| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Startup Code for RISC-V Core |
| * |
| * Copyright (c) 2017 Microsemi Corporation. |
| * Copyright (c) 2017 Padmarao Begari <Padmarao.Begari@microsemi.com> |
| * |
| * Copyright (C) 2017 Andes Technology Corporation |
| * Rick Chen, Andes Technology Corporation <rick@andestech.com> |
| */ |
| |
| #include <asm-offsets.h> |
| #include <config.h> |
| #include <common.h> |
| #include <elf.h> |
| #include <asm/encoding.h> |
| |
| #ifdef CONFIG_32BIT |
| #define LREG lw |
| #define SREG sw |
| #define REGBYTES 4 |
| #define RELOC_TYPE R_RISCV_32 |
| #define SYM_INDEX 0x8 |
| #define SYM_SIZE 0x10 |
| #else |
| #define LREG ld |
| #define SREG sd |
| #define REGBYTES 8 |
| #define RELOC_TYPE R_RISCV_64 |
| #define SYM_INDEX 0x20 |
| #define SYM_SIZE 0x18 |
| #endif |
| |
| .section .text |
| .globl _start |
| _start: |
| /* save hart id and dtb pointer */ |
| mv s0, a0 |
| mv s1, a1 |
| |
| li t0, CONFIG_SYS_SDRAM_BASE |
| SREG a2, 0(t0) |
| la t0, trap_entry |
| csrw mtvec, t0 |
| |
| /* mask all interrupts */ |
| csrw mie, zero |
| |
| /* Enable cache */ |
| jal icache_enable |
| jal dcache_enable |
| |
| /* |
| * Set stackpointer in internal/ex RAM to call board_init_f |
| */ |
| call_board_init_f: |
| li t0, -16 |
| li t1, CONFIG_SYS_INIT_SP_ADDR |
| and sp, t1, t0 /* force 16 byte alignment */ |
| |
| #ifdef CONFIG_DEBUG_UART |
| jal debug_uart_init |
| #endif |
| |
| call_board_init_f_0: |
| mv a0, sp |
| jal board_init_f_alloc_reserve |
| mv sp, a0 |
| |
| la t0, prior_stage_fdt_address |
| SREG s1, 0(t0) |
| |
| jal board_init_f_init_reserve |
| |
| mv a0, zero /* a0 <-- boot_flags = 0 */ |
| la t5, board_init_f |
| jr t5 /* jump to board_init_f() */ |
| |
| /* |
| * void relocate_code (addr_sp, gd, addr_moni) |
| * |
| * This "function" does not return, instead it continues in RAM |
| * after relocating the monitor code. |
| * |
| */ |
| .globl relocate_code |
| relocate_code: |
| mv s2, a0 /* save addr_sp */ |
| mv s3, a1 /* save addr of gd */ |
| mv s4, a2 /* save addr of destination */ |
| |
| /* |
| *Set up the stack |
| */ |
| stack_setup: |
| mv sp, s2 |
| la t0, _start |
| sub t6, s4, t0 /* t6 <- relocation offset */ |
| beq t0, s4, clear_bss /* skip relocation */ |
| |
| mv t1, s4 /* t1 <- scratch for copy_loop */ |
| la t3, __bss_start |
| sub t3, t3, t0 /* t3 <- __bss_start_ofs */ |
| add t2, t0, t3 /* t2 <- source end address */ |
| |
| copy_loop: |
| LREG t5, 0(t0) |
| addi t0, t0, REGBYTES |
| SREG t5, 0(t1) |
| addi t1, t1, REGBYTES |
| blt t0, t2, copy_loop |
| |
| /* |
| * Update dynamic relocations after board_init_f |
| */ |
| fix_rela_dyn: |
| la t1, __rel_dyn_start |
| la t2, __rel_dyn_end |
| beq t1, t2, clear_bss |
| add t1, t1, t6 /* t1 <- rela_dyn_start in RAM */ |
| add t2, t2, t6 /* t2 <- rela_dyn_end in RAM */ |
| |
| /* |
| * skip first reserved entry: address, type, addend |
| */ |
| bne t1, t2, 7f |
| |
| 6: |
| LREG t5, -(REGBYTES*2)(t1) /* t5 <-- relocation info:type */ |
| li t3, R_RISCV_RELATIVE /* reloc type R_RISCV_RELATIVE */ |
| bne t5, t3, 8f /* skip non-RISCV_RELOC entries */ |
| LREG t3, -(REGBYTES*3)(t1) |
| LREG t5, -(REGBYTES)(t1) /* t5 <-- addend */ |
| add t5, t5, t6 /* t5 <-- location to fix up in RAM */ |
| add t3, t3, t6 /* t3 <-- location to fix up in RAM */ |
| SREG t5, 0(t3) |
| 7: |
| addi t1, t1, (REGBYTES*3) |
| ble t1, t2, 6b |
| |
| 8: |
| la t4, __dyn_sym_start |
| add t4, t4, t6 |
| |
| 9: |
| LREG t5, -(REGBYTES*2)(t1) /* t5 <-- relocation info:type */ |
| srli t0, t5, SYM_INDEX /* t0 <--- sym table index */ |
| andi t5, t5, 0xFF /* t5 <--- relocation type */ |
| li t3, RELOC_TYPE |
| bne t5, t3, 10f /* skip non-addned entries */ |
| |
| LREG t3, -(REGBYTES*3)(t1) |
| li t5, SYM_SIZE |
| mul t0, t0, t5 |
| add s5, t4, t0 |
| LREG t5, REGBYTES(s5) |
| add t5, t5, t6 /* t5 <-- location to fix up in RAM */ |
| add t3, t3, t6 /* t3 <-- location to fix up in RAM */ |
| SREG t5, 0(t3) |
| 10: |
| addi t1, t1, (REGBYTES*3) |
| ble t1, t2, 9b |
| |
| /* |
| * trap update |
| */ |
| la t0, trap_entry |
| add t0, t0, t6 |
| csrw mtvec, t0 |
| |
| clear_bss: |
| la t0, __bss_start /* t0 <- rel __bss_start in FLASH */ |
| add t0, t0, t6 /* t0 <- rel __bss_start in RAM */ |
| la t1, __bss_end /* t1 <- rel __bss_end in FLASH */ |
| add t1, t1, t6 /* t1 <- rel __bss_end in RAM */ |
| beq t0, t1, call_board_init_r |
| |
| clbss_l: |
| SREG zero, 0(t0) /* clear loop... */ |
| addi t0, t0, REGBYTES |
| bne t0, t1, clbss_l |
| |
| /* |
| * We are done. Do not return, instead branch to second part of board |
| * initialization, now running from RAM. |
| */ |
| call_board_init_r: |
| jal invalidate_icache_all |
| jal flush_dcache_all |
| la t0, board_init_r |
| mv t4, t0 /* offset of board_init_r() */ |
| add t4, t4, t6 /* real address of board_init_r() */ |
| /* |
| * setup parameters for board_init_r |
| */ |
| mv a0, s3 /* gd_t */ |
| mv a1, s4 /* dest_addr */ |
| |
| /* |
| * jump to it ... |
| */ |
| jr t4 /* jump to board_init_r() */ |
| |
| /* |
| * trap entry |
| */ |
| .align 2 |
| trap_entry: |
| addi sp, sp, -32*REGBYTES |
| SREG x1, 1*REGBYTES(sp) |
| SREG x2, 2*REGBYTES(sp) |
| SREG x3, 3*REGBYTES(sp) |
| SREG x4, 4*REGBYTES(sp) |
| SREG x5, 5*REGBYTES(sp) |
| SREG x6, 6*REGBYTES(sp) |
| SREG x7, 7*REGBYTES(sp) |
| SREG x8, 8*REGBYTES(sp) |
| SREG x9, 9*REGBYTES(sp) |
| SREG x10, 10*REGBYTES(sp) |
| SREG x11, 11*REGBYTES(sp) |
| SREG x12, 12*REGBYTES(sp) |
| SREG x13, 13*REGBYTES(sp) |
| SREG x14, 14*REGBYTES(sp) |
| SREG x15, 15*REGBYTES(sp) |
| SREG x16, 16*REGBYTES(sp) |
| SREG x17, 17*REGBYTES(sp) |
| SREG x18, 18*REGBYTES(sp) |
| SREG x19, 19*REGBYTES(sp) |
| SREG x20, 20*REGBYTES(sp) |
| SREG x21, 21*REGBYTES(sp) |
| SREG x22, 22*REGBYTES(sp) |
| SREG x23, 23*REGBYTES(sp) |
| SREG x24, 24*REGBYTES(sp) |
| SREG x25, 25*REGBYTES(sp) |
| SREG x26, 26*REGBYTES(sp) |
| SREG x27, 27*REGBYTES(sp) |
| SREG x28, 28*REGBYTES(sp) |
| SREG x29, 29*REGBYTES(sp) |
| SREG x30, 30*REGBYTES(sp) |
| SREG x31, 31*REGBYTES(sp) |
| csrr a0, mcause |
| csrr a1, mepc |
| mv a2, sp |
| jal handle_trap |
| csrw mepc, a0 |
| |
| /* |
| * Remain in M-mode after mret |
| */ |
| li t0, MSTATUS_MPP |
| csrs mstatus, t0 |
| LREG x1, 1*REGBYTES(sp) |
| LREG x2, 2*REGBYTES(sp) |
| LREG x3, 3*REGBYTES(sp) |
| LREG x4, 4*REGBYTES(sp) |
| LREG x5, 5*REGBYTES(sp) |
| LREG x6, 6*REGBYTES(sp) |
| LREG x7, 7*REGBYTES(sp) |
| LREG x8, 8*REGBYTES(sp) |
| LREG x9, 9*REGBYTES(sp) |
| LREG x10, 10*REGBYTES(sp) |
| LREG x11, 11*REGBYTES(sp) |
| LREG x12, 12*REGBYTES(sp) |
| LREG x13, 13*REGBYTES(sp) |
| LREG x14, 14*REGBYTES(sp) |
| LREG x15, 15*REGBYTES(sp) |
| LREG x16, 16*REGBYTES(sp) |
| LREG x17, 17*REGBYTES(sp) |
| LREG x18, 18*REGBYTES(sp) |
| LREG x19, 19*REGBYTES(sp) |
| LREG x20, 20*REGBYTES(sp) |
| LREG x21, 21*REGBYTES(sp) |
| LREG x22, 22*REGBYTES(sp) |
| LREG x23, 23*REGBYTES(sp) |
| LREG x24, 24*REGBYTES(sp) |
| LREG x25, 25*REGBYTES(sp) |
| LREG x26, 26*REGBYTES(sp) |
| LREG x27, 27*REGBYTES(sp) |
| LREG x28, 28*REGBYTES(sp) |
| LREG x29, 29*REGBYTES(sp) |
| LREG x30, 30*REGBYTES(sp) |
| LREG x31, 31*REGBYTES(sp) |
| addi sp, sp, 32*REGBYTES |
| mret |