Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 93743d241c64bc1f7ecbf3262d1683176551e11f / . / src / arm64 / qcom / sm8650-qrd.dts
blob: b9151c2ddf2e5ce7944bed07aa6864ccdc75f2a5 [file] [log] [blame]
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame^]1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2023, Linaro Limited
4 */
5
6/dts-v1/;
7
8#include <dt-bindings/leds/common.h>
9#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
10#include "sm8650.dtsi"
11#include "pm8010.dtsi"
12#include "pm8550.dtsi"
13#include "pm8550b.dtsi"
14#define PMK8550VE_SID 8
15#include "pm8550ve.dtsi"
16#include "pm8550vs.dtsi"
17#include "pmk8550.dtsi"
18#include "pmr735d_a.dtsi"
19
20/ {
21 model = "Qualcomm Technologies, Inc. SM8650 QRD";
22 compatible = "qcom,sm8650-qrd", "qcom,sm8650";
23
24 aliases {
25 serial0 = &uart15;
26 serial1 = &uart14;
27 };
28
29 chosen {
30 stdout-path = "serial0:115200n8";
31 };
32
33 gpio-keys {
34 compatible = "gpio-keys";
35
36 pinctrl-0 = <&volume_up_n>;
37 pinctrl-names = "default";
38
39 key-volume-up {
40 label = "Volume Up";
41 linux,code = <KEY_VOLUMEUP>;
42 gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
43 debounce-interval = <15>;
44 linux,can-disable;
45 wakeup-source;
46 };
47 };
48
49 pmic-glink {
50 compatible = "qcom,sm8650-pmic-glink",
51 "qcom,sm8550-pmic-glink",
52 "qcom,pmic-glink";
53 #address-cells = <1>;
54 #size-cells = <0>;
55 orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
56
57 connector@0 {
58 compatible = "usb-c-connector";
59 reg = <0>;
60
61 power-role = "dual";
62 data-role = "dual";
63
64 ports {
65 #address-cells = <1>;
66 #size-cells = <0>;
67
68 port@0 {
69 reg = <0>;
70
71 pmic_glink_hs_in: endpoint {
72 remote-endpoint = <&usb_1_dwc3_hs>;
73 };
74 };
75
76 port@1 {
77 reg = <1>;
78
79 pmic_glink_ss_in: endpoint {
80 remote-endpoint = <&usb_1_dwc3_ss>;
81 };
82 };
83 };
84 };
85 };
86
87 vph_pwr: vph-pwr-regulator {
88 compatible = "regulator-fixed";
89
90 regulator-name = "vph_pwr";
91 regulator-min-microvolt = <3700000>;
92 regulator-max-microvolt = <3700000>;
93
94 regulator-always-on;
95 regulator-boot-on;
96 };
97};
98
99&apps_rsc {
100 regulators-0 {
101 compatible = "qcom,pm8550-rpmh-regulators";
102
103 vdd-bob1-supply = <&vph_pwr>;
104 vdd-bob2-supply = <&vph_pwr>;
105 vdd-l2-l13-l14-supply = <&vreg_bob1>;
106 vdd-l3-supply = <&vreg_s1c_1p2>;
107 vdd-l5-l16-supply = <&vreg_bob1>;
108 vdd-l6-l7-supply = <&vreg_bob1>;
109 vdd-l8-l9-supply = <&vreg_bob1>;
110 vdd-l11-supply = <&vreg_s1c_1p2>;
111 vdd-l12-supply = <&vreg_s6c_1p8>;
112 vdd-l15-supply = <&vreg_s6c_1p8>;
113 vdd-l17-supply = <&vreg_bob2>;
114
115 qcom,pmic-id = "b";
116
117 vreg_bob1: bob1 {
118 regulator-name = "vreg_bob1";
119 regulator-min-microvolt = <3296000>;
120 regulator-max-microvolt = <3960000>;
121 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
122 };
123
124 vreg_bob2: bob2 {
125 regulator-name = "vreg_bob2";
126 regulator-min-microvolt = <2720000>;
127 regulator-max-microvolt = <3008000>;
128 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
129 };
130
131 vreg_l2b_3p0: ldo2 {
132 regulator-name = "vreg_l2b_3p0";
133 regulator-min-microvolt = <3008000>;
134 regulator-max-microvolt = <3008000>;
135 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
136 regulator-allow-set-load;
137 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
138 RPMH_REGULATOR_MODE_HPM>;
139 };
140
141 vreg_l5b_3p1: ldo5 {
142 regulator-name = "vreg_l5b_3p1";
143 regulator-min-microvolt = <3104000>;
144 regulator-max-microvolt = <3104000>;
145 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
146 regulator-allow-set-load;
147 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
148 RPMH_REGULATOR_MODE_HPM>;
149 };
150
151 vreg_l6b_1p8: ldo6 {
152 regulator-name = "vreg_l6b_1p8";
153 regulator-min-microvolt = <1800000>;
154 regulator-max-microvolt = <3008000>;
155 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
156 regulator-allow-set-load;
157 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
158 RPMH_REGULATOR_MODE_HPM>;
159 };
160
161 vreg_l7b_1p8: ldo7 {
162 regulator-name = "vreg_l7b_1p8";
163 regulator-min-microvolt = <1800000>;
164 regulator-max-microvolt = <3008000>;
165 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
166 };
167
168 vreg_l8b_1p8: ldo8 {
169 regulator-name = "vreg_l8b_1p8";
170 regulator-min-microvolt = <1800000>;
171 regulator-max-microvolt = <3008000>;
172 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
173 regulator-allow-set-load;
174 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
175 RPMH_REGULATOR_MODE_HPM>;
176 };
177
178 vreg_l11b_1p2: ldo11 {
179 regulator-name = "vreg_l11b_1p2";
180 regulator-min-microvolt = <1200000>;
181 regulator-max-microvolt = <1504000>;
182 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
183 regulator-allow-set-load;
184 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
185 RPMH_REGULATOR_MODE_HPM>;
186 };
187
188 vreg_l12b_1p8: ldo12 {
189 regulator-name = "vreg_l12b_1p8";
190 regulator-min-microvolt = <1800000>;
191 regulator-max-microvolt = <1800000>;
192 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
193 regulator-allow-set-load;
194 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
195 RPMH_REGULATOR_MODE_HPM>;
196 };
197
198 vreg_l13b_3p0: ldo13 {
199 regulator-name = "vreg_l13b_3p0";
200 regulator-min-microvolt = <3000000>;
201 regulator-max-microvolt = <3000000>;
202 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
203 regulator-allow-set-load;
204 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
205 RPMH_REGULATOR_MODE_HPM>;
206 };
207
208 vreg_l14b_3p2: ldo14 {
209 regulator-name = "vreg_l14b_3p2";
210 regulator-min-microvolt = <3200000>;
211 regulator-max-microvolt = <3200000>;
212 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
213 regulator-allow-set-load;
214 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
215 RPMH_REGULATOR_MODE_HPM>;
216 };
217
218 vreg_l15b_1p8: ldo15 {
219 regulator-name = "vreg_l15b_1p8";
220 regulator-min-microvolt = <1800000>;
221 regulator-max-microvolt = <1800000>;
222 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
223 regulator-allow-set-load;
224 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
225 RPMH_REGULATOR_MODE_HPM>;
226 };
227
228 vreg_l16b_2p8: ldo16 {
229 regulator-name = "vreg_l16b_2p8";
230 regulator-min-microvolt = <2800000>;
231 regulator-max-microvolt = <2800000>;
232 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
233 regulator-allow-set-load;
234 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
235 RPMH_REGULATOR_MODE_HPM>;
236 };
237
238 vreg_l17b_2p5: ldo17 {
239 regulator-name = "vreg_l17b_2p5";
240 regulator-min-microvolt = <2504000>;
241 regulator-max-microvolt = <2504000>;
242 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
243 regulator-allow-set-load;
244 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
245 RPMH_REGULATOR_MODE_HPM>;
246 };
247 };
248
249 regulators-1 {
250 compatible = "qcom,pm8550vs-rpmh-regulators";
251
252 vdd-l1-supply = <&vreg_s1c_1p2>;
253 vdd-l2-supply = <&vreg_s1c_1p2>;
254 vdd-l3-supply = <&vreg_s1c_1p2>;
255 vdd-s1-supply = <&vph_pwr>;
256 vdd-s2-supply = <&vph_pwr>;
257 vdd-s3-supply = <&vph_pwr>;
258 vdd-s4-supply = <&vph_pwr>;
259 vdd-s5-supply = <&vph_pwr>;
260 vdd-s6-supply = <&vph_pwr>;
261
262 qcom,pmic-id = "c";
263
264 vreg_s1c_1p2: smps1 {
265 regulator-name = "vreg_s1c_1p2";
266 regulator-min-microvolt = <1256000>;
267 regulator-max-microvolt = <1348000>;
268 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
269 };
270
271 vreg_s2c_0p8: smps2 {
272 regulator-name = "vreg_s2c_0p8";
273 regulator-min-microvolt = <852000>;
274 regulator-max-microvolt = <1036000>;
275 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
276 };
277
278 vreg_s3c_0p9: smps3 {
279 regulator-name = "vreg_s3c_0p9";
280 regulator-min-microvolt = <976000>;
281 regulator-max-microvolt = <1064000>;
282 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
283 };
284
285 vreg_s4c_1p2: smps4 {
286 regulator-name = "vreg_s4c_1p2";
287 regulator-min-microvolt = <1224000>;
288 regulator-max-microvolt = <1280000>;
289 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
290 };
291
292 vreg_s5c_0p7: smps5 {
293 regulator-name = "vreg_s5c_0p7";
294 regulator-min-microvolt = <752000>;
295 regulator-max-microvolt = <900000>;
296 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
297 };
298
299 vreg_s6c_1p8: smps6 {
300 regulator-name = "vreg_s6c_1p8";
301 regulator-min-microvolt = <1856000>;
302 regulator-max-microvolt = <2000000>;
303 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
304 };
305
306 vreg_l1c_1p2: ldo1 {
307 regulator-name = "vreg_l1c_1p2";
308 regulator-min-microvolt = <1200000>;
309 regulator-max-microvolt = <1200000>;
310 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
311 regulator-allow-set-load;
312 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
313 RPMH_REGULATOR_MODE_HPM>;
314 };
315
316 vreg_l3c_1p2: ldo3 {
317 regulator-name = "vreg_l3c_1p2";
318 regulator-min-microvolt = <1200000>;
319 regulator-max-microvolt = <1200000>;
320 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
321 regulator-allow-set-load;
322 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
323 RPMH_REGULATOR_MODE_HPM>;
324 };
325 };
326
327 regulators-2 {
328 compatible = "qcom,pm8550vs-rpmh-regulators";
329
330 vdd-l1-supply = <&vreg_s3c_0p9>;
331
332 qcom,pmic-id = "d";
333
334 vreg_l1d_0p88: ldo1 {
335 regulator-name = "vreg_l1d_0p88";
336 regulator-min-microvolt = <912000>;
337 regulator-max-microvolt = <920000>;
338 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
339 regulator-allow-set-load;
340 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
341 RPMH_REGULATOR_MODE_HPM>;
342 };
343 };
344
345 regulators-3 {
346 compatible = "qcom,pm8550vs-rpmh-regulators";
347
348 vdd-l3-supply = <&vreg_s3c_0p9>;
349
350 qcom,pmic-id = "e";
351
352 vreg_l3e_0p9: ldo3 {
353 regulator-name = "vreg_l3e_0p9";
354 regulator-min-microvolt = <880000>;
355 regulator-max-microvolt = <920000>;
356 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
357 regulator-allow-set-load;
358 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
359 RPMH_REGULATOR_MODE_HPM>;
360 };
361 };
362
363 regulators-4 {
364 compatible = "qcom,pm8550vs-rpmh-regulators";
365
366 vdd-l1-supply = <&vreg_s3c_0p9>;
367 vdd-l3-supply = <&vreg_s3c_0p9>;
368
369 qcom,pmic-id = "g";
370
371 vreg_l1g_0p91: ldo1 {
372 regulator-name = "vreg_l1g_0p91";
373 regulator-min-microvolt = <912000>;
374 regulator-max-microvolt = <920000>;
375 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
376 regulator-allow-set-load;
377 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
378 RPMH_REGULATOR_MODE_HPM>;
379 };
380
381 vreg_l3g_0p91: ldo3 {
382 regulator-name = "vreg_l3g_0p91";
383 regulator-min-microvolt = <880000>;
384 regulator-max-microvolt = <912000>;
385 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
386 regulator-allow-set-load;
387 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
388 RPMH_REGULATOR_MODE_HPM>;
389 };
390 };
391
392 regulators-5 {
393 compatible = "qcom,pm8550ve-rpmh-regulators";
394
395 vdd-l1-supply = <&vreg_s3c_0p9>;
396 vdd-l2-supply = <&vreg_s3c_0p9>;
397 vdd-l3-supply = <&vreg_s1c_1p2>;
398 vdd-s4-supply = <&vph_pwr>;
399
400 qcom,pmic-id = "i";
401
402 vreg_s4i_0p85: smps4 {
403 regulator-name = "vreg_s4i_0p85";
404 regulator-min-microvolt = <852000>;
405 regulator-max-microvolt = <1004000>;
406 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
407 };
408
409 vreg_l1i_0p88: ldo1 {
410 regulator-name = "vreg_l1i_0p88";
411 regulator-min-microvolt = <880000>;
412 regulator-max-microvolt = <912000>;
413 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
414 regulator-allow-set-load;
415 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
416 RPMH_REGULATOR_MODE_HPM>;
417 };
418
419 vreg_l2i_0p88: ldo2 {
420 regulator-name = "vreg_l2i_0p88";
421 regulator-min-microvolt = <880000>;
422 regulator-max-microvolt = <912000>;
423 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
424 regulator-allow-set-load;
425 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
426 RPMH_REGULATOR_MODE_HPM>;
427 };
428
429 vreg_l3i_1p2: ldo3 {
430 regulator-name = "vreg_l3i_0p91";
431 regulator-min-microvolt = <1200000>;
432 regulator-max-microvolt = <1200000>;
433 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
434 regulator-allow-set-load;
435 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
436 RPMH_REGULATOR_MODE_HPM>;
437 };
438 };
439};
440
441&dispcc {
442 status = "okay";
443};
444
445&gpi_dma1 {
446 status = "okay";
447};
448
449&ipa {
450 qcom,gsi-loader = "self";
451 memory-region = <&ipa_fw_mem>;
452 firmware-name = "qcom/sm8650/ipa_fws.mbn";
453 status = "okay";
454};
455
456&mdss {
457 status = "okay";
458};
459
460&mdss_dsi0 {
461 vdda-supply = <&vreg_l3i_1p2>;
462
463 status = "okay";
464
465 panel@0 {
466 compatible = "visionox,vtdr6130";
467 reg = <0>;
468
469 reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
470
471 vddio-supply = <&vreg_l12b_1p8>;
472 vci-supply = <&vreg_l13b_3p0>;
473 vdd-supply = <&vreg_l11b_1p2>;
474
475 pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
476 pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
477 pinctrl-names = "default", "sleep";
478
479 port {
480 panel0_in: endpoint {
481 remote-endpoint = <&mdss_dsi0_out>;
482 };
483 };
484 };
485};
486
487&mdss_dsi0_out {
488 remote-endpoint = <&panel0_in>;
489 data-lanes = <0 1 2 3>;
490};
491
492&mdss_dsi0_phy {
493 vdds-supply = <&vreg_l1i_0p88>;
494
495 status = "okay";
496};
497
498&mdss_mdp {
499 status = "okay";
500};
501
502&pcie_1_phy_aux_clk {
503 clock-frequency = <1000>;
504};
505
506&pcie0 {
507 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
508 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
509
510 pinctrl-0 = <&pcie0_default_state>;
511 pinctrl-names = "default";
512
513 status = "okay";
514};
515
516&pcie0_phy {
517 vdda-phy-supply = <&vreg_l1i_0p88>;
518 vdda-pll-supply = <&vreg_l3i_1p2>;
519
520 status = "okay";
521};
522
523&pon_pwrkey {
524 status = "okay";
525};
526
527&pon_resin {
528 linux,code = <KEY_VOLUMEDOWN>;
529
530 status = "okay";
531};
532
533&pm8550_flash {
534 status = "okay";
535
536 led-0 {
537 function = LED_FUNCTION_FLASH;
538 color = <LED_COLOR_ID_YELLOW>;
539 led-sources = <1>, <4>;
540 led-max-microamp = <500000>;
541 flash-max-microamp = <2000000>;
542 flash-max-timeout-us = <1280000>;
543 function-enumerator = <0>;
544 };
545
546 led-1 {
547 function = LED_FUNCTION_FLASH;
548 color = <LED_COLOR_ID_WHITE>;
549 led-sources = <2>, <3>;
550 led-max-microamp = <500000>;
551 flash-max-microamp = <2000000>;
552 flash-max-timeout-us = <1280000>;
553 function-enumerator = <1>;
554 };
555};
556
557&pm8550_gpios {
558 volume_up_n: volume-up-n-state {
559 pins = "gpio6";
560 function = "normal";
561 bias-pull-up;
562 input-enable;
563 power-source = <1>;
564 };
565};
566
567&pm8550_pwm {
568 status = "okay";
569
570 multi-led {
571 color = <LED_COLOR_ID_RGB>;
572 function = LED_FUNCTION_STATUS;
573
574 #address-cells = <1>;
575 #size-cells = <0>;
576
577 led@1 {
578 reg = <1>;
579 color = <LED_COLOR_ID_RED>;
580 };
581
582 led@2 {
583 reg = <2>;
584 color = <LED_COLOR_ID_GREEN>;
585 };
586
587 led@3 {
588 reg = <3>;
589 color = <LED_COLOR_ID_BLUE>;
590 };
591 };
592};
593
594&pm8550b_eusb2_repeater {
595 vdd18-supply = <&vreg_l15b_1p8>;
596 vdd3-supply = <&vreg_l5b_3p1>;
597};
598
599&pmk8550_rtc {
600 status = "okay";
601};
602
603&qupv3_id_0 {
604 status = "okay";
605};
606
607&qupv3_id_1 {
608 status = "okay";
609};
610
611&remoteproc_adsp {
612 firmware-name = "qcom/sm8650/adsp.mbn",
613 "qcom/sm8650/adsp_dtb.mbn";
614
615 status = "okay";
616};
617
618&remoteproc_cdsp {
619 firmware-name = "qcom/sm8650/cdsp.mbn",
620 "qcom/sm8650/cdsp_dtb.mbn";
621
622 status = "okay";
623};
624
625&remoteproc_mpss {
626 firmware-name = "qcom/sm8650/modem.mbn",
627 "qcom/sm8650/modem_dtb.mbn";
628
629 status = "okay";
630};
631
632&sleep_clk {
633 clock-frequency = <32000>;
634};
635
636&spi4 {
637 status = "okay";
638
639 touchscreen@0 {
640 compatible = "goodix,gt9916";
641 reg = <0>;
642
643 interrupt-parent = <&tlmm>;
644 interrupts = <162 IRQ_TYPE_LEVEL_LOW>;
645
646 reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>;
647
648 avdd-supply = <&vreg_l14b_3p2>;
649
650 spi-max-frequency = <1000000>;
651
652 touchscreen-size-x = <1080>;
653 touchscreen-size-y = <2400>;
654
655 pinctrl-0 = <&ts_irq>, <&ts_reset>;
656 pinctrl-names = "default";
657 };
658};
659
660&tlmm {
661 /* Reserved I/Os for NFC */
662 gpio-reserved-ranges = <32 8>, <74 1>;
663
664 bt_default: bt-default-state {
665 bt-en-pins {
666 pins = "gpio17";
667 function = "gpio";
668 drive-strength = <16>;
669 bias-disable;
670 };
671
672 sw-ctrl-pins {
673 pins = "gpio18";
674 function = "gpio";
675 bias-pull-down;
676 };
677 };
678
679 disp0_reset_n_active: disp0-reset-n-active-state {
680 pins = "gpio133";
681 function = "gpio";
682 drive-strength = <8>;
683 bias-disable;
684 };
685
686 disp0_reset_n_suspend: disp0-reset-n-suspend-state {
687 pins = "gpio133";
688 function = "gpio";
689 drive-strength = <2>;
690 bias-pull-down;
691 };
692
693 mdp_vsync_active: mdp-vsync-active-state {
694 pins = "gpio86";
695 function = "mdp_vsync";
696 drive-strength = <2>;
697 bias-pull-down;
698 };
699
700 mdp_vsync_suspend: mdp-vsync-suspend-state {
701 pins = "gpio86";
702 function = "mdp_vsync";
703 drive-strength = <2>;
704 bias-pull-down;
705 };
706
707 ts_irq: ts-irq-state {
708 pins = "gpio161";
709 function = "gpio";
710 drive-strength = <8>;
711 bias-pull-up;
712 output-disable;
713 };
714
715 ts_reset: ts-reset-state {
716 pins = "gpio162";
717 function = "gpio";
718 drive-strength = <8>;
719 bias-pull-up;
720 };
721};
722
723&uart14 {
724 status = "okay";
725
726 bluetooth {
727 compatible = "qcom,wcn7850-bt";
728
729 clocks = <&rpmhcc RPMH_RF_CLK1>;
730
731 vddio-supply = <&vreg_l3c_1p2>;
732 vddaon-supply = <&vreg_l15b_1p8>;
733 vdddig-supply = <&vreg_s3c_0p9>;
734 vddrfa0p8-supply = <&vreg_s3c_0p9>;
735 vddrfa1p2-supply = <&vreg_s1c_1p2>;
736 vddrfa1p9-supply = <&vreg_s6c_1p8>;
737
738 max-speed = <3200000>;
739
740 enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
741 swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
742
743 pinctrl-0 = <&bt_default>;
744 pinctrl-names = "default";
745 };
746};
747
748&uart15 {
749 status = "okay";
750};
751
752&ufs_mem_hc {
753 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
754
755 vcc-supply = <&vreg_l17b_2p5>;
756 vcc-max-microamp = <1300000>;
757 vccq-supply = <&vreg_l1c_1p2>;
758 vccq-max-microamp = <1200000>;
759
760 status = "okay";
761};
762
763&ufs_mem_phy {
764 vdda-phy-supply = <&vreg_l1d_0p88>;
765 vdda-pll-supply = <&vreg_l3i_1p2>;
766
767 status = "okay";
768};
769
770/*
771 * DPAUX -> WCD9395 -> USB_SBU -> USB-C
772 * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C
773 * USB SS -> NB7VPQ904MMUTWG -> USB-C
774 */
775
776&usb_1 {
777 status = "okay";
778};
779
780&usb_1_dwc3 {
781 dr_mode = "otg";
782 usb-role-switch;
783};
784
785&usb_1_dwc3_hs {
786 remote-endpoint = <&pmic_glink_hs_in>;
787};
788
789&usb_1_dwc3_ss {
790 remote-endpoint = <&pmic_glink_ss_in>;
791};
792
793&usb_1_hsphy {
794 vdd-supply = <&vreg_l1i_0p88>;
795 vdda12-supply = <&vreg_l3i_1p2>;
796
797 phys = <&pm8550b_eusb2_repeater>;
798
799 status = "okay";
800};
801
802&usb_dp_qmpphy {
803 vdda-phy-supply = <&vreg_l3i_1p2>;
804 vdda-pll-supply = <&vreg_l3g_0p91>;
805
806 status = "okay";
807};
808
809&xo_board {
810 clock-frequency = <76800000>;
811};