Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / f2716381cf78825a36ffb232c9e827e568828cbd / . / board / amlogic / p212 / README.khadas-vim
blob: a2c7606454f8beed93cd52bedebe0584704752a8 [file] [log] [blame]
Neil Armstrong83256d82017-11-27 10:16:20 +0100[diff] [blame]1U-Boot for Khadas VIM
2=======================
3
Neil Armstrongb0e9f292018-01-02 13:34:59 +0100[diff] [blame]4Khadas VIM is an Open Source DIY Box manufactured by Shenzhen Wesion
Neil Armstrong83256d82017-11-27 10:16:20 +0100[diff] [blame]5Technology Co., Ltd with the following specifications:
6
Neil Armstrong6be6a2f2018-06-27 17:19:02 +0200[diff] [blame]7 - Amlogic S905X ARM Cortex-A53 quad-core SoC @ 1.5GHz
Neil Armstrong83256d82017-11-27 10:16:20 +0100[diff] [blame]8 - ARM Mali 450 GPU
9 - 2GB DDR3 SDRAM
10 - 10/100 Ethernet
11 - HDMI 2.0 4K/60Hz display
12 - 40-pin GPIO header
13 - 2 x USB 2.0 Host, 1 x USB 2.0 Type-C OTG
14 - 8GB/16GBeMMC
15 - microSD
16 - SDIO Wifi Module, Bluetooth
17 - Two channels IR receiver
18
19Currently the u-boot port supports the following devices:
20 - serial
21 - eMMC, microSD
22 - Ethernet
Neil Armstrong6be6a2f2018-06-27 17:19:02 +0200[diff] [blame]23 - I2C
24 - Regulators
25 - Reset controller
26 - Clock controller
27 - USB Host
28 - ADC
Neil Armstrong83256d82017-11-27 10:16:20 +0100[diff] [blame]29
30U-Boot compilation
31==================
32
33 > export ARCH=arm
34 > export CROSS_COMPILE=aarch64-none-elf-
35 > make khadas-vim_defconfig
36 > make
37
38Image creation
39==============
40
41Amlogic doesn't provide sources for the firmware and for tools needed
42to create the bootloader image, so it is necessary to obtain them from
43the git tree published by the board vendor:
44
45 > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
46 > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
47 > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
48 > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
49 > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
50 > git clone https://github.com/khadas/u-boot -b Vim vim-u-boot
51 > cd vim-u-boot
52 > make kvim_defconfig
Andreas Färber38f43d12019-07-01 10:25:08 +0200[diff] [blame]53 > make CROSS_COMPILE=aarch64-none-elf-
Neil Armstrong83256d82017-11-27 10:16:20 +0100[diff] [blame]54 > export FIPDIR=$PWD/fip
55
56Go back to mainline U-Boot source tree then :
57 > mkdir fip
58
59 > cp $FIPDIR/gxl/bl2.bin fip/
60 > cp $FIPDIR/gxl/acs.bin fip/
61 > cp $FIPDIR/gxl/bl21.bin fip/
62 > cp $FIPDIR/gxl/bl30.bin fip/
63 > cp $FIPDIR/gxl/bl301.bin fip/
64 > cp $FIPDIR/gxl/bl31.img fip/
65 > cp u-boot.bin fip/bl33.bin
66
67 > $FIPDIR/blx_fix.sh \
68 fip/bl30.bin \
69 fip/zero_tmp \
70 fip/bl30_zero.bin \
71 fip/bl301.bin \
72 fip/bl301_zero.bin \
73 fip/bl30_new.bin \
74 bl30
75
Loic Devulder9f1f2c72018-07-13 11:36:07 +0200[diff] [blame]76 > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
Neil Armstrong83256d82017-11-27 10:16:20 +0100[diff] [blame]77
78 > $FIPDIR/blx_fix.sh \
79 fip/bl2_acs.bin \
80 fip/zero_tmp \
81 fip/bl2_zero.bin \
82 fip/bl21.bin \
83 fip/bl21_zero.bin \
84 fip/bl2_new.bin \
85 bl2
86
87 > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
88 > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img
89 > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
90 > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
91 > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \
92 --output fip/u-boot.bin \
93 --bl2 fip/bl2.n.bin.sig \
94 --bl30 fip/bl30_new.bin.enc \
95 --bl31 fip/bl31.img.enc \
96 --bl33 fip/bl33.bin.enc
97
98and then write the image to SD with:
99
100 > DEV=/dev/your_sd_device
101 > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
102 > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444