Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / f1f03cf993ebb6c8926d377353bc502aa016a461 / . / include / configs / UCP1020.h
blob: 902abc48cecc7fa36055cd2864497209854d8682 [file] [log] [blame]
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]1/*
2 * Copyright 2013-2015 Arcturus Networks, Inc.
3 * http://www.arcturusnetworks.com/products/ucp1020/
4 * based on include/configs/p1_p2_rdb_pc.h
5 * original copyright follows:
6 * Copyright 2009-2011 Freescale Semiconductor, Inc.
7 *
8 * SPDX-License-Identifier: GPL-2.0+
9 */
10
11/*
12 * QorIQ uCP1020-xx boards configuration file
13 */
14#ifndef __CONFIG_H
15#define __CONFIG_H
16
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]17#define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */
18#define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */
19#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
20#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
21#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
22#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
23
24#if defined(CONFIG_TARTGET_UCP1020T1)
25
26#define CONFIG_UCP1020_REV_1_3
27
28#define CONFIG_BOARDNAME "uCP1020-64EE512-0U1-XR-T1"
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]29
30#define CONFIG_TSEC_ENET
31#define CONFIG_TSEC1
32#define CONFIG_TSEC3
33#define CONFIG_HAS_ETH0
34#define CONFIG_HAS_ETH1
35#define CONFIG_ETHADDR 00:19:D3:FF:FF:FF
36#define CONFIG_ETH1ADDR 00:19:D3:FF:FF:FE
37#define CONFIG_ETH2ADDR 00:19:D3:FF:FF:FD
38#define CONFIG_IPADDR 10.80.41.229
39#define CONFIG_SERVERIP 10.80.41.227
40#define CONFIG_NETMASK 255.255.252.0
41#define CONFIG_ETHPRIME "eTSEC3"
42
43#ifndef CONFIG_SPI_FLASH
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]44#endif
45#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
46
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]47#define CONFIG_SYS_L2_SIZE (256 << 10)
48
49#define CONFIG_LAST_STAGE_INIT
50
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]51#endif
52
53#if defined(CONFIG_TARGET_UCP1020)
54
55#define CONFIG_UCP1020
56#define CONFIG_UCP1020_REV_1_3
57
58#define CONFIG_BOARDNAME_LOCAL "uCP1020-64EEE512-OU1-XR"
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]59
60#define CONFIG_TSEC_ENET
61#define CONFIG_TSEC1
62#define CONFIG_TSEC2
63#define CONFIG_TSEC3
64#define CONFIG_HAS_ETH0
65#define CONFIG_HAS_ETH1
66#define CONFIG_HAS_ETH2
67#define CONFIG_ETHADDR 00:06:3B:FF:FF:FF
68#define CONFIG_ETH1ADDR 00:06:3B:FF:FF:FE
69#define CONFIG_ETH2ADDR 00:06:3B:FF:FF:FD
70#define CONFIG_IPADDR 192.168.1.81
71#define CONFIG_IPADDR1 192.168.1.82
72#define CONFIG_IPADDR2 192.168.1.83
73#define CONFIG_SERVERIP 192.168.1.80
74#define CONFIG_GATEWAYIP 102.168.1.1
75#define CONFIG_NETMASK 255.255.255.0
76#define CONFIG_ETHPRIME "eTSEC1"
77
78#ifndef CONFIG_SPI_FLASH
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]79#endif
80#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
81
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]82#define CONFIG_SYS_L2_SIZE (256 << 10)
83
84#define CONFIG_LAST_STAGE_INIT
85
86#endif
87
88#ifdef CONFIG_SDCARD
89#define CONFIG_RAMBOOT_SDCARD
90#define CONFIG_SYS_RAMBOOT
91#define CONFIG_SYS_EXTRA_ENV_RELOC
92#define CONFIG_SYS_TEXT_BASE 0x11000000
93#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
94#endif
95
96#ifdef CONFIG_SPIFLASH
97#define CONFIG_RAMBOOT_SPIFLASH
98#define CONFIG_SYS_RAMBOOT
99#define CONFIG_SYS_EXTRA_ENV_RELOC
100#define CONFIG_SYS_TEXT_BASE 0x11000000
101#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
102#endif
103
104#ifndef CONFIG_SYS_TEXT_BASE
105#define CONFIG_SYS_TEXT_BASE 0xeff80000
106#endif
107#define CONFIG_SYS_TEXT_BASE_NOR 0xeff80000
108
109#ifndef CONFIG_RESET_VECTOR_ADDRESS
110#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
111#endif
112
113#ifndef CONFIG_SYS_MONITOR_BASE
114#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
115#endif
116
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]117#define CONFIG_MP
118
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]119#define CONFIG_ENV_OVERWRITE
120
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]121#define CONFIG_SATA_SIL
122#define CONFIG_SYS_SATA_MAX_DEVICE 2
123#define CONFIG_LIBATA
124#define CONFIG_LBA48
125
126#define CONFIG_SYS_CLK_FREQ 66666666
127#define CONFIG_DDR_CLK_FREQ 66666666
128
129#define CONFIG_HWCONFIG
130
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]131/*
132 * These can be toggled for performance analysis, otherwise use default.
133 */
134#define CONFIG_L2_CACHE
135#define CONFIG_BTB
136
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]137#define CONFIG_ENABLE_36BIT_PHYS
138
139#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
140#define CONFIG_SYS_MEMTEST_END 0x1fffffff
141#define CONFIG_PANIC_HANG /* do not reset board on panic */
142
143#define CONFIG_SYS_CCSRBAR 0xffe00000
144#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
145
146/* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
147 SPL code*/
148#ifdef CONFIG_SPL_BUILD
149#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
150#endif
151
152/* DDR Setup */
153#define CONFIG_DDR_ECC_ENABLE
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]154#ifndef CONFIG_DDR_ECC_ENABLE
155#define CONFIG_SYS_DDR_RAW_TIMING
156#define CONFIG_DDR_SPD
157#endif
158#define CONFIG_SYS_SPD_BUS_NUM 1
159#undef CONFIG_FSL_DDR_INTERACTIVE
160
161#define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_512M
162#define CONFIG_CHIP_SELECTS_PER_CTRL 1
163#define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
164#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
165#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
166
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]167#define CONFIG_DIMM_SLOTS_PER_CTLR 1
168
169/* Default settings for DDR3 */
170#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f
171#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302
172#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000
173#define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f
174#define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302
175#define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000
176
177#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
178#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
179#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
180#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
181
182#define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600
183#define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655A608
184#define CONFIG_SYS_DDR_SR_CNTR 0x00000000
185#define CONFIG_SYS_DDR_RCW_1 0x00000000
186#define CONFIG_SYS_DDR_RCW_2 0x00000000
187#ifdef CONFIG_DDR_ECC_ENABLE
188#define CONFIG_SYS_DDR_CONTROL 0xE70C0000 /* Type = DDR3 & ECC */
189#else
190#define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */
191#endif
192#define CONFIG_SYS_DDR_CONTROL_2 0x04401050
193#define CONFIG_SYS_DDR_TIMING_4 0x00220001
194#define CONFIG_SYS_DDR_TIMING_5 0x03402400
195
196#define CONFIG_SYS_DDR_TIMING_3 0x00020000
197#define CONFIG_SYS_DDR_TIMING_0 0x00330004
198#define CONFIG_SYS_DDR_TIMING_1 0x6f6B4846
199#define CONFIG_SYS_DDR_TIMING_2 0x0FA8C8CF
200#define CONFIG_SYS_DDR_CLK_CTRL 0x03000000
201#define CONFIG_SYS_DDR_MODE_1 0x40461520
202#define CONFIG_SYS_DDR_MODE_2 0x8000c000
203#define CONFIG_SYS_DDR_INTERVAL 0x0C300000
204
205#undef CONFIG_CLOCKS_IN_MHZ
206
207/*
208 * Memory map
209 *
210 * 0x0000_0000 0x7fff_ffff DDR Up to 2GB cacheable
211 * 0x8000_0000 0xdfff_ffff PCI Express Mem 1G non-cacheable(PCIe * 2)
212 * 0xec00_0000 0xefff_ffff NOR flash Up to 64M non-cacheable CS0/1
213 * 0xf8f8_0000 0xf8ff_ffff L2 SRAM Up to 256K cacheable
214 * (early boot only)
215 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable
216 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable
217 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
218 */
219
220/*
221 * Local Bus Definitions
222 */
223#define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */
224#define CONFIG_SYS_FLASH_BASE 0xec000000
225
226#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
227
228#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
229 | BR_PS_16 | BR_V)
230
231#define CONFIG_FLASH_OR_PRELIM 0xfc000ff7
232
233#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
234#define CONFIG_SYS_FLASH_QUIET_TEST
235#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
236
237#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
238
239#undef CONFIG_SYS_FLASH_CHECKSUM
240#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
241#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
242
243#define CONFIG_FLASH_CFI_DRIVER
244#define CONFIG_SYS_FLASH_CFI
245#define CONFIG_SYS_FLASH_EMPTY_INFO
246#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
247
248#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
249
250#define CONFIG_SYS_INIT_RAM_LOCK
251#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
252/* Initial L1 address */
253#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR
254#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
255#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
256/* Size of used area in RAM */
257#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
258
259#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
260 GENERATED_GBL_DATA_SIZE)
261#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
262
263#define CONFIG_SYS_MONITOR_LEN (256 * 1024)/* Reserve 256 kB for Mon */
264#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */
265
266#define CONFIG_SYS_PMC_BASE 0xff980000
267#define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE
268#define CONFIG_PMC_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
269 BR_PS_8 | BR_V)
270#define CONFIG_PMC_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
271 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
272 OR_GPCM_EAD)
273
274#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
275#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
276#ifdef CONFIG_NAND_FSL_ELBC
277#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
278#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
279#endif
280
281/* Serial Port - controlled on board with jumper J8
282 * open - index 2
283 * shorted - index 1
284 */
285#define CONFIG_CONS_INDEX 1
286#undef CONFIG_SERIAL_SOFTWARE_FIFO
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]287#define CONFIG_SYS_NS16550_SERIAL
288#define CONFIG_SYS_NS16550_REG_SIZE 1
289#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
290#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
291#define CONFIG_NS16550_MIN_FUNCTIONS
292#endif
293
294#define CONFIG_SYS_BAUDRATE_TABLE \
295 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
296
297#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
298#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
299
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]300/* I2C */
301#define CONFIG_SYS_I2C
302#define CONFIG_SYS_I2C_FSL
303#define CONFIG_SYS_FSL_I2C_SPEED 400000
304#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
305#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
306#define CONFIG_SYS_FSL_I2C2_SPEED 400000
307#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
308#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
309#define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} }
310#define CONFIG_SYS_SPD_BUS_NUM 1 /* For rom_loc and flash bank */
311
312#define CONFIG_RTC_DS1337
Chris Packham2d3ac512017-05-30 12:03:33 +1200[diff] [blame]313#define CONFIG_RTC_DS1337_NOOSC
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]314#define CONFIG_SYS_I2C_RTC_ADDR 0x68
315#define CONFIG_SYS_I2C_PCA9557_ADDR 0x18
316#define CONFIG_SYS_I2C_NCT72_ADDR 0x4C
317#define CONFIG_SYS_I2C_IDT6V49205B 0x69
318
319/*
320 * eSPI - Enhanced SPI
321 */
322#define CONFIG_HARD_SPI
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]323
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]324#define CONFIG_SF_DEFAULT_SPEED 10000000
325#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
326
327#if defined(CONFIG_PCI)
328/*
329 * General PCI
330 * Memory space is mapped 1-1, but I/O space must start from 0.
331 */
332
333/* controller 2, direct to uli, tgtid 2, Base address 9000 */
334#define CONFIG_SYS_PCIE2_NAME "PCIe SLOT CON9"
335#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
336#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
337#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
338#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
339#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000
340#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
341#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000
342#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
343
344/* controller 1, Slot 2, tgtid 1, Base address a000 */
345#define CONFIG_SYS_PCIE1_NAME "PCIe SLOT CON10"
346#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
347#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
348#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
349#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
350#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000
351#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
352#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000
353#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
354
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]355#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]356#endif /* CONFIG_PCI */
357
358/*
359 * Environment
360 */
361#ifdef CONFIG_ENV_FIT_UCBOOT
362
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]363#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x20000)
364#define CONFIG_ENV_SIZE 0x20000
365#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
366
367#else
368
369#define CONFIG_ENV_SPI_BUS 0
370#define CONFIG_ENV_SPI_CS 0
371#define CONFIG_ENV_SPI_MAX_HZ 10000000
372#define CONFIG_ENV_SPI_MODE 0
373
374#ifdef CONFIG_RAMBOOT_SPIFLASH
375
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]376#define CONFIG_ENV_SIZE 0x3000 /* 12KB */
377#define CONFIG_ENV_OFFSET 0x2000 /* 8KB */
378#define CONFIG_ENV_SECT_SIZE 0x1000
379
380#if defined(CONFIG_SYS_REDUNDAND_ENVIRONMENT)
381/* Address and size of Redundant Environment Sector */
382#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
383#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
384#endif
385
386#elif defined(CONFIG_RAMBOOT_SDCARD)
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]387#define CONFIG_FSL_FIXED_MMC_LOCATION
388#define CONFIG_ENV_SIZE 0x2000
389#define CONFIG_SYS_MMC_ENV_DEV 0
390
391#elif defined(CONFIG_SYS_RAMBOOT)
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]392#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
393#define CONFIG_ENV_SIZE 0x2000
394
395#else
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]396#define CONFIG_ENV_BASE (CONFIG_SYS_FLASH_BASE)
397#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
398#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
399#define CONFIG_ENV_ADDR (CONFIG_ENV_BASE + 0xC0000)
400#if defined(CONFIG_SYS_REDUNDAND_ENVIRONMENT)
401/* Address and size of Redundant Environment Sector */
402#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
403#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
404#endif
405
406#endif
407
408#endif /* CONFIG_ENV_FIT_UCBOOT */
409
410#define CONFIG_LOADS_ECHO /* echo on for serial download */
411#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
412
413/*
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]414 * USB
415 */
416#define CONFIG_HAS_FSL_DR_USB
417
418#if defined(CONFIG_HAS_FSL_DR_USB)
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]419#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
420
Tom Riniceed5d22017-05-12 22:33:27 -0400[diff] [blame]421#ifdef CONFIG_USB_EHCI_HCD
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]422#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
423#define CONFIG_USB_EHCI_FSL
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]424#endif
425#endif
426
427#undef CONFIG_WATCHDOG /* watchdog disabled */
428
429#ifdef CONFIG_MMC
430#define CONFIG_FSL_ESDHC
431#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]432#define CONFIG_MMC_SPI
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]433#endif
434
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]435/* Misc Extra Settings */
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]436#undef CONFIG_WATCHDOG /* watchdog disabled */
437
438/*
439 * Miscellaneous configurable options
440 */
441#define CONFIG_SYS_LONGHELP /* undef to save memory */
442#define CONFIG_CMDLINE_EDITING /* Command-line editing */
443#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]444#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */
445
446/*
447 * For booting Linux, the board info and command line data
448 * have to be in the first 64 MB of memory, since this is
449 * the maximum mapped by the Linux kernel during initialization.
450 */
451#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/
452#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
453
454#if defined(CONFIG_CMD_KGDB)
455#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
456#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
457#endif
458
459/*
460 * Environment Configuration
461 */
462
463#if defined(CONFIG_TSEC_ENET)
464
Alexandru Gagniuc05572632017-07-07 11:36:58 -0700[diff] [blame]465#if defined(CONFIG_UCP1020_REV_1_2) || defined(CONFIG_UCP1020_REV_1_3)
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]466#else
467#error "UCP1020 module revision is not defined !!!"
468#endif
469
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]470#define CONFIG_BOOTP_SERVERIP
471
472#define CONFIG_MII /* MII PHY management */
473#define CONFIG_TSEC1_NAME "eTSEC1"
474#define CONFIG_TSEC2_NAME "eTSEC2"
475#define CONFIG_TSEC3_NAME "eTSEC3"
476
477#define TSEC1_PHY_ADDR 4
478#define TSEC2_PHY_ADDR 0
479#define TSEC2_PHY_ADDR_SGMII 0x00
480#define TSEC3_PHY_ADDR 6
481
482#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
483#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
484#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
485
486#define TSEC1_PHYIDX 0
487#define TSEC2_PHYIDX 0
488#define TSEC3_PHYIDX 0
489
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]490#endif
491
492#define CONFIG_HOSTNAME UCP1020
493#define CONFIG_ROOTPATH "/opt/nfsroot"
494#define CONFIG_BOOTFILE "uImage"
495#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
496
497/* default location for tftp and bootm */
498#define CONFIG_LOADADDR 1000000
499
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]500#if defined(CONFIG_DONGLE)
501
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]502#define CONFIG_EXTRA_ENV_SETTINGS \
503"bootcmd=run prog_spi_mbrbootcramfs\0" \
504"bootfile=uImage\0" \
505"consoledev=ttyS0\0" \
506"cramfsfile=image.cramfs\0" \
507"dtbaddr=0x00c00000\0" \
508"dtbfile=image.dtb\0" \
509"ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
510"eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" \
511"eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" \
512"fileaddr=0x01000000\0" \
513"filesize=0x00080000\0" \
514"flashmbr=sf probe 0; " \
515 "tftp $loadaddr $mbr; " \
516 "sf erase $mbr_offset +$filesize; " \
517 "sf write $loadaddr $mbr_offset $filesize\0" \
518"flashrecovery=tftp $recoveryaddr $cramfsfile; " \
519 "protect off $nor_recoveryaddr +$filesize; " \
520 "erase $nor_recoveryaddr +$filesize; " \
521 "cp.b $recoveryaddr $nor_recoveryaddr $filesize; " \
522 "protect on $nor_recoveryaddr +$filesize\0 " \
523"flashuboot=tftp $ubootaddr $ubootfile; " \
524 "protect off $nor_ubootaddr +$filesize; " \
525 "erase $nor_ubootaddr +$filesize; " \
526 "cp.b $ubootaddr $nor_ubootaddr $filesize; " \
527 "protect on $nor_ubootaddr +$filesize\0 " \
528"flashworking=tftp $workingaddr $cramfsfile; " \
529 "protect off $nor_workingaddr +$filesize; " \
530 "erase $nor_workingaddr +$filesize; " \
531 "cp.b $workingaddr $nor_workingaddr $filesize; " \
532 "protect on $nor_workingaddr +$filesize\0 " \
533"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 " \
534"kerneladdr=0x01100000\0" \
535"kernelfile=uImage\0" \
536"loadaddr=0x01000000\0" \
537"mbr=uCP1020d.mbr\0" \
538"mbr_offset=0x00000000\0" \
539"mmbr=uCP1020Quiet.mbr\0" \
540"mmcpart=0:2\0" \
541"mmc__mbrd=fatload mmc $mmcpart $loadaddr $mbr; " \
542 "mmc erase 1 1; " \
543 "mmc write $loadaddr 1 1\0" \
544"mmc__uboot=fatload mmc $mmcpart $loadaddr $ubootfile; " \
545 "mmc erase 0x40 0x400; " \
546 "mmc write $loadaddr 0x40 0x400\0" \
547"netdev=eth0\0" \
548"nor_recoveryaddr=0xEC0A0000\0" \
549"nor_ubootaddr=0xEFF80000\0" \
550"nor_workingaddr=0xECFA0000\0" \
551"norbootrecovery=setenv bootargs $recoverybootargs" \
552 " console=$consoledev,$baudrate $othbootargs; " \
553 "run norloadrecovery; " \
554 "bootm $kerneladdr - $dtbaddr\0" \
555"norbootworking=setenv bootargs $workingbootargs" \
556 " console=$consoledev,$baudrate $othbootargs; " \
557 "run norloadworking; " \
558 "bootm $kerneladdr - $dtbaddr\0" \
559"norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; " \
560 "setenv cramfsaddr $nor_recoveryaddr; " \
561 "cramfsload $dtbaddr $dtbfile; " \
562 "cramfsload $kerneladdr $kernelfile\0" \
563"norloadworking=mw.l $kerneladdr 0x0 0x00a00000; " \
564 "setenv cramfsaddr $nor_workingaddr; " \
565 "cramfsload $dtbaddr $dtbfile; " \
566 "cramfsload $kerneladdr $kernelfile\0" \
567"prog_spi_mbr=run spi__mbr\0" \
568"prog_spi_mbrboot=run spi__mbr; run spi__boot1; run spi__boot2\0" \
569"prog_spi_mbrbootcramfs=run spi__mbr; run spi__boot1; run spi__boot2; " \
570 "run spi__cramfs\0" \
571"ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro" \
572 " console=$consoledev,$baudrate $othbootargs; " \
573 "tftp $rootfsaddr $rootfsfile; " \
574 "tftp $loadaddr $kernelfile; " \
575 "tftp $dtbaddr $dtbfile; " \
576 "bootm $loadaddr $rootfsaddr $dtbaddr\0" \
577"ramdisk_size=120000\0" \
578"ramdiskfile=rootfs.ext2.gz.uboot\0" \
579"recoveryaddr=0x02F00000\0" \
580"recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0" \
581"releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \
582 "mw.l 0xffe0f008 0x00400000\0" \
583"rootfsaddr=0x02F00000\0" \
584"rootfsfile=rootfs.ext2.gz.uboot\0" \
585"rootpath=/opt/nfsroot\0" \
586"spi__boot1=fatload mmc $mmcpart $loadaddr u-boot.bin; " \
587 "protect off 0xeC000000 +$filesize; " \
588 "erase 0xEC000000 +$filesize; " \
589 "cp.b $loadaddr 0xEC000000 $filesize; " \
590 "cmp.b $loadaddr 0xEC000000 $filesize; " \
591 "protect on 0xeC000000 +$filesize\0" \
592"spi__boot2=fatload mmc $mmcpart $loadaddr u-boot.bin; " \
593 "protect off 0xeFF80000 +$filesize; " \
594 "erase 0xEFF80000 +$filesize; " \
595 "cp.b $loadaddr 0xEFF80000 $filesize; " \
596 "cmp.b $loadaddr 0xEFF80000 $filesize; " \
597 "protect on 0xeFF80000 +$filesize\0" \
598"spi__bootd=fatload mmc $mmcpart $loadaddr $ubootd; " \
599 "sf probe 0; sf erase 0x8000 +$filesize; " \
600 "sf write $loadaddr 0x8000 $filesize\0" \
601"spi__cramfs=fatload mmc $mmcpart $loadaddr image.cramfs; " \
602 "protect off 0xec0a0000 +$filesize; " \
603 "erase 0xeC0A0000 +$filesize; " \
604 "cp.b $loadaddr 0xeC0A0000 $filesize; " \
605 "protect on 0xec0a0000 +$filesize\0" \
606"spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; " \
607 "sf probe 1; sf erase 0 +$filesize; " \
608 "sf write $loadaddr 0 $filesize\0" \
609"spi__mbrd=fatload mmc $mmcpart $loadaddr $mbr; " \
610 "sf probe 0; sf erase 0 +$filesize; " \
611 "sf write $loadaddr 0 $filesize\0" \
612"tftpflash=tftpboot $loadaddr $uboot; " \
613 "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
614 "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
615 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
616 "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
617 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
618"uboot= " __stringify(CONFIG_UBOOTPATH) "\0" \
619"ubootaddr=0x01000000\0" \
620"ubootfile=u-boot.bin\0" \
621"ubootd=u-boot4dongle.bin\0" \
622"upgrade=run flashworking\0" \
623"usb_phy_type=ulpi\0 " \
624"workingaddr=0x02F00000\0" \
625"workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
626
627#else
628
629#if defined(CONFIG_UCP1020T1)
630
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]631#define CONFIG_EXTRA_ENV_SETTINGS \
632"bootcmd=run releasefpga; run norbootworking || run norbootrecovery\0" \
633"bootfile=uImage\0" \
634"consoledev=ttyS0\0" \
635"cramfsfile=image.cramfs\0" \
636"dtbaddr=0x00c00000\0" \
637"dtbfile=image.dtb\0" \
638"ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
639"eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" \
640"eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" \
641"fileaddr=0x01000000\0" \
642"filesize=0x00080000\0" \
643"flashmbr=sf probe 0; " \
644 "tftp $loadaddr $mbr; " \
645 "sf erase $mbr_offset +$filesize; " \
646 "sf write $loadaddr $mbr_offset $filesize\0" \
647"flashrecovery=tftp $recoveryaddr $cramfsfile; " \
648 "protect off $nor_recoveryaddr +$filesize; " \
649 "erase $nor_recoveryaddr +$filesize; " \
650 "cp.b $recoveryaddr $nor_recoveryaddr $filesize; " \
651 "protect on $nor_recoveryaddr +$filesize\0 " \
652"flashuboot=tftp $ubootaddr $ubootfile; " \
653 "protect off $nor_ubootaddr +$filesize; " \
654 "erase $nor_ubootaddr +$filesize; " \
655 "cp.b $ubootaddr $nor_ubootaddr $filesize; " \
656 "protect on $nor_ubootaddr +$filesize\0 " \
657"flashworking=tftp $workingaddr $cramfsfile; " \
658 "protect off $nor_workingaddr +$filesize; " \
659 "erase $nor_workingaddr +$filesize; " \
660 "cp.b $workingaddr $nor_workingaddr $filesize; " \
661 "protect on $nor_workingaddr +$filesize\0 " \
662"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 " \
663"kerneladdr=0x01100000\0" \
664"kernelfile=uImage\0" \
665"loadaddr=0x01000000\0" \
666"mbr=uCP1020.mbr\0" \
667"mbr_offset=0x00000000\0" \
668"netdev=eth0\0" \
669"nor_recoveryaddr=0xEC0A0000\0" \
670"nor_ubootaddr=0xEFF80000\0" \
671"nor_workingaddr=0xECFA0000\0" \
672"norbootrecovery=setenv bootargs $recoverybootargs" \
673 " console=$consoledev,$baudrate $othbootargs; " \
674 "run norloadrecovery; " \
675 "bootm $kerneladdr - $dtbaddr\0" \
676"norbootworking=setenv bootargs $workingbootargs" \
677 " console=$consoledev,$baudrate $othbootargs; " \
678 "run norloadworking; " \
679 "bootm $kerneladdr - $dtbaddr\0" \
680"norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; " \
681 "setenv cramfsaddr $nor_recoveryaddr; " \
682 "cramfsload $dtbaddr $dtbfile; " \
683 "cramfsload $kerneladdr $kernelfile\0" \
684"norloadworking=mw.l $kerneladdr 0x0 0x00a00000; " \
685 "setenv cramfsaddr $nor_workingaddr; " \
686 "cramfsload $dtbaddr $dtbfile; " \
687 "cramfsload $kerneladdr $kernelfile\0" \
688"othbootargs=quiet\0" \
689"ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro" \
690 " console=$consoledev,$baudrate $othbootargs; " \
691 "tftp $rootfsaddr $rootfsfile; " \
692 "tftp $loadaddr $kernelfile; " \
693 "tftp $dtbaddr $dtbfile; " \
694 "bootm $loadaddr $rootfsaddr $dtbaddr\0" \
695"ramdisk_size=120000\0" \
696"ramdiskfile=rootfs.ext2.gz.uboot\0" \
697"recoveryaddr=0x02F00000\0" \
698"recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0" \
699"releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \
700 "mw.l 0xffe0f008 0x00400000\0" \
701"rootfsaddr=0x02F00000\0" \
702"rootfsfile=rootfs.ext2.gz.uboot\0" \
703"rootpath=/opt/nfsroot\0" \
704"silent=1\0" \
705"tftpflash=tftpboot $loadaddr $uboot; " \
706 "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
707 "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
708 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
709 "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
710 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
711"uboot= " __stringify(CONFIG_UBOOTPATH) "\0" \
712"ubootaddr=0x01000000\0" \
713"ubootfile=u-boot.bin\0" \
714"upgrade=run flashworking\0" \
715"workingaddr=0x02F00000\0" \
716"workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
717
718#else /* For Arcturus Modules */
719
Oleksandr G Zhadan19ac6882015-04-29 16:57:39 -0400[diff] [blame]720#define CONFIG_EXTRA_ENV_SETTINGS \
721"bootcmd=run norkernel\0" \
722"bootfile=uImage\0" \
723"consoledev=ttyS0\0" \
724"dtbaddr=0x00c00000\0" \
725"dtbfile=image.dtb\0" \
726"ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
727"eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" \
728"eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" \
729"fileaddr=0x01000000\0" \
730"filesize=0x00080000\0" \
731"flashmbr=sf probe 0; " \
732 "tftp $loadaddr $mbr; " \
733 "sf erase $mbr_offset +$filesize; " \
734 "sf write $loadaddr $mbr_offset $filesize\0" \
735"flashuboot=tftp $loadaddr $ubootfile; " \
736 "protect off $nor_ubootaddr0 +$filesize; " \
737 "erase $nor_ubootaddr0 +$filesize; " \
738 "cp.b $loadaddr $nor_ubootaddr0 $filesize; " \
739 "protect on $nor_ubootaddr0 +$filesize; " \
740 "protect off $nor_ubootaddr1 +$filesize; " \
741 "erase $nor_ubootaddr1 +$filesize; " \
742 "cp.b $loadaddr $nor_ubootaddr1 $filesize; " \
743 "protect on $nor_ubootaddr1 +$filesize\0 " \
744"format0=protect off $part0base +$part0size; " \
745 "erase $part0base +$part0size\0" \
746"format1=protect off $part1base +$part1size; " \
747 "erase $part1base +$part1size\0" \
748"format2=protect off $part2base +$part2size; " \
749 "erase $part2base +$part2size\0" \
750"format3=protect off $part3base +$part3size; " \
751 "erase $part3base +$part3size\0" \
752"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 " \
753"kerneladdr=0x01100000\0" \
754"kernelargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0" \
755"kernelfile=uImage\0" \
756"loadaddr=0x01000000\0" \
757"mbr=uCP1020.mbr\0" \
758"mbr_offset=0x00000000\0" \
759"netdev=eth0\0" \
760"nor_ubootaddr0=0xEC000000\0" \
761"nor_ubootaddr1=0xEFF80000\0" \
762"norkernel=setenv bootargs $kernelargs console=$consoledev,$baudrate; " \
763 "run norkernelload; " \
764 "bootm $kerneladdr - $dtbaddr\0" \
765"norkernelload=mw.l $kerneladdr 0x0 0x00a00000; " \
766 "setenv cramfsaddr $part0base; " \
767 "cramfsload $dtbaddr $dtbfile; " \
768 "cramfsload $kerneladdr $kernelfile\0" \
769"part0base=0xEC100000\0" \
770"part0size=0x00700000\0" \
771"part1base=0xEC800000\0" \
772"part1size=0x02000000\0" \
773"part2base=0xEE800000\0" \
774"part2size=0x00800000\0" \
775"part3base=0xEF000000\0" \
776"part3size=0x00F80000\0" \
777"partENVbase=0xEC080000\0" \
778"partENVsize=0x00080000\0" \
779"program0=tftp part0-000000.bin; " \
780 "protect off $part0base +$filesize; " \
781 "erase $part0base +$filesize; " \
782 "cp.b $loadaddr $part0base $filesize; " \
783 "echo Verifying...; " \
784 "cmp.b $loadaddr $part0base $filesize\0" \
785"program1=tftp part1-000000.bin; " \
786 "protect off $part1base +$filesize; " \
787 "erase $part1base +$filesize; " \
788 "cp.b $loadaddr $part1base $filesize; " \
789 "echo Verifying...; " \
790 "cmp.b $loadaddr $part1base $filesize\0" \
791"program2=tftp part2-000000.bin; " \
792 "protect off $part2base +$filesize; " \
793 "erase $part2base +$filesize; " \
794 "cp.b $loadaddr $part2base $filesize; " \
795 "echo Verifying...; " \
796 "cmp.b $loadaddr $part2base $filesize\0" \
797"ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro" \
798 " console=$consoledev,$baudrate $othbootargs; " \
799 "tftp $rootfsaddr $rootfsfile; " \
800 "tftp $loadaddr $kernelfile; " \
801 "tftp $dtbaddr $dtbfile; " \
802 "bootm $loadaddr $rootfsaddr $dtbaddr\0" \
803"ramdisk_size=120000\0" \
804"ramdiskfile=rootfs.ext2.gz.uboot\0" \
805"releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \
806 "mw.l 0xffe0f008 0x00400000\0" \
807"rootfsaddr=0x02F00000\0" \
808"rootfsfile=rootfs.ext2.gz.uboot\0" \
809"rootpath=/opt/nfsroot\0" \
810"spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; " \
811 "sf probe 0; sf erase 0 +$filesize; " \
812 "sf write $loadaddr 0 $filesize\0" \
813"spi__boot=fatload mmc $mmcpart $loadaddr u-boot.bin; " \
814 "protect off 0xeC000000 +$filesize; " \
815 "erase 0xEC000000 +$filesize; " \
816 "cp.b $loadaddr 0xEC000000 $filesize; " \
817 "cmp.b $loadaddr 0xEC000000 $filesize; " \
818 "protect on 0xeC000000 +$filesize\0" \
819"tftpflash=tftpboot $loadaddr $uboot; " \
820 "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
821 "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
822 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
823 "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
824 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
825"uboot= " __stringify(CONFIG_UBOOTPATH) "\0" \
826"ubootfile=u-boot.bin\0" \
827"upgrade=run flashuboot\0" \
828"usb_phy_type=ulpi\0 " \
829"boot_nfs= " \
830 "setenv bootargs root=/dev/nfs rw " \
831 "nfsroot=$serverip:$rootpath " \
832 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
833 "console=$consoledev,$baudrate $othbootargs;" \
834 "tftp $loadaddr $bootfile;" \
835 "tftp $fdtaddr $fdtfile;" \
836 "bootm $loadaddr - $fdtaddr\0" \
837"boot_hd = " \
838 "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \
839 "console=$consoledev,$baudrate $othbootargs;" \
840 "usb start;" \
841 "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \
842 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \
843 "bootm $loadaddr - $fdtaddr\0" \
844"boot_usb_fat = " \
845 "setenv bootargs root=/dev/ram rw " \
846 "console=$consoledev,$baudrate $othbootargs " \
847 "ramdisk_size=$ramdisk_size;" \
848 "usb start;" \
849 "fatload usb 0:2 $loadaddr $bootfile;" \
850 "fatload usb 0:2 $fdtaddr $fdtfile;" \
851 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \
852 "bootm $loadaddr $ramdiskaddr $fdtaddr\0 " \
853"boot_usb_ext2 = " \
854 "setenv bootargs root=/dev/ram rw " \
855 "console=$consoledev,$baudrate $othbootargs " \
856 "ramdisk_size=$ramdisk_size;" \
857 "usb start;" \
858 "ext2load usb 0:4 $loadaddr $bootfile;" \
859 "ext2load usb 0:4 $fdtaddr $fdtfile;" \
860 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
861 "bootm $loadaddr $ramdiskaddr $fdtaddr\0 " \
862"boot_nor = " \
863 "setenv bootargs root=/dev/$jffs2nor rw " \
864 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \
865 "bootm $norbootaddr - $norfdtaddr\0 " \
866"boot_ram = " \
867 "setenv bootargs root=/dev/ram rw " \
868 "console=$consoledev,$baudrate $othbootargs " \
869 "ramdisk_size=$ramdisk_size;" \
870 "tftp $ramdiskaddr $ramdiskfile;" \
871 "tftp $loadaddr $bootfile;" \
872 "tftp $fdtaddr $fdtfile;" \
873 "bootm $loadaddr $ramdiskaddr $fdtaddr\0"
874
875#endif
876#endif
877
878#endif /* __CONFIG_H */