Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 6bb92fcf7d2fea2314d616e5e2391a8bf2b0fdfa / . / src / arm64 / qcom / sm8650-qrd.dts
blob: b07cac2e5bc802ba667d054eb923b8b0e1bc0d46 [file] [log] [blame]
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2023, Linaro Limited
4 */
5
6/dts-v1/;
7
8#include <dt-bindings/leds/common.h>
9#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
10#include "sm8650.dtsi"
11#include "pm8010.dtsi"
12#include "pm8550.dtsi"
13#include "pm8550b.dtsi"
14#define PMK8550VE_SID 8
15#include "pm8550ve.dtsi"
16#include "pm8550vs.dtsi"
17#include "pmk8550.dtsi"
18#include "pmr735d_a.dtsi"
19
20/ {
21 model = "Qualcomm Technologies, Inc. SM8650 QRD";
22 compatible = "qcom,sm8650-qrd", "qcom,sm8650";
23
24 aliases {
25 serial0 = &uart15;
26 serial1 = &uart14;
27 };
28
29 chosen {
30 stdout-path = "serial0:115200n8";
31 };
32
33 gpio-keys {
34 compatible = "gpio-keys";
35
36 pinctrl-0 = <&volume_up_n>;
37 pinctrl-names = "default";
38
39 key-volume-up {
40 label = "Volume Up";
41 linux,code = <KEY_VOLUMEUP>;
42 gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
43 debounce-interval = <15>;
44 linux,can-disable;
45 wakeup-source;
46 };
47 };
48
49 pmic-glink {
50 compatible = "qcom,sm8650-pmic-glink",
51 "qcom,sm8550-pmic-glink",
52 "qcom,pmic-glink";
53 #address-cells = <1>;
54 #size-cells = <0>;
55 orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
56
57 connector@0 {
58 compatible = "usb-c-connector";
59 reg = <0>;
60
61 power-role = "dual";
62 data-role = "dual";
63
64 ports {
65 #address-cells = <1>;
66 #size-cells = <0>;
67
68 port@0 {
69 reg = <0>;
70
71 pmic_glink_hs_in: endpoint {
72 remote-endpoint = <&usb_1_dwc3_hs>;
73 };
74 };
75
76 port@1 {
77 reg = <1>;
78
79 pmic_glink_ss_in: endpoint {
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame^]80 remote-endpoint = <&redriver_ss_out>;
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]81 };
82 };
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame^]83
84 port@2 {
85 reg = <2>;
86
87 pmic_glink_sbu: endpoint {
88 remote-endpoint = <&wcd_usbss_sbu_mux>;
89 };
90 };
91 };
92 };
93 };
94
95 sound {
96 compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard";
97 model = "SM8650-QRD";
98 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
99 "SpkrRight IN", "WSA_SPK2 OUT",
100 "IN1_HPHL", "HPHL_OUT",
101 "IN2_HPHR", "HPHR_OUT",
102 "AMIC1", "MIC BIAS1",
103 "AMIC2", "MIC BIAS2",
104 "AMIC3", "MIC BIAS3",
105 "AMIC4", "MIC BIAS3",
106 "AMIC5", "MIC BIAS4",
107 "TX SWR_INPUT0", "ADC1_OUTPUT",
108 "TX SWR_INPUT1", "ADC2_OUTPUT",
109 "TX SWR_INPUT2", "ADC3_OUTPUT",
110 "TX SWR_INPUT3", "ADC4_OUTPUT";
111
112 wcd-playback-dai-link {
113 link-name = "WCD Playback";
114
115 cpu {
116 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
117 };
118
119 codec {
120 sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
121 };
122
123 platform {
124 sound-dai = <&q6apm>;
125 };
126 };
127
128 wcd-capture-dai-link {
129 link-name = "WCD Capture";
130
131 cpu {
132 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
133 };
134
135 codec {
136 sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>;
137 };
138
139 platform {
140 sound-dai = <&q6apm>;
141 };
142 };
143
144 wsa-dai-link {
145 link-name = "WSA Playback";
146
147 cpu {
148 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
149 };
150
151 codec {
152 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
153 };
154
155 platform {
156 sound-dai = <&q6apm>;
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]157 };
158 };
159 };
160
161 vph_pwr: vph-pwr-regulator {
162 compatible = "regulator-fixed";
163
164 regulator-name = "vph_pwr";
165 regulator-min-microvolt = <3700000>;
166 regulator-max-microvolt = <3700000>;
167
168 regulator-always-on;
169 regulator-boot-on;
170 };
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame^]171
172 wcd939x: audio-codec {
173 compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec";
174
175 pinctrl-0 = <&wcd_default>;
176 pinctrl-names = "default";
177
178 qcom,micbias1-microvolt = <1800000>;
179 qcom,micbias2-microvolt = <1800000>;
180 qcom,micbias3-microvolt = <1800000>;
181 qcom,micbias4-microvolt = <1800000>;
182 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
183 qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
184 qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
185 qcom,rx-device = <&wcd_rx>;
186 qcom,tx-device = <&wcd_tx>;
187
188 reset-gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
189
190 vdd-buck-supply = <&vreg_l15b_1p8>;
191 vdd-rxtx-supply = <&vreg_l15b_1p8>;
192 vdd-io-supply = <&vreg_l15b_1p8>;
193 vdd-mic-bias-supply = <&vreg_bob1>;
194
195 #sound-dai-cells = <1>;
196
197 mode-switch;
198 orientation-switch;
199
200 port {
201 wcd_codec_headset_in: endpoint {
202 remote-endpoint = <&wcd_usbss_headset_out>;
203 };
204 };
205 };
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]206};
207
208&apps_rsc {
209 regulators-0 {
210 compatible = "qcom,pm8550-rpmh-regulators";
211
212 vdd-bob1-supply = <&vph_pwr>;
213 vdd-bob2-supply = <&vph_pwr>;
214 vdd-l2-l13-l14-supply = <&vreg_bob1>;
215 vdd-l3-supply = <&vreg_s1c_1p2>;
216 vdd-l5-l16-supply = <&vreg_bob1>;
217 vdd-l6-l7-supply = <&vreg_bob1>;
218 vdd-l8-l9-supply = <&vreg_bob1>;
219 vdd-l11-supply = <&vreg_s1c_1p2>;
220 vdd-l12-supply = <&vreg_s6c_1p8>;
221 vdd-l15-supply = <&vreg_s6c_1p8>;
222 vdd-l17-supply = <&vreg_bob2>;
223
224 qcom,pmic-id = "b";
225
226 vreg_bob1: bob1 {
227 regulator-name = "vreg_bob1";
228 regulator-min-microvolt = <3296000>;
229 regulator-max-microvolt = <3960000>;
230 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
231 };
232
233 vreg_bob2: bob2 {
234 regulator-name = "vreg_bob2";
235 regulator-min-microvolt = <2720000>;
236 regulator-max-microvolt = <3008000>;
237 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
238 };
239
240 vreg_l2b_3p0: ldo2 {
241 regulator-name = "vreg_l2b_3p0";
242 regulator-min-microvolt = <3008000>;
243 regulator-max-microvolt = <3008000>;
244 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
245 regulator-allow-set-load;
246 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
247 RPMH_REGULATOR_MODE_HPM>;
248 };
249
250 vreg_l5b_3p1: ldo5 {
251 regulator-name = "vreg_l5b_3p1";
252 regulator-min-microvolt = <3104000>;
253 regulator-max-microvolt = <3104000>;
254 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
255 regulator-allow-set-load;
256 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
257 RPMH_REGULATOR_MODE_HPM>;
258 };
259
260 vreg_l6b_1p8: ldo6 {
261 regulator-name = "vreg_l6b_1p8";
262 regulator-min-microvolt = <1800000>;
263 regulator-max-microvolt = <3008000>;
264 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
265 regulator-allow-set-load;
266 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
267 RPMH_REGULATOR_MODE_HPM>;
268 };
269
270 vreg_l7b_1p8: ldo7 {
271 regulator-name = "vreg_l7b_1p8";
272 regulator-min-microvolt = <1800000>;
273 regulator-max-microvolt = <3008000>;
274 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
275 };
276
277 vreg_l8b_1p8: ldo8 {
278 regulator-name = "vreg_l8b_1p8";
279 regulator-min-microvolt = <1800000>;
280 regulator-max-microvolt = <3008000>;
281 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
282 regulator-allow-set-load;
283 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
284 RPMH_REGULATOR_MODE_HPM>;
285 };
286
287 vreg_l11b_1p2: ldo11 {
288 regulator-name = "vreg_l11b_1p2";
289 regulator-min-microvolt = <1200000>;
290 regulator-max-microvolt = <1504000>;
291 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
292 regulator-allow-set-load;
293 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
294 RPMH_REGULATOR_MODE_HPM>;
295 };
296
297 vreg_l12b_1p8: ldo12 {
298 regulator-name = "vreg_l12b_1p8";
299 regulator-min-microvolt = <1800000>;
300 regulator-max-microvolt = <1800000>;
301 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
302 regulator-allow-set-load;
303 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
304 RPMH_REGULATOR_MODE_HPM>;
305 };
306
307 vreg_l13b_3p0: ldo13 {
308 regulator-name = "vreg_l13b_3p0";
309 regulator-min-microvolt = <3000000>;
310 regulator-max-microvolt = <3000000>;
311 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
312 regulator-allow-set-load;
313 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
314 RPMH_REGULATOR_MODE_HPM>;
315 };
316
317 vreg_l14b_3p2: ldo14 {
318 regulator-name = "vreg_l14b_3p2";
319 regulator-min-microvolt = <3200000>;
320 regulator-max-microvolt = <3200000>;
321 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
322 regulator-allow-set-load;
323 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
324 RPMH_REGULATOR_MODE_HPM>;
325 };
326
327 vreg_l15b_1p8: ldo15 {
328 regulator-name = "vreg_l15b_1p8";
329 regulator-min-microvolt = <1800000>;
330 regulator-max-microvolt = <1800000>;
331 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
332 regulator-allow-set-load;
333 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
334 RPMH_REGULATOR_MODE_HPM>;
335 };
336
337 vreg_l16b_2p8: ldo16 {
338 regulator-name = "vreg_l16b_2p8";
339 regulator-min-microvolt = <2800000>;
340 regulator-max-microvolt = <2800000>;
341 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
342 regulator-allow-set-load;
343 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
344 RPMH_REGULATOR_MODE_HPM>;
345 };
346
347 vreg_l17b_2p5: ldo17 {
348 regulator-name = "vreg_l17b_2p5";
349 regulator-min-microvolt = <2504000>;
350 regulator-max-microvolt = <2504000>;
351 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
352 regulator-allow-set-load;
353 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
354 RPMH_REGULATOR_MODE_HPM>;
355 };
356 };
357
358 regulators-1 {
359 compatible = "qcom,pm8550vs-rpmh-regulators";
360
361 vdd-l1-supply = <&vreg_s1c_1p2>;
362 vdd-l2-supply = <&vreg_s1c_1p2>;
363 vdd-l3-supply = <&vreg_s1c_1p2>;
364 vdd-s1-supply = <&vph_pwr>;
365 vdd-s2-supply = <&vph_pwr>;
366 vdd-s3-supply = <&vph_pwr>;
367 vdd-s4-supply = <&vph_pwr>;
368 vdd-s5-supply = <&vph_pwr>;
369 vdd-s6-supply = <&vph_pwr>;
370
371 qcom,pmic-id = "c";
372
373 vreg_s1c_1p2: smps1 {
374 regulator-name = "vreg_s1c_1p2";
375 regulator-min-microvolt = <1256000>;
376 regulator-max-microvolt = <1348000>;
377 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
378 };
379
380 vreg_s2c_0p8: smps2 {
381 regulator-name = "vreg_s2c_0p8";
382 regulator-min-microvolt = <852000>;
383 regulator-max-microvolt = <1036000>;
384 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
385 };
386
387 vreg_s3c_0p9: smps3 {
388 regulator-name = "vreg_s3c_0p9";
389 regulator-min-microvolt = <976000>;
390 regulator-max-microvolt = <1064000>;
391 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
392 };
393
394 vreg_s4c_1p2: smps4 {
395 regulator-name = "vreg_s4c_1p2";
396 regulator-min-microvolt = <1224000>;
397 regulator-max-microvolt = <1280000>;
398 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
399 };
400
401 vreg_s5c_0p7: smps5 {
402 regulator-name = "vreg_s5c_0p7";
403 regulator-min-microvolt = <752000>;
404 regulator-max-microvolt = <900000>;
405 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
406 };
407
408 vreg_s6c_1p8: smps6 {
409 regulator-name = "vreg_s6c_1p8";
410 regulator-min-microvolt = <1856000>;
411 regulator-max-microvolt = <2000000>;
412 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
413 };
414
415 vreg_l1c_1p2: ldo1 {
416 regulator-name = "vreg_l1c_1p2";
417 regulator-min-microvolt = <1200000>;
418 regulator-max-microvolt = <1200000>;
419 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
420 regulator-allow-set-load;
421 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
422 RPMH_REGULATOR_MODE_HPM>;
423 };
424
425 vreg_l3c_1p2: ldo3 {
426 regulator-name = "vreg_l3c_1p2";
427 regulator-min-microvolt = <1200000>;
428 regulator-max-microvolt = <1200000>;
429 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
430 regulator-allow-set-load;
431 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
432 RPMH_REGULATOR_MODE_HPM>;
433 };
434 };
435
436 regulators-2 {
437 compatible = "qcom,pm8550vs-rpmh-regulators";
438
439 vdd-l1-supply = <&vreg_s3c_0p9>;
440
441 qcom,pmic-id = "d";
442
443 vreg_l1d_0p88: ldo1 {
444 regulator-name = "vreg_l1d_0p88";
445 regulator-min-microvolt = <912000>;
446 regulator-max-microvolt = <920000>;
447 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
448 regulator-allow-set-load;
449 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
450 RPMH_REGULATOR_MODE_HPM>;
451 };
452 };
453
454 regulators-3 {
455 compatible = "qcom,pm8550vs-rpmh-regulators";
456
457 vdd-l3-supply = <&vreg_s3c_0p9>;
458
459 qcom,pmic-id = "e";
460
461 vreg_l3e_0p9: ldo3 {
462 regulator-name = "vreg_l3e_0p9";
463 regulator-min-microvolt = <880000>;
464 regulator-max-microvolt = <920000>;
465 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
466 regulator-allow-set-load;
467 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
468 RPMH_REGULATOR_MODE_HPM>;
469 };
470 };
471
472 regulators-4 {
473 compatible = "qcom,pm8550vs-rpmh-regulators";
474
475 vdd-l1-supply = <&vreg_s3c_0p9>;
476 vdd-l3-supply = <&vreg_s3c_0p9>;
477
478 qcom,pmic-id = "g";
479
480 vreg_l1g_0p91: ldo1 {
481 regulator-name = "vreg_l1g_0p91";
482 regulator-min-microvolt = <912000>;
483 regulator-max-microvolt = <920000>;
484 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
485 regulator-allow-set-load;
486 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
487 RPMH_REGULATOR_MODE_HPM>;
488 };
489
490 vreg_l3g_0p91: ldo3 {
491 regulator-name = "vreg_l3g_0p91";
492 regulator-min-microvolt = <880000>;
493 regulator-max-microvolt = <912000>;
494 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
495 regulator-allow-set-load;
496 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
497 RPMH_REGULATOR_MODE_HPM>;
498 };
499 };
500
501 regulators-5 {
502 compatible = "qcom,pm8550ve-rpmh-regulators";
503
504 vdd-l1-supply = <&vreg_s3c_0p9>;
505 vdd-l2-supply = <&vreg_s3c_0p9>;
506 vdd-l3-supply = <&vreg_s1c_1p2>;
507 vdd-s4-supply = <&vph_pwr>;
508
509 qcom,pmic-id = "i";
510
511 vreg_s4i_0p85: smps4 {
512 regulator-name = "vreg_s4i_0p85";
513 regulator-min-microvolt = <852000>;
514 regulator-max-microvolt = <1004000>;
515 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
516 };
517
518 vreg_l1i_0p88: ldo1 {
519 regulator-name = "vreg_l1i_0p88";
520 regulator-min-microvolt = <880000>;
521 regulator-max-microvolt = <912000>;
522 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
523 regulator-allow-set-load;
524 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
525 RPMH_REGULATOR_MODE_HPM>;
526 };
527
528 vreg_l2i_0p88: ldo2 {
529 regulator-name = "vreg_l2i_0p88";
530 regulator-min-microvolt = <880000>;
531 regulator-max-microvolt = <912000>;
532 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
533 regulator-allow-set-load;
534 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
535 RPMH_REGULATOR_MODE_HPM>;
536 };
537
538 vreg_l3i_1p2: ldo3 {
539 regulator-name = "vreg_l3i_0p91";
540 regulator-min-microvolt = <1200000>;
541 regulator-max-microvolt = <1200000>;
542 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
543 regulator-allow-set-load;
544 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
545 RPMH_REGULATOR_MODE_HPM>;
546 };
547 };
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame^]548
549 regulators-6 {
550 compatible = "qcom,pm8010-rpmh-regulators";
551 qcom,pmic-id = "m";
552
553 vdd-l1-l2-supply = <&vreg_s1c_1p2>;
554 vdd-l3-l4-supply = <&vreg_bob2>;
555 vdd-l5-supply = <&vreg_s6c_1p8>;
556 vdd-l6-supply = <&vreg_bob1>;
557 vdd-l7-supply = <&vreg_bob1>;
558
559 vreg_l1m_1p1: ldo1 {
560 regulator-name = "vreg_l1m_1p1";
561 regulator-min-microvolt = <1104000>;
562 regulator-max-microvolt = <1104000>;
563 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
564 regulator-allow-set-load;
565 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
566 RPMH_REGULATOR_MODE_HPM>;
567 };
568
569 vreg_l2m_1p056: ldo2 {
570 regulator-name = "vreg_l2m_1p056";
571 regulator-min-microvolt = <1056000>;
572 regulator-max-microvolt = <1056000>;
573 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
574 regulator-allow-set-load;
575 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
576 RPMH_REGULATOR_MODE_HPM>;
577 };
578
579 vreg_l3m_2p8: ldo3 {
580 regulator-name = "vreg_l3m_2p8";
581 regulator-min-microvolt = <2800000>;
582 regulator-max-microvolt = <2800000>;
583 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
584 };
585
586 vreg_l4m_2p8: ldo4 {
587 regulator-name = "vreg_l4m_2p8";
588 regulator-min-microvolt = <2800000>;
589 regulator-max-microvolt = <2800000>;
590 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
591 };
592
593 vreg_l5m_1p8: ldo5 {
594 regulator-name = "vreg_l5m_1p8";
595 regulator-min-microvolt = <1800000>;
596 regulator-max-microvolt = <1800000>;
597 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
598 };
599
600 vreg_l6m_2p8: ldo6 {
601 regulator-name = "vreg_l6m_2p8";
602 regulator-min-microvolt = <2800000>;
603 regulator-max-microvolt = <2800000>;
604 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
605 };
606
607 vreg_l7m_2p96: ldo7 {
608 regulator-name = "vreg_l7m_2p96";
609 regulator-min-microvolt = <2960000>;
610 regulator-max-microvolt = <2960000>;
611 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
612 };
613 };
614
615 regulators-7 {
616 compatible = "qcom,pm8010-rpmh-regulators";
617 qcom,pmic-id = "n";
618
619 vdd-l1-l2-supply = <&vreg_s1c_1p2>;
620 vdd-l3-l4-supply = <&vreg_s6c_1p8>;
621 vdd-l5-supply = <&vreg_bob2>;
622 vdd-l6-supply = <&vreg_bob2>;
623 vdd-l7-supply = <&vreg_bob1>;
624
625 vreg_l1n_1p1: ldo1 {
626 regulator-name = "vreg_l1n_1p1";
627 regulator-min-microvolt = <1104000>;
628 regulator-max-microvolt = <1104000>;
629 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
630 regulator-allow-set-load;
631 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
632 RPMH_REGULATOR_MODE_HPM>;
633 };
634
635 vreg_l2n_1p056: ldo2 {
636 regulator-name = "vreg_l2n_1p056";
637 regulator-min-microvolt = <1056000>;
638 regulator-max-microvolt = <1056000>;
639 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
640 regulator-allow-set-load;
641 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
642 RPMH_REGULATOR_MODE_HPM>;
643 };
644
645 vreg_l3n_1p8: ldo3 {
646 regulator-name = "vreg_l3n_1p8";
647 regulator-min-microvolt = <1800000>;
648 regulator-max-microvolt = <1800000>;
649 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
650 };
651
652 vreg_l4n_1p8: ldo4 {
653 regulator-name = "vreg_l4n_1p8";
654 regulator-min-microvolt = <1800000>;
655 regulator-max-microvolt = <1800000>;
656 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
657 };
658
659 vreg_l5n_2p8: ldo5 {
660 regulator-name = "vreg_l5n_2p8";
661 regulator-min-microvolt = <2800000>;
662 regulator-max-microvolt = <2800000>;
663 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
664 };
665
666 vreg_l6n_2p8: ldo6 {
667 regulator-name = "vreg_l6n_2p8";
668 regulator-min-microvolt = <2800000>;
669 regulator-max-microvolt = <2800000>;
670 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
671 };
672
673 vreg_l7n_3p3: ldo7 {
674 regulator-name = "vreg_l7n_3p3";
675 regulator-min-microvolt = <3304000>;
676 regulator-max-microvolt = <3304000>;
677 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
678 };
679 };
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]680};
681
682&dispcc {
683 status = "okay";
684};
685
686&gpi_dma1 {
687 status = "okay";
688};
689
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame^]690&i2c3 {
691 status = "okay";
692
693 wcd_usbss: typec-mux@e {
694 compatible = "qcom,wcd9395-usbss", "qcom,wcd9390-usbss";
695 reg = <0xe>;
696
697 vdd-supply = <&vreg_l15b_1p8>;
698 reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>;
699
700 mode-switch;
701 orientation-switch;
702
703 ports {
704 #address-cells = <1>;
705 #size-cells = <0>;
706
707 port@0 {
708 reg = <0>;
709
710 wcd_usbss_sbu_mux: endpoint {
711 remote-endpoint = <&pmic_glink_sbu>;
712 };
713 };
714
715 port@1 {
716 reg = <1>;
717
718 wcd_usbss_headset_out: endpoint {
719 remote-endpoint = <&wcd_codec_headset_in>;
720 };
721 };
722 };
723 };
724};
725
726&i2c6 {
727 status = "okay";
728
729 typec-mux@1c {
730 compatible = "onnn,nb7vpq904m";
731 reg = <0x1c>;
732
733 vcc-supply = <&vreg_l15b_1p8>;
734
735 retimer-switch;
736 orientation-switch;
737
738 ports {
739 #address-cells = <1>;
740 #size-cells = <0>;
741
742 port@0 {
743 reg = <0>;
744
745 redriver_ss_out: endpoint {
746 remote-endpoint = <&pmic_glink_ss_in>;
747 };
748 };
749
750 port@1 {
751 reg = <1>;
752
753 redriver_ss_in: endpoint {
754 data-lanes = <3 2 1 0>;
755 remote-endpoint = <&usb_dp_qmpphy_out>;
756 };
757 };
758 };
759 };
760};
761
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]762&ipa {
763 qcom,gsi-loader = "self";
764 memory-region = <&ipa_fw_mem>;
765 firmware-name = "qcom/sm8650/ipa_fws.mbn";
766 status = "okay";
767};
768
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame^]769&lpass_tlmm {
770 spkr_1_sd_n_active: spkr-1-sd-n-active-state {
771 pins = "gpio21";
772 function = "gpio";
773 drive-strength = <16>;
774 bias-disable;
775 output-low;
776 };
777};
778
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]779&mdss {
780 status = "okay";
781};
782
783&mdss_dsi0 {
784 vdda-supply = <&vreg_l3i_1p2>;
785
786 status = "okay";
787
788 panel@0 {
789 compatible = "visionox,vtdr6130";
790 reg = <0>;
791
792 reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
793
794 vddio-supply = <&vreg_l12b_1p8>;
795 vci-supply = <&vreg_l13b_3p0>;
796 vdd-supply = <&vreg_l11b_1p2>;
797
798 pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
799 pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
800 pinctrl-names = "default", "sleep";
801
802 port {
803 panel0_in: endpoint {
804 remote-endpoint = <&mdss_dsi0_out>;
805 };
806 };
807 };
808};
809
810&mdss_dsi0_out {
811 remote-endpoint = <&panel0_in>;
812 data-lanes = <0 1 2 3>;
813};
814
815&mdss_dsi0_phy {
816 vdds-supply = <&vreg_l1i_0p88>;
817
818 status = "okay";
819};
820
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame^]821&mdss_dp0 {
822 status = "okay";
823};
824
825&mdss_dp0_out {
826 data-lanes = <0 1>;
827 remote-endpoint = <&usb_dp_qmpphy_dp_in>;
828};
829
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]830&mdss_mdp {
831 status = "okay";
832};
833
834&pcie_1_phy_aux_clk {
835 clock-frequency = <1000>;
836};
837
838&pcie0 {
839 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
840 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
841
842 pinctrl-0 = <&pcie0_default_state>;
843 pinctrl-names = "default";
844
845 status = "okay";
846};
847
848&pcie0_phy {
849 vdda-phy-supply = <&vreg_l1i_0p88>;
850 vdda-pll-supply = <&vreg_l3i_1p2>;
851
852 status = "okay";
853};
854
855&pon_pwrkey {
856 status = "okay";
857};
858
859&pon_resin {
860 linux,code = <KEY_VOLUMEDOWN>;
861
862 status = "okay";
863};
864
865&pm8550_flash {
866 status = "okay";
867
868 led-0 {
869 function = LED_FUNCTION_FLASH;
870 color = <LED_COLOR_ID_YELLOW>;
871 led-sources = <1>, <4>;
872 led-max-microamp = <500000>;
873 flash-max-microamp = <2000000>;
874 flash-max-timeout-us = <1280000>;
875 function-enumerator = <0>;
876 };
877
878 led-1 {
879 function = LED_FUNCTION_FLASH;
880 color = <LED_COLOR_ID_WHITE>;
881 led-sources = <2>, <3>;
882 led-max-microamp = <500000>;
883 flash-max-microamp = <2000000>;
884 flash-max-timeout-us = <1280000>;
885 function-enumerator = <1>;
886 };
887};
888
889&pm8550_gpios {
890 volume_up_n: volume-up-n-state {
891 pins = "gpio6";
892 function = "normal";
893 bias-pull-up;
894 input-enable;
895 power-source = <1>;
896 };
897};
898
899&pm8550_pwm {
900 status = "okay";
901
902 multi-led {
903 color = <LED_COLOR_ID_RGB>;
904 function = LED_FUNCTION_STATUS;
905
906 #address-cells = <1>;
907 #size-cells = <0>;
908
909 led@1 {
910 reg = <1>;
911 color = <LED_COLOR_ID_RED>;
912 };
913
914 led@2 {
915 reg = <2>;
916 color = <LED_COLOR_ID_GREEN>;
917 };
918
919 led@3 {
920 reg = <3>;
921 color = <LED_COLOR_ID_BLUE>;
922 };
923 };
924};
925
926&pm8550b_eusb2_repeater {
927 vdd18-supply = <&vreg_l15b_1p8>;
928 vdd3-supply = <&vreg_l5b_3p1>;
929};
930
931&pmk8550_rtc {
932 status = "okay";
933};
934
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame^]935&qup_i2c3_data_clk {
936 /* Use internal I2C pull-up */
937 bias-pull-up = <2200>;
938};
939
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]940&qupv3_id_0 {
941 status = "okay";
942};
943
944&qupv3_id_1 {
945 status = "okay";
946};
947
948&remoteproc_adsp {
949 firmware-name = "qcom/sm8650/adsp.mbn",
950 "qcom/sm8650/adsp_dtb.mbn";
951
952 status = "okay";
953};
954
955&remoteproc_cdsp {
956 firmware-name = "qcom/sm8650/cdsp.mbn",
957 "qcom/sm8650/cdsp_dtb.mbn";
958
959 status = "okay";
960};
961
962&remoteproc_mpss {
963 firmware-name = "qcom/sm8650/modem.mbn",
964 "qcom/sm8650/modem_dtb.mbn";
965
966 status = "okay";
967};
968
969&sleep_clk {
970 clock-frequency = <32000>;
971};
972
973&spi4 {
974 status = "okay";
975
976 touchscreen@0 {
977 compatible = "goodix,gt9916";
978 reg = <0>;
979
980 interrupt-parent = <&tlmm>;
981 interrupts = <162 IRQ_TYPE_LEVEL_LOW>;
982
983 reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>;
984
985 avdd-supply = <&vreg_l14b_3p2>;
986
987 spi-max-frequency = <1000000>;
988
989 touchscreen-size-x = <1080>;
990 touchscreen-size-y = <2400>;
991
992 pinctrl-0 = <&ts_irq>, <&ts_reset>;
993 pinctrl-names = "default";
994 };
995};
996
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame^]997&swr0 {
998 status = "okay";
999
1000 /* WSA8845, Speaker Left */
1001 left_spkr: speaker@0,0 {
1002 compatible = "sdw20217020400";
1003 reg = <0 0>;
1004 pinctrl-0 = <&spkr_1_sd_n_active>;
1005 pinctrl-names = "default";
1006 powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>;
1007 #sound-dai-cells = <0>;
1008 sound-name-prefix = "SpkrLeft";
1009 vdd-1p8-supply = <&vreg_l15b_1p8>;
1010 vdd-io-supply = <&vreg_l3c_1p2>;
1011 };
1012
1013 /* WSA8845, Speaker Right */
1014 right_spkr: speaker@0,1 {
1015 compatible = "sdw20217020400";
1016 reg = <0 1>;
1017 pinctrl-0 = <&spkr_2_sd_n_active>;
1018 pinctrl-names = "default";
1019 powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
1020 #sound-dai-cells = <0>;
1021 sound-name-prefix = "SpkrRight";
1022 vdd-1p8-supply = <&vreg_l15b_1p8>;
1023 vdd-io-supply = <&vreg_l3c_1p2>;
1024 };
1025};
1026
1027&swr1 {
1028 status = "okay";
1029
1030 /* WCD9395 RX */
1031 wcd_rx: codec@0,4 {
1032 compatible = "sdw20217010e00";
1033 reg = <0 4>;
1034
1035 /*
1036 * WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R)
1037 * WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH)
1038 * WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R)
1039 * WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO)
1040 * WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R)
1041 * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R)
1042 */
1043 qcom,rx-port-mapping = <1 2 3 4 5 9>;
1044 };
1045};
1046
1047&swr2 {
1048 status = "okay";
1049
1050 /* WCD9395 TX */
1051 wcd_tx: codec@0,3 {
1052 compatible = "sdw20217010e00";
1053 reg = <0 3>;
1054
1055 /*
1056 * WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
1057 * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
1058 * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7)
1059 * WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11)
1060 */
1061 qcom,tx-port-mapping = <2 2 3 4>;
1062 };
1063};
1064
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]1065&tlmm {
1066 /* Reserved I/Os for NFC */
1067 gpio-reserved-ranges = <32 8>, <74 1>;
1068
1069 bt_default: bt-default-state {
1070 bt-en-pins {
1071 pins = "gpio17";
1072 function = "gpio";
1073 drive-strength = <16>;
1074 bias-disable;
1075 };
1076
1077 sw-ctrl-pins {
1078 pins = "gpio18";
1079 function = "gpio";
1080 bias-pull-down;
1081 };
1082 };
1083
1084 disp0_reset_n_active: disp0-reset-n-active-state {
1085 pins = "gpio133";
1086 function = "gpio";
1087 drive-strength = <8>;
1088 bias-disable;
1089 };
1090
1091 disp0_reset_n_suspend: disp0-reset-n-suspend-state {
1092 pins = "gpio133";
1093 function = "gpio";
1094 drive-strength = <2>;
1095 bias-pull-down;
1096 };
1097
1098 mdp_vsync_active: mdp-vsync-active-state {
1099 pins = "gpio86";
1100 function = "mdp_vsync";
1101 drive-strength = <2>;
1102 bias-pull-down;
1103 };
1104
1105 mdp_vsync_suspend: mdp-vsync-suspend-state {
1106 pins = "gpio86";
1107 function = "mdp_vsync";
1108 drive-strength = <2>;
1109 bias-pull-down;
1110 };
1111
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame^]1112 spkr_2_sd_n_active: spkr-2-sd-n-active-state {
1113 pins = "gpio77";
1114 function = "gpio";
1115 drive-strength = <16>;
1116 bias-disable;
1117 output-low;
1118 };
1119
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]1120 ts_irq: ts-irq-state {
1121 pins = "gpio161";
1122 function = "gpio";
1123 drive-strength = <8>;
1124 bias-pull-up;
1125 output-disable;
1126 };
1127
1128 ts_reset: ts-reset-state {
1129 pins = "gpio162";
1130 function = "gpio";
1131 drive-strength = <8>;
1132 bias-pull-up;
1133 };
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame^]1134
1135 wcd_default: wcd-reset-n-active-state {
1136 pins = "gpio107";
1137 function = "gpio";
1138 drive-strength = <16>;
1139 bias-disable;
1140 output-low;
1141 };
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]1142};
1143
1144&uart14 {
1145 status = "okay";
1146
1147 bluetooth {
1148 compatible = "qcom,wcn7850-bt";
1149
1150 clocks = <&rpmhcc RPMH_RF_CLK1>;
1151
1152 vddio-supply = <&vreg_l3c_1p2>;
1153 vddaon-supply = <&vreg_l15b_1p8>;
1154 vdddig-supply = <&vreg_s3c_0p9>;
1155 vddrfa0p8-supply = <&vreg_s3c_0p9>;
1156 vddrfa1p2-supply = <&vreg_s1c_1p2>;
1157 vddrfa1p9-supply = <&vreg_s6c_1p8>;
1158
1159 max-speed = <3200000>;
1160
1161 enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
1162 swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
1163
1164 pinctrl-0 = <&bt_default>;
1165 pinctrl-names = "default";
1166 };
1167};
1168
1169&uart15 {
1170 status = "okay";
1171};
1172
1173&ufs_mem_hc {
1174 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
1175
1176 vcc-supply = <&vreg_l17b_2p5>;
1177 vcc-max-microamp = <1300000>;
1178 vccq-supply = <&vreg_l1c_1p2>;
1179 vccq-max-microamp = <1200000>;
1180
1181 status = "okay";
1182};
1183
1184&ufs_mem_phy {
1185 vdda-phy-supply = <&vreg_l1d_0p88>;
1186 vdda-pll-supply = <&vreg_l3i_1p2>;
1187
1188 status = "okay";
1189};
1190
1191/*
1192 * DPAUX -> WCD9395 -> USB_SBU -> USB-C
1193 * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C
1194 * USB SS -> NB7VPQ904MMUTWG -> USB-C
1195 */
1196
1197&usb_1 {
1198 status = "okay";
1199};
1200
1201&usb_1_dwc3 {
1202 dr_mode = "otg";
1203 usb-role-switch;
1204};
1205
1206&usb_1_dwc3_hs {
1207 remote-endpoint = <&pmic_glink_hs_in>;
1208};
1209
1210&usb_1_dwc3_ss {
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame^]1211 remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]1212};
1213
1214&usb_1_hsphy {
1215 vdd-supply = <&vreg_l1i_0p88>;
1216 vdda12-supply = <&vreg_l3i_1p2>;
1217
1218 phys = <&pm8550b_eusb2_repeater>;
1219
1220 status = "okay";
1221};
1222
1223&usb_dp_qmpphy {
1224 vdda-phy-supply = <&vreg_l3i_1p2>;
1225 vdda-pll-supply = <&vreg_l3g_0p91>;
1226
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame^]1227 orientation-switch;
1228
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]1229 status = "okay";
1230};
1231
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame^]1232&usb_dp_qmpphy_dp_in {
1233 remote-endpoint = <&mdss_dp0_out>;
1234};
1235
1236&usb_dp_qmpphy_out {
1237 remote-endpoint = <&redriver_ss_in>;
1238};
1239
1240&usb_dp_qmpphy_usb_ss_in {
1241 remote-endpoint = <&usb_1_dwc3_ss>;
1242};
1243
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]1244&xo_board {
1245 clock-frequency = <76800000>;
1246};