plat/fvp/fvp_def.h

/*
 * Copyright (c) 2014, ARM Limited and Contributors. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * Redistributions of source code must retain the above copyright notice, this
 * list of conditions and the following disclaimer.
 *
 * Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation
 * and/or other materials provided with the distribution.
 *
 * Neither the name of ARM nor the names of its contributors may be used
 * to endorse or promote products derived from this software without specific
 * prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef __FVP_DEF_H__
#define __FVP_DEF_H__

/* Firmware Image Package */
#define FIP_IMAGE_NAME			"fip.bin"
#define FVP_PRIMARY_CPU			0x0

/* Memory location options for TSP */
#define FVP_TRUSTED_SRAM_ID		0
#define FVP_TRUSTED_DRAM_ID		1
#define FVP_DRAM_ID			2

/*
 * Some of the definitions in this file use the 'ull' suffix in order to avoid
 * subtle integer overflow errors due to implicit integer type promotion when
 * working with 32-bit values.
 *
 * The TSP linker script includes some of these definitions to define the BL3-2
 * memory map, but the GNU LD does not support the 'ull' suffix, causing the
 * build process to fail. To solve this problem, the auxiliary macro MAKE_ULL(x)
 * will add the 'ull' suffix only when the macro __LINKER__  is not defined
 * (__LINKER__ is defined in the command line to preprocess the linker script).
 * Constants in the linker script will not have the 'ull' suffix, but this is
 * not a problem since the linker evaluates all constant expressions to 64 bit
 * (assuming the target architecture is 64 bit).
 */
#ifndef __LINKER__
  #define MAKE_ULL(x)			x##ull
#else
  #define MAKE_ULL(x)			x
#endif

/*******************************************************************************
 * FVP memory map related constants
 ******************************************************************************/

#define FVP_TRUSTED_ROM_BASE	0x00000000
#define FVP_TRUSTED_ROM_SIZE	0x04000000	/* 64 MB */

/* The first 4KB of Trusted SRAM are used as shared memory */
#define FVP_SHARED_MEM_BASE	0x04000000
#define FVP_SHARED_MEM_SIZE	0x00001000	/* 4 KB */

/* The remaining Trusted SRAM is used to load the BL images */
#define FVP_TRUSTED_SRAM_BASE	0x04001000
#define FVP_TRUSTED_SRAM_SIZE	0x0003F000	/* 252 KB */

#define FVP_TRUSTED_DRAM_BASE	0x06000000
#define FVP_TRUSTED_DRAM_SIZE	0x02000000	/* 32 MB */

#define FLASH0_BASE		0x08000000
#define FLASH0_SIZE		0x04000000

#define FLASH1_BASE		0x0c000000
#define FLASH1_SIZE		0x04000000

#define PSRAM_BASE		0x14000000
#define PSRAM_SIZE		0x04000000

#define VRAM_BASE		0x18000000
#define VRAM_SIZE		0x02000000

/* Aggregate of all devices in the first GB */
#define DEVICE0_BASE		0x1a000000
#define DEVICE0_SIZE		0x12200000

#define DEVICE1_BASE		0x2f000000
#define DEVICE1_SIZE		0x200000

#define NSRAM_BASE		0x2e000000
#define NSRAM_SIZE		0x10000

#define DRAM1_BASE		MAKE_ULL(0x80000000)
#define DRAM1_SIZE		MAKE_ULL(0x80000000)
#define DRAM1_END		(DRAM1_BASE + DRAM1_SIZE - 1)

/* Define the top 16 MB of DRAM1 as secure */
#define DRAM1_SEC_SIZE		MAKE_ULL(0x01000000)
#define DRAM1_SEC_BASE		(DRAM1_BASE + DRAM1_SIZE - DRAM1_SEC_SIZE)
#define DRAM1_SEC_END		(DRAM1_SEC_BASE + DRAM1_SEC_SIZE - 1)

#define DRAM1_NS_BASE		DRAM1_BASE
#define DRAM1_NS_SIZE		(DRAM1_SIZE - DRAM1_SEC_SIZE)
#define DRAM1_NS_END		(DRAM1_NS_BASE + DRAM1_NS_SIZE - 1)

#define DRAM_BASE		DRAM1_BASE
#define DRAM_SIZE		DRAM1_SIZE

#define DRAM2_BASE		MAKE_ULL(0x880000000)
#define DRAM2_SIZE		MAKE_ULL(0x780000000)
#define DRAM2_END		(DRAM2_BASE + DRAM2_SIZE - 1)

#define PCIE_EXP_BASE		0x40000000
#define TZRNG_BASE		0x7fe60000
#define TZNVCTR_BASE		0x7fe70000
#define TZROOTKEY_BASE		0x7fe80000

/* Memory mapped Generic timer interfaces  */
#define SYS_CNTCTL_BASE		0x2a430000
#define SYS_CNTREAD_BASE	0x2a800000
#define SYS_TIMCTL_BASE		0x2a810000

/* V2M motherboard system registers & offsets */
#define VE_SYSREGS_BASE		0x1c010000
#define V2M_SYS_ID		0x0
#define V2M_SYS_SWITCH		0x4
#define V2M_SYS_LED		0x8
#define V2M_SYS_CFGDATA		0xa0
#define V2M_SYS_CFGCTRL		0xa4
#define V2M_SYS_CFGSTATUS	0xa8

#define CFGCTRL_START		(1 << 31)
#define CFGCTRL_RW		(1 << 30)
#define CFGCTRL_FUNC_SHIFT	20
#define CFGCTRL_FUNC(fn)	(fn << CFGCTRL_FUNC_SHIFT)
#define FUNC_CLK_GEN		0x01
#define FUNC_TEMP		0x04
#define FUNC_DB_RESET		0x05
#define FUNC_SCC_CFG		0x06
#define FUNC_SHUTDOWN		0x08
#define FUNC_REBOOT		0x09

/* Load address of BL33 in the FVP port */
#define NS_IMAGE_OFFSET		(DRAM1_BASE + 0x8000000) /* DRAM + 128MB */

/* Special value used to verify platform parameters from BL2 to BL3-1 */
#define FVP_BL31_PLAT_PARAM_VAL	0x0f1e2d3c4b5a6978ULL

/*
 * V2M sysled bit definitions. The values written to this
 * register are defined in arch.h & runtime_svc.h. Only
 * used by the primary cpu to diagnose any cold boot issues.
 *
 * SYS_LED[0]   - Security state (S=0/NS=1)
 * SYS_LED[2:1] - Exception Level (EL3-EL0)
 * SYS_LED[7:3] - Exception Class (Sync/Async & origin)
 *
 */
#define SYS_LED_SS_SHIFT		0x0
#define SYS_LED_EL_SHIFT		0x1
#define SYS_LED_EC_SHIFT		0x3

#define SYS_LED_SS_MASK		0x1
#define SYS_LED_EL_MASK		0x3
#define SYS_LED_EC_MASK		0x1f

/* V2M sysid register bits */
#define SYS_ID_REV_SHIFT	28
#define SYS_ID_HBI_SHIFT	16
#define SYS_ID_BLD_SHIFT	12
#define SYS_ID_ARCH_SHIFT	8
#define SYS_ID_FPGA_SHIFT	0

#define SYS_ID_REV_MASK	0xf
#define SYS_ID_HBI_MASK	0xfff
#define SYS_ID_BLD_MASK	0xf
#define SYS_ID_ARCH_MASK	0xf
#define SYS_ID_FPGA_MASK	0xff

#define SYS_ID_BLD_LENGTH	4

#define HBI_FVP_BASE		0x020
#define REV_FVP_BASE_V0		0x0

#define HBI_FOUNDATION		0x010
#define REV_FOUNDATION_V2_0	0x0
#define REV_FOUNDATION_V2_1	0x1

#define BLD_GIC_VE_MMAP	0x0
#define BLD_GIC_A53A57_MMAP	0x1

#define ARCH_MODEL		0x1

/* FVP Power controller base address*/
#define PWRC_BASE		0x1c100000


/*******************************************************************************
 * CCI-400 related constants
 ******************************************************************************/
#define CCI400_BASE			0x2c090000
#define CCI400_SL_IFACE3_CLUSTER_IX	0
#define CCI400_SL_IFACE4_CLUSTER_IX	1

/*******************************************************************************
 * GIC-400 & interrupt handling related constants
 ******************************************************************************/
/* VE compatible GIC memory map */
#define VE_GICD_BASE			0x2c001000
#define VE_GICC_BASE			0x2c002000
#define VE_GICH_BASE			0x2c004000
#define VE_GICV_BASE			0x2c006000

/* Base FVP compatible GIC memory map */
#define BASE_GICD_BASE			0x2f000000
#define BASE_GICR_BASE			0x2f100000
#define BASE_GICC_BASE			0x2c000000
#define BASE_GICH_BASE			0x2c010000
#define BASE_GICV_BASE			0x2c02f000

#define IRQ_TZ_WDOG			56
#define IRQ_SEC_PHY_TIMER		29
#define IRQ_SEC_SGI_0			8
#define IRQ_SEC_SGI_1			9
#define IRQ_SEC_SGI_2			10
#define IRQ_SEC_SGI_3			11
#define IRQ_SEC_SGI_4			12
#define IRQ_SEC_SGI_5			13
#define IRQ_SEC_SGI_6			14
#define IRQ_SEC_SGI_7			15

/*******************************************************************************
 * PL011 related constants
 ******************************************************************************/
#define PL011_UART0_BASE		0x1c090000
#define PL011_UART1_BASE		0x1c0a0000
#define PL011_UART2_BASE		0x1c0b0000
#define PL011_UART3_BASE		0x1c0c0000

#define PL011_BAUDRATE  115200

#define PL011_UART0_CLK_IN_HZ 24000000
#define PL011_UART1_CLK_IN_HZ 24000000
#define PL011_UART2_CLK_IN_HZ 24000000
#define PL011_UART3_CLK_IN_HZ 24000000

/*******************************************************************************
 * TrustZone address space controller related constants
 ******************************************************************************/
#define TZC400_BASE			0x2a4a0000

/*
 * The NSAIDs for this platform as used to program the TZC400.
 */

/* NSAIDs used by devices in TZC filter 0 on FVP */
#define FVP_NSAID_DEFAULT		0
#define FVP_NSAID_PCI			1
#define FVP_NSAID_VIRTIO		8  /* from FVP v5.6 onwards */
#define FVP_NSAID_AP			9  /* Application Processors */
#define FVP_NSAID_VIRTIO_OLD		15 /* until FVP v5.5 */

/* NSAIDs used by devices in TZC filter 2 on FVP */
#define FVP_NSAID_HDLCD0		2
#define FVP_NSAID_CLCD			7

/*******************************************************************************
 *  Shared Data
 ******************************************************************************/

/* Entrypoint mailboxes */
#define MBOX_BASE		FVP_SHARED_MEM_BASE
#define MBOX_SIZE		0x200

/* Base address where parameters to BL31 are stored */
#define PARAMS_BASE		(MBOX_BASE + MBOX_SIZE)

#endif /* __FVP_DEF_H__ */