| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: BSD-3-Clause |
| 2 | /* |
| 3 | * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> |
| 4 | */ |
| 5 | |
| 6 | /dts-v1/; |
| 7 | |
| 8 | #include "sdm845-sony-xperia-tama.dtsi" |
| 9 | |
| 10 | /* XZ3 uses an Atmel touchscreen instead. */ |
| 11 | /delete-node/ &touchscreen; |
| 12 | |
| 13 | / { |
| 14 | model = "Sony Xperia XZ3"; |
| 15 | compatible = "sony,akatsuki-row", "qcom,sdm845"; |
| 16 | |
| 17 | /* Fixed DCDC for the OLED panel */ |
| 18 | ts_vddio_supply: ts-vddio-regulator { |
| 19 | compatible = "regulator-fixed"; |
| 20 | regulator-name = "ts_vddio"; |
| 21 | |
| 22 | regulator-min-microvolt = <1840000>; |
| 23 | regulator-max-microvolt = <1840000>; |
| 24 | |
| 25 | gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>; |
| 26 | enable-active-high; |
| 27 | regulator-boot-on; |
| 28 | }; |
| 29 | }; |
| 30 | |
| 31 | &ibb { |
| 32 | status = "disabled"; |
| 33 | }; |
| 34 | |
| 35 | &lab { |
| 36 | status = "disabled"; |
| 37 | }; |
| 38 | |
| 39 | &panel { |
| 40 | /* Akatsuki uses an OLED panel. */ |
| 41 | /delete-property/ backlight; |
| 42 | /delete-property/ vsp-supply; |
| 43 | /delete-property/ vsn-supply; |
| 44 | /delete-property/ touch-reset-gpios; |
| 45 | }; |
| 46 | |
| 47 | &pmi8998_gpios { |
| 48 | gpio-line-names = "NC", /* GPIO_1 */ |
| 49 | "NC", |
| 50 | "NC", |
| 51 | "", |
| 52 | "NC", |
| 53 | "NC", |
| 54 | "", |
| 55 | "WLC_EN_N", |
| 56 | "NC", |
| 57 | "NC", /* GPIO_10 */ |
| 58 | "NC", |
| 59 | "CAM_IO_EN", |
| 60 | "", |
| 61 | "NC"; |
| 62 | }; |
| 63 | |
| 64 | &pmi8998_wled { |
| 65 | status = "disabled"; |
| 66 | }; |
| 67 | |
| 68 | &tlmm { |
| 69 | gpio-line-names = "NC", /* GPIO_0 */ |
| 70 | "NC", |
| 71 | "NC", |
| 72 | "NC", |
| 73 | "DEBUG_UART_TX", |
| 74 | "DEBUG_UART_RX", |
| 75 | "DISP_RESET_N", |
| 76 | "SAMD_RSTEN_N", |
| 77 | "CHAT_CAM_PWR_EN", |
| 78 | "CAM2_RSTN", |
| 79 | "MDP_VSYNC_P", /* GPIO_10 */ |
| 80 | "RGBC_IR_INT", |
| 81 | "NFC_VEN", |
| 82 | "CAM_MCLK0", |
| 83 | "CAM_MCLK1", |
| 84 | "NC", |
| 85 | "MASTER_RST_N", |
| 86 | "CCI_I2C_SDA0", |
| 87 | "CCI_I2C_SCL0", |
| 88 | "CCI_I2C_SDA1", |
| 89 | "CCI_I2C_SCL1", /* GPIO_20 */ |
| 90 | "CAM_SOF", |
| 91 | "TOF_INT", |
| 92 | "TOF_RESET_N", |
| 93 | "NC", |
| 94 | "NC", |
| 95 | "NC", |
| 96 | "MAIN_CAM_PWR_EN", |
| 97 | "DVDT_ENABLE", |
| 98 | "DVDT_WRT_DET_AND", |
| 99 | "DVDT_WRT_DET_OR", /* GPIO_30 */ |
| 100 | "WLC_INT_N", |
| 101 | "NC", |
| 102 | "CAMSENSOR_I2C_SDA", |
| 103 | "CAMSENSOR_I2C_SCL", |
| 104 | "NC", |
| 105 | "NC", |
| 106 | "NC", |
| 107 | "CC_DIR", |
| 108 | "NC", |
| 109 | "FP_RESET_N", /* GPIO_40 */ |
| 110 | "NC", |
| 111 | "NC", |
| 112 | "NC", |
| 113 | "DISP_ERR_FG", |
| 114 | "BT_HCI_UART_CTS_N", |
| 115 | "BT_HCI_UART_RFR_N", |
| 116 | "BT_HCI_UART_TXD", |
| 117 | "BT_HCI_UART_TRXD", |
| 118 | "USB_AUDIO_EN1", |
| 119 | "SW_SERVICE", /* GPIO_50 */ |
| 120 | "US_EURO_SEL", |
| 121 | "SAMD_BOOTL_PIN", |
| 122 | "CODEC_INT2_N", |
| 123 | "CODEC_INT1_N", |
| 124 | "APPS_I2C_SDA", |
| 125 | "APPS_I2C_SCL", |
| 126 | "FORCED_USB_BOOT", |
| 127 | "SDM_SWD_CLK", |
| 128 | "SDM_SWD_DAT", |
| 129 | "SAMD_RST", /* GPIO_60 */ |
| 130 | "USB_PD_EN", |
| 131 | "NFC_DWLD_EN", |
| 132 | "NFC_IRQ", |
| 133 | "CODEC_RST_N", |
| 134 | "CODEC_SPI_MISO", |
| 135 | "CODEC_SPI_MOSI", |
| 136 | "CODEC_SPI_CLK", |
| 137 | "CODEC_SPI_CS_N", |
| 138 | "NC", |
| 139 | "CODEC_SLIMBUS_CLK", /* GPIO_70 */ |
| 140 | "CODEC_SLIMBUS_DATA0", |
| 141 | "CODEC_SLIMBUS_DATA1", |
| 142 | "BT_FM_SLIMBUS_DATA", |
| 143 | "BT_FM_SLIMBUS_CLK", |
| 144 | "HW_ID_0", |
| 145 | "HW_ID_1", |
| 146 | "TX_GTR_THRES_IN", |
| 147 | "MODE_SEL2", |
| 148 | "NC", |
| 149 | "CAM1_RSTN", /* GPIO_80 */ |
| 150 | "", |
| 151 | "", |
| 152 | "", |
| 153 | "", |
| 154 | "TS_I2C_SDA", |
| 155 | "TS_I2C_SCL", |
| 156 | "NC", |
| 157 | "NC", |
| 158 | "NC", |
| 159 | "NC", /* GPIO_90 */ |
| 160 | "NC", |
| 161 | "NC", |
| 162 | "NC", |
| 163 | "NC", |
| 164 | "NC", |
| 165 | "NC", |
| 166 | "RFFE6_CLK", |
| 167 | "RFFE6_DATA", |
| 168 | "TS_RESET_N", |
| 169 | "", /* GPIO_100 */ |
| 170 | "GRFC4", |
| 171 | "DEBUG_GPIO0", |
| 172 | "DEBUG_GPIO1", |
| 173 | "RF_LCD_ID_EN", |
| 174 | "UIM2_DATA", |
| 175 | "UIM2_CLK", |
| 176 | "UIM2_RESET", |
| 177 | "UIM2_PRESENT", |
| 178 | "UIM1_DATA", |
| 179 | "UIM1_CLK", /* GPIO_110 */ |
| 180 | "UIM1_RESET", |
| 181 | "UIM1_PRESENT", |
| 182 | "NC", |
| 183 | "NC", |
| 184 | "NC", |
| 185 | "NFC_ESE_PWR_REQ", |
| 186 | "ACCEL_INT", |
| 187 | "GYRO_INT", |
| 188 | "COMPASS_INT", |
| 189 | "ALS_PROX_INT_N", /* GPIO_120 */ |
| 190 | "FP_INT", |
| 191 | "RF_ID_EXTENTION", |
| 192 | "BAROMETER_INT", |
| 193 | "ACC_COVER_OPEN", |
| 194 | "TS_INT_N", |
| 195 | "TRAY_DET", |
| 196 | "GRFC3", |
| 197 | "NC", |
| 198 | "UIM2_DETECT_EN", |
| 199 | "QLINK_REQUEST", /* GPIO_130 */ |
| 200 | "QLINK_ENABLE", |
| 201 | "GRFC2", |
| 202 | "TS_VDDIO_EN", |
| 203 | "WMSS_RESET_N", |
| 204 | "PA_INDICATOR_OR", |
| 205 | "GRFC1", |
| 206 | "RFFE3_DATA", |
| 207 | "RFFE3_CLK", |
| 208 | "RFFE4_DATA", |
| 209 | "RFFE4_CLK", /* GPIO_140 */ |
| 210 | "RFFE5_DATA", |
| 211 | "RFFE5_CLK", |
| 212 | "GNSS_EN", |
| 213 | "MSS_LTE_COXM_TXD", |
| 214 | "MSS_LTE_COXM_RXD", |
| 215 | "RFFE2_DATA", |
| 216 | "RFFE2_CLK", |
| 217 | "RFFE1_DATA", |
| 218 | "RFFE1_CLK"; |
| 219 | |
| 220 | ts_vddio_en: ts-vddio-en-state { |
| 221 | pins = "gpio133"; |
| 222 | function = "gpio"; |
| 223 | drive-strength = <2>; |
| 224 | bias-disable; |
| 225 | output-high; |
| 226 | }; |
| 227 | }; |
| 228 | |
| 229 | &vreg_l14a_1p8 { |
| 230 | regulator-min-microvolt = <1840000>; |
| 231 | regulator-max-microvolt = <1840000>; |
| 232 | }; |
| 233 | |
| 234 | &vreg_l22a_2p8 { |
| 235 | /* Note: Round-down from 2700000 to be a multiple of PLDO step-size 8000 */ |
| 236 | regulator-min-microvolt = <2696000>; |
| 237 | regulator-max-microvolt = <2696000>; |
| 238 | }; |
| 239 | |
| 240 | &vreg_l28a_2p8 { |
| 241 | regulator-min-microvolt = <3000000>; |
| 242 | regulator-max-microvolt = <3000000>; |
| 243 | }; |