| // SPDX-License-Identifier: GPL-2.0+ |
| /dts-v1/; |
| |
| #include "aspeed-g5.dtsi" |
| #include <dt-bindings/gpio/aspeed-gpio.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| /{ |
| model = "ASRock ROMED8HM3 BMC v1.00"; |
| compatible = "asrock,romed8hm3-bmc", "aspeed,ast2500"; |
| |
| aliases { |
| serial4 = &uart5; |
| }; |
| |
| chosen { |
| stdout-path = &uart5; |
| bootargs = "console=tty0 console=ttyS4,115200 earlycon"; |
| }; |
| |
| memory@80000000 { |
| reg = <0x80000000 0x20000000>; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| heartbeat { |
| gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>; |
| linux,default-trigger = "timer"; |
| }; |
| |
| system-fault { |
| gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; |
| panic-indicator; |
| }; |
| }; |
| |
| iio-hwmon { |
| compatible = "iio-hwmon"; |
| io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, |
| <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, |
| <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, |
| <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>; |
| }; |
| }; |
| |
| &fmc { |
| status = "okay"; |
| flash@0 { |
| status = "okay"; |
| m25p,fast-read; |
| label = "bmc"; |
| spi-max-frequency = <50000000>; /* 50 MHz */ |
| #include "openbmc-flash-layout-64.dtsi" |
| }; |
| }; |
| |
| &uart5 { |
| status = "okay"; |
| }; |
| |
| &vuart { |
| status = "okay"; |
| aspeed,lpc-io-reg = <0x2f8>; |
| aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| &mac0 { |
| status = "okay"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; |
| }; |
| |
| &i2c0 { |
| status = "okay"; |
| |
| /* inlet temp sensor */ |
| w83773g@4c { |
| compatible = "nuvoton,w83773g"; |
| reg = <0x4c>; |
| }; |
| }; |
| |
| &i2c1 { |
| status = "okay"; |
| }; |
| |
| &i2c2 { |
| status = "okay"; |
| |
| /* IPB temp sensor */ |
| w83773g@4c { |
| compatible = "nuvoton,w83773g"; |
| reg = <0x4c>; |
| }; |
| |
| /* IPB PMIC */ |
| lm25066@40 { |
| compatible = "lm25066"; |
| reg = <0x40>; |
| shunt-resistor-micro-ohms = <1000>; |
| }; |
| |
| /* 12VSB PMIC */ |
| lm25066@41 { |
| compatible = "lm25066"; |
| reg = <0x41>; |
| shunt-resistor-micro-ohms = <10000>; |
| }; |
| }; |
| |
| &i2c4 { |
| status = "okay"; |
| }; |
| |
| &i2c5 { |
| status = "okay"; |
| }; |
| |
| &i2c6 { |
| status = "okay"; |
| }; |
| |
| &i2c7 { |
| status = "okay"; |
| |
| /* Baseboard FRU eeprom */ |
| eeprom@50 { |
| compatible = "st,24c128", "atmel,24c128"; |
| reg = <0x50>; |
| pagesize = <16>; |
| }; |
| }; |
| |
| &i2c8 { |
| status = "okay"; |
| }; |
| |
| &i2c9 { |
| status = "okay"; |
| }; |
| |
| &video { |
| status = "okay"; |
| }; |
| |
| &vhub { |
| status = "okay"; |
| }; |
| |
| &lpc_ctrl { |
| status = "okay"; |
| }; |
| |
| &lpc_snoop { |
| status = "okay"; |
| snoop-ports = <0x80>; |
| }; |
| |
| &kcs3 { |
| status = "okay"; |
| aspeed,lpc-io-reg = <0xca2>; |
| }; |
| |
| &pwm_tacho { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm3_default |
| &pinctrl_pwm4_default |
| &pinctrl_pwm5_default |
| &pinctrl_pwm6_default>; |
| |
| fan@3 { |
| reg = <0x03>; |
| aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0b>; |
| }; |
| |
| fan@4 { |
| reg = <0x04>; |
| aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0c>; |
| }; |
| |
| fan@5 { |
| reg = <0x05>; |
| aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0d>; |
| }; |
| |
| fan@6 { |
| reg = <0x06>; |
| aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0e>; |
| }; |
| }; |
| |
| &gpio { |
| status = "okay"; |
| gpio-line-names = |
| /* A */ "LOCATORLED_STATUS_N", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI", |
| "", "", "", "", |
| /* B */ "POST_COMPLETE_N", "", "", "", "", "", "", "", |
| /* C */ "", "", "", "", "PCIE_HP_SEL_N", "PCIE_SATA_SEL_N", "LOCATORBTN", "", |
| /* D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON", |
| "", "", "", "PSU_FAN_FAIL_N", |
| /* E */ "", "", "", "", "", "", "", "", |
| /* F */ "NIC_PWR_GOOD", "PRSNTB0", "PRSNTB1", "PRSNTB2", |
| "PRSNTB3", "", "3VSB_PCIE1_PG", "12V_PCIE1_PG", |
| /* G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2", |
| "BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "BMC_ALERT4_N", |
| /* H */ "X24_C1_PRSNT", "X24_C2_PRSNT", "X24_C3_PRSNT", "FM_MEM_THERM_EVENT_BMC_R_N", |
| "FACMODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN", |
| /* I */ "", "", "", "", "", "", "", "", |
| /* J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "", "P0_MA_DDR_QS_CS_N", |
| "", "", "", "", |
| /* K */ "", "", "", "", "", "", "", "", |
| /* L */ "", "", "", "", "", "", "", "", |
| /* M */ "", "", "MEZZ_PWRBRK_N", "OCP_HP_RST_EN", |
| "MAIN_PWR_EN_G", "BMC_MAIN_EN", "AUX_PWR_EN_G", "BMC_AUX_EN", |
| /* N */ "", "", "", "", "", "", "", "", |
| /* O */ "", "", "", "", "", "", "", "", |
| /* P */ "", "", "", "", "", "", "", "", |
| /* Q */ "", "", "", "", |
| "BMC_SMB_PRESENT_1_N", "BMC_SMB_PRESENT_2_N", |
| "BMC_SMB_PRESENT_3_N", "BMC_PCIE_WAKE_N", |
| /* R */ "", "", "THERMALTRIP_CLEAR_N", "", "", "", "", "", |
| /* S */ "", "", "", "", "", "", "", "", |
| /* T */ "", "", "", "", "", "", "", "", |
| /* U */ "", "", "", "", "", "", "", "", |
| /* V */ "", "", "", "", "", "", "", "", |
| /* W */ "", "", "", "", "", "", "", "", |
| /* X */ "", "", "", "", "", "", "", "", |
| /* Y */ "SLP_S3", "SLP_S4_S5", "NODE_ID_1", "NODE_ID_2", "", "", "", "", |
| /* Z */ "", "", "SYSTEM_FAULT_LED_N", "FAST_THROTTLE_N", |
| "", "", "", "", |
| /* AA */ "FM_CPU0_IBMC_THERMTRIP_N", "", "PROCHOT_L_G", "", |
| "", "", "", "", |
| /* AB */ "BMC_FORCE_SELFREFRESH", "PWRGD_OUT", "", "IRQ_BMC_PCH_SMI_LPC_N", |
| "", "", "", "", |
| /* AC */ "", "", "", "", "", "", "", ""; |
| }; |
| |
| &adc { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_adc0_default |
| &pinctrl_adc1_default |
| &pinctrl_adc2_default |
| &pinctrl_adc3_default |
| &pinctrl_adc4_default |
| &pinctrl_adc5_default |
| &pinctrl_adc6_default |
| &pinctrl_adc7_default |
| &pinctrl_adc8_default |
| &pinctrl_adc9_default |
| &pinctrl_adc10_default |
| &pinctrl_adc11_default |
| &pinctrl_adc12_default |
| &pinctrl_adc13_default |
| &pinctrl_adc14_default |
| &pinctrl_adc15_default>; |
| }; |