Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 4d3b73e7332058ee8d6930b49fe58a42d852362b / . / drivers / mmc / Kconfig
blob: f8ca52efb6b7d405b18abb1577d166855179a628 [file] [log] [blame]
Nobuhiro Iwamatsu3ec5f862014-12-17 08:03:00 +0900[diff] [blame]1menu "MMC Host controller Support"
2
Maxime Ripard4f780742015-10-15 22:04:05 +0200[diff] [blame]3config MMC
Masahiro Yamadaa5ed4be2016-12-07 22:10:26 +0900[diff] [blame]4 bool "MMC/SD/SDIO card support"
5 default ARM || PPC || SANDBOX
Adam Fordb10ba902018-02-06 12:43:56 -0600[diff] [blame]6 select HAVE_BLOCK_DEVICE
Maxime Ripard4f780742015-10-15 22:04:05 +0200[diff] [blame]7 help
Masahiro Yamadaa5ed4be2016-12-07 22:10:26 +0900[diff] [blame]8 This selects MultiMediaCard, Secure Digital and Secure
9 Digital I/O support.
10
11 If you want MMC/SD/SDIO support, you should say Y here and
12 also to your specific host controller driver.
Maxime Ripard4f780742015-10-15 22:04:05 +0200[diff] [blame]13
Jean-Jacques Hiblotd0531672018-01-04 15:23:32 +0100[diff] [blame]14config MMC_WRITE
15 bool "support for MMC/SD write operations"
16 depends on MMC
17 default y
18 help
19 Enable write access to MMC and SD Cards
20
Jaehoon Chung48ad8272021-02-16 10:16:52 +0900[diff] [blame]21config MMC_PWRSEQ
22 bool "HW reset support for eMMC"
23 depends on PWRSEQ
24 help
25 Ths select Hardware reset support aka pwrseq-emmc for eMMC
26 devices.
27
Jun Nieb4f4f6e2018-01-02 12:25:57 +0800[diff] [blame]28config MMC_BROKEN_CD
29 bool "Poll for broken card detection case"
30 help
31 If card detection feature is broken, just poll to detect.
32
Simon Glass1e8eb1b2015-06-23 15:38:48 -0600[diff] [blame]33config DM_MMC
34 bool "Enable MMC controllers using Driver Model"
35 depends on DM
36 help
Robert P. J. Day8d56db92016-07-15 13:44:45 -0400[diff] [blame]37 This enables the MultiMediaCard (MMC) uclass which supports MMC and
Simon Glass1e8eb1b2015-06-23 15:38:48 -0600[diff] [blame]38 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
39 and non-removable (e.g. eMMC chip) devices are supported. These
40 appear as block devices in U-Boot and can support filesystems such
41 as EXT4 and FAT.
42
Simon Glass5f4bd8c2017-07-04 13:31:19 -0600[diff] [blame]43config SPL_DM_MMC
44 bool "Enable MMC controllers using Driver Model in SPL"
45 depends on SPL_DM && DM_MMC
46 default y
47 help
48 This enables the MultiMediaCard (MMC) uclass which supports MMC and
49 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
50 and non-removable (e.g. eMMC chip) devices are supported. These
51 appear as block devices in U-Boot and can support filesystems such
52 as EXT4 and FAT.
53
Masahiro Yamadae8b99722016-12-07 22:10:27 +0900[diff] [blame]54if MMC
55
Michael Walle02016c62020-09-23 12:42:51 +0200[diff] [blame]56config MMC_SDHCI_ADMA_HELPERS
57 bool
58
Bhargav Shaha1afe252019-07-08 04:10:48 +0000[diff] [blame]59config MMC_SPI
60 bool "Support for SPI-based MMC controller"
61 depends on DM_MMC && DM_SPI
62 help
63 This selects SPI-based MMC controllers.
64 If you have an MMC controller on a SPI bus, say Y here.
65
66 If unsure, say N.
67
68config MMC_SPI_CRC_ON
69 bool "Support CRC for SPI-based MMC controller"
70 depends on MMC_SPI
71 default y
72 help
73 This enables CRC for SPI-based MMC controllers.
74
75 If unsure, say N.
76
Patrice Chotardfcce4202017-10-23 10:57:31 +0200[diff] [blame]77config ARM_PL180_MMCI
78 bool "ARM AMBA Multimedia Card Interface and compatible support"
Patrice Chotardfcce4202017-10-23 10:57:31 +0200[diff] [blame]79 help
80 This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
81 Interface (PL180, PL181 and compatible) support.
82 If you have an ARM(R) platform with a Multimedia Card slot,
83 say Y or M here.
84
Kishon Vijay Abraham I07baaa62017-09-21 16:30:10 +0200[diff] [blame]85config MMC_QUIRKS
86 bool "Enable quirks"
87 default y
88 help
89 Some cards and hosts may sometimes behave unexpectedly (quirks).
90 This option enable workarounds to handle those quirks. Some of them
Joel Johnson9cbee2c2020-01-11 09:08:15 -0700[diff] [blame]91 are enabled by default, other may require additional flags or are
Kishon Vijay Abraham I07baaa62017-09-21 16:30:10 +0200[diff] [blame]92 enabled by the host driver.
93
Jean-Jacques Hiblot1d7769a2017-11-30 17:44:02 +0100[diff] [blame]94config MMC_HW_PARTITIONING
95 bool "Support for HW partitioning command(eMMC)"
96 default y
97 help
98 This adds a command and an API to do hardware partitioning on eMMC
99 devices.
100
Alex Kiernan60e0f612018-05-08 04:43:31 +0000[diff] [blame]101config SUPPORT_EMMC_RPMB
102 bool "Support eMMC replay protected memory block (RPMB)"
103 imply CMD_MMC_RPMB
104 help
105 Enable support for reading, writing and programming the
106 key for the Replay Protection Memory Block partition in eMMC.
107
Alex Kiernan00848772019-05-01 07:58:27 +0000[diff] [blame]108config SUPPORT_EMMC_BOOT
109 bool "Support some additional features of the eMMC boot partitions"
110 help
111 Enable support for eMMC boot partitions. This also enables
112 extensions within the mmc command.
113
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]114config MMC_IO_VOLTAGE
115 bool "Support IO voltage configuration"
116 help
117 IO voltage configuration allows selecting the voltage level of the IO
118 lines (not the level of main supply). This is required for UHS
119 support. For eMMC this not mandatory, but not enabling this option may
120 prevent the driver of using the faster modes.
121
122config SPL_MMC_IO_VOLTAGE
123 bool "Support IO voltage configuration in SPL"
124 default n
125 help
126 IO voltage configuration allows selecting the voltage level of the IO
127 lines (not the level of main supply). This is required for UHS
128 support. For eMMC this not mandatory, but not enabling this option may
129 prevent the driver of using the faster modes.
130
131config MMC_UHS_SUPPORT
132 bool "enable UHS support"
133 depends on MMC_IO_VOLTAGE
134 help
135 The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
136 cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
137 frequency can go up to 208MHz (SDR104)
138
139config SPL_MMC_UHS_SUPPORT
140 bool "enable UHS support in SPL"
141 depends on SPL_MMC_IO_VOLTAGE
142 help
143 The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
144 cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
145 frequency can go up to 208MHz (SDR104)
146
Peng Faneede83b2019-07-10 14:43:07 +0800[diff] [blame]147config MMC_HS400_ES_SUPPORT
148 bool "enable HS400 Enhanced Strobe support"
149 help
150 The HS400 Enhanced Strobe mode is support by some eMMC. The bus
151 frequency is up to 200MHz. This mode does not tune the IO.
152
153config SPL_MMC_HS400_ES_SUPPORT
154 bool "enable HS400 Enhanced Strobe support in SPL"
155 help
156 The HS400 Enhanced Strobe mode is support by some eMMC. The bus
157 frequency is up to 200MHz. This mode does not tune the IO.
158
Peng Fan46801252018-08-10 14:07:54 +0800[diff] [blame]159config MMC_HS400_SUPPORT
160 bool "enable HS400 support"
161 select MMC_HS200_SUPPORT
162 help
163 The HS400 mode is support by some eMMC. The bus frequency is up to
164 200MHz. This mode requires tuning the IO.
165
166config SPL_MMC_HS400_SUPPORT
167 bool "enable HS400 support in SPL"
Faiz Abbas373954e2019-08-01 16:33:36 +0530[diff] [blame]168 select SPL_MMC_HS200_SUPPORT
Peng Fan46801252018-08-10 14:07:54 +0800[diff] [blame]169 help
170 The HS400 mode is support by some eMMC. The bus frequency is up to
171 200MHz. This mode requires tuning the IO.
172
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]173config MMC_HS200_SUPPORT
174 bool "enable HS200 support"
175 help
176 The HS200 mode is support by some eMMC. The bus frequency is up to
177 200MHz. This mode requires tuning the IO.
178
Jean-Jacques Hiblot6051e782017-11-30 17:44:01 +0100[diff] [blame]179config SPL_MMC_HS200_SUPPORT
180 bool "enable HS200 support in SPL"
181 help
182 The HS200 mode is support by some eMMC. The bus frequency is up to
183 200MHz. This mode requires tuning the IO.
184
Jean-Jacques Hiblota94fb412017-09-21 16:29:53 +0200[diff] [blame]185config MMC_VERBOSE
186 bool "Output more information about the MMC"
187 default y
188 help
189 Enable the output of more information about the card such as the
190 operating mode.
191
Jaehoon Chunge2bf5802018-01-26 19:25:31 +0900[diff] [blame]192config MMC_TRACE
193 bool "MMC debugging"
194 default n
195 help
196 This is an option for use by developer. Enable MMC core debugging.
197
198 If you need to see the MMC core message, say Y.
199
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]200config MMC_DAVINCI
201 bool "TI DAVINCI Multimedia Card Interface support"
202 depends on ARCH_DAVINCI
203 default y
204 help
205 This selects the TI DAVINCI Multimedia card Interface.
206 If you have an DAVINCI board with a Multimedia Card slot,
207 say Y here. If unsure, say N.
208
Masahiro Yamada7942e912017-01-10 13:32:04 +0900[diff] [blame]209config MMC_DW
210 bool "Synopsys DesignWare Memory Card Interface"
Philipp Tomsichb3027472018-11-30 22:13:25 +0100[diff] [blame]211 select BOUNCE_BUFFER
Masahiro Yamada7942e912017-01-10 13:32:04 +0900[diff] [blame]212 help
213 This selects support for the Synopsys DesignWare Mobile Storage IP
214 block, this provides host support for SD and MMC interfaces, in both
215 PIO, internal DMA mode and external DMA mode.
216
Arthur Li055e18e2020-02-20 18:19:35 -0800[diff] [blame]217config MMC_DW_CORTINA
218 bool "Cortina specific extensions for Synopsys DW Memory Card Interface"
219 depends on DM_MMC
220 depends on MMC_DW
221 depends on BLK
222 default n
223 help
224 This selects support for Cortina SoC specific extensions to the
225 Synopsys DesignWare Memory Card Interface driver. Select this option
226 for platforms based on Cortina CAxxxx Soc's.
227
Masahiro Yamadaf1ad7282017-01-10 13:32:05 +0900[diff] [blame]228config MMC_DW_EXYNOS
229 bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
230 depends on ARCH_EXYNOS
231 depends on MMC_DW
232 default y
233 help
234 This selects support for Samsung Exynos SoC specific extensions to the
235 Synopsys DesignWare Memory Card Interface driver. Select this option
236 for platforms based on Exynos4 and Exynos5 SoC's.
237
238config MMC_DW_K3
239 bool "K3 specific extensions for Synopsys DW Memory Card Interface"
240 depends on MMC_DW
241 help
242 This selects support for Hisilicon K3 SoC specific extensions to the
243 Synopsys DesignWare Memory Card Interface driver. Select this option
244 for platforms based on Hisilicon K3 SoC's.
245
Masahiro Yamadadc607f82017-01-10 13:32:03 +0900[diff] [blame]246config MMC_DW_ROCKCHIP
Simon Glass4ecaa6d2015-08-30 16:55:37 -0600[diff] [blame]247 bool "Rockchip SD/MMC controller support"
248 depends on DM_MMC && OF_CONTROL
Masahiro Yamada7942e912017-01-10 13:32:04 +0900[diff] [blame]249 depends on MMC_DW
Simon Glass4ecaa6d2015-08-30 16:55:37 -0600[diff] [blame]250 help
251 This enables support for the Rockchip SD/MMM controller, which is
252 based on Designware IP. The device is compatible with at least
253 SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
254 as removeable SD and micro-SD cards.
255
Masahiro Yamadaf1ad7282017-01-10 13:32:05 +0900[diff] [blame]256config MMC_DW_SOCFPGA
257 bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
258 depends on ARCH_SOCFPGA
259 depends on MMC_DW
260 default y
261 help
262 This selects support for Altera SOCFPGA specific extensions to the
263 Synopsys DesignWare Memory Card Interface driver. Select this option
264 for platforms based on Altera SOCFPGA.
265
Eugeniy Paltsevb050c2c2019-02-25 18:35:28 +0300[diff] [blame]266config MMC_DW_SNPS
267 bool "Extensions for DW Memory Card Interface used in Synopsys ARC devboards"
268 depends on MMC_DW
269 depends on DM_MMC
270 depends on OF_CONTROL
271 depends on CLK
272 help
273 This selects support for Synopsys DesignWare Memory Card Interface driver
274 extensions used in various Synopsys ARC devboards.
275
Stefan Bosch22c12f72020-07-10 19:07:29 +0200[diff] [blame]276config NEXELL_DWMMC
277 bool "Nexell SD/MMC controller support"
278 depends on ARCH_NEXELL
279 depends on MMC_DW
280 depends on DM_MMC
281 depends on PINCTRL_NEXELL
282 default y
283
Carlo Caione20cab782017-04-12 20:30:42 +0200[diff] [blame]284config MMC_MESON_GX
285 bool "Meson GX EMMC controller support"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]286 depends on DM_MMC && BLK && ARCH_MESON
Carlo Caione20cab782017-04-12 20:30:42 +0200[diff] [blame]287 help
288 Support for EMMC host controller on Meson GX ARM SoCs platform (S905)
289
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]290config MMC_MXC
291 bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
292 help
293 This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
294 Multimedia Card Interface. If you have an i.MX or MPC512x platform
295 with a Multimedia Card slot, say Y here.
296
297 If unsure, say N.
298
299config MMC_MXS
300 bool "Freescale MXS Multimedia Card Interface support"
Adam Forda456d562018-02-06 08:34:45 -0600[diff] [blame]301 depends on MX23 || MX28 || MX6 || MX7
Philipp Tomsichb3027472018-11-30 22:13:25 +0100[diff] [blame]302 select BOUNCE_BUFFER
Adam Forda456d562018-02-06 08:34:45 -0600[diff] [blame]303 select APBH_DMA
304 select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7
305 select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]306 help
307 This selects the Freescale SSP MMC controller found on MXS based
308 platforms like mx23/28.
309
310 If unsure, say N.
311
Felipe Balbiecf7dfd2017-02-20 14:24:13 +0300[diff] [blame]312config MMC_PCI
313 bool "Support for MMC controllers on PCI"
314 help
315 This selects PCI-based MMC controllers.
316 If you have an MMC controller on a PCI bus, say Y here.
317
Suneel Garapati40e61332019-10-19 18:03:01 -0700[diff] [blame]318config MMC_OCTEONTX
319 bool "Marvell OcteonTX Multimedia Card Interface support"
320 depends on (ARCH_OCTEONTX || ARCH_OCTEONTX2)
321 depends on DM_MMC
322 help
323 This selects the OcteonTX Multimedia card Interface.
324 If you have an OcteonTX/TX2 board with a Multimedia Card slot,
325 say Y here.
326
Felipe Balbiecf7dfd2017-02-20 14:24:13 +0300[diff] [blame]327 If unsure, say N.
328
Marcel Ziswiler82c645c2019-05-20 02:44:58 +0200[diff] [blame]329config PXA_MMC_GENERIC
330 bool "Support for MMC controllers on PXA"
331 help
332 This selects MMC controllers on PXA.
333 If you are on a PXA architecture, say Y here.
334
335 If unsure, say N.
336
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]337config MMC_OMAP_HS
338 bool "TI OMAP High Speed Multimedia Card Interface support"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]339 select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
Jean-Jacques Hiblot4612bdd2017-09-21 17:03:10 +0200[diff] [blame]340 select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]341 help
342 This selects the TI OMAP High Speed Multimedia card Interface.
343 If you have an omap2plus board with a Multimedia Card slot,
344 say Y here.
345
346 If unsure, say N.
347
Jean-Jacques Hiblotcebf0592018-02-23 10:40:18 +0100[diff] [blame]348config MMC_OMAP_HS_ADMA
349 bool "ADMA support for OMAP HS MMC"
350 depends on MMC_OMAP_HS && !OMAP34XX
351 default y if !AM33XX
352 help
353 This enables support for the ADMA2 controller (SDA3.00 Part A2 DMA
354 controller). If supported by the hardware, selecting this option will
355 increase performances.
356
Adam Fordef354962017-02-06 11:31:43 -0600[diff] [blame]357config MMC_OMAP36XX_PINS
358 bool "Enable MMC1 on OMAP36xx/37xx"
359 depends on OMAP34XX && MMC_OMAP_HS
360 help
361 This enables extended-drain in the MMC/SD/SDIO1I/O and
362 GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129)
363 specific to the OMAP36xx/37xx using MMC1
364
365 If you have a controller with this interface, say Y here.
366
367 If unsure, say N.
368
Nobuhiro Iwamatsu3ec5f862014-12-17 08:03:00 +0900[diff] [blame]369config SH_SDHI
370 bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
Marek Vasut1c5a5a92017-05-13 15:51:14 +0200[diff] [blame]371 depends on ARCH_RMOBILE
Nobuhiro Iwamatsu3ec5f862014-12-17 08:03:00 +0900[diff] [blame]372 help
373 Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
374
Marek Vasuta8624ac2018-04-21 17:40:20 +0200[diff] [blame]375config SH_MMCIF
376 bool "SuperH/Renesas ARM SoCs on-chip MMCIF host controller support"
377 depends on ARCH_RMOBILE || SH
378 help
379 Support for the on-chip MMCIF host controller on SuperH/Renesas ARM SoCs platform
380
Masahiro Yamadaa0cfcc02016-02-18 19:52:48 +0900[diff] [blame]381config MMC_UNIPHIER
Marek Vasut2883f742017-09-23 13:30:30 +0200[diff] [blame]382 bool "UniPhier SD/MMC Host Controller support"
383 depends on ARCH_UNIPHIER
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]384 depends on BLK && DM_MMC
Masahiro Yamadac2326532016-12-30 23:20:14 +0900[diff] [blame]385 depends on OF_CONTROL
Masahiro Yamadaa0cfcc02016-02-18 19:52:48 +0900[diff] [blame]386 help
Marek Vasut847ee0c2017-07-21 23:24:36 +0200[diff] [blame]387 This selects support for the Matsushita SD/MMC Host Controller on
Marek Vasut2883f742017-09-23 13:30:30 +0200[diff] [blame]388 SocioNext UniPhier SoCs.
389
390config RENESAS_SDHI
391 bool "Renesas R-Car SD/MMC Host Controller support"
392 depends on ARCH_RMOBILE
393 depends on BLK && DM_MMC
394 depends on OF_CONTROL
Marek Vasut9f7baeb2020-04-04 12:45:04 +0200[diff] [blame]395 select BOUNCE_BUFFER
Marek Vasut2883f742017-09-23 13:30:30 +0200[diff] [blame]396 help
397 This selects support for the Matsushita SD/MMC Host Controller on
398 Renesas R-Car SoCs.
Masahiro Yamadaa0cfcc02016-02-18 19:52:48 +0900[diff] [blame]399
Alexander Graf044725f2018-01-23 18:05:22 +0100[diff] [blame]400config MMC_BCM2835
401 bool "BCM2835 family custom SD/MMC Host Controller support"
402 depends on ARCH_BCM283X
403 depends on BLK && DM_MMC
404 depends on OF_CONTROL
405 default y
406 help
407 This selects support for the custom SD host controller in the BCM2835
408 family of devices.
409
410 If you have a BCM2835 platform with SD or MMC devices, say Y here.
411
412 If unsure, say N.
413
Paul Burton8e142842018-12-16 19:25:20 -0300[diff] [blame]414config JZ47XX_MMC
415 bool "Ingenic JZ47xx SD/MMC Host Controller support"
416 depends on ARCH_JZ47XX
417 help
418 This selects support for the SD Card Controller on Ingenic JZ47xx SoCs.
419
Masahiro Yamada54f7cfc2017-01-30 19:46:50 +0900[diff] [blame]420config MMC_SANDBOX
Simon Glassf9eebac2016-05-01 13:52:42 -0600[diff] [blame]421 bool "Sandbox MMC support"
Masahiro Yamada54f7cfc2017-01-30 19:46:50 +0900[diff] [blame]422 depends on SANDBOX
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]423 depends on BLK && DM_MMC && OF_CONTROL
Simon Glassf9eebac2016-05-01 13:52:42 -0600[diff] [blame]424 help
425 This select a dummy sandbox MMC driver. At present this does nothing
426 other than allow sandbox to be build with MMC support. This
427 improves build coverage for sandbox and makes it easier to detect
428 MMC build errors with sandbox.
429
Masahiro Yamada7db8c172016-12-07 22:10:28 +0900[diff] [blame]430config MMC_SDHCI
431 bool "Secure Digital Host Controller Interface support"
432 help
433 This selects the generic Secure Digital Host Controller Interface.
434 It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
435 and Toshiba(R). Most controllers found in laptops are of this type.
436
437 If you have a controller with this interface, say Y here.
438
439 If unsure, say N.
440
Masahiro Yamadabfd110f2016-12-07 22:10:30 +0900[diff] [blame]441config MMC_SDHCI_IO_ACCESSORS
442 bool
443 depends on MMC_SDHCI
444 help
445 This is silent Kconfig symbol that is selected by the drivers that
446 need to overwrite SDHCI IO memory accessors.
447
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]448config MMC_SDHCI_SDMA
449 bool "Support SDHCI SDMA"
450 depends on MMC_SDHCI
451 help
452 This enables support for the SDMA (Single Operation DMA) defined
453 in the SD Host Controller Standard Specification Version 1.00 .
454
Faiz Abbas4c082a62019-04-16 23:06:58 +0530[diff] [blame]455config MMC_SDHCI_ADMA
456 bool "Support SDHCI ADMA2"
457 depends on MMC_SDHCI
Michael Walle02016c62020-09-23 12:42:51 +0200[diff] [blame]458 select MMC_SDHCI_ADMA_HELPERS
Faiz Abbas4c082a62019-04-16 23:06:58 +0530[diff] [blame]459 help
460 This enables support for the ADMA (Advanced DMA) defined
461 in the SD Host Controller Standard Specification Version 3.00
462
463config SPL_MMC_SDHCI_ADMA
464 bool "Support SDHCI ADMA2 in SPL"
465 depends on MMC_SDHCI
Michael Walle02016c62020-09-23 12:42:51 +0200[diff] [blame]466 select MMC_SDHCI_ADMA_HELPERS
Faiz Abbas4c082a62019-04-16 23:06:58 +0530[diff] [blame]467 help
468 This enables support for the ADMA (Advanced DMA) defined
469 in the SD Host Controller Standard Specification Version 3.00 in SPL.
470
Eddie Jamesc8a65812019-08-27 09:48:03 -0500[diff] [blame]471config MMC_SDHCI_ASPEED
472 bool "Aspeed SDHCI controller"
473 depends on ARCH_ASPEED
474 depends on DM_MMC
475 depends on MMC_SDHCI
476 help
477 Enables support for the Aspeed SDHCI 2.0 controller present on Aspeed
478 SoCs. This device is compatible with SD 3.0 and/or MMC 4.3
479 specifications. On the AST2600, the device is also compatible with
480 MMC 5.1 and eMMC 3.0.
481
Masahiro Yamada8c1a1322017-01-30 19:46:55 +0900[diff] [blame]482config MMC_SDHCI_ATMEL
483 bool "Atmel SDHCI controller support"
484 depends on ARCH_AT91
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]485 depends on DM_MMC && BLK && ARCH_AT91
Masahiro Yamada8c1a1322017-01-30 19:46:55 +0900[diff] [blame]486 depends on MMC_SDHCI
487 help
488 This enables support for the Atmel SDHCI controller, which supports
489 the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
490 Memory Card Specification V3.0, and the SDIO V3.0 specification.
491 It is compliant with the SD Host Controller Standard V3.0
492 specification.
493
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]494config MMC_SDHCI_BCM2835
495 tristate "SDHCI support for the BCM2835 SD/MMC Controller"
496 depends on ARCH_BCM283X
497 depends on MMC_SDHCI
Masahiro Yamadabfd110f2016-12-07 22:10:30 +0900[diff] [blame]498 select MMC_SDHCI_IO_ACCESSORS
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]499 help
500 This selects the BCM2835 SD/MMC controller.
501
502 If you have a BCM2835 platform with SD or MMC devices,
503 say Y here.
504
505 If unsure, say N.
506
Thomas Fitzsimmons919646d2018-06-08 17:59:45 -0400[diff] [blame]507config MMC_SDHCI_BCMSTB
508 tristate "SDHCI support for the BCMSTB SD/MMC Controller"
509 depends on MMC_SDHCI
510 help
511 This selects the Broadcom set-top box SD/MMC controller.
512
513 If you have a BCMSTB platform with SD or MMC devices,
514 say Y here.
515
516 If unsure, say N.
517
Masahiro Yamadadcbc4432016-12-30 22:41:46 +0900[diff] [blame]518config MMC_SDHCI_CADENCE
519 bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]520 depends on BLK && DM_MMC
Masahiro Yamadadcbc4432016-12-30 22:41:46 +0900[diff] [blame]521 depends on MMC_SDHCI
522 depends on OF_CONTROL
523 help
524 This selects the Cadence SD/SDIO/eMMC driver.
525
526 If you have a controller with this interface, say Y here.
527
528 If unsure, say N.
529
Faiz Abbasd8fb3092019-06-11 00:43:31 +0530[diff] [blame]530config MMC_SDHCI_AM654
531 bool "SDHCI Controller on TI's Am654 devices"
Lokesh Vutlabc9979f2018-08-27 15:57:54 +0530[diff] [blame]532 depends on ARCH_K3
533 depends on MMC_SDHCI
534 depends on DM_MMC && OF_CONTROL && BLK
Faiz Abbase9aed582019-06-11 00:43:38 +0530[diff] [blame]535 depends on REGMAP
Faiz Abbas36c8c5c2021-02-04 15:10:54 +0530[diff] [blame]536 select MMC_SDHCI_IO_ACCESSORS
Lokesh Vutlabc9979f2018-08-27 15:57:54 +0530[diff] [blame]537 help
Faiz Abbasd8fb3092019-06-11 00:43:31 +0530[diff] [blame]538 Support for Secure Digital Host Controller Interface (SDHCI)
539 controllers present on TI's AM654 SOCs.
Lokesh Vutlabc9979f2018-08-27 15:57:54 +0530[diff] [blame]540
Arun Parameswaran2f4f34a2019-09-12 11:06:08 -0700[diff] [blame]541config MMC_SDHCI_IPROC
542 bool "SDHCI support for the iProc SD/MMC Controller"
543 depends on MMC_SDHCI
544 help
545 This selects the iProc SD/MMC controller.
546
547 If you have a Broadcom IPROC platform with SD or MMC devices,
548 say Y or M here.
549
550 If unsure, say N.
551
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]552config MMC_SDHCI_KONA
553 bool "SDHCI support on Broadcom KONA platform"
554 depends on MMC_SDHCI
555 help
556 This selects the Broadcom Kona Secure Digital Host Controller
557 Interface(SDHCI) support.
558 This is used in Broadcom mobile SoCs.
559
560 If you have a controller with this interface, say Y here.
561
Masahiro Yamadaa1262eb2017-01-30 19:46:53 +0900[diff] [blame]562config MMC_SDHCI_MSM
563 bool "Qualcomm SDHCI controller"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]564 depends on BLK && DM_MMC
Masahiro Yamadaa1262eb2017-01-30 19:46:53 +0900[diff] [blame]565 depends on MMC_SDHCI
566 help
567 Enables support for SDHCI 2.0 controller present on some Qualcomm
568 Snapdragon devices. This device is compatible with eMMC v4.5 and
569 SD 3.0 specifications. Both SD and eMMC devices are supported.
570 Card-detect gpios are not supported.
571
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]572config MMC_SDHCI_MV
573 bool "SDHCI support on Marvell platform"
574 depends on ARCH_MVEBU
575 depends on MMC_SDHCI
576 help
577 This selects the Secure Digital Host Controller Interface on
578 Marvell platform.
579
580 If you have a controller with this interface, say Y here.
581
582 If unsure, say N.
583
Masahiro Yamadaf79df032017-01-30 19:46:54 +0900[diff] [blame]584config MMC_SDHCI_PIC32
585 bool "Microchip PIC32 on-chip SDHCI support"
586 depends on DM_MMC && MACH_PIC32
587 depends on MMC_SDHCI
588 help
589 Support for Microchip PIC32 SDHCI controller.
590
Masahiro Yamadababe0262017-01-30 19:46:52 +0900[diff] [blame]591config MMC_SDHCI_ROCKCHIP
592 bool "Arasan SDHCI controller for Rockchip support"
593 depends on ARCH_ROCKCHIP
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]594 depends on DM_MMC && BLK
Masahiro Yamadababe0262017-01-30 19:46:52 +0900[diff] [blame]595 depends on MMC_SDHCI
596 help
597 Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
598
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900[diff] [blame]599config MMC_SDHCI_S5P
600 bool "SDHCI support on Samsung S5P SoC"
601 depends on MMC_SDHCI
602 help
603 This selects the Secure Digital Host Controller Interface (SDHCI)
604 on Samsung S5P SoCs.
605
606 If you have a controller with this interface, say Y here.
607
608 If unsure, say N.
609
610config MMC_SDHCI_SPEAR
611 bool "SDHCI support on ST SPEAr platform"
612 depends on MMC_SDHCI
613 help
614 This selects the Secure Digital Host Controller Interface (SDHCI)
615 often referrered to as the HSMMC block in some of the ST SPEAR range
616 of SoC
617
618 If you have a controller with this interface, say Y here.
619
620 If unsure, say N.
621
Patrice Chotard2eea7d82017-02-21 13:37:09 +0100[diff] [blame]622config MMC_SDHCI_STI
623 bool "SDHCI support for STMicroelectronics SoC"
Patrice Chotardcdf6b572017-02-21 13:37:11 +0100[diff] [blame]624 depends on MMC_SDHCI && OF_CONTROL
Patrice Chotard2eea7d82017-02-21 13:37:09 +0100[diff] [blame]625 help
626 This selects the Secure Digital Host Controller Interface (SDHCI)
627 on STMicroelectronics STiH410 SoC.
628
Stefan Roese121fc562016-12-09 15:03:28 +0100[diff] [blame]629config MMC_SDHCI_XENON
630 bool "SDHCI support for the Xenon SDHCI controller"
631 depends on MMC_SDHCI && DM_MMC && OF_CONTROL
632 help
633 Support for Xenon SDHCI host controller on Marvell Armada 3700
634 7k/8k ARM SoCs platforms
635
636 If you have a controller with this interface, say Y here.
637
638 If unsure, say N.
639
Felipe Balbib7567602017-02-20 14:24:14 +0300[diff] [blame]640config MMC_SDHCI_TANGIER
641 bool "Tangier SDHCI controller support"
642 depends on DM_MMC && BLK
643 depends on MMC_SDHCI
644 help
645 This selects support for SDHCI controller on Tanginer
646 SoC. Note that this controller does not sit on PCI bus and,
647 hence, cannot be enumerated by standard PCI means.
648
649 If you're using an Intel Tangier SoC (available on Intel
650 Edison board), say Y here.
651
652 If unsure, say N.
653
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]654config MMC_SDHCI_TEGRA
655 bool "SDHCI platform support for the Tegra SD/MMC Controller"
Trevor Woerner513f6402020-05-06 08:02:41 -0400[diff] [blame]656 depends on ARCH_TEGRA
Philipp Tomsichb3027472018-11-30 22:13:25 +0100[diff] [blame]657 select BOUNCE_BUFFER
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]658 default y
659 help
660 This selects the Tegra SD/MMC controller. If you have a Tegra
661 platform with SD or MMC devices, say Y here.
662
663 If unsure, say N.
664
Trent Piepho1bf56c32019-04-01 23:05:49 +0000[diff] [blame]665config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
666 bool "Disable external clock loopback"
667 depends on MMC_SDHCI_TEGRA && TEGRA124
668 help
669 Disable the external clock loopback and use the internal one on SDMMC3
670 as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits
671 being set to 0xfffd according to the TRM.
672
673 TODO(marcel.ziswiler@toradex.com): Move to device tree controlled
674 approach once proper kernel integration made it mainline.
675
Masahiro Yamada168c57d2017-01-30 19:46:51 +0900[diff] [blame]676config MMC_SDHCI_ZYNQ
677 bool "Arasan SDHCI controller support"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]678 depends on DM_MMC && OF_CONTROL && BLK
Masahiro Yamada168c57d2017-01-30 19:46:51 +0900[diff] [blame]679 depends on MMC_SDHCI
680 help
681 Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
682
Vipul Kumar62548002018-02-28 15:53:28 +0530[diff] [blame]683config ZYNQ_SDHCI_MAX_FREQ
684 int "Set the maximum frequency of the controller"
685 depends on MMC_SDHCI_ZYNQ
686 help
687 Set the maximum frequency of the controller.
688
Vipul Kumardcc14e32018-02-28 15:53:29 +0530[diff] [blame]689config ZYNQ_SDHCI_MIN_FREQ
690 int "Set the minimum frequency of the controller"
691 depends on MMC_SDHCI_ZYNQ
692 default 0
693 help
694 Set the minimum frequency of the controller.
695
Siva Durga Prasad Paladugua9a3d002019-05-27 14:33:14 +0530[diff] [blame]696config ZYNQ_HISPD_BROKEN
697 bool "High speed broken for Zynq SDHCI controller"
698 depends on MMC_SDHCI_ZYNQ
699 help
700 Set if high speed mode is broken.
701
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]702config MMC_SUNXI
703 bool "Allwinner sunxi SD/MMC Host Controller support"
Masahiro Yamada41ff5292017-01-12 12:16:15 +0900[diff] [blame]704 depends on ARCH_SUNXI && !UART0_PORT_F
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900[diff] [blame]705 default y
706 help
707 This selects support for the SD/MMC Host Controller on
708 Allwinner sunxi SoCs.
709
Maxime Ripard95e34702017-08-23 12:03:41 +0200[diff] [blame]710config MMC_SUNXI_HAS_NEW_MODE
711 bool
712 depends on MMC_SUNXI
713
Vasily Khoruzhickb198e2c2018-11-09 20:41:44 -0800[diff] [blame]714config MMC_SUNXI_HAS_MODE_SWITCH
715 bool
716 depends on MMC_SUNXI
717
Wenyou Yang7a7a64c2017-04-13 10:29:22 +0800[diff] [blame]718config GENERIC_ATMEL_MCI
719 bool "Atmel Multimedia Card Interface support"
Simon Glasseba48f92017-07-29 11:35:31 -0600[diff] [blame]720 depends on DM_MMC && BLK && ARCH_AT91
Wenyou Yang7a7a64c2017-04-13 10:29:22 +0800[diff] [blame]721 help
722 This enables support for Atmel High Speed Multimedia Card Interface
723 (HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3,
724 the SD Memory Card Specification V2.0, the SDIO V2.0 specification
725 and CE-ATA V1.1.
726
Patrice Chotardae19b812017-09-04 17:56:22 +0200[diff] [blame]727config STM32_SDMMC2
728 bool "STMicroelectronics STM32H7 SD/MMC Host Controller support"
Patrice Chotard4cb0ac92017-10-03 15:54:58 +0200[diff] [blame]729 depends on DM_MMC && BLK && OF_CONTROL
Patrice Chotardae19b812017-09-04 17:56:22 +0200[diff] [blame]730 help
731 This selects support for the SD/MMC controller on STM32H7 SoCs.
732 If you have a board based on such a SoC and with a SD/MMC slot,
733 say Y or M here.
734
Rick Chencbb52972017-11-14 14:47:09 +0800[diff] [blame]735config FTSDC010
736 bool "Ftsdc010 SD/MMC controller Support"
737 help
738 This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP.
739
Rick Chenc59a6fb2018-03-20 15:10:49 +0800[diff] [blame]740config FTSDC010_SDIO
741 bool "Support ftsdc010 sdio"
742 default n
743 depends on FTSDC010
744 help
745 This can enable ftsdc010 sdio function.
746
developerdc5a9aa2018-11-15 10:08:04 +0800[diff] [blame]747config MMC_MTK
748 bool "MediaTek SD/MMC Card Interface support"
developer607faf72019-09-25 17:45:37 +0800[diff] [blame]749 depends on ARCH_MEDIATEK || ARCH_MTMIPS
developerdc5a9aa2018-11-15 10:08:04 +0800[diff] [blame]750 depends on BLK && DM_MMC
751 depends on OF_CONTROL
752 help
753 This selects the MediaTek(R) Secure digital and Multimedia card Interface.
754 If you have a machine with a integrated SD/MMC card reader, say Y or M here.
755 This is needed if support for any SD/SDIO/MMC devices is required.
756 If unsure, say N.
757
Masahiro Yamadae8b99722016-12-07 22:10:27 +0900[diff] [blame]758endif
759
Mario Six41d7d972018-03-28 14:38:19 +0200[diff] [blame]760config FSL_ESDHC
761 bool "Freescale/NXP eSDHC controller support"
762 help
Yangbo Lu982f4252019-06-21 11:42:27 +0800[diff] [blame]763 This selects support for the eSDHC (Enhanced Secure Digital Host
764 Controller) found on numerous Freescale/NXP SoCs.
765
Michael Walle081d4012020-10-12 10:07:14 +0200[diff] [blame]766config FSL_ESDHC_SUPPORT_ADMA2
767 bool "enable ADMA2 support"
768 depends on FSL_ESDHC
769 select MMC_SDHCI_ADMA_HELPERS
770 help
771 This enables support for the ADMA2 transfer mode. If supported by the
772 eSDHC it will allow 64bit DMA addresses.
773
Yangbo Luce884022020-05-19 11:06:44 +0800[diff] [blame]774config FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND
775 bool "enable eSDHC workaround for 3.3v IO reliability issue"
776 depends on FSL_ESDHC && DM_MMC
777 default n
778 help
779 When eSDHC operates at 3.3v, damage can accumulate in an internal
780 level shifter at a higher than expected rate. The faster the interface
781 runs, the more damage accumulates. This issue now is found on LX2160A
782 eSDHC1 for only SD card. The hardware workaround is recommended to use
783 an on-board level shifter that is 1.8v on SoC side and 3.3v on SD card
784 side. For boards without hardware workaround, this option could be
785 enabled, ensuring 1.8v IO voltage and disabling eSDHC if no card.
786 This option assumes no hotplug, and u-boot has to make all the way to
787 to linux to use 1.8v UHS-I speed mode if has card.
788
Yangbo Lu982f4252019-06-21 11:42:27 +0800[diff] [blame]789config FSL_ESDHC_IMX
790 bool "Freescale/NXP i.MX eSDHC controller support"
791 help
792 This selects support for the i.MX eSDHC (Enhanced Secure Digital Host
793 Controller) found on numerous Freescale/NXP SoCs.
Mario Six41d7d972018-03-28 14:38:19 +0200[diff] [blame]794
Adam Ford01836582019-08-14 07:23:43 -0500[diff] [blame]795config FSL_USDHC
796 bool "Freescale/NXP i.MX uSDHC controller support"
Giulio Benetti65b5ec12020-01-10 15:51:46 +0100[diff] [blame]797 depends on MX6 || MX7 ||ARCH_MX7ULP || IMX8 || IMX8M || IMXRT || TARGET_S32V234EVB
Adam Ford01836582019-08-14 07:23:43 -0500[diff] [blame]798 select FSL_ESDHC_IMX
799 help
800 This enables the Ultra Secured Digital Host Controller enhancements
801
Nobuhiro Iwamatsu3ec5f862014-12-17 08:03:00 +0900[diff] [blame]802endmenu
York Sun097e3602016-12-28 08:43:42 -0800[diff] [blame]803
804config SYS_FSL_ERRATUM_ESDHC111
805 bool
806
807config SYS_FSL_ERRATUM_ESDHC13
808 bool
809
810config SYS_FSL_ERRATUM_ESDHC135
811 bool
812
813config SYS_FSL_ERRATUM_ESDHC_A001
814 bool