Peng Fan | cbe5d38 | 2021-08-07 16:01:13 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 | /* |
| 3 | * Copyright 2021 NXP |
| 4 | */ |
| 5 | |
| 6 | /dts-v1/; |
| 7 | |
| 8 | #include "imx8ulp.dtsi" |
| 9 | |
| 10 | / { |
| 11 | model = "FSL i.MX8ULP EVK"; |
| 12 | compatible = "fsl,imx8ulp-evk", "fsl,imx8ulp"; |
| 13 | |
| 14 | chosen { |
| 15 | stdout-path = &lpuart5; |
| 16 | bootargs = "console=ttyLP1,115200 earlycon"; |
| 17 | }; |
| 18 | |
| 19 | usdhc2_pwrseq: usdhc2_pwrseq { |
| 20 | compatible = "mmc-pwrseq-simple"; |
| 21 | reset-gpios = <&pcal6408 2 GPIO_ACTIVE_LOW>; |
| 22 | }; |
| 23 | }; |
| 24 | |
| 25 | &lpuart5 { |
| 26 | /* console */ |
| 27 | pinctrl-names = "default", "sleep"; |
| 28 | pinctrl-0 = <&pinctrl_lpuart5>; |
| 29 | pinctrl-1 = <&pinctrl_lpuart5>; |
| 30 | status = "okay"; |
| 31 | }; |
| 32 | |
| 33 | &iomuxc1 { |
| 34 | pinctrl_lpuart5: lpuart5grp { |
| 35 | fsl,pins = < |
| 36 | MX8ULP_PAD_PTF14__LPUART5_TX 0x03 |
| 37 | MX8ULP_PAD_PTF15__LPUART5_RX 0x03 |
| 38 | >; |
| 39 | }; |
| 40 | |
| 41 | pinctrl_lpi2c7: lpi2c7grp { |
| 42 | fsl,pins = < |
| 43 | MX8ULP_PAD_PTE12__LPI2C7_SCL 0x27 |
| 44 | MX8ULP_PAD_PTE13__LPI2C7_SDA 0x27 |
| 45 | >; |
| 46 | }; |
| 47 | |
| 48 | pinctrl_usdhc0: usdhc0grp { |
| 49 | fsl,pins = < |
| 50 | MX8ULP_PAD_PTD0__SDHC0_RESET_B 0x43 |
| 51 | MX8ULP_PAD_PTD1__SDHC0_CMD 0x43 |
| 52 | MX8ULP_PAD_PTD2__SDHC0_CLK 0x10042 |
| 53 | MX8ULP_PAD_PTD10__SDHC0_D0 0x43 |
| 54 | MX8ULP_PAD_PTD9__SDHC0_D1 0x43 |
| 55 | MX8ULP_PAD_PTD8__SDHC0_D2 0x43 |
| 56 | MX8ULP_PAD_PTD7__SDHC0_D3 0x43 |
| 57 | MX8ULP_PAD_PTD6__SDHC0_D4 0x43 |
| 58 | MX8ULP_PAD_PTD5__SDHC0_D5 0x43 |
| 59 | MX8ULP_PAD_PTD4__SDHC0_D6 0x43 |
| 60 | MX8ULP_PAD_PTD3__SDHC0_D7 0x43 |
| 61 | MX8ULP_PAD_PTD11__SDHC0_DQS 0x10042 |
| 62 | >; |
| 63 | }; |
| 64 | |
| 65 | pinctrl_usdhc2_pte: usdhc2ptegrp { |
| 66 | fsl,pins = < |
| 67 | MX8ULP_PAD_PTE1__SDHC2_D0 0x43 |
| 68 | MX8ULP_PAD_PTE0__SDHC2_D1 0x43 |
| 69 | MX8ULP_PAD_PTE5__SDHC2_D2 0x43 |
| 70 | MX8ULP_PAD_PTE4__SDHC2_D3 0x43 |
| 71 | MX8ULP_PAD_PTE2__SDHC2_CLK 0x10042 |
| 72 | MX8ULP_PAD_PTE3__SDHC2_CMD 0x43 |
| 73 | MX8ULP_PAD_PTE7__PTE7 0x10003 |
| 74 | >; |
| 75 | }; |
| 76 | |
| 77 | pinctrl_fec: fecgrp { |
| 78 | fsl,pins = < |
| 79 | MX8ULP_PAD_PTE14__ENET0_MDIO 0x43 |
| 80 | MX8ULP_PAD_PTE15__ENET0_MDC 0x43 |
| 81 | MX8ULP_PAD_PTE18__ENET0_CRS_DV 0x43 |
| 82 | MX8ULP_PAD_PTE17__ENET0_RXER 0x43 |
| 83 | MX8ULP_PAD_PTF1__ENET0_RXD0 0x43 |
| 84 | MX8ULP_PAD_PTE20__ENET0_RXD1 0x43 |
| 85 | MX8ULP_PAD_PTE16__ENET0_TXEN 0x43 |
| 86 | MX8ULP_PAD_PTE23__ENET0_TXD0 0x43 |
| 87 | MX8ULP_PAD_PTE22__ENET0_TXD1 0x43 |
| 88 | MX8ULP_PAD_PTE19__ENET0_REFCLK 0x10043 |
| 89 | MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x10043 |
| 90 | >; |
| 91 | }; |
| 92 | |
| 93 | pinctrl_usbotg0_id: otg0idgrp { |
| 94 | fsl,pins = < |
| 95 | MX8ULP_PAD_PTF2__USB0_ID 0x10003 |
| 96 | >; |
| 97 | }; |
| 98 | |
| 99 | pinctrl_usbotg1_id: otg1idgrp { |
| 100 | fsl,pins = < |
| 101 | MX8ULP_PAD_PTD23__USB1_ID 0x10003 |
| 102 | >; |
| 103 | }; |
| 104 | }; |
| 105 | |
| 106 | &usdhc0 { |
| 107 | pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| 108 | pinctrl-0 = <&pinctrl_usdhc0>; |
| 109 | pinctrl-1 = <&pinctrl_usdhc0>; |
| 110 | pinctrl-2 = <&pinctrl_usdhc0>; |
| 111 | bus-width = <8>; |
| 112 | non-removable; |
| 113 | status = "okay"; |
| 114 | }; |
| 115 | |
| 116 | &usdhc2 { |
| 117 | pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; |
| 118 | pinctrl-0 = <&pinctrl_usdhc2_pte>; |
| 119 | pinctrl-1 = <&pinctrl_usdhc2_pte>; |
| 120 | pinctrl-2 = <&pinctrl_usdhc2_pte>; |
| 121 | pinctrl-3 = <&pinctrl_usdhc2_pte>; |
| 122 | mmc-pwrseq = <&usdhc2_pwrseq>; |
| 123 | max-frequency = <100000000>; |
| 124 | bus-width = <4>; |
| 125 | keep-power-in-suspend; |
| 126 | non-removable; |
| 127 | wakeup-source; |
| 128 | status = "okay"; |
| 129 | |
| 130 | wifi_wake_host { |
| 131 | compatible = "nxp,wifi-wake-host"; |
| 132 | interrupt-parent = <&gpioe>; |
| 133 | interrupts = <7 IRQ_TYPE_LEVEL_LOW>; |
| 134 | interrupt-names = "host-wake"; |
| 135 | }; |
| 136 | }; |
| 137 | |
| 138 | &lpi2c7 { |
| 139 | #address-cells = <1>; |
| 140 | #size-cells = <0>; |
| 141 | clock-frequency = <100000>; |
| 142 | pinctrl-names = "default"; |
| 143 | pinctrl-0 = <&pinctrl_lpi2c7>; |
| 144 | status = "okay"; |
| 145 | |
| 146 | pcal6408: gpio@21 { |
| 147 | compatible = "ti,tca6408"; |
| 148 | reg = <0x21>; |
| 149 | gpio-controller; |
| 150 | #gpio-cells = <2>; |
| 151 | }; |
| 152 | }; |
| 153 | |
| 154 | &flexspi0 { |
| 155 | status = "okay"; |
| 156 | |
| 157 | flash0: atxp032@0 { |
| 158 | reg = <0>; |
| 159 | #address-cells = <1>; |
| 160 | #size-cells = <1>; |
| 161 | compatible = "jedec,spi-nor"; |
| 162 | spi-max-frequency = <66000000>; |
| 163 | }; |
| 164 | }; |
| 165 | |
| 166 | &flexspi2 { |
| 167 | status = "okay"; |
| 168 | |
| 169 | flash1: mt35xu512aba@0 { |
| 170 | reg = <0>; |
| 171 | #address-cells = <1>; |
| 172 | #size-cells = <1>; |
| 173 | compatible = "jedec,spi-nor"; |
| 174 | spi-max-frequency = <29000000>; |
| 175 | spi-nor,ddr-quad-read-dummy = <8>; |
| 176 | }; |
| 177 | }; |
| 178 | |
| 179 | &fec { |
| 180 | pinctrl-names = "default"; |
| 181 | pinctrl-0 = <&pinctrl_fec>; |
| 182 | phy-mode = "rmii"; |
| 183 | phy-handle = <ðphy>; |
| 184 | status = "okay"; |
| 185 | |
| 186 | phy-reset-gpios = <&pcal6408 4 GPIO_ACTIVE_LOW>; |
| 187 | |
| 188 | mdio { |
| 189 | #address-cells = <1>; |
| 190 | #size-cells = <0>; |
| 191 | |
| 192 | ethphy: ethernet-phy@1 { |
| 193 | reg = <1>; |
| 194 | micrel,led-mode = <1>; |
| 195 | }; |
| 196 | }; |
| 197 | }; |
| 198 | |
| 199 | &usbotg0 { |
| 200 | pinctrl-names = "default"; |
| 201 | pinctrl-0 = <&pinctrl_usbotg0_id>; |
| 202 | srp-disable; |
| 203 | hnp-disable; |
| 204 | adp-disable; |
| 205 | status = "okay"; |
| 206 | }; |
| 207 | |
| 208 | &usbphy0 { |
| 209 | fsl,tx-d-cal = <88>; |
| 210 | }; |
| 211 | |
| 212 | &usbotg1 { |
| 213 | pinctrl-names = "default"; |
| 214 | pinctrl-0 = <&pinctrl_usbotg1_id>; |
| 215 | srp-disable; |
| 216 | hnp-disable; |
| 217 | adp-disable; |
| 218 | status = "okay"; |
| 219 | }; |
| 220 | |
| 221 | &usbphy1 { |
| 222 | fsl,tx-d-cal = <88>; |
| 223 | }; |