Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm64/qcom/sdm845-sony-xperia-tama-akatsuki.dts b/src/arm64/qcom/sdm845-sony-xperia-tama-akatsuki.dts
new file mode 100644
index 0000000..82e59e4
--- /dev/null
+++ b/src/arm64/qcom/sdm845-sony-xperia-tama-akatsuki.dts
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sdm845-sony-xperia-tama.dtsi"
+
+/* XZ3 uses an Atmel touchscreen instead. */
+/delete-node/ &touchscreen;
+
+/ {
+ model = "Sony Xperia XZ3";
+ compatible = "sony,akatsuki-row", "qcom,sdm845";
+
+ /* Fixed DCDC for the OLED panel */
+ ts_vddio_supply: ts-vddio-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "ts_vddio";
+
+ regulator-min-microvolt = <1840000>;
+ regulator-max-microvolt = <1840000>;
+
+ gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+};
+
+&ibb {
+ status = "disabled";
+};
+
+&lab {
+ status = "disabled";
+};
+
+&panel {
+ /* Akatsuki uses an OLED panel. */
+ /delete-property/ backlight;
+ /delete-property/ vsp-supply;
+ /delete-property/ vsn-supply;
+ /delete-property/ touch-reset-gpios;
+};
+
+&pmi8998_gpios {
+ gpio-line-names = "NC", /* GPIO_1 */
+ "NC",
+ "NC",
+ "",
+ "NC",
+ "NC",
+ "",
+ "WLC_EN_N",
+ "NC",
+ "NC", /* GPIO_10 */
+ "NC",
+ "CAM_IO_EN",
+ "",
+ "NC";
+};
+
+&pmi8998_wled {
+ status = "disabled";
+};
+
+&tlmm {
+ gpio-line-names = "NC", /* GPIO_0 */
+ "NC",
+ "NC",
+ "NC",
+ "DEBUG_UART_TX",
+ "DEBUG_UART_RX",
+ "DISP_RESET_N",
+ "SAMD_RSTEN_N",
+ "CHAT_CAM_PWR_EN",
+ "CAM2_RSTN",
+ "MDP_VSYNC_P", /* GPIO_10 */
+ "RGBC_IR_INT",
+ "NFC_VEN",
+ "CAM_MCLK0",
+ "CAM_MCLK1",
+ "NC",
+ "MASTER_RST_N",
+ "CCI_I2C_SDA0",
+ "CCI_I2C_SCL0",
+ "CCI_I2C_SDA1",
+ "CCI_I2C_SCL1", /* GPIO_20 */
+ "CAM_SOF",
+ "TOF_INT",
+ "TOF_RESET_N",
+ "NC",
+ "NC",
+ "NC",
+ "MAIN_CAM_PWR_EN",
+ "DVDT_ENABLE",
+ "DVDT_WRT_DET_AND",
+ "DVDT_WRT_DET_OR", /* GPIO_30 */
+ "WLC_INT_N",
+ "NC",
+ "CAMSENSOR_I2C_SDA",
+ "CAMSENSOR_I2C_SCL",
+ "NC",
+ "NC",
+ "NC",
+ "CC_DIR",
+ "NC",
+ "FP_RESET_N", /* GPIO_40 */
+ "NC",
+ "NC",
+ "NC",
+ "DISP_ERR_FG",
+ "BT_HCI_UART_CTS_N",
+ "BT_HCI_UART_RFR_N",
+ "BT_HCI_UART_TXD",
+ "BT_HCI_UART_TRXD",
+ "USB_AUDIO_EN1",
+ "SW_SERVICE", /* GPIO_50 */
+ "US_EURO_SEL",
+ "SAMD_BOOTL_PIN",
+ "CODEC_INT2_N",
+ "CODEC_INT1_N",
+ "APPS_I2C_SDA",
+ "APPS_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "SDM_SWD_CLK",
+ "SDM_SWD_DAT",
+ "SAMD_RST", /* GPIO_60 */
+ "USB_PD_EN",
+ "NFC_DWLD_EN",
+ "NFC_IRQ",
+ "CODEC_RST_N",
+ "CODEC_SPI_MISO",
+ "CODEC_SPI_MOSI",
+ "CODEC_SPI_CLK",
+ "CODEC_SPI_CS_N",
+ "NC",
+ "CODEC_SLIMBUS_CLK", /* GPIO_70 */
+ "CODEC_SLIMBUS_DATA0",
+ "CODEC_SLIMBUS_DATA1",
+ "BT_FM_SLIMBUS_DATA",
+ "BT_FM_SLIMBUS_CLK",
+ "HW_ID_0",
+ "HW_ID_1",
+ "TX_GTR_THRES_IN",
+ "MODE_SEL2",
+ "NC",
+ "CAM1_RSTN", /* GPIO_80 */
+ "",
+ "",
+ "",
+ "",
+ "TS_I2C_SDA",
+ "TS_I2C_SCL",
+ "NC",
+ "NC",
+ "NC",
+ "NC", /* GPIO_90 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "RFFE6_CLK",
+ "RFFE6_DATA",
+ "TS_RESET_N",
+ "", /* GPIO_100 */
+ "GRFC4",
+ "DEBUG_GPIO0",
+ "DEBUG_GPIO1",
+ "RF_LCD_ID_EN",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RESET",
+ "UIM2_PRESENT",
+ "UIM1_DATA",
+ "UIM1_CLK", /* GPIO_110 */
+ "UIM1_RESET",
+ "UIM1_PRESENT",
+ "NC",
+ "NC",
+ "NC",
+ "NFC_ESE_PWR_REQ",
+ "ACCEL_INT",
+ "GYRO_INT",
+ "COMPASS_INT",
+ "ALS_PROX_INT_N", /* GPIO_120 */
+ "FP_INT",
+ "RF_ID_EXTENTION",
+ "BAROMETER_INT",
+ "ACC_COVER_OPEN",
+ "TS_INT_N",
+ "TRAY_DET",
+ "GRFC3",
+ "NC",
+ "UIM2_DETECT_EN",
+ "QLINK_REQUEST", /* GPIO_130 */
+ "QLINK_ENABLE",
+ "GRFC2",
+ "TS_VDDIO_EN",
+ "WMSS_RESET_N",
+ "PA_INDICATOR_OR",
+ "GRFC1",
+ "RFFE3_DATA",
+ "RFFE3_CLK",
+ "RFFE4_DATA",
+ "RFFE4_CLK", /* GPIO_140 */
+ "RFFE5_DATA",
+ "RFFE5_CLK",
+ "GNSS_EN",
+ "MSS_LTE_COXM_TXD",
+ "MSS_LTE_COXM_RXD",
+ "RFFE2_DATA",
+ "RFFE2_CLK",
+ "RFFE1_DATA",
+ "RFFE1_CLK";
+
+ ts_vddio_en: ts-vddio-en-state {
+ pins = "gpio133";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+};
+
+&vreg_l14a_1p8 {
+ regulator-min-microvolt = <1840000>;
+ regulator-max-microvolt = <1840000>;
+};
+
+&vreg_l22a_2p8 {
+ /* Note: Round-down from 2700000 to be a multiple of PLDO step-size 8000 */
+ regulator-min-microvolt = <2696000>;
+ regulator-max-microvolt = <2696000>;
+};
+
+&vreg_l28a_2p8 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+};