blob: cc4b24167daf84124880c632b18452910605d927 [file] [log] [blame]
Willy Tarreau9f2b7302008-01-02 20:48:34 +01001# This GNU Makefile supports different OS and CPU combinations.
2#
willy tarreaueedaa9f2005-12-17 14:08:03 +01003# You should use it this way :
Willy Tarreauef7341d2009-04-11 19:45:50 +02004# [g]make TARGET=os ARCH=arch CPU=cpu USE_xxx=1 ...
Willy Tarreauf2ef8c52007-07-11 09:19:31 +02005#
Willy Tarreau9f2b7302008-01-02 20:48:34 +01006# Valid USE_* options are the following. Most of them are automatically set by
7# the TARGET, others have to be explictly specified :
8# USE_CTTPROXY : enable CTTPROXY on Linux (needs kernel patch).
Willy Tarreauf14358b2008-02-19 10:53:32 +01009# USE_DLMALLOC : enable use of dlmalloc (see DLMALLOC_SRC)
Willy Tarreau9f2b7302008-01-02 20:48:34 +010010# USE_EPOLL : enable epoll() on Linux 2.6. Automatic.
Willy Tarreau9f2b7302008-01-02 20:48:34 +010011# USE_GETSOCKNAME : enable getsockname() on Linux 2.2. Automatic.
12# USE_KQUEUE : enable kqueue() on BSD. Automatic.
13# USE_MY_EPOLL : redefine epoll_* syscalls. Automatic.
Willy Tarreau43d8fb22011-08-22 17:12:02 +020014# USE_MY_SPLICE : redefine the splice syscall if build fails without.
Willy Tarreau9f2b7302008-01-02 20:48:34 +010015# USE_NETFILTER : enable netfilter on Linux. Automatic.
16# USE_PCRE : enable use of libpcre for regex. Recommended.
Willy Tarreau91418062013-04-04 23:05:32 +020017# USE_PCRE_JIT : enable JIT for faster regex on libpcre >= 8.32
Willy Tarreau9f2b7302008-01-02 20:48:34 +010018# USE_POLL : enable poll(). Automatic.
Emeric Brun9faf0712012-09-25 11:11:16 +020019# USE_PRIVATE_CACHE : disable shared memory cache of ssl sessions.
Emeric Bruncd1a5262014-05-07 23:11:42 +020020# USE_PTHREAD_PSHARED : enable pthread process shared mutex on sslcache.
Willy Tarreau9f2b7302008-01-02 20:48:34 +010021# USE_REGPARM : enable regparm optimization. Recommended on x86.
Willy Tarreau9f2b7302008-01-02 20:48:34 +010022# USE_STATIC_PCRE : enable static libpcre. Recommended.
Willy Tarreau9f2b7302008-01-02 20:48:34 +010023# USE_TPROXY : enable transparent proxy. Automatic.
Willy Tarreaue0c623d2012-06-04 00:42:09 +020024# USE_LINUX_TPROXY : enable full transparent proxy. Automatic.
25# USE_LINUX_SPLICE : enable kernel 2.6 splicing. Automatic.
Willy Tarreau890a33e2010-03-04 19:10:14 +010026# USE_LIBCRYPT : enable crypted passwords using -lcrypt
27# USE_CRYPT_H : set it if your system requires including crypt.h
Willy Tarreau48d84c12010-11-14 17:09:33 +010028# USE_VSYSCALL : enable vsyscall on Linux x86, bypassing libc
Willy Tarreau64bc40b2011-03-23 20:00:53 +010029# USE_GETADDRINFO : use getaddrinfo() to resolve IPv6 host names.
Emeric Brun7444f012012-05-18 15:48:30 +020030# USE_OPENSSL : enable use of OpenSSL. Recommended, but see below.
Thierry FOURNIER6f1fd482015-01-23 14:06:13 +010031# USE_LUA : enable Lua support.
Emeric Brun3e541d12012-09-03 11:14:36 +020032# USE_FUTEX : enable use of futex on kernel 2.6. Automatic.
Willy Tarreau1bc4aab2012-10-08 20:11:03 +020033# USE_ACCEPT4 : enable use of accept4() on linux. Automatic.
34# USE_MY_ACCEPT4 : use own implemention of accept4() if glibc < 2.10.
William Lallemand82fe75c2012-10-23 10:25:10 +020035# USE_ZLIB : enable zlib library support.
Willy Tarreau418b8c02015-03-29 03:32:06 +020036# USE_SLZ : enable slz library instead of zlib (pick at most one).
Willy Tarreaufc6c0322012-11-16 16:12:27 +010037# USE_CPU_AFFINITY : enable pinning processes to CPU on Linux. Automatic.
Lukas Tribus0999f762013-04-02 16:43:24 +020038# USE_TFO : enable TCP fast open. Supported on Linux >= 3.7.
KOVACS Krisztianb3e54fe2014-11-17 15:11:45 +010039# USE_NS : enable network namespace support. Supported on Linux >= 2.6.24.
Willy Tarreau71b99ef2015-03-17 14:33:22 +010040# USE_DL : enable it if your system requires -ldl. Automatic on Linux.
David Carliera03fb142015-06-01 14:00:07 +020041# USE_DEVICEATLAS : enable DeviceAtlas api.
Dragan Dosen93b38d92015-06-29 16:43:25 +020042# USE_51DEGREES : enable third party device detection library from 51Degrees
Willy Tarreauf2ef8c52007-07-11 09:19:31 +020043#
Willy Tarreau9f2b7302008-01-02 20:48:34 +010044# Options can be forced by specifying "USE_xxx=1" or can be disabled by using
45# "USE_xxx=" (empty string).
46#
47# Variables useful for packagers :
48# CC is set to "gcc" by default and is used for compilation only.
49# LD is set to "gcc" by default and is used for linking only.
Willy Tarreauef7341d2009-04-11 19:45:50 +020050# ARCH may be useful to force build of 32-bit binary on 64-bit systems
Willy Tarreau9f2b7302008-01-02 20:48:34 +010051# CFLAGS is automatically set for the specified CPU and may be overridden.
52# LDFLAGS is automatically set to -g and may be overridden.
53# SMALL_OPTS may be used to specify some options to shrink memory usage.
54# DEBUG may be used to set some internal debugging options.
55# ADDINC may be used to complete the include path in the form -Ipath.
56# ADDLIB may be used to complete the library list in the form -Lpath -llib.
57# DEFINE may be used to specify any additional define, which will be reported
58# by "haproxy -vv" in CFLAGS.
59# SILENT_DEFINE may be used to specify other defines which will not be
60# reported by "haproxy -vv".
Willy Tarreaubc289da2014-05-10 12:16:21 +020061# EXTRA is used to force building or not building some extra tools. By
62# default on Linux 2.6+, it contains "haproxy-systemd-wrapper".
Christian Wiesea184aa22008-03-12 15:25:35 +020063# DESTDIR is not set by default and is used for installation only.
64# It might be useful to set DESTDIR if you want to install haproxy
65# in a sandbox.
66# PREFIX is set to "/usr/local" by default and is used for installation only.
67# SBINDIR is set to "$(PREFIX)/sbin" by default and is used for installation
68# only.
Christian Wiese19b50292008-03-12 15:57:54 +020069# MANDIR is set to "$(PREFIX)/share/man" by default and is used for
70# installation only.
Christian Wiesebf34eb42008-03-12 17:24:49 +020071# DOCDIR is set to "$(PREFIX)/doc/haproxy" by default and is used for
72# installation only.
Willy Tarreau9f2b7302008-01-02 20:48:34 +010073#
74# Other variables :
75# DLMALLOC_SRC : build with dlmalloc, indicate the location of dlmalloc.c.
76# DLMALLOC_THRES : should match PAGE_SIZE on every platform (default: 4096).
77# PCREDIR : force the path to libpcre.
Willy Tarreau39793092013-02-13 12:39:06 +010078# PCRE_LIB : force the lib path to libpcre (defaults to $PCREDIR/lib).
79# PCRE_INC : force the include path to libpcre ($PCREDIR/inc)
Willy Tarreau9a059452013-09-17 15:26:39 +020080# SSL_LIB : force the lib path to libssl/libcrypto
81# SSL_INC : force the include path to libssl/libcrypto
Thierry FOURNIER6f1fd482015-01-23 14:06:13 +010082# LUA_LIB : force the lib path to lua
83# LUA_INC : force the include path to lua
Cyril Bontéc21adb52015-03-03 23:13:03 +010084# LUA_LIB_NAME : force the lib name (or automatically evaluated, by order of
Thierry FOURNIERf90838b2015-03-06 13:48:32 +010085# priority : lua5.3, lua53, lua).
Willy Tarreau9f2b7302008-01-02 20:48:34 +010086# IGNOREGIT : ignore GIT commit versions if set.
87# VERSION : force haproxy version reporting.
88# SUBVERS : add a sub-version (eg: platform, model, ...).
89# VERDATE : force haproxy's release date.
Willy Tarreau4f60f162007-04-08 16:39:58 +020090
Christian Wiesea184aa22008-03-12 15:25:35 +020091#### Installation options.
92DESTDIR =
93PREFIX = /usr/local
94SBINDIR = $(PREFIX)/sbin
Jeremy Hinegardneref3b4032008-11-15 17:29:03 -070095MANDIR = $(PREFIX)/share/man
Christian Wiesebf34eb42008-03-12 17:24:49 +020096DOCDIR = $(PREFIX)/doc/haproxy
Willy Tarreau4f60f162007-04-08 16:39:58 +020097
Willy Tarreau9f2b7302008-01-02 20:48:34 +010098#### TARGET system
99# Use TARGET=<target_name> to optimize for a specifc target OS among the
100# following list (use the default "generic" if uncertain) :
Willy Tarreaub1814652009-03-29 15:08:25 +0200101# generic, linux22, linux24, linux24e, linux26, solaris,
David Carlierb5714da2015-07-02 06:58:22 +0000102# freebsd, openbsd, netbsd, cygwin, custom, aix51, aix52
Willy Tarreaue4208cb2008-03-11 06:37:39 +0100103TARGET =
Willy Tarreau4f60f162007-04-08 16:39:58 +0200104
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100105#### TARGET CPU
106# Use CPU=<cpu_name> to optimize for a particular CPU, among the following
107# list :
Willy Tarreaua5899aa2010-11-28 07:41:00 +0100108# generic, native, i586, i686, ultrasparc, custom
willy tarreaueedaa9f2005-12-17 14:08:03 +0100109CPU = generic
willy tarreau036e1ce2005-12-17 13:46:33 +0100110
Willy Tarreauef7341d2009-04-11 19:45:50 +0200111#### Architecture, used when not building for native architecture
112# Use ARCH=<arch_name> to force build for a specific architecture. Known
113# architectures will lead to "-m32" or "-m64" being added to CFLAGS and
114# LDFLAGS. This can be required to build 32-bit binaries on 64-bit targets.
Willy Tarreaua5899aa2010-11-28 07:41:00 +0100115# Currently, only 32, 64, x86_64, i386, i486, i586 and i686 are understood.
Willy Tarreauef7341d2009-04-11 19:45:50 +0200116ARCH =
117
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100118#### Toolchain options.
119# GCC is normally used both for compiling and linking.
willy tarreaueedaa9f2005-12-17 14:08:03 +0100120CC = gcc
Christian Wiesef6308302008-03-17 18:23:12 +0100121LD = $(CC)
willy tarreaueedaa9f2005-12-17 14:08:03 +0100122
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100123#### Debug flags (typically "-g").
124# Those flags only feed CFLAGS so it is not mandatory to use this form.
125DEBUG_CFLAGS = -g
willy tarreau036e1ce2005-12-17 13:46:33 +0100126
Willy Tarreau3c9a3fb2010-11-28 08:28:15 +0100127#### Compiler-specific flags that may be used to disable some negative over-
128# optimization or to silence some warnings. -fno-strict-aliasing is needed with
129# gcc >= 4.4.
Willy Tarreau713a7562015-02-27 16:34:50 +0100130SPEC_CFLAGS = -fno-strict-aliasing -Wdeclaration-after-statement
Willy Tarreau3c9a3fb2010-11-28 08:28:15 +0100131
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100132#### Memory usage tuning
133# If small memory footprint is required, you can reduce the buffer size. There
134# are 2 buffers per concurrent session, so 16 kB buffers will eat 32 MB memory
135# with 1000 concurrent sessions. Putting it slightly lower than a page size
136# will prevent the additional parameters to go beyond a page. 8030 bytes is
137# exactly 5.5 TCP segments of 1460 bytes and is generally good. Useful tuning
138# macros include :
139# SYSTEM_MAXCONN, BUFSIZE, MAXREWRITE, REQURI_LEN, CAPTURE_LEN.
140# Example: SMALL_OPTS = -DBUFSIZE=8030 -DMAXREWRITE=1030 -DSYSTEM_MAXCONN=1024
141SMALL_OPTS =
Willy Tarreau6d1a9882007-01-07 02:03:04 +0100142
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100143#### Debug settings
144# You can enable debugging on specific code parts by setting DEBUG=-DDEBUG_xxx.
145# Currently defined DEBUG macros include DEBUG_FULL, DEBUG_MEMORY, DEBUG_FSM,
Krzysztof Piotr Oledzki96105042010-01-29 17:50:44 +0100146# DEBUG_HASH and DEBUG_AUTH. Please check sources for exact meaning or do not
147# use at all.
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100148DEBUG =
willy tarreau1c2ad212005-12-18 01:11:29 +0100149
Willy Tarreau7de211c2012-05-25 23:53:16 +0200150#### Trace options
151# Use TRACE=1 to trace function calls to file "trace.out" or to stderr if not
152# possible.
153TRACE =
154
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100155#### Additional include and library dirs
156# Redefine this if you want to add some special PATH to include/libs
157ADDINC =
158ADDLIB =
willy tarreau64a3cc32005-12-18 01:13:11 +0100159
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100160#### Specific macro definitions
161# Use DEFINE=-Dxxx to set any tunable macro. Anything declared here will appear
162# in the build options reported by "haproxy -vv". Use SILENT_DEFINE if you do
163# not want to pollute the report with complex defines.
Emeric Brun76d88952012-10-05 15:47:31 +0200164# The following settings might be of interest when SSL is enabled :
165# LISTEN_DEFAULT_CIPHERS is a cipher suite string used to set the default SSL
166# ciphers on "bind" lines instead of using OpenSSL's defaults.
167# CONNECT_DEFAULT_CIPHERS is a cipher suite string used to set the default
168# SSL ciphers on "server" lines instead of using OpenSSL's defaults.
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100169DEFINE =
170SILENT_DEFINE =
willy tarreau0f7af912005-12-17 12:21:26 +0100171
Willy Tarreaubc289da2014-05-10 12:16:21 +0200172#### extra programs to build (eg: haproxy-systemd-wrapper)
173# Force this to enable building extra programs or to disable them.
174# It's automatically appended depending on the targets.
175EXTRA =
willy tarreau5cbea6f2005-12-17 12:48:26 +0100176
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100177#### CPU dependant optimizations
178# Some CFLAGS are set by default depending on the target CPU. Those flags only
179# feed CPU_CFLAGS, which in turn feed CFLAGS, so it is not mandatory to use
180# them. You should not have to change these options. Better use CPU_CFLAGS or
181# even CFLAGS instead.
182CPU_CFLAGS.generic = -O2
Willy Tarreaua5899aa2010-11-28 07:41:00 +0100183CPU_CFLAGS.native = -O2 -march=native
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100184CPU_CFLAGS.i586 = -O2 -march=i586
185CPU_CFLAGS.i686 = -O2 -march=i686
186CPU_CFLAGS.ultrasparc = -O6 -mcpu=v9 -mtune=ultrasparc
187CPU_CFLAGS = $(CPU_CFLAGS.$(CPU))
willy tarreau9da061b2005-12-17 12:29:56 +0100188
Willy Tarreauef7341d2009-04-11 19:45:50 +0200189#### ARCH dependant flags, may be overriden by CPU flags
Willy Tarreaua5899aa2010-11-28 07:41:00 +0100190ARCH_FLAGS.32 = -m32
191ARCH_FLAGS.64 = -m64
Willy Tarreauef7341d2009-04-11 19:45:50 +0200192ARCH_FLAGS.i386 = -m32 -march=i386
193ARCH_FLAGS.i486 = -m32 -march=i486
194ARCH_FLAGS.i586 = -m32 -march=i586
195ARCH_FLAGS.i686 = -m32 -march=i686
196ARCH_FLAGS.x86_64 = -m64 -march=x86-64
197ARCH_FLAGS = $(ARCH_FLAGS.$(ARCH))
198
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100199#### Common CFLAGS
200# These CFLAGS contain general optimization options, CPU-specific optimizations
201# and debug flags. They may be overridden by some distributions which prefer to
202# set all of them at once instead of playing with the CPU and DEBUG variables.
Willy Tarreau3c9a3fb2010-11-28 08:28:15 +0100203CFLAGS = $(ARCH_FLAGS) $(CPU_CFLAGS) $(DEBUG_CFLAGS) $(SPEC_CFLAGS)
willy tarreaueedaa9f2005-12-17 14:08:03 +0100204
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100205#### Common LDFLAGS
206# These LDFLAGS are used as the first "ld" options, regardless of any library
207# path or any other option. They may be changed to add any linker-specific
208# option at the beginning of the ld command line.
Willy Tarreauef7341d2009-04-11 19:45:50 +0200209LDFLAGS = $(ARCH_FLAGS) -g
willy tarreau036e1ce2005-12-17 13:46:33 +0100210
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100211#### Target system options
212# Depending on the target platform, some options are set, as well as some
213# CFLAGS and LDFLAGS. The USE_* values are set to "implicit" so that they are
214# not reported in the build options string. You should not have to change
Willy Tarreau32e65ef2013-04-02 08:14:29 +0200215# anything there. poll() is always supported, unless explicitly disabled by
216# passing USE_POLL="" on the make command line.
217USE_POLL = default
218
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100219ifeq ($(TARGET),generic)
220 # generic system target has nothing specific
221 USE_POLL = implicit
222 USE_TPROXY = implicit
223else
224ifeq ($(TARGET),linux22)
225 # This is for Linux 2.2
226 USE_GETSOCKNAME = implicit
227 USE_POLL = implicit
228 USE_TPROXY = implicit
Krzysztof Piotr Oledzki96105042010-01-29 17:50:44 +0100229 USE_LIBCRYPT = implicit
Willy Tarreau71b99ef2015-03-17 14:33:22 +0100230 USE_DL = implicit
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100231else
232ifeq ($(TARGET),linux24)
233 # This is for standard Linux 2.4 with netfilter but without epoll()
234 USE_GETSOCKNAME = implicit
235 USE_NETFILTER = implicit
236 USE_POLL = implicit
237 USE_TPROXY = implicit
Krzysztof Piotr Oledzki96105042010-01-29 17:50:44 +0100238 USE_LIBCRYPT = implicit
Willy Tarreau71b99ef2015-03-17 14:33:22 +0100239 USE_DL = implicit
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100240else
241ifeq ($(TARGET),linux24e)
242 # This is for enhanced Linux 2.4 with netfilter and epoll() patch > 0.21
243 USE_GETSOCKNAME = implicit
244 USE_NETFILTER = implicit
245 USE_POLL = implicit
246 USE_EPOLL = implicit
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100247 USE_MY_EPOLL = implicit
248 USE_TPROXY = implicit
Krzysztof Piotr Oledzki96105042010-01-29 17:50:44 +0100249 USE_LIBCRYPT = implicit
Willy Tarreau71b99ef2015-03-17 14:33:22 +0100250 USE_DL = implicit
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100251else
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100252ifeq ($(TARGET),linux26)
253 # This is for standard Linux 2.6 with netfilter and standard epoll()
254 USE_GETSOCKNAME = implicit
255 USE_NETFILTER = implicit
256 USE_POLL = implicit
257 USE_EPOLL = implicit
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100258 USE_TPROXY = implicit
Krzysztof Piotr Oledzki96105042010-01-29 17:50:44 +0100259 USE_LIBCRYPT = implicit
Emeric Brun3e541d12012-09-03 11:14:36 +0200260 USE_FUTEX = implicit
Willy Tarreaubc289da2014-05-10 12:16:21 +0200261 EXTRA += haproxy-systemd-wrapper
Willy Tarreau71b99ef2015-03-17 14:33:22 +0100262 USE_DL = implicit
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100263else
Willy Tarreaue0c623d2012-06-04 00:42:09 +0200264ifeq ($(TARGET),linux2628)
265 # This is for standard Linux >= 2.6.28 with netfilter, epoll, tproxy and splice
266 USE_GETSOCKNAME = implicit
267 USE_NETFILTER = implicit
268 USE_POLL = implicit
269 USE_EPOLL = implicit
Willy Tarreaue0c623d2012-06-04 00:42:09 +0200270 USE_TPROXY = implicit
271 USE_LIBCRYPT = implicit
272 USE_LINUX_SPLICE= implicit
273 USE_LINUX_TPROXY= implicit
Willy Tarreau1bc4aab2012-10-08 20:11:03 +0200274 USE_ACCEPT4 = implicit
Emeric Brun3e541d12012-09-03 11:14:36 +0200275 USE_FUTEX = implicit
Willy Tarreaufc6c0322012-11-16 16:12:27 +0100276 USE_CPU_AFFINITY= implicit
Willy Tarreaub6daedd2013-01-07 16:57:09 +0100277 ASSUME_SPLICE_WORKS= implicit
Willy Tarreaubc289da2014-05-10 12:16:21 +0200278 EXTRA += haproxy-systemd-wrapper
Willy Tarreau71b99ef2015-03-17 14:33:22 +0100279 USE_DL = implicit
Willy Tarreaue0c623d2012-06-04 00:42:09 +0200280else
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100281ifeq ($(TARGET),solaris)
282 # This is for Solaris 8
Willy Tarreau64bc40b2011-03-23 20:00:53 +0100283 # We also enable getaddrinfo() which works since solaris 8.
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100284 USE_POLL = implicit
285 TARGET_CFLAGS = -fomit-frame-pointer -DFD_SETSIZE=65536 -D_REENTRANT
286 TARGET_LDFLAGS = -lnsl -lsocket
287 USE_TPROXY = implicit
Willy Tarreau890a33e2010-03-04 19:10:14 +0100288 USE_LIBCRYPT = implicit
289 USE_CRYPT_H = implicit
Willy Tarreau64bc40b2011-03-23 20:00:53 +0100290 USE_GETADDRINFO = implicit
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100291else
292ifeq ($(TARGET),freebsd)
293 # This is for FreeBSD
294 USE_POLL = implicit
295 USE_KQUEUE = implicit
296 USE_TPROXY = implicit
Krzysztof Piotr Oledzki96105042010-01-29 17:50:44 +0100297 USE_LIBCRYPT = implicit
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100298else
Willy Tarreau8624cab2013-04-02 08:17:43 +0200299ifeq ($(TARGET),osx)
300 # This is for Mac OS/X
301 USE_POLL = implicit
302 USE_KQUEUE = implicit
303 USE_TPROXY = implicit
304 USE_LIBCRYPT = implicit
305else
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100306ifeq ($(TARGET),openbsd)
307 # This is for OpenBSD >= 3.0
308 USE_POLL = implicit
309 USE_KQUEUE = implicit
310 USE_TPROXY = implicit
Yitzhak Sapir32087312009-06-14 18:27:54 +0200311else
David Carlierb5714da2015-07-02 06:58:22 +0000312ifeq ($(TARGET),netbsd)
313 # This is for NetBSD
314 USE_POLL = implicit
315 USE_KQUEUE = implicit
316 USE_TPROXY = implicit
317else
Willy Tarreau50abe302014-04-02 20:44:43 +0200318ifeq ($(TARGET),aix51)
319 # This is for AIX 5.1
320 USE_POLL = implicit
321 USE_LIBCRYPT = implicit
322 TARGET_CFLAGS = -Dss_family=__ss_family
323 DEBUG_CFLAGS =
324else
Willy Tarreau7dec9652012-06-06 16:15:03 +0200325ifeq ($(TARGET),aix52)
326 # This is for AIX 5.2 and later
327 USE_POLL = implicit
328 USE_LIBCRYPT = implicit
329 TARGET_CFLAGS = -D_MSGQSUPPORT
330 DEBUG_CFLAGS =
331else
Yitzhak Sapir32087312009-06-14 18:27:54 +0200332ifeq ($(TARGET),cygwin)
333 # This is for Cygwin
334 # Cygwin adds IPv6 support only in version 1.7 (in beta right now).
335 USE_POLL = implicit
336 USE_TPROXY = implicit
337 TARGET_CFLAGS = $(if $(filter 1.5.%, $(shell uname -r)), -DUSE_IPV6 -DAF_INET6=23 -DINET6_ADDRSTRLEN=46, )
338endif # cygwin
Willy Tarreau7dec9652012-06-06 16:15:03 +0200339endif # aix52
Willy Tarreau50abe302014-04-02 20:44:43 +0200340endif # aix51
David Carlierb5714da2015-07-02 06:58:22 +0000341endif # netbsd
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100342endif # openbsd
Willy Tarreau8624cab2013-04-02 08:17:43 +0200343endif # osx
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100344endif # freebsd
345endif # solaris
Willy Tarreaue0c623d2012-06-04 00:42:09 +0200346endif # linux2628
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100347endif # linux26
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100348endif # linux24e
349endif # linux24
350endif # linux22
351endif # generic
willy tarreau036e1ce2005-12-17 13:46:33 +0100352
willy tarreau4373b962005-12-18 01:32:31 +0100353
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100354#### Old-style REGEX library settings for compatibility with previous setups.
355# It is still possible to use REGEX=<regex_lib> to select an alternative regex
356# library. By default, we use libc's regex. On Solaris 8/Sparc, grouping seems
357# to be broken using libc, so consider using pcre instead. Supported values are
358# "libc", "pcre", and "static-pcre". Use of this method is deprecated in favor
359# of "USE_PCRE" and "USE_STATIC_PCRE" (see build options below).
360REGEX = libc
willy tarreau9da061b2005-12-17 12:29:56 +0100361
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100362ifeq ($(REGEX),pcre)
363USE_PCRE = 1
364$(warning WARNING! use of "REGEX=pcre" is deprecated, consider using "USE_PCRE=1" instead.)
365endif
willy tarreau0174f312005-12-18 01:02:42 +0100366
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100367ifeq ($(REGEX),static-pcre)
368USE_STATIC_PCRE = 1
369$(warning WARNING! use of "REGEX=pcre-static" is deprecated, consider using "USE_STATIC_PCRE=1" instead.)
370endif
willy tarreau1c2ad212005-12-18 01:11:29 +0100371
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100372#### Old-style TPROXY settings
373ifneq ($(findstring -DTPROXY,$(DEFINE)),)
374USE_TPROXY = 1
375$(warning WARNING! use of "DEFINE=-DTPROXY" is deprecated, consider using "USE_TPROXY=1" instead.)
376endif
377
378
379#### Determine version, sub-version and release date.
380# If GIT is found, and IGNOREGIT is not set, VERSION, SUBVERS and VERDATE are
381# extracted from the last commit. Otherwise, use the contents of the files
382# holding the same names in the current directory.
willy tarreau0174f312005-12-18 01:02:42 +0100383
Willy Tarreau6620dbb2007-01-02 00:44:53 +0100384ifeq ($(IGNOREGIT),)
Willy Tarreau689e4d72013-12-10 09:31:06 +0100385VERSION := $(shell [ -d .git/. ] && ref=`(git describe --tags --match 'v*' --abbrev=0) 2>/dev/null` && ref=$${ref%-g*} && echo "$${ref\#v}")
Willy Tarreau9bf6c6e2006-12-23 11:12:04 +0100386ifneq ($(VERSION),)
387# OK git is there and works.
Willy Tarreau37459502014-07-16 11:38:52 +0200388SUBVERS := $(shell comms=`git log --format=oneline --no-merges v$(VERSION).. 2>/dev/null | wc -l | tr -dc '0-9'`; commit=`(git log -1 --pretty=%h --abbrev=6) 2>/dev/null`; [ $$comms -gt 0 ] && echo "-$$commit-$$comms")
Willy Tarreau689e4d72013-12-10 09:31:06 +0100389VERDATE := $(shell git log -1 --pretty=format:%ci | cut -f1 -d' ' | tr '-' '/')
Willy Tarreauec692562007-09-09 23:31:11 +0200390endif
391endif
392
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100393# Last commit version not found, take it from the files.
Willy Tarreauec692562007-09-09 23:31:11 +0200394ifeq ($(VERSION),)
395VERSION := $(shell cat VERSION 2>/dev/null || touch VERSION)
396endif
397ifeq ($(SUBVERS),)
Willy Tarreau6173bbe2013-12-16 01:34:39 +0100398SUBVERS := $(shell (grep -v '\$$Format' SUBVERS 2>/dev/null || touch SUBVERS) | head -n 1)
Willy Tarreauec692562007-09-09 23:31:11 +0200399endif
400ifeq ($(VERDATE),)
Willy Tarreauf1ed3272014-01-26 00:39:22 +0100401VERDATE := $(shell (grep -v '^\$$Format' VERDATE 2>/dev/null || touch VERDATE) | head -n 1 | cut -f1 -d' ' | tr '-' '/')
Willy Tarreau9bf6c6e2006-12-23 11:12:04 +0100402endif
Willy Tarreau77074d52006-11-12 23:57:19 +0100403
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100404#### Build options
405# Do not change these ones, enable USE_* variables instead.
406OPTIONS_CFLAGS =
407OPTIONS_LDFLAGS =
408OPTIONS_OBJS =
Willy Tarreau77074d52006-11-12 23:57:19 +0100409
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100410# This variable collects all USE_* values except those set to "implicit". This
411# is used to report a list of all flags which were used to build this version.
412# Do not assign anything to it.
413BUILD_OPTIONS =
414
415# Return USE_xxx=$(USE_xxx) unless $(USE_xxx) = "implicit"
416# Usage:
417# BUILD_OPTIONS += $(call ignore_implicit,USE_xxx)
418ignore_implicit = $(patsubst %=implicit,,$(1)=$($(1)))
Willy Tarreau77074d52006-11-12 23:57:19 +0100419
Willy Tarreau6d1a9882007-01-07 02:03:04 +0100420ifneq ($(USE_TCPSPLICE),)
Willy Tarreaub55932d2009-08-16 13:20:32 +0200421$(error experimental option USE_TCPSPLICE has been removed, check USE_LINUX_SPLICE)
Willy Tarreau6d1a9882007-01-07 02:03:04 +0100422endif
423
Willy Tarreau88e458a2009-01-25 16:13:42 +0100424ifneq ($(USE_LINUX_SPLICE),)
425OPTIONS_CFLAGS += -DCONFIG_HAP_LINUX_SPLICE
426BUILD_OPTIONS += $(call ignore_implicit,USE_LINUX_SPLICE)
427endif
428
Willy Tarreau77074d52006-11-12 23:57:19 +0100429ifneq ($(USE_CTTPROXY),)
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100430OPTIONS_CFLAGS += -DCONFIG_HAP_CTTPROXY
431OPTIONS_OBJS += src/cttproxy.o
432BUILD_OPTIONS += $(call ignore_implicit,USE_CTTPROXY)
Willy Tarreau77074d52006-11-12 23:57:19 +0100433endif
434
435ifneq ($(USE_TPROXY),)
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100436OPTIONS_CFLAGS += -DTPROXY
437BUILD_OPTIONS += $(call ignore_implicit,USE_TPROXY)
Willy Tarreau77074d52006-11-12 23:57:19 +0100438endif
439
Willy Tarreaub1e52e82008-01-13 14:49:51 +0100440ifneq ($(USE_LINUX_TPROXY),)
441OPTIONS_CFLAGS += -DCONFIG_HAP_LINUX_TPROXY
442BUILD_OPTIONS += $(call ignore_implicit,USE_LINUX_TPROXY)
443endif
444
Krzysztof Piotr Oledzki96105042010-01-29 17:50:44 +0100445ifneq ($(USE_LIBCRYPT),)
446OPTIONS_CFLAGS += -DCONFIG_HAP_CRYPT
447BUILD_OPTIONS += $(call ignore_implicit,USE_LIBCRYPT)
448OPTIONS_LDFLAGS += -lcrypt
449endif
450
Willy Tarreau890a33e2010-03-04 19:10:14 +0100451ifneq ($(USE_CRYPT_H),)
452OPTIONS_CFLAGS += -DNEED_CRYPT_H
453BUILD_OPTIONS += $(call ignore_implicit,USE_CRYPT_H)
454endif
455
Willy Tarreau64bc40b2011-03-23 20:00:53 +0100456ifneq ($(USE_GETADDRINFO),)
457OPTIONS_CFLAGS += -DUSE_GETADDRINFO
458BUILD_OPTIONS += $(call ignore_implicit,USE_GETADDRINFO)
459endif
460
Willy Tarreau418b8c02015-03-29 03:32:06 +0200461ifneq ($(USE_SLZ),)
462# Use SLZ_INC and SLZ_LIB to force path to zlib.h and libz.{a,so} if needed.
463SLZ_INC =
464SLZ_LIB =
465OPTIONS_CFLAGS += -DUSE_SLZ $(if $(SLZ_INC),-I$(SLZ_INC))
466BUILD_OPTIONS += $(call ignore_implicit,USE_SLZ)
467OPTIONS_LDFLAGS += $(if $(SLZ_LIB),-L$(SLZ_LIB)) -lslz
468endif
469
William Lallemand82fe75c2012-10-23 10:25:10 +0200470ifneq ($(USE_ZLIB),)
Willy Tarreaue2f49442012-02-10 20:37:26 +0100471# Use ZLIB_INC and ZLIB_LIB to force path to zlib.h and libz.{a,so} if needed.
472ZLIB_INC =
473ZLIB_LIB =
474OPTIONS_CFLAGS += -DUSE_ZLIB $(if $(ZLIB_INC),-I$(ZLIB_INC))
William Lallemand82fe75c2012-10-23 10:25:10 +0200475BUILD_OPTIONS += $(call ignore_implicit,USE_ZLIB)
Willy Tarreaue2f49442012-02-10 20:37:26 +0100476OPTIONS_LDFLAGS += $(if $(ZLIB_LIB),-L$(ZLIB_LIB)) -lz
William Lallemand82fe75c2012-10-23 10:25:10 +0200477endif
478
Willy Tarreau77074d52006-11-12 23:57:19 +0100479ifneq ($(USE_POLL),)
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100480OPTIONS_CFLAGS += -DENABLE_POLL
481OPTIONS_OBJS += src/ev_poll.o
482BUILD_OPTIONS += $(call ignore_implicit,USE_POLL)
Willy Tarreau77074d52006-11-12 23:57:19 +0100483endif
484
485ifneq ($(USE_EPOLL),)
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100486OPTIONS_CFLAGS += -DENABLE_EPOLL
487OPTIONS_OBJS += src/ev_epoll.o
488BUILD_OPTIONS += $(call ignore_implicit,USE_EPOLL)
Willy Tarreau77074d52006-11-12 23:57:19 +0100489endif
490
491ifneq ($(USE_MY_EPOLL),)
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100492OPTIONS_CFLAGS += -DUSE_MY_EPOLL
493BUILD_OPTIONS += $(call ignore_implicit,USE_MY_EPOLL)
494endif
495
496ifneq ($(USE_KQUEUE),)
497OPTIONS_CFLAGS += -DENABLE_KQUEUE
498OPTIONS_OBJS += src/ev_kqueue.o
499BUILD_OPTIONS += $(call ignore_implicit,USE_KQUEUE)
Willy Tarreau77074d52006-11-12 23:57:19 +0100500endif
501
Willy Tarreau48d84c12010-11-14 17:09:33 +0100502ifneq ($(USE_VSYSCALL),)
503OPTIONS_OBJS += src/i386-linux-vsys.o
504OPTIONS_CFLAGS += -DCONFIG_HAP_LINUX_VSYSCALL
505BUILD_OPTIONS += $(call ignore_implicit,USE_VSYSCALL)
506endif
507
Willy Tarreaufc6c0322012-11-16 16:12:27 +0100508ifneq ($(USE_CPU_AFFINITY),)
509OPTIONS_CFLAGS += -DUSE_CPU_AFFINITY
510BUILD_OPTIONS += $(call ignore_implicit,USE_CPU_AFFINITY)
511endif
512
Willy Tarreau43d8fb22011-08-22 17:12:02 +0200513ifneq ($(USE_MY_SPLICE),)
514OPTIONS_CFLAGS += -DUSE_MY_SPLICE
515BUILD_OPTIONS += $(call ignore_implicit,USE_MY_SPLICE)
516endif
517
Willy Tarreaub6daedd2013-01-07 16:57:09 +0100518ifneq ($(ASSUME_SPLICE_WORKS),)
519OPTIONS_CFLAGS += -DASSUME_SPLICE_WORKS
520BUILD_OPTIONS += $(call ignore_implicit,ASSUME_SPLICE_WORKS)
521endif
522
Willy Tarreau1bc4aab2012-10-08 20:11:03 +0200523ifneq ($(USE_ACCEPT4),)
524OPTIONS_CFLAGS += -DUSE_ACCEPT4
525BUILD_OPTIONS += $(call ignore_implicit,USE_ACCEPT4)
526endif
527
528ifneq ($(USE_MY_ACCEPT4),)
529OPTIONS_CFLAGS += -DUSE_MY_ACCEPT4
530BUILD_OPTIONS += $(call ignore_implicit,USE_MY_ACCEPT4)
531endif
532
Willy Tarreau77074d52006-11-12 23:57:19 +0100533ifneq ($(USE_NETFILTER),)
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100534OPTIONS_CFLAGS += -DNETFILTER
535BUILD_OPTIONS += $(call ignore_implicit,USE_NETFILTER)
Willy Tarreau77074d52006-11-12 23:57:19 +0100536endif
537
Willy Tarreau77074d52006-11-12 23:57:19 +0100538ifneq ($(USE_GETSOCKNAME),)
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100539OPTIONS_CFLAGS += -DUSE_GETSOCKNAME
540BUILD_OPTIONS += $(call ignore_implicit,USE_GETSOCKNAME)
Willy Tarreau77074d52006-11-12 23:57:19 +0100541endif
542
543ifneq ($(USE_REGPARM),)
Willy Tarreaucc05fba2009-10-27 21:40:18 +0100544OPTIONS_CFLAGS += -DCONFIG_REGPARM=3
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100545BUILD_OPTIONS += $(call ignore_implicit,USE_REGPARM)
Willy Tarreau77074d52006-11-12 23:57:19 +0100546endif
547
Willy Tarreau71b99ef2015-03-17 14:33:22 +0100548ifneq ($(USE_DL),)
549BUILD_OPTIONS += $(call ignore_implicit,USE_DL)
550OPTIONS_LDFLAGS += -ldl
551endif
552
Willy Tarreauf32d19a2008-03-07 10:02:14 +0100553# report DLMALLOC_SRC only if explicitly specified
554ifneq ($(DLMALLOC_SRC),)
555BUILD_OPTIONS += DLMALLOC_SRC=$(DLMALLOC_SRC)
556endif
557
Willy Tarreauf14358b2008-02-19 10:53:32 +0100558ifneq ($(USE_DLMALLOC),)
559BUILD_OPTIONS += $(call ignore_implicit,USE_DLMALLOC)
560ifeq ($(DLMALLOC_SRC),)
561DLMALLOC_SRC=src/dlmalloc.c
562endif
563endif
564
Willy Tarreauf2ef8c52007-07-11 09:19:31 +0200565ifneq ($(DLMALLOC_SRC),)
Willy Tarreauf32d19a2008-03-07 10:02:14 +0100566# DLMALLOC_THRES may be changed to match PAGE_SIZE on every platform
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100567DLMALLOC_THRES = 4096
568OPTIONS_OBJS += src/dlmalloc.o
Willy Tarreauf2ef8c52007-07-11 09:19:31 +0200569endif
570
Emeric Brun7444f012012-05-18 15:48:30 +0200571ifneq ($(USE_OPENSSL),)
572# OpenSSL is packaged in various forms and with various dependences.
573# In general -lssl is enough, but on some platforms, -lcrypto may be needed,
Willy Tarreau8f182d92012-09-10 09:11:22 +0200574# reason why it's added by default. Some even need -lz, then you'll need to
Willy Tarreau9a059452013-09-17 15:26:39 +0200575# pass it in the "ADDLIB" variable if needed. If your SSL libraries are not
576# in the usual path, use SSL_INC=/path/to/inc and SSL_LIB=/path/to/lib.
Willy Tarreau0e0bf802012-09-08 11:28:56 +0200577BUILD_OPTIONS += $(call ignore_implicit,USE_OPENSSL)
Willy Tarreau9a059452013-09-17 15:26:39 +0200578OPTIONS_CFLAGS += -DUSE_OPENSSL $(if $(SSL_INC),-I$(SSL_INC))
Willy Tarreaucd360ce2014-10-31 07:36:51 +0100579OPTIONS_LDFLAGS += $(if $(SSL_LIB),-L$(SSL_LIB)) -lssl -lcrypto
Emeric Brun3e541d12012-09-03 11:14:36 +0200580OPTIONS_OBJS += src/ssl_sock.o src/shctx.o
Emeric Brun9faf0712012-09-25 11:11:16 +0200581ifneq ($(USE_PRIVATE_CACHE),)
582OPTIONS_CFLAGS += -DUSE_PRIVATE_CACHE
583else
Emeric Bruncd1a5262014-05-07 23:11:42 +0200584ifneq ($(USE_PTHREAD_PSHARED),)
585OPTIONS_CFLAGS += -DUSE_PTHREAD_PSHARED
586OPTIONS_LDFLAGS += -lpthread
587else
Emeric Brun3e541d12012-09-03 11:14:36 +0200588ifneq ($(USE_FUTEX),)
589OPTIONS_CFLAGS += -DUSE_SYSCALL_FUTEX
Emeric Bruncd1a5262014-05-07 23:11:42 +0200590endif
Emeric Brun3e541d12012-09-03 11:14:36 +0200591endif
Emeric Brun7444f012012-05-18 15:48:30 +0200592endif
Emeric Brun9faf0712012-09-25 11:11:16 +0200593endif
Emeric Brun7444f012012-05-18 15:48:30 +0200594
Thierry FOURNIER6f1fd482015-01-23 14:06:13 +0100595ifneq ($(USE_LUA),)
Cyril Bontéc21adb52015-03-03 23:13:03 +0100596check_lua_lib = $(shell echo "int main(){}" | $(CC) -o /dev/null -x c - $(2) -l$(1) 2>/dev/null && echo $(1))
597
Cyril Bonté8e441fb2015-08-16 20:27:38 +0200598BUILD_OPTIONS += $(call ignore_implicit,USE_LUA)
Thierry FOURNIER6f1fd482015-01-23 14:06:13 +0100599OPTIONS_CFLAGS += -DUSE_LUA $(if $(LUA_INC),-I$(LUA_INC))
Cyril Bontéc21adb52015-03-03 23:13:03 +0100600LUA_LD_FLAGS := $(if $(LUA_LIB),-L$(LUA_LIB))
601ifeq ($(LUA_LIB_NAME),)
602# Try to automatically detect the Lua library
Thierry FOURNIER463119c2015-03-10 00:35:36 +0100603LUA_LIB_NAME := $(firstword $(foreach lib,lua5.3 lua53 lua,$(call check_lua_lib,$(lib),$(LUA_LD_FLAGS))))
Cyril Bontéc21adb52015-03-03 23:13:03 +0100604ifeq ($(LUA_LIB_NAME),)
Thierry FOURNIER463119c2015-03-10 00:35:36 +0100605$(error unable to automatically detect the Lua library name, you can enforce its name with LUA_LIB_NAME=<name> (where <name> can be lua5.3, lua53, lua, ...))
Cyril Bontéc21adb52015-03-03 23:13:03 +0100606endif
607endif
608
Willy Tarreau71b99ef2015-03-17 14:33:22 +0100609OPTIONS_LDFLAGS += $(LUA_LD_FLAGS) -l$(LUA_LIB_NAME) -lm
Vincent Bernate192cbb2015-07-16 20:52:51 +0200610ifneq ($(USE_DL),)
611OPTIONS_LDFLAGS += -ldl
612endif
Thierry FOURNIER6f1fd482015-01-23 14:06:13 +0100613OPTIONS_OBJS += src/hlua.o
614endif
615
David Carliera03fb142015-06-01 14:00:07 +0200616ifneq ($(USE_DEVICEATLAS),)
Willy Tarreau82bd42e2015-06-02 14:10:28 +0200617# Use DEVICEATLAS_SRC and possibly DEVICEATLAS_INC and DEVICEATLAS_LIB to force path
Dragan Dosen93b38d92015-06-29 16:43:25 +0200618# to DeviceAtlas headers and libraries if needed.
Willy Tarreau82bd42e2015-06-02 14:10:28 +0200619DEVICEATLAS_SRC =
620DEVICEATLAS_INC = $(DEVICEATLAS_SRC)
621DEVICEATLAS_LIB = $(DEVICEATLAS_SRC)
David Carliera03fb142015-06-01 14:00:07 +0200622OPTIONS_OBJS += $(DEVICEATLAS_LIB)/json.o
623OPTIONS_OBJS += $(DEVICEATLAS_LIB)/dac.o
624OPTIONS_OBJS += src/da.o
625OPTIONS_CFLAGS += -DUSE_DEVICEATLAS $(if $(DEVICEATLAS_INC),-I$(DEVICEATLAS_INC))
626BUILD_OPTIONS += $(call ignore_implicit,USE_DEVICEATLAS)
627endif
628
Thomas Holmes0ca65f82015-05-12 15:06:21 +0100629ifneq ($(USE_51DEGREES),)
Willy Tarreauc7203c72015-06-01 11:12:35 +0200630# Use 51DEGREES_SRC and possibly 51DEGREES_INC and 51DEGREES_LIB to force path
631# to 51degrees headers and libraries if needed.
63251DEGREES_SRC =
63351DEGREES_INC = $(51DEGREES_SRC)
63451DEGREES_LIB = $(51DEGREES_SRC)
Dragan Dosen93b38d92015-06-29 16:43:25 +0200635OPTIONS_OBJS += $(51DEGREES_LIB)/51Degrees.o
636OPTIONS_OBJS += src/51d.o
Thomas Holmes0ca65f82015-05-12 15:06:21 +0100637OPTIONS_CFLAGS += -DUSE_51DEGREES $(if $(51DEGREES_INC),-I$(51DEGREES_INC))
638BUILD_OPTIONS += $(call ignore_implicit,USE_51DEGREES)
639OPTIONS_LDFLAGS += $(if $(51DEGREES_LIB),-L$(51DEGREES_LIB)) -lz
640endif
641
Hiroaki Nakamura70351322013-01-13 15:00:42 +0900642ifneq ($(USE_PCRE)$(USE_STATIC_PCRE)$(USE_PCRE_JIT),)
Willy Tarreau39793092013-02-13 12:39:06 +0100643# PCREDIR is used to automatically construct the PCRE_INC and PCRE_LIB paths,
644# by appending /include and /lib respectively. If your system does not use the
645# same sub-directories, simply force these variables instead of PCREDIR. It is
646# automatically detected but can be forced if required (for cross-compiling).
647# Forcing PCREDIR to an empty string will let the compiler use the default
648# locations.
649
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100650PCREDIR := $(shell pcre-config --prefix 2>/dev/null || echo /usr/local)
Willy Tarreau39793092013-02-13 12:39:06 +0100651ifneq ($(PCREDIR),)
652PCRE_INC := $(PCREDIR)/include
653PCRE_LIB := $(PCREDIR)/lib
Willy Tarreau79b34bf2006-12-22 15:28:43 +0100654endif
Willy Tarreau39793092013-02-13 12:39:06 +0100655
Christian Wiesec8203002008-11-20 14:47:04 +0100656ifeq ($(USE_STATIC_PCRE),)
Willy Tarreau39793092013-02-13 12:39:06 +0100657# dynamic PCRE
658OPTIONS_CFLAGS += -DUSE_PCRE $(if $(PCRE_INC),-I$(PCRE_INC))
659OPTIONS_LDFLAGS += $(if $(PCRE_LIB),-L$(PCRE_LIB)) -lpcreposix -lpcre
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100660BUILD_OPTIONS += $(call ignore_implicit,USE_PCRE)
Willy Tarreau39793092013-02-13 12:39:06 +0100661else
662# static PCRE
663OPTIONS_CFLAGS += -DUSE_PCRE $(if $(PCRE_INC),-I$(PCRE_INC))
664OPTIONS_LDFLAGS += $(if $(PCRE_LIB),-L$(PCRE_LIB)) -Wl,-Bstatic -lpcreposix -lpcre -Wl,-Bdynamic
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100665BUILD_OPTIONS += $(call ignore_implicit,USE_STATIC_PCRE)
666endif
Hiroaki Nakamura70351322013-01-13 15:00:42 +0900667# JIT PCRE
668ifneq ($(USE_PCRE_JIT),)
669OPTIONS_CFLAGS += -DUSE_PCRE_JIT
Lukas Tribusea68d362013-04-04 12:24:16 +0200670BUILD_OPTIONS += $(call ignore_implicit,USE_PCRE_JIT)
Hiroaki Nakamura70351322013-01-13 15:00:42 +0900671endif
Willy Tarreau39793092013-02-13 12:39:06 +0100672endif
Willy Tarreau77074d52006-11-12 23:57:19 +0100673
Lukas Tribus0999f762013-04-02 16:43:24 +0200674# TCP Fast Open
675ifneq ($(USE_TFO),)
676OPTIONS_CFLAGS += -DUSE_TFO
677BUILD_OPTIONS += $(call ignore_implicit,USE_TFO)
678endif
679
Willy Tarreau45cb4fb2009-10-26 21:10:04 +0100680# This one can be changed to look for ebtree files in an external directory
681EBTREE_DIR := ebtree
Willy Tarreau77074d52006-11-12 23:57:19 +0100682
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100683#### Global compile options
684VERBOSE_CFLAGS = $(CFLAGS) $(TARGET_CFLAGS) $(SMALL_OPTS) $(DEFINE)
Willy Tarreau45cb4fb2009-10-26 21:10:04 +0100685COPTS = -Iinclude -I$(EBTREE_DIR) -Wall
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100686COPTS += $(CFLAGS) $(TARGET_CFLAGS) $(SMALL_OPTS) $(DEFINE) $(SILENT_DEFINE)
687COPTS += $(DEBUG) $(OPTIONS_CFLAGS) $(ADDINC)
willy tarreaueedaa9f2005-12-17 14:08:03 +0100688
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100689ifneq ($(VERSION)$(SUBVERS),)
690COPTS += -DCONFIG_HAPROXY_VERSION=\"$(VERSION)$(SUBVERS)\"
691endif
Willy Tarreau6d1a9882007-01-07 02:03:04 +0100692
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100693ifneq ($(VERDATE),)
694COPTS += -DCONFIG_HAPROXY_DATE=\"$(VERDATE)\"
Willy Tarreau6d1a9882007-01-07 02:03:04 +0100695endif
696
Willy Tarreau7de211c2012-05-25 23:53:16 +0200697ifneq ($(TRACE),)
698# if tracing is enabled, we want it to be as fast as possible
699TRACE_COPTS := $(filter-out -O0 -O1 -O2 -pg -finstrument-functions,$(COPTS)) -O3 -fomit-frame-pointer
700COPTS += -finstrument-functions
701endif
702
KOVACS Krisztianb3e54fe2014-11-17 15:11:45 +0100703ifneq ($(USE_NS),)
704OPTIONS_CFLAGS += -DCONFIG_HAP_NS
705BUILD_OPTIONS += $(call ignore_implicit,USE_NS)
706endif
707
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100708#### Global link options
709# These options are added at the end of the "ld" command line. Use LDFLAGS to
710# add options at the beginning of the "ld" command line if needed.
711LDOPTS = $(TARGET_LDFLAGS) $(OPTIONS_LDFLAGS) $(ADDLIB)
willy tarreau0f7af912005-12-17 12:21:26 +0100712
Willy Tarreaue4208cb2008-03-11 06:37:39 +0100713ifeq ($(TARGET),)
714all:
715 @echo
716 @echo "Due to too many reports of suboptimized setups, building without"
717 @echo "specifying the target is no longer supported. Please specify the"
718 @echo "target OS in the TARGET variable, in the following form:"
719 @echo
720 @echo " $ make TARGET=xxx"
721 @echo
722 @echo "Please choose the target among the following supported list :"
723 @echo
Willy Tarreaue0c623d2012-06-04 00:42:09 +0200724 @echo " linux2628, linux26, linux24, linux24e, linux22, solaris"
Yitzhak Sapir32087312009-06-14 18:27:54 +0200725 @echo " freebsd, openbsd, cygwin, custom, generic"
Willy Tarreaue4208cb2008-03-11 06:37:39 +0100726 @echo
727 @echo "Use \"generic\" if you don't want any optimization, \"custom\" if you"
728 @echo "want to precisely tweak every option, or choose the target which"
729 @echo "matches your OS the most in order to gain the maximum performance"
730 @echo "out of it. Please check the Makefile in case of doubts."
731 @echo
732 @exit 1
733else
Willy Tarreaubc289da2014-05-10 12:16:21 +0200734all: haproxy $(EXTRA)
Willy Tarreaue4208cb2008-03-11 06:37:39 +0100735endif
willy tarreau0f7af912005-12-17 12:21:26 +0100736
Willy Tarreau94965522015-08-10 19:10:52 +0200737OBJS = src/haproxy.o src/base64.o src/protocol.o \
Willy Tarreauc7e42382012-08-24 19:22:53 +0200738 src/uri_auth.o src/standard.o src/buffer.o src/log.o src/task.o \
Willy Tarreaub5684e02015-04-27 11:59:40 +0200739 src/chunk.o src/channel.o src/listener.o src/lru.o src/xxhash.o \
Willy Tarreau982b6e32009-01-25 13:49:53 +0100740 src/time.o src/fd.o src/pipe.o src/regex.o src/cfgparse.o src/server.o \
Emeric Brun2b920a12010-09-23 18:30:22 +0200741 src/checks.o src/queue.o src/frontend.o src/proxy.o src/peers.o \
Willy Tarreau59f98392012-07-06 14:13:49 +0200742 src/arg.o src/stick_table.o src/proto_uxst.o src/connection.o \
Willy Tarreau94965522015-08-10 19:10:52 +0200743 src/proto_http.o src/raw_sock.o src/backend.o \
Willy Tarreauf09c6602012-02-13 17:12:08 +0100744 src/lb_chash.o src/lb_fwlc.o src/lb_fwrr.o src/lb_map.o src/lb_fas.o \
Willy Tarreau81f38d62015-04-13 17:11:11 +0200745 src/stream_interface.o src/dumpstats.o src/proto_tcp.o src/applet.o \
Willy Tarreaub1ec8c42015-04-03 13:53:24 +0200746 src/session.o src/stream.o src/hdr_idx.o src/ev_select.o src/signal.o \
Baptiste Assmann5d4e4f72015-04-13 23:08:16 +0200747 src/acl.o src/sample.o src/memory.o src/freq_ctr.o src/auth.o src/proto_udp.o \
KOVACS Krisztianb3e54fe2014-11-17 15:11:45 +0100748 src/compression.o src/payload.o src/hash.o src/pattern.o src/map.o \
Thierry FOURNIER4834bc72015-06-06 19:29:07 +0200749 src/namespace.o src/mailers.o src/dns.o src/vars.o
Willy Tarreaubaaee002006-06-26 02:48:02 +0200750
Willy Tarreau45cb4fb2009-10-26 21:10:04 +0100751EBTREE_OBJS = $(EBTREE_DIR)/ebtree.o \
752 $(EBTREE_DIR)/eb32tree.o $(EBTREE_DIR)/eb64tree.o \
753 $(EBTREE_DIR)/ebmbtree.o $(EBTREE_DIR)/ebsttree.o \
754 $(EBTREE_DIR)/ebimtree.o $(EBTREE_DIR)/ebistree.o
755
Willy Tarreau7de211c2012-05-25 23:53:16 +0200756ifneq ($(TRACE),)
757OBJS += src/trace.o
758endif
759
Marc-Antoine Perennoued9803e2013-02-12 10:53:53 +0100760WRAPPER_OBJS = src/haproxy-systemd-wrapper.o
761
Willy Tarreau45cb4fb2009-10-26 21:10:04 +0100762# Not used right now
763LIB_EBTREE = $(EBTREE_DIR)/libebtree.a
764
765haproxy: $(OBJS) $(OPTIONS_OBJS) $(EBTREE_OBJS)
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100766 $(LD) $(LDFLAGS) -o $@ $^ $(LDOPTS)
willy tarreau0f7af912005-12-17 12:21:26 +0100767
Marc-Antoine Perennoued9803e2013-02-12 10:53:53 +0100768haproxy-systemd-wrapper: $(WRAPPER_OBJS)
769 $(LD) $(LDFLAGS) -o $@ $^ $(LDOPTS)
770
Willy Tarreau45cb4fb2009-10-26 21:10:04 +0100771$(LIB_EBTREE): $(EBTREE_OBJS)
772 $(AR) rv $@ $^
773
Willy Tarreaubaaee002006-06-26 02:48:02 +0200774objsize: haproxy
775 @objdump -t $^|grep ' g '|grep -F '.text'|awk '{print $$5 FS $$6}'|sort
776
willy tarreau0f7af912005-12-17 12:21:26 +0100777%.o: %.c
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100778 $(CC) $(COPTS) -c -o $@ $<
willy tarreau0f7af912005-12-17 12:21:26 +0100779
Willy Tarreau7de211c2012-05-25 23:53:16 +0200780src/trace.o: src/trace.c
781 $(CC) $(TRACE_COPTS) -c -o $@ $<
782
Willy Tarreau7b066db2007-12-02 11:28:59 +0100783src/haproxy.o: src/haproxy.c
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100784 $(CC) $(COPTS) \
785 -DBUILD_TARGET='"$(strip $(TARGET))"' \
Willy Tarreauef7341d2009-04-11 19:45:50 +0200786 -DBUILD_ARCH='"$(strip $(ARCH))"' \
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100787 -DBUILD_CPU='"$(strip $(CPU))"' \
788 -DBUILD_CC='"$(strip $(CC))"' \
789 -DBUILD_CFLAGS='"$(strip $(VERBOSE_CFLAGS))"' \
790 -DBUILD_OPTIONS='"$(strip $(BUILD_OPTIONS))"' \
791 -c -o $@ $<
Willy Tarreau7b066db2007-12-02 11:28:59 +0100792
Marc-Antoine Perennoued9803e2013-02-12 10:53:53 +0100793src/haproxy-systemd-wrapper.o: src/haproxy-systemd-wrapper.c
794 $(CC) $(COPTS) \
795 -DSBINDIR='"$(strip $(SBINDIR))"' \
796 -c -o $@ $<
797
Willy Tarreauf2ef8c52007-07-11 09:19:31 +0200798src/dlmalloc.o: $(DLMALLOC_SRC)
Willy Tarreau9f2b7302008-01-02 20:48:34 +0100799 $(CC) $(COPTS) -DDEFAULT_MMAP_THRESHOLD=$(DLMALLOC_THRES) -c -o $@ $<
Willy Tarreauf2ef8c52007-07-11 09:19:31 +0200800
Christian Wiese19b50292008-03-12 15:57:54 +0200801install-man:
Arcadiy Ivanov37853112014-11-04 07:06:13 -0500802 install -d "$(DESTDIR)$(MANDIR)"/man1
803 install -m 644 doc/haproxy.1 "$(DESTDIR)$(MANDIR)"/man1
Christian Wiese19b50292008-03-12 15:57:54 +0200804
Christian Wiesebf34eb42008-03-12 17:24:49 +0200805install-doc:
Arcadiy Ivanov37853112014-11-04 07:06:13 -0500806 install -d "$(DESTDIR)$(DOCDIR)"
Christian Wiesebf34eb42008-03-12 17:24:49 +0200807 for x in configuration architecture haproxy-en haproxy-fr; do \
Arcadiy Ivanov37853112014-11-04 07:06:13 -0500808 install -m 644 doc/$$x.txt "$(DESTDIR)$(DOCDIR)" ; \
Christian Wiesebf34eb42008-03-12 17:24:49 +0200809 done
810
Marc-Antoine Perennoued9803e2013-02-12 10:53:53 +0100811install-bin: haproxy haproxy-systemd-wrapper
Arcadiy Ivanov37853112014-11-04 07:06:13 -0500812 install -d "$(DESTDIR)$(SBINDIR)"
813 install haproxy "$(DESTDIR)$(SBINDIR)"
814 install haproxy-systemd-wrapper "$(DESTDIR)$(SBINDIR)"
Christian Wiesea184aa22008-03-12 15:25:35 +0200815
Christian Wiesedb5238d2008-03-12 18:28:13 +0200816install: install-bin install-man install-doc
Christian Wiese4cf5d572008-03-12 16:21:05 +0200817
Ilyas Bakirovdfb124f2015-02-04 17:14:26 +0600818uninstall:
819 rm -f "$(DESTDIR)$(MANDIR)"/man1/haproxy.1
820 for x in configuration architecture haproxy-en haproxy-fr; do \
821 rm -f "$(DESTDIR)$(DOCDIR)"/$$x.txt ; \
822 done
823 -rmdir "$(DESTDIR)$(DOCDIR)"
824 rm -f "$(DESTDIR)$(SBINDIR)"/haproxy
825 rm -f "$(DESTDIR)$(SBINDIR)"/haproxy-systemd-wrapper
826
willy tarreau0f7af912005-12-17 12:21:26 +0100827clean:
Willy Tarreau45cb4fb2009-10-26 21:10:04 +0100828 rm -f *.[oas] src/*.[oas] ebtree/*.[oas] haproxy test
829 for dir in . src include/* doc ebtree; do rm -f $$dir/*~ $$dir/*.rej $$dir/core; done
Willy Tarreau9bf6c6e2006-12-23 11:12:04 +0100830 rm -f haproxy-$(VERSION).tar.gz haproxy-$(VERSION)$(SUBVERS).tar.gz
Willy Tarreau689e4d72013-12-10 09:31:06 +0100831 rm -f haproxy-$(VERSION) haproxy-$(VERSION)$(SUBVERS) nohup.out gmon.out
Marc-Antoine Perennoued9803e2013-02-12 10:53:53 +0100832 rm -f haproxy-systemd-wrapper
willy tarreauefae1842005-12-17 12:51:03 +0100833
Willy Tarreauebe0af42009-10-10 22:20:44 +0200834tags:
Willy Tarreau42d2c6c2010-03-29 09:35:20 +0200835 find src include \( -name '*.c' -o -name '*.h' \) -print0 | \
Willy Tarreauebe0af42009-10-10 22:20:44 +0200836 xargs -0 etags --declarations --members
837
William Lallemand9e5cc8d2013-10-18 16:26:39 +0200838cscope:
839 find src include -name "*.[ch]" -print | cscope -q -b -i -
840
willy tarreaue114bf92006-03-19 21:30:14 +0100841tar: clean
Willy Tarreau689e4d72013-12-10 09:31:06 +0100842 ln -s . haproxy-$(VERSION)$(SUBVERS)
843 tar --exclude=haproxy-$(VERSION)$(SUBVERS)/.git \
844 --exclude=haproxy-$(VERSION)$(SUBVERS)/haproxy-$(VERSION)$(SUBVERS) \
845 --exclude=haproxy-$(VERSION)$(SUBVERS)/haproxy-$(VERSION)$(SUBVERS).tar.gz \
846 -cf - haproxy-$(VERSION)$(SUBVERS)/* | gzip -c9 >haproxy-$(VERSION)$(SUBVERS).tar.gz
847 rm -f haproxy-$(VERSION)$(SUBVERS)
willy tarreaucee272f2006-03-19 21:16:26 +0100848
Willy Tarreau05ed29c2012-12-20 15:00:44 +0100849git-tar:
Willy Tarreau689e4d72013-12-10 09:31:06 +0100850 git archive --format=tar --prefix="haproxy-$(VERSION)$(SUBVERS)/" HEAD | gzip -9 > haproxy-$(VERSION)$(SUBVERS).tar.gz
Willy Tarreauec692562007-09-09 23:31:11 +0200851
852version:
853 @echo "VERSION: $(VERSION)"
854 @echo "SUBVERS: $(SUBVERS)"
855 @echo "VERDATE: $(VERDATE)"
856
857# never use this one if you don't know what it is used for.
858update-version:
859 @echo "Ready to update the following versions :"
860 @echo "VERSION: $(VERSION)"
861 @echo "SUBVERS: $(SUBVERS)"
862 @echo "VERDATE: $(VERDATE)"
863 @echo "Press [ENTER] to continue or Ctrl-C to abort now.";read
864 echo "$(VERSION)" > VERSION
865 echo "$(SUBVERS)" > SUBVERS
866 echo "$(VERDATE)" > VERDATE