Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | /* |
| 3 | * Copyright 2019 NXP |
| 4 | */ |
| 5 | |
| 6 | #include <dt-bindings/usb/pd.h> |
| 7 | #include "imx8mn.dtsi" |
| 8 | |
| 9 | / { |
| 10 | chosen { |
| 11 | stdout-path = &uart2; |
| 12 | }; |
| 13 | |
| 14 | gpio-leds { |
| 15 | compatible = "gpio-leds"; |
| 16 | pinctrl-names = "default"; |
| 17 | pinctrl-0 = <&pinctrl_gpio_led>; |
| 18 | |
| 19 | status { |
| 20 | label = "yellow:status"; |
| 21 | gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; |
| 22 | default-state = "on"; |
| 23 | }; |
| 24 | }; |
| 25 | |
| 26 | memory@40000000 { |
| 27 | device_type = "memory"; |
| 28 | reg = <0x0 0x40000000 0 0x80000000>; |
| 29 | }; |
| 30 | |
| 31 | reg_usdhc2_vmmc: regulator-usdhc2 { |
| 32 | compatible = "regulator-fixed"; |
| 33 | pinctrl-names = "default"; |
| 34 | pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; |
| 35 | regulator-name = "VSD_3V3"; |
| 36 | regulator-min-microvolt = <3300000>; |
| 37 | regulator-max-microvolt = <3300000>; |
| 38 | gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; |
| 39 | enable-active-high; |
| 40 | }; |
| 41 | |
| 42 | ir-receiver { |
| 43 | compatible = "gpio-ir-receiver"; |
| 44 | gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; |
| 45 | pinctrl-names = "default"; |
| 46 | pinctrl-0 = <&pinctrl_ir>; |
| 47 | linux,autosuspend-period = <125>; |
| 48 | }; |
Marcel Ziswiler | a1033b8 | 2022-07-21 15:43:37 +0200 | [diff] [blame] | 49 | |
| 50 | wm8524: audio-codec { |
| 51 | #sound-dai-cells = <0>; |
| 52 | compatible = "wlf,wm8524"; |
| 53 | pinctrl-names = "default"; |
| 54 | pinctrl-0 = <&pinctrl_gpio_wlf>; |
| 55 | wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; |
| 56 | clocks = <&clk IMX8MN_CLK_SAI3_ROOT>; |
| 57 | clock-names = "mclk"; |
| 58 | }; |
| 59 | |
| 60 | sound-wm8524 { |
| 61 | compatible = "fsl,imx-audio-wm8524"; |
| 62 | model = "wm8524-audio"; |
| 63 | audio-cpu = <&sai3>; |
| 64 | audio-codec = <&wm8524>; |
| 65 | audio-asrc = <&easrc>; |
| 66 | audio-routing = |
| 67 | "Line Out Jack", "LINEVOUTL", |
| 68 | "Line Out Jack", "LINEVOUTR"; |
| 69 | }; |
| 70 | |
| 71 | sound-spdif { |
| 72 | compatible = "fsl,imx-audio-spdif"; |
| 73 | model = "imx-spdif"; |
| 74 | spdif-controller = <&spdif1>; |
| 75 | spdif-out; |
| 76 | spdif-in; |
| 77 | }; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 78 | }; |
| 79 | |
Marcel Ziswiler | a1033b8 | 2022-07-21 15:43:37 +0200 | [diff] [blame] | 80 | &easrc { |
| 81 | fsl,asrc-rate = <48000>; |
| 82 | status = "okay"; |
| 83 | }; |
| 84 | |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 85 | &fec1 { |
| 86 | pinctrl-names = "default"; |
| 87 | pinctrl-0 = <&pinctrl_fec1>; |
| 88 | phy-mode = "rgmii-id"; |
| 89 | phy-handle = <ðphy0>; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 90 | fsl,magic-packet; |
| 91 | status = "okay"; |
| 92 | |
| 93 | mdio { |
| 94 | #address-cells = <1>; |
| 95 | #size-cells = <0>; |
| 96 | |
| 97 | ethphy0: ethernet-phy@0 { |
| 98 | compatible = "ethernet-phy-ieee802.3-c22"; |
| 99 | reg = <0>; |
Heiko Thiery | ab74a3e | 2022-02-23 10:48:26 +0100 | [diff] [blame] | 100 | reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; |
| 101 | reset-assert-us = <10000>; |
Heiko Thiery | 3659be0 | 2022-02-23 10:48:28 +0100 | [diff] [blame] | 102 | qca,disable-smarteee; |
Heiko Thiery | 26eaca6 | 2022-02-23 09:10:29 +0100 | [diff] [blame] | 103 | vddio-supply = <&vddio>; |
| 104 | |
| 105 | vddio: vddio-regulator { |
| 106 | regulator-min-microvolt = <1800000>; |
| 107 | regulator-max-microvolt = <1800000>; |
| 108 | }; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 109 | }; |
| 110 | }; |
| 111 | }; |
| 112 | |
Marcel Ziswiler | a1033b8 | 2022-07-21 15:43:37 +0200 | [diff] [blame] | 113 | &flexspi { |
| 114 | pinctrl-names = "default"; |
| 115 | pinctrl-0 = <&pinctrl_flexspi>; |
| 116 | status = "okay"; |
| 117 | |
| 118 | flash0: flash@0 { |
| 119 | compatible = "jedec,spi-nor"; |
| 120 | reg = <0>; |
| 121 | #address-cells = <1>; |
| 122 | #size-cells = <1>; |
| 123 | spi-max-frequency = <166000000>; |
| 124 | spi-tx-bus-width = <4>; |
| 125 | spi-rx-bus-width = <4>; |
| 126 | }; |
| 127 | }; |
| 128 | |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 129 | &i2c1 { |
| 130 | clock-frequency = <400000>; |
| 131 | pinctrl-names = "default"; |
| 132 | pinctrl-0 = <&pinctrl_i2c1>; |
| 133 | status = "okay"; |
| 134 | }; |
| 135 | |
| 136 | &i2c2 { |
| 137 | clock-frequency = <400000>; |
| 138 | pinctrl-names = "default"; |
| 139 | pinctrl-0 = <&pinctrl_i2c2>; |
| 140 | status = "okay"; |
| 141 | |
| 142 | ptn5110: tcpc@50 { |
| 143 | compatible = "nxp,ptn5110"; |
| 144 | pinctrl-names = "default"; |
| 145 | pinctrl-0 = <&pinctrl_typec1>; |
| 146 | reg = <0x50>; |
| 147 | interrupt-parent = <&gpio2>; |
| 148 | interrupts = <11 IRQ_TYPE_LEVEL_LOW>; |
| 149 | status = "okay"; |
| 150 | |
| 151 | port { |
| 152 | typec1_dr_sw: endpoint { |
| 153 | remote-endpoint = <&usb1_drd_sw>; |
| 154 | }; |
| 155 | }; |
| 156 | |
| 157 | typec1_con: connector { |
| 158 | compatible = "usb-c-connector"; |
| 159 | label = "USB-C"; |
| 160 | power-role = "dual"; |
| 161 | data-role = "dual"; |
| 162 | try-power-role = "sink"; |
| 163 | source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; |
| 164 | sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) |
| 165 | PDO_VAR(5000, 20000, 3000)>; |
| 166 | op-sink-microwatt = <15000000>; |
| 167 | self-powered; |
| 168 | }; |
| 169 | }; |
| 170 | }; |
| 171 | |
| 172 | &i2c3 { |
| 173 | clock-frequency = <400000>; |
| 174 | pinctrl-names = "default"; |
| 175 | pinctrl-0 = <&pinctrl_i2c3>; |
| 176 | status = "okay"; |
| 177 | |
| 178 | pca6416: gpio@20 { |
| 179 | compatible = "ti,tca6416"; |
| 180 | reg = <0x20>; |
| 181 | gpio-controller; |
| 182 | #gpio-cells = <2>; |
| 183 | }; |
| 184 | }; |
| 185 | |
Marcel Ziswiler | a1033b8 | 2022-07-21 15:43:37 +0200 | [diff] [blame] | 186 | &sai3 { |
| 187 | pinctrl-names = "default"; |
| 188 | pinctrl-0 = <&pinctrl_sai3>; |
| 189 | assigned-clocks = <&clk IMX8MN_CLK_SAI3>; |
| 190 | assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>; |
| 191 | assigned-clock-rates = <24576000>; |
| 192 | fsl,sai-mclk-direction-output; |
| 193 | status = "okay"; |
| 194 | }; |
| 195 | |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 196 | &snvs_pwrkey { |
| 197 | status = "okay"; |
| 198 | }; |
| 199 | |
Marcel Ziswiler | a1033b8 | 2022-07-21 15:43:37 +0200 | [diff] [blame] | 200 | &spdif1 { |
| 201 | pinctrl-names = "default"; |
| 202 | pinctrl-0 = <&pinctrl_spdif1>; |
| 203 | assigned-clocks = <&clk IMX8MN_CLK_SPDIF1>; |
| 204 | assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>; |
| 205 | assigned-clock-rates = <24576000>; |
| 206 | status = "okay"; |
| 207 | }; |
| 208 | |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 209 | &uart2 { /* console */ |
| 210 | pinctrl-names = "default"; |
| 211 | pinctrl-0 = <&pinctrl_uart2>; |
| 212 | status = "okay"; |
| 213 | }; |
| 214 | |
Marcel Ziswiler | a1033b8 | 2022-07-21 15:43:37 +0200 | [diff] [blame] | 215 | &uart3 { |
| 216 | pinctrl-names = "default"; |
| 217 | pinctrl-0 = <&pinctrl_uart3>; |
| 218 | assigned-clocks = <&clk IMX8MN_CLK_UART3>; |
| 219 | assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>; |
| 220 | uart-has-rtscts; |
| 221 | status = "okay"; |
| 222 | }; |
| 223 | |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 224 | &usbotg1 { |
| 225 | dr_mode = "otg"; |
| 226 | hnp-disable; |
| 227 | srp-disable; |
| 228 | adp-disable; |
| 229 | usb-role-switch; |
Marcel Ziswiler | a1033b8 | 2022-07-21 15:43:37 +0200 | [diff] [blame] | 230 | disable-over-current; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 231 | samsung,picophy-pre-emp-curr-control = <3>; |
| 232 | samsung,picophy-dc-vol-level-adjust = <7>; |
| 233 | status = "okay"; |
| 234 | |
| 235 | port { |
| 236 | usb1_drd_sw: endpoint { |
| 237 | remote-endpoint = <&typec1_dr_sw>; |
| 238 | }; |
| 239 | }; |
| 240 | }; |
| 241 | |
| 242 | &usdhc2 { |
| 243 | assigned-clocks = <&clk IMX8MN_CLK_USDHC2>; |
| 244 | assigned-clock-rates = <200000000>; |
| 245 | pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| 246 | pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; |
| 247 | pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; |
| 248 | pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; |
| 249 | cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; |
| 250 | bus-width = <4>; |
| 251 | vmmc-supply = <®_usdhc2_vmmc>; |
| 252 | status = "okay"; |
| 253 | }; |
| 254 | |
| 255 | &usdhc3 { |
| 256 | assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>; |
| 257 | assigned-clock-rates = <400000000>; |
| 258 | pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| 259 | pinctrl-0 = <&pinctrl_usdhc3>; |
| 260 | pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
| 261 | pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
| 262 | bus-width = <8>; |
| 263 | non-removable; |
| 264 | status = "okay"; |
| 265 | }; |
| 266 | |
| 267 | &wdog1 { |
| 268 | pinctrl-names = "default"; |
| 269 | pinctrl-0 = <&pinctrl_wdog>; |
| 270 | fsl,ext-reset-output; |
| 271 | status = "okay"; |
| 272 | }; |
| 273 | |
| 274 | &iomuxc { |
| 275 | pinctrl_fec1: fec1grp { |
| 276 | fsl,pins = < |
| 277 | MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3 |
| 278 | MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 |
| 279 | MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f |
| 280 | MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f |
| 281 | MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f |
| 282 | MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f |
| 283 | MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 |
| 284 | MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 |
| 285 | MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 |
| 286 | MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 |
| 287 | MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f |
| 288 | MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 |
| 289 | MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 |
| 290 | MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f |
| 291 | MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 |
| 292 | >; |
| 293 | }; |
| 294 | |
Marcel Ziswiler | a1033b8 | 2022-07-21 15:43:37 +0200 | [diff] [blame] | 295 | pinctrl_flexspi: flexspigrp { |
| 296 | fsl,pins = < |
| 297 | MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2 |
| 298 | MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 |
| 299 | MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 |
| 300 | MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 |
| 301 | MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 |
| 302 | MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 |
| 303 | >; |
| 304 | }; |
| 305 | |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 306 | pinctrl_gpio_led: gpioledgrp { |
| 307 | fsl,pins = < |
| 308 | MX8MN_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 |
| 309 | >; |
| 310 | }; |
| 311 | |
Marcel Ziswiler | a1033b8 | 2022-07-21 15:43:37 +0200 | [diff] [blame] | 312 | pinctrl_gpio_wlf: gpiowlfgrp { |
| 313 | fsl,pins = < |
| 314 | MX8MN_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6 |
| 315 | >; |
| 316 | }; |
| 317 | |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 318 | pinctrl_ir: irgrp { |
| 319 | fsl,pins = < |
| 320 | MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x4f |
| 321 | >; |
| 322 | }; |
| 323 | |
| 324 | pinctrl_i2c1: i2c1grp { |
| 325 | fsl,pins = < |
| 326 | MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 |
| 327 | MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 |
| 328 | >; |
| 329 | }; |
| 330 | |
| 331 | pinctrl_i2c2: i2c2grp { |
| 332 | fsl,pins = < |
| 333 | MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 |
| 334 | MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 |
| 335 | >; |
| 336 | }; |
| 337 | |
| 338 | pinctrl_i2c3: i2c3grp { |
| 339 | fsl,pins = < |
| 340 | MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 |
| 341 | MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 |
| 342 | >; |
| 343 | }; |
| 344 | |
| 345 | pinctrl_pmic: pmicirqgrp { |
| 346 | fsl,pins = < |
| 347 | MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141 |
| 348 | >; |
| 349 | }; |
| 350 | |
| 351 | pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { |
| 352 | fsl,pins = < |
| 353 | MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 |
| 354 | >; |
| 355 | }; |
| 356 | |
Marcel Ziswiler | a1033b8 | 2022-07-21 15:43:37 +0200 | [diff] [blame] | 357 | pinctrl_sai3: sai3grp { |
| 358 | fsl,pins = < |
| 359 | MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 |
| 360 | MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 |
| 361 | MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 |
| 362 | MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 |
| 363 | >; |
| 364 | }; |
| 365 | |
| 366 | pinctrl_spdif1: spdif1grp { |
| 367 | fsl,pins = < |
| 368 | MX8MN_IOMUXC_SPDIF_TX_SPDIF1_OUT 0xd6 |
| 369 | MX8MN_IOMUXC_SPDIF_RX_SPDIF1_IN 0xd6 |
| 370 | >; |
| 371 | }; |
| 372 | |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 373 | pinctrl_typec1: typec1grp { |
| 374 | fsl,pins = < |
| 375 | MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159 |
| 376 | >; |
| 377 | }; |
| 378 | |
| 379 | pinctrl_uart2: uart2grp { |
| 380 | fsl,pins = < |
| 381 | MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 |
| 382 | MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 |
| 383 | >; |
| 384 | }; |
| 385 | |
Marcel Ziswiler | a1033b8 | 2022-07-21 15:43:37 +0200 | [diff] [blame] | 386 | pinctrl_uart3: uart3grp { |
| 387 | fsl,pins = < |
| 388 | MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x140 |
| 389 | MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x140 |
| 390 | MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x140 |
| 391 | MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x140 |
| 392 | >; |
| 393 | }; |
| 394 | |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 395 | pinctrl_usdhc2_gpio: usdhc2gpiogrp { |
| 396 | fsl,pins = < |
| 397 | MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4 |
| 398 | >; |
| 399 | }; |
| 400 | |
| 401 | pinctrl_usdhc2: usdhc2grp { |
| 402 | fsl,pins = < |
| 403 | MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 |
| 404 | MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 |
| 405 | MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 |
| 406 | MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 |
| 407 | MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 |
| 408 | MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 |
| 409 | MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 |
| 410 | >; |
| 411 | }; |
| 412 | |
| 413 | pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { |
| 414 | fsl,pins = < |
| 415 | MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 |
| 416 | MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 |
| 417 | MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 |
| 418 | MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 |
| 419 | MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 |
| 420 | MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 |
| 421 | MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 |
| 422 | >; |
| 423 | }; |
| 424 | |
| 425 | pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { |
| 426 | fsl,pins = < |
| 427 | MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 |
| 428 | MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 |
| 429 | MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 |
| 430 | MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 |
| 431 | MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 |
| 432 | MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 |
| 433 | MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 |
| 434 | >; |
| 435 | }; |
| 436 | |
| 437 | pinctrl_usdhc3: usdhc3grp { |
| 438 | fsl,pins = < |
| 439 | MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000190 |
| 440 | MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 |
| 441 | MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 |
| 442 | MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 |
| 443 | MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 |
| 444 | MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 |
| 445 | MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 |
| 446 | MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 |
| 447 | MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 |
| 448 | MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 |
| 449 | MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 |
| 450 | >; |
| 451 | }; |
| 452 | |
| 453 | pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { |
| 454 | fsl,pins = < |
| 455 | MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000194 |
| 456 | MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 |
| 457 | MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 |
| 458 | MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 |
| 459 | MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 |
| 460 | MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 |
| 461 | MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 |
| 462 | MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 |
| 463 | MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 |
| 464 | MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 |
| 465 | MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 |
| 466 | >; |
| 467 | }; |
| 468 | |
| 469 | pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { |
| 470 | fsl,pins = < |
| 471 | MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000196 |
| 472 | MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 |
| 473 | MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 |
| 474 | MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 |
| 475 | MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 |
| 476 | MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 |
| 477 | MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 |
| 478 | MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 |
| 479 | MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 |
| 480 | MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 |
| 481 | MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 |
| 482 | >; |
| 483 | }; |
| 484 | |
| 485 | pinctrl_wdog: wdoggrp { |
| 486 | fsl,pins = < |
| 487 | MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166 |
| 488 | >; |
| 489 | }; |
| 490 | }; |