blob: 9e0ca716f72bc101a00aeffc30a7c472f405f8c4 [file] [log] [blame]
Stefan Roese65da15e2018-09-05 15:12:35 +02001// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright (C) 2018 Stefan Roese <sr@denx.de>
4 */
5
6#include <common.h>
7#include <dm.h>
8#include <ram.h>
Stefan Roese81382b72018-10-09 08:59:10 +02009#include <wdt.h>
Stefan Roese65da15e2018-09-05 15:12:35 +020010#include <asm/io.h>
11#include <linux/io.h>
12#include <linux/sizes.h>
13#include "mt76xx.h"
14
15#define STR_LEN 6
16
17#ifdef CONFIG_BOOT_ROM
18int mach_cpu_init(void)
19{
20 ddr_calibrate();
21
22 return 0;
23}
24#endif
25
26int dram_init(void)
27{
28 gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, SZ_256M);
29
30 return 0;
31}
32
33int print_cpuinfo(void)
34{
35 static const char * const boot_str[] = { "PLL (3-Byte SPI Addr)",
36 "PLL (4-Byte SPI Addr)",
37 "XTAL (3-Byte SPI Addr)",
38 "XTAL (4-Byte SPI Addr)" };
39 const void *blob = gd->fdt_blob;
40 void __iomem *sysc_base;
41 char buf[STR_LEN + 1];
42 fdt_addr_t base;
43 fdt_size_t size;
44 char *str;
45 int node;
46 u32 val;
47
48 /* Get system controller base address */
49 node = fdt_node_offset_by_compatible(blob, -1, "ralink,mt7620a-sysc");
50 if (node < 0)
51 return -FDT_ERR_NOTFOUND;
52
53 base = fdtdec_get_addr_size_auto_noparent(blob, node, "reg",
54 0, &size, true);
55 if (base == FDT_ADDR_T_NONE)
56 return -EINVAL;
57
58 sysc_base = ioremap_nocache(base, size);
59
60 str = (char *)sysc_base + MT76XX_CHIPID_OFFS;
61 snprintf(buf, STR_LEN + 1, "%s", str);
62 val = readl(sysc_base + MT76XX_CHIP_REV_ID_OFFS);
63 printf("CPU: %-*s Rev %ld.%ld - ", STR_LEN, buf,
64 (val & GENMASK(11, 8)) >> 8, val & GENMASK(3, 0));
65
66 val = (readl(sysc_base + MT76XX_SYSCFG0_OFFS) & GENMASK(3, 1)) >> 1;
67 printf("Boot from %s\n", boot_str[val]);
68
69 return 0;
70}
Stefan Roese81382b72018-10-09 08:59:10 +020071
72#ifdef CONFIG_WATCHDOG
73static struct udevice *watchdog_dev;
74
75/* Called by macro WATCHDOG_RESET */
76void watchdog_reset(void)
77{
78 static ulong next_reset;
79 ulong now;
80
81 if (!watchdog_dev)
82 return;
83
84 now = get_timer(0);
85
86 /* Do not reset the watchdog too often */
87 if (now > next_reset) {
88 next_reset = now + 1000; /* reset every 1000ms */
89 wdt_reset(watchdog_dev);
90 }
91}
Stefan Roese0d5186a2018-12-18 10:27:14 +010092#endif
Stefan Roese81382b72018-10-09 08:59:10 +020093
94int arch_misc_init(void)
95{
Stefan Roese0d5186a2018-12-18 10:27:14 +010096 /*
97 * It has been noticed, that sometimes the d-cache is not in a
98 * "clean-state" when U-Boot is running on MT7688. This was
99 * detected when using the ethernet driver (which uses d-cache)
100 * and a TFTP command does not complete. Flushing the complete
101 * d-cache (again?) here seems to fix this issue.
102 */
103 flush_dcache_range(gd->bd->bi_memstart,
104 gd->bd->bi_memstart + gd->ram_size - 1);
105
106#ifdef CONFIG_WATCHDOG
Stefan Roese81382b72018-10-09 08:59:10 +0200107 /* Init watchdog */
108 if (uclass_get_device_by_seq(UCLASS_WDT, 0, &watchdog_dev)) {
109 debug("Watchdog: Not found by seq!\n");
110 if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) {
111 puts("Watchdog: Not found!\n");
112 return 0;
113 }
114 }
115
116 wdt_start(watchdog_dev, 60000, 0); /* 60 seconds */
117 printf("Watchdog: Started\n");
Stefan Roese0d5186a2018-12-18 10:27:14 +0100118#endif
Stefan Roese81382b72018-10-09 08:59:10 +0200119
120 return 0;
121}