blob: 0556e4b3509e6b1e8b50d69bb98add96c1fef4f0 [file] [log] [blame]
Masahiro Yamada82069432014-10-03 19:21:07 +09001menu "Panasonic UniPhier platform"
2 depends on ARCH_UNIPHIER
3
Masahiro Yamada82069432014-10-03 19:21:07 +09004config SYS_SOC
Masahiro Yamada82069432014-10-03 19:21:07 +09005 default "uniphier"
6
7config SYS_CONFIG_NAME
Masahiro Yamada1e72b1c2014-12-06 00:03:22 +09008 default "uniphier"
Masahiro Yamada82069432014-10-03 19:21:07 +09009
Masahiro Yamadaa6185612014-12-06 00:03:20 +090010config UNIPHIER_SMP
11 bool
12
Masahiro Yamada82069432014-10-03 19:21:07 +090013choice
14 prompt "UniPhier SoC select"
15
16config MACH_PH1_PRO4
17 bool "PH1-Pro4"
Masahiro Yamadaa6185612014-12-06 00:03:20 +090018 select UNIPHIER_SMP
Masahiro Yamada82069432014-10-03 19:21:07 +090019
20config MACH_PH1_LD4
21 bool "PH1-LD4"
22
23config MACH_PH1_SLD8
24 bool "PH1-sLD8"
25
26endchoice
27
Masahiro Yamada39c450d2014-12-06 00:03:21 +090028choice
29 prompt "UniPhier Support Card select"
30 optional
31
32config PFC_MICRO_SUPPORT_CARD
33 bool "Support card with PFC CPLD"
34 help
35 This option provides support for the expansion board with PFC
36 original address mapping.
37
38 Say Y to use the on-board UART, Ether, LED devices.
39
40config DCC_MICRO_SUPPORT_CARD
41 bool "Support card with DCC CPLD"
42 help
43 This option provides support for the expansion board with DCC-
44 arranged address mapping that is compatible with legacy UniPhier
45 reference boards.
46
47 Say Y to use the on-board UART, Ether, LED devices.
48
49endchoice
50
Masahiro Yamada4b5e7e32014-10-20 20:45:22 +090051config CMD_PINMON
52 bool "Enable boot mode pins monitor command"
53 depends on !SPL_BUILD
54 default y
55 help
56 The command "pinmon" shows the state of the boot mode pins.
57 The boot mode pins are latched when the system reset is deasserted
58 and determine which device the system should load a boot image from.
59
Masahiro Yamada05154a22014-11-11 22:18:22 +090060config SOC_INIT
61 bool
62 default SPL_BUILD
63
Masahiro Yamadab0c79042014-11-06 20:16:42 +090064config DRAM_INIT
65 bool
66 default SPL_BUILD
67
Masahiro Yamada8f899ed2014-12-19 20:20:53 +090068config CMD_DDRPHY_DUMP
69 bool "Enable dump command of DDR PHY parameters"
70 depends on !SPL_BUILD
71 help
72 The command "ddrphy" shows the resulting parameters of DDR PHY
73 training; it is useful for the evaluation of DDR PHY training.
74
Masahiro Yamadab0c79042014-11-06 20:16:42 +090075choice
76 prompt "DDR3 Frequency select"
77 depends on DRAM_INIT
78
79config DDR_FREQ_1600
80 bool "DDR3 1600"
81 depends on MACH_PH1_PRO4 || MACH_PH1_LD4
82
83config DDR_FREQ_1333
84 bool "DDR3 1333"
85 depends on MACH_PH1_LD4 || MACH_PH1_SLD8
86
87endchoice
88
89config DDR_FREQ
90 int
91 default 1333 if DDR_FREQ_1333
92 default 1600 if DDR_FREQ_1600
93
Masahiro Yamada82069432014-10-03 19:21:07 +090094endmenu