Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 67d544a86efe6aebc870ab83bbe056846ba0be87 / . / arch / arm / dts / dra72-evm-revc.dts
blob: bf588d00728d1973c3426f09421dc5c2bbb5bbe0 [file] [log] [blame]
Mugunthan V Nb8c6b022016-09-27 13:01:41 +0530[diff] [blame]1/*
2 * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8#include "dra72-evm-common.dtsi"
Lokesh Vutlacfa23a42017-08-21 12:50:59 +0530[diff] [blame]9#include "dra72x-mmc-iodelay.dtsi"
Mugunthan V Nb8c6b022016-09-27 13:01:41 +0530[diff] [blame]10#include <dt-bindings/net/ti-dp83867.h>
11
12/ {
13 model = "TI DRA722 Rev C EVM";
14
Lokesh Vutlada047422016-11-23 13:25:29 +0530[diff] [blame]15 memory@0 {
Mugunthan V Nb8c6b022016-09-27 13:01:41 +0530[diff] [blame]16 device_type = "memory";
17 reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
18 };
Lokesh Vutlacfa23a42017-08-21 12:50:59 +0530[diff] [blame]19
20 evm_1v8_sw: fixedregulator-evm_1v8 {
21 compatible = "regulator-fixed";
22 regulator-name = "evm_1v8";
23 regulator-min-microvolt = <1800000>;
24 regulator-max-microvolt = <1800000>;
25 vin-supply = <&smps4_reg>;
26 regulator-always-on;
27 regulator-boot-on;
28 };
Mugunthan V Nb8c6b022016-09-27 13:01:41 +0530[diff] [blame]29};
30
Lokesh Vutlada047422016-11-23 13:25:29 +0530[diff] [blame]31&i2c1 {
32 tps65917: tps65917@58 {
33 reg = <0x58>;
34
35 interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
Mugunthan V Nb8c6b022016-09-27 13:01:41 +0530[diff] [blame]36 };
37};
38
Lokesh Vutlada047422016-11-23 13:25:29 +0530[diff] [blame]39#include "dra72-evm-tps65917.dtsi"
40
41&ldo2_reg {
42 /* LDO2_OUT --> VDDA_1V8_PHY2 */
43 regulator-always-on;
44 regulator-boot-on;
45};
46
Mugunthan V Nb8c6b022016-09-27 13:01:41 +0530[diff] [blame]47&hdmi {
Lokesh Vutlada047422016-11-23 13:25:29 +0530[diff] [blame]48 vdda-supply = <&ldo2_reg>;
49};
50
51&pcf_gpio_21 {
52 interrupt-parent = <&gpio3>;
53 interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
Mugunthan V Nb8c6b022016-09-27 13:01:41 +0530[diff] [blame]54};
55
56&mac {
57 mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
58 <&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */
59 <&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */
60 dual_emac;
61};
62
63&cpsw_emac0 {
Lokesh Vutlacfa23a42017-08-21 12:50:59 +0530[diff] [blame]64 phy_id = <&davinci_mdio>, <2>;
Mugunthan V Nb8c6b022016-09-27 13:01:41 +0530[diff] [blame]65 phy-mode = "rgmii-id";
66 dual_emac_res_vlan = <1>;
67};
68
69&cpsw_emac1 {
Lokesh Vutlacfa23a42017-08-21 12:50:59 +0530[diff] [blame]70 phy_id = <&davinci_mdio>, <3>;
Mugunthan V Nb8c6b022016-09-27 13:01:41 +0530[diff] [blame]71 phy-mode = "rgmii-id";
72 dual_emac_res_vlan = <2>;
73};
74
75&davinci_mdio {
76 dp83867_0: ethernet-phy@2 {
77 reg = <2>;
78 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
79 ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
80 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
Mugunthan V N5b6b18e2017-01-24 11:15:40 -0600[diff] [blame]81 ti,min-output-impedance;
Lokesh Vutlacfa23a42017-08-21 12:50:59 +0530[diff] [blame]82 interrupt-parent = <&gpio6>;
83 interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
84 ti,dp83867-rxctrl-strap-quirk;
Mugunthan V Nb8c6b022016-09-27 13:01:41 +0530[diff] [blame]85 };
86
87 dp83867_1: ethernet-phy@3 {
88 reg = <3>;
89 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
90 ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
91 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
Mugunthan V N5b6b18e2017-01-24 11:15:40 -0600[diff] [blame]92 ti,min-output-impedance;
Lokesh Vutlacfa23a42017-08-21 12:50:59 +0530[diff] [blame]93 interrupt-parent = <&gpio6>;
94 interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
95 ti,dp83867-rxctrl-strap-quirk;
Mugunthan V Nb8c6b022016-09-27 13:01:41 +0530[diff] [blame]96 };
97};
Lokesh Vutlacfa23a42017-08-21 12:50:59 +0530[diff] [blame]98
99&mmc1 {
100 pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
101 pinctrl-0 = <&mmc1_pins_default>;
102 pinctrl-1 = <&mmc1_pins_hs>;
103 pinctrl-2 = <&mmc1_pins_sdr12>;
104 pinctrl-3 = <&mmc1_pins_sdr25>;
105 pinctrl-4 = <&mmc1_pins_sdr50>;
106 pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
107 pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
108 vqmmc-supply = <&ldo1_reg>;
109};
110
111&mmc2 {
112 pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
113 pinctrl-0 = <&mmc2_pins_default>;
114 pinctrl-1 = <&mmc2_pins_hs>;
115 pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
116 pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
117 vmmc-supply = <&evm_1v8_sw>;
118};