blob: cc2ee3364164386acb712872e9ef84772c0cf8ca [file] [log] [blame]
Icenowy Zhengd1fa87d2018-07-21 16:20:26 +08001#include <asm/io.h>
2#include <asm/arch/cpu.h>
3#include <asm/arch/clock.h>
Jernej Skrabec55a30a22021-01-11 21:11:38 +01004#include <asm/arch/prcm.h>
Icenowy Zhengd1fa87d2018-07-21 16:20:26 +08005
6#ifdef CONFIG_SPL_BUILD
7void clock_init_safe(void)
8{
9 struct sunxi_ccm_reg *const ccm =
10 (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
Jernej Skrabece04cd492022-01-30 15:27:13 +010011 struct sunxi_prcm_reg *const prcm =
12 (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
Jernej Skrabec70bdefa2021-02-01 18:25:57 +010013
Jernej Skrabec59221142022-01-30 15:27:14 +010014 if (IS_ENABLED(CONFIG_MACH_SUN50I_H616)) {
15 /* this seems to enable PLLs on H616 */
Jernej Skrabece04cd492022-01-30 15:27:13 +010016 setbits_le32(&prcm->sys_pwroff_gating, 0x10);
Jernej Skrabec59221142022-01-30 15:27:14 +010017 setbits_le32(&prcm->res_cal_ctrl, 2);
18 }
19
Andre Przywara068962b2022-10-05 17:54:19 +010020 if (IS_ENABLED(CONFIG_MACH_SUN50I_H616) ||
21 IS_ENABLED(CONFIG_MACH_SUN50I_H6)) {
22 clrbits_le32(&prcm->res_cal_ctrl, 1);
23 setbits_le32(&prcm->res_cal_ctrl, 1);
24 }
Jernej Skrabec70bdefa2021-02-01 18:25:57 +010025
Jernej Skrabec964a86f2022-01-30 15:27:15 +010026 if (IS_ENABLED(CONFIG_MACH_SUN50I_H6)) {
27 /* set key field for ldo enable */
28 setbits_le32(&prcm->pll_ldo_cfg, 0xA7000000);
29 /* set PLL VDD LDO output to 1.14 V */
30 setbits_le32(&prcm->pll_ldo_cfg, 0x60000);
31 }
32
Icenowy Zhengd1fa87d2018-07-21 16:20:26 +080033 clock_set_pll1(408000000);
34
35 writel(CCM_PLL6_DEFAULT, &ccm->pll6_cfg);
36 while (!(readl(&ccm->pll6_cfg) & CCM_PLL6_LOCK))
37 ;
38
39 clrsetbits_le32(&ccm->cpu_axi_cfg, CCM_CPU_AXI_APB_MASK | CCM_CPU_AXI_AXI_MASK,
40 CCM_CPU_AXI_DEFAULT_FACTORS);
41
42 writel(CCM_PSI_AHB1_AHB2_DEFAULT, &ccm->psi_ahb1_ahb2_cfg);
Andre Przywara1987b0c2022-09-06 15:59:57 +010043#ifdef CCM_AHB3_DEFAULT
Icenowy Zhengd1fa87d2018-07-21 16:20:26 +080044 writel(CCM_AHB3_DEFAULT, &ccm->ahb3_cfg);
Andre Przywara1987b0c2022-09-06 15:59:57 +010045#endif
Icenowy Zhengd1fa87d2018-07-21 16:20:26 +080046 writel(CCM_APB1_DEFAULT, &ccm->apb1_cfg);
47
48 /*
49 * The mux and factor are set, but the clock will be enabled in
50 * DRAM initialization code.
51 */
52 writel(MBUS_CLK_SRC_PLL6X2 | MBUS_CLK_M(3), &ccm->mbus_cfg);
53}
Icenowy Zhengd1fa87d2018-07-21 16:20:26 +080054
55void clock_init_uart(void)
56{
57 struct sunxi_ccm_reg *const ccm =
58 (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
59
60 /* uart clock source is apb2 */
61 writel(APB2_CLK_SRC_OSC24M|
62 APB2_CLK_RATE_N_1|
63 APB2_CLK_RATE_M(1),
64 &ccm->apb2_cfg);
65
66 /* open the clock for uart */
67 setbits_le32(&ccm->uart_gate_reset,
68 1 << (CONFIG_CONS_INDEX - 1));
69
70 /* deassert uart reset */
71 setbits_le32(&ccm->uart_gate_reset,
72 1 << (RESET_SHIFT + CONFIG_CONS_INDEX - 1));
73}
74
Icenowy Zhengd1fa87d2018-07-21 16:20:26 +080075void clock_set_pll1(unsigned int clk)
76{
77 struct sunxi_ccm_reg * const ccm =
78 (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
79 u32 val;
80
81 /* Do not support clocks < 288MHz as they need factor P */
82 if (clk < 288000000) clk = 288000000;
83
84 /* Switch to 24MHz clock while changing PLL1 */
85 val = readl(&ccm->cpu_axi_cfg);
86 val &= ~CCM_CPU_AXI_MUX_MASK;
87 val |= CCM_CPU_AXI_MUX_OSC24M;
88 writel(val, &ccm->cpu_axi_cfg);
89
90 /* clk = 24*n/p, p is ignored if clock is >288MHz */
Andre Przywara1b946cd2022-12-02 20:30:40 +000091 val = CCM_PLL1_CTRL_EN | CCM_PLL1_LOCK_EN | CCM_PLL1_CLOCK_TIME_2;
92 val |= CCM_PLL1_CTRL_N(clk / 24000000);
93 if (IS_ENABLED(CONFIG_MACH_SUN50I_H616))
94 val |= CCM_PLL1_OUT_EN;
95 if (IS_ENABLED(CONFIG_SUNXI_GEN_NCAT2))
96 val |= CCM_PLL1_OUT_EN | CCM_PLL1_LDO_EN;
97 writel(val, &ccm->pll1_cfg);
Icenowy Zhengd1fa87d2018-07-21 16:20:26 +080098 while (!(readl(&ccm->pll1_cfg) & CCM_PLL1_LOCK)) {}
99
100 /* Switch CPU to PLL1 */
101 val = readl(&ccm->cpu_axi_cfg);
102 val &= ~CCM_CPU_AXI_MUX_MASK;
103 val |= CCM_CPU_AXI_MUX_PLL_CPUX;
104 writel(val, &ccm->cpu_axi_cfg);
105}
Jernej Skrabec55a30a22021-01-11 21:11:38 +0100106
107int clock_twi_onoff(int port, int state)
108{
109 struct sunxi_ccm_reg *const ccm =
110 (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
111 struct sunxi_prcm_reg *const prcm =
112 (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
113 u32 value, *ptr;
114 int shift;
115
116 value = BIT(GATE_SHIFT) | BIT (RESET_SHIFT);
117
118 if (port == 5) {
119 shift = 0;
120 ptr = &prcm->twi_gate_reset;
121 } else {
122 shift = port;
123 ptr = &ccm->twi_gate_reset;
124 }
125
126 /* set the apb clock gate and reset for twi */
127 if (state)
128 setbits_le32(ptr, value << shift);
129 else
130 clrbits_le32(ptr, value << shift);
131
132 return 0;
133}
Andre Przywara93d67782023-12-07 16:07:05 +0000134#endif /* CONFIG_SPL_BUILD */
135
136/* PLL_PERIPH0 clock, used by the MMC driver */
137unsigned int clock_get_pll6(void)
138{
139 struct sunxi_ccm_reg *const ccm =
140 (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
141 uint32_t rval = readl(&ccm->pll6_cfg);
142 int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT) + 1;
143 int div2 = ((rval & CCM_PLL6_CTRL_DIV2_MASK) >>
144 CCM_PLL6_CTRL_DIV2_SHIFT) + 1;
145 int div1, m;
146
147 if (IS_ENABLED(CONFIG_SUNXI_GEN_NCAT2)) {
148 div1 = ((rval & CCM_PLL6_CTRL_P0_MASK) >>
149 CCM_PLL6_CTRL_P0_SHIFT) + 1;
150 m = 1;
151 } else {
152 div1 = ((rval & CCM_PLL6_CTRL_DIV1_MASK) >>
153 CCM_PLL6_CTRL_DIV1_SHIFT) + 1;
154 if (IS_ENABLED(CONFIG_MACH_SUN50I_H6))
155 m = 4;
156 else
157 m = 2;
158 }
159
160 return 24000000U * n / m / div1 / div2;
161}