| Aleksandar Gerasimovski | 3b24bbd | 2021-06-08 14:16:28 +0000 | [diff] [blame^] | 1 | /* SPDX-License-Identifier: GPL-2.0+ */ |
| 2 | /* |
| 3 | * Copyright 2020 Hitachi ABB Power Grids |
| 4 | */ |
| 5 | |
| 6 | #ifndef __CONFIG_PG_WCOM_EXPU1_H |
| 7 | #define __CONFIG_PG_WCOM_EXPU1_H |
| 8 | |
| 9 | #define WCOM_EXPU1 |
| 10 | #define CONFIG_HOSTNAME "EXPU1" |
| 11 | |
| 12 | #define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" |
| 13 | #define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1" |
| 14 | |
| 15 | /* CLIPS FPGA Definitions */ |
| 16 | #define CONFIG_SYS_CSPR3_EXT (0x00) |
| 17 | #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CLIPS_BASE) | \ |
| 18 | CSPR_PORT_SIZE_8 | \ |
| 19 | CSPR_MSEL_GPCM | \ |
| 20 | CSPR_V) |
| 21 | #define CONFIG_SYS_AMASK3 IFC_AMASK(64 * 1024) |
| 22 | #define CONFIG_SYS_CSOR3 (CSOR_GPCM_ADM_SHIFT(0x4) | \ |
| 23 | CSOR_GPCM_TRHZ_40) |
| 24 | #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \ |
| 25 | FTIM0_GPCM_TEADC(0x7) | \ |
| 26 | FTIM0_GPCM_TEAHC(0x2)) |
| 27 | #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x2) | \ |
| 28 | FTIM1_GPCM_TRAD(0x12)) |
| 29 | #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x3) | \ |
| 30 | FTIM2_GPCM_TCH(0x1) | \ |
| 31 | FTIM2_GPCM_TWP(0x12)) |
| 32 | #define CONFIG_SYS_CS3_FTIM3 0x04000000 |
| 33 | |
| 34 | /* PRST */ |
| 35 | #define WCOM_CLIPS_RST 0 |
| 36 | #define WCOM_QSFP_RST 1 |
| 37 | #define WCOM_PHY_RST 2 |
| 38 | #define WCOM_TMG_RST 3 |
| 39 | #define KM_DBG_ETH_RST 15 |
| 40 | |
| 41 | /* QRIO GPIOs used for deblocking */ |
| 42 | #define KM_I2C_DEBLOCK_PORT QRIO_GPIO_A |
| 43 | #define KM_I2C_DEBLOCK_SCL 20 |
| 44 | #define KM_I2C_DEBLOCK_SDA 21 |
| 45 | |
| 46 | /* ZL30343 on SPI */ |
| 47 | #define WCOM_ZL30343_CFG_ADDR 0xe8070000 |
| 48 | #define WCOM_ZL30343_SPI_BUS 0 |
| 49 | #define WCOM_ZL30343_CS 0 |
| 50 | |
| 51 | #include "km/pg-wcom-ls102xa.h" |
| 52 | |
| 53 | #endif /* __CONFIG_PG_WCOM_EXPU1_H */ |