blob: a1c55a83069e4e23df02916d42275fe66858ebfa [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Michal Simek04b7e622015-01-15 10:01:51 +01002/*
3 * Configuration for Xilinx ZynqMP
4 * (C) Copyright 2014 - 2015 Xilinx, Inc.
5 * Michal Simek <michal.simek@xilinx.com>
6 *
7 * Based on Configuration for Versatile Express
Michal Simek04b7e622015-01-15 10:01:51 +01008 */
9
10#ifndef __XILINX_ZYNQMP_H
11#define __XILINX_ZYNQMP_H
12
13#define CONFIG_REMAKE_ELF
14
15/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
16
Michal Simek04b7e622015-01-15 10:01:51 +010017/* Generic Interrupt Controller Definitions */
18#define CONFIG_GICV2
19#define GICD_BASE 0xF9010000
20#define GICC_BASE 0xF9020000
21
Vipul Kumarf4009d82018-02-15 11:24:41 +053022#ifndef CONFIG_SYS_MEMTEST_SCRATCH
23# define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
24#endif
Michal Simekbae19002015-10-15 14:34:28 +020025
Michal Simek8faa66a2016-02-08 09:34:53 +010026#define CONFIG_SYS_MEMTEST_START 0
27#define CONFIG_SYS_MEMTEST_END 1000
Michal Simek04b7e622015-01-15 10:01:51 +010028
Soren Brinkmanne911cd02016-07-27 14:12:03 -070029#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
Michal Simek04b7e622015-01-15 10:01:51 +010030
Michal Simek04b7e622015-01-15 10:01:51 +010031/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
Michal Simekd48a1702015-11-05 08:32:14 +010032#if !defined(COUNTER_FREQUENCY)
33# define COUNTER_FREQUENCY 100000000
34#endif
Michal Simek04b7e622015-01-15 10:01:51 +010035
36/* Size of malloc() pool */
Siva Durga Prasad Paladuguba1f68e2015-08-04 13:03:26 +053037#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x2000000)
Michal Simek04b7e622015-01-15 10:01:51 +010038
39/* Serial setup */
Michal Simekd5c13f72016-02-23 10:02:29 +010040#define CONFIG_ARM_DCC
41#define CONFIG_CPU_ARMV8
Michal Simek04b7e622015-01-15 10:01:51 +010042
Michal Simek04b7e622015-01-15 10:01:51 +010043#define CONFIG_SYS_BAUDRATE_TABLE \
44 { 4800, 9600, 19200, 38400, 57600, 115200 }
45
Michal Simekc68918e2015-07-23 12:03:55 +020046/* BOOTP options */
47#define CONFIG_BOOTP_BOOTFILESIZE
Michal Simekc68918e2015-07-23 12:03:55 +020048#define CONFIG_BOOTP_MAY_FAIL
Michal Simek00615562016-04-22 14:28:17 +020049
Siva Durga Prasad Paladugu937ad762015-11-17 14:30:09 +053050#ifdef CONFIG_NAND_ARASAN
Siva Durga Prasad Paladugu937ad762015-11-17 14:30:09 +053051# define CONFIG_SYS_MAX_NAND_DEVICE 1
Siva Durga Prasad Paladugu937ad762015-11-17 14:30:09 +053052# define CONFIG_SYS_NAND_ONFI_DETECTION
Siva Durga Prasad Paladugu937ad762015-11-17 14:30:09 +053053#endif
54
Michal Simek1a1ab5a2018-01-15 12:52:59 +010055#if defined(CONFIG_SPL_BUILD)
56#define CONFIG_ZYNQMP_PSU_INIT_ENABLED
57#endif
58
Michal Simek04b7e622015-01-15 10:01:51 +010059/* Miscellaneous configurable options */
60#define CONFIG_SYS_LOAD_ADDR 0x8000000
61
Siva Durga Prasad Paladuguba1f68e2015-08-04 13:03:26 +053062#if defined(CONFIG_ZYNQMP_USB)
Siva Durga Prasad Paladuguba1f68e2015-08-04 13:03:26 +053063#define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000
64#define DFU_DEFAULT_POLL_TIMEOUT 300
Siva Durga Prasad Paladuguba1f68e2015-08-04 13:03:26 +053065#define CONFIG_THOR_RESET_OFF
66#define DFU_ALT_INFO_RAM \
67 "dfu_ram_info=" \
Siva Durga Prasad Paladuguc2d11502015-09-11 11:57:25 +053068 "setenv dfu_alt_info " \
Siva Durga Prasad Paladugue69d0fe2015-09-07 11:03:47 +053069 "Image ram $kernel_addr $kernel_size\\\\;" \
70 "system.dtb ram $fdt_addr $fdt_size\0" \
Siva Durga Prasad Paladuguba1f68e2015-08-04 13:03:26 +053071 "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
72 "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
73
74#define DFU_ALT_INFO \
75 DFU_ALT_INFO_RAM
Siva Durga Prasad Paladugu82e7fb22016-05-12 10:54:41 +053076
77#ifndef CONFIG_SPL_BUILD
Siva Durga Prasad Paladugu82e7fb22016-05-12 10:54:41 +053078# define PARTS_DEFAULT \
79 "partitions=uuid_disk=${uuid_gpt_disk};" \
80 "name=""boot"",size=16M,uuid=${uuid_gpt_boot};" \
81 "name=""Linux"",size=-M,uuid=${uuid_gpt_Linux}\0"
82#endif
Siva Durga Prasad Paladuguba1f68e2015-08-04 13:03:26 +053083#endif
84
85#if !defined(DFU_ALT_INFO)
86# define DFU_ALT_INFO
87#endif
88
Siva Durga Prasad Paladugu82e7fb22016-05-12 10:54:41 +053089#if !defined(PARTS_DEFAULT)
90# define PARTS_DEFAULT
91#endif
92
Michal Simek04b7e622015-01-15 10:01:51 +010093/* Monitor Command Prompt */
94/* Console I/O Buffer Size */
95#define CONFIG_SYS_CBSIZE 2048
Michal Simek04b7e622015-01-15 10:01:51 +010096#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
Michal Simek14b26182017-02-06 14:34:01 +010097#define CONFIG_PANIC_HANG
Michal Simek04b7e622015-01-15 10:01:51 +010098#define CONFIG_SYS_MAXARGS 64
99
Michal Simekc68918e2015-07-23 12:03:55 +0200100/* Ethernet driver */
Michal Simek3d7285f2015-11-30 14:34:52 +0100101#if defined(CONFIG_ZYNQ_GEM)
Michal Simekc68918e2015-07-23 12:03:55 +0200102# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
Siva Durga Prasad Paladugu73551042016-01-05 15:21:46 +0530103# define PHY_ANEG_TIMEOUT 20000
Michal Simekc68918e2015-07-23 12:03:55 +0200104#endif
105
Michal Simek04b7e622015-01-15 10:01:51 +0100106#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
107
Michal Simek04b7e622015-01-15 10:01:51 +0100108#define CONFIG_CLOCKS
109
Michal Simekecfb6dc2016-04-22 14:28:54 +0200110#define ENV_MEM_LAYOUT_SETTINGS \
111 "fdt_high=10000000\0" \
112 "initrd_high=10000000\0" \
113 "fdt_addr_r=0x40000000\0" \
114 "pxefile_addr_r=0x10000000\0" \
115 "kernel_addr_r=0x18000000\0" \
116 "scriptaddr=0x02000000\0" \
117 "ramdisk_addr_r=0x02100000\0" \
Siva Durga Prasad Paladugub541a3e2019-01-24 11:32:04 +0530118 "script_offset_f=0x3e80000\0" \
119 "script_size_f=0x80000\0" \
Michal Simekecfb6dc2016-04-22 14:28:54 +0200120
Masahiro Yamada168c57d2017-01-30 19:46:51 +0900121#if defined(CONFIG_MMC_SDHCI_ZYNQ)
Michal Simekecfb6dc2016-04-22 14:28:54 +0200122# define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
123#else
124# define BOOT_TARGET_DEVICES_MMC(func)
125#endif
126
127#if defined(CONFIG_SATA_CEVA)
128# define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
129#else
130# define BOOT_TARGET_DEVICES_SCSI(func)
131#endif
132
133#if defined(CONFIG_ZYNQMP_USB)
134# define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) func(USB, usb, 1)
135#else
136# define BOOT_TARGET_DEVICES_USB(func)
137#endif
138
Joe Hershberger8e8594f2018-04-13 15:26:40 -0500139#if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP)
Michal Simek5d232272018-03-28 15:20:48 +0200140# define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
141#else
142# define BOOT_TARGET_DEVICES_PXE(func)
143#endif
144
145#if defined(CONFIG_CMD_DHCP)
146# define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
147#else
148# define BOOT_TARGET_DEVICES_DHCP(func)
149#endif
150
Siva Durga Prasad Paladugub541a3e2019-01-24 11:32:04 +0530151#if defined(CONFIG_ZYNQMP_GQSPI)
152# define BOOT_TARGET_DEVICES_QSPI(func) func(QSPI, qspi, 0)
153#else
154# define BOOT_TARGET_DEVICES_QSPI(func)
155#endif
156
157#if defined(CONFIG_NAND_ARASAN)
158# define BOOT_TARGET_DEVICES_NAND(func) func(NAND, nand, 0)
159#else
160# define BOOT_TARGET_DEVICES_NAND(func)
161#endif
162
163#define BOOTENV_DEV_QSPI(devtypeu, devtypel, instance) \
164 "bootcmd_" #devtypel #instance "=sf probe " #instance " 0 0 && " \
165 "sf read $scriptaddr $script_offset_f $script_size_f && " \
166 "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0"
167
168#define BOOTENV_DEV_NAME_QSPI(devtypeu, devtypel, instance) \
169 #devtypel #instance " "
170
171#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
172 "bootcmd_" #devtypel #instance "= nand info && " \
173 "nand read $scriptaddr $script_offset_f $script_size_f && " \
174 "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0"
175
176#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
177 #devtypel #instance " "
178
Michal Simekecfb6dc2016-04-22 14:28:54 +0200179#define BOOT_TARGET_DEVICES(func) \
180 BOOT_TARGET_DEVICES_MMC(func) \
Siva Durga Prasad Paladugub541a3e2019-01-24 11:32:04 +0530181 BOOT_TARGET_DEVICES_QSPI(func) \
182 BOOT_TARGET_DEVICES_NAND(func) \
Michal Simekecfb6dc2016-04-22 14:28:54 +0200183 BOOT_TARGET_DEVICES_USB(func) \
184 BOOT_TARGET_DEVICES_SCSI(func) \
Michal Simek5d232272018-03-28 15:20:48 +0200185 BOOT_TARGET_DEVICES_PXE(func) \
186 BOOT_TARGET_DEVICES_DHCP(func)
Michal Simekecfb6dc2016-04-22 14:28:54 +0200187
188#include <config_distro_bootcmd.h>
189
190/* Initial environment variables */
191#ifndef CONFIG_EXTRA_ENV_SETTINGS
192#define CONFIG_EXTRA_ENV_SETTINGS \
193 ENV_MEM_LAYOUT_SETTINGS \
194 BOOTENV \
195 DFU_ALT_INFO
196#endif
197
Michal Simek12398ea2016-08-19 14:14:52 +0200198/* SPL can't handle all huge variables - define just DFU */
Andrew F. Davis6d932e62019-01-17 13:43:02 -0600199#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
Michal Simek12398ea2016-08-19 14:14:52 +0200200#undef CONFIG_EXTRA_ENV_SETTINGS
201# define CONFIG_EXTRA_ENV_SETTINGS \
202 "dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \
203 "atf-uboot.ub ram 0x10000000 0x1000000;" \
204 "Image ram 0x80000 0x3f80000;" \
205 "system.dtb ram 0x4000000 0x100000\0" \
206 "dfu_bufsiz=0x1000\0"
207#endif
208
Soren Brinkmanne911cd02016-07-27 14:12:03 -0700209#define CONFIG_SPL_STACK 0xfffffffc
Michal Simek12398ea2016-08-19 14:14:52 +0200210#define CONFIG_SPL_MAX_SIZE 0x40000
Michal Simek72536fd2015-11-20 13:17:22 +0100211
212/* Just random location in OCM */
Michal Simek89e1f762016-08-30 14:58:46 +0200213#define CONFIG_SPL_BSS_START_ADDR 0x0
214#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
Michal Simek72536fd2015-11-20 13:17:22 +0100215
Michal Simek933b6f72017-01-16 12:07:33 +0100216#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT)
Michal Simek933b6f72017-01-16 12:07:33 +0100217# define CONFIG_SYS_SPI_KERNEL_OFFS 0x80000
218# define CONFIG_SYS_SPI_ARGS_OFFS 0xa0000
219# define CONFIG_SYS_SPI_ARGS_SIZE 0xa0000
Hannes Schmelzer30d69e22019-08-22 15:41:43 +0200220#endif
Michal Simek933b6f72017-01-16 12:07:33 +0100221
Michal Simek72536fd2015-11-20 13:17:22 +0100222/* u-boot is like dtb */
223#define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin"
224#define CONFIG_SYS_SPL_ARGS_ADDR 0x8000000
225
226/* ATF is my kernel image */
Michal Simekf5140be2016-09-21 11:42:58 +0200227#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "atf-uboot.ub"
Michal Simek72536fd2015-11-20 13:17:22 +0100228
229/* FIT load address for RAM boot */
230#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x10000000
231
232/* MMC support */
Masahiro Yamada168c57d2017-01-30 19:46:51 +0900233#ifdef CONFIG_MMC_SDHCI_ZYNQ
Michal Simek72536fd2015-11-20 13:17:22 +0100234# define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
235# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* unused */
236# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* unused */
237# define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0 /* unused */
Michal Simek72536fd2015-11-20 13:17:22 +0100238# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
239#endif
240
Andrew F. Davis6d932e62019-01-17 13:43:02 -0600241#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
Michal Simek12398ea2016-08-19 14:14:52 +0200242# undef CONFIG_CMD_BOOTD
243# define CONFIG_SPL_ENV_SUPPORT
244# define CONFIG_SPL_HASH_SUPPORT
245# define CONFIG_ENV_MAX_ENTRIES 10
Michal Simek77316dd2017-12-01 14:34:03 +0100246#endif
Michal Simek12398ea2016-08-19 14:14:52 +0200247
Michal Simek77316dd2017-12-01 14:34:03 +0100248#define CONFIG_SYS_SPL_MALLOC_START 0x20000000
249#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
Michal Simek12398ea2016-08-19 14:14:52 +0200250
251#ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
252# error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
253#endif
Michal Simek12398ea2016-08-19 14:14:52 +0200254
Michal Simek8b353302017-02-07 14:32:26 +0100255#define CONFIG_BOARD_EARLY_INIT_F
256
Michal Simek04b7e622015-01-15 10:01:51 +0100257#endif /* __XILINX_ZYNQMP_H */