Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 53633a893a06bd5a0c807287d9cc29337806eaf7 / . / src / arm64 / amlogic / meson-g12a-sei510.dts
blob: 0ad0c2b7dfefcb2acb6865d3378767889d603eb4 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame^]1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2019 BayLibre SAS. All rights reserved.
4 */
5
6/dts-v1/;
7
8#include "meson-g12a.dtsi"
9#include <dt-bindings/gpio/gpio.h>
10#include <dt-bindings/input/input.h>
11#include <dt-bindings/gpio/meson-g12a-gpio.h>
12#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
13
14/ {
15 compatible = "seirobotics,sei510", "amlogic,g12a";
16 model = "SEI Robotics SEI510";
17
18 adc_keys {
19 compatible = "adc-keys";
20 io-channels = <&saradc 0>;
21 io-channel-names = "buttons";
22 keyup-threshold-microvolt = <1800000>;
23
24 button-onoff {
25 label = "On/Off";
26 linux,code = <KEY_POWER>;
27 press-threshold-microvolt = <1700000>;
28 };
29 };
30
31 aliases {
32 serial0 = &uart_AO;
33 ethernet0 = &ethmac;
34 };
35
36 mono_dac: audio-codec-0 {
37 compatible = "maxim,max98357a";
38 #sound-dai-cells = <0>;
39 sound-name-prefix = "U16";
40 sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>;
41 };
42
43 dmics: audio-codec-1 {
44 #sound-dai-cells = <0>;
45 compatible = "dmic-codec";
46 num-channels = <2>;
47 wakeup-delay-ms = <50>;
48 status = "okay";
49 sound-name-prefix = "MIC";
50 };
51
52 chosen {
53 stdout-path = "serial0:115200n8";
54 };
55
56 cvbs-connector {
57 compatible = "composite-video-connector";
58
59 port {
60 cvbs_connector_in: endpoint {
61 remote-endpoint = <&cvbs_vdac_out>;
62 };
63 };
64 };
65
66 emmc_pwrseq: emmc-pwrseq {
67 compatible = "mmc-pwrseq-emmc";
68 reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
69 };
70
71 hdmi-connector {
72 compatible = "hdmi-connector";
73 type = "a";
74
75 port {
76 hdmi_connector_in: endpoint {
77 remote-endpoint = <&hdmi_tx_tmds_out>;
78 };
79 };
80 };
81
82 memory@0 {
83 device_type = "memory";
84 reg = <0x0 0x0 0x0 0x40000000>;
85 };
86
87 ao_5v: regulator-ao_5v {
88 compatible = "regulator-fixed";
89 regulator-name = "AO_5V";
90 regulator-min-microvolt = <5000000>;
91 regulator-max-microvolt = <5000000>;
92 vin-supply = <&dc_in>;
93 regulator-always-on;
94 };
95
96 dc_in: regulator-dc_in {
97 compatible = "regulator-fixed";
98 regulator-name = "DC_IN";
99 regulator-min-microvolt = <5000000>;
100 regulator-max-microvolt = <5000000>;
101 regulator-always-on;
102 };
103
104 emmc_1v8: regulator-emmc_1v8 {
105 compatible = "regulator-fixed";
106 regulator-name = "EMMC_1V8";
107 regulator-min-microvolt = <1800000>;
108 regulator-max-microvolt = <1800000>;
109 vin-supply = <&vddao_3v3>;
110 regulator-always-on;
111 };
112
113 vddao_3v3: regulator-vddao_3v3 {
114 compatible = "regulator-fixed";
115 regulator-name = "VDDAO_3V3";
116 regulator-min-microvolt = <3300000>;
117 regulator-max-microvolt = <3300000>;
118 vin-supply = <&dc_in>;
119 regulator-always-on;
120 };
121
122 vddao_3v3_t: regultor-vddao_3v3_t {
123 compatible = "regulator-fixed";
124 regulator-name = "VDDAO_3V3_T";
125 regulator-min-microvolt = <3300000>;
126 regulator-max-microvolt = <3300000>;
127 vin-supply = <&vddao_3v3>;
128 gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
129 enable-active-high;
130 };
131
132 vddcpu: regulator-vddcpu {
133 /*
134 * SY8120B1ABC DC/DC Regulator.
135 */
136 compatible = "pwm-regulator";
137
138 regulator-name = "VDDCPU";
139 regulator-min-microvolt = <721000>;
140 regulator-max-microvolt = <1022000>;
141
142 pwm-supply = <&dc_in>;
143
144 pwms = <&pwm_AO_cd 1 1250 0>;
145 pwm-dutycycle-range = <100 0>;
146
147 regulator-boot-on;
148 regulator-always-on;
149 };
150
151 vddio_ao1v8: regulator-vddio_ao1v8 {
152 compatible = "regulator-fixed";
153 regulator-name = "VDDIO_AO1V8";
154 regulator-min-microvolt = <1800000>;
155 regulator-max-microvolt = <1800000>;
156 vin-supply = <&vddao_3v3>;
157 regulator-always-on;
158 };
159
160 sdio_pwrseq: sdio-pwrseq {
161 compatible = "mmc-pwrseq-simple";
162 reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
163 clocks = <&wifi32k>;
164 clock-names = "ext_clock";
165 };
166
167 wifi32k: wifi32k {
168 compatible = "pwm-clock";
169 #clock-cells = <0>;
170 clock-frequency = <32768>;
171 pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
172 };
173
174 sound {
175 compatible = "amlogic,axg-sound-card";
176 model = "SEI510";
177 audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
178 <&tdmin_a>, <&tdmin_b>;
179 audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
180 "TDMOUT_A IN 1", "FRDDR_B OUT 0",
181 "TDMOUT_A IN 2", "FRDDR_C OUT 0",
182 "TDM_A Playback", "TDMOUT_A OUT",
183 "TDMOUT_B IN 0", "FRDDR_A OUT 1",
184 "TDMOUT_B IN 1", "FRDDR_B OUT 1",
185 "TDMOUT_B IN 2", "FRDDR_C OUT 1",
186 "TDM_B Playback", "TDMOUT_B OUT",
187 "TODDR_A IN 4", "PDM Capture",
188 "TODDR_B IN 4", "PDM Capture",
189 "TODDR_C IN 4", "PDM Capture",
190 "TDMIN_A IN 0", "TDM_A Capture",
191 "TDMIN_A IN 3", "TDM_A Loopback",
192 "TDMIN_B IN 0", "TDM_A Capture",
193 "TDMIN_B IN 3", "TDM_A Loopback",
194 "TDMIN_A IN 1", "TDM_B Capture",
195 "TDMIN_A IN 4", "TDM_B Loopback",
196 "TDMIN_B IN 1", "TDM_B Capture",
197 "TDMIN_B IN 4", "TDM_B Loopback",
198 "TODDR_A IN 0", "TDMIN_A OUT",
199 "TODDR_B IN 0", "TDMIN_A OUT",
200 "TODDR_C IN 0", "TDMIN_A OUT",
201 "TODDR_A IN 1", "TDMIN_B OUT",
202 "TODDR_B IN 1", "TDMIN_B OUT",
203 "TODDR_C IN 1", "TDMIN_B OUT";
204
205 assigned-clocks = <&clkc CLKID_MPLL2>,
206 <&clkc CLKID_MPLL0>,
207 <&clkc CLKID_MPLL1>;
208 assigned-clock-parents = <0>, <0>, <0>;
209 assigned-clock-rates = <294912000>,
210 <270950400>,
211 <393216000>;
212
213 dai-link-0 {
214 sound-dai = <&frddr_a>;
215 };
216
217 dai-link-1 {
218 sound-dai = <&frddr_b>;
219 };
220
221 dai-link-2 {
222 sound-dai = <&frddr_c>;
223 };
224
225 dai-link-3 {
226 sound-dai = <&toddr_a>;
227 };
228
229 dai-link-4 {
230 sound-dai = <&toddr_b>;
231 };
232
233 dai-link-5 {
234 sound-dai = <&toddr_c>;
235 };
236
237 /* internal speaker interface */
238 dai-link-6 {
239 sound-dai = <&tdmif_a>;
240 dai-format = "i2s";
241 dai-tdm-slot-tx-mask-0 = <1 1>;
242 mclk-fs = <256>;
243
244 codec-0 {
245 sound-dai = <&mono_dac>;
246 };
247
248 codec-1 {
249 sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
250 };
251 };
252
253 /* 8ch hdmi interface */
254 dai-link-7 {
255 sound-dai = <&tdmif_b>;
256 dai-format = "i2s";
257 dai-tdm-slot-tx-mask-0 = <1 1>;
258 dai-tdm-slot-tx-mask-1 = <1 1>;
259 dai-tdm-slot-tx-mask-2 = <1 1>;
260 dai-tdm-slot-tx-mask-3 = <1 1>;
261 mclk-fs = <256>;
262
263 codec {
264 sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
265 };
266 };
267
268 /* internal digital mics */
269 dai-link-8 {
270 sound-dai = <&pdm>;
271
272 codec {
273 sound-dai = <&dmics>;
274 };
275 };
276
277 /* hdmi glue */
278 dai-link-9 {
279 sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
280
281 codec {
282 sound-dai = <&hdmi_tx>;
283 };
284 };
285 };
286};
287
288&arb {
289 status = "okay";
290};
291
292&cec_AO {
293 pinctrl-0 = <&cec_ao_a_h_pins>;
294 pinctrl-names = "default";
295 status = "disabled";
296 hdmi-phandle = <&hdmi_tx>;
297};
298
299&cecb_AO {
300 pinctrl-0 = <&cec_ao_b_h_pins>;
301 pinctrl-names = "default";
302 status = "okay";
303 hdmi-phandle = <&hdmi_tx>;
304};
305
306&clkc_audio {
307 status = "okay";
308};
309
310&cpu0 {
311 cpu-supply = <&vddcpu>;
312 operating-points-v2 = <&cpu_opp_table>;
313 clocks = <&clkc CLKID_CPU_CLK>;
314 clock-latency = <50000>;
315};
316
317&cpu1 {
318 cpu-supply = <&vddcpu>;
319 operating-points-v2 = <&cpu_opp_table>;
320 clocks = <&clkc CLKID_CPU_CLK>;
321 clock-latency = <50000>;
322};
323
324&cpu2 {
325 cpu-supply = <&vddcpu>;
326 operating-points-v2 = <&cpu_opp_table>;
327 clocks = <&clkc CLKID_CPU_CLK>;
328 clock-latency = <50000>;
329};
330
331&cpu3 {
332 cpu-supply = <&vddcpu>;
333 operating-points-v2 = <&cpu_opp_table>;
334 clocks = <&clkc CLKID_CPU_CLK>;
335 clock-latency = <50000>;
336};
337
338&cvbs_vdac_port {
339 cvbs_vdac_out: endpoint {
340 remote-endpoint = <&cvbs_connector_in>;
341 };
342};
343
344&ethmac {
345 status = "okay";
346 phy-handle = <&internal_ephy>;
347 phy-mode = "rmii";
348};
349
350&frddr_a {
351 status = "okay";
352};
353
354&frddr_b {
355 status = "okay";
356};
357
358&frddr_c {
359 status = "okay";
360};
361
362&hdmi_tx {
363 status = "okay";
364 pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
365 pinctrl-names = "default";
366};
367
368&hdmi_tx_tmds_port {
369 hdmi_tx_tmds_out: endpoint {
370 remote-endpoint = <&hdmi_connector_in>;
371 };
372};
373
374&i2c3 {
375 status = "okay";
376 pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
377 pinctrl-names = "default";
378};
379
380&ir {
381 status = "okay";
382 pinctrl-0 = <&remote_input_ao_pins>;
383 pinctrl-names = "default";
384};
385
386&pwm_AO_cd {
387 pinctrl-0 = <&pwm_ao_d_e_pins>;
388 pinctrl-names = "default";
389 clocks = <&xtal>;
390 clock-names = "clkin1";
391 status = "okay";
392};
393
394&pwm_ef {
395 status = "okay";
396 pinctrl-0 = <&pwm_e_pins>;
397 pinctrl-names = "default";
398 clocks = <&xtal>;
399 clock-names = "clkin0";
400};
401
402&pdm {
403 pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>,
404 <&pdm_din2_z_pins>, <&pdm_din3_z_pins>,
405 <&pdm_dclk_z_pins>;
406 pinctrl-names = "default";
407 status = "okay";
408};
409
410&saradc {
411 status = "okay";
412 vref-supply = <&vddio_ao1v8>;
413};
414
415/* SDIO */
416&sd_emmc_a {
417 status = "okay";
418 pinctrl-0 = <&sdio_pins>;
419 pinctrl-1 = <&sdio_clk_gate_pins>;
420 pinctrl-names = "default", "clk-gate";
421 #address-cells = <1>;
422 #size-cells = <0>;
423
424 bus-width = <4>;
425 cap-sd-highspeed;
426 sd-uhs-sdr50;
427 max-frequency = <100000000>;
428
429 non-removable;
430 disable-wp;
431
432 /* WiFi firmware requires power to be kept while in suspend */
433 keep-power-in-suspend;
434
435 mmc-pwrseq = <&sdio_pwrseq>;
436
437 vmmc-supply = <&vddao_3v3>;
438 vqmmc-supply = <&vddio_ao1v8>;
439
440 brcmf: wifi@1 {
441 reg = <1>;
442 compatible = "brcm,bcm4329-fmac";
443 };
444};
445
446/* SD card */
447&sd_emmc_b {
448 status = "okay";
449 pinctrl-0 = <&sdcard_c_pins>;
450 pinctrl-1 = <&sdcard_clk_gate_c_pins>;
451 pinctrl-names = "default", "clk-gate";
452
453 bus-width = <4>;
454 cap-sd-highspeed;
455 max-frequency = <50000000>;
456 disable-wp;
457
458 cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
459 vmmc-supply = <&vddao_3v3>;
460 vqmmc-supply = <&vddao_3v3>;
461};
462
463/* eMMC */
464&sd_emmc_c {
465 status = "okay";
466 pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
467 pinctrl-1 = <&emmc_clk_gate_pins>;
468 pinctrl-names = "default", "clk-gate";
469
470 bus-width = <8>;
471 cap-mmc-highspeed;
472 mmc-ddr-1_8v;
473 mmc-hs200-1_8v;
474 max-frequency = <200000000>;
475 non-removable;
476 disable-wp;
477
478 mmc-pwrseq = <&emmc_pwrseq>;
479 vmmc-supply = <&vddao_3v3>;
480 vqmmc-supply = <&emmc_1v8>;
481};
482
483&tdmif_a {
484 pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>;
485 pinctrl-names = "default";
486 status = "okay";
487
488 assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>,
489 <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>;
490 assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
491 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
492 assigned-clock-rates = <0>, <0>;
493};
494
495&tdmif_b {
496 status = "okay";
497};
498
499&tdmin_a {
500 status = "okay";
501};
502
503&tdmin_b {
504 status = "okay";
505};
506
507&tdmout_a {
508 status = "okay";
509};
510
511&tdmout_b {
512 status = "okay";
513};
514
515&toddr_a {
516 status = "okay";
517};
518
519&toddr_b {
520 status = "okay";
521};
522
523&toddr_c {
524 status = "okay";
525};
526
527&tohdmitx {
528 status = "okay";
529};
530
531&uart_A {
532 status = "okay";
533 pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
534 pinctrl-names = "default";
535 uart-has-rtscts;
536
537 bluetooth {
538 compatible = "brcm,bcm43438-bt";
539 shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
540 max-speed = <2000000>;
541 clocks = <&wifi32k>;
542 clock-names = "lpo";
543 vbat-supply = <&vddao_3v3>;
544 vddio-supply = <&vddio_ao1v8>;
545 };
546};
547
548&uart_AO {
549 status = "okay";
550 pinctrl-0 = <&uart_ao_a_pins>;
551 pinctrl-names = "default";
552};
553
554&usb {
555 status = "okay";
556 dr_mode = "host";
557};