blob: 98ed6f81d2b5521ff6e9f516a828d7e657248104 [file] [log] [blame]
Wolfgang Denk97caf672006-03-12 02:12:27 +01001/*
2 * U-boot - ezkit533.c
3 *
Aubrey Li314d22f2007-04-05 18:31:18 +08004 * Copyright (c) 2005-2007 Analog Devices Inc.
Wolfgang Denk97caf672006-03-12 02:12:27 +01005 *
6 * (C) Copyright 2000-2004
7 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
8 *
9 * See file CREDITS for list of people who contributed to this
10 * project.
11 *
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License as
14 * published by the Free Software Foundation; either version 2 of
15 * the License, or (at your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
Aubrey Li314d22f2007-04-05 18:31:18 +080024 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
25 * MA 02110-1301 USA
Wolfgang Denk97caf672006-03-12 02:12:27 +010026 */
27
28#include <common.h>
29#if defined(CONFIG_MISC_INIT_R)
30#include "psd4256.h"
31#endif
32
Wolfgang Denkd112a2c2007-09-15 20:48:41 +020033DECLARE_GLOBAL_DATA_PTR;
34
Wolfgang Denk97caf672006-03-12 02:12:27 +010035int checkboard(void)
36{
Aubrey.Li9da597f2007-03-09 13:38:44 +080037#if (BFIN_CPU == ADSP_BF531)
38 printf("CPU: ADSP BF531 Rev.: 0.%d\n", *pCHIPID >> 28);
39#elif (BFIN_CPU == ADSP_BF532)
40 printf("CPU: ADSP BF532 Rev.: 0.%d\n", *pCHIPID >> 28);
41#else
Wolfgang Denk97caf672006-03-12 02:12:27 +010042 printf("CPU: ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28);
Aubrey.Li9da597f2007-03-09 13:38:44 +080043#endif
Wolfgang Denk97caf672006-03-12 02:12:27 +010044 printf("Board: ADI BF533 EZ-Kit Lite board\n");
45 printf(" Support: http://blackfin.uclinux.org/\n");
Wolfgang Denk97caf672006-03-12 02:12:27 +010046 return 0;
47}
48
49long int initdram(int board_type)
50{
Wolfgang Denk97caf672006-03-12 02:12:27 +010051#ifdef DEBUG
52 int brate;
53 char *tmp = getenv("baudrate");
54 brate = simple_strtoul(tmp, NULL, 16);
Aubrey.Li9da597f2007-03-09 13:38:44 +080055 printf("Serial Port initialized with Baud rate = %x\n", brate);
Wolfgang Denk97caf672006-03-12 02:12:27 +010056 printf("SDRAM attributes:\n");
57 printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles"
58 "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n",
59 3, 3, 6, 2, 3);
60 printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
61 printf("Bank size = %d MB\n", CFG_MAX_RAM_SIZE >> 20);
62#endif
63 gd->bd->bi_memstart = CFG_SDRAM_BASE;
64 gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;
65 return CFG_MAX_RAM_SIZE;
66}
67
68#if defined(CONFIG_MISC_INIT_R)
69/* miscellaneous platform dependent initialisations */
70int misc_init_r(void)
71{
Aubrey.Li9da597f2007-03-09 13:38:44 +080072 /* Set direction bits for Video en/decoder reset as output */
73 *(volatile unsigned char *)(CFG_FLASH1_BASE + PSD_PORTA_DIR) =
74 PSDA_VDEC_RST | PSDA_VENC_RST;
75 /* Deactivate Video en/decoder reset lines */
76 *(volatile unsigned char *)(CFG_FLASH1_BASE + PSD_PORTA_DOUT) =
77 PSDA_VDEC_RST | PSDA_VENC_RST;
78
79 return 0;
Wolfgang Denk97caf672006-03-12 02:12:27 +010080}
81#endif