| /* |
| * Custom Boot configuration: |
| * 1. 8bit SD port (MMC1) |
| * 2. 4bit SD port (MMC2) |
| * 3. eMMC (MMC0) |
| */ |
| boot_targets=mmc1 mmc2 mmc0 usb pxe dhcp |
| |
| boot_file=zImage |
| boot_script_dhcp=boot.scr |
| console=ttyS0 |
| defargs=lp0_vec=2064@0xf46ff000 core_edp_mv=1150 core_edp_ma=4000 |
| usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0 |
| user_debug=30 pcie_aspm=off |
| dfu_alt_info=apalis-tk1.img raw 0x0 0x500 mmcpart 1; |
| boot part 0 1 mmcpart 0; |
| rootfs part 0 2 mmcpart 0; |
| zImage fat 0 1 mmcpart 0; |
| tegra124-apalis-eval.dtb fat 0 1 mmcpart 0 |
| fdt_board=eval |
| fdt_fixup=; |
| fdt_module=apalis-v1.2 |
| uboot_hwpart=1 |
| uboot_blk=0 |
| set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && |
| setexpr blkcnt ${blkcnt} / 0x200 |
| update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && |
| mmc write ${loadaddr} ${uboot_blk} ${blkcnt} |
| setethupdate=if env exists ethaddr; then; else setenv ethaddr |
| 00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} |
| flash_eth.img && source ${loadaddr} |
| setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; |
| load ${interface} ${drive}:1 ${loadaddr} flash_blk.img |
| || setenv drive 2; mmc rescan; load ${interface} ${drive}:1 |
| ${loadaddr} flash_blk.img && |
| source ${loadaddr} |
| setup=setenv setupargs igb_mac=${ethaddr} |
| consoleblank=0 no_console_suspend=1 console=tty1 |
| console=${console},${baudrate}n8 debug_uartport=lsport,0 |
| ${memargs} |
| setupdate=run setsdupdate || run setusbupdate || run setethupdate |
| setusbupdate=usb start && setenv interface usb; setenv drive 0; |
| load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && |
| source ${loadaddr} |
| vidargs=fbcon=map:1 |