blob: 47dc42f6e936cd9999a5e1f15890ba25da945e79 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -05001// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Lenovo Yoga C630
4 *
5 * Copyright (c) 2019, Linaro Ltd.
6 */
7
8/dts-v1/;
9
10#include <dt-bindings/input/gpio-keys.h>
11#include <dt-bindings/input/input.h>
12#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
13#include <dt-bindings/sound/qcom,q6afe.h>
14#include <dt-bindings/sound/qcom,q6asm.h>
15#include "sdm850.dtsi"
16#include "sdm845-wcd9340.dtsi"
17#include "pm8998.dtsi"
18
19/*
20 * Update following upstream (sdm845.dtsi) reserved
21 * memory mappings for firmware loading to succeed
22 * and enable the IPA device.
23 */
24/delete-node/ &ipa_fw_mem;
25/delete-node/ &ipa_gsi_mem;
26/delete-node/ &gpu_mem;
27/delete-node/ &adsp_mem;
28/delete-node/ &wlan_msa_mem;
29
30/ {
31 model = "Lenovo Yoga C630";
32 compatible = "lenovo,yoga-c630", "qcom,sdm845";
33 chassis-type = "convertible";
34
35 aliases {
36 serial0 = &uart9;
37 serial1 = &uart6;
38 };
39
40 gpio-keys {
41 compatible = "gpio-keys";
42
43 pinctrl-names = "default";
44 pinctrl-0 = <&lid_pin_active>, <&mode_pin_active>;
45
46 switch-lid {
47 gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
48 linux,input-type = <EV_SW>;
49 linux,code = <SW_LID>;
50 wakeup-source;
51 wakeup-event-action = <EV_ACT_DEASSERTED>;
52 };
53
54 switch-mode {
55 gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
56 linux,input-type = <EV_SW>;
57 linux,code = <SW_TABLET_MODE>;
58 };
59 };
60
61 /* Reserved memory changes for IPA */
62 reserved-memory {
63 wlan_msa_mem: memory@8c400000 {
64 reg = <0 0x8c400000 0 0x100000>;
65 no-map;
66 };
67
68 gpu_mem: memory@8c515000 {
69 reg = <0 0x8c515000 0 0x2000>;
70 no-map;
71 };
72
73 ipa_fw_mem: memory@8c517000 {
74 reg = <0 0x8c517000 0 0x5a000>;
75 no-map;
76 };
77
78 adsp_mem: memory@8c600000 {
79 reg = <0 0x8c600000 0 0x1a00000>;
80 no-map;
81 };
82 };
83
84 sw_edp_1p2: edp-1p2-regulator {
85 compatible = "regulator-fixed";
86 regulator-name = "sw_edp_1p2";
87
88 regulator-min-microvolt = <1200000>;
89 regulator-max-microvolt = <1200000>;
90
91 pinctrl-0 = <&sw_edp_1p2_en>;
92 pinctrl-names = "default";
93
94 gpio = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>;
95 enable-active-high;
96
97 vin-supply = <&vreg_l2a_1p2>;
98 };
99
100 sn65dsi86_refclk: sn65dsi86-refclk {
101 compatible = "fixed-clock";
102 #clock-cells = <0>;
103
104 clock-frequency = <19200000>;
105 };
106
107 vph_pwr: regulator-vph-pwr {
108 compatible = "regulator-fixed";
109 regulator-name = "vph_pwr";
110 regulator-min-microvolt = <3700000>;
111 regulator-max-microvolt = <3700000>;
112 };
113
114 vlcm_3v3: regulator-vlcm-3v3 {
115 compatible = "regulator-fixed";
116 regulator-name = "vlcm_3v3";
117
118 vin-supply = <&vph_pwr>;
119 regulator-min-microvolt = <3300000>;
120 regulator-max-microvolt = <3300000>;
121
122 gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
123 enable-active-high;
124 };
125
126 backlight: backlight {
127 compatible = "pwm-backlight";
128 pwms = <&sn65dsi86 1000000>;
129 enable-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
130 };
131};
132
133&adsp_pas {
134 firmware-name = "qcom/sdm850/LENOVO/81JL/qcadsp850.mbn";
135 status = "okay";
136};
137
138&apps_rsc {
139 regulators-0 {
140 compatible = "qcom,pm8998-rpmh-regulators";
141 qcom,pmic-id = "a";
142
143 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
144 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
145
146 vreg_s2a_1p125: smps2 {
147 };
148
149 vreg_s3a_1p35: smps3 {
150 regulator-min-microvolt = <1352000>;
151 regulator-max-microvolt = <1352000>;
152 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
153 };
154
155 vreg_s4a_1p8: smps4 {
156 regulator-min-microvolt = <1800000>;
157 regulator-max-microvolt = <1800000>;
158 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
159 };
160
161 vreg_s5a_2p04: smps5 {
162 regulator-min-microvolt = <2040000>;
163 regulator-max-microvolt = <2040000>;
164 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
165 };
166
167 vreg_s7a_1p025: smps7 {
168 };
169
170 vdd_qusb_hs0:
171 vdda_hp_pcie_core:
172 vdda_mipi_csi0_0p9:
173 vdda_mipi_csi1_0p9:
174 vdda_mipi_csi2_0p9:
175 vdda_mipi_dsi0_pll:
176 vdda_mipi_dsi1_pll:
177 vdda_qlink_lv:
178 vdda_qlink_lv_ck:
179 vdda_qrefs_0p875:
180 vdda_pcie_core:
181 vdda_pll_cc_ebi01:
182 vdda_pll_cc_ebi23:
183 vdda_sp_sensor:
184 vdda_ufs1_core:
185 vdda_ufs2_core:
186 vdda_usb1_ss_core:
187 vdda_usb2_ss_core:
188 vreg_l1a_0p875: ldo1 {
189 regulator-min-microvolt = <880000>;
190 regulator-max-microvolt = <880000>;
191 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
192 };
193
194 vddpx_10:
195 vreg_l2a_1p2: ldo2 {
196 regulator-min-microvolt = <1200000>;
197 regulator-max-microvolt = <1200000>;
198 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
199 regulator-always-on;
200 };
201
202 vreg_l3a_1p0: ldo3 {
203 };
204
205 vdd_wcss_cx:
206 vdd_wcss_mx:
207 vdda_wcss_pll:
208 vreg_l5a_0p8: ldo5 {
209 regulator-min-microvolt = <800000>;
210 regulator-max-microvolt = <800000>;
211 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
212 };
213
214 vddpx_13:
215 vreg_l6a_1p8: ldo6 {
216 regulator-min-microvolt = <1800000>;
217 regulator-max-microvolt = <1800000>;
218 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
219 };
220
221 vreg_l7a_1p8: ldo7 {
222 regulator-min-microvolt = <1800000>;
223 regulator-max-microvolt = <1800000>;
224 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
225 };
226
227 vreg_l8a_1p2: ldo8 {
228 };
229
230 vreg_l9a_1p8: ldo9 {
231 };
232
233 vreg_l10a_1p8: ldo10 {
234 };
235
236 vreg_l11a_1p0: ldo11 {
237 };
238
239 vdd_qfprom:
240 vdd_qfprom_sp:
241 vdda_apc1_cs_1p8:
242 vdda_gfx_cs_1p8:
243 vdda_qrefs_1p8:
244 vdda_qusb_hs0_1p8:
245 vddpx_11:
246 vreg_l12a_1p8: ldo12 {
247 regulator-min-microvolt = <1800000>;
248 regulator-max-microvolt = <1800000>;
249 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
250 };
251
252 vddpx_2:
253 vreg_l13a_2p95: ldo13 {
254 };
255
256 vreg_l14a_1p88: ldo14 {
257 regulator-min-microvolt = <1880000>;
258 regulator-max-microvolt = <1880000>;
259 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
260 regulator-always-on;
261 };
262
263 vreg_l15a_1p8: ldo15 {
264 };
265
266 vreg_l16a_2p7: ldo16 {
267 };
268
269 vreg_l17a_1p3: ldo17 {
270 regulator-min-microvolt = <1304000>;
271 regulator-max-microvolt = <1304000>;
272 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
273 };
274
275 vreg_l18a_2p7: ldo18 {
276 };
277
278 vreg_l19a_3p0: ldo19 {
279 regulator-min-microvolt = <3100000>;
280 regulator-max-microvolt = <3108000>;
281 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
282 };
283
284 vreg_l20a_2p95: ldo20 {
285 regulator-min-microvolt = <2960000>;
286 regulator-max-microvolt = <2960000>;
287 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
288 };
289
290 vreg_l21a_2p95: ldo21 {
291 };
292
293 vreg_l22a_2p85: ldo22 {
294 };
295
296 vreg_l23a_3p3: ldo23 {
297 regulator-min-microvolt = <3300000>;
298 regulator-max-microvolt = <3312000>;
299 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
300 };
301
302 vdda_qusb_hs0_3p1:
303 vreg_l24a_3p075: ldo24 {
304 regulator-min-microvolt = <3075000>;
305 regulator-max-microvolt = <3083000>;
306 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
307 };
308
309 vreg_l25a_3p3: ldo25 {
310 regulator-min-microvolt = <3104000>;
311 regulator-max-microvolt = <3112000>;
312 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
313 };
314
315 vdda_hp_pcie_1p2:
316 vdda_hv_ebi0:
317 vdda_hv_ebi1:
318 vdda_hv_ebi2:
319 vdda_hv_ebi3:
320 vdda_mipi_csi_1p25:
321 vdda_mipi_dsi0_1p2:
322 vdda_mipi_dsi1_1p2:
323 vdda_pcie_1p2:
324 vdda_ufs1_1p2:
325 vdda_ufs2_1p2:
326 vdda_usb1_ss_1p2:
327 vdda_usb2_ss_1p2:
328 vreg_l26a_1p2: ldo26 {
329 regulator-min-microvolt = <1200000>;
330 regulator-max-microvolt = <1208000>;
331 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
332 };
333
334 vreg_l28a_3p0: ldo28 {
335 };
336
337 vreg_lvs1a_1p8: lvs1 {
338 };
339
340 vreg_lvs2a_1p8: lvs2 {
341 };
342 };
343};
344
345&cdsp_pas {
346 firmware-name = "qcom/sdm850/LENOVO/81JL/qccdsp850.mbn";
347 status = "okay";
348};
349
350&gcc {
351 protected-clocks = <GCC_QSPI_CORE_CLK>,
352 <GCC_QSPI_CORE_CLK_SRC>,
353 <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
354 <GCC_LPASS_Q6_AXI_CLK>,
355 <GCC_LPASS_SWAY_CLK>;
356};
357
358&gmu {
359 status = "okay";
360};
361
362&gpu {
363 status = "okay";
364 zap-shader {
365 memory-region = <&gpu_mem>;
366 firmware-name = "qcom/sdm850/LENOVO/81JL/qcdxkmsuc850.mbn";
367 };
368};
369
370&i2c1 {
371 status = "okay";
372 clock-frequency = <400000>;
373};
374
375&i2c3 {
376 status = "okay";
377 clock-frequency = <400000>;
378 /* Overwrite pinctrl-0 from sdm845.dtsi */
379 pinctrl-0 = <&qup_i2c3_default &i2c3_hid_active>;
380
381 tsel: hid@15 {
382 compatible = "hid-over-i2c";
383 reg = <0x15>;
384 hid-descr-addr = <0x1>;
385
386 interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
387 };
388
389 tsc2: hid@2c {
390 compatible = "hid-over-i2c";
391 reg = <0x2c>;
392 hid-descr-addr = <0x20>;
393
394 interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
Tom Rini93743d22024-04-01 09:08:13 -0400395
396 wakeup-source;
Tom Rini53633a82024-02-29 12:33:36 -0500397 };
398};
399
400&i2c5 {
401 status = "okay";
402 clock-frequency = <400000>;
403
404 tsc1: hid@10 {
405 compatible = "hid-over-i2c";
406 reg = <0x10>;
407 hid-descr-addr = <0x1>;
408
409 interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>;
410
411 pinctrl-names = "default";
412 pinctrl-0 = <&i2c5_hid_active>;
Tom Rini93743d22024-04-01 09:08:13 -0400413
414 wakeup-source;
Tom Rini53633a82024-02-29 12:33:36 -0500415 };
416};
417
418&i2c10 {
419 status = "okay";
420 clock-frequency = <400000>;
421
422 sn65dsi86: bridge@2c {
423 compatible = "ti,sn65dsi86";
424 reg = <0x2c>;
425 pinctrl-names = "default";
426 pinctrl-0 = <&sn65dsi86_pin_active>;
427
428 enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
429
430 vcca-supply = <&sw_edp_1p2>;
431 vcc-supply = <&sw_edp_1p2>;
432 vpll-supply = <&vreg_l14a_1p88>;
433 vccio-supply = <&vreg_l14a_1p88>;
434
435 clocks = <&sn65dsi86_refclk>;
436 clock-names = "refclk";
437
438 no-hpd;
439 #pwm-cells = <1>;
440
441 ports {
442 #address-cells = <1>;
443 #size-cells = <0>;
444
445 port@0 {
446 reg = <0>;
447 sn65dsi86_in_a: endpoint {
448 remote-endpoint = <&mdss_dsi0_out>;
449 };
450 };
451
452 port@1 {
453 reg = <1>;
454 sn65dsi86_out: endpoint {
455 remote-endpoint = <&panel_in_edp>;
456 };
457 };
458 };
459
460 aux-bus {
461 panel: panel {
462 compatible = "boe,nv133fhm-n61";
463 backlight = <&backlight>;
464 power-supply = <&vlcm_3v3>;
465
466 port {
467 panel_in_edp: endpoint {
468 remote-endpoint = <&sn65dsi86_out>;
469 };
470 };
471 };
472 };
473 };
474};
475
476&i2c11 {
477 status = "okay";
478 clock-frequency = <400000>;
479
480 ecsh: hid@5c {
481 compatible = "hid-over-i2c";
482 reg = <0x5c>;
483 hid-descr-addr = <0x1>;
484
485 interrupts-extended = <&tlmm 92 IRQ_TYPE_LEVEL_LOW>;
486
487 pinctrl-names = "default";
488 pinctrl-0 = <&i2c11_hid_active>;
Tom Rini93743d22024-04-01 09:08:13 -0400489
490 wakeup-source;
Tom Rini53633a82024-02-29 12:33:36 -0500491 };
492};
493
494&ipa {
495 qcom,gsi-loader = "self";
496 memory-region = <&ipa_fw_mem>;
497 status = "okay";
498};
499
500&mdss {
501 status = "okay";
502};
503
504&mdss_dsi0 {
505 status = "okay";
506 vdda-supply = <&vreg_l26a_1p2>;
507
508 ports {
509 port@1 {
510 endpoint {
511 remote-endpoint = <&sn65dsi86_in_a>;
512 data-lanes = <0 1 2 3>;
513 };
514 };
515 };
516};
517
518&mdss_dsi0_phy {
519 status = "okay";
520 vdds-supply = <&vreg_l1a_0p875>;
521};
522
523&mss_pil {
524 status = "okay";
525 firmware-name = "qcom/sdm850/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/sdm850/LENOVO/81JL/qcdsp2850.mbn";
526};
527
528&pm8998_gpios {
529 /* This pin is pulled down by a fixed resistor */
530 sw_edp_1p2_en: pm8998-gpio9-state {
531 pins = "gpio9";
532 function = "normal";
533 bias-disable;
534 qcom,drive-strength = <0>;
535 };
536};
537
538&qup_i2c10_default {
539 drive-strength = <2>;
540 bias-disable;
541};
542
543&qup_i2c12_default {
544 drive-strength = <2>;
545 bias-disable;
546};
547
548&qupv3_id_0 {
549 status = "okay";
550};
551
552&qupv3_id_1 {
553 status = "okay";
554};
555
556&q6asmdai {
557 dai@0 {
558 reg = <0>;
559 };
560
561 dai@1 {
562 reg = <1>;
563 };
564
565 dai@2 {
566 reg = <2>;
567 };
568};
569
570&sound {
571 compatible = "lenovo,yoga-c630-sndcard", "qcom,sdm845-sndcard";
572 model = "Lenovo-YOGA-C630-13Q50";
573
574 audio-routing =
575 "RX_BIAS", "MCLK",
576 "AMIC2", "MIC BIAS2",
577 "SpkrLeft IN", "SPK1 OUT",
578 "SpkrRight IN", "SPK2 OUT",
579 "MM_DL1", "MultiMedia1 Playback",
580 "MM_DL3", "MultiMedia3 Playback",
581 "MultiMedia2 Capture", "MM_UL2";
582
583 mm1-dai-link {
584 link-name = "MultiMedia1";
585 cpu {
586 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
587 };
588 };
589
590 mm2-dai-link {
591 link-name = "MultiMedia2";
592 cpu {
593 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
594 };
595 };
596
597 mm3-dai-link {
598 link-name = "MultiMedia3";
599 cpu {
600 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
601 };
602 };
603
604 slim-dai-link {
605 link-name = "SLIM Playback";
606 cpu {
607 sound-dai = <&q6afedai SLIMBUS_0_RX>;
608 };
609
610 platform {
611 sound-dai = <&q6routing>;
612 };
613
614 codec {
615 sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
616 };
617 };
618
619 slimcap-dai-link {
620 link-name = "SLIM Capture";
621 cpu {
622 sound-dai = <&q6afedai SLIMBUS_0_TX>;
623 };
624
625 platform {
626 sound-dai = <&q6routing>;
627 };
628
629 codec {
630 sound-dai = <&wcd9340 1>;
631 };
632 };
633
634 slim-wcd-dai-link {
635 link-name = "SLIM WCD Playback";
636 cpu {
637 sound-dai = <&q6afedai SLIMBUS_1_RX>;
638 };
639
640 platform {
641 sound-dai = <&q6routing>;
642 };
643
644 codec {
645 sound-dai = <&wcd9340 2>;
646 };
647 };
648};
649
650&tlmm {
651 gpio-reserved-ranges = <0 4>, <81 4>;
652
653 sn65dsi86_pin_active: sn65dsi86-enable-state {
654 pins = "gpio96";
655 function = "gpio";
656 drive-strength = <2>;
657 bias-disable;
658 };
659
660 i2c3_hid_active: i2c2-hid-active-state {
661 pins = "gpio37";
662 function = "gpio";
663
664 bias-pull-up;
665 drive-strength = <2>;
666 };
667
668 i2c5_hid_active: i2c5-hid-active-state {
669 pins = "gpio125";
670 function = "gpio";
671
672 bias-pull-up;
673 drive-strength = <2>;
674 };
675
676 i2c11_hid_active: i2c11-hid-active-state {
677 pins = "gpio92";
678 function = "gpio";
679
680 bias-pull-up;
681 drive-strength = <2>;
682 };
683
684 lid_pin_active: lid-pin-state {
685 pins = "gpio124";
686 function = "gpio";
687
688 bias-disable;
689 };
690
691 mode_pin_active: mode-pin-state {
692 pins = "gpio95";
693 function = "gpio";
694
695 bias-disable;
696 };
697};
698
699&uart6 {
700 pinctrl-names = "default";
701 pinctrl-0 = <&qup_uart6_4pin>;
702 status = "okay";
703
704 bluetooth {
705 compatible = "qcom,wcn3990-bt";
706
707 vddio-supply = <&vreg_s4a_1p8>;
708 vddxo-supply = <&vreg_l7a_1p8>;
709 vddrf-supply = <&vreg_l17a_1p3>;
710 vddch0-supply = <&vreg_l25a_3p3>;
711 vddch1-supply = <&vreg_l23a_3p3>;
712 max-speed = <3200000>;
713 };
714};
715
716&uart9 {
717 status = "okay";
718};
719
720&ufs_mem_hc {
721 status = "okay";
722
723 reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
724
725 vcc-supply = <&vreg_l20a_2p95>;
726 vcc-max-microamp = <600000>;
727};
728
729&ufs_mem_phy {
730 status = "okay";
731
732 vdda-phy-supply = <&vdda_ufs1_core>;
733 vdda-pll-supply = <&vdda_ufs1_1p2>;
734};
735
736&usb_1 {
737 status = "okay";
738};
739
740&usb_1_dwc3 {
741 dr_mode = "host";
742};
743
744&usb_1_hsphy {
745 status = "okay";
746
747 vdd-supply = <&vdda_usb1_ss_core>;
748 vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
749 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
750
751 qcom,imp-res-offset-value = <8>;
752 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
753 qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
754 qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
755};
756
757&usb_1_qmpphy {
758 status = "okay";
759
760 vdda-phy-supply = <&vdda_usb1_ss_1p2>;
761 vdda-pll-supply = <&vdda_usb1_ss_core>;
762};
763
764&usb_2 {
765 status = "okay";
766};
767
768&usb_2_dwc3 {
769 dr_mode = "host";
770};
771
772&usb_2_hsphy {
773 status = "okay";
774
775 vdd-supply = <&vdda_usb2_ss_core>;
776 vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
777 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
778
779 qcom,imp-res-offset-value = <8>;
780 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
781};
782
783&usb_2_qmpphy {
784 status = "okay";
785
786 vdda-phy-supply = <&vdda_usb2_ss_1p2>;
787 vdda-pll-supply = <&vdda_usb2_ss_core>;
788};
789
790&venus {
791 firmware-name = "qcom/sdm850/LENOVO/81JL/qcvss850.mbn";
792 status = "okay";
793};
794
795&wcd9340 {
796 reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
797 vdd-buck-supply = <&vreg_s4a_1p8>;
798 vdd-buck-sido-supply = <&vreg_s4a_1p8>;
799 vdd-tx-supply = <&vreg_s4a_1p8>;
800 vdd-rx-supply = <&vreg_s4a_1p8>;
801 vdd-io-supply = <&vreg_s4a_1p8>;
802 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
803 qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
804 qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
805
Tom Rini93743d22024-04-01 09:08:13 -0400806 swm: soundwire@c85 {
Tom Rini53633a82024-02-29 12:33:36 -0500807 left_spkr: speaker@0,3 {
808 compatible = "sdw10217211000";
809 reg = <0 3>;
810 powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>;
811 #thermal-sensor-cells = <0>;
812 sound-name-prefix = "SpkrLeft";
813 #sound-dai-cells = <0>;
814 };
815
816 right_spkr: speaker@0,4 {
817 compatible = "sdw10217211000";
818 powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>;
819 reg = <0 4>;
820 #thermal-sensor-cells = <0>;
821 sound-name-prefix = "SpkrRight";
822 #sound-dai-cells = <0>;
823 };
824 };
825};
826
827&wifi {
828 status = "okay";
829
830 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
831 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
832 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
833 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
834 vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
835
836 qcom,snoc-host-cap-8bit-quirk;
837};
838
839&crypto {
840 /* FIXME: qce_start triggers an SError */
841 status = "disabled";
842};