blob: af60a9924e2fb44067a0192c4bc0591fb105ecac [file] [log] [blame]
Vignesh Raghavendraa5552862020-07-07 13:43:33 +05301/* SPDX-License-Identifier: GPL-2.0 */
2/*
Nishanth Menoneaa39c62023-11-01 15:56:03 -05003 * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com
Vignesh Raghavendraa5552862020-07-07 13:43:33 +05304 */
5
6#ifndef K3_PSIL_H_
7#define K3_PSIL_H_
8
9#include <linux/types.h>
10
11#define K3_PSIL_DST_THREAD_ID_OFFSET 0x8000
12
13struct device;
14
15/**
16 * enum udma_tp_level - Channel Throughput Levels
17 * @UDMA_TP_NORMAL: Normal channel
18 * @UDMA_TP_HIGH: High Throughput channel
19 * @UDMA_TP_ULTRAHIGH: Ultra High Throughput channel
20 */
21enum udma_tp_level {
22 UDMA_TP_NORMAL = 0,
23 UDMA_TP_HIGH,
24 UDMA_TP_ULTRAHIGH,
25 UDMA_TP_LAST,
26};
27
28/**
29 * enum psil_endpoint_type - PSI-L Endpoint type
30 * @PSIL_EP_NATIVE: Normal channel
31 * @PSIL_EP_PDMA_XY: XY mode PDMA
32 * @PSIL_EP_PDMA_MCAN: MCAN mode PDMA
33 * @PSIL_EP_PDMA_AASRC: AASRC mode PDMA
34 */
35enum psil_endpoint_type {
36 PSIL_EP_NATIVE = 0,
37 PSIL_EP_PDMA_XY,
38 PSIL_EP_PDMA_MCAN,
39 PSIL_EP_PDMA_AASRC,
40};
41
42/**
43 * struct psil_endpoint_config - PSI-L Endpoint configuration
44 * @ep_type: PSI-L endpoint type
45 * @pkt_mode: If set, the channel must be in Packet mode, otherwise in
46 * TR mode
47 * @notdpkt: TDCM must be suppressed on the TX channel
48 * @needs_epib: Endpoint needs EPIB
49 * @psd_size: If set, PSdata is used by the endpoint
50 * @channel_tpl: Desired throughput level for the channel
51 * @pdma_acc32: ACC32 must be enabled on the PDMA side
52 * @pdma_burst: BURST must be enabled on the PDMA side
Vignesh Raghavendra2eaf6ba2021-05-10 20:06:06 +053053 * @mapped_channel_id: PKTDMA thread to channel mapping for mapped
54 * channels. The thread must be serviced by the specified
55 * channel if mapped_channel_id is >= 0 in case of PKTDMA
56 * @flow_start: PKTDMA flow range start of mapped channel. Unmapped
57 * channels use flow_id == chan_id
58 * @flow_num: PKTDMA flow count of mapped channel. Unmapped
59 * channels use flow_id == chan_id
60 * @default_flow_id: PKTDMA default (r)flow index of mapped channel.
61 * Must be within the flow range of the mapped channel.
Vignesh Raghavendraa5552862020-07-07 13:43:33 +053062 */
63struct psil_endpoint_config {
64 enum psil_endpoint_type ep_type;
65
66 unsigned pkt_mode:1;
67 unsigned notdpkt:1;
68 unsigned needs_epib:1;
69 u32 psd_size;
70 enum udma_tp_level channel_tpl;
71
72 /* PDMA properties, valid for PSIL_EP_PDMA_* */
73 unsigned pdma_acc32:1;
74 unsigned pdma_burst:1;
Vignesh Raghavendra2eaf6ba2021-05-10 20:06:06 +053075
76 /* PKTDMA mapped channel */
77 int mapped_channel_id;
78 /* PKTDMA tflow and rflow ranges for mapped channel */
79 u16 flow_start;
80 u16 flow_num;
81 u16 default_flow_id;
Vignesh Raghavendraa5552862020-07-07 13:43:33 +053082};
83#endif /* K3_PSIL_H_ */