| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2018 Stefan Roese <sr@denx.de> |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <ram.h> |
| #include <wdt.h> |
| #include <asm/io.h> |
| #include <linux/io.h> |
| #include <linux/sizes.h> |
| #include "mt76xx.h" |
| |
| #define STR_LEN 6 |
| |
| #ifdef CONFIG_BOOT_ROM |
| int mach_cpu_init(void) |
| { |
| ddr_calibrate(); |
| |
| return 0; |
| } |
| #endif |
| |
| int dram_init(void) |
| { |
| gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, SZ_256M); |
| |
| return 0; |
| } |
| |
| int print_cpuinfo(void) |
| { |
| static const char * const boot_str[] = { "PLL (3-Byte SPI Addr)", |
| "PLL (4-Byte SPI Addr)", |
| "XTAL (3-Byte SPI Addr)", |
| "XTAL (4-Byte SPI Addr)" }; |
| const void *blob = gd->fdt_blob; |
| void __iomem *sysc_base; |
| char buf[STR_LEN + 1]; |
| fdt_addr_t base; |
| fdt_size_t size; |
| char *str; |
| int node; |
| u32 val; |
| |
| /* Get system controller base address */ |
| node = fdt_node_offset_by_compatible(blob, -1, "ralink,mt7620a-sysc"); |
| if (node < 0) |
| return -FDT_ERR_NOTFOUND; |
| |
| base = fdtdec_get_addr_size_auto_noparent(blob, node, "reg", |
| 0, &size, true); |
| if (base == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| sysc_base = ioremap_nocache(base, size); |
| |
| str = (char *)sysc_base + MT76XX_CHIPID_OFFS; |
| snprintf(buf, STR_LEN + 1, "%s", str); |
| val = readl(sysc_base + MT76XX_CHIP_REV_ID_OFFS); |
| printf("CPU: %-*s Rev %ld.%ld - ", STR_LEN, buf, |
| (val & GENMASK(11, 8)) >> 8, val & GENMASK(3, 0)); |
| |
| val = (readl(sysc_base + MT76XX_SYSCFG0_OFFS) & GENMASK(3, 1)) >> 1; |
| printf("Boot from %s\n", boot_str[val]); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_WATCHDOG |
| static struct udevice *watchdog_dev; |
| |
| /* Called by macro WATCHDOG_RESET */ |
| void watchdog_reset(void) |
| { |
| static ulong next_reset; |
| ulong now; |
| |
| if (!watchdog_dev) |
| return; |
| |
| now = get_timer(0); |
| |
| /* Do not reset the watchdog too often */ |
| if (now > next_reset) { |
| next_reset = now + 1000; /* reset every 1000ms */ |
| wdt_reset(watchdog_dev); |
| } |
| } |
| #endif |
| |
| int arch_misc_init(void) |
| { |
| /* |
| * It has been noticed, that sometimes the d-cache is not in a |
| * "clean-state" when U-Boot is running on MT7688. This was |
| * detected when using the ethernet driver (which uses d-cache) |
| * and a TFTP command does not complete. Flushing the complete |
| * d-cache (again?) here seems to fix this issue. |
| */ |
| flush_dcache_range(gd->bd->bi_memstart, |
| gd->bd->bi_memstart + gd->ram_size - 1); |
| |
| #ifdef CONFIG_WATCHDOG |
| /* Init watchdog */ |
| if (uclass_get_device_by_seq(UCLASS_WDT, 0, &watchdog_dev)) { |
| debug("Watchdog: Not found by seq!\n"); |
| if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) { |
| puts("Watchdog: Not found!\n"); |
| return 0; |
| } |
| } |
| |
| wdt_start(watchdog_dev, 60000, 0); /* 60 seconds */ |
| printf("Watchdog: Started\n"); |
| #endif |
| |
| return 0; |
| } |