Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 32c544d04a51021ec6e8ec3b18bc4d4ad7b34d9c / . / include / configs / etamin.h
blob: ef9f330a0946537797184397fa11b0a1c0b4d461 [file] [log] [blame]
Heiko Schochercbec11a2016-06-07 08:55:45 +0200[diff] [blame]1/*
2 * (C) Copyright 2013 Siemens Schweiz AG
3 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
4 *
5 * Based on:
6 * U-Boot file:/include/configs/am335x_evm.h
7 *
8 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
9 *
10 * SPDX-License-Identifier: GPL-2.0+
11 */
12
13#ifndef __CONFIG_ETAMIN_H
14#define __CONFIG_ETAMIN_H
15
16#include "siemens-am33x-common.h"
17/* NAND specific changes for etamin due to different page size */
18#undef CONFIG_SYS_NAND_PAGE_SIZE
19#undef CONFIG_SYS_NAND_OOBSIZE
20#undef CONFIG_SYS_NAND_BLOCK_SIZE
21#undef CONFIG_SYS_NAND_ECCPOS
22#undef CONFIG_SYS_NAND_U_BOOT_OFFS
23#undef CONFIG_SYS_ENV_SECT_SIZE
24#undef CONFIG_ENV_OFFSET
25#undef CONFIG_NAND_OMAP_ECCSCHEME
26#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW
27
28#define CONFIG_ENV_OFFSET 0x980000
29#define CONFIG_SYS_ENV_SECT_SIZE (512 << 10) /* 512 KiB */
30#define CONFIG_SYS_NAND_PAGE_SIZE 4096
31#define CONFIG_SYS_NAND_OOBSIZE 224
32#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * CONFIG_SYS_NAND_PAGE_SIZE)
33#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
34 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \
35 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \
36 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \
37 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, \
38 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \
39 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, \
40 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \
41 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, \
42 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, \
43 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, \
44 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, \
45 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, \
46 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, \
47 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, \
48 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, \
49 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, \
50 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, \
51 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, \
52 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \
53 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \
54 }
55
56#undef CONFIG_SYS_NAND_ECCSIZE
57#undef CONFIG_SYS_NAND_ECCBYTES
58#define CONFIG_SYS_NAND_ECCSIZE 512
59#define CONFIG_SYS_NAND_ECCBYTES 26
60
61#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
62
63#define CONFIG_SYS_NAND_MAX_CHIPS 1
64
65#undef CONFIG_SYS_MAX_NAND_DEVICE
66#define CONFIG_SYS_MAX_NAND_DEVICE 3
67#define CONFIG_SYS_NAND_BASE2 (0x18000000) /* physical address */
68#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \
69 CONFIG_SYS_NAND_BASE2}
70
71#define CONFIG_SYS_NAND_ONFI_DETECTION
Heiko Schochercbec11a2016-06-07 08:55:45 +0200[diff] [blame]72#define DDR_PLL_FREQ 303
73#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
74
75/* FWD Button = 27
76 * SRV Button = 87 */
77#define BOARD_DFU_BUTTON_GPIO 27
78#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */
79/* In dfu mode keep led1 on */
80#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
81 "button_dfu0=27\0" \
82 "button_dfu1=87\0" \
83 "led0=3,0,1\0" \
84 "led1=4,0,0\0" \
85 "led2=5,0,1\0" \
86 "led3=87,0,1\0" \
87 "led4=60,0,1\0" \
88 "led5=63,0,1\0"
89
Heiko Schochercbec11a2016-06-07 08:55:45 +0200[diff] [blame]90/* Physical Memory Map */
91#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
92
93/* I2C Configuration */
94#define CONFIG_SYS_I2C_SPEED 100000
95
96#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
97#define EEPROM_ADDR_DDR3 0x90
98#define EEPROM_ADDR_CHIP 0x120
99
Heiko Schochercbec11a2016-06-07 08:55:45 +0200[diff] [blame]100#undef CONFIG_MII
Heiko Schochercbec11a2016-06-07 08:55:45 +0200[diff] [blame]101#define CONFIG_PHY_SMSC
102
103#define CONFIG_FACTORYSET
104
105/* use both define to compile a SPL compliance test */
106/*
107#define CONFIG_SPL_CMT
108#define CONFIG_SPL_CMT_DEBUG
109*/
110
111/* nedded by compliance test in read mode */
112#if defined(CONFIG_SPL_CMT)
113#define CONFIG_SYS_DCACHE_OFF
114#endif
115
Heiko Schochercbec11a2016-06-07 08:55:45 +0200[diff] [blame]116/* Define own nand partitions */
117#define CONFIG_ENV_OFFSET_REDUND 0xB80000
118#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
119#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE)
120
121
122
Heiko Schochercbec11a2016-06-07 08:55:45 +0200[diff] [blame]123#undef COMMON_ENV_DFU_ARGS
124#define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \
125 "setenv bootargs ${bootargs};" \
126 "mtdparts default;" \
127 "draco_led 1;" \
128 "dfu 0 mtd 0;" \
129 "draco_led 0;\0" \
130
131#undef DFU_ALT_INFO_NAND_V2
132#define DFU_ALT_INFO_NAND_V2 \
133 "spl mtddev;" \
134 "spl.backup1 mtddev;" \
135 "spl.backup2 mtddev;" \
136 "spl.backup3 mtddev;" \
137 "u-boot mtddev;" \
138 "u-boot.env0 mtddev;" \
139 "u-boot.env1 mtddev;" \
140 "rootfs mtddevubi" \
141
Heiko Schochercbec11a2016-06-07 08:55:45 +0200[diff] [blame]142#undef CONFIG_ENV_SETTINGS_NAND_V2
143#define CONFIG_ENV_SETTINGS_NAND_V2 \
144 "nand_active_ubi_vol=rootfs_a\0" \
145 "rootfs_name=rootfs\0" \
146 "kernel_name=uImage\0"\
147 "nand_root_fs_type=ubifs rootwait=1\0" \
148 "nand_args=run bootargs_defaults;" \
149 "mtdparts default;" \
150 "setenv ${partitionset_active} true;" \
151 "if test -n ${A}; then " \
152 "setenv nand_active_ubi_vol ${rootfs_name}_a;" \
153 "fi;" \
154 "if test -n ${B}; then " \
155 "setenv nand_active_ubi_vol ${rootfs_name}_b;" \
156 "fi;" \
157 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
158 "ubi.mtd=rootfs,${ubi_off};" \
159 "setenv bootargs ${bootargs} " \
160 "root=${nand_root} noinitrd ${mtdparts} " \
161 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
162 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
163 "=mtdoops\0" \
164 COMMON_ENV_DFU_ARGS \
165 "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \
166 COMMON_ENV_NAND_BOOT \
167 "ubi part rootfs ${ubi_off};" \
168 "ubifsmount ubi0:${nand_active_ubi_vol};" \
169 "ubifsload ${kloadaddr} boot/${kernel_name};" \
170 "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \
171 "bootm ${kloadaddr} - ${loadaddr}\0" \
172 "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \
173 "bootm ${kloadaddr} - ${loadaddr}\0" \
174 COMMON_ENV_NAND_CMDS
175
176#ifndef CONFIG_SPL_BUILD
177
178#define CONFIG_NAND_CS_INIT
179#define ETAMIN_NAND_GPMC_CONFIG1 0x00000800
180#define ETAMIN_NAND_GPMC_CONFIG2 0x001e1e00
181#define ETAMIN_NAND_GPMC_CONFIG3 0x001e1e00
182#define ETAMIN_NAND_GPMC_CONFIG4 0x16051807
183#define ETAMIN_NAND_GPMC_CONFIG5 0x00151e1e
184#define ETAMIN_NAND_GPMC_CONFIG6 0x16000f80
185#define CONFIG_MTD_CONCAT
186
187/* Default env settings */
188#define CONFIG_EXTRA_ENV_SETTINGS \
189 "hostname=etamin\0" \
190 "ubi_off=4096\0"\
191 "nand_img_size=0x400000\0" \
192 "optargs=\0" \
193 "preboot=draco_led 0\0" \
194 CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
195 CONFIG_ENV_SETTINGS_V2 \
196 CONFIG_ENV_SETTINGS_NAND_V2
197
198#ifndef CONFIG_RESTORE_FLASH
199
200#define CONFIG_BOOTCOMMAND \
201"if dfubutton; then " \
202 "run dfu_start; " \
203 "reset; " \
204"fi;" \
205"run nand_boot;" \
206"run nand_boot_backup;" \
207"reset;"
208
209
210#else
211#define CONFIG_BOOTCOMMAND \
212 "setenv autoload no; " \
213 "dhcp; " \
214 "if tftp 80000000 debrick.scr; then " \
215 "source 80000000; " \
216 "fi"
217#endif
218#endif /* CONFIG_SPL_BUILD */
219#endif /* ! __CONFIG_ETAMIN_H */