arm: imx: add i.MX8ULP EVK support
Add i.MX8ULP EVK basic support, support SD/I2C/ENET/LPUART
Log as below: I would keep some debug info for now, and after we move
to be stable and production launch, we could drop that.
U-Boot SPL 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800)
Normal Boot
upower_init: soc_id=48
upower_init: version:11.11.6
upower_init: start uPower RAM service
user_upwr_rdy_callb: soc=b
user_upwr_rdy_callb: RAM version:12.6
Turn on switches ok
Turn on memories ok
Clear DDR retention ok
Poll for freq_chg_req on SIM register and change to F1 frequency.
Poll for freq_chg_req on SIM register and change to F0 frequency.
Poll for freq_chg_req on SIM register and change to F1 frequency.
Poll for freq_chg_req on SIM register and change to F2 frequency.
Poll for freq_chg_req on SIM register and change to F1 frequency.
Poll for freq_chg_req on SIM register and change to F2 frequency.
complete
De-Skew PLL is locked and ready
WDT: Not found!
Trying to boot from BOOTROM
image offset 0x8000, pagesize 0x200, ivt offset 0x0
Load image from 0x3a800 by ROM_API
NOTICE: BL31: v2.4(release):imx_5.10.35_2.0.0_imx8ulp_er-10-gf37e59b94
NOTICE: BL31: Built : 01:56:58, Jun 29 2021
NOTICE: upower_init: start uPower RAM service
NOTICE: user_upwr_rdy_callb: soc=b
NOTICE: user_upwr_rdy_callb: RAM version:12.6
U-Boot 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800)
CPU: Freescale i.MX8ULP rev1.0 at 744 MHz
Reset cause: POR
Boot mode: Single boot
Model: FSL i.MX8ULP EVK
DRAM: 2 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 2
Loading Environment from MMC... ***
Warning - bad CRC, using default environment
In: serial@293a0000
Out: serial@293a0000
Err: serial@293a0000
Net:
Warning: ethernet@29950000 (eth0) using random MAC address -
96:35:88:62:e0:44
eth0: ethernet@29950000
Hit any key to stop autoboot: 0
Signed-off-by: Peng Fan <peng.fan@nxp.com>
diff --git a/arch/arm/dts/imx8ulp-evk.dts b/arch/arm/dts/imx8ulp-evk.dts
new file mode 100644
index 0000000..da09ff4
--- /dev/null
+++ b/arch/arm/dts/imx8ulp-evk.dts
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8ulp.dtsi"
+
+/ {
+ model = "FSL i.MX8ULP EVK";
+ compatible = "fsl,imx8ulp-evk", "fsl,imx8ulp";
+
+ chosen {
+ stdout-path = &lpuart5;
+ bootargs = "console=ttyLP1,115200 earlycon";
+ };
+
+ usdhc2_pwrseq: usdhc2_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pcal6408 2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&lpuart5 {
+ /* console */
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpuart5>;
+ pinctrl-1 = <&pinctrl_lpuart5>;
+ status = "okay";
+};
+
+&iomuxc1 {
+ pinctrl_lpuart5: lpuart5grp {
+ fsl,pins = <
+ MX8ULP_PAD_PTF14__LPUART5_TX 0x03
+ MX8ULP_PAD_PTF15__LPUART5_RX 0x03
+ >;
+ };
+
+ pinctrl_lpi2c7: lpi2c7grp {
+ fsl,pins = <
+ MX8ULP_PAD_PTE12__LPI2C7_SCL 0x27
+ MX8ULP_PAD_PTE13__LPI2C7_SDA 0x27
+ >;
+ };
+
+ pinctrl_usdhc0: usdhc0grp {
+ fsl,pins = <
+ MX8ULP_PAD_PTD0__SDHC0_RESET_B 0x43
+ MX8ULP_PAD_PTD1__SDHC0_CMD 0x43
+ MX8ULP_PAD_PTD2__SDHC0_CLK 0x10042
+ MX8ULP_PAD_PTD10__SDHC0_D0 0x43
+ MX8ULP_PAD_PTD9__SDHC0_D1 0x43
+ MX8ULP_PAD_PTD8__SDHC0_D2 0x43
+ MX8ULP_PAD_PTD7__SDHC0_D3 0x43
+ MX8ULP_PAD_PTD6__SDHC0_D4 0x43
+ MX8ULP_PAD_PTD5__SDHC0_D5 0x43
+ MX8ULP_PAD_PTD4__SDHC0_D6 0x43
+ MX8ULP_PAD_PTD3__SDHC0_D7 0x43
+ MX8ULP_PAD_PTD11__SDHC0_DQS 0x10042
+ >;
+ };
+
+ pinctrl_usdhc2_pte: usdhc2ptegrp {
+ fsl,pins = <
+ MX8ULP_PAD_PTE1__SDHC2_D0 0x43
+ MX8ULP_PAD_PTE0__SDHC2_D1 0x43
+ MX8ULP_PAD_PTE5__SDHC2_D2 0x43
+ MX8ULP_PAD_PTE4__SDHC2_D3 0x43
+ MX8ULP_PAD_PTE2__SDHC2_CLK 0x10042
+ MX8ULP_PAD_PTE3__SDHC2_CMD 0x43
+ MX8ULP_PAD_PTE7__PTE7 0x10003
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX8ULP_PAD_PTE14__ENET0_MDIO 0x43
+ MX8ULP_PAD_PTE15__ENET0_MDC 0x43
+ MX8ULP_PAD_PTE18__ENET0_CRS_DV 0x43
+ MX8ULP_PAD_PTE17__ENET0_RXER 0x43
+ MX8ULP_PAD_PTF1__ENET0_RXD0 0x43
+ MX8ULP_PAD_PTE20__ENET0_RXD1 0x43
+ MX8ULP_PAD_PTE16__ENET0_TXEN 0x43
+ MX8ULP_PAD_PTE23__ENET0_TXD0 0x43
+ MX8ULP_PAD_PTE22__ENET0_TXD1 0x43
+ MX8ULP_PAD_PTE19__ENET0_REFCLK 0x10043
+ MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x10043
+ >;
+ };
+
+ pinctrl_usbotg0_id: otg0idgrp {
+ fsl,pins = <
+ MX8ULP_PAD_PTF2__USB0_ID 0x10003
+ >;
+ };
+
+ pinctrl_usbotg1_id: otg1idgrp {
+ fsl,pins = <
+ MX8ULP_PAD_PTD23__USB1_ID 0x10003
+ >;
+ };
+};
+
+&usdhc0 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc0>;
+ pinctrl-1 = <&pinctrl_usdhc0>;
+ pinctrl-2 = <&pinctrl_usdhc0>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc2_pte>;
+ pinctrl-1 = <&pinctrl_usdhc2_pte>;
+ pinctrl-2 = <&pinctrl_usdhc2_pte>;
+ pinctrl-3 = <&pinctrl_usdhc2_pte>;
+ mmc-pwrseq = <&usdhc2_pwrseq>;
+ max-frequency = <100000000>;
+ bus-width = <4>;
+ keep-power-in-suspend;
+ non-removable;
+ wakeup-source;
+ status = "okay";
+
+ wifi_wake_host {
+ compatible = "nxp,wifi-wake-host";
+ interrupt-parent = <&gpioe>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "host-wake";
+ };
+};
+
+&lpi2c7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpi2c7>;
+ status = "okay";
+
+ pcal6408: gpio@21 {
+ compatible = "ti,tca6408";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&flexspi0 {
+ status = "okay";
+
+ flash0: atxp032@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <66000000>;
+ };
+};
+
+&flexspi2 {
+ status = "okay";
+
+ flash1: mt35xu512aba@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <29000000>;
+ spi-nor,ddr-quad-read-dummy = <8>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy>;
+ status = "okay";
+
+ phy-reset-gpios = <&pcal6408 4 GPIO_ACTIVE_LOW>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy@1 {
+ reg = <1>;
+ micrel,led-mode = <1>;
+ };
+ };
+};
+
+&usbotg0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg0_id>;
+ srp-disable;
+ hnp-disable;
+ adp-disable;
+ status = "okay";
+};
+
+&usbphy0 {
+ fsl,tx-d-cal = <88>;
+};
+
+&usbotg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1_id>;
+ srp-disable;
+ hnp-disable;
+ adp-disable;
+ status = "okay";
+};
+
+&usbphy1 {
+ fsl,tx-d-cal = <88>;
+};