blob: 4f36930a94118924e985aede6cd8997faa6cb011 [file] [log] [blame]
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +03001/*
2 * Config file for Compulab CM-FX6 board
3 *
4 * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
5 *
6 * Author: Nikita Kiryanov <nikita@compulab.co.il>
7 *
8 * SPDX-License-Identifier: GPL-2.0+
9 */
10
11#ifndef __CONFIG_CM_FX6_H
12#define __CONFIG_CM_FX6_H
13
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +030014#include "mx6_common.h"
15
16/* Machine config */
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +030017#define CONFIG_SYS_LITTLE_ENDIAN
18#define CONFIG_MACH_TYPE 4273
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +030019
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +030020/* MMC */
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +030021#define CONFIG_SYS_FSL_USDHC_NUM 3
22#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
23
24/* RAM */
25#define PHYS_SDRAM_1 MMDC0_ARB_BASE_ADDR
26#define PHYS_SDRAM_2 MMDC1_ARB_BASE_ADDR
27#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
28#define CONFIG_NR_DRAM_BANKS 2
29#define CONFIG_SYS_MEMTEST_START 0x10000000
30#define CONFIG_SYS_MEMTEST_END 0x10010000
31#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
32#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
33#define CONFIG_SYS_INIT_SP_OFFSET \
34 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
35#define CONFIG_SYS_INIT_SP_ADDR \
36 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
37
38/* Serial console */
39#define CONFIG_MXC_UART
40#define CONFIG_MXC_UART_BASE UART4_BASE
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +030041#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
42
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +030043/* SPI flash */
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +030044#define CONFIG_SF_DEFAULT_BUS 0
45#define CONFIG_SF_DEFAULT_CS 0
46#define CONFIG_SF_DEFAULT_SPEED 25000000
47#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
48
Christopher Spinrath7e34e372016-07-12 23:37:37 +020049/* MTD support */
50#ifndef CONFIG_SPL_BUILD
Christopher Spinrath7e34e372016-07-12 23:37:37 +020051#define CONFIG_MTD_DEVICE
52#define CONFIG_MTD_PARTITIONS
53#define CONFIG_SPI_FLASH_MTD
54#endif
55
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +030056/* Environment */
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +030057#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
58#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
59#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
60#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
61#define CONFIG_ENV_SECT_SIZE (64 * 1024)
62#define CONFIG_ENV_SIZE (8 * 1024)
63#define CONFIG_ENV_OFFSET (768 * 1024)
64
Christopher Spinratha6715922017-12-09 16:37:42 +010065#ifndef CONFIG_SPL_BUILD
Christopher Spinrathf306a5a2018-01-09 22:01:35 +010066#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +030067#define CONFIG_EXTRA_ENV_SETTINGS \
Christopher Spinrathbf785172017-12-09 16:37:41 +010068 "fdt_high=0xffffffff\0" \
69 "initrd_high=0xffffffff\0" \
70 "fdt_addr_r=0x18000000\0" \
71 "ramdisk_addr_r=0x13000000\0" \
72 "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
73 "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
74 "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
Christopher Spinrath1e22f262018-01-09 22:01:36 +010075 "fdtfile=undefined\0" \
Nikita Kiryanovd6027a92015-01-14 10:42:48 +020076 "stdin=serial,usbkbd\0" \
Nikita Kiryanov89581372015-01-14 10:42:46 +020077 "stdout=serial,vga\0" \
78 "stderr=serial,vga\0" \
79 "panel=HDMI\0" \
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +030080 "autoload=no\0" \
Christopher Spinrathb74aed92016-07-12 23:37:34 +020081 "uImage=uImage-cm-fx6\0" \
82 "zImage=zImage-cm-fx6\0" \
Nikita Kiryanovb5936492015-01-14 10:42:41 +020083 "kernel=uImage-cm-fx6\0" \
Nikita Kiryanovb5936492015-01-14 10:42:41 +020084 "dtb=cm-fx6.dtb\0" \
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +030085 "console=ttymxc3,115200\0" \
86 "ethprime=FEC0\0" \
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +030087 "video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
88 "video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
Christopher Spinrathbf785172017-12-09 16:37:41 +010089 "doboot=bootm ${kernel_addr_r}\0" \
Nikita Kiryanovb5936492015-01-14 10:42:41 +020090 "doloadfdt=false\0" \
Tom Rini5ad8e112017-10-22 17:55:07 -040091 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
92 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
Christopher Spinrathb74aed92016-07-12 23:37:34 +020093 "setboottypez=setenv kernel ${zImage};" \
Christopher Spinrathbf785172017-12-09 16:37:41 +010094 "setenv doboot bootz ${kernel_addr_r} - ${fdt_addr_r};" \
Nikita Kiryanovb5936492015-01-14 10:42:41 +020095 "setenv doloadfdt true;\0" \
Christopher Spinrathb74aed92016-07-12 23:37:34 +020096 "setboottypem=setenv kernel ${uImage};" \
Christopher Spinrathbf785172017-12-09 16:37:41 +010097 "setenv doboot bootm ${kernel_addr_r};" \
Nikita Kiryanovb5936492015-01-14 10:42:41 +020098 "setenv doloadfdt false;\0"\
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +030099 "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
Nikita Kiryanov2fe0b7b2014-08-20 15:09:06 +0300100 "sataroot=/dev/sda2 rw rootwait\0" \
Nikita Kiryanov59d06092014-08-20 15:09:01 +0300101 "nandroot=/dev/mtdblock4 rw\0" \
102 "nandrootfstype=ubifs\0" \
Nikita Kiryanovb5936492015-01-14 10:42:41 +0200103 "mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
Christopher Spinrathb74aed92016-07-12 23:37:34 +0200104 "${video} ${extrabootargs}\0" \
Nikita Kiryanovb5936492015-01-14 10:42:41 +0200105 "sataargs=setenv bootargs console=${console} root=${sataroot} " \
Christopher Spinrathb74aed92016-07-12 23:37:34 +0200106 "${video} ${extrabootargs}\0" \
Nikita Kiryanov59d06092014-08-20 15:09:01 +0300107 "nandargs=setenv bootargs console=${console} " \
108 "root=${nandroot} " \
109 "rootfstype=${nandrootfstype} " \
Christopher Spinrathb74aed92016-07-12 23:37:34 +0200110 "${video} ${extrabootargs}\0" \
Nikita Kiryanovb5936492015-01-14 10:42:41 +0200111 "nandboot=if run nandloadkernel; then " \
Nikita Kiryanov59d06092014-08-20 15:09:01 +0300112 "run nandloadfdt;" \
Nikita Kiryanovb5936492015-01-14 10:42:41 +0200113 "run setboottypem;" \
114 "run storagebootcmd;" \
115 "run setboottypez;" \
116 "run storagebootcmd;" \
117 "fi;\0" \
118 "run_eboot=echo Starting EBOOT ...; "\
119 "mmc dev 2 && " \
120 "mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
Christopher Spinrathbf785172017-12-09 16:37:41 +0100121 "loadkernel=load ${storagetype} ${storagedev} ${kernel_addr_r} ${kernel};\0"\
122 "loadfdt=load ${storagetype} ${storagedev} ${fdt_addr_r} ${dtb};\0" \
Christopher Spinrathbf785172017-12-09 16:37:41 +0100123 "nandloadkernel=nand read ${kernel_addr_r} 0 780000;\0" \
124 "nandloadfdt=nand read ${fdt_addr_r} 780000 80000;\0" \
Nikita Kiryanovb5936492015-01-14 10:42:41 +0200125 "setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \
126 "setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \
127 "setupnandboot=setenv storagetype nand;\0" \
Nikita Kiryanovb5936492015-01-14 10:42:41 +0200128 "storagebootcmd=echo Booting from ${storagetype} ...;" \
129 "run ${storagetype}args; run doboot;\0" \
130 "trybootk=if run loadkernel; then " \
131 "if ${doloadfdt}; then " \
132 "run loadfdt;" \
Nikita Kiryanov59d06092014-08-20 15:09:01 +0300133 "fi;" \
Nikita Kiryanovb5936492015-01-14 10:42:41 +0200134 "run storagebootcmd;" \
135 "fi;\0" \
Christopher Spinrathcae5b2e2017-12-09 16:37:43 +0100136 "trybootsmz=" \
Nikita Kiryanovb5936492015-01-14 10:42:41 +0200137 "run setboottypem;" \
138 "run trybootk;" \
139 "run setboottypez;" \
Christopher Spinratha6715922017-12-09 16:37:42 +0100140 "run trybootk;\0" \
141 "legacy_bootcmd=" \
142 "run setupmmcboot;" \
143 "mmc dev ${storagedev};" \
144 "if mmc rescan; then " \
145 "run trybootsmz;" \
Nikita Kiryanovb5936492015-01-14 10:42:41 +0200146 "fi;" \
Christopher Spinratha6715922017-12-09 16:37:42 +0100147 "run setupsataboot;" \
148 "if sata init; then " \
149 "run trybootsmz;" \
150 "fi;" \
151 "run setupnandboot;" \
152 "run nandboot;\0" \
Christopher Spinrath1e22f262018-01-09 22:01:36 +0100153 "findfdt="\
154 "if test $board_name = Utilite && test $board_rev = MX6Q ; then " \
155 "setenv fdtfile imx6q-utilite-pro.dtb; fi; " \
156 "if test $fdtfile = undefined; then " \
157 "echo WARNING: Could not determine dtb to use; fi; \0" \
Christopher Spinratha6715922017-12-09 16:37:42 +0100158 BOOTENV
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +0300159
Christopher Spinrath7e34e372016-07-12 23:37:37 +0200160#define CONFIG_PREBOOT "usb start;sf probe"
Nikita Kiryanovd6027a92015-01-14 10:42:48 +0200161
Christopher Spinratha6715922017-12-09 16:37:42 +0100162#define BOOT_TARGET_DEVICES(func) \
163 func(USB, usb, 0) \
164 func(MMC, mmc, 2) \
165 func(SATA, sata, 0)
166
167#include <config_distro_bootcmd.h>
168#else
169#define CONFIG_EXTRA_ENV_SETTINGS
170#endif
171
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +0300172/* SPI */
173#define CONFIG_SPI
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +0300174
Nikita Kiryanov59d06092014-08-20 15:09:01 +0300175/* NAND */
176#ifndef CONFIG_SPL_BUILD
Nikita Kiryanov59d06092014-08-20 15:09:01 +0300177#define CONFIG_SYS_NAND_BASE 0x40000000
178#define CONFIG_SYS_NAND_MAX_CHIPS 1
179#define CONFIG_SYS_MAX_NAND_DEVICE 1
Nikita Kiryanov59d06092014-08-20 15:09:01 +0300180#define CONFIG_SYS_NAND_ONFI_DETECTION
181/* APBH DMA is required for NAND support */
Nikita Kiryanov59d06092014-08-20 15:09:01 +0300182#endif
183
Nikita Kiryanov5d95fd82014-08-20 15:09:02 +0300184/* Ethernet */
185#define CONFIG_FEC_MXC
186#define CONFIG_FEC_MXC_PHYADDR 0
187#define CONFIG_FEC_XCV_TYPE RGMII
188#define IMX_FEC_BASE ENET_BASE_ADDR
Nikita Kiryanov5d95fd82014-08-20 15:09:02 +0300189#define CONFIG_PHY_ATHEROS
190#define CONFIG_MII
191#define CONFIG_ETHPRIME "FEC0"
192#define CONFIG_ARP_TIMEOUT 200UL
Nikita Kiryanov5d95fd82014-08-20 15:09:02 +0300193#define CONFIG_NET_RETRY_COUNT 5
194
Nikita Kiryanova2f2f3c2014-08-20 15:09:03 +0300195/* USB */
Nikita Kiryanova2f2f3c2014-08-20 15:09:03 +0300196#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
197#define CONFIG_MXC_USB_FLAGS 0
198#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
199#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
200
Nikita Kiryanov675a1d92014-08-20 15:09:04 +0300201/* I2C */
Nikita Kiryanov675a1d92014-08-20 15:09:04 +0300202#define CONFIG_SYS_I2C
203#define CONFIG_SYS_I2C_MXC
Albert ARIBAUD \\(3ADEV\\)eb943872015-09-21 22:43:38 +0200204#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
205#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
York Sunf1a52162015-03-20 10:20:40 -0700206#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
Nikita Kiryanov675a1d92014-08-20 15:09:04 +0300207#define CONFIG_SYS_I2C_SPEED 100000
208#define CONFIG_SYS_MXC_I2C3_SPEED 400000
209
210#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
211#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
212#define CONFIG_SYS_I2C_EEPROM_BUS 2
213
Nikita Kiryanov2fe0b7b2014-08-20 15:09:06 +0300214/* SATA */
Nikita Kiryanov2fe0b7b2014-08-20 15:09:06 +0300215#define CONFIG_SYS_SATA_MAX_DEVICE 1
Nikita Kiryanov2fe0b7b2014-08-20 15:09:06 +0300216#define CONFIG_LBA48
Nikita Kiryanov2fe0b7b2014-08-20 15:09:06 +0300217#define CONFIG_DWC_AHSATA_PORT_ID 0
218#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
219
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +0300220/* Boot */
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +0300221#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
Nikita Kiryanov266728a2014-08-20 15:09:05 +0300222#define CONFIG_SERIAL_TAG
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +0300223
224/* misc */
Nikita Kiryanov03f92562015-01-14 10:42:45 +0200225#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
Nikita Kiryanovc69901b2015-08-30 15:36:48 +0300226#define CONFIG_MISC_INIT_R
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +0300227
228/* SPL */
229#include "imx6_spl.h"
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +0300230#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
231#define CONFIG_SPL_SPI_LOAD
232
Nikita Kiryanov89581372015-01-14 10:42:46 +0200233/* Display */
Nikita Kiryanov89581372015-01-14 10:42:46 +0200234#define CONFIG_VIDEO_IPUV3
Nikita Kiryanov89581372015-01-14 10:42:46 +0200235#define CONFIG_IMX_HDMI
Nikita Kiryanov89581372015-01-14 10:42:46 +0200236
Nikita Kiryanov12ffcf42015-01-14 10:42:53 +0200237#define CONFIG_SPLASH_SCREEN
Nikita Kiryanov7f9ceea2015-01-14 10:42:54 +0200238#define CONFIG_SPLASH_SOURCE
Nikita Kiryanov12ffcf42015-01-14 10:42:53 +0200239#define CONFIG_VIDEO_BMP_RLE8
240
Nikita Kiryanov597e0a02015-01-14 10:42:47 +0200241#define CONFIG_VIDEO_LOGO
242#define CONFIG_VIDEO_BMP_LOGO
243
Nikita Kiryanovb06e2552016-04-16 17:55:05 +0300244/* EEPROM */
Nikita Kiryanovb06e2552016-04-16 17:55:05 +0300245#define CONFIG_ENV_EEPROM_IS_ON_I2C
246#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
247#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
248#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
249#define CONFIG_SYS_EEPROM_SIZE 256
250
Nikita Kiryanovf5cab0f2014-09-07 18:59:29 +0300251#endif /* __CONFIG_CM_FX6_H */