blob: 9a33e7e77ca8bcca80acd0f4c00df9ec66610d15 [file] [log] [blame]
Christophe Leroy1fc46f52022-10-14 12:54:50 +02001// SPDX-License-Identifier: GPL-2.0+
2/*
3 * CMPC885 Device Tree Source
4 *
5 * Copyright 2020 CS Group
6 *
7 */
8
9/dts-v1/;
10
11/ {
12 model = "CMPC885";
13 compatible = "fsl, cmpc885", "fsl,mod885";
14 #address-cells = <1>;
15 #size-cells = <1>;
16
17 chosen {
18 stdout-path = &SERIAL;
19 };
20
Christophe Leroy1fc46f52022-10-14 12:54:50 +020021 SERIAL: serial {
22 compatible = "fsl,pq1-smc";
23 };
24
25 FEC1: fec@0 {
26 compatible = "fsl,pq1-fec1";
27 };
28
29 FEC2: fec@1 {
30 compatible = "fsl,pq1-fec2";
31 };
32
33 soc: immr@ff000000 {
34 #address-cells = <1>;
35 #size-cells = <1>;
36 device-type = "soc";
37 compatible = "simple-bus";
38 ranges = <0 0xff000000 0x4000>;
39 reg = <0xff000000 0x00000200>;
40
Christophe Leroy0fe1a202023-04-03 10:27:39 +020041 WDT: watchdog@0 {
42 compatible = "fsl,pq1-wdt";
43 reg = <0x0 0x10>;
44 timeout-sec = <2>;
45 hw_margin_ms = <1000>;
46 };
47
Christophe Leroy1fc46f52022-10-14 12:54:50 +020048 CPM1_PIO_B: gpio-controller@ab8 {
49 #gpio-cells = <2>;
50 compatible = "fsl,cpm1-pario-bank-b";
51 reg = <0xab8 0x10>;
52 gpio-controller;
53 };
54
55 CPM1_PIO_D: gpio-controller@970 {
56 #gpio-cells = <2>;
57 compatible = "fsl,cpm1-pario-bank-d";
58 reg = <0x970 0x10>;
59 gpio-controller;
60 };
61
62 CPM1_PIO_A: gpio-controller@950 {
63 #gpio-cells = <2>;
64 compatible = "fsl,cpm1-pario-bank-a";
65 reg = <0x950 0x10>;
66 gpio-controller;
67 };
68
69 CPM1_PIO_C: gpio-controller@960 {
70 #gpio-cells = <2>;
71 compatible = "fsl,cpm1-pario-bank-c";
72 reg = <0x960 0x10>;
73 gpio-controller;
74 };
75
76 CPM1_PIO_E: gpio-controller@ac8 {
77 #gpio-cells = <2>;
78 compatible = "fsl,cpm1-pario-bank-e";
79 reg = <0xac8 0x18>;
80 gpio-controller;
81 };
82
83 spi: spi@aa0 {
84 status = "okay";
85 #address-cells = <1>;
Christophe Leroy9a9e9372024-04-12 12:10:14 +020086 #size-cells = <0>;
Christophe Leroy1fc46f52022-10-14 12:54:50 +020087 compatible = "fsl,mpc8xx-spi";
88 gpios = <&CPM1_PIO_B 21 1>; /* /EEPROM_CS ACTIVE_LOW */
89
90 eeprom@0 {
Christophe Leroy9a9e9372024-04-12 12:10:14 +020091 reg = <0>;
92 compatible = "atmel,at25", "cs,eeprom";
Christophe Leroy1fc46f52022-10-14 12:54:50 +020093 };
94 };
95 };
96};