Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 93743d241c64bc1f7ecbf3262d1683176551e11f / . / src / arm64 / amlogic / meson-g12a-sei510.dts
blob: 4c4550dd47112796ffe04ef6c41f928c4d797f49 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2019 BayLibre SAS. All rights reserved.
4 */
5
6/dts-v1/;
7
8#include "meson-g12a.dtsi"
9#include <dt-bindings/gpio/gpio.h>
10#include <dt-bindings/input/input.h>
11#include <dt-bindings/gpio/meson-g12a-gpio.h>
12#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
13
14/ {
15 compatible = "seirobotics,sei510", "amlogic,g12a";
16 model = "SEI Robotics SEI510";
17
18 adc_keys {
19 compatible = "adc-keys";
20 io-channels = <&saradc 0>;
21 io-channel-names = "buttons";
22 keyup-threshold-microvolt = <1800000>;
23
24 button-onoff {
25 label = "On/Off";
26 linux,code = <KEY_POWER>;
27 press-threshold-microvolt = <1700000>;
28 };
29 };
30
31 aliases {
32 serial0 = &uart_AO;
33 ethernet0 = &ethmac;
34 };
35
36 mono_dac: audio-codec-0 {
37 compatible = "maxim,max98357a";
38 #sound-dai-cells = <0>;
39 sound-name-prefix = "U16";
40 sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>;
41 };
42
43 dmics: audio-codec-1 {
44 #sound-dai-cells = <0>;
45 compatible = "dmic-codec";
46 num-channels = <2>;
47 wakeup-delay-ms = <50>;
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]48 sound-name-prefix = "MIC";
49 };
50
51 chosen {
52 stdout-path = "serial0:115200n8";
53 };
54
55 cvbs-connector {
56 compatible = "composite-video-connector";
57
58 port {
59 cvbs_connector_in: endpoint {
60 remote-endpoint = <&cvbs_vdac_out>;
61 };
62 };
63 };
64
65 emmc_pwrseq: emmc-pwrseq {
66 compatible = "mmc-pwrseq-emmc";
67 reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
68 };
69
70 hdmi-connector {
71 compatible = "hdmi-connector";
72 type = "a";
73
74 port {
75 hdmi_connector_in: endpoint {
76 remote-endpoint = <&hdmi_tx_tmds_out>;
77 };
78 };
79 };
80
81 memory@0 {
82 device_type = "memory";
83 reg = <0x0 0x0 0x0 0x40000000>;
84 };
85
86 ao_5v: regulator-ao_5v {
87 compatible = "regulator-fixed";
88 regulator-name = "AO_5V";
89 regulator-min-microvolt = <5000000>;
90 regulator-max-microvolt = <5000000>;
91 vin-supply = <&dc_in>;
92 regulator-always-on;
93 };
94
95 dc_in: regulator-dc_in {
96 compatible = "regulator-fixed";
97 regulator-name = "DC_IN";
98 regulator-min-microvolt = <5000000>;
99 regulator-max-microvolt = <5000000>;
100 regulator-always-on;
101 };
102
103 emmc_1v8: regulator-emmc_1v8 {
104 compatible = "regulator-fixed";
105 regulator-name = "EMMC_1V8";
106 regulator-min-microvolt = <1800000>;
107 regulator-max-microvolt = <1800000>;
108 vin-supply = <&vddao_3v3>;
109 regulator-always-on;
110 };
111
112 vddao_3v3: regulator-vddao_3v3 {
113 compatible = "regulator-fixed";
114 regulator-name = "VDDAO_3V3";
115 regulator-min-microvolt = <3300000>;
116 regulator-max-microvolt = <3300000>;
117 vin-supply = <&dc_in>;
118 regulator-always-on;
119 };
120
121 vddao_3v3_t: regultor-vddao_3v3_t {
122 compatible = "regulator-fixed";
123 regulator-name = "VDDAO_3V3_T";
124 regulator-min-microvolt = <3300000>;
125 regulator-max-microvolt = <3300000>;
126 vin-supply = <&vddao_3v3>;
127 gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
128 enable-active-high;
129 };
130
131 vddcpu: regulator-vddcpu {
132 /*
133 * SY8120B1ABC DC/DC Regulator.
134 */
135 compatible = "pwm-regulator";
136
137 regulator-name = "VDDCPU";
138 regulator-min-microvolt = <721000>;
139 regulator-max-microvolt = <1022000>;
140
141 pwm-supply = <&dc_in>;
142
143 pwms = <&pwm_AO_cd 1 1250 0>;
144 pwm-dutycycle-range = <100 0>;
145
146 regulator-boot-on;
147 regulator-always-on;
148 };
149
150 vddio_ao1v8: regulator-vddio_ao1v8 {
151 compatible = "regulator-fixed";
152 regulator-name = "VDDIO_AO1V8";
153 regulator-min-microvolt = <1800000>;
154 regulator-max-microvolt = <1800000>;
155 vin-supply = <&vddao_3v3>;
156 regulator-always-on;
157 };
158
159 sdio_pwrseq: sdio-pwrseq {
160 compatible = "mmc-pwrseq-simple";
161 reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
162 clocks = <&wifi32k>;
163 clock-names = "ext_clock";
164 };
165
166 wifi32k: wifi32k {
167 compatible = "pwm-clock";
168 #clock-cells = <0>;
169 clock-frequency = <32768>;
170 pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
171 };
172
173 sound {
174 compatible = "amlogic,axg-sound-card";
175 model = "SEI510";
176 audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
177 <&tdmin_a>, <&tdmin_b>;
178 audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
179 "TDMOUT_A IN 1", "FRDDR_B OUT 0",
180 "TDMOUT_A IN 2", "FRDDR_C OUT 0",
181 "TDM_A Playback", "TDMOUT_A OUT",
182 "TDMOUT_B IN 0", "FRDDR_A OUT 1",
183 "TDMOUT_B IN 1", "FRDDR_B OUT 1",
184 "TDMOUT_B IN 2", "FRDDR_C OUT 1",
185 "TDM_B Playback", "TDMOUT_B OUT",
186 "TODDR_A IN 4", "PDM Capture",
187 "TODDR_B IN 4", "PDM Capture",
188 "TODDR_C IN 4", "PDM Capture",
189 "TDMIN_A IN 0", "TDM_A Capture",
190 "TDMIN_A IN 3", "TDM_A Loopback",
191 "TDMIN_B IN 0", "TDM_A Capture",
192 "TDMIN_B IN 3", "TDM_A Loopback",
193 "TDMIN_A IN 1", "TDM_B Capture",
194 "TDMIN_A IN 4", "TDM_B Loopback",
195 "TDMIN_B IN 1", "TDM_B Capture",
196 "TDMIN_B IN 4", "TDM_B Loopback",
197 "TODDR_A IN 0", "TDMIN_A OUT",
198 "TODDR_B IN 0", "TDMIN_A OUT",
199 "TODDR_C IN 0", "TDMIN_A OUT",
200 "TODDR_A IN 1", "TDMIN_B OUT",
201 "TODDR_B IN 1", "TDMIN_B OUT",
202 "TODDR_C IN 1", "TDMIN_B OUT";
203
204 assigned-clocks = <&clkc CLKID_MPLL2>,
205 <&clkc CLKID_MPLL0>,
206 <&clkc CLKID_MPLL1>;
207 assigned-clock-parents = <0>, <0>, <0>;
208 assigned-clock-rates = <294912000>,
209 <270950400>,
210 <393216000>;
211
212 dai-link-0 {
213 sound-dai = <&frddr_a>;
214 };
215
216 dai-link-1 {
217 sound-dai = <&frddr_b>;
218 };
219
220 dai-link-2 {
221 sound-dai = <&frddr_c>;
222 };
223
224 dai-link-3 {
225 sound-dai = <&toddr_a>;
226 };
227
228 dai-link-4 {
229 sound-dai = <&toddr_b>;
230 };
231
232 dai-link-5 {
233 sound-dai = <&toddr_c>;
234 };
235
236 /* internal speaker interface */
237 dai-link-6 {
238 sound-dai = <&tdmif_a>;
239 dai-format = "i2s";
240 dai-tdm-slot-tx-mask-0 = <1 1>;
241 mclk-fs = <256>;
242
243 codec-0 {
244 sound-dai = <&mono_dac>;
245 };
246
247 codec-1 {
248 sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
249 };
250 };
251
252 /* 8ch hdmi interface */
253 dai-link-7 {
254 sound-dai = <&tdmif_b>;
255 dai-format = "i2s";
256 dai-tdm-slot-tx-mask-0 = <1 1>;
257 dai-tdm-slot-tx-mask-1 = <1 1>;
258 dai-tdm-slot-tx-mask-2 = <1 1>;
259 dai-tdm-slot-tx-mask-3 = <1 1>;
260 mclk-fs = <256>;
261
262 codec {
263 sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
264 };
265 };
266
267 /* internal digital mics */
268 dai-link-8 {
269 sound-dai = <&pdm>;
270
271 codec {
272 sound-dai = <&dmics>;
273 };
274 };
275
276 /* hdmi glue */
277 dai-link-9 {
278 sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
279
280 codec {
281 sound-dai = <&hdmi_tx>;
282 };
283 };
284 };
285};
286
287&arb {
288 status = "okay";
289};
290
291&cec_AO {
292 pinctrl-0 = <&cec_ao_a_h_pins>;
293 pinctrl-names = "default";
294 status = "disabled";
295 hdmi-phandle = <&hdmi_tx>;
296};
297
298&cecb_AO {
299 pinctrl-0 = <&cec_ao_b_h_pins>;
300 pinctrl-names = "default";
301 status = "okay";
302 hdmi-phandle = <&hdmi_tx>;
303};
304
305&clkc_audio {
306 status = "okay";
307};
308
309&cpu0 {
310 cpu-supply = <&vddcpu>;
311 operating-points-v2 = <&cpu_opp_table>;
312 clocks = <&clkc CLKID_CPU_CLK>;
313 clock-latency = <50000>;
314};
315
316&cpu1 {
317 cpu-supply = <&vddcpu>;
318 operating-points-v2 = <&cpu_opp_table>;
319 clocks = <&clkc CLKID_CPU_CLK>;
320 clock-latency = <50000>;
321};
322
323&cpu2 {
324 cpu-supply = <&vddcpu>;
325 operating-points-v2 = <&cpu_opp_table>;
326 clocks = <&clkc CLKID_CPU_CLK>;
327 clock-latency = <50000>;
328};
329
330&cpu3 {
331 cpu-supply = <&vddcpu>;
332 operating-points-v2 = <&cpu_opp_table>;
333 clocks = <&clkc CLKID_CPU_CLK>;
334 clock-latency = <50000>;
335};
336
337&cvbs_vdac_port {
338 cvbs_vdac_out: endpoint {
339 remote-endpoint = <&cvbs_connector_in>;
340 };
341};
342
343&ethmac {
344 status = "okay";
345 phy-handle = <&internal_ephy>;
346 phy-mode = "rmii";
347};
348
349&frddr_a {
350 status = "okay";
351};
352
353&frddr_b {
354 status = "okay";
355};
356
357&frddr_c {
358 status = "okay";
359};
360
361&hdmi_tx {
362 status = "okay";
363 pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
364 pinctrl-names = "default";
365};
366
367&hdmi_tx_tmds_port {
368 hdmi_tx_tmds_out: endpoint {
369 remote-endpoint = <&hdmi_connector_in>;
370 };
371};
372
373&i2c3 {
374 status = "okay";
375 pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
376 pinctrl-names = "default";
377};
378
379&ir {
380 status = "okay";
381 pinctrl-0 = <&remote_input_ao_pins>;
382 pinctrl-names = "default";
383};
384
385&pwm_AO_cd {
386 pinctrl-0 = <&pwm_ao_d_e_pins>;
387 pinctrl-names = "default";
388 clocks = <&xtal>;
389 clock-names = "clkin1";
390 status = "okay";
391};
392
393&pwm_ef {
394 status = "okay";
395 pinctrl-0 = <&pwm_e_pins>;
396 pinctrl-names = "default";
397 clocks = <&xtal>;
398 clock-names = "clkin0";
399};
400
401&pdm {
402 pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>,
403 <&pdm_din2_z_pins>, <&pdm_din3_z_pins>,
404 <&pdm_dclk_z_pins>;
405 pinctrl-names = "default";
406 status = "okay";
407};
408
409&saradc {
410 status = "okay";
411 vref-supply = <&vddio_ao1v8>;
412};
413
414/* SDIO */
415&sd_emmc_a {
416 status = "okay";
417 pinctrl-0 = <&sdio_pins>;
418 pinctrl-1 = <&sdio_clk_gate_pins>;
419 pinctrl-names = "default", "clk-gate";
420 #address-cells = <1>;
421 #size-cells = <0>;
422
423 bus-width = <4>;
424 cap-sd-highspeed;
425 sd-uhs-sdr50;
426 max-frequency = <100000000>;
427
428 non-removable;
429 disable-wp;
430
431 /* WiFi firmware requires power to be kept while in suspend */
432 keep-power-in-suspend;
433
434 mmc-pwrseq = <&sdio_pwrseq>;
435
436 vmmc-supply = <&vddao_3v3>;
437 vqmmc-supply = <&vddio_ao1v8>;
438
439 brcmf: wifi@1 {
440 reg = <1>;
441 compatible = "brcm,bcm4329-fmac";
442 };
443};
444
445/* SD card */
446&sd_emmc_b {
447 status = "okay";
448 pinctrl-0 = <&sdcard_c_pins>;
449 pinctrl-1 = <&sdcard_clk_gate_c_pins>;
450 pinctrl-names = "default", "clk-gate";
451
452 bus-width = <4>;
453 cap-sd-highspeed;
454 max-frequency = <50000000>;
455 disable-wp;
456
457 cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
458 vmmc-supply = <&vddao_3v3>;
459 vqmmc-supply = <&vddao_3v3>;
460};
461
462/* eMMC */
463&sd_emmc_c {
464 status = "okay";
465 pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
466 pinctrl-1 = <&emmc_clk_gate_pins>;
467 pinctrl-names = "default", "clk-gate";
468
469 bus-width = <8>;
470 cap-mmc-highspeed;
471 mmc-ddr-1_8v;
472 mmc-hs200-1_8v;
473 max-frequency = <200000000>;
474 non-removable;
475 disable-wp;
476
477 mmc-pwrseq = <&emmc_pwrseq>;
478 vmmc-supply = <&vddao_3v3>;
479 vqmmc-supply = <&emmc_1v8>;
480};
481
482&tdmif_a {
483 pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>;
484 pinctrl-names = "default";
485 status = "okay";
486
487 assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>,
488 <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>;
489 assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
490 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
491 assigned-clock-rates = <0>, <0>;
492};
493
494&tdmif_b {
495 status = "okay";
496};
497
498&tdmin_a {
499 status = "okay";
500};
501
502&tdmin_b {
503 status = "okay";
504};
505
506&tdmout_a {
507 status = "okay";
508};
509
510&tdmout_b {
511 status = "okay";
512};
513
514&toddr_a {
515 status = "okay";
516};
517
518&toddr_b {
519 status = "okay";
520};
521
522&toddr_c {
523 status = "okay";
524};
525
526&tohdmitx {
527 status = "okay";
528};
529
530&uart_A {
531 status = "okay";
532 pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
533 pinctrl-names = "default";
534 uart-has-rtscts;
535
536 bluetooth {
537 compatible = "brcm,bcm43438-bt";
538 shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
539 max-speed = <2000000>;
540 clocks = <&wifi32k>;
541 clock-names = "lpo";
542 vbat-supply = <&vddao_3v3>;
543 vddio-supply = <&vddio_ao1v8>;
544 };
545};
546
547&uart_AO {
548 status = "okay";
549 pinctrl-0 = <&uart_ao_a_pins>;
550 pinctrl-names = "default";
551};
552
553&usb {
554 status = "okay";
555 dr_mode = "host";
556};