| York Sun | e12abcb | 2015-03-20 19:28:24 -0700 | [diff] [blame] | 1 | Overview |
| 2 | -------- |
| Prabhakar Kushwaha | 122bcfd | 2015-11-09 16:42:07 +0530 | [diff] [blame] | 3 | The LS2080A Reference Design (RDB) is a high-performance computing, |
| Priyanka Jain | 4a6f173 | 2016-11-17 12:29:55 +0530 | [diff] [blame] | 4 | evaluation, and development platform that supports the QorIQ LS2080A, LS2088A |
| York Sun | e12abcb | 2015-03-20 19:28:24 -0700 | [diff] [blame] | 5 | Layerscape Architecture processor. |
| 6 | |
| Priyanka Jain | 75cd67f | 2017-04-27 15:08:07 +0530 | [diff] [blame] | 7 | The LS2081A Reference Design (RDB) is a high-performance computing, |
| 8 | evaluation, and development platform that supports the QorIQ LS2081A |
| 9 | Layerscape Architecture processor.More details in below sections |
| 10 | |
| 11 | LS2080A, LS2088A, LS2081A SoC Overview |
| 12 | -------------------------------------- |
| Priyanka Jain | 4a6f173 | 2016-11-17 12:29:55 +0530 | [diff] [blame] | 13 | Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A, |
| Priyanka Jain | 75cd67f | 2017-04-27 15:08:07 +0530 | [diff] [blame] | 14 | LS2081A, LS2088A SoC overview. |
| York Sun | e12abcb | 2015-03-20 19:28:24 -0700 | [diff] [blame] | 15 | |
| Prabhakar Kushwaha | 122bcfd | 2015-11-09 16:42:07 +0530 | [diff] [blame] | 16 | LS2080ARDB board Overview |
| York Sun | e12abcb | 2015-03-20 19:28:24 -0700 | [diff] [blame] | 17 | ----------------------- |
| 18 | - SERDES Connections, 16 lanes supporting: |
| 19 | - PCI Express - 3.0 |
| 20 | - SATA 3.0 |
| Vladimir Oltean | 6a6e402 | 2021-09-18 15:32:34 +0300 | [diff] [blame] | 21 | - 10GBase-R |
| York Sun | e12abcb | 2015-03-20 19:28:24 -0700 | [diff] [blame] | 22 | - DDR Controller |
| 23 | - Two ports of 72-bits (8-bits ECC) DDR4. Each port supports four |
| 24 | chip-selects and two DIMM connectors. Support is up to 2133MT/s. |
| 25 | - One port of 40-bits (8-bits ECC) DDR4 which supports four chip-selects |
| 26 | and two DIMM connectors. Support is up to 1600MT/s. |
| 27 | -IFC/Local Bus |
| 28 | - IFC rev. 2.0 implementation supporting Little Endian connection scheme. |
| 29 | - 128 MB NOR flash 16-bit data bus |
| 30 | - One 2 GB NAND flash with ECC support |
| 31 | - CPLD connection |
| 32 | - USB 3.0 |
| 33 | - Two high speed USB 3.0 ports |
| 34 | - First USB 3.0 port configured as Host with Type-A connector |
| 35 | - Second USB 3.0 port configured as OTG with micro-AB connector |
| 36 | - SDHC adapter |
| 37 | - SD Card Rev 2.0 and Rev 3.0 |
| 38 | - DSPI |
| 39 | - 128 MB high-speed flash Memory for boot code and storage (up to 108MHz) |
| 40 | - 4 I2C controllers |
| 41 | - Two SATA onboard connectors |
| 42 | - UART |
| 43 | - ARM JTAG support |
| 44 | |
| Priyanka Jain | 75cd67f | 2017-04-27 15:08:07 +0530 | [diff] [blame] | 45 | LS2081ARDB board Overview |
| 46 | ------------------------- |
| 47 | LS2081ARDB board is similar to LS2080ARDB board |
| 48 | with few differences like |
| 49 | - Hosts LS2081A SoC |
| 50 | - Default boot source is QSPI-boot |
| 51 | - Does not have IFC interface |
| 52 | - RTC and QSPI flash devices are different |
| 53 | - Provides QIXIS access via I2C |
| 54 | |
| York Sun | e12abcb | 2015-03-20 19:28:24 -0700 | [diff] [blame] | 55 | Memory map from core's view |
| 56 | ---------------------------- |
| 57 | 0x00_0000_0000 .. 0x00_000F_FFFF Boot Rom |
| 58 | 0x00_0100_0000 .. 0x00_0FFF_FFFF CCSR |
| 59 | 0x00_1800_0000 .. 0x00_181F_FFFF OCRAM |
| Priyanka Jain | 7d05b99 | 2017-04-28 10:41:35 +0530 | [diff] [blame] | 60 | 0x00_2000_0000 .. 0x00_2FFF_FFFF QSPI region #1 |
| York Sun | e12abcb | 2015-03-20 19:28:24 -0700 | [diff] [blame] | 61 | 0x00_3000_0000 .. 0x00_3FFF_FFFF IFC region #1 |
| 62 | 0x00_8000_0000 .. 0x00_FFFF_FFFF DDR region #1 |
| 63 | 0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2 |
| 64 | 0x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2 |
| 65 | |
| Bin Meng | 7557405 | 2016-02-05 19:30:11 -0800 | [diff] [blame] | 66 | Other addresses are either reserved, or not used directly by U-Boot. |
| York Sun | e12abcb | 2015-03-20 19:28:24 -0700 | [diff] [blame] | 67 | This list should be updated when more addresses are used. |
| 68 | |
| 69 | IFC region map from core's view |
| 70 | ------------------------------- |
| 71 | During boot i.e. IFC Region #1:- |
| 72 | 0x30000000 - 0x37ffffff : 128MB : NOR flash |
| 73 | 0x3C000000 - 0x40000000 : 64MB : CPLD |
| 74 | |
| 75 | After relocate to DDR i.e. IFC Region #2:- |
| 76 | 0x5_1000_0000..0x5_1fff_ffff Memory Hole |
| 77 | 0x5_2000_0000..0x5_3fff_ffff IFC CSx (CPLD, NAND and others 512MB) |
| 78 | 0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB |
| 79 | 0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet) |
| 80 | 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet) |
| 81 | |
| 82 | Booting Options |
| 83 | --------------- |
| 84 | a) NOR boot |
| 85 | b) NAND boot |
| Priyanka Jain | 7d05b99 | 2017-04-28 10:41:35 +0530 | [diff] [blame] | 86 | c) QSPI boot |
| 87 | |
| Santan Kumar | 0f0173d | 2017-04-28 12:47:24 +0530 | [diff] [blame] | 88 | Memory map for NOR boot |
| 89 | ------------------------- |
| 90 | Image Flash Offset |
| 91 | RCW+PBI 0x00000000 |
| 92 | Boot firmware (U-Boot) 0x00100000 |
| 93 | Boot firmware Environment 0x00300000 |
| 94 | PPA firmware 0x00400000 |
| Udit Agarwal | d11fed7 | 2017-05-02 17:43:57 +0530 | [diff] [blame] | 95 | Secure Headers 0x00600000 |
| Santan Kumar | 0f0173d | 2017-04-28 12:47:24 +0530 | [diff] [blame] | 96 | Cortina PHY firmware 0x00980000 |
| 97 | DPAA2 MC 0x00A00000 |
| 98 | DPAA2 DPL 0x00D00000 |
| 99 | DPAA2 DPC 0x00E00000 |
| 100 | Kernel.itb 0x01000000 |
| 101 | |
| Priyanka Jain | 7d05b99 | 2017-04-28 10:41:35 +0530 | [diff] [blame] | 102 | cfg_rcw_src switches needs to be changed for booting from different option. |
| 103 | Refer to board documentation for correct switch setting. |
| 104 | |
| 105 | QSPI boot details |
| 106 | =================== |
| 107 | Supported only for |
| 108 | LS2088ARDB RevF board with LS2088A SoC. |
| 109 | |
| 110 | Images needs to be copied to QSPI flash |
| 111 | as per memory map given below. |
| 112 | |
| 113 | Memory map for QSPI flash |
| 114 | ------------------------- |
| 115 | Image Flash Offset |
| 116 | RCW+PBI 0x00000000 |
| 117 | Boot firmware (U-Boot) 0x00100000 |
| 118 | Boot firmware Environment 0x00300000 |
| 119 | PPA firmware 0x00400000 |
| 120 | Cortina PHY firmware 0x00980000 |
| 121 | DPAA2 MC 0x00A00000 |
| 122 | DPAA2 DPL 0x00D00000 |
| 123 | DPAA2 DPC 0x00E00000 |
| 124 | Kernel.itb 0x01000000 |
| Bhupesh Sharma | 0b10a1a | 2015-05-28 14:54:10 +0530 | [diff] [blame] | 125 | |
| 126 | Booting Linux flavors which do not support 48-bit VA (< Linux 3.18) |
| 127 | ------------------------------------------------------------------- |
| 128 | One needs to use appropriate bootargs to boot Linux flavors which do |
| 129 | not support 48-bit VA (for e.g. < Linux 3.18) by appending mem=2048M, as shown |
| 130 | below: |
| 131 | |
| 132 | => setenv bootargs 'console=ttyS1,115200 root=/dev/ram |
| 133 | earlycon=uart8250,mmio,0x21c0600,115200 default_hugepagesz=2m hugepagesz=2m |
| 134 | hugepages=16 mem=2048M' |