Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 762f85bb2e36762ee4d7395002b8181905aec690 / . / src / arm64 / qcom / sm8650-qrd.dts
blob: 4e94f7fe4d2d0430ece931c236b14ac3714f2fe7 [file] [log] [blame]
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2023, Linaro Limited
4 */
5
6/dts-v1/;
7
8#include <dt-bindings/leds/common.h>
9#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
10#include "sm8650.dtsi"
11#include "pm8010.dtsi"
12#include "pm8550.dtsi"
13#include "pm8550b.dtsi"
14#define PMK8550VE_SID 8
15#include "pm8550ve.dtsi"
16#include "pm8550vs.dtsi"
17#include "pmk8550.dtsi"
18#include "pmr735d_a.dtsi"
19
20/ {
21 model = "Qualcomm Technologies, Inc. SM8650 QRD";
22 compatible = "qcom,sm8650-qrd", "qcom,sm8650";
23
24 aliases {
25 serial0 = &uart15;
26 serial1 = &uart14;
27 };
28
29 chosen {
30 stdout-path = "serial0:115200n8";
31 };
32
33 gpio-keys {
34 compatible = "gpio-keys";
35
36 pinctrl-0 = <&volume_up_n>;
37 pinctrl-names = "default";
38
39 key-volume-up {
40 label = "Volume Up";
41 linux,code = <KEY_VOLUMEUP>;
42 gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
43 debounce-interval = <15>;
44 linux,can-disable;
45 wakeup-source;
46 };
47 };
48
49 pmic-glink {
50 compatible = "qcom,sm8650-pmic-glink",
51 "qcom,sm8550-pmic-glink",
52 "qcom,pmic-glink";
53 #address-cells = <1>;
54 #size-cells = <0>;
55 orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
56
57 connector@0 {
58 compatible = "usb-c-connector";
59 reg = <0>;
60
61 power-role = "dual";
62 data-role = "dual";
63
64 ports {
65 #address-cells = <1>;
66 #size-cells = <0>;
67
68 port@0 {
69 reg = <0>;
70
71 pmic_glink_hs_in: endpoint {
72 remote-endpoint = <&usb_1_dwc3_hs>;
73 };
74 };
75
76 port@1 {
77 reg = <1>;
78
79 pmic_glink_ss_in: endpoint {
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame]80 remote-endpoint = <&redriver_ss_out>;
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]81 };
82 };
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame]83
84 port@2 {
85 reg = <2>;
86
87 pmic_glink_sbu: endpoint {
88 remote-endpoint = <&wcd_usbss_sbu_mux>;
89 };
90 };
91 };
92 };
93 };
94
95 sound {
96 compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard";
97 model = "SM8650-QRD";
98 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
99 "SpkrRight IN", "WSA_SPK2 OUT",
100 "IN1_HPHL", "HPHL_OUT",
101 "IN2_HPHR", "HPHR_OUT",
102 "AMIC1", "MIC BIAS1",
103 "AMIC2", "MIC BIAS2",
104 "AMIC3", "MIC BIAS3",
105 "AMIC4", "MIC BIAS3",
106 "AMIC5", "MIC BIAS4",
107 "TX SWR_INPUT0", "ADC1_OUTPUT",
108 "TX SWR_INPUT1", "ADC2_OUTPUT",
109 "TX SWR_INPUT2", "ADC3_OUTPUT",
110 "TX SWR_INPUT3", "ADC4_OUTPUT";
111
112 wcd-playback-dai-link {
113 link-name = "WCD Playback";
114
115 cpu {
116 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
117 };
118
119 codec {
120 sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
121 };
122
123 platform {
124 sound-dai = <&q6apm>;
125 };
126 };
127
128 wcd-capture-dai-link {
129 link-name = "WCD Capture";
130
131 cpu {
132 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
133 };
134
135 codec {
136 sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>;
137 };
138
139 platform {
140 sound-dai = <&q6apm>;
141 };
142 };
143
144 wsa-dai-link {
145 link-name = "WSA Playback";
146
147 cpu {
148 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
149 };
150
151 codec {
152 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
153 };
154
155 platform {
156 sound-dai = <&q6apm>;
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]157 };
158 };
159 };
160
161 vph_pwr: vph-pwr-regulator {
162 compatible = "regulator-fixed";
163
164 regulator-name = "vph_pwr";
165 regulator-min-microvolt = <3700000>;
166 regulator-max-microvolt = <3700000>;
167
168 regulator-always-on;
169 regulator-boot-on;
170 };
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame]171
172 wcd939x: audio-codec {
173 compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec";
174
175 pinctrl-0 = <&wcd_default>;
176 pinctrl-names = "default";
177
178 qcom,micbias1-microvolt = <1800000>;
179 qcom,micbias2-microvolt = <1800000>;
180 qcom,micbias3-microvolt = <1800000>;
181 qcom,micbias4-microvolt = <1800000>;
182 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
183 qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
184 qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
185 qcom,rx-device = <&wcd_rx>;
186 qcom,tx-device = <&wcd_tx>;
187
188 reset-gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
189
190 vdd-buck-supply = <&vreg_l15b_1p8>;
191 vdd-rxtx-supply = <&vreg_l15b_1p8>;
192 vdd-io-supply = <&vreg_l15b_1p8>;
193 vdd-mic-bias-supply = <&vreg_bob1>;
194
195 #sound-dai-cells = <1>;
196
197 mode-switch;
198 orientation-switch;
199
200 port {
201 wcd_codec_headset_in: endpoint {
202 remote-endpoint = <&wcd_usbss_headset_out>;
203 };
204 };
205 };
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]206};
207
208&apps_rsc {
209 regulators-0 {
210 compatible = "qcom,pm8550-rpmh-regulators";
211
212 vdd-bob1-supply = <&vph_pwr>;
213 vdd-bob2-supply = <&vph_pwr>;
214 vdd-l2-l13-l14-supply = <&vreg_bob1>;
215 vdd-l3-supply = <&vreg_s1c_1p2>;
216 vdd-l5-l16-supply = <&vreg_bob1>;
217 vdd-l6-l7-supply = <&vreg_bob1>;
218 vdd-l8-l9-supply = <&vreg_bob1>;
219 vdd-l11-supply = <&vreg_s1c_1p2>;
220 vdd-l12-supply = <&vreg_s6c_1p8>;
221 vdd-l15-supply = <&vreg_s6c_1p8>;
222 vdd-l17-supply = <&vreg_bob2>;
223
224 qcom,pmic-id = "b";
225
226 vreg_bob1: bob1 {
227 regulator-name = "vreg_bob1";
228 regulator-min-microvolt = <3296000>;
229 regulator-max-microvolt = <3960000>;
230 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
231 };
232
233 vreg_bob2: bob2 {
234 regulator-name = "vreg_bob2";
235 regulator-min-microvolt = <2720000>;
236 regulator-max-microvolt = <3008000>;
237 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
238 };
239
240 vreg_l2b_3p0: ldo2 {
241 regulator-name = "vreg_l2b_3p0";
242 regulator-min-microvolt = <3008000>;
243 regulator-max-microvolt = <3008000>;
244 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
245 regulator-allow-set-load;
246 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
247 RPMH_REGULATOR_MODE_HPM>;
248 };
249
250 vreg_l5b_3p1: ldo5 {
251 regulator-name = "vreg_l5b_3p1";
252 regulator-min-microvolt = <3104000>;
253 regulator-max-microvolt = <3104000>;
254 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
255 regulator-allow-set-load;
256 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
257 RPMH_REGULATOR_MODE_HPM>;
258 };
259
260 vreg_l6b_1p8: ldo6 {
261 regulator-name = "vreg_l6b_1p8";
262 regulator-min-microvolt = <1800000>;
263 regulator-max-microvolt = <3008000>;
264 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
265 regulator-allow-set-load;
266 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
267 RPMH_REGULATOR_MODE_HPM>;
268 };
269
270 vreg_l7b_1p8: ldo7 {
271 regulator-name = "vreg_l7b_1p8";
272 regulator-min-microvolt = <1800000>;
273 regulator-max-microvolt = <3008000>;
274 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
275 };
276
277 vreg_l8b_1p8: ldo8 {
278 regulator-name = "vreg_l8b_1p8";
279 regulator-min-microvolt = <1800000>;
280 regulator-max-microvolt = <3008000>;
281 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
282 regulator-allow-set-load;
283 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
284 RPMH_REGULATOR_MODE_HPM>;
285 };
286
287 vreg_l11b_1p2: ldo11 {
288 regulator-name = "vreg_l11b_1p2";
289 regulator-min-microvolt = <1200000>;
290 regulator-max-microvolt = <1504000>;
291 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
292 regulator-allow-set-load;
293 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
294 RPMH_REGULATOR_MODE_HPM>;
295 };
296
297 vreg_l12b_1p8: ldo12 {
298 regulator-name = "vreg_l12b_1p8";
299 regulator-min-microvolt = <1800000>;
300 regulator-max-microvolt = <1800000>;
301 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
302 regulator-allow-set-load;
303 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
304 RPMH_REGULATOR_MODE_HPM>;
305 };
306
307 vreg_l13b_3p0: ldo13 {
308 regulator-name = "vreg_l13b_3p0";
309 regulator-min-microvolt = <3000000>;
310 regulator-max-microvolt = <3000000>;
311 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
312 regulator-allow-set-load;
313 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
314 RPMH_REGULATOR_MODE_HPM>;
315 };
316
317 vreg_l14b_3p2: ldo14 {
318 regulator-name = "vreg_l14b_3p2";
319 regulator-min-microvolt = <3200000>;
320 regulator-max-microvolt = <3200000>;
321 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
322 regulator-allow-set-load;
323 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
324 RPMH_REGULATOR_MODE_HPM>;
325 };
326
327 vreg_l15b_1p8: ldo15 {
328 regulator-name = "vreg_l15b_1p8";
329 regulator-min-microvolt = <1800000>;
330 regulator-max-microvolt = <1800000>;
331 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
332 regulator-allow-set-load;
333 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
334 RPMH_REGULATOR_MODE_HPM>;
335 };
336
337 vreg_l16b_2p8: ldo16 {
338 regulator-name = "vreg_l16b_2p8";
339 regulator-min-microvolt = <2800000>;
340 regulator-max-microvolt = <2800000>;
341 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
342 regulator-allow-set-load;
343 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
344 RPMH_REGULATOR_MODE_HPM>;
345 };
346
347 vreg_l17b_2p5: ldo17 {
348 regulator-name = "vreg_l17b_2p5";
349 regulator-min-microvolt = <2504000>;
350 regulator-max-microvolt = <2504000>;
351 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
352 regulator-allow-set-load;
353 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
354 RPMH_REGULATOR_MODE_HPM>;
355 };
356 };
357
358 regulators-1 {
359 compatible = "qcom,pm8550vs-rpmh-regulators";
360
361 vdd-l1-supply = <&vreg_s1c_1p2>;
362 vdd-l2-supply = <&vreg_s1c_1p2>;
363 vdd-l3-supply = <&vreg_s1c_1p2>;
364 vdd-s1-supply = <&vph_pwr>;
365 vdd-s2-supply = <&vph_pwr>;
366 vdd-s3-supply = <&vph_pwr>;
367 vdd-s4-supply = <&vph_pwr>;
368 vdd-s5-supply = <&vph_pwr>;
369 vdd-s6-supply = <&vph_pwr>;
370
371 qcom,pmic-id = "c";
372
373 vreg_s1c_1p2: smps1 {
374 regulator-name = "vreg_s1c_1p2";
375 regulator-min-microvolt = <1256000>;
376 regulator-max-microvolt = <1348000>;
377 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
378 };
379
380 vreg_s2c_0p8: smps2 {
381 regulator-name = "vreg_s2c_0p8";
382 regulator-min-microvolt = <852000>;
383 regulator-max-microvolt = <1036000>;
384 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
385 };
386
387 vreg_s3c_0p9: smps3 {
388 regulator-name = "vreg_s3c_0p9";
389 regulator-min-microvolt = <976000>;
390 regulator-max-microvolt = <1064000>;
391 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
392 };
393
394 vreg_s4c_1p2: smps4 {
395 regulator-name = "vreg_s4c_1p2";
396 regulator-min-microvolt = <1224000>;
397 regulator-max-microvolt = <1280000>;
398 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
399 };
400
401 vreg_s5c_0p7: smps5 {
402 regulator-name = "vreg_s5c_0p7";
403 regulator-min-microvolt = <752000>;
404 regulator-max-microvolt = <900000>;
405 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
406 };
407
408 vreg_s6c_1p8: smps6 {
409 regulator-name = "vreg_s6c_1p8";
410 regulator-min-microvolt = <1856000>;
411 regulator-max-microvolt = <2000000>;
412 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
413 };
414
415 vreg_l1c_1p2: ldo1 {
416 regulator-name = "vreg_l1c_1p2";
417 regulator-min-microvolt = <1200000>;
418 regulator-max-microvolt = <1200000>;
419 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
420 regulator-allow-set-load;
421 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
422 RPMH_REGULATOR_MODE_HPM>;
423 };
424
425 vreg_l3c_1p2: ldo3 {
426 regulator-name = "vreg_l3c_1p2";
427 regulator-min-microvolt = <1200000>;
428 regulator-max-microvolt = <1200000>;
429 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
430 regulator-allow-set-load;
431 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
432 RPMH_REGULATOR_MODE_HPM>;
433 };
434 };
435
436 regulators-2 {
437 compatible = "qcom,pm8550vs-rpmh-regulators";
438
439 vdd-l1-supply = <&vreg_s3c_0p9>;
440
441 qcom,pmic-id = "d";
442
443 vreg_l1d_0p88: ldo1 {
444 regulator-name = "vreg_l1d_0p88";
445 regulator-min-microvolt = <912000>;
446 regulator-max-microvolt = <920000>;
447 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
448 regulator-allow-set-load;
449 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
450 RPMH_REGULATOR_MODE_HPM>;
451 };
452 };
453
454 regulators-3 {
455 compatible = "qcom,pm8550vs-rpmh-regulators";
456
457 vdd-l3-supply = <&vreg_s3c_0p9>;
458
459 qcom,pmic-id = "e";
460
461 vreg_l3e_0p9: ldo3 {
462 regulator-name = "vreg_l3e_0p9";
463 regulator-min-microvolt = <880000>;
464 regulator-max-microvolt = <920000>;
465 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
466 regulator-allow-set-load;
467 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
468 RPMH_REGULATOR_MODE_HPM>;
469 };
470 };
471
472 regulators-4 {
473 compatible = "qcom,pm8550vs-rpmh-regulators";
474
475 vdd-l1-supply = <&vreg_s3c_0p9>;
476 vdd-l3-supply = <&vreg_s3c_0p9>;
477
478 qcom,pmic-id = "g";
479
480 vreg_l1g_0p91: ldo1 {
481 regulator-name = "vreg_l1g_0p91";
482 regulator-min-microvolt = <912000>;
483 regulator-max-microvolt = <920000>;
484 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
485 regulator-allow-set-load;
486 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
487 RPMH_REGULATOR_MODE_HPM>;
488 };
489
490 vreg_l3g_0p91: ldo3 {
491 regulator-name = "vreg_l3g_0p91";
492 regulator-min-microvolt = <880000>;
493 regulator-max-microvolt = <912000>;
494 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
495 regulator-allow-set-load;
496 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
497 RPMH_REGULATOR_MODE_HPM>;
498 };
499 };
500
501 regulators-5 {
502 compatible = "qcom,pm8550ve-rpmh-regulators";
503
504 vdd-l1-supply = <&vreg_s3c_0p9>;
505 vdd-l2-supply = <&vreg_s3c_0p9>;
506 vdd-l3-supply = <&vreg_s1c_1p2>;
507 vdd-s4-supply = <&vph_pwr>;
508
509 qcom,pmic-id = "i";
510
511 vreg_s4i_0p85: smps4 {
512 regulator-name = "vreg_s4i_0p85";
513 regulator-min-microvolt = <852000>;
514 regulator-max-microvolt = <1004000>;
515 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
516 };
517
518 vreg_l1i_0p88: ldo1 {
519 regulator-name = "vreg_l1i_0p88";
520 regulator-min-microvolt = <880000>;
521 regulator-max-microvolt = <912000>;
522 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
523 regulator-allow-set-load;
524 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
525 RPMH_REGULATOR_MODE_HPM>;
526 };
527
528 vreg_l2i_0p88: ldo2 {
529 regulator-name = "vreg_l2i_0p88";
530 regulator-min-microvolt = <880000>;
531 regulator-max-microvolt = <912000>;
532 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
533 regulator-allow-set-load;
534 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
535 RPMH_REGULATOR_MODE_HPM>;
536 };
537
538 vreg_l3i_1p2: ldo3 {
539 regulator-name = "vreg_l3i_0p91";
540 regulator-min-microvolt = <1200000>;
541 regulator-max-microvolt = <1200000>;
542 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
543 regulator-allow-set-load;
544 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
545 RPMH_REGULATOR_MODE_HPM>;
546 };
547 };
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame]548
549 regulators-6 {
550 compatible = "qcom,pm8010-rpmh-regulators";
551 qcom,pmic-id = "m";
552
553 vdd-l1-l2-supply = <&vreg_s1c_1p2>;
554 vdd-l3-l4-supply = <&vreg_bob2>;
555 vdd-l5-supply = <&vreg_s6c_1p8>;
556 vdd-l6-supply = <&vreg_bob1>;
557 vdd-l7-supply = <&vreg_bob1>;
558
559 vreg_l1m_1p1: ldo1 {
560 regulator-name = "vreg_l1m_1p1";
561 regulator-min-microvolt = <1104000>;
562 regulator-max-microvolt = <1104000>;
563 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
564 regulator-allow-set-load;
565 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
566 RPMH_REGULATOR_MODE_HPM>;
567 };
568
569 vreg_l2m_1p056: ldo2 {
570 regulator-name = "vreg_l2m_1p056";
571 regulator-min-microvolt = <1056000>;
572 regulator-max-microvolt = <1056000>;
573 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
574 regulator-allow-set-load;
575 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
576 RPMH_REGULATOR_MODE_HPM>;
577 };
578
579 vreg_l3m_2p8: ldo3 {
580 regulator-name = "vreg_l3m_2p8";
581 regulator-min-microvolt = <2800000>;
582 regulator-max-microvolt = <2800000>;
583 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
584 };
585
586 vreg_l4m_2p8: ldo4 {
587 regulator-name = "vreg_l4m_2p8";
588 regulator-min-microvolt = <2800000>;
589 regulator-max-microvolt = <2800000>;
590 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
591 };
592
593 vreg_l5m_1p8: ldo5 {
594 regulator-name = "vreg_l5m_1p8";
595 regulator-min-microvolt = <1800000>;
596 regulator-max-microvolt = <1800000>;
597 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
598 };
599
600 vreg_l6m_2p8: ldo6 {
601 regulator-name = "vreg_l6m_2p8";
602 regulator-min-microvolt = <2800000>;
603 regulator-max-microvolt = <2800000>;
604 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
605 };
606
607 vreg_l7m_2p96: ldo7 {
608 regulator-name = "vreg_l7m_2p96";
609 regulator-min-microvolt = <2960000>;
610 regulator-max-microvolt = <2960000>;
611 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
612 };
613 };
614
615 regulators-7 {
616 compatible = "qcom,pm8010-rpmh-regulators";
617 qcom,pmic-id = "n";
618
619 vdd-l1-l2-supply = <&vreg_s1c_1p2>;
620 vdd-l3-l4-supply = <&vreg_s6c_1p8>;
621 vdd-l5-supply = <&vreg_bob2>;
622 vdd-l6-supply = <&vreg_bob2>;
623 vdd-l7-supply = <&vreg_bob1>;
624
625 vreg_l1n_1p1: ldo1 {
626 regulator-name = "vreg_l1n_1p1";
627 regulator-min-microvolt = <1104000>;
628 regulator-max-microvolt = <1104000>;
629 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
630 regulator-allow-set-load;
631 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
632 RPMH_REGULATOR_MODE_HPM>;
633 };
634
635 vreg_l2n_1p056: ldo2 {
636 regulator-name = "vreg_l2n_1p056";
637 regulator-min-microvolt = <1056000>;
638 regulator-max-microvolt = <1056000>;
639 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
640 regulator-allow-set-load;
641 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
642 RPMH_REGULATOR_MODE_HPM>;
643 };
644
645 vreg_l3n_1p8: ldo3 {
646 regulator-name = "vreg_l3n_1p8";
647 regulator-min-microvolt = <1800000>;
648 regulator-max-microvolt = <1800000>;
649 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
650 };
651
652 vreg_l4n_1p8: ldo4 {
653 regulator-name = "vreg_l4n_1p8";
654 regulator-min-microvolt = <1800000>;
655 regulator-max-microvolt = <1800000>;
656 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
657 };
658
659 vreg_l5n_2p8: ldo5 {
660 regulator-name = "vreg_l5n_2p8";
661 regulator-min-microvolt = <2800000>;
662 regulator-max-microvolt = <2800000>;
663 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
664 };
665
666 vreg_l6n_2p8: ldo6 {
667 regulator-name = "vreg_l6n_2p8";
668 regulator-min-microvolt = <2800000>;
669 regulator-max-microvolt = <2800000>;
670 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
671 };
672
673 vreg_l7n_3p3: ldo7 {
674 regulator-name = "vreg_l7n_3p3";
675 regulator-min-microvolt = <3304000>;
676 regulator-max-microvolt = <3304000>;
677 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
678 };
679 };
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]680};
681
682&dispcc {
683 status = "okay";
684};
685
686&gpi_dma1 {
687 status = "okay";
688};
689
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame]690&i2c3 {
691 status = "okay";
692
693 wcd_usbss: typec-mux@e {
694 compatible = "qcom,wcd9395-usbss", "qcom,wcd9390-usbss";
695 reg = <0xe>;
696
697 vdd-supply = <&vreg_l15b_1p8>;
698 reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>;
699
700 mode-switch;
701 orientation-switch;
702
703 ports {
704 #address-cells = <1>;
705 #size-cells = <0>;
706
707 port@0 {
708 reg = <0>;
709
710 wcd_usbss_sbu_mux: endpoint {
711 remote-endpoint = <&pmic_glink_sbu>;
712 };
713 };
714
715 port@1 {
716 reg = <1>;
717
718 wcd_usbss_headset_out: endpoint {
719 remote-endpoint = <&wcd_codec_headset_in>;
720 };
721 };
722 };
723 };
724};
725
726&i2c6 {
727 status = "okay";
728
729 typec-mux@1c {
730 compatible = "onnn,nb7vpq904m";
731 reg = <0x1c>;
732
733 vcc-supply = <&vreg_l15b_1p8>;
734
735 retimer-switch;
736 orientation-switch;
737
738 ports {
739 #address-cells = <1>;
740 #size-cells = <0>;
741
742 port@0 {
743 reg = <0>;
744
745 redriver_ss_out: endpoint {
746 remote-endpoint = <&pmic_glink_ss_in>;
747 };
748 };
749
750 port@1 {
751 reg = <1>;
752
753 redriver_ss_in: endpoint {
754 data-lanes = <3 2 1 0>;
755 remote-endpoint = <&usb_dp_qmpphy_out>;
756 };
757 };
758 };
759 };
760};
761
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]762&ipa {
763 qcom,gsi-loader = "self";
764 memory-region = <&ipa_fw_mem>;
765 firmware-name = "qcom/sm8650/ipa_fws.mbn";
766 status = "okay";
767};
768
Tom Rini762f85b2024-07-20 11:15:10 -0600[diff] [blame^]769&gpu {
770 status = "okay";
771
772 zap-shader {
773 firmware-name = "qcom/sm8650/gen70900_zap.mbn";
774 };
775};
776
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame]777&lpass_tlmm {
778 spkr_1_sd_n_active: spkr-1-sd-n-active-state {
779 pins = "gpio21";
780 function = "gpio";
781 drive-strength = <16>;
782 bias-disable;
783 output-low;
784 };
785};
786
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]787&mdss {
788 status = "okay";
789};
790
791&mdss_dsi0 {
792 vdda-supply = <&vreg_l3i_1p2>;
793
794 status = "okay";
795
796 panel@0 {
797 compatible = "visionox,vtdr6130";
798 reg = <0>;
799
800 reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
801
802 vddio-supply = <&vreg_l12b_1p8>;
803 vci-supply = <&vreg_l13b_3p0>;
804 vdd-supply = <&vreg_l11b_1p2>;
805
806 pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
807 pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
808 pinctrl-names = "default", "sleep";
809
810 port {
811 panel0_in: endpoint {
812 remote-endpoint = <&mdss_dsi0_out>;
813 };
814 };
815 };
816};
817
818&mdss_dsi0_out {
819 remote-endpoint = <&panel0_in>;
820 data-lanes = <0 1 2 3>;
821};
822
823&mdss_dsi0_phy {
824 vdds-supply = <&vreg_l1i_0p88>;
825
826 status = "okay";
827};
828
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame]829&mdss_dp0 {
830 status = "okay";
831};
832
833&mdss_dp0_out {
834 data-lanes = <0 1>;
835 remote-endpoint = <&usb_dp_qmpphy_dp_in>;
836};
837
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]838&pcie_1_phy_aux_clk {
839 clock-frequency = <1000>;
840};
841
842&pcie0 {
843 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
844 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
845
846 pinctrl-0 = <&pcie0_default_state>;
847 pinctrl-names = "default";
848
849 status = "okay";
850};
851
852&pcie0_phy {
853 vdda-phy-supply = <&vreg_l1i_0p88>;
854 vdda-pll-supply = <&vreg_l3i_1p2>;
855
856 status = "okay";
857};
858
859&pon_pwrkey {
860 status = "okay";
861};
862
863&pon_resin {
864 linux,code = <KEY_VOLUMEDOWN>;
865
866 status = "okay";
867};
868
869&pm8550_flash {
870 status = "okay";
871
872 led-0 {
873 function = LED_FUNCTION_FLASH;
874 color = <LED_COLOR_ID_YELLOW>;
875 led-sources = <1>, <4>;
876 led-max-microamp = <500000>;
877 flash-max-microamp = <2000000>;
878 flash-max-timeout-us = <1280000>;
879 function-enumerator = <0>;
880 };
881
882 led-1 {
883 function = LED_FUNCTION_FLASH;
884 color = <LED_COLOR_ID_WHITE>;
885 led-sources = <2>, <3>;
886 led-max-microamp = <500000>;
887 flash-max-microamp = <2000000>;
888 flash-max-timeout-us = <1280000>;
889 function-enumerator = <1>;
890 };
891};
892
893&pm8550_gpios {
894 volume_up_n: volume-up-n-state {
895 pins = "gpio6";
896 function = "normal";
897 bias-pull-up;
898 input-enable;
899 power-source = <1>;
900 };
901};
902
903&pm8550_pwm {
904 status = "okay";
905
906 multi-led {
907 color = <LED_COLOR_ID_RGB>;
908 function = LED_FUNCTION_STATUS;
909
910 #address-cells = <1>;
911 #size-cells = <0>;
912
913 led@1 {
914 reg = <1>;
915 color = <LED_COLOR_ID_RED>;
916 };
917
918 led@2 {
919 reg = <2>;
920 color = <LED_COLOR_ID_GREEN>;
921 };
922
923 led@3 {
924 reg = <3>;
925 color = <LED_COLOR_ID_BLUE>;
926 };
927 };
928};
929
930&pm8550b_eusb2_repeater {
931 vdd18-supply = <&vreg_l15b_1p8>;
932 vdd3-supply = <&vreg_l5b_3p1>;
933};
934
935&pmk8550_rtc {
936 status = "okay";
937};
938
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame]939&qup_i2c3_data_clk {
940 /* Use internal I2C pull-up */
941 bias-pull-up = <2200>;
942};
943
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]944&qupv3_id_0 {
945 status = "okay";
946};
947
948&qupv3_id_1 {
949 status = "okay";
950};
951
952&remoteproc_adsp {
953 firmware-name = "qcom/sm8650/adsp.mbn",
954 "qcom/sm8650/adsp_dtb.mbn";
955
956 status = "okay";
957};
958
959&remoteproc_cdsp {
960 firmware-name = "qcom/sm8650/cdsp.mbn",
961 "qcom/sm8650/cdsp_dtb.mbn";
962
963 status = "okay";
964};
965
966&remoteproc_mpss {
967 firmware-name = "qcom/sm8650/modem.mbn",
968 "qcom/sm8650/modem_dtb.mbn";
969
970 status = "okay";
971};
972
973&sleep_clk {
974 clock-frequency = <32000>;
975};
976
977&spi4 {
978 status = "okay";
979
980 touchscreen@0 {
981 compatible = "goodix,gt9916";
982 reg = <0>;
983
984 interrupt-parent = <&tlmm>;
985 interrupts = <162 IRQ_TYPE_LEVEL_LOW>;
986
987 reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>;
988
989 avdd-supply = <&vreg_l14b_3p2>;
990
991 spi-max-frequency = <1000000>;
992
993 touchscreen-size-x = <1080>;
994 touchscreen-size-y = <2400>;
995
996 pinctrl-0 = <&ts_irq>, <&ts_reset>;
997 pinctrl-names = "default";
998 };
999};
1000
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame]1001&swr0 {
1002 status = "okay";
1003
1004 /* WSA8845, Speaker Left */
1005 left_spkr: speaker@0,0 {
1006 compatible = "sdw20217020400";
1007 reg = <0 0>;
1008 pinctrl-0 = <&spkr_1_sd_n_active>;
1009 pinctrl-names = "default";
1010 powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>;
1011 #sound-dai-cells = <0>;
1012 sound-name-prefix = "SpkrLeft";
1013 vdd-1p8-supply = <&vreg_l15b_1p8>;
1014 vdd-io-supply = <&vreg_l3c_1p2>;
1015 };
1016
1017 /* WSA8845, Speaker Right */
1018 right_spkr: speaker@0,1 {
1019 compatible = "sdw20217020400";
1020 reg = <0 1>;
1021 pinctrl-0 = <&spkr_2_sd_n_active>;
1022 pinctrl-names = "default";
1023 powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
1024 #sound-dai-cells = <0>;
1025 sound-name-prefix = "SpkrRight";
1026 vdd-1p8-supply = <&vreg_l15b_1p8>;
1027 vdd-io-supply = <&vreg_l3c_1p2>;
1028 };
1029};
1030
1031&swr1 {
1032 status = "okay";
1033
1034 /* WCD9395 RX */
1035 wcd_rx: codec@0,4 {
1036 compatible = "sdw20217010e00";
1037 reg = <0 4>;
1038
1039 /*
1040 * WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R)
1041 * WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH)
1042 * WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R)
1043 * WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO)
1044 * WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R)
1045 * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R)
1046 */
1047 qcom,rx-port-mapping = <1 2 3 4 5 9>;
1048 };
1049};
1050
1051&swr2 {
1052 status = "okay";
1053
1054 /* WCD9395 TX */
1055 wcd_tx: codec@0,3 {
1056 compatible = "sdw20217010e00";
1057 reg = <0 3>;
1058
1059 /*
1060 * WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
1061 * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
1062 * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7)
1063 * WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11)
1064 */
1065 qcom,tx-port-mapping = <2 2 3 4>;
1066 };
1067};
1068
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]1069&tlmm {
1070 /* Reserved I/Os for NFC */
1071 gpio-reserved-ranges = <32 8>, <74 1>;
1072
1073 bt_default: bt-default-state {
1074 bt-en-pins {
1075 pins = "gpio17";
1076 function = "gpio";
1077 drive-strength = <16>;
1078 bias-disable;
1079 };
1080
1081 sw-ctrl-pins {
1082 pins = "gpio18";
1083 function = "gpio";
1084 bias-pull-down;
1085 };
1086 };
1087
1088 disp0_reset_n_active: disp0-reset-n-active-state {
1089 pins = "gpio133";
1090 function = "gpio";
1091 drive-strength = <8>;
1092 bias-disable;
1093 };
1094
1095 disp0_reset_n_suspend: disp0-reset-n-suspend-state {
1096 pins = "gpio133";
1097 function = "gpio";
1098 drive-strength = <2>;
1099 bias-pull-down;
1100 };
1101
1102 mdp_vsync_active: mdp-vsync-active-state {
1103 pins = "gpio86";
1104 function = "mdp_vsync";
1105 drive-strength = <2>;
1106 bias-pull-down;
1107 };
1108
1109 mdp_vsync_suspend: mdp-vsync-suspend-state {
1110 pins = "gpio86";
1111 function = "mdp_vsync";
1112 drive-strength = <2>;
1113 bias-pull-down;
1114 };
1115
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame]1116 spkr_2_sd_n_active: spkr-2-sd-n-active-state {
1117 pins = "gpio77";
1118 function = "gpio";
1119 drive-strength = <16>;
1120 bias-disable;
1121 output-low;
1122 };
1123
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]1124 ts_irq: ts-irq-state {
1125 pins = "gpio161";
1126 function = "gpio";
1127 drive-strength = <8>;
1128 bias-pull-up;
1129 output-disable;
1130 };
1131
1132 ts_reset: ts-reset-state {
1133 pins = "gpio162";
1134 function = "gpio";
1135 drive-strength = <8>;
1136 bias-pull-up;
1137 };
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame]1138
1139 wcd_default: wcd-reset-n-active-state {
1140 pins = "gpio107";
1141 function = "gpio";
1142 drive-strength = <16>;
1143 bias-disable;
1144 output-low;
1145 };
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]1146};
1147
1148&uart14 {
1149 status = "okay";
1150
1151 bluetooth {
1152 compatible = "qcom,wcn7850-bt";
1153
1154 clocks = <&rpmhcc RPMH_RF_CLK1>;
1155
1156 vddio-supply = <&vreg_l3c_1p2>;
1157 vddaon-supply = <&vreg_l15b_1p8>;
1158 vdddig-supply = <&vreg_s3c_0p9>;
1159 vddrfa0p8-supply = <&vreg_s3c_0p9>;
1160 vddrfa1p2-supply = <&vreg_s1c_1p2>;
1161 vddrfa1p9-supply = <&vreg_s6c_1p8>;
1162
1163 max-speed = <3200000>;
1164
1165 enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
1166 swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
1167
1168 pinctrl-0 = <&bt_default>;
1169 pinctrl-names = "default";
1170 };
1171};
1172
1173&uart15 {
1174 status = "okay";
1175};
1176
1177&ufs_mem_hc {
1178 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
1179
1180 vcc-supply = <&vreg_l17b_2p5>;
1181 vcc-max-microamp = <1300000>;
1182 vccq-supply = <&vreg_l1c_1p2>;
1183 vccq-max-microamp = <1200000>;
1184
1185 status = "okay";
1186};
1187
1188&ufs_mem_phy {
1189 vdda-phy-supply = <&vreg_l1d_0p88>;
1190 vdda-pll-supply = <&vreg_l3i_1p2>;
1191
1192 status = "okay";
1193};
1194
1195/*
1196 * DPAUX -> WCD9395 -> USB_SBU -> USB-C
1197 * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C
1198 * USB SS -> NB7VPQ904MMUTWG -> USB-C
1199 */
1200
1201&usb_1 {
1202 status = "okay";
1203};
1204
1205&usb_1_dwc3 {
1206 dr_mode = "otg";
1207 usb-role-switch;
1208};
1209
1210&usb_1_dwc3_hs {
1211 remote-endpoint = <&pmic_glink_hs_in>;
1212};
1213
1214&usb_1_dwc3_ss {
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame]1215 remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]1216};
1217
1218&usb_1_hsphy {
1219 vdd-supply = <&vreg_l1i_0p88>;
1220 vdda12-supply = <&vreg_l3i_1p2>;
1221
1222 phys = <&pm8550b_eusb2_repeater>;
1223
1224 status = "okay";
1225};
1226
1227&usb_dp_qmpphy {
1228 vdda-phy-supply = <&vreg_l3i_1p2>;
1229 vdda-pll-supply = <&vreg_l3g_0p91>;
1230
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame]1231 orientation-switch;
1232
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]1233 status = "okay";
1234};
1235
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame]1236&usb_dp_qmpphy_dp_in {
1237 remote-endpoint = <&mdss_dp0_out>;
1238};
1239
1240&usb_dp_qmpphy_out {
1241 remote-endpoint = <&redriver_ss_in>;
1242};
1243
1244&usb_dp_qmpphy_usb_ss_in {
1245 remote-endpoint = <&usb_1_dwc3_ss>;
1246};
1247
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]1248&xo_board {
1249 clock-frequency = <76800000>;
1250};