| // SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| /* |
| * Copyright 2023 Toradex |
| * |
| * Common dtsi for Verdin AM62 SoM on Yavia carrier board |
| * |
| * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 |
| * https://www.toradex.com/products/carrier-board/yavia |
| */ |
| |
| #include <dt-bindings/leds/common.h> |
| |
| / { |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_qspi1_clk_gpio>, |
| <&pinctrl_qspi1_cs_gpio>, |
| <&pinctrl_qspi1_io0_gpio>, |
| <&pinctrl_qspi1_io1_gpio>, |
| <&pinctrl_qspi1_io2_gpio>, |
| <&pinctrl_qspi1_io3_gpio>; |
| |
| /* SODIMM 52 - LD1_RED */ |
| led-0 { |
| color = <LED_COLOR_ID_RED>; |
| function = LED_FUNCTION_DEBUG; |
| function-enumerator = <1>; |
| gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>; |
| }; |
| /* SODIMM 54 - LD1_GREEN */ |
| led-1 { |
| color = <LED_COLOR_ID_GREEN>; |
| function = LED_FUNCTION_DEBUG; |
| function-enumerator = <1>; |
| gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>; |
| }; |
| /* SODIMM 56 - LD1_BLUE */ |
| led-2 { |
| color = <LED_COLOR_ID_BLUE>; |
| function = LED_FUNCTION_DEBUG; |
| function-enumerator = <1>; |
| gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>; |
| }; |
| /* SODIMM 58 - LD2_RED */ |
| led-3 { |
| color = <LED_COLOR_ID_RED>; |
| function = LED_FUNCTION_DEBUG; |
| function-enumerator = <2>; |
| gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>; |
| }; |
| /* SODIMM 60 - LD2_GREEN */ |
| led-4 { |
| color = <LED_COLOR_ID_GREEN>; |
| function = LED_FUNCTION_DEBUG; |
| function-enumerator = <2>; |
| gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>; |
| }; |
| /* SODIMM 62 - LD2_BLUE */ |
| led-5 { |
| color = <LED_COLOR_ID_BLUE>; |
| function = LED_FUNCTION_DEBUG; |
| function-enumerator = <2>; |
| gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| }; |
| |
| /* Verdin ETHs */ |
| &cpsw3g { |
| status = "okay"; |
| }; |
| |
| /* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */ |
| &cpsw3g_mdio { |
| status = "okay"; |
| }; |
| |
| /* Verdin ETH_1 (On-module PHY) */ |
| &cpsw_port1 { |
| status = "okay"; |
| }; |
| |
| /* Verdin PWM_1, PWM_2 */ |
| &epwm0 { |
| status = "okay"; |
| }; |
| |
| /* Verdin PWM_3_DSI */ |
| &epwm1 { |
| status = "okay"; |
| }; |
| |
| &main_gpio0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ctrl_sleep_moci>, |
| <&pinctrl_gpio_5>, |
| <&pinctrl_gpio_6>, |
| <&pinctrl_gpio_7>, |
| <&pinctrl_gpio_8>, |
| <&pinctrl_qspi1_cs2_gpio>; |
| }; |
| |
| &main_gpio1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_qspi1_dqs_gpio>; |
| }; |
| |
| /* Verdin I2C_1 */ |
| &main_i2c1 { |
| status = "okay"; |
| |
| /* Temperature sensor */ |
| sensor@4f { |
| compatible = "ti,tmp75c"; |
| reg = <0x4f>; |
| }; |
| |
| /* EEPROM */ |
| eeprom@57 { |
| compatible = "st,24c02"; |
| reg = <0x57>; |
| pagesize = <16>; |
| }; |
| }; |
| |
| /* Verdin I2C_2_DSI */ |
| &main_i2c2 { |
| status = "okay"; |
| }; |
| |
| /* Verdin I2C_4_CSI */ |
| &main_i2c3 { |
| status = "okay"; |
| }; |
| |
| /* Verdin CAN_1 */ |
| &main_mcan0 { |
| status = "okay"; |
| }; |
| |
| /* Verdin SPI_1 */ |
| &main_spi1 { |
| status = "okay"; |
| }; |
| |
| /* Verdin UART_3 */ |
| &main_uart0 { |
| status = "okay"; |
| }; |
| |
| /* Verdin UART_1 */ |
| &main_uart1 { |
| status = "okay"; |
| }; |
| |
| &mcu_gpio0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_1>, |
| <&pinctrl_gpio_2>, |
| <&pinctrl_gpio_3>, |
| <&pinctrl_gpio_4>, |
| <&pinctrl_pcie_1_reset>; |
| }; |
| |
| /* Verdin I2C_3_HDMI */ |
| &mcu_i2c0 { |
| status = "okay"; |
| }; |
| |
| /* Verdin CAN_2 */ |
| &mcu_mcan0 { |
| status = "okay"; |
| }; |
| |
| /* Verdin UART_4 */ |
| &mcu_uart0 { |
| status = "okay"; |
| }; |
| |
| /* Verdin SD_1 */ |
| &sdhci1 { |
| status = "okay"; |
| }; |
| |
| /* Verdin USB_1 */ |
| &usbss0 { |
| status = "okay"; |
| }; |
| |
| &usb0 { |
| status = "okay"; |
| }; |
| |
| /* Verdin USB_2 */ |
| &usbss1 { |
| status = "okay"; |
| }; |
| |
| &usb1 { |
| status = "okay"; |
| }; |
| |
| /* Verdin CTRL_WAKE1_MICO# */ |
| &verdin_gpio_keys { |
| status = "okay"; |
| }; |
| |
| /* Verdin PCIE_1_RESET# */ |
| &verdin_pcie_1_reset_hog { |
| status = "okay"; |
| }; |
| |
| /* Verdin UART_2 */ |
| &wkup_uart0 { |
| status = "okay"; |
| }; |