blob: 43efe7d4e942f1b9b2cbbb1f367f8947badc8770 [file] [log] [blame]
Simon Glass29499a02016-01-17 20:53:51 -07001menu "Command line interface"
2
Simon Glassaa34ef22016-03-13 19:07:28 -06003config CMDLINE
4 bool "Support U-Boot commands"
5 default y
6 help
7 Enable U-Boot's command-line functions. This provides a means
8 to enter commands into U-Boot for a wide variety of purposes. It
9 also allows scripts (containing commands) to be executed.
10 Various commands and command categorys can be indivdually enabled.
11 Depending on the number of commands enabled, this can add
12 substantially to the size of U-Boot.
13
Simon Glass29499a02016-01-17 20:53:51 -070014config HUSH_PARSER
15 bool "Use hush shell"
Simon Glassaa34ef22016-03-13 19:07:28 -060016 depends on CMDLINE
Simon Glass29499a02016-01-17 20:53:51 -070017 help
18 This option enables the "hush" shell (from Busybox) as command line
19 interpreter, thus enabling powerful command line syntax like
20 if...then...else...fi conditionals or `&&' and '||'
21 constructs ("shell scripts").
22
23 If disabled, you get the old, much simpler behaviour with a somewhat
24 smaller memory footprint.
25
Adam Ford58dbf862018-02-06 07:58:59 -060026config CMDLINE_EDITING
27 bool "Enable command line editing"
28 depends on CMDLINE
29 default y
30 help
31 Enable editing and History functions for interactive command line
32 input operations
33
34config AUTO_COMPLETE
35 bool "Enable auto complete using TAB"
36 depends on CMDLINE
37 default y
38 help
39 Enable auto completion of commands using TAB.
40
41config SYS_LONGHELP
42 bool "Enable long help messages"
43 depends on CMDLINE
44 default y if CMDLINE
45 help
46 Defined when you want long help messages included
47 Do not set this option when short of memory.
48
Simon Glass29499a02016-01-17 20:53:51 -070049config SYS_PROMPT
50 string "Shell prompt"
51 default "=> "
52 help
53 This string is displayed in the command line to the left of the
54 cursor.
55
56menu "Autoboot options"
57
Masahiro Yamada622a01c2016-06-20 17:33:39 +090058config AUTOBOOT
59 bool "Autoboot"
60 default y
61 help
62 This enables the autoboot. See doc/README.autoboot for detail.
63
Simon Glass29499a02016-01-17 20:53:51 -070064config AUTOBOOT_KEYED
65 bool "Stop autobooting via specific input key / string"
66 default n
67 help
68 This option enables stopping (aborting) of the automatic
69 boot feature only by issuing a specific input key or
70 string. If not enabled, any input key will abort the
71 U-Boot automatic booting process and bring the device
72 to the U-Boot prompt for user input.
73
74config AUTOBOOT_PROMPT
75 string "Autoboot stop prompt"
76 depends on AUTOBOOT_KEYED
77 default "Autoboot in %d seconds\\n"
78 help
79 This string is displayed before the boot delay selected by
80 CONFIG_BOOTDELAY starts. If it is not defined there is no
81 output indicating that autoboot is in progress.
82
83 Note that this define is used as the (only) argument to a
84 printf() call, so it may contain '%' format specifications,
85 provided that it also includes, sepearated by commas exactly
86 like in a printf statement, the required arguments. It is
87 the responsibility of the user to select only such arguments
88 that are valid in the given context.
89
90config AUTOBOOT_ENCRYPTION
91 bool "Enable encryption in autoboot stopping"
92 depends on AUTOBOOT_KEYED
93 default n
94
95config AUTOBOOT_DELAY_STR
96 string "Delay autobooting via specific input key / string"
97 depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
98 help
99 This option delays the automatic boot feature by issuing
100 a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR
101 or the environment variable "bootdelaykey" is specified
102 and this string is received from console input before
103 autoboot starts booting, U-Boot gives a command prompt. The
104 U-Boot prompt will time out if CONFIG_BOOT_RETRY_TIME is
105 used, otherwise it never times out.
106
107config AUTOBOOT_STOP_STR
108 string "Stop autobooting via specific input key / string"
109 depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
110 help
111 This option enables stopping (aborting) of the automatic
112 boot feature only by issuing a specific input key or
113 string. If CONFIG_AUTOBOOT_STOP_STR or the environment
114 variable "bootstopkey" is specified and this string is
115 received from console input before autoboot starts booting,
116 U-Boot gives a command prompt. The U-Boot prompt never
117 times out, even if CONFIG_BOOT_RETRY_TIME is used.
118
119config AUTOBOOT_KEYED_CTRLC
120 bool "Enable Ctrl-C autoboot interruption"
121 depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
122 default n
123 help
124 This option allows for the boot sequence to be interrupted
125 by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey".
126 Setting this variable provides an escape sequence from the
127 limited "password" strings.
128
129config AUTOBOOT_STOP_STR_SHA256
130 string "Stop autobooting via SHA256 encrypted password"
131 depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION
132 help
133 This option adds the feature to only stop the autobooting,
134 and therefore boot into the U-Boot prompt, when the input
135 string / password matches a values that is encypted via
136 a SHA256 hash and saved in the environment.
137
138endmenu
139
Steve Rae437689f2016-08-15 17:26:26 -0700140source "cmd/fastboot/Kconfig"
141
Sam Protsenko13c1f3a2017-09-28 12:33:45 -0700142config BUILD_BIN2C
143 bool
144
Simon Glass29499a02016-01-17 20:53:51 -0700145comment "Commands"
146
147menu "Info commands"
148
149config CMD_BDI
150 bool "bdinfo"
151 default y
152 help
153 Print board info
154
Masahiro Yamadabb92b422017-01-30 11:12:07 +0900155config CMD_CONFIG
156 bool "config"
157 select BUILD_BIN2C
158 default SANDBOX
159 help
160 Print ".config" contents.
161
162 If this option is enabled, the ".config" file contents are embedded
163 in the U-Boot image and can be printed on the console by the "config"
164 command. This provides information of which options are enabled on
165 the running U-Boot.
166
Simon Glass29499a02016-01-17 20:53:51 -0700167config CMD_CONSOLE
168 bool "coninfo"
169 default y
170 help
171 Print console devices and information.
172
173config CMD_CPU
174 bool "cpu"
175 help
176 Print information about available CPUs. This normally shows the
177 number of CPUs, type (e.g. manufacturer, architecture, product or
178 internal name) and clock frequency. Other information may be
179 available depending on the CPU driver.
180
181config CMD_LICENSE
182 bool "license"
Masahiro Yamada81680332017-01-30 11:12:08 +0900183 select BUILD_BIN2C
Simon Glass29499a02016-01-17 20:53:51 -0700184 help
185 Print GPL license text
186
Christophe Leroye538bbc2017-08-04 16:34:40 -0600187config CMD_REGINFO
188 bool "reginfo"
189 depends on PPC
190 help
191 Register dump
192
Simon Glass29499a02016-01-17 20:53:51 -0700193endmenu
194
195menu "Boot commands"
196
197config CMD_BOOTD
198 bool "bootd"
199 default y
200 help
201 Run the command stored in the environment "bootcmd", i.e.
202 "bootd" does the same thing as "run bootcmd".
203
204config CMD_BOOTM
205 bool "bootm"
206 default y
207 help
208 Boot an application image from the memory.
209
Dinh Nguyen0685bef2016-04-21 09:05:23 -0500210config CMD_BOOTZ
211 bool "bootz"
212 help
213 Boot the Linux zImage
214
Masahiro Yamada04cf1552016-08-12 08:31:16 -0400215config CMD_BOOTI
216 bool "booti"
217 depends on ARM64
218 default y
219 help
220 Boot an AArch64 Linux Kernel image from memory.
221
Alexander Grafe2b04f22016-03-10 00:27:20 +0100222config CMD_BOOTEFI
223 bool "bootefi"
224 depends on EFI_LOADER
225 default y
226 help
227 Boot an EFI image from memory.
228
Alexander Grafb5483512016-11-17 22:40:10 +0100229config CMD_BOOTEFI_HELLO_COMPILE
230 bool "Compile a standard EFI hello world binary for testing"
231 depends on CMD_BOOTEFI && (ARM || X86)
232 default y
233 help
234 This compiles a standard EFI hello world application with U-Boot so
235 that it can be used with the test/py testing framework. This is useful
236 for testing that EFI is working at a basic level, and for bringing
237 up EFI support on a new architecture.
238
239 No additional space will be required in the resulting U-Boot binary
240 when this option is enabled.
241
Simon Glassfac4ced2016-11-07 08:47:08 -0700242config CMD_BOOTEFI_HELLO
243 bool "Allow booting a standard EFI hello world for testing"
Alexander Grafb5483512016-11-17 22:40:10 +0100244 depends on CMD_BOOTEFI_HELLO_COMPILE
Simon Glassfac4ced2016-11-07 08:47:08 -0700245 help
246 This adds a standard EFI hello world application to U-Boot so that
247 it can be used with the 'bootefi hello' command. This is useful
248 for testing that EFI is working at a basic level, and for bringing
249 up EFI support on a new architecture.
250
Heinrich Schuchardtd33ae3e2017-09-15 10:06:11 +0200251source lib/efi_selftest/Kconfig
252
Tom Rini697f4732016-11-29 09:14:56 -0500253config CMD_BOOTMENU
254 bool "bootmenu"
255 select MENU
256 help
257 Add an ANSI terminal boot menu command.
258
Simon Glass29499a02016-01-17 20:53:51 -0700259config CMD_ELF
260 bool "bootelf, bootvx"
261 default y
262 help
263 Boot an ELF/vxWorks image from the memory.
264
Michal Simekf168c652016-04-06 20:28:04 +0200265config CMD_FDT
266 bool "Flattened Device Tree utility commands"
267 default y
268 depends on OF_LIBFDT
269 help
270 Do FDT related setup before booting into the Operating System.
271
Simon Glass29499a02016-01-17 20:53:51 -0700272config CMD_GO
273 bool "go"
274 default y
275 help
276 Start an application at a given address.
277
278config CMD_RUN
279 bool "run"
280 default y
281 help
282 Run the command in the given environment variable.
283
284config CMD_IMI
285 bool "iminfo"
286 default y
287 help
288 Print header information for application image.
289
290config CMD_IMLS
291 bool "imls"
Simon Glass29499a02016-01-17 20:53:51 -0700292 help
293 List all images found in flash
294
295config CMD_XIMG
296 bool "imxtract"
297 default y
298 help
299 Extract a part of a multi-image.
300
301config CMD_POWEROFF
Michal Simek73147d82017-06-05 08:28:17 +0200302 bool "poweroff"
303 help
304 Poweroff/Shutdown the system
Simon Glass29499a02016-01-17 20:53:51 -0700305
Simon Glassc6567fa2017-08-04 16:34:48 -0600306config CMD_SPL
307 bool "spl export - Export boot information for Falcon boot"
308 depends on SPL
309 help
310 Falcon mode allows booting directly from SPL into an Operating
311 System such as Linux, thus skipping U-Boot proper. See
312 doc/README.falcon for full information about how to use this
313 command.
314
Simon Glassc034e3d2017-08-04 16:34:49 -0600315config CMD_SPL_NAND_OFS
316 hex "Offset of OS command line args for Falcon-mode NAND boot"
317 depends on CMD_SPL
318 default 0
319 help
320 This provides the offset of the command line arguments for Linux
321 when booting from NAND in Falcon mode. See doc/README.falcon
322 for full information about how to use this option (and also see
323 board/gateworks/gw_ventana/README for an example).
324
Simon Glass51ef45a2017-08-04 16:34:50 -0600325config CMD_SPL_WRITE_SIZE
326 hex "Size of argument area"
327 depends on CMD_SPL
328 default 0x2000
329 help
330 This provides the size of the command-line argument area in NAND
331 flash used by Falcon-mode boot. See the documentation until CMD_SPL
332 for detail.
333
Marek Vasut113c0252018-02-10 16:22:05 +0100334config CMD_FITUPD
335 bool "fitImage update command"
336 help
337 Implements the 'fitupd' command, which allows to automatically
338 store software updates present on a TFTP server in NOR Flash
339
Simon Glassa18b9692017-08-04 16:34:57 -0600340config CMD_THOR_DOWNLOAD
341 bool "thor - TIZEN 'thor' download"
342 help
343 Implements the 'thor' download protocol. This is a way of
344 downloading a software update over USB from an attached host.
345 There is no documentation about this within the U-Boot source code
346 but you should be able to find something on the interwebs.
347
Simon Glass01d097d2017-08-04 16:35:03 -0600348config CMD_ZBOOT
349 bool "zboot - x86 boot command"
350 help
351 With x86 machines it is common to boot a bzImage file which
352 contains both a kernel and a setup.bin file. The latter includes
353 configuration information from the dark ages which x86 boards still
354 need to pick things out of.
355
356 Consider using FIT in preference to this since it supports directly
357 booting both 32- and 64-bit kernels, as well as secure boot.
358 Documentation is available in doc/uImage.FIT/x86-fit-boot.txt
359
Simon Glass29499a02016-01-17 20:53:51 -0700360endmenu
361
362menu "Environment commands"
363
Dinh Nguyen0685bef2016-04-21 09:05:23 -0500364config CMD_ASKENV
365 bool "ask for env variable"
366 help
367 Ask for environment variable
368
Simon Glass29499a02016-01-17 20:53:51 -0700369config CMD_EXPORTENV
370 bool "env export"
371 default y
372 help
373 Export environments.
374
375config CMD_IMPORTENV
376 bool "env import"
377 default y
378 help
379 Import environments.
380
381config CMD_EDITENV
382 bool "editenv"
383 default y
384 help
385 Edit environment variable.
386
Dinh Nguyen0685bef2016-04-21 09:05:23 -0500387config CMD_GREPENV
388 bool "search env"
389 help
390 Allow for searching environment variables
391
Simon Glass29499a02016-01-17 20:53:51 -0700392config CMD_SAVEENV
393 bool "saveenv"
394 default y
395 help
396 Save all environment variables into the compiled-in persistent
397 storage.
398
399config CMD_ENV_EXISTS
400 bool "env exists"
401 default y
402 help
403 Check if a variable is defined in the environment for use in
404 shell scripting.
405
Simon Glass84d67c72017-05-17 03:25:13 -0600406config CMD_ENV_CALLBACK
407 bool "env callbacks - print callbacks and their associated variables"
408 help
409 Some environment variable have callbacks defined by
410 U_BOOT_ENV_CALLBACK. These are called when the variable changes.
411 For example changing "baudrate" adjust the serial baud rate. This
412 command lists the currently defined callbacks.
413
Simon Glassc31e2d82017-05-17 03:25:14 -0600414config CMD_ENV_FLAGS
415 bool "env flags -print variables that have non-default flags"
416 help
417 Some environment variables have special flags that control their
418 behaviour. For example, serial# can only be written once and cannot
419 be deleted. This command shows the variables that have special
420 flags.
421
Simon Glass29499a02016-01-17 20:53:51 -0700422endmenu
423
424menu "Memory commands"
425
Mario Six8a4f6642018-03-28 14:39:18 +0200426config CMD_BINOP
427 bool "binop"
428 help
429 Compute binary operations (xor, or, and) of byte arrays of arbitrary
430 size from memory and store the result in memory or the environment.
431
Simon Glass29499a02016-01-17 20:53:51 -0700432config CMD_CRC32
433 bool "crc32"
Simon Glassb22ec7a2017-05-17 09:05:34 -0600434 select HASH
Simon Glass29499a02016-01-17 20:53:51 -0700435 default y
436 help
437 Compute CRC32.
438
Daniel Thompsona9e2c672017-05-19 17:26:58 +0100439config CRC32_VERIFY
440 bool "crc32 -v"
441 depends on CMD_CRC32
442 help
443 Add -v option to verify data against a crc32 checksum.
444
Simon Glass4590d4e2017-05-17 03:25:10 -0600445config CMD_EEPROM
446 bool "eeprom - EEPROM subsystem"
447 help
448 (deprecated, needs conversion to driver model)
449 Provides commands to read and write EEPROM (Electrically Erasable
450 Programmable Read Only Memory) chips that are connected over an
451 I2C bus.
452
453config CMD_EEPROM_LAYOUT
454 bool "Enable layout-aware eeprom commands"
455 depends on CMD_EEPROM
456 help
457 (deprecated, needs conversion to driver model)
458 When enabled, additional eeprom sub-commands become available.
459
460 eeprom print - prints the contents of the eeprom in a human-readable
461 way (eeprom layout fields, and data formatted to be fit for human
462 consumption).
463
464 eeprom update - allows user to update eeprom fields by specifying
465 the field name, and providing the new data in a human readable format
466 (same format as displayed by the eeprom print command).
467
468 Both commands can either auto detect the layout, or be told which
469 layout to use.
470
471 Feature API:
472 __weak int parse_layout_version(char *str)
473 - override to provide your own layout name parsing
474 __weak void __eeprom_layout_assign(struct eeprom_layout *layout,
475 int layout_version);
476 - override to setup the layout metadata based on the version
477 __weak int eeprom_layout_detect(unsigned char *data)
478 - override to provide your own algorithm for detecting layout
479 version
480 eeprom_field.c
481 - contains various printing and updating functions for common
482 types of eeprom fields. Can be used for defining
483 custom layouts.
484
485config EEPROM_LAYOUT_HELP_STRING
486 string "Tells user what layout names are supported"
487 depends on CMD_EEPROM_LAYOUT
488 default "<not defined>"
489 help
490 Help printed with the LAYOUT VERSIONS part of the 'eeprom'
491 command's help.
492
Simon Glass26c20532017-08-04 16:34:51 -0600493config LOOPW
494 bool "loopw"
495 help
496 Infinite write loop on address range
497
Andre Przywaraf0fa1132017-03-15 01:19:05 +0000498config CMD_MD5SUM
499 bool "md5sum"
500 default n
501 select MD5
502 help
503 Compute MD5 checksum.
504
Daniel Thompsona9e2c672017-05-19 17:26:58 +0100505config MD5SUM_VERIFY
Andre Przywaraf0fa1132017-03-15 01:19:05 +0000506 bool "md5sum -v"
507 default n
508 depends on CMD_MD5SUM
509 help
510 Add -v option to verify data against an MD5 checksum.
511
Simon Glass26c20532017-08-04 16:34:51 -0600512config CMD_MEMINFO
513 bool "meminfo"
Daniel Thompsona9e2c672017-05-19 17:26:58 +0100514 help
Simon Glass26c20532017-08-04 16:34:51 -0600515 Display memory information.
Daniel Thompsona9e2c672017-05-19 17:26:58 +0100516
Simon Glass26c20532017-08-04 16:34:51 -0600517config CMD_MEMORY
518 bool "md, mm, nm, mw, cp, cmp, base, loop"
519 default y
Simon Glass29499a02016-01-17 20:53:51 -0700520 help
Simon Glass26c20532017-08-04 16:34:51 -0600521 Memory commands.
522 md - memory display
523 mm - memory modify (auto-incrementing address)
524 nm - memory modify (constant address)
525 mw - memory write (fill)
526 cp - memory copy
527 cmp - memory compare
528 base - print or set address offset
529 loop - initialize loop on address range
Simon Glass29499a02016-01-17 20:53:51 -0700530
531config CMD_MEMTEST
532 bool "memtest"
533 help
534 Simple RAM read/write test.
535
Mario Six00518992018-03-28 14:38:14 +0200536if CMD_MEMTEST
537
538config SYS_ALT_MEMTEST
539 bool "Alternative test"
540 help
541 Use a more complete alternative memory test.
542
543endif
544
Simon Glass29499a02016-01-17 20:53:51 -0700545config CMD_MX_CYCLIC
546 bool "mdc, mwc"
547 help
548 mdc - memory display cyclic
549 mwc - memory write cyclic
550
Simon Glass26c20532017-08-04 16:34:51 -0600551config CMD_SHA1SUM
552 bool "sha1sum"
553 select SHA1
Simon Glass29499a02016-01-17 20:53:51 -0700554 help
Simon Glass26c20532017-08-04 16:34:51 -0600555 Compute SHA1 checksum.
556
557config SHA1SUM_VERIFY
558 bool "sha1sum -v"
559 depends on CMD_SHA1SUM
560 help
561 Add -v option to verify data against a SHA1 checksum.
Simon Glass29499a02016-01-17 20:53:51 -0700562
Simon Glass8e83ca82017-08-04 16:34:52 -0600563config CMD_STRINGS
564 bool "strings - display strings in memory"
565 help
566 This works similarly to the Unix 'strings' command except that it
567 works with a memory range. String of printable characters found
568 within the range are displayed. The minimum number of characters
569 for a sequence to be considered a string can be provided.
570
Simon Glassbecaa8f2017-05-17 03:25:43 -0600571endmenu
572
573menu "Compression commands"
574
575config CMD_LZMADEC
576 bool "lzmadec"
Tom Rini3237bc62017-09-29 14:32:44 -0400577 default y if CMD_BOOTI
Simon Glassbecaa8f2017-05-17 03:25:43 -0600578 select LZMA
579 help
580 Support decompressing an LZMA (Lempel-Ziv-Markov chain algorithm)
581 image from memory.
582
Masahiro Yamada2737fd32017-02-05 10:42:56 +0900583config CMD_UNZIP
584 bool "unzip"
Tom Rini3237bc62017-09-29 14:32:44 -0400585 default y if CMD_BOOTI
Masahiro Yamada2737fd32017-02-05 10:42:56 +0900586 help
587 Uncompress a zip-compressed memory region.
588
589config CMD_ZIP
590 bool "zip"
591 help
592 Compress a memory region with zlib deflate method.
593
Simon Glass29499a02016-01-17 20:53:51 -0700594endmenu
595
596menu "Device access commands"
597
Simon Glass036bbb12017-08-04 16:34:28 -0600598config CMD_ARMFLASH
599 #depends on FLASH_CFI_DRIVER
600 bool "armflash"
601 help
602 ARM Ltd reference designs flash partition access
603
Simon Glass04ac6f12017-04-26 22:28:02 -0600604config CMD_CLK
605 bool "clk - Show clock frequencies"
606 help
607 (deprecated)
608 Shows clock frequences by calling a sock_clk_dump() hook function.
609 This is depreated in favour of using the CLK uclass and accessing
610 clock values from associated drivers. However currently no command
611 exists for this.
612
Simon Glass036bbb12017-08-04 16:34:28 -0600613config CMD_DEMO
614 bool "demo - Demonstration commands for driver model"
615 depends on DM
616 help
617 Provides a 'demo' command which can be used to play around with
618 driver model. To use this properly you will need to enable one or
619 both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
620 Otherwise you will always get an empty list of devices. The demo
621 devices are defined in the sandbox device tree, so the easiest
622 option is to use sandbox and pass the -d point to sandbox's
623 u-boot.dtb file.
624
625config CMD_DFU
626 bool "dfu"
Marek Vasutea84f802018-02-16 16:41:17 +0100627 select DFU
Simon Glass036bbb12017-08-04 16:34:28 -0600628 help
629 Enables the command "dfu" which is used to have U-Boot create a DFU
Simon Glass663b0cc2017-08-04 16:35:06 -0600630 class device via USB. This command requires that the "dfu_alt_info"
631 environment variable be set and define the alt settings to expose to
632 the host.
Simon Glass036bbb12017-08-04 16:34:28 -0600633
Simon Glass29499a02016-01-17 20:53:51 -0700634config CMD_DM
635 bool "dm - Access to driver model information"
636 depends on DM
637 default y
638 help
639 Provides access to driver model data structures and information,
640 such as a list of devices, list of uclasses and the state of each
641 device (e.g. activated). This is not required for operation, but
642 can be useful to see the state of driver model for debugging or
643 interest.
644
Simon Glass036bbb12017-08-04 16:34:28 -0600645config CMD_FDC
646 bool "fdcboot - Boot from floppy device"
Simon Glass29499a02016-01-17 20:53:51 -0700647 help
Simon Glass036bbb12017-08-04 16:34:28 -0600648 The 'fdtboot' command allows booting an image from a floppy disk.
649
650config CMD_FLASH
651 bool "flinfo, erase, protect"
652 default y
653 help
654 NOR flash support.
655 flinfo - print FLASH memory information
656 erase - FLASH memory
657 protect - enable or disable FLASH write protection
658
659config CMD_FPGA
660 bool "fpga"
Tuomas Tynkkynen5ca16b32018-01-27 20:28:40 +0200661 depends on FPGA
Simon Glass036bbb12017-08-04 16:34:28 -0600662 default y
663 help
664 FPGA support.
665
666config CMD_FPGA_LOADBP
667 bool "fpga loadbp - load partial bitstream (Xilinx only)"
668 depends on CMD_FPGA
669 help
670 Supports loading an FPGA device from a bitstream buffer containing
671 a partial bitstream.
672
673config CMD_FPGA_LOADFS
674 bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)"
675 depends on CMD_FPGA
676 help
677 Supports loading an FPGA device from a FAT filesystem.
678
679config CMD_FPGA_LOADMK
680 bool "fpga loadmk - load bitstream from image"
681 depends on CMD_FPGA
682 help
683 Supports loading an FPGA device from a image generated by mkimage.
684
685config CMD_FPGA_LOADP
686 bool "fpga loadp - load partial bitstream"
687 depends on CMD_FPGA
688 help
689 Supports loading an FPGA device from a bitstream buffer containing
690 a partial bitstream.
691
692config CMD_FPGAD
693 bool "fpgad - dump FPGA registers"
694 help
695 (legacy, needs conversion to driver model)
696 Provides a way to dump FPGA registers by calling the board-specific
697 fpga_get_reg() function. This functions similarly to the 'md'
698 command.
699
700config CMD_FUSE
701 bool "fuse - support for the fuse subssystem"
702 help
703 (deprecated - needs conversion to driver model)
704 This allows reading, sensing, programming or overriding fuses
705 which control the behaviour of the device. The command uses the
706 fuse_...() API.
707
708config CMD_GPIO
709 bool "gpio"
710 help
711 GPIO support.
712
713config CMD_GPT
714 bool "GPT (GUID Partition Table) command"
715 select PARTITION_UUIDS
716 select EFI_PARTITION
Adam Fordb10ba902018-02-06 12:43:56 -0600717 select HAVE_BLOCK_DEVICE
Maxime Ripard24336442017-08-24 11:52:32 +0200718 imply RANDOM_UUID
Simon Glass036bbb12017-08-04 16:34:28 -0600719 help
720 Enable the 'gpt' command to ready and write GPT style partition
721 tables.
722
Maxime Ripard24336442017-08-24 11:52:32 +0200723config RANDOM_UUID
724 bool "GPT Random UUID generation"
Adam Ford70c8f052018-02-06 12:14:28 -0600725 select LIB_UUID
Maxime Ripard24336442017-08-24 11:52:32 +0200726 help
727 Enable the generation of partitions with random UUIDs if none
728 are provided.
729
Simon Glass036bbb12017-08-04 16:34:28 -0600730config CMD_GPT_RENAME
731 bool "GPT partition renaming commands"
732 depends on CMD_GPT
733 help
734 Enables the 'gpt' command to interchange names on two GPT
735 partitions via the 'gpt swap' command or to rename single
736 partitions via the 'rename' command.
Simon Glass29499a02016-01-17 20:53:51 -0700737
Simon Glassa831eca2017-05-17 03:25:29 -0600738config CMD_IDE
739 bool "ide - Support for IDE drivers"
Simon Glassb569a012017-05-17 03:25:30 -0600740 select IDE
Simon Glassa831eca2017-05-17 03:25:29 -0600741 help
742 Provides an 'ide' command which allows accessing the IDE drive,
743 reseting the IDE interface, printing the partition table and
744 geting device info. It also enables the 'diskboot' command which
745 permits booting from an IDE drive.
746
Simon Glass3bebbe62017-05-17 03:25:34 -0600747config CMD_IO
748 bool "io - Support for performing I/O accesses"
749 help
750 Provides an 'iod' command to display I/O space and an 'iow' command
751 to write values to the I/O space. This can be useful for manually
752 checking the state of devices during boot when debugging device
753 drivers, etc.
754
Simon Glass30daabc2017-05-17 03:25:36 -0600755config CMD_IOTRACE
756 bool "iotrace - Support for tracing I/O activity"
757 help
758 Provides an 'iotrace' command which supports recording I/O reads and
759 writes in a trace buffer in memory . It also maintains a checksum
760 of the trace records (even if space is exhausted) so that the
761 sequence of I/O accesses can be verified.
762
763 When debugging drivers it is useful to see what I/O accesses were
764 done and in what order.
765
766 Even if the individual accesses are of little interest it can be
767 useful to verify that the access pattern is consistent each time
768 an operation is performed. In this case a checksum can be used to
769 characterise the operation of a driver. The checksum can be compared
770 across different runs of the operation to verify that the driver is
771 working properly.
772
773 In particular, when performing major refactoring of the driver, where
774 the access pattern should not change, the checksum provides assurance
775 that the refactoring work has not broken the driver.
776
777 This works by sneaking into the io.h heder for an architecture and
778 redirecting I/O accesses through iotrace's tracing mechanism.
779
780 For now no commands are provided to examine the trace buffer. The
781 format is fairly simple, so 'md' is a reasonable substitute.
782
783 Note: The checksum feature is only useful for I/O regions where the
784 contents do not change outside of software control. Where this is not
785 suitable you can fall back to manually comparing the addresses. It
786 might be useful to enhance tracing to only checksum the accesses and
787 not the data read/written.
788
Simon Glass036bbb12017-08-04 16:34:28 -0600789config CMD_I2C
790 bool "i2c"
791 help
792 I2C support.
793
Simon Glass29499a02016-01-17 20:53:51 -0700794config CMD_LOADB
795 bool "loadb"
796 default y
797 help
798 Load a binary file over serial line.
799
800config CMD_LOADS
801 bool "loads"
802 default y
803 help
804 Load an S-Record file over serial line
805
Dinh Nguyen0685bef2016-04-21 09:05:23 -0500806config CMD_MMC
807 bool "mmc"
808 help
809 MMC memory mapped support.
810
Simon Glass29499a02016-01-17 20:53:51 -0700811config CMD_NAND
812 bool "nand"
Maxime Ripard5a5d71f2017-03-03 15:13:30 +0100813 default y if NAND_SUNXI
Simon Glass29499a02016-01-17 20:53:51 -0700814 help
815 NAND support.
816
Boris Brezillon19907782017-02-27 18:22:07 +0100817if CMD_NAND
818config CMD_NAND_TRIMFFS
819 bool "nand write.trimffs"
Hans de Goedefd42c052017-02-27 18:22:10 +0100820 default y if ARCH_SUNXI
Boris Brezillon19907782017-02-27 18:22:07 +0100821 help
822 Allows one to skip empty pages when flashing something on a NAND.
823
824config CMD_NAND_LOCK_UNLOCK
825 bool "nand lock/unlock"
826 help
827 NAND locking support.
828
829config CMD_NAND_TORTURE
830 bool "nand torture"
831 help
832 NAND torture support.
833
834endif # CMD_NAND
835
Zhikang Zhang49455652017-08-03 02:30:59 -0700836config CMD_NVME
837 bool "nvme"
838 depends on NVME
839 default y if NVME
840 help
841 NVM Express device support
842
Simon Glassdeb11672017-08-04 16:34:29 -0600843config CMD_MMC_SPI
844 bool "mmc_spi - Set up MMC SPI device"
845 help
846 Provides a way to set up an MMC (Multimedia Card) SPI (Serial
847 Peripheral Interface) device. The device provides a means of
848 accessing an MMC device via SPI using a single data line, limited
849 to 20MHz. It is useful since it reduces the amount of protocol code
850 required.
851
Simon Glassa2a82072017-08-04 16:34:31 -0600852config CMD_ONENAND
853 bool "onenand - access to onenand device"
854 help
855 OneNAND is a brand of NAND ('Not AND' gate) flash which provides
856 various useful features. This command allows reading, writing,
857 and erasing blocks. It allso provides a way to show and change
858 bad blocks, and test the device.
859
Patrick Delaunay73287092017-01-27 11:00:42 +0100860config CMD_PART
861 bool "part"
862 select PARTITION_UUIDS
Adam Fordb10ba902018-02-06 12:43:56 -0600863 select HAVE_BLOCK_DEVICE
Patrick Delaunay73287092017-01-27 11:00:42 +0100864 help
865 Read and display information about the partition table on
866 various media.
867
Simon Glassc88a09a2017-08-04 16:34:34 -0600868config CMD_PCI
869 bool "pci - Access PCI devices"
870 help
871 Provide access to PCI (Peripheral Interconnect Bus), a type of bus
872 used on some devices to allow the CPU to communicate with its
873 peripherals. Sub-commands allow bus enumeration, displaying and
874 changing configuration space and a few other features.
875
Simon Glassd677bef2017-08-04 16:34:37 -0600876config CMD_PCMCIA
877 bool "pinit - Set up PCMCIA device"
878 help
879 Provides a means to initialise a PCMCIA (Personal Computer Memory
880 Card International Association) device. This is an old standard from
881 about 1990. These devices are typically removable memory or network
882 cards using a standard 68-pin connector.
883
Simon Glassc05459b2017-08-04 16:34:39 -0600884config CMD_READ
885 bool "read - Read binary data from a partition"
886 help
887 Provides low-level access to the data in a partition.
888
Simon Glass036bbb12017-08-04 16:34:28 -0600889config CMD_REMOTEPROC
890 bool "remoteproc"
891 depends on REMOTEPROC
892 help
893 Support for Remote Processor control
894
895config CMD_SATA
896 bool "sata - Access SATA subsystem"
897 select SATA
898 help
899 SATA (Serial Advanced Technology Attachment) is a serial bus
900 standard for connecting to hard drives and other storage devices.
901 This command provides information about attached devices and allows
902 reading, writing and other operations.
903
904 SATA replaces PATA (originally just ATA), which stands for Parallel AT
905 Attachment, where AT refers to an IBM AT (Advanced Technology)
906 computer released in 1984.
907
Simon Glassd09f3772017-08-04 16:34:43 -0600908config CMD_SAVES
909 bool "saves - Save a file over serial in S-Record format"
910 help
911 Provides a way to save a binary file using the Motorola S-Record
912 format over the serial line.
913
Heinrich Schuchardta0f52832018-02-14 08:05:44 +0100914config CMD_SCSI
915 bool "scsi - Access to SCSI devices"
916 default y if SCSI
917 help
918 This provides a 'scsi' command which provides access to SCSI (Small
919 Computer System Interface) devices. The command provides a way to
920 scan the bus, reset the bus, read and write data and get information
921 about devices.
922
Simon Glass6870d2e2017-08-04 16:34:45 -0600923config CMD_SDRAM
924 bool "sdram - Print SDRAM configuration information"
925 help
926 Provides information about attached SDRAM. This assumed that the
927 SDRAM has an EEPROM with information that can be read using the
928 I2C bus. This is only available on some boards.
929
Simon Glass29499a02016-01-17 20:53:51 -0700930config CMD_SF
931 bool "sf"
932 help
933 SPI Flash support
934
Simon Glass86b1b652017-08-04 16:34:46 -0600935config CMD_SF_TEST
936 bool "sf test - Allow testing of SPI flash"
937 help
938 Provides a way to test that SPI flash is working correctly. The
939 test is destructive, in that an area of SPI flash must be provided
940 for the test to use. Performance information is also provided,
941 measuring the performance of reading, writing and erasing in
942 Mbps (Million Bits Per Second). This value should approximately
943 equal the SPI bus speed for a single-bit-wide SPI bus, assuming
944 everything is working properly.
945
Simon Glass29499a02016-01-17 20:53:51 -0700946config CMD_SPI
947 bool "sspi"
948 help
949 SPI utility command.
950
Simon Glass80a56cd2017-08-04 16:35:00 -0600951config CMD_TSI148
952 bool "tsi148 - Command to access tsi148 device"
953 help
954 This provides various sub-commands to initialise and configure the
955 Turndra tsi148 device. See the command help for full details.
956
Simon Glass0c03c1a2017-08-04 16:35:01 -0600957config CMD_UNIVERSE
958 bool "universe - Command to set up the Turndra Universe controller"
959 help
960 This allows setting up the VMEbus provided by this controller.
961 See the command help for full details.
962
Simon Glass29499a02016-01-17 20:53:51 -0700963config CMD_USB
964 bool "usb"
Adam Fordb10ba902018-02-06 12:43:56 -0600965 select HAVE_BLOCK_DEVICE
Simon Glass29499a02016-01-17 20:53:51 -0700966 help
967 USB support.
968
Stefan Agnerd9d661c2017-08-16 11:00:53 -0700969config CMD_USB_SDP
970 bool "sdp"
971 select USB_FUNCTION_SDP
972 help
973 Enables the command "sdp" which is used to have U-Boot emulating the
974 Serial Download Protocol (SDP) via USB.
Eddie Cai5e3020b2017-12-15 08:17:11 +0800975config CMD_ROCKUSB
976 bool "rockusb"
977 depends on USB_FUNCTION_ROCKUSB
978 help
979 Rockusb protocol is widely used by Rockchip SoC based devices. It can
980 read/write info, image to/from devices. This enable rockusb command
981 support to communication with rockusb device. for more detail about
982 this command, please read doc/README.rockusb.
Stefan Agnerd9d661c2017-08-16 11:00:53 -0700983
Dinh Nguyen0685bef2016-04-21 09:05:23 -0500984config CMD_USB_MASS_STORAGE
985 bool "UMS usb mass storage"
Lukasz Majewski6e782742018-01-29 19:28:02 +0100986 select USB_FUNCTION_MASS_STORAGE
Dinh Nguyen0685bef2016-04-21 09:05:23 -0500987 help
988 USB mass storage support
989
Simon Glass29499a02016-01-17 20:53:51 -0700990endmenu
991
992
993menu "Shell scripting commands"
994
995config CMD_ECHO
996 bool "echo"
997 default y
998 help
999 Echo args to console
1000
1001config CMD_ITEST
1002 bool "itest"
1003 default y
1004 help
1005 Return true/false on integer compare.
1006
1007config CMD_SOURCE
1008 bool "source"
1009 default y
1010 help
1011 Run script from memory
1012
1013config CMD_SETEXPR
1014 bool "setexpr"
1015 default y
1016 help
1017 Evaluate boolean and math expressions and store the result in an env
1018 variable.
1019 Also supports loading the value at a memory location into a variable.
1020 If CONFIG_REGEX is enabled, setexpr also supports a gsub function.
1021
1022endmenu
1023
Michal Simek2f785a12018-02-26 16:01:02 +01001024if NET
1025
Joe Hershbergerb0429462018-04-13 15:26:30 -05001026menuconfig CMD_NET
1027 bool "Network commands"
1028 default y
1029
1030if CMD_NET
1031
1032config CMD_BOOTP
1033 bool "bootp"
Simon Glass29499a02016-01-17 20:53:51 -07001034 default y
1035 help
Simon Glass29499a02016-01-17 20:53:51 -07001036 bootp - boot image via network using BOOTP/TFTP protocol
Joe Hershbergerb0429462018-04-13 15:26:30 -05001037
Joe Hershberger01261792018-04-13 15:26:33 -05001038config CMD_DHCP
1039 bool "dhcp"
1040 depends on CMD_BOOTP
1041 help
1042 Boot image via network using DHCP/TFTP protocol
1043
Joe Hershberger0824ad92018-04-13 15:26:32 -05001044config BOOTP_BOOTPATH
Joe Hershberger06661e12018-04-13 15:26:34 -05001045 bool "Request & store 'rootpath' from BOOTP/DHCP server"
Joe Hershberger0824ad92018-04-13 15:26:32 -05001046 depends on CMD_BOOTP
Joe Hershberger06661e12018-04-13 15:26:34 -05001047 help
1048 Even though the config is called BOOTP_BOOTPATH, it stores the
1049 path in the variable 'rootpath'.
Joe Hershberger0824ad92018-04-13 15:26:32 -05001050
1051config BOOTP_DNS
Joe Hershberger06661e12018-04-13 15:26:34 -05001052 bool "Request & store 'dnsip' from BOOTP/DHCP server"
Joe Hershberger0824ad92018-04-13 15:26:32 -05001053 depends on CMD_BOOTP
Joe Hershberger06661e12018-04-13 15:26:34 -05001054 help
1055 The primary DNS server is stored as 'dnsip'. If two servers are
1056 returned, you must set BOOTP_DNS2 to store that second server IP
1057 also.
Joe Hershberger0824ad92018-04-13 15:26:32 -05001058
Joe Hershberger63e70712018-04-13 15:26:35 -05001059config BOOTP_DNS2
1060 bool "Store 'dnsip2' from BOOTP/DHCP server"
1061 depends on BOOTP_DNS
1062 help
1063 If a DHCP client requests the DNS server IP from a DHCP server,
1064 it is possible that more than one DNS serverip is offered to the
1065 client. If CONFIG_BOOTP_DNS2 is enabled, the secondary DNS
1066 server IP will be stored in the additional environment
1067 variable "dnsip2". The first DNS serverip is always
1068 stored in the variable "dnsip", when BOOTP_DNS is defined.
1069
Joe Hershberger0824ad92018-04-13 15:26:32 -05001070config BOOTP_GATEWAY
Joe Hershberger06661e12018-04-13 15:26:34 -05001071 bool "Request & store 'gatewayip' from BOOTP/DHCP server"
Joe Hershberger0824ad92018-04-13 15:26:32 -05001072 depends on CMD_BOOTP
1073
1074config BOOTP_HOSTNAME
Joe Hershberger06661e12018-04-13 15:26:34 -05001075 bool "Request & store 'hostname' from BOOTP/DHCP server"
Joe Hershberger0824ad92018-04-13 15:26:32 -05001076 depends on CMD_BOOTP
Joe Hershberger06661e12018-04-13 15:26:34 -05001077 help
1078 The name may or may not be qualified with the local domain name.
Joe Hershberger0824ad92018-04-13 15:26:32 -05001079
1080config BOOTP_SUBNETMASK
Joe Hershberger06661e12018-04-13 15:26:34 -05001081 bool "Request & store 'netmask' from BOOTP/DHCP server"
Joe Hershberger0824ad92018-04-13 15:26:32 -05001082 depends on CMD_BOOTP
1083
1084config BOOTP_PXE
1085 bool "Enable BOOTP PXE"
1086 depends on CMD_BOOTP
1087
1088config BOOTP_PXE_CLIENTARCH
1089 hex
1090 depends on CMD_BOOTP
1091 default 0x16 if ARM64
1092 default 0x15 if ARM
1093 default 0 if X86
1094
1095config BOOTP_VCI_STRING
1096 string
1097 depends on CMD_BOOTP
1098 default "U-Boot.armv7" if CPU_V7 || CPU_V7M
1099 default "U-Boot.armv8" if ARM64
1100 default "U-Boot.arm" if ARM
1101 default "U-Boot"
1102
Joe Hershbergerb0429462018-04-13 15:26:30 -05001103config CMD_TFTPBOOT
1104 bool "tftpboot"
1105 default y
1106 help
Simon Glass29499a02016-01-17 20:53:51 -07001107 tftpboot - boot image via network using TFTP protocol
1108
1109config CMD_TFTPPUT
1110 bool "tftp put"
Joe Hershbergerb0429462018-04-13 15:26:30 -05001111 depends on CMD_TFTPBOOT
Simon Glass29499a02016-01-17 20:53:51 -07001112 help
1113 TFTP put command, for uploading files to a server
1114
1115config CMD_TFTPSRV
1116 bool "tftpsrv"
Joe Hershbergerb0429462018-04-13 15:26:30 -05001117 depends on CMD_TFTPBOOT
Simon Glass29499a02016-01-17 20:53:51 -07001118 help
1119 Act as a TFTP server and boot the first received file
1120
Joe Hershberger0824ad92018-04-13 15:26:32 -05001121config NET_TFTP_VARS
1122 bool "Control TFTP timeout and count through environment"
1123 depends on CMD_TFTPBOOT
1124 default y
1125 help
1126 If set, allows controlling the TFTP timeout through the
1127 environment variable tftptimeout, and the TFTP maximum
1128 timeout count through the variable tftptimeoutcountmax.
1129 If unset, timeout and maximum are hard-defined as 1 second
1130 and 10 timouts per TFTP transfer.
1131
Simon Glass29499a02016-01-17 20:53:51 -07001132config CMD_RARP
1133 bool "rarpboot"
1134 help
1135 Boot image via network using RARP/TFTP protocol
1136
Simon Glass29499a02016-01-17 20:53:51 -07001137config CMD_NFS
1138 bool "nfs"
1139 default y
1140 help
1141 Boot image via network using NFS protocol.
1142
Dinh Nguyen0685bef2016-04-21 09:05:23 -05001143config CMD_MII
1144 bool "mii"
1145 help
1146 Enable MII utility commands.
1147
Simon Glass29499a02016-01-17 20:53:51 -07001148config CMD_PING
1149 bool "ping"
1150 help
1151 Send ICMP ECHO_REQUEST to network host
1152
1153config CMD_CDP
1154 bool "cdp"
1155 help
1156 Perform CDP network configuration
1157
1158config CMD_SNTP
1159 bool "sntp"
1160 help
1161 Synchronize RTC via network
1162
1163config CMD_DNS
1164 bool "dns"
1165 help
1166 Lookup the IP of a hostname
1167
1168config CMD_LINK_LOCAL
1169 bool "linklocal"
1170 help
1171 Acquire a network IP address using the link-local protocol
1172
Joe Hershberger0824ad92018-04-13 15:26:32 -05001173endif
1174
Simon Glass12b85702017-05-17 03:25:17 -06001175config CMD_ETHSW
1176 bool "ethsw"
1177 help
1178 Allow control of L2 Ethernet switch commands. These are supported
1179 by the vsc9953 Ethernet driver at present. Sub-commands allow
1180 operations such as enabling / disabling a port and
1181 viewing/maintaining the filtering database (FDB)
1182
Joe Hershberger0824ad92018-04-13 15:26:32 -05001183config CMD_PXE
1184 bool "pxe"
1185 select MENU
1186 help
1187 Boot image via network using PXE protocol
Michal Simek2f785a12018-02-26 16:01:02 +01001188
Joe Hershbergerb0429462018-04-13 15:26:30 -05001189endif
Simon Glass29499a02016-01-17 20:53:51 -07001190
1191menu "Misc commands"
1192
Simon Glassb575bfc2017-04-26 22:27:55 -06001193config CMD_BMP
1194 bool "Enable 'bmp' command"
1195 depends on LCD || DM_VIDEO || VIDEO
1196 help
1197 This provides a way to obtain information about a BMP-format iamge
1198 and to display it. BMP (which presumably stands for BitMaP) is a
1199 file format defined by Microsoft which supports images of various
1200 depths, formats and compression methods. Headers on the file
1201 determine the formats used. This command can be used by first loading
1202 the image into RAM, then using this command to look at it or display
1203 it.
1204
Simon Glassffab9a02017-04-26 22:27:56 -06001205config CMD_BSP
1206 bool "Enable board-specific commands"
1207 help
1208 (deprecated: instead, please define a Kconfig option for each command)
1209
1210 Some boards have board-specific commands which are only enabled
1211 during developemnt and need to be turned off for production. This
1212 option provides a way to control this. The commands that are enabled
1213 vary depending on the board.
1214
Tomas Melinc17dae52016-11-25 11:01:03 +02001215config CMD_BKOPS_ENABLE
1216 bool "mmc bkops enable"
1217 depends on CMD_MMC
1218 default n
1219 help
1220 Enable command for setting manual background operations handshake
1221 on a eMMC device. The feature is optionally available on eMMC devices
1222 conforming to standard >= 4.41.
1223
Eric Nelsonfaf4f052016-03-28 10:05:44 -07001224config CMD_BLOCK_CACHE
1225 bool "blkcache - control and stats for block cache"
1226 depends on BLOCK_CACHE
1227 default y if BLOCK_CACHE
1228 help
1229 Enable the blkcache command, which can be used to control the
1230 operation of the cache functions.
1231 This is most useful when fine-tuning the operation of the cache
1232 during development, but also allows the cache to be disabled when
1233 it might hurt performance (e.g. when using the ums command).
1234
Dinh Nguyen0685bef2016-04-21 09:05:23 -05001235config CMD_CACHE
1236 bool "icache or dcache"
1237 help
1238 Enable the "icache" and "dcache" commands
1239
Simon Glass0a6d8e62017-04-26 22:28:09 -06001240config CMD_DISPLAY
1241 bool "Enable the 'display' command, for character displays"
1242 help
1243 (this needs porting to driver model)
1244 This enables the 'display' command which allows a string to be
1245 displayed on a simple board-specific display. Implement
1246 display_putc() to use it.
1247
Simon Glassfc8a5292017-04-10 11:34:59 -06001248config CMD_LED
1249 bool "led"
1250 default y if LED
1251 help
1252 Enable the 'led' command which allows for control of LEDs supported
1253 by the board. The LEDs can be listed with 'led list' and controlled
1254 with led on/off/togle/blink. Any LED drivers can be controlled with
1255 this command, e.g. led_gpio.
1256
Chris Packham3e257df2017-04-29 15:20:28 +12001257config CMD_DATE
1258 bool "date"
1259 default y if DM_RTC
1260 help
1261 Enable the 'date' command for getting/setting the time/date in RTC
1262 devices.
1263
Simon Glass29499a02016-01-17 20:53:51 -07001264config CMD_TIME
1265 bool "time"
1266 help
1267 Run commands and summarize execution time.
1268
Simon Glassfa744522017-05-17 03:25:23 -06001269config CMD_GETTIME
1270 bool "gettime - read elapsed time"
1271 help
1272 Enable the 'gettime' command which reads the elapsed time since
1273 U-Boot started running. This shows the time in seconds and
1274 milliseconds. See also the 'bootstage' command which provides more
1275 flexibility for boot timing.
1276
Simon Glass29499a02016-01-17 20:53:51 -07001277# TODO: rename to CMD_SLEEP
1278config CMD_MISC
1279 bool "sleep"
1280 default y
1281 help
1282 Delay execution for some time
1283
1284config CMD_TIMER
1285 bool "timer"
1286 help
1287 Access the system timer.
1288
Simon Glass29499a02016-01-17 20:53:51 -07001289config CMD_SOUND
1290 bool "sound"
1291 depends on SOUND
1292 help
1293 This provides basic access to the U-Boot's sound support. The main
1294 feature is to play a beep.
1295
1296 sound init - set up sound system
1297 sound play - play a sound
1298
Miao Yan92106272016-05-22 19:37:17 -07001299config CMD_QFW
Tom Rinibcb3c8d2016-05-06 10:40:22 -04001300 bool "qfw"
Miao Yan4fcd7f22016-05-22 19:37:14 -07001301 select QFW
Tom Rinibcb3c8d2016-05-06 10:40:22 -04001302 help
1303 This provides access to the QEMU firmware interface. The main
1304 feature is to allow easy loading of files passed to qemu-system
1305 via -kernel / -initrd
Konstantin Porotchkin97d26782016-12-08 12:22:28 +02001306
1307source "cmd/mvebu/Kconfig"
1308
Simon Glass89342ef2017-08-04 16:34:55 -06001309config CMD_TERMINAL
1310 bool "terminal - provides a way to attach a serial terminal"
1311 help
1312 Provides a 'cu'-like serial terminal command. This can be used to
1313 access other serial ports from the system console. The terminal
1314 is very simple with no special processing of characters. As with
1315 cu, you can press ~. (tilde followed by period) to exit.
1316
Simon Glass6d56aad2017-08-04 16:35:02 -06001317config CMD_UUID
1318 bool "uuid, guid - generation of unique IDs"
Adam Ford70c8f052018-02-06 12:14:28 -06001319 select LIB_UUID
Simon Glass6d56aad2017-08-04 16:35:02 -06001320 help
1321 This enables two commands:
1322
1323 uuid - generate random Universally Unique Identifier
1324 guid - generate Globally Unique Identifier based on random UUID
1325
1326 The two commands are very similar except for the endianness of the
1327 output.
1328
Simon Glass29499a02016-01-17 20:53:51 -07001329endmenu
1330
Lokesh Vutla962c4e02017-12-29 11:47:49 +05301331source "cmd/ti/Kconfig"
1332
Simon Glass29499a02016-01-17 20:53:51 -07001333config CMD_BOOTSTAGE
1334 bool "Enable the 'bootstage' command"
1335 depends on BOOTSTAGE
1336 help
1337 Add a 'bootstage' command which supports printing a report
1338 and un/stashing of bootstage data.
1339
1340menu "Power commands"
1341config CMD_PMIC
1342 bool "Enable Driver Model PMIC command"
1343 depends on DM_PMIC
1344 help
1345 This is the pmic command, based on a driver model pmic's API.
1346 Command features are unchanged:
1347 - list - list pmic devices
1348 - pmic dev <id> - show or [set] operating pmic device (NEW)
1349 - pmic dump - dump registers
1350 - pmic read address - read byte of register at address
1351 - pmic write address - write byte to register at address
1352 The only one change for this command is 'dev' subcommand.
1353
1354config CMD_REGULATOR
1355 bool "Enable Driver Model REGULATOR command"
1356 depends on DM_REGULATOR
1357 help
1358 This command is based on driver model regulator's API.
1359 User interface features:
1360 - list - list regulator devices
1361 - regulator dev <id> - show or [set] operating regulator device
1362 - regulator info - print constraints info
1363 - regulator status - print operating status
1364 - regulator value <val] <-f> - print/[set] voltage value [uV]
1365 - regulator current <val> - print/[set] current value [uA]
1366 - regulator mode <id> - print/[set] operating mode id
1367 - regulator enable - enable the regulator output
1368 - regulator disable - disable the regulator output
1369
1370 The '-f' (force) option can be used for set the value which exceeds
1371 the limits, which are found in device-tree and are kept in regulator's
1372 uclass platdata structure.
1373
1374endmenu
1375
1376menu "Security commands"
Simon Glass528fdd12017-04-26 22:27:49 -06001377config CMD_AES
1378 bool "Enable the 'aes' command"
1379 select AES
1380 help
1381 This provides a means to encrypt and decrypt data using the AES
1382 (Advanced Encryption Standard). This algorithm uses a symetric key
1383 and is widely used as a streaming cipher. Different key lengths are
1384 supported by the algorithm but this command only supports 128 bits
1385 at present.
1386
Simon Glass311ec4f2017-04-26 22:27:53 -06001387config CMD_BLOB
1388 bool "Enable the 'blob' command"
1389 help
1390 This is used with the Freescale secure boot mechanism.
1391
1392 Freescale's SEC block has built-in Blob Protocol which provides
1393 a method for protecting user-defined data across system power
1394 cycles. SEC block protects data in a data structure called a Blob,
1395 which provides both confidentiality and integrity protection.
1396
1397 Encapsulating data as a blob
1398 Each time that the Blob Protocol is used to protect data, a
1399 different randomly generated key is used to encrypt the data.
1400 This random key is itself encrypted using a key which is derived
1401 from SoC's non-volatile secret key and a 16 bit Key identifier.
1402 The resulting encrypted key along with encrypted data is called a
1403 blob. The non-volatile secure key is available for use only during
1404 secure boot.
1405
1406 During decapsulation, the reverse process is performed to get back
1407 the original data.
1408
1409 Sub-commands:
1410 blob enc - encapsulating data as a cryptgraphic blob
1411 blob dec - decapsulating cryptgraphic blob to get the data
1412
1413 Syntax:
1414
1415 blob enc src dst len km
1416
1417 Encapsulate and create blob of data $len bytes long
1418 at address $src and store the result at address $dst.
1419 $km is the 16 byte key modifier is also required for
1420 generation/use as key for cryptographic operation. Key
1421 modifier should be 16 byte long.
1422
1423 blob dec src dst len km
1424
1425 Decapsulate the blob of data at address $src and
1426 store result of $len byte at addr $dst.
1427 $km is the 16 byte key modifier is also required for
1428 generation/use as key for cryptographic operation. Key
1429 modifier should be 16 byte long.
1430
Simon Glass027608e2017-05-17 03:25:25 -06001431config CMD_HASH
1432 bool "Support 'hash' command"
Simon Glassb22ec7a2017-05-17 09:05:34 -06001433 select HASH
Simon Glass027608e2017-05-17 03:25:25 -06001434 help
1435 This provides a way to hash data in memory using various supported
1436 algorithms (such as SHA1, MD5, CRC32). The computed digest can be
1437 saved to memory or to an environment variable. It is also possible
1438 to verify a hash against data in memory.
1439
Daniel Thompsona9e2c672017-05-19 17:26:58 +01001440config HASH_VERIFY
1441 bool "hash -v"
1442 depends on CMD_HASH
1443 help
1444 Add -v option to verify data against a hash.
1445
Simon Glass29499a02016-01-17 20:53:51 -07001446config CMD_TPM
1447 bool "Enable the 'tpm' command"
1448 depends on TPM
1449 help
1450 This provides a means to talk to a TPM from the command line. A wide
1451 range of commands if provided - see 'tpm help' for details. The
1452 command requires a suitable TPM on your board and the correct driver
1453 must be enabled.
1454
1455config CMD_TPM_TEST
1456 bool "Enable the 'tpm test' command"
1457 depends on CMD_TPM
1458 help
1459 This provides a a series of tests to confirm that the TPM is working
1460 correctly. The tests cover initialisation, non-volatile RAM, extend,
1461 global lock and checking that timing is within expectations. The
1462 tests pass correctly on Infineon TPMs but may need to be adjusted
1463 for other devices.
1464
1465endmenu
1466
Moritz Fischer62b30272016-10-04 17:08:08 -07001467menu "Firmware commands"
1468config CMD_CROS_EC
1469 bool "Enable crosec command"
1470 depends on CROS_EC
1471 default y
1472 help
1473 Enable command-line access to the Chrome OS EC (Embedded
1474 Controller). This provides the 'crosec' command which has
1475 a number of sub-commands for performing EC tasks such as
1476 updating its flash, accessing a small saved context area
1477 and talking to the I2C bus behind the EC (if there is one).
1478endmenu
1479
Dinh Nguyen0685bef2016-04-21 09:05:23 -05001480menu "Filesystem commands"
Marek Behún27cec792017-09-03 17:00:30 +02001481config CMD_BTRFS
1482 bool "Enable the 'btrsubvol' command"
1483 select FS_BTRFS
1484 help
1485 This enables the 'btrsubvol' command to list subvolumes
1486 of a BTRFS filesystem. There are no special commands for
1487 listing BTRFS directories or loading BTRFS files - this
1488 can be done by the generic 'fs' commands (see CMD_FS_GENERIC)
1489 when BTRFS is enabled (see FS_BTRFS).
1490
Simon Glass0501e3e2017-04-26 22:27:58 -06001491config CMD_CBFS
1492 bool "Enable the 'cbfs' command"
Simon Glass579b51a2017-04-26 22:27:59 -06001493 depends on FS_CBFS
Simon Glass0501e3e2017-04-26 22:27:58 -06001494 help
1495 Define this to enable support for reading from a Coreboot
1496 filesystem. This is a ROM-based filesystem used for accessing files
1497 on systems that use coreboot as the first boot-loader and then load
1498 U-Boot to actually boot the Operating System. Available commands are
1499 cbfsinit, cbfsinfo, cbfsls and cbfsload.
1500
Simon Glass519805e2017-04-26 22:28:03 -06001501config CMD_CRAMFS
1502 bool "Enable the 'cramfs' command"
Simon Glass690f5092017-04-26 22:28:04 -06001503 depends on FS_CRAMFS
Simon Glass519805e2017-04-26 22:28:03 -06001504 help
1505 This provides commands for dealing with CRAMFS (Compressed ROM
1506 filesystem). CRAMFS is useful when space is tight since files are
1507 compressed. Two commands are provided:
1508
1509 cramfsls - lists files in a cramfs image
1510 cramfsload - loads a file from a cramfs image
1511
Dinh Nguyen0685bef2016-04-21 09:05:23 -05001512config CMD_EXT2
1513 bool "ext2 command support"
Tuomas Tynkkynen388f9a02018-01-05 02:45:17 +02001514 select FS_EXT4
Dinh Nguyen0685bef2016-04-21 09:05:23 -05001515 help
1516 Enables EXT2 FS command
1517
1518config CMD_EXT4
1519 bool "ext4 command support"
Tuomas Tynkkynen388f9a02018-01-05 02:45:17 +02001520 select FS_EXT4
Dinh Nguyen0685bef2016-04-21 09:05:23 -05001521 help
1522 Enables EXT4 FS command
1523
1524config CMD_EXT4_WRITE
1525 depends on CMD_EXT4
1526 bool "ext4 write command support"
Tuomas Tynkkynen388f9a02018-01-05 02:45:17 +02001527 select EXT4_WRITE
Dinh Nguyen0685bef2016-04-21 09:05:23 -05001528 help
1529 Enables EXT4 FS write command
1530
1531config CMD_FAT
1532 bool "FAT command support"
Sekhar Nori1909a7b2017-06-02 17:53:59 +05301533 select FS_FAT
Dinh Nguyen0685bef2016-04-21 09:05:23 -05001534 help
1535 Support for the FAT fs
1536
1537config CMD_FS_GENERIC
1538 bool "filesystem commands"
1539 help
1540 Enables filesystem commands (e.g. load, ls) that work for multiple
1541 fs types.
Maxime Ripardbf2fbd12017-02-27 18:22:04 +01001542
Josua Mayerf5ebfe72017-04-24 10:10:45 +02001543config CMD_FS_UUID
1544 bool "fsuuid command"
1545 help
1546 Enables fsuuid command for filesystem UUID.
1547
Simon Glassc4abb4b2017-05-17 03:25:37 -06001548config CMD_JFFS2
1549 bool "jffs2 command"
Simon Glass8c6c7c22017-05-17 03:25:38 -06001550 select FS_JFFS2
Simon Glassc4abb4b2017-05-17 03:25:37 -06001551 help
1552 Enables commands to support the JFFS2 (Journalling Flash File System
1553 version 2) filesystem. This enables fsload, ls and fsinfo which
1554 provide the ability to load files, list directories and obtain
1555 filesystem information.
1556
Maxime Ripardbf2fbd12017-02-27 18:22:04 +01001557config CMD_MTDPARTS
Maxime Ripardbf2fbd12017-02-27 18:22:04 +01001558 bool "MTD partition support"
1559 help
1560 MTD partition support
1561
1562config MTDIDS_DEFAULT
1563 string "Default MTD IDs"
Tom Rini5ad8e112017-10-22 17:55:07 -04001564 depends on CMD_MTDPARTS || CMD_NAND || CMD_FLASH
Maxime Ripardbf2fbd12017-02-27 18:22:04 +01001565 help
Tom Rini5ad8e112017-10-22 17:55:07 -04001566 Defines a default MTD IDs list for use with MTD partitions in the
1567 Linux MTD command line partitions format.
Maxime Ripardbf2fbd12017-02-27 18:22:04 +01001568
1569config MTDPARTS_DEFAULT
1570 string "Default MTD partition scheme"
Tom Rini5ad8e112017-10-22 17:55:07 -04001571 depends on CMD_MTDPARTS || CMD_NAND || CMD_FLASH
Maxime Ripardbf2fbd12017-02-27 18:22:04 +01001572 help
1573 Defines a default MTD partitioning scheme in the Linux MTD command
1574 line partitions format
1575
Simon Glass66d7db02017-08-04 16:34:30 -06001576config CMD_MTDPARTS_SPREAD
1577 bool "Padd partition size to take account of bad blocks"
1578 depends on CMD_MTDPARTS
1579 help
1580 This enables the 'spread' sub-command of the mtdparts command.
1581 This command will modify the existing mtdparts variable by increasing
1582 the size of the partitions such that 1) each partition's net size is
1583 at least as large as the size specified in the mtdparts variable and
1584 2) each partition starts on a good block.
1585
Simon Glassed4ee312017-08-04 16:34:41 -06001586config CMD_REISER
1587 bool "reiser - Access to reiserfs filesystems"
1588 help
1589 This provides two commands which operate on a resierfs filesystem,
1590 commonly used some years ago:
1591
1592 reiserls - list files
1593 reiserload - load a file
1594
Simon Glass19c5caf2017-08-04 16:34:58 -06001595config CMD_YAFFS2
1596 bool "yaffs2 - Access of YAFFS2 filesystem"
1597 depends on YAFFS2
1598 default y
1599 help
1600 This provides commands for accessing a YAFFS2 filesystem. Yet
1601 Another Flash Filesystem 2 is a filesystem designed specifically
1602 for NAND flash. It incorporates bad-block management and ensures
1603 that device writes are sequential regardless of filesystem
1604 activity.
1605
Simon Glassdc82dee2017-08-04 16:35:04 -06001606config CMD_ZFS
1607 bool "zfs - Access of ZFS filesystem"
1608 help
1609 This provides commands to accessing a ZFS filesystem, commonly used
1610 on Solaris systems. Two sub-commands are provided:
1611
1612 zfsls - list files in a directory
1613 zfsload - load a file
1614
1615 See doc/README.zfs for more details.
1616
Dinh Nguyen0685bef2016-04-21 09:05:23 -05001617endmenu
1618
Simon Glass3423f212017-04-26 22:27:52 -06001619menu "Debug commands"
1620
1621config CMD_BEDBUG
1622 bool "bedbug"
1623 help
1624 The bedbug (emBEDded deBUGger) command provides debugging features
1625 for some PowerPC processors. For details please see the
1626 docuemntation in doc/README.beddbug
1627
Simon Glass20ea5632017-04-26 22:28:08 -06001628config CMD_DIAG
1629 bool "diag - Board diagnostics"
1630 help
1631 This command provides access to board diagnostic tests. These are
1632 called Power-on Self Tests (POST). The command allows listing of
1633 available tests and running either all the tests, or specific tests
1634 identified by name.
1635
Simon Glass4c3a6202017-05-17 03:25:39 -06001636config CMD_IRQ
1637 bool "irq - Show information about interrupts"
Heiko Schocher6f90e582017-06-14 05:49:40 +02001638 depends on !ARM && !MIPS && !SH
Simon Glass4c3a6202017-05-17 03:25:39 -06001639 help
1640 This enables two commands:
1641
1642 interrupts - enable or disable interrupts
1643 irqinfo - print device-specific interrupt information
Simon Glassfd9948c2017-05-17 03:25:40 -06001644
1645config CMD_KGDB
1646 bool "kgdb - Allow debugging of U-Boot with gdb"
1647 help
1648 This enables a 'kgdb' command which allows gdb to connect to U-Boot
1649 over a serial link for debugging purposes. This allows
1650 single-stepping, inspecting variables, etc. This is supported only
1651 on PowerPC at present.
1652
Simon Glass5684f8f2017-12-04 13:48:26 -07001653config CMD_LOG
1654 bool "log - Generation, control and access to logging"
1655 help
1656 This provides access to logging features. It allows the output of
1657 log data to be controlled to a limited extent (setting up the default
Simon Glass14c8a062017-12-04 13:48:27 -07001658 maximum log level for emitting of records). It also provides access
1659 to a command used for testing the log system.
Simon Glass5684f8f2017-12-04 13:48:26 -07001660
Simon Glass126cb792017-08-04 16:34:59 -06001661config CMD_TRACE
1662 bool "trace - Support tracing of function calls and timing"
1663 help
1664 Enables a command to control using of function tracing within
1665 U-Boot. This allows recording of call traces including timing
1666 information. The command can write data to memory for exporting
1667 for analsys (e.g. using bootchart). See doc/README.trace for full
1668 details.
1669
Simon Glass3423f212017-04-26 22:27:52 -06001670endmenu
1671
Heiko Schocher09dbb852016-09-21 07:58:19 +02001672config CMD_UBI
1673 tristate "Enable UBI - Unsorted block images commands"
1674 select CRC32
1675 select MTD_UBI
Karl Beldan4b239cf2017-07-12 16:11:46 +00001676 select CMD_MTDPARTS
Maxime Ripard5a5d71f2017-03-03 15:13:30 +01001677 default y if NAND_SUNXI
Heiko Schocher09dbb852016-09-21 07:58:19 +02001678 help
1679 UBI is a software layer above MTD layer which admits use of LVM-like
1680 logical volumes on top of MTD devices, hides some complexities of
1681 flash chips like wear and bad blocks and provides some other useful
1682 capabilities. Please, consult the MTD web site for more details
1683 (www.linux-mtd.infradead.org). Activate this option if you want
1684 to use U-Boot UBI commands.
1685
Boris Brezillonaa57d0f2017-02-27 18:22:06 +01001686config CMD_UBIFS
1687 tristate "Enable UBIFS - Unsorted block images filesystem commands"
Maxime Ripard1e6a0962017-03-03 14:53:22 +01001688 depends on CMD_UBI
Boris Brezillonaa57d0f2017-02-27 18:22:06 +01001689 select CRC32
Karl Beldan3418eeb2017-07-12 16:11:47 +00001690 select LZO
Tom Rinic20bb732017-07-22 18:36:16 -04001691 default y if CMD_UBI
Boris Brezillonaa57d0f2017-02-27 18:22:06 +01001692 help
1693 UBIFS is a file system for flash devices which works on top of UBI.
1694
Simon Glass29499a02016-01-17 20:53:51 -07001695endmenu