Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / cbec11a2f27a0469d690d5f1c20071c2d9910968 / . / include / configs / etamin.h
blob: 4919cfe3536462fa3a8d62a90f660d6ff5e0bf14 [file] [log] [blame]
Heiko Schochercbec11a2016-06-07 08:55:45 +0200[diff] [blame^]1/*
2 * (C) Copyright 2013 Siemens Schweiz AG
3 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
4 *
5 * Based on:
6 * U-Boot file:/include/configs/am335x_evm.h
7 *
8 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
9 *
10 * SPDX-License-Identifier: GPL-2.0+
11 */
12
13#ifndef __CONFIG_ETAMIN_H
14#define __CONFIG_ETAMIN_H
15
16#include "siemens-am33x-common.h"
17/* NAND specific changes for etamin due to different page size */
18#undef CONFIG_SYS_NAND_PAGE_SIZE
19#undef CONFIG_SYS_NAND_OOBSIZE
20#undef CONFIG_SYS_NAND_BLOCK_SIZE
21#undef CONFIG_SYS_NAND_ECCPOS
22#undef CONFIG_SYS_NAND_U_BOOT_OFFS
23#undef CONFIG_SYS_ENV_SECT_SIZE
24#undef CONFIG_ENV_OFFSET
25#undef CONFIG_NAND_OMAP_ECCSCHEME
26#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW
27
28#define CONFIG_ENV_OFFSET 0x980000
29#define CONFIG_SYS_ENV_SECT_SIZE (512 << 10) /* 512 KiB */
30#define CONFIG_SYS_NAND_PAGE_SIZE 4096
31#define CONFIG_SYS_NAND_OOBSIZE 224
32#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * CONFIG_SYS_NAND_PAGE_SIZE)
33#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
34 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \
35 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \
36 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \
37 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, \
38 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \
39 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, \
40 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \
41 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, \
42 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, \
43 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, \
44 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, \
45 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, \
46 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, \
47 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, \
48 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, \
49 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, \
50 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, \
51 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, \
52 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \
53 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \
54 }
55
56#undef CONFIG_SYS_NAND_ECCSIZE
57#undef CONFIG_SYS_NAND_ECCBYTES
58#define CONFIG_SYS_NAND_ECCSIZE 512
59#define CONFIG_SYS_NAND_ECCBYTES 26
60
61#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
62
63#define CONFIG_SYS_NAND_MAX_CHIPS 1
64
65#undef CONFIG_SYS_MAX_NAND_DEVICE
66#define CONFIG_SYS_MAX_NAND_DEVICE 3
67#define CONFIG_SYS_NAND_BASE2 (0x18000000) /* physical address */
68#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \
69 CONFIG_SYS_NAND_BASE2}
70
71#define CONFIG_SYS_NAND_ONFI_DETECTION
72#define CONFIG_DISPLAY_CPUINFO
73#define CONFIG_SYS_MPUCLK 300
74#define DDR_PLL_FREQ 303
75#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
76
77/* FWD Button = 27
78 * SRV Button = 87 */
79#define BOARD_DFU_BUTTON_GPIO 27
80#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */
81/* In dfu mode keep led1 on */
82#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
83 "button_dfu0=27\0" \
84 "button_dfu1=87\0" \
85 "led0=3,0,1\0" \
86 "led1=4,0,0\0" \
87 "led2=5,0,1\0" \
88 "led3=87,0,1\0" \
89 "led4=60,0,1\0" \
90 "led5=63,0,1\0"
91
92#undef CONFIG_DOS_PARTITION
93#undef CONFIG_CMD_FAT
94
95#define CONFIG_BOARD_LATE_INIT
96
97/* Physical Memory Map */
98#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
99
100/* I2C Configuration */
101#define CONFIG_SYS_I2C_SPEED 100000
102
103#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
104#define EEPROM_ADDR_DDR3 0x90
105#define EEPROM_ADDR_CHIP 0x120
106
107#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300
108
109#undef CONFIG_SPL_NET_SUPPORT
110#undef CONFIG_SPL_NET_VCI_STRING
111#undef CONFIG_SPL_ETH_SUPPORT
112
113#undef CONFIG_MII
114#undef CONFIG_PHY_GIGE
115#define CONFIG_PHY_SMSC
116
117#define CONFIG_FACTORYSET
118
119/* use both define to compile a SPL compliance test */
120/*
121#define CONFIG_SPL_CMT
122#define CONFIG_SPL_CMT_DEBUG
123*/
124
125/* nedded by compliance test in read mode */
126#if defined(CONFIG_SPL_CMT)
127#define CONFIG_SYS_DCACHE_OFF
128#endif
129
130/* Watchdog */
131#define CONFIG_OMAP_WATCHDOG
132
133/* Define own nand partitions */
134#define CONFIG_ENV_OFFSET_REDUND 0xB80000
135#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
136#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE)
137
138
139
140#define CONFIG_DFU_MTD
141#undef COMMON_ENV_DFU_ARGS
142#define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \
143 "setenv bootargs ${bootargs};" \
144 "mtdparts default;" \
145 "draco_led 1;" \
146 "dfu 0 mtd 0;" \
147 "draco_led 0;\0" \
148
149#undef DFU_ALT_INFO_NAND_V2
150#define DFU_ALT_INFO_NAND_V2 \
151 "spl mtddev;" \
152 "spl.backup1 mtddev;" \
153 "spl.backup2 mtddev;" \
154 "spl.backup3 mtddev;" \
155 "u-boot mtddev;" \
156 "u-boot.env0 mtddev;" \
157 "u-boot.env1 mtddev;" \
158 "rootfs mtddevubi" \
159
160#undef MTDIDS_NAME_STR
161#define MTDIDS_NAME_STR "omap2-nand_concat"
162#undef MTDIDS_DEFAULT
163#define MTDIDS_DEFAULT "nand2=" MTDIDS_NAME_STR
164
165#undef MTDPARTS_DEFAULT_V2
166#define MTDPARTS_DEFAULT_V2 "mtdparts=" MTDIDS_NAME_STR ":" \
167 "512k(spl)," \
168 "512k(spl.backup1)," \
169 "512k(spl.backup2)," \
170 "512k(spl.backup3)," \
171 "7680k(u-boot)," \
172 "2048k(u-boot.env0)," \
173 "2048k(u-boot.env1)," \
174 "2048k(mtdoops)," \
175 "-(rootfs)"
176
177#undef MTDPARTS_DEFAULT
178#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V2
179
180#undef CONFIG_ENV_SETTINGS_NAND_V2
181#define CONFIG_ENV_SETTINGS_NAND_V2 \
182 "nand_active_ubi_vol=rootfs_a\0" \
183 "rootfs_name=rootfs\0" \
184 "kernel_name=uImage\0"\
185 "nand_root_fs_type=ubifs rootwait=1\0" \
186 "nand_args=run bootargs_defaults;" \
187 "mtdparts default;" \
188 "setenv ${partitionset_active} true;" \
189 "if test -n ${A}; then " \
190 "setenv nand_active_ubi_vol ${rootfs_name}_a;" \
191 "fi;" \
192 "if test -n ${B}; then " \
193 "setenv nand_active_ubi_vol ${rootfs_name}_b;" \
194 "fi;" \
195 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
196 "ubi.mtd=rootfs,${ubi_off};" \
197 "setenv bootargs ${bootargs} " \
198 "root=${nand_root} noinitrd ${mtdparts} " \
199 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
200 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
201 "=mtdoops\0" \
202 COMMON_ENV_DFU_ARGS \
203 "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \
204 COMMON_ENV_NAND_BOOT \
205 "ubi part rootfs ${ubi_off};" \
206 "ubifsmount ubi0:${nand_active_ubi_vol};" \
207 "ubifsload ${kloadaddr} boot/${kernel_name};" \
208 "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \
209 "bootm ${kloadaddr} - ${loadaddr}\0" \
210 "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \
211 "bootm ${kloadaddr} - ${loadaddr}\0" \
212 COMMON_ENV_NAND_CMDS
213
214#ifndef CONFIG_SPL_BUILD
215
216#define CONFIG_NAND_CS_INIT
217#define ETAMIN_NAND_GPMC_CONFIG1 0x00000800
218#define ETAMIN_NAND_GPMC_CONFIG2 0x001e1e00
219#define ETAMIN_NAND_GPMC_CONFIG3 0x001e1e00
220#define ETAMIN_NAND_GPMC_CONFIG4 0x16051807
221#define ETAMIN_NAND_GPMC_CONFIG5 0x00151e1e
222#define ETAMIN_NAND_GPMC_CONFIG6 0x16000f80
223#define CONFIG_MTD_CONCAT
224
225/* Default env settings */
226#define CONFIG_EXTRA_ENV_SETTINGS \
227 "hostname=etamin\0" \
228 "ubi_off=4096\0"\
229 "nand_img_size=0x400000\0" \
230 "optargs=\0" \
231 "preboot=draco_led 0\0" \
232 CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
233 CONFIG_ENV_SETTINGS_V2 \
234 CONFIG_ENV_SETTINGS_NAND_V2
235
236#ifndef CONFIG_RESTORE_FLASH
237
238#define CONFIG_BOOTCOMMAND \
239"if dfubutton; then " \
240 "run dfu_start; " \
241 "reset; " \
242"fi;" \
243"run nand_boot;" \
244"run nand_boot_backup;" \
245"reset;"
246
247
248#else
249#define CONFIG_BOOTCOMMAND \
250 "setenv autoload no; " \
251 "dhcp; " \
252 "if tftp 80000000 debrick.scr; then " \
253 "source 80000000; " \
254 "fi"
255#endif
256#endif /* CONFIG_SPL_BUILD */
257#endif /* ! __CONFIG_ETAMIN_H */