rev13@wp.pl | fec465a | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2011 |
| 3 | * Yuri Tikhonov, Emcraft Systems, yur@emcraft.com |
| 4 | * |
| 5 | * (C) Copyright 2015 |
Kamil Lulko | decd33b | 2015-11-29 11:50:53 +0100 | [diff] [blame] | 6 | * Kamil Lulko, <kamil.lulko@gmail.com> |
rev13@wp.pl | fec465a | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 7 | * |
Matt Porter | 359919a | 2015-05-05 15:00:25 -0400 | [diff] [blame] | 8 | * Copyright 2015 ATS Advanced Telematics Systems GmbH |
| 9 | * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com> |
| 10 | * |
rev13@wp.pl | fec465a | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 11 | * SPDX-License-Identifier: GPL-2.0+ |
| 12 | */ |
| 13 | |
| 14 | #include <common.h> |
| 15 | #include <asm/io.h> |
Masahiro Yamada | 56a931c | 2016-09-21 11:28:55 +0900 | [diff] [blame] | 16 | #include <linux/errno.h> |
rev13@wp.pl | fec465a | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 17 | #include <asm/arch/stm32.h> |
| 18 | #include <asm/arch/gpio.h> |
| 19 | |
| 20 | DECLARE_GLOBAL_DATA_PTR; |
| 21 | |
Vikas Manocha | 1b51c93 | 2016-02-11 15:47:20 -0800 | [diff] [blame] | 22 | #if defined(CONFIG_STM32F4) || defined(CONFIG_STM32F7) |
rev13@wp.pl | fec465a | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 23 | static const unsigned long io_base[] = { |
| 24 | STM32_GPIOA_BASE, STM32_GPIOB_BASE, STM32_GPIOC_BASE, |
| 25 | STM32_GPIOD_BASE, STM32_GPIOE_BASE, STM32_GPIOF_BASE, |
| 26 | STM32_GPIOG_BASE, STM32_GPIOH_BASE, STM32_GPIOI_BASE |
| 27 | }; |
| 28 | |
| 29 | struct stm32_gpio_regs { |
| 30 | u32 moder; /* GPIO port mode */ |
| 31 | u32 otyper; /* GPIO port output type */ |
| 32 | u32 ospeedr; /* GPIO port output speed */ |
| 33 | u32 pupdr; /* GPIO port pull-up/pull-down */ |
| 34 | u32 idr; /* GPIO port input data */ |
| 35 | u32 odr; /* GPIO port output data */ |
| 36 | u32 bsrr; /* GPIO port bit set/reset */ |
| 37 | u32 lckr; /* GPIO port configuration lock */ |
| 38 | u32 afr[2]; /* GPIO alternate function */ |
| 39 | }; |
| 40 | |
| 41 | #define CHECK_DSC(x) (!x || x->port > 8 || x->pin > 15) |
| 42 | #define CHECK_CTL(x) (!x || x->af > 15 || x->mode > 3 || x->otype > 1 || \ |
| 43 | x->pupd > 2 || x->speed > 3) |
| 44 | |
| 45 | int stm32_gpio_config(const struct stm32_gpio_dsc *dsc, |
| 46 | const struct stm32_gpio_ctl *ctl) |
| 47 | { |
| 48 | struct stm32_gpio_regs *gpio_regs; |
| 49 | u32 i; |
| 50 | int rv; |
| 51 | |
| 52 | if (CHECK_DSC(dsc)) { |
| 53 | rv = -EINVAL; |
| 54 | goto out; |
| 55 | } |
| 56 | if (CHECK_CTL(ctl)) { |
| 57 | rv = -EINVAL; |
| 58 | goto out; |
| 59 | } |
| 60 | |
| 61 | gpio_regs = (struct stm32_gpio_regs *)io_base[dsc->port]; |
| 62 | |
rev13@wp.pl | fec465a | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 63 | i = (dsc->pin & 0x07) * 4; |
Axel Lin | 3e59f9e | 2015-04-26 10:32:36 +0800 | [diff] [blame] | 64 | clrsetbits_le32(&gpio_regs->afr[dsc->pin >> 3], 0xF << i, ctl->af << i); |
rev13@wp.pl | fec465a | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 65 | |
| 66 | i = dsc->pin * 2; |
| 67 | |
Axel Lin | 3e59f9e | 2015-04-26 10:32:36 +0800 | [diff] [blame] | 68 | clrsetbits_le32(&gpio_regs->moder, 0x3 << i, ctl->mode << i); |
| 69 | clrsetbits_le32(&gpio_regs->otyper, 0x3 << i, ctl->otype << i); |
| 70 | clrsetbits_le32(&gpio_regs->ospeedr, 0x3 << i, ctl->speed << i); |
| 71 | clrsetbits_le32(&gpio_regs->pupdr, 0x3 << i, ctl->pupd << i); |
rev13@wp.pl | fec465a | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 72 | |
| 73 | rv = 0; |
| 74 | out: |
| 75 | return rv; |
| 76 | } |
Matt Porter | 359919a | 2015-05-05 15:00:25 -0400 | [diff] [blame] | 77 | #elif defined(CONFIG_STM32F1) |
Matt Porter | 359919a | 2015-05-05 15:00:25 -0400 | [diff] [blame] | 78 | static const unsigned long io_base[] = { |
| 79 | STM32_GPIOA_BASE, STM32_GPIOB_BASE, STM32_GPIOC_BASE, |
| 80 | STM32_GPIOD_BASE, STM32_GPIOE_BASE, STM32_GPIOF_BASE, |
| 81 | STM32_GPIOG_BASE |
| 82 | }; |
| 83 | |
| 84 | #define STM32_GPIO_CR_MODE_MASK 0x3 |
| 85 | #define STM32_GPIO_CR_MODE_SHIFT(p) (p * 4) |
| 86 | #define STM32_GPIO_CR_CNF_MASK 0x3 |
| 87 | #define STM32_GPIO_CR_CNF_SHIFT(p) (p * 4 + 2) |
| 88 | |
| 89 | struct stm32_gpio_regs { |
| 90 | u32 crl; /* GPIO port configuration low */ |
| 91 | u32 crh; /* GPIO port configuration high */ |
| 92 | u32 idr; /* GPIO port input data */ |
| 93 | u32 odr; /* GPIO port output data */ |
| 94 | u32 bsrr; /* GPIO port bit set/reset */ |
| 95 | u32 brr; /* GPIO port bit reset */ |
| 96 | u32 lckr; /* GPIO port configuration lock */ |
| 97 | }; |
| 98 | |
| 99 | #define CHECK_DSC(x) (!x || x->port > 6 || x->pin > 15) |
| 100 | #define CHECK_CTL(x) (!x || x->mode > 3 || x->icnf > 3 || x->ocnf > 3 || \ |
| 101 | x->pupd > 1) |
| 102 | |
| 103 | int stm32_gpio_config(const struct stm32_gpio_dsc *dsc, |
| 104 | const struct stm32_gpio_ctl *ctl) |
| 105 | { |
| 106 | struct stm32_gpio_regs *gpio_regs; |
| 107 | u32 *cr; |
| 108 | int p, crp; |
| 109 | int rv; |
| 110 | |
| 111 | if (CHECK_DSC(dsc)) { |
| 112 | rv = -EINVAL; |
| 113 | goto out; |
| 114 | } |
| 115 | if (CHECK_CTL(ctl)) { |
| 116 | rv = -EINVAL; |
| 117 | goto out; |
| 118 | } |
| 119 | |
| 120 | p = dsc->pin; |
| 121 | |
| 122 | gpio_regs = (struct stm32_gpio_regs *)io_base[dsc->port]; |
| 123 | |
Matt Porter | 359919a | 2015-05-05 15:00:25 -0400 | [diff] [blame] | 124 | if (p < 8) { |
| 125 | cr = &gpio_regs->crl; |
| 126 | crp = p; |
| 127 | } else { |
| 128 | cr = &gpio_regs->crh; |
| 129 | crp = p - 8; |
| 130 | } |
| 131 | |
| 132 | clrbits_le32(cr, 0x3 << STM32_GPIO_CR_MODE_SHIFT(crp)); |
| 133 | setbits_le32(cr, ctl->mode << STM32_GPIO_CR_MODE_SHIFT(crp)); |
| 134 | |
| 135 | clrbits_le32(cr, 0x3 << STM32_GPIO_CR_CNF_SHIFT(crp)); |
| 136 | /* Inputs set the optional pull up / pull down */ |
| 137 | if (ctl->mode == STM32_GPIO_MODE_IN) { |
| 138 | setbits_le32(cr, ctl->icnf << STM32_GPIO_CR_CNF_SHIFT(crp)); |
| 139 | clrbits_le32(&gpio_regs->odr, 0x1 << p); |
| 140 | setbits_le32(&gpio_regs->odr, ctl->pupd << p); |
| 141 | } else { |
| 142 | setbits_le32(cr, ctl->ocnf << STM32_GPIO_CR_CNF_SHIFT(crp)); |
| 143 | } |
| 144 | |
| 145 | rv = 0; |
| 146 | out: |
| 147 | return rv; |
| 148 | } |
| 149 | #else |
| 150 | #error STM32 family not supported |
| 151 | #endif |
rev13@wp.pl | fec465a | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 152 | |
| 153 | int stm32_gpout_set(const struct stm32_gpio_dsc *dsc, int state) |
| 154 | { |
| 155 | struct stm32_gpio_regs *gpio_regs; |
| 156 | int rv; |
| 157 | |
| 158 | if (CHECK_DSC(dsc)) { |
| 159 | rv = -EINVAL; |
| 160 | goto out; |
| 161 | } |
| 162 | |
| 163 | gpio_regs = (struct stm32_gpio_regs *)io_base[dsc->port]; |
| 164 | |
| 165 | if (state) |
| 166 | writel(1 << dsc->pin, &gpio_regs->bsrr); |
| 167 | else |
| 168 | writel(1 << (dsc->pin + 16), &gpio_regs->bsrr); |
| 169 | |
| 170 | rv = 0; |
| 171 | out: |
| 172 | return rv; |
| 173 | } |
| 174 | |
| 175 | int stm32_gpin_get(const struct stm32_gpio_dsc *dsc) |
| 176 | { |
| 177 | struct stm32_gpio_regs *gpio_regs; |
| 178 | int rv; |
| 179 | |
| 180 | if (CHECK_DSC(dsc)) { |
| 181 | rv = -EINVAL; |
| 182 | goto out; |
| 183 | } |
| 184 | |
| 185 | gpio_regs = (struct stm32_gpio_regs *)io_base[dsc->port]; |
| 186 | rv = readl(&gpio_regs->idr) & (1 << dsc->pin); |
| 187 | out: |
| 188 | return rv; |
| 189 | } |
| 190 | |
| 191 | /* Common GPIO API */ |
| 192 | |
| 193 | int gpio_request(unsigned gpio, const char *label) |
| 194 | { |
| 195 | return 0; |
| 196 | } |
| 197 | |
| 198 | int gpio_free(unsigned gpio) |
| 199 | { |
| 200 | return 0; |
| 201 | } |
| 202 | |
| 203 | int gpio_direction_input(unsigned gpio) |
| 204 | { |
| 205 | struct stm32_gpio_dsc dsc; |
| 206 | struct stm32_gpio_ctl ctl; |
| 207 | |
| 208 | dsc.port = stm32_gpio_to_port(gpio); |
| 209 | dsc.pin = stm32_gpio_to_pin(gpio); |
Vikas Manocha | 1b51c93 | 2016-02-11 15:47:20 -0800 | [diff] [blame] | 210 | #if defined(CONFIG_STM32F4) || defined(CONFIG_STM32F7) |
rev13@wp.pl | fec465a | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 211 | ctl.af = STM32_GPIO_AF0; |
| 212 | ctl.mode = STM32_GPIO_MODE_IN; |
Matt Porter | 359919a | 2015-05-05 15:00:25 -0400 | [diff] [blame] | 213 | ctl.otype = STM32_GPIO_OTYPE_PP; |
rev13@wp.pl | fec465a | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 214 | ctl.pupd = STM32_GPIO_PUPD_NO; |
| 215 | ctl.speed = STM32_GPIO_SPEED_50M; |
Matt Porter | 359919a | 2015-05-05 15:00:25 -0400 | [diff] [blame] | 216 | #elif defined(CONFIG_STM32F1) |
| 217 | ctl.mode = STM32_GPIO_MODE_IN; |
| 218 | ctl.icnf = STM32_GPIO_ICNF_IN_FLT; |
| 219 | ctl.ocnf = STM32_GPIO_OCNF_GP_PP; /* ignored for input */ |
| 220 | ctl.pupd = STM32_GPIO_PUPD_UP; /* ignored for floating */ |
| 221 | #else |
| 222 | #error STM32 family not supported |
| 223 | #endif |
rev13@wp.pl | fec465a | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 224 | |
| 225 | return stm32_gpio_config(&dsc, &ctl); |
| 226 | } |
| 227 | |
| 228 | int gpio_direction_output(unsigned gpio, int value) |
| 229 | { |
| 230 | struct stm32_gpio_dsc dsc; |
| 231 | struct stm32_gpio_ctl ctl; |
| 232 | int res; |
| 233 | |
| 234 | dsc.port = stm32_gpio_to_port(gpio); |
| 235 | dsc.pin = stm32_gpio_to_pin(gpio); |
Vikas Manocha | 1b51c93 | 2016-02-11 15:47:20 -0800 | [diff] [blame] | 236 | #if defined(CONFIG_STM32F4) || defined(CONFIG_STM32F7) |
rev13@wp.pl | fec465a | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 237 | ctl.af = STM32_GPIO_AF0; |
| 238 | ctl.mode = STM32_GPIO_MODE_OUT; |
rev13@wp.pl | fec465a | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 239 | ctl.pupd = STM32_GPIO_PUPD_NO; |
| 240 | ctl.speed = STM32_GPIO_SPEED_50M; |
Matt Porter | 359919a | 2015-05-05 15:00:25 -0400 | [diff] [blame] | 241 | #elif defined(CONFIG_STM32F1) |
| 242 | ctl.mode = STM32_GPIO_MODE_OUT_50M; |
| 243 | ctl.ocnf = STM32_GPIO_OCNF_GP_PP; |
| 244 | ctl.icnf = STM32_GPIO_ICNF_IN_FLT; /* ignored for output */ |
| 245 | ctl.pupd = STM32_GPIO_PUPD_UP; /* ignored for output */ |
| 246 | #else |
| 247 | #error STM32 family not supported |
| 248 | #endif |
rev13@wp.pl | fec465a | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 249 | |
| 250 | res = stm32_gpio_config(&dsc, &ctl); |
| 251 | if (res < 0) |
| 252 | goto out; |
| 253 | res = stm32_gpout_set(&dsc, value); |
| 254 | out: |
| 255 | return res; |
| 256 | } |
| 257 | |
| 258 | int gpio_get_value(unsigned gpio) |
| 259 | { |
| 260 | struct stm32_gpio_dsc dsc; |
| 261 | |
| 262 | dsc.port = stm32_gpio_to_port(gpio); |
| 263 | dsc.pin = stm32_gpio_to_pin(gpio); |
| 264 | |
| 265 | return stm32_gpin_get(&dsc); |
| 266 | } |
| 267 | |
| 268 | int gpio_set_value(unsigned gpio, int value) |
| 269 | { |
| 270 | struct stm32_gpio_dsc dsc; |
| 271 | |
| 272 | dsc.port = stm32_gpio_to_port(gpio); |
| 273 | dsc.pin = stm32_gpio_to_pin(gpio); |
| 274 | |
| 275 | return stm32_gpout_set(&dsc, value); |
| 276 | } |