rev13@wp.pl | fec465a | 2015-03-01 12:44:40 +0100 | [diff] [blame^] | 1 | /* |
| 2 | * (C) Copyright 2011 |
| 3 | * Yuri Tikhonov, Emcraft Systems, yur@emcraft.com |
| 4 | * |
| 5 | * (C) Copyright 2015 |
| 6 | * Kamil Lulko, <rev13@wp.pl> |
| 7 | * |
| 8 | * SPDX-License-Identifier: GPL-2.0+ |
| 9 | */ |
| 10 | |
| 11 | #include <common.h> |
| 12 | #include <asm/io.h> |
| 13 | #include <asm/errno.h> |
| 14 | #include <asm/arch/stm32.h> |
| 15 | #include <asm/arch/gpio.h> |
| 16 | |
| 17 | DECLARE_GLOBAL_DATA_PTR; |
| 18 | |
| 19 | #define STM32_GPIOA_BASE (STM32_AHB1PERIPH_BASE + 0x0000) |
| 20 | #define STM32_GPIOB_BASE (STM32_AHB1PERIPH_BASE + 0x0400) |
| 21 | #define STM32_GPIOC_BASE (STM32_AHB1PERIPH_BASE + 0x0800) |
| 22 | #define STM32_GPIOD_BASE (STM32_AHB1PERIPH_BASE + 0x0C00) |
| 23 | #define STM32_GPIOE_BASE (STM32_AHB1PERIPH_BASE + 0x1000) |
| 24 | #define STM32_GPIOF_BASE (STM32_AHB1PERIPH_BASE + 0x1400) |
| 25 | #define STM32_GPIOG_BASE (STM32_AHB1PERIPH_BASE + 0x1800) |
| 26 | #define STM32_GPIOH_BASE (STM32_AHB1PERIPH_BASE + 0x1C00) |
| 27 | #define STM32_GPIOI_BASE (STM32_AHB1PERIPH_BASE + 0x2000) |
| 28 | |
| 29 | static const unsigned long io_base[] = { |
| 30 | STM32_GPIOA_BASE, STM32_GPIOB_BASE, STM32_GPIOC_BASE, |
| 31 | STM32_GPIOD_BASE, STM32_GPIOE_BASE, STM32_GPIOF_BASE, |
| 32 | STM32_GPIOG_BASE, STM32_GPIOH_BASE, STM32_GPIOI_BASE |
| 33 | }; |
| 34 | |
| 35 | struct stm32_gpio_regs { |
| 36 | u32 moder; /* GPIO port mode */ |
| 37 | u32 otyper; /* GPIO port output type */ |
| 38 | u32 ospeedr; /* GPIO port output speed */ |
| 39 | u32 pupdr; /* GPIO port pull-up/pull-down */ |
| 40 | u32 idr; /* GPIO port input data */ |
| 41 | u32 odr; /* GPIO port output data */ |
| 42 | u32 bsrr; /* GPIO port bit set/reset */ |
| 43 | u32 lckr; /* GPIO port configuration lock */ |
| 44 | u32 afr[2]; /* GPIO alternate function */ |
| 45 | }; |
| 46 | |
| 47 | #define CHECK_DSC(x) (!x || x->port > 8 || x->pin > 15) |
| 48 | #define CHECK_CTL(x) (!x || x->af > 15 || x->mode > 3 || x->otype > 1 || \ |
| 49 | x->pupd > 2 || x->speed > 3) |
| 50 | |
| 51 | int stm32_gpio_config(const struct stm32_gpio_dsc *dsc, |
| 52 | const struct stm32_gpio_ctl *ctl) |
| 53 | { |
| 54 | struct stm32_gpio_regs *gpio_regs; |
| 55 | u32 i; |
| 56 | int rv; |
| 57 | |
| 58 | if (CHECK_DSC(dsc)) { |
| 59 | rv = -EINVAL; |
| 60 | goto out; |
| 61 | } |
| 62 | if (CHECK_CTL(ctl)) { |
| 63 | rv = -EINVAL; |
| 64 | goto out; |
| 65 | } |
| 66 | |
| 67 | gpio_regs = (struct stm32_gpio_regs *)io_base[dsc->port]; |
| 68 | |
| 69 | setbits_le32(&STM32_RCC->ahb1enr, 1 << dsc->port); |
| 70 | |
| 71 | i = (dsc->pin & 0x07) * 4; |
| 72 | clrbits_le32(&gpio_regs->afr[dsc->pin >> 3], (0xF << i)); |
| 73 | setbits_le32(&gpio_regs->afr[dsc->pin >> 3], ctl->af << i); |
| 74 | |
| 75 | i = dsc->pin * 2; |
| 76 | |
| 77 | clrbits_le32(&gpio_regs->moder, (0x3 << i)); |
| 78 | setbits_le32(&gpio_regs->moder, ctl->mode << i); |
| 79 | |
| 80 | clrbits_le32(&gpio_regs->otyper, (0x3 << i)); |
| 81 | setbits_le32(&gpio_regs->otyper, ctl->otype << i); |
| 82 | |
| 83 | clrbits_le32(&gpio_regs->ospeedr, (0x3 << i)); |
| 84 | setbits_le32(&gpio_regs->ospeedr, ctl->speed << i); |
| 85 | |
| 86 | clrbits_le32(&gpio_regs->pupdr, (0x3 << i)); |
| 87 | setbits_le32(&gpio_regs->pupdr, ctl->pupd << i); |
| 88 | |
| 89 | rv = 0; |
| 90 | out: |
| 91 | return rv; |
| 92 | } |
| 93 | |
| 94 | int stm32_gpout_set(const struct stm32_gpio_dsc *dsc, int state) |
| 95 | { |
| 96 | struct stm32_gpio_regs *gpio_regs; |
| 97 | int rv; |
| 98 | |
| 99 | if (CHECK_DSC(dsc)) { |
| 100 | rv = -EINVAL; |
| 101 | goto out; |
| 102 | } |
| 103 | |
| 104 | gpio_regs = (struct stm32_gpio_regs *)io_base[dsc->port]; |
| 105 | |
| 106 | if (state) |
| 107 | writel(1 << dsc->pin, &gpio_regs->bsrr); |
| 108 | else |
| 109 | writel(1 << (dsc->pin + 16), &gpio_regs->bsrr); |
| 110 | |
| 111 | rv = 0; |
| 112 | out: |
| 113 | return rv; |
| 114 | } |
| 115 | |
| 116 | int stm32_gpin_get(const struct stm32_gpio_dsc *dsc) |
| 117 | { |
| 118 | struct stm32_gpio_regs *gpio_regs; |
| 119 | int rv; |
| 120 | |
| 121 | if (CHECK_DSC(dsc)) { |
| 122 | rv = -EINVAL; |
| 123 | goto out; |
| 124 | } |
| 125 | |
| 126 | gpio_regs = (struct stm32_gpio_regs *)io_base[dsc->port]; |
| 127 | rv = readl(&gpio_regs->idr) & (1 << dsc->pin); |
| 128 | out: |
| 129 | return rv; |
| 130 | } |
| 131 | |
| 132 | /* Common GPIO API */ |
| 133 | |
| 134 | int gpio_request(unsigned gpio, const char *label) |
| 135 | { |
| 136 | return 0; |
| 137 | } |
| 138 | |
| 139 | int gpio_free(unsigned gpio) |
| 140 | { |
| 141 | return 0; |
| 142 | } |
| 143 | |
| 144 | int gpio_direction_input(unsigned gpio) |
| 145 | { |
| 146 | struct stm32_gpio_dsc dsc; |
| 147 | struct stm32_gpio_ctl ctl; |
| 148 | |
| 149 | dsc.port = stm32_gpio_to_port(gpio); |
| 150 | dsc.pin = stm32_gpio_to_pin(gpio); |
| 151 | ctl.af = STM32_GPIO_AF0; |
| 152 | ctl.mode = STM32_GPIO_MODE_IN; |
| 153 | ctl.pupd = STM32_GPIO_PUPD_NO; |
| 154 | ctl.speed = STM32_GPIO_SPEED_50M; |
| 155 | |
| 156 | return stm32_gpio_config(&dsc, &ctl); |
| 157 | } |
| 158 | |
| 159 | int gpio_direction_output(unsigned gpio, int value) |
| 160 | { |
| 161 | struct stm32_gpio_dsc dsc; |
| 162 | struct stm32_gpio_ctl ctl; |
| 163 | int res; |
| 164 | |
| 165 | dsc.port = stm32_gpio_to_port(gpio); |
| 166 | dsc.pin = stm32_gpio_to_pin(gpio); |
| 167 | ctl.af = STM32_GPIO_AF0; |
| 168 | ctl.mode = STM32_GPIO_MODE_OUT; |
| 169 | ctl.otype = STM32_GPIO_OTYPE_PP; |
| 170 | ctl.pupd = STM32_GPIO_PUPD_NO; |
| 171 | ctl.speed = STM32_GPIO_SPEED_50M; |
| 172 | |
| 173 | res = stm32_gpio_config(&dsc, &ctl); |
| 174 | if (res < 0) |
| 175 | goto out; |
| 176 | res = stm32_gpout_set(&dsc, value); |
| 177 | out: |
| 178 | return res; |
| 179 | } |
| 180 | |
| 181 | int gpio_get_value(unsigned gpio) |
| 182 | { |
| 183 | struct stm32_gpio_dsc dsc; |
| 184 | |
| 185 | dsc.port = stm32_gpio_to_port(gpio); |
| 186 | dsc.pin = stm32_gpio_to_pin(gpio); |
| 187 | |
| 188 | return stm32_gpin_get(&dsc); |
| 189 | } |
| 190 | |
| 191 | int gpio_set_value(unsigned gpio, int value) |
| 192 | { |
| 193 | struct stm32_gpio_dsc dsc; |
| 194 | |
| 195 | dsc.port = stm32_gpio_to_port(gpio); |
| 196 | dsc.pin = stm32_gpio_to_pin(gpio); |
| 197 | |
| 198 | return stm32_gpout_set(&dsc, value); |
| 199 | } |