| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2021 Gateworks Corporation |
| */ |
| |
| #include "imx8mm-venice-u-boot.dtsi" |
| |
| &gpio1 { |
| m2pwren { |
| gpio-hog; |
| output-low; |
| gpios = <8 GPIO_ACTIVE_HIGH>; |
| line-name = "m2_pwren"; |
| }; |
| |
| m2rst { |
| gpio-hog; |
| output-low; |
| gpios = <13 GPIO_ACTIVE_HIGH>; |
| line-name = "m2_reset"; |
| }; |
| |
| m2wdis { |
| gpio-hog; |
| output-high; |
| gpios = <15 GPIO_ACTIVE_HIGH>; |
| line-name = "m2_wdis#"; |
| }; |
| }; |
| |
| &gpio2 { |
| uart2en { |
| gpio-hog; |
| output-high; |
| gpios = <8 GPIO_ACTIVE_HIGH>; |
| line-name = "uart2_en#"; |
| }; |
| }; |
| |
| &gpio3 { |
| m2gdis { |
| gpio-hog; |
| output-high; |
| gpios = <1 GPIO_ACTIVE_HIGH>; |
| line-name = "m2_gdis#"; |
| }; |
| |
| m2off { |
| gpio-hog; |
| output-high; |
| gpios = <7 GPIO_ACTIVE_HIGH>; |
| line-name = "m2_off#"; |
| }; |
| }; |
| |
| &gpio4 { |
| ampgpio3 { |
| gpio-hog; |
| input; |
| gpios = <11 GPIO_ACTIVE_HIGH>; |
| line-name = "amp_gpio3"; |
| }; |
| |
| ampgpio2 { |
| gpio-hog; |
| input; |
| gpios = <12 GPIO_ACTIVE_HIGH>; |
| line-name = "amp_gpio2"; |
| }; |
| |
| ampgpio1 { |
| gpio-hog; |
| input; |
| gpios = <14 GPIO_ACTIVE_HIGH>; |
| line-name = "amp_gpio1"; |
| }; |
| |
| ltrpwr { |
| gpio-hog; |
| output-low; |
| gpios = <16 GPIO_ACTIVE_HIGH>; |
| line-name = "lte_pwr#"; |
| }; |
| |
| lterst { |
| gpio-hog; |
| output-low; |
| gpios = <17 GPIO_ACTIVE_HIGH>; |
| line-name = "lte_rst"; |
| }; |
| |
| ampgpio4 { |
| gpio-hog; |
| input; |
| gpios = <20 GPIO_ACTIVE_HIGH>; |
| line-name = "amp_gpio4"; |
| }; |
| |
| appgpio1 { |
| gpio-hog; |
| input; |
| gpios = <21 GPIO_ACTIVE_HIGH>; |
| line-name = "app_gpio1"; |
| }; |
| |
| vdd4p0en { |
| gpio-hog; |
| output-low; |
| gpios = <22 GPIO_ACTIVE_HIGH>; |
| line-name = "vdd_4p0_en"; |
| }; |
| |
| uart1rs485 { |
| gpio-hog; |
| output-low; |
| gpios = <23 GPIO_ACTIVE_HIGH>; |
| line-name = "uart1_rs485"; |
| }; |
| |
| uart1term { |
| gpio-hog; |
| output-low; |
| gpios = <25 GPIO_ACTIVE_HIGH>; |
| line-name = "uart1_term"; |
| }; |
| |
| uart1half { |
| gpio-hog; |
| output-low; |
| gpios = <26 GPIO_ACTIVE_HIGH>; |
| line-name = "uart1_half"; |
| }; |
| |
| appgpio2 { |
| gpio-hog; |
| input; |
| gpios = <27 GPIO_ACTIVE_HIGH>; |
| line-name = "app_gpio2"; |
| }; |
| |
| mipigpio1 { |
| gpio-hog; |
| input; |
| gpios = <28 GPIO_ACTIVE_HIGH>; |
| line-name = "mipi_gpio1"; |
| }; |
| }; |
| |
| &gpio5 { |
| mipigpio4 { |
| gpio-hog; |
| input; |
| gpios = <3 GPIO_ACTIVE_HIGH>; |
| line-name = "mipi_gpio4"; |
| }; |
| |
| mipigpio3 { |
| gpio-hog; |
| input; |
| gpios = <4 GPIO_ACTIVE_HIGH>; |
| line-name = "mipi_gpio3"; |
| }; |
| |
| mipigpio2 { |
| gpio-hog; |
| input; |
| gpios = <5 GPIO_ACTIVE_HIGH>; |
| line-name = "mipi_gpio2"; |
| }; |
| }; |
| |
| &fec1 { |
| phy-reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; |
| phy-reset-duration = <1>; |
| phy-reset-post-delay = <300>; |
| }; |
| |
| &pinctrl_fec1 { |
| u-boot,dm-spl; |
| }; |
| |
| &{/soc@0/bus@30800000/i2c@30a20000/pmic@4b} { |
| u-boot,dm-spl; |
| }; |
| |
| &{/soc@0/bus@30800000/i2c@30a20000/pmic@4b/regulators} { |
| u-boot,dm-spl; |
| }; |
| |
| &pinctrl_pmic { |
| u-boot,dm-spl; |
| }; |