forlinx OK3588-C Board";
+	compatible = "forlinx,ok3588-c", "forlinx,fet3588-c", "rockchip,rk3588";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		mmc1 = &sdmmc;
+	};
+
+	adc-keys-0 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-maskrom {
+			label = "Maskrom";
+			linux,code = <KEY_SETUP>;
+			press-threshold-microvolt = <400>;
+		};
+	};
+
+	adc-keys-1 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-volume-up {
+			label = "V+/Recovery";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <17000>;
+		};
+
+		button-volume-down {
+			label = "V-";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <417000>;
+		};
+
+		button-menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <890000>;
+		};
+
+		button-escape {
+			label = "ESC";
+			linux,code = <KEY_ESC>;
+			press-threshold-microvolt = <1235000>;
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 95 145 195 255>;
+		fan-supply = <&vcc12v_dcin>;
+		pwms = <&pwm2 0 50000 0>;
+		#cooling-cells = <2>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_detect>;
+		simple-audio-card,name = "RK3588 OK3588-C Audio";
+		simple-audio-card,bitclock-master = <&masterdai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&masterdai>;
+		simple-audio-card,hp-det-gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,pin-switches = "Headphones", "Speaker";
+		simple-audio-card,widgets =
+			"Headphones", "Headphones",
+			"Speaker", "Speaker",
+			"Microphone", "Internal Microphone",
+			"Microphone", "Headset Microphone";
+		simple-audio-card,routing =
+			"Headphones", "LHP",
+			"Headphones", "RHP",
+			"Speaker", "LSPK",
+			"Speaker", "RSPK",
+			"LMICP", "Headset Microphone",
+			"RMICP", "Internal Microphone";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0_8ch>;
+		};
+
+		masterdai: simple-audio-card,codec {
+			sound-dai = <&nau8822>;
+		};
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc1v8_sys: vcc1v8-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie2x1l0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie2x1l2: vcc3v3-pcie2x1l2-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie2x1l2";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie30: vcc3v3_pcie30-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie30";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii-rxid";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	tx_delay = <0x44>;
+	rx_delay = <0x00>;
+	status = "okay";
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-rxid";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1_miim
+		     &gmac1_tx_bus2
+		     &gmac1_rx_bus2
+		     &gmac1_rgmii_clk
+		     &gmac1_rgmii_bus>;
+	tx_delay = <0x44>;
+	rx_delay = <0x00>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	tca6424a: gpio@23 {
+		compatible = "ti,tca6424";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tca6424a_int>;
+		vcc-supply = <&vcc3v3_sys>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5m2_xfer>;
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	nau8822: audio-codec@1a {
+		compatible = "nuvoton,nau8822";
+		reg = <0x1a>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@1 {
+		/* RTL8211F */
+		compatible = "ethernet-phy-id001c.c916",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtl8211f_0_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@2 {
+		/* RTL8211F */
+		compatible = "ethernet-phy-id001c.c916",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <0x2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtl8211f_1_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie2x1l0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_0_rst>;
+	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
+	status = "okay";
+};
+
+&pcie2x1l2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_2_rst>;
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie2x1l2>;
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3_rst>;
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie30>;
+	status = "okay";
+};
+
+&pinctrl {
+	pcie2 {
+		pcie2_0_rst: pcie2-0-rst {
+			rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie2_2_rst: pcie2-2-rst {
+			rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie3 {
+		pcie3_rst: pcie3-rst {
+			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rtl8211f {
+		rtl8211f_0_rst: rtl8211f-0-rst {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		rtl8211f_1_rst: rtl8211f-1-rst {
+			rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sound {
+		hp_detect: hp-detect {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	tca6424a {
+		tca6424a_int: tca6424a-int {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&avcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};

diff --git a/src/arm64/rockchip/rk3588-orangepi-5-plus.dts b/src/arm64/rockchip/rk3588-orangepi-5-plus.dts
index 1a60442..e748714 100644
--- a/src/arm64/rockchip/rk3588-orangepi-5-plus.dts
+++ b/src/arm64/rockchip/rk3588-orangepi-5-plus.dts

@@ -444,6 +444,7 @@
 &sdmmc {
 	bus-width = <4>;
 	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	max-frequency = <150000000>;
 	no-sdio;

diff --git a/src/arm64/rockchip/rk3588-quartzpro64.dts b/src/arm64/rockchip/rk3588-quartzpro64.dts
index 22bbfbe..e80caa3 100644
--- a/src/arm64/rockchip/rk3588-quartzpro64.dts
+++ b/src/arm64/rockchip/rk3588-quartzpro64.dts

@@ -13,7 +13,7 @@
 #include "rk3588.dtsi"
 
 / {
-	model = "PINE64 QuartzPro64";
+	model = "Pine64 QuartzPro64";
 	compatible = "pine64,quartzpro64", "rockchip,rk3588";
 
 	aliases {
@@ -285,6 +285,12 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	sram-supply = <&vdd_gpu_mem_s0>;
+	status = "okay";
+};
+
 &i2c2 {
 	status = "okay";
 
@@ -429,6 +435,7 @@
 &sdmmc {
 	bus-width = <4>;
 	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	max-frequency = <150000000>;
 	no-sdio;
@@ -492,11 +499,15 @@
 		regulators {
 			vdd_gpu_s0: dcdc-reg1 {
 				regulator-name = "vdd_gpu_s0";
+				/* regulator coupling requires always-on */
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-enable-ramp-delay = <400>;
 				regulator-min-microvolt = <550000>;
 				regulator-max-microvolt = <950000>;
 				regulator-ramp-delay = <12500>;
+				regulator-coupled-with = <&vdd_gpu_mem_s0>;
+				regulator-coupled-max-spread = <10000>;
 
 				regulator-state-mem {
 					regulator-off-in-suspend;
@@ -546,11 +557,15 @@
 
 			vdd_gpu_mem_s0: dcdc-reg5 {
 				regulator-name = "vdd_gpu_mem_s0";
+				/* regulator coupling requires always-on */
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-enable-ramp-delay = <400>;
 				regulator-min-microvolt = <675000>;
 				regulator-max-microvolt = <950000>;
 				regulator-ramp-delay = <12500>;
+				regulator-coupled-with = <&vdd_gpu_s0>;
+				regulator-coupled-max-spread = <10000>;
 
 				regulator-state-mem {
 					regulator-off-in-suspend;

diff --git a/src/arm64/rockchip/rk3588-rock-5b.dts b/src/arm64/rockchip/rk3588-rock-5b.dts
index 1fe8b2a..2e75126 100644
--- a/src/arm64/rockchip/rk3588-rock-5b.dts
+++ b/src/arm64/rockchip/rk3588-rock-5b.dts

@@ -7,7 +7,7 @@
 #include "rk3588.dtsi"
 
 / {
-	model = "Radxa ROCK 5 Model B";
+	model = "Radxa ROCK 5B";
 	compatible = "radxa,rock-5b", "rockchip,rk3588";
 
 	aliases {
@@ -180,6 +180,11 @@
 	cpu-supply = <&vdd_cpu_lit_s0>;
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0m2_xfer>;
@@ -378,6 +383,7 @@
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	sd-uhs-sdr104;
 	vmmc-supply = <&vcc_3v3_s3>;
@@ -742,6 +748,14 @@
 	status = "okay";
 };
 
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
 &u2phy2 {
 	status = "okay";
 };
@@ -761,6 +775,10 @@
 	status = "okay";
 };
 
+&usbdp_phy1 {
+	status = "okay";
+};
+
 &usb_host0_ehci {
 	status = "okay";
 };
@@ -777,6 +795,11 @@
 	status = "okay";
 };
 
+&usb_host1_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usb_host2_xhci {
 	status = "okay";
 };

diff --git a/src/arm64/rockchip/rk3588-tiger-haikou.dts b/src/arm64/rockchip/rk3588-tiger-haikou.dts
index d672198..e4b7a0a 100644
--- a/src/arm64/rockchip/rk3588-tiger-haikou.dts
+++ b/src/arm64/rockchip/rk3588-tiger-haikou.dts

@@ -113,6 +113,16 @@
 		vin-supply = <&dc_12v>;
 	};
 
+	vcc5v0_otg: vcc5v0-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc5v0_otg";
+		regulator-always-on;
+	};
+
 	vcc5v0_usb: vcc5v0-usb-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_usb";
@@ -137,6 +147,10 @@
 	status = "okay";
 };
 
+&extcon_usb3 {
+	status = "okay";
+};
+
 &gmac0 {
 	status = "okay";
 };
@@ -199,6 +213,13 @@
 				<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
+
+	usb2 {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins =
+			  <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &sdmmc {
@@ -214,6 +235,23 @@
 	status = "okay";
 };
 
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	phy-supply = <&vcc5v0_otg>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
 &u2phy2 {
 	status = "okay";
 };
@@ -231,25 +269,38 @@
 };
 
 &uart2 {
-	pinctrl-0 = <&uart2m2_xfer>;
 	status = "okay";
 };
 
 &uart5 {
 	rts-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
+};
+
+&usbdp_phy0 {
 	status = "okay";
 };
 
-/* host0 on Q7_USB_P2, lower usb3 port */
+&usbdp_phy1 {
+	status = "okay";
+};
+
+/* host0 on Q7_USB_P2, upper usb3 port */
 &usb_host0_ehci {
 	status = "okay";
 };
 
-/* host0 on Q7_USB_P2, lower usb3 port */
+/* host0 on Q7_USB_P2, upper usb3 port */
 &usb_host0_ohci {
 	status = "okay";
 };
 
+/* host0_xhci on Q7_USB_P1, usb3-otg port */
+&usb_host0_xhci {
+	dr_mode = "otg";
+	extcon = <&extcon_usb3>;
+	status = "okay";
+};
+
 /* host1 on Q7_USB_P3, usb2 port */
 &usb_host1_ehci {
 	status = "okay";
@@ -260,7 +311,13 @@
 	status = "okay";
 };
 
+/* host1_xhci on Q7_USB_P0, lower usb3 port */
+&usb_host1_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
-/* host2 on Q7_USB_P2, lower usb3 port */
+/* host2 on Q7_USB_P2, upper usb3 port */
 &usb_host2_xhci {
 	status = "okay";
 };

diff --git a/src/arm64/rockchip/rk3588-tiger.dtsi b/src/arm64/rockchip/rk3588-tiger.dtsi
index 1eb2543..615094b 100644
--- a/src/arm64/rockchip/rk3588-tiger.dtsi
+++ b/src/arm64/rockchip/rk3588-tiger.dtsi

@@ -23,6 +23,14 @@
 		reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
 	};
 
+	extcon_usb3: extcon-usb3 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_id>;
+		status = "disabled";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -46,7 +54,7 @@
 	pcie_refclk_gen: pcie-refclk-gen-clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <1000000000>;
+		clock-frequency = <100000000>;
 	};
 
 	pcie_refclk: pcie-refclk-clock {
@@ -139,6 +147,11 @@
 	snps,reset-delays-us = <0 10000 100000>;
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
 &i2c1 {
 	pinctrl-0 = <&i2c1m0_xfer>;
 };
@@ -322,6 +335,18 @@
 			rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	usb3 {
+		usb3_id: usb3-id {
+			rockchip,pins =
+			  <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0m1_pins>;
+	pinctrl-names = "default";
 };
 
 &saradc {
@@ -396,7 +421,7 @@
 		vcca-supply = <&vcc5v0_sys>;
 
 		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl2";
+			pins = "gpio_pwrctrl1";
 			function = "pin_fun0";
 		};
 
@@ -683,6 +708,11 @@
 	status = "okay";
 };
 
+/* Routed to UART0 on the Q7 connector */
+&uart2 {
+	pinctrl-0 = <&uart2m2_xfer>;
+};
+
 /* Mule-ATtiny UPDI */
 &uart4 {
 	pinctrl-0 = <&uart4m2_xfer>;

diff --git a/src/arm64/rockchip/rk3588-turing-rk1.dtsi b/src/arm64/rockchip/rk3588-turing-rk1.dtsi
index dc08da5..6b9206c 100644
--- a/src/arm64/rockchip/rk3588-turing-rk1.dtsi
+++ b/src/arm64/rockchip/rk3588-turing-rk1.dtsi

@@ -318,7 +318,7 @@
 		#gpio-cells = <2>;
 
 		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl2";
+			pins = "gpio_pwrctrl1";
 			function = "pin_fun0";
 		};
 

diff --git a/src/arm64/rockchip/rk3588.dtsi b/src/arm64/rockchip/rk3588.dtsi
index 5519c14..5984016 100644
--- a/src/arm64/rockchip/rk3588.dtsi
+++ b/src/arm64/rockchip/rk3588.dtsi

@@ -7,6 +7,26 @@
 #include "rk3588-pinctrl.dtsi"
 
 / {
+	usb_host1_xhci: usb@fc400000 {
+		compatible = "rockchip,rk3588-dwc3", "snps,dwc3";
+		reg = <0x0 0xfc400000 0x0 0x400000>;
+		interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru REF_CLK_USB3OTG1>, <&cru SUSPEND_CLK_USB3OTG1>,
+			 <&cru ACLK_USB3OTG1>;
+		clock-names = "ref_clk", "suspend_clk", "bus_clk";
+		dr_mode = "otg";
+		phys = <&u2phy1_otg>, <&usbdp_phy1 PHY_TYPE_USB3>;
+		phy-names = "usb2-phy", "usb3-phy";
+		phy_type = "utmi_wide";
+		power-domains = <&power RK3588_PD_USB>;
+		resets = <&cru SRST_A_USB3OTG1>;
+		snps,dis_enblslpm_quirk;
+		snps,dis-u2-freeclk-exists-quirk;
+		snps,dis-del-phy-power-chg-quirk;
+		snps,dis-tx-ipgap-linecheck-quirk;
+		status = "disabled";
+	};
+
 	pcie30_phy_grf: syscon@fd5b8000 {
 		compatible = "rockchip,rk3588-pcie3-phy-grf", "syscon";
 		reg = <0x0 0xfd5b8000 0x0 0x10000>;
@@ -17,6 +37,36 @@
 		reg = <0x0 0xfd5c0000 0x0 0x100>;
 	};
 
+	usbdpphy1_grf: syscon@fd5cc000 {
+		compatible = "rockchip,rk3588-usbdpphy-grf", "syscon";
+		reg = <0x0 0xfd5cc000 0x0 0x4000>;
+	};
+
+	usb2phy1_grf: syscon@fd5d4000 {
+		compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xfd5d4000 0x0 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		u2phy1: usb2phy@4000 {
+			compatible = "rockchip,rk3588-usb2phy";
+			reg = <0x4000 0x10>;
+			#clock-cells = <0>;
+			clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
+			clock-names = "phyclk";
+			clock-output-names = "usb480m_phy1";
+			interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH 0>;
+			resets = <&cru SRST_OTGPHY_U3_1>, <&cru SRST_P_USB2PHY_U3_1_GRF0>;
+			reset-names = "phy", "apb";
+			status = "disabled";
+
+			u2phy1_otg: otg-port {
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
 	i2s8_8ch: i2s@fddc8000 {
 		compatible = "rockchip,rk3588-i2s-tdm";
 		reg = <0x0 0xfddc8000 0x0 0x1000>;
@@ -310,6 +360,28 @@
 		};
 	};
 
+	usbdp_phy1: phy@fed90000 {
+		compatible = "rockchip,rk3588-usbdp-phy";
+		reg = <0x0 0xfed90000 0x0 0x10000>;
+		#phy-cells = <1>;
+		clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>,
+			 <&cru CLK_USBDP_PHY1_IMMORTAL>,
+			 <&cru PCLK_USBDPPHY1>,
+			 <&u2phy1>;
+		clock-names = "refclk", "immortal", "pclk", "utmi";
+		resets = <&cru SRST_USBDP_COMBO_PHY1_INIT>,
+			 <&cru SRST_USBDP_COMBO_PHY1_CMN>,
+			 <&cru SRST_USBDP_COMBO_PHY1_LANE>,
+			 <&cru SRST_USBDP_COMBO_PHY1_PCS>,
+			 <&cru SRST_P_USBDPPHY1>;
+		reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
+		rockchip,u2phy-grf = <&usb2phy1_grf>;
+		rockchip,usb-grf = <&usb_grf>;
+		rockchip,usbdpphy-grf = <&usbdpphy1_grf>;
+		rockchip,vo-grf = <&vo0_grf>;
+		status = "disabled";
+	};
+
 	combphy1_ps: phy@fee10000 {
 		compatible = "rockchip,rk3588-naneng-combphy";
 		reg = <0x0 0xfee10000 0x0 0x100>;

diff --git a/src/arm64/rockchip/rk3588s-coolpi-4b.dts b/src/arm64/rockchip/rk3588s-coolpi-4b.dts
index e037bf9..074c316 100644
--- a/src/arm64/rockchip/rk3588s-coolpi-4b.dts
+++ b/src/arm64/rockchip/rk3588s-coolpi-4b.dts

@@ -203,6 +203,11 @@
 	cpu-supply = <&vdd_cpu_big1_s0>;
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-0 = <&i2c0m2_xfer>;
 	status = "okay";
@@ -283,9 +288,9 @@
 	pinctrl-0 = <&i2c7m0_xfer>;
 	status = "okay";
 
-	es8316: audio-codec@11 {
+	es8316: audio-codec@10 {
 		compatible = "everest,es8316";
-		reg = <0x11>;
+		reg = <0x10>;
 		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
 		assigned-clock-rates = <12288000>;
 		clocks = <&cru I2S0_8CH_MCLKOUT>;
@@ -479,7 +484,7 @@
 		vcca-supply = <&vcc5v0_sys>;
 
 		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl2";
+			pins = "gpio_pwrctrl1";
 			function = "pin_fun0";
 		};
 

diff --git a/src/arm64/rockchip/rk3588s-indiedroid-nova.dts b/src/arm64/rockchip/rk3588s-indiedroid-nova.dts
index ce8119c..d8c50fd 100644
--- a/src/arm64/rockchip/rk3588s-indiedroid-nova.dts
+++ b/src/arm64/rockchip/rk3588s-indiedroid-nova.dts

@@ -316,7 +316,7 @@
 		pinctrl-names = "default";
 		vbus-supply = <&vbus5v0_typec>;
 
-		connector {
+		usb_con: connector {
 			compatible = "usb-c-connector";
 			data-role = "dual";
 			label = "USB-C";
@@ -325,6 +325,32 @@
 			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
 			sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
 			op-sink-microwatt = <1000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					usbc0_orien_sw: endpoint {
+						remote-endpoint = <&usbdp_phy0_orientation_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					usbc0_role_sw: endpoint {
+						remote-endpoint = <&dwc3_0_role_switch>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					dp_altmode_mux: endpoint {
+						remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
+					};
+				};
+			};
 		};
 	};
 
@@ -528,7 +554,7 @@
 		vcca-supply = <&vcc5v0_sys>;
 
 		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl2";
+			pins = "gpio_pwrctrl1";
 			function = "pin_fun0";
 		};
 
@@ -788,6 +814,14 @@
 	status = "okay";
 };
 
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
 &u2phy2 {
 	status = "okay";
 };
@@ -839,6 +873,17 @@
 	status = "okay";
 };
 
+&usb_host0_xhci {
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		dwc3_0_role_switch: endpoint {
+			remote-endpoint = <&usbc0_role_sw>;
+		};
+	};
+};
+
 &usb_host1_ehci {
 	status = "okay";
 };
@@ -850,3 +895,27 @@
 &usb_host2_xhci {
 	status = "okay";
 };
+
+&usbdp_phy0 {
+	orientation-switch;
+	mode-switch;
+	sbu1-dc-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
+	sbu2-dc-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
+	rockchip,dp-lane-mux = <2 3>;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbdp_phy0_orientation_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_orien_sw>;
+		};
+
+		usbdp_phy0_dp_altmode_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&dp_altmode_mux>;
+		};
+	};
+};

diff --git a/src/arm64/rockchip/rk3588s-khadas-edge2.dts b/src/arm64/rockchip/rk3588s-khadas-edge2.dts
index f53e993..dbddfc3 100644
--- a/src/arm64/rockchip/rk3588s-khadas-edge2.dts
+++ b/src/arm64/rockchip/rk3588s-khadas-edge2.dts

@@ -3,7 +3,9 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/leds/common.h>
 #include "rk3588s.dtsi"
 
 / {
@@ -12,13 +14,300 @@
 
 	aliases {
 		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
 	};
 
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <17000>;
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_receiver_pin>;
+	};
+
+	leds {
+		compatible = "pwm-leds";
+
+		red_led: led-0 {
+			label = "red_led";
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			linux,default-trigger = "none";
+			max-brightness = <255>;
+			pwms = <&pwm11 0 25000 0>;
+		};
+
+		green_led: led-1 {
+			label = "green_led";
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_POWER;
+			linux,default-trigger = "default-on";
+			max-brightness = <255>;
+			pwms = <&pwm14 0 25000 0>;
+		};
+
+		blue_led: led-2 {
+			label = "blue_led";
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			linux,default-trigger = "none";
+			max-brightness = <255>;
+			pwms = <&pwm15 0 25000 0>;
+		};
+	};
+
+	vcc3v3_pcie_wl: vcc3v3-pcie-wl-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie2_2_vcc3v3_en>;
+		regulator-name = "vcc3v3_pcie_wl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_3v3_sd: vdd-3v3-sd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sd";
+		gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_s3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_en>;
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
 };
 
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		wakeup-source;
+	};
+};
+
+&pinctrl {
+	vdd_sd {
+		vdd_sd_en: vdd-sd-en {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pcie2 {
+		pcie2_2_rst: pcie2-2-rst {
+			rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie2_2_vcc3v3_en: pcie2-2-vcc-en {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ir-receiver {
+		ir_receiver_pin: ir-receiver-pin {
+			rockchip,pins = <1  RK_PA7  RK_FUNC_GPIO  &pcfg_pull_none>;
+		};
+	};
+
+	wireless-bluetooth {
+		bt_reset_pin: bt-reset-pin {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_pin: bt-wake-pin {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		bt_wake_host_irq: bt-wake-host-irq {
+			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&pcie2x1l2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_2_rst>;
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie_wl>;
+	status = "okay";
+};
+
+&pwm11 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm11m1_pins>;
+	status = "okay";
+};
+
+&pwm14 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm14m1_pins>;
+	status = "okay";
+};
+
+&pwm15 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm15m1_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&avcc_1v8_s0>;
+	status = "okay";
+};
+
 &sdhci {
 	bus-width = <8>;
 	no-sdio;
@@ -27,9 +316,405 @@
 	mmc-hs400-1_8v;
 	mmc-hs400-enhanced-strobe;
 	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	no-mmc;
+	no-sdio;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vdd_3v3_sd>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fspim2_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <100000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
 };
 
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_log_s0";
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-name = "vdd_vdenc_s0";
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd_ddr_s0";
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "avdd_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
 &uart2 {
 	pinctrl-0 = <&uart2m0_xfer>;
 	status = "okay";
 };
+
+&uart9 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>;
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host2_xhci {
+	status = "okay";
+};

diff --git a/src/arm64/rockchip/rk3588s-orangepi-5.dts b/src/arm64/rockchip/rk3588s-orangepi-5.dts
index 25de436..feea6b2 100644
--- a/src/arm64/rockchip/rk3588s-orangepi-5.dts
+++ b/src/arm64/rockchip/rk3588s-orangepi-5.dts

@@ -6,6 +6,7 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/usb/pd.h>
 #include "rk3588s.dtsi"
 
 / {
@@ -146,6 +147,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0m2_xfer>;
@@ -212,6 +218,56 @@
 	pinctrl-0 = <&i2c6m3_xfer>;
 	status = "okay";
 
+	usbc0: usb-typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbc0_int>;
+		vbus-supply = <&vbus_typec>;
+		status = "okay";
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			op-sink-microwatt = <1000000>;
+			power-role = "dual";
+			sink-pdos =
+				<PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
+			source-pdos =
+				<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "source";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					usbc0_hs: endpoint {
+						remote-endpoint = <&usb_host0_xhci_drd_sw>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					usbc0_ss: endpoint {
+						remote-endpoint = <&usbdp_phy0_typec_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					usbc0_sbu: endpoint {
+						remote-endpoint = <&usbdp_phy0_typec_sbu>;
+					};
+				};
+			};
+		};
+	};
+
 	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
@@ -336,7 +392,7 @@
 		#gpio-cells = <2>;
 
 		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl2";
+			pins = "gpio_pwrctrl1";
 			function = "pin_fun0";
 		};
 
@@ -625,6 +681,14 @@
 	status = "okay";
 };
 
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
 &u2phy2 {
 	status = "okay";
 };
@@ -646,6 +710,29 @@
 	status = "okay";
 };
 
+&usbdp_phy0 {
+	mode-switch;
+	orientation-switch;
+	sbu1-dc-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+	sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbdp_phy0_typec_ss: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_ss>;
+		};
+
+		usbdp_phy0_typec_sbu: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&usbc0_sbu>;
+		};
+	};
+};
+
 &usb_host0_ehci {
 	status = "okay";
 };
@@ -654,6 +741,18 @@
 	status = "okay";
 };
 
+&usb_host0_xhci {
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb_host0_xhci_drd_sw: endpoint {
+			remote-endpoint = <&usbc0_hs>;
+		};
+	};
+};
+
 &usb_host1_ehci {
 	status = "okay";
 };

diff --git a/src/arm64/rockchip/rk3588s-rock-5a.dts b/src/arm64/rockchip/rk3588s-rock-5a.dts
index 00afb90..3b9a349 100644
--- a/src/arm64/rockchip/rk3588s-rock-5a.dts
+++ b/src/arm64/rockchip/rk3588s-rock-5a.dts

@@ -8,7 +8,7 @@
 #include "rk3588s.dtsi"
 
 / {
-	model = "Radxa ROCK 5 Model A";
+	model = "Radxa ROCK 5A";
 	compatible = "radxa,rock-5a", "rockchip,rk3588s";
 
 	aliases {
@@ -366,6 +366,7 @@
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	max-frequency = <150000000>;
 	no-sdio;
@@ -393,6 +394,7 @@
 		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
 		spi-max-frequency = <1000000>;
+		system-power-controller;
 
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;
@@ -414,7 +416,7 @@
 		#gpio-cells = <2>;
 
 		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl2";
+			pins = "gpio_pwrctrl1";
 			function = "pin_fun0";
 		};
 
@@ -697,6 +699,14 @@
 	};
 };
 
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
 &u2phy2 {
 	status = "okay";
 };
@@ -720,6 +730,11 @@
 	status = "okay";
 };
 
+&usbdp_phy0 {
+	status = "okay";
+	rockchip,dp-lane-mux = <2 3>;
+};
+
 &usb_host0_ehci {
 	status = "okay";
 	pinctrl-names = "default";
@@ -730,6 +745,11 @@
 	status = "okay";
 };
 
+&usb_host0_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usb_host1_ehci {
 	status = "okay";
 };

diff --git a/src/arm64/rockchip/rk3588s.dtsi b/src/arm64/rockchip/rk3588s.dtsi
index 87b83c8..6ac5ac8 100644
--- a/src/arm64/rockchip/rk3588s.dtsi
+++ b/src/arm64/rockchip/rk3588s.dtsi

@@ -347,6 +347,11 @@
 		};
 	};
 
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
 	firmware {
 		optee: optee {
 			compatible = "linaro,optee-tz";
@@ -394,11 +399,6 @@
 		#clock-cells = <0>;
 	};
 
-	display_subsystem: display-subsystem {
-		compatible = "rockchip,display-subsystem";
-		ports = <&vop_out>;
-	};
-
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
@@ -436,6 +436,84 @@
 		};
 	};
 
+	gpu: gpu@fb000000 {
+		compatible = "rockchip,rk3588-mali", "arm,mali-valhall-csf";
+		reg = <0x0 0xfb000000 0x0 0x200000>;
+		#cooling-cells = <2>;
+		assigned-clocks = <&scmi_clk SCMI_CLK_GPU>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru CLK_GPU>, <&cru CLK_GPU_COREGROUP>,
+			 <&cru CLK_GPU_STACKS>;
+		clock-names = "core", "coregroup", "stacks";
+		dynamic-power-coefficient = <2982>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "job", "mmu", "gpu";
+		operating-points-v2 = <&gpu_opp_table>;
+		power-domains = <&power RK3588_PD_GPU>;
+		status = "disabled";
+
+		gpu_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-300000000 {
+				opp-hz = /bits/ 64 <300000000>;
+				opp-microvolt = <675000 675000 850000>;
+			};
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+				opp-microvolt = <675000 675000 850000>;
+			};
+			opp-500000000 {
+				opp-hz = /bits/ 64 <500000000>;
+				opp-microvolt = <675000 675000 850000>;
+			};
+			opp-600000000 {
+				opp-hz = /bits/ 64 <600000000>;
+				opp-microvolt = <675000 675000 850000>;
+			};
+			opp-700000000 {
+				opp-hz = /bits/ 64 <700000000>;
+				opp-microvolt = <700000 700000 850000>;
+			};
+			opp-800000000 {
+				opp-hz = /bits/ 64 <800000000>;
+				opp-microvolt = <750000 750000 850000>;
+			};
+			opp-900000000 {
+				opp-hz = /bits/ 64 <900000000>;
+				opp-microvolt = <800000 800000 850000>;
+			};
+			opp-1000000000 {
+				opp-hz = /bits/ 64 <1000000000>;
+				opp-microvolt = <850000 850000 850000>;
+			};
+		};
+	};
+
+	usb_host0_xhci: usb@fc000000 {
+		compatible = "rockchip,rk3588-dwc3", "snps,dwc3";
+		reg = <0x0 0xfc000000 0x0 0x400000>;
+		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru REF_CLK_USB3OTG0>, <&cru SUSPEND_CLK_USB3OTG0>,
+			 <&cru ACLK_USB3OTG0>;
+		clock-names = "ref_clk", "suspend_clk", "bus_clk";
+		dr_mode = "otg";
+		phys = <&u2phy0_otg>, <&usbdp_phy0 PHY_TYPE_USB3>;
+		phy-names = "usb2-phy", "usb3-phy";
+		phy_type = "utmi_wide";
+		power-domains = <&power RK3588_PD_USB>;
+		resets = <&cru SRST_A_USB3OTG0>;
+		snps,dis_enblslpm_quirk;
+		snps,dis-u1-entry-quirk;
+		snps,dis-u2-entry-quirk;
+		snps,dis-u2-freeclk-exists-quirk;
+		snps,dis-del-phy-power-chg-quirk;
+		snps,dis-tx-ipgap-linecheck-quirk;
+		status = "disabled";
+	};
+
 	usb_host0_ehci: usb@fc800000 {
 		compatible = "rockchip,rk3588-ehci", "generic-ehci";
 		reg = <0x0 0xfc800000 0x0 0x40000>;
@@ -501,6 +579,30 @@
 		status = "disabled";
 	};
 
+	mmu600_pcie: iommu@fc900000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x0 0xfc900000 0x0 0x200000>;
+		interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	mmu600_php: iommu@fcb00000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x0 0xfcb00000 0x0 0x200000>;
+		interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
 	pmu1grf: syscon@fd58a000 {
 		compatible = "rockchip,rk3588-pmugrf", "syscon", "simple-mfd";
 		reg = <0x0 0xfd58a000 0x0 0x10000>;
@@ -516,12 +618,23 @@
 		reg = <0x0 0xfd5a4000 0x0 0x2000>;
 	};
 
+	vo0_grf: syscon@fd5a6000 {
+		compatible = "rockchip,rk3588-vo-grf", "syscon";
+		reg = <0x0 0xfd5a6000 0x0 0x2000>;
+		clocks = <&cru PCLK_VO0GRF>;
+	};
+
 	vo1_grf: syscon@fd5a8000 {
 		compatible = "rockchip,rk3588-vo-grf", "syscon";
 		reg = <0x0 0xfd5a8000 0x0 0x100>;
 		clocks = <&cru PCLK_VO1GRF>;
 	};
 
+	usb_grf: syscon@fd5ac000 {
+		compatible = "rockchip,rk3588-usb-grf", "syscon";
+		reg = <0x0 0xfd5ac000 0x0 0x4000>;
+	};
+
 	php_grf: syscon@fd5b0000 {
 		compatible = "rockchip,rk3588-php-grf", "syscon";
 		reg = <0x0 0xfd5b0000 0x0 0x1000>;
@@ -537,22 +650,52 @@
 		reg = <0x0 0xfd5c4000 0x0 0x100>;
 	};
 
+	usbdpphy0_grf: syscon@fd5c8000 {
+		compatible = "rockchip,rk3588-usbdpphy-grf", "syscon";
+		reg = <0x0 0xfd5c8000 0x0 0x4000>;
+	};
+
+	usb2phy0_grf: syscon@fd5d0000 {
+		compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xfd5d0000 0x0 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		u2phy0: usb2phy@0 {
+			compatible = "rockchip,rk3588-usb2phy";
+			reg = <0x0 0x10>;
+			#clock-cells = <0>;
+			clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
+			clock-names = "phyclk";
+			clock-output-names = "usb480m_phy0";
+			interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH 0>;
+			resets = <&cru SRST_OTGPHY_U3_0>, <&cru SRST_P_USB2PHY_U3_0_GRF0>;
+			reset-names = "phy", "apb";
+			status = "disabled";
+
+			u2phy0_otg: otg-port {
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
 	usb2phy2_grf: syscon@fd5d8000 {
 		compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
 		reg = <0x0 0xfd5d8000 0x0 0x4000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		u2phy2: usb2-phy@8000 {
+		u2phy2: usb2phy@8000 {
 			compatible = "rockchip,rk3588-usb2phy";
 			reg = <0x8000 0x10>;
-			interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>;
-			resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>;
-			reset-names = "phy", "apb";
+			#clock-cells = <0>;
 			clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
 			clock-names = "phyclk";
 			clock-output-names = "usb480m_phy2";
-			#clock-cells = <0>;
+			interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>;
+			resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>;
+			reset-names = "phy", "apb";
 			status = "disabled";
 
 			u2phy2_host: host-port {
@@ -568,16 +711,16 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		u2phy3: usb2-phy@c000 {
+		u2phy3: usb2phy@c000 {
 			compatible = "rockchip,rk3588-usb2phy";
 			reg = <0xc000 0x10>;
-			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>;
-			resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>;
-			reset-names = "phy", "apb";
+			#clock-cells = <0>;
 			clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
 			clock-names = "phyclk";
 			clock-output-names = "usb480m_phy3";
-			#clock-cells = <0>;
+			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>;
+			resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>;
+			reset-names = "phy", "apb";
 			status = "disabled";
 
 			u2phy3_host: host-port {
@@ -646,74 +789,6 @@
 		status = "disabled";
 	};
 
-	vop: vop@fdd90000 {
-		compatible = "rockchip,rk3588-vop";
-		reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>;
-		reg-names = "vop", "gamma-lut";
-		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru ACLK_VOP>,
-			 <&cru HCLK_VOP>,
-			 <&cru DCLK_VOP0>,
-			 <&cru DCLK_VOP1>,
-			 <&cru DCLK_VOP2>,
-			 <&cru DCLK_VOP3>,
-			 <&cru PCLK_VOP_ROOT>;
-		clock-names = "aclk",
-			      "hclk",
-			      "dclk_vp0",
-			      "dclk_vp1",
-			      "dclk_vp2",
-			      "dclk_vp3",
-			      "pclk_vop";
-		iommus = <&vop_mmu>;
-		power-domains = <&power RK3588_PD_VOP>;
-		rockchip,grf = <&sys_grf>;
-		rockchip,vop-grf = <&vop_grf>;
-		rockchip,vo1-grf = <&vo1_grf>;
-		rockchip,pmu = <&pmu>;
-		status = "disabled";
-
-		vop_out: ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			vp0: port@0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-			};
-
-			vp1: port@1 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <1>;
-			};
-
-			vp2: port@2 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <2>;
-			};
-
-			vp3: port@3 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <3>;
-			};
-		};
-	};
-
-	vop_mmu: iommu@fdd97e00 {
-		compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
-		reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>;
-		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
-		clock-names = "aclk", "iface";
-		#iommu-cells = <0>;
-		power-domains = <&power RK3588_PD_VOP>;
-		status = "disabled";
-	};
-
 	uart0: serial@fd890000 {
 		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
 		reg = <0x0 0xfd890000 0x0 0x100>;
@@ -1084,6 +1159,87 @@
 		};
 	};
 
+	av1d: video-codec@fdc70000 {
+		compatible = "rockchip,rk3588-av1-vpu";
+		reg = <0x0 0xfdc70000 0x0 0x800>;
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "vdpu";
+		assigned-clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>;
+		assigned-clock-rates = <400000000>, <400000000>;
+		clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>;
+		clock-names = "aclk", "hclk";
+		power-domains = <&power RK3588_PD_AV1>;
+		resets = <&cru SRST_A_AV1>, <&cru SRST_P_AV1>, <&cru SRST_A_AV1_BIU>, <&cru SRST_P_AV1_BIU>;
+	};
+
+	vop: vop@fdd90000 {
+		compatible = "rockchip,rk3588-vop";
+		reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>;
+		reg-names = "vop", "gamma-lut";
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VOP>,
+			 <&cru HCLK_VOP>,
+			 <&cru DCLK_VOP0>,
+			 <&cru DCLK_VOP1>,
+			 <&cru DCLK_VOP2>,
+			 <&cru DCLK_VOP3>,
+			 <&cru PCLK_VOP_ROOT>;
+		clock-names = "aclk",
+			      "hclk",
+			      "dclk_vp0",
+			      "dclk_vp1",
+			      "dclk_vp2",
+			      "dclk_vp3",
+			      "pclk_vop";
+		iommus = <&vop_mmu>;
+		power-domains = <&power RK3588_PD_VOP>;
+		rockchip,grf = <&sys_grf>;
+		rockchip,vop-grf = <&vop_grf>;
+		rockchip,vo1-grf = <&vo1_grf>;
+		rockchip,pmu = <&pmu>;
+		status = "disabled";
+
+		vop_out: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vp0: port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+			};
+
+			vp1: port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+			};
+
+			vp2: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+			};
+
+			vp3: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+			};
+		};
+	};
+
+	vop_mmu: iommu@fdd97e00 {
+		compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+		reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3588_PD_VOP>;
+		status = "disabled";
+	};
+
 	i2s4_8ch: i2s@fddc0000 {
 		compatible = "rockchip,rk3588-i2s-tdm";
 		reg = <0x0 0xfddc0000 0x0 0x1000>;
@@ -1375,6 +1531,16 @@
 		reg = <0x0 0xfdf82200 0x0 0x20>;
 	};
 
+	dfi: dfi@fe060000 {
+		reg = <0x00 0xfe060000 0x00 0x10000>;
+		compatible = "rockchip,rk3588-dfi";
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
+		rockchip,pmu = <&pmu1grf>;
+	};
+
 	pcie2x1l1: pcie@fe180000 {
 		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
 		bus-range = <0x30 0x3f>;
@@ -1477,16 +1643,6 @@
 		};
 	};
 
-	dfi: dfi@fe060000 {
-		reg = <0x00 0xfe060000 0x00 0x10000>;
-		compatible = "rockchip,rk3588-dfi";
-		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
-		rockchip,pmu = <&pmu1grf>;
-	};
-
 	gmac1: ethernet@fe1c0000 {
 		compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
 		reg = <0x0 0xfe1c0000 0x0 0x10000>;
@@ -2380,6 +2536,28 @@
 		status = "disabled";
 	};
 
+	usbdp_phy0: phy@fed80000 {
+		compatible = "rockchip,rk3588-usbdp-phy";
+		reg = <0x0 0xfed80000 0x0 0x10000>;
+		#phy-cells = <1>;
+		clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>,
+			 <&cru CLK_USBDP_PHY0_IMMORTAL>,
+			 <&cru PCLK_USBDPPHY0>,
+			 <&u2phy0>;
+		clock-names = "refclk", "immortal", "pclk", "utmi";
+		resets = <&cru SRST_USBDP_COMBO_PHY0_INIT>,
+			 <&cru SRST_USBDP_COMBO_PHY0_CMN>,
+			 <&cru SRST_USBDP_COMBO_PHY0_LANE>,
+			 <&cru SRST_USBDP_COMBO_PHY0_PCS>,
+			 <&cru SRST_P_USBDPPHY0>;
+		reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
+		rockchip,u2phy-grf = <&usb2phy0_grf>;
+		rockchip,usb-grf = <&usb_grf>;
+		rockchip,usbdpphy-grf = <&usbdpphy0_grf>;
+		rockchip,vo-grf = <&vo0_grf>;
+		status = "disabled";
+	};
+
 	combphy0_ps: phy@fee00000 {
 		compatible = "rockchip,rk3588-naneng-combphy";
 		reg = <0x0 0xfee00000 0x0 0x100>;
@@ -2487,19 +2665,6 @@
 			#interrupt-cells = <2>;
 		};
 	};
-
-	av1d: video-codec@fdc70000 {
-		compatible = "rockchip,rk3588-av1-vpu";
-		reg = <0x0 0xfdc70000 0x0 0x800>;
-		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>;
-		interrupt-names = "vdpu";
-		assigned-clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>;
-		assigned-clock-rates = <400000000>, <400000000>;
-		clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>;
-		clock-names = "aclk", "hclk";
-		power-domains = <&power RK3588_PD_AV1>;
-		resets = <&cru SRST_A_AV1>, <&cru SRST_P_AV1>, <&cru SRST_A_AV1_BIU>, <&cru SRST_P_AV1_BIU>;
-	};
 };
 
 #include "rk3588s-pinctrl.dtsi"

diff --git a/src/arm64/socionext/uniphier-ld11-global.dts b/src/arm64/socionext/uniphier-ld11-global.dts
index da44a15..a251c43 100644
--- a/src/arm64/socionext/uniphier-ld11-global.dts
+++ b/src/arm64/socionext/uniphier-ld11-global.dts

@@ -111,7 +111,7 @@
 &i2c0 {
 	status = "okay";
 
-	tas5707a@1d {
+	audio-codec@1d {
 		compatible = "ti,tas5711";
 		reg = <0x1d>;
 		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 4) GPIO_ACTIVE_LOW>;
@@ -124,7 +124,7 @@
 		PVDD_C-supply = <&amp_vcc_reg>;
 		PVDD_D-supply = <&amp_vcc_reg>;
 
-		port@0 {
+		port {
 			tas_speaker: endpoint {
 				dai-format = "i2s";
 				remote-endpoint = <&i2s_hpcmout1>;

diff --git a/src/arm64/socionext/uniphier-ld20-global.dts b/src/arm64/socionext/uniphier-ld20-global.dts
index a01579c..79f6db2 100644
--- a/src/arm64/socionext/uniphier-ld20-global.dts
+++ b/src/arm64/socionext/uniphier-ld20-global.dts

@@ -111,7 +111,7 @@
 &i2c0 {
 	status = "okay";
 
-	tas5707@1b {
+	audio-codec@1b {
 		compatible = "ti,tas5711";
 		reg = <0x1b>;
 		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 0) GPIO_ACTIVE_LOW>;
@@ -124,7 +124,7 @@
 		PVDD_C-supply = <&amp_vcc_reg>;
 		PVDD_D-supply = <&amp_vcc_reg>;
 
-		port@0 {
+		port {
 			tas_speaker: endpoint {
 				dai-format = "i2s";
 				remote-endpoint = <&i2s_hpcmout1>;

diff --git a/src/arm64/sprd/sc9860.dtsi b/src/arm64/sprd/sc9860.dtsi
index e27eb3e..31952d3 100644
--- a/src/arm64/sprd/sc9860.dtsi
+++ b/src/arm64/sprd/sc9860.dtsi

@@ -113,7 +113,7 @@
 		};
 	};
 
-	idle-states{
+	idle-states {
 		entry-method = "psci";
 
 		CORE_PD: core_pd {
@@ -135,18 +135,6 @@
 		};
 	};
 
-	gic: interrupt-controller@12001000 {
-		compatible = "arm,gic-400";
-		reg = <0 0x12001000 0 0x1000>,
-		      <0 0x12002000 0 0x2000>,
-		      <0 0x12004000 0 0x2000>,
-		      <0 0x12006000 0 0x2000>;
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8)
-					| IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
@@ -165,7 +153,7 @@
 	};
 
 	pmu {
-		compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
@@ -185,6 +173,18 @@
 	};
 
 	soc {
+		gic: interrupt-controller@12001000 {
+			compatible = "arm,gic-400";
+			reg = <0 0x12001000 0 0x1000>,
+			      <0 0x12002000 0 0x2000>,
+			      <0 0x12004000 0 0x2000>,
+			      <0 0x12006000 0 0x2000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8)
+						| IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
 		pmu_gate: pmu-gate {
 			compatible = "sprd,sc9860-pmu-gate";
 			sprd,syscon = <&pmu_regs>; /* 0x402b0000 */
@@ -207,7 +207,7 @@
 			#clock-cells = <1>;
 		};
 
-		aon_prediv: aon-prediv {
+		aon_prediv: aon-prediv@402d0000 {
 			compatible = "sprd,sc9860-aon-prediv";
 			reg = <0 0x402d0000 0 0x400>;
 			clocks = <&ext_26m>, <&pll 0>,
@@ -684,33 +684,5 @@
 				};
 			};
 		};
-
-		gpio-keys {
-			compatible = "gpio-keys";
-
-			key-volumedown {
-				label = "Volume Down Key";
-				linux,code = <KEY_VOLUMEDOWN>;
-				gpios = <&eic_debounce 2 GPIO_ACTIVE_LOW>;
-				debounce-interval = <2>;
-				wakeup-source;
-			};
-
-			key-volumeup {
-				label = "Volume Up Key";
-				linux,code = <KEY_VOLUMEUP>;
-				gpios = <&pmic_eic 10 GPIO_ACTIVE_HIGH>;
-				debounce-interval = <2>;
-				wakeup-source;
-			};
-
-			key-power {
-				label = "Power Key";
-				linux,code = <KEY_POWER>;
-				gpios = <&pmic_eic 1 GPIO_ACTIVE_HIGH>;
-				debounce-interval = <2>;
-				wakeup-source;
-			};
-		};
 	};
 };

diff --git a/src/arm64/sprd/sc9863a.dtsi b/src/arm64/sprd/sc9863a.dtsi
index 22d81ac..53e5b77 100644
--- a/src/arm64/sprd/sc9863a.dtsi
+++ b/src/arm64/sprd/sc9863a.dtsi

@@ -134,7 +134,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a55-pmu";
 		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,

diff --git a/src/arm64/sprd/sharkl3.dtsi b/src/arm64/sprd/sharkl3.dtsi
index 206a4af..9b4ee0b 100644
--- a/src/arm64/sprd/sharkl3.dtsi
+++ b/src/arm64/sprd/sharkl3.dtsi

@@ -24,7 +24,7 @@
 			#size-cells = <1>;
 			ranges = <0 0 0x20e00000 0x4000>;
 
-			apahb_gate: apahb-gate {
+			apahb_gate: apahb-gate@0 {
 				compatible = "sprd,sc9863a-apahb-gate";
 				reg = <0x0 0x1020>;
 				#clock-cells = <1>;
@@ -39,7 +39,7 @@
 			#size-cells = <1>;
 			ranges = <0 0 0x402b0000 0x4000>;
 
-			pmu_gate: pmu-gate {
+			pmu_gate: pmu-gate@0 {
 				compatible = "sprd,sc9863a-pmu-gate";
 				reg = <0 0x1200>;
 				clocks = <&ext_26m>;
@@ -56,7 +56,7 @@
 			#size-cells = <1>;
 			ranges = <0 0 0x402e0000 0x4000>;
 
-			aonapb_gate: aonapb-gate {
+			aonapb_gate: aonapb-gate@0 {
 				compatible = "sprd,sc9863a-aonapb-gate";
 				reg = <0 0x1100>;
 				#clock-cells = <1>;
@@ -71,7 +71,7 @@
 			#size-cells = <1>;
 			ranges = <0 0 0x40353000 0x3000>;
 
-			pll: pll {
+			pll: pll@0 {
 				compatible = "sprd,sc9863a-pll";
 				reg = <0 0x100>;
 				clocks = <&ext_26m>;
@@ -88,7 +88,7 @@
 			#size-cells = <1>;
 			ranges = <0 0 0x40359000 0x3000>;
 
-			mpll: mpll {
+			mpll: mpll@0 {
 				compatible = "sprd,sc9863a-mpll";
 				reg = <0 0x100>;
 				#clock-cells = <1>;
@@ -103,7 +103,7 @@
 			#size-cells = <1>;
 			ranges = <0 0 0x4035c000 0x3000>;
 
-			rpll: rpll {
+			rpll: rpll@0 {
 				compatible = "sprd,sc9863a-rpll";
 				reg = <0 0x100>;
 				clocks = <&ext_26m>;
@@ -120,7 +120,7 @@
 			#size-cells = <1>;
 			ranges = <0 0 0x40363000 0x3000>;
 
-			dpll: dpll {
+			dpll: dpll@0 {
 				compatible = "sprd,sc9863a-dpll";
 				reg = <0 0x100>;
 				#clock-cells = <1>;
@@ -135,7 +135,7 @@
 			#size-cells = <1>;
 			ranges = <0 0 0x60800000 0x3000>;
 
-			mm_gate: mm-gate {
+			mm_gate: mm-gate@0 {
 				compatible = "sprd,sc9863a-mm-gate";
 				reg = <0 0x1100>;
 				#clock-cells = <1>;
@@ -150,7 +150,7 @@
 			#size-cells = <1>;
 			ranges = <0 0 0x71300000 0x4000>;
 
-			apapb_gate: apapb-gate {
+			apapb_gate: apapb-gate@0 {
 				compatible = "sprd,sc9863a-apapb-gate";
 				reg = <0 0x1000>;
 				clocks = <&ext_26m>;

diff --git a/src/arm64/sprd/sp9860g-1h10.dts b/src/arm64/sprd/sp9860g-1h10.dts
index 6b95fd9..1ce3cbb 100644
--- a/src/arm64/sprd/sp9860g-1h10.dts
+++ b/src/arm64/sprd/sp9860g-1h10.dts

@@ -24,7 +24,7 @@
 		spi0 = &adi_bus;
 	};
 
-	memory{
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0 0x60000000>,
 		      <0x1 0x80000000 0 0x60000000>;
@@ -34,6 +34,34 @@
 		stdout-path = "serial1:115200n8";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-volumedown {
+			label = "Volume Down Key";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&eic_debounce 2 GPIO_ACTIVE_LOW>;
+			debounce-interval = <2>;
+			wakeup-source;
+		};
+
+		key-volumeup {
+			label = "Volume Up Key";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pmic_eic 10 GPIO_ACTIVE_HIGH>;
+			debounce-interval = <2>;
+			wakeup-source;
+		};
+
+		key-power {
+			label = "Power Key";
+			linux,code = <KEY_POWER>;
+			gpios = <&pmic_eic 1 GPIO_ACTIVE_HIGH>;
+			debounce-interval = <2>;
+			wakeup-source;
+		};
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;

diff --git a/src/arm64/sprd/whale2.dtsi b/src/arm64/sprd/whale2.dtsi
index fece497..7068bfd 100644
--- a/src/arm64/sprd/whale2.dtsi
+++ b/src/arm64/sprd/whale2.dtsi

@@ -64,7 +64,7 @@
 			reg = <0 0x70b00000 0 0x40000>;
 		};
 
-		ap-apb {
+		ap-apb@70000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;

diff --git a/src/arm64/st/stm32mp25-pinctrl.dtsi b/src/arm64/st/stm32mp25-pinctrl.dtsi
index 66791a9..7a82896 100644
--- a/src/arm64/st/stm32mp25-pinctrl.dtsi
+++ b/src/arm64/st/stm32mp25-pinctrl.dtsi

@@ -6,6 +6,23 @@
 #include <dt-bindings/pinctrl/stm32-pinfunc.h>
 
 &pinctrl {
+	i2c2_pins_a: i2c2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 5, AF9)>, /* I2C2_SCL */
+				 <STM32_PINMUX('B', 4, AF9)>; /* I2C2_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c2_sleep_pins_a: i2c2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 5, ANALOG)>, /* I2C2_SCL */
+				 <STM32_PINMUX('B', 4, ANALOG)>; /* I2C2_SDA */
+		};
+	};
+
 	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('E', 4, AF10)>, /* SDMMC1_D0 */
@@ -60,6 +77,28 @@
 		};
 	};
 
+	spi3_pins_a: spi3-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 7, AF1)>, /* SPI3_SCK */
+				 <STM32_PINMUX('B', 8, AF1)>; /* SPI3_MOSI */
+			drive-push-pull;
+			bias-disable;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 10, AF1)>; /* SPI3_MISO */
+			bias-disable;
+		};
+	};
+
+	spi3_sleep_pins_a: spi3-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 7, ANALOG)>, /* SPI3_SCK */
+				 <STM32_PINMUX('B', 8, ANALOG)>, /* SPI3_MOSI */
+				 <STM32_PINMUX('B', 10, ANALOG)>; /* SPI3_MISO */
+		};
+	};
+
 	usart2_pins_a: usart2-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('A', 4, AF6)>; /* USART2_TX */
@@ -90,3 +129,46 @@
 		};
 	};
 };
+
+&pinctrl_z {
+	i2c8_pins_a: i2c8-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 4, AF8)>, /* I2C8_SCL */
+				 <STM32_PINMUX('Z', 3, AF8)>; /* I2C8_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c8_sleep_pins_a: i2c8-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C8_SCL */
+				 <STM32_PINMUX('Z', 3, ANALOG)>; /* I2C8_SDA */
+		};
+	};
+};
+
+&pinctrl_z {
+	spi8_pins_a: spi8-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('Z', 2, AF3)>, /* SPI8_SCK */
+				 <STM32_PINMUX('Z', 0, AF3)>; /* SPI8_MOSI */
+			drive-push-pull;
+			bias-disable;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('Z', 1, AF3)>; /* SPI8_MISO */
+			bias-disable;
+		};
+	};
+
+	spi8_sleep_pins_a: spi8-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('Z', 2, ANALOG)>, /* SPI8_SCK */
+				 <STM32_PINMUX('Z', 0, ANALOG)>, /* SPI8_MOSI */
+				 <STM32_PINMUX('Z', 1, ANALOG)>; /* SPI8_MISO */
+		};
+	};
+};

diff --git a/src/arm64/st/stm32mp251.dtsi b/src/arm64/st/stm32mp251.dtsi
index 5dd4f35..dcd0656 100644
--- a/src/arm64/st/stm32mp251.dtsi
+++ b/src/arm64/st/stm32mp251.dtsi

@@ -3,7 +3,9 @@
  * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
  * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
  */
+#include <dt-bindings/clock/st,stm32mp25-rcc.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/st,stm32mp25-rcc.h>
 
 / {
 	#address-cells = <2>;
@@ -35,34 +37,16 @@
 	};
 
 	clocks {
-		ck_flexgen_08: ck-flexgen-08 {
+		clk_dsi_txbyte: txbyteclk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <100000000>;
+			clock-frequency = <0>;
 		};
 
-		ck_flexgen_51: ck-flexgen-51 {
+		clk_rcbsec: clk-rcbsec {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <200000000>;
-		};
-
-		ck_icn_ls_mcu: ck-icn-ls-mcu {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <200000000>;
-		};
-
-		ck_icn_p_vdec: ck-icn-p-vdec {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <200000000>;
-		};
-
-		ck_icn_p_venc: ck-icn-p-venc {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <200000000>;
+			clock-frequency = <64000000>;
 		};
 	};
 
@@ -109,10 +93,10 @@
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&intc>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 		always-on;
 	};
 
@@ -123,31 +107,235 @@
 		interrupt-parent = <&intc>;
 		ranges = <0x0 0x0 0x0 0x80000000>;
 
-		rifsc: rifsc-bus@42080000 {
-			compatible = "simple-bus";
+		rifsc: bus@42080000 {
+			compatible = "st,stm32mp25-rifsc", "simple-bus";
 			reg = <0x42080000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			#access-controller-cells = <1>;
 			ranges;
 
+			spi2: spi@400b0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32mp25-spi";
+				reg = <0x400b0000 0x400>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SPI2>;
+				resets = <&rcc SPI2_R>;
+				access-controllers = <&rifsc 23>;
+				status = "disabled";
+			};
+
+			spi3: spi@400c0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32mp25-spi";
+				reg = <0x400c0000 0x400>;
+				interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SPI3>;
+				resets = <&rcc SPI3_R>;
+				access-controllers = <&rifsc 24>;
+				status = "disabled";
+			};
+
 			usart2: serial@400e0000 {
 				compatible = "st,stm32h7-uart";
 				reg = <0x400e0000 0x400>;
 				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&ck_flexgen_08>;
+				clocks = <&rcc CK_KER_USART2>;
+				access-controllers = <&rifsc 32>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@40120000 {
+				compatible = "st,stm32mp25-i2c";
+				reg = <0x40120000 0x400>;
+				interrupt-names = "event";
+				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_I2C1>;
+				resets = <&rcc I2C1_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 41>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@40130000 {
+				compatible = "st,stm32mp25-i2c";
+				reg = <0x40130000 0x400>;
+				interrupt-names = "event";
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_I2C2>;
+				resets = <&rcc I2C2_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 42>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@40140000 {
+				compatible = "st,stm32mp25-i2c";
+				reg = <0x40140000 0x400>;
+				interrupt-names = "event";
+				interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_I2C3>;
+				resets = <&rcc I2C3_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 43>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@40150000 {
+				compatible = "st,stm32mp25-i2c";
+				reg = <0x40150000 0x400>;
+				interrupt-names = "event";
+				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_I2C4>;
+				resets = <&rcc I2C4_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 44>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@40160000 {
+				compatible = "st,stm32mp25-i2c";
+				reg = <0x40160000 0x400>;
+				interrupt-names = "event";
+				interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_I2C5>;
+				resets = <&rcc I2C5_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 45>;
 				status = "disabled";
 			};
 
+			i2c6: i2c@40170000 {
+				compatible = "st,stm32mp25-i2c";
+				reg = <0x40170000 0x400>;
+				interrupt-names = "event";
+				interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_I2C6>;
+				resets = <&rcc I2C6_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 46>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@40180000 {
+				compatible = "st,stm32mp25-i2c";
+				reg = <0x40180000 0x400>;
+				interrupt-names = "event";
+				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_I2C7>;
+				resets = <&rcc I2C7_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 47>;
+				status = "disabled";
+			};
+
+			spi1: spi@40230000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32mp25-spi";
+				reg = <0x40230000 0x400>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SPI1>;
+				resets = <&rcc SPI1_R>;
+				access-controllers = <&rifsc 22>;
+				status = "disabled";
+			};
+
+			spi4: spi@40240000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32mp25-spi";
+				reg = <0x40240000 0x400>;
+				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SPI4>;
+				resets = <&rcc SPI4_R>;
+				access-controllers = <&rifsc 25>;
+				status = "disabled";
+			};
+
+			spi5: spi@40280000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32mp25-spi";
+				reg = <0x40280000 0x400>;
+				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SPI5>;
+				resets = <&rcc SPI5_R>;
+				access-controllers = <&rifsc 26>;
+				status = "disabled";
+			};
+
+			spi6: spi@40350000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32mp25-spi";
+				reg = <0x40350000 0x400>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SPI6>;
+				resets = <&rcc SPI6_R>;
+				access-controllers = <&rifsc 27>;
+				status = "disabled";
+			};
+
+			spi7: spi@40360000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32mp25-spi";
+				reg = <0x40360000 0x400>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SPI7>;
+				resets = <&rcc SPI7_R>;
+				access-controllers = <&rifsc 28>;
+				status = "disabled";
+			};
+
+			spi8: spi@46020000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32mp25-spi";
+				reg = <0x46020000 0x400>;
+				interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SPI8>;
+				resets = <&rcc SPI8_R>;
+				access-controllers = <&rifsc 29>;
+				status = "disabled";
+			};
+
+			i2c8: i2c@46040000 {
+				compatible = "st,stm32mp25-i2c";
+				reg = <0x46040000 0x400>;
+				interrupt-names = "event";
+				interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_I2C8>;
+				resets = <&rcc I2C8_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 48>;
+				status = "disabled";
+			};
+
 			sdmmc1: mmc@48220000 {
 				compatible = "st,stm32mp25-sdmmc2", "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00353180>;
 				reg = <0x48220000 0x400>, <0x44230400 0x8>;
 				interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&ck_flexgen_51>;
+				clocks = <&rcc CK_KER_SDMMC1 >;
 				clock-names = "apb_pclk";
+				resets = <&rcc SDMMC1_R>;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
 				max-frequency = <120000000>;
+				access-controllers = <&rifsc 76>;
 				status = "disabled";
 			};
 		};
@@ -168,6 +356,186 @@
 			};
 		};
 
+		rcc: clock-controller@44200000 {
+			compatible = "st,stm32mp25-rcc";
+			reg = <0x44200000 0x10000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&scmi_clk CK_SCMI_HSE>,
+				<&scmi_clk CK_SCMI_HSI>,
+				<&scmi_clk CK_SCMI_MSI>,
+				<&scmi_clk CK_SCMI_LSE>,
+				<&scmi_clk CK_SCMI_LSI>,
+				<&scmi_clk CK_SCMI_HSE_DIV2>,
+				<&scmi_clk CK_SCMI_ICN_HS_MCU>,
+				<&scmi_clk CK_SCMI_ICN_LS_MCU>,
+				<&scmi_clk CK_SCMI_ICN_SDMMC>,
+				<&scmi_clk CK_SCMI_ICN_DDR>,
+				<&scmi_clk CK_SCMI_ICN_DISPLAY>,
+				<&scmi_clk CK_SCMI_ICN_HSL>,
+				<&scmi_clk CK_SCMI_ICN_NIC>,
+				<&scmi_clk CK_SCMI_ICN_VID>,
+				<&scmi_clk CK_SCMI_FLEXGEN_07>,
+				<&scmi_clk CK_SCMI_FLEXGEN_08>,
+				<&scmi_clk CK_SCMI_FLEXGEN_09>,
+				<&scmi_clk CK_SCMI_FLEXGEN_10>,
+				<&scmi_clk CK_SCMI_FLEXGEN_11>,
+				<&scmi_clk CK_SCMI_FLEXGEN_12>,
+				<&scmi_clk CK_SCMI_FLEXGEN_13>,
+				<&scmi_clk CK_SCMI_FLEXGEN_14>,
+				<&scmi_clk CK_SCMI_FLEXGEN_15>,
+				<&scmi_clk CK_SCMI_FLEXGEN_16>,
+				<&scmi_clk CK_SCMI_FLEXGEN_17>,
+				<&scmi_clk CK_SCMI_FLEXGEN_18>,
+				<&scmi_clk CK_SCMI_FLEXGEN_19>,
+				<&scmi_clk CK_SCMI_FLEXGEN_20>,
+				<&scmi_clk CK_SCMI_FLEXGEN_21>,
+				<&scmi_clk CK_SCMI_FLEXGEN_22>,
+				<&scmi_clk CK_SCMI_FLEXGEN_23>,
+				<&scmi_clk CK_SCMI_FLEXGEN_24>,
+				<&scmi_clk CK_SCMI_FLEXGEN_25>,
+				<&scmi_clk CK_SCMI_FLEXGEN_26>,
+				<&scmi_clk CK_SCMI_FLEXGEN_27>,
+				<&scmi_clk CK_SCMI_FLEXGEN_28>,
+				<&scmi_clk CK_SCMI_FLEXGEN_29>,
+				<&scmi_clk CK_SCMI_FLEXGEN_30>,
+				<&scmi_clk CK_SCMI_FLEXGEN_31>,
+				<&scmi_clk CK_SCMI_FLEXGEN_32>,
+				<&scmi_clk CK_SCMI_FLEXGEN_33>,
+				<&scmi_clk CK_SCMI_FLEXGEN_34>,
+				<&scmi_clk CK_SCMI_FLEXGEN_35>,
+				<&scmi_clk CK_SCMI_FLEXGEN_36>,
+				<&scmi_clk CK_SCMI_FLEXGEN_37>,
+				<&scmi_clk CK_SCMI_FLEXGEN_38>,
+				<&scmi_clk CK_SCMI_FLEXGEN_39>,
+				<&scmi_clk CK_SCMI_FLEXGEN_40>,
+				<&scmi_clk CK_SCMI_FLEXGEN_41>,
+				<&scmi_clk CK_SCMI_FLEXGEN_42>,
+				<&scmi_clk CK_SCMI_FLEXGEN_43>,
+				<&scmi_clk CK_SCMI_FLEXGEN_44>,
+				<&scmi_clk CK_SCMI_FLEXGEN_45>,
+				<&scmi_clk CK_SCMI_FLEXGEN_46>,
+				<&scmi_clk CK_SCMI_FLEXGEN_47>,
+				<&scmi_clk CK_SCMI_FLEXGEN_48>,
+				<&scmi_clk CK_SCMI_FLEXGEN_49>,
+				<&scmi_clk CK_SCMI_FLEXGEN_50>,
+				<&scmi_clk CK_SCMI_FLEXGEN_51>,
+				<&scmi_clk CK_SCMI_FLEXGEN_52>,
+				<&scmi_clk CK_SCMI_FLEXGEN_53>,
+				<&scmi_clk CK_SCMI_FLEXGEN_54>,
+				<&scmi_clk CK_SCMI_FLEXGEN_55>,
+				<&scmi_clk CK_SCMI_FLEXGEN_56>,
+				<&scmi_clk CK_SCMI_FLEXGEN_57>,
+				<&scmi_clk CK_SCMI_FLEXGEN_58>,
+				<&scmi_clk CK_SCMI_FLEXGEN_59>,
+				<&scmi_clk CK_SCMI_FLEXGEN_60>,
+				<&scmi_clk CK_SCMI_FLEXGEN_61>,
+				<&scmi_clk CK_SCMI_FLEXGEN_62>,
+				<&scmi_clk CK_SCMI_FLEXGEN_63>,
+				<&scmi_clk CK_SCMI_ICN_APB1>,
+				<&scmi_clk CK_SCMI_ICN_APB2>,
+				<&scmi_clk CK_SCMI_ICN_APB3>,
+				<&scmi_clk CK_SCMI_ICN_APB4>,
+				<&scmi_clk CK_SCMI_ICN_APBDBG>,
+				<&scmi_clk CK_SCMI_TIMG1>,
+				<&scmi_clk CK_SCMI_TIMG2>,
+				<&scmi_clk CK_SCMI_PLL3>,
+				<&clk_dsi_txbyte>;
+		};
+
+		exti1: interrupt-controller@44220000 {
+			compatible = "st,stm32mp1-exti", "syscon";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x44220000 0x400>;
+			interrupts-extended =
+				<&intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_0 */
+				<&intc GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_10 */
+				<&intc GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 1   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,						/* EXTI_20 */
+				<&intc GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_30 */
+				<&intc GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<&intc GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_40 */
+				<&intc GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_50 */
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,						/* EXTI_60 */
+				<&intc GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 10  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_70 */
+				<0>,
+				<&intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,						/* EXTI_80 */
+				<0>,
+				<0>,
+				<&intc GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		syscfg: syscon@44230000 {
 			compatible = "st,stm32mp25-syscfg", "syscon";
 			reg = <0x44230000 0x10000>;
@@ -178,6 +546,8 @@
 			#size-cells = <1>;
 			compatible = "st,stm32mp257-pinctrl";
 			ranges = <0 0x44240000 0xa0400>;
+			interrupt-parent = <&exti1>;
+			st,syscfg = <&exti1 0x60 0xff>;
 			pins-are-numbered;
 
 			gpioa: gpio@44240000 {
@@ -186,7 +556,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x0 0x400>;
-				clocks = <&ck_icn_ls_mcu>;
+				clocks = <&scmi_clk CK_SCMI_GPIOA>;
 				st,bank-name = "GPIOA";
 				status = "disabled";
 			};
@@ -197,7 +567,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x10000 0x400>;
-				clocks = <&ck_icn_ls_mcu>;
+				clocks = <&scmi_clk CK_SCMI_GPIOB>;
 				st,bank-name = "GPIOB";
 				status = "disabled";
 			};
@@ -208,7 +578,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x20000 0x400>;
-				clocks = <&ck_icn_ls_mcu>;
+				clocks = <&scmi_clk CK_SCMI_GPIOC>;
 				st,bank-name = "GPIOC";
 				status = "disabled";
 			};
@@ -219,7 +589,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x30000 0x400>;
-				clocks = <&ck_icn_ls_mcu>;
+				clocks = <&scmi_clk CK_SCMI_GPIOD>;
 				st,bank-name = "GPIOD";
 				status = "disabled";
 			};
@@ -230,7 +600,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x40000 0x400>;
-				clocks = <&ck_icn_ls_mcu>;
+				clocks = <&scmi_clk CK_SCMI_GPIOE>;
 				st,bank-name = "GPIOE";
 				status = "disabled";
 			};
@@ -241,7 +611,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x50000 0x400>;
-				clocks = <&ck_icn_ls_mcu>;
+				clocks = <&scmi_clk CK_SCMI_GPIOF>;
 				st,bank-name = "GPIOF";
 				status = "disabled";
 			};
@@ -252,7 +622,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x60000 0x400>;
-				clocks = <&ck_icn_ls_mcu>;
+				clocks = <&scmi_clk CK_SCMI_GPIOG>;
 				st,bank-name = "GPIOG";
 				status = "disabled";
 			};
@@ -263,7 +633,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x70000 0x400>;
-				clocks = <&ck_icn_ls_mcu>;
+				clocks = <&scmi_clk CK_SCMI_GPIOH>;
 				st,bank-name = "GPIOH";
 				status = "disabled";
 			};
@@ -274,7 +644,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x80000 0x400>;
-				clocks = <&ck_icn_ls_mcu>;
+				clocks = <&scmi_clk CK_SCMI_GPIOI>;
 				st,bank-name = "GPIOI";
 				status = "disabled";
 			};
@@ -285,7 +655,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x90000 0x400>;
-				clocks = <&ck_icn_ls_mcu>;
+				clocks = <&scmi_clk CK_SCMI_GPIOJ>;
 				st,bank-name = "GPIOJ";
 				status = "disabled";
 			};
@@ -296,7 +666,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0xa0000 0x400>;
-				clocks = <&ck_icn_ls_mcu>;
+				clocks = <&scmi_clk CK_SCMI_GPIOK>;
 				st,bank-name = "GPIOK";
 				status = "disabled";
 			};
@@ -307,6 +677,8 @@
 			#size-cells = <1>;
 			compatible = "st,stm32mp257-z-pinctrl";
 			ranges = <0 0x46200000 0x400>;
+			interrupt-parent = <&exti1>;
+			st,syscfg = <&exti1 0x60 0xff>;
 			pins-are-numbered;
 
 			gpioz: gpio@46200000 {
@@ -315,12 +687,91 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0 0x400>;
-				clocks = <&ck_icn_ls_mcu>;
+				clocks = <&scmi_clk CK_SCMI_GPIOZ>;
 				st,bank-name = "GPIOZ";
 				st,bank-ioport = <11>;
 				status = "disabled";
 			};
 
 		};
+
+		exti2: interrupt-controller@46230000 {
+			compatible = "st,stm32mp1-exti", "syscon";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x46230000 0x400>;
+			interrupts-extended =
+				<&intc GIC_SPI 17  IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_0 */
+				<&intc GIC_SPI 18  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 19  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 20  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 21  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 22  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 23  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 24  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 25  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 26  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 27  IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_10 */
+				<&intc GIC_SPI 28  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 29  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 30  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 31  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 32  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 12  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 13  IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<0>,						/* EXTI_20 */
+				<&intc GIC_SPI 14  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 15  IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<&intc GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_30 */
+				<&intc GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<&intc GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_40 */
+				<0>,
+				<0>,
+				<&intc GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 11  IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<&intc GIC_SPI 5   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 4   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 6   IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_50 */
+				<&intc GIC_SPI 7   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 2   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 3   IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,						/* EXTI_60 */
+				<&intc GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<&intc GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;	/* EXTI_70 */
+		};
 	};
 };

diff --git a/src/arm64/st/stm32mp253.dtsi b/src/arm64/st/stm32mp253.dtsi
index af48e82..029f889 100644
--- a/src/arm64/st/stm32mp253.dtsi
+++ b/src/arm64/st/stm32mp253.dtsi

@@ -20,4 +20,11 @@
 			     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
+
+	timer {
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
 };

diff --git a/src/arm64/st/stm32mp255.dtsi b/src/arm64/st/stm32mp255.dtsi
index 17f197c..f689b47 100644
--- a/src/arm64/st/stm32mp255.dtsi
+++ b/src/arm64/st/stm32mp255.dtsi

@@ -5,22 +5,21 @@
  */
 #include "stm32mp253.dtsi"
 
-/ {
-	soc@0 {
-		rifsc: rifsc-bus@42080000 {
-			vdec: vdec@480d0000 {
-				compatible = "st,stm32mp25-vdec";
-				reg = <0x480d0000 0x3c8>;
-				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&ck_icn_p_vdec>;
-			};
+&rifsc {
+	vdec: vdec@480d0000 {
+		compatible = "st,stm32mp25-vdec";
+		reg = <0x480d0000 0x3c8>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rcc CK_BUS_VDEC>;
+		access-controllers = <&rifsc 89>;
 
-			venc: venc@480e0000 {
-				compatible = "st,stm32mp25-venc";
-				reg = <0x480e0000 0x800>;
-				interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&ck_icn_ls_mcu>;
-			};
-		};
 	};
-};
+
+	venc: venc@480e0000 {
+		compatible = "st,stm32mp25-venc";
+		reg = <0x480e0000 0x800>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rcc CK_BUS_VENC>;
+		access-controllers = <&rifsc 90>;
+	};
+};
\ No newline at end of file

diff --git a/src/arm64/st/stm32mp257f-ev1.dts b/src/arm64/st/stm32mp257f-ev1.dts
index b2d3afb..27b7360 100644
--- a/src/arm64/st/stm32mp257f-ev1.dts
+++ b/src/arm64/st/stm32mp257f-ev1.dts

@@ -55,6 +55,26 @@
 	status = "okay";
 };
 
+&i2c2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c2_pins_a>;
+	pinctrl-1 = <&i2c2_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <100>;
+	i2c-scl-falling-time-ns = <13>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c8 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c8_pins_a>;
+	pinctrl-1 = <&i2c8_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <57>;
+	i2c-scl-falling-time-ns = <7>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
 &sdmmc1 {
 	pinctrl-names = "default", "opendrain", "sleep";
 	pinctrl-0 = <&sdmmc1_b4_pins_a>;
@@ -68,6 +88,20 @@
 	status = "okay";
 };
 
+&spi3 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi3_pins_a>;
+	pinctrl-1 = <&spi3_sleep_pins_a>;
+	status = "disabled";
+};
+
+&spi8 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi8_pins_a>;
+	pinctrl-1 = <&spi8_sleep_pins_a>;
+	status = "disabled";
+};
+
 &usart2 {
 	pinctrl-names = "default", "idle", "sleep";
 	pinctrl-0 = <&usart2_pins_a>;

diff --git a/src/arm64/synaptics/berlin4ct.dtsi b/src/arm64/synaptics/berlin4ct.dtsi
index 53d616c..71e4bfc 100644
--- a/src/arm64/synaptics/berlin4ct.dtsi
+++ b/src/arm64/synaptics/berlin4ct.dtsi

@@ -88,7 +88,7 @@
 	};
 
 	pmu {
-		compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,

diff --git a/src/arm64/tesla/fsd.dtsi b/src/arm64/tesla/fsd.dtsi
index 047a83c..690b4ed 100644
--- a/src/arm64/tesla/fsd.dtsi
+++ b/src/arm64/tesla/fsd.dtsi

@@ -304,7 +304,7 @@
 	};
 
 	arm-pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a72-pmu";
 		interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,

diff --git a/src/arm64/ti/k3-am62-lp-sk.dts b/src/arm64/ti/k3-am62-lp-sk.dts
index c414905..9a17bd3 100644
--- a/src/arm64/ti/k3-am62-lp-sk.dts
+++ b/src/arm64/ti/k3-am62-lp-sk.dts

@@ -166,7 +166,6 @@
 
 		interrupt-parent = <&gic500>;
 		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
-		ti,power-button;
 
 		regulators {
 			buck1_reg: buck1 {

diff --git a/src/arm64/ti/k3-am62-main.dtsi b/src/arm64/ti/k3-am62-main.dtsi
index e9cffca..448a59d 100644
--- a/src/arm64/ti/k3-am62-main.dtsi
+++ b/src/arm64/ti/k3-am62-main.dtsi

@@ -619,10 +619,11 @@
 
 	usbss0: dwc3-usb@f900000 {
 		compatible = "ti,am62-usb";
-		reg = <0x00 0x0f900000 0x00 0x800>;
+		reg = <0x00 0x0f900000 0x00 0x800>,
+		      <0x00 0x0f908000 0x00 0x400>;
 		clocks = <&k3_clks 161 3>;
 		clock-names = "ref";
-		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>;
+		ti,syscon-phy-pll-refclk = <&usb0_phy_ctrl 0x0>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
@@ -644,10 +645,11 @@
 
 	usbss1: dwc3-usb@f910000 {
 		compatible = "ti,am62-usb";
-		reg = <0x00 0x0f910000 0x00 0x800>;
+		reg = <0x00 0x0f910000 0x00 0x800>,
+		      <0x00 0x0f918000 0x00 0x400>;
 		clocks = <&k3_clks 162 3>;
 		clock-names = "ref";
-		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
+		ti,syscon-phy-pll-refclk = <&usb1_phy_ctrl 0x0>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;

diff --git a/src/arm64/ti/k3-am62-verdin-dahlia.dtsi b/src/arm64/ti/k3-am62-verdin-dahlia.dtsi
index 6c4cec8..e8f4d13 100644
--- a/src/arm64/ti/k3-am62-verdin-dahlia.dtsi
+++ b/src/arm64/ti/k3-am62-verdin-dahlia.dtsi

@@ -22,6 +22,7 @@
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&codec_dai>;
 		simple-audio-card,name = "verdin-wm8904";
+		simple-audio-card,mclk-fs = <256>;
 		simple-audio-card,routing =
 			"Headphone Jack", "HPOUTL",
 			"Headphone Jack", "HPOUTR",
@@ -35,7 +36,6 @@
 			"Line", "Line In Jack";
 
 		codec_dai: simple-audio-card,codec {
-			clocks = <&audio_refclk1>;
 			sound-dai = <&wm8904_1a>;
 		};
 
@@ -43,6 +43,15 @@
 			sound-dai = <&mcasp0>;
 		};
 	};
+
+	reg_usb_hub: regulator-usb-hub {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		regulator-name = "HUB_PWR_EN";
+	};
 };
 
 /* Verdin ETHs */
@@ -160,7 +169,8 @@
 	pinctrl-0 = <&pinctrl_gpio_1>,
 		    <&pinctrl_gpio_2>,
 		    <&pinctrl_gpio_3>,
-		    <&pinctrl_gpio_4>;
+		    <&pinctrl_gpio_4>,
+		    <&pinctrl_pcie_1_reset>;
 };
 
 /* Verdin I2C_3_HDMI */
@@ -183,6 +193,11 @@
 	status = "okay";
 };
 
+/* Do not force CTRL_SLEEP_MOCI# always enabled */
+&reg_force_sleep_moci {
+	status = "disabled";
+};
+
 /* Verdin SD_1 */
 &sdhci1 {
 	status = "okay";
@@ -203,7 +218,15 @@
 };
 
 &usb1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	usb-hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		vdd-supply = <&reg_usb_hub>;
+	};
 };
 
 /* Verdin CTRL_WAKE1_MICO# */
@@ -211,6 +234,11 @@
 	status = "okay";
 };
 
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+	status = "okay";
+};
+
 /* Verdin UART_2 */
 &wkup_uart0 {
 	status = "okay";

diff --git a/src/arm64/ti/k3-am62-verdin-dev.dtsi b/src/arm64/ti/k3-am62-verdin-dev.dtsi
index be62648..74eec1a 100644
--- a/src/arm64/ti/k3-am62-verdin-dev.dtsi
+++ b/src/arm64/ti/k3-am62-verdin-dev.dtsi

@@ -181,7 +181,8 @@
 	pinctrl-0 = <&pinctrl_gpio_1>,
 		    <&pinctrl_gpio_2>,
 		    <&pinctrl_gpio_3>,
-		    <&pinctrl_gpio_4>;
+		    <&pinctrl_gpio_4>,
+		    <&pinctrl_pcie_1_reset>;
 };
 
 /* Verdin I2C_3_HDMI */
@@ -232,6 +233,11 @@
 	status = "okay";
 };
 
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+	status = "okay";
+};
+
 /* Verdin UART_2 */
 &wkup_uart0 {
 	status = "okay";

diff --git a/src/arm64/ti/k3-am62-verdin-mallow.dtsi b/src/arm64/ti/k3-am62-verdin-mallow.dtsi
index 77b1beb..754216d 100644
--- a/src/arm64/ti/k3-am62-verdin-mallow.dtsi
+++ b/src/arm64/ti/k3-am62-verdin-mallow.dtsi

@@ -81,10 +81,10 @@
 &main_gpio0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>,
-		    <&pinctrl_gpio_1>,
-		    <&pinctrl_gpio_2>,
-		    <&pinctrl_gpio_3>,
-		    <&pinctrl_gpio_4>;
+		    <&pinctrl_gpio_5>,
+		    <&pinctrl_gpio_6>,
+		    <&pinctrl_gpio_7>,
+		    <&pinctrl_gpio_8>;
 };
 
 /* Verdin I2C_1 */
@@ -149,6 +149,15 @@
 	status = "okay";
 };
 
+&mcu_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_1>,
+		    <&pinctrl_gpio_2>,
+		    <&pinctrl_gpio_3>,
+		    <&pinctrl_gpio_4>,
+		    <&pinctrl_pcie_1_reset>;
+};
+
 /* Verdin I2C_3_HDMI */
 &mcu_i2c0 {
 	status = "okay";
@@ -192,6 +201,11 @@
 	status = "okay";
 };
 
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+	status = "okay";
+};
+
 /* Verdin UART_2 */
 &wkup_uart0 {
 	status = "okay";

diff --git a/src/arm64/ti/k3-am62-verdin-yavia.dtsi b/src/arm64/ti/k3-am62-verdin-yavia.dtsi
index 997dfaf..7372d39 100644
--- a/src/arm64/ti/k3-am62-verdin-yavia.dtsi
+++ b/src/arm64/ti/k3-am62-verdin-yavia.dtsi

@@ -159,7 +159,8 @@
 	pinctrl-0 = <&pinctrl_gpio_1>,
 		    <&pinctrl_gpio_2>,
 		    <&pinctrl_gpio_3>,
-		    <&pinctrl_gpio_4>;
+		    <&pinctrl_gpio_4>,
+		    <&pinctrl_pcie_1_reset>;
 };
 
 /* Verdin I2C_3_HDMI */
@@ -205,6 +206,11 @@
 	status = "okay";
 };
 
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+	status = "okay";
+};
+
 /* Verdin UART_2 */
 &wkup_uart0 {
 	status = "okay";

diff --git a/src/arm64/ti/k3-am62-verdin.dtsi b/src/arm64/ti/k3-am62-verdin.dtsi
index e8d8857..2038c5e 100644
--- a/src/arm64/ti/k3-am62-verdin.dtsi
+++ b/src/arm64/ti/k3-am62-verdin.dtsi

@@ -76,7 +76,7 @@
 
 	memory@80000000 {
 		device_type = "memory";
-		reg = <0x00000000 0x80000000 0x00000000 0x40000000>; /* 1G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>; /* 2G RAM */
 	};
 
 	opp-table {
@@ -138,6 +138,22 @@
 		vin-supply = <&reg_1v8>;
 	};
 
+	/*
+	 * By default we enable CTRL_SLEEP_MOCI#, this is required to have
+	 * peripherals on the carrier board powered.
+	 * If more granularity or power saving is required this can be disabled
+	 * in the carrier board device tree files.
+	 */
+	reg_force_sleep_moci: regulator-force-sleep-moci {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "CTRL_SLEEP_MOCI#";
+	};
+
 	/* Verdin SD_1 Power Supply */
 	reg_sdhc1_vmmc: regulator-sdhci1 {
 		compatible = "regulator-fixed";
@@ -457,6 +473,13 @@
 		>;
 	};
 
+	/* Verdin SD_1_CD# as GPIO */
+	pinctrl_sd1_cd_gpio: main-gpio1-48-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 7) /* (D17) MMC1_SDCD.GPIO1_48 */ /* SODIMM 84 */
+		>;
+	};
+
 	/* Verdin DSI_1_INT# (pulled-up as active-low) */
 	pinctrl_dsi1_int: main-gpio1-49-default-pins {
 		pinctrl-single,pins = <
@@ -571,7 +594,6 @@
 			AM62X_IOPAD(0x22c, PIN_INPUT,        0) /* (B21) MMC1_DAT1 */ /* SODIMM 82 */
 			AM62X_IOPAD(0x228, PIN_INPUT,        0) /* (C21) MMC1_DAT2 */ /* SODIMM 70 */
 			AM62X_IOPAD(0x224, PIN_INPUT,        0) /* (D22) MMC1_DAT3 */ /* SODIMM 72 */
-			AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 0) /* (D17) MMC1_SDCD */ /* SODIMM 84 */
 		>;
 	};
 
@@ -979,14 +1001,6 @@
 		"",
 		"",
 		"";
-
-	verdin_ctrl_sleep_moci: ctrl-sleep-moci-hog {
-		gpio-hog;
-		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
-		gpios = <31 GPIO_ACTIVE_HIGH>;
-		line-name = "CTRL_SLEEP_MOCI#";
-		output-high;
-	};
 };
 
 &main_gpio1 {
@@ -1407,6 +1421,15 @@
 		"",
 		"",
 		"";
+
+	verdin_pcie_1_reset_hog: pcie-1-reset-hog {
+		gpio-hog;
+		/* Verdin PCIE_1_RESET# (SODIMM 244) */
+		gpios = <0 GPIO_ACTIVE_LOW>;
+		line-name = "PCIE_1_RESET#";
+		output-low;
+		status = "disabled";
+	};
 };
 
 /* Verdin CAN_2 */
@@ -1441,10 +1464,12 @@
 /* Verdin SD_1 */
 &sdhci1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdhci1>;
+	pinctrl-0 = <&pinctrl_sdhci1>, <&pinctrl_sd1_cd_gpio>;
+	cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	vmmc-supply = <&reg_sdhc1_vmmc>;
 	vqmmc-supply = <&reg_sdhc1_vqmmc>;
+	ti,fails-without-test-cd;
 	status = "disabled";
 };
 

diff --git a/src/arm64/ti/k3-am62-wakeup.dtsi b/src/arm64/ti/k3-am62-wakeup.dtsi
index 23ce1bf..66ddf2d 100644
--- a/src/arm64/ti/k3-am62-wakeup.dtsi
+++ b/src/arm64/ti/k3-am62-wakeup.dtsi

@@ -21,6 +21,16 @@
 			compatible = "ti,am654-chipid";
 			reg = <0x14 0x4>;
 		};
+
+		usb0_phy_ctrl: syscon@4008 {
+			compatible = "ti,am62-usb-phy-ctrl", "syscon";
+			reg = <0x4008 0x4>;
+		};
+
+		usb1_phy_ctrl: syscon@4018 {
+			compatible = "ti,am62-usb-phy-ctrl", "syscon";
+			reg = <0x4018 0x4>;
+		};
 	};
 
 	target-module@2b300050 {

diff --git a/src/arm64/ti/k3-am625-beagleplay.dts b/src/arm64/ti/k3-am625-beagleplay.dts
index a34e0df..18e3070 100644
--- a/src/arm64/ti/k3-am625-beagleplay.dts
+++ b/src/arm64/ti/k3-am625-beagleplay.dts

@@ -82,6 +82,17 @@
 		};
 	};
 
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_en_pins_default>;
+		/* Internal power on time(Figure 8-3) * 2 */
+		post-power-on-delay-ms = <10>;
+		/* Re-enable time(Figure 8-2) + 20uS */
+		power-off-delay-us = <80>;
+		reset-gpios = <&main_gpio0 38 GPIO_ACTIVE_LOW>;
+	};
+
 	vsys_5v0: regulator-1 {
 		bootph-all;
 		compatible = "regulator-fixed";
@@ -104,20 +115,6 @@
 		regulator-boot-on;
 	};
 
-	wlan_en: regulator-3 {
-		/* OUTPUT of SN74AVC2T244DQMR */
-		compatible = "regulator-fixed";
-		regulator-name = "wlan_en";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		enable-active-high;
-		regulator-always-on;
-		vin-supply = <&vdd_3v3>;
-		gpio = <&main_gpio0 38 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_en_pins_default>;
-	};
-
 	vdd_3v3_sd: regulator-4 {
 		/* output of TPS22918DBVR-U21 */
 		bootph-all;
@@ -292,6 +289,8 @@
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */
 			AM62X_IOPAD(0x015c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */
+			AM62X_IOPAD(0x003c, PIN_INPUT, 7) /* (M25) GPMC0_AD0.GPIO0_15 */
+			AM62X_IOPAD(0x018c, PIN_INPUT, 7) /* (AC21) RGMII2_RD2.GPIO1_5 */
 		>;
 	};
 
@@ -383,7 +382,6 @@
 			AM62X_IOPAD(0x016c, PIN_INPUT, 1) /* (Y18) RGMII2_TD0.RMII2_TXD0 */
 			AM62X_IOPAD(0x0170, PIN_INPUT, 1) /* (AA18) RGMII2_TD1.RMII2_TXD1 */
 			AM62X_IOPAD(0x0164, PIN_INPUT, 1) /* (AA19) RGMII2_TX_CTL.RMII2_TX_EN */
-			AM62X_IOPAD(0x018c, PIN_OUTPUT, 7) /* (AC21) RGMII2_RD2.GPIO1_5 */
 			AM62X_IOPAD(0x0190, PIN_INPUT, 7) /* (AE22) RGMII2_RD3.GPIO1_6 */
 			AM62X_IOPAD(0x01f0, PIN_OUTPUT, 5) /* (A18) EXT_REFCLK1.CLKOUT0 */
 		>;
@@ -597,6 +595,9 @@
 
 	cpsw3g_phy0: ethernet-phy@0 {
 		reg = <0>;
+		reset-gpios = <&main_gpio0 15 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <50000>;
 	};
 
 	cpsw3g_phy1: ethernet-phy@1 {
@@ -615,7 +616,7 @@
 		"USR0", "USR1", "USR2", "USR3", "", "", "USR4",	/* 3-9 */
 		"EEPROM_WP",					/* 10 */
 		"CSI2_CAMERA_GPIO1", "CSI2_CAMERA_GPIO2",	/* 11-12 */
-		"CC1352P7_BOOT", "CC1352P7_RSTN", "", "", "",	/* 13-17 */
+		"CC1352P7_BOOT", "CC1352P7_RSTN", "GBE_RSTN", "", "",	/* 13-17 */
 		"USR_BUTTON", "", "", "", "", "", "", "", "",	/* 18-26 */
 		"", "", "", "", "", "", "", "", "", "HDMI_INT",	/* 27-36 */
 		"", "VDD_WLAN_EN", "", "", "WL_IRQ", "GBE_INTN",/* 37-42 */
@@ -839,13 +840,13 @@
 };
 
 &sdhci2 {
-	vmmc-supply = <&wlan_en>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&wifi_pins_default>, <&wifi_32k_clk>;
 	non-removable;
 	ti,fails-without-test-cd;
 	cap-power-off-card;
 	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
 	assigned-clocks = <&k3_clks 157 158>;
 	assigned-clock-parents = <&k3_clks 157 160>;
 	#address-cells = <1>;

diff --git a/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts b/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts
index a83a904..50d2573 100644
--- a/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts
+++ b/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts

@@ -31,7 +31,7 @@
 	can_tc1: can-phy0 {
 		compatible = "ti,tcan1042";
 		#phy-cells = <0>;
-		max-bitrate = <5000000>;
+		max-bitrate = <8000000>;
 		standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -66,6 +66,35 @@
 		};
 	};
 
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "phyBOARD-Lyra";
+		simple-audio-card,widgets =
+			"Microphone",           "Mic Jack",
+			"Headphone",            "Headphone Jack",
+			"Speaker",              "External Speaker";
+		simple-audio-card,routing =
+			"MIC3R",                "Mic Jack",
+			"Mic Jack",             "Mic Bias",
+			"Headphone Jack",       "HPLOUT",
+			"Headphone Jack",       "HPROUT",
+			"External Speaker",     "SPOP",
+			"External Speaker",     "SPOM";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp2>;
+		};
+
+		sound_master: simple-audio-card,codec {
+				sound-dai = <&audio_codec>;
+				clocks = <&audio_refclk1>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -82,6 +111,15 @@
 		};
 	};
 
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vcc_3v3_mmc: regulator-vcc-3v3-mmc {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3_MMC";
@@ -90,9 +128,24 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	vcc_3v3_sw: regulator-vcc-3v3-sw {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 };
 
 &main_pmx0 {
+	audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0a0, PIN_OUTPUT, 1) /* (K25) GPMC0_WPn.AUDIO_EXT_REFCLK1 */
+		>;
+	};
+
 	gpio_keys_pins_default: gpio-keys-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x1d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
@@ -150,6 +203,15 @@
 		>;
 	};
 
+	main_mcasp2_pins_default: main-mcasp2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x070, PIN_INPUT, 3) /* (T24) GPMC0_AD13.MCASP2_ACLKX */
+			AM62X_IOPAD(0x06c, PIN_INPUT, 3) /* (T22) GPMC0_AD12.MCASP2_AFSX */
+			AM62X_IOPAD(0x064, PIN_OUTPUT, 3) /* (T25) GPMC0_AD10.MCASP2_AXR2 */
+			AM62X_IOPAD(0x068, PIN_INPUT, 3) /* (R21) GPMC0_AD11.MCASP2_AXR3 */
+		>;
+	};
+
 	main_mmc1_pins_default: main-mmc1-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x23c, PIN_INPUT_PULLUP, 0) /* (A21) MMC1_CMD */
@@ -254,6 +316,21 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
+	audio_codec: audio-codec@18 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&audio_ext_refclk1_pins_default>;
+
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3007";
+		reg = <0x18>;
+		ai3x-micbias-vg = <2>;
+
+		AVDD-supply = <&vcc_3v3_sw>;
+		IOVDD-supply = <&vcc_3v3_sw>;
+		DRVDD-supply = <&vcc_3v3_sw>;
+		DVDD-supply = <&vcc_1v8>;
+	};
+
 	gpio_exp: gpio-expander@21 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_exp_int_pins_default>;
@@ -271,6 +348,24 @@
 				  "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET";
 	};
 
+	usb-pd@22 {
+		compatible = "ti,tps6598x";
+		reg = <0x22>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			self-powered;
+			data-role = "dual";
+			power-role = "sink";
+			port {
+				usb_con_hs: endpoint {
+					remote-endpoint = <&typec_hs>;
+				};
+			};
+		};
+	};
+
 	sii9022: bridge-hdmi@39 {
 		compatible = "sil,sii9022";
 		reg = <0x39>;
@@ -329,6 +424,28 @@
 	status = "okay";
 };
 
+&mcasp2 {
+	#sound-dai-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcasp2_pins_default>;
+
+	/* MCASP_IIS_MODE */
+	op-mode = <0>;
+	tdm-slots = <2>;
+
+	/* 0: INACTIVE, 1: TX, 2: RX */
+	serial-dir = <
+			0 0 1 2
+			0 0 0 0
+			0 0 0 0
+			0 0 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+	status = "okay";
+};
+
 &sdhci1 {
 	vmmc-supply = <&vcc_3v3_mmc>;
 	vqmmc-supply = <&vddshv5_sdio>;
@@ -350,7 +467,13 @@
 };
 
 &usb0 {
-	dr_mode = "peripheral";
+	usb-role-switch;
+
+	port {
+		typec_hs: endpoint {
+			remote-endpoint = <&usb_con_hs>;
+		};
+	};
 };
 
 &usb1 {

diff --git a/src/arm64/ti/k3-am62a-main.dtsi b/src/arm64/ti/k3-am62a-main.dtsi
index aa1e057..bf9c2d9 100644
--- a/src/arm64/ti/k3-am62a-main.dtsi
+++ b/src/arm64/ti/k3-am62a-main.dtsi

@@ -573,7 +573,6 @@
 		ti,itap-del-sel-sd-hs = <0x0>;
 		ti,itap-del-sel-sdr12 = <0x0>;
 		ti,itap-del-sel-sdr25 = <0x0>;
-		no-1-8-v;
 		status = "disabled";
 	};
 
@@ -597,16 +596,16 @@
 		ti,itap-del-sel-sd-hs = <0x0>;
 		ti,itap-del-sel-sdr12 = <0x0>;
 		ti,itap-del-sel-sdr25 = <0x0>;
-		no-1-8-v;
 		status = "disabled";
 	};
 
 	usbss0: dwc3-usb@f900000 {
 		compatible = "ti,am62-usb";
-		reg = <0x00 0x0f900000 0x00 0x800>;
+		reg = <0x00 0x0f900000 0x00 0x800>,
+		      <0x00 0x0f908000 0x00 0x400>;
 		clocks = <&k3_clks 161 3>;
 		clock-names = "ref";
-		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>;
+		ti,syscon-phy-pll-refclk = <&usb0_phy_ctrl 0x0>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
@@ -621,15 +620,18 @@
 			interrupt-names = "host", "peripheral";
 			maximum-speed = "high-speed";
 			dr_mode = "otg";
+			snps,usb2-gadget-lpm-disable;
+			snps,usb2-lpm-disable;
 		};
 	};
 
 	usbss1: dwc3-usb@f910000 {
 		compatible = "ti,am62-usb";
-		reg = <0x00 0x0f910000 0x00 0x800>;
+		reg = <0x00 0x0f910000 0x00 0x800>,
+		      <0x00 0x0f918000 0x00 0x400>;
 		clocks = <&k3_clks 162 3>;
 		clock-names = "ref";
-		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
+		ti,syscon-phy-pll-refclk = <&usb1_phy_ctrl 0x0>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
@@ -644,6 +646,8 @@
 			interrupt-names = "host", "peripheral";
 			maximum-speed = "high-speed";
 			dr_mode = "otg";
+			snps,usb2-gadget-lpm-disable;
+			snps,usb2-lpm-disable;
 		};
 	};
 
@@ -1051,4 +1055,11 @@
 			#size-cells = <0>;
 		};
 	};
+
+	vpu: video-codec@30210000 {
+		compatible = "ti,j721s2-wave521c", "cnm,wave521c";
+		reg = <0x00 0x30210000 0x00 0x10000>;
+		clocks = <&k3_clks 204 2>;
+		power-domains = <&k3_pds 204 TI_SCI_PD_EXCLUSIVE>;
+	};
 };

diff --git a/src/arm64/ti/k3-am62a-wakeup.dtsi b/src/arm64/ti/k3-am62a-wakeup.dtsi
index f7bec48..98043e9 100644
--- a/src/arm64/ti/k3-am62a-wakeup.dtsi
+++ b/src/arm64/ti/k3-am62a-wakeup.dtsi

@@ -17,6 +17,16 @@
 			compatible = "ti,am654-chipid";
 			reg = <0x14 0x4>;
 		};
+
+		usb0_phy_ctrl: syscon@4008 {
+			compatible = "ti,am62-usb-phy-ctrl", "syscon";
+			reg = <0x4008 0x4>;
+		};
+
+		usb1_phy_ctrl: syscon@4018 {
+			compatible = "ti,am62-usb-phy-ctrl", "syscon";
+			reg = <0x4018 0x4>;
+		};
 	};
 
 	wkup_uart0: serial@2b300000 {

diff --git a/src/arm64/ti/k3-am62a7-sk.dts b/src/arm64/ti/k3-am62a7-sk.dts
index f241637..fa43cd0 100644
--- a/src/arm64/ti/k3-am62a7-sk.dts
+++ b/src/arm64/ti/k3-am62a7-sk.dts

@@ -113,6 +113,20 @@
 		regulator-boot-on;
 	};
 
+	vddshv_sdio: regulator-5 {
+		compatible = "regulator-gpio";
+		regulator-name = "vddshv_sdio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vddshv_sdio_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&ldo1>;
+		gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -342,6 +356,12 @@
 			AM62AX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */
 		>;
 	};
+
+	vddshv_sdio_pins_default: vddshv-sdio-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */
+		>;
+	};
 };
 
 &mcu_pmx0 {
@@ -580,6 +600,7 @@
 	/* SD/MMC */
 	status = "okay";
 	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vddshv_sdio>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	disable-wp;

diff --git a/src/arm64/ti/k3-am62p-main.dtsi b/src/arm64/ti/k3-am62p-main.dtsi
index 7337a9e..900d1f9 100644
--- a/src/arm64/ti/k3-am62p-main.dtsi
+++ b/src/arm64/ti/k3-am62p-main.dtsi

@@ -635,6 +635,58 @@
 		status = "disabled";
 	};
 
+	usbss0: usb@f900000 {
+		compatible = "ti,am62-usb";
+		reg = <0x00 0x0f900000 0x00 0x800>,
+		      <0x00 0x0f908000 0x00 0x400>;
+		clocks = <&k3_clks 161 3>;
+		clock-names = "ref";
+		ti,syscon-phy-pll-refclk = <&usb0_phy_ctrl 0x0>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
+		ranges;
+		status = "disabled";
+
+		usb0: usb@31000000 {
+			compatible = "snps,dwc3";
+			reg = <0x00 0x31000000 0x00 0x50000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+			<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+			interrupt-names = "host", "peripheral";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+			snps,usb2-gadget-lpm-disable;
+			snps,usb2-lpm-disable;
+		};
+	};
+
+	usbss1: usb@f910000 {
+		compatible = "ti,am62-usb";
+		reg = <0x00 0x0f910000 0x00 0x800>,
+		      <0x00 0x0f918000 0x00 0x400>;
+		clocks = <&k3_clks 162 3>;
+		clock-names = "ref";
+		ti,syscon-phy-pll-refclk = <&usb1_phy_ctrl 0x0>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+		ranges;
+		status = "disabled";
+
+		usb1: usb@31100000 {
+			compatible = "snps,dwc3";
+			reg = <0x00 0x31100000 0x00 0x50000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+			<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+			interrupt-names = "host", "peripheral";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+			snps,usb2-gadget-lpm-disable;
+			snps,usb2-lpm-disable;
+		};
+	};
+
 	fss: bus@fc00000 {
 		compatible = "simple-bus";
 		reg = <0x00 0x0fc00000 0x00 0x70000>;
@@ -673,6 +725,7 @@
 		assigned-clock-parents = <&k3_clks 13 11>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		dmas = <&main_pktdma 0xc600 15>,
 		       <&main_pktdma 0xc601 15>,
@@ -696,6 +749,7 @@
 				label = "port1";
 				phys = <&phy_gmii_sel 1>;
 				mac-address = [00 00 00 00 00 00];
+				status = "disabled";
 			};
 
 			cpsw_port2: port@2 {
@@ -704,6 +758,7 @@
 				label = "port2";
 				phys = <&phy_gmii_sel 2>;
 				mac-address = [00 00 00 00 00 00];
+				status = "disabled";
 			};
 		};
 

diff --git a/src/arm64/ti/k3-am62p-wakeup.dtsi b/src/arm64/ti/k3-am62p-wakeup.dtsi
index a84756c..c71d962 100644
--- a/src/arm64/ti/k3-am62p-wakeup.dtsi
+++ b/src/arm64/ti/k3-am62p-wakeup.dtsi

@@ -18,6 +18,16 @@
 			reg = <0x14 0x4>;
 			bootph-all;
 		};
+
+		usb0_phy_ctrl: syscon@4008 {
+			compatible = "ti,am62-usb-phy-ctrl", "syscon";
+			reg = <0x4008 0x4>;
+		};
+
+		usb1_phy_ctrl: syscon@4018 {
+			compatible = "ti,am62-usb-phy-ctrl", "syscon";
+			reg = <0x4018 0x4>;
+		};
 	};
 
 	wkup_uart0: serial@2b300000 {

diff --git a/src/arm64/ti/k3-am62p5-sk.dts b/src/arm64/ti/k3-am62p5-sk.dts
index e86f34e..6e72346 100644
--- a/src/arm64/ti/k3-am62p5-sk.dts
+++ b/src/arm64/ti/k3-am62p5-sk.dts

@@ -27,6 +27,8 @@
 		spi0 = &ospi0;
 		ethernet0 = &cpsw_port1;
 		ethernet1 = &cpsw_port2;
+		usb0 = &usb0;
+		usb1 = &usb1;
 	};
 
 	chosen {
@@ -297,6 +299,12 @@
 		bootph-all;
 	};
 
+	main_usb1_pins_default: main-usb1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0258, PIN_INPUT, 0) /* (G21) USB1_DRVVBUS */
+		>;
+	};
+
 	main_wlirq_pins_default: main-wlirq-default-pins {
 		pinctrl-single,pins = <
 			AM62PX_IOPAD(0x0128, PIN_INPUT, 7) /* (K25) MMC2_SDWP.GPIO0_72 */
@@ -340,6 +348,36 @@
 	};
 };
 
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	typec_pd0: usb-power-controller@3f {
+		compatible = "ti,tps6598x";
+		reg = <0x3f>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			self-powered;
+			data-role = "dual";
+			power-role = "sink";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					usb_con_hs: endpoint {
+						remote-endpoint = <&usb0_hs_ep>;
+					};
+				};
+			};
+		};
+	};
+};
+
 &main_i2c1 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -431,16 +469,19 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_rgmii1_pins_default>,
 		    <&main_rgmii2_pins_default>;
+	status = "okay";
 };
 
 &cpsw_port1 {
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&cpsw3g_phy0>;
+	status = "okay";
 };
 
 &cpsw_port2 {
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&cpsw3g_phy1>;
+	status = "okay";
 };
 
 &cpsw3g_mdio {
@@ -463,6 +504,35 @@
 	};
 };
 
+&usbss0 {
+	status = "okay";
+	ti,vbus-divider;
+};
+
+&usbss1 {
+	status = "okay";
+	ti,vbus-divider;
+};
+
+&usb0 {
+	usb-role-switch;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@0 {
+		reg = <0>;
+		usb0_hs_ep: endpoint {
+			remote-endpoint = <&usb_con_hs>;
+		};
+	};
+};
+
+&usb1 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usb1_pins_default>;
+};
+
 &mcasp1 {
 	status = "okay";
 	#sound-dai-cells = <0>;
@@ -493,7 +563,7 @@
 	pinctrl-0 = <&ospi0_pins_default>;
 	bootph-all;
 
-	flash@0{
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-tx-bus-width = <8>;

diff --git a/src/arm64/ti/k3-am642-evm.dts b/src/arm64/ti/k3-am642-evm.dts
index 53fe1d0..e20e4ff 100644
--- a/src/arm64/ti/k3-am642-evm.dts
+++ b/src/arm64/ti/k3-am642-evm.dts

@@ -473,7 +473,6 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
-	current-speed = <115200>;
 };
 
 /* main_uart1 is reserved for firmware usage */

diff --git a/src/arm64/ti/k3-am642-phyboard-electra-gpio-fan.dtso b/src/arm64/ti/k3-am642-phyboard-electra-gpio-fan.dtso
new file mode 100644
index 0000000..5057658
--- /dev/null
+++ b/src/arm64/ti/k3-am642-phyboard-electra-gpio-fan.dtso

@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2024 PHYTEC America LLC
+ * Author: Nathan Morrisson <nmorrisson@phytec.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+	fan: gpio-fan {
+		compatible = "gpio-fan";
+		gpio-fan,speed-map = <0 0 8600 1>;
+		gpios = <&main_gpio0 28 GPIO_ACTIVE_LOW>;
+		#cooling-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_fan_pins_default>;
+	};
+};
+
+&main_pmx0 {
+	gpio_fan_pins_default: gpio-fan-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x070, PIN_OUTPUT, 7) /* (V18) GPMC0_AD13.GPIO0_28 */
+		>;
+	};
+};
+
+&thermal_zones {
+	main0_thermal: main0-thermal {
+		trips {
+			main0_thermal_trip0: main0-thermal-trip {
+				temperature = <65000>;  /* millicelsius */
+				hysteresis = <2000>;    /* millicelsius */
+				type = "active";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&main0_thermal_trip0>;
+				cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};

diff --git a/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts b/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts
index 8237b8c..6df331c 100644
--- a/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts
+++ b/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts

@@ -42,7 +42,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&can_tc1_pins_default>;
 		#phy-cells = <0>;
-		max-bitrate = <5000000>;
+		max-bitrate = <8000000>;
 		standby-gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -51,7 +51,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&can_tc2_pins_default>;
 		#phy-cells = <0>;
-		max-bitrate = <5000000>;
+		max-bitrate = <8000000>;
 		standby-gpios = <&main_gpio0 35 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -275,7 +275,6 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
-	current-speed = <115200>;
 };
 
 &main_uart1 {
@@ -283,7 +282,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart1_pins_default>;
 	uart-has-rtscts;
-	current-speed = <115200>;
 };
 
 &sdhci1 {

diff --git a/src/arm64/ti/k3-am642-sk.dts b/src/arm64/ti/k3-am642-sk.dts
index 67cd41b..5b028b3 100644
--- a/src/arm64/ti/k3-am642-sk.dts
+++ b/src/arm64/ti/k3-am642-sk.dts

@@ -381,7 +381,6 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
-	current-speed = <115200>;
 };
 
 &main_uart1 {

diff --git a/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi b/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi
index c50a585..ef78977 100644
--- a/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi
+++ b/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi

@@ -43,9 +43,33 @@
 };
 
 &icssg0_eth {
-	status = "disabled";
-};
+	compatible = "ti,am654-sr1-icssg-prueth";
+
+	ti,prus = <&pru0_0>, <&rtu0_0>, <&pru0_1>, <&rtu0_1>;
+	firmware-name = "ti-pruss/am65x-pru0-prueth-fw.elf",
+			"ti-pruss/am65x-rtu0-prueth-fw.elf",
+			"ti-pruss/am65x-pru1-prueth-fw.elf",
+			"ti-pruss/am65x-rtu1-prueth-fw.elf";
+
+	ti,pruss-gp-mux-sel = <2>,      /* MII mode */
+			      <2>,
+			      <2>,      /* MII mode */
+			      <2>;
 
-&icssg0_mdio {
-	status = "disabled";
+	dmas = <&main_udmap 0xc100>, /* egress slice 0 */
+	       <&main_udmap 0xc101>, /* egress slice 0 */
+	       <&main_udmap 0xc102>, /* egress slice 0 */
+	       <&main_udmap 0xc103>, /* egress slice 0 */
+	       <&main_udmap 0xc104>, /* egress slice 1 */
+	       <&main_udmap 0xc105>, /* egress slice 1 */
+	       <&main_udmap 0xc106>, /* egress slice 1 */
+	       <&main_udmap 0xc107>, /* egress slice 1 */
+	       <&main_udmap 0x4100>, /* ingress slice 0 */
+	       <&main_udmap 0x4101>, /* ingress slice 1 */
+	       <&main_udmap 0x4102>, /* mgmnt rsp slice 0 */
+	       <&main_udmap 0x4103>; /* mgmnt rsp slice 1 */
+	dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+		    "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+		    "rx0", "rx1",
+		    "rxmgm0", "rxmgm1";
 };

diff --git a/src/arm64/ti/k3-am65-main.dtsi b/src/arm64/ti/k3-am65-main.dtsi
index ff85711..ed71561 100644
--- a/src/arm64/ti/k3-am65-main.dtsi
+++ b/src/arm64/ti/k3-am65-main.dtsi

@@ -66,7 +66,7 @@
 		assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
 		ti,serdes-clk = <&serdes0_clk>;
 		#clock-cells = <1>;
-		mux-controls = <&serdes_mux 0>;
+		mux-controls = <&serdes0_mux 0>;
 	};
 
 	serdes1: serdes@910000 {
@@ -81,7 +81,7 @@
 		assigned-clock-parents = <&k3_clks 154 9>, <&k3_clks 154 5>;
 		ti,serdes-clk = <&serdes1_clk>;
 		#clock-cells = <1>;
-		mux-controls = <&serdes_mux 1>;
+		mux-controls = <&serdes1_mux 0>;
 	};
 
 	main_uart0: serial@2800000 {
@@ -89,7 +89,6 @@
 		reg = <0x00 0x02800000 0x00 0x100>;
 		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
 		status = "disabled";
 	};
@@ -436,18 +435,13 @@
 		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
+		ti,clkbuf-sel = <0x7>;
+		ti,trm-icp = <0x8>;
 		ti,otap-del-sel-legacy = <0x0>;
 		ti,otap-del-sel-mmc-hs = <0x0>;
-		ti,otap-del-sel-sd-hs = <0x0>;
-		ti,otap-del-sel-sdr12 = <0x0>;
-		ti,otap-del-sel-sdr25 = <0x0>;
-		ti,otap-del-sel-sdr50 = <0x8>;
-		ti,otap-del-sel-sdr104 = <0x7>;
-		ti,otap-del-sel-ddr50 = <0x5>;
 		ti,otap-del-sel-ddr52 = <0x5>;
 		ti,otap-del-sel-hs200 = <0x5>;
-		ti,otap-del-sel-hs400 = <0x0>;
-		ti,trm-icp = <0x8>;
+		ti,itap-del-sel-ddr52 = <0x0>;
 		dma-coherent;
 		status = "disabled";
 	};
@@ -459,18 +453,19 @@
 		clocks = <&k3_clks 48 0>, <&k3_clks 48 1>;
 		clock-names = "clk_ahb", "clk_xin";
 		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+		ti,clkbuf-sel = <0x7>;
+		ti,trm-icp = <0x8>;
 		ti,otap-del-sel-legacy = <0x0>;
-		ti,otap-del-sel-mmc-hs = <0x0>;
 		ti,otap-del-sel-sd-hs = <0x0>;
-		ti,otap-del-sel-sdr12 = <0x0>;
-		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
 		ti,otap-del-sel-sdr50 = <0x8>;
 		ti,otap-del-sel-sdr104 = <0x7>;
 		ti,otap-del-sel-ddr50 = <0x4>;
-		ti,otap-del-sel-ddr52 = <0x4>;
-		ti,otap-del-sel-hs200 = <0x7>;
-		ti,clkbuf-sel = <0x7>;
-		ti,trm-icp = <0x8>;
+		ti,itap-del-sel-legacy = <0xa>;
+		ti,itap-del-sel-sd-hs = <0x1>;
+		ti,itap-del-sel-sdr12 = <0xa>;
+		ti,itap-del-sel-sdr25 = <0x1>;
 		dma-coherent;
 		status = "disabled";
 	};
@@ -483,20 +478,25 @@
 		ranges = <0x0 0x0 0x00100000 0x1c000>;
 
 		serdes0_clk: clock@4080 {
-			compatible = "syscon";
-			reg = <0x00004080 0x4>;
+			compatible = "ti,am654-serdes-ctrl", "syscon";
+			reg = <0x4080 0x4>;
+
+			serdes0_mux: mux-controller {
+				compatible = "mmio-mux";
+				#mux-control-cells = <1>;
+				mux-reg-masks = <0x0 0x3>; /* lane select */
+			};
 		};
 
 		serdes1_clk: clock@4090 {
-			compatible = "syscon";
-			reg = <0x00004090 0x4>;
-		};
+			compatible = "ti,am654-serdes-ctrl", "syscon";
+			reg = <0x4090 0x4>;
 
-		serdes_mux: mux-controller {
-			compatible = "mmio-mux";
-			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */
-					<0x4090 0x3>; /* SERDES1 lane select */
+			serdes1_mux: mux-controller {
+				compatible = "mmio-mux";
+				#mux-control-cells = <1>;
+				mux-reg-masks = <0x0 0x3>; /* lane select */
+			};
 		};
 
 		dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 {

diff --git a/src/arm64/ti/k3-am65-mcu.dtsi b/src/arm64/ti/k3-am65-mcu.dtsi
index 6ff3ccc..8feab93 100644
--- a/src/arm64/ti/k3-am65-mcu.dtsi
+++ b/src/arm64/ti/k3-am65-mcu.dtsi

@@ -43,7 +43,6 @@
 		reg = <0x00 0x40a00000 0x00 0x100>;
 		interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <96000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
 		status = "disabled";
 	};
@@ -286,7 +285,11 @@
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
-		ranges;
+		ranges = <0x0 0x47000000 0x0 0x47000000 0x0 0x100>, /* FSS Control */
+			 <0x0 0x47040000 0x0 0x47040000 0x0 0x100>, /* OSPI0 Control */
+			 <0x0 0x47050000 0x0 0x47050000 0x0 0x100>, /* OSPI1 Control */
+			 <0x5 0x00000000 0x5 0x00000000 0x1 0x0000000>, /* OSPI0 Memory */
+			 <0x7 0x00000000 0x7 0x00000000 0x1 0x0000000>; /* OSPI1 Memory */
 
 		ospi0: spi@47040000 {
 			compatible = "ti,am654-ospi", "cdns,qspi-nor";

diff --git a/src/arm64/ti/k3-am65-wakeup.dtsi b/src/arm64/ti/k3-am65-wakeup.dtsi
index 3752789..eee072e 100644
--- a/src/arm64/ti/k3-am65-wakeup.dtsi
+++ b/src/arm64/ti/k3-am65-wakeup.dtsi

@@ -59,7 +59,6 @@
 		reg = <0x42300000 0x100>;
 		interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>;
 		status = "disabled";
 	};

diff --git a/src/arm64/ti/k3-am69-sk.dts b/src/arm64/ti/k3-am69-sk.dts
index 50de2a4..d88651c 100644
--- a/src/arm64/ti/k3-am69-sk.dts
+++ b/src/arm64/ti/k3-am69-sk.dts

@@ -517,18 +517,18 @@
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
-			J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */
-			J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */
-			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
-			J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */
+			J784S4_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_UART0_CTSn */
+			J784S4_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (L36) WKUP_UART0_RTSn */
+			J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
+			J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */
 		>;
 	};
 
 	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
-			J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
-			J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
+			J784S4_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
+			J784S4_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
 		>;
 	};
 

diff --git a/src/arm64/ti/k3-j7200-main.dtsi b/src/arm64/ti/k3-j7200-main.dtsi
index 657f9cc..9386bf3 100644
--- a/src/arm64/ti/k3-j7200-main.dtsi
+++ b/src/arm64/ti/k3-j7200-main.dtsi

@@ -440,7 +440,6 @@
 		reg = <0x00 0x02800000 0x00 0x100>;
 		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 146 2>;
 		clock-names = "fclk";
@@ -452,7 +451,6 @@
 		reg = <0x00 0x02810000 0x00 0x100>;
 		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 278 2>;
 		clock-names = "fclk";
@@ -464,7 +462,6 @@
 		reg = <0x00 0x02820000 0x00 0x100>;
 		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 279 2>;
 		clock-names = "fclk";
@@ -476,7 +473,6 @@
 		reg = <0x00 0x02830000 0x00 0x100>;
 		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 280 2>;
 		clock-names = "fclk";
@@ -488,7 +484,6 @@
 		reg = <0x00 0x02840000 0x00 0x100>;
 		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 281 2>;
 		clock-names = "fclk";
@@ -500,7 +495,6 @@
 		reg = <0x00 0x02850000 0x00 0x100>;
 		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 282 2>;
 		clock-names = "fclk";
@@ -512,7 +506,6 @@
 		reg = <0x00 0x02860000 0x00 0x100>;
 		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 283 2>;
 		clock-names = "fclk";
@@ -524,7 +517,6 @@
 		reg = <0x00 0x02870000 0x00 0x100>;
 		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 284 2>;
 		clock-names = "fclk";
@@ -536,7 +528,6 @@
 		reg = <0x00 0x02880000 0x00 0x100>;
 		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 285 2>;
 		clock-names = "fclk";
@@ -548,7 +539,6 @@
 		reg = <0x00 0x02890000 0x00 0x100>;
 		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 286 2>;
 		clock-names = "fclk";

diff --git a/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi b/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi
index 7cf21c9..fccaabf 100644
--- a/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi

@@ -259,7 +259,6 @@
 		reg = <0x00 0x42300000 0x00 0x100>;
 		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 287 2>;
 		clock-names = "fclk";
@@ -271,7 +270,6 @@
 		reg = <0x00 0x40a00000 0x00 0x100>;
 		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <96000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 149 2>;
 		clock-names = "fclk";
@@ -520,10 +518,12 @@
 
 	fss: bus@47000000 {
 		compatible = "simple-bus";
-		reg = <0x00 0x47000000 0x00 0x100>;
 		#address-cells = <2>;
 		#size-cells = <2>;
-		ranges;
+		ranges = <0x0 0x47000000 0x0 0x47000000 0x0 0x100>, /* FSS Control */
+			 <0x0 0x47034000 0x0 0x47040000 0x0 0x100>, /* HBMC Control */
+			 <0x0 0x47040000 0x0 0x47040000 0x0 0x100>, /* OSPI0 Control */
+			 <0x5 0x00000000 0x5 0x00000000 0x1 0x0000000>; /* HBMC/OSPI0 Memory */
 
 		hbmc_mux: mux-controller@47000004 {
 			compatible = "reg-mux";

diff --git a/src/arm64/ti/k3-j721e-main.dtsi b/src/arm64/ti/k3-j721e-main.dtsi
index c7eafbc..0da785b 100644
--- a/src/arm64/ti/k3-j721e-main.dtsi
+++ b/src/arm64/ti/k3-j721e-main.dtsi

@@ -1337,7 +1337,6 @@
 		reg = <0x00 0x02800000 0x00 0x100>;
 		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 146 0>;
 		clock-names = "fclk";
@@ -1349,7 +1348,6 @@
 		reg = <0x00 0x02810000 0x00 0x100>;
 		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 278 0>;
 		clock-names = "fclk";
@@ -1361,7 +1359,6 @@
 		reg = <0x00 0x02820000 0x00 0x100>;
 		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 279 0>;
 		clock-names = "fclk";
@@ -1373,7 +1370,6 @@
 		reg = <0x00 0x02830000 0x00 0x100>;
 		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 280 0>;
 		clock-names = "fclk";
@@ -1385,7 +1381,6 @@
 		reg = <0x00 0x02840000 0x00 0x100>;
 		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 281 0>;
 		clock-names = "fclk";
@@ -1397,7 +1392,6 @@
 		reg = <0x00 0x02850000 0x00 0x100>;
 		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 282 0>;
 		clock-names = "fclk";
@@ -1409,7 +1403,6 @@
 		reg = <0x00 0x02860000 0x00 0x100>;
 		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 283 0>;
 		clock-names = "fclk";
@@ -1421,7 +1414,6 @@
 		reg = <0x00 0x02870000 0x00 0x100>;
 		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 284 0>;
 		clock-names = "fclk";
@@ -1433,7 +1425,6 @@
 		reg = <0x00 0x02880000 0x00 0x100>;
 		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 285 0>;
 		clock-names = "fclk";
@@ -1445,7 +1436,6 @@
 		reg = <0x00 0x02890000 0x00 0x100>;
 		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 286 0>;
 		clock-names = "fclk";

diff --git a/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi b/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
index 4618b69..9349ae0 100644
--- a/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi

@@ -243,7 +243,6 @@
 		reg = <0x00 0x42300000 0x00 0x100>;
 		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 287 0>;
 		clock-names = "fclk";
@@ -255,7 +254,6 @@
 		reg = <0x00 0x40a00000 0x00 0x100>;
 		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <96000000>;
-		current-speed = <115200>;
 		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 149 0>;
 		clock-names = "fclk";
@@ -346,10 +344,14 @@
 
 	fss: bus@47000000 {
 		compatible = "simple-bus";
-		reg = <0x0 0x47000000 0x0 0x100>;
 		#address-cells = <2>;
 		#size-cells = <2>;
-		ranges;
+		ranges = <0x0 0x47000000 0x0 0x47000000 0x0 0x100>, /* FSS Control */
+			 <0x0 0x47034000 0x0 0x47034000 0x0 0x100>, /* HBMC Control */
+			 <0x0 0x47040000 0x0 0x47040000 0x0 0x100>, /* OSPI0 Control */
+			 <0x0 0x47050000 0x0 0x47050000 0x0 0x100>, /* OSPI1 Control */
+			 <0x5 0x00000000 0x5 0x00000000 0x1 0x0000000>, /* HBMC/OSPI0 Memory */
+			 <0x7 0x00000000 0x7 0x00000000 0x1 0x0000000>; /* OSPI1 Memory */
 
 		hbmc_mux: mux-controller@47000004 {
 			compatible = "reg-mux";

diff --git a/src/arm64/ti/k3-j721s2-main.dtsi b/src/arm64/ti/k3-j721s2-main.dtsi
index b70c861..9ed6949 100644
--- a/src/arm64/ti/k3-j721s2-main.dtsi
+++ b/src/arm64/ti/k3-j721s2-main.dtsi

@@ -459,7 +459,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02800000 0x00 0x200>;
 		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 146 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
@@ -470,7 +469,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02810000 0x00 0x200>;
 		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 350 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 350 TI_SCI_PD_EXCLUSIVE>;
@@ -481,7 +479,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02820000 0x00 0x200>;
 		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 351 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 351 TI_SCI_PD_EXCLUSIVE>;
@@ -492,7 +489,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02830000 0x00 0x200>;
 		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 352 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 352 TI_SCI_PD_EXCLUSIVE>;
@@ -503,7 +499,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02840000 0x00 0x200>;
 		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 353 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 353 TI_SCI_PD_EXCLUSIVE>;
@@ -514,7 +509,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02850000 0x00 0x200>;
 		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 354 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 354 TI_SCI_PD_EXCLUSIVE>;
@@ -525,7 +519,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02860000 0x00 0x200>;
 		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 355 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 355 TI_SCI_PD_EXCLUSIVE>;
@@ -536,7 +529,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02870000 0x00 0x200>;
 		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 356 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 356 TI_SCI_PD_EXCLUSIVE>;
@@ -547,7 +539,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02880000 0x00 0x200>;
 		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 357 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 357 TI_SCI_PD_EXCLUSIVE>;
@@ -558,7 +549,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02890000 0x00 0x200>;
 		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 358 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 358 TI_SCI_PD_EXCLUSIVE>;
@@ -778,8 +768,6 @@
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
-		/* Masking support for SDR104 capability */
-		sdhci-caps-mask = <0x00000003 0x00000000>;
 		status = "disabled";
 	};
 

diff --git a/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi b/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi
index eaf7f70..5ccb04c 100644
--- a/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi

@@ -298,7 +298,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x42300000 0x00 0x200>;
 		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 359 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 359 TI_SCI_PD_EXCLUSIVE>;
@@ -309,7 +308,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x40a00000 0x00 0x200>;
 		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 149 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;

diff --git a/src/arm64/ti/k3-j721s2.dtsi b/src/arm64/ti/k3-j721s2.dtsi
index be4502f..568e6a0 100644
--- a/src/arm64/ti/k3-j721s2.dtsi
+++ b/src/arm64/ti/k3-j721s2.dtsi

@@ -117,6 +117,7 @@
 		#size-cells = <2>;
 		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
 			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+			 <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */
 			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
 			 <0x00 0x0d800000 0x00 0x0d800000 0x00 0x00800000>, /* PCIe Core*/
 			 <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */

diff --git a/src/arm64/ti/k3-j722s-evm.dts b/src/arm64/ti/k3-j722s-evm.dts
index cee3a86..bf3c246 100644
--- a/src/arm64/ti/k3-j722s-evm.dts
+++ b/src/arm64/ti/k3-j722s-evm.dts

@@ -226,10 +226,7 @@
 &cpsw_port1 {
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&cpsw3g_phy0>;
-};
-
-&cpsw_port2 {
-	status = "disabled";
+	status = "okay";
 };
 
 &main_gpio1 {
@@ -369,6 +366,13 @@
 
 };
 
+&sdhci0 {
+	disable-wp;
+	bootph-all;
+	ti,driver-strength-ohm = <50>;
+	status = "okay";
+};
+
 &sdhci1 {
 	/* SD/MMC */
 	vmmc-supply = <&vdd_mmc1>;
@@ -377,7 +381,6 @@
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
-	no-1-8-v;
 	status = "okay";
 	bootph-all;
 };

diff --git a/src/arm64/ti/k3-j784s4-evm.dts b/src/arm64/ti/k3-j784s4-evm.dts
index 81fd7af..d511b25 100644
--- a/src/arm64/ti/k3-j784s4-evm.dts
+++ b/src/arm64/ti/k3-j784s4-evm.dts

@@ -343,16 +343,16 @@
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
-			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
-			J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */
+			J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
+			J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */
 		>;
 	};
 
 	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
-			J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
-			J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
+			J784S4_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
+			J784S4_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
 		>;
 	};
 

diff --git a/src/arm64/ti/k3-j784s4-main.dtsi b/src/arm64/ti/k3-j784s4-main.dtsi
index b67c374..6a4554c 100644
--- a/src/arm64/ti/k3-j784s4-main.dtsi
+++ b/src/arm64/ti/k3-j784s4-main.dtsi

@@ -404,7 +404,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02800000 0x00 0x200>;
 		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 146 0>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
@@ -415,7 +414,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02810000 0x00 0x200>;
 		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 388 0>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 388 TI_SCI_PD_EXCLUSIVE>;
@@ -426,7 +424,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02820000 0x00 0x200>;
 		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 389 0>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 389 TI_SCI_PD_EXCLUSIVE>;
@@ -437,7 +434,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02830000 0x00 0x200>;
 		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 390 0>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 390 TI_SCI_PD_EXCLUSIVE>;
@@ -448,7 +444,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02840000 0x00 0x200>;
 		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 391 0>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 391 TI_SCI_PD_EXCLUSIVE>;
@@ -459,7 +454,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02850000 0x00 0x200>;
 		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 392 0>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 392 TI_SCI_PD_EXCLUSIVE>;
@@ -470,7 +464,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02860000 0x00 0x200>;
 		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 393 0>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 393 TI_SCI_PD_EXCLUSIVE>;
@@ -481,7 +474,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02870000 0x00 0x200>;
 		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 394 0>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 394 TI_SCI_PD_EXCLUSIVE>;
@@ -492,7 +484,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02880000 0x00 0x200>;
 		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 395 0>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 395 TI_SCI_PD_EXCLUSIVE>;
@@ -503,7 +494,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02890000 0x00 0x200>;
 		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 396 0>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 396 TI_SCI_PD_EXCLUSIVE>;
@@ -914,8 +904,6 @@
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
-		sdhci-caps-mask = <0x00000003 0x00000000>;
-		no-1-8-v;
 		status = "disabled";
 	};
 

diff --git a/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi b/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi
index 77a8d99..2e18d91 100644
--- a/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi
+++ b/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi

@@ -304,7 +304,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x42300000 0x00 0x200>;
 		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 397 0>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 397 TI_SCI_PD_EXCLUSIVE>;
@@ -315,7 +314,6 @@
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x40a00000 0x00 0x200>;
 		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
-		current-speed = <115200>;
 		clocks = <&k3_clks 149 0>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
@@ -674,10 +672,13 @@
 
 	fss: bus@47000000 {
 		compatible = "simple-bus";
-		reg = <0x00 0x47000000 0x00 0x100>;
 		#address-cells = <2>;
 		#size-cells = <2>;
-		ranges;
+		ranges = <0x0 0x47000000 0x0 0x47000000 0x0 0x100>, /* FSS Control */
+			 <0x0 0x47040000 0x0 0x47040000 0x0 0x100>, /* OSPI0 Control */
+			 <0x0 0x47050000 0x0 0x47050000 0x0 0x100>, /* OSPI1 Control */
+			 <0x5 0x00000000 0x5 0x00000000 0x1 0x0000000>, /* OSPI0 Memory */
+			 <0x7 0x00000000 0x7 0x00000000 0x1 0x0000000>; /* OSPI1 Memory */
 
 		ospi0: spi@47040000 {
 			compatible = "ti,am654-ospi", "cdns,qspi-nor";

diff --git a/src/arm64/ti/k3-j784s4.dtsi b/src/arm64/ti/k3-j784s4.dtsi
index 6e2e92f..da7368e 100644
--- a/src/arm64/ti/k3-j784s4.dtsi
+++ b/src/arm64/ti/k3-j784s4.dtsi

@@ -234,6 +234,7 @@
 		#size-cells = <2>;
 		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
 			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+			 <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */
 			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
 			 <0x00 0x04210000 0x00 0x04210000 0x00 0x00010000>, /* VPU0 */
 			 <0x00 0x04220000 0x00 0x04220000 0x00 0x00010000>, /* VPU1 */

diff --git a/src/arm64/xilinx/zynqmp.dtsi b/src/arm64/xilinx/zynqmp.dtsi
index 25d20d8..d99830c 100644
--- a/src/arm64/xilinx/zynqmp.dtsi
+++ b/src/arm64/xilinx/zynqmp.dtsi

@@ -169,7 +169,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupt-parent = <&gic>;
 		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
@@ -906,6 +906,7 @@
 			reg = <0x0 0xff000000 0x0 0x1000>;
 			clock-names = "uart_clk", "pclk";
 			power-domains = <&zynqmp_firmware PD_UART_0>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_UART0>;
 		};
 
 		uart1: serial@ff010000 {
@@ -917,6 +918,7 @@
 			reg = <0x0 0xff010000 0x0 0x1000>;
 			clock-names = "uart_clk", "pclk";
 			power-domains = <&zynqmp_firmware PD_UART_1>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_UART1>;
 		};
 
 		usb0: usb@ff9d0000 {

diff --git a/src/loongarch/loongson-2k0500-ref.dts b/src/loongarch/loongson-2k0500-ref.dts
index 8aefb0c..a34734a 100644
--- a/src/loongarch/loongson-2k0500-ref.dts
+++ b/src/loongarch/loongson-2k0500-ref.dts

@@ -44,14 +44,14 @@
 &gmac0 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	bus_id = <0x0>;
 };
 
 &gmac1 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	bus_id = <0x1>;
 };
 

diff --git a/src/loongarch/loongson-2k0500.dtsi b/src/loongarch/loongson-2k0500.dtsi
index 444779c..3b38ff8 100644
--- a/src/loongarch/loongson-2k0500.dtsi
+++ b/src/loongarch/loongson-2k0500.dtsi

@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/loongson,ls2k-clk.h>
 
 / {
 	#address-cells = <2>;
@@ -19,14 +20,15 @@
 			compatible = "loongson,la264";
 			device_type = "cpu";
 			reg = <0x0>;
-			clocks = <&cpu_clk>;
+			clocks = <&clk LOONGSON2_NODE_CLK>;
 		};
 	};
 
-	cpu_clk: cpu-clk {
+	ref_100m: clock-ref-100m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <500000000>;
+		clock-frequency = <100000000>;
+		clock-output-names = "ref_100m";
 	};
 
 	cpuintc: interrupt-controller {
@@ -35,6 +37,28 @@
 		interrupt-controller;
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tsensor 0>;
+
+			trips {
+				cpu-alert {
+					temperature = <33000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu-crit {
+					temperature = <85000>;
+					hysteresis = <5000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	bus@10000000 {
 		compatible = "simple-bus";
 		ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
@@ -52,6 +76,54 @@
 			ranges = <1 0x0 0x0 0x16400000 0x4000>;
 		};
 
+		clk: clock-controller@1fe10400 {
+			compatible = "loongson,ls2k0500-clk";
+			reg = <0x0 0x1fe10400 0x0 0x2c>;
+			#clock-cells = <1>;
+			clocks = <&ref_100m>;
+			clock-names = "ref_100m";
+		};
+
+		dma-controller@1fe10c00 {
+			compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma";
+			reg = <0 0x1fe10c00 0 0x8>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <67>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		dma-controller@1fe10c10 {
+			compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma";
+			reg = <0 0x1fe10c10 0 0x8>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <68>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		dma-controller@1fe10c20 {
+			compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma";
+			reg = <0 0x1fe10c20 0 0x8>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <69>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		dma-controller@1fe10c30 {
+			compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma";
+			reg = <0 0x1fe10c30 0 0x8>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <70>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
 		liointc0: interrupt-controller@1fe11400 {
 			compatible = "loongson,liointc-2.0";
 			reg = <0x0 0x1fe11400 0x0 0x40>,
@@ -139,6 +211,14 @@
 			status = "disabled";
 		};
 
+		tsensor: thermal-sensor@1fe11500 {
+			compatible = "loongson,ls2k0500-thermal", "loongson,ls2k1000-thermal";
+			reg = <0x0 0x1fe11500 0x0 0x30>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		uart0: serial@1ff40800 {
 			compatible = "ns16550a";
 			reg = <0x0 0x1ff40800 0x0 0x10>;

diff --git a/src/loongarch/loongson-2k1000-ref.dts b/src/loongarch/loongson-2k1000-ref.dts
index ed4d324..23cf26c 100644
--- a/src/loongarch/loongson-2k1000-ref.dts
+++ b/src/loongarch/loongson-2k1000-ref.dts

@@ -43,7 +43,7 @@
 &gmac0 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&phy0>;
 	mdio {
 		compatible = "snps,dwmac-mdio";
@@ -58,7 +58,7 @@
 &gmac1 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&phy1>;
 	mdio {
 		compatible = "snps,dwmac-mdio";
@@ -113,10 +113,6 @@
 	status = "okay";
 };
 
-&clk {
-	status = "okay";
-};
-
 &rtc0 {
 	status = "okay";
 };

diff --git a/src/loongarch/loongson-2k1000.dtsi b/src/loongarch/loongson-2k1000.dtsi
index b6aeb1f..9218014 100644
--- a/src/loongarch/loongson-2k1000.dtsi
+++ b/src/loongarch/loongson-2k1000.dtsi

@@ -159,7 +159,6 @@
 			#clock-cells = <1>;
 			clocks = <&ref_100m>;
 			clock-names = "ref_100m";
-			status = "disabled";
 		};
 
 		gpio0: gpio@1fe00500 {

diff --git a/src/loongarch/loongson-2k2000-ref.dts b/src/loongarch/loongson-2k2000-ref.dts
index 74b99bd..ea9e698 100644
--- a/src/loongarch/loongson-2k2000-ref.dts
+++ b/src/loongarch/loongson-2k2000-ref.dts

@@ -92,7 +92,7 @@
 &gmac2 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&phy2>;
 	mdio {
 		compatible = "snps,dwmac-mdio";

diff --git a/src/loongarch/loongson-2k2000.dtsi b/src/loongarch/loongson-2k2000.dtsi
index 9eab2d0..0953c57 100644
--- a/src/loongarch/loongson-2k2000.dtsi
+++ b/src/loongarch/loongson-2k2000.dtsi

@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/loongson,ls2k-clk.h>
 
 / {
 	#address-cells = <2>;
@@ -19,21 +20,22 @@
 			compatible = "loongson,la364";
 			device_type = "cpu";
 			reg = <0x0>;
-			clocks = <&cpu_clk>;
+			clocks = <&clk LOONGSON2_NODE_CLK>;
 		};
 
 		cpu1: cpu@2 {
 			compatible = "loongson,la364";
 			device_type = "cpu";
 			reg = <0x1>;
-			clocks = <&cpu_clk>;
+			clocks = <&clk LOONGSON2_NODE_CLK>;
 		};
 	};
 
-	cpu_clk: cpu-clk {
+	ref_100m: clock-ref-100m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <1400000000>;
+		clock-frequency = <100000000>;
+		clock-output-names = "ref_100m";
 	};
 
 	cpuintc: interrupt-controller {
@@ -42,6 +44,28 @@
 		interrupt-controller;
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tsensor 0>;
+
+			trips {
+				cpu-alert {
+					temperature = <40000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu-crit {
+					temperature = <85000>;
+					hysteresis = <5000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	bus@10000000 {
 		compatible = "simple-bus";
 		ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
@@ -58,6 +82,14 @@
 			ranges = <1 0x0 0x0 0x18400000 0x4000>;
 		};
 
+		clk: clock-controller@10010480 {
+			compatible = "loongson,ls2k2000-clk";
+			reg = <0x0 0x10010480 0x0 0x100>;
+			#clock-cells = <1>;
+			clocks = <&ref_100m>;
+			clock-names = "ref_100m";
+		};
+
 		pmc: power-management@100d0000 {
 			compatible = "loongson,ls2k2000-pmc", "loongson,ls2k0500-pmc", "syscon";
 			reg = <0x0 0x100d0000 0x0 0x58>;
@@ -80,6 +112,15 @@
 			};
 		};
 
+		tsensor: thermal-sensor@1fe01460 {
+			compatible = "loongson,ls2k2000-thermal";
+			reg = <0x0 0x1fe01460 0x0 0x30>,
+			      <0x0 0x1fe0019c 0x0 0x4>;
+			interrupt-parent = <&liointc>;
+			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		liointc: interrupt-controller@1fe01400 {
 			compatible = "loongson,liointc-1.0";
 			reg = <0x0 0x1fe01400 0x0 0x64>;

diff --git a/src/mips/ralink/mt7621.dtsi b/src/mips/ralink/mt7621.dtsi
index 6e95e6f..0704eab 100644
--- a/src/mips/ralink/mt7621.dtsi
+++ b/src/mips/ralink/mt7621.dtsi

@@ -5,52 +5,145 @@
 #include <dt-bindings/reset/mt7621-reset.h>
 
 / {
+	compatible = "mediatek,mt7621-soc";
+
 	#address-cells = <1>;
 	#size-cells = <1>;
-	compatible = "mediatek,mt7621-soc";
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		cpu@0 {
-			device_type = "cpu";
 			compatible = "mips,mips1004Kc";
 			reg = <0>;
+			device_type = "cpu";
 		};
 
 		cpu@1 {
-			device_type = "cpu";
 			compatible = "mips,mips1004Kc";
 			reg = <1>;
+			device_type = "cpu";
 		};
 	};
 
 	cpuintc: cpuintc {
+		compatible = "mti,cpu-interrupt-controller";
+
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
+
 		interrupt-controller;
-		compatible = "mti,cpu-interrupt-controller";
 	};
 
 	mmc_fixed_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "mmc_power";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
+
 		enable-active-high;
+
 		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "mmc_power";
 	};
 
 	mmc_fixed_1v8_io: regulator-1v8 {
 		compatible = "regulator-fixed";
-		regulator-name = "mmc_io";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
+
 		enable-active-high;
+
 		regulator-always-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "mmc_io";
 	};
 
+	pinctrl: pinctrl {
+		compatible = "ralink,mt7621-pinctrl";
+
+		i2c_pins: i2c0-pins {
+			pinmux {
+				groups = "i2c";
+				function = "i2c";
+			};
+		};
+
+		mdio_pins: mdio0-pins {
+			pinmux {
+				groups = "mdio";
+				function = "mdio";
+			};
+		};
+
+		nand_pins: nand0-pins {
+			sdhci-pinmux {
+				groups = "sdhci";
+				function = "nand2";
+			};
+
+			spi-pinmux {
+				groups = "spi";
+				function = "nand1";
+			};
+		};
+
+		pcie_pins: pcie0-pins {
+			pinmux {
+				groups = "pcie";
+				function = "gpio";
+			};
+		};
+
+		rgmii1_pins: rgmii1-pins {
+			pinmux {
+				groups = "rgmii1";
+				function = "rgmii1";
+			};
+		};
+
+		rgmii2_pins: rgmii2-pins {
+			pinmux {
+				groups = "rgmii2";
+				function = "rgmii2";
+			};
+		};
+
+		sdhci_pins: sdhci0-pins {
+			pinmux {
+				groups = "sdhci";
+				function = "sdhci";
+			};
+		};
+
+		spi_pins: spi0-pins {
+			pinmux {
+				groups = "spi";
+				function = "spi";
+			};
+		};
+
+		uart1_pins: uart1-pins {
+			pinmux {
+				groups = "uart1";
+				function = "uart1";
+			};
+		};
+
+		uart2_pins: uart2-pins {
+			pinmux {
+				groups = "uart2";
+				function = "uart2";
+			};
+		};
+
+		uart3_pins: uart3-pins {
+			pinmux {
+				groups = "uart3";
+				function = "uart3";
+			};
+		};
+	};
+
 	palmbus: palmbus@1e000000 {
 		compatible = "palmbus";
 		reg = <0x1e000000 0x100000>;
@@ -62,12 +155,15 @@
 		sysc: syscon@0 {
 			compatible = "mediatek,mt7621-sysc", "syscon";
 			reg = <0x0 0x100>;
+
 			#clock-cells = <1>;
 			#reset-cells = <1>;
-			ralink,memctl = <&memc>;
+
 			clock-output-names = "xtal", "cpu", "bus",
 					     "50m", "125m", "150m",
 					     "250m", "270m";
+
+			ralink,memctl = <&memc>;
 		};
 
 		wdt: watchdog@100 {
@@ -77,13 +173,16 @@
 		};
 
 		gpio: gpio@600 {
+			compatible = "mediatek,mt7621-gpio";
+			reg = <0x600 0x100>;
+
 			#gpio-cells = <2>;
 			#interrupt-cells = <2>;
-			compatible = "mediatek,mt7621-gpio";
+
 			gpio-controller;
 			gpio-ranges = <&pinctrl 0 0 95>;
+
 			interrupt-controller;
-			reg = <0x600 0x100>;
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SHARED 12 IRQ_TYPE_LEVEL_HIGH>;
 		};
@@ -92,18 +191,19 @@
 			compatible = "mediatek,mt7621-i2c";
 			reg = <0x900 0x100>;
 
-			clocks = <&sysc MT7621_CLK_I2C>;
-			clock-names = "i2c";
-			resets = <&sysc MT7621_RST_I2C>;
-			reset-names = "i2c";
-
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			status = "disabled";
+			clocks = <&sysc MT7621_CLK_I2C>;
+			clock-names = "i2c";
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&i2c_pins>;
+
+			resets = <&sysc MT7621_RST_I2C>;
+			reset-names = "i2c";
+
+			status = "disabled";
 		};
 
 		memc: memory-controller@5000 {
@@ -170,135 +270,53 @@
 		};
 
 		spi0: spi@b00 {
-			status = "disabled";
-
 			compatible = "ralink,mt7621-spi";
 			reg = <0xb00 0x100>;
 
-			clocks = <&sysc MT7621_CLK_SPI>;
-			clock-names = "spi";
-
-			resets = <&sysc MT7621_RST_SPI>;
-			reset-names = "spi";
-
 			#address-cells = <1>;
 			#size-cells = <0>;
 
+			clock-names = "spi";
+			clocks = <&sysc MT7621_CLK_SPI>;
+
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi_pins>;
-		};
-	};
-
-	pinctrl: pinctrl {
-		compatible = "ralink,mt7621-pinctrl";
-
-		i2c_pins: i2c0-pins {
-			pinmux {
-				groups = "i2c";
-				function = "i2c";
-			};
-		};
-
-		spi_pins: spi0-pins {
-			pinmux {
-				groups = "spi";
-				function = "spi";
-			};
-		};
-
-		uart1_pins: uart1-pins {
-			pinmux {
-				groups = "uart1";
-				function = "uart1";
-			};
-		};
-
-		uart2_pins: uart2-pins {
-			pinmux {
-				groups = "uart2";
-				function = "uart2";
-			};
-		};
-
-		uart3_pins: uart3-pins {
-			pinmux {
-				groups = "uart3";
-				function = "uart3";
-			};
-		};
-
-		rgmii1_pins: rgmii1-pins {
-			pinmux {
-				groups = "rgmii1";
-				function = "rgmii1";
-			};
-		};
-
-		rgmii2_pins: rgmii2-pins {
-			pinmux {
-				groups = "rgmii2";
-				function = "rgmii2";
-			};
-		};
-
-		mdio_pins: mdio0-pins {
-			pinmux {
-				groups = "mdio";
-				function = "mdio";
-			};
-		};
-
-		pcie_pins: pcie0-pins {
-			pinmux {
-				groups = "pcie";
-				function = "gpio";
-			};
-		};
-
-		nand_pins: nand0-pins {
-			spi-pinmux {
-				groups = "spi";
-				function = "nand1";
-			};
 
-			sdhci-pinmux {
-				groups = "sdhci";
-				function = "nand2";
-			};
-		};
+			reset-names = "spi";
+			resets = <&sysc MT7621_RST_SPI>;
 
-		sdhci_pins: sdhci0-pins {
-			pinmux {
-				groups = "sdhci";
-				function = "sdhci";
-			};
+			status = "disabled";
 		};
 	};
 
 	mmc: mmc@1e130000 {
-		status = "disabled";
-
 		compatible = "mediatek,mt7620-mmc";
 		reg = <0x1e130000 0x4000>;
 
 		bus-width = <4>;
-		max-frequency = <48000000>;
-		cap-sd-highspeed;
-		cap-mmc-highspeed;
-		vmmc-supply = <&mmc_fixed_3v3>;
-		vqmmc-supply = <&mmc_fixed_1v8_io>;
-		disable-wp;
 
-		pinctrl-names = "default", "state_uhs";
-		pinctrl-0 = <&sdhci_pins>;
-		pinctrl-1 = <&sdhci_pins>;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
 
 		clocks = <&sysc MT7621_CLK_SHXC>,
 			 <&sysc MT7621_CLK_50M>;
 		clock-names = "source", "hclk";
 
+		disable-wp;
+
 		interrupt-parent = <&gic>;
 		interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
+
+		max-frequency = <48000000>;
+
+		pinctrl-names = "default", "state_uhs";
+		pinctrl-0 = <&sdhci_pins>;
+		pinctrl-1 = <&sdhci_pins>;
+
+		vmmc-supply = <&mmc_fixed_3v3>;
+		vqmmc-supply = <&mmc_fixed_1v8_io>;
+
+		status = "disabled";
 	};
 
 	usb: usb@1e1c0000 {
@@ -321,15 +339,15 @@
 		compatible = "mti,gic";
 		reg = <0x1fbc0000 0x2000>;
 
-		interrupt-controller;
 		#interrupt-cells = <3>;
+		interrupt-controller;
 
 		mti,reserved-cpu-vectors = <7>;
 
 		timer {
 			compatible = "mti,gic-timer";
-			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
 			clocks = <&sysc MT7621_CLK_CPU>;
+			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
 		};
 	};
 
@@ -347,46 +365,22 @@
 		compatible = "mediatek,mt7621-eth";
 		reg = <0x1e100000 0x10000>;
 
-		clocks = <&sysc MT7621_CLK_FE>, <&sysc MT7621_CLK_ETH>;
-		clock-names = "fe", "ethif";
-
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		resets = <&sysc MT7621_RST_FE>, <&sysc MT7621_RST_ETH>;
-		reset-names = "fe", "eth";
+		clock-names = "fe", "ethif";
+		clocks = <&sysc MT7621_CLK_FE>, <&sysc MT7621_CLK_ETH>;
 
 		interrupt-parent = <&gic>;
 		interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
 
-		mediatek,ethsys = <&sysc>;
-
 		pinctrl-names = "default";
 		pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>, <&rgmii2_pins>;
 
-		gmac0: mac@0 {
-			compatible = "mediatek,eth-mac";
-			reg = <0>;
-			phy-mode = "trgmii";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-				pause;
-			};
-		};
-
-		gmac1: mac@1 {
-			compatible = "mediatek,eth-mac";
-			reg = <1>;
-			phy-mode = "rgmii";
+		reset-names = "fe", "eth";
+		resets = <&sysc MT7621_RST_FE>, <&sysc MT7621_RST_ETH>;
 
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-				pause;
-			};
-		};
+		mediatek,ethsys = <&sysc>;
 
 		mdio: mdio-bus {
 			#address-cells = <1>;
@@ -395,73 +389,105 @@
 			switch0: switch@1f {
 				compatible = "mediatek,mt7621";
 				reg = <0x1f>;
-				mediatek,mcm;
-				resets = <&sysc MT7621_RST_MCM>;
-				reset-names = "mcm";
-				interrupt-controller;
+
 				#interrupt-cells = <1>;
+				interrupt-controller;
 				interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
 
+				reset-names = "mcm";
+				resets = <&sysc MT7621_RST_MCM>;
+
+				mediatek,mcm;
+
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
 					port@0 {
-						status = "disabled";
 						reg = <0>;
 						label = "swp0";
+						status = "disabled";
 					};
 
 					port@1 {
-						status = "disabled";
 						reg = <1>;
 						label = "swp1";
+						status = "disabled";
 					};
 
 					port@2 {
-						status = "disabled";
 						reg = <2>;
 						label = "swp2";
+						status = "disabled";
 					};
 
 					port@3 {
-						status = "disabled";
 						reg = <3>;
 						label = "swp3";
+						status = "disabled";
 					};
 
 					port@4 {
-						status = "disabled";
 						reg = <4>;
 						label = "swp4";
+						status = "disabled";
 					};
 
 					port@5 {
 						reg = <5>;
+
 						ethernet = <&gmac1>;
 						phy-mode = "rgmii";
 
 						fixed-link {
-							speed = <1000>;
 							full-duplex;
 							pause;
+							speed = <1000>;
 						};
 					};
 
 					port@6 {
 						reg = <6>;
+
 						ethernet = <&gmac0>;
 						phy-mode = "trgmii";
 
 						fixed-link {
-							speed = <1000>;
 							full-duplex;
 							pause;
+							speed = <1000>;
 						};
 					};
 				};
 			};
 		};
+
+		gmac0: mac@0 {
+			compatible = "mediatek,eth-mac";
+			reg = <0>;
+
+			phy-mode = "trgmii";
+
+			fixed-link {
+				full-duplex;
+				pause;
+				speed = <1000>;
+			};
+		};
+
+		gmac1: mac@1 {
+			compatible = "mediatek,eth-mac";
+			reg = <1>;
+
+			phy-mode = "rgmii";
+
+			fixed-link {
+				full-duplex;
+				pause;
+				speed = <1000>;
+			};
+		};
+
 	};
 
 	pcie: pcie@1e140000 {
@@ -470,84 +496,106 @@
 		      <0x1e142000 0x100>, /* pcie port 0 RC control registers */
 		      <0x1e143000 0x100>, /* pcie port 1 RC control registers */
 		      <0x1e144000 0x100>; /* pcie port 2 RC control registers */
+		ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>, /* pci memory */
+			 <0x01000000 0 0x00000000 0x1e160000 0 0x00010000>; /* io space */
+
 		#address-cells = <3>;
+		#interrupt-cells = <1>;
 		#size-cells = <2>;
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&pcie_pins>;
-
 		device_type = "pci";
 
-		ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>, /* pci memory */
-			 <0x01000000 0 0x00000000 0x1e160000 0 0x00010000>; /* io space */
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0xF800 0 0 0>;
-		interrupt-map = <0x0000 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
+		interrupt-map-mask = <0xf800 0 0 0>;
+		interrupt-map = <0x0000 0 0 0 &gic GIC_SHARED  4 IRQ_TYPE_LEVEL_HIGH>,
 				<0x0800 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
 				<0x1000 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
 
-		status = "disabled";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pins>;
 
 		reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
 
+		status = "disabled";
+
 		pcie@0,0 {
 			reg = <0x0000 0 0 0 0>;
+			ranges;
+
 			#address-cells = <3>;
+			#interrupt-cells = <1>;
 			#size-cells = <2>;
+
+			clocks = <&sysc MT7621_CLK_PCIE0>;
+
 			device_type = "pci";
-			#interrupt-cells = <1>;
+
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&sysc MT7621_RST_PCIE0>;
-			clocks = <&sysc MT7621_CLK_PCIE0>;
-			phys = <&pcie0_phy 1>;
+
 			phy-names = "pcie-phy0";
-			ranges;
+			phys = <&pcie0_phy 1>;
+
+			resets = <&sysc MT7621_RST_PCIE0>;
 		};
 
 		pcie@1,0 {
 			reg = <0x0800 0 0 0 0>;
+			ranges;
+
 			#address-cells = <3>;
+			#interrupt-cells = <1>;
 			#size-cells = <2>;
+
+			clocks = <&sysc MT7621_CLK_PCIE1>;
+
 			device_type = "pci";
-			#interrupt-cells = <1>;
+
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&sysc MT7621_RST_PCIE1>;
-			clocks = <&sysc MT7621_CLK_PCIE1>;
-			phys = <&pcie0_phy 1>;
+
 			phy-names = "pcie-phy1";
-			ranges;
+			phys = <&pcie0_phy 1>;
+
+			resets = <&sysc MT7621_RST_PCIE1>;
 		};
 
 		pcie@2,0 {
 			reg = <0x1000 0 0 0 0>;
+			ranges;
+
 			#address-cells = <3>;
+			#interrupt-cells = <1>;
 			#size-cells = <2>;
+
+			clocks = <&sysc MT7621_CLK_PCIE2>;
+
 			device_type = "pci";
-			#interrupt-cells = <1>;
+
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&sysc MT7621_RST_PCIE2>;
-			clocks = <&sysc MT7621_CLK_PCIE2>;
-			phys = <&pcie2_phy 0>;
+
 			phy-names = "pcie-phy2";
-			ranges;
+			phys = <&pcie2_phy 0>;
+
+			resets = <&sysc MT7621_RST_PCIE2>;
 		};
 	};
 
 	pcie0_phy: pcie-phy@1e149000 {
 		compatible = "mediatek,mt7621-pci-phy";
 		reg = <0x1e149000 0x0700>;
-		clocks = <&sysc MT7621_CLK_XTAL>;
+
 		#phy-cells = <1>;
+
+		clocks = <&sysc MT7621_CLK_XTAL>;
 	};
 
 	pcie2_phy: pcie-phy@1e14a000 {
 		compatible = "mediatek,mt7621-pci-phy";
 		reg = <0x1e14a000 0x0700>;
-		clocks = <&sysc MT7621_CLK_XTAL>;
+
 		#phy-cells = <1>;
+
+		clocks = <&sysc MT7621_CLK_XTAL>;
 	};
 };

diff --git a/src/powerpc/acadia.dts b/src/powerpc/acadia.dts
index deb52e4..5fedda8 100644
--- a/src/powerpc/acadia.dts
+++ b/src/powerpc/acadia.dts

@@ -172,7 +172,7 @@
 				reg = <0xef602800 0x60>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x4 0x4>;
-				/* This thing is a bit weird.  It has it's own UIC
+				/* This thing is a bit weird.  It has its own UIC
 				 * that it uses to generate snapshot triggers.  We
 				 * don't really support this device yet, and it needs
 				 * work to figure this out.

diff --git a/src/powerpc/fsl/b4si-post.dtsi b/src/powerpc/fsl/b4si-post.dtsi
index 4f044b4..fb3200b 100644
--- a/src/powerpc/fsl/b4si-post.dtsi
+++ b/src/powerpc/fsl/b4si-post.dtsi

@@ -50,7 +50,7 @@
 &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
-	compatible = "fsl,ifc", "simple-bus";
+	compatible = "fsl,ifc";
 	interrupts = <25 2 0 0>;
 };
 

diff --git a/src/powerpc/fsl/bsc9131rdb.dts b/src/powerpc/fsl/bsc9131rdb.dts
index 8da9842..0ba86a6 100644
--- a/src/powerpc/fsl/bsc9131rdb.dts
+++ b/src/powerpc/fsl/bsc9131rdb.dts

@@ -15,7 +15,7 @@
 		device_type = "memory";
 	};
 
-	board_ifc: ifc: ifc@ff71e000 {
+	board_ifc: ifc: memory-controller@ff71e000 {
 		/* NAND Flash on board */
 		ranges = <0x0 0x0 0x0 0xff800000 0x00004000>;
 		reg = <0x0 0xff71e000 0x0 0x2000>;

diff --git a/src/powerpc/fsl/bsc9131si-post.dtsi b/src/powerpc/fsl/bsc9131si-post.dtsi
index 2a677fd..5c53cee 100644
--- a/src/powerpc/fsl/bsc9131si-post.dtsi
+++ b/src/powerpc/fsl/bsc9131si-post.dtsi

@@ -35,7 +35,7 @@
 &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
-	compatible = "fsl,ifc", "simple-bus";
+	compatible = "fsl,ifc";
 	interrupts = <16 2 0 0 20 2 0 0>;
 };
 

diff --git a/src/powerpc/fsl/bsc9132qds.dts b/src/powerpc/fsl/bsc9132qds.dts
index 7cb2158..ce642e8 100644
--- a/src/powerpc/fsl/bsc9132qds.dts
+++ b/src/powerpc/fsl/bsc9132qds.dts

@@ -15,7 +15,7 @@
 		device_type = "memory";
 	};
 
-	ifc: ifc@ff71e000 {
+	ifc: memory-controller@ff71e000 {
 		/* NOR, NAND Flash on board */
 		ranges = <0x0 0x0 0x0 0x88000000 0x08000000
 			  0x1 0x0 0x0 0xff800000 0x00010000>;

diff --git a/src/powerpc/fsl/bsc9132si-post.dtsi b/src/powerpc/fsl/bsc9132si-post.dtsi
index b8e0edd..4da451e 100644
--- a/src/powerpc/fsl/bsc9132si-post.dtsi
+++ b/src/powerpc/fsl/bsc9132si-post.dtsi

@@ -35,7 +35,7 @@
 &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
-	compatible = "fsl,ifc", "simple-bus";
+	compatible = "fsl,ifc";
 	/* FIXME: Test whether interrupts are split */
 	interrupts = <16 2 0 0 20 2 0 0>;
 };

diff --git a/src/powerpc/fsl/c293pcie.dts b/src/powerpc/fsl/c293pcie.dts
index 5e905e0..e2fdac2 100644
--- a/src/powerpc/fsl/c293pcie.dts
+++ b/src/powerpc/fsl/c293pcie.dts

@@ -42,7 +42,7 @@
 		device_type = "memory";
 	};
 
-	ifc: ifc@fffe1e000 {
+	ifc: memory-controller@fffe1e000 {
 		reg = <0xf 0xffe1e000 0 0x2000>;
 		ranges = <0x0 0x0 0xf 0xec000000 0x04000000
 			  0x1 0x0 0xf 0xff800000 0x00010000

diff --git a/src/powerpc/fsl/c293si-post.dtsi b/src/powerpc/fsl/c293si-post.dtsi
index f208fb8..2d443d5 100644
--- a/src/powerpc/fsl/c293si-post.dtsi
+++ b/src/powerpc/fsl/c293si-post.dtsi

@@ -35,7 +35,7 @@
 &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
-	compatible = "fsl,ifc", "simple-bus";
+	compatible = "fsl,ifc";
 	interrupts = <19 2 0 0>;
 };
 

diff --git a/src/powerpc/fsl/mpc8536si-post.dtsi b/src/powerpc/fsl/mpc8536si-post.dtsi
index 4193570..fba40a1 100644
--- a/src/powerpc/fsl/mpc8536si-post.dtsi
+++ b/src/powerpc/fsl/mpc8536si-post.dtsi

@@ -199,6 +199,10 @@
 
 /include/ "pq3-dma-0.dtsi"
 /include/ "pq3-etsec1-0.dtsi"
+	enet0: ethernet@24000 {
+		fsl,wake-on-filer;
+		fsl,pmc-handle = <&etsec1_clk>;
+	};
 /include/ "pq3-etsec1-timer-0.dtsi"
 
 	usb@22000 {
@@ -222,9 +226,10 @@
 	};
 
 /include/ "pq3-etsec1-2.dtsi"
-
-	ethernet@26000 {
+	enet2: ethernet@26000 {
 		cell-index = <1>;
+		fsl,wake-on-filer;
+		fsl,pmc-handle = <&etsec3_clk>;
 	};
 
 	usb@2b000 {
@@ -249,4 +254,9 @@
 		reg = <0xe0000 0x1000>;
 		fsl,has-rstcr;
 	};
+
+/include/ "pq3-power.dtsi"
+	power@e0070 {
+		compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
+	};
 };

diff --git a/src/powerpc/fsl/mpc8544si-post.dtsi b/src/powerpc/fsl/mpc8544si-post.dtsi
index b68eb11..ea7416af 100644
--- a/src/powerpc/fsl/mpc8544si-post.dtsi
+++ b/src/powerpc/fsl/mpc8544si-post.dtsi

@@ -188,4 +188,6 @@
 		reg = <0xe0000 0x1000>;
 		fsl,has-rstcr;
 	};
+
+/include/ "pq3-power.dtsi"
 };

diff --git a/src/powerpc/fsl/mpc8548si-post.dtsi b/src/powerpc/fsl/mpc8548si-post.dtsi
index 579d76c..dddb737 100644
--- a/src/powerpc/fsl/mpc8548si-post.dtsi
+++ b/src/powerpc/fsl/mpc8548si-post.dtsi

@@ -156,4 +156,6 @@
 		reg = <0xe0000 0x1000>;
 		fsl,has-rstcr;
 	};
+
+/include/ "pq3-power.dtsi"
 };

diff --git a/src/powerpc/fsl/mpc8572si-post.dtsi b/src/powerpc/fsl/mpc8572si-post.dtsi
index 49294cf..40a6cff 100644
--- a/src/powerpc/fsl/mpc8572si-post.dtsi
+++ b/src/powerpc/fsl/mpc8572si-post.dtsi

@@ -193,4 +193,6 @@
 		reg = <0xe0000 0x1000>;
 		fsl,has-rstcr;
 	};
+
+/include/ "pq3-power.dtsi"
 };

diff --git a/src/powerpc/fsl/p1010rdb-pb.dts b/src/powerpc/fsl/p1010rdb-pb.dts
index 3a94acb..ce3346d 100644
--- a/src/powerpc/fsl/p1010rdb-pb.dts
+++ b/src/powerpc/fsl/p1010rdb-pb.dts

@@ -29,3 +29,19 @@
 };
 
 /include/ "p1010si-post.dtsi"
+
+&pci0 {
+	pcie@0 {
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			/*
+			 *irq[4:5] are active-high
+			 *irq[6:7] are active-low
+			 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};

diff --git a/src/powerpc/fsl/p1010rdb-pb_36b.dts b/src/powerpc/fsl/p1010rdb-pb_36b.dts
index 4cf255f..8359035 100644
--- a/src/powerpc/fsl/p1010rdb-pb_36b.dts
+++ b/src/powerpc/fsl/p1010rdb-pb_36b.dts

@@ -56,3 +56,19 @@
 };
 
 /include/ "p1010si-post.dtsi"
+
+&pci0 {
+	pcie@0 {
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			/*
+			 *irq[4:5] are active-high
+			 *irq[6:7] are active-low
+			 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};

diff --git a/src/powerpc/fsl/p1010rdb.dtsi b/src/powerpc/fsl/p1010rdb.dtsi
index 2ca9cee..ef49a7d 100644
--- a/src/powerpc/fsl/p1010rdb.dtsi
+++ b/src/powerpc/fsl/p1010rdb.dtsi

@@ -215,19 +215,3 @@
 		phy-connection-type = "sgmii";
 	};
 };
-
-&pci0 {
-	pcie@0 {
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			/*
-			 *irq[4:5] are active-high
-			 *irq[6:7] are active-low
-			 */
-			0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
-			>;
-	};
-};

diff --git a/src/powerpc/fsl/p1010rdb_32b.dtsi b/src/powerpc/fsl/p1010rdb_32b.dtsi
index fdc19aa..583a6cd 100644
--- a/src/powerpc/fsl/p1010rdb_32b.dtsi
+++ b/src/powerpc/fsl/p1010rdb_32b.dtsi

@@ -36,7 +36,7 @@
 	device_type = "memory";
 };
 
-board_ifc: ifc: ifc@ffe1e000 {
+board_ifc: ifc: memory-controller@ffe1e000 {
 	/* NOR, NAND Flashes and CPLD on board */
 	ranges = <0x0 0x0 0x0 0xee000000 0x02000000
 		  0x1 0x0 0x0 0xff800000 0x00010000

diff --git a/src/powerpc/fsl/p1010rdb_36b.dtsi b/src/powerpc/fsl/p1010rdb_36b.dtsi
index de2fcee..4d41efe 100644
--- a/src/powerpc/fsl/p1010rdb_36b.dtsi
+++ b/src/powerpc/fsl/p1010rdb_36b.dtsi

@@ -36,7 +36,7 @@
 	device_type = "memory";
 };
 
-board_ifc: ifc: ifc@fffe1e000 {
+board_ifc: ifc: memory-controller@fffe1e000 {
 	/* NOR, NAND Flashes and CPLD on board */
 	ranges = <0x0 0x0 0xf 0xee000000 0x02000000
 		  0x1 0x0 0xf 0xff800000 0x00010000

diff --git a/src/powerpc/fsl/p1010si-post.dtsi b/src/powerpc/fsl/p1010si-post.dtsi
index ccda0a9..2d25507 100644
--- a/src/powerpc/fsl/p1010si-post.dtsi
+++ b/src/powerpc/fsl/p1010si-post.dtsi

@@ -35,7 +35,7 @@
 &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
-	compatible = "fsl,ifc", "simple-bus";
+	compatible = "fsl,ifc";
 	interrupts = <16 2 0 0 19 2 0 0>;
 };
 
@@ -183,9 +183,23 @@
 /include/ "pq3-etsec2-1.dtsi"
 /include/ "pq3-etsec2-2.dtsi"
 
+	enet0: ethernet@b0000 {
+		fsl,pmc-handle = <&etsec1_clk>;
+	};
+
+	enet1: ethernet@b1000 {
+		fsl,pmc-handle = <&etsec2_clk>;
+	};
+
+	enet2: ethernet@b2000 {
+		fsl,pmc-handle = <&etsec3_clk>;
+	};
+
 	global-utilities@e0000 {
 		compatible = "fsl,p1010-guts";
 		reg = <0xe0000 0x1000>;
 		fsl,has-rstcr;
 	};
+
+/include/ "pq3-power.dtsi"
 };

diff --git a/src/powerpc/fsl/p1020si-post.dtsi b/src/powerpc/fsl/p1020si-post.dtsi
index 642dc3a..cc4c746 100644
--- a/src/powerpc/fsl/p1020si-post.dtsi
+++ b/src/powerpc/fsl/p1020si-post.dtsi

@@ -163,14 +163,17 @@
 
 /include/ "pq3-etsec2-0.dtsi"
 	enet0: enet0_grp2: ethernet@b0000 {
+		fsl,pmc-handle = <&etsec1_clk>;
 	};
 
 /include/ "pq3-etsec2-1.dtsi"
 	enet1: enet1_grp2: ethernet@b1000 {
+		fsl,pmc-handle = <&etsec2_clk>;
 	};
 
 /include/ "pq3-etsec2-2.dtsi"
 	enet2: enet2_grp2: ethernet@b2000 {
+		fsl,pmc-handle = <&etsec3_clk>;
 	};
 
 	global-utilities@e0000 {
@@ -178,6 +181,8 @@
 		reg = <0xe0000 0x1000>;
 		fsl,has-rstcr;
 	};
+
+/include/ "pq3-power.dtsi"
 };
 
 /include/ "pq3-etsec2-grp2-0.dtsi"

diff --git a/src/powerpc/fsl/p1021si-post.dtsi b/src/powerpc/fsl/p1021si-post.dtsi
index 407cb5f..378195d 100644
--- a/src/powerpc/fsl/p1021si-post.dtsi
+++ b/src/powerpc/fsl/p1021si-post.dtsi

@@ -159,14 +159,17 @@
 
 /include/ "pq3-etsec2-0.dtsi"
 	enet0: enet0_grp2: ethernet@b0000 {
+		fsl,pmc-handle = <&etsec1_clk>;
 	};
 
 /include/ "pq3-etsec2-1.dtsi"
 	enet1: enet1_grp2: ethernet@b1000 {
+		fsl,pmc-handle = <&etsec2_clk>;
 	};
 
 /include/ "pq3-etsec2-2.dtsi"
 	enet2: enet2_grp2: ethernet@b2000 {
+		fsl,pmc-handle = <&etsec3_clk>;
 	};
 
 	global-utilities@e0000 {
@@ -174,6 +177,8 @@
 		reg = <0xe0000 0x1000>;
 		fsl,has-rstcr;
 	};
+
+/include/ "pq3-power.dtsi"
 };
 
 &qe {

diff --git a/src/powerpc/fsl/p1022si-post.dtsi b/src/powerpc/fsl/p1022si-post.dtsi
index 093e4e3..6ac21e8 100644
--- a/src/powerpc/fsl/p1022si-post.dtsi
+++ b/src/powerpc/fsl/p1022si-post.dtsi

@@ -225,11 +225,13 @@
 /include/ "pq3-etsec2-0.dtsi"
 	enet0: enet0_grp2: ethernet@b0000 {
 		fsl,wake-on-filer;
+		fsl,pmc-handle = <&etsec1_clk>;
 	};
 
 /include/ "pq3-etsec2-1.dtsi"
 	enet1: enet1_grp2: ethernet@b1000 {
 		fsl,wake-on-filer;
+		fsl,pmc-handle = <&etsec2_clk>;
 	};
 
 	global-utilities@e0000 {
@@ -238,9 +240,10 @@
 		fsl,has-rstcr;
 	};
 
+/include/ "pq3-power.dtsi"
 	power@e0070 {
-		compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
-		reg = <0xe0070 0x20>;
+		compatible = "fsl,p1022-pmc", "fsl,mpc8536-pmc",
+				"fsl,mpc8548-pmc";
 	};
 
 };

diff --git a/src/powerpc/fsl/p2020si-post.dtsi b/src/powerpc/fsl/p2020si-post.dtsi
index 81b9ab2..d410082 100644
--- a/src/powerpc/fsl/p2020si-post.dtsi
+++ b/src/powerpc/fsl/p2020si-post.dtsi

@@ -178,6 +178,10 @@
 		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
 	};
 /include/ "pq3-etsec1-0.dtsi"
+	enet0: ethernet@24000 {
+		fsl,pmc-handle = <&etsec1_clk>;
+
+	};
 /include/ "pq3-etsec1-timer-0.dtsi"
 
 	ptp_clock@24e00 {
@@ -186,7 +190,15 @@
 
 
 /include/ "pq3-etsec1-1.dtsi"
+	enet1: ethernet@25000 {
+		fsl,pmc-handle = <&etsec2_clk>;
+	};
+
 /include/ "pq3-etsec1-2.dtsi"
+	enet2: ethernet@26000 {
+		fsl,pmc-handle = <&etsec3_clk>;
+	};
+
 /include/ "pq3-esdhc-0.dtsi"
 	sdhc@2e000 {
 		compatible = "fsl,p2020-esdhc", "fsl,esdhc";
@@ -202,8 +214,5 @@
 		fsl,has-rstcr;
 	};
 
-	pmc: power@e0070 {
-		compatible = "fsl,mpc8548-pmc";
-		reg = <0xe0070 0x20>;
-	};
+/include/ "pq3-power.dtsi"
 };

diff --git a/src/powerpc/fsl/pq3-power.dtsi b/src/powerpc/fsl/pq3-power.dtsi
new file mode 100644
index 0000000..6af1240
--- /dev/null
+++ b/src/powerpc/fsl/pq3-power.dtsi

@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+)
+/*
+ * Copyright 2024 NXP
+ */
+
+power@e0070 {
+	compatible = "fsl,mpc8548-pmc";
+	reg = <0xe0070 0x20>;
+
+	etsec1_clk: soc-clk@24 {
+		fsl,pmcdr-mask = <0x00000080>;
+	};
+	etsec2_clk: soc-clk@25 {
+		fsl,pmcdr-mask = <0x00000040>;
+	};
+	etsec3_clk: soc-clk@26 {
+		fsl,pmcdr-mask = <0x00000020>;
+	};
+};

diff --git a/src/powerpc/fsl/t1023si-post.dtsi b/src/powerpc/fsl/t1023si-post.dtsi
index aa5152c..8ef0c02 100644
--- a/src/powerpc/fsl/t1023si-post.dtsi
+++ b/src/powerpc/fsl/t1023si-post.dtsi

@@ -52,7 +52,7 @@
 &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
-	compatible = "fsl,ifc", "simple-bus";
+	compatible = "fsl,ifc";
 	interrupts = <25 2 0 0>;
 };
 

diff --git a/src/powerpc/fsl/t1024rdb.dts b/src/powerpc/fsl/t1024rdb.dts
index 270aaf6..7d003e0 100644
--- a/src/powerpc/fsl/t1024rdb.dts
+++ b/src/powerpc/fsl/t1024rdb.dts

@@ -91,7 +91,7 @@
 		board-control@2,0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "fsl,t1024-cpld";
+			compatible = "fsl,t1024-cpld", "fsl,deepsleep-cpld";
 			reg = <3 0 0x300>;
 			ranges = <0 3 0 0x300>;
 			bank-width = <1>;

diff --git a/src/powerpc/fsl/t1040rdb.dts b/src/powerpc/fsl/t1040rdb.dts
index dd3aab8..4347924 100644
--- a/src/powerpc/fsl/t1040rdb.dts
+++ b/src/powerpc/fsl/t1040rdb.dts

@@ -104,7 +104,7 @@
 
 	ifc: localbus@ffe124000 {
 		cpld@3,0 {
-			compatible = "fsl,t1040rdb-cpld";
+			compatible = "fsl,t104xrdb-cpld", "fsl,deepsleep-cpld";
 		};
 	};
 };

diff --git a/src/powerpc/fsl/t1040si-post.dtsi b/src/powerpc/fsl/t1040si-post.dtsi
index 7767886..c9542b7 100644
--- a/src/powerpc/fsl/t1040si-post.dtsi
+++ b/src/powerpc/fsl/t1040si-post.dtsi

@@ -52,7 +52,7 @@
 &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
-	compatible = "fsl,ifc", "simple-bus";
+	compatible = "fsl,ifc";
 	interrupts = <25 2 0 0>;
 };
 

diff --git a/src/powerpc/fsl/t1042rdb.dts b/src/powerpc/fsl/t1042rdb.dts
index 3ebb712..0997643 100644
--- a/src/powerpc/fsl/t1042rdb.dts
+++ b/src/powerpc/fsl/t1042rdb.dts

@@ -68,7 +68,7 @@
 
 	ifc: localbus@ffe124000 {
 		cpld@3,0 {
-			compatible = "fsl,t1042rdb-cpld";
+			compatible = "fsl,t104xrdb-cpld", "fsl,deepsleep-cpld";
 		};
 	};
 };

diff --git a/src/powerpc/fsl/t1042rdb_pi.dts b/src/powerpc/fsl/t1042rdb_pi.dts
index 8ec3ff4..b10cab1 100644
--- a/src/powerpc/fsl/t1042rdb_pi.dts
+++ b/src/powerpc/fsl/t1042rdb_pi.dts

@@ -41,7 +41,7 @@
 
 	ifc: localbus@ffe124000 {
 		cpld@3,0 {
-			compatible = "fsl,t1042rdb_pi-cpld";
+			compatible = "fsl,t104xrdb-cpld", "fsl,deepsleep-cpld";
 		};
 	};
 

diff --git a/src/powerpc/fsl/t2081si-post.dtsi b/src/powerpc/fsl/t2081si-post.dtsi
index 27714dc..6bb9587 100644
--- a/src/powerpc/fsl/t2081si-post.dtsi
+++ b/src/powerpc/fsl/t2081si-post.dtsi

@@ -50,7 +50,7 @@
 &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
-	compatible = "fsl,ifc", "simple-bus";
+	compatible = "fsl,ifc";
 	interrupts = <25 2 0 0>;
 };
 

diff --git a/src/powerpc/fsl/t4240si-post.dtsi b/src/powerpc/fsl/t4240si-post.dtsi
index fcac734..65f3e17 100644
--- a/src/powerpc/fsl/t4240si-post.dtsi
+++ b/src/powerpc/fsl/t4240si-post.dtsi

@@ -50,7 +50,7 @@
 &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
-	compatible = "fsl,ifc", "simple-bus";
+	compatible = "fsl,ifc";
 	interrupts = <25 2 0 0>;
 };
 

diff --git a/src/riscv/canaan/canaan_kd233.dts b/src/riscv/canaan/canaan_kd233.dts
index 8df4cf3..a7d753b 100644
--- a/src/riscv/canaan/canaan_kd233.dts
+++ b/src/riscv/canaan/canaan_kd233.dts

@@ -15,6 +15,10 @@
 	model = "Kendryte KD233";
 	compatible = "canaan,kendryte-kd233", "canaan,kendryte-k210";
 
+	aliases {
+		serial0 = &uarths0;
+	};
+
 	chosen {
 		bootargs = "earlycon console=ttySIF0";
 		stdout-path = "serial0:115200n8";
@@ -46,7 +50,6 @@
 &fpioa {
 	pinctrl-0 = <&jtag_pinctrl>;
 	pinctrl-names = "default";
-	status = "okay";
 
 	jtag_pinctrl: jtag-pinmux {
 		pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
@@ -118,6 +121,7 @@
 	#sound-dai-cells = <1>;
 	pinctrl-0 = <&i2s0_pinctrl>;
 	pinctrl-names = "default";
+	status = "okay";
 };
 
 &spi0 {
@@ -125,6 +129,7 @@
 	pinctrl-names = "default";
 	num-cs = <1>;
 	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+	status = "okay";
 
 	panel@0 {
 		compatible = "canaan,kd233-tft", "ilitek,ili9341";

diff --git a/src/riscv/canaan/k210.dtsi b/src/riscv/canaan/k210.dtsi
index f87c516..4f5d40f 100644
--- a/src/riscv/canaan/k210.dtsi
+++ b/src/riscv/canaan/k210.dtsi

@@ -16,13 +16,6 @@
 	#size-cells = <1>;
 	compatible = "canaan,kendryte-k210";
 
-	aliases {
-		serial0 = &uarths0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
 	/*
 	 * The K210 has an sv39 MMU following the privileged specification v1.9.
 	 * Since this is a non-ratified draft specification, the kernel does not
@@ -137,6 +130,7 @@
 			reg = <0x38000000 0x1000>;
 			interrupts = <33>;
 			clocks = <&sysclk K210_CLK_CPU>;
+			status = "disabled";
 		};
 
 		gpio0: gpio-controller@38001000 {
@@ -152,6 +146,7 @@
 				     <62>, <63>, <64>, <65>;
 			gpio-controller;
 			ngpios = <32>;
+			status = "disabled";
 		};
 
 		dmac0: dma-controller@50000000 {
@@ -187,6 +182,7 @@
 					 <&sysclk K210_CLK_GPIO>;
 				clock-names = "bus", "db";
 				resets = <&sysrst K210_RST_GPIO>;
+				status = "disabled";
 
 				gpio1_0: gpio-port@0 {
 					#gpio-cells = <2>;
@@ -214,6 +210,7 @@
 				dsr-override;
 				cts-override;
 				ri-override;
+				status = "disabled";
 			};
 
 			uart2: serial@50220000 {
@@ -230,6 +227,7 @@
 				dsr-override;
 				cts-override;
 				ri-override;
+				status = "disabled";
 			};
 
 			uart3: serial@50230000 {
@@ -246,6 +244,7 @@
 				dsr-override;
 				cts-override;
 				ri-override;
+				status = "disabled";
 			};
 
 			spi2: spi@50240000 {
@@ -259,6 +258,7 @@
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "ssi_clk", "pclk";
 				resets = <&sysrst K210_RST_SPI2>;
+				status = "disabled";
 			};
 
 			i2s0: i2s@50250000 {
@@ -268,6 +268,7 @@
 				clocks = <&sysclk K210_CLK_I2S0>;
 				clock-names = "i2sclk";
 				resets = <&sysrst K210_RST_I2S0>;
+				status = "disabled";
 			};
 
 			i2s1: i2s@50260000 {
@@ -277,6 +278,7 @@
 				clocks = <&sysclk K210_CLK_I2S1>;
 				clock-names = "i2sclk";
 				resets = <&sysrst K210_RST_I2S1>;
+				status = "disabled";
 			};
 
 			i2s2: i2s@50270000 {
@@ -286,6 +288,7 @@
 				clocks = <&sysclk K210_CLK_I2S2>;
 				clock-names = "i2sclk";
 				resets = <&sysrst K210_RST_I2S2>;
+				status = "disabled";
 			};
 
 			i2c0: i2c@50280000 {
@@ -296,6 +299,7 @@
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "ref", "pclk";
 				resets = <&sysrst K210_RST_I2C0>;
+				status = "disabled";
 			};
 
 			i2c1: i2c@50290000 {
@@ -306,6 +310,7 @@
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "ref", "pclk";
 				resets = <&sysrst K210_RST_I2C1>;
+				status = "disabled";
 			};
 
 			i2c2: i2c@502a0000 {
@@ -316,6 +321,7 @@
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "ref", "pclk";
 				resets = <&sysrst K210_RST_I2C2>;
+				status = "disabled";
 			};
 
 			fpioa: pinmux@502b0000 {
@@ -464,6 +470,7 @@
 				reset-names = "spi";
 				num-cs = <4>;
 				reg-io-width = <4>;
+				status = "disabled";
 			};
 
 			spi1: spi@53000000 {
@@ -479,6 +486,7 @@
 				reset-names = "spi";
 				num-cs = <4>;
 				reg-io-width = <4>;
+				status = "disabled";
 			};
 
 			spi3: spi@54000000 {
@@ -495,6 +503,7 @@
 
 				num-cs = <4>;
 				reg-io-width = <4>;
+				status = "disabled";
 			};
 		};
 	};

diff --git a/src/riscv/canaan/k210_generic.dts b/src/riscv/canaan/k210_generic.dts
index 396c8ca..5734cc0 100644
--- a/src/riscv/canaan/k210_generic.dts
+++ b/src/riscv/canaan/k210_generic.dts

@@ -15,6 +15,10 @@
 	model = "Kendryte K210 generic";
 	compatible = "canaan,kendryte-k210";
 
+	aliases {
+		serial0 = &uarths0;
+	};
+
 	chosen {
 		bootargs = "earlycon console=ttySIF0";
 		stdout-path = "serial0:115200n8";
@@ -24,7 +28,6 @@
 &fpioa {
 	pinctrl-0 = <&jtag_pins>;
 	pinctrl-names = "default";
-	status = "okay";
 
 	jtag_pins: jtag-pinmux {
 		pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,

diff --git a/src/riscv/canaan/sipeed_maix_bit.dts b/src/riscv/canaan/sipeed_maix_bit.dts
index 6d25bf0..2ab376d 100644
--- a/src/riscv/canaan/sipeed_maix_bit.dts
+++ b/src/riscv/canaan/sipeed_maix_bit.dts

@@ -17,6 +17,10 @@
 	compatible = "sipeed,maix-bit", "sipeed,maix-bitm",
 		     "canaan,kendryte-k210";
 
+	aliases {
+		serial0 = &uarths0;
+	};
+
 	chosen {
 		bootargs = "earlycon console=ttySIF0";
 		stdout-path = "serial0:115200n8";
@@ -58,7 +62,6 @@
 &fpioa {
 	pinctrl-names = "default";
 	pinctrl-0 = <&jtag_pinctrl>;
-	status = "okay";
 
 	jtag_pinctrl: jtag-pinmux {
 		pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
@@ -156,6 +159,7 @@
 	#sound-dai-cells = <1>;
 	pinctrl-0 = <&i2s0_pinctrl>;
 	pinctrl-names = "default";
+	status = "okay";
 };
 
 &i2c1 {
@@ -170,6 +174,7 @@
 	pinctrl-names = "default";
 	num-cs = <1>;
 	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+	status = "okay";
 
 	panel@0 {
 		compatible = "sitronix,st7789v";
@@ -199,6 +204,8 @@
 };
 
 &spi3 {
+	status = "okay";
+
 	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;

diff --git a/src/riscv/canaan/sipeed_maix_dock.dts b/src/riscv/canaan/sipeed_maix_dock.dts
index f4f4d8d..d98e207 100644
--- a/src/riscv/canaan/sipeed_maix_dock.dts
+++ b/src/riscv/canaan/sipeed_maix_dock.dts

@@ -17,6 +17,10 @@
 	compatible = "sipeed,maix-dock-m1", "sipeed,maix-dock-m1w",
 		     "canaan,kendryte-k210";
 
+	aliases {
+		serial0 = &uarths0;
+	};
+
 	chosen {
 		bootargs = "earlycon console=ttySIF0";
 		stdout-path = "serial0:115200n8";
@@ -63,7 +67,6 @@
 &fpioa {
 	pinctrl-0 = <&jtag_pinctrl>;
 	pinctrl-names = "default";
-	status = "okay";
 
 	jtag_pinctrl: jtag-pinmux {
 		pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
@@ -159,6 +162,7 @@
 	#sound-dai-cells = <1>;
 	pinctrl-0 = <&i2s0_pinctrl>;
 	pinctrl-names = "default";
+	status = "okay";
 };
 
 &i2c1 {
@@ -173,6 +177,7 @@
 	pinctrl-names = "default";
 	num-cs = <1>;
 	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+	status = "okay";
 
 	panel@0 {
 		compatible = "sitronix,st7789v";

diff --git a/src/riscv/canaan/sipeed_maix_go.dts b/src/riscv/canaan/sipeed_maix_go.dts
index 0d86df4..79ecd54 100644
--- a/src/riscv/canaan/sipeed_maix_go.dts
+++ b/src/riscv/canaan/sipeed_maix_go.dts

@@ -16,6 +16,10 @@
 	model = "SiPeed MAIX GO";
 	compatible = "sipeed,maix-go", "canaan,kendryte-k210";
 
+	aliases {
+		serial0 = &uarths0;
+	};
+
 	chosen {
 		bootargs = "earlycon console=ttySIF0";
 		stdout-path = "serial0:115200n8";
@@ -69,7 +73,6 @@
 &fpioa {
 	pinctrl-0 = <&jtag_pinctrl>;
 	pinctrl-names = "default";
-	status = "okay";
 
 	jtag_pinctrl: jtag-pinmux {
 		pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
@@ -167,6 +170,7 @@
 	#sound-dai-cells = <1>;
 	pinctrl-0 = <&i2s0_pinctrl>;
 	pinctrl-names = "default";
+	status = "okay";
 };
 
 &i2c1 {
@@ -181,6 +185,7 @@
 	pinctrl-names = "default";
 	num-cs = <1>;
 	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+	status = "okay";
 
 	panel@0 {
 		compatible = "sitronix,st7789v";
@@ -209,6 +214,8 @@
 };
 
 &spi3 {
+	status = "okay";
+
 	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;

diff --git a/src/riscv/canaan/sipeed_maixduino.dts b/src/riscv/canaan/sipeed_maixduino.dts
index 5c05c49..019c03a 100644
--- a/src/riscv/canaan/sipeed_maixduino.dts
+++ b/src/riscv/canaan/sipeed_maixduino.dts

@@ -15,6 +15,10 @@
 	model = "SiPeed MAIXDUINO";
 	compatible = "sipeed,maixduino", "canaan,kendryte-k210";
 
+	aliases {
+		serial0 = &uarths0;
+	};
+
 	chosen {
 		bootargs = "earlycon console=ttySIF0";
 		stdout-path = "serial0:115200n8";
@@ -39,8 +43,6 @@
 };
 
 &fpioa {
-	status = "okay";
-
 	uarths_pinctrl: uarths-pinmux {
 		pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>, /* Header "0" */
 			 <K210_FPIOA(5, K210_PCF_UARTHS_TX)>; /* Header "1" */
@@ -132,6 +134,7 @@
 	#sound-dai-cells = <1>;
 	pinctrl-0 = <&i2s0_pinctrl>;
 	pinctrl-names = "default";
+	status = "okay";
 };
 
 &i2c1 {
@@ -146,6 +149,7 @@
 	pinctrl-names = "default";
 	num-cs = <1>;
 	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+	status = "okay";
 
 	panel@0 {
 		compatible = "sitronix,st7789v";
@@ -174,6 +178,8 @@
 };
 
 &spi3 {
+	status = "okay";
+
 	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;

diff --git a/src/riscv/microchip/mpfs-icicle-kit.dts b/src/riscv/microchip/mpfs-icicle-kit.dts
index 222a39d..f80df22 100644
--- a/src/riscv/microchip/mpfs-icicle-kit.dts
+++ b/src/riscv/microchip/mpfs-icicle-kit.dts

@@ -100,6 +100,38 @@
 
 &i2c1 {
 	status = "okay";
+
+	power-monitor@10 {
+		compatible = "microchip,pac1934";
+		reg = <0x10>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <0x1>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "VDDREG";
+		};
+
+		channel@2 {
+			reg = <0x2>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "VDDA25";
+		};
+
+		channel@3 {
+			reg = <0x3>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "VDD25";
+		};
+
+		channel@4 {
+			reg = <0x4>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "VDDA_REG";
+		};
+	};
 };
 
 &i2c2 {

diff --git a/src/riscv/renesas/r9a07g043f.dtsi b/src/riscv/renesas/r9a07g043f.dtsi
index f35324b..e0ddf8f 100644
--- a/src/riscv/renesas/r9a07g043f.dtsi
+++ b/src/riscv/renesas/r9a07g043f.dtsi

@@ -54,6 +54,81 @@
 	dma-noncoherent;
 	interrupt-parent = <&plic>;
 
+	irqc: interrupt-controller@110a0000 {
+		compatible = "renesas,r9a07g043f-irqc";
+		reg = <0 0x110a0000 0 0x20000>;
+		#interrupt-cells = <2>;
+		#address-cells = <0>;
+		interrupt-controller;
+		interrupts = <32 IRQ_TYPE_LEVEL_HIGH>,
+			     <33 IRQ_TYPE_LEVEL_HIGH>,
+			     <34 IRQ_TYPE_LEVEL_HIGH>,
+			     <35 IRQ_TYPE_LEVEL_HIGH>,
+			     <36 IRQ_TYPE_LEVEL_HIGH>,
+			     <37 IRQ_TYPE_LEVEL_HIGH>,
+			     <38 IRQ_TYPE_LEVEL_HIGH>,
+			     <39 IRQ_TYPE_LEVEL_HIGH>,
+			     <40 IRQ_TYPE_LEVEL_HIGH>,
+			     <476 IRQ_TYPE_LEVEL_HIGH>,
+			     <477 IRQ_TYPE_LEVEL_HIGH>,
+			     <478 IRQ_TYPE_LEVEL_HIGH>,
+			     <479 IRQ_TYPE_LEVEL_HIGH>,
+			     <480 IRQ_TYPE_LEVEL_HIGH>,
+			     <481 IRQ_TYPE_LEVEL_HIGH>,
+			     <482 IRQ_TYPE_LEVEL_HIGH>,
+			     <483 IRQ_TYPE_LEVEL_HIGH>,
+			     <484 IRQ_TYPE_LEVEL_HIGH>,
+			     <485 IRQ_TYPE_LEVEL_HIGH>,
+			     <486 IRQ_TYPE_LEVEL_HIGH>,
+			     <487 IRQ_TYPE_LEVEL_HIGH>,
+			     <488 IRQ_TYPE_LEVEL_HIGH>,
+			     <489 IRQ_TYPE_LEVEL_HIGH>,
+			     <490 IRQ_TYPE_LEVEL_HIGH>,
+			     <491 IRQ_TYPE_LEVEL_HIGH>,
+			     <492 IRQ_TYPE_LEVEL_HIGH>,
+			     <493 IRQ_TYPE_LEVEL_HIGH>,
+			     <494 IRQ_TYPE_LEVEL_HIGH>,
+			     <495 IRQ_TYPE_LEVEL_HIGH>,
+			     <496 IRQ_TYPE_LEVEL_HIGH>,
+			     <497 IRQ_TYPE_LEVEL_HIGH>,
+			     <498 IRQ_TYPE_LEVEL_HIGH>,
+			     <499 IRQ_TYPE_LEVEL_HIGH>,
+			     <500 IRQ_TYPE_LEVEL_HIGH>,
+			     <501 IRQ_TYPE_LEVEL_HIGH>,
+			     <502 IRQ_TYPE_LEVEL_HIGH>,
+			     <503 IRQ_TYPE_LEVEL_HIGH>,
+			     <504 IRQ_TYPE_LEVEL_HIGH>,
+			     <505 IRQ_TYPE_LEVEL_HIGH>,
+			     <506 IRQ_TYPE_LEVEL_HIGH>,
+			     <507 IRQ_TYPE_LEVEL_HIGH>,
+			     <57 IRQ_TYPE_LEVEL_HIGH>,
+			     <66 IRQ_TYPE_EDGE_RISING>,
+			     <67 IRQ_TYPE_EDGE_RISING>,
+			     <68 IRQ_TYPE_EDGE_RISING>,
+			     <69 IRQ_TYPE_EDGE_RISING>,
+			     <70 IRQ_TYPE_EDGE_RISING>,
+			     <71 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "nmi",
+				  "irq0", "irq1", "irq2", "irq3",
+				  "irq4", "irq5", "irq6", "irq7",
+				  "tint0", "tint1", "tint2", "tint3",
+				  "tint4", "tint5", "tint6", "tint7",
+				  "tint8", "tint9", "tint10", "tint11",
+				  "tint12", "tint13", "tint14", "tint15",
+				  "tint16", "tint17", "tint18", "tint19",
+				  "tint20", "tint21", "tint22", "tint23",
+				  "tint24", "tint25", "tint26", "tint27",
+				  "tint28", "tint29", "tint30", "tint31",
+				  "bus-err", "ec7tie1-0", "ec7tie2-0",
+				  "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1",
+				  "ec7tiovf-1";
+		clocks = <&cpg CPG_MOD R9A07G043_IAX45_CLK>,
+			 <&cpg CPG_MOD R9A07G043_IAX45_PCLK>;
+		clock-names = "clk", "pclk";
+		power-domains = <&cpg>;
+		resets = <&cpg R9A07G043_IAX45_RESETN>;
+	};
+
 	plic: interrupt-controller@12c00000 {
 		compatible = "renesas,r9a07g043-plic", "andestech,nceplic100";
 		#interrupt-cells = <2>;

diff --git a/src/riscv/renesas/rzfive-smarc-som.dtsi b/src/riscv/renesas/rzfive-smarc-som.dtsi
index 433ab5c..5e80824 100644
--- a/src/riscv/renesas/rzfive-smarc-som.dtsi
+++ b/src/riscv/renesas/rzfive-smarc-som.dtsi

@@ -6,19 +6,3 @@
  */
 
 #include <arm64/renesas/rzg2ul-smarc-som.dtsi>
-
-#if (!SW_ET0_EN_N)
-&eth0 {
-	phy0: ethernet-phy@7 {
-		/delete-property/ interrupt-parent;
-		/delete-property/ interrupts;
-	};
-};
-#endif
-
-&eth1 {
-	phy1: ethernet-phy@7 {
-		/delete-property/ interrupt-parent;
-		/delete-property/ interrupts;
-	};
-};

diff --git a/src/riscv/sophgo/cv1800b-milkv-duo.dts b/src/riscv/sophgo/cv1800b-milkv-duo.dts
index 3af9e34..375ff26 100644
--- a/src/riscv/sophgo/cv1800b-milkv-duo.dts
+++ b/src/riscv/sophgo/cv1800b-milkv-duo.dts

@@ -23,9 +23,15 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x3f40000>;
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		coprocessor_rtos: region@83f40000 {
+			reg = <0x83f40000 0xc0000>;
+			no-map;
+		};
 	};
 };
 
@@ -33,6 +39,15 @@
 	clock-frequency = <25000000>;
 };
 
+&sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	disable-wp;
+};
+
 &uart0 {
 	status = "okay";
 };

diff --git a/src/riscv/sophgo/cv1800b.dtsi b/src/riscv/sophgo/cv1800b.dtsi
index 165e9e3..ec95309 100644
--- a/src/riscv/sophgo/cv1800b.dtsi
+++ b/src/riscv/sophgo/cv1800b.dtsi

@@ -7,6 +7,11 @@
 
 / {
 	compatible = "sophgo,cv1800b";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x4000000>;
+	};
 };
 
 &plic {
@@ -16,3 +21,7 @@
 &clint {
 	compatible = "sophgo,cv1800b-clint", "thead,c900-clint";
 };
+
+&clk {
+	compatible = "sophgo,cv1800-clk";
+};

diff --git a/src/riscv/sophgo/cv1812h.dtsi b/src/riscv/sophgo/cv1812h.dtsi
index 3e7a942..7fa4c1e 100644
--- a/src/riscv/sophgo/cv1812h.dtsi
+++ b/src/riscv/sophgo/cv1812h.dtsi

@@ -22,3 +22,7 @@
 &clint {
 	compatible = "sophgo,cv1812h-clint", "thead,c900-clint";
 };
+
+&clk {
+	compatible = "sophgo,cv1810-clk";
+};

diff --git a/src/riscv/sophgo/cv18xx.dtsi b/src/riscv/sophgo/cv18xx.dtsi
index 2d6f4a4..891932a 100644
--- a/src/riscv/sophgo/cv18xx.dtsi
+++ b/src/riscv/sophgo/cv18xx.dtsi

@@ -4,6 +4,8 @@
  * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com>
  */
 
+#include <dt-bindings/clock/sophgo,cv1800.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -53,6 +55,12 @@
 		dma-noncoherent;
 		ranges;
 
+		clk: clock-controller@3002000 {
+			reg = <0x03002000 0x1000>;
+			clocks = <&osc>;
+			#clock-cells = <1>;
+		};
+
 		gpio0: gpio@3020000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = <0x3020000 0x1000>;
@@ -125,11 +133,67 @@
 			};
 		};
 
+		i2c0: i2c@4000000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x04000000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C0>;
+			clock-names = "ref", "pclk";
+			interrupts = <49 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@4010000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x04010000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C1>;
+			clock-names = "ref", "pclk";
+			interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@4020000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x04020000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C2>;
+			clock-names = "ref", "pclk";
+			interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@4030000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x04030000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C3>;
+			clock-names = "ref", "pclk";
+			interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@4040000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x04040000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C4>;
+			clock-names = "ref", "pclk";
+			interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		uart0: serial@4140000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x04140000 0x100>;
 			interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
+			clocks = <&clk CLK_UART0>, <&clk CLK_APB_UART0>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -139,7 +203,8 @@
 			compatible = "snps,dw-apb-uart";
 			reg = <0x04150000 0x100>;
 			interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
+			clocks = <&clk CLK_UART1>, <&clk CLK_APB_UART1>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -149,7 +214,8 @@
 			compatible = "snps,dw-apb-uart";
 			reg = <0x04160000 0x100>;
 			interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
+			clocks = <&clk CLK_UART2>, <&clk CLK_APB_UART2>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -159,22 +225,78 @@
 			compatible = "snps,dw-apb-uart";
 			reg = <0x04170000 0x100>;
 			interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
+			clocks = <&clk CLK_UART3>, <&clk CLK_APB_UART3>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
 		};
 
+		spi0: spi@4180000 {
+			compatible = "snps,dw-apb-ssi";
+			reg = <0x04180000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI0>;
+			clock-names = "ssi_clk", "pclk";
+			interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		spi1: spi@4190000 {
+			compatible = "snps,dw-apb-ssi";
+			reg = <0x04190000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI1>;
+			clock-names = "ssi_clk", "pclk";
+			interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		spi2: spi@41a0000 {
+			compatible = "snps,dw-apb-ssi";
+			reg = <0x041a0000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI2>;
+			clock-names = "ssi_clk", "pclk";
+			interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		spi3: spi@41b0000 {
+			compatible = "snps,dw-apb-ssi";
+			reg = <0x041b0000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI3>;
+			clock-names = "ssi_clk", "pclk";
+			interrupts = <57 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		uart4: serial@41c0000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x041c0000 0x100>;
 			interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
+			clocks = <&clk CLK_UART4>, <&clk CLK_APB_UART4>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
 		};
 
+		sdhci0: mmc@4310000 {
+			compatible = "sophgo,cv1800b-dwcmshc";
+			reg = <0x4310000 0x1000>;
+			interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk CLK_AXI4_SD0>,
+				 <&clk CLK_SD0>;
+			clock-names = "core", "bus";
+			status = "disabled";
+		};
+
 		plic: interrupt-controller@70000000 {
 			reg = <0x70000000 0x4000000>;
 			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;

diff --git a/src/riscv/starfive/jh7100.dtsi b/src/riscv/starfive/jh7100.dtsi
index 9a2e958..7de0732 100644
--- a/src/riscv/starfive/jh7100.dtsi
+++ b/src/riscv/starfive/jh7100.dtsi

@@ -13,7 +13,7 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	cpus {
+	cpus: cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 

diff --git a/src/riscv/starfive/jh7110-common.dtsi b/src/riscv/starfive/jh7110-common.dtsi
new file mode 100644
index 0000000..68d1671
--- /dev/null
+++ b/src/riscv/starfive/jh7110-common.dtsi

@@ -0,0 +1,599 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include "jh7110.dtsi"
+#include "jh7110-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		ethernet0 = &gmac0;
+		i2c0 = &i2c0;
+		i2c2 = &i2c2;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x1 0x0>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>;
+		priority = <224>;
+	};
+
+	pwmdac_codec: audio-codec {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "StarFive-PWMDAC-Sound-Card";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			format = "left_j";
+			bitclock-master = <&sndcpu0>;
+			frame-master = <&sndcpu0>;
+
+			sndcpu0: cpu {
+				sound-dai = <&pwmdac>;
+			};
+
+			codec {
+				sound-dai = <&pwmdac_codec>;
+			};
+		};
+	};
+};
+
+&cpus {
+	timebase-frequency = <4000000>;
+};
+
+&dvp_clk {
+	clock-frequency = <74250000>;
+};
+
+&gmac0_rgmii_rxin {
+	clock-frequency = <125000000>;
+};
+
+&gmac0_rmii_refin {
+	clock-frequency = <50000000>;
+};
+
+&gmac1_rgmii_rxin {
+	clock-frequency = <125000000>;
+};
+
+&gmac1_rmii_refin {
+	clock-frequency = <50000000>;
+};
+
+&hdmitx0_pixelclk {
+	clock-frequency = <297000000>;
+};
+
+&i2srx_bclk_ext {
+	clock-frequency = <12288000>;
+};
+
+&i2srx_lrck_ext {
+	clock-frequency = <192000>;
+};
+
+&i2stx_bclk_ext {
+	clock-frequency = <12288000>;
+};
+
+&i2stx_lrck_ext {
+	clock-frequency = <192000>;
+};
+
+&mclk_ext {
+	clock-frequency = <12288000>;
+};
+
+&osc {
+	clock-frequency = <24000000>;
+};
+
+&rtc_osc {
+	clock-frequency = <32768>;
+};
+
+&tdm_ext {
+	clock-frequency = <49152000>;
+};
+
+&camss {
+	assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
+			  <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
+	assigned-clock-rates = <49500000>, <198000000>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+		};
+
+		port@1 {
+			reg = <1>;
+
+			camss_from_csi2rx: endpoint {
+				remote-endpoint = <&csi2rx_to_camss>;
+			};
+		};
+	};
+};
+
+&csi2rx {
+	assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
+	assigned-clock-rates = <297000000>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			/* remote MIPI sensor endpoint */
+		};
+
+		port@1 {
+			reg = <1>;
+
+			csi2rx_to_camss: endpoint {
+				remote-endpoint = <&camss_from_csi2rx>;
+			};
+		};
+	};
+};
+
+&gmac0 {
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <510>;
+	i2c-scl-falling-time-ns = <510>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <510>;
+	i2c-scl-falling-time-ns = <510>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
+&i2c5 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <510>;
+	i2c-scl-falling-time-ns = <510>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	status = "okay";
+
+	axp15060: pmic@36 {
+		compatible = "x-powers,axp15060";
+		reg = <0x36>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		regulators {
+			vcc_3v3: dcdc1 {
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3";
+			};
+
+			vdd_cpu: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1540000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			emmc_vdd: aldo4 {
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "emmc_vdd";
+			};
+		};
+	};
+};
+
+&i2c6 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <510>;
+	i2c-scl-falling-time-ns = <510>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	status = "okay";
+};
+
+&mmc0 {
+	max-frequency = <100000000>;
+	assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
+	assigned-clock-rates = <50000000>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	cap-mmc-hw-reset;
+	post-power-on-delay-ms = <200>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&emmc_vdd>;
+	status = "okay";
+};
+
+&mmc1 {
+	max-frequency = <100000000>;
+	assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>;
+	assigned-clock-rates = <50000000>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	cap-sd-highspeed;
+	post-power-on-delay-ms = <200>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	status = "okay";
+};
+
+&pwmdac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwmdac_pins>;
+	status = "okay";
+};
+
+&qspi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	nor_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		cdns,read-delay = <5>;
+		spi-max-frequency = <12000000>;
+		cdns,tshsl-ns = <1>;
+		cdns,tsd2d-ns = <1>;
+		cdns,tchsh-ns = <1>;
+		cdns,tslch-ns = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			spl@0 {
+				reg = <0x0 0x80000>;
+			};
+			uboot-env@f0000 {
+				reg = <0xf0000 0x10000>;
+			};
+			uboot@100000 {
+				reg = <0x100000 0x400000>;
+			};
+			reserved-data@600000 {
+				reg = <0x600000 0xa00000>;
+			};
+		};
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	spi_dev0: spi@0 {
+		compatible = "rohm,dh2228fv";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&sysgpio {
+	i2c0_pins: i2c0-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(57, GPOUT_LOW,
+					      GPOEN_SYS_I2C0_CLK,
+					      GPI_SYS_I2C0_CLK)>,
+				 <GPIOMUX(58, GPOUT_LOW,
+					      GPOEN_SYS_I2C0_DATA,
+					      GPI_SYS_I2C0_DATA)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	i2c2_pins: i2c2-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(3, GPOUT_LOW,
+					     GPOEN_SYS_I2C2_CLK,
+					     GPI_SYS_I2C2_CLK)>,
+				 <GPIOMUX(2, GPOUT_LOW,
+					     GPOEN_SYS_I2C2_DATA,
+					     GPI_SYS_I2C2_DATA)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	i2c5_pins: i2c5-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(19, GPOUT_LOW,
+					      GPOEN_SYS_I2C5_CLK,
+					      GPI_SYS_I2C5_CLK)>,
+				 <GPIOMUX(20, GPOUT_LOW,
+					      GPOEN_SYS_I2C5_DATA,
+					      GPI_SYS_I2C5_DATA)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	i2c6_pins: i2c6-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(16, GPOUT_LOW,
+					      GPOEN_SYS_I2C6_CLK,
+					      GPI_SYS_I2C6_CLK)>,
+				 <GPIOMUX(17, GPOUT_LOW,
+					      GPOEN_SYS_I2C6_DATA,
+					      GPI_SYS_I2C6_DATA)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	mmc0_pins: mmc0-0 {
+		 rst-pins {
+			pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			bias-pull-up;
+			drive-strength = <12>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		mmc-pins {
+			pinmux = <PINMUX(64, 0)>,
+				 <PINMUX(65, 0)>,
+				 <PINMUX(66, 0)>,
+				 <PINMUX(67, 0)>,
+				 <PINMUX(68, 0)>,
+				 <PINMUX(69, 0)>,
+				 <PINMUX(70, 0)>,
+				 <PINMUX(71, 0)>,
+				 <PINMUX(72, 0)>,
+				 <PINMUX(73, 0)>;
+			bias-pull-up;
+			drive-strength = <12>;
+			input-enable;
+		};
+	};
+
+	mmc1_pins: mmc1-0 {
+		clk-pins {
+			pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			bias-pull-up;
+			drive-strength = <12>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		mmc-pins {
+			pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD,
+					     GPOEN_SYS_SDIO1_CMD,
+					     GPI_SYS_SDIO1_CMD)>,
+				 <GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0,
+					      GPOEN_SYS_SDIO1_DATA0,
+					      GPI_SYS_SDIO1_DATA0)>,
+				 <GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1,
+					      GPOEN_SYS_SDIO1_DATA1,
+					      GPI_SYS_SDIO1_DATA1)>,
+				 <GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2,
+					     GPOEN_SYS_SDIO1_DATA2,
+					     GPI_SYS_SDIO1_DATA2)>,
+				 <GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3,
+					     GPOEN_SYS_SDIO1_DATA3,
+					     GPI_SYS_SDIO1_DATA3)>;
+			bias-pull-up;
+			drive-strength = <12>;
+			input-enable;
+			input-schmitt-enable;
+			slew-rate = <0>;
+		};
+	};
+
+	pwmdac_pins: pwmdac-0 {
+		pwmdac-pins {
+			pinmux = <GPIOMUX(33, GPOUT_SYS_PWMDAC_LEFT,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>,
+				 <GPIOMUX(34, GPOUT_SYS_PWMDAC_RIGHT,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			bias-disable;
+			drive-strength = <2>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm_pins: pwm-0 {
+		pwm-pins {
+			pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0,
+					      GPOEN_SYS_PWM0_CHANNEL0,
+					      GPI_NONE)>,
+				 <GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1,
+					      GPOEN_SYS_PWM0_CHANNEL1,
+					      GPI_NONE)>;
+			bias-disable;
+			drive-strength = <12>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+
+	spi0_pins: spi0-0 {
+		mosi-pins {
+			pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+
+		miso-pins {
+			pinmux = <GPIOMUX(53, GPOUT_LOW,
+					      GPOEN_DISABLE,
+					      GPI_SYS_SPI0_RXD)>;
+			bias-pull-up;
+			input-enable;
+			input-schmitt-enable;
+		};
+
+		sck-pins {
+			pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK,
+					      GPOEN_ENABLE,
+					      GPI_SYS_SPI0_CLK)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+
+		ss-pins {
+			pinmux = <GPIOMUX(49, GPOUT_SYS_SPI0_FSS,
+					      GPOEN_ENABLE,
+					      GPI_SYS_SPI0_FSS)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+	};
+
+	uart0_pins: uart0-0 {
+		tx-pins {
+			pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
+					     GPOEN_ENABLE,
+					     GPI_NONE)>;
+			bias-disable;
+			drive-strength = <12>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		rx-pins {
+			pinmux = <GPIOMUX(6, GPOUT_LOW,
+					     GPOEN_DISABLE,
+					     GPI_SYS_UART0_RX)>;
+			bias-disable; /* external pull-up */
+			drive-strength = <2>;
+			input-enable;
+			input-schmitt-enable;
+			slew-rate = <0>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&U74_1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&U74_2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&U74_3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&U74_4 {
+	cpu-supply = <&vdd_cpu>;
+};

diff --git a/src/riscv/starfive/jh7110-milkv-mars.dts b/src/riscv/starfive/jh7110-milkv-mars.dts
new file mode 100644
index 0000000..fa0eac7
--- /dev/null
+++ b/src/riscv/starfive/jh7110-milkv-mars.dts

@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
+ */
+
+/dts-v1/;
+#include "jh7110-common.dtsi"
+
+/ {
+	model = "Milk-V Mars";
+	compatible = "milkv,mars", "starfive,jh7110";
+};
+
+&gmac0 {
+	starfive,tx-use-rgmii-clk;
+	assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
+	assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
+};
+
+
+&phy0 {
+	motorcomm,tx-clk-adj-enabled;
+	motorcomm,tx-clk-10-inverted;
+	motorcomm,tx-clk-100-inverted;
+	motorcomm,tx-clk-1000-inverted;
+	motorcomm,rx-clk-drv-microamp = <3970>;
+	motorcomm,rx-data-drv-microamp = <2910>;
+	rx-internal-delay-ps = <1500>;
+	tx-internal-delay-ps = <1500>;
+};

diff --git a/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi b/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi
index 45b58b6..9d70f21 100644
--- a/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi

@@ -5,188 +5,11 @@
  */
 
 /dts-v1/;
-#include "jh7110.dtsi"
-#include "jh7110-pinfunc.h"
-#include <dt-bindings/gpio/gpio.h>
+#include "jh7110-common.dtsi"
 
 / {
 	aliases {
-		ethernet0 = &gmac0;
 		ethernet1 = &gmac1;
-		i2c0 = &i2c0;
-		i2c2 = &i2c2;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-		mmc0 = &mmc0;
-		mmc1 = &mmc1;
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	cpus {
-		timebase-frequency = <4000000>;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x0 0x40000000 0x1 0x0>;
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>;
-		priority = <224>;
-	};
-
-	pwmdac_codec: pwmdac-codec {
-		compatible = "linux,spdif-dit";
-		#sound-dai-cells = <0>;
-	};
-
-	sound-pwmdac {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "StarFive-PWMDAC-Sound-Card";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		simple-audio-card,dai-link@0 {
-			reg = <0>;
-			format = "left_j";
-			bitclock-master = <&sndcpu0>;
-			frame-master = <&sndcpu0>;
-
-			sndcpu0: cpu {
-				sound-dai = <&pwmdac>;
-			};
-
-			codec {
-				sound-dai = <&pwmdac_codec>;
-			};
-		};
-	};
-};
-
-&dvp_clk {
-	clock-frequency = <74250000>;
-};
-
-&gmac0_rgmii_rxin {
-	clock-frequency = <125000000>;
-};
-
-&gmac0_rmii_refin {
-	clock-frequency = <50000000>;
-};
-
-&gmac1_rgmii_rxin {
-	clock-frequency = <125000000>;
-};
-
-&gmac1_rmii_refin {
-	clock-frequency = <50000000>;
-};
-
-&hdmitx0_pixelclk {
-	clock-frequency = <297000000>;
-};
-
-&i2srx_bclk_ext {
-	clock-frequency = <12288000>;
-};
-
-&i2srx_lrck_ext {
-	clock-frequency = <192000>;
-};
-
-&i2stx_bclk_ext {
-	clock-frequency = <12288000>;
-};
-
-&i2stx_lrck_ext {
-	clock-frequency = <192000>;
-};
-
-&mclk_ext {
-	clock-frequency = <12288000>;
-};
-
-&osc {
-	clock-frequency = <24000000>;
-};
-
-&rtc_osc {
-	clock-frequency = <32768>;
-};
-
-&tdm_ext {
-	clock-frequency = <49152000>;
-};
-
-&camss {
-	assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
-			  <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
-	assigned-clock-rates = <49500000>, <198000000>;
-	status = "okay";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-		};
-
-		port@1 {
-			reg = <1>;
-
-			camss_from_csi2rx: endpoint {
-				remote-endpoint = <&csi2rx_to_camss>;
-			};
-		};
-	};
-};
-
-&csi2rx {
-	assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
-	assigned-clock-rates = <297000000>;
-	status = "okay";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			/* remote MIPI sensor endpoint */
-		};
-
-		port@1 {
-			reg = <1>;
-
-			csi2rx_to_camss: endpoint {
-				remote-endpoint = <&camss_from_csi2rx>;
-			};
-		};
-	};
-};
-
-&gmac0 {
-	phy-handle = <&phy0>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "snps,dwmac-mdio";
-
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-		};
 	};
 };
 
@@ -206,510 +29,6 @@
 	};
 };
 
-&i2c0 {
-	clock-frequency = <100000>;
-	i2c-sda-hold-time-ns = <300>;
-	i2c-sda-falling-time-ns = <510>;
-	i2c-scl-falling-time-ns = <510>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	i2c-sda-hold-time-ns = <300>;
-	i2c-sda-falling-time-ns = <510>;
-	i2c-scl-falling-time-ns = <510>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-	status = "okay";
-};
-
-&i2c5 {
-	clock-frequency = <100000>;
-	i2c-sda-hold-time-ns = <300>;
-	i2c-sda-falling-time-ns = <510>;
-	i2c-scl-falling-time-ns = <510>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c5_pins>;
-	status = "okay";
-
-	axp15060: pmic@36 {
-		compatible = "x-powers,axp15060";
-		reg = <0x36>;
-		interrupts = <0>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-
-		regulators {
-			vcc_3v3: dcdc1 {
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_3v3";
-			};
-
-			vdd_cpu: dcdc2 {
-				regulator-always-on;
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <1540000>;
-				regulator-name = "vdd-cpu";
-			};
-
-			emmc_vdd: aldo4 {
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "emmc_vdd";
-			};
-		};
-	};
-};
-
-&i2c6 {
-	clock-frequency = <100000>;
-	i2c-sda-hold-time-ns = <300>;
-	i2c-sda-falling-time-ns = <510>;
-	i2c-scl-falling-time-ns = <510>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c6_pins>;
-	status = "okay";
-};
-
-&i2srx {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2srx_pins>;
-	status = "okay";
-};
-
-&i2stx0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mclk_ext_pins>;
-	status = "okay";
-};
-
-&i2stx1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2stx1_pins>;
-	status = "okay";
-};
-
 &mmc0 {
-	max-frequency = <100000000>;
-	assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
-	assigned-clock-rates = <50000000>;
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
 	non-removable;
-	cap-mmc-hw-reset;
-	post-power-on-delay-ms = <200>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&emmc_vdd>;
-	status = "okay";
-};
-
-&mmc1 {
-	max-frequency = <100000000>;
-	assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>;
-	assigned-clock-rates = <50000000>;
-	bus-width = <4>;
-	no-sdio;
-	no-mmc;
-	broken-cd;
-	cap-sd-highspeed;
-	post-power-on-delay-ms = <200>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	status = "okay";
-};
-
-&pwmdac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwmdac_pins>;
-	status = "okay";
-};
-
-&qspi {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	nor_flash: flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		cdns,read-delay = <5>;
-		spi-max-frequency = <12000000>;
-		cdns,tshsl-ns = <1>;
-		cdns,tsd2d-ns = <1>;
-		cdns,tchsh-ns = <1>;
-		cdns,tslch-ns = <1>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			spl@0 {
-				reg = <0x0 0x80000>;
-			};
-			uboot-env@f0000 {
-				reg = <0xf0000 0x10000>;
-			};
-			uboot@100000 {
-				reg = <0x100000 0x400000>;
-			};
-			reserved-data@600000 {
-				reg = <0x600000 0xa00000>;
-			};
-		};
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm_pins>;
-	status = "okay";
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-	status = "okay";
-
-	spi_dev0: spi@0 {
-		compatible = "rohm,dh2228fv";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-	};
-};
-
-&sysgpio {
-	i2c0_pins: i2c0-0 {
-		i2c-pins {
-			pinmux = <GPIOMUX(57, GPOUT_LOW,
-					      GPOEN_SYS_I2C0_CLK,
-					      GPI_SYS_I2C0_CLK)>,
-				 <GPIOMUX(58, GPOUT_LOW,
-					      GPOEN_SYS_I2C0_DATA,
-					      GPI_SYS_I2C0_DATA)>;
-			bias-disable; /* external pull-up */
-			input-enable;
-			input-schmitt-enable;
-		};
-	};
-
-	i2c2_pins: i2c2-0 {
-		i2c-pins {
-			pinmux = <GPIOMUX(3, GPOUT_LOW,
-					     GPOEN_SYS_I2C2_CLK,
-					     GPI_SYS_I2C2_CLK)>,
-				 <GPIOMUX(2, GPOUT_LOW,
-					     GPOEN_SYS_I2C2_DATA,
-					     GPI_SYS_I2C2_DATA)>;
-			bias-disable; /* external pull-up */
-			input-enable;
-			input-schmitt-enable;
-		};
-	};
-
-	i2c5_pins: i2c5-0 {
-		i2c-pins {
-			pinmux = <GPIOMUX(19, GPOUT_LOW,
-					      GPOEN_SYS_I2C5_CLK,
-					      GPI_SYS_I2C5_CLK)>,
-				 <GPIOMUX(20, GPOUT_LOW,
-					      GPOEN_SYS_I2C5_DATA,
-					      GPI_SYS_I2C5_DATA)>;
-			bias-disable; /* external pull-up */
-			input-enable;
-			input-schmitt-enable;
-		};
-	};
-
-	i2c6_pins: i2c6-0 {
-		i2c-pins {
-			pinmux = <GPIOMUX(16, GPOUT_LOW,
-					      GPOEN_SYS_I2C6_CLK,
-					      GPI_SYS_I2C6_CLK)>,
-				 <GPIOMUX(17, GPOUT_LOW,
-					      GPOEN_SYS_I2C6_DATA,
-					      GPI_SYS_I2C6_DATA)>;
-			bias-disable; /* external pull-up */
-			input-enable;
-			input-schmitt-enable;
-		};
-	};
-
-	i2srx_pins: i2srx-0 {
-		clk-sd-pins {
-			pinmux = <GPIOMUX(38, GPOUT_LOW,
-					      GPOEN_DISABLE,
-					      GPI_SYS_I2SRX_BCLK)>,
-				 <GPIOMUX(63, GPOUT_LOW,
-					      GPOEN_DISABLE,
-					      GPI_SYS_I2SRX_LRCK)>,
-				 <GPIOMUX(38, GPOUT_LOW,
-					      GPOEN_DISABLE,
-					      GPI_SYS_I2STX1_BCLK)>,
-				 <GPIOMUX(63, GPOUT_LOW,
-					      GPOEN_DISABLE,
-					      GPI_SYS_I2STX1_LRCK)>,
-				 <GPIOMUX(61, GPOUT_LOW,
-					      GPOEN_DISABLE,
-					      GPI_SYS_I2SRX_SDIN0)>;
-			input-enable;
-		};
-	};
-
-	i2stx1_pins: i2stx1-0 {
-		sd-pins {
-			pinmux = <GPIOMUX(44, GPOUT_SYS_I2STX1_SDO0,
-					      GPOEN_ENABLE,
-					      GPI_NONE)>;
-			bias-disable;
-			input-disable;
-		};
-	};
-
-	mclk_ext_pins: mclk-ext-0 {
-		mclk-ext-pins {
-			pinmux = <GPIOMUX(4, GPOUT_LOW,
-					     GPOEN_DISABLE,
-					     GPI_SYS_MCLK_EXT)>;
-			input-enable;
-		};
-	};
-
-	mmc0_pins: mmc0-0 {
-		 rst-pins {
-			pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
-					      GPOEN_ENABLE,
-					      GPI_NONE)>;
-			bias-pull-up;
-			drive-strength = <12>;
-			input-disable;
-			input-schmitt-disable;
-			slew-rate = <0>;
-		};
-
-		mmc-pins {
-			pinmux = <PINMUX(64, 0)>,
-				 <PINMUX(65, 0)>,
-				 <PINMUX(66, 0)>,
-				 <PINMUX(67, 0)>,
-				 <PINMUX(68, 0)>,
-				 <PINMUX(69, 0)>,
-				 <PINMUX(70, 0)>,
-				 <PINMUX(71, 0)>,
-				 <PINMUX(72, 0)>,
-				 <PINMUX(73, 0)>;
-			bias-pull-up;
-			drive-strength = <12>;
-			input-enable;
-		};
-	};
-
-	mmc1_pins: mmc1-0 {
-		clk-pins {
-			pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK,
-					      GPOEN_ENABLE,
-					      GPI_NONE)>;
-			bias-pull-up;
-			drive-strength = <12>;
-			input-disable;
-			input-schmitt-disable;
-			slew-rate = <0>;
-		};
-
-		mmc-pins {
-			pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD,
-					     GPOEN_SYS_SDIO1_CMD,
-					     GPI_SYS_SDIO1_CMD)>,
-				 <GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0,
-					      GPOEN_SYS_SDIO1_DATA0,
-					      GPI_SYS_SDIO1_DATA0)>,
-				 <GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1,
-					      GPOEN_SYS_SDIO1_DATA1,
-					      GPI_SYS_SDIO1_DATA1)>,
-				 <GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2,
-					     GPOEN_SYS_SDIO1_DATA2,
-					     GPI_SYS_SDIO1_DATA2)>,
-				 <GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3,
-					     GPOEN_SYS_SDIO1_DATA3,
-					     GPI_SYS_SDIO1_DATA3)>;
-			bias-pull-up;
-			drive-strength = <12>;
-			input-enable;
-			input-schmitt-enable;
-			slew-rate = <0>;
-		};
-	};
-
-	pwmdac_pins: pwmdac-0 {
-		pwmdac-pins {
-			pinmux = <GPIOMUX(33, GPOUT_SYS_PWMDAC_LEFT,
-					      GPOEN_ENABLE,
-					      GPI_NONE)>,
-				 <GPIOMUX(34, GPOUT_SYS_PWMDAC_RIGHT,
-					      GPOEN_ENABLE,
-					      GPI_NONE)>;
-			bias-disable;
-			drive-strength = <2>;
-			input-disable;
-			input-schmitt-disable;
-			slew-rate = <0>;
-		};
-	};
-
-	pwm_pins: pwm-0 {
-		pwm-pins {
-			pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0,
-					      GPOEN_SYS_PWM0_CHANNEL0,
-					      GPI_NONE)>,
-				 <GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1,
-					      GPOEN_SYS_PWM0_CHANNEL1,
-					      GPI_NONE)>;
-			bias-disable;
-			drive-strength = <12>;
-			input-disable;
-			input-schmitt-disable;
-			slew-rate = <0>;
-		};
-	};
-
-	spi0_pins: spi0-0 {
-		mosi-pins {
-			pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD,
-					      GPOEN_ENABLE,
-					      GPI_NONE)>;
-			bias-disable;
-			input-disable;
-			input-schmitt-disable;
-		};
-
-		miso-pins {
-			pinmux = <GPIOMUX(53, GPOUT_LOW,
-					      GPOEN_DISABLE,
-					      GPI_SYS_SPI0_RXD)>;
-			bias-pull-up;
-			input-enable;
-			input-schmitt-enable;
-		};
-
-		sck-pins {
-			pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK,
-					      GPOEN_ENABLE,
-					      GPI_SYS_SPI0_CLK)>;
-			bias-disable;
-			input-disable;
-			input-schmitt-disable;
-		};
-
-		ss-pins {
-			pinmux = <GPIOMUX(49, GPOUT_SYS_SPI0_FSS,
-					      GPOEN_ENABLE,
-					      GPI_SYS_SPI0_FSS)>;
-			bias-disable;
-			input-disable;
-			input-schmitt-disable;
-		};
-	};
-
-	tdm_pins: tdm-0 {
-		tx-pins {
-			pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,
-					      GPOEN_ENABLE,
-					      GPI_NONE)>;
-			bias-pull-up;
-			drive-strength = <2>;
-			input-disable;
-			input-schmitt-disable;
-			slew-rate = <0>;
-		};
-
-		rx-pins {
-			pinmux = <GPIOMUX(61, GPOUT_HIGH,
-					      GPOEN_DISABLE,
-					      GPI_SYS_TDM_RXD)>;
-			input-enable;
-		};
-
-		sync-pins {
-			pinmux = <GPIOMUX(63, GPOUT_HIGH,
-					      GPOEN_DISABLE,
-					      GPI_SYS_TDM_SYNC)>;
-			input-enable;
-		};
-
-		pcmclk-pins {
-			pinmux = <GPIOMUX(38, GPOUT_HIGH,
-					      GPOEN_DISABLE,
-					      GPI_SYS_TDM_CLK)>;
-			input-enable;
-		};
-	};
-
-	uart0_pins: uart0-0 {
-		tx-pins {
-			pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
-					     GPOEN_ENABLE,
-					     GPI_NONE)>;
-			bias-disable;
-			drive-strength = <12>;
-			input-disable;
-			input-schmitt-disable;
-			slew-rate = <0>;
-		};
-
-		rx-pins {
-			pinmux = <GPIOMUX(6, GPOUT_LOW,
-					     GPOEN_DISABLE,
-					     GPI_SYS_UART0_RX)>;
-			bias-disable; /* external pull-up */
-			drive-strength = <2>;
-			input-enable;
-			input-schmitt-enable;
-			slew-rate = <0>;
-		};
-	};
-};
-
-&tdm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&tdm_pins>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&usb0 {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&U74_1 {
-	cpu-supply = <&vdd_cpu>;
-};
-
-&U74_2 {
-	cpu-supply = <&vdd_cpu>;
-};
-
-&U74_3 {
-	cpu-supply = <&vdd_cpu>;
-};
-
-&U74_4 {
-	cpu-supply = <&vdd_cpu>;
 };

diff --git a/src/riscv/starfive/jh7110.dtsi b/src/riscv/starfive/jh7110.dtsi
index 4a5708f..1804719 100644
--- a/src/riscv/starfive/jh7110.dtsi
+++ b/src/riscv/starfive/jh7110.dtsi

@@ -15,7 +15,7 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	cpus {
+	cpus: cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 

diff --git a/src/riscv/thead/th1520.dtsi b/src/riscv/thead/th1520.dtsi
index 8b915e2..d2fa258 100644
--- a/src/riscv/thead/th1520.dtsi
+++ b/src/riscv/thead/th1520.dtsi

@@ -193,6 +193,33 @@
 			status = "disabled";
 		};
 
+		emmc: mmc@ffe7080000 {
+			compatible = "thead,th1520-dwcmshc";
+			reg = <0xff 0xe7080000 0x0 0x10000>;
+			interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sdhci_clk>;
+			clock-names = "core";
+			status = "disabled";
+		};
+
+		sdio0: mmc@ffe7090000 {
+			compatible = "thead,th1520-dwcmshc";
+			reg = <0xff 0xe7090000 0x0 0x10000>;
+			interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sdhci_clk>;
+			clock-names = "core";
+			status = "disabled";
+		};
+
+		sdio1: mmc@ffe70a0000 {
+			compatible = "thead,th1520-dwcmshc";
+			reg = <0xff 0xe70a0000 0x0 0x10000>;
+			interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sdhci_clk>;
+			clock-names = "core";
+			status = "disabled";
+		};
+
 		uart1: serial@ffe7f00000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xff 0xe7f00000 0x0 0x100>;
@@ -311,33 +338,6 @@
 			status = "disabled";
 		};
 
-		emmc: mmc@ffe7080000 {
-			compatible = "thead,th1520-dwcmshc";
-			reg = <0xff 0xe7080000 0x0 0x10000>;
-			interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sdhci_clk>;
-			clock-names = "core";
-			status = "disabled";
-		};
-
-		sdio0: mmc@ffe7090000 {
-			compatible = "thead,th1520-dwcmshc";
-			reg = <0xff 0xe7090000 0x0 0x10000>;
-			interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sdhci_clk>;
-			clock-names = "core";
-			status = "disabled";
-		};
-
-		sdio1: mmc@ffe70a0000 {
-			compatible = "thead,th1520-dwcmshc";
-			reg = <0xff 0xe70a0000 0x0 0x10000>;
-			interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sdhci_clk>;
-			clock-names = "core";
-			status = "disabled";
-		};
-
 		timer0: timer@ffefc32000 {
 			compatible = "snps,dw-apb-timer";
 			reg = <0xff 0xefc32000 0x0 0x14>;

diff --git a/src/sh/j2_mimas_v2.dts b/src/sh/j2_mimas_v2.dts
index fa9562f..faf884f 100644
--- a/src/sh/j2_mimas_v2.dts
+++ b/src/sh/j2_mimas_v2.dts

@@ -71,8 +71,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			spi-max-frequency = <25000000>;
-
 			reg = <0x40 0x8>;
 
 			sdcard@0 {
commit	762f85bb2e36762ee4d7395002b8181905aec690	[log] [tgz]
author	Tom Rini <trini@konsulko.com>	Sat Jul 20 11:15:10 2024 -0600
committer	Tom Rini <trini@konsulko.com>	Sat Jul 20 11:15:10 2024 -0600
tree	039d9c51c14b030c63846da2b2563d11dea8808b
parent	6bb92fcf7d2fea2314d616e5e2391a8bf2b0fdfa [diff]