Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: BSD-3-Clause |
| 2 | /* |
| 3 | * Lenovo Yoga C630 |
| 4 | * |
| 5 | * Copyright (c) 2019, Linaro Ltd. |
| 6 | */ |
| 7 | |
| 8 | /dts-v1/; |
| 9 | |
| 10 | #include <dt-bindings/input/gpio-keys.h> |
| 11 | #include <dt-bindings/input/input.h> |
| 12 | #include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| 13 | #include <dt-bindings/sound/qcom,q6afe.h> |
| 14 | #include <dt-bindings/sound/qcom,q6asm.h> |
| 15 | #include "sdm850.dtsi" |
| 16 | #include "sdm845-wcd9340.dtsi" |
| 17 | #include "pm8998.dtsi" |
| 18 | |
| 19 | /* |
| 20 | * Update following upstream (sdm845.dtsi) reserved |
| 21 | * memory mappings for firmware loading to succeed |
| 22 | * and enable the IPA device. |
| 23 | */ |
| 24 | /delete-node/ &ipa_fw_mem; |
| 25 | /delete-node/ &ipa_gsi_mem; |
| 26 | /delete-node/ &gpu_mem; |
| 27 | /delete-node/ &adsp_mem; |
| 28 | /delete-node/ &wlan_msa_mem; |
| 29 | |
| 30 | / { |
| 31 | model = "Lenovo Yoga C630"; |
| 32 | compatible = "lenovo,yoga-c630", "qcom,sdm845"; |
| 33 | chassis-type = "convertible"; |
| 34 | |
| 35 | aliases { |
| 36 | serial0 = &uart9; |
| 37 | serial1 = &uart6; |
| 38 | }; |
| 39 | |
| 40 | gpio-keys { |
| 41 | compatible = "gpio-keys"; |
| 42 | |
| 43 | pinctrl-names = "default"; |
| 44 | pinctrl-0 = <&lid_pin_active>, <&mode_pin_active>; |
| 45 | |
| 46 | switch-lid { |
| 47 | gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>; |
| 48 | linux,input-type = <EV_SW>; |
| 49 | linux,code = <SW_LID>; |
| 50 | wakeup-source; |
| 51 | wakeup-event-action = <EV_ACT_DEASSERTED>; |
| 52 | }; |
| 53 | |
| 54 | switch-mode { |
| 55 | gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; |
| 56 | linux,input-type = <EV_SW>; |
| 57 | linux,code = <SW_TABLET_MODE>; |
| 58 | }; |
| 59 | }; |
| 60 | |
| 61 | /* Reserved memory changes for IPA */ |
| 62 | reserved-memory { |
| 63 | wlan_msa_mem: memory@8c400000 { |
| 64 | reg = <0 0x8c400000 0 0x100000>; |
| 65 | no-map; |
| 66 | }; |
| 67 | |
| 68 | gpu_mem: memory@8c515000 { |
| 69 | reg = <0 0x8c515000 0 0x2000>; |
| 70 | no-map; |
| 71 | }; |
| 72 | |
| 73 | ipa_fw_mem: memory@8c517000 { |
| 74 | reg = <0 0x8c517000 0 0x5a000>; |
| 75 | no-map; |
| 76 | }; |
| 77 | |
| 78 | adsp_mem: memory@8c600000 { |
| 79 | reg = <0 0x8c600000 0 0x1a00000>; |
| 80 | no-map; |
| 81 | }; |
| 82 | }; |
| 83 | |
| 84 | sw_edp_1p2: edp-1p2-regulator { |
| 85 | compatible = "regulator-fixed"; |
| 86 | regulator-name = "sw_edp_1p2"; |
| 87 | |
| 88 | regulator-min-microvolt = <1200000>; |
| 89 | regulator-max-microvolt = <1200000>; |
| 90 | |
| 91 | pinctrl-0 = <&sw_edp_1p2_en>; |
| 92 | pinctrl-names = "default"; |
| 93 | |
| 94 | gpio = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>; |
| 95 | enable-active-high; |
| 96 | |
| 97 | vin-supply = <&vreg_l2a_1p2>; |
| 98 | }; |
| 99 | |
| 100 | sn65dsi86_refclk: sn65dsi86-refclk { |
| 101 | compatible = "fixed-clock"; |
| 102 | #clock-cells = <0>; |
| 103 | |
| 104 | clock-frequency = <19200000>; |
| 105 | }; |
| 106 | |
| 107 | vph_pwr: regulator-vph-pwr { |
| 108 | compatible = "regulator-fixed"; |
| 109 | regulator-name = "vph_pwr"; |
| 110 | regulator-min-microvolt = <3700000>; |
| 111 | regulator-max-microvolt = <3700000>; |
| 112 | }; |
| 113 | |
| 114 | vlcm_3v3: regulator-vlcm-3v3 { |
| 115 | compatible = "regulator-fixed"; |
| 116 | regulator-name = "vlcm_3v3"; |
| 117 | |
| 118 | vin-supply = <&vph_pwr>; |
| 119 | regulator-min-microvolt = <3300000>; |
| 120 | regulator-max-microvolt = <3300000>; |
| 121 | |
| 122 | gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>; |
| 123 | enable-active-high; |
| 124 | }; |
| 125 | |
| 126 | backlight: backlight { |
| 127 | compatible = "pwm-backlight"; |
| 128 | pwms = <&sn65dsi86 1000000>; |
| 129 | enable-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; |
| 130 | }; |
| 131 | }; |
| 132 | |
| 133 | &adsp_pas { |
| 134 | firmware-name = "qcom/sdm850/LENOVO/81JL/qcadsp850.mbn"; |
| 135 | status = "okay"; |
| 136 | }; |
| 137 | |
| 138 | &apps_rsc { |
| 139 | regulators-0 { |
| 140 | compatible = "qcom,pm8998-rpmh-regulators"; |
| 141 | qcom,pmic-id = "a"; |
| 142 | |
| 143 | vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; |
| 144 | vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; |
| 145 | |
| 146 | vreg_s2a_1p125: smps2 { |
| 147 | }; |
| 148 | |
| 149 | vreg_s3a_1p35: smps3 { |
| 150 | regulator-min-microvolt = <1352000>; |
| 151 | regulator-max-microvolt = <1352000>; |
| 152 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 153 | }; |
| 154 | |
| 155 | vreg_s4a_1p8: smps4 { |
| 156 | regulator-min-microvolt = <1800000>; |
| 157 | regulator-max-microvolt = <1800000>; |
| 158 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 159 | }; |
| 160 | |
| 161 | vreg_s5a_2p04: smps5 { |
| 162 | regulator-min-microvolt = <2040000>; |
| 163 | regulator-max-microvolt = <2040000>; |
| 164 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 165 | }; |
| 166 | |
| 167 | vreg_s7a_1p025: smps7 { |
| 168 | }; |
| 169 | |
| 170 | vdd_qusb_hs0: |
| 171 | vdda_hp_pcie_core: |
| 172 | vdda_mipi_csi0_0p9: |
| 173 | vdda_mipi_csi1_0p9: |
| 174 | vdda_mipi_csi2_0p9: |
| 175 | vdda_mipi_dsi0_pll: |
| 176 | vdda_mipi_dsi1_pll: |
| 177 | vdda_qlink_lv: |
| 178 | vdda_qlink_lv_ck: |
| 179 | vdda_qrefs_0p875: |
| 180 | vdda_pcie_core: |
| 181 | vdda_pll_cc_ebi01: |
| 182 | vdda_pll_cc_ebi23: |
| 183 | vdda_sp_sensor: |
| 184 | vdda_ufs1_core: |
| 185 | vdda_ufs2_core: |
| 186 | vdda_usb1_ss_core: |
| 187 | vdda_usb2_ss_core: |
| 188 | vreg_l1a_0p875: ldo1 { |
| 189 | regulator-min-microvolt = <880000>; |
| 190 | regulator-max-microvolt = <880000>; |
| 191 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 192 | }; |
| 193 | |
| 194 | vddpx_10: |
| 195 | vreg_l2a_1p2: ldo2 { |
| 196 | regulator-min-microvolt = <1200000>; |
| 197 | regulator-max-microvolt = <1200000>; |
| 198 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 199 | regulator-always-on; |
| 200 | }; |
| 201 | |
| 202 | vreg_l3a_1p0: ldo3 { |
| 203 | }; |
| 204 | |
| 205 | vdd_wcss_cx: |
| 206 | vdd_wcss_mx: |
| 207 | vdda_wcss_pll: |
| 208 | vreg_l5a_0p8: ldo5 { |
| 209 | regulator-min-microvolt = <800000>; |
| 210 | regulator-max-microvolt = <800000>; |
| 211 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 212 | }; |
| 213 | |
| 214 | vddpx_13: |
| 215 | vreg_l6a_1p8: ldo6 { |
| 216 | regulator-min-microvolt = <1800000>; |
| 217 | regulator-max-microvolt = <1800000>; |
| 218 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 219 | }; |
| 220 | |
| 221 | vreg_l7a_1p8: ldo7 { |
| 222 | regulator-min-microvolt = <1800000>; |
| 223 | regulator-max-microvolt = <1800000>; |
| 224 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 225 | }; |
| 226 | |
| 227 | vreg_l8a_1p2: ldo8 { |
| 228 | }; |
| 229 | |
| 230 | vreg_l9a_1p8: ldo9 { |
| 231 | }; |
| 232 | |
| 233 | vreg_l10a_1p8: ldo10 { |
| 234 | }; |
| 235 | |
| 236 | vreg_l11a_1p0: ldo11 { |
| 237 | }; |
| 238 | |
| 239 | vdd_qfprom: |
| 240 | vdd_qfprom_sp: |
| 241 | vdda_apc1_cs_1p8: |
| 242 | vdda_gfx_cs_1p8: |
| 243 | vdda_qrefs_1p8: |
| 244 | vdda_qusb_hs0_1p8: |
| 245 | vddpx_11: |
| 246 | vreg_l12a_1p8: ldo12 { |
| 247 | regulator-min-microvolt = <1800000>; |
| 248 | regulator-max-microvolt = <1800000>; |
| 249 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 250 | }; |
| 251 | |
| 252 | vddpx_2: |
| 253 | vreg_l13a_2p95: ldo13 { |
| 254 | }; |
| 255 | |
| 256 | vreg_l14a_1p88: ldo14 { |
| 257 | regulator-min-microvolt = <1880000>; |
| 258 | regulator-max-microvolt = <1880000>; |
| 259 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 260 | regulator-always-on; |
| 261 | }; |
| 262 | |
| 263 | vreg_l15a_1p8: ldo15 { |
| 264 | }; |
| 265 | |
| 266 | vreg_l16a_2p7: ldo16 { |
| 267 | }; |
| 268 | |
| 269 | vreg_l17a_1p3: ldo17 { |
| 270 | regulator-min-microvolt = <1304000>; |
| 271 | regulator-max-microvolt = <1304000>; |
| 272 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 273 | }; |
| 274 | |
| 275 | vreg_l18a_2p7: ldo18 { |
| 276 | }; |
| 277 | |
| 278 | vreg_l19a_3p0: ldo19 { |
| 279 | regulator-min-microvolt = <3100000>; |
| 280 | regulator-max-microvolt = <3108000>; |
| 281 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 282 | }; |
| 283 | |
| 284 | vreg_l20a_2p95: ldo20 { |
| 285 | regulator-min-microvolt = <2960000>; |
| 286 | regulator-max-microvolt = <2960000>; |
| 287 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 288 | }; |
| 289 | |
| 290 | vreg_l21a_2p95: ldo21 { |
| 291 | }; |
| 292 | |
| 293 | vreg_l22a_2p85: ldo22 { |
| 294 | }; |
| 295 | |
| 296 | vreg_l23a_3p3: ldo23 { |
| 297 | regulator-min-microvolt = <3300000>; |
| 298 | regulator-max-microvolt = <3312000>; |
| 299 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 300 | }; |
| 301 | |
| 302 | vdda_qusb_hs0_3p1: |
| 303 | vreg_l24a_3p075: ldo24 { |
| 304 | regulator-min-microvolt = <3075000>; |
| 305 | regulator-max-microvolt = <3083000>; |
| 306 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 307 | }; |
| 308 | |
| 309 | vreg_l25a_3p3: ldo25 { |
| 310 | regulator-min-microvolt = <3104000>; |
| 311 | regulator-max-microvolt = <3112000>; |
| 312 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 313 | }; |
| 314 | |
| 315 | vdda_hp_pcie_1p2: |
| 316 | vdda_hv_ebi0: |
| 317 | vdda_hv_ebi1: |
| 318 | vdda_hv_ebi2: |
| 319 | vdda_hv_ebi3: |
| 320 | vdda_mipi_csi_1p25: |
| 321 | vdda_mipi_dsi0_1p2: |
| 322 | vdda_mipi_dsi1_1p2: |
| 323 | vdda_pcie_1p2: |
| 324 | vdda_ufs1_1p2: |
| 325 | vdda_ufs2_1p2: |
| 326 | vdda_usb1_ss_1p2: |
| 327 | vdda_usb2_ss_1p2: |
| 328 | vreg_l26a_1p2: ldo26 { |
| 329 | regulator-min-microvolt = <1200000>; |
| 330 | regulator-max-microvolt = <1208000>; |
| 331 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 332 | }; |
| 333 | |
| 334 | vreg_l28a_3p0: ldo28 { |
| 335 | }; |
| 336 | |
| 337 | vreg_lvs1a_1p8: lvs1 { |
| 338 | }; |
| 339 | |
| 340 | vreg_lvs2a_1p8: lvs2 { |
| 341 | }; |
| 342 | }; |
| 343 | }; |
| 344 | |
| 345 | &cdsp_pas { |
| 346 | firmware-name = "qcom/sdm850/LENOVO/81JL/qccdsp850.mbn"; |
| 347 | status = "okay"; |
| 348 | }; |
| 349 | |
| 350 | &gcc { |
| 351 | protected-clocks = <GCC_QSPI_CORE_CLK>, |
| 352 | <GCC_QSPI_CORE_CLK_SRC>, |
| 353 | <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, |
| 354 | <GCC_LPASS_Q6_AXI_CLK>, |
| 355 | <GCC_LPASS_SWAY_CLK>; |
| 356 | }; |
| 357 | |
| 358 | &gmu { |
| 359 | status = "okay"; |
| 360 | }; |
| 361 | |
| 362 | &gpu { |
| 363 | status = "okay"; |
| 364 | zap-shader { |
| 365 | memory-region = <&gpu_mem>; |
| 366 | firmware-name = "qcom/sdm850/LENOVO/81JL/qcdxkmsuc850.mbn"; |
| 367 | }; |
| 368 | }; |
| 369 | |
| 370 | &i2c1 { |
| 371 | status = "okay"; |
| 372 | clock-frequency = <400000>; |
| 373 | }; |
| 374 | |
| 375 | &i2c3 { |
| 376 | status = "okay"; |
| 377 | clock-frequency = <400000>; |
| 378 | /* Overwrite pinctrl-0 from sdm845.dtsi */ |
| 379 | pinctrl-0 = <&qup_i2c3_default &i2c3_hid_active>; |
| 380 | |
| 381 | tsel: hid@15 { |
| 382 | compatible = "hid-over-i2c"; |
| 383 | reg = <0x15>; |
| 384 | hid-descr-addr = <0x1>; |
| 385 | |
| 386 | interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>; |
| 387 | }; |
| 388 | |
| 389 | tsc2: hid@2c { |
| 390 | compatible = "hid-over-i2c"; |
| 391 | reg = <0x2c>; |
| 392 | hid-descr-addr = <0x20>; |
| 393 | |
| 394 | interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>; |
Tom Rini | 93743d2 | 2024-04-01 09:08:13 -0400 | [diff] [blame] | 395 | |
| 396 | wakeup-source; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 397 | }; |
| 398 | }; |
| 399 | |
| 400 | &i2c5 { |
| 401 | status = "okay"; |
| 402 | clock-frequency = <400000>; |
| 403 | |
| 404 | tsc1: hid@10 { |
| 405 | compatible = "hid-over-i2c"; |
| 406 | reg = <0x10>; |
| 407 | hid-descr-addr = <0x1>; |
| 408 | |
| 409 | interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>; |
| 410 | |
| 411 | pinctrl-names = "default"; |
| 412 | pinctrl-0 = <&i2c5_hid_active>; |
Tom Rini | 93743d2 | 2024-04-01 09:08:13 -0400 | [diff] [blame] | 413 | |
| 414 | wakeup-source; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 415 | }; |
| 416 | }; |
| 417 | |
| 418 | &i2c10 { |
| 419 | status = "okay"; |
| 420 | clock-frequency = <400000>; |
| 421 | |
| 422 | sn65dsi86: bridge@2c { |
| 423 | compatible = "ti,sn65dsi86"; |
| 424 | reg = <0x2c>; |
| 425 | pinctrl-names = "default"; |
| 426 | pinctrl-0 = <&sn65dsi86_pin_active>; |
| 427 | |
| 428 | enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; |
| 429 | |
| 430 | vcca-supply = <&sw_edp_1p2>; |
| 431 | vcc-supply = <&sw_edp_1p2>; |
| 432 | vpll-supply = <&vreg_l14a_1p88>; |
| 433 | vccio-supply = <&vreg_l14a_1p88>; |
| 434 | |
| 435 | clocks = <&sn65dsi86_refclk>; |
| 436 | clock-names = "refclk"; |
| 437 | |
| 438 | no-hpd; |
| 439 | #pwm-cells = <1>; |
| 440 | |
| 441 | ports { |
| 442 | #address-cells = <1>; |
| 443 | #size-cells = <0>; |
| 444 | |
| 445 | port@0 { |
| 446 | reg = <0>; |
| 447 | sn65dsi86_in_a: endpoint { |
| 448 | remote-endpoint = <&mdss_dsi0_out>; |
| 449 | }; |
| 450 | }; |
| 451 | |
| 452 | port@1 { |
| 453 | reg = <1>; |
| 454 | sn65dsi86_out: endpoint { |
| 455 | remote-endpoint = <&panel_in_edp>; |
| 456 | }; |
| 457 | }; |
| 458 | }; |
| 459 | |
| 460 | aux-bus { |
| 461 | panel: panel { |
| 462 | compatible = "boe,nv133fhm-n61"; |
| 463 | backlight = <&backlight>; |
| 464 | power-supply = <&vlcm_3v3>; |
| 465 | |
| 466 | port { |
| 467 | panel_in_edp: endpoint { |
| 468 | remote-endpoint = <&sn65dsi86_out>; |
| 469 | }; |
| 470 | }; |
| 471 | }; |
| 472 | }; |
| 473 | }; |
| 474 | }; |
| 475 | |
| 476 | &i2c11 { |
| 477 | status = "okay"; |
| 478 | clock-frequency = <400000>; |
| 479 | |
| 480 | ecsh: hid@5c { |
| 481 | compatible = "hid-over-i2c"; |
| 482 | reg = <0x5c>; |
| 483 | hid-descr-addr = <0x1>; |
| 484 | |
| 485 | interrupts-extended = <&tlmm 92 IRQ_TYPE_LEVEL_LOW>; |
| 486 | |
| 487 | pinctrl-names = "default"; |
| 488 | pinctrl-0 = <&i2c11_hid_active>; |
Tom Rini | 93743d2 | 2024-04-01 09:08:13 -0400 | [diff] [blame] | 489 | |
| 490 | wakeup-source; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 491 | }; |
| 492 | }; |
| 493 | |
| 494 | &ipa { |
| 495 | qcom,gsi-loader = "self"; |
| 496 | memory-region = <&ipa_fw_mem>; |
| 497 | status = "okay"; |
| 498 | }; |
| 499 | |
| 500 | &mdss { |
| 501 | status = "okay"; |
| 502 | }; |
| 503 | |
| 504 | &mdss_dsi0 { |
| 505 | status = "okay"; |
| 506 | vdda-supply = <&vreg_l26a_1p2>; |
| 507 | |
| 508 | ports { |
| 509 | port@1 { |
| 510 | endpoint { |
| 511 | remote-endpoint = <&sn65dsi86_in_a>; |
| 512 | data-lanes = <0 1 2 3>; |
| 513 | }; |
| 514 | }; |
| 515 | }; |
| 516 | }; |
| 517 | |
| 518 | &mdss_dsi0_phy { |
| 519 | status = "okay"; |
| 520 | vdds-supply = <&vreg_l1a_0p875>; |
| 521 | }; |
| 522 | |
| 523 | &mss_pil { |
| 524 | status = "okay"; |
| 525 | firmware-name = "qcom/sdm850/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/sdm850/LENOVO/81JL/qcdsp2850.mbn"; |
| 526 | }; |
| 527 | |
| 528 | &pm8998_gpios { |
| 529 | /* This pin is pulled down by a fixed resistor */ |
| 530 | sw_edp_1p2_en: pm8998-gpio9-state { |
| 531 | pins = "gpio9"; |
| 532 | function = "normal"; |
| 533 | bias-disable; |
| 534 | qcom,drive-strength = <0>; |
| 535 | }; |
| 536 | }; |
| 537 | |
| 538 | &qup_i2c10_default { |
| 539 | drive-strength = <2>; |
| 540 | bias-disable; |
| 541 | }; |
| 542 | |
| 543 | &qup_i2c12_default { |
| 544 | drive-strength = <2>; |
| 545 | bias-disable; |
| 546 | }; |
| 547 | |
| 548 | &qupv3_id_0 { |
| 549 | status = "okay"; |
| 550 | }; |
| 551 | |
| 552 | &qupv3_id_1 { |
| 553 | status = "okay"; |
| 554 | }; |
| 555 | |
| 556 | &q6asmdai { |
| 557 | dai@0 { |
| 558 | reg = <0>; |
| 559 | }; |
| 560 | |
| 561 | dai@1 { |
| 562 | reg = <1>; |
| 563 | }; |
| 564 | |
| 565 | dai@2 { |
| 566 | reg = <2>; |
| 567 | }; |
| 568 | }; |
| 569 | |
| 570 | &sound { |
| 571 | compatible = "lenovo,yoga-c630-sndcard", "qcom,sdm845-sndcard"; |
| 572 | model = "Lenovo-YOGA-C630-13Q50"; |
| 573 | |
| 574 | audio-routing = |
| 575 | "RX_BIAS", "MCLK", |
| 576 | "AMIC2", "MIC BIAS2", |
| 577 | "SpkrLeft IN", "SPK1 OUT", |
| 578 | "SpkrRight IN", "SPK2 OUT", |
| 579 | "MM_DL1", "MultiMedia1 Playback", |
| 580 | "MM_DL3", "MultiMedia3 Playback", |
| 581 | "MultiMedia2 Capture", "MM_UL2"; |
| 582 | |
| 583 | mm1-dai-link { |
| 584 | link-name = "MultiMedia1"; |
| 585 | cpu { |
| 586 | sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; |
| 587 | }; |
| 588 | }; |
| 589 | |
| 590 | mm2-dai-link { |
| 591 | link-name = "MultiMedia2"; |
| 592 | cpu { |
| 593 | sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; |
| 594 | }; |
| 595 | }; |
| 596 | |
| 597 | mm3-dai-link { |
| 598 | link-name = "MultiMedia3"; |
| 599 | cpu { |
| 600 | sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; |
| 601 | }; |
| 602 | }; |
| 603 | |
| 604 | slim-dai-link { |
| 605 | link-name = "SLIM Playback"; |
| 606 | cpu { |
| 607 | sound-dai = <&q6afedai SLIMBUS_0_RX>; |
| 608 | }; |
| 609 | |
| 610 | platform { |
| 611 | sound-dai = <&q6routing>; |
| 612 | }; |
| 613 | |
| 614 | codec { |
| 615 | sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; |
| 616 | }; |
| 617 | }; |
| 618 | |
| 619 | slimcap-dai-link { |
| 620 | link-name = "SLIM Capture"; |
| 621 | cpu { |
| 622 | sound-dai = <&q6afedai SLIMBUS_0_TX>; |
| 623 | }; |
| 624 | |
| 625 | platform { |
| 626 | sound-dai = <&q6routing>; |
| 627 | }; |
| 628 | |
| 629 | codec { |
| 630 | sound-dai = <&wcd9340 1>; |
| 631 | }; |
| 632 | }; |
| 633 | |
| 634 | slim-wcd-dai-link { |
| 635 | link-name = "SLIM WCD Playback"; |
| 636 | cpu { |
| 637 | sound-dai = <&q6afedai SLIMBUS_1_RX>; |
| 638 | }; |
| 639 | |
| 640 | platform { |
| 641 | sound-dai = <&q6routing>; |
| 642 | }; |
| 643 | |
| 644 | codec { |
| 645 | sound-dai = <&wcd9340 2>; |
| 646 | }; |
| 647 | }; |
| 648 | }; |
| 649 | |
| 650 | &tlmm { |
| 651 | gpio-reserved-ranges = <0 4>, <81 4>; |
| 652 | |
| 653 | sn65dsi86_pin_active: sn65dsi86-enable-state { |
| 654 | pins = "gpio96"; |
| 655 | function = "gpio"; |
| 656 | drive-strength = <2>; |
| 657 | bias-disable; |
| 658 | }; |
| 659 | |
| 660 | i2c3_hid_active: i2c2-hid-active-state { |
| 661 | pins = "gpio37"; |
| 662 | function = "gpio"; |
| 663 | |
| 664 | bias-pull-up; |
| 665 | drive-strength = <2>; |
| 666 | }; |
| 667 | |
| 668 | i2c5_hid_active: i2c5-hid-active-state { |
| 669 | pins = "gpio125"; |
| 670 | function = "gpio"; |
| 671 | |
| 672 | bias-pull-up; |
| 673 | drive-strength = <2>; |
| 674 | }; |
| 675 | |
| 676 | i2c11_hid_active: i2c11-hid-active-state { |
| 677 | pins = "gpio92"; |
| 678 | function = "gpio"; |
| 679 | |
| 680 | bias-pull-up; |
| 681 | drive-strength = <2>; |
| 682 | }; |
| 683 | |
| 684 | lid_pin_active: lid-pin-state { |
| 685 | pins = "gpio124"; |
| 686 | function = "gpio"; |
| 687 | |
| 688 | bias-disable; |
| 689 | }; |
| 690 | |
| 691 | mode_pin_active: mode-pin-state { |
| 692 | pins = "gpio95"; |
| 693 | function = "gpio"; |
| 694 | |
| 695 | bias-disable; |
| 696 | }; |
| 697 | }; |
| 698 | |
| 699 | &uart6 { |
| 700 | pinctrl-names = "default"; |
| 701 | pinctrl-0 = <&qup_uart6_4pin>; |
| 702 | status = "okay"; |
| 703 | |
| 704 | bluetooth { |
| 705 | compatible = "qcom,wcn3990-bt"; |
| 706 | |
| 707 | vddio-supply = <&vreg_s4a_1p8>; |
| 708 | vddxo-supply = <&vreg_l7a_1p8>; |
| 709 | vddrf-supply = <&vreg_l17a_1p3>; |
| 710 | vddch0-supply = <&vreg_l25a_3p3>; |
| 711 | vddch1-supply = <&vreg_l23a_3p3>; |
| 712 | max-speed = <3200000>; |
| 713 | }; |
| 714 | }; |
| 715 | |
| 716 | &uart9 { |
| 717 | status = "okay"; |
| 718 | }; |
| 719 | |
| 720 | &ufs_mem_hc { |
| 721 | status = "okay"; |
| 722 | |
| 723 | reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; |
| 724 | |
| 725 | vcc-supply = <&vreg_l20a_2p95>; |
| 726 | vcc-max-microamp = <600000>; |
| 727 | }; |
| 728 | |
| 729 | &ufs_mem_phy { |
| 730 | status = "okay"; |
| 731 | |
| 732 | vdda-phy-supply = <&vdda_ufs1_core>; |
| 733 | vdda-pll-supply = <&vdda_ufs1_1p2>; |
| 734 | }; |
| 735 | |
| 736 | &usb_1 { |
| 737 | status = "okay"; |
| 738 | }; |
| 739 | |
| 740 | &usb_1_dwc3 { |
| 741 | dr_mode = "host"; |
| 742 | }; |
| 743 | |
| 744 | &usb_1_hsphy { |
| 745 | status = "okay"; |
| 746 | |
| 747 | vdd-supply = <&vdda_usb1_ss_core>; |
| 748 | vdda-pll-supply = <&vdda_qusb_hs0_1p8>; |
| 749 | vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; |
| 750 | |
| 751 | qcom,imp-res-offset-value = <8>; |
| 752 | qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; |
| 753 | qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; |
| 754 | qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; |
| 755 | }; |
| 756 | |
| 757 | &usb_1_qmpphy { |
| 758 | status = "okay"; |
| 759 | |
| 760 | vdda-phy-supply = <&vdda_usb1_ss_1p2>; |
| 761 | vdda-pll-supply = <&vdda_usb1_ss_core>; |
| 762 | }; |
| 763 | |
| 764 | &usb_2 { |
| 765 | status = "okay"; |
| 766 | }; |
| 767 | |
| 768 | &usb_2_dwc3 { |
| 769 | dr_mode = "host"; |
| 770 | }; |
| 771 | |
| 772 | &usb_2_hsphy { |
| 773 | status = "okay"; |
| 774 | |
| 775 | vdd-supply = <&vdda_usb2_ss_core>; |
| 776 | vdda-pll-supply = <&vdda_qusb_hs0_1p8>; |
| 777 | vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; |
| 778 | |
| 779 | qcom,imp-res-offset-value = <8>; |
| 780 | qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; |
| 781 | }; |
| 782 | |
| 783 | &usb_2_qmpphy { |
| 784 | status = "okay"; |
| 785 | |
| 786 | vdda-phy-supply = <&vdda_usb2_ss_1p2>; |
| 787 | vdda-pll-supply = <&vdda_usb2_ss_core>; |
| 788 | }; |
| 789 | |
| 790 | &venus { |
| 791 | firmware-name = "qcom/sdm850/LENOVO/81JL/qcvss850.mbn"; |
| 792 | status = "okay"; |
| 793 | }; |
| 794 | |
| 795 | &wcd9340 { |
| 796 | reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; |
| 797 | vdd-buck-supply = <&vreg_s4a_1p8>; |
| 798 | vdd-buck-sido-supply = <&vreg_s4a_1p8>; |
| 799 | vdd-tx-supply = <&vreg_s4a_1p8>; |
| 800 | vdd-rx-supply = <&vreg_s4a_1p8>; |
| 801 | vdd-io-supply = <&vreg_s4a_1p8>; |
| 802 | qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; |
| 803 | qcom,mbhc-headset-vthreshold-microvolt = <1700000>; |
| 804 | qcom,mbhc-headphone-vthreshold-microvolt = <50000>; |
| 805 | |
Tom Rini | 93743d2 | 2024-04-01 09:08:13 -0400 | [diff] [blame] | 806 | swm: soundwire@c85 { |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 807 | left_spkr: speaker@0,3 { |
| 808 | compatible = "sdw10217211000"; |
| 809 | reg = <0 3>; |
| 810 | powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>; |
| 811 | #thermal-sensor-cells = <0>; |
| 812 | sound-name-prefix = "SpkrLeft"; |
| 813 | #sound-dai-cells = <0>; |
| 814 | }; |
| 815 | |
| 816 | right_spkr: speaker@0,4 { |
| 817 | compatible = "sdw10217211000"; |
| 818 | powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>; |
| 819 | reg = <0 4>; |
| 820 | #thermal-sensor-cells = <0>; |
| 821 | sound-name-prefix = "SpkrRight"; |
| 822 | #sound-dai-cells = <0>; |
| 823 | }; |
| 824 | }; |
| 825 | }; |
| 826 | |
| 827 | &wifi { |
| 828 | status = "okay"; |
| 829 | |
| 830 | vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; |
| 831 | vdd-1.8-xo-supply = <&vreg_l7a_1p8>; |
| 832 | vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; |
| 833 | vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; |
| 834 | vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; |
| 835 | |
| 836 | qcom,snoc-host-cap-8bit-quirk; |
| 837 | }; |
| 838 | |
| 839 | &crypto { |
| 840 | /* FIXME: qce_start triggers an SError */ |
| 841 | status = "disabled"; |
| 842 | }; |