| /* |
| * Copyright (C) 2017, STMicroelectronics - All Rights Reserved |
| * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <clk-uclass.h> |
| #include <dm.h> |
| #include <stm32_rcc.h> |
| |
| #include <asm/io.h> |
| #include <asm/arch/stm32.h> |
| #include <asm/arch/stm32_pwr.h> |
| |
| #include <dt-bindings/mfd/stm32f7-rcc.h> |
| |
| #define RCC_CR_HSION BIT(0) |
| #define RCC_CR_HSEON BIT(16) |
| #define RCC_CR_HSERDY BIT(17) |
| #define RCC_CR_HSEBYP BIT(18) |
| #define RCC_CR_CSSON BIT(19) |
| #define RCC_CR_PLLON BIT(24) |
| #define RCC_CR_PLLRDY BIT(25) |
| #define RCC_CR_PLLSAION BIT(28) |
| #define RCC_CR_PLLSAIRDY BIT(29) |
| |
| #define RCC_PLLCFGR_PLLM_MASK GENMASK(5, 0) |
| #define RCC_PLLCFGR_PLLN_MASK GENMASK(14, 6) |
| #define RCC_PLLCFGR_PLLP_MASK GENMASK(17, 16) |
| #define RCC_PLLCFGR_PLLQ_MASK GENMASK(27, 24) |
| #define RCC_PLLCFGR_PLLSRC BIT(22) |
| #define RCC_PLLCFGR_PLLM_SHIFT 0 |
| #define RCC_PLLCFGR_PLLN_SHIFT 6 |
| #define RCC_PLLCFGR_PLLP_SHIFT 16 |
| #define RCC_PLLCFGR_PLLQ_SHIFT 24 |
| |
| #define RCC_CFGR_AHB_PSC_MASK GENMASK(7, 4) |
| #define RCC_CFGR_APB1_PSC_MASK GENMASK(12, 10) |
| #define RCC_CFGR_APB2_PSC_MASK GENMASK(15, 13) |
| #define RCC_CFGR_SW0 BIT(0) |
| #define RCC_CFGR_SW1 BIT(1) |
| #define RCC_CFGR_SW_MASK GENMASK(1, 0) |
| #define RCC_CFGR_SW_HSI 0 |
| #define RCC_CFGR_SW_HSE RCC_CFGR_SW0 |
| #define RCC_CFGR_SW_PLL RCC_CFGR_SW1 |
| #define RCC_CFGR_SWS0 BIT(2) |
| #define RCC_CFGR_SWS1 BIT(3) |
| #define RCC_CFGR_SWS_MASK GENMASK(3, 2) |
| #define RCC_CFGR_SWS_HSI 0 |
| #define RCC_CFGR_SWS_HSE RCC_CFGR_SWS0 |
| #define RCC_CFGR_SWS_PLL RCC_CFGR_SWS1 |
| #define RCC_CFGR_HPRE_SHIFT 4 |
| #define RCC_CFGR_PPRE1_SHIFT 10 |
| #define RCC_CFGR_PPRE2_SHIFT 13 |
| |
| #define RCC_PLLSAICFGR_PLLSAIN_MASK GENMASK(14, 6) |
| #define RCC_PLLSAICFGR_PLLSAIP_MASK GENMASK(17, 16) |
| #define RCC_PLLSAICFGR_PLLSAIQ_MASK GENMASK(27, 24) |
| #define RCC_PLLSAICFGR_PLLSAIR_MASK GENMASK(30, 28) |
| #define RCC_PLLSAICFGR_PLLSAIN_SHIFT 6 |
| #define RCC_PLLSAICFGR_PLLSAIP_SHIFT 16 |
| #define RCC_PLLSAICFGR_PLLSAIQ_SHIFT 24 |
| #define RCC_PLLSAICFGR_PLLSAIR_SHIFT 28 |
| #define RCC_PLLSAICFGR_PLLSAIP_4 BIT(16) |
| #define RCC_PLLSAICFGR_PLLSAIQ_4 BIT(26) |
| #define RCC_PLLSAICFGR_PLLSAIR_3 BIT(29) | BIT(28) |
| |
| #define RCC_DCKCFGRX_TIMPRE BIT(24) |
| #define RCC_DCKCFGRX_CK48MSEL BIT(27) |
| #define RCC_DCKCFGRX_SDMMC1SEL BIT(28) |
| #define RCC_DCKCFGR2_SDMMC2SEL BIT(29) |
| |
| #define RCC_DCKCFGR_PLLSAIDIVR_SHIFT 16 |
| #define RCC_DCKCFGR_PLLSAIDIVR_MASK GENMASK(17, 16) |
| #define RCC_DCKCFGR_PLLSAIDIVR_2 0 |
| |
| /* |
| * RCC AHB1ENR specific definitions |
| */ |
| #define RCC_AHB1ENR_ETHMAC_EN BIT(25) |
| #define RCC_AHB1ENR_ETHMAC_TX_EN BIT(26) |
| #define RCC_AHB1ENR_ETHMAC_RX_EN BIT(27) |
| |
| /* |
| * RCC APB1ENR specific definitions |
| */ |
| #define RCC_APB1ENR_TIM2EN BIT(0) |
| #define RCC_APB1ENR_PWREN BIT(28) |
| |
| /* |
| * RCC APB2ENR specific definitions |
| */ |
| #define RCC_APB2ENR_SYSCFGEN BIT(14) |
| #define RCC_APB2ENR_SAI1EN BIT(22) |
| |
| enum pllsai_div { |
| PLLSAIP, |
| PLLSAIQ, |
| PLLSAIR, |
| }; |
| |
| static const struct stm32_clk_info stm32f4_clk_info = { |
| /* 180 MHz */ |
| .sys_pll_psc = { |
| .pll_n = 360, |
| .pll_p = 2, |
| .pll_q = 8, |
| .ahb_psc = AHB_PSC_1, |
| .apb1_psc = APB_PSC_4, |
| .apb2_psc = APB_PSC_2, |
| }, |
| .has_overdrive = false, |
| .v2 = false, |
| }; |
| |
| static const struct stm32_clk_info stm32f7_clk_info = { |
| /* 200 MHz */ |
| .sys_pll_psc = { |
| .pll_n = 400, |
| .pll_p = 2, |
| .pll_q = 8, |
| .ahb_psc = AHB_PSC_1, |
| .apb1_psc = APB_PSC_4, |
| .apb2_psc = APB_PSC_2, |
| }, |
| .has_overdrive = true, |
| .v2 = true, |
| }; |
| |
| struct stm32_clk { |
| struct stm32_rcc_regs *base; |
| struct stm32_pwr_regs *pwr_regs; |
| struct stm32_clk_info info; |
| unsigned long hse_rate; |
| }; |
| |
| static const u8 pllsaidivr_table[] = { 2, 4, 8, 16 }; |
| |
| static int configure_clocks(struct udevice *dev) |
| { |
| struct stm32_clk *priv = dev_get_priv(dev); |
| struct stm32_rcc_regs *regs = priv->base; |
| struct stm32_pwr_regs *pwr = priv->pwr_regs; |
| struct pll_psc *sys_pll_psc = &priv->info.sys_pll_psc; |
| |
| /* Reset RCC configuration */ |
| setbits_le32(®s->cr, RCC_CR_HSION); |
| writel(0, ®s->cfgr); /* Reset CFGR */ |
| clrbits_le32(®s->cr, (RCC_CR_HSEON | RCC_CR_CSSON |
| | RCC_CR_PLLON | RCC_CR_PLLSAION)); |
| writel(0x24003010, ®s->pllcfgr); /* Reset value from RM */ |
| clrbits_le32(®s->cr, RCC_CR_HSEBYP); |
| writel(0, ®s->cir); /* Disable all interrupts */ |
| |
| /* Configure for HSE+PLL operation */ |
| setbits_le32(®s->cr, RCC_CR_HSEON); |
| while (!(readl(®s->cr) & RCC_CR_HSERDY)) |
| ; |
| |
| setbits_le32(®s->cfgr, (( |
| sys_pll_psc->ahb_psc << RCC_CFGR_HPRE_SHIFT) |
| | (sys_pll_psc->apb1_psc << RCC_CFGR_PPRE1_SHIFT) |
| | (sys_pll_psc->apb2_psc << RCC_CFGR_PPRE2_SHIFT))); |
| |
| /* Configure the main PLL */ |
| setbits_le32(®s->pllcfgr, RCC_PLLCFGR_PLLSRC); /* pll source HSE */ |
| clrsetbits_le32(®s->pllcfgr, RCC_PLLCFGR_PLLM_MASK, |
| sys_pll_psc->pll_m << RCC_PLLCFGR_PLLM_SHIFT); |
| clrsetbits_le32(®s->pllcfgr, RCC_PLLCFGR_PLLN_MASK, |
| sys_pll_psc->pll_n << RCC_PLLCFGR_PLLN_SHIFT); |
| clrsetbits_le32(®s->pllcfgr, RCC_PLLCFGR_PLLP_MASK, |
| ((sys_pll_psc->pll_p >> 1) - 1) << RCC_PLLCFGR_PLLP_SHIFT); |
| clrsetbits_le32(®s->pllcfgr, RCC_PLLCFGR_PLLQ_MASK, |
| sys_pll_psc->pll_q << RCC_PLLCFGR_PLLQ_SHIFT); |
| |
| /* configure SDMMC clock */ |
| if (priv->info.v2) { /*stm32f7 case */ |
| /* select PLLQ as 48MHz clock source */ |
| clrbits_le32(®s->dckcfgr2, RCC_DCKCFGRX_CK48MSEL); |
| |
| /* select 48MHz as SDMMC1 clock source */ |
| clrbits_le32(®s->dckcfgr2, RCC_DCKCFGRX_SDMMC1SEL); |
| |
| /* select 48MHz as SDMMC2 clock source */ |
| clrbits_le32(®s->dckcfgr2, RCC_DCKCFGR2_SDMMC2SEL); |
| } else { /* stm32f4 case */ |
| /* select PLLQ as 48MHz clock source */ |
| clrbits_le32(®s->dckcfgr, RCC_DCKCFGRX_CK48MSEL); |
| |
| /* select 48MHz as SDMMC1 clock source */ |
| clrbits_le32(®s->dckcfgr, RCC_DCKCFGRX_SDMMC1SEL); |
| } |
| |
| #ifdef CONFIG_VIDEO_STM32 |
| /* |
| * Configure the SAI PLL to generate LTDC pixel clock |
| */ |
| clrsetbits_le32(®s->pllsaicfgr, RCC_PLLSAICFGR_PLLSAIR_MASK, |
| RCC_PLLSAICFGR_PLLSAIR_3); |
| clrsetbits_le32(®s->pllsaicfgr, RCC_PLLSAICFGR_PLLSAIN_MASK, |
| 195 << RCC_PLLSAICFGR_PLLSAIN_SHIFT); |
| |
| clrsetbits_le32(®s->dckcfgr, RCC_DCKCFGR_PLLSAIDIVR_MASK, |
| RCC_DCKCFGR_PLLSAIDIVR_2 << RCC_DCKCFGR_PLLSAIDIVR_SHIFT); |
| #endif |
| /* Enable the main PLL */ |
| setbits_le32(®s->cr, RCC_CR_PLLON); |
| while (!(readl(®s->cr) & RCC_CR_PLLRDY)) |
| ; |
| |
| #ifdef CONFIG_VIDEO_STM32 |
| /* Enable the SAI PLL */ |
| setbits_le32(®s->cr, RCC_CR_PLLSAION); |
| while (!(readl(®s->cr) & RCC_CR_PLLSAIRDY)) |
| ; |
| #endif |
| setbits_le32(®s->apb1enr, RCC_APB1ENR_PWREN); |
| |
| if (priv->info.has_overdrive) { |
| /* |
| * Enable high performance mode |
| * System frequency up to 200 MHz |
| */ |
| setbits_le32(&pwr->cr1, PWR_CR1_ODEN); |
| /* Infinite wait! */ |
| while (!(readl(&pwr->csr1) & PWR_CSR1_ODRDY)) |
| ; |
| /* Enable the Over-drive switch */ |
| setbits_le32(&pwr->cr1, PWR_CR1_ODSWEN); |
| /* Infinite wait! */ |
| while (!(readl(&pwr->csr1) & PWR_CSR1_ODSWRDY)) |
| ; |
| } |
| |
| stm32_flash_latency_cfg(5); |
| clrbits_le32(®s->cfgr, (RCC_CFGR_SW0 | RCC_CFGR_SW1)); |
| setbits_le32(®s->cfgr, RCC_CFGR_SW_PLL); |
| |
| while ((readl(®s->cfgr) & RCC_CFGR_SWS_MASK) != |
| RCC_CFGR_SWS_PLL) |
| ; |
| |
| #ifdef CONFIG_ETH_DESIGNWARE |
| /* gate the SYSCFG clock, needed to set RMII ethernet interface */ |
| setbits_le32(®s->apb2enr, RCC_APB2ENR_SYSCFGEN); |
| #endif |
| |
| return 0; |
| } |
| |
| static bool stm32_clk_get_ck48msel(struct stm32_clk *priv) |
| { |
| struct stm32_rcc_regs *regs = priv->base; |
| |
| if (priv->info.v2) /*stm32f7 case */ |
| return readl(®s->dckcfgr2) & RCC_DCKCFGRX_CK48MSEL; |
| else |
| |
| return readl(®s->dckcfgr) & RCC_DCKCFGRX_CK48MSEL; |
| } |
| |
| static unsigned long stm32_clk_get_pllsai_vco_rate(struct stm32_clk *priv) |
| { |
| struct stm32_rcc_regs *regs = priv->base; |
| u16 pllm, pllsain; |
| |
| pllm = (readl(®s->pllcfgr) & RCC_PLLCFGR_PLLM_MASK); |
| pllsain = ((readl(®s->pllsaicfgr) & RCC_PLLSAICFGR_PLLSAIN_MASK) |
| >> RCC_PLLSAICFGR_PLLSAIN_SHIFT); |
| |
| return ((priv->hse_rate / pllm) * pllsain); |
| } |
| |
| static unsigned long stm32_clk_get_pllsai_rate(struct stm32_clk *priv, |
| enum pllsai_div output) |
| { |
| struct stm32_rcc_regs *regs = priv->base; |
| u16 pll_div_output; |
| |
| switch (output) { |
| case PLLSAIP: |
| pll_div_output = ((((readl(®s->pllsaicfgr) |
| & RCC_PLLSAICFGR_PLLSAIP_MASK) |
| >> RCC_PLLSAICFGR_PLLSAIP_SHIFT) + 1) << 1); |
| break; |
| case PLLSAIQ: |
| pll_div_output = (readl(®s->pllsaicfgr) |
| & RCC_PLLSAICFGR_PLLSAIQ_MASK) |
| >> RCC_PLLSAICFGR_PLLSAIQ_SHIFT; |
| break; |
| case PLLSAIR: |
| pll_div_output = (readl(®s->pllsaicfgr) |
| & RCC_PLLSAICFGR_PLLSAIR_MASK) |
| >> RCC_PLLSAICFGR_PLLSAIR_SHIFT; |
| break; |
| default: |
| pr_err("incorrect PLLSAI output %d\n", output); |
| return -EINVAL; |
| } |
| |
| return (stm32_clk_get_pllsai_vco_rate(priv) / pll_div_output); |
| } |
| |
| static bool stm32_get_timpre(struct stm32_clk *priv) |
| { |
| struct stm32_rcc_regs *regs = priv->base; |
| u32 val; |
| |
| if (priv->info.v2) /*stm32f7 case */ |
| val = readl(®s->dckcfgr2); |
| else |
| val = readl(®s->dckcfgr); |
| /* get timer prescaler */ |
| return !!(val & RCC_DCKCFGRX_TIMPRE); |
| } |
| |
| static u32 stm32_get_hclk_rate(struct stm32_rcc_regs *regs, u32 sysclk) |
| { |
| u8 shift; |
| /* Prescaler table lookups for clock computation */ |
| u8 ahb_psc_table[16] = { |
| 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9 |
| }; |
| |
| shift = ahb_psc_table[( |
| (readl(®s->cfgr) & RCC_CFGR_AHB_PSC_MASK) |
| >> RCC_CFGR_HPRE_SHIFT)]; |
| |
| return sysclk >> shift; |
| }; |
| |
| static u8 stm32_get_apb_shift(struct stm32_rcc_regs *regs, enum apb apb) |
| { |
| /* Prescaler table lookups for clock computation */ |
| u8 apb_psc_table[8] = { |
| 0, 0, 0, 0, 1, 2, 3, 4 |
| }; |
| |
| if (apb == APB1) |
| return apb_psc_table[( |
| (readl(®s->cfgr) & RCC_CFGR_APB1_PSC_MASK) |
| >> RCC_CFGR_PPRE1_SHIFT)]; |
| else /* APB2 */ |
| return apb_psc_table[( |
| (readl(®s->cfgr) & RCC_CFGR_APB2_PSC_MASK) |
| >> RCC_CFGR_PPRE2_SHIFT)]; |
| }; |
| |
| static u32 stm32_get_timer_rate(struct stm32_clk *priv, u32 sysclk, |
| enum apb apb) |
| { |
| struct stm32_rcc_regs *regs = priv->base; |
| u8 shift = stm32_get_apb_shift(regs, apb); |
| |
| if (stm32_get_timpre(priv)) |
| /* |
| * if APB prescaler is configured to a |
| * division factor of 1, 2 or 4 |
| */ |
| switch (shift) { |
| case 0: |
| case 1: |
| case 2: |
| return stm32_get_hclk_rate(regs, sysclk); |
| default: |
| return (sysclk >> shift) * 4; |
| } |
| else |
| /* |
| * if APB prescaler is configured to a |
| * division factor of 1 |
| */ |
| if (shift == 0) |
| return sysclk; |
| else |
| return (sysclk >> shift) * 2; |
| }; |
| |
| static ulong stm32_clk_get_rate(struct clk *clk) |
| { |
| struct stm32_clk *priv = dev_get_priv(clk->dev); |
| struct stm32_rcc_regs *regs = priv->base; |
| u32 sysclk = 0; |
| u32 vco; |
| u32 sdmmcxsel_bit; |
| u32 saidivr; |
| u32 pllsai_rate; |
| u16 pllm, plln, pllp, pllq; |
| |
| if ((readl(®s->cfgr) & RCC_CFGR_SWS_MASK) == |
| RCC_CFGR_SWS_PLL) { |
| pllm = (readl(®s->pllcfgr) & RCC_PLLCFGR_PLLM_MASK); |
| plln = ((readl(®s->pllcfgr) & RCC_PLLCFGR_PLLN_MASK) |
| >> RCC_PLLCFGR_PLLN_SHIFT); |
| pllp = ((((readl(®s->pllcfgr) & RCC_PLLCFGR_PLLP_MASK) |
| >> RCC_PLLCFGR_PLLP_SHIFT) + 1) << 1); |
| pllq = ((readl(®s->pllcfgr) & RCC_PLLCFGR_PLLQ_MASK) |
| >> RCC_PLLCFGR_PLLQ_SHIFT); |
| vco = (priv->hse_rate / pllm) * plln; |
| sysclk = vco / pllp; |
| } else { |
| return -EINVAL; |
| } |
| |
| switch (clk->id) { |
| /* |
| * AHB CLOCK: 3 x 32 bits consecutive registers are used : |
| * AHB1, AHB2 and AHB3 |
| */ |
| case STM32F7_AHB1_CLOCK(GPIOA) ... STM32F7_AHB3_CLOCK(QSPI): |
| return stm32_get_hclk_rate(regs, sysclk); |
| /* APB1 CLOCK */ |
| case STM32F7_APB1_CLOCK(TIM2) ... STM32F7_APB1_CLOCK(UART8): |
| /* For timer clock, an additionnal prescaler is used*/ |
| switch (clk->id) { |
| case STM32F7_APB1_CLOCK(TIM2): |
| case STM32F7_APB1_CLOCK(TIM3): |
| case STM32F7_APB1_CLOCK(TIM4): |
| case STM32F7_APB1_CLOCK(TIM5): |
| case STM32F7_APB1_CLOCK(TIM6): |
| case STM32F7_APB1_CLOCK(TIM7): |
| case STM32F7_APB1_CLOCK(TIM12): |
| case STM32F7_APB1_CLOCK(TIM13): |
| case STM32F7_APB1_CLOCK(TIM14): |
| return stm32_get_timer_rate(priv, sysclk, APB1); |
| } |
| return (sysclk >> stm32_get_apb_shift(regs, APB1)); |
| |
| /* APB2 CLOCK */ |
| case STM32F7_APB2_CLOCK(TIM1) ... STM32F7_APB2_CLOCK(LTDC): |
| switch (clk->id) { |
| /* |
| * particular case for SDMMC1 and SDMMC2 : |
| * 48Mhz source clock can be from main PLL or from |
| * PLLSAIP |
| */ |
| case STM32F7_APB2_CLOCK(SDMMC1): |
| case STM32F7_APB2_CLOCK(SDMMC2): |
| if (clk->id == STM32F7_APB2_CLOCK(SDMMC1)) |
| sdmmcxsel_bit = RCC_DCKCFGRX_SDMMC1SEL; |
| else |
| sdmmcxsel_bit = RCC_DCKCFGR2_SDMMC2SEL; |
| |
| if (readl(®s->dckcfgr2) & sdmmcxsel_bit) |
| /* System clock is selected as SDMMC1 clock */ |
| return sysclk; |
| /* |
| * 48 MHz can be generated by either PLLSAIP |
| * or by PLLQ depending of CK48MSEL bit of RCC_DCKCFGR |
| */ |
| if (stm32_clk_get_ck48msel(priv)) |
| return stm32_clk_get_pllsai_rate(priv, PLLSAIP); |
| else |
| return (vco / pllq); |
| break; |
| |
| /* For timer clock, an additionnal prescaler is used*/ |
| case STM32F7_APB2_CLOCK(TIM1): |
| case STM32F7_APB2_CLOCK(TIM8): |
| case STM32F7_APB2_CLOCK(TIM9): |
| case STM32F7_APB2_CLOCK(TIM10): |
| case STM32F7_APB2_CLOCK(TIM11): |
| return stm32_get_timer_rate(priv, sysclk, APB2); |
| break; |
| |
| /* particular case for LTDC clock */ |
| case STM32F7_APB2_CLOCK(LTDC): |
| saidivr = readl(®s->dckcfgr); |
| saidivr = (saidivr & RCC_DCKCFGR_PLLSAIDIVR_MASK) |
| >> RCC_DCKCFGR_PLLSAIDIVR_SHIFT; |
| pllsai_rate = stm32_clk_get_pllsai_rate(priv, PLLSAIR); |
| |
| return pllsai_rate / pllsaidivr_table[saidivr]; |
| } |
| return (sysclk >> stm32_get_apb_shift(regs, APB2)); |
| |
| default: |
| pr_err("clock index %ld out of range\n", clk->id); |
| return -EINVAL; |
| } |
| } |
| |
| static ulong stm32_set_rate(struct clk *clk, ulong rate) |
| { |
| return 0; |
| } |
| |
| static int stm32_clk_enable(struct clk *clk) |
| { |
| struct stm32_clk *priv = dev_get_priv(clk->dev); |
| struct stm32_rcc_regs *regs = priv->base; |
| u32 offset = clk->id / 32; |
| u32 bit_index = clk->id % 32; |
| |
| debug("%s: clkid = %ld, offset from AHB1ENR is %d, bit_index = %d\n", |
| __func__, clk->id, offset, bit_index); |
| setbits_le32(®s->ahb1enr + offset, BIT(bit_index)); |
| |
| return 0; |
| } |
| |
| static int stm32_clk_probe(struct udevice *dev) |
| { |
| struct ofnode_phandle_args args; |
| struct udevice *fixed_clock_dev = NULL; |
| struct clk clk; |
| int err; |
| |
| debug("%s\n", __func__); |
| |
| struct stm32_clk *priv = dev_get_priv(dev); |
| fdt_addr_t addr; |
| |
| addr = dev_read_addr(dev); |
| if (addr == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| priv->base = (struct stm32_rcc_regs *)addr; |
| |
| switch (dev_get_driver_data(dev)) { |
| case STM32F4: |
| memcpy(&priv->info, &stm32f4_clk_info, |
| sizeof(struct stm32_clk_info)); |
| break; |
| case STM32F7: |
| memcpy(&priv->info, &stm32f7_clk_info, |
| sizeof(struct stm32_clk_info)); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* retrieve HSE frequency (external oscillator) */ |
| err = uclass_get_device_by_name(UCLASS_CLK, "clk-hse", |
| &fixed_clock_dev); |
| |
| if (err) { |
| pr_err("Can't find fixed clock (%d)", err); |
| return err; |
| } |
| |
| err = clk_request(fixed_clock_dev, &clk); |
| if (err) { |
| pr_err("Can't request %s clk (%d)", fixed_clock_dev->name, |
| err); |
| return err; |
| } |
| |
| /* |
| * set pllm factor accordingly to the external oscillator |
| * frequency (HSE). For STM32F4 and STM32F7, we want VCO |
| * freq at 1MHz |
| * if input PLL frequency is 25Mhz, divide it by 25 |
| */ |
| clk.id = 0; |
| priv->hse_rate = clk_get_rate(&clk); |
| |
| if (priv->hse_rate < 1000000) { |
| pr_err("%s: unexpected HSE clock rate = %ld \"n", __func__, |
| priv->hse_rate); |
| return -EINVAL; |
| } |
| |
| priv->info.sys_pll_psc.pll_m = priv->hse_rate / 1000000; |
| |
| if (priv->info.has_overdrive) { |
| err = dev_read_phandle_with_args(dev, "st,syscfg", NULL, 0, 0, |
| &args); |
| if (err) { |
| debug("%s: can't find syscon device (%d)\n", __func__, |
| err); |
| return err; |
| } |
| |
| priv->pwr_regs = (struct stm32_pwr_regs *)ofnode_get_addr(args.node); |
| } |
| |
| configure_clocks(dev); |
| |
| return 0; |
| } |
| |
| static int stm32_clk_of_xlate(struct clk *clk, struct ofnode_phandle_args *args) |
| { |
| debug("%s(clk=%p)\n", __func__, clk); |
| |
| if (args->args_count != 2) { |
| debug("Invaild args_count: %d\n", args->args_count); |
| return -EINVAL; |
| } |
| |
| if (args->args_count) |
| clk->id = args->args[1]; |
| else |
| clk->id = 0; |
| |
| return 0; |
| } |
| |
| static struct clk_ops stm32_clk_ops = { |
| .of_xlate = stm32_clk_of_xlate, |
| .enable = stm32_clk_enable, |
| .get_rate = stm32_clk_get_rate, |
| .set_rate = stm32_set_rate, |
| }; |
| |
| U_BOOT_DRIVER(stm32fx_clk) = { |
| .name = "stm32fx_rcc_clock", |
| .id = UCLASS_CLK, |
| .ops = &stm32_clk_ops, |
| .probe = stm32_clk_probe, |
| .priv_auto_alloc_size = sizeof(struct stm32_clk), |
| .flags = DM_FLAG_PRE_RELOC, |
| }; |